1998

{"id":4398777532513,"title":"AEM Electronics - V2 Water\/Methanol Injection Kit - Multi Input - For Forced Induction Gasoline Engines","handle":"aem-electronics-v2-water-methanol-injection-kit-multi-input-for-forced-induction-gasoline-engines","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: AEM Electronics\u003cbr\u003ePart Number: 30-3350\u003cbr\u003eThe AEM Water\/Methanol Injection System Advantage\u003cbr\u003e\nWater\/methanol injection for forced induction (turbocharged or supercharged) gas-powered race engines is a proven means for effectively reducing engine inlet air temperatures and suppressing harmful detonation. This allows racers to reliably increase boost and advance ignition timing—without using high-octane racing fuel—for power gains of up to 20%. AEM’s Water\/Methanol Injection Systems utilize the most robust hardware combined with more advanced features than any other comparably priced water\/methanol system.\u003cbr\u003e\n\u003cbr\u003e\nWater\/Methanol for All Boost Levels of Forced Induction Gas Race Engines\u003cbr\u003e\nThis kit features a multiple input design that enables users to install AEM’s Water\/Methanol Injection Kit on ultra-high boost vehicles (above 35 PSI) using a 0-5v voltage-based external MAP sensor.\u003cbr\u003e\u003cbr\u003e\nFeatures:\u003cbr\u003e\u003cbr\u003e\nRobust, Easy to Use Controller Designs\u003cbr\u003e\nThe new controller designs feature large, turn-resistant knobs and larger numbering to easily set accurate start and full activation points, with covered status LED and test buttons for added splash resistance. A plug is integrated into the controller housing for mating to the redesigned wiring harness’s positive-lock connector. The Boost Dependent controller housing has a molded-in, barbed nipple to accept a boost hose and a wiring legend on the back. Both controller housings feature an easy to access integrated fuse and molded mounting tabs.\u003cbr\u003e\n\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/aem-water-methanol-controller-internal-boost-sensor.jpg?v=1514052322\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\nSimplified Wiring\u003cbr\u003e\nAEM’s Water\/Methanol Injection kit’s wiring harness is terminated with a positive-lock connector on one end and has color-coded wires to ease installation. Both the power and ground wires for the pump are included in the harness which simplifies the wiring process and eliminates any chance of the pump accidentally activating from a short in the system. An additional wire is included for adding an optional on\/off solenoid to stop fluid flow when the system is inactive.\u003cbr\u003e\n\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/aem-water-methanol-injection-controller-plug.jpg?v=1514052538\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\nIntegrated Boost Safe Feature\u003cbr\u003e\nThe controllers in AEM’s Water Methanol systems include an integrated “Boost Safe” output feature that monitors the entire injection system and triggers a ground signal via an output if it detects a voltage-related error (short, bad connection, broken wire, overheated pump, high or low voltage signal, etc.), allowing users to define their failsafe strategy from something as simple as flashing a warning light to more advanced strategies like pulling boost or ignition, or switching fuel maps on a standalone engine management system. Combined with the integral and highly accurate conductive low-fluid switch in the tank, “Boost Safe” can also put your engine in safe mode before the system runs dry. This exclusive feature is found only on AEM Water\/Methanol Injection Systems.\u003cbr\u003e\n\u003cbr\u003e\nHeavy-Duty High Pressure Injection Pump\u003cbr\u003e\nAEM’s internally-bypassed water\/methanol injection pump does not cycle on and off and provides quiet, smooth operation. It features robust construction including integral hose fittings, EPDM seals and a Santoprene diaphragm that provides consistent and reliable fluid delivery.\u003cbr\u003e\n\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/aem-water-methanol-injection-200psi-pump_1.jpg?v=1514052643\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\nLow-Profile 1.15 Gallon Tank\u003cbr\u003e\nAEM’s gas Water\/Methanol Injection Systems are available with or without a compact 1.15 gallon tank that features an anti-starvation reservoir. A more accurate, conductive low level fluid sensor is integrated into the tank and features a positive lock connector with color-matched wires to the wiring harness. The sensor eliminates any chance of incorrect readings due to interference from debris.\u003cbr\u003e\n\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/AEM_watermethanol_lowfluidsensor.jpg?v=1514052717\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\nMachined Billet Injectors and Nozzles\u003cbr\u003e\nAEM includes one precision-machined billet injector in its gasoline Water\/Methanol Injection kit. It features an integral check valve to prevent unintended fluid flow. Three billet injector nozzles are included for matching water\/methanol flow to an engine’s horsepower output. Click the link for a Nozzle Flow Guide graph.\u003cbr\u003e\n\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/aem-water-methanol-injection-nozzle.jpg?v=1514052791\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\nRevised Flow Control Strategy for More Linear Fluid Delivery\u003cbr\u003e\nAEM’s engineers spent extensive time revamping the controller’s flow control strategy for a more linear flow output delivery. This means that the flow delivery better matches an engine’s need for water\/methanol injection, which further optimizes charge air cooling and detonation control.\u003cbr\u003e\n\u003cbr\u003e\nBoost Dependent and Multi-Input (0-5v\/frequency) progressive controller designs feature large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test button for enhanced splash resistance and mounting tabs\nWiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, integrated pump ground circuit and additional wire for optional on\/off fluid solenoid\u003cbr\u003e\n“Boost Safe” failsafe output included (for complete failsafe under all conditions, see our Water\/Methanol Failsafe Device)\u003cbr\u003e\nHeavy-duty high-pressure injection pump features integral fittings, a Santoprene diaphragm and EPDM seals to resist corrosion. Our pump maximizes line pressure for optimum atomization and its quiet, smooth operation is almost undetectable\u003cbr\u003e\nPrecision-machined billet-aluminum injector with integral check valve\u003cbr\u003e\nThree interchangeable injector nozzles to cover a wide variety of HP levels (250cc\/min, 500 cc\/min \u0026amp; 1,000cc\/min)\u003cbr\u003e\n1.15 gallon tank with anti-starvation reservoir, integral conductive low-fluid sensor and positive lock connector (tank-less systems available)\u003cbr\u003e\n20 feet of injection tubing included\u003cbr\u003e\nLED dash light for system status and low fluid warning\u003cbr\u003e\u003cbr\u003eMonitor the methanol flow and avoid engine damage with the methanol flow gauges \u003ca href=\"https:\/\/rzcrewgarage.com\/collections\/display-gauges-panels\/aem-electronics\"\u003ehere\u003c\/a\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eWater\/Methanol Injection Advantages for Gas Engines:\u003cbr\u003e\n\u003cbr\u003e\nReduces Air Inlet Charge Temps\u003cbr\u003e\nThe term “liquid intercooling” with water\/methanol injection refers to a highly atomized mist of water\/methanol that is injected into the airstream and begins to evaporate. As it does, this evaporative effect reduces air charge temps by as much as 100 degrees, and delivers a more oxygen-rich air charge.\u003cbr\u003e\n\u003cbr\u003e\nReduces Detonation (Knock)\u003cbr\u003e\nWater absorbs heat, and methanol is a cool burning, anti-knock rated fuel. When combined and introduced into the inlet stream, they can effectively increase your vehicle’s anti-knock index so you can reliably increase boost pressure and advance ignition timing using pump gas.\u003cbr\u003e\n\u003cbr\u003e\nReduces Carbon Deposits\u003cbr\u003e\nModern vehicles fitted with Exhaust Gas Recirculation (EGR) devices for emissions control promote heavy carbon build up inside the air intake. This carbon build-up can create ‘hot spots’ in the combustion chambers that can cause detonation. Water\/methanol injection has a ‘steam cleaning’ effect that reduces this carbon build up, and in some cases can increase fuel economy.\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/Water-Meth-Diagram-Gas_0.jpg?v=1514053008\" alt=\"\"\u003e","published_at":"2019-11-30T21:30:35+08:00","created_at":"2019-11-30T21:30:36+08:00","vendor":"AEM Electronics","type":"Methanol Kits","tags":["1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","aem-electronics","civic-fd2-2007-2010-na-k20z2-i4","methanol-kits","na-engine-kits","Universal","us1","ws112"],"price":69600,"price_min":69600,"price_max":69600,"available":true,"price_varies":false,"compare_at_price":72100,"compare_at_price_min":72100,"compare_at_price_max":72100,"compare_at_price_varies":false,"variants":[{"id":31417797771361,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"30-3350","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"AEM Electronics - V2 Water\/Methanol Injection Kit - Multi Input - For Forced Induction Gasoline Engines","public_title":null,"options":["Default Title"],"price":69600,"weight":9035,"compare_at_price":72100,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/30-3350_cc081b29-3cce-4810-ad24-1b7bfa2a6719.jpg?v=1710190327"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/30-3350_cc081b29-3cce-4810-ad24-1b7bfa2a6719.jpg?v=1710190327","options":["Title"],"media":[{"alt":"AEM Electronics - V2 Water\/Methanol Injection Kit - Multi Input - For Forced Induction Gasoline Engines - RZCrewGarage","id":22904222744758,"position":1,"preview_image":{"aspect_ratio":1.579,"height":266,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/30-3350_cc081b29-3cce-4810-ad24-1b7bfa2a6719.jpg?v=1710190327"},"aspect_ratio":1.579,"height":266,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/30-3350_cc081b29-3cce-4810-ad24-1b7bfa2a6719.jpg?v=1710190327","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: AEM Electronics\u003cbr\u003ePart Number: 30-3350\u003cbr\u003eThe AEM Water\/Methanol Injection System Advantage\u003cbr\u003e\nWater\/methanol injection for forced induction (turbocharged or supercharged) gas-powered race engines is a proven means for effectively reducing engine inlet air temperatures and suppressing harmful detonation. This allows racers to reliably increase boost and advance ignition timing—without using high-octane racing fuel—for power gains of up to 20%. AEM’s Water\/Methanol Injection Systems utilize the most robust hardware combined with more advanced features than any other comparably priced water\/methanol system.\u003cbr\u003e\n\u003cbr\u003e\nWater\/Methanol for All Boost Levels of Forced Induction Gas Race Engines\u003cbr\u003e\nThis kit features a multiple input design that enables users to install AEM’s Water\/Methanol Injection Kit on ultra-high boost vehicles (above 35 PSI) using a 0-5v voltage-based external MAP sensor.\u003cbr\u003e\u003cbr\u003e\nFeatures:\u003cbr\u003e\u003cbr\u003e\nRobust, Easy to Use Controller Designs\u003cbr\u003e\nThe new controller designs feature large, turn-resistant knobs and larger numbering to easily set accurate start and full activation points, with covered status LED and test buttons for added splash resistance. A plug is integrated into the controller housing for mating to the redesigned wiring harness’s positive-lock connector. The Boost Dependent controller housing has a molded-in, barbed nipple to accept a boost hose and a wiring legend on the back. Both controller housings feature an easy to access integrated fuse and molded mounting tabs.\u003cbr\u003e\n\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/aem-water-methanol-controller-internal-boost-sensor.jpg?v=1514052322\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\nSimplified Wiring\u003cbr\u003e\nAEM’s Water\/Methanol Injection kit’s wiring harness is terminated with a positive-lock connector on one end and has color-coded wires to ease installation. Both the power and ground wires for the pump are included in the harness which simplifies the wiring process and eliminates any chance of the pump accidentally activating from a short in the system. An additional wire is included for adding an optional on\/off solenoid to stop fluid flow when the system is inactive.\u003cbr\u003e\n\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/aem-water-methanol-injection-controller-plug.jpg?v=1514052538\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\nIntegrated Boost Safe Feature\u003cbr\u003e\nThe controllers in AEM’s Water Methanol systems include an integrated “Boost Safe” output feature that monitors the entire injection system and triggers a ground signal via an output if it detects a voltage-related error (short, bad connection, broken wire, overheated pump, high or low voltage signal, etc.), allowing users to define their failsafe strategy from something as simple as flashing a warning light to more advanced strategies like pulling boost or ignition, or switching fuel maps on a standalone engine management system. Combined with the integral and highly accurate conductive low-fluid switch in the tank, “Boost Safe” can also put your engine in safe mode before the system runs dry. This exclusive feature is found only on AEM Water\/Methanol Injection Systems.\u003cbr\u003e\n\u003cbr\u003e\nHeavy-Duty High Pressure Injection Pump\u003cbr\u003e\nAEM’s internally-bypassed water\/methanol injection pump does not cycle on and off and provides quiet, smooth operation. It features robust construction including integral hose fittings, EPDM seals and a Santoprene diaphragm that provides consistent and reliable fluid delivery.\u003cbr\u003e\n\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/aem-water-methanol-injection-200psi-pump_1.jpg?v=1514052643\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\nLow-Profile 1.15 Gallon Tank\u003cbr\u003e\nAEM’s gas Water\/Methanol Injection Systems are available with or without a compact 1.15 gallon tank that features an anti-starvation reservoir. A more accurate, conductive low level fluid sensor is integrated into the tank and features a positive lock connector with color-matched wires to the wiring harness. The sensor eliminates any chance of incorrect readings due to interference from debris.\u003cbr\u003e\n\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/AEM_watermethanol_lowfluidsensor.jpg?v=1514052717\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\nMachined Billet Injectors and Nozzles\u003cbr\u003e\nAEM includes one precision-machined billet injector in its gasoline Water\/Methanol Injection kit. It features an integral check valve to prevent unintended fluid flow. Three billet injector nozzles are included for matching water\/methanol flow to an engine’s horsepower output. Click the link for a Nozzle Flow Guide graph.\u003cbr\u003e\n\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/aem-water-methanol-injection-nozzle.jpg?v=1514052791\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\nRevised Flow Control Strategy for More Linear Fluid Delivery\u003cbr\u003e\nAEM’s engineers spent extensive time revamping the controller’s flow control strategy for a more linear flow output delivery. This means that the flow delivery better matches an engine’s need for water\/methanol injection, which further optimizes charge air cooling and detonation control.\u003cbr\u003e\n\u003cbr\u003e\nBoost Dependent and Multi-Input (0-5v\/frequency) progressive controller designs feature large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test button for enhanced splash resistance and mounting tabs\nWiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, integrated pump ground circuit and additional wire for optional on\/off fluid solenoid\u003cbr\u003e\n“Boost Safe” failsafe output included (for complete failsafe under all conditions, see our Water\/Methanol Failsafe Device)\u003cbr\u003e\nHeavy-duty high-pressure injection pump features integral fittings, a Santoprene diaphragm and EPDM seals to resist corrosion. Our pump maximizes line pressure for optimum atomization and its quiet, smooth operation is almost undetectable\u003cbr\u003e\nPrecision-machined billet-aluminum injector with integral check valve\u003cbr\u003e\nThree interchangeable injector nozzles to cover a wide variety of HP levels (250cc\/min, 500 cc\/min \u0026amp; 1,000cc\/min)\u003cbr\u003e\n1.15 gallon tank with anti-starvation reservoir, integral conductive low-fluid sensor and positive lock connector (tank-less systems available)\u003cbr\u003e\n20 feet of injection tubing included\u003cbr\u003e\nLED dash light for system status and low fluid warning\u003cbr\u003e\u003cbr\u003eMonitor the methanol flow and avoid engine damage with the methanol flow gauges \u003ca href=\"https:\/\/rzcrewgarage.com\/collections\/display-gauges-panels\/aem-electronics\"\u003ehere\u003c\/a\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eWater\/Methanol Injection Advantages for Gas Engines:\u003cbr\u003e\n\u003cbr\u003e\nReduces Air Inlet Charge Temps\u003cbr\u003e\nThe term “liquid intercooling” with water\/methanol injection refers to a highly atomized mist of water\/methanol that is injected into the airstream and begins to evaporate. As it does, this evaporative effect reduces air charge temps by as much as 100 degrees, and delivers a more oxygen-rich air charge.\u003cbr\u003e\n\u003cbr\u003e\nReduces Detonation (Knock)\u003cbr\u003e\nWater absorbs heat, and methanol is a cool burning, anti-knock rated fuel. When combined and introduced into the inlet stream, they can effectively increase your vehicle’s anti-knock index so you can reliably increase boost pressure and advance ignition timing using pump gas.\u003cbr\u003e\n\u003cbr\u003e\nReduces Carbon Deposits\u003cbr\u003e\nModern vehicles fitted with Exhaust Gas Recirculation (EGR) devices for emissions control promote heavy carbon build up inside the air intake. This carbon build-up can create ‘hot spots’ in the combustion chambers that can cause detonation. Water\/methanol injection has a ‘steam cleaning’ effect that reduces this carbon build up, and in some cases can increase fuel economy.\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/Water-Meth-Diagram-Gas_0.jpg?v=1514053008\" alt=\"\"\u003e"}

{"id":4398777761889,"title":"AEM Electronics - V2 Water\/Methanol Injection Kit - Multi Input - For MAF, MAP, 0-5V or IDC","handle":"aem-electronics-v2-water-methanol-injection-kit-multi-input-for-maf-map-0-5v-or-idc","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: AEM Electronics\u003cbr\u003ePart Number: 30-3350\u003cbr\u003eRacers with high compression naturally aspirated engines or boosted engines who are looking for an alternative to boost dependent water\/methanol injection controllers have a solution in AEM's Multi-Input WMI controller. The multiple input design enables users to install AEM’s Water\/Methanol Injection Kit on both high compression naturally aspirated vehicles (NA) via the MAF\/IDC settings and ultra-high boost vehicles (above 35 PSI) using an external MAP sensor. The Multi-Input controller works with an external 0-5v voltage-based external MAP sensor, a frequency based input for Injector Duty Cycle (IDC), frequency-based mass airflow (MAF), or a 0-5v voltage-based MAF.\u003cbr\u003e\u003cbr\u003eThis kit includes a one-gallon tank kit with a single injector for gas engines\u003cbr\u003e\u003cbr\u003e\nThe AEM Water\/Methanol Injection System Advantage\u003cbr\u003e\nWater\/methanol injection for gas engines is a proven means for effectively reducing engine inlet air temperatures and suppressing harmful detonation on forced induction and high compression naturally aspirated (NA) race engines. This allows racers to reliably increase boost and advance ignition timing—without using high-octane racing fuel—for power gains of up to 20%. AEM’s Water\/Methanol Injection Systems utilize the most robust hardware combined with more advanced features than any other comparably priced water\/methanol system.\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e\u003cbr\u003e\nRobust, Easy to Use Controller Designs\u003cbr\u003e\nThe new controller designs feature large, turn-resistant knobs and larger numbering to easily set accurate start and full activation points, with covered status LED and test buttons for added splash resistance. A plug is integrated into the controller housing for mating to the redesigned wiring harness’s positive-lock connector. The Boost Dependent controller housing has a molded-in, barbed nipple to accept a boost hose and a wiring legend on the back. Both controller housings feature an easy to access integrated fuse and molded mounting tabs.\u003cbr\u003e\n\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/aem-water-methanol-controller-internal-boost-sensor.jpg?v=1514052322\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\nSimplified Wiring\u003cbr\u003e\nAEM’s Water\/Methanol Injection kit’s wiring harness is terminated with a positive-lock connector on one end and has color-coded wires to ease installation. Both the power and ground wires for the pump are included in the harness which simplifies the wiring process and eliminates any chance of the pump accidentally activating from a short in the system. An additional wire is included for adding an optional on\/off solenoid to stop fluid flow when the system is inactive.\u003cbr\u003e\n\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/aem-water-methanol-injection-controller-plug.jpg?v=1514052538\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\nIntegrated Boost Safe Feature\u003cbr\u003e\nThe controllers in AEM’s Water Methanol systems include an integrated “Boost Safe” output feature that monitors the entire injection system and triggers a ground signal via an output if it detects a voltage-related error (short, bad connection, broken wire, overheated pump, high or low voltage signal, etc.), allowing users to define their failsafe strategy from something as simple as flashing a warning light to more advanced strategies like pulling boost or ignition, or switching fuel maps on a standalone engine management system. Combined with the integral and highly accurate conductive low-fluid switch in the tank, “Boost Safe” can also put your engine in safe mode before the system runs dry. This exclusive feature is found only on AEM Water\/Methanol Injection Systems.\u003cbr\u003e\n\u003cbr\u003e\nHeavy-Duty High Pressure Injection Pump\u003cbr\u003e\nAEM’s internally-bypassed water\/methanol injection pump does not cycle on and off and provides quiet, smooth operation. It features robust construction including integral hose fittings, EPDM seals and a Santoprene diaphragm that provides consistent and reliable fluid delivery.\u003cbr\u003e\n\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/aem-water-methanol-injection-200psi-pump_1.jpg?v=1514052643\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\nLow-Profile 1.15 Gallon Tank\u003cbr\u003e\nAEM’s gas Water\/Methanol Injection Systems are available with or without a compact 1.15 gallon tank that features an anti-starvation reservoir. A more accurate, conductive low level fluid sensor is integrated into the tank and features a positive lock connector with color-matched wires to the wiring harness. The sensor eliminates any chance of incorrect readings due to interference from debris.\u003cbr\u003e\n\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/AEM_watermethanol_lowfluidsensor.jpg?v=1514052717\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\nMachined Billet Injectors and Nozzles\u003cbr\u003e\nAEM includes one precision-machined billet injector in its gasoline Water\/Methanol Injection kit. It features an integral check valve to prevent unintended fluid flow. Three billet injector nozzles are included for matching water\/methanol flow to an engine’s horsepower output. Click the link for a Nozzle Flow Guide graph.\u003cbr\u003e\n\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/aem-water-methanol-injection-nozzle.jpg?v=1514052791\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\nRevised Flow Control Strategy for More Linear Fluid Delivery\u003cbr\u003e\nAEM’s engineers spent extensive time revamping the controller’s flow control strategy for a more linear flow output delivery. This means that the flow delivery better matches an engine’s need for water\/methanol injection, which further optimizes charge air cooling and detonation control.\u003cbr\u003e\u003cbr\u003eMonitor the methanol flow and avoid engine damage with the methanol flow gauges \u003ca href=\"https:\/\/rzcrewgarage.com\/collections\/display-gauges-panels\/aem-electronics\"\u003ehere\u003c\/a\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eWater\/Methanol Injection Advantages for Gas Engines:\u003cbr\u003e\n\u003cbr\u003e\nReduces Air Inlet Charge Temps\u003cbr\u003e\nThe term “liquid intercooling” with water\/methanol injection refers to a highly atomized mist of water\/methanol that is injected into the airstream and begins to evaporate. As it does, this evaporative effect reduces air charge temps by as much as 100 degrees, and delivers a more oxygen-rich air charge.\u003cbr\u003e\n\u003cbr\u003e\nReduces Detonation (Knock)\u003cbr\u003e\nWater absorbs heat, and methanol is a cool burning, anti-knock rated fuel. When combined and introduced into the inlet stream, they can effectively increase your vehicle’s anti-knock index so you can reliably increase boost pressure and advance ignition timing using pump gas.\u003cbr\u003e\n\u003cbr\u003e\nReduces Carbon Deposits\u003cbr\u003e\nModern vehicles fitted with Exhaust Gas Recirculation (EGR) devices for emissions control promote heavy carbon build up inside the air intake. This carbon build-up can create ‘hot spots’ in the combustion chambers that can cause detonation. Water\/methanol injection has a ‘steam cleaning’ effect that reduces this carbon build up, and in some cases can increase fuel economy.\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/Water-Meth-Diagram-Gas_0.jpg?v=1514053008\" alt=\"\"\u003e","published_at":"2019-11-30T21:30:39+08:00","created_at":"2019-11-30T21:30:41+08:00","vendor":"AEM Electronics","type":"Methanol Kits","tags":["1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","aem-electronics","civic-fd2-2007-2010-na-k20z2-i4","methanol-kits","na-engine-kits","Universal","us1","ws112"],"price":69600,"price_min":69600,"price_max":69600,"available":true,"price_varies":false,"compare_at_price":72100,"compare_at_price_min":72100,"compare_at_price_max":72100,"compare_at_price_varies":false,"variants":[{"id":31417797836897,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"30-3350","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"AEM Electronics - V2 Water\/Methanol Injection Kit - Multi Input - For MAF, MAP, 0-5V or IDC","public_title":null,"options":["Default Title"],"price":69600,"weight":9035,"compare_at_price":72100,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/30-3350_9355f83f-e3a3-440c-b96d-73dbb8c32882.jpg?v=1710190329"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/30-3350_9355f83f-e3a3-440c-b96d-73dbb8c32882.jpg?v=1710190329","options":["Title"],"media":[{"alt":"AEM Electronics - V2 Water\/Methanol Injection Kit - Multi Input - For MAF, MAP, 0-5V or IDC - RZCrewGarage","id":22904222875830,"position":1,"preview_image":{"aspect_ratio":1.579,"height":266,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/30-3350_9355f83f-e3a3-440c-b96d-73dbb8c32882.jpg?v=1710190329"},"aspect_ratio":1.579,"height":266,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/30-3350_9355f83f-e3a3-440c-b96d-73dbb8c32882.jpg?v=1710190329","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: AEM Electronics\u003cbr\u003ePart Number: 30-3350\u003cbr\u003eRacers with high compression naturally aspirated engines or boosted engines who are looking for an alternative to boost dependent water\/methanol injection controllers have a solution in AEM's Multi-Input WMI controller. The multiple input design enables users to install AEM’s Water\/Methanol Injection Kit on both high compression naturally aspirated vehicles (NA) via the MAF\/IDC settings and ultra-high boost vehicles (above 35 PSI) using an external MAP sensor. The Multi-Input controller works with an external 0-5v voltage-based external MAP sensor, a frequency based input for Injector Duty Cycle (IDC), frequency-based mass airflow (MAF), or a 0-5v voltage-based MAF.\u003cbr\u003e\u003cbr\u003eThis kit includes a one-gallon tank kit with a single injector for gas engines\u003cbr\u003e\u003cbr\u003e\nThe AEM Water\/Methanol Injection System Advantage\u003cbr\u003e\nWater\/methanol injection for gas engines is a proven means for effectively reducing engine inlet air temperatures and suppressing harmful detonation on forced induction and high compression naturally aspirated (NA) race engines. This allows racers to reliably increase boost and advance ignition timing—without using high-octane racing fuel—for power gains of up to 20%. AEM’s Water\/Methanol Injection Systems utilize the most robust hardware combined with more advanced features than any other comparably priced water\/methanol system.\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e\u003cbr\u003e\nRobust, Easy to Use Controller Designs\u003cbr\u003e\nThe new controller designs feature large, turn-resistant knobs and larger numbering to easily set accurate start and full activation points, with covered status LED and test buttons for added splash resistance. A plug is integrated into the controller housing for mating to the redesigned wiring harness’s positive-lock connector. The Boost Dependent controller housing has a molded-in, barbed nipple to accept a boost hose and a wiring legend on the back. Both controller housings feature an easy to access integrated fuse and molded mounting tabs.\u003cbr\u003e\n\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/aem-water-methanol-controller-internal-boost-sensor.jpg?v=1514052322\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\nSimplified Wiring\u003cbr\u003e\nAEM’s Water\/Methanol Injection kit’s wiring harness is terminated with a positive-lock connector on one end and has color-coded wires to ease installation. Both the power and ground wires for the pump are included in the harness which simplifies the wiring process and eliminates any chance of the pump accidentally activating from a short in the system. An additional wire is included for adding an optional on\/off solenoid to stop fluid flow when the system is inactive.\u003cbr\u003e\n\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/aem-water-methanol-injection-controller-plug.jpg?v=1514052538\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\nIntegrated Boost Safe Feature\u003cbr\u003e\nThe controllers in AEM’s Water Methanol systems include an integrated “Boost Safe” output feature that monitors the entire injection system and triggers a ground signal via an output if it detects a voltage-related error (short, bad connection, broken wire, overheated pump, high or low voltage signal, etc.), allowing users to define their failsafe strategy from something as simple as flashing a warning light to more advanced strategies like pulling boost or ignition, or switching fuel maps on a standalone engine management system. Combined with the integral and highly accurate conductive low-fluid switch in the tank, “Boost Safe” can also put your engine in safe mode before the system runs dry. This exclusive feature is found only on AEM Water\/Methanol Injection Systems.\u003cbr\u003e\n\u003cbr\u003e\nHeavy-Duty High Pressure Injection Pump\u003cbr\u003e\nAEM’s internally-bypassed water\/methanol injection pump does not cycle on and off and provides quiet, smooth operation. It features robust construction including integral hose fittings, EPDM seals and a Santoprene diaphragm that provides consistent and reliable fluid delivery.\u003cbr\u003e\n\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/aem-water-methanol-injection-200psi-pump_1.jpg?v=1514052643\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\nLow-Profile 1.15 Gallon Tank\u003cbr\u003e\nAEM’s gas Water\/Methanol Injection Systems are available with or without a compact 1.15 gallon tank that features an anti-starvation reservoir. A more accurate, conductive low level fluid sensor is integrated into the tank and features a positive lock connector with color-matched wires to the wiring harness. The sensor eliminates any chance of incorrect readings due to interference from debris.\u003cbr\u003e\n\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/AEM_watermethanol_lowfluidsensor.jpg?v=1514052717\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\nMachined Billet Injectors and Nozzles\u003cbr\u003e\nAEM includes one precision-machined billet injector in its gasoline Water\/Methanol Injection kit. It features an integral check valve to prevent unintended fluid flow. Three billet injector nozzles are included for matching water\/methanol flow to an engine’s horsepower output. Click the link for a Nozzle Flow Guide graph.\u003cbr\u003e\n\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/aem-water-methanol-injection-nozzle.jpg?v=1514052791\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\nRevised Flow Control Strategy for More Linear Fluid Delivery\u003cbr\u003e\nAEM’s engineers spent extensive time revamping the controller’s flow control strategy for a more linear flow output delivery. This means that the flow delivery better matches an engine’s need for water\/methanol injection, which further optimizes charge air cooling and detonation control.\u003cbr\u003e\u003cbr\u003eMonitor the methanol flow and avoid engine damage with the methanol flow gauges \u003ca href=\"https:\/\/rzcrewgarage.com\/collections\/display-gauges-panels\/aem-electronics\"\u003ehere\u003c\/a\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eWater\/Methanol Injection Advantages for Gas Engines:\u003cbr\u003e\n\u003cbr\u003e\nReduces Air Inlet Charge Temps\u003cbr\u003e\nThe term “liquid intercooling” with water\/methanol injection refers to a highly atomized mist of water\/methanol that is injected into the airstream and begins to evaporate. As it does, this evaporative effect reduces air charge temps by as much as 100 degrees, and delivers a more oxygen-rich air charge.\u003cbr\u003e\n\u003cbr\u003e\nReduces Detonation (Knock)\u003cbr\u003e\nWater absorbs heat, and methanol is a cool burning, anti-knock rated fuel. When combined and introduced into the inlet stream, they can effectively increase your vehicle’s anti-knock index so you can reliably increase boost pressure and advance ignition timing using pump gas.\u003cbr\u003e\n\u003cbr\u003e\nReduces Carbon Deposits\u003cbr\u003e\nModern vehicles fitted with Exhaust Gas Recirculation (EGR) devices for emissions control promote heavy carbon build up inside the air intake. This carbon build-up can create ‘hot spots’ in the combustion chambers that can cause detonation. Water\/methanol injection has a ‘steam cleaning’ effect that reduces this carbon build up, and in some cases can increase fuel economy.\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/Water-Meth-Diagram-Gas_0.jpg?v=1514053008\" alt=\"\"\u003e"}

{"id":4398777663585,"title":"AEM Electronics - V2 Water\/Methanol Injection Kit - Multi Input - For Naturally Aspirated Gasoline Engines","handle":"aem-electronics-v2-water-methanol-injection-kit-multi-input-for-naturally-aspirated-gasoline-engines","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: AEM Electronics\u003cbr\u003ePart Number: 30-3350\u003cbr\u003eThe AEM Water\/Methanol Injection System Advantage\u003cbr\u003e\nWater\/methanol injection for gas engines is a proven means for effectively reducing engine inlet air temperatures and suppressing harmful detonation on high compression naturally aspirated (NA) race engines. This allows racers to reliably increase boost and advance ignition timing—without using high-octane racing fuel—for improved power gains. AEM’s Water\/Methanol Injection Systems utilize the most robust hardware combined with more advanced features than any other comparably priced water\/methanol system.\n\u003cbr\u003e\u003cbr\u003e\nAEM's Multi Input controller design enables users to install Water\/Methanol Injection on high compression naturally aspirated vehicles (NA) via the MAF\/IDC settings. The Multi-Input controller works with an external 0-5v voltage-based external MAP sensor, a frequency based input for Injector Duty Cycle (IDC), frequency-based mass airflow (MAF), or a 0-5v voltage-based MAF.\u003cbr\u003e\u003cbr\u003e\nFeatures:\u003cbr\u003e\u003cbr\u003e\nRobust, Easy to Use Controller Designs\u003cbr\u003e\nThe new controller designs feature large, turn-resistant knobs and larger numbering to easily set accurate start and full activation points, with covered status LED and test buttons for added splash resistance. A plug is integrated into the controller housing for mating to the redesigned wiring harness’s positive-lock connector. The Boost Dependent controller housing has a molded-in, barbed nipple to accept a boost hose and a wiring legend on the back. Both controller housings feature an easy to access integrated fuse and molded mounting tabs.\u003cbr\u003e\n\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/aem-water-methanol-controller-internal-boost-sensor.jpg?v=1514052322\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\nSimplified Wiring\u003cbr\u003e\nAEM’s Water\/Methanol Injection kit’s wiring harness is terminated with a positive-lock connector on one end and has color-coded wires to ease installation. Both the power and ground wires for the pump are included in the harness which simplifies the wiring process and eliminates any chance of the pump accidentally activating from a short in the system. An additional wire is included for adding an optional on\/off solenoid to stop fluid flow when the system is inactive.\u003cbr\u003e\n\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/aem-water-methanol-injection-controller-plug.jpg?v=1514052538\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\nIntegrated Boost Safe Feature\u003cbr\u003e\nThe controllers in AEM’s Water Methanol systems include an integrated “Boost Safe” output feature that monitors the entire injection system and triggers a ground signal via an output if it detects a voltage-related error (short, bad connection, broken wire, overheated pump, high or low voltage signal, etc.), allowing users to define their failsafe strategy from something as simple as flashing a warning light to more advanced strategies like pulling boost or ignition, or switching fuel maps on a standalone engine management system. Combined with the integral and highly accurate conductive low-fluid switch in the tank, “Boost Safe” can also put your engine in safe mode before the system runs dry. This exclusive feature is found only on AEM Water\/Methanol Injection Systems.\u003cbr\u003e\n\u003cbr\u003e\nHeavy-Duty High Pressure Injection Pump\u003cbr\u003e\nAEM’s internally-bypassed water\/methanol injection pump does not cycle on and off and provides quiet, smooth operation. It features robust construction including integral hose fittings, EPDM seals and a Santoprene diaphragm that provides consistent and reliable fluid delivery.\u003cbr\u003e\n\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/aem-water-methanol-injection-200psi-pump_1.jpg?v=1514052643\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\nLow-Profile 1.15 Gallon Tank\u003cbr\u003e\nAEM’s gas Water\/Methanol Injection Systems are available with or without a compact 1.15 gallon tank that features an anti-starvation reservoir. A more accurate, conductive low level fluid sensor is integrated into the tank and features a positive lock connector with color-matched wires to the wiring harness. The sensor eliminates any chance of incorrect readings due to interference from debris.\u003cbr\u003e\n\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/AEM_watermethanol_lowfluidsensor.jpg?v=1514052717\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\nMachined Billet Injectors and Nozzles\u003cbr\u003e\nAEM includes one precision-machined billet injector in its gasoline Water\/Methanol Injection kit. It features an integral check valve to prevent unintended fluid flow. Three billet injector nozzles are included for matching water\/methanol flow to an engine’s horsepower output. Click the link for a Nozzle Flow Guide graph.\u003cbr\u003e\n\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/aem-water-methanol-injection-nozzle.jpg?v=1514052791\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\nRevised Flow Control Strategy for More Linear Fluid Delivery\u003cbr\u003e\nAEM’s engineers spent extensive time revamping the controller’s flow control strategy for a more linear flow output delivery. This means that the flow delivery better matches an engine’s need for water\/methanol injection, which further optimizes charge air cooling and detonation control.\u003cbr\u003e\n\u003cbr\u003e\nBoost Dependent and Multi-Input (0-5v\/frequency) progressive controller designs feature large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test button for enhanced splash resistance and mounting tabs\nWiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, integrated pump ground circuit and additional wire for optional on\/off fluid solenoid\u003cbr\u003e\n“Boost Safe” failsafe output included (for complete failsafe under all conditions, see our Water\/Methanol Failsafe Device)\u003cbr\u003e\nHeavy-duty high-pressure injection pump features integral fittings, a Santoprene diaphragm and EPDM seals to resist corrosion. Our pump maximizes line pressure for optimum atomization and its quiet, smooth operation is almost undetectable\u003cbr\u003e\nPrecision-machined billet-aluminum injector with integral check valve\u003cbr\u003e\nThree interchangeable injector nozzles to cover a wide variety of HP levels (250cc\/min, 500 cc\/min \u0026amp; 1,000cc\/min)\u003cbr\u003e\n1.15 gallon tank with anti-starvation reservoir, integral conductive low-fluid sensor and positive lock connector (tank-less systems available)\u003cbr\u003e\n20 feet of injection tubing included\u003cbr\u003e\nLED dash light for system status and low fluid warning\u003cbr\u003e\u003cbr\u003eMonitor the methanol flow and avoid engine damage with the methanol flow gauges \u003ca href=\"https:\/\/rzcrewgarage.com\/collections\/display-gauges-panels\/aem-electronics\"\u003ehere\u003c\/a\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eWater\/Methanol Injection Advantages for Gas Engines:\u003cbr\u003e\n\u003cbr\u003e\nReduces Air Inlet Charge Temps\u003cbr\u003e\nThe term “liquid intercooling” with water\/methanol injection refers to a highly atomized mist of water\/methanol that is injected into the airstream and begins to evaporate. As it does, this evaporative effect reduces air charge temps by as much as 100 degrees, and delivers a more oxygen-rich air charge.\u003cbr\u003e\n\u003cbr\u003e\nReduces Detonation (Knock)\u003cbr\u003e\nWater absorbs heat, and methanol is a cool burning, anti-knock rated fuel. When combined and introduced into the inlet stream, they can effectively increase your vehicle’s anti-knock index so you can reliably increase boost pressure and advance ignition timing using pump gas.\u003cbr\u003e\n\u003cbr\u003e\nReduces Carbon Deposits\u003cbr\u003e\nModern vehicles fitted with Exhaust Gas Recirculation (EGR) devices for emissions control promote heavy carbon build up inside the air intake. This carbon build-up can create ‘hot spots’ in the combustion chambers that can cause detonation. Water\/methanol injection has a ‘steam cleaning’ effect that reduces this carbon build up, and in some cases can increase fuel economy.\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/AEM-Water-Meth-Diagram-NA.jpg?v=1514053153\" alt=\"\"\u003e","published_at":"2019-11-30T21:30:37+08:00","created_at":"2019-11-30T21:30:38+08:00","vendor":"AEM Electronics","type":"Methanol Kits","tags":["1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","aem-electronics","civic-fd2-2007-2010-na-k20z2-i4","methanol-kits","na-engine-kits","Universal","us1","ws112"],"price":69600,"price_min":69600,"price_max":69600,"available":true,"price_varies":false,"compare_at_price":72100,"compare_at_price_min":72100,"compare_at_price_max":72100,"compare_at_price_varies":false,"variants":[{"id":31417797804129,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"30-3350","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"AEM Electronics - V2 Water\/Methanol Injection Kit - Multi Input - For Naturally Aspirated Gasoline Engines","public_title":null,"options":["Default Title"],"price":69600,"weight":9035,"compare_at_price":72100,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/30-3350.jpg?v=1710190329"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/30-3350.jpg?v=1710190329","options":["Title"],"media":[{"alt":"AEM Electronics - V2 Water\/Methanol Injection Kit - Multi Input - For Naturally Aspirated Gasoline Engines - RZCrewGarage","id":22904222810294,"position":1,"preview_image":{"aspect_ratio":1.579,"height":266,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/30-3350.jpg?v=1710190329"},"aspect_ratio":1.579,"height":266,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/30-3350.jpg?v=1710190329","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: AEM Electronics\u003cbr\u003ePart Number: 30-3350\u003cbr\u003eThe AEM Water\/Methanol Injection System Advantage\u003cbr\u003e\nWater\/methanol injection for gas engines is a proven means for effectively reducing engine inlet air temperatures and suppressing harmful detonation on high compression naturally aspirated (NA) race engines. This allows racers to reliably increase boost and advance ignition timing—without using high-octane racing fuel—for improved power gains. AEM’s Water\/Methanol Injection Systems utilize the most robust hardware combined with more advanced features than any other comparably priced water\/methanol system.\n\u003cbr\u003e\u003cbr\u003e\nAEM's Multi Input controller design enables users to install Water\/Methanol Injection on high compression naturally aspirated vehicles (NA) via the MAF\/IDC settings. The Multi-Input controller works with an external 0-5v voltage-based external MAP sensor, a frequency based input for Injector Duty Cycle (IDC), frequency-based mass airflow (MAF), or a 0-5v voltage-based MAF.\u003cbr\u003e\u003cbr\u003e\nFeatures:\u003cbr\u003e\u003cbr\u003e\nRobust, Easy to Use Controller Designs\u003cbr\u003e\nThe new controller designs feature large, turn-resistant knobs and larger numbering to easily set accurate start and full activation points, with covered status LED and test buttons for added splash resistance. A plug is integrated into the controller housing for mating to the redesigned wiring harness’s positive-lock connector. The Boost Dependent controller housing has a molded-in, barbed nipple to accept a boost hose and a wiring legend on the back. Both controller housings feature an easy to access integrated fuse and molded mounting tabs.\u003cbr\u003e\n\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/aem-water-methanol-controller-internal-boost-sensor.jpg?v=1514052322\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\nSimplified Wiring\u003cbr\u003e\nAEM’s Water\/Methanol Injection kit’s wiring harness is terminated with a positive-lock connector on one end and has color-coded wires to ease installation. Both the power and ground wires for the pump are included in the harness which simplifies the wiring process and eliminates any chance of the pump accidentally activating from a short in the system. An additional wire is included for adding an optional on\/off solenoid to stop fluid flow when the system is inactive.\u003cbr\u003e\n\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/aem-water-methanol-injection-controller-plug.jpg?v=1514052538\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\nIntegrated Boost Safe Feature\u003cbr\u003e\nThe controllers in AEM’s Water Methanol systems include an integrated “Boost Safe” output feature that monitors the entire injection system and triggers a ground signal via an output if it detects a voltage-related error (short, bad connection, broken wire, overheated pump, high or low voltage signal, etc.), allowing users to define their failsafe strategy from something as simple as flashing a warning light to more advanced strategies like pulling boost or ignition, or switching fuel maps on a standalone engine management system. Combined with the integral and highly accurate conductive low-fluid switch in the tank, “Boost Safe” can also put your engine in safe mode before the system runs dry. This exclusive feature is found only on AEM Water\/Methanol Injection Systems.\u003cbr\u003e\n\u003cbr\u003e\nHeavy-Duty High Pressure Injection Pump\u003cbr\u003e\nAEM’s internally-bypassed water\/methanol injection pump does not cycle on and off and provides quiet, smooth operation. It features robust construction including integral hose fittings, EPDM seals and a Santoprene diaphragm that provides consistent and reliable fluid delivery.\u003cbr\u003e\n\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/aem-water-methanol-injection-200psi-pump_1.jpg?v=1514052643\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\nLow-Profile 1.15 Gallon Tank\u003cbr\u003e\nAEM’s gas Water\/Methanol Injection Systems are available with or without a compact 1.15 gallon tank that features an anti-starvation reservoir. A more accurate, conductive low level fluid sensor is integrated into the tank and features a positive lock connector with color-matched wires to the wiring harness. The sensor eliminates any chance of incorrect readings due to interference from debris.\u003cbr\u003e\n\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/AEM_watermethanol_lowfluidsensor.jpg?v=1514052717\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\nMachined Billet Injectors and Nozzles\u003cbr\u003e\nAEM includes one precision-machined billet injector in its gasoline Water\/Methanol Injection kit. It features an integral check valve to prevent unintended fluid flow. Three billet injector nozzles are included for matching water\/methanol flow to an engine’s horsepower output. Click the link for a Nozzle Flow Guide graph.\u003cbr\u003e\n\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/aem-water-methanol-injection-nozzle.jpg?v=1514052791\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\nRevised Flow Control Strategy for More Linear Fluid Delivery\u003cbr\u003e\nAEM’s engineers spent extensive time revamping the controller’s flow control strategy for a more linear flow output delivery. This means that the flow delivery better matches an engine’s need for water\/methanol injection, which further optimizes charge air cooling and detonation control.\u003cbr\u003e\n\u003cbr\u003e\nBoost Dependent and Multi-Input (0-5v\/frequency) progressive controller designs feature large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test button for enhanced splash resistance and mounting tabs\nWiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, integrated pump ground circuit and additional wire for optional on\/off fluid solenoid\u003cbr\u003e\n“Boost Safe” failsafe output included (for complete failsafe under all conditions, see our Water\/Methanol Failsafe Device)\u003cbr\u003e\nHeavy-duty high-pressure injection pump features integral fittings, a Santoprene diaphragm and EPDM seals to resist corrosion. Our pump maximizes line pressure for optimum atomization and its quiet, smooth operation is almost undetectable\u003cbr\u003e\nPrecision-machined billet-aluminum injector with integral check valve\u003cbr\u003e\nThree interchangeable injector nozzles to cover a wide variety of HP levels (250cc\/min, 500 cc\/min \u0026amp; 1,000cc\/min)\u003cbr\u003e\n1.15 gallon tank with anti-starvation reservoir, integral conductive low-fluid sensor and positive lock connector (tank-less systems available)\u003cbr\u003e\n20 feet of injection tubing included\u003cbr\u003e\nLED dash light for system status and low fluid warning\u003cbr\u003e\u003cbr\u003eMonitor the methanol flow and avoid engine damage with the methanol flow gauges \u003ca href=\"https:\/\/rzcrewgarage.com\/collections\/display-gauges-panels\/aem-electronics\"\u003ehere\u003c\/a\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eWater\/Methanol Injection Advantages for Gas Engines:\u003cbr\u003e\n\u003cbr\u003e\nReduces Air Inlet Charge Temps\u003cbr\u003e\nThe term “liquid intercooling” with water\/methanol injection refers to a highly atomized mist of water\/methanol that is injected into the airstream and begins to evaporate. As it does, this evaporative effect reduces air charge temps by as much as 100 degrees, and delivers a more oxygen-rich air charge.\u003cbr\u003e\n\u003cbr\u003e\nReduces Detonation (Knock)\u003cbr\u003e\nWater absorbs heat, and methanol is a cool burning, anti-knock rated fuel. When combined and introduced into the inlet stream, they can effectively increase your vehicle’s anti-knock index so you can reliably increase boost pressure and advance ignition timing using pump gas.\u003cbr\u003e\n\u003cbr\u003e\nReduces Carbon Deposits\u003cbr\u003e\nModern vehicles fitted with Exhaust Gas Recirculation (EGR) devices for emissions control promote heavy carbon build up inside the air intake. This carbon build-up can create ‘hot spots’ in the combustion chambers that can cause detonation. Water\/methanol injection has a ‘steam cleaning’ effect that reduces this carbon build up, and in some cases can increase fuel economy.\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/AEM-Water-Meth-Diagram-NA.jpg?v=1514053153\" alt=\"\"\u003e"}

{"id":4398778646625,"title":"Snow Performance Stage 2 Boost Cooler Water-Methanol Injection Kit for NA applications - Nylon Lines\/Braided Lines","handle":"snow-performance-stage-2-boost-cooler-water-methanol-injection-kit-for-na-applications-nylon-lines-braided-lines","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Snow Performance\u003cbr\u003ePart Number: SNO-212\u003cbr\u003eThe Snow Performance Stage 2 MAF\/MAP water methanol injection kit is designed for all naturally aspirated or forced induction vehicles utilizing a Mass Air Flow (MAF) or Manifold Absolute Pressure (MAP) sensor. The Stage 2 utilizes a progressive controller that proportionally injects more or less water methanol according to MAF\/MAP output. Start and full points are adjustable to match what the engine requires. Proportionality injecting according to MAF\/MAP output (Air Flow Entering Engine) gives an accurate delivery of water methanol for naturally aspirated vehicles allowing for the greatest octane and cooling enhancement over the widest range. \u003cbr\u003e\u003cbr\u003eThis kit utilizes the only OEM approved water methanol injection pump on the market with proprietary heat flange, twin seals, and custom motor winding to run cooler and longer than the competition. The Extreme Environment™ 300 PSI UHO pump is designed to be in the elements with O-Ring connections that are then sealed and potted at our Colorado facility to ensure no moisture can enter the pump internals. Compare this to pumps that use a pump \"sleeve\". These sleeves will keep moisture around the pump unit leading to corrosion as well as trap heat greatly decrease pump life. The Stage 2 MAF\/MAP comes standard with 100% methanol resistant components using stainless steel, nickel plating, EPDM, and hard anodizing to ensure years of continued use. Tie that in with new Snow Performance ACU-SEAL™ compression fittings for guaranteed leak free operation even when using 100% methanol. \u003cbr\u003e\u003cbr\u003eFeatures: \u003cbr\u003eU.S.A. Made\u003cbr\u003eAdjustable Progressive Water Methanol Engagement \u0026amp; Monitoring\u003cbr\u003eRecommended For All Naturally Aspirated Vehicles With a MAF\/MAP Sensor\u003cbr\u003eSupports 1,000+ HP\u003cbr\u003e100% Methanol Resistant (Stainless Steel, Nickel Plating, Hard Anodizing, EPDM)\u003cbr\u003eSnow Performance Hyper-Sonic™ Water Methanol Nozzle\u003cbr\u003eSnow Performance ACU-SEAL™ Water Methanol Compression Fittings\u003cbr\u003eSnow Performance OEM Approved Extreme Environment™ 300 PSI UHO Water Methanol Pump\u003cbr\u003eSnow Performance Running \"S\" Engraved Low Profile Nozzle Holder\u003cbr\u003eSnow Performance Running \"S\" Engraved Low Profile High Flow Check Valve\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 1 left in stock!\u003c!--split--\u003eUniversal\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2025-04-11T17:38:02+08:00","created_at":"2019-11-30T21:31:43+08:00","vendor":"Snow Performance","type":"Methanol Kits","tags":["1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","civic-fd2-2007-2010-na-k20z2-i4","methanol-kits","na-engine-kits","snow-performance","Universal","us1","ws132"],"price":166620,"price_min":166620,"price_max":166620,"available":true,"price_varies":false,"compare_at_price":213200,"compare_at_price_min":213200,"compare_at_price_max":213200,"compare_at_price_varies":false,"variants":[{"id":31417801637985,"title":"Nylon Lines","option1":"Nylon Lines","option2":null,"option3":null,"sku":"SNO-212","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Snow Performance Stage 2 Boost Cooler Water-Methanol Injection Kit for NA applications - Nylon Lines\/Braided Lines - Nylon Lines","public_title":"Nylon Lines","options":["Nylon Lines"],"price":166620,"weight":10000,"compare_at_price":213200,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31417801670753,"title":"Braided Lines","option1":"Braided Lines","option2":null,"option3":null,"sku":"SNO-212-BRD","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Snow Performance Stage 2 Boost Cooler Water-Methanol Injection Kit for NA applications - Nylon Lines\/Braided Lines - Braided Lines","public_title":"Braided Lines","options":["Braided Lines"],"price":166620,"weight":10000,"compare_at_price":213200,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SNO-212_d8196d7c-2abe-4427-84d0-232c6d68ef66.jpg?v=1710190347","\/\/rzcrewgarage.com\/cdn\/shop\/products\/SNO-212-BRD_1e476486-13f8-4702-8fd2-767056e06c0f.jpg?v=1710190349"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SNO-212_d8196d7c-2abe-4427-84d0-232c6d68ef66.jpg?v=1710190347","options":["Choose Your Lines"],"media":[{"alt":"Snow Performance Stage 2 Boost Cooler Water-Methanol Injection Kit for NA applications - Nylon Lines\/Braided Lines - RZCrewGarage","id":22904226644150,"position":1,"preview_image":{"aspect_ratio":0.89,"height":420,"width":374,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SNO-212_d8196d7c-2abe-4427-84d0-232c6d68ef66.jpg?v=1710190347"},"aspect_ratio":0.89,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SNO-212_d8196d7c-2abe-4427-84d0-232c6d68ef66.jpg?v=1710190347","width":374},{"alt":"Snow Performance Stage 2 Boost Cooler Water-Methanol Injection Kit for NA applications - Nylon Lines\/Braided Lines - RZCrewGarage","id":22904226676918,"position":2,"preview_image":{"aspect_ratio":1.203,"height":349,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SNO-212-BRD_1e476486-13f8-4702-8fd2-767056e06c0f.jpg?v=1710190349"},"aspect_ratio":1.203,"height":349,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SNO-212-BRD_1e476486-13f8-4702-8fd2-767056e06c0f.jpg?v=1710190349","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Snow Performance\u003cbr\u003ePart Number: SNO-212\u003cbr\u003eThe Snow Performance Stage 2 MAF\/MAP water methanol injection kit is designed for all naturally aspirated or forced induction vehicles utilizing a Mass Air Flow (MAF) or Manifold Absolute Pressure (MAP) sensor. The Stage 2 utilizes a progressive controller that proportionally injects more or less water methanol according to MAF\/MAP output. Start and full points are adjustable to match what the engine requires. Proportionality injecting according to MAF\/MAP output (Air Flow Entering Engine) gives an accurate delivery of water methanol for naturally aspirated vehicles allowing for the greatest octane and cooling enhancement over the widest range. \u003cbr\u003e\u003cbr\u003eThis kit utilizes the only OEM approved water methanol injection pump on the market with proprietary heat flange, twin seals, and custom motor winding to run cooler and longer than the competition. The Extreme Environment™ 300 PSI UHO pump is designed to be in the elements with O-Ring connections that are then sealed and potted at our Colorado facility to ensure no moisture can enter the pump internals. Compare this to pumps that use a pump \"sleeve\". These sleeves will keep moisture around the pump unit leading to corrosion as well as trap heat greatly decrease pump life. The Stage 2 MAF\/MAP comes standard with 100% methanol resistant components using stainless steel, nickel plating, EPDM, and hard anodizing to ensure years of continued use. Tie that in with new Snow Performance ACU-SEAL™ compression fittings for guaranteed leak free operation even when using 100% methanol. \u003cbr\u003e\u003cbr\u003eFeatures: \u003cbr\u003eU.S.A. Made\u003cbr\u003eAdjustable Progressive Water Methanol Engagement \u0026amp; Monitoring\u003cbr\u003eRecommended For All Naturally Aspirated Vehicles With a MAF\/MAP Sensor\u003cbr\u003eSupports 1,000+ HP\u003cbr\u003e100% Methanol Resistant (Stainless Steel, Nickel Plating, Hard Anodizing, EPDM)\u003cbr\u003eSnow Performance Hyper-Sonic™ Water Methanol Nozzle\u003cbr\u003eSnow Performance ACU-SEAL™ Water Methanol Compression Fittings\u003cbr\u003eSnow Performance OEM Approved Extreme Environment™ 300 PSI UHO Water Methanol Pump\u003cbr\u003eSnow Performance Running \"S\" Engraved Low Profile Nozzle Holder\u003cbr\u003eSnow Performance Running \"S\" Engraved Low Profile High Flow Check Valve\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 1 left in stock!\u003c!--split--\u003eUniversal\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}