{"id":6258665062582,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Nissan Silvia PS13\/S13\/S14\/S15 (1988-2002)","handle":"recaro-japan-base-frame-seat-rail-standard-right-nissan-silvia-ps13-s13-s14-s15-1988-2002-2081-087-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position:15mm higher than OEM seat.(A case of Style-JJ)15mm to door from OEM seat.The length of slider is 35mm shorter than OEM seat on front side.There is interference between seat cushion side and center console on the front most position.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.For non-side airbag car only.,2WD.\u003cbr\u003e- IS-84 LX(Including JP ERGOMED series),LS,LT,old Orthopad,Style-J,JJ,JCfor back rest side and DoorArm Rest approximately1 20mm interfere. SR-1,2,3,4,5,Sport-J,JJ,JCDoorArm Rest approximately20〜25mm interfere.Racer,SP-# needs SP-G offset adapter (PN 1600094J\/RS\/TS-# series need RS\/TS-G offset adapter(PN 1700001J\/1700001J is adjustable offset (5mm\/10mm\/15mm). RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - Silvia - PS13 (1991-1993) SR20DE\u003cbr\u003eNissan - Silvia - PS13 (1991-1993) SR20DET\u003cbr\u003eNissan - Silvia - S13 (1988-1991) CA18DE\u003cbr\u003eNissan - Silvia - S13 (1988-1991) CA18DET\u003cbr\u003eNissan - Silvia - S14 (1996-1998) SR20DE\u003cbr\u003eNissan - Silvia - S14 (1993-1996) SR20DE\u003cbr\u003eNissan - Silvia - S14 (1996-1998) SR20DET\u003cbr\u003eNissan - Silvia - S14 (1993-1996) SR20DET\u003cbr\u003eNissan - Silvia - S15 (1999-2002) SR20DE\u003cbr\u003eNissan - Silvia - S15 (1999-2002) SR20DET\u003c!--split--\u003e","published_at":"2021-02-11T13:26:26+08:00","created_at":"2021-02-11T13:26:26+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","jp1","nissan","recaro-japan","right","seat-accessories","seat-rails","silvia-ps13-1991-1993-na-sr20de-i4","silvia-ps13-1991-1993-tc-sr20det-i4","silvia-s13-1988-1991-tc-ca18det-i4","silvia-s13-1988-1993-na-ca18de-i4","silvia-s14-kouki-1996-1998-na-sr20de-i4","silvia-s14-kouki-1996-1998-tc-sr20det-i4","silvia-s14-zenki-1993-1996-na-sr20de-i4","silvia-s14-zenki-1993-1996-tc-sr20det-i4","silvia-s15-1999-2002-na-sr20de-i4","silvia-s15-1999-2002-tc-sr20det-i4","ws16"],"price":22200,"price_min":22200,"price_max":22200,"available":true,"price_varies":false,"compare_at_price":22900,"compare_at_price_min":22900,"compare_at_price_max":22900,"compare_at_price_varies":false,"variants":[{"id":38026220732598,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2081.087.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Nissan Silvia PS13\/S13\/S14\/S15 (1988-2002)","public_title":null,"options":["Default Title"],"price":22200,"weight":17000,"compare_at_price":22900,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-nissan-silvia-ps13s13s14s15-1988-2002-rzcrew.jpg?v=1710329613"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-nissan-silvia-ps13s13s14s15-1988-2002-rzcrew.jpg?v=1710329613","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Nissan Silvia PS13\/S13\/S14\/S15 (1988-2002) - 2081.087.2 - Rzcrewgarage","id":25432805703862,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1365,"width":1365,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-nissan-silvia-ps13s13s14s15-1988-2002-rzcrew.jpg?v=1710329613"},"aspect_ratio":1.0,"height":1365,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-nissan-silvia-ps13s13s14s15-1988-2002-rzcrew.jpg?v=1710329613","width":1365}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position:15mm higher than OEM seat.(A case of Style-JJ)15mm to door from OEM seat.The length of slider is 35mm shorter than OEM seat on front side.There is interference between seat cushion side and center console on the front most position.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.For non-side airbag car only.,2WD.\u003cbr\u003e- IS-84 LX(Including JP ERGOMED series),LS,LT,old Orthopad,Style-J,JJ,JCfor back rest side and DoorArm Rest approximately1 20mm interfere. SR-1,2,3,4,5,Sport-J,JJ,JCDoorArm Rest approximately20〜25mm interfere.Racer,SP-# needs SP-G offset adapter (PN 1600094J\/RS\/TS-# series need RS\/TS-G offset adapter(PN 1700001J\/1700001J is adjustable offset (5mm\/10mm\/15mm). RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - Silvia - PS13 (1991-1993) SR20DE\u003cbr\u003eNissan - Silvia - PS13 (1991-1993) SR20DET\u003cbr\u003eNissan - Silvia - S13 (1988-1991) CA18DE\u003cbr\u003eNissan - Silvia - S13 (1988-1991) CA18DET\u003cbr\u003eNissan - Silvia - S14 (1996-1998) SR20DE\u003cbr\u003eNissan - Silvia - S14 (1993-1996) SR20DE\u003cbr\u003eNissan - Silvia - S14 (1996-1998) SR20DET\u003cbr\u003eNissan - Silvia - S14 (1993-1996) SR20DET\u003cbr\u003eNissan - Silvia - S15 (1999-2002) SR20DE\u003cbr\u003eNissan - Silvia - S15 (1999-2002) SR20DET\u003c!--split--\u003e"}

{"id":6675329253558,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Nissan Skyline GTR BNR34\/BCNR33\/BNR32 (1989-2002)","handle":"recaro-japan-base-frame-seat-rail-standard-right-nissan-skyline-gtr-bnr34-bcnr33-bnr32-1989-2002-2081-572-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eNew structure frame. One position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Cautionary note: It an only be attached to 4WD Cars ( 2wd\/4wd). Please refer to the seats listed in the matching information below. After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.LX (including ergomed type), LS, LT, New A-8, A-8 interfere with the seat cushion side by about 10 mm in front of the seat slide position. SR-1 and 2 have about 10mm interference between the shoulder and B pillar, about 10mm interference between the seat cushion side and the center console in front of the seat slide position, and about 5 to 15mm interference between the backrest side and the door armrest. SR-3, 4, 5, and New Ortho interfere with the seat cushion side and center console by about 10 mm, and the backrest side and door armrest by about 5 to 15 mm in front of the seat slide position. SP- # and racer require SP-G offset adapter set (6600 yen \u003cproduct number\u003e). Adjust the RMS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold RMS side adapter. Also, if there is interference with the interior, it can be alleviated by adjustment. Adjust the RCS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold RCS side adapter.\u003cbr\u003e- \u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003eLX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003eLS \/ LS-# \/ LT-#\u003cbr\u003eNew Orthopead (with RECARO Vent)\u003cbr\u003eRMS2600A \/ 2700G ( With side adapter)\u003cbr\u003eRCS ( with side adapter)\u003cbr\u003eSR-2 late model \/ SR-3 \/ SR-4 \/ SR-5 \/ SR-VF \/ SR-IMPACT \/ SR-IMPACT Pro\u003cbr\u003eRally Special \/ First SR \/ SR-2 Early Type\u003cbr\u003eSP-A \/ SP-G \/ SP-G2 \/ SP-G3 \/ SP-GT \/ SP-GT2 ( with side adapter)\u003cbr\u003eRACER SP-G \/ A\u003cbr\u003eAM19 TREND-JS\u003cbr\u003eAM19 STYLE-JS\u003cbr\u003eAM19 SPORT-JS\u003cbr\u003eTS-G \/ RS-G \/ TS-W \/ RS-W ( With Side adapter)\u003cbr\u003eSP-X\u003cbr\u003eSR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003eSportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - Skyline GTR - BNR34 (1999-2002) RB26DETT\u003cbr\u003eNissan - Skyline GTR - BCNR33 (1995-1998) RB26DETT\u003cbr\u003eNissan - Skyline GTR - BNR32 (1989-1994) RB26DETT\u003c!--split--\u003e\u003c\/product\u003e","published_at":"2021-04-26T14:20:48+08:00","created_at":"2021-04-26T14:20:49+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","jp1","nissan","recaro-japan","right","seat-rails","skyline-gt-r-bcnr33-chuki-1996-1997-tt-rb26dett-i6","skyline-gt-r-bcnr33-kouki-1997-1998-tt-rb26dett-i6","skyline-gt-r-bcnr33-zenki-1995-1996-tt-rb26dett-i6","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","skyline-gt-r-bnr34-kouki-2000-2002-tt-rb26dett-i6","skyline-gt-r-bnr34-zenki-1999-2000-tt-rb26dett-i6","ws16"],"price":20180,"price_min":20180,"price_max":20180,"available":true,"price_varies":false,"compare_at_price":20800,"compare_at_price_min":20800,"compare_at_price_max":20800,"compare_at_price_varies":false,"variants":[{"id":39638863806646,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2081.572.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Nissan Skyline GTR BNR34\/BCNR33\/BNR32 (1989-2002)","public_title":null,"options":["Default Title"],"price":20180,"weight":17000,"compare_at_price":20800,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-nissan-skyline-gtr-bnr34bcnr33bnr32-1989-2002-rzcrew.jpg?v=1710325430"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-nissan-skyline-gtr-bnr34bcnr33bnr32-1989-2002-rzcrew.jpg?v=1710325430","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Nissan Skyline GTR BNR34\/BCNR33\/BNR32 (1989-2002) - 2081.572.2 - Rzcrewgarage","id":25432814649526,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1365,"width":1365,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-nissan-skyline-gtr-bnr34bcnr33bnr32-1989-2002-rzcrew.jpg?v=1710325430"},"aspect_ratio":1.0,"height":1365,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-nissan-skyline-gtr-bnr34bcnr33bnr32-1989-2002-rzcrew.jpg?v=1710325430","width":1365}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eNew structure frame. One position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Cautionary note: It an only be attached to 4WD Cars ( 2wd\/4wd). Please refer to the seats listed in the matching information below. After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.LX (including ergomed type), LS, LT, New A-8, A-8 interfere with the seat cushion side by about 10 mm in front of the seat slide position. SR-1 and 2 have about 10mm interference between the shoulder and B pillar, about 10mm interference between the seat cushion side and the center console in front of the seat slide position, and about 5 to 15mm interference between the backrest side and the door armrest. SR-3, 4, 5, and New Ortho interfere with the seat cushion side and center console by about 10 mm, and the backrest side and door armrest by about 5 to 15 mm in front of the seat slide position. SP- # and racer require SP-G offset adapter set (6600 yen \u003cproduct number\u003e). Adjust the RMS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold RMS side adapter. Also, if there is interference with the interior, it can be alleviated by adjustment. Adjust the RCS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold RCS side adapter.\u003cbr\u003e- \u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003eLX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003eLS \/ LS-# \/ LT-#\u003cbr\u003eNew Orthopead (with RECARO Vent)\u003cbr\u003eRMS2600A \/ 2700G ( With side adapter)\u003cbr\u003eRCS ( with side adapter)\u003cbr\u003eSR-2 late model \/ SR-3 \/ SR-4 \/ SR-5 \/ SR-VF \/ SR-IMPACT \/ SR-IMPACT Pro\u003cbr\u003eRally Special \/ First SR \/ SR-2 Early Type\u003cbr\u003eSP-A \/ SP-G \/ SP-G2 \/ SP-G3 \/ SP-GT \/ SP-GT2 ( with side adapter)\u003cbr\u003eRACER SP-G \/ A\u003cbr\u003eAM19 TREND-JS\u003cbr\u003eAM19 STYLE-JS\u003cbr\u003eAM19 SPORT-JS\u003cbr\u003eTS-G \/ RS-G \/ TS-W \/ RS-W ( With Side adapter)\u003cbr\u003eSP-X\u003cbr\u003eSR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003eSportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - Skyline GTR - BNR34 (1999-2002) RB26DETT\u003cbr\u003eNissan - Skyline GTR - BCNR33 (1995-1998) RB26DETT\u003cbr\u003eNissan - Skyline GTR - BNR32 (1989-1994) RB26DETT\u003c!--split--\u003e\u003c\/product\u003e"}

{"id":6258664734902,"title":"Recaro Japan - Base Frame Seat Rail Ultra Low-Position Right - Nissan 180SX RPS13\/RS13 (1989-1998)","handle":"recaro-japan-base-frame-seat-rail-ultra-low-position-right-nissan-180sx-rps13-rs13-1989-1998-2081-015-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: Ultra Low-Position\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eTS-G \u003cbr\u003eRS-G \u003cbr\u003eTS-W \u003cbr\u003eRS-W\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - 180SX - RPS13 (1991-1993) SR20DE\u003cbr\u003eNissan - 180SX - RPS13 (1994-1996) SR20DE\u003cbr\u003eNissan - 180SX - RPS13 (1996-1998) SR20DE\u003cbr\u003eNissan - 180SX - RPS13 (1991-1993) SR20DET\u003cbr\u003eNissan - 180SX - RPS13 (1994-1996) SR20DET\u003cbr\u003eNissan - 180SX - RPS13 (1996-1998) SR20DET\u003cbr\u003eNissan - 180SX - RS13 (1989-1991) CA18DE\u003cbr\u003eNissan - 180SX - RS13 (1989-1991) CA18DET\u003c!--split--\u003e","published_at":"2021-02-11T13:26:16+08:00","created_at":"2021-02-11T13:26:17+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["180-sx-rps13-1989-1993-na-sr20de-i4","180-sx-rps13-1989-1993-tc-sr20det-i4","180-sx-rs13-1989-1993-na-ca18de-i4","180-sx-rs13-1989-1993-tc-ca18det-i4","180sx-rps13-1994-1996-na-sr20de-i4","180sx-rps13-1994-1996-tc-sr20det-i4","180sx-rps13-1996-1998-na-sr20de-i4","180sx-rps13-1996-1998-tc-sr20det-i4","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","jp1","nissan","recaro-japan","right","seat-rails","ws16"],"price":24400,"price_min":24400,"price_max":24400,"available":true,"price_varies":false,"compare_at_price":25200,"compare_at_price_min":25200,"compare_at_price_max":25200,"compare_at_price_varies":false,"variants":[{"id":38026220437686,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2081.015.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Ultra Low-Position Right - Nissan 180SX RPS13\/RS13 (1989-1998)","public_title":null,"options":["Default Title"],"price":24400,"weight":17000,"compare_at_price":25200,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-ultra-low-position-right-nissan-180sx-rps13rs13-1989-1998-rzcrew.jpg?v=1710329619"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-ultra-low-position-right-nissan-180sx-rps13rs13-1989-1998-rzcrew.jpg?v=1710329619","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Ultra Low-Position Right - Nissan 180SX RPS13\/RS13 (1989-1998) - 2081.015.2 - Rzcrewgarage","id":25432805277878,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1365,"width":1365,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-ultra-low-position-right-nissan-180sx-rps13rs13-1989-1998-rzcrew.jpg?v=1710329619"},"aspect_ratio":1.0,"height":1365,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-ultra-low-position-right-nissan-180sx-rps13rs13-1989-1998-rzcrew.jpg?v=1710329619","width":1365}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: Ultra Low-Position\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eTS-G \u003cbr\u003eRS-G \u003cbr\u003eTS-W \u003cbr\u003eRS-W\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - 180SX - RPS13 (1991-1993) SR20DE\u003cbr\u003eNissan - 180SX - RPS13 (1994-1996) SR20DE\u003cbr\u003eNissan - 180SX - RPS13 (1996-1998) SR20DE\u003cbr\u003eNissan - 180SX - RPS13 (1991-1993) SR20DET\u003cbr\u003eNissan - 180SX - RPS13 (1994-1996) SR20DET\u003cbr\u003eNissan - 180SX - RPS13 (1996-1998) SR20DET\u003cbr\u003eNissan - 180SX - RS13 (1989-1991) CA18DE\u003cbr\u003eNissan - 180SX - RS13 (1989-1991) CA18DET\u003c!--split--\u003e"}

{"id":6258664767670,"title":"Recaro Japan - Base Frame Seat Rail Ultra Low-Position Right - Nissan Silvia S13\/S14\/S15 (1988-2002)","handle":"recaro-japan-base-frame-seat-rail-ultra-low-position-right-nissan-silvia-s13-s14-s15-1988-2002-2081-015-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: Ultra Low-Position\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eTS-G \u003cbr\u003eRS-G \u003cbr\u003eTS-W \u003cbr\u003eRS-W\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - Silvia - S13 (1988-1991) CA18DE\u003cbr\u003eNissan - Silvia - S13 (1988-1991) CA18DET\u003cbr\u003eNissan - Silvia - S14 (1996-1998) SR20DE\u003cbr\u003eNissan - Silvia - S14 (1993-1996) SR20DE\u003cbr\u003eNissan - Silvia - S14 (1996-1998) SR20DET\u003cbr\u003eNissan - Silvia - S14 (1993-1996) SR20DET\u003cbr\u003eNissan - Silvia - S15 (1999-2002) SR20DE\u003cbr\u003eNissan - Silvia - S15 (1999-2002) SR20DET\u003c!--split--\u003e","published_at":"2021-02-11T13:26:18+08:00","created_at":"2021-02-11T13:26:18+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","jp1","nissan","recaro-japan","right","seat-rails","silvia-s13-1988-1991-tc-ca18det-i4","silvia-s13-1988-1993-na-ca18de-i4","silvia-s14-kouki-1996-1998-na-sr20de-i4","silvia-s14-kouki-1996-1998-tc-sr20det-i4","silvia-s14-zenki-1993-1996-na-sr20de-i4","silvia-s14-zenki-1993-1996-tc-sr20det-i4","silvia-s15-1999-2002-na-sr20de-i4","silvia-s15-1999-2002-tc-sr20det-i4","ws16"],"price":24400,"price_min":24400,"price_max":24400,"available":true,"price_varies":false,"compare_at_price":25200,"compare_at_price_min":25200,"compare_at_price_max":25200,"compare_at_price_varies":false,"variants":[{"id":38026220470454,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2081.015.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Ultra Low-Position Right - Nissan Silvia S13\/S14\/S15 (1988-2002)","public_title":null,"options":["Default Title"],"price":24400,"weight":17000,"compare_at_price":25200,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-ultra-low-position-right-nissan-silvia-s13s14s15-1988-2002-rzcrew.jpg?v=1710329619"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-ultra-low-position-right-nissan-silvia-s13s14s15-1988-2002-rzcrew.jpg?v=1710329619","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Ultra Low-Position Right - Nissan Silvia S13\/S14\/S15 (1988-2002) - 2081.015.2 - Rzcrewgarage","id":25432805310646,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1365,"width":1365,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-ultra-low-position-right-nissan-silvia-s13s14s15-1988-2002-rzcrew.jpg?v=1710329619"},"aspect_ratio":1.0,"height":1365,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-ultra-low-position-right-nissan-silvia-s13s14s15-1988-2002-rzcrew.jpg?v=1710329619","width":1365}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: Ultra Low-Position\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eTS-G \u003cbr\u003eRS-G \u003cbr\u003eTS-W \u003cbr\u003eRS-W\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - Silvia - S13 (1988-1991) CA18DE\u003cbr\u003eNissan - Silvia - S13 (1988-1991) CA18DET\u003cbr\u003eNissan - Silvia - S14 (1996-1998) SR20DE\u003cbr\u003eNissan - Silvia - S14 (1993-1996) SR20DE\u003cbr\u003eNissan - Silvia - S14 (1996-1998) SR20DET\u003cbr\u003eNissan - Silvia - S14 (1993-1996) SR20DET\u003cbr\u003eNissan - Silvia - S15 (1999-2002) SR20DE\u003cbr\u003eNissan - Silvia - S15 (1999-2002) SR20DET\u003c!--split--\u003e"}

{"id":7217142595766,"title":"Rize Japan - Titanium hood bar - Nissan - Skyline GT-R BNR32","handle":"rize-japan-titanium-hood-bar-nissan-skyline-gt-r-bnr32","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rize Japan\u003cbr\u003eReference Number: RZJPN-8\u003cbr\u003eType: titanium hood bar\u003cbr\u003eMaterial Options: \u003cbr\u003eApproximative Packaging Size: 10x10x10( volumetric Weight: 0.2) \u003cbr\u003e\u003cbr\u003ePerfectly Hand Crafted Titanium Hood Bar from Japan.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e","published_at":"2022-11-17T17:51:21+08:00","created_at":"2022-01-07T16:38:37+08:00","vendor":"Rize Japan","type":"Aero","tags":["1989","1990","1991","1992","1993","1994","aero","BNR32","bonnet","jp1","nissan","rize-japan","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","ws15"],"price":34420,"price_min":34420,"price_max":34420,"available":true,"price_varies":false,"compare_at_price":35300,"compare_at_price_min":35300,"compare_at_price_max":35300,"compare_at_price_varies":false,"variants":[{"id":41063915618486,"title":"Black","option1":"Black","option2":null,"option3":null,"sku":"RZJPN-8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rize Japan - Titanium hood bar - Nissan - Skyline GT-R BNR32 - Black","public_title":"Black","options":["Black"],"price":34420,"weight":1200,"compare_at_price":35300,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/rize-japan-titanium-hood-bar-nissan-skyline-gt-r-bnr32-rzcrew.jpg?v=1710321306"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rize-japan-titanium-hood-bar-nissan-skyline-gt-r-bnr32-rzcrew.jpg?v=1710321306","options":["Colour"],"media":[{"alt":"Rize Japan - Titanium hood bar - Nissan - Skyline GT-R BNR32 - RZJPN-8 - Rzcrew Garage","id":23334695141558,"position":1,"preview_image":{"aspect_ratio":1.5,"height":1280,"width":1920,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rize-japan-titanium-hood-bar-nissan-skyline-gt-r-bnr32-rzcrew.jpg?v=1710321306"},"aspect_ratio":1.5,"height":1280,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rize-japan-titanium-hood-bar-nissan-skyline-gt-r-bnr32-rzcrew.jpg?v=1710321306","width":1920}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rize Japan\u003cbr\u003eReference Number: RZJPN-8\u003cbr\u003eType: titanium hood bar\u003cbr\u003eMaterial Options: \u003cbr\u003eApproximative Packaging Size: 10x10x10( volumetric Weight: 0.2) \u003cbr\u003e\u003cbr\u003ePerfectly Hand Crafted Titanium Hood Bar from Japan.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e"}

{"id":4432489283681,"title":"Rzcrew Racing Billet Custom ITB Trumpet - Toyota 4AG-E 20V","handle":"rzcrew-racing-billet-custom-itb-trumpet-toyota-4ag-e-20v","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003eReference Number: RZT-4AGE-34mm-SS\u003cbr\u003eIntake Type: ITB Trumpet\u003cbr\u003eCustom diameter available on request. Cost may vary. Please contact us.\u003cbr\u003e\u003cbr\u003eOur Rzcrew Racing Individual Throttle bodies Trumpet are machined off 1 piece Billet construction for a perfect finish. This is a true custom product as you can choose the colour and the length of it.\u003cbr\u003eWhat is inside the Box:\u003cbr\u003e- 4 Billet Trumpets.\u003cbr\u003e-4 Thermo Teflon Gaskets.\u003cbr\u003e\u003cbr\u003ePlease let us know the inner diameter during checkout ( Silver Top 48mm, Black Top 45mm). \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e","published_at":"2019-12-15T10:37:59+08:00","created_at":"2019-12-15T10:38:01+08:00","vendor":"Rzcrew Racing","type":"Individual Throttle Bodies","tags":["0","1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","alfa-romeo","aston martin","audi","bmw","bmw-mini","chevrolet","citroen","daihatsu","ferrari","fiat","ford","honda","hyundai","individual-throttle-bodies","intake","kia","lexus","lotus","mazda","mercedes-benz","mitsubishi","nissan","opel","peugeot","porsche","renault","rzcrew-garage","rzcrew-racing","seat","sg1","skoda","subaru","suzuki","toyota","volkswagen","volvo","ws130"],"price":26280,"price_min":26280,"price_max":33210,"available":true,"price_varies":true,"compare_at_price":29200,"compare_at_price_min":29200,"compare_at_price_max":36900,"compare_at_price_varies":true,"variants":[{"id":31544323670113,"title":"34mm \/ Raw (Silver)","option1":"34mm","option2":"Raw (Silver)","option3":null,"sku":"RZT-4AGE-34mm-SS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Custom ITB Trumpet - Toyota 4AG-E 20V - 34mm \/ Raw (Silver)","public_title":"34mm \/ Raw (Silver)","options":["34mm","Raw (Silver)"],"price":26280,"weight":1000,"compare_at_price":29200,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31544323702881,"title":"34mm \/ Other Colour","option1":"34mm","option2":"Other Colour","option3":null,"sku":"RZT-4AGE-34mm-CS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Custom ITB Trumpet - Toyota 4AG-E 20V - 34mm \/ Other Colour","public_title":"34mm \/ Other Colour","options":["34mm","Other Colour"],"price":27810,"weight":1000,"compare_at_price":30900,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31544323735649,"title":"45mm \/ Raw (Silver)","option1":"45mm","option2":"Raw (Silver)","option3":null,"sku":"RZT-4AGE-45mm-SS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Custom ITB Trumpet - Toyota 4AG-E 20V - 45mm \/ Raw (Silver)","public_title":"45mm \/ Raw (Silver)","options":["45mm","Raw (Silver)"],"price":26280,"weight":1000,"compare_at_price":29200,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31544323768417,"title":"45mm \/ Other Colour","option1":"45mm","option2":"Other Colour","option3":null,"sku":"RZT-4AGE-45mm-CS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Custom ITB Trumpet - Toyota 4AG-E 20V - 45mm \/ Other Colour","public_title":"45mm \/ Other Colour","options":["45mm","Other Colour"],"price":27810,"weight":1000,"compare_at_price":30900,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31544323801185,"title":"55mm \/ Raw (Silver)","option1":"55mm","option2":"Raw (Silver)","option3":null,"sku":"RZT-4AGE-55mm-SS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Custom ITB Trumpet - Toyota 4AG-E 20V - 55mm \/ Raw (Silver)","public_title":"55mm \/ Raw (Silver)","options":["55mm","Raw (Silver)"],"price":26280,"weight":1000,"compare_at_price":29200,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31544323833953,"title":"55mm \/ Other Colour","option1":"55mm","option2":"Other Colour","option3":null,"sku":"RZT-4AGE-55mm-CS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Custom ITB Trumpet - Toyota 4AG-E 20V - 55mm \/ Other Colour","public_title":"55mm \/ Other Colour","options":["55mm","Other Colour"],"price":27810,"weight":1000,"compare_at_price":30900,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31544323866721,"title":"65mm \/ Raw (Silver)","option1":"65mm","option2":"Raw (Silver)","option3":null,"sku":"RZT-4AGE-65mm-SS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Custom ITB Trumpet - Toyota 4AG-E 20V - 65mm \/ Raw (Silver)","public_title":"65mm \/ Raw (Silver)","options":["65mm","Raw (Silver)"],"price":26280,"weight":1500,"compare_at_price":29200,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31544323899489,"title":"65mm \/ Other Colour","option1":"65mm","option2":"Other Colour","option3":null,"sku":"RZT-4AGE-65mm-CS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Custom ITB Trumpet - Toyota 4AG-E 20V - 65mm \/ Other Colour","public_title":"65mm \/ Other Colour","options":["65mm","Other Colour"],"price":27810,"weight":1500,"compare_at_price":30900,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31544323932257,"title":"75mm \/ Raw (Silver)","option1":"75mm","option2":"Raw (Silver)","option3":null,"sku":"RZT-4AGE-75mm-SS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Custom ITB Trumpet - Toyota 4AG-E 20V - 75mm \/ Raw (Silver)","public_title":"75mm \/ Raw (Silver)","options":["75mm","Raw (Silver)"],"price":30150,"weight":1500,"compare_at_price":33500,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31544323965025,"title":"75mm \/ Other Colour","option1":"75mm","option2":"Other Colour","option3":null,"sku":"RZT-4AGE-75mm-CS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Custom ITB Trumpet - Toyota 4AG-E 20V - 75mm \/ Other Colour","public_title":"75mm \/ Other Colour","options":["75mm","Other Colour"],"price":31680,"weight":1500,"compare_at_price":35200,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31544323997793,"title":"95mm \/ Raw (Silver)","option1":"95mm","option2":"Raw (Silver)","option3":null,"sku":"RZT-4AGE-95mm-SS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Custom ITB Trumpet - Toyota 4AG-E 20V - 95mm \/ Raw (Silver)","public_title":"95mm \/ Raw (Silver)","options":["95mm","Raw (Silver)"],"price":30150,"weight":1500,"compare_at_price":33500,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31544324030561,"title":"95mm \/ Other Colour","option1":"95mm","option2":"Other Colour","option3":null,"sku":"RZT-4AGE-95mm-CS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Custom ITB Trumpet - Toyota 4AG-E 20V - 95mm \/ Other Colour","public_title":"95mm \/ Other Colour","options":["95mm","Other Colour"],"price":31680,"weight":2000,"compare_at_price":35200,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31544324063329,"title":"105mm \/ Raw (Silver)","option1":"105mm","option2":"Raw (Silver)","option3":null,"sku":"RZT-4AGE-105mm-SS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Custom ITB Trumpet - Toyota 4AG-E 20V - 105mm \/ Raw (Silver)","public_title":"105mm \/ Raw (Silver)","options":["105mm","Raw (Silver)"],"price":30150,"weight":2000,"compare_at_price":33500,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31544324096097,"title":"105mm \/ Other Colour","option1":"105mm","option2":"Other Colour","option3":null,"sku":"RZT-4AGE-105mm-CS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Custom ITB Trumpet - Toyota 4AG-E 20V - 105mm \/ Other Colour","public_title":"105mm \/ Other Colour","options":["105mm","Other Colour"],"price":31680,"weight":2000,"compare_at_price":35200,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31544324128865,"title":"Custom Size (Below 100mm) \/ Raw (Silver)","option1":"Custom Size (Below 100mm)","option2":"Raw (Silver)","option3":null,"sku":"RZT-4AGE-CS-SS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Custom ITB Trumpet - Toyota 4AG-E 20V - Custom Size (Below 100mm) \/ Raw (Silver)","public_title":"Custom Size (Below 100mm) \/ Raw (Silver)","options":["Custom Size (Below 100mm)","Raw (Silver)"],"price":31590,"weight":2000,"compare_at_price":35100,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31544324161633,"title":"Custom Size (Below 100mm) \/ Other Colour","option1":"Custom Size (Below 100mm)","option2":"Other Colour","option3":null,"sku":"RZT-4AGE-CS-CS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Custom ITB Trumpet - Toyota 4AG-E 20V - Custom Size (Below 100mm) \/ Other Colour","public_title":"Custom Size (Below 100mm) \/ Other Colour","options":["Custom Size (Below 100mm)","Other Colour"],"price":33210,"weight":2000,"compare_at_price":36900,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31544324194401,"title":"Custom Size (Higher than 100mm) \/ Raw (Silver)","option1":"Custom Size (Higher than 100mm)","option2":"Raw (Silver)","option3":null,"sku":"RZT-4AGE-CSH-SS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Custom ITB Trumpet - Toyota 4AG-E 20V - Custom Size (Higher than 100mm) \/ Raw (Silver)","public_title":"Custom Size (Higher than 100mm) \/ Raw (Silver)","options":["Custom Size (Higher than 100mm)","Raw (Silver)"],"price":31590,"weight":2000,"compare_at_price":35100,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31544324227169,"title":"Custom Size (Higher than 100mm) \/ Other Colour","option1":"Custom Size (Higher than 100mm)","option2":"Other Colour","option3":null,"sku":"RZT-4AGE-CSH-CS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Custom ITB Trumpet - Toyota 4AG-E 20V - Custom Size (Higher than 100mm) \/ Other Colour","public_title":"Custom Size (Higher than 100mm) \/ Other Colour","options":["Custom Size (Higher than 100mm)","Other Colour"],"price":33210,"weight":2000,"compare_at_price":36900,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/trumpet_whatsapp_64fee6e2-151b-46e2-8812-3c16db8a6417.jpg?v=1710190400","\/\/rzcrewgarage.com\/cdn\/shop\/products\/Anodisation_af717e53-78bd-4d82-bc38-31bd661a5d91.jpg?v=1710190403"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/trumpet_whatsapp_64fee6e2-151b-46e2-8812-3c16db8a6417.jpg?v=1710190400","options":["Trumpet Length:","Trumpet Colour:"],"media":[{"alt":"Rzcrew Racing Billet Custom ITB Trumpet - Toyota 4AG-E 20V","id":26413992247478,"position":1,"preview_image":{"aspect_ratio":1.561,"height":788,"width":1230,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/trumpet_whatsapp_64fee6e2-151b-46e2-8812-3c16db8a6417.jpg?v=1710190400"},"aspect_ratio":1.561,"height":788,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/trumpet_whatsapp_64fee6e2-151b-46e2-8812-3c16db8a6417.jpg?v=1710190400","width":1230},{"alt":"Rzcrew Racing Billet Custom ITB Trumpet - Toyota 4AG-E 20V - [variant sku] - RZCrewGarage","id":26413992280246,"position":2,"preview_image":{"aspect_ratio":1.0,"height":927,"width":927,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Anodisation_af717e53-78bd-4d82-bc38-31bd661a5d91.jpg?v=1710190403"},"aspect_ratio":1.0,"height":927,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Anodisation_af717e53-78bd-4d82-bc38-31bd661a5d91.jpg?v=1710190403","width":927}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003eReference Number: RZT-4AGE-34mm-SS\u003cbr\u003eIntake Type: ITB Trumpet\u003cbr\u003eCustom diameter available on request. Cost may vary. Please contact us.\u003cbr\u003e\u003cbr\u003eOur Rzcrew Racing Individual Throttle bodies Trumpet are machined off 1 piece Billet construction for a perfect finish. This is a true custom product as you can choose the colour and the length of it.\u003cbr\u003eWhat is inside the Box:\u003cbr\u003e- 4 Billet Trumpets.\u003cbr\u003e-4 Thermo Teflon Gaskets.\u003cbr\u003e\u003cbr\u003ePlease let us know the inner diameter during checkout ( Silver Top 48mm, Black Top 45mm). \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e"}

{"id":1945279365217,"title":"Rzcrew Racing Billet Individual Throttle Bodies kit - Nissan - Primera HP10","handle":"rzcrew-garage-billet-individual-throttle-bodies-kit-nissan-primera-hp10","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003eReference Number: BITB-N-P10-34mm-SS\u003cbr\u003eIntake Type: ITB Kit\u003cbr\u003ePlease choose Throttle diameter during check out:\u003cbr\u003e45mm\u003cbr\u003e48mm\u003cbr\u003e50mm\u003cbr\u003e52mm\u003cbr\u003e55mm\u003cbr\u003eWe have now added the option to choose no trumpet and purchase Our Titanium Velocity stack for your kit. Please refer to this link: \u003ca href=\"url\"\u003ehttps:\/\/rzcrewgarage.com\/products\/rzcrew-racing-titanium-velocity-stack-set-trumpet-for-rzcrew-racing-indiviual-throttle-body-itb\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003eCustom diameter available on request. Cost may vary. Please contact us.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecial Note about ITB on this particular car model:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eMaximum Recommended Trumpet Length: 75mmThis is the third version of our Individual Throttle Body design, introducing a fully customisable linkage system for perfect idle tuning.\u003cbr\u003e\u003cbr\u003eThe New ITB V3 feature:\u003cbr\u003e\u003cbr\u003e*New multidirectional linkage assembly uses Japanese-made bearings for a smooth throttle response. The new linkage system allows for individual adjustment of each throttle plate individually for the precise idle fine tuning.\u003cbr\u003e*The introduction of a new CNC Machined Titanium shaft avoids any distortion due to wear and tear and keeps the assembly light for a great pedal feel.\u003cbr\u003e*Each throttle body flap is now individually customised to each throttle body for perfect fitment, preventing any leak.\u003cbr\u003e*This new system also allows us to machine 55mm throttle body opening for the most hardcore setups.\u003cbr\u003e\n*Billet Individual throttle body adapter, also called Runner, are calculated to make the installation easy and keep the ITB Mechanism closed to the head to ensure perfect flow and less turbulence. The shorter flow's travel also enhances engine response and Torque.\u003cbr\u003e*The HP10 kits feature a Runner adapter made for EV14 Top Feed injectors ( K series Injectors). Coming with a complementary fuel rail, opens more opportunities to change Injector flow to match your setup as well as a better flow pattern switching from Side Feed to top Feed.\u003cbr\u003e\n* Billet ITB system. Our ITB are machined in one piece of billet aluminum on high precision CNC Machine to ensure perfect fitting and flow. Fully mounted on ball bearing to get a smooth pedal feel and perfect air delivery in each cylinder. Each Throttle plate are manufactured in copper to avoid any sticky feeling under high heat. Throttle Diameters may Vary depending on engine model, we usually propose 3 different diameters yet you can contact us for any design. The Throttle body diameter are listed on the specs so let us know during time of ordering.\u003cbr\u003eAnodisation are also available on request for the ITB Body. If you want to make your engine bay shines, we propose 8 different colours to match your style! Please check the picture and let us know during checkout. ( default colour is silver)\u003cbr\u003eEach Throttle plates are commanded by a single mechanism making the hidling tuning of each cylinder a breeze and avoiding chaotic hidling.\n* Teflon gaskets are included between the runner and the itb as well as the trumpet to ensure low heat conductivity.\u003cbr\u003e\n* Custom lenght Trumpet. It is important to choose the right trumpet lenght depending on your application. For higher peak power we recommend shorter Trumpet lenght. For Torque, we recommend longer lenght. You can choose the appropriate lenght in our option menu on the right. Certain engine responses are different so feel free to enquire, we will ba glad to help you.\u003cbr\u003e\u003cbr\u003e* Vaccum Box is included, get all your vaccum set at once and link it to your brake booster and other encilliaries. It also includes all billet fitting with different diameter to get it linked to your vaccum circuit promptly. Please note that vaccum hoses are not included in this kit.\u003cbr\u003e\u003cbr\u003eRzcrew Garage ITB are modular. They follow the same bolt pattern as our Airstream Billet Manifold, with that in mind you can easily upgrade your Airstream billet Manifold to ITB or purchase the intake manifold box separetly if you wish to run an air filter on your ITB setup.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSee them in Action:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIn December 2019, we flew to France to meet our good friends at CRTUNE, the mission was simple: Dyno and test our prototype. Their K20A Eg6 is already quite a beast but well power is never enough. Their setup is the following:\u003cbr\u003e*DC5 K20A\u003cbr\u003eStock Compression Ratio\u003cbr\u003eDrag cartel 2.2 Camshafts\u003cbr\u003eDry Sump setup\u003cbr\u003eExhaust header and catback 2.5\"\u003cbr\u003eAdding our Itb to the mix made 278HP and 267Nm Torque. Video and pictures Below!\u003cbr\u003e\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/uMa-hxTbHPE\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\" width=\"750\" height=\"422\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003cbr\u003eImportant Note:\u003cbr\u003e\nOur system follows the stock Throttle position sensor for ease of installation, please note that you will need a standalone ECU for starting you car and tuning it properly.We highly recommend a professional tuner to do the job and install them.\u003cbr\u003eFitting ITBs required higher compressions as well as up-rated camshafts to ensure a proper Horse power and Torque Gain, Fitting it on a stock engine is do-able yet not the best to maximise your setup.\u003cbr\u003eAll our Individual Throttle bodies are actionned by cable and you may be required to convert your pedal and mechanism if using EThrottle. Modification on your accelerator cable may be needed in certain case.\u003cbr\u003e\u003cbr\u003e It may not be available for your car but feel free to ask, we will be glad to customize something for you.\u003cbr\u003e\u003cbr\u003e Please note that this product is made on order and take a minimum of 1 month production time!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003c\/p\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003ePrimera | HP10 | 1989-1992 | NA | SR20DE | I4\u003cbr\u003ePrimera | HP10 | 1992-1994 | NA | SR20DE | I4\u003cbr\u003ePrimera | HP10 | 1994-1995 | NA | SR20DE | I4\u003c!--split--\u003e","published_at":"2019-01-28T13:59:19+08:00","created_at":"2019-01-28T13:59:27+08:00","vendor":"Rzcrew Racing","type":"Individual Throttle Bodies","tags":["1989","1990","1991","1992","1993","1994","1995","individual-throttle-bodies","intake","nissan","primera-hp10-1989-1992-na-sr20de-i4","primera-hp10-1992-1994-na-sr20de-i4","primera-hp10-1994-1995-na-sr20de-i4","rzcrew-garage","rzcrew-racing","sg1","ws135"],"price":169830,"price_min":169830,"price_max":199800,"available":true,"price_varies":true,"compare_at_price":188700,"compare_at_price_min":188700,"compare_at_price_max":222000,"compare_at_price_varies":true,"variants":[{"id":18480695804001,"title":"34mm \/ Raw (Silver) \/ Raw (Silver)","option1":"34mm","option2":"Raw (Silver)","option3":"Raw (Silver)","sku":"BITB-N-P10-34mm-SS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Nissan - Primera HP10 - 34mm \/ Raw (Silver) \/ Raw (Silver)","public_title":"34mm \/ Raw (Silver) \/ Raw (Silver)","options":["34mm","Raw (Silver)","Raw (Silver)"],"price":184500,"weight":13000,"compare_at_price":205000,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480695836769,"title":"34mm \/ Raw (Silver) \/ Other Colour","option1":"34mm","option2":"Raw (Silver)","option3":"Other Colour","sku":"BITB-N-P10-34mm-SC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Nissan - Primera HP10 - 34mm \/ Raw (Silver) \/ Other Colour","public_title":"34mm \/ Raw (Silver) \/ Other Colour","options":["34mm","Raw (Silver)","Other Colour"],"price":190800,"weight":13000,"compare_at_price":212000,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480695869537,"title":"34mm \/ Other Colour \/ Raw (Silver)","option1":"34mm","option2":"Other Colour","option3":"Raw (Silver)","sku":"BITB-N-P10-34mm-CS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Nissan - Primera HP10 - 34mm \/ Other Colour \/ Raw (Silver)","public_title":"34mm \/ Other Colour \/ Raw (Silver)","options":["34mm","Other Colour","Raw (Silver)"],"price":190800,"weight":13000,"compare_at_price":212000,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480695902305,"title":"34mm \/ Other Colour \/ Other Colour","option1":"34mm","option2":"Other Colour","option3":"Other Colour","sku":"BITB-N-P10-34mm-CC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Nissan - Primera HP10 - 34mm \/ Other Colour \/ Other Colour","public_title":"34mm \/ Other Colour \/ Other Colour","options":["34mm","Other Colour","Other Colour"],"price":197190,"weight":13000,"compare_at_price":219100,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480695935073,"title":"45mm \/ Raw (Silver) \/ Raw (Silver)","option1":"45mm","option2":"Raw (Silver)","option3":"Raw (Silver)","sku":"BITB-N-P10-45mm-SS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Nissan - Primera HP10 - 45mm \/ Raw (Silver) \/ Raw (Silver)","public_title":"45mm \/ Raw (Silver) \/ Raw (Silver)","options":["45mm","Raw (Silver)","Raw (Silver)"],"price":184500,"weight":13000,"compare_at_price":205000,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480695967841,"title":"45mm \/ Raw (Silver) \/ Other Colour","option1":"45mm","option2":"Raw (Silver)","option3":"Other Colour","sku":"BITB-N-P10-45mm-SC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Nissan - Primera HP10 - 45mm \/ Raw (Silver) \/ Other Colour","public_title":"45mm \/ Raw (Silver) \/ Other Colour","options":["45mm","Raw (Silver)","Other Colour"],"price":190800,"weight":13000,"compare_at_price":212000,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480696000609,"title":"45mm \/ Other Colour \/ Raw (Silver)","option1":"45mm","option2":"Other Colour","option3":"Raw (Silver)","sku":"BITB-N-P10-45mm-CS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Nissan - Primera HP10 - 45mm \/ Other Colour \/ Raw (Silver)","public_title":"45mm \/ Other Colour \/ Raw (Silver)","options":["45mm","Other Colour","Raw (Silver)"],"price":190800,"weight":13000,"compare_at_price":212000,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480696033377,"title":"45mm \/ Other Colour \/ Other Colour","option1":"45mm","option2":"Other Colour","option3":"Other Colour","sku":"BITB-N-P10-45mm-CC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Nissan - Primera HP10 - 45mm \/ Other Colour \/ Other Colour","public_title":"45mm \/ Other Colour \/ Other Colour","options":["45mm","Other Colour","Other Colour"],"price":197190,"weight":13000,"compare_at_price":219100,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480696066145,"title":"55mm \/ Raw (Silver) \/ Raw (Silver)","option1":"55mm","option2":"Raw (Silver)","option3":"Raw (Silver)","sku":"BITB-N-P10-55mm-SS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Nissan - Primera HP10 - 55mm \/ Raw (Silver) \/ Raw (Silver)","public_title":"55mm \/ Raw (Silver) \/ Raw (Silver)","options":["55mm","Raw (Silver)","Raw (Silver)"],"price":184500,"weight":13000,"compare_at_price":205000,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480696098913,"title":"55mm \/ Raw (Silver) \/ Other Colour","option1":"55mm","option2":"Raw (Silver)","option3":"Other Colour","sku":"BITB-N-P10-55mm-SC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Nissan - Primera HP10 - 55mm \/ Raw (Silver) \/ Other Colour","public_title":"55mm \/ Raw (Silver) \/ Other Colour","options":["55mm","Raw (Silver)","Other Colour"],"price":190800,"weight":13000,"compare_at_price":212000,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480696131681,"title":"55mm \/ Other Colour \/ Raw (Silver)","option1":"55mm","option2":"Other Colour","option3":"Raw (Silver)","sku":"BITB-N-P10-55mm-CS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Nissan - Primera HP10 - 55mm \/ Other Colour \/ Raw (Silver)","public_title":"55mm \/ Other Colour \/ Raw (Silver)","options":["55mm","Other Colour","Raw (Silver)"],"price":190800,"weight":13000,"compare_at_price":212000,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480696164449,"title":"55mm \/ Other Colour \/ Other Colour","option1":"55mm","option2":"Other Colour","option3":"Other Colour","sku":"BITB-N-P10-55mm-CC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Nissan - Primera HP10 - 55mm \/ Other Colour \/ Other Colour","public_title":"55mm \/ Other Colour \/ Other Colour","options":["55mm","Other Colour","Other Colour"],"price":197190,"weight":13000,"compare_at_price":219100,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480696197217,"title":"65mm \/ Raw (Silver) \/ Raw (Silver)","option1":"65mm","option2":"Raw (Silver)","option3":"Raw (Silver)","sku":"BITB-N-P10-65mm-SS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Nissan - Primera HP10 - 65mm \/ Raw (Silver) \/ Raw (Silver)","public_title":"65mm \/ Raw (Silver) \/ Raw (Silver)","options":["65mm","Raw (Silver)","Raw (Silver)"],"price":184500,"weight":13000,"compare_at_price":205000,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480696229985,"title":"65mm \/ Raw (Silver) \/ Other Colour","option1":"65mm","option2":"Raw (Silver)","option3":"Other Colour","sku":"BITB-N-P10-65mm-SC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Nissan - Primera HP10 - 65mm \/ Raw (Silver) \/ Other Colour","public_title":"65mm \/ Raw (Silver) \/ Other Colour","options":["65mm","Raw (Silver)","Other Colour"],"price":190800,"weight":13000,"compare_at_price":212000,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480696262753,"title":"65mm \/ Other Colour \/ Raw (Silver)","option1":"65mm","option2":"Other Colour","option3":"Raw (Silver)","sku":"BITB-N-P10-65mm-CS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Nissan - Primera HP10 - 65mm \/ Other Colour \/ Raw (Silver)","public_title":"65mm \/ Other Colour \/ Raw (Silver)","options":["65mm","Other Colour","Raw (Silver)"],"price":190800,"weight":13000,"compare_at_price":212000,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480696295521,"title":"65mm \/ Other Colour \/ Other Colour","option1":"65mm","option2":"Other Colour","option3":"Other Colour","sku":"BITB-N-P10-65mm-CC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Nissan - Primera HP10 - 65mm \/ Other Colour \/ Other Colour","public_title":"65mm \/ Other Colour \/ Other Colour","options":["65mm","Other Colour","Other Colour"],"price":197190,"weight":13000,"compare_at_price":219100,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480696328289,"title":"75mm \/ Raw (Silver) \/ Raw (Silver)","option1":"75mm","option2":"Raw (Silver)","option3":"Raw (Silver)","sku":"BITB-N-P10-75mm-SS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Nissan - Primera HP10 - 75mm \/ Raw (Silver) \/ Raw (Silver)","public_title":"75mm \/ Raw (Silver) \/ Raw (Silver)","options":["75mm","Raw (Silver)","Raw (Silver)"],"price":184500,"weight":13000,"compare_at_price":205000,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480696361057,"title":"75mm \/ Raw (Silver) \/ Other Colour","option1":"75mm","option2":"Raw (Silver)","option3":"Other Colour","sku":"BITB-N-P10-75mm-SC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Nissan - Primera HP10 - 75mm \/ Raw (Silver) \/ Other Colour","public_title":"75mm \/ Raw (Silver) \/ Other Colour","options":["75mm","Raw (Silver)","Other Colour"],"price":190800,"weight":13000,"compare_at_price":212000,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480696393825,"title":"75mm \/ Other Colour \/ Raw (Silver)","option1":"75mm","option2":"Other Colour","option3":"Raw (Silver)","sku":"BITB-N-P10-75mm-CS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Nissan - Primera HP10 - 75mm \/ Other Colour \/ Raw (Silver)","public_title":"75mm \/ Other Colour \/ Raw (Silver)","options":["75mm","Other Colour","Raw (Silver)"],"price":190800,"weight":13000,"compare_at_price":212000,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480696426593,"title":"75mm \/ Other Colour \/ Other Colour","option1":"75mm","option2":"Other Colour","option3":"Other Colour","sku":"BITB-N-P10-75mm-CC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Nissan - Primera HP10 - 75mm \/ Other Colour \/ Other Colour","public_title":"75mm \/ Other Colour \/ Other Colour","options":["75mm","Other Colour","Other Colour"],"price":197190,"weight":13000,"compare_at_price":219100,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480696459361,"title":"95mm \/ Raw (Silver) \/ Raw (Silver)","option1":"95mm","option2":"Raw (Silver)","option3":"Raw (Silver)","sku":"BITB-N-P10-95mm-SS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Nissan - Primera HP10 - 95mm \/ Raw (Silver) \/ Raw (Silver)","public_title":"95mm \/ Raw (Silver) \/ Raw (Silver)","options":["95mm","Raw (Silver)","Raw (Silver)"],"price":187110,"weight":13000,"compare_at_price":207900,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480696492129,"title":"95mm \/ Raw (Silver) \/ Other Colour","option1":"95mm","option2":"Raw (Silver)","option3":"Other Colour","sku":"BITB-N-P10-95mm-SC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Nissan - Primera HP10 - 95mm \/ Raw (Silver) \/ Other Colour","public_title":"95mm \/ Raw (Silver) \/ Other Colour","options":["95mm","Raw (Silver)","Other Colour"],"price":193500,"weight":13000,"compare_at_price":215000,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480696524897,"title":"95mm \/ Other Colour \/ Raw (Silver)","option1":"95mm","option2":"Other Colour","option3":"Raw (Silver)","sku":"BITB-N-P10-95mm-CS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Nissan - Primera HP10 - 95mm \/ Other Colour \/ Raw (Silver)","public_title":"95mm \/ Other Colour \/ Raw (Silver)","options":["95mm","Other Colour","Raw (Silver)"],"price":193500,"weight":13000,"compare_at_price":215000,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480696557665,"title":"95mm \/ Other Colour \/ Other Colour","option1":"95mm","option2":"Other Colour","option3":"Other Colour","sku":"BITB-N-P10-95mm-CC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Nissan - Primera HP10 - 95mm \/ Other Colour \/ Other Colour","public_title":"95mm \/ Other Colour \/ Other Colour","options":["95mm","Other Colour","Other Colour"],"price":199800,"weight":13000,"compare_at_price":222000,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480696590433,"title":"105mm \/ Raw (Silver) \/ Raw (Silver)","option1":"105mm","option2":"Raw (Silver)","option3":"Raw (Silver)","sku":"BITB-N-P10-105mm-SS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Nissan - Primera HP10 - 105mm \/ Raw (Silver) \/ Raw (Silver)","public_title":"105mm \/ Raw (Silver) \/ Raw (Silver)","options":["105mm","Raw (Silver)","Raw (Silver)"],"price":187110,"weight":13000,"compare_at_price":207900,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480696623201,"title":"105mm \/ Raw (Silver) \/ Other Colour","option1":"105mm","option2":"Raw (Silver)","option3":"Other Colour","sku":"BITB-N-P10-105mm-SC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Nissan - Primera HP10 - 105mm \/ Raw (Silver) \/ Other Colour","public_title":"105mm \/ Raw (Silver) \/ Other Colour","options":["105mm","Raw (Silver)","Other Colour"],"price":193500,"weight":13000,"compare_at_price":215000,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480696655969,"title":"105mm \/ Other Colour \/ Raw (Silver)","option1":"105mm","option2":"Other Colour","option3":"Raw (Silver)","sku":"BITB-N-P10-105mm-CS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Nissan - Primera HP10 - 105mm \/ Other Colour \/ Raw (Silver)","public_title":"105mm \/ Other Colour \/ Raw (Silver)","options":["105mm","Other Colour","Raw (Silver)"],"price":193500,"weight":13000,"compare_at_price":215000,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480696688737,"title":"105mm \/ Other Colour \/ Other Colour","option1":"105mm","option2":"Other Colour","option3":"Other Colour","sku":"BITB-N-P10-105mm-CC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Nissan - Primera HP10 - 105mm \/ Other Colour \/ Other Colour","public_title":"105mm \/ Other Colour \/ Other Colour","options":["105mm","Other Colour","Other Colour"],"price":199800,"weight":13000,"compare_at_price":222000,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42201067880630,"title":"No Trumpet \/ Raw (Silver) \/ N\/A","option1":"No Trumpet","option2":"Raw (Silver)","option3":"N\/A","sku":"BITB-N-P10-No Trumpet-SS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Nissan - Primera HP10 - No Trumpet \/ Raw (Silver) \/ N\/A","public_title":"No Trumpet \/ Raw (Silver) \/ N\/A","options":["No Trumpet","Raw (Silver)","N\/A"],"price":169830,"weight":11000,"compare_at_price":188700,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42201067913398,"title":"No Trumpet \/ Other Colour \/ N\/A","option1":"No Trumpet","option2":"Other Colour","option3":"N\/A","sku":"BITB-N-P10-No Trumpet-CS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Nissan - Primera HP10 - No Trumpet \/ Other Colour \/ N\/A","public_title":"No Trumpet \/ Other Colour \/ N\/A","options":["No Trumpet","Other Colour","N\/A"],"price":175950,"weight":11000,"compare_at_price":195500,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/ITB02_ed6e6355-aba2-4c32-877a-567b038a292e.jpg?v=1710169101","\/\/rzcrewgarage.com\/cdn\/shop\/products\/ITB07_bc888d1a-8421-4dbc-8789-f32afb65fb15.jpg?v=1710169105","\/\/rzcrewgarage.com\/cdn\/shop\/products\/ITB01_48f06b2d-3e5f-4e53-8b85-e180795c7904.jpg?v=1710169110","\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Racing_Individual_Throttle_Body_67fac8d6-4ffd-4e1e-94d0-d5159a8f330e.jpg?v=1710169113","\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Racing_Individual_Throttle_Body_2_b566448a-02ea-44d7-8ee7-58efb9ff0c88.jpg?v=1710169116","\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_ITB_Runner_4age_ed12b8d0-e192-46c0-b507-bc7eca7532f3.jpg?v=1710169117","\/\/rzcrewgarage.com\/cdn\/shop\/products\/RZ-VM-SC_e4bce7a5-4c4c-4807-b031-7cd3c0155913.jpg?v=1710169119","\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2018-12-15_at_12.27.49_e455f930-3c44-4acb-8bea-3add7a8bb2b5.jpg?v=1710169121","\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.23_1_af4dad5e-edc7-4f9b-b27e-7f3b414e8ce3.jpg?v=1710169124","\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.24_1de4aa4a-3df0-44e4-9433-7060e1275cf9.jpg?v=1710169126","\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2018-12-15_at_12.27.49_0a659144-94c8-4821-9f5a-f87ee3f4041a.jpg?v=1710169128","\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.23_1_97f97bc1-1229-4524-a665-88ac1b5b0836.jpg?v=1710169130","\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.24_54ac8ac2-db29-4984-a32d-00319939cc5f.jpg?v=1710169132","\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.23_d805ca81-b0f7-4ffb-b157-375a07d3b5aa.jpg?v=1710169133","\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.22_1_05a81b87-a6de-4f3d-a980-16b7b0e017d2.jpg?v=1710169135","\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Itb_mechanism_9bb1e0d1-ee2d-46df-b969-ab67553bbdb2.jpg?v=1710169137","\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrewgarage_itb_mechanism2_dcae6103-b5c1-4b0b-b6f3-6ed5f025beb9.jpg?v=1710169138","\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrewgarage_Itb_Runner_049911d4-3fb5-4be2-a149-b73ba1d1eaf4.jpg?v=1710169141","\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrewgarage_ITB_Gasket_af532431-c4f5-4985-bbe5-c2bcad849608.jpg?v=1710169142","\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrewgarage_Itb_Trumpet_d4787f32-a6f2-4cbe-a2d4-b9938ec2d58d.jpg?v=1710169144","\/\/rzcrewgarage.com\/cdn\/shop\/products\/Anodisation_c058cec4-0545-4b0d-9f5a-0d18337f2f2d.jpg?v=1710169146","\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.21_b0f83088-8bcc-4270-a50c-c5c392b6837a.jpg?v=1710169147","\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.20_08319e65-a701-4f02-90b3-c14ac0d354af.jpg?v=1710169149","\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.20_1_3889d705-aa02-4678-9ed2-b2880730260a.jpg?v=1710169151","\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.20_2_94f35829-1978-491c-8db8-91daab6f1791.jpg?v=1710169153","\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2023-04-13_at_17.20.55_1d517edd-615c-4171-884e-3c80af652e19.jpg?v=1710169155","\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2023-04-13_at_17.20.55_dd84569b-9a95-4d56-9f1e-8fe880b749aa.jpg?v=1710169157","\/\/rzcrewgarage.com\/cdn\/shop\/products\/Anodisation-Colours_754f66bb-0f46-4faf-9428-bb24888e4782.jpg?v=1710169159"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/ITB02_ed6e6355-aba2-4c32-877a-567b038a292e.jpg?v=1710169101","options":["Trumpet Length:","ITB Body Colour:","Trumpet Colour:"],"media":[{"alt":"Rzcrew Garage Billet Individual Throttle Bodies kit - Nissan - Primera HP10","id":26122234822838,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2048,"width":2048,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/ITB02_ed6e6355-aba2-4c32-877a-567b038a292e.jpg?v=1710169101"},"aspect_ratio":1.0,"height":2048,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/ITB02_ed6e6355-aba2-4c32-877a-567b038a292e.jpg?v=1710169101","width":2048},{"alt":"Rzcrew Garage Billet Individual Throttle Bodies kit - Nissan - Primera HP10","id":26122234855606,"position":2,"preview_image":{"aspect_ratio":1.0,"height":2048,"width":2048,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/ITB07_bc888d1a-8421-4dbc-8789-f32afb65fb15.jpg?v=1710169105"},"aspect_ratio":1.0,"height":2048,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/ITB07_bc888d1a-8421-4dbc-8789-f32afb65fb15.jpg?v=1710169105","width":2048},{"alt":"Rzcrew Garage Billet Individual Throttle Bodies kit - Nissan - Primera HP10","id":26122234888374,"position":3,"preview_image":{"aspect_ratio":1.0,"height":2048,"width":2048,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/ITB01_48f06b2d-3e5f-4e53-8b85-e180795c7904.jpg?v=1710169110"},"aspect_ratio":1.0,"height":2048,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/ITB01_48f06b2d-3e5f-4e53-8b85-e180795c7904.jpg?v=1710169110","width":2048},{"alt":"Rzcrew Garage Billet Individual Throttle Bodies kit - Nissan - Primera HP10","id":26122234921142,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Racing_Individual_Throttle_Body_67fac8d6-4ffd-4e1e-94d0-d5159a8f330e.jpg?v=1710169113"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Racing_Individual_Throttle_Body_67fac8d6-4ffd-4e1e-94d0-d5159a8f330e.jpg?v=1710169113","width":1600},{"alt":"Rzcrew Garage Billet Individual Throttle Bodies kit - Nissan - Primera HP10","id":26122234953910,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Racing_Individual_Throttle_Body_2_b566448a-02ea-44d7-8ee7-58efb9ff0c88.jpg?v=1710169116"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Racing_Individual_Throttle_Body_2_b566448a-02ea-44d7-8ee7-58efb9ff0c88.jpg?v=1710169116","width":1600},{"alt":"Rzcrew Garage Billet Individual Throttle Bodies kit - Nissan - Primera HP10","id":26122234986678,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_ITB_Runner_4age_ed12b8d0-e192-46c0-b507-bc7eca7532f3.jpg?v=1710169117"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_ITB_Runner_4age_ed12b8d0-e192-46c0-b507-bc7eca7532f3.jpg?v=1710169117","width":1600},{"alt":"Rzcrew Garage Billet Individual Throttle Bodies kit - Nissan - Primera HP10","id":26122235019446,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1212,"width":1212,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/RZ-VM-SC_e4bce7a5-4c4c-4807-b031-7cd3c0155913.jpg?v=1710169119"},"aspect_ratio":1.0,"height":1212,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/RZ-VM-SC_e4bce7a5-4c4c-4807-b031-7cd3c0155913.jpg?v=1710169119","width":1212},{"alt":"Rzcrew Garage Billet Individual Throttle Bodies kit - Nissan - Primera HP10","id":26122235052214,"position":8,"preview_image":{"aspect_ratio":1.335,"height":809,"width":1080,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2018-12-15_at_12.27.49_e455f930-3c44-4acb-8bea-3add7a8bb2b5.jpg?v=1710169121"},"aspect_ratio":1.335,"height":809,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2018-12-15_at_12.27.49_e455f930-3c44-4acb-8bea-3add7a8bb2b5.jpg?v=1710169121","width":1080},{"alt":"Rzcrew Garage Billet Individual Throttle Body Mechanism","id":26122235084982,"position":9,"preview_image":{"aspect_ratio":1.335,"height":809,"width":1080,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.23_1_af4dad5e-edc7-4f9b-b27e-7f3b414e8ce3.jpg?v=1710169124"},"aspect_ratio":1.335,"height":809,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.23_1_af4dad5e-edc7-4f9b-b27e-7f3b414e8ce3.jpg?v=1710169124","width":1080},{"alt":"Rzcrew Garage Billet Individual Throttle Body Mechanism","id":26122235117750,"position":10,"preview_image":{"aspect_ratio":1.335,"height":809,"width":1080,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.24_1de4aa4a-3df0-44e4-9433-7060e1275cf9.jpg?v=1710169126"},"aspect_ratio":1.335,"height":809,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.24_1de4aa4a-3df0-44e4-9433-7060e1275cf9.jpg?v=1710169126","width":1080},{"alt":"Rzcrew Garage Billet Individual Throttle Body Runners","id":26122235150518,"position":11,"preview_image":{"aspect_ratio":1.335,"height":809,"width":1080,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2018-12-15_at_12.27.49_0a659144-94c8-4821-9f5a-f87ee3f4041a.jpg?v=1710169128"},"aspect_ratio":1.335,"height":809,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2018-12-15_at_12.27.49_0a659144-94c8-4821-9f5a-f87ee3f4041a.jpg?v=1710169128","width":1080},{"alt":"Rzcrew Garage Billet Individual Throttle Body Teflon Gasket","id":26122235183286,"position":12,"preview_image":{"aspect_ratio":1.335,"height":809,"width":1080,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.23_1_97f97bc1-1229-4524-a665-88ac1b5b0836.jpg?v=1710169130"},"aspect_ratio":1.335,"height":809,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.23_1_97f97bc1-1229-4524-a665-88ac1b5b0836.jpg?v=1710169130","width":1080},{"alt":"Rzcrew Garage Billet Individual Throttle Body Trumpet","id":26122235216054,"position":13,"preview_image":{"aspect_ratio":1.335,"height":809,"width":1080,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.24_54ac8ac2-db29-4984-a32d-00319939cc5f.jpg?v=1710169132"},"aspect_ratio":1.335,"height":809,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.24_54ac8ac2-db29-4984-a32d-00319939cc5f.jpg?v=1710169132","width":1080},{"alt":"Rzcrew Garage Billet Individual Throttle Body anodisation colour","id":26122235248822,"position":14,"preview_image":{"aspect_ratio":1.335,"height":809,"width":1080,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.23_d805ca81-b0f7-4ffb-b157-375a07d3b5aa.jpg?v=1710169133"},"aspect_ratio":1.335,"height":809,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.23_d805ca81-b0f7-4ffb-b157-375a07d3b5aa.jpg?v=1710169133","width":1080},{"alt":"Rzcrew Garage Billet Individual Throttle Body on k20a Engine","id":26122235281590,"position":15,"preview_image":{"aspect_ratio":1.335,"height":809,"width":1080,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.22_1_05a81b87-a6de-4f3d-a980-16b7b0e017d2.jpg?v=1710169135"},"aspect_ratio":1.335,"height":809,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.22_1_05a81b87-a6de-4f3d-a980-16b7b0e017d2.jpg?v=1710169135","width":1080},{"alt":"Rzcrew Garage Billet Individual Throttle Body on k20a Engine","id":26122235314358,"position":16,"preview_image":{"aspect_ratio":2.202,"height":436,"width":960,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Itb_mechanism_9bb1e0d1-ee2d-46df-b969-ab67553bbdb2.jpg?v=1710169137"},"aspect_ratio":2.202,"height":436,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Itb_mechanism_9bb1e0d1-ee2d-46df-b969-ab67553bbdb2.jpg?v=1710169137","width":960},{"alt":"Rzcrew Garage Billet Individual Throttle Body on k20a Engine","id":26122235347126,"position":17,"preview_image":{"aspect_ratio":1.493,"height":643,"width":960,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrewgarage_itb_mechanism2_dcae6103-b5c1-4b0b-b6f3-6ed5f025beb9.jpg?v=1710169138"},"aspect_ratio":1.493,"height":643,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrewgarage_itb_mechanism2_dcae6103-b5c1-4b0b-b6f3-6ed5f025beb9.jpg?v=1710169138","width":960},{"alt":"Rzcrew Garage Billet Individual Throttle Body on k20a Engine","id":26122235379894,"position":18,"preview_image":{"aspect_ratio":1.333,"height":720,"width":960,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrewgarage_Itb_Runner_049911d4-3fb5-4be2-a149-b73ba1d1eaf4.jpg?v=1710169141"},"aspect_ratio":1.333,"height":720,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrewgarage_Itb_Runner_049911d4-3fb5-4be2-a149-b73ba1d1eaf4.jpg?v=1710169141","width":960},{"alt":"Rzcrew Garage Billet Individual Throttle Body Runners","id":26122235412662,"position":19,"preview_image":{"aspect_ratio":1.193,"height":805,"width":960,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrewgarage_ITB_Gasket_af532431-c4f5-4985-bbe5-c2bcad849608.jpg?v=1710169142"},"aspect_ratio":1.193,"height":805,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrewgarage_ITB_Gasket_af532431-c4f5-4985-bbe5-c2bcad849608.jpg?v=1710169142","width":960},{"alt":"Rzcrew Racing Billet Individual Throttle Bodies kit - Nissan - Primera HP10 - [variant sku] - RZCrewGarage","id":26122235445430,"position":20,"preview_image":{"aspect_ratio":1.561,"height":615,"width":960,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrewgarage_Itb_Trumpet_d4787f32-a6f2-4cbe-a2d4-b9938ec2d58d.jpg?v=1710169144"},"aspect_ratio":1.561,"height":615,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrewgarage_Itb_Trumpet_d4787f32-a6f2-4cbe-a2d4-b9938ec2d58d.jpg?v=1710169144","width":960},{"alt":"Rzcrew Racing Billet Individual Throttle Bodies kit - Nissan - Primera HP10 - [variant sku] - RZCrewGarage","id":26122235478198,"position":21,"preview_image":{"aspect_ratio":1.0,"height":927,"width":927,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Anodisation_c058cec4-0545-4b0d-9f5a-0d18337f2f2d.jpg?v=1710169146"},"aspect_ratio":1.0,"height":927,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Anodisation_c058cec4-0545-4b0d-9f5a-0d18337f2f2d.jpg?v=1710169146","width":927},{"alt":"Rzcrew Racing Billet Individual Throttle Bodies kit - Nissan - Primera HP10 - [variant sku] - RZCrewGarage","id":26122235510966,"position":22,"preview_image":{"aspect_ratio":2.0,"height":540,"width":1080,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.21_b0f83088-8bcc-4270-a50c-c5c392b6837a.jpg?v=1710169147"},"aspect_ratio":2.0,"height":540,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.21_b0f83088-8bcc-4270-a50c-c5c392b6837a.jpg?v=1710169147","width":1080},{"alt":"Rzcrew Racing Billet Individual Throttle Bodies kit - Nissan - Primera HP10 - [variant sku] - RZCrewGarage","id":26122235543734,"position":23,"preview_image":{"aspect_ratio":1.335,"height":809,"width":1080,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.20_08319e65-a701-4f02-90b3-c14ac0d354af.jpg?v=1710169149"},"aspect_ratio":1.335,"height":809,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.20_08319e65-a701-4f02-90b3-c14ac0d354af.jpg?v=1710169149","width":1080},{"alt":"Rzcrew Racing Billet Individual Throttle Bodies kit - Nissan - Primera HP10 - [variant sku] - RZCrewGarage","id":26122235576502,"position":24,"preview_image":{"aspect_ratio":1.333,"height":810,"width":1080,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.20_1_3889d705-aa02-4678-9ed2-b2880730260a.jpg?v=1710169151"},"aspect_ratio":1.333,"height":810,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.20_1_3889d705-aa02-4678-9ed2-b2880730260a.jpg?v=1710169151","width":1080},{"alt":"Rzcrew Racing Billet Individual Throttle Bodies kit - Nissan - Primera HP10 - [variant sku] - RZCrewGarage","id":26122235609270,"position":25,"preview_image":{"aspect_ratio":1.333,"height":810,"width":1080,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.20_2_94f35829-1978-491c-8db8-91daab6f1791.jpg?v=1710169153"},"aspect_ratio":1.333,"height":810,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.20_2_94f35829-1978-491c-8db8-91daab6f1791.jpg?v=1710169153","width":1080},{"alt":"Rzcrew Racing Billet Individual Throttle Bodies kit - Nissan - Primera HP10 - [variant sku] - RZCrewGarage","id":26122235642038,"position":26,"preview_image":{"aspect_ratio":1.333,"height":1200,"width":1600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2023-04-13_at_17.20.55_1d517edd-615c-4171-884e-3c80af652e19.jpg?v=1710169155"},"aspect_ratio":1.333,"height":1200,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2023-04-13_at_17.20.55_1d517edd-615c-4171-884e-3c80af652e19.jpg?v=1710169155","width":1600},{"alt":"Rzcrew Racing Billet Individual Throttle Bodies kit - Nissan - Primera HP10 - [variant sku] - RZCrewGarage","id":26122235674806,"position":27,"preview_image":{"aspect_ratio":1.333,"height":1200,"width":1600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2023-04-13_at_17.20.55_dd84569b-9a95-4d56-9f1e-8fe880b749aa.jpg?v=1710169157"},"aspect_ratio":1.333,"height":1200,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2023-04-13_at_17.20.55_dd84569b-9a95-4d56-9f1e-8fe880b749aa.jpg?v=1710169157","width":1600},{"alt":"Rzcrew Racing Billet Individual Throttle Bodies kit - Nissan - Primera HP10 - [variant sku] - RZCrewGarage","id":26122235707574,"position":28,"preview_image":{"aspect_ratio":1.092,"height":927,"width":1012,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Anodisation-Colours_754f66bb-0f46-4faf-9428-bb24888e4782.jpg?v=1710169159"},"aspect_ratio":1.092,"height":927,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Anodisation-Colours_754f66bb-0f46-4faf-9428-bb24888e4782.jpg?v=1710169159","width":1012}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003eReference Number: BITB-N-P10-34mm-SS\u003cbr\u003eIntake Type: ITB Kit\u003cbr\u003ePlease choose Throttle diameter during check out:\u003cbr\u003e45mm\u003cbr\u003e48mm\u003cbr\u003e50mm\u003cbr\u003e52mm\u003cbr\u003e55mm\u003cbr\u003eWe have now added the option to choose no trumpet and purchase Our Titanium Velocity stack for your kit. Please refer to this link: \u003ca href=\"url\"\u003ehttps:\/\/rzcrewgarage.com\/products\/rzcrew-racing-titanium-velocity-stack-set-trumpet-for-rzcrew-racing-indiviual-throttle-body-itb\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003eCustom diameter available on request. Cost may vary. Please contact us.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecial Note about ITB on this particular car model:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eMaximum Recommended Trumpet Length: 75mmThis is the third version of our Individual Throttle Body design, introducing a fully customisable linkage system for perfect idle tuning.\u003cbr\u003e\u003cbr\u003eThe New ITB V3 feature:\u003cbr\u003e\u003cbr\u003e*New multidirectional linkage assembly uses Japanese-made bearings for a smooth throttle response. The new linkage system allows for individual adjustment of each throttle plate individually for the precise idle fine tuning.\u003cbr\u003e*The introduction of a new CNC Machined Titanium shaft avoids any distortion due to wear and tear and keeps the assembly light for a great pedal feel.\u003cbr\u003e*Each throttle body flap is now individually customised to each throttle body for perfect fitment, preventing any leak.\u003cbr\u003e*This new system also allows us to machine 55mm throttle body opening for the most hardcore setups.\u003cbr\u003e\n*Billet Individual throttle body adapter, also called Runner, are calculated to make the installation easy and keep the ITB Mechanism closed to the head to ensure perfect flow and less turbulence. The shorter flow's travel also enhances engine response and Torque.\u003cbr\u003e*The HP10 kits feature a Runner adapter made for EV14 Top Feed injectors ( K series Injectors). Coming with a complementary fuel rail, opens more opportunities to change Injector flow to match your setup as well as a better flow pattern switching from Side Feed to top Feed.\u003cbr\u003e\n* Billet ITB system. Our ITB are machined in one piece of billet aluminum on high precision CNC Machine to ensure perfect fitting and flow. Fully mounted on ball bearing to get a smooth pedal feel and perfect air delivery in each cylinder. Each Throttle plate are manufactured in copper to avoid any sticky feeling under high heat. Throttle Diameters may Vary depending on engine model, we usually propose 3 different diameters yet you can contact us for any design. The Throttle body diameter are listed on the specs so let us know during time of ordering.\u003cbr\u003eAnodisation are also available on request for the ITB Body. If you want to make your engine bay shines, we propose 8 different colours to match your style! Please check the picture and let us know during checkout. ( default colour is silver)\u003cbr\u003eEach Throttle plates are commanded by a single mechanism making the hidling tuning of each cylinder a breeze and avoiding chaotic hidling.\n* Teflon gaskets are included between the runner and the itb as well as the trumpet to ensure low heat conductivity.\u003cbr\u003e\n* Custom lenght Trumpet. It is important to choose the right trumpet lenght depending on your application. For higher peak power we recommend shorter Trumpet lenght. For Torque, we recommend longer lenght. You can choose the appropriate lenght in our option menu on the right. Certain engine responses are different so feel free to enquire, we will ba glad to help you.\u003cbr\u003e\u003cbr\u003e* Vaccum Box is included, get all your vaccum set at once and link it to your brake booster and other encilliaries. It also includes all billet fitting with different diameter to get it linked to your vaccum circuit promptly. Please note that vaccum hoses are not included in this kit.\u003cbr\u003e\u003cbr\u003eRzcrew Garage ITB are modular. They follow the same bolt pattern as our Airstream Billet Manifold, with that in mind you can easily upgrade your Airstream billet Manifold to ITB or purchase the intake manifold box separetly if you wish to run an air filter on your ITB setup.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSee them in Action:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIn December 2019, we flew to France to meet our good friends at CRTUNE, the mission was simple: Dyno and test our prototype. Their K20A Eg6 is already quite a beast but well power is never enough. Their setup is the following:\u003cbr\u003e*DC5 K20A\u003cbr\u003eStock Compression Ratio\u003cbr\u003eDrag cartel 2.2 Camshafts\u003cbr\u003eDry Sump setup\u003cbr\u003eExhaust header and catback 2.5\"\u003cbr\u003eAdding our Itb to the mix made 278HP and 267Nm Torque. Video and pictures Below!\u003cbr\u003e\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/uMa-hxTbHPE\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\" width=\"750\" height=\"422\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003cbr\u003eImportant Note:\u003cbr\u003e\nOur system follows the stock Throttle position sensor for ease of installation, please note that you will need a standalone ECU for starting you car and tuning it properly.We highly recommend a professional tuner to do the job and install them.\u003cbr\u003eFitting ITBs required higher compressions as well as up-rated camshafts to ensure a proper Horse power and Torque Gain, Fitting it on a stock engine is do-able yet not the best to maximise your setup.\u003cbr\u003eAll our Individual Throttle bodies are actionned by cable and you may be required to convert your pedal and mechanism if using EThrottle. Modification on your accelerator cable may be needed in certain case.\u003cbr\u003e\u003cbr\u003e It may not be available for your car but feel free to ask, we will be glad to customize something for you.\u003cbr\u003e\u003cbr\u003e Please note that this product is made on order and take a minimum of 1 month production time!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003c\/p\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003ePrimera | HP10 | 1989-1992 | NA | SR20DE | I4\u003cbr\u003ePrimera | HP10 | 1992-1994 | NA | SR20DE | I4\u003cbr\u003ePrimera | HP10 | 1994-1995 | NA | SR20DE | I4\u003c!--split--\u003e"}

{"id":6899575455926,"title":"Rzcrew Racing - Custom Thermal Gasket - Universal","handle":"rzcrew-racing-custom-thermal-gasket-universal-rzig-custom-tb","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003eReference Number: RZIG-CUSTOM-TB\u003cbr\u003eIntake Type: Intake Manifold\u003cbr\u003e\u003cbr\u003eRzcrewGarage Thermal Throttle Body and Intake Manifold Gaskets are designed as direct replacements for OEM gaskets. Using an advanced high temperature thermal nylon material protects against heat soak and maximizes horsepower gains by reducing heat transfer. With the use of RzcrewGarage thermal gaskets, air intake temps are minimized which provides the your engine cooler air for combustion, and that means horsepower. This and bypassing several heat sources can provide you up to 5% more power. Our Racing Thermal Throttle Body gaskets are perfect for your race, weekend warrior and street application.\u003cbr\u003e\u003cbr\u003eFor custom application, please provide a 1:1 scale scan of you gasket and send it to us via email. Choose the gasket type you need in the menu.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e","published_at":"2021-07-26T16:46:41+08:00","created_at":"2021-07-26T16:46:42+08:00","vendor":"Rzcrew Racing","type":"Intake Manifold Gasket","tags":["0","1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","civic-fd2-2007-2010-na-k20z2-i4","honda","intake","intake-manifold","intake-manifold-gasket","intake-manifolds","mazda","nissan","rzcrew-garage","rzcrew-racing","sg1","subaru","suzuki","toyota","Universal","ws130"],"price":5100,"price_min":5100,"price_max":15300,"available":true,"price_varies":true,"compare_at_price":6000,"compare_at_price_min":6000,"compare_at_price_max":18000,"compare_at_price_varies":true,"variants":[{"id":40220998172854,"title":"Single Throttle body","option1":"Single Throttle body","option2":null,"option3":null,"sku":"RZIG-CUSTOM-TB","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Custom Thermal Gasket - Universal - Single Throttle body","public_title":"Single Throttle body","options":["Single Throttle body"],"price":5100,"weight":550,"compare_at_price":6000,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40220998205622,"title":"Intake Manifold Inline 3","option1":"Intake Manifold Inline 3","option2":null,"option3":null,"sku":"RZIG-CUSTOM-IM3","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Custom Thermal Gasket - Universal - Intake Manifold Inline 3","public_title":"Intake Manifold Inline 3","options":["Intake Manifold Inline 3"],"price":8420,"weight":550,"compare_at_price":9900,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40220998238390,"title":"Intake Manifold Inline 4","option1":"Intake Manifold Inline 4","option2":null,"option3":null,"sku":"RZIG-CUSTOM-IM4","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Custom Thermal Gasket - Universal - Intake Manifold Inline 4","public_title":"Intake Manifold Inline 4","options":["Intake Manifold Inline 4"],"price":8420,"weight":550,"compare_at_price":9900,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40220998271158,"title":"Intake Manifold Inline 5","option1":"Intake Manifold Inline 5","option2":null,"option3":null,"sku":"RZIG-CUSTOM-IM5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Custom Thermal Gasket - Universal - Intake Manifold Inline 5","public_title":"Intake Manifold Inline 5","options":["Intake Manifold Inline 5"],"price":8420,"weight":650,"compare_at_price":9900,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40220998303926,"title":"Intake Manifold Inline 6","option1":"Intake Manifold Inline 6","option2":null,"option3":null,"sku":"RZIG-CUSTOM-IM6","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Custom Thermal Gasket - Universal - Intake Manifold Inline 6","public_title":"Intake Manifold Inline 6","options":["Intake Manifold Inline 6"],"price":10200,"weight":1000,"compare_at_price":12000,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40220998336694,"title":"Intake Manifold V6","option1":"Intake Manifold V6","option2":null,"option3":null,"sku":"RZIG-CUSTOM-IMV6","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Custom Thermal Gasket - Universal - Intake Manifold V6","public_title":"Intake Manifold V6","options":["Intake Manifold V6"],"price":11900,"weight":1000,"compare_at_price":14000,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40220998369462,"title":"Intake Manifold V8","option1":"Intake Manifold V8","option2":null,"option3":null,"sku":"RZIG-CUSTOM-IMV8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Custom Thermal Gasket - Universal - Intake Manifold V8","public_title":"Intake Manifold V8","options":["Intake Manifold V8"],"price":15300,"weight":1200,"compare_at_price":18000,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-custom-thermal-gasket-universal-rzcrew.jpg?v=1710324089"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-custom-thermal-gasket-universal-rzcrew.jpg?v=1710324089","options":["Type"],"media":[{"alt":"Rzcrew Racing - Custom Thermal Gasket - Universal - RZIG-CUSTOM-TB","id":25445231329462,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-custom-thermal-gasket-universal-rzcrew.jpg?v=1710324089"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-custom-thermal-gasket-universal-rzcrew.jpg?v=1710324089","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003eReference Number: RZIG-CUSTOM-TB\u003cbr\u003eIntake Type: Intake Manifold\u003cbr\u003e\u003cbr\u003eRzcrewGarage Thermal Throttle Body and Intake Manifold Gaskets are designed as direct replacements for OEM gaskets. Using an advanced high temperature thermal nylon material protects against heat soak and maximizes horsepower gains by reducing heat transfer. With the use of RzcrewGarage thermal gaskets, air intake temps are minimized which provides the your engine cooler air for combustion, and that means horsepower. This and bypassing several heat sources can provide you up to 5% more power. Our Racing Thermal Throttle Body gaskets are perfect for your race, weekend warrior and street application.\u003cbr\u003e\u003cbr\u003eFor custom application, please provide a 1:1 scale scan of you gasket and send it to us via email. Choose the gasket type you need in the menu.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e"}

{"id":7646610620598,"title":"Rzcrew Racing - GoTrack \"GT\" Monotube Coilover Kit - Nissan Skyline ER32","handle":"rzcrew-racing-mt1gt-ni09-01","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003ePart Number: MT1GT-NI09-01\u003cbr\u003eFront Mounts: Reinforced Rubber Mount\u003cbr\u003eRear Mounts: Reinforced Rubber Mount\u003cbr\u003eSpring Rates:\u003cbr\u003eFront:12KG\u003cbr\u003eRear: 7.2KG\u003cbr\u003e\u003cbr\u003eRZCrew Racing GoTrack \"GT\" Series is a high-spec fast street\/race damper that focuses on performance and precise handling.\u003cbr\u003e\u003cbr\u003eUnlike traditional coilover kits that lower your car for general street driving, the GT kit provides a lowered ride and massively improved handling, thanks to higher spring rates and a redefined front \/ rear high speed balance.\u003cbr\u003eThe full body length adjustment and separate pre-load setting allow a lowered stance without sacrificing bump-stroke travel.\u003cbr\u003eIts inverted Monotube design allows for high precision driving and predictability.\u003cbr\u003e\nThe GoTrack Coilover kits feature 32-steps adjustable dampening for precise suspension tuning.\u003cbr\u003eThis suspension kit can be fully overhauled.\u003cbr\u003eWe learnt from other brands that downtime is never ideal for our customers, thus all our coilover kits carry a strict 1 year one-to-one strut replacement warranty in the case of any leak. Pillow ball are not included in the warranty yet replacement parts are avilable.\u003cbr\u003e\u003cbr\u003eOur GoTrack Coilover kits feature:\u003cbr\u003e\u003cbr\u003e- Inverted Monotube design for spirited driving and racing.\u003cbr\u003e- Full body length adjustment with separate spring pre-load to avoid bumpiness.\u003cbr\u003e- Fully treated aluminum body for strength and life span.\u003cbr\u003e- High quality Fush Silkolene oil for better damper temperature control and lower friction during hard cornering\u003cbr\u003e- Teflon springs seats to avoid squeaky noises.\u003cbr\u003e- 32 adjustement steps, for precise suspension tuning.\u003cbr\u003e- Free choice of spring rate depending on model.\u003cbr\u003e- 1 year one-to-one replacement strut on any leak.\u003cbr\u003e- The RZCrew Racing GT Monotube Coilovers are track-tested, and their reliability has been proven during the 2019 Sepang 1000km Race held in Malaysia. Our suspensions completed the race with no sign of leakage or registered fatigue during the after-race inspection.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline | ER32 | 1991-1993 | NA | RB25DE | I6\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2023-08-20T13:07:24+08:00","created_at":"2023-08-20T12:30:40+08:00","vendor":"Rzcrew Racing","type":"Coilovers and Springs","tags":["1991","1992","1993","coilovers-and-springs","dampening-and-height-adjustable","nissan","rzcrew-garage","rzcrew-racing","sg1","skyline-er32-1991-1993-na-rb25de-i6","ws110"],"price":109000,"price_min":109000,"price_max":109000,"available":true,"price_varies":false,"compare_at_price":109000,"compare_at_price_min":109000,"compare_at_price_max":109000,"compare_at_price_varies":false,"variants":[{"id":42348665798838,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MT1GT-NI09-01","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - GoTrack \"GT\" Monotube Coilover Kit - Nissan Skyline ER32","public_title":null,"options":["Default Title"],"price":109000,"weight":25000,"compare_at_price":109000,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-coilover-kit-nissan-skyline-er32-rzcrew.jpg?v=1710315292"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-coilover-kit-nissan-skyline-er32-rzcrew.jpg?v=1710315292","options":["Title"],"media":[{"alt":"Rzcrew Racing - GoTrack \"GT\" Monotube Coilover Kit - Nissan Skyline ER32 - RZCrewGarage","id":26512232939702,"position":1,"preview_image":{"aspect_ratio":1.329,"height":1429,"width":1899,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-coilover-kit-nissan-skyline-er32-rzcrew.jpg?v=1710315292"},"aspect_ratio":1.329,"height":1429,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-coilover-kit-nissan-skyline-er32-rzcrew.jpg?v=1710315292","width":1899}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003ePart Number: MT1GT-NI09-01\u003cbr\u003eFront Mounts: Reinforced Rubber Mount\u003cbr\u003eRear Mounts: Reinforced Rubber Mount\u003cbr\u003eSpring Rates:\u003cbr\u003eFront:12KG\u003cbr\u003eRear: 7.2KG\u003cbr\u003e\u003cbr\u003eRZCrew Racing GoTrack \"GT\" Series is a high-spec fast street\/race damper that focuses on performance and precise handling.\u003cbr\u003e\u003cbr\u003eUnlike traditional coilover kits that lower your car for general street driving, the GT kit provides a lowered ride and massively improved handling, thanks to higher spring rates and a redefined front \/ rear high speed balance.\u003cbr\u003eThe full body length adjustment and separate pre-load setting allow a lowered stance without sacrificing bump-stroke travel.\u003cbr\u003eIts inverted Monotube design allows for high precision driving and predictability.\u003cbr\u003e\nThe GoTrack Coilover kits feature 32-steps adjustable dampening for precise suspension tuning.\u003cbr\u003eThis suspension kit can be fully overhauled.\u003cbr\u003eWe learnt from other brands that downtime is never ideal for our customers, thus all our coilover kits carry a strict 1 year one-to-one strut replacement warranty in the case of any leak. Pillow ball are not included in the warranty yet replacement parts are avilable.\u003cbr\u003e\u003cbr\u003eOur GoTrack Coilover kits feature:\u003cbr\u003e\u003cbr\u003e- Inverted Monotube design for spirited driving and racing.\u003cbr\u003e- Full body length adjustment with separate spring pre-load to avoid bumpiness.\u003cbr\u003e- Fully treated aluminum body for strength and life span.\u003cbr\u003e- High quality Fush Silkolene oil for better damper temperature control and lower friction during hard cornering\u003cbr\u003e- Teflon springs seats to avoid squeaky noises.\u003cbr\u003e- 32 adjustement steps, for precise suspension tuning.\u003cbr\u003e- Free choice of spring rate depending on model.\u003cbr\u003e- 1 year one-to-one replacement strut on any leak.\u003cbr\u003e- The RZCrew Racing GT Monotube Coilovers are track-tested, and their reliability has been proven during the 2019 Sepang 1000km Race held in Malaysia. Our suspensions completed the race with no sign of leakage or registered fatigue during the after-race inspection.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline | ER32 | 1991-1993 | NA | RB25DE | I6\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":7646610653366,"title":"Rzcrew Racing - GoTrack \"GT\" Monotube Coilover Kit - Nissan Skyline GT-R BNR32","handle":"rzcrew-racing-mt1gt-ni09-02","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003ePart Number: MT1GT-NI09-02\u003cbr\u003eFront Mounts: Reinforced Rubber Mount\u003cbr\u003eRear Mounts: Reinforced Rubber Mount\u003cbr\u003eSpring Rates:\u003cbr\u003eFront:12KG\u003cbr\u003eRear: 7.2KG\u003cbr\u003e\u003cbr\u003eRZCrew Racing GoTrack \"GT\" Series is a high-spec fast street\/race damper that focuses on performance and precise handling.\u003cbr\u003e\u003cbr\u003eUnlike traditional coilover kits that lower your car for general street driving, the GT kit provides a lowered ride and massively improved handling, thanks to higher spring rates and a redefined front \/ rear high speed balance.\u003cbr\u003eThe full body length adjustment and separate pre-load setting allow a lowered stance without sacrificing bump-stroke travel.\u003cbr\u003eIts inverted Monotube design allows for high precision driving and predictability.\u003cbr\u003e\nThe GoTrack Coilover kits feature 32-steps adjustable dampening for precise suspension tuning.\u003cbr\u003eThis suspension kit can be fully overhauled.\u003cbr\u003eWe learnt from other brands that downtime is never ideal for our customers, thus all our coilover kits carry a strict 1 year one-to-one strut replacement warranty in the case of any leak. Pillow ball are not included in the warranty yet replacement parts are avilable.\u003cbr\u003e\u003cbr\u003eOur GoTrack Coilover kits feature:\u003cbr\u003e\u003cbr\u003e- Inverted Monotube design for spirited driving and racing.\u003cbr\u003e- Full body length adjustment with separate spring pre-load to avoid bumpiness.\u003cbr\u003e- Fully treated aluminum body for strength and life span.\u003cbr\u003e- High quality Fush Silkolene oil for better damper temperature control and lower friction during hard cornering\u003cbr\u003e- Teflon springs seats to avoid squeaky noises.\u003cbr\u003e- 32 adjustement steps, for precise suspension tuning.\u003cbr\u003e- Free choice of spring rate depending on model.\u003cbr\u003e- 1 year one-to-one replacement strut on any leak.\u003cbr\u003e- The RZCrew Racing GT Monotube Coilovers are track-tested, and their reliability has been proven during the 2019 Sepang 1000km Race held in Malaysia. Our suspensions completed the race with no sign of leakage or registered fatigue during the after-race inspection.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2023-08-20T13:07:26+08:00","created_at":"2023-08-20T12:30:42+08:00","vendor":"Rzcrew Racing","type":"Coilovers and Springs","tags":["1989","1990","1991","1992","1993","1994","coilovers-and-springs","dampening-and-height-adjustable","nissan","rzcrew-garage","rzcrew-racing","sg1","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","ws110"],"price":109000,"price_min":109000,"price_max":109000,"available":true,"price_varies":false,"compare_at_price":109000,"compare_at_price_min":109000,"compare_at_price_max":109000,"compare_at_price_varies":false,"variants":[{"id":42348665831606,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MT1GT-NI09-02","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - GoTrack \"GT\" Monotube Coilover Kit - Nissan Skyline GT-R BNR32","public_title":null,"options":["Default Title"],"price":109000,"weight":25000,"compare_at_price":109000,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-coilover-kit-nissan-skyline-gt-r-bnr32-rzcrew.jpg?v=1710315292"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-coilover-kit-nissan-skyline-gt-r-bnr32-rzcrew.jpg?v=1710315292","options":["Title"],"media":[{"alt":"Rzcrew Racing - GoTrack \"GT\" Monotube Coilover Kit - Nissan Skyline GT-R BNR32 - RZCrewGarage","id":26512232972470,"position":1,"preview_image":{"aspect_ratio":0.75,"height":2040,"width":1530,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-coilover-kit-nissan-skyline-gt-r-bnr32-rzcrew.jpg?v=1710315292"},"aspect_ratio":0.75,"height":2040,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-coilover-kit-nissan-skyline-gt-r-bnr32-rzcrew.jpg?v=1710315292","width":1530}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003ePart Number: MT1GT-NI09-02\u003cbr\u003eFront Mounts: Reinforced Rubber Mount\u003cbr\u003eRear Mounts: Reinforced Rubber Mount\u003cbr\u003eSpring Rates:\u003cbr\u003eFront:12KG\u003cbr\u003eRear: 7.2KG\u003cbr\u003e\u003cbr\u003eRZCrew Racing GoTrack \"GT\" Series is a high-spec fast street\/race damper that focuses on performance and precise handling.\u003cbr\u003e\u003cbr\u003eUnlike traditional coilover kits that lower your car for general street driving, the GT kit provides a lowered ride and massively improved handling, thanks to higher spring rates and a redefined front \/ rear high speed balance.\u003cbr\u003eThe full body length adjustment and separate pre-load setting allow a lowered stance without sacrificing bump-stroke travel.\u003cbr\u003eIts inverted Monotube design allows for high precision driving and predictability.\u003cbr\u003e\nThe GoTrack Coilover kits feature 32-steps adjustable dampening for precise suspension tuning.\u003cbr\u003eThis suspension kit can be fully overhauled.\u003cbr\u003eWe learnt from other brands that downtime is never ideal for our customers, thus all our coilover kits carry a strict 1 year one-to-one strut replacement warranty in the case of any leak. Pillow ball are not included in the warranty yet replacement parts are avilable.\u003cbr\u003e\u003cbr\u003eOur GoTrack Coilover kits feature:\u003cbr\u003e\u003cbr\u003e- Inverted Monotube design for spirited driving and racing.\u003cbr\u003e- Full body length adjustment with separate spring pre-load to avoid bumpiness.\u003cbr\u003e- Fully treated aluminum body for strength and life span.\u003cbr\u003e- High quality Fush Silkolene oil for better damper temperature control and lower friction during hard cornering\u003cbr\u003e- Teflon springs seats to avoid squeaky noises.\u003cbr\u003e- 32 adjustement steps, for precise suspension tuning.\u003cbr\u003e- Free choice of spring rate depending on model.\u003cbr\u003e- 1 year one-to-one replacement strut on any leak.\u003cbr\u003e- The RZCrew Racing GT Monotube Coilovers are track-tested, and their reliability has been proven during the 2019 Sepang 1000km Race held in Malaysia. Our suspensions completed the race with no sign of leakage or registered fatigue during the after-race inspection.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":7646611308726,"title":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan 180 SX PS13\/RPS13","handle":"rzcrew-racing-mt1gt-ni13-01-ps13-rps13","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003ePart Number: MT1GT-NI13-01\u003cbr\u003eFront Mounts: Reinforced Rubber Mount OR Pillow Ball\u003cbr\u003eRear Mounts: Reinforced Rubber Mount OR Pillow Ball\u003cbr\u003eSpring Rates:\u003cbr\u003eFront:8.7KG\/8KG\u003cbr\u003eRear: 6.5KG\/5KG\u003cbr\u003e\u003cbr\u003eRZCrew Racing GoTrack \"GT\" Series is a high-spec fast street\/race damper that focuses on performance and precise handling.\u003cbr\u003e\u003cbr\u003eUnlike traditional coilover kits that lower your car for general street driving, the GT kit provides a lowered ride and massively improved handling, thanks to higher spring rates and a redefined front \/ rear high speed balance.\u003cbr\u003eThe full body length adjustment and separate pre-load setting allow a lowered stance without sacrificing bump-stroke travel.\u003cbr\u003eIts inverted Monotube design allows for high precision driving and predictability.\u003cbr\u003e\nThe GoTrack Coilover kits feature 32-steps adjustable dampening for precise suspension tuning.\u003cbr\u003eThis suspension kit can be fully overhauled.\u003cbr\u003eWe learnt from other brands that downtime is never ideal for our customers, thus all our coilover kits carry a strict 1 year one-to-one strut replacement warranty in the case of any leak. Pillow ball are not included in the warranty yet replacement parts are avilable.\u003cbr\u003e\u003cbr\u003eOur GoTrack Coilover kits feature:\u003cbr\u003e\u003cbr\u003e- Inverted Monotube design for spirited driving and racing.\u003cbr\u003e- Full body length adjustment with separate spring pre-load to avoid bumpiness.\u003cbr\u003e- Fully treated aluminum body for strength and life span.\u003cbr\u003e- High quality Fush Silkolene oil for better damper temperature control and lower friction during hard cornering\u003cbr\u003e- Teflon springs seats to avoid squeaky noises.\u003cbr\u003e- 32 adjustement steps, for precise suspension tuning.\u003cbr\u003e- Free choice of spring rate depending on model.\u003cbr\u003e- 1 year one-to-one replacement strut on any leak.\u003cbr\u003e- The RZCrew Racing GT Monotube Coilovers are track-tested, and their reliability has been proven during the 2019 Sepang 1000km Race held in Malaysia. Our suspensions completed the race with no sign of leakage or registered fatigue during the after-race inspection.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e180 SX | RPS13 | 1989-1993 | TC | SR20DET | I4\u003cbr\u003e180 SX | RPS13 | 1989-1993 | NA | SR20DE | I4\u003cbr\u003eSilvia | PS13 | 1991-1993 | TC | SR20DET | I4\u003cbr\u003eSilvia | PS13 | 1991-1993 | NA | SR20DE | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2023-08-20T13:07:30+08:00","created_at":"2023-08-20T12:31:48+08:00","vendor":"Rzcrew Racing","type":"Coilovers and Springs","tags":["180-sx-rps13-1989-1993-na-sr20de-i4","180-sx-rps13-1989-1993-tc-sr20det-i4","1989","1990","1991","1992","1993","coilovers-and-springs","dampening-and-height-adjustable","nissan","rzcrew-garage","rzcrew-racing","sg1","silvia-ps13-1991-1993-na-sr20de-i4","silvia-ps13-1991-1993-tc-sr20det-i4","ws110"],"price":109000,"price_min":109000,"price_max":125000,"available":true,"price_varies":true,"compare_at_price":109000,"compare_at_price_min":109000,"compare_at_price_max":125000,"compare_at_price_varies":true,"variants":[{"id":42348666880182,"title":"Reinforced Rubber Mount \/ Reinforced Rubber Mount","option1":"Reinforced Rubber Mount","option2":"Reinforced Rubber Mount","option3":null,"sku":"MT1GT-NI13-01","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan 180 SX PS13\/RPS13 - Reinforced Rubber Mount \/ Reinforced Rubber Mount","public_title":"Reinforced Rubber Mount \/ Reinforced Rubber Mount","options":["Reinforced Rubber Mount","Reinforced Rubber Mount"],"price":109000,"weight":25000,"compare_at_price":109000,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42348666912950,"title":"Reinforced Rubber Mount \/ Pillow Ball Mount","option1":"Reinforced Rubber Mount","option2":"Pillow Ball Mount","option3":null,"sku":"MT1GT-NI13-01-FM","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan 180 SX PS13\/RPS13 - Reinforced Rubber Mount \/ Pillow Ball Mount","public_title":"Reinforced Rubber Mount \/ Pillow Ball Mount","options":["Reinforced Rubber Mount","Pillow Ball Mount"],"price":119000,"weight":25000,"compare_at_price":119000,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42348666945718,"title":"Pillow Ball Mount \/ Reinforced Rubber Mount","option1":"Pillow Ball Mount","option2":"Reinforced Rubber Mount","option3":null,"sku":"MT1GT-NI13-01-RM","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan 180 SX PS13\/RPS13 - Pillow Ball Mount \/ Reinforced Rubber Mount","public_title":"Pillow Ball Mount \/ Reinforced Rubber Mount","options":["Pillow Ball Mount","Reinforced Rubber Mount"],"price":119000,"weight":25000,"compare_at_price":119000,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42348666978486,"title":"Pillow Ball Mount \/ Pillow Ball Mount","option1":"Pillow Ball Mount","option2":"Pillow Ball Mount","option3":null,"sku":"MT1GT-NI13-01-FM-RM","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan 180 SX PS13\/RPS13 - Pillow Ball Mount \/ Pillow Ball Mount","public_title":"Pillow Ball Mount \/ Pillow Ball Mount","options":["Pillow Ball Mount","Pillow Ball Mount"],"price":125000,"weight":25000,"compare_at_price":125000,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-180-sx-ps13rps13-rzcrew-1.jpg?v=1710315272","\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-180-sx-ps13rps13-rzcrew-2.jpg?v=1710315274","\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-180-sx-ps13rps13-rzcrew-3.jpg?v=1710315275","\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-180-sx-ps13rps13-rzcrew-4.jpg?v=1710315276","\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-180-sx-ps13rps13-rzcrew-5.jpg?v=1710315277"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-180-sx-ps13rps13-rzcrew-1.jpg?v=1710315272","options":["Front Top Mount","Rear Top Mount"],"media":[{"alt":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan 180 SX PS13\/RPS13 - RZCrewGarage","id":26512238149814,"position":1,"preview_image":{"aspect_ratio":1.328,"height":1379,"width":1832,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-180-sx-ps13rps13-rzcrew-1.jpg?v=1710315272"},"aspect_ratio":1.328,"height":1379,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-180-sx-ps13rps13-rzcrew-1.jpg?v=1710315272","width":1832},{"alt":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan 180 SX PS13\/RPS13 - RZCrewGarage","id":26512238182582,"position":2,"preview_image":{"aspect_ratio":1.329,"height":1429,"width":1899,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-180-sx-ps13rps13-rzcrew-2.jpg?v=1710315274"},"aspect_ratio":1.329,"height":1429,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-180-sx-ps13rps13-rzcrew-2.jpg?v=1710315274","width":1899},{"alt":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan 180 SX PS13\/RPS13 - RZCrewGarage","id":26512238215350,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1530,"width":2040,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-180-sx-ps13rps13-rzcrew-3.jpg?v=1710315275"},"aspect_ratio":1.333,"height":1530,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-180-sx-ps13rps13-rzcrew-3.jpg?v=1710315275","width":2040},{"alt":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan 180 SX PS13\/RPS13 - RZCrewGarage","id":26512238248118,"position":4,"preview_image":{"aspect_ratio":0.75,"height":1600,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-180-sx-ps13rps13-rzcrew-4.jpg?v=1710315276"},"aspect_ratio":0.75,"height":1600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-180-sx-ps13rps13-rzcrew-4.jpg?v=1710315276","width":1200},{"alt":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan 180 SX PS13\/RPS13 - RZCrewGarage","id":26512238280886,"position":5,"preview_image":{"aspect_ratio":1.509,"height":1060,"width":1600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-180-sx-ps13rps13-rzcrew-5.jpg?v=1710315277"},"aspect_ratio":1.509,"height":1060,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-180-sx-ps13rps13-rzcrew-5.jpg?v=1710315277","width":1600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003ePart Number: MT1GT-NI13-01\u003cbr\u003eFront Mounts: Reinforced Rubber Mount OR Pillow Ball\u003cbr\u003eRear Mounts: Reinforced Rubber Mount OR Pillow Ball\u003cbr\u003eSpring Rates:\u003cbr\u003eFront:8.7KG\/8KG\u003cbr\u003eRear: 6.5KG\/5KG\u003cbr\u003e\u003cbr\u003eRZCrew Racing GoTrack \"GT\" Series is a high-spec fast street\/race damper that focuses on performance and precise handling.\u003cbr\u003e\u003cbr\u003eUnlike traditional coilover kits that lower your car for general street driving, the GT kit provides a lowered ride and massively improved handling, thanks to higher spring rates and a redefined front \/ rear high speed balance.\u003cbr\u003eThe full body length adjustment and separate pre-load setting allow a lowered stance without sacrificing bump-stroke travel.\u003cbr\u003eIts inverted Monotube design allows for high precision driving and predictability.\u003cbr\u003e\nThe GoTrack Coilover kits feature 32-steps adjustable dampening for precise suspension tuning.\u003cbr\u003eThis suspension kit can be fully overhauled.\u003cbr\u003eWe learnt from other brands that downtime is never ideal for our customers, thus all our coilover kits carry a strict 1 year one-to-one strut replacement warranty in the case of any leak. Pillow ball are not included in the warranty yet replacement parts are avilable.\u003cbr\u003e\u003cbr\u003eOur GoTrack Coilover kits feature:\u003cbr\u003e\u003cbr\u003e- Inverted Monotube design for spirited driving and racing.\u003cbr\u003e- Full body length adjustment with separate spring pre-load to avoid bumpiness.\u003cbr\u003e- Fully treated aluminum body for strength and life span.\u003cbr\u003e- High quality Fush Silkolene oil for better damper temperature control and lower friction during hard cornering\u003cbr\u003e- Teflon springs seats to avoid squeaky noises.\u003cbr\u003e- 32 adjustement steps, for precise suspension tuning.\u003cbr\u003e- Free choice of spring rate depending on model.\u003cbr\u003e- 1 year one-to-one replacement strut on any leak.\u003cbr\u003e- The RZCrew Racing GT Monotube Coilovers are track-tested, and their reliability has been proven during the 2019 Sepang 1000km Race held in Malaysia. Our suspensions completed the race with no sign of leakage or registered fatigue during the after-race inspection.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e180 SX | RPS13 | 1989-1993 | TC | SR20DET | I4\u003cbr\u003e180 SX | RPS13 | 1989-1993 | NA | SR20DE | I4\u003cbr\u003eSilvia | PS13 | 1991-1993 | TC | SR20DET | I4\u003cbr\u003eSilvia | PS13 | 1991-1993 | NA | SR20DE | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":7646610358454,"title":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan Cefiro A31","handle":"rzcrew-racing-mt1gt-ni04-01","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003ePart Number: MT1GT-NI04-01\u003cbr\u003eFront Mounts: Reinforced Rubber Mount OR Pillow Ball\u003cbr\u003eRear Mounts: Reinforced Rubber Mount\u003cbr\u003eSpring Rates:\u003cbr\u003eFront:7.2KG\/14KG\u003cbr\u003eRear: 7.2KG\/12KG\u003cbr\u003e\u003cbr\u003eRZCrew Racing GoTrack \"GT\" Series is a high-spec fast street\/race damper that focuses on performance and precise handling.\u003cbr\u003e\u003cbr\u003eUnlike traditional coilover kits that lower your car for general street driving, the GT kit provides a lowered ride and massively improved handling, thanks to higher spring rates and a redefined front \/ rear high speed balance.\u003cbr\u003eThe full body length adjustment and separate pre-load setting allow a lowered stance without sacrificing bump-stroke travel.\u003cbr\u003eIts inverted Monotube design allows for high precision driving and predictability.\u003cbr\u003e\nThe GoTrack Coilover kits feature 32-steps adjustable dampening for precise suspension tuning.\u003cbr\u003eThis suspension kit can be fully overhauled.\u003cbr\u003eWe learnt from other brands that downtime is never ideal for our customers, thus all our coilover kits carry a strict 1 year one-to-one strut replacement warranty in the case of any leak. Pillow ball are not included in the warranty yet replacement parts are avilable.\u003cbr\u003e\u003cbr\u003eOur GoTrack Coilover kits feature:\u003cbr\u003e\u003cbr\u003e- Inverted Monotube design for spirited driving and racing.\u003cbr\u003e- Full body length adjustment with separate spring pre-load to avoid bumpiness.\u003cbr\u003e- Fully treated aluminum body for strength and life span.\u003cbr\u003e- High quality Fush Silkolene oil for better damper temperature control and lower friction during hard cornering\u003cbr\u003e- Teflon springs seats to avoid squeaky noises.\u003cbr\u003e- 32 adjustement steps, for precise suspension tuning.\u003cbr\u003e- Free choice of spring rate depending on model.\u003cbr\u003e- 1 year one-to-one replacement strut on any leak.\u003cbr\u003e- The RZCrew Racing GT Monotube Coilovers are track-tested, and their reliability has been proven during the 2019 Sepang 1000km Race held in Malaysia. Our suspensions completed the race with no sign of leakage or registered fatigue during the after-race inspection.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCefiro | A31 | 1988-1992 | NA | RB20E | I6\u003cbr\u003eCefiro | A31 | 1988-1992 | TC | RB20DET | I6\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2023-08-20T13:07:20+08:00","created_at":"2023-08-20T12:30:11+08:00","vendor":"Rzcrew Racing","type":"Coilovers and Springs","tags":["1988","1989","1990","1991","1992","cefiro-a31-1988-1992-na-rb20e-i6","cefiro-a31-1988-1992-tc-rb20det-i6","coilovers-and-springs","dampening-and-height-adjustable","nissan","rzcrew-garage","rzcrew-racing","sg1","ws110"],"price":109000,"price_min":109000,"price_max":119000,"available":true,"price_varies":true,"compare_at_price":109000,"compare_at_price_min":109000,"compare_at_price_max":119000,"compare_at_price_varies":true,"variants":[{"id":42348665405622,"title":"Reinforced Rubber Mount","option1":"Reinforced Rubber Mount","option2":null,"option3":null,"sku":"MT1GT-NI04-01","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan Cefiro A31 - Reinforced Rubber Mount","public_title":"Reinforced Rubber Mount","options":["Reinforced Rubber Mount"],"price":109000,"weight":25000,"compare_at_price":109000,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42348665438390,"title":"Pillow Ball Mount","option1":"Pillow Ball Mount","option2":null,"option3":null,"sku":"MT1GT-NI04-01-FM","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan Cefiro A31 - Pillow Ball Mount","public_title":"Pillow Ball Mount","options":["Pillow Ball Mount"],"price":119000,"weight":25000,"compare_at_price":119000,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-cefiro-a31-rzcrew-1.jpg?v=1710315300","\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-cefiro-a31-rzcrew-2.jpg?v=1710315302","\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-cefiro-a31-rzcrew-3.jpg?v=1710315303","\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-cefiro-a31-rzcrew-4.jpg?v=1710315304","\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-cefiro-a31-rzcrew-5.jpg?v=1710315306"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-cefiro-a31-rzcrew-1.jpg?v=1710315300","options":["Front Top Mount"],"media":[{"alt":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan Cefiro A31 - RZCrewGarage","id":26512230121654,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1530,"width":2040,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-cefiro-a31-rzcrew-1.jpg?v=1710315300"},"aspect_ratio":1.333,"height":1530,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-cefiro-a31-rzcrew-1.jpg?v=1710315300","width":2040},{"alt":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan Cefiro A31 - RZCrewGarage","id":26512230154422,"position":2,"preview_image":{"aspect_ratio":1.329,"height":1429,"width":1899,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-cefiro-a31-rzcrew-2.jpg?v=1710315302"},"aspect_ratio":1.329,"height":1429,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-cefiro-a31-rzcrew-2.jpg?v=1710315302","width":1899},{"alt":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan Cefiro A31 - RZCrewGarage","id":26512230187190,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1530,"width":2040,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-cefiro-a31-rzcrew-3.jpg?v=1710315303"},"aspect_ratio":1.333,"height":1530,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-cefiro-a31-rzcrew-3.jpg?v=1710315303","width":2040},{"alt":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan Cefiro A31 - RZCrewGarage","id":26512230219958,"position":4,"preview_image":{"aspect_ratio":0.75,"height":1600,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-cefiro-a31-rzcrew-4.jpg?v=1710315304"},"aspect_ratio":0.75,"height":1600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-cefiro-a31-rzcrew-4.jpg?v=1710315304","width":1200},{"alt":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan Cefiro A31 - RZCrewGarage","id":26512230252726,"position":5,"preview_image":{"aspect_ratio":1.509,"height":1060,"width":1600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-cefiro-a31-rzcrew-5.jpg?v=1710315306"},"aspect_ratio":1.509,"height":1060,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-cefiro-a31-rzcrew-5.jpg?v=1710315306","width":1600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003ePart Number: MT1GT-NI04-01\u003cbr\u003eFront Mounts: Reinforced Rubber Mount OR Pillow Ball\u003cbr\u003eRear Mounts: Reinforced Rubber Mount\u003cbr\u003eSpring Rates:\u003cbr\u003eFront:7.2KG\/14KG\u003cbr\u003eRear: 7.2KG\/12KG\u003cbr\u003e\u003cbr\u003eRZCrew Racing GoTrack \"GT\" Series is a high-spec fast street\/race damper that focuses on performance and precise handling.\u003cbr\u003e\u003cbr\u003eUnlike traditional coilover kits that lower your car for general street driving, the GT kit provides a lowered ride and massively improved handling, thanks to higher spring rates and a redefined front \/ rear high speed balance.\u003cbr\u003eThe full body length adjustment and separate pre-load setting allow a lowered stance without sacrificing bump-stroke travel.\u003cbr\u003eIts inverted Monotube design allows for high precision driving and predictability.\u003cbr\u003e\nThe GoTrack Coilover kits feature 32-steps adjustable dampening for precise suspension tuning.\u003cbr\u003eThis suspension kit can be fully overhauled.\u003cbr\u003eWe learnt from other brands that downtime is never ideal for our customers, thus all our coilover kits carry a strict 1 year one-to-one strut replacement warranty in the case of any leak. Pillow ball are not included in the warranty yet replacement parts are avilable.\u003cbr\u003e\u003cbr\u003eOur GoTrack Coilover kits feature:\u003cbr\u003e\u003cbr\u003e- Inverted Monotube design for spirited driving and racing.\u003cbr\u003e- Full body length adjustment with separate spring pre-load to avoid bumpiness.\u003cbr\u003e- Fully treated aluminum body for strength and life span.\u003cbr\u003e- High quality Fush Silkolene oil for better damper temperature control and lower friction during hard cornering\u003cbr\u003e- Teflon springs seats to avoid squeaky noises.\u003cbr\u003e- 32 adjustement steps, for precise suspension tuning.\u003cbr\u003e- Free choice of spring rate depending on model.\u003cbr\u003e- 1 year one-to-one replacement strut on any leak.\u003cbr\u003e- The RZCrew Racing GT Monotube Coilovers are track-tested, and their reliability has been proven during the 2019 Sepang 1000km Race held in Malaysia. Our suspensions completed the race with no sign of leakage or registered fatigue during the after-race inspection.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCefiro | A31 | 1988-1992 | NA | RB20E | I6\u003cbr\u003eCefiro | A31 | 1988-1992 | TC | RB20DET | I6\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":7646607409334,"title":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan March K11","handle":"rzcrew-racing-mt1gt-ni01-01","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003ePart Number: MT1GT-NI01-01\u003cbr\u003eFront Mounts: Reinforced Rubber Mount OR Pillow Ball\u003cbr\u003eRear Mounts: Reinforced Rubber Mount\u003cbr\u003eSpring Rates:\u003cbr\u003eFront:5KG\u003cbr\u003eRear: 3KG\u003cbr\u003e\u003cbr\u003eRZCrew Racing GoTrack \"GT\" Series is a high-spec fast street\/race damper that focuses on performance and precise handling.\u003cbr\u003e\u003cbr\u003eUnlike traditional coilover kits that lower your car for general street driving, the GT kit provides a lowered ride and massively improved handling, thanks to higher spring rates and a redefined front \/ rear high speed balance.\u003cbr\u003eThe full body length adjustment and separate pre-load setting allow a lowered stance without sacrificing bump-stroke travel.\u003cbr\u003eIts inverted Monotube design allows for high precision driving and predictability.\u003cbr\u003e\nThe GoTrack Coilover kits feature 32-steps adjustable dampening for precise suspension tuning.\u003cbr\u003eThis suspension kit can be fully overhauled.\u003cbr\u003eWe learnt from other brands that downtime is never ideal for our customers, thus all our coilover kits carry a strict 1 year one-to-one strut replacement warranty in the case of any leak. Pillow ball are not included in the warranty yet replacement parts are avilable.\u003cbr\u003e\u003cbr\u003eOur GoTrack Coilover kits feature:\u003cbr\u003e\u003cbr\u003e- Inverted Monotube design for spirited driving and racing.\u003cbr\u003e- Full body length adjustment with separate spring pre-load to avoid bumpiness.\u003cbr\u003e- Fully treated aluminum body for strength and life span.\u003cbr\u003e- High quality Fush Silkolene oil for better damper temperature control and lower friction during hard cornering\u003cbr\u003e- Teflon springs seats to avoid squeaky noises.\u003cbr\u003e- 32 adjustement steps, for precise suspension tuning.\u003cbr\u003e- Free choice of spring rate depending on model.\u003cbr\u003e- 1 year one-to-one replacement strut on any leak.\u003cbr\u003e- The RZCrew Racing GT Monotube Coilovers are track-tested, and their reliability has been proven during the 2019 Sepang 1000km Race held in Malaysia. Our suspensions completed the race with no sign of leakage or registered fatigue during the after-race inspection.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMarch | K11 | 1992-1995 | NA | CG10DE | I4\u003cbr\u003eMarch | K11 | 1995-1997 | NA | CG10DE | I4\u003cbr\u003eMarch | K11 | 1997-1999 | NA | CG10DE | I4\u003cbr\u003eMarch | K11 | 1999-2002 | NA | CG10DE | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2023-08-20T13:07:01+08:00","created_at":"2023-08-20T12:27:27+08:00","vendor":"Rzcrew Racing","type":"Coilovers and Springs","tags":["1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","coilovers-and-springs","dampening-and-height-adjustable","march-k11-1992-1995-na-cg10de-i4","march-k11-1995-1997-na-cg10de-i4","march-k11-1997-1999-na-cg10de-i4","march-k11-1999-2002-na-cg10de-i4","nissan","rzcrew-garage","rzcrew-racing","sg1","ws110"],"price":109000,"price_min":109000,"price_max":119000,"available":true,"price_varies":true,"compare_at_price":109000,"compare_at_price_min":109000,"compare_at_price_max":119000,"compare_at_price_varies":true,"variants":[{"id":42348661702838,"title":"Reinforced Rubber Mount","option1":"Reinforced Rubber Mount","option2":null,"option3":null,"sku":"MT1GT-NI01-01","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan March K11 - Reinforced Rubber Mount","public_title":"Reinforced Rubber Mount","options":["Reinforced Rubber Mount"],"price":109000,"weight":25000,"compare_at_price":109000,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42348661735606,"title":"Pillow Ball Mount","option1":"Pillow Ball Mount","option2":null,"option3":null,"sku":"MT1GT-NI01-01-FM","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan March K11 - Pillow Ball Mount","public_title":"Pillow Ball Mount","options":["Pillow Ball Mount"],"price":119000,"weight":25000,"compare_at_price":119000,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-march-k11-rzcrew-1.jpg?v=1710315359","\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-march-k11-rzcrew-2.jpg?v=1710315360","\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-march-k11-rzcrew-3.jpg?v=1710315361","\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-march-k11-rzcrew-4.jpg?v=1710315363","\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-march-k11-rzcrew-5.jpg?v=1710315364"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-march-k11-rzcrew-1.jpg?v=1710315359","options":["Front Top Mount"],"media":[{"alt":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan March K11 - RZCrewGarage","id":26512214851766,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1530,"width":2040,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-march-k11-rzcrew-1.jpg?v=1710315359"},"aspect_ratio":1.333,"height":1530,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-march-k11-rzcrew-1.jpg?v=1710315359","width":2040},{"alt":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan March K11 - RZCrewGarage","id":26512214884534,"position":2,"preview_image":{"aspect_ratio":1.329,"height":1429,"width":1899,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-march-k11-rzcrew-2.jpg?v=1710315360"},"aspect_ratio":1.329,"height":1429,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-march-k11-rzcrew-2.jpg?v=1710315360","width":1899},{"alt":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan March K11 - RZCrewGarage","id":26512214917302,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1530,"width":2040,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-march-k11-rzcrew-3.jpg?v=1710315361"},"aspect_ratio":1.333,"height":1530,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-march-k11-rzcrew-3.jpg?v=1710315361","width":2040},{"alt":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan March K11 - RZCrewGarage","id":26512214950070,"position":4,"preview_image":{"aspect_ratio":0.75,"height":1600,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-march-k11-rzcrew-4.jpg?v=1710315363"},"aspect_ratio":0.75,"height":1600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-march-k11-rzcrew-4.jpg?v=1710315363","width":1200},{"alt":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan March K11 - RZCrewGarage","id":26512214982838,"position":5,"preview_image":{"aspect_ratio":1.509,"height":1060,"width":1600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-march-k11-rzcrew-5.jpg?v=1710315364"},"aspect_ratio":1.509,"height":1060,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-march-k11-rzcrew-5.jpg?v=1710315364","width":1600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003ePart Number: MT1GT-NI01-01\u003cbr\u003eFront Mounts: Reinforced Rubber Mount OR Pillow Ball\u003cbr\u003eRear Mounts: Reinforced Rubber Mount\u003cbr\u003eSpring Rates:\u003cbr\u003eFront:5KG\u003cbr\u003eRear: 3KG\u003cbr\u003e\u003cbr\u003eRZCrew Racing GoTrack \"GT\" Series is a high-spec fast street\/race damper that focuses on performance and precise handling.\u003cbr\u003e\u003cbr\u003eUnlike traditional coilover kits that lower your car for general street driving, the GT kit provides a lowered ride and massively improved handling, thanks to higher spring rates and a redefined front \/ rear high speed balance.\u003cbr\u003eThe full body length adjustment and separate pre-load setting allow a lowered stance without sacrificing bump-stroke travel.\u003cbr\u003eIts inverted Monotube design allows for high precision driving and predictability.\u003cbr\u003e\nThe GoTrack Coilover kits feature 32-steps adjustable dampening for precise suspension tuning.\u003cbr\u003eThis suspension kit can be fully overhauled.\u003cbr\u003eWe learnt from other brands that downtime is never ideal for our customers, thus all our coilover kits carry a strict 1 year one-to-one strut replacement warranty in the case of any leak. Pillow ball are not included in the warranty yet replacement parts are avilable.\u003cbr\u003e\u003cbr\u003eOur GoTrack Coilover kits feature:\u003cbr\u003e\u003cbr\u003e- Inverted Monotube design for spirited driving and racing.\u003cbr\u003e- Full body length adjustment with separate spring pre-load to avoid bumpiness.\u003cbr\u003e- Fully treated aluminum body for strength and life span.\u003cbr\u003e- High quality Fush Silkolene oil for better damper temperature control and lower friction during hard cornering\u003cbr\u003e- Teflon springs seats to avoid squeaky noises.\u003cbr\u003e- 32 adjustement steps, for precise suspension tuning.\u003cbr\u003e- Free choice of spring rate depending on model.\u003cbr\u003e- 1 year one-to-one replacement strut on any leak.\u003cbr\u003e- The RZCrew Racing GT Monotube Coilovers are track-tested, and their reliability has been proven during the 2019 Sepang 1000km Race held in Malaysia. Our suspensions completed the race with no sign of leakage or registered fatigue during the after-race inspection.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMarch | K11 | 1992-1995 | NA | CG10DE | I4\u003cbr\u003eMarch | K11 | 1995-1997 | NA | CG10DE | I4\u003cbr\u003eMarch | K11 | 1997-1999 | NA | CG10DE | I4\u003cbr\u003eMarch | K11 | 1999-2002 | NA | CG10DE | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":7646610325686,"title":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan Pulsar N14","handle":"rzcrew-racing-mt1gt-ni16-01","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003ePart Number: MT1GT-NI16-01\u003cbr\u003eFront Mounts: Reinforced Rubber Mount OR Pillow Ball\u003cbr\u003eRear Mounts: Reinforced Rubber Mount\u003cbr\u003eSpring Rates:\u003cbr\u003eFront:6.6KG\u003cbr\u003eRear: 4.4KG\u003cbr\u003e\u003cbr\u003eRZCrew Racing GoTrack \"GT\" Series is a high-spec fast street\/race damper that focuses on performance and precise handling.\u003cbr\u003e\u003cbr\u003eUnlike traditional coilover kits that lower your car for general street driving, the GT kit provides a lowered ride and massively improved handling, thanks to higher spring rates and a redefined front \/ rear high speed balance.\u003cbr\u003eThe full body length adjustment and separate pre-load setting allow a lowered stance without sacrificing bump-stroke travel.\u003cbr\u003eIts inverted Monotube design allows for high precision driving and predictability.\u003cbr\u003e\nThe GoTrack Coilover kits feature 32-steps adjustable dampening for precise suspension tuning.\u003cbr\u003eThis suspension kit can be fully overhauled.\u003cbr\u003eWe learnt from other brands that downtime is never ideal for our customers, thus all our coilover kits carry a strict 1 year one-to-one strut replacement warranty in the case of any leak. Pillow ball are not included in the warranty yet replacement parts are avilable.\u003cbr\u003e\u003cbr\u003eOur GoTrack Coilover kits feature:\u003cbr\u003e\u003cbr\u003e- Inverted Monotube design for spirited driving and racing.\u003cbr\u003e- Full body length adjustment with separate spring pre-load to avoid bumpiness.\u003cbr\u003e- Fully treated aluminum body for strength and life span.\u003cbr\u003e- High quality Fush Silkolene oil for better damper temperature control and lower friction during hard cornering\u003cbr\u003e- Teflon springs seats to avoid squeaky noises.\u003cbr\u003e- 32 adjustement steps, for precise suspension tuning.\u003cbr\u003e- Free choice of spring rate depending on model.\u003cbr\u003e- 1 year one-to-one replacement strut on any leak.\u003cbr\u003e- The RZCrew Racing GT Monotube Coilovers are track-tested, and their reliability has been proven during the 2019 Sepang 1000km Race held in Malaysia. Our suspensions completed the race with no sign of leakage or registered fatigue during the after-race inspection.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003ePulsar | RNN14 Zenki | 1990-1992 | TC | SR20DET | I4\u003cbr\u003ePulsar | RNN14 Kouki | 1992-1995 | TC | SR20DET | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2023-08-20T13:07:21+08:00","created_at":"2023-08-20T12:30:05+08:00","vendor":"Rzcrew Racing","type":"Coilovers and Springs","tags":["1990","1991","1992","1993","1994","1995","coilovers-and-springs","dampening-and-height-adjustable","nissan","pulsar-rnn14-kouki-1992-1995-tc-sr20det-i4","pulsar-rnn14-zenki-1990-1992-tc-sr20det-i4","rzcrew-garage","rzcrew-racing","sg1","ws110"],"price":109000,"price_min":109000,"price_max":119000,"available":true,"price_varies":true,"compare_at_price":109000,"compare_at_price_min":109000,"compare_at_price_max":119000,"compare_at_price_varies":true,"variants":[{"id":42348665340086,"title":"Reinforced Rubber Mount","option1":"Reinforced Rubber Mount","option2":null,"option3":null,"sku":"MT1GT-NI16-01","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan Pulsar N14 - Reinforced Rubber Mount","public_title":"Reinforced Rubber Mount","options":["Reinforced Rubber Mount"],"price":109000,"weight":25000,"compare_at_price":109000,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42348665372854,"title":"Pillow Ball Mount","option1":"Pillow Ball Mount","option2":null,"option3":null,"sku":"MT1GT-NI16-01-FM","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan Pulsar N14 - Pillow Ball Mount","public_title":"Pillow Ball Mount","options":["Pillow Ball Mount"],"price":119000,"weight":25000,"compare_at_price":119000,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-pulsar-n14-rzcrew-1.jpg?v=1710315301","\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-pulsar-n14-rzcrew-2.jpg?v=1710315302","\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-pulsar-n14-rzcrew-3.jpg?v=1710315303","\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-pulsar-n14-rzcrew-4.jpg?v=1710315304","\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-pulsar-n14-rzcrew-5.jpg?v=1710315305"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-pulsar-n14-rzcrew-1.jpg?v=1710315301","options":["Front Top Mount"],"media":[{"alt":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan Pulsar N14 - RZCrewGarage","id":26512229793974,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1530,"width":2040,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-pulsar-n14-rzcrew-1.jpg?v=1710315301"},"aspect_ratio":1.333,"height":1530,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-pulsar-n14-rzcrew-1.jpg?v=1710315301","width":2040},{"alt":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan Pulsar N14 - RZCrewGarage","id":26512229826742,"position":2,"preview_image":{"aspect_ratio":1.329,"height":1429,"width":1899,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-pulsar-n14-rzcrew-2.jpg?v=1710315302"},"aspect_ratio":1.329,"height":1429,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-pulsar-n14-rzcrew-2.jpg?v=1710315302","width":1899},{"alt":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan Pulsar N14 - RZCrewGarage","id":26512229859510,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1530,"width":2040,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-pulsar-n14-rzcrew-3.jpg?v=1710315303"},"aspect_ratio":1.333,"height":1530,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-pulsar-n14-rzcrew-3.jpg?v=1710315303","width":2040},{"alt":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan Pulsar N14 - RZCrewGarage","id":26512229892278,"position":4,"preview_image":{"aspect_ratio":0.75,"height":1600,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-pulsar-n14-rzcrew-4.jpg?v=1710315304"},"aspect_ratio":0.75,"height":1600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-pulsar-n14-rzcrew-4.jpg?v=1710315304","width":1200},{"alt":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan Pulsar N14 - RZCrewGarage","id":26512229925046,"position":5,"preview_image":{"aspect_ratio":1.509,"height":1060,"width":1600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-pulsar-n14-rzcrew-5.jpg?v=1710315305"},"aspect_ratio":1.509,"height":1060,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-pulsar-n14-rzcrew-5.jpg?v=1710315305","width":1600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003ePart Number: MT1GT-NI16-01\u003cbr\u003eFront Mounts: Reinforced Rubber Mount OR Pillow Ball\u003cbr\u003eRear Mounts: Reinforced Rubber Mount\u003cbr\u003eSpring Rates:\u003cbr\u003eFront:6.6KG\u003cbr\u003eRear: 4.4KG\u003cbr\u003e\u003cbr\u003eRZCrew Racing GoTrack \"GT\" Series is a high-spec fast street\/race damper that focuses on performance and precise handling.\u003cbr\u003e\u003cbr\u003eUnlike traditional coilover kits that lower your car for general street driving, the GT kit provides a lowered ride and massively improved handling, thanks to higher spring rates and a redefined front \/ rear high speed balance.\u003cbr\u003eThe full body length adjustment and separate pre-load setting allow a lowered stance without sacrificing bump-stroke travel.\u003cbr\u003eIts inverted Monotube design allows for high precision driving and predictability.\u003cbr\u003e\nThe GoTrack Coilover kits feature 32-steps adjustable dampening for precise suspension tuning.\u003cbr\u003eThis suspension kit can be fully overhauled.\u003cbr\u003eWe learnt from other brands that downtime is never ideal for our customers, thus all our coilover kits carry a strict 1 year one-to-one strut replacement warranty in the case of any leak. Pillow ball are not included in the warranty yet replacement parts are avilable.\u003cbr\u003e\u003cbr\u003eOur GoTrack Coilover kits feature:\u003cbr\u003e\u003cbr\u003e- Inverted Monotube design for spirited driving and racing.\u003cbr\u003e- Full body length adjustment with separate spring pre-load to avoid bumpiness.\u003cbr\u003e- Fully treated aluminum body for strength and life span.\u003cbr\u003e- High quality Fush Silkolene oil for better damper temperature control and lower friction during hard cornering\u003cbr\u003e- Teflon springs seats to avoid squeaky noises.\u003cbr\u003e- 32 adjustement steps, for precise suspension tuning.\u003cbr\u003e- Free choice of spring rate depending on model.\u003cbr\u003e- 1 year one-to-one replacement strut on any leak.\u003cbr\u003e- The RZCrew Racing GT Monotube Coilovers are track-tested, and their reliability has been proven during the 2019 Sepang 1000km Race held in Malaysia. Our suspensions completed the race with no sign of leakage or registered fatigue during the after-race inspection.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003ePulsar | RNN14 Zenki | 1990-1992 | TC | SR20DET | I4\u003cbr\u003ePulsar | RNN14 Kouki | 1992-1995 | TC | SR20DET | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":7646611275958,"title":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan Silvia S13 All","handle":"rzcrew-racing-mt1gt-ni13-01-s13-all","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003ePart Number: MT1GT-NI13-01\u003cbr\u003eFront Mounts: Reinforced Rubber Mount OR Pillow Ball\u003cbr\u003eRear Mounts: Reinforced Rubber Mount OR Pillow Ball\u003cbr\u003eSpring Rates:\u003cbr\u003eFront:8.7KG\/8KG\u003cbr\u003eRear: 6.5KG\/5KG\u003cbr\u003e\u003cbr\u003eRZCrew Racing GoTrack \"GT\" Series is a high-spec fast street\/race damper that focuses on performance and precise handling.\u003cbr\u003e\u003cbr\u003eUnlike traditional coilover kits that lower your car for general street driving, the GT kit provides a lowered ride and massively improved handling, thanks to higher spring rates and a redefined front \/ rear high speed balance.\u003cbr\u003eThe full body length adjustment and separate pre-load setting allow a lowered stance without sacrificing bump-stroke travel.\u003cbr\u003eIts inverted Monotube design allows for high precision driving and predictability.\u003cbr\u003e\nThe GoTrack Coilover kits feature 32-steps adjustable dampening for precise suspension tuning.\u003cbr\u003eThis suspension kit can be fully overhauled.\u003cbr\u003eWe learnt from other brands that downtime is never ideal for our customers, thus all our coilover kits carry a strict 1 year one-to-one strut replacement warranty in the case of any leak. Pillow ball are not included in the warranty yet replacement parts are avilable.\u003cbr\u003e\u003cbr\u003eOur GoTrack Coilover kits feature:\u003cbr\u003e\u003cbr\u003e- Inverted Monotube design for spirited driving and racing.\u003cbr\u003e- Full body length adjustment with separate spring pre-load to avoid bumpiness.\u003cbr\u003e- Fully treated aluminum body for strength and life span.\u003cbr\u003e- High quality Fush Silkolene oil for better damper temperature control and lower friction during hard cornering\u003cbr\u003e- Teflon springs seats to avoid squeaky noises.\u003cbr\u003e- 32 adjustement steps, for precise suspension tuning.\u003cbr\u003e- Free choice of spring rate depending on model.\u003cbr\u003e- 1 year one-to-one replacement strut on any leak.\u003cbr\u003e- The RZCrew Racing GT Monotube Coilovers are track-tested, and their reliability has been proven during the 2019 Sepang 1000km Race held in Malaysia. Our suspensions completed the race with no sign of leakage or registered fatigue during the after-race inspection.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S13 | 1988-1991 | TC | CA18DET | I4\u003cbr\u003eSilvia | S13 | 1988-1993 | NA | CA18DE | I4\u003cbr\u003e180 SX | RS13 | 1989-1993 | TC | CA18DET | I4\u003cbr\u003e180 SX | RS13 | 1989-1993 | NA | CA18DE | I4\u003cbr\u003e180 SX | RPS13 | 1989-1993 | TC | SR20DET | I4\u003cbr\u003e180 SX | RPS13 | 1989-1993 | NA | SR20DE | I4\u003cbr\u003eSilvia | PS13 | 1991-1993 | TC | SR20DET | I4\u003cbr\u003eSilvia | PS13 | 1991-1993 | NA | SR20DE | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2023-08-20T13:07:23+08:00","created_at":"2023-08-20T12:31:43+08:00","vendor":"Rzcrew Racing","type":"Coilovers and Springs","tags":["180-sx-rps13-1989-1993-na-sr20de-i4","180-sx-rps13-1989-1993-tc-sr20det-i4","180-sx-rs13-1989-1993-na-ca18de-i4","180-sx-rs13-1989-1993-tc-ca18det-i4","1988","1989","1990","1991","1992","1993","coilovers-and-springs","dampening-and-height-adjustable","nissan","rzcrew-garage","rzcrew-racing","sg1","silvia-ps13-1991-1993-na-sr20de-i4","silvia-ps13-1991-1993-tc-sr20det-i4","silvia-s13-1988-1991-tc-ca18det-i4","silvia-s13-1988-1993-na-ca18de-i4","ws110"],"price":109000,"price_min":109000,"price_max":125000,"available":true,"price_varies":true,"compare_at_price":109000,"compare_at_price_min":109000,"compare_at_price_max":125000,"compare_at_price_varies":true,"variants":[{"id":42348666749110,"title":"Reinforced Rubber Mount \/ Reinforced Rubber Mount","option1":"Reinforced Rubber Mount","option2":"Reinforced Rubber Mount","option3":null,"sku":"MT1GT-NI13-01","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan Silvia S13 All - Reinforced Rubber Mount \/ Reinforced Rubber Mount","public_title":"Reinforced Rubber Mount \/ Reinforced Rubber Mount","options":["Reinforced Rubber Mount","Reinforced Rubber Mount"],"price":109000,"weight":25000,"compare_at_price":109000,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42348666781878,"title":"Reinforced Rubber Mount \/ Pillow Ball Mount","option1":"Reinforced Rubber Mount","option2":"Pillow Ball Mount","option3":null,"sku":"MT1GT-NI13-01-FM","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan Silvia S13 All - Reinforced Rubber Mount \/ Pillow Ball Mount","public_title":"Reinforced Rubber Mount \/ Pillow Ball Mount","options":["Reinforced Rubber Mount","Pillow Ball Mount"],"price":119000,"weight":25000,"compare_at_price":119000,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42348666814646,"title":"Pillow Ball Mount \/ Reinforced Rubber Mount","option1":"Pillow Ball Mount","option2":"Reinforced Rubber Mount","option3":null,"sku":"MT1GT-NI13-01-RM","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan Silvia S13 All - Pillow Ball Mount \/ Reinforced Rubber Mount","public_title":"Pillow Ball Mount \/ Reinforced Rubber Mount","options":["Pillow Ball Mount","Reinforced Rubber Mount"],"price":119000,"weight":25000,"compare_at_price":119000,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42348666847414,"title":"Pillow Ball Mount \/ Pillow Ball Mount","option1":"Pillow Ball Mount","option2":"Pillow Ball Mount","option3":null,"sku":"MT1GT-NI13-01-FM-RM","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan Silvia S13 All - Pillow Ball Mount \/ Pillow Ball Mount","public_title":"Pillow Ball Mount \/ Pillow Ball Mount","options":["Pillow Ball Mount","Pillow Ball Mount"],"price":125000,"weight":25000,"compare_at_price":125000,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-silvia-s13-all-rzcrew-1.jpg?v=1710315273","\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-silvia-s13-all-rzcrew-2.jpg?v=1710315274","\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-silvia-s13-all-rzcrew-3.jpg?v=1710315275","\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-silvia-s13-all-rzcrew-4.jpg?v=1710315276","\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-silvia-s13-all-rzcrew-5.jpg?v=1710315278"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-silvia-s13-all-rzcrew-1.jpg?v=1710315273","options":["Front Top Mount","Rear Top Mount"],"media":[{"alt":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan Silvia S13 All - RZCrewGarage","id":26512237985974,"position":1,"preview_image":{"aspect_ratio":1.328,"height":1379,"width":1832,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-silvia-s13-all-rzcrew-1.jpg?v=1710315273"},"aspect_ratio":1.328,"height":1379,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-silvia-s13-all-rzcrew-1.jpg?v=1710315273","width":1832},{"alt":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan Silvia S13 All - RZCrewGarage","id":26512238018742,"position":2,"preview_image":{"aspect_ratio":1.329,"height":1429,"width":1899,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-silvia-s13-all-rzcrew-2.jpg?v=1710315274"},"aspect_ratio":1.329,"height":1429,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-silvia-s13-all-rzcrew-2.jpg?v=1710315274","width":1899},{"alt":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan Silvia S13 All - RZCrewGarage","id":26512238051510,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1530,"width":2040,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-silvia-s13-all-rzcrew-3.jpg?v=1710315275"},"aspect_ratio":1.333,"height":1530,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-silvia-s13-all-rzcrew-3.jpg?v=1710315275","width":2040},{"alt":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan Silvia S13 All - RZCrewGarage","id":26512238084278,"position":4,"preview_image":{"aspect_ratio":0.75,"height":1600,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-silvia-s13-all-rzcrew-4.jpg?v=1710315276"},"aspect_ratio":0.75,"height":1600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-silvia-s13-all-rzcrew-4.jpg?v=1710315276","width":1200},{"alt":"Rzcrew Racing - GoTrack \"GT\" Monotube Pillow ball mount Coilover Kit - Nissan Silvia S13 All - RZCrewGarage","id":26512238117046,"position":5,"preview_image":{"aspect_ratio":1.509,"height":1060,"width":1600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-silvia-s13-all-rzcrew-5.jpg?v=1710315278"},"aspect_ratio":1.509,"height":1060,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-pillow-ball-mount-coilover-kit-nissan-silvia-s13-all-rzcrew-5.jpg?v=1710315278","width":1600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003ePart Number: MT1GT-NI13-01\u003cbr\u003eFront Mounts: Reinforced Rubber Mount OR Pillow Ball\u003cbr\u003eRear Mounts: Reinforced Rubber Mount OR Pillow Ball\u003cbr\u003eSpring Rates:\u003cbr\u003eFront:8.7KG\/8KG\u003cbr\u003eRear: 6.5KG\/5KG\u003cbr\u003e\u003cbr\u003eRZCrew Racing GoTrack \"GT\" Series is a high-spec fast street\/race damper that focuses on performance and precise handling.\u003cbr\u003e\u003cbr\u003eUnlike traditional coilover kits that lower your car for general street driving, the GT kit provides a lowered ride and massively improved handling, thanks to higher spring rates and a redefined front \/ rear high speed balance.\u003cbr\u003eThe full body length adjustment and separate pre-load setting allow a lowered stance without sacrificing bump-stroke travel.\u003cbr\u003eIts inverted Monotube design allows for high precision driving and predictability.\u003cbr\u003e\nThe GoTrack Coilover kits feature 32-steps adjustable dampening for precise suspension tuning.\u003cbr\u003eThis suspension kit can be fully overhauled.\u003cbr\u003eWe learnt from other brands that downtime is never ideal for our customers, thus all our coilover kits carry a strict 1 year one-to-one strut replacement warranty in the case of any leak. Pillow ball are not included in the warranty yet replacement parts are avilable.\u003cbr\u003e\u003cbr\u003eOur GoTrack Coilover kits feature:\u003cbr\u003e\u003cbr\u003e- Inverted Monotube design for spirited driving and racing.\u003cbr\u003e- Full body length adjustment with separate spring pre-load to avoid bumpiness.\u003cbr\u003e- Fully treated aluminum body for strength and life span.\u003cbr\u003e- High quality Fush Silkolene oil for better damper temperature control and lower friction during hard cornering\u003cbr\u003e- Teflon springs seats to avoid squeaky noises.\u003cbr\u003e- 32 adjustement steps, for precise suspension tuning.\u003cbr\u003e- Free choice of spring rate depending on model.\u003cbr\u003e- 1 year one-to-one replacement strut on any leak.\u003cbr\u003e- The RZCrew Racing GT Monotube Coilovers are track-tested, and their reliability has been proven during the 2019 Sepang 1000km Race held in Malaysia. Our suspensions completed the race with no sign of leakage or registered fatigue during the after-race inspection.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S13 | 1988-1991 | TC | CA18DET | I4\u003cbr\u003eSilvia | S13 | 1988-1993 | NA | CA18DE | I4\u003cbr\u003e180 SX | RS13 | 1989-1993 | TC | CA18DET | I4\u003cbr\u003e180 SX | RS13 | 1989-1993 | NA | CA18DE | I4\u003cbr\u003e180 SX | RPS13 | 1989-1993 | TC | SR20DET | I4\u003cbr\u003e180 SX | RPS13 | 1989-1993 | NA | SR20DE | I4\u003cbr\u003eSilvia | PS13 | 1991-1993 | TC | SR20DET | I4\u003cbr\u003eSilvia | PS13 | 1991-1993 | NA | SR20DE | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":6039351918774,"title":"Rzcrew Racing Vaccum Manifold - Universal","handle":"rzcrew-racing-vaccum-manifold-universal","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003eReference Number: RZ-VM-SC\u003cbr\u003eIntake Type: Vaccum LineIf you are Installing ITB or a Forced induction system on your car, you may need more vaccum sources. This item is perfect for those who needs to gather more vaccum lines. This kit includes:\u003cbr\u003e- 1x Vaccum Manifold Unit with 6x 1\/8NPT holes and 1x 1\/4NPT hole.\u003cbr\u003e-All neccessary fitting and plugs.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e","published_at":"2020-11-04T17:11:23+08:00","created_at":"2020-11-04T17:11:25+08:00","vendor":"Rzcrew Racing","type":"Individual Throttle Bodies","tags":["0","1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","alfa-romeo","aston martin","audi","bmw","bmw-mini","chevrolet","citroen","daihatsu","ferrari","fiat","ford","honda","hyundai","individual-throttle-bodies","intake","kia","lexus","lotus","mazda","mercedes-benz","mitsubishi","nissan","opel","peugeot","porsche","renault","rzcrew-garage","rzcrew-racing","seat","sg1","skoda","subaru","suzuki","toyota","volkswagen","volvo","ws130"],"price":5610,"price_min":5610,"price_max":7360,"available":true,"price_varies":true,"compare_at_price":6100,"compare_at_price_min":6100,"compare_at_price_max":8000,"compare_at_price_varies":true,"variants":[{"id":37414277218486,"title":"Raw (Silver)","option1":"Raw (Silver)","option2":null,"option3":null,"sku":"RZ-VM-SC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Vaccum Manifold - Universal - Raw (Silver)","public_title":"Raw (Silver)","options":["Raw (Silver)"],"price":5610,"weight":1000,"compare_at_price":6100,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":37414277251254,"title":"Other Colour","option1":"Other Colour","option2":null,"option3":null,"sku":"RZ-VM-CS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Vaccum Manifold - Universal - Other Colour","public_title":"Other Colour","options":["Other Colour"],"price":7360,"weight":1000,"compare_at_price":8000,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/RZ-VM-SC_78a3d32f-cfc8-486b-b228-0408321fcb5f.jpg?v=1710194459","\/\/rzcrewgarage.com\/cdn\/shop\/products\/Anodisation_0999062e-757f-46d6-b4ac-88dba2fdd3d8.jpg?v=1710194462"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/RZ-VM-SC_78a3d32f-cfc8-486b-b228-0408321fcb5f.jpg?v=1710194459","options":["Anodisation Colour"],"media":[{"alt":"Rzcrew Racing Vaccum Manifold - Universal","id":22741569994934,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1212,"width":1212,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/RZ-VM-SC_78a3d32f-cfc8-486b-b228-0408321fcb5f.jpg?v=1710194459"},"aspect_ratio":1.0,"height":1212,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/RZ-VM-SC_78a3d32f-cfc8-486b-b228-0408321fcb5f.jpg?v=1710194459","width":1212},{"alt":"Rzcrew Racing Vaccum Manifold - Universal","id":22741570027702,"position":2,"preview_image":{"aspect_ratio":1.0,"height":927,"width":927,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Anodisation_0999062e-757f-46d6-b4ac-88dba2fdd3d8.jpg?v=1710194462"},"aspect_ratio":1.0,"height":927,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Anodisation_0999062e-757f-46d6-b4ac-88dba2fdd3d8.jpg?v=1710194462","width":927}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003eReference Number: RZ-VM-SC\u003cbr\u003eIntake Type: Vaccum LineIf you are Installing ITB or a Forced induction system on your car, you may need more vaccum sources. This item is perfect for those who needs to gather more vaccum lines. This kit includes:\u003cbr\u003e- 1x Vaccum Manifold Unit with 6x 1\/8NPT holes and 1x 1\/4NPT hole.\u003cbr\u003e-All neccessary fitting and plugs.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e"}

{"id":2095451078753,"title":"Samco Japan - 2 Pcs Cooling Hoses Set Radiator - Nissan - 180 SX RPS13","handle":"samco-japan-2-pcs-cooling-hoses-set-radiator-nissan-180-sx-rps13-40tcs55-c","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Samco Japan\u003cbr\u003ePart Number: 40TCS55\/C\u003cbr\u003eHose Type: Cooling Hoses\u003cbr\u003eHose Numbers per set: 2\u003cbr\u003eHose Colour (Please leave us a note during checkout): Standard color:\tBlue \/ Red \/ Black \/ Green \/ Yellow \/ Orange\u003cbr\u003e\u003cbr\u003eSamco is the leader in the Cooling hose system for a reason. Their Unique 3 to 5 plies design ensure long lasting qualities to any type of usages: Boost, Cooling, Fueling. Their design is composed of:\u003cbr\u003eOuter surface coating to resist extreem deterioration to heat or cold.\u003cbr\u003eUnique 3 to 5 plies lamination superposing original silicone material and aramid fiber on 3 to 5 layers depending on the item and hose diameter, the strength exceeds by far any OEM units.\nThe 5 kg \/ cm2 normal maximum pressure resistance (in the case of inner diameter 25 mm) prevents hose expansion and \nburst.\u003cbr\u003ePrecise and carefully hand-made construction creates an extremely flat inner surface, completely eliminating stress on the fluid . In addition, \nall sections are covered by adopting suitable treatment for applications such as oil, fuel, heat resistance.\u003cbr\u003e\u003cbr\u003ePlease note that all Hoses from Samco are made to order: allow 6 to 8 weeks lead time. Colour are customisable on order, let us know during checkout in the notes. All Samco Hoses sold on our website are garantied original and follow their strict warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e180 SX | RPS13 | 1989-1993 | TC | SR20DET | I4\u003cbr\u003e180 SX | RPS13 | 1989-1993 | NA | SR20DE | I4\u003c!--split--\u003e","published_at":"2019-04-26T16:18:03+08:00","created_at":"2019-04-26T16:18:04+08:00","vendor":"Samco Japan","type":"Cooling Hoses","tags":["180-sx-rps13-1989-1993-na-sr20de-i4","180-sx-rps13-1989-1993-tc-sr20det-i4","1989","1990","1991","1992","1993","cooling","cooling-hoses","coolinghoses","jp1","new","nissan","samco-japan","ws111"],"price":18500,"price_min":18500,"price_max":18500,"available":true,"price_varies":false,"compare_at_price":19600,"compare_at_price_min":19600,"compare_at_price_max":19600,"compare_at_price_varies":false,"variants":[{"id":19755635212385,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"40TCS55\/C","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Samco Japan - 2 Pcs Cooling Hoses Set Radiator - Nissan - 180 SX RPS13","public_title":null,"options":["Default Title"],"price":18500,"weight":6000,"compare_at_price":19600,"inventory_quantity":46,"inventory_management":"shopify","inventory_policy":"deny","barcode":"40TCS55C","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_2_hoses_radiator_kit_766d8ea4-9fd1-4de0-8712-831bc9ba42ab.jpg?v=1710179401"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_2_hoses_radiator_kit_766d8ea4-9fd1-4de0-8712-831bc9ba42ab.jpg?v=1710179401","options":["Title"],"media":[{"alt":"Samco Japan - 2 Pcs Cooling Hoses Set Radiator - Nissan - 180 SX RPS13 - 40TCS55\/C - RZCREWGARAGE","id":26388475838646,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_2_hoses_radiator_kit_766d8ea4-9fd1-4de0-8712-831bc9ba42ab.jpg?v=1710179401"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_2_hoses_radiator_kit_766d8ea4-9fd1-4de0-8712-831bc9ba42ab.jpg?v=1710179401","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Samco Japan\u003cbr\u003ePart Number: 40TCS55\/C\u003cbr\u003eHose Type: Cooling Hoses\u003cbr\u003eHose Numbers per set: 2\u003cbr\u003eHose Colour (Please leave us a note during checkout): Standard color:\tBlue \/ Red \/ Black \/ Green \/ Yellow \/ Orange\u003cbr\u003e\u003cbr\u003eSamco is the leader in the Cooling hose system for a reason. Their Unique 3 to 5 plies design ensure long lasting qualities to any type of usages: Boost, Cooling, Fueling. Their design is composed of:\u003cbr\u003eOuter surface coating to resist extreem deterioration to heat or cold.\u003cbr\u003eUnique 3 to 5 plies lamination superposing original silicone material and aramid fiber on 3 to 5 layers depending on the item and hose diameter, the strength exceeds by far any OEM units.\nThe 5 kg \/ cm2 normal maximum pressure resistance (in the case of inner diameter 25 mm) prevents hose expansion and \nburst.\u003cbr\u003ePrecise and carefully hand-made construction creates an extremely flat inner surface, completely eliminating stress on the fluid . In addition, \nall sections are covered by adopting suitable treatment for applications such as oil, fuel, heat resistance.\u003cbr\u003e\u003cbr\u003ePlease note that all Hoses from Samco are made to order: allow 6 to 8 weeks lead time. Colour are customisable on order, let us know during checkout in the notes. All Samco Hoses sold on our website are garantied original and follow their strict warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e180 SX | RPS13 | 1989-1993 | TC | SR20DET | I4\u003cbr\u003e180 SX | RPS13 | 1989-1993 | NA | SR20DE | I4\u003c!--split--\u003e"}

{"id":2095450882145,"title":"Samco Japan - 2 Pcs Cooling Hoses Set Radiator - Nissan - Fairlady Z GCZ32","handle":"samco-japan-2-pcs-cooling-hoses-set-radiator-nissan-fairlady-z-gcz32-40tcs08-c","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Samco Japan\u003cbr\u003ePart Number: 40TCS08\/C\u003cbr\u003eHose Type: Cooling Hoses\u003cbr\u003eHose Numbers per set: 2\u003cbr\u003eHose Colour (Please leave us a note during checkout): Standard color:\tBlue \/ Red \/ Black \/ Green \/ Yellow \/ Orange\u003cbr\u003e\u003cbr\u003eSamco is the leader in the Cooling hose system for a reason. Their Unique 3 to 5 plies design ensure long lasting qualities to any type of usages: Boost, Cooling, Fueling. Their design is composed of:\u003cbr\u003eOuter surface coating to resist extreem deterioration to heat or cold.\u003cbr\u003eUnique 3 to 5 plies lamination superposing original silicone material and aramid fiber on 3 to 5 layers depending on the item and hose diameter, the strength exceeds by far any OEM units.\nThe 5 kg \/ cm2 normal maximum pressure resistance (in the case of inner diameter 25 mm) prevents hose expansion and \nburst.\u003cbr\u003ePrecise and carefully hand-made construction creates an extremely flat inner surface, completely eliminating stress on the fluid . In addition, \nall sections are covered by adopting suitable treatment for applications such as oil, fuel, heat resistance.\u003cbr\u003e\u003cbr\u003ePlease note that all Hoses from Samco are made to order: allow 6 to 8 weeks lead time. Colour are customisable on order, let us know during checkout in the notes. All Samco Hoses sold on our website are garantied original and follow their strict warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eFairlady Z | GCZ32 Zenki | 1989-1993 | TT | VG30DETT | V6\u003cbr\u003eFairlady Z | GCZ32 Chuki Pre FL | 1993-1994 | TT | VG30DETT | V6\u003cbr\u003eFairlady Z | GCZ32 Chuki Aft FL | 1994-1996 | TT | VG30DETT | V6\u003cbr\u003eFairlady Z | GCZ32 Kouki | 1997-2000 | TT | VG30DETT | V6\u003c!--split--\u003e","published_at":"2019-04-26T16:17:57+08:00","created_at":"2019-04-26T16:17:58+08:00","vendor":"Samco Japan","type":"Cooling Hoses","tags":["1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","cooling","cooling-hoses","coolinghoses","fairlady-z-gcz32-chuki-aft-fl-1994-1996-tt-vg30dett-v6","fairlady-z-gcz32-chuki-pre-fl-1993-1994-tt-vg30dett-v6","fairlady-z-gcz32-kouki-1997-2000-tt-vg30dett-v6","fairlady-z-gcz32-zenki-1989-1993-tt-vg30dett-v6","jp1","new","nissan","samco-japan","ws114"],"price":47500,"price_min":47500,"price_max":47500,"available":true,"price_varies":false,"compare_at_price":52300,"compare_at_price_min":52300,"compare_at_price_max":52300,"compare_at_price_varies":false,"variants":[{"id":19755634557025,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"40TCS08\/C","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Samco Japan - 2 Pcs Cooling Hoses Set Radiator - Nissan - Fairlady Z GCZ32","public_title":null,"options":["Default Title"],"price":47500,"weight":6000,"compare_at_price":52300,"inventory_quantity":46,"inventory_management":"shopify","inventory_policy":"deny","barcode":"40TCS08C","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_2_hoses_radiator_kit_a30faf80-6cb0-497c-bd16-e03407a3ad38.jpg?v=1710179399"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_2_hoses_radiator_kit_a30faf80-6cb0-497c-bd16-e03407a3ad38.jpg?v=1710179399","options":["Title"],"media":[{"alt":"Samco Japan - 2 Pcs Cooling Hoses Set Radiator - Nissan - Fairlady Z GCZ32 - 40TCS08\/C - RZCREWGARAGE","id":26388475642038,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_2_hoses_radiator_kit_a30faf80-6cb0-497c-bd16-e03407a3ad38.jpg?v=1710179399"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_2_hoses_radiator_kit_a30faf80-6cb0-497c-bd16-e03407a3ad38.jpg?v=1710179399","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Samco Japan\u003cbr\u003ePart Number: 40TCS08\/C\u003cbr\u003eHose Type: Cooling Hoses\u003cbr\u003eHose Numbers per set: 2\u003cbr\u003eHose Colour (Please leave us a note during checkout): Standard color:\tBlue \/ Red \/ Black \/ Green \/ Yellow \/ Orange\u003cbr\u003e\u003cbr\u003eSamco is the leader in the Cooling hose system for a reason. Their Unique 3 to 5 plies design ensure long lasting qualities to any type of usages: Boost, Cooling, Fueling. Their design is composed of:\u003cbr\u003eOuter surface coating to resist extreem deterioration to heat or cold.\u003cbr\u003eUnique 3 to 5 plies lamination superposing original silicone material and aramid fiber on 3 to 5 layers depending on the item and hose diameter, the strength exceeds by far any OEM units.\nThe 5 kg \/ cm2 normal maximum pressure resistance (in the case of inner diameter 25 mm) prevents hose expansion and \nburst.\u003cbr\u003ePrecise and carefully hand-made construction creates an extremely flat inner surface, completely eliminating stress on the fluid . In addition, \nall sections are covered by adopting suitable treatment for applications such as oil, fuel, heat resistance.\u003cbr\u003e\u003cbr\u003ePlease note that all Hoses from Samco are made to order: allow 6 to 8 weeks lead time. Colour are customisable on order, let us know during checkout in the notes. All Samco Hoses sold on our website are garantied original and follow their strict warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eFairlady Z | GCZ32 Zenki | 1989-1993 | TT | VG30DETT | V6\u003cbr\u003eFairlady Z | GCZ32 Chuki Pre FL | 1993-1994 | TT | VG30DETT | V6\u003cbr\u003eFairlady Z | GCZ32 Chuki Aft FL | 1994-1996 | TT | VG30DETT | V6\u003cbr\u003eFairlady Z | GCZ32 Kouki | 1997-2000 | TT | VG30DETT | V6\u003c!--split--\u003e"}

{"id":2095451340897,"title":"Samco Japan - 2 Pcs Cooling Hoses Set Radiator - Nissan - Pulsar RNN14","handle":"samco-japan-2-pcs-cooling-hoses-set-radiator-nissan-pulsar-rnn14-40tcs111-c","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Samco Japan\u003cbr\u003ePart Number: 40TCS111\/C\u003cbr\u003eHose Type: Cooling Hoses\u003cbr\u003eHose Numbers per set: 2\u003cbr\u003eHose Colour (Please leave us a note during checkout): Standard color:\tBlue \/ Red \/ Black \/ Green \/ Yellow \/ Orange\u003cbr\u003e\u003cbr\u003eSamco is the leader in the Cooling hose system for a reason. Their Unique 3 to 5 plies design ensure long lasting qualities to any type of usages: Boost, Cooling, Fueling. Their design is composed of:\u003cbr\u003eOuter surface coating to resist extreem deterioration to heat or cold.\u003cbr\u003eUnique 3 to 5 plies lamination superposing original silicone material and aramid fiber on 3 to 5 layers depending on the item and hose diameter, the strength exceeds by far any OEM units.\nThe 5 kg \/ cm2 normal maximum pressure resistance (in the case of inner diameter 25 mm) prevents hose expansion and \nburst.\u003cbr\u003ePrecise and carefully hand-made construction creates an extremely flat inner surface, completely eliminating stress on the fluid . In addition, \nall sections are covered by adopting suitable treatment for applications such as oil, fuel, heat resistance.\u003cbr\u003e\u003cbr\u003ePlease note that all Hoses from Samco are made to order: allow 6 to 8 weeks lead time. Colour are customisable on order, let us know during checkout in the notes. All Samco Hoses sold on our website are garantied original and follow their strict warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003ePulsar | RNN14 Zenki | 1990-1992 | TC | SR20DET | I4\u003cbr\u003ePulsar | RNN14 Kouki | 1992-1995 | TC | SR20DET | I4\u003c!--split--\u003e","published_at":"2019-04-26T16:18:08+08:00","created_at":"2019-04-26T16:18:09+08:00","vendor":"Samco Japan","type":"Cooling Hoses","tags":["1990","1991","1992","1993","1994","1995","cooling","cooling-hoses","coolinghoses","jp1","new","nissan","pulsar-rnn14-kouki-1992-1995-tc-sr20det-i4","pulsar-rnn14-zenki-1990-1992-tc-sr20det-i4","samco-japan","ws112"],"price":22300,"price_min":22300,"price_max":22300,"available":true,"price_varies":false,"compare_at_price":24000,"compare_at_price_min":24000,"compare_at_price_max":24000,"compare_at_price_varies":false,"variants":[{"id":19755637604449,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"40TCS111\/C","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Samco Japan - 2 Pcs Cooling Hoses Set Radiator - Nissan - Pulsar RNN14","public_title":null,"options":["Default Title"],"price":22300,"weight":6000,"compare_at_price":24000,"inventory_quantity":46,"inventory_management":"shopify","inventory_policy":"deny","barcode":"40TCS111C","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_2_hoses_radiator_kit_c1284a3d-f93d-4315-bfb8-3ba646b618c1.jpg?v=1710179404"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_2_hoses_radiator_kit_c1284a3d-f93d-4315-bfb8-3ba646b618c1.jpg?v=1710179404","options":["Title"],"media":[{"alt":"Samco Japan - 2 Pcs Cooling Hoses Set Radiator - Nissan - Pulsar RNN14 - 40TCS111\/C - RZCREWGARAGE","id":26388476035254,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_2_hoses_radiator_kit_c1284a3d-f93d-4315-bfb8-3ba646b618c1.jpg?v=1710179404"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_2_hoses_radiator_kit_c1284a3d-f93d-4315-bfb8-3ba646b618c1.jpg?v=1710179404","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Samco Japan\u003cbr\u003ePart Number: 40TCS111\/C\u003cbr\u003eHose Type: Cooling Hoses\u003cbr\u003eHose Numbers per set: 2\u003cbr\u003eHose Colour (Please leave us a note during checkout): Standard color:\tBlue \/ Red \/ Black \/ Green \/ Yellow \/ Orange\u003cbr\u003e\u003cbr\u003eSamco is the leader in the Cooling hose system for a reason. Their Unique 3 to 5 plies design ensure long lasting qualities to any type of usages: Boost, Cooling, Fueling. Their design is composed of:\u003cbr\u003eOuter surface coating to resist extreem deterioration to heat or cold.\u003cbr\u003eUnique 3 to 5 plies lamination superposing original silicone material and aramid fiber on 3 to 5 layers depending on the item and hose diameter, the strength exceeds by far any OEM units.\nThe 5 kg \/ cm2 normal maximum pressure resistance (in the case of inner diameter 25 mm) prevents hose expansion and \nburst.\u003cbr\u003ePrecise and carefully hand-made construction creates an extremely flat inner surface, completely eliminating stress on the fluid . In addition, \nall sections are covered by adopting suitable treatment for applications such as oil, fuel, heat resistance.\u003cbr\u003e\u003cbr\u003ePlease note that all Hoses from Samco are made to order: allow 6 to 8 weeks lead time. Colour are customisable on order, let us know during checkout in the notes. All Samco Hoses sold on our website are garantied original and follow their strict warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003ePulsar | RNN14 Zenki | 1990-1992 | TC | SR20DET | I4\u003cbr\u003ePulsar | RNN14 Kouki | 1992-1995 | TC | SR20DET | I4\u003c!--split--\u003e"}

{"id":2095450390625,"title":"Samco Japan - 2 Pcs Cooling Hoses Set Radiator - Nissan - Skyline GT-R BNR32","handle":"samco-japan-2-pcs-cooling-hoses-set-radiator-nissan-skyline-gt-r-bnr32-40tcs37-c","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Samco Japan\u003cbr\u003ePart Number: 40TCS37\/C\u003cbr\u003eHose Type: Cooling Hoses\u003cbr\u003eHose Numbers per set: 2\u003cbr\u003eHose Colour (Please leave us a note during checkout): Standard color:\tBlue \/ Red \/ Black \/ Green \/ Yellow \/ Orange\u003cbr\u003e\u003cbr\u003eSamco is the leader in the Cooling hose system for a reason. Their Unique 3 to 5 plies design ensure long lasting qualities to any type of usages: Boost, Cooling, Fueling. Their design is composed of:\u003cbr\u003eOuter surface coating to resist extreem deterioration to heat or cold.\u003cbr\u003eUnique 3 to 5 plies lamination superposing original silicone material and aramid fiber on 3 to 5 layers depending on the item and hose diameter, the strength exceeds by far any OEM units.\nThe 5 kg \/ cm2 normal maximum pressure resistance (in the case of inner diameter 25 mm) prevents hose expansion and \nburst.\u003cbr\u003ePrecise and carefully hand-made construction creates an extremely flat inner surface, completely eliminating stress on the fluid . In addition, \nall sections are covered by adopting suitable treatment for applications such as oil, fuel, heat resistance.\u003cbr\u003e\u003cbr\u003ePlease note that all Hoses from Samco are made to order: allow 6 to 8 weeks lead time. Colour are customisable on order, let us know during checkout in the notes. All Samco Hoses sold on our website are garantied original and follow their strict warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e","published_at":"2019-04-26T16:17:45+08:00","created_at":"2019-04-26T16:17:46+08:00","vendor":"Samco Japan","type":"Cooling Hoses","tags":["1989","1990","1991","1992","1993","1994","cooling","cooling-hoses","coolinghoses","jp1","new","nissan","samco-japan","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","ws111"],"price":19400,"price_min":19400,"price_max":19400,"available":true,"price_varies":false,"compare_at_price":20700,"compare_at_price_min":20700,"compare_at_price_max":20700,"compare_at_price_varies":false,"variants":[{"id":19755633606753,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"40TCS37\/C","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Samco Japan - 2 Pcs Cooling Hoses Set Radiator - Nissan - Skyline GT-R BNR32","public_title":null,"options":["Default Title"],"price":19400,"weight":6000,"compare_at_price":20700,"inventory_quantity":46,"inventory_management":"shopify","inventory_policy":"deny","barcode":"40TCS37C","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_2_hoses_radiator_kit_0073577e-7de2-4c49-b39e-15a534ae38ec.jpg?v=1710179387"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_2_hoses_radiator_kit_0073577e-7de2-4c49-b39e-15a534ae38ec.jpg?v=1710179387","options":["Title"],"media":[{"alt":"Samco Japan - 2 Pcs Cooling Hoses Set Radiator - Nissan - Skyline GT-R BNR32 - 40TCS37\/C - RZCREWGARAGE","id":26388475248822,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_2_hoses_radiator_kit_0073577e-7de2-4c49-b39e-15a534ae38ec.jpg?v=1710179387"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_2_hoses_radiator_kit_0073577e-7de2-4c49-b39e-15a534ae38ec.jpg?v=1710179387","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Samco Japan\u003cbr\u003ePart Number: 40TCS37\/C\u003cbr\u003eHose Type: Cooling Hoses\u003cbr\u003eHose Numbers per set: 2\u003cbr\u003eHose Colour (Please leave us a note during checkout): Standard color:\tBlue \/ Red \/ Black \/ Green \/ Yellow \/ Orange\u003cbr\u003e\u003cbr\u003eSamco is the leader in the Cooling hose system for a reason. Their Unique 3 to 5 plies design ensure long lasting qualities to any type of usages: Boost, Cooling, Fueling. Their design is composed of:\u003cbr\u003eOuter surface coating to resist extreem deterioration to heat or cold.\u003cbr\u003eUnique 3 to 5 plies lamination superposing original silicone material and aramid fiber on 3 to 5 layers depending on the item and hose diameter, the strength exceeds by far any OEM units.\nThe 5 kg \/ cm2 normal maximum pressure resistance (in the case of inner diameter 25 mm) prevents hose expansion and \nburst.\u003cbr\u003ePrecise and carefully hand-made construction creates an extremely flat inner surface, completely eliminating stress on the fluid . In addition, \nall sections are covered by adopting suitable treatment for applications such as oil, fuel, heat resistance.\u003cbr\u003e\u003cbr\u003ePlease note that all Hoses from Samco are made to order: allow 6 to 8 weeks lead time. Colour are customisable on order, let us know during checkout in the notes. All Samco Hoses sold on our website are garantied original and follow their strict warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e"}

{"id":2095450620001,"title":"Samco Japan - 2 Pcs Cooling Hoses Set Radiator - Nissan - Skyline HCR32","handle":"samco-japan-2-pcs-cooling-hoses-set-radiator-nissan-skyline-hcr32-40tcs83-c","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Samco Japan\u003cbr\u003ePart Number: 40TCS83\/C\u003cbr\u003eHose Type: Cooling Hoses\u003cbr\u003eHose Numbers per set: 2\u003cbr\u003eHose Colour (Please leave us a note during checkout): Standard color:\tBlue \/ Red \/ Black \/ Green \/ Yellow \/ Orange\u003cbr\u003e\u003cbr\u003eSamco is the leader in the Cooling hose system for a reason. Their Unique 3 to 5 plies design ensure long lasting qualities to any type of usages: Boost, Cooling, Fueling. Their design is composed of:\u003cbr\u003eOuter surface coating to resist extreem deterioration to heat or cold.\u003cbr\u003eUnique 3 to 5 plies lamination superposing original silicone material and aramid fiber on 3 to 5 layers depending on the item and hose diameter, the strength exceeds by far any OEM units.\nThe 5 kg \/ cm2 normal maximum pressure resistance (in the case of inner diameter 25 mm) prevents hose expansion and \nburst.\u003cbr\u003ePrecise and carefully hand-made construction creates an extremely flat inner surface, completely eliminating stress on the fluid . In addition, \nall sections are covered by adopting suitable treatment for applications such as oil, fuel, heat resistance.\u003cbr\u003e\u003cbr\u003ePlease note that all Hoses from Samco are made to order: allow 6 to 8 weeks lead time. Colour are customisable on order, let us know during checkout in the notes. All Samco Hoses sold on our website are garantied original and follow their strict warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline | HCR32 Zenki | 1989-1991 | TC | RB20DET | I6\u003cbr\u003eSkyline | HCR32 Kouki | 1991-1993 | TC | RB20DET | I6\u003c!--split--\u003e","published_at":"2019-04-26T16:17:52+08:00","created_at":"2019-04-26T16:17:53+08:00","vendor":"Samco Japan","type":"Cooling Hoses","tags":["1989","1990","1991","1992","1993","cooling","cooling-hoses","coolinghoses","jp1","new","nissan","samco-japan","skyline-hcr32-kouki-1991-1993-tc-rb20det-i6","skyline-hcr32-zenki-1989-1991-tc-rb20det-i6","ws111"],"price":18500,"price_min":18500,"price_max":18500,"available":true,"price_varies":false,"compare_at_price":19600,"compare_at_price_min":19600,"compare_at_price_max":19600,"compare_at_price_varies":false,"variants":[{"id":19755633999969,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"40TCS83\/C","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Samco Japan - 2 Pcs Cooling Hoses Set Radiator - Nissan - Skyline HCR32","public_title":null,"options":["Default Title"],"price":18500,"weight":6000,"compare_at_price":19600,"inventory_quantity":46,"inventory_management":"shopify","inventory_policy":"deny","barcode":"40TCS83C","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_2_hoses_radiator_kit_7c64583f-2692-43ec-9ea4-59cba400187e.jpg?v=1710179398"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_2_hoses_radiator_kit_7c64583f-2692-43ec-9ea4-59cba400187e.jpg?v=1710179398","options":["Title"],"media":[{"alt":"Samco Japan - 2 Pcs Cooling Hoses Set Radiator - Nissan - Skyline HCR32 - 40TCS83\/C - RZCREWGARAGE","id":26388475445430,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_2_hoses_radiator_kit_7c64583f-2692-43ec-9ea4-59cba400187e.jpg?v=1710179398"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_2_hoses_radiator_kit_7c64583f-2692-43ec-9ea4-59cba400187e.jpg?v=1710179398","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Samco Japan\u003cbr\u003ePart Number: 40TCS83\/C\u003cbr\u003eHose Type: Cooling Hoses\u003cbr\u003eHose Numbers per set: 2\u003cbr\u003eHose Colour (Please leave us a note during checkout): Standard color:\tBlue \/ Red \/ Black \/ Green \/ Yellow \/ Orange\u003cbr\u003e\u003cbr\u003eSamco is the leader in the Cooling hose system for a reason. Their Unique 3 to 5 plies design ensure long lasting qualities to any type of usages: Boost, Cooling, Fueling. Their design is composed of:\u003cbr\u003eOuter surface coating to resist extreem deterioration to heat or cold.\u003cbr\u003eUnique 3 to 5 plies lamination superposing original silicone material and aramid fiber on 3 to 5 layers depending on the item and hose diameter, the strength exceeds by far any OEM units.\nThe 5 kg \/ cm2 normal maximum pressure resistance (in the case of inner diameter 25 mm) prevents hose expansion and \nburst.\u003cbr\u003ePrecise and carefully hand-made construction creates an extremely flat inner surface, completely eliminating stress on the fluid . In addition, \nall sections are covered by adopting suitable treatment for applications such as oil, fuel, heat resistance.\u003cbr\u003e\u003cbr\u003ePlease note that all Hoses from Samco are made to order: allow 6 to 8 weeks lead time. Colour are customisable on order, let us know during checkout in the notes. All Samco Hoses sold on our website are garantied original and follow their strict warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline | HCR32 Zenki | 1989-1991 | TC | RB20DET | I6\u003cbr\u003eSkyline | HCR32 Kouki | 1991-1993 | TC | RB20DET | I6\u003c!--split--\u003e"}

{"id":380969910299,"title":"Sard Dual Core Radiator - Nissan - 180 SX PS13\/RPS13 (MT)","handle":"sard-dual-core-radiator-nissan-180-sx-ps13-rps13-mt-35491","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Sard\u003cbr\u003ePart Number: 35491\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003eRadiator Cap included (unless the stock radiator design does not have the cap on the radiator itself)\u003cbr\u003e\u003cbr\u003eSard Racing company is an arm of Sard Japan manufacturing aluminum radiator at an affordable price.\u003cbr\u003e\nThis radiator is a Full aluminium unit to help in cooling down your engine in any occasion. With its full polished body and Sard embossed logo it ensures the perfect look and efficiency in your engine bay. These radiators fit the stock fan mounting points. Slim fans are available in the shop.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e180 SX | RPS13 | 1989-1993 | TC | SR20DET | I4\u003cbr\u003e180 SX | RPS13 | 1989-1993 | NA | SR20DE | I4\u003cbr\u003eSilvia | PS13 | 1991-1993 | TC | SR20DET | I4\u003cbr\u003eSilvia | PS13 | 1991-1993 | NA | SR20DE | I4\u003c!--split--\u003e","published_at":"2017-11-28T23:35:12+08:00","created_at":"2017-11-28T23:35:12+08:00","vendor":"Sard","type":"Radiators","tags":["180-sx-rps13-1989-1993-na-sr20de-i4","180-sx-rps13-1989-1993-tc-sr20det-i4","1989","1990","1991","1992","1993","cooling","mt","nissan","radiators","sard","sg1","silvia-ps13-1991-1993-na-sr20de-i4","silvia-ps13-1991-1993-tc-sr20det-i4","ws121"],"price":37800,"price_min":37800,"price_max":37800,"available":true,"price_varies":false,"compare_at_price":37800,"compare_at_price_min":37800,"compare_at_price_max":37800,"compare_at_price_varies":false,"variants":[{"id":4857897156635,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"35491","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Sard Dual Core Radiator - Nissan - 180 SX PS13\/RPS13 (MT)","public_title":null,"options":["Default Title"],"price":37800,"weight":19000,"compare_at_price":37800,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SARD_radiator_1_e71c665f-5729-4ed5-b865-771ac759020e.jpg?v=1710146043"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SARD_radiator_1_e71c665f-5729-4ed5-b865-771ac759020e.jpg?v=1710146043","options":["Title"],"media":[{"alt":"Sard Dual Core Radiator - Nissan - 180 SX PS13\/RPS13 (MT) - 35491 - RZCREWGARAGE","id":25435274477750,"position":1,"preview_image":{"aspect_ratio":1.509,"height":795,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SARD_radiator_1_e71c665f-5729-4ed5-b865-771ac759020e.jpg?v=1710146043"},"aspect_ratio":1.509,"height":795,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SARD_radiator_1_e71c665f-5729-4ed5-b865-771ac759020e.jpg?v=1710146043","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Sard\u003cbr\u003ePart Number: 35491\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003eRadiator Cap included (unless the stock radiator design does not have the cap on the radiator itself)\u003cbr\u003e\u003cbr\u003eSard Racing company is an arm of Sard Japan manufacturing aluminum radiator at an affordable price.\u003cbr\u003e\nThis radiator is a Full aluminium unit to help in cooling down your engine in any occasion. With its full polished body and Sard embossed logo it ensures the perfect look and efficiency in your engine bay. These radiators fit the stock fan mounting points. Slim fans are available in the shop.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e180 SX | RPS13 | 1989-1993 | TC | SR20DET | I4\u003cbr\u003e180 SX | RPS13 | 1989-1993 | NA | SR20DE | I4\u003cbr\u003eSilvia | PS13 | 1991-1993 | TC | SR20DET | I4\u003cbr\u003eSilvia | PS13 | 1991-1993 | NA | SR20DE | I4\u003c!--split--\u003e"}

{"id":380970663963,"title":"Sard Dual Core Radiator - Nissan - Fairlady Z CZ32 Z32 (VG30DETT) (MT)","handle":"sard-dual-core-radiator-nissan-fairlady-z-cz32-z32-vg30dett-mt-37680","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Sard\u003cbr\u003ePart Number: 37680\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003eRadiator Cap included (unless the stock radiator design does not have the cap on the radiator itself)\u003cbr\u003e\u003cbr\u003eSard Racing company is an arm of Sard Japan manufacturing aluminum radiator at an affordable price.\u003cbr\u003e\nThis radiator is a Full aluminium unit to help in cooling down your engine in any occasion. With its full polished body and Sard embossed logo it ensures the perfect look and efficiency in your engine bay. These radiators fit the stock fan mounting points. Slim fans are available in the shop.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eFairlady Z | CZ32 Zenki | 1989-1993 | TT | VG30DETT | V6\u003cbr\u003eFairlady Z | CZ32 Chuki Pre FL | 1993-1994 | TT | VG30DETT | V6\u003cbr\u003eFairlady Z | CZ32 Chuki Aft FL | 1994-1996 | TT | VG30DETT | V6\u003cbr\u003eFairlady Z | CZ32 Kouki | 1997-2000 | TT | VG30DETT | V6\u003c!--split--\u003e","published_at":"2017-11-28T23:35:28+08:00","created_at":"2017-11-28T23:35:28+08:00","vendor":"Sard","type":"Radiators","tags":["1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","cooling","fairlady-z-cz32-chuki-aft-fl-1994-1996-tt-vg30dett-v6","fairlady-z-cz32-chuki-pre-fl-1993-1994-tt-vg30dett-v6","fairlady-z-cz32-kouki-1997-2000-tt-vg30dett-v6","fairlady-z-cz32-zenki-1989-1993-tt-vg30dett-v6","mt","nissan","radiators","sard","sg1","ws122"],"price":39400,"price_min":39400,"price_max":39400,"available":true,"price_varies":false,"compare_at_price":39400,"compare_at_price_min":39400,"compare_at_price_max":39400,"compare_at_price_varies":false,"variants":[{"id":4857899647003,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"37680","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Sard Dual Core Radiator - Nissan - Fairlady Z CZ32 Z32 (VG30DETT) (MT)","public_title":null,"options":["Default Title"],"price":39400,"weight":19000,"compare_at_price":39400,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SARD_radiator_1_a5b75e93-e563-4d5e-bd6c-7d22105be9f8.jpg?v=1710146062"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SARD_radiator_1_a5b75e93-e563-4d5e-bd6c-7d22105be9f8.jpg?v=1710146062","options":["Title"],"media":[{"alt":"Sard Dual Core Radiator - Nissan - Fairlady Z CZ32 Z32 (VG30DETT) (MT) - 37680 - RZCREWGARAGE","id":25435275854006,"position":1,"preview_image":{"aspect_ratio":1.509,"height":795,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SARD_radiator_1_a5b75e93-e563-4d5e-bd6c-7d22105be9f8.jpg?v=1710146062"},"aspect_ratio":1.509,"height":795,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SARD_radiator_1_a5b75e93-e563-4d5e-bd6c-7d22105be9f8.jpg?v=1710146062","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Sard\u003cbr\u003ePart Number: 37680\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003eRadiator Cap included (unless the stock radiator design does not have the cap on the radiator itself)\u003cbr\u003e\u003cbr\u003eSard Racing company is an arm of Sard Japan manufacturing aluminum radiator at an affordable price.\u003cbr\u003e\nThis radiator is a Full aluminium unit to help in cooling down your engine in any occasion. With its full polished body and Sard embossed logo it ensures the perfect look and efficiency in your engine bay. These radiators fit the stock fan mounting points. Slim fans are available in the shop.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eFairlady Z | CZ32 Zenki | 1989-1993 | TT | VG30DETT | V6\u003cbr\u003eFairlady Z | CZ32 Chuki Pre FL | 1993-1994 | TT | VG30DETT | V6\u003cbr\u003eFairlady Z | CZ32 Chuki Aft FL | 1994-1996 | TT | VG30DETT | V6\u003cbr\u003eFairlady Z | CZ32 Kouki | 1997-2000 | TT | VG30DETT | V6\u003c!--split--\u003e"}

{"id":380970401819,"title":"Sard Dual Core Radiator - Nissan - Skyline GT-R BNR32 (MT)","handle":"sard-dual-core-radiator-nissan-skyline-gt-r-bnr32-mt-36551","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Sard\u003cbr\u003ePart Number: 36551\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003eRadiator Cap included (unless the stock radiator design does not have the cap on the radiator itself)\u003cbr\u003e\u003cbr\u003eSard Racing company is an arm of Sard Japan manufacturing aluminum radiator at an affordable price.\u003cbr\u003e\nThis radiator is a Full aluminium unit to help in cooling down your engine in any occasion. With its full polished body and Sard embossed logo it ensures the perfect look and efficiency in your engine bay. These radiators fit the stock fan mounting points. Slim fans are available in the shop.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e","published_at":"2017-11-28T23:35:23+08:00","created_at":"2017-11-28T23:35:23+08:00","vendor":"Sard","type":"Radiators","tags":["1989","1990","1991","1992","1993","1994","cooling","mt","nissan","radiators","sard","sg1","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","ws120"],"price":33200,"price_min":33200,"price_max":33200,"available":true,"price_varies":false,"compare_at_price":33200,"compare_at_price_min":33200,"compare_at_price_max":33200,"compare_at_price_varies":false,"variants":[{"id":4857898762267,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"36551","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Sard Dual Core Radiator - Nissan - Skyline GT-R BNR32 (MT)","public_title":null,"options":["Default Title"],"price":33200,"weight":19000,"compare_at_price":33200,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SARD_radiator_1_8ec156ce-4ea9-4706-84dd-d9b077c40b1d.jpg?v=1710146058"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SARD_radiator_1_8ec156ce-4ea9-4706-84dd-d9b077c40b1d.jpg?v=1710146058","options":["Title"],"media":[{"alt":"Sard Dual Core Radiator - Nissan - Skyline GT-R BNR32 (MT) - 36551 - RZCREWGARAGE","id":25435275395254,"position":1,"preview_image":{"aspect_ratio":1.509,"height":795,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SARD_radiator_1_8ec156ce-4ea9-4706-84dd-d9b077c40b1d.jpg?v=1710146058"},"aspect_ratio":1.509,"height":795,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SARD_radiator_1_8ec156ce-4ea9-4706-84dd-d9b077c40b1d.jpg?v=1710146058","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Sard\u003cbr\u003ePart Number: 36551\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003eRadiator Cap included (unless the stock radiator design does not have the cap on the radiator itself)\u003cbr\u003e\u003cbr\u003eSard Racing company is an arm of Sard Japan manufacturing aluminum radiator at an affordable price.\u003cbr\u003e\nThis radiator is a Full aluminium unit to help in cooling down your engine in any occasion. With its full polished body and Sard embossed logo it ensures the perfect look and efficiency in your engine bay. These radiators fit the stock fan mounting points. Slim fans are available in the shop.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003c!--split--\u003e"}