2005

Sort by:
{"id":6252861685942,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Mitsubishi Colt Z21A\/Z22A\/Z23A\/Z24A\/Z25A\/Z26A\/Z27A\/Z28A (2002-2018)","handle":"recaro-japan-base-frame-seat-rail-standard-right-mitsubishi-colt-z21a-z22a-z23a-z24a-z25a-z26a-z27a-z28a-2002-2018-2083-281-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as lowermost OEM seat. (Middle position of 3 position of rail with ST-JJ)Bench seat is unconfirmed.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.For non-side airbag car only. Separate seat car. Cold climate area specification is unconfirmed.\u003cbr\u003e- CS,CSE ,CT,C-classic reclining cover on center console side must be removed. ,seat height is raised due to use of spacers.SR-1,2,SP-#�¯shoulder area andB-Pillar couple mm. interfere.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- CSE : Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- CT: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- C-Classic: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Colt - Z21A (2004-2018) 4A90\u003cbr\u003eMitsubishi - Colt - Z21A (2002-2004) 4A90\u003cbr\u003eMitsubishi - Colt - Z22A (2004-2018) 4A90\u003cbr\u003eMitsubishi - Colt - Z23A (2004-2018) 4A91\u003cbr\u003eMitsubishi - Colt - Z23A (2002-2004) 4A91\u003cbr\u003eMitsubishi - Colt - Z24A (2004-2008) 4A91\u003cbr\u003eMitsubishi - Colt - Z24A (2002-2004) 4A91\u003cbr\u003eMitsubishi - Colt - Z25A (2004-2018) 4G19\u003cbr\u003eMitsubishi - Colt - Z25A (2002-2004) 4G19\u003cbr\u003eMitsubishi - Colt - Z26A (2002-2004) 4G19\u003cbr\u003eMitsubishi - Colt - Z27A (2002-2004) 4G15\u003cbr\u003eMitsubishi - Colt - Z28A (2002-2004) 4G15\u003c!--split--\u003e","published_at":"2021-02-08T18:11:50+08:00","created_at":"2021-02-08T18:11:51+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","colt-z21a-2002-2004-na-4a90-i4","colt-z21a-2004-2018-na-4a90-i4","colt-z22a-2004-2018-na-4a90-i4","colt-z23a-2002-2004-na-4a91-i4","colt-z23a-2004-2018-na-4a91-i4","colt-z24a-2002-2004-na-4a91-i4","colt-z24a-2004-2008-na-4a91-i4","colt-z25a-2002-2004-na-4g19-i4","colt-z25a-2004-2018-na-4g19-i4","colt-z26a-2002-2004-na-4g19-i4","colt-z27a-2002-2004-na-4g15-sohc-i4","colt-z28a-2002-2004-na-4g15-sohc-i4","mitsubishi","recaro-japan","right","seat-rails","ws10"],"price":21600,"price_min":21600,"price_max":21600,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38014278009014,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2083.281.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Mitsubishi Colt Z21A\/Z22A\/Z23A\/Z24A\/Z25A\/Z26A\/Z27A\/Z28A (2002-2018)","public_title":null,"options":["Default Title"],"price":21600,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-mitsubishi-colt-z21az22az23az24az25az26az27az28a-2002-2018-rzcrew.jpg?v=1710330992"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-mitsubishi-colt-z21az22az23az24az25az26az27az28a-2002-2018-rzcrew.jpg?v=1710330992","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Mitsubishi Colt Z21A\/Z22A\/Z23A\/Z24A\/Z25A\/Z26A\/Z27A\/Z28A (2002-2018) - 2083.281.2 - Rzcrewgarage","id":25433084854454,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-mitsubishi-colt-z21az22az23az24az25az26az27az28a-2002-2018-rzcrew.jpg?v=1710330992"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-mitsubishi-colt-z21az22az23az24az25az26az27az28a-2002-2018-rzcrew.jpg?v=1710330992","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as lowermost OEM seat. (Middle position of 3 position of rail with ST-JJ)Bench seat is unconfirmed.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.For non-side airbag car only. Separate seat car. Cold climate area specification is unconfirmed.\u003cbr\u003e- CS,CSE ,CT,C-classic reclining cover on center console side must be removed. ,seat height is raised due to use of spacers.SR-1,2,SP-#�¯shoulder area andB-Pillar couple mm. interfere.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- CSE : Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- CT: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- C-Classic: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Colt - Z21A (2004-2018) 4A90\u003cbr\u003eMitsubishi - Colt - Z21A (2002-2004) 4A90\u003cbr\u003eMitsubishi - Colt - Z22A (2004-2018) 4A90\u003cbr\u003eMitsubishi - Colt - Z23A (2004-2018) 4A91\u003cbr\u003eMitsubishi - Colt - Z23A (2002-2004) 4A91\u003cbr\u003eMitsubishi - Colt - Z24A (2004-2008) 4A91\u003cbr\u003eMitsubishi - Colt - Z24A (2002-2004) 4A91\u003cbr\u003eMitsubishi - Colt - Z25A (2004-2018) 4G19\u003cbr\u003eMitsubishi - Colt - Z25A (2002-2004) 4G19\u003cbr\u003eMitsubishi - Colt - Z26A (2002-2004) 4G19\u003cbr\u003eMitsubishi - Colt - Z27A (2002-2004) 4G15\u003cbr\u003eMitsubishi - Colt - Z28A (2002-2004) 4G15\u003c!--split--\u003e"}
Recaro Japan - Base Frame Seat Rail Standard Right - Mitsubishi Colt Z21A/Z22A/Z23A/Z24A/Z25A/Z26A/Z27A/Z28A (2002-2018) - 2083.281.2 - Rzcrewgarage

Recaro Japan - Base Frame Seat Rail Standard Right - Mitsubishi Colt Z21A/Z22A/Z23A/Z24A/Z25A/Z26A/Z27A/Z28A (2002-2018)

$216.00

SPECIFICATIONSManufacturer: Recaro JapanPosition: RightType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).PRODUCT NOTES:- Seat position: height is same as lowermost OEM seat. (Middle position of 3 position of rail with ST-JJ)Bench seat...


More Info
{"id":6252861391030,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Mitsubishi Outlander CW5W (2005-2012)","handle":"recaro-japan-base-frame-seat-rail-standard-right-mitsubishi-outlander-cw5w-2005-2012-2083-272-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position:10mm lower than OEM seat.(Middle position of 3 position baseframe with ST-JJ)15mm to door from OEM seat.The length of slider is 20mm shorter than OEM seat on front side. The length of slider is 20mm longer than OEM seat on rear side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.For non-side airbag car only.\u003cbr\u003e- Racer,SP-# needs SP-G offset adapter (PN 1600094.CS,CSE ,CT,C-classicuses spacer therefore seat position will be higher.RS\/TS-# series need RS\/TS-G offset adapter(PN 1700001.1700001J is adjustable offset (5mm\/10mm\/15mm).RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE \u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Outlander - CW5W (2010-2012) 4B12\u003cbr\u003eMitsubishi - Outlander - CW5W (2008-2009) 4B12\u003cbr\u003eMitsubishi - Outlander - CW5W (2009-2009) 4B12\u003cbr\u003eMitsubishi - Outlander - CW5W (2005-2007) 4B12\u003cbr\u003eMitsubishi - Outlander - CW5W (2007-2008) 4B12\u003c!--split--\u003e","published_at":"2021-02-08T18:11:45+08:00","created_at":"2021-02-08T18:11:45+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2005","2006","2007","2008","2009","2010","2011","2012","mitsubishi","outlander-cw5w-2005-2007-na-4b12-i4","outlander-cw5w-2007-2008-na-4b12-i4","outlander-cw5w-2008-2009-na-4b12-i4","outlander-cw5w-2009-2010-na-4b12-i4","outlander-cw5w-2010-2012-na-4b12-i4","recaro-japan","right","seat-rails","ws10"],"price":21600,"price_min":21600,"price_max":21600,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38014277517494,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2083.272.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Mitsubishi Outlander CW5W (2005-2012)","public_title":null,"options":["Default Title"],"price":21600,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-mitsubishi-outlander-cw5w-2005-2012-rzcrew.jpg?v=1710330992"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-mitsubishi-outlander-cw5w-2005-2012-rzcrew.jpg?v=1710330992","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Mitsubishi Outlander CW5W (2005-2012) - 2083.272.2 - Rzcrewgarage","id":25433083150518,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-mitsubishi-outlander-cw5w-2005-2012-rzcrew.jpg?v=1710330992"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-mitsubishi-outlander-cw5w-2005-2012-rzcrew.jpg?v=1710330992","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position:10mm lower than OEM seat.(Middle position of 3 position baseframe with ST-JJ)15mm to door from OEM seat.The length of slider is 20mm shorter than OEM seat on front side. The length of slider is 20mm longer than OEM seat on rear side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.For non-side airbag car only.\u003cbr\u003e- Racer,SP-# needs SP-G offset adapter (PN 1600094.CS,CSE ,CT,C-classicuses spacer therefore seat position will be higher.RS\/TS-# series need RS\/TS-G offset adapter(PN 1700001.1700001J is adjustable offset (5mm\/10mm\/15mm).RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE \u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Outlander - CW5W (2010-2012) 4B12\u003cbr\u003eMitsubishi - Outlander - CW5W (2008-2009) 4B12\u003cbr\u003eMitsubishi - Outlander - CW5W (2009-2009) 4B12\u003cbr\u003eMitsubishi - Outlander - CW5W (2005-2007) 4B12\u003cbr\u003eMitsubishi - Outlander - CW5W (2007-2008) 4B12\u003c!--split--\u003e"}
Recaro Japan - Base Frame Seat Rail Standard Right - Mitsubishi Outlander CW5W (2005-2012) - 2083.272.2 - Rzcrewgarage

Recaro Japan - Base Frame Seat Rail Standard Right - Mitsubishi Outlander CW5W (2005-2012)

$216.00

SPECIFICATIONSManufacturer: Recaro JapanPosition: RightType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).PRODUCT NOTES:- Seat position:10mm lower than OEM seat.(Middle position of 3 position baseframe with ST-JJ)15mm to door from OEM ...


More Info
{"id":6252860637366,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Mitsubishi Pajero Mini H53A\/H58A (1998-2018)","handle":"recaro-japan-base-frame-seat-rail-standard-right-mitsubishi-pajero-mini-h53a-h58a-1998-2018-2083-105-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE \u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Pajero Mini - H53A (2002-2003) 4A30\u003cbr\u003eMitsubishi - Pajero Mini - H53A (2003-2009) 4A30\u003cbr\u003eMitsubishi - Pajero Mini - H53A (1998-2002) 4A30\u003cbr\u003eMitsubishi - Pajero Mini - H53A (2009-2018) 4A30\u003cbr\u003eMitsubishi - Pajero Mini - H58A (2002-2003) 4A30\u003cbr\u003eMitsubishi - Pajero Mini - H58A (2003-2009) 4A30\u003cbr\u003eMitsubishi - Pajero Mini - H58A (1998-2002) 4A30\u003cbr\u003eMitsubishi - Pajero Mini - H58A (2009-2018) 4A30\u003c!--split--\u003e","published_at":"2021-02-08T18:11:28+08:00","created_at":"2021-02-08T18:11:29+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","mitsubishi","pajero-mini-h53a-1998-2018-tc-4a30-i4","pajero-mini-h58a-1998-2002-tc-4a30-i4","pajero-mini-h58a-2002-2003-tc-4a30-i4","pajero-mini-h58a-2003-2009-tc-4a30-i4","pajero-mini-h58a-2009-2018-tc-4a30-i4","recaro-japan","right","seat-rails","ws10"],"price":21600,"price_min":21600,"price_max":21600,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38014276567222,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2083.105.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Mitsubishi Pajero Mini H53A\/H58A (1998-2018)","public_title":null,"options":["Default Title"],"price":21600,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-mitsubishi-pajero-mini-h53ah58a-1998-2018-rzcrew.jpg?v=1710330996"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-mitsubishi-pajero-mini-h53ah58a-1998-2018-rzcrew.jpg?v=1710330996","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Mitsubishi Pajero Mini H53A\/H58A (1998-2018) - 2083.105.2 - Rzcrewgarage","id":25433079447734,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-mitsubishi-pajero-mini-h53ah58a-1998-2018-rzcrew.jpg?v=1710330996"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-mitsubishi-pajero-mini-h53ah58a-1998-2018-rzcrew.jpg?v=1710330996","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE \u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Pajero Mini - H53A (2002-2003) 4A30\u003cbr\u003eMitsubishi - Pajero Mini - H53A (2003-2009) 4A30\u003cbr\u003eMitsubishi - Pajero Mini - H53A (1998-2002) 4A30\u003cbr\u003eMitsubishi - Pajero Mini - H53A (2009-2018) 4A30\u003cbr\u003eMitsubishi - Pajero Mini - H58A (2002-2003) 4A30\u003cbr\u003eMitsubishi - Pajero Mini - H58A (2003-2009) 4A30\u003cbr\u003eMitsubishi - Pajero Mini - H58A (1998-2002) 4A30\u003cbr\u003eMitsubishi - Pajero Mini - H58A (2009-2018) 4A30\u003c!--split--\u003e"}
Recaro Japan - Base Frame Seat Rail Standard Right - Mitsubishi Pajero Mini H53A/H58A (1998-2018) - 2083.105.2 - Rzcrewgarage

Recaro Japan - Base Frame Seat Rail Standard Right - Mitsubishi Pajero Mini H53A/H58A (1998-2018)

$216.00

SPECIFICATIONSManufacturer: Recaro JapanPosition: RightType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).COMPATIBILITY NOTES:Fits the following seats:- LX / LX-# / LX-VS / LX-VF / ERGOMED / ERGOMED C/ ERGOMED D/ ERGOMED E / ERGOMED LD...


More Info
{"id":6252860866742,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Mitsubishi Pajero V63W\/V65W\/V68W\/V73W\/V75W\/V77W\/V78W\/V83W\/V87W\/V88W\/V93W\/V97W\/V98W (1999-2018)","handle":"recaro-japan-base-frame-seat-rail-standard-right-mitsubishi-pajero-v63w-v65w-v68w-v73w-v75w-v77w-v78w-v83w-v87w-v88w-v93w-v97w-v98w-1999-2018-2083-106-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- 5mm to door from OEM seat.Seat position: height is same as OEM seat.(A case of Style-JJ)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.For non-side airbag car only.\u003cbr\u003e- D,DS,DSE=To be hard to use side brake. SR-1,2,SP-#,Racer=there is 10-15mm interference between seat shoulder and B-pillar.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE \u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- D \/ DH \/ DV\u003cbr\u003e- DS \/ DSH \/ DSV \/ ES-V \/ DSE\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Pajero - V63W (2000-2002) 6G72\u003cbr\u003eMitsubishi - Pajero - V63W (2002-2005) 6G72\u003cbr\u003eMitsubishi - Pajero - V63W (2005-2006) 6G72\u003cbr\u003eMitsubishi - Pajero - V65W (2002-2005) 6G74\u003cbr\u003eMitsubishi - Pajero - V65W (1999-2002) 6G74\u003cbr\u003eMitsubishi - Pajero - V68W (1999-2002) 4M41\u003cbr\u003eMitsubishi - Pajero - V68W (2002-2005) 4M41\u003cbr\u003eMitsubishi - Pajero - V73W (2000-2002) 6G72\u003cbr\u003eMitsubishi - Pajero - V73W (2002-2005) 6G72\u003cbr\u003eMitsubishi - Pajero - V73W (2005-2006) 6G72\u003cbr\u003eMitsubishi - Pajero - V75W (2002-2005) 6G74\u003cbr\u003eMitsubishi - Pajero - V75W (1999-2002) 6G74\u003cbr\u003eMitsubishi - Pajero - V77W (2005-2006) 6G75\u003cbr\u003eMitsubishi - Pajero - V78W (1999-2002) 4M41\u003cbr\u003eMitsubishi - Pajero - V78W (2002-2005) 4M41\u003cbr\u003eMitsubishi - Pajero - V83W (2006-2007) 6G72\u003cbr\u003eMitsubishi - Pajero - V83W (2007-2008) 6G72\u003cbr\u003eMitsubishi - Pajero - V83W (2008-2009) 6G72\u003cbr\u003eMitsubishi - Pajero - V83W (2009-2018) 6G72\u003cbr\u003eMitsubishi - Pajero - V87W (2006-2007) 6G75\u003cbr\u003eMitsubishi - Pajero - V87W (2007-2008) 6G75\u003cbr\u003eMitsubishi - Pajero - V87W (2008-2009) 6G75\u003cbr\u003eMitsubishi - Pajero - V87W (2009-2018) 6G75\u003cbr\u003eMitsubishi - Pajero - V88W (2009-2009) 4M41\u003cbr\u003eMitsubishi - Pajero - V88W (2009-2018) 4M41\u003cbr\u003eMitsubishi - Pajero - V93W (2006-2007) 6G72\u003cbr\u003eMitsubishi - Pajero - V93W (2007-2008) 6G72\u003cbr\u003eMitsubishi - Pajero - V93W (2008-2009) 6G72\u003cbr\u003eMitsubishi - Pajero - V93W (2009-2018) 6G72\u003cbr\u003eMitsubishi - Pajero - V97W (2006-2007) 6G75\u003cbr\u003eMitsubishi - Pajero - V97W (2007-2008) 6G75\u003cbr\u003eMitsubishi - Pajero - V97W (2008-2009) 6G75\u003cbr\u003eMitsubishi - Pajero - V97W (2009-2018) 6G75\u003cbr\u003eMitsubishi - Pajero - V98W (2008-2009) 4M41\u003cbr\u003eMitsubishi - Pajero - V98W (2009-2018) 4M41\u003c!--split--\u003e","published_at":"2021-02-08T18:11:34+08:00","created_at":"2021-02-08T18:11:34+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","mitsubishi","pajero-v63w-2000-2006-tt-6g72-v6","pajero-v65w-1999-2005-na-6g74-v6","pajero-v68w-1999-2005-na-4m41-i4","pajero-v73w-2000-2006-tt-6g72-v6","pajero-v75w-1999-2005-na-6g74-v6","pajero-v77w-2005-2006-na-6g75-v6","pajero-v78w-1999-2005-na-4m41-i4","pajero-v83w-2006-2018-tt-6g72-v6","pajero-v87w-2006-2018-na-6g75-v6","pajero-v88w-2009-2018-na-4m41-i4","pajero-v93w-2006-2018-tt-6g72-v6","pajero-v97w-2006-2018-na-6g75-v6","pajero-v98w-2008-2018-na-4m41-i4","recaro-japan","right","seat-rails","ws10"],"price":21600,"price_min":21600,"price_max":21600,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38014276862134,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2083.106.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Mitsubishi Pajero V63W\/V65W\/V68W\/V73W\/V75W\/V77W\/V78W\/V83W\/V87W\/V88W\/V93W\/V97W\/V98W (1999-2018)","public_title":null,"options":["Default Title"],"price":21600,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-mitsubishi-pajero-v63wv65wv68wv73wv75wv77wv78wv83wv87wv88wv93wv97wv98w-1999-2018-rzcrew.jpg?v=1710330995"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-mitsubishi-pajero-v63wv65wv68wv73wv75wv77wv78wv83wv87wv88wv93wv97wv98w-1999-2018-rzcrew.jpg?v=1710330995","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Mitsubishi Pajero V63W\/V65W\/V68W\/V73W\/V75W\/V77W\/V78W\/V83W\/V87W\/V88W\/V93W\/V97W\/V98W (1999-2018) - 2083.106.2 - Rzcrewgarage","id":25433080266934,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-mitsubishi-pajero-v63wv65wv68wv73wv75wv77wv78wv83wv87wv88wv93wv97wv98w-1999-2018-rzcrew.jpg?v=1710330995"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-mitsubishi-pajero-v63wv65wv68wv73wv75wv77wv78wv83wv87wv88wv93wv97wv98w-1999-2018-rzcrew.jpg?v=1710330995","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- 5mm to door from OEM seat.Seat position: height is same as OEM seat.(A case of Style-JJ)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.For non-side airbag car only.\u003cbr\u003e- D,DS,DSE=To be hard to use side brake. SR-1,2,SP-#,Racer=there is 10-15mm interference between seat shoulder and B-pillar.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE \u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- D \/ DH \/ DV\u003cbr\u003e- DS \/ DSH \/ DSV \/ ES-V \/ DSE\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Pajero - V63W (2000-2002) 6G72\u003cbr\u003eMitsubishi - Pajero - V63W (2002-2005) 6G72\u003cbr\u003eMitsubishi - Pajero - V63W (2005-2006) 6G72\u003cbr\u003eMitsubishi - Pajero - V65W (2002-2005) 6G74\u003cbr\u003eMitsubishi - Pajero - V65W (1999-2002) 6G74\u003cbr\u003eMitsubishi - Pajero - V68W (1999-2002) 4M41\u003cbr\u003eMitsubishi - Pajero - V68W (2002-2005) 4M41\u003cbr\u003eMitsubishi - Pajero - V73W (2000-2002) 6G72\u003cbr\u003eMitsubishi - Pajero - V73W (2002-2005) 6G72\u003cbr\u003eMitsubishi - Pajero - V73W (2005-2006) 6G72\u003cbr\u003eMitsubishi - Pajero - V75W (2002-2005) 6G74\u003cbr\u003eMitsubishi - Pajero - V75W (1999-2002) 6G74\u003cbr\u003eMitsubishi - Pajero - V77W (2005-2006) 6G75\u003cbr\u003eMitsubishi - Pajero - V78W (1999-2002) 4M41\u003cbr\u003eMitsubishi - Pajero - V78W (2002-2005) 4M41\u003cbr\u003eMitsubishi - Pajero - V83W (2006-2007) 6G72\u003cbr\u003eMitsubishi - Pajero - V83W (2007-2008) 6G72\u003cbr\u003eMitsubishi - Pajero - V83W (2008-2009) 6G72\u003cbr\u003eMitsubishi - Pajero - V83W (2009-2018) 6G72\u003cbr\u003eMitsubishi - Pajero - V87W (2006-2007) 6G75\u003cbr\u003eMitsubishi - Pajero - V87W (2007-2008) 6G75\u003cbr\u003eMitsubishi - Pajero - V87W (2008-2009) 6G75\u003cbr\u003eMitsubishi - Pajero - V87W (2009-2018) 6G75\u003cbr\u003eMitsubishi - Pajero - V88W (2009-2009) 4M41\u003cbr\u003eMitsubishi - Pajero - V88W (2009-2018) 4M41\u003cbr\u003eMitsubishi - Pajero - V93W (2006-2007) 6G72\u003cbr\u003eMitsubishi - Pajero - V93W (2007-2008) 6G72\u003cbr\u003eMitsubishi - Pajero - V93W (2008-2009) 6G72\u003cbr\u003eMitsubishi - Pajero - V93W (2009-2018) 6G72\u003cbr\u003eMitsubishi - Pajero - V97W (2006-2007) 6G75\u003cbr\u003eMitsubishi - Pajero - V97W (2007-2008) 6G75\u003cbr\u003eMitsubishi - Pajero - V97W (2008-2009) 6G75\u003cbr\u003eMitsubishi - Pajero - V97W (2009-2018) 6G75\u003cbr\u003eMitsubishi - Pajero - V98W (2008-2009) 4M41\u003cbr\u003eMitsubishi - Pajero - V98W (2009-2018) 4M41\u003c!--split--\u003e"}
Recaro Japan - Base Frame Seat Rail Standard Right - Mitsubishi Pajero V63W/V65W/V68W/V73W/V75W/V77W/V78W/V83W/V87W/V88W/V93W/V97W/V98W (1999-2018) - 2083.106.2 - Rzcrewgarage

Recaro Japan - Base Frame Seat Rail Standard Right - Mitsubishi Pajero V63W/V65W/V68W/V73W/V75W/V77W/V78W/V83W/V87W/V88W/V93W/V97W/V98W (1999-2018)

$216.00

SPECIFICATIONSManufacturer: Recaro JapanPosition: RightType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).PRODUCT NOTES:- 5mm to door from OEM seat.Seat position: height is same as OEM seat.(A case of Style-JJ)- Cautionary note: After ...


More Info
{"id":6267193098422,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Jimny JB23W (1998-2018)","handle":"recaro-japan-base-frame-seat-rail-standard-right-suzuki-jimny-jb23w-1998-2018-2088-015-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(Middle position of 3 position baseframe with ST-JJ)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.This baseframe is changed the form from July 13, 2011.\u003cbr\u003e- There is interference between seat backrest and door armrest. IS-84 LX(Including JP ERGOMED series),LS,LT 10mm. old Orthopad(till 2010 Oct)= 10mm. Later than 2010 Nov old Orthopad= 10mm. Style-J,JJ,JC,D,DC= 15mm.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Jimny - JB23W (1998-2018) K6A\u003c!--split--\u003e","published_at":"2021-02-16T20:52:25+08:00","created_at":"2021-02-16T20:52:26+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","jimny-jb23w-1998-2018-tc-k6a-i3","jp1","recaro-japan","right","seat-rails","suzuki","ws10"],"price":21600,"price_min":21600,"price_max":21600,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38045014851766,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2088.015.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Jimny JB23W (1998-2018)","public_title":null,"options":["Default Title"],"price":21600,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-jimny-jb23w-1998-2018-rzcrew.jpg?v=1710326896"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-jimny-jb23w-1998-2018-rzcrew.jpg?v=1710326896","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Jimny JB23W (1998-2018) - 2088.015.2 - Rzcrewgarage","id":22850257453238,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-jimny-jb23w-1998-2018-rzcrew.jpg?v=1710326896"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-jimny-jb23w-1998-2018-rzcrew.jpg?v=1710326896","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(Middle position of 3 position baseframe with ST-JJ)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.This baseframe is changed the form from July 13, 2011.\u003cbr\u003e- There is interference between seat backrest and door armrest. IS-84 LX(Including JP ERGOMED series),LS,LT 10mm. old Orthopad(till 2010 Oct)= 10mm. Later than 2010 Nov old Orthopad= 10mm. Style-J,JJ,JC,D,DC= 15mm.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Jimny - JB23W (1998-2018) K6A\u003c!--split--\u003e"}
Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Jimny JB23W (1998-2018) - 2088.015.2 - Rzcrewgarage

Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Jimny JB23W (1998-2018)

$216.00

SPECIFICATIONSManufacturer: Recaro JapanPosition: RightType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).PRODUCT NOTES:- Seat position: height is same as OEM seat.(Middle position of 3 position baseframe with ST-JJ)- Cautionary note: ...


More Info
{"id":6267193131190,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Jimny Sierra JB43W (2002-2018)","handle":"recaro-japan-base-frame-seat-rail-standard-right-suzuki-jimny-sierra-jb43w-2002-2018-2088-015-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(Middle position of 3 position baseframe with ST-JJ)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.This baseframe is changed the form from July 13, 2011.\u003cbr\u003e- There is interference between seat backrest and door armrest. IS-84 LX(Including JP ERGOMED series),LS,LT 10mm. old Orthopad(till 2010 Oct)= 10mm. Later than 2010 Nov old Orthopad= 10mm. Style-J,JJ,JC,D,DC= 15mm.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Jimny Sierra - JB43W (2002-2018) M13A\u003c!--split--\u003e","published_at":"2021-02-16T20:52:27+08:00","created_at":"2021-02-16T20:52:27+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","jimny-sierra-jb43w-2002-2018-na-m13a-i4","jp1","recaro-japan","right","seat-rails","suzuki","ws10"],"price":21600,"price_min":21600,"price_max":21600,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38045014884534,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2088.015.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Jimny Sierra JB43W (2002-2018)","public_title":null,"options":["Default Title"],"price":21600,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-jimny-sierra-jb43w-2002-2018-rzcrew.jpg?v=1710326896"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-jimny-sierra-jb43w-2002-2018-rzcrew.jpg?v=1710326896","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Jimny Sierra JB43W (2002-2018) - 2088.015.2 - Rzcrewgarage","id":22850257649846,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-jimny-sierra-jb43w-2002-2018-rzcrew.jpg?v=1710326896"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-jimny-sierra-jb43w-2002-2018-rzcrew.jpg?v=1710326896","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(Middle position of 3 position baseframe with ST-JJ)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.This baseframe is changed the form from July 13, 2011.\u003cbr\u003e- There is interference between seat backrest and door armrest. IS-84 LX(Including JP ERGOMED series),LS,LT 10mm. old Orthopad(till 2010 Oct)= 10mm. Later than 2010 Nov old Orthopad= 10mm. Style-J,JJ,JC,D,DC= 15mm.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Jimny Sierra - JB43W (2002-2018) M13A\u003c!--split--\u003e"}
Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Jimny Sierra JB43W (2002-2018) - 2088.015.2 - Rzcrewgarage

Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Jimny Sierra JB43W (2002-2018)

$216.00

SPECIFICATIONSManufacturer: Recaro JapanPosition: RightType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).PRODUCT NOTES:- Seat position: height is same as OEM seat.(Middle position of 3 position baseframe with ST-JJ)- Cautionary note: ...


More Info
{"id":6267194278070,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Swift Sport ZC31S (2005-2019)","handle":"recaro-japan-base-frame-seat-rail-standard-right-suzuki-swift-sport-zc31s-2005-2019-2088-544-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(Middle position of 3 position baseframe with ST-JJ) 4mm to door from OEM seat.The length of slider is 15mm longer than OEM seat on front side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.2WD. 4WD. Attached a side airbag canceller.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Swift Sport - ZC31S (2007-2009) M16A\u003cbr\u003eSuzuki - Swift Sport - ZC31S (2009-2019) M16A\u003cbr\u003eSuzuki - Swift Sport - ZC31S (2005-2007) M16A\u003c!--split--\u003e","published_at":"2021-02-16T20:52:57+08:00","created_at":"2021-02-16T20:52:58+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","2019","jp1","recaro-japan","right","seat-rails","suzuki","swift-sport-zc31s-2004-2010-na-m16a-i4","ws10"],"price":21600,"price_min":21600,"price_max":21600,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38045015900342,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2088.544.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Swift Sport ZC31S (2005-2019)","public_title":null,"options":["Default Title"],"price":21600,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-swift-sport-zc31s-2005-2019-rzcrew.jpg?v=1710326883"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-swift-sport-zc31s-2005-2019-rzcrew.jpg?v=1710326883","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Swift Sport ZC31S (2005-2019) - 2088.544.2 - Rzcrewgarage","id":22850260861110,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-swift-sport-zc31s-2005-2019-rzcrew.jpg?v=1710326883"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-swift-sport-zc31s-2005-2019-rzcrew.jpg?v=1710326883","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(Middle position of 3 position baseframe with ST-JJ) 4mm to door from OEM seat.The length of slider is 15mm longer than OEM seat on front side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.2WD. 4WD. Attached a side airbag canceller.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Swift Sport - ZC31S (2007-2009) M16A\u003cbr\u003eSuzuki - Swift Sport - ZC31S (2009-2019) M16A\u003cbr\u003eSuzuki - Swift Sport - ZC31S (2005-2007) M16A\u003c!--split--\u003e"}
Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Swift Sport ZC31S (2005-2019) - 2088.544.2 - Rzcrewgarage

Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Swift Sport ZC31S (2005-2019)

$216.00

SPECIFICATIONSManufacturer: Recaro JapanPosition: RightType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).PRODUCT NOTES:- Seat position: height is same as OEM seat.(Middle position of 3 position baseframe with ST-JJ) 4mm to door from O...


More Info
{"id":6267194310838,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Swift ZD11S\/ZD21S (2004-2010)","handle":"recaro-japan-base-frame-seat-rail-standard-right-suzuki-swift-zd11s-zd21s-2004-2010-2088-544-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(Middle position of 3 position baseframe with ST-JJ) 4mm to door from OEM seat.The length of slider is 15mm longer than OEM seat on front side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.2WD. 4WD. Attached a side airbag canceller.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Swift - ZD11S (2007-2010) M13A\u003cbr\u003eSuzuki - Swift - ZD11S (2004-2007) M13A\u003cbr\u003eSuzuki - Swift - ZD21S (2007-2010) M15A\u003cbr\u003eSuzuki - Swift - ZD21S (2004-2007) M15A\u003c!--split--\u003e","published_at":"2021-02-16T20:52:59+08:00","created_at":"2021-02-16T20:53:00+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2004","2005","2006","2007","2008","2009","2010","jp1","recaro-japan","right","seat-rails","suzuki","swift-zd11s-2004-2010-na-m13a-i4","swift-zd21s-2004-2010-na-m15a-i4","ws10"],"price":21600,"price_min":21600,"price_max":21600,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38045015933110,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2088.544.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Swift ZD11S\/ZD21S (2004-2010)","public_title":null,"options":["Default Title"],"price":21600,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-swift-zd11szd21s-2004-2010-rzcrew.jpg?v=1710326883"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-swift-zd11szd21s-2004-2010-rzcrew.jpg?v=1710326883","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Swift ZD11S\/ZD21S (2004-2010) - 2088.544.2 - Rzcrewgarage","id":22850260893878,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-swift-zd11szd21s-2004-2010-rzcrew.jpg?v=1710326883"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-swift-zd11szd21s-2004-2010-rzcrew.jpg?v=1710326883","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(Middle position of 3 position baseframe with ST-JJ) 4mm to door from OEM seat.The length of slider is 15mm longer than OEM seat on front side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.2WD. 4WD. Attached a side airbag canceller.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Swift - ZD11S (2007-2010) M13A\u003cbr\u003eSuzuki - Swift - ZD11S (2004-2007) M13A\u003cbr\u003eSuzuki - Swift - ZD21S (2007-2010) M15A\u003cbr\u003eSuzuki - Swift - ZD21S (2004-2007) M15A\u003c!--split--\u003e"}
Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Swift ZD11S/ZD21S (2004-2010) - 2088.544.2 - Rzcrewgarage

Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Swift ZD11S/ZD21S (2004-2010)

$216.00

SPECIFICATIONSManufacturer: Recaro JapanPosition: RightType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).PRODUCT NOTES:- Seat position: height is same as OEM seat.(Middle position of 3 position baseframe with ST-JJ) 4mm to door from O...


More Info
{"id":7442478268598,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Crown GRS180\/GRS184\/GRS200\/GRS202\/GRS204 (2003-2019)","handle":"recaro-japan-base-frame-seat-rail-standard-right-toyota-crown-grs180-grs184-grs200-grs202-grs204-2003-2019-2080-415-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator. Please use airbag canceller.Seat position:10mm lower than lowest position of OEM seat.(Middle position of 3 position baseframe with ST-JJ)5mm to door from OEM seat. There is a bit interference between slide lever and floor console on the front position.Function of seat position sensor loses.Function of seat belt reminder loses on passenger seat. (Warning lights of the seat belt will not light.)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.Attached a side airbag canceller. 2WD.\u003cbr\u003e- D,DS,DSE,CSEwill experierence some interference with seat cushion side and center console. RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- D \/ DH \/ DV\u003cbr\u003e- DS \/ DSH \/ DSV \/ ES-V \/ DSE\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Crown - GRS180 (2005-2008) 4GR-FSE\u003cbr\u003eToyota - Crown - GRS180 (2003-2005) 4GR-FSE\u003cbr\u003eToyota - Crown - GRS184 (2005-2008) 2GR-FSE\u003cbr\u003eToyota - Crown - GRS184 (2003-2005) 2GR-FSE\u003cbr\u003eToyota - Crown - GRS200 (2008-2019) 4GR-FSE\u003cbr\u003eToyota - Crown - GRS202 (2008-2019) 3GR-FSE\u003cbr\u003eToyota - Crown - GRS204 (2008-2019) 2GR-FSE\u003c!--split--\u003e","published_at":"2022-08-23T18:21:48+08:00","created_at":"2022-08-23T18:10:21+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","2019","crown-grs180-2003-2008-na-4gr-fse-v6","crown-grs184-2005-2008-na-2gr-fse-v6","crown-grs200-2008-2019-na-4gr-fse-v6","crown-grs202-2008-2019-na-3gr-fse-v6","crown-grs204-2008-2019-na-2gr-fse-v6","jp1","recaro-japan","right","seat-rails","toyota","ws10"],"price":21600,"price_min":21600,"price_max":21600,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":41726136582326,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2080.415.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Crown GRS180\/GRS184\/GRS200\/GRS202\/GRS204 (2003-2019)","public_title":null,"options":["Default Title"],"price":21600,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-crown-grs180grs184grs200grs202grs204-2003-2019-rzcrew.jpg?v=1710320108"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-crown-grs180grs184grs200grs202grs204-2003-2019-rzcrew.jpg?v=1710320108","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Crown GRS180\/GRS184\/GRS200\/GRS202\/GRS204 (2003-2019) - 2080.415.2 - Rzcrewgarage","id":24895577620662,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-crown-grs180grs184grs200grs202grs204-2003-2019-rzcrew.jpg?v=1710320108"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-crown-grs180grs184grs200grs202grs204-2003-2019-rzcrew.jpg?v=1710320108","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator. Please use airbag canceller.Seat position:10mm lower than lowest position of OEM seat.(Middle position of 3 position baseframe with ST-JJ)5mm to door from OEM seat. There is a bit interference between slide lever and floor console on the front position.Function of seat position sensor loses.Function of seat belt reminder loses on passenger seat. (Warning lights of the seat belt will not light.)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.Attached a side airbag canceller. 2WD.\u003cbr\u003e- D,DS,DSE,CSEwill experierence some interference with seat cushion side and center console. RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- D \/ DH \/ DV\u003cbr\u003e- DS \/ DSH \/ DSV \/ ES-V \/ DSE\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Crown - GRS180 (2005-2008) 4GR-FSE\u003cbr\u003eToyota - Crown - GRS180 (2003-2005) 4GR-FSE\u003cbr\u003eToyota - Crown - GRS184 (2005-2008) 2GR-FSE\u003cbr\u003eToyota - Crown - GRS184 (2003-2005) 2GR-FSE\u003cbr\u003eToyota - Crown - GRS200 (2008-2019) 4GR-FSE\u003cbr\u003eToyota - Crown - GRS202 (2008-2019) 3GR-FSE\u003cbr\u003eToyota - Crown - GRS204 (2008-2019) 2GR-FSE\u003c!--split--\u003e"}
Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Crown GRS180/GRS184/GRS200/GRS202/GRS204 (2003-2019) - 2080.415.2 - Rzcrewgarage

Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Crown GRS180/GRS184/GRS200/GRS202/GRS204 (2003-2019)

$216.00

SPECIFICATIONSManufacturer: Recaro JapanPosition: RightType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).PRODUCT NOTES:- Function of side airbag loses. Need to cancel airbag warning indicator. Please use airbag canceller.Seat position...


More Info
{"id":7442476826806,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Land Cruiser Prado HZJ76V\/KZJ71G\/KZJ71W\/KZJ78G\/KZJ78W\/LJ71G (1987-2015)","handle":"recaro-japan-base-frame-seat-rail-standard-right-toyota-land-cruiser-prado-hzj76v-kzj71g-kzj71w-kzj78g-kzj78w-lj71g-1987-2015-2080-123-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(Middle position of 3 position baseframe with ST-JJ) Sometimes other holes which are not for OEM seat may be used to install. The holes are behind of carpet.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. It's for the car without seat suspensions.\u003cbr\u003e- Trend-J,JJ,JC,D,DCfor back rest side and DoorArm Rest approximately10〜15mm interfere.SR-1,2,3,4,5,Sport-J,JJ,JC,D,DCfor back rest side and DoorArm Rest approximately5〜10mm interfere.CS,CSEfor back rest side and DoorArm Rest approximately5〜10mm interfere.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 \u0026amp; 3\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Land Cruiser Prado - HZJ76V (1999-2004) 1HZ\u003cbr\u003eToyota - Land Cruiser Prado - KZJ71G (1993-1996) 1KZ-TE\u003cbr\u003eToyota - Land Cruiser Prado - KZJ71W (1993-1996) 1KZ-TE\u003cbr\u003eToyota - Land Cruiser Prado - KZJ78G (1993-1996) 1KZ-TE\u003cbr\u003eToyota - Land Cruiser Prado - KZJ78W (1993-1995) 1KZ-TE\u003cbr\u003eToyota - Land Cruiser Prado - LJ71G (1987-2015) 2L-T\u003c!--split--\u003e","published_at":"2022-08-23T18:22:08+08:00","created_at":"2022-08-23T18:08:49+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","jp1","land-cruiser-prado-hzj76v-1999-2004-na-1hz-i6","land-cruiser-prado-kzj71g-1993-1996-tc-1kz-te-i4","land-cruiser-prado-kzj71w-1993-1996-tc-1kz-te-i4","land-cruiser-prado-kzj78g-1993-1996-tc-1kz-te-i4","land-cruiser-prado-kzj78w-1993-1995-tc-1kz-te-i4","land-cruiser-prado-lj71g-1987-2015-tc-2l-t-i4","recaro-japan","right","seat-rails","toyota","ws10"],"price":21600,"price_min":21600,"price_max":21600,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":41726133174454,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2080.123.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Land Cruiser Prado HZJ76V\/KZJ71G\/KZJ71W\/KZJ78G\/KZJ78W\/LJ71G (1987-2015)","public_title":null,"options":["Default Title"],"price":21600,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-land-cruiser-prado-hzj76vkzj71gkzj71wkzj78gkzj78wlj71g-1987-2015-rzcrew.jpg?v=1710320123"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-land-cruiser-prado-hzj76vkzj71gkzj71wkzj78gkzj78wlj71g-1987-2015-rzcrew.jpg?v=1710320123","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Land Cruiser Prado HZJ76V\/KZJ71G\/KZJ71W\/KZJ78G\/KZJ78W\/LJ71G (1987-2015) - 2080.123.2 - Rzcrewgarage","id":24895569002678,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-land-cruiser-prado-hzj76vkzj71gkzj71wkzj78gkzj78wlj71g-1987-2015-rzcrew.jpg?v=1710320123"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-land-cruiser-prado-hzj76vkzj71gkzj71wkzj78gkzj78wlj71g-1987-2015-rzcrew.jpg?v=1710320123","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(Middle position of 3 position baseframe with ST-JJ) Sometimes other holes which are not for OEM seat may be used to install. The holes are behind of carpet.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. It's for the car without seat suspensions.\u003cbr\u003e- Trend-J,JJ,JC,D,DCfor back rest side and DoorArm Rest approximately10〜15mm interfere.SR-1,2,3,4,5,Sport-J,JJ,JC,D,DCfor back rest side and DoorArm Rest approximately5〜10mm interfere.CS,CSEfor back rest side and DoorArm Rest approximately5〜10mm interfere.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 \u0026amp; 3\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Land Cruiser Prado - HZJ76V (1999-2004) 1HZ\u003cbr\u003eToyota - Land Cruiser Prado - KZJ71G (1993-1996) 1KZ-TE\u003cbr\u003eToyota - Land Cruiser Prado - KZJ71W (1993-1996) 1KZ-TE\u003cbr\u003eToyota - Land Cruiser Prado - KZJ78G (1993-1996) 1KZ-TE\u003cbr\u003eToyota - Land Cruiser Prado - KZJ78W (1993-1995) 1KZ-TE\u003cbr\u003eToyota - Land Cruiser Prado - LJ71G (1987-2015) 2L-T\u003c!--split--\u003e"}
Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Land Cruiser Prado HZJ76V/KZJ71G/KZJ71W/KZJ78G/KZJ78W/LJ71G (1987-2015) - 2080.123.2 - Rzcrewgarage

Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Land Cruiser Prado HZJ76V/KZJ71G/KZJ71W/KZJ78G/KZJ78W/LJ71G (1987-2015)

$216.00

SPECIFICATIONSManufacturer: Recaro JapanPosition: RightType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).PRODUCT NOTES:- Seat position: height is same as OEM seat.(Middle position of 3 position baseframe with ST-JJ) Sometimes other ho...


More Info
{"id":7442480758966,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Passo KGC10\/KGC15\/QNC10 (2004-2016)","handle":"recaro-japan-base-frame-seat-rail-standard-right-toyota-passo-kgc10-kgc15-qnc10-2004-2016-2080-832-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position:20mm lower than OEM seat.(Middle position of 3 position baseframe with ST-JJ)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.For non-side airbag car only. The car type which has key free function is not checked whether can be installed.\u003cbr\u003e- CS,CT,C-classic CSE= the sitting position will be higher because of spacers usage. RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Passo - KGC10 (2004-2007) 1KR-FE\u003cbr\u003eToyota - Passo - KGC15 (2004-2007) 1KR-FE\u003cbr\u003eToyota - Passo - QNC10 (2004-2016) K3-VE\u003c!--split--\u003e","published_at":"2022-08-23T18:22:11+08:00","created_at":"2022-08-23T18:13:13+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","jp1","passo-kgc10-2004-2007-na-1kr-fe-i3","passo-kgc15-2004-2007-na-1kr-fe-i3","passo-qnc10-2004-2016-na-k3-ve-i4","recaro-japan","right","seat-rails","toyota","ws10"],"price":21600,"price_min":21600,"price_max":21600,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":41726142152886,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2080.832.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Passo KGC10\/KGC15\/QNC10 (2004-2016)","public_title":null,"options":["Default Title"],"price":21600,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-passo-kgc10kgc15qnc10-2004-2016-rzcrew.jpg?v=1710320073"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-passo-kgc10kgc15qnc10-2004-2016-rzcrew.jpg?v=1710320073","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Passo KGC10\/KGC15\/QNC10 (2004-2016) - 2080.832.2 - Rzcrewgarage","id":24895591284918,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-passo-kgc10kgc15qnc10-2004-2016-rzcrew.jpg?v=1710320073"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-passo-kgc10kgc15qnc10-2004-2016-rzcrew.jpg?v=1710320073","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position:20mm lower than OEM seat.(Middle position of 3 position baseframe with ST-JJ)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.For non-side airbag car only. The car type which has key free function is not checked whether can be installed.\u003cbr\u003e- CS,CT,C-classic CSE= the sitting position will be higher because of spacers usage. RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Passo - KGC10 (2004-2007) 1KR-FE\u003cbr\u003eToyota - Passo - KGC15 (2004-2007) 1KR-FE\u003cbr\u003eToyota - Passo - QNC10 (2004-2016) K3-VE\u003c!--split--\u003e"}
Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Passo KGC10/KGC15/QNC10 (2004-2016) - 2080.832.2 - Rzcrewgarage

Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Passo KGC10/KGC15/QNC10 (2004-2016)

$216.00

SPECIFICATIONSManufacturer: Recaro JapanPosition: RightType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).PRODUCT NOTES:- Seat position:20mm lower than OEM seat.(Middle position of 3 position baseframe with ST-JJ)- Cautionary note: Aft...


More Info
{"id":7442480693430,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Ractis NCP100\/NCP105\/SCP100 (2005-2018)","handle":"recaro-japan-base-frame-seat-rail-standard-right-toyota-ractis-ncp100-ncp105-scp100-2005-2018-2080-743-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(Middle position of 3 position baseframe with ST-JJ) The length of slider is 20mm shorter than OEM seat on rear side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. For right side seat only..(driver side) For non-side airbag car only. 4WD(Left sade seat is unconfirmed.)Cold climate area specificationand Optional equipment car is unconfirmed\u003cbr\u003e- Trend-J,JJ,JC,D,DCfor back rest side and Doorarm resta couple mm. interfere.CS,CSEuses spacer therefore seat position will be higher.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Ractis - NCP100 (2005-2018) 1NZ-FE\u003cbr\u003eToyota - Ractis - NCP105 (2005-2018) 1NZ-FE\u003cbr\u003eToyota - Ractis - SCP100 (2005-2018) 2SZ-FE\u003c!--split--\u003e","published_at":"2022-08-23T18:22:15+08:00","created_at":"2022-08-23T18:13:09+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","jp1","ractis-ncp100-2005-2018-na-1nz-fe-i4","ractis-ncp105-2005-2018-na-1nz-fe-i4","ractis-scp100-2005-2018-na-2sz-fe-i4","recaro-japan","right","seat-rails","toyota","ws10"],"price":21600,"price_min":21600,"price_max":21600,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":41726142087350,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2080.743.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Ractis NCP100\/NCP105\/SCP100 (2005-2018)","public_title":null,"options":["Default Title"],"price":21600,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-ractis-ncp100ncp105scp100-2005-2018-rzcrew.jpg?v=1710320073"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-ractis-ncp100ncp105scp100-2005-2018-rzcrew.jpg?v=1710320073","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Ractis NCP100\/NCP105\/SCP100 (2005-2018) - 2080.743.2 - Rzcrewgarage","id":24895591186614,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-ractis-ncp100ncp105scp100-2005-2018-rzcrew.jpg?v=1710320073"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-ractis-ncp100ncp105scp100-2005-2018-rzcrew.jpg?v=1710320073","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(Middle position of 3 position baseframe with ST-JJ) The length of slider is 20mm shorter than OEM seat on rear side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. For right side seat only..(driver side) For non-side airbag car only. 4WD(Left sade seat is unconfirmed.)Cold climate area specificationand Optional equipment car is unconfirmed\u003cbr\u003e- Trend-J,JJ,JC,D,DCfor back rest side and Doorarm resta couple mm. interfere.CS,CSEuses spacer therefore seat position will be higher.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Ractis - NCP100 (2005-2018) 1NZ-FE\u003cbr\u003eToyota - Ractis - NCP105 (2005-2018) 1NZ-FE\u003cbr\u003eToyota - Ractis - SCP100 (2005-2018) 2SZ-FE\u003c!--split--\u003e"}
Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Ractis NCP100/NCP105/SCP100 (2005-2018) - 2080.743.2 - Rzcrewgarage

Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Ractis NCP100/NCP105/SCP100 (2005-2018)

$216.00

SPECIFICATIONSManufacturer: Recaro JapanPosition: RightType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).PRODUCT NOTES:- Seat position: height is same as OEM seat.(Middle position of 3 position baseframe with ST-JJ) The length of slid...


More Info
{"id":7442477187254,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota RAV4 ACA31W\/ACA36W (2005-2018)","handle":"recaro-japan-base-frame-seat-rail-standard-right-toyota-rav4-aca31w-aca36w-2005-2018-2080-253-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(Middle position of 3 position baseframe with ST-JJ) The length of slider is 20mm shorter than OEM seat on front side. drivers side seat position sensor requires relocation. .\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.For non-side airbag car only.Cold climate area specificationand Optional equipment car is unconfirmed\u003cbr\u003e- CS,CT,C-classic CSE= the sitting position will be higher because of spacers usage.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - RAV4 - ACA31W (2006-2018) 2AZ-FE\u003cbr\u003eToyota - RAV4 - ACA36W (2005-2018) 2AZ-FE\u003c!--split--\u003e","published_at":"2022-08-23T18:22:16+08:00","created_at":"2022-08-23T18:09:15+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","jp1","rav4-aca31w-2006-2018-na-2az-fe-i4","rav4-aca36w-2005-2018-na-2az-fe-i4","recaro-japan","right","seat-rails","toyota","ws10"],"price":21600,"price_min":21600,"price_max":21600,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":41726133928118,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2080.253.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota RAV4 ACA31W\/ACA36W (2005-2018)","public_title":null,"options":["Default Title"],"price":21600,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-rav4-aca31waca36w-2005-2018-rzcrew.jpg?v=1710320120"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-rav4-aca31waca36w-2005-2018-rzcrew.jpg?v=1710320120","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota RAV4 ACA31W\/ACA36W (2005-2018) - 2080.253.2 - Rzcrewgarage","id":24895572017334,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-rav4-aca31waca36w-2005-2018-rzcrew.jpg?v=1710320120"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-rav4-aca31waca36w-2005-2018-rzcrew.jpg?v=1710320120","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(Middle position of 3 position baseframe with ST-JJ) The length of slider is 20mm shorter than OEM seat on front side. drivers side seat position sensor requires relocation. .\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.For non-side airbag car only.Cold climate area specificationand Optional equipment car is unconfirmed\u003cbr\u003e- CS,CT,C-classic CSE= the sitting position will be higher because of spacers usage.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - RAV4 - ACA31W (2006-2018) 2AZ-FE\u003cbr\u003eToyota - RAV4 - ACA36W (2005-2018) 2AZ-FE\u003c!--split--\u003e"}
Recaro Japan - Base Frame Seat Rail Standard Right - Toyota RAV4 ACA31W/ACA36W (2005-2018) - 2080.253.2 - Rzcrewgarage

Recaro Japan - Base Frame Seat Rail Standard Right - Toyota RAV4 ACA31W/ACA36W (2005-2018)

$216.00

SPECIFICATIONSManufacturer: Recaro JapanPosition: RightType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).PRODUCT NOTES:- Seat position: height is same as OEM seat.(Middle position of 3 position baseframe with ST-JJ) The length of slid...


More Info
{"id":7442478137526,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Vitz KSP90\/NCP91\/SCP90 (2005-2010)","handle":"recaro-japan-base-frame-seat-rail-standard-right-toyota-vitz-ksp90-ncp91-scp90-2005-2010-2080-394-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure): Replace with a thin recliner dial (sold separately; 2200Yen) to avoid (alleviate) interference with the car.\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#: Replace with a thin recliner dial (sold separately; 2200Yen) to avoid (alleviate) interference with the car.\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5: Replace with a thin recliner dial (sold separately; 2200Yen) to avoid (alleviate) interference with the car.\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model: Replace with a thin recliner dial (sold separately; 2200Yen) to avoid (alleviate) interference with the car.\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Vitz - KSP90 (2005-2007) 1KR-FE\u003cbr\u003eToyota - Vitz - KSP90 (2007-2009) 1KR-FE\u003cbr\u003eToyota - Vitz - KSP90 (2009-2010) 1KR-FE\u003cbr\u003eToyota - Vitz - NCP91 (2005-2007) 1NZ-FE\u003cbr\u003eToyota - Vitz - NCP91 (2007-2009) 1NZ-FE\u003cbr\u003eToyota - Vitz - NCP91 (2009-2010) 1NZ-FE\u003cbr\u003eToyota - Vitz - SCP90 (2005-2007) 2SZ-FE\u003cbr\u003eToyota - Vitz - SCP90 (2007-2009) 2SZ-FE\u003cbr\u003eToyota - Vitz - SCP90 (2009-2010) 2SZ-FE\u003c!--split--\u003e","published_at":"2022-08-23T18:22:28+08:00","created_at":"2022-08-23T18:10:13+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2005","2006","2007","2008","2009","2010","jp1","recaro-japan","right","seat-rails","toyota","vitz-ksp90-2005-2010-na-1kr-fe-i3","vitz-ncp91-2005-2010-na-1nz-fe-i4","vitz-scp90-2005-2010-na-2sz-fe-i4","ws10"],"price":21600,"price_min":21600,"price_max":21600,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":41726136058038,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2080.394.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Vitz KSP90\/NCP91\/SCP90 (2005-2010)","public_title":null,"options":["Default Title"],"price":21600,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-vitz-ksp90ncp91scp90-2005-2010-rzcrew.jpg?v=1710320110"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-vitz-ksp90ncp91scp90-2005-2010-rzcrew.jpg?v=1710320110","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Vitz KSP90\/NCP91\/SCP90 (2005-2010) - 2080.394.2 - Rzcrewgarage","id":24895576539318,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-vitz-ksp90ncp91scp90-2005-2010-rzcrew.jpg?v=1710320110"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-vitz-ksp90ncp91scp90-2005-2010-rzcrew.jpg?v=1710320110","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure): Replace with a thin recliner dial (sold separately; 2200Yen) to avoid (alleviate) interference with the car.\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#: Replace with a thin recliner dial (sold separately; 2200Yen) to avoid (alleviate) interference with the car.\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5: Replace with a thin recliner dial (sold separately; 2200Yen) to avoid (alleviate) interference with the car.\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model: Replace with a thin recliner dial (sold separately; 2200Yen) to avoid (alleviate) interference with the car.\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Vitz - KSP90 (2005-2007) 1KR-FE\u003cbr\u003eToyota - Vitz - KSP90 (2007-2009) 1KR-FE\u003cbr\u003eToyota - Vitz - KSP90 (2009-2010) 1KR-FE\u003cbr\u003eToyota - Vitz - NCP91 (2005-2007) 1NZ-FE\u003cbr\u003eToyota - Vitz - NCP91 (2007-2009) 1NZ-FE\u003cbr\u003eToyota - Vitz - NCP91 (2009-2010) 1NZ-FE\u003cbr\u003eToyota - Vitz - SCP90 (2005-2007) 2SZ-FE\u003cbr\u003eToyota - Vitz - SCP90 (2007-2009) 2SZ-FE\u003cbr\u003eToyota - Vitz - SCP90 (2009-2010) 2SZ-FE\u003c!--split--\u003e"}
Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Vitz KSP90/NCP91/SCP90 (2005-2010) - 2080.394.2 - Rzcrewgarage

Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Vitz KSP90/NCP91/SCP90 (2005-2010)

$216.00

SPECIFICATIONSManufacturer: Recaro JapanPosition: RightType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).COMPATIBILITY NOTES:Fits the following seats:- LX / LX-# / LX-VS / LX-VF / ERGOMED / ERGOMED C/ ERGOMED D/ ERGOMED E / ERGOMED LD...


More Info
11% OFF
Revolution - Polycarbonate Front window glasses set - Mazda - RX-8 SE3P - RSE3-PG - Rzcrew Garage
{"id":7673276039350,"title":"Revolution - Polycarbonate Front window glasses set - Mazda - RX-8 SE3P","handle":"revolution-polycarbonate-front-window-glasses-set-mazda-rx-8-se3p","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Revolution\u003cbr\u003eReference Number: RSE3-PG\u003cbr\u003eType: Window Visor\u003cbr\u003eMaterial: Polycarbonate\u003cbr\u003e\u003cbr\u003eGenuine replacement type front door glass made of thermoformed polycarbonate. It is stronger than acrylic. The weight of genuine door glass is approximately 4 kg, whereas this product weighs approximately 2 kg, which is approximately 50% lighter.\u003cbr\u003e\u003cbr\u003e\n\nPrice is for left and right set (1 car).\u003cbr\u003e\nThis product is a competition part.\u003cbr\u003e\u003cbr\u003e2 pieces included!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eRX-8 | SE3P Zenki | 2003-2008 | NA | 13B-MSP | R\u003cbr\u003eRX-8 | SE3P Kouki | 2008-2013 | NA | 13B-MSP | R\u003c!--split--\u003e","published_at":"2023-09-26T14:31:41+08:00","created_at":"2023-09-26T14:30:12+08:00","vendor":"Revolution","type":"Aero","tags":["2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","aero","jp1","mazda","revolution","rx-8-se3p-kouki-2008-2013-na-13b-msp-r","rx-8-se3p-zenki-2003-2008-na-13b-msp-r","window-visor","ws111"],"price":135992,"price_min":135992,"price_max":135992,"available":true,"price_varies":false,"compare_at_price":152800,"compare_at_price_min":152800,"compare_at_price_max":152800,"compare_at_price_varies":false,"variants":[{"id":42386544099510,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RSE3-PG","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Revolution - Polycarbonate Front window glasses set - Mazda - RX-8 SE3P","public_title":null,"options":["Default Title"],"price":135992,"weight":14400,"compare_at_price":152800,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/revolution-polycarbonate-front-window-glasses-set-mazda-rx-8-se3p-rzcrew.jpg?v=1710314717"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/revolution-polycarbonate-front-window-glasses-set-mazda-rx-8-se3p-rzcrew.jpg?v=1710314717","options":["Title"],"media":[{"alt":"Revolution - Polycarbonate Front window glasses set - Mazda - RX-8 SE3P - RSE3-PG - Rzcrew Garage","id":26638850228406,"position":1,"preview_image":{"aspect_ratio":1.333,"height":240,"width":320,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/revolution-polycarbonate-front-window-glasses-set-mazda-rx-8-se3p-rzcrew.jpg?v=1710314717"},"aspect_ratio":1.333,"height":240,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/revolution-polycarbonate-front-window-glasses-set-mazda-rx-8-se3p-rzcrew.jpg?v=1710314717","width":320}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Revolution\u003cbr\u003eReference Number: RSE3-PG\u003cbr\u003eType: Window Visor\u003cbr\u003eMaterial: Polycarbonate\u003cbr\u003e\u003cbr\u003eGenuine replacement type front door glass made of thermoformed polycarbonate. It is stronger than acrylic. The weight of genuine door glass is approximately 4 kg, whereas this product weighs approximately 2 kg, which is approximately 50% lighter.\u003cbr\u003e\u003cbr\u003e\n\nPrice is for left and right set (1 car).\u003cbr\u003e\nThis product is a competition part.\u003cbr\u003e\u003cbr\u003e2 pieces included!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eRX-8 | SE3P Zenki | 2003-2008 | NA | 13B-MSP | R\u003cbr\u003eRX-8 | SE3P Kouki | 2008-2013 | NA | 13B-MSP | R\u003c!--split--\u003e"}
Revolution - Polycarbonate Front window glasses set - Mazda - RX-8 SE3P - RSE3-PG - Rzcrew Garage

Revolution - Polycarbonate Front window glasses set - Mazda - RX-8 SE3P

$1,359.92

Specifications:Manufacturer: RevolutionReference Number: RSE3-PGType: Window VisorMaterial: PolycarbonateGenuine replacement type front door glass made of thermoformed polycarbonate. It is stronger than acrylic. The weight of genuine door glass is approximately 4 kg, whereas this product weighs approximately 2 kg, which is approximately 50% ligh...


More Info
18% OFF
RRP Racing service -  Middle Temp Thermostat (75 Deg C) - Suzuki - Swift Sport ZC31S - E32-300A - RZCREWGARAGE
{"id":2095459139681,"title":"RRP Racing service Middle Temp Thermostat (75 Deg C) Suzuki Swift Sport ZC31S","handle":"rrp-racing-service-middle-temp-thermostat-75-deg-c-suzuki-swift-sport-zc31s-e32-300a","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RRP Racing service\u003cbr\u003ePart Number: E32-300A\u003cbr\u003eOpening temperature: 75 Deg C\u003cbr\u003e\u003cbr\u003eSwift's temperature control is very severe. Earls decided to sell middle temp thermostats from many test results such as supercharger and super ECU. \nIt turned out that there are many cases where the performance of the engine has not been fully achieved with the conventional low temperature thermostat (the one at about 65 degrees). When using a low-temp thermostat, the temperature was too low during driving, leading to power down and fuel consumption down, and I sometimes felt that the power and response were bad although I did not know what it was. If the water temperature drops below 80 degrees, the computer may misunderstand that the engine is cold and the operation of variable valve and electronic throttle etc. may become worse and the engine performance may be suppressed.\u003cbr\u003e\u003cbr\u003e\n\n\nThe engine performance will go down without knowing it. However, it is better to lower the water temperature properly as much as possible, so I thought about the middle temp thermostat. \nBy using this thermostat, it is possible to always keep the temperature from 80 degrees to 95 degrees at which the performance of the engine can be obtained the most, and you can use it with confidence. \nPlease try it!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC31S | 2004-2010 | NA | M16A | I4\u003c!--split--\u003eSwift Sport | ZC31S | 2004-2010 | NA | M16A | I4\u003cbr\u003e","published_at":"2019-04-26T16:22:39+08:00","created_at":"2019-04-26T16:22:40+08:00","vendor":"RRP Racing service","type":"Thermostats","tags":["2004","2005","2006","2007","2008","2009","2010","cooling","jp1","rrp-racing-service","suzuki","swift-sport-zc31s-2004-2010-na-m16a-i4","thermostats","ws118"],"price":4838,"price_min":4838,"price_max":4838,"available":true,"price_varies":false,"compare_at_price":5900,"compare_at_price_min":5900,"compare_at_price_max":5900,"compare_at_price_varies":false,"variants":[{"id":19755695374433,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"E32-300A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"RRP Racing service Middle Temp Thermostat (75 Deg C) Suzuki Swift Sport ZC31S","public_title":null,"options":["Default Title"],"price":4838,"weight":500,"compare_at_price":5900,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/E32-300A_5489bf9b-73c0-4589-988b-0f8eccf1897d.jpg?v=1710179453"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/E32-300A_5489bf9b-73c0-4589-988b-0f8eccf1897d.jpg?v=1710179453","options":["Title"],"media":[{"alt":"RRP Racing service - Middle Temp Thermostat (75 Deg C) - Suzuki - Swift Sport ZC31S - E32-300A - RZCREWGARAGE","id":26388492615862,"position":1,"preview_image":{"aspect_ratio":1.333,"height":450,"width":600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/E32-300A_5489bf9b-73c0-4589-988b-0f8eccf1897d.jpg?v=1710179453"},"aspect_ratio":1.333,"height":450,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/E32-300A_5489bf9b-73c0-4589-988b-0f8eccf1897d.jpg?v=1710179453","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RRP Racing service\u003cbr\u003ePart Number: E32-300A\u003cbr\u003eOpening temperature: 75 Deg C\u003cbr\u003e\u003cbr\u003eSwift's temperature control is very severe. Earls decided to sell middle temp thermostats from many test results such as supercharger and super ECU. \nIt turned out that there are many cases where the performance of the engine has not been fully achieved with the conventional low temperature thermostat (the one at about 65 degrees). When using a low-temp thermostat, the temperature was too low during driving, leading to power down and fuel consumption down, and I sometimes felt that the power and response were bad although I did not know what it was. If the water temperature drops below 80 degrees, the computer may misunderstand that the engine is cold and the operation of variable valve and electronic throttle etc. may become worse and the engine performance may be suppressed.\u003cbr\u003e\u003cbr\u003e\n\n\nThe engine performance will go down without knowing it. However, it is better to lower the water temperature properly as much as possible, so I thought about the middle temp thermostat. \nBy using this thermostat, it is possible to always keep the temperature from 80 degrees to 95 degrees at which the performance of the engine can be obtained the most, and you can use it with confidence. \nPlease try it!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC31S | 2004-2010 | NA | M16A | I4\u003c!--split--\u003eSwift Sport | ZC31S | 2004-2010 | NA | M16A | I4\u003cbr\u003e"}
RRP Racing service -  Middle Temp Thermostat (75 Deg C) - Suzuki - Swift Sport ZC31S - E32-300A - RZCREWGARAGE

RRP Racing service Middle Temp Thermostat (75 Deg C) Suzuki Swift Sport ZC31S

$48.38

Specifications:Manufacturer: RRP Racing servicePart Number: E32-300AOpening temperature: 75 Deg CSwift's temperature control is very severe. Earls decided to sell middle temp thermostats from many test results such as supercharger and super ECU. It turned out that there are many cases where the performance of the engine has not been fully achie...


More Info
10% OFF
RRP Racing service - 57.5mm Throttle Body - ZC31S - E-207N
{"id":1451464687713,"title":"RRP Racing service - 57.5mm Throttle Body - Suzuki - Swift Sport ZC31S","handle":"rrp-racing-service-57-5mm-throttle-body-zc31s-e-207n","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RRP Racing service\u003cbr\u003eReference Number: E-207N\u003cbr\u003eThrottle Body Diameter: 57.5mm\u003cbr\u003e\u003cbr\u003eRRP Big Throttle Kit pulls out the maximum engine performance with a large diameter of throttle with more than 10% bigger than normal throttle which enable to output the power and inhales the resistance, and also will perform the response up your engine and pedal work. Decreasing the intake resistance performs more engine power and throttle response with the best processing technology made. This product is a necessary item for power up your engine from beginners to race-drivers with best processing technology targeting the best run of Swift car. You can feel the difference of engine feelings you've never experienced.\u003cbr\u003e\u003cbr\u003eSpecification:\u003cbr\u003eThrottle body opening (mm): 55mm to 57.5mm\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC31S | 2004-2010 | NA | M16A | I4\u003c!--split--\u003e","published_at":"2018-11-12T18:19:08+08:00","created_at":"2018-11-12T18:19:09+08:00","vendor":"RRP Racing service","type":"Throttle Bodies","tags":["2004","2005","2006","2007","2008","2009","2010","intake","jp1","rrp-racing-service","suzuki","swift-sport-zc31s-2004-2010-na-m16a-i4","throttle-bodies","ws110"],"price":144990,"price_min":144990,"price_max":144990,"available":true,"price_varies":false,"compare_at_price":161100,"compare_at_price_min":161100,"compare_at_price_max":161100,"compare_at_price_varies":false,"variants":[{"id":12484796645473,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"E-207N","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"RRP Racing service - 57.5mm Throttle Body - Suzuki - Swift Sport ZC31S","public_title":null,"options":["Default Title"],"price":144990,"weight":1200,"compare_at_price":161100,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/E-207N_b8ff4d31-b551-4134-8708-12b5a09e9997.jpg?v=1710168342"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/E-207N_b8ff4d31-b551-4134-8708-12b5a09e9997.jpg?v=1710168342","options":["Title"],"media":[{"alt":"RRP Racing service - 57.5mm Throttle Body - ZC31S - E-207N","id":25545276260534,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/E-207N_b8ff4d31-b551-4134-8708-12b5a09e9997.jpg?v=1710168342"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/E-207N_b8ff4d31-b551-4134-8708-12b5a09e9997.jpg?v=1710168342","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RRP Racing service\u003cbr\u003eReference Number: E-207N\u003cbr\u003eThrottle Body Diameter: 57.5mm\u003cbr\u003e\u003cbr\u003eRRP Big Throttle Kit pulls out the maximum engine performance with a large diameter of throttle with more than 10% bigger than normal throttle which enable to output the power and inhales the resistance, and also will perform the response up your engine and pedal work. Decreasing the intake resistance performs more engine power and throttle response with the best processing technology made. This product is a necessary item for power up your engine from beginners to race-drivers with best processing technology targeting the best run of Swift car. You can feel the difference of engine feelings you've never experienced.\u003cbr\u003e\u003cbr\u003eSpecification:\u003cbr\u003eThrottle body opening (mm): 55mm to 57.5mm\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC31S | 2004-2010 | NA | M16A | I4\u003c!--split--\u003e"}
RRP Racing service - 57.5mm Throttle Body - ZC31S - E-207N

RRP Racing service - 57.5mm Throttle Body - Suzuki - Swift Sport ZC31S

$1,449.90

Specifications:Manufacturer: RRP Racing serviceReference Number: E-207NThrottle Body Diameter: 57.5mmRRP Big Throttle Kit pulls out the maximum engine performance with a large diameter of throttle with more than 10% bigger than normal throttle which enable to output the power and inhales the resistance, and also will perform the response up your...


More Info
12% OFF
RRP Racing service - Lightweight Flywheel - Suzuki - Swift Sport ZC31S - D-114 - Rzcrewgarage
{"id":4021128855649,"title":"RRP Racing service - Lightweight Flywheel - Suzuki - Swift Sport ZC31S","handle":"rrp-racing-service-lightweight-flywheel-suzuki-swift-sport-zc31s-d-114","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RRP Racing service\u003cbr\u003eWeight: 4.5kg\u003cbr\u003e\u003cbr\u003eLightweight flywheels increase throttle response and aide in overall vehicle performance. Whilst retaining the strength and durability of the OEM part. Chromoly construction. Developed to find the best balance by Bench testing, Street and Circuit.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC31S | 2004-2010 | NA | M16A | I4\u003c!--split--\u003e","published_at":"2019-09-02T16:08:02+08:00","created_at":"2019-09-02T16:08:03+08:00","vendor":"RRP Racing service","type":"Flywheels","tags":["2004","2005","2006","2007","2008","2009","2010","4.5","flywheels","jp1","rrp-racing-service","suzuki","swift-sport-zc31s-2004-2010-na-m16a-i4","ws112"],"price":41360,"price_min":41360,"price_max":41360,"available":true,"price_varies":false,"compare_at_price":47000,"compare_at_price_min":47000,"compare_at_price_max":47000,"compare_at_price_varies":false,"variants":[{"id":29853866492001,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"D-114","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"RRP Racing service - Lightweight Flywheel - Suzuki - Swift Sport ZC31S","public_title":null,"options":["Default Title"],"price":41360,"weight":5500,"compare_at_price":47000,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/D-114G_663e5dc0-c470-4d43-83b9-9b588f9b4cdc.jpg?v=1710189209"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/D-114G_663e5dc0-c470-4d43-83b9-9b588f9b4cdc.jpg?v=1710189209","options":["Title"],"media":[{"alt":"RRP Racing service - Lightweight Flywheel - Suzuki - Swift Sport ZC31S - D-114 - Rzcrewgarage","id":25423246786742,"position":1,"preview_image":{"aspect_ratio":1.333,"height":450,"width":600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/D-114G_663e5dc0-c470-4d43-83b9-9b588f9b4cdc.jpg?v=1710189209"},"aspect_ratio":1.333,"height":450,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/D-114G_663e5dc0-c470-4d43-83b9-9b588f9b4cdc.jpg?v=1710189209","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RRP Racing service\u003cbr\u003eWeight: 4.5kg\u003cbr\u003e\u003cbr\u003eLightweight flywheels increase throttle response and aide in overall vehicle performance. Whilst retaining the strength and durability of the OEM part. Chromoly construction. Developed to find the best balance by Bench testing, Street and Circuit.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC31S | 2004-2010 | NA | M16A | I4\u003c!--split--\u003e"}
RRP Racing service - Lightweight Flywheel - Suzuki - Swift Sport ZC31S - D-114 - Rzcrewgarage

RRP Racing service - Lightweight Flywheel - Suzuki - Swift Sport ZC31S

$413.60

Specifications:Manufacturer: RRP Racing serviceWeight: 4.5kgLightweight flywheels increase throttle response and aide in overall vehicle performance. Whilst retaining the strength and durability of the OEM part. Chromoly construction. Developed to find the best balance by Bench testing, Street and Circuit.Taxes:Singapore and Malaysia: All import...


More Info
11% OFF
RRP Racing service - Reinforced Clutch Push Rod - Suzuki - ZC31S - D-101 - Rzcrewgarage
{"id":2105918947425,"title":"RRP Racing service - Reinforced Clutch Push Rod - Suzuki - Swift Sport ZC31S","handle":"rrp-racing-service-reinforced-clutch-push-rod-suzuki-zc31s-d-101","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RRP Racing service\u003cbr\u003eProduct Type: Reinforced Fork\u003cbr\u003e\u003cbr\u003eThe RRP Reinforced Clutch push rod is a popular item. It replaces the weak Plastic OEM unit which becomes brittle after years of usage. \nLocated on top of the gearbox, it is a fast fix to ensure long lasting and ultimate precision while shifting.\nPlease refer to the picture for comparison between the OEM push rod and the RRP Unit!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC31S | 2004-2010 | NA | M16A | I4\u003c!--split--\u003e","published_at":"2019-05-02T14:45:19+08:00","created_at":"2019-05-02T14:45:19+08:00","vendor":"RRP Racing service","type":"Clutch Parts and Kits","tags":["2004","2005","2006","2007","2008","2009","2010","clutch-parts-and-kits","jp1","reinforced-fork","rrp-racing-service","suzuki","swift-sport-zc31s-2004-2010-na-m16a-i4","ws111"],"price":10502,"price_min":10502,"price_max":10502,"available":true,"price_varies":false,"compare_at_price":11800,"compare_at_price_min":11800,"compare_at_price_max":11800,"compare_at_price_varies":false,"variants":[{"id":19813751652449,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"D-101","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"RRP Racing service - Reinforced Clutch Push Rod - Suzuki - Swift Sport ZC31S","public_title":null,"options":["Default Title"],"price":10502,"weight":200,"compare_at_price":11800,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/D-101_508a100f-43ab-4f29-b336-c8c85bdeea13.jpg?v=1710179534"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/D-101_508a100f-43ab-4f29-b336-c8c85bdeea13.jpg?v=1710179534","options":["Title"],"media":[{"alt":"RRP Racing service - Reinforced Clutch Push Rod - Suzuki - ZC31S - D-101 - Rzcrewgarage","id":25423244001462,"position":1,"preview_image":{"aspect_ratio":1.333,"height":450,"width":600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/D-101_508a100f-43ab-4f29-b336-c8c85bdeea13.jpg?v=1710179534"},"aspect_ratio":1.333,"height":450,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/D-101_508a100f-43ab-4f29-b336-c8c85bdeea13.jpg?v=1710179534","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RRP Racing service\u003cbr\u003eProduct Type: Reinforced Fork\u003cbr\u003e\u003cbr\u003eThe RRP Reinforced Clutch push rod is a popular item. It replaces the weak Plastic OEM unit which becomes brittle after years of usage. \nLocated on top of the gearbox, it is a fast fix to ensure long lasting and ultimate precision while shifting.\nPlease refer to the picture for comparison between the OEM push rod and the RRP Unit!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC31S | 2004-2010 | NA | M16A | I4\u003c!--split--\u003e"}
RRP Racing service - Reinforced Clutch Push Rod - Suzuki - ZC31S - D-101 - Rzcrewgarage

RRP Racing service - Reinforced Clutch Push Rod - Suzuki - Swift Sport ZC31S

$105.02

Specifications:Manufacturer: RRP Racing serviceProduct Type: Reinforced ForkThe RRP Reinforced Clutch push rod is a popular item. It replaces the weak Plastic OEM unit which becomes brittle after years of usage. Located on top of the gearbox, it is a fast fix to ensure long lasting and ultimate precision while shifting. Please refer to the pict...


More Info
3% OFF
RRP Racing service - Reinforced Clutch Release Bearing - Suzuki - ZC31S - D-115 - Rzcrewgarage
{"id":2105918488673,"title":"RRP Racing service - Reinforced Clutch Release Bearing - Suzuki - Swift Sport ZC31S","handle":"rrp-racing-service-reinforced-clutch-release-bearing-suzuki-zc31s-d-115","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RRP Racing service\u003cbr\u003eProduct Type: Clutch Release Bearing\u003cbr\u003e\u003cbr\u003eThe RRP Reinforced Release Shaft is a popular item. Replace the weak OEM unit which may break when used intensively. It is a cheap upgrade to be installed during a clutch replacement or a multi plate clutch upgrade.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC31S | 2004-2010 | NA | M16A | I4\u003c!--split--\u003e","published_at":"2019-05-02T14:44:58+08:00","created_at":"2019-05-02T14:44:59+08:00","vendor":"RRP Racing service","type":"Clutch Parts and Kits","tags":["2004","2005","2006","2007","2008","2009","2010","clutch-parts-and-kits","clutch-release-bearing","jp1","rrp-racing-service","suzuki","swift-sport-zc31s-2004-2010-na-m16a-i4","ws13"],"price":5238,"price_min":5238,"price_max":5238,"available":true,"price_varies":false,"compare_at_price":5400,"compare_at_price_min":5400,"compare_at_price_max":5400,"compare_at_price_varies":false,"variants":[{"id":19813748605025,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"D-115","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"RRP Racing service - Reinforced Clutch Release Bearing - Suzuki - Swift Sport ZC31S","public_title":null,"options":["Default Title"],"price":5238,"weight":900,"compare_at_price":5400,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/D-115_882275bd-adc7-4805-ba91-a48b91d9dc52.jpg?v=1710179520"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/D-115_882275bd-adc7-4805-ba91-a48b91d9dc52.jpg?v=1710179520","options":["Title"],"media":[{"alt":"RRP Racing service - Reinforced Clutch Release Bearing - Suzuki - ZC31S - D-115 - Rzcrewgarage","id":25423240429750,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/D-115_882275bd-adc7-4805-ba91-a48b91d9dc52.jpg?v=1710179520"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/D-115_882275bd-adc7-4805-ba91-a48b91d9dc52.jpg?v=1710179520","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RRP Racing service\u003cbr\u003eProduct Type: Clutch Release Bearing\u003cbr\u003e\u003cbr\u003eThe RRP Reinforced Release Shaft is a popular item. Replace the weak OEM unit which may break when used intensively. It is a cheap upgrade to be installed during a clutch replacement or a multi plate clutch upgrade.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC31S | 2004-2010 | NA | M16A | I4\u003c!--split--\u003e"}
RRP Racing service - Reinforced Clutch Release Bearing - Suzuki - ZC31S - D-115 - Rzcrewgarage

RRP Racing service - Reinforced Clutch Release Bearing - Suzuki - Swift Sport ZC31S

$52.38

Specifications:Manufacturer: RRP Racing serviceProduct Type: Clutch Release BearingThe RRP Reinforced Release Shaft is a popular item. Replace the weak OEM unit which may break when used intensively. It is a cheap upgrade to be installed during a clutch replacement or a multi plate clutch upgrade.Taxes:Singapore and Malaysia: All import taxes ar...


More Info
3% OFF
RRP Racing service - Reinforced Release Shaft II - Suzuki - ZC31S - D-102A - Rzcrewgarage
{"id":2105918521441,"title":"RRP Racing service - Reinforced Release Shaft II - Suzuki - Swift Sport ZC31S","handle":"rrp-racing-service-reinforced-release-shaft-ii-suzuki-zc31s-d-102a","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RRP Racing service\u003cbr\u003eProduct Type: Clutch Release Bearing\u003cbr\u003e\u003cbr\u003eThe RRP Reinforced Release Shaft is a popular item. Replace the weak OEM unit which may break when used intensively. It is a cheap upgrade to be installed during a clutch replacement or a multi plate clutch upgrade. Please refer to the picture for comparaison between the OEM fork and the RRP Unit!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC31S | 2004-2010 | NA | M16A | I4\u003c!--split--\u003e","published_at":"2019-05-02T14:44:59+08:00","created_at":"2019-05-02T14:45:01+08:00","vendor":"RRP Racing service","type":"Clutch Parts and Kits","tags":["2004","2005","2006","2007","2008","2009","2010","clutch-parts-and-kits","clutch-release-bearing","jp1","rrp-racing-service","suzuki","swift-sport-zc31s-2004-2010-na-m16a-i4","ws13"],"price":17751,"price_min":17751,"price_max":17751,"available":true,"price_varies":false,"compare_at_price":18300,"compare_at_price_min":18300,"compare_at_price_max":18300,"compare_at_price_varies":false,"variants":[{"id":19813748637793,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"D-102A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"RRP Racing service - Reinforced Release Shaft II - Suzuki - Swift Sport ZC31S","public_title":null,"options":["Default Title"],"price":17751,"weight":1200,"compare_at_price":18300,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/D-102A_13108c33-bdea-48e4-8916-f0b76b87d8ee.jpg?v=1710179520"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/D-102A_13108c33-bdea-48e4-8916-f0b76b87d8ee.jpg?v=1710179520","options":["Title"],"media":[{"alt":"RRP Racing service - Reinforced Release Shaft II - Suzuki - ZC31S - D-102A - Rzcrewgarage","id":25423241019574,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/D-102A_13108c33-bdea-48e4-8916-f0b76b87d8ee.jpg?v=1710179520"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/D-102A_13108c33-bdea-48e4-8916-f0b76b87d8ee.jpg?v=1710179520","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RRP Racing service\u003cbr\u003eProduct Type: Clutch Release Bearing\u003cbr\u003e\u003cbr\u003eThe RRP Reinforced Release Shaft is a popular item. Replace the weak OEM unit which may break when used intensively. It is a cheap upgrade to be installed during a clutch replacement or a multi plate clutch upgrade. Please refer to the picture for comparaison between the OEM fork and the RRP Unit!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC31S | 2004-2010 | NA | M16A | I4\u003c!--split--\u003e"}
RRP Racing service - Reinforced Release Shaft II - Suzuki - ZC31S - D-102A - Rzcrewgarage

RRP Racing service - Reinforced Release Shaft II - Suzuki - Swift Sport ZC31S

$177.51

Specifications:Manufacturer: RRP Racing serviceProduct Type: Clutch Release BearingThe RRP Reinforced Release Shaft is a popular item. Replace the weak OEM unit which may break when used intensively. It is a cheap upgrade to be installed during a clutch replacement or a multi plate clutch upgrade. Please refer to the picture for comparaison betw...


More Info
3% OFF
RRP Racing service - Reinforced Release Shaft II and Bearing kit - Suzuki - ZC31S - D-102B - Rzcrewgarage
{"id":2105918554209,"title":"RRP Racing service - Reinforced Release Shaft II and Bearing kit - Suzuki - Swift Sport ZC31S","handle":"rrp-racing-service-reinforced-release-shaft-ii-and-bearing-kit-suzuki-zc31s-d-102b","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RRP Racing service\u003cbr\u003eProduct Type: Clutch Release Bearing,Reinforced Fork\u003cbr\u003e\u003cbr\u003eThe RRP Reinforced Release Shaft is a popular item. Replace the weak OEM unit which may break when used intensively. It is a cheap upgrade to be installed during a clutch replacement or a multi plate clutch upgrade. Please refer to the picture for comparaison between the OEM fork and the RRP Unit!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC31S | 2004-2010 | NA | M16A | I4\u003c!--split--\u003e","published_at":"2019-05-02T14:45:01+08:00","created_at":"2019-05-02T14:45:02+08:00","vendor":"RRP Racing service","type":"Clutch Parts and Kits","tags":["2004","2005","2006","2007","2008","2009","2010","clutch-parts-and-kits","clutch-release-bearing","jp1","reinforced-fork","rrp-racing-service","suzuki","swift-sport-zc31s-2004-2010-na-m16a-i4","ws13"],"price":21922,"price_min":21922,"price_max":21922,"available":true,"price_varies":false,"compare_at_price":22600,"compare_at_price_min":22600,"compare_at_price_max":22600,"compare_at_price_varies":false,"variants":[{"id":19813748670561,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"D-102B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"RRP Racing service - Reinforced Release Shaft II and Bearing kit - Suzuki - Swift Sport ZC31S","public_title":null,"options":["Default Title"],"price":21922,"weight":1800,"compare_at_price":22600,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/D-102B_b1c8db96-bd30-4495-aefe-11a92c8e272b.jpg?v=1710179520"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/D-102B_b1c8db96-bd30-4495-aefe-11a92c8e272b.jpg?v=1710179520","options":["Title"],"media":[{"alt":"RRP Racing service - Reinforced Release Shaft II and Bearing kit - Suzuki - ZC31S - D-102B - Rzcrewgarage","id":25423241609398,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/D-102B_b1c8db96-bd30-4495-aefe-11a92c8e272b.jpg?v=1710179520"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/D-102B_b1c8db96-bd30-4495-aefe-11a92c8e272b.jpg?v=1710179520","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RRP Racing service\u003cbr\u003eProduct Type: Clutch Release Bearing,Reinforced Fork\u003cbr\u003e\u003cbr\u003eThe RRP Reinforced Release Shaft is a popular item. Replace the weak OEM unit which may break when used intensively. It is a cheap upgrade to be installed during a clutch replacement or a multi plate clutch upgrade. Please refer to the picture for comparaison between the OEM fork and the RRP Unit!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC31S | 2004-2010 | NA | M16A | I4\u003c!--split--\u003e"}
RRP Racing service - Reinforced Release Shaft II and Bearing kit - Suzuki - ZC31S - D-102B - Rzcrewgarage

RRP Racing service - Reinforced Release Shaft II and Bearing kit - Suzuki - Swift Sport ZC31S

$219.22

Specifications:Manufacturer: RRP Racing serviceProduct Type: Clutch Release Bearing,Reinforced ForkThe RRP Reinforced Release Shaft is a popular item. Replace the weak OEM unit which may break when used intensively. It is a cheap upgrade to be installed during a clutch replacement or a multi plate clutch upgrade. Please refer to the picture for ...


More Info
35% OFF
RS-R - Suspension DOWN - Nissan Serena CC25 - N700W    - RZCrewGarage
{"id":7964839542966,"title":"RS-R - Suspension DOWN - Nissan Serena CC25","handle":"rs-r-suspension-down-nissan-serena-cc25-n700w","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RS-R\u003cbr\u003ePart Number: N700W   \u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eLowering Height: 30?35mm\u003cbr\u003eSpring Rate: 3.51Kg\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eLowering Height: 40?35mm\u003cbr\u003eSpring Rate: 6.12Kg\u003cbr\u003e\u003cbr\u003eRS-R have thoroughly pursued the down amount that is not too high or too low, and set it for each car model.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eWRX STi | VAB | 2014-2018 | TC | FA20F | H4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable springs are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2024-05-28T17:02:05+08:00","created_at":"2024-05-28T16:59:07+08:00","vendor":"RS-R","type":"Springs","tags":["2005","2006","2007","2008","2009","2010","jp1","lowering-springs","nissan","rs-r","serena-cc25-2005-2008-na-mr20de-i4","serena-cc25-2008-2010-na-mr20de-i4","springs","ws135"],"price":32630,"price_min":32630,"price_max":32630,"available":true,"price_varies":false,"compare_at_price":50200,"compare_at_price_min":50200,"compare_at_price_max":50200,"compare_at_price_varies":false,"variants":[{"id":43189748433078,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"N700W   ","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"RS-R - Suspension DOWN - Nissan Serena CC25","public_title":null,"options":["Default Title"],"price":32630,"weight":9100,"compare_at_price":50200,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/H780THD_85c77756-8cec-41a5-8b7f-65817f7b333a.jpg?v=1723092607"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/H780THD_85c77756-8cec-41a5-8b7f-65817f7b333a.jpg?v=1723092607","options":["Title"],"media":[{"alt":"RS-R - Suspension DOWN - Nissan Serena CC25 - N700W    - RZCrewGarage","id":27930130809014,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/H780THD_85c77756-8cec-41a5-8b7f-65817f7b333a.jpg?v=1723092607"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/H780THD_85c77756-8cec-41a5-8b7f-65817f7b333a.jpg?v=1723092607","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RS-R\u003cbr\u003ePart Number: N700W   \u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eLowering Height: 30?35mm\u003cbr\u003eSpring Rate: 3.51Kg\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eLowering Height: 40?35mm\u003cbr\u003eSpring Rate: 6.12Kg\u003cbr\u003e\u003cbr\u003eRS-R have thoroughly pursued the down amount that is not too high or too low, and set it for each car model.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eWRX STi | VAB | 2014-2018 | TC | FA20F | H4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable springs are important for your safety, don't settle for cheap parts that fail. Buy original!"}
RS-R - Suspension DOWN - Nissan Serena CC25 - N700W    - RZCrewGarage

RS-R - Suspension DOWN - Nissan Serena CC25

$326.30

Specifications:Manufacturer: RS-RPart Number: N700W   Front:Lowering Height: 30?35mmSpring Rate: 3.51KgRear:Lowering Height: 40?35mmSpring Rate: 6.12KgRS-R have thoroughly pursued the down amount that is not too high or too low, and set it for each car model.Taxes:Singapore and Malaysia: All import taxes are included in our pricing.European Tva,...


More Info
34% OFF
RS-R - Ti2000 DOWN - Nissan Serena CC25 - N700TW - RZCrewGarage
{"id":7964839444662,"title":"RS-R - Ti2000 DOWN - Nissan Serena CC25","handle":"rs-r-ti2000-down-nissan-serena-cc25-n700tw","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RS-R\u003cbr\u003ePart Number: N700TW\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eLowering Height: 30?35mm\u003cbr\u003eSpring Rate: 3.51Kg\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eLowering Height: 40?35mm\u003cbr\u003eSpring Rate: 6.12Kg\u003cbr\u003e\u003cbr\u003eRS-R have thoroughly pursued the down amount that is not too high or too low, and set it for each car model.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eWRX STi | VAB | 2014-2018 | TC | FA20F | H4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable springs are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2024-05-28T17:01:52+08:00","created_at":"2024-05-28T16:59:04+08:00","vendor":"RS-R","type":"Springs","tags":["2005","2006","2007","2008","2009","2010","jp1","lowering-springs","nissan","rs-r","serena-cc25-2005-2008-na-mr20de-i4","serena-cc25-2008-2010-na-mr20de-i4","springs","ws134"],"price":42834,"price_min":42834,"price_max":42834,"available":true,"price_varies":false,"compare_at_price":64900,"compare_at_price_min":64900,"compare_at_price_max":64900,"compare_at_price_varies":false,"variants":[{"id":43189747843254,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"N700TW","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"RS-R - Ti2000 DOWN - Nissan Serena CC25","public_title":null,"options":["Default Title"],"price":42834,"weight":9100,"compare_at_price":64900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/H780THD_eab38266-713b-4d12-a162-a9605cccf272.jpg?v=1723092609"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/H780THD_eab38266-713b-4d12-a162-a9605cccf272.jpg?v=1723092609","options":["Title"],"media":[{"alt":"RS-R - Ti2000 DOWN - Nissan Serena CC25 - N700TW - RZCrewGarage","id":27930130612406,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/H780THD_eab38266-713b-4d12-a162-a9605cccf272.jpg?v=1723092609"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/H780THD_eab38266-713b-4d12-a162-a9605cccf272.jpg?v=1723092609","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RS-R\u003cbr\u003ePart Number: N700TW\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eLowering Height: 30?35mm\u003cbr\u003eSpring Rate: 3.51Kg\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eLowering Height: 40?35mm\u003cbr\u003eSpring Rate: 6.12Kg\u003cbr\u003e\u003cbr\u003eRS-R have thoroughly pursued the down amount that is not too high or too low, and set it for each car model.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eWRX STi | VAB | 2014-2018 | TC | FA20F | H4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable springs are important for your safety, don't settle for cheap parts that fail. Buy original!"}
RS-R - Ti2000 DOWN - Nissan Serena CC25 - N700TW - RZCrewGarage

RS-R - Ti2000 DOWN - Nissan Serena CC25

$428.34

Specifications:Manufacturer: RS-RPart Number: N700TWFront:Lowering Height: 30?35mmSpring Rate: 3.51KgRear:Lowering Height: 40?35mmSpring Rate: 6.12KgRS-R have thoroughly pursued the down amount that is not too high or too low, and set it for each car model.Taxes:Singapore and Malaysia: All import taxes are included in our pricing.European Tva, I...


More Info