{"id":2103692623969,"title":"AEM Electronics - CD-7 Carbon Digital Dash Display ( No Logging\/No Gps)","handle":"aem-electronics-cd-7-carbon-digital-dash-display-no-logging-no-gps-30-5700","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: AEM Electronics\u003cbr\u003ePart Number: 30-5700\u003cbr\u003eInformation Displayed: Oil Pressure,Oil Temperature,Water Temperature,Voltage,RPM,Vacuum,Exhaust Gas Temperature,Boost\u003cbr\u003eType: Standalone gauge\u003cbr\u003eComunication: Obd2,CAN,Analog\u003cbr\u003eDimension: Display\u003cbr\u003eIllumination Colour: Blue,Black,Yellow,Red,Green,White\u003cbr\u003eReading limitation : \u003cbr\u003eUnit: Imperial,Metric\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eVideo:\u003cbr\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/oSuhADFbBSc\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"true\" width=\"750\" height=\"422\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr\u003eAEM has updated its CD-7 Digital Dash Display from an aluminum enclosure to a carbon fiber composite enclosure and in the process has reduced its mass from 740g\/26.1 oz. to only 595g\/20.9oz. That’s almost 1\/3rd lbs. less and makes the CD-7 Carbon the lightest graphical dash of its size among major competitors! The new CD-7 Carbon digital displays also have optional integrated 20Hz GPS, which replaces the dash packages that included a Vehicle Dynamics Module. Of course, the Vehicle Dynamics Module still works with any CD Digital Dash Display and can be purchased separately.\u003cbr\u003e\u003cbr\u003eDevices Spec:\u003cbr\u003e\u003cbr\u003eFull color 7” screen with 800x480 resolution \u003cbr\u003eDirect sunlight readable (1000cd\/m2 brightness and anti-glare filter) \u003cbr\u003eLayout files interchangeable with all versions of the CD-5 Carbon \u003cbr\u003eWiring interface\/harness is identical to the CD-5 Carbon \u003cbr\u003eRugged, lightweight flow-molded carbon fiber composite enclosure \u003cbr\u003eTotal display weight of 20.9 oz. \/ 595 grams \u003cbr\u003eIP65 water resistance - open cockpit, marine and motorcycle safe \u003cbr\u003eAccepts channels from two separate user programmable CAN bus connections – works with AEMnet enabled devices and non-AEM 3rd party devices side by side \u003cbr\u003ePlug \u0026amp; Play Adapter Cables available for Holley, Link, MSD Atomic and Vi-Pec ECUs \u003cbr\u003eAccepts channels from 2008-up factory ECUs using Plug \u0026amp; Play OBDII CAN Adapter Cable (PN 30-2217, sold separately) \u003cbr\u003eInstall the CD-7 Carbon on carbureted and pre-2008 stock ECU-equipped vehicles using a 22 Channel CAN Sensor Module (PN 30-2212, sold separately) \u003cbr\u003eAvailable with or without 200Mb internal logging (up to 1,000Hz\/channel) \u003cbr\u003eAvailable with or without on-board 20Hz GPS receiver and antenna \u003cbr\u003eAdd a Vehicle Dynamics Module for GPS, 3-axis gyroscope and 3 axis accelerometer for G-loads, roll, pitch, yaw, track mapping and lap timing (PN 30-2206, sold separately) \u003cbr\u003eAdd an 8 Channel K-Type EGT CAN Module for 8 additional temps via AEMnet CAN bus (PN 30-2224, sold separately) \u003cbr\u003eSeven programmable pages including four Main pages, Alarm, On-Change and Start-up pages \u003cbr\u003eDedicated Alarm page quickly identifies problems, programmable in almost any language! (user defined) \u003cbr\u003eUnique On-Change page can be used to identify map switching for boost, traction, lap times, etc. \u003cbr\u003eUse included page layouts and input your channels and text, or create your own from scratch \u003cbr\u003eFree DashDesign Graphics Editor software \u003cbr\u003eSeven LED RPM\/shift light indicators on top of the housing (programmable and dimmable) \u003cbr\u003eTwo programmable LEDs \u003cbr\u003eOdometer function \u003cbr\u003eOver 200 supplied fully programmable SAE and custom warning icons, and you can add your own \u003cbr\u003e‘Headlight-in’ connection dims the dash and LEDs during night operation \u003cbr\u003eTwo extra switch inputs included for displaying user-triggered events (blinkers, high beams etc.) \u003cbr\u003eUser supplied graphics can be changed based on channel values (up to the full screen size) \u003cbr\u003eConvert CAN bus channel values to user-defined text in multiple languages\u003cstrong\u003e\u003cbr\u003e\u003cbr\u003eWhat is in the Box?\u003cbr\u003e\u003c\/strong\u003e30-5700 Contents:\u003cbr\u003e1 x CD-7 Carbon\u003cbr\u003e4 x AV Mount Hardware (attached to dash)\u003cbr\u003e1 x I\/O harness\u003cbr\u003e1 x power harness\u003cbr\u003e1 x USB communication cable\u003cbr\u003edocumentation\u003cbr\u003e\u003cbr\u003eKEEP IT SIMPLE OR GO HARDCORE\u003cbr\u003e\u003cbr\u003e CD-7 Carbon Dashes can simplify the update of an instrument cluster or ease the instrumentation configuration of a new vehicle build. Since the CD-7 Carbon only requires a single cable for power, ground and receiving CAN data, the wiring goes from complex to a simple one plug connection. Street rods, kit cars, and resto-mods using late-model crate engines no longer have to be concerned with adding a full set of gauges and trying to keep the wiring clean, or having to double up sensors on the engine so the ECU and gauges both have data – The CD-7 Carbon can see everything the ECU is seeing via a single cable connection – and that means so can you!\u003cbr\u003e\u003cbr\u003e Want to go hardcore? CD-7 Carbon Dashes make it easy. Add additional sensor data with our 22 Channel CAN Sensor Module, create custom layouts, integrate track mapping and data logging for driver coaching, see predictive and actual lap times and set user-defined prioritized alarms - it's all possible with the CD-7 Carbon Dash. Simple or Hardcore; the choice is yours and the CD-7 Carbon's capabilities are nearly limitless.\u003cbr\u003e\u003cbr\u003e VIEW AND LOG DATA FROM OVER 250 CAN DEVICES!\u003cbr\u003e\u003cbr\u003e The CD-7 Carbon receives channels from CAN bus inputs and it does not require special modules to read AEM and\/or 3rd-party CAN signals. It communicates with 45 AEM devices, is in-house tested to work with 230 non-AEM devices and we have DBC CAN files for 60 more non-AEM devices. See a complete list of validated non-AEM devices by clicking here.\u003cbr\u003e AEM engineers have created templates for some non-AEM CAN bus devices in the CD-7 Carbon’s free DashDesign software, and we add more every time we update the software. All 3rd Party platform-specific templates in DashDesign include CAN definitions and do not require uploading a DBC file; however, the upload of 3rd party DBC CAN files to the software will be necessary for proper operation if they are not yet included in our software. We make it easy though! These files are available in our Forum, allowing you to make the connection to a CD-7 Carbon dash regardless of whatever engine management, data logger or CAN-based device you are using.\u003cbr\u003e The bus configuration and messages are fully configurable; it even supports indexed messages. Custom CAN configurations can be imported via industry standard DBC files or the user can manually enter each message and channel. The user can then rename, filter, calibrate, change units and log any CAN channel, as well as direct these channels to inputs on our pre-defined or user-created templates.\u003cbr\u003e\u003cbr\u003e VIEW AND LOG DATA FROM LS CRATE ENGINES\u003cbr\u003e\u003cbr\u003e AEM CD dashes have been in-house validated to communicate with the GM E67 ECU for LS Crate engines click here for the setup guide. The CD dashes receive OBDII CAN bus channels from the bulkhead connector in the stock wiring harness, leaving the OBDII port open for diagnostic or tuning purposes.\u003cbr\u003e\u003cbr\u003e VIEW AND LOG DATA FROM 08-UP LATE MODEL STOCK ECUS\u003cbr\u003e\u003cbr\u003e CD-7 Carbon Digital Dash Displays have the ability to read CAN bus data from the OBDII port of 2008-up vehicles with a simple installation of our OBDII CAN Adapter Sub Harness (PN 30-2217, sold separately). This cable provides plug \u0026amp; play access between the CD- Carbon’s harness and the vehicles OBDII connector and provides approximately 20-40 channels of data from the stock ECU.\u003cbr\u003e VIEW AND LOG DATA ON VEHICLES WITH CARBURETORS OR PRE-2008 STOCK ECUS\u003cbr\u003e\u003cbr\u003e AEM’s 22 Channel CAN Sensor Module (PN 30-2212, sold separately) lets you get data onto the Dash in a carbureted vehicle or a pre-2008 EFI vehicle using the stock ECU. It converts analog, digital and frequency inputs into an AEMnet CAN bus signal that can be transmitted to the CD-7 Carbon Dash for viewing and\/or data logging, including tachometer and fuel level, wheel speed inputs for MPH, and inputs for pressure\/temp sensors. Need more than 22 channels? You can daisy-chain two of the Modules together, which is ideal if you have a logging CD Dash and want to log more channels.\u003cbr\u003e\u003cbr\u003e ADD 8 ADDITIONAL TEMP INPUTS WITH OUR 8 CHANNEL K-TYPE EGT MODULE\u003cbr\u003e Our 8 Channel K-Type EGT Module (PN 30-2224, sold separately) allows racers and enthusiasts to install eight K-type thermocouple sensors onto their vehicle and transmit all 8 temp channels to a CD Carbon Digital Dash via a one-plug CAN bus connection.\u003cbr\u003e\u003cbr\u003e LOGGING, TRACK MAPPING, SPEEDO and ODO CAPABILITIES\u003cbr\u003e CD-7 Carbon dashes are available with a 200MB onboard logger (CD-7L\/LG), which provides about 24 hours of logging time at up to 1,000 Hz\/channel. It will accept as many channels as are available from either of the CAN bus inputs and we have tested it to accept up to 800 channels. Individual channel log speeds are adjustable.\u003cbr\u003e The CD-7 Carbon and CD-7L Carbon are available with an internal GPS receiver and antenna (CD-7G \u0026amp; CD-7LG), which provides coordinates for creating track maps, viewing\/recording lap times and split times, and seeing predictive lap times on the display with a live Gain\/Loss value or for the use of a Speedometer and\/or Odometer.\u003cbr\u003e Racers looking for acceleration forces and vehicle dynamics channels in addition to GPS can purchase a Vehicle Dynamics Module (VDM, PN 30-2206, sold separately). The VDM includes a GPS receiver and antenna, a 3-axis gyroscope for viewing and recording roll, pitch and yaw, and a 3-axis accelerometer for collecting longitudinal, lateral and vertical acceleration.\u003cbr\u003e\u003cbr\u003e UNLIMITED ALARMS AND WARNING TEXT\u003cbr\u003e\u003cbr\u003e The CD-7 Carbon’s warning and alarm features put an end to obscure warning LEDs! DashDesign software features a powerful alarm editor to create warning alerts and alarms for any incoming channel using customizable text in almost any language. This allows you to see warnings and alarms with text values that you can program and eliminates having to guess the meaning behind a triggered warning LED or generic alarm like a check engine light.\u003cbr\u003e We designed a dedicated alarm page that brings your attention to the dash in the event of a potentially catastrophic issue. The CD-7 Carbon triggers the alarm page whenever a user definable condition is met. This includes the status of the channel that triggered the alarm (for example, low oil pressure, low fuel pressure, high coolant temp, etc.), and if multiple alarm conditions are present, the CD-7 Carbon will scroll them on the screen in order of priority so you are aware of every critical alarm condition. This user-defined and user-prioritized scrollable feature is included for text warnings on the main pages as well.\u003cbr\u003e\u003cbr\u003e SEVEN PAGES TOTAL, ALL CUSTOM CONFIGURABLE\u003cbr\u003e\u003cbr\u003e The CD-7 Carbon Digital Displays are fully configurable and completely unlocked, so you will never pay for additional software features. They include seven total pages; a startup page, four main pages for viewing channels that can be toggled using the left button on the housing, a unique ‘On-Change’ page and a dedicated Alarm event page. All pages are 100% customizable; Use our layouts or create your own and put whatever channels you want wherever you want on the screen.\u003cbr\u003e\u003cbr\u003e THREE EVENT TRIGGERED PAGES\u003cbr\u003e\u003cbr\u003e Three event-based pages ensure that you do not miss any critical changes to the vehicle’s operating state. One is an alarm page. The CD-7 Carbon dash will display the alarm page whenever a user-definable condition is met. This page remains active until it is cleared by pressing the left button on the housing. The second event-based page is an On-Change page. The On-Change page is perfect for knowing what map you are on if you have map switching for different boost levels or traction control, and for viewing lap time, split time, etc., whenever you pass the start\/stop beacon on the racetrack (beacon must be configured before racing). It is perfect for seeing user-defined momentary changes without having to add additional channels to your main pages.\u003cbr\u003e\u003cbr\u003e The third event page is a Start-Up page that is triggered every time the dash powers up. You can program whatever splash screen graphics you want, such as team, company or sponsor logos and photos.\u003cbr\u003e\u003cbr\u003e FREE DASHDESIGN GRAPHICS EDITOR SOFTWARE\u003cbr\u003e\u003cbr\u003e Our DashDesign Screen Editing software is free and allows users to create and customize all of the different pages in the CD-7 Carbon dash. You can assign incoming channels to the supplied layouts or create your own from scratch, the only limit is your imagination! We provide multiple layouts and themes to accommodate most styles and types of racing. We add new layouts when we update the software, and make them available for download at no charge.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003c\/p\u003e\n\u003chr\u003e\n\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003ePlease note that depending on car year, model and ECU used you may be required to use optional AEM Products:\u003cbr\u003e\u003cbr\u003eOBD2 Car using CAN Language (Most European Cars after 2008): The dash will be plug and play.\u003cbr\u003e\u003cbr\u003eOBD2 Car after 2008* using non CAN Language (Most Japanese Car): Please use AEM Electronics 30-2217, this OBDII Plug \u0026amp; Play Adapter Harness connects to OBDII port and sends available channels to CD-5\/7 Dash.\u003cbr\u003e*Please note that it will ONLY read information available within your engine datas.\u003cbr\u003e\u003cbr\u003eOBD2 and Non OBD2 Car pre 2008* : You will need to use a CAN Sensor Module to collects analog information and translate them to CAN. Two modules are available:\u003cbr\u003e\u003cbr\u003e30-2226 \u003cbr\u003eAEM’s 6 Channel CAN Sensor Module provides an affordable and easy way to add temperature, pressure, fuel level, and tachometer signals on to a CD Carbon Digital dash through AEMnet CAN bus! It’s perfect for users with carbureted vehicles who just need to see the basics, and for stock ECU and standalone ECU users who just need some additional inputs.\u003cbr\u003e\u003cbr\u003e30-2212\u003cbr\u003eAEM’s 22 Channel CAN Sensor Module (PN 30-2212) converts analog, digital and frequency inputs into an AEMnet CAN bus signal that can be transmitted to the CD-5 Carbon and CD-7 Digital Dashes. This expansion module provides a way for users with carbureted vehicles to add a CD Dash, and lets users with existing CAN-based devices add more channels to the display for viewing and\/or data logging (data logging requires CD-5L Carbon or CD-7L logging Dashes). The 22-Channel CAN Sensor Module is compatible with the CD Dashes only; it will run in parallel with 3rd party CAN devices on the CD dashes but it is currently not compatible with AEM’s AQ-1 Data Logger, Series 2 or Infinity ECUs, or 3rd party ECUs or loggers.\u003cbr\u003e\u003cbr\u003eFor other Standalone ECU :\u003cbr\u003e\u003cbr\u003e30-2213 – CD-7 Plug \u0026amp; Play Adapter Cable for MSD Atomic TBI\u003cbr\u003e30-2214 – CD-7 Plug \u0026amp; Play Adapter Cable for Holley EFI\u003cbr\u003e30-2215 – CD-7 Plug \u0026amp; Play Adapter Cable for Vi-Pec and Link ECUs\u003cbr\u003e30-2216 – Polaris RZR Plug \u0026amp; Play Adapter Harness\u003cbr\u003e\u003cbr\u003ePlease contact us if you have any other questions.\u003c!--split--\u003e","published_at":"2019-05-01T16:07:52+08:00","created_at":"2019-05-01T16:07:52+08:00","vendor":"AEM Electronics","type":"Display - Gauges - Sensors","tags":["aem-electronics","aem-electronics42.4","analog","boost","can","clearance","display-gauges-sensors","exhaust-gas-temperature","gauges-displays","gc-black","gc-blue","gc-green","gc-red","gc-white","gc-yellow","gd-display","imperial","metric","obd2","oil-pressure","oil-temperature","rpm","standalone-gauge","tva","Universal","vacuum","voltage","water-temperature"],"price":132100,"price_min":132100,"price_max":132100,"available":true,"price_varies":false,"compare_at_price":194300,"compare_at_price_min":194300,"compare_at_price_max":194300,"compare_at_price_varies":false,"variants":[{"id":19808132464737,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"30-5700","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"AEM Electronics - CD-7 Carbon Digital Dash Display ( No Logging\/No Gps)","public_title":null,"options":["Default Title"],"price":132100,"weight":2200,"compare_at_price":194300,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn2.shopify.com\/s\/files\/1\/2343\/5009\/products\/cd7-carbon-web-header-image_0_8bff8995-55f5-4131-98e9-f92a7ae9ef07.png?v=1556702307","\/\/cdn2.shopify.com\/s\/files\/1\/2343\/5009\/products\/30-5700_216e3c3c-52f8-4ec4-972b-97a087ee379b.jpg?v=1556702307","\/\/cdn2.shopify.com\/s\/files\/1\/2343\/5009\/products\/cd-7-carbon-dims-rear_e921a975-ac2d-42af-89ea-8c3b824b6689.jpg?v=1556702307"],"featured_image":"\/\/cdn2.shopify.com\/s\/files\/1\/2343\/5009\/products\/cd7-carbon-web-header-image_0_8bff8995-55f5-4131-98e9-f92a7ae9ef07.png?v=1556702307","options":["Title"],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: AEM Electronics\u003cbr\u003ePart Number: 30-5700\u003cbr\u003eInformation Displayed: Oil Pressure,Oil Temperature,Water Temperature,Voltage,RPM,Vacuum,Exhaust Gas Temperature,Boost\u003cbr\u003eType: Standalone gauge\u003cbr\u003eComunication: Obd2,CAN,Analog\u003cbr\u003eDimension: Display\u003cbr\u003eIllumination Colour: Blue,Black,Yellow,Red,Green,White\u003cbr\u003eReading limitation : \u003cbr\u003eUnit: Imperial,Metric\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eVideo:\u003cbr\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/oSuhADFbBSc\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"true\" width=\"750\" height=\"422\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr\u003eAEM has updated its CD-7 Digital Dash Display from an aluminum enclosure to a carbon fiber composite enclosure and in the process has reduced its mass from 740g\/26.1 oz. to only 595g\/20.9oz. That’s almost 1\/3rd lbs. less and makes the CD-7 Carbon the lightest graphical dash of its size among major competitors! The new CD-7 Carbon digital displays also have optional integrated 20Hz GPS, which replaces the dash packages that included a Vehicle Dynamics Module. Of course, the Vehicle Dynamics Module still works with any CD Digital Dash Display and can be purchased separately.\u003cbr\u003e\u003cbr\u003eDevices Spec:\u003cbr\u003e\u003cbr\u003eFull color 7” screen with 800x480 resolution \u003cbr\u003eDirect sunlight readable (1000cd\/m2 brightness and anti-glare filter) \u003cbr\u003eLayout files interchangeable with all versions of the CD-5 Carbon \u003cbr\u003eWiring interface\/harness is identical to the CD-5 Carbon \u003cbr\u003eRugged, lightweight flow-molded carbon fiber composite enclosure \u003cbr\u003eTotal display weight of 20.9 oz. \/ 595 grams \u003cbr\u003eIP65 water resistance - open cockpit, marine and motorcycle safe \u003cbr\u003eAccepts channels from two separate user programmable CAN bus connections – works with AEMnet enabled devices and non-AEM 3rd party devices side by side \u003cbr\u003ePlug \u0026amp; Play Adapter Cables available for Holley, Link, MSD Atomic and Vi-Pec ECUs \u003cbr\u003eAccepts channels from 2008-up factory ECUs using Plug \u0026amp; Play OBDII CAN Adapter Cable (PN 30-2217, sold separately) \u003cbr\u003eInstall the CD-7 Carbon on carbureted and pre-2008 stock ECU-equipped vehicles using a 22 Channel CAN Sensor Module (PN 30-2212, sold separately) \u003cbr\u003eAvailable with or without 200Mb internal logging (up to 1,000Hz\/channel) \u003cbr\u003eAvailable with or without on-board 20Hz GPS receiver and antenna \u003cbr\u003eAdd a Vehicle Dynamics Module for GPS, 3-axis gyroscope and 3 axis accelerometer for G-loads, roll, pitch, yaw, track mapping and lap timing (PN 30-2206, sold separately) \u003cbr\u003eAdd an 8 Channel K-Type EGT CAN Module for 8 additional temps via AEMnet CAN bus (PN 30-2224, sold separately) \u003cbr\u003eSeven programmable pages including four Main pages, Alarm, On-Change and Start-up pages \u003cbr\u003eDedicated Alarm page quickly identifies problems, programmable in almost any language! (user defined) \u003cbr\u003eUnique On-Change page can be used to identify map switching for boost, traction, lap times, etc. \u003cbr\u003eUse included page layouts and input your channels and text, or create your own from scratch \u003cbr\u003eFree DashDesign Graphics Editor software \u003cbr\u003eSeven LED RPM\/shift light indicators on top of the housing (programmable and dimmable) \u003cbr\u003eTwo programmable LEDs \u003cbr\u003eOdometer function \u003cbr\u003eOver 200 supplied fully programmable SAE and custom warning icons, and you can add your own \u003cbr\u003e‘Headlight-in’ connection dims the dash and LEDs during night operation \u003cbr\u003eTwo extra switch inputs included for displaying user-triggered events (blinkers, high beams etc.) \u003cbr\u003eUser supplied graphics can be changed based on channel values (up to the full screen size) \u003cbr\u003eConvert CAN bus channel values to user-defined text in multiple languages\u003cstrong\u003e\u003cbr\u003e\u003cbr\u003eWhat is in the Box?\u003cbr\u003e\u003c\/strong\u003e30-5700 Contents:\u003cbr\u003e1 x CD-7 Carbon\u003cbr\u003e4 x AV Mount Hardware (attached to dash)\u003cbr\u003e1 x I\/O harness\u003cbr\u003e1 x power harness\u003cbr\u003e1 x USB communication cable\u003cbr\u003edocumentation\u003cbr\u003e\u003cbr\u003eKEEP IT SIMPLE OR GO HARDCORE\u003cbr\u003e\u003cbr\u003e CD-7 Carbon Dashes can simplify the update of an instrument cluster or ease the instrumentation configuration of a new vehicle build. Since the CD-7 Carbon only requires a single cable for power, ground and receiving CAN data, the wiring goes from complex to a simple one plug connection. Street rods, kit cars, and resto-mods using late-model crate engines no longer have to be concerned with adding a full set of gauges and trying to keep the wiring clean, or having to double up sensors on the engine so the ECU and gauges both have data – The CD-7 Carbon can see everything the ECU is seeing via a single cable connection – and that means so can you!\u003cbr\u003e\u003cbr\u003e Want to go hardcore? CD-7 Carbon Dashes make it easy. Add additional sensor data with our 22 Channel CAN Sensor Module, create custom layouts, integrate track mapping and data logging for driver coaching, see predictive and actual lap times and set user-defined prioritized alarms - it's all possible with the CD-7 Carbon Dash. Simple or Hardcore; the choice is yours and the CD-7 Carbon's capabilities are nearly limitless.\u003cbr\u003e\u003cbr\u003e VIEW AND LOG DATA FROM OVER 250 CAN DEVICES!\u003cbr\u003e\u003cbr\u003e The CD-7 Carbon receives channels from CAN bus inputs and it does not require special modules to read AEM and\/or 3rd-party CAN signals. It communicates with 45 AEM devices, is in-house tested to work with 230 non-AEM devices and we have DBC CAN files for 60 more non-AEM devices. See a complete list of validated non-AEM devices by clicking here.\u003cbr\u003e AEM engineers have created templates for some non-AEM CAN bus devices in the CD-7 Carbon’s free DashDesign software, and we add more every time we update the software. All 3rd Party platform-specific templates in DashDesign include CAN definitions and do not require uploading a DBC file; however, the upload of 3rd party DBC CAN files to the software will be necessary for proper operation if they are not yet included in our software. We make it easy though! These files are available in our Forum, allowing you to make the connection to a CD-7 Carbon dash regardless of whatever engine management, data logger or CAN-based device you are using.\u003cbr\u003e The bus configuration and messages are fully configurable; it even supports indexed messages. Custom CAN configurations can be imported via industry standard DBC files or the user can manually enter each message and channel. The user can then rename, filter, calibrate, change units and log any CAN channel, as well as direct these channels to inputs on our pre-defined or user-created templates.\u003cbr\u003e\u003cbr\u003e VIEW AND LOG DATA FROM LS CRATE ENGINES\u003cbr\u003e\u003cbr\u003e AEM CD dashes have been in-house validated to communicate with the GM E67 ECU for LS Crate engines click here for the setup guide. The CD dashes receive OBDII CAN bus channels from the bulkhead connector in the stock wiring harness, leaving the OBDII port open for diagnostic or tuning purposes.\u003cbr\u003e\u003cbr\u003e VIEW AND LOG DATA FROM 08-UP LATE MODEL STOCK ECUS\u003cbr\u003e\u003cbr\u003e CD-7 Carbon Digital Dash Displays have the ability to read CAN bus data from the OBDII port of 2008-up vehicles with a simple installation of our OBDII CAN Adapter Sub Harness (PN 30-2217, sold separately). This cable provides plug \u0026amp; play access between the CD- Carbon’s harness and the vehicles OBDII connector and provides approximately 20-40 channels of data from the stock ECU.\u003cbr\u003e VIEW AND LOG DATA ON VEHICLES WITH CARBURETORS OR PRE-2008 STOCK ECUS\u003cbr\u003e\u003cbr\u003e AEM’s 22 Channel CAN Sensor Module (PN 30-2212, sold separately) lets you get data onto the Dash in a carbureted vehicle or a pre-2008 EFI vehicle using the stock ECU. It converts analog, digital and frequency inputs into an AEMnet CAN bus signal that can be transmitted to the CD-7 Carbon Dash for viewing and\/or data logging, including tachometer and fuel level, wheel speed inputs for MPH, and inputs for pressure\/temp sensors. Need more than 22 channels? You can daisy-chain two of the Modules together, which is ideal if you have a logging CD Dash and want to log more channels.\u003cbr\u003e\u003cbr\u003e ADD 8 ADDITIONAL TEMP INPUTS WITH OUR 8 CHANNEL K-TYPE EGT MODULE\u003cbr\u003e Our 8 Channel K-Type EGT Module (PN 30-2224, sold separately) allows racers and enthusiasts to install eight K-type thermocouple sensors onto their vehicle and transmit all 8 temp channels to a CD Carbon Digital Dash via a one-plug CAN bus connection.\u003cbr\u003e\u003cbr\u003e LOGGING, TRACK MAPPING, SPEEDO and ODO CAPABILITIES\u003cbr\u003e CD-7 Carbon dashes are available with a 200MB onboard logger (CD-7L\/LG), which provides about 24 hours of logging time at up to 1,000 Hz\/channel. It will accept as many channels as are available from either of the CAN bus inputs and we have tested it to accept up to 800 channels. Individual channel log speeds are adjustable.\u003cbr\u003e The CD-7 Carbon and CD-7L Carbon are available with an internal GPS receiver and antenna (CD-7G \u0026amp; CD-7LG), which provides coordinates for creating track maps, viewing\/recording lap times and split times, and seeing predictive lap times on the display with a live Gain\/Loss value or for the use of a Speedometer and\/or Odometer.\u003cbr\u003e Racers looking for acceleration forces and vehicle dynamics channels in addition to GPS can purchase a Vehicle Dynamics Module (VDM, PN 30-2206, sold separately). The VDM includes a GPS receiver and antenna, a 3-axis gyroscope for viewing and recording roll, pitch and yaw, and a 3-axis accelerometer for collecting longitudinal, lateral and vertical acceleration.\u003cbr\u003e\u003cbr\u003e UNLIMITED ALARMS AND WARNING TEXT\u003cbr\u003e\u003cbr\u003e The CD-7 Carbon’s warning and alarm features put an end to obscure warning LEDs! DashDesign software features a powerful alarm editor to create warning alerts and alarms for any incoming channel using customizable text in almost any language. This allows you to see warnings and alarms with text values that you can program and eliminates having to guess the meaning behind a triggered warning LED or generic alarm like a check engine light.\u003cbr\u003e We designed a dedicated alarm page that brings your attention to the dash in the event of a potentially catastrophic issue. The CD-7 Carbon triggers the alarm page whenever a user definable condition is met. This includes the status of the channel that triggered the alarm (for example, low oil pressure, low fuel pressure, high coolant temp, etc.), and if multiple alarm conditions are present, the CD-7 Carbon will scroll them on the screen in order of priority so you are aware of every critical alarm condition. This user-defined and user-prioritized scrollable feature is included for text warnings on the main pages as well.\u003cbr\u003e\u003cbr\u003e SEVEN PAGES TOTAL, ALL CUSTOM CONFIGURABLE\u003cbr\u003e\u003cbr\u003e The CD-7 Carbon Digital Displays are fully configurable and completely unlocked, so you will never pay for additional software features. They include seven total pages; a startup page, four main pages for viewing channels that can be toggled using the left button on the housing, a unique ‘On-Change’ page and a dedicated Alarm event page. All pages are 100% customizable; Use our layouts or create your own and put whatever channels you want wherever you want on the screen.\u003cbr\u003e\u003cbr\u003e THREE EVENT TRIGGERED PAGES\u003cbr\u003e\u003cbr\u003e Three event-based pages ensure that you do not miss any critical changes to the vehicle’s operating state. One is an alarm page. The CD-7 Carbon dash will display the alarm page whenever a user-definable condition is met. This page remains active until it is cleared by pressing the left button on the housing. The second event-based page is an On-Change page. The On-Change page is perfect for knowing what map you are on if you have map switching for different boost levels or traction control, and for viewing lap time, split time, etc., whenever you pass the start\/stop beacon on the racetrack (beacon must be configured before racing). It is perfect for seeing user-defined momentary changes without having to add additional channels to your main pages.\u003cbr\u003e\u003cbr\u003e The third event page is a Start-Up page that is triggered every time the dash powers up. You can program whatever splash screen graphics you want, such as team, company or sponsor logos and photos.\u003cbr\u003e\u003cbr\u003e FREE DASHDESIGN GRAPHICS EDITOR SOFTWARE\u003cbr\u003e\u003cbr\u003e Our DashDesign Screen Editing software is free and allows users to create and customize all of the different pages in the CD-7 Carbon dash. You can assign incoming channels to the supplied layouts or create your own from scratch, the only limit is your imagination! We provide multiple layouts and themes to accommodate most styles and types of racing. We add new layouts when we update the software, and make them available for download at no charge.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003c\/p\u003e\n\u003chr\u003e\n\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003ePlease note that depending on car year, model and ECU used you may be required to use optional AEM Products:\u003cbr\u003e\u003cbr\u003eOBD2 Car using CAN Language (Most European Cars after 2008): The dash will be plug and play.\u003cbr\u003e\u003cbr\u003eOBD2 Car after 2008* using non CAN Language (Most Japanese Car): Please use AEM Electronics 30-2217, this OBDII Plug \u0026amp; Play Adapter Harness connects to OBDII port and sends available channels to CD-5\/7 Dash.\u003cbr\u003e*Please note that it will ONLY read information available within your engine datas.\u003cbr\u003e\u003cbr\u003eOBD2 and Non OBD2 Car pre 2008* : You will need to use a CAN Sensor Module to collects analog information and translate them to CAN. Two modules are available:\u003cbr\u003e\u003cbr\u003e30-2226 \u003cbr\u003eAEM’s 6 Channel CAN Sensor Module provides an affordable and easy way to add temperature, pressure, fuel level, and tachometer signals on to a CD Carbon Digital dash through AEMnet CAN bus! It’s perfect for users with carbureted vehicles who just need to see the basics, and for stock ECU and standalone ECU users who just need some additional inputs.\u003cbr\u003e\u003cbr\u003e30-2212\u003cbr\u003eAEM’s 22 Channel CAN Sensor Module (PN 30-2212) converts analog, digital and frequency inputs into an AEMnet CAN bus signal that can be transmitted to the CD-5 Carbon and CD-7 Digital Dashes. This expansion module provides a way for users with carbureted vehicles to add a CD Dash, and lets users with existing CAN-based devices add more channels to the display for viewing and\/or data logging (data logging requires CD-5L Carbon or CD-7L logging Dashes). The 22-Channel CAN Sensor Module is compatible with the CD Dashes only; it will run in parallel with 3rd party CAN devices on the CD dashes but it is currently not compatible with AEM’s AQ-1 Data Logger, Series 2 or Infinity ECUs, or 3rd party ECUs or loggers.\u003cbr\u003e\u003cbr\u003eFor other Standalone ECU :\u003cbr\u003e\u003cbr\u003e30-2213 – CD-7 Plug \u0026amp; Play Adapter Cable for MSD Atomic TBI\u003cbr\u003e30-2214 – CD-7 Plug \u0026amp; Play Adapter Cable for Holley EFI\u003cbr\u003e30-2215 – CD-7 Plug \u0026amp; Play Adapter Cable for Vi-Pec and Link ECUs\u003cbr\u003e30-2216 – Polaris RZR Plug \u0026amp; Play Adapter Harness\u003cbr\u003e\u003cbr\u003ePlease contact us if you have any other questions.\u003c!--split--\u003e"}

AEM Electronics - CD-7 Carbon Digital Dash Display ( No Logging/No Gps)

Check products, lead time and fitting infos in the tabs below!
Sku: 30-5700
Availability: More than 10 in Stock in our US Warehouse.
Shipping time is additional.
USD 1,321.00 USD 1,943.00
Maximum quantity available reached.
Specifications:
Manufacturer: AEM Electronics
Part Number: 30-5700
Information Displayed: Oil Pressure,Oil Temperature,Water Temperature,Voltage,RPM,Vacuum,Exhaust Gas Temperature,Boost
Type: Standalone gauge
Comunication: Obd2,CAN,Analog
Dimension: Display
Illumination Colour: Blue,Black,Yellow,Red,Green,White
Reading limitation :
Unit: Imperial,Metric


Video:


AEM has updated its CD-7 Digital Dash Display from an aluminum enclosure to a carbon fiber composite enclosure and in the process has reduced its mass from 740g/26.1 oz. to only 595g/20.9oz. That’s almost 1/3rd lbs. less and makes the CD-7 Carbon the lightest graphical dash of its size among major competitors! The new CD-7 Carbon digital displays also have optional integrated 20Hz GPS, which replaces the dash packages that included a Vehicle Dynamics Module. Of course, the Vehicle Dynamics Module still works with any CD Digital Dash Display and can be purchased separately.

Devices Spec:

Full color 7” screen with 800x480 resolution
Direct sunlight readable (1000cd/m2 brightness and anti-glare filter)
Layout files interchangeable with all versions of the CD-5 Carbon
Wiring interface/harness is identical to the CD-5 Carbon
Rugged, lightweight flow-molded carbon fiber composite enclosure
Total display weight of 20.9 oz. / 595 grams
IP65 water resistance - open cockpit, marine and motorcycle safe
Accepts channels from two separate user programmable CAN bus connections – works with AEMnet enabled devices and non-AEM 3rd party devices side by side
Plug & Play Adapter Cables available for Holley, Link, MSD Atomic and Vi-Pec ECUs
Accepts channels from 2008-up factory ECUs using Plug & Play OBDII CAN Adapter Cable (PN 30-2217, sold separately)
Install the CD-7 Carbon on carbureted and pre-2008 stock ECU-equipped vehicles using a 22 Channel CAN Sensor Module (PN 30-2212, sold separately)
Available with or without 200Mb internal logging (up to 1,000Hz/channel)
Available with or without on-board 20Hz GPS receiver and antenna
Add a Vehicle Dynamics Module for GPS, 3-axis gyroscope and 3 axis accelerometer for G-loads, roll, pitch, yaw, track mapping and lap timing (PN 30-2206, sold separately)
Add an 8 Channel K-Type EGT CAN Module for 8 additional temps via AEMnet CAN bus (PN 30-2224, sold separately)
Seven programmable pages including four Main pages, Alarm, On-Change and Start-up pages
Dedicated Alarm page quickly identifies problems, programmable in almost any language! (user defined)
Unique On-Change page can be used to identify map switching for boost, traction, lap times, etc.
Use included page layouts and input your channels and text, or create your own from scratch
Free DashDesign Graphics Editor software
Seven LED RPM/shift light indicators on top of the housing (programmable and dimmable)
Two programmable LEDs
Odometer function
Over 200 supplied fully programmable SAE and custom warning icons, and you can add your own
‘Headlight-in’ connection dims the dash and LEDs during night operation
Two extra switch inputs included for displaying user-triggered events (blinkers, high beams etc.)
User supplied graphics can be changed based on channel values (up to the full screen size)
Convert CAN bus channel values to user-defined text in multiple languages

What is in the Box?
30-5700 Contents:
1 x CD-7 Carbon
4 x AV Mount Hardware (attached to dash)
1 x I/O harness
1 x power harness
1 x USB communication cable
documentation

KEEP IT SIMPLE OR GO HARDCORE

CD-7 Carbon Dashes can simplify the update of an instrument cluster or ease the instrumentation configuration of a new vehicle build. Since the CD-7 Carbon only requires a single cable for power, ground and receiving CAN data, the wiring goes from complex to a simple one plug connection. Street rods, kit cars, and resto-mods using late-model crate engines no longer have to be concerned with adding a full set of gauges and trying to keep the wiring clean, or having to double up sensors on the engine so the ECU and gauges both have data – The CD-7 Carbon can see everything the ECU is seeing via a single cable connection – and that means so can you!

Want to go hardcore? CD-7 Carbon Dashes make it easy. Add additional sensor data with our 22 Channel CAN Sensor Module, create custom layouts, integrate track mapping and data logging for driver coaching, see predictive and actual lap times and set user-defined prioritized alarms - it's all possible with the CD-7 Carbon Dash. Simple or Hardcore; the choice is yours and the CD-7 Carbon's capabilities are nearly limitless.

VIEW AND LOG DATA FROM OVER 250 CAN DEVICES!

The CD-7 Carbon receives channels from CAN bus inputs and it does not require special modules to read AEM and/or 3rd-party CAN signals. It communicates with 45 AEM devices, is in-house tested to work with 230 non-AEM devices and we have DBC CAN files for 60 more non-AEM devices. See a complete list of validated non-AEM devices by clicking here.
AEM engineers have created templates for some non-AEM CAN bus devices in the CD-7 Carbon’s free DashDesign software, and we add more every time we update the software. All 3rd Party platform-specific templates in DashDesign include CAN definitions and do not require uploading a DBC file; however, the upload of 3rd party DBC CAN files to the software will be necessary for proper operation if they are not yet included in our software. We make it easy though! These files are available in our Forum, allowing you to make the connection to a CD-7 Carbon dash regardless of whatever engine management, data logger or CAN-based device you are using.
The bus configuration and messages are fully configurable; it even supports indexed messages. Custom CAN configurations can be imported via industry standard DBC files or the user can manually enter each message and channel. The user can then rename, filter, calibrate, change units and log any CAN channel, as well as direct these channels to inputs on our pre-defined or user-created templates.

VIEW AND LOG DATA FROM LS CRATE ENGINES

AEM CD dashes have been in-house validated to communicate with the GM E67 ECU for LS Crate engines click here for the setup guide. The CD dashes receive OBDII CAN bus channels from the bulkhead connector in the stock wiring harness, leaving the OBDII port open for diagnostic or tuning purposes.

VIEW AND LOG DATA FROM 08-UP LATE MODEL STOCK ECUS

CD-7 Carbon Digital Dash Displays have the ability to read CAN bus data from the OBDII port of 2008-up vehicles with a simple installation of our OBDII CAN Adapter Sub Harness (PN 30-2217, sold separately). This cable provides plug & play access between the CD- Carbon’s harness and the vehicles OBDII connector and provides approximately 20-40 channels of data from the stock ECU.
VIEW AND LOG DATA ON VEHICLES WITH CARBURETORS OR PRE-2008 STOCK ECUS

AEM’s 22 Channel CAN Sensor Module (PN 30-2212, sold separately) lets you get data onto the Dash in a carbureted vehicle or a pre-2008 EFI vehicle using the stock ECU. It converts analog, digital and frequency inputs into an AEMnet CAN bus signal that can be transmitted to the CD-7 Carbon Dash for viewing and/or data logging, including tachometer and fuel level, wheel speed inputs for MPH, and inputs for pressure/temp sensors. Need more than 22 channels? You can daisy-chain two of the Modules together, which is ideal if you have a logging CD Dash and want to log more channels.

ADD 8 ADDITIONAL TEMP INPUTS WITH OUR 8 CHANNEL K-TYPE EGT MODULE
Our 8 Channel K-Type EGT Module (PN 30-2224, sold separately) allows racers and enthusiasts to install eight K-type thermocouple sensors onto their vehicle and transmit all 8 temp channels to a CD Carbon Digital Dash via a one-plug CAN bus connection.

LOGGING, TRACK MAPPING, SPEEDO and ODO CAPABILITIES
CD-7 Carbon dashes are available with a 200MB onboard logger (CD-7L/LG), which provides about 24 hours of logging time at up to 1,000 Hz/channel. It will accept as many channels as are available from either of the CAN bus inputs and we have tested it to accept up to 800 channels. Individual channel log speeds are adjustable.
The CD-7 Carbon and CD-7L Carbon are available with an internal GPS receiver and antenna (CD-7G & CD-7LG), which provides coordinates for creating track maps, viewing/recording lap times and split times, and seeing predictive lap times on the display with a live Gain/Loss value or for the use of a Speedometer and/or Odometer.
Racers looking for acceleration forces and vehicle dynamics channels in addition to GPS can purchase a Vehicle Dynamics Module (VDM, PN 30-2206, sold separately). The VDM includes a GPS receiver and antenna, a 3-axis gyroscope for viewing and recording roll, pitch and yaw, and a 3-axis accelerometer for collecting longitudinal, lateral and vertical acceleration.

UNLIMITED ALARMS AND WARNING TEXT

The CD-7 Carbon’s warning and alarm features put an end to obscure warning LEDs! DashDesign software features a powerful alarm editor to create warning alerts and alarms for any incoming channel using customizable text in almost any language. This allows you to see warnings and alarms with text values that you can program and eliminates having to guess the meaning behind a triggered warning LED or generic alarm like a check engine light.
We designed a dedicated alarm page that brings your attention to the dash in the event of a potentially catastrophic issue. The CD-7 Carbon triggers the alarm page whenever a user definable condition is met. This includes the status of the channel that triggered the alarm (for example, low oil pressure, low fuel pressure, high coolant temp, etc.), and if multiple alarm conditions are present, the CD-7 Carbon will scroll them on the screen in order of priority so you are aware of every critical alarm condition. This user-defined and user-prioritized scrollable feature is included for text warnings on the main pages as well.

SEVEN PAGES TOTAL, ALL CUSTOM CONFIGURABLE

The CD-7 Carbon Digital Displays are fully configurable and completely unlocked, so you will never pay for additional software features. They include seven total pages; a startup page, four main pages for viewing channels that can be toggled using the left button on the housing, a unique ‘On-Change’ page and a dedicated Alarm event page. All pages are 100% customizable; Use our layouts or create your own and put whatever channels you want wherever you want on the screen.

THREE EVENT TRIGGERED PAGES

Three event-based pages ensure that you do not miss any critical changes to the vehicle’s operating state. One is an alarm page. The CD-7 Carbon dash will display the alarm page whenever a user-definable condition is met. This page remains active until it is cleared by pressing the left button on the housing. The second event-based page is an On-Change page. The On-Change page is perfect for knowing what map you are on if you have map switching for different boost levels or traction control, and for viewing lap time, split time, etc., whenever you pass the start/stop beacon on the racetrack (beacon must be configured before racing). It is perfect for seeing user-defined momentary changes without having to add additional channels to your main pages.

The third event page is a Start-Up page that is triggered every time the dash powers up. You can program whatever splash screen graphics you want, such as team, company or sponsor logos and photos.

FREE DASHDESIGN GRAPHICS EDITOR SOFTWARE

Our DashDesign Screen Editing software is free and allows users to create and customize all of the different pages in the CD-7 Carbon dash. You can assign incoming channels to the supplied layouts or create your own from scratch, the only limit is your imagination! We provide multiple layouts and themes to accommodate most styles and types of racing. We add new layouts when we update the software, and make them available for download at no charge.

Taxes:

Singapore and Malaysia: All import taxes are included in our pricing.

USA: Taxes are included in this product pricing.

European Tva, Iva: Taxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.

Rest of the World: Other countries may have to pay their local import tax depending on your country's regulations.


Shipping:

This product will be shipped from our US Warehouse to any global location. Shipping via DHL/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.
Every Monday our team keeps you in the loop by sending out an "estimated time of arrival" email.
Please note that depending on car year, model and ECU used you may be required to use optional AEM Products:

OBD2 Car using CAN Language (Most European Cars after 2008): The dash will be plug and play.

OBD2 Car after 2008* using non CAN Language (Most Japanese Car): Please use AEM Electronics 30-2217, this OBDII Plug & Play Adapter Harness connects to OBDII port and sends available channels to CD-5/7 Dash.
*Please note that it will ONLY read information available within your engine datas.

OBD2 and Non OBD2 Car pre 2008* : You will need to use a CAN Sensor Module to collects analog information and translate them to CAN. Two modules are available:

30-2226
AEM’s 6 Channel CAN Sensor Module provides an affordable and easy way to add temperature, pressure, fuel level, and tachometer signals on to a CD Carbon Digital dash through AEMnet CAN bus! It’s perfect for users with carbureted vehicles who just need to see the basics, and for stock ECU and standalone ECU users who just need some additional inputs.

30-2212
AEM’s 22 Channel CAN Sensor Module (PN 30-2212) converts analog, digital and frequency inputs into an AEMnet CAN bus signal that can be transmitted to the CD-5 Carbon and CD-7 Digital Dashes. This expansion module provides a way for users with carbureted vehicles to add a CD Dash, and lets users with existing CAN-based devices add more channels to the display for viewing and/or data logging (data logging requires CD-5L Carbon or CD-7L logging Dashes). The 22-Channel CAN Sensor Module is compatible with the CD Dashes only; it will run in parallel with 3rd party CAN devices on the CD dashes but it is currently not compatible with AEM’s AQ-1 Data Logger, Series 2 or Infinity ECUs, or 3rd party ECUs or loggers.

For other Standalone ECU :

30-2213 – CD-7 Plug & Play Adapter Cable for MSD Atomic TBI
30-2214 – CD-7 Plug & Play Adapter Cable for Holley EFI
30-2215 – CD-7 Plug & Play Adapter Cable for Vi-Pec and Link ECUs
30-2216 – Polaris RZR Plug & Play Adapter Harness

Please contact us if you have any other questions.

People who bought this product, also bought