2008

{"id":7364723245238,"title":"K-Tuned - 72mm Drive By Wire Throttle Body - Honda Civic Type R FD2R","handle":"k-tuned-72mm-drive-by-wire-throttle-body-honda-civic-type-r-fd2r-ktd-72d-rbc","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: K-Tuned\u003cbr\u003eReference Number: KTD-72D-RBC\u003cbr\u003eThrottle Body Diameter: 72mm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eOur 72mm Drive By Wire Throttle Body is direct bolt on to RBC\/RRC manifolds and others with the same bolt pattern. It is a true 72mm bore which is larger than ZDX throttle at the butterfly. This throttle body requires some form of engine management (Flashpro) to properly manage the increased airflow. We used the stock configuration and design using an OEM connector to avoid jumper harness. This gives it an almost OEM look when installed. Inside you will see the machined 72mm bore and brass butterfly. There are two 1\/8NPT vacuum ports on the bottom which can be used for evap, brake booster, or vacuum reference. Included you will get a thermal gasket, mounting bolts, and two 1\/8NPT plugs.\u003cbr\u003e\u003cbr\u003e\n\nThe inlet will use a 3\" silicone coupler. You may need to change the coupler to match your intake.\u003cbr\u003e\u003cbr\u003e\n\nHow big is 72mm TB? We did some measurements and compared it to other stock and common options. We measured the area at the smallest opening since this would be the bottle neck in the system.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R | FD2R | 2007-2010 | NA | K20A | I4\u003c!--split--\u003e","published_at":"2022-06-10T14:27:58+08:00","created_at":"2022-06-10T14:23:39+08:00","vendor":"K-Tuned","type":"Throttle Bodies","tags":["2007","2008","2009","2010","civic-type-r-fd2r-2007-2010-na-k20a-i4","honda","intake","k-tuned","throttle-bodies","us1","ws18"],"price":53810,"price_min":53810,"price_max":53810,"available":true,"price_varies":false,"compare_at_price":51400,"compare_at_price_min":51400,"compare_at_price_max":51400,"compare_at_price_varies":false,"variants":[{"id":41537504641206,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"KTD-72D-RBC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"K-Tuned - 72mm Drive By Wire Throttle Body - Honda Civic Type R FD2R","public_title":null,"options":["Default Title"],"price":53810,"weight":3000,"compare_at_price":51400,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/k-tuned-72mm-drive-by-wire-throttle-body-honda-civic-type-r-fd2r-rzcrew.jpg?v=1710320620"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/k-tuned-72mm-drive-by-wire-throttle-body-honda-civic-type-r-fd2r-rzcrew.jpg?v=1710320620","options":["Title"],"media":[{"alt":"K-Tuned - 72mm Drive By Wire Throttle Body - Honda Civic Type R FD2R KTD-72D-RBC","id":25426642174134,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/k-tuned-72mm-drive-by-wire-throttle-body-honda-civic-type-r-fd2r-rzcrew.jpg?v=1710320620"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/k-tuned-72mm-drive-by-wire-throttle-body-honda-civic-type-r-fd2r-rzcrew.jpg?v=1710320620","width":1600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: K-Tuned\u003cbr\u003eReference Number: KTD-72D-RBC\u003cbr\u003eThrottle Body Diameter: 72mm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eOur 72mm Drive By Wire Throttle Body is direct bolt on to RBC\/RRC manifolds and others with the same bolt pattern. It is a true 72mm bore which is larger than ZDX throttle at the butterfly. This throttle body requires some form of engine management (Flashpro) to properly manage the increased airflow. We used the stock configuration and design using an OEM connector to avoid jumper harness. This gives it an almost OEM look when installed. Inside you will see the machined 72mm bore and brass butterfly. There are two 1\/8NPT vacuum ports on the bottom which can be used for evap, brake booster, or vacuum reference. Included you will get a thermal gasket, mounting bolts, and two 1\/8NPT plugs.\u003cbr\u003e\u003cbr\u003e\n\nThe inlet will use a 3\" silicone coupler. You may need to change the coupler to match your intake.\u003cbr\u003e\u003cbr\u003e\n\nHow big is 72mm TB? We did some measurements and compared it to other stock and common options. We measured the area at the smallest opening since this would be the bottle neck in the system.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R | FD2R | 2007-2010 | NA | K20A | I4\u003c!--split--\u003e"}

{"id":7364723310774,"title":"K-Tuned - 72mm Drive By Wire Throttle Body - Honda S2000 AP2","handle":"k-tuned-72mm-drive-by-wire-throttle-body-honda-s2000-ap2-ktd-72d-rbc","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: K-Tuned\u003cbr\u003eReference Number: KTD-72D-RBC\u003cbr\u003eThrottle Body Diameter: 72mm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eOur 72mm Drive By Wire Throttle Body is direct bolt on to RBC\/RRC manifolds and others with the same bolt pattern. It is a true 72mm bore which is larger than ZDX throttle at the butterfly. This throttle body requires some form of engine management (Flashpro) to properly manage the increased airflow. We used the stock configuration and design using an OEM connector to avoid jumper harness. This gives it an almost OEM look when installed. Inside you will see the machined 72mm bore and brass butterfly. There are two 1\/8NPT vacuum ports on the bottom which can be used for evap, brake booster, or vacuum reference. Included you will get a thermal gasket, mounting bolts, and two 1\/8NPT plugs.\u003cbr\u003e\u003cbr\u003e\n\nThe inlet will use a 3\" silicone coupler. You may need to change the coupler to match your intake.\u003cbr\u003e\u003cbr\u003e\n\nHow big is 72mm TB? We did some measurements and compared it to other stock and common options. We measured the area at the smallest opening since this would be the bottle neck in the system.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eS2000 | AP2 | 2003-2009 | NA | F22C | I4\u003c!--split--\u003e","published_at":"2022-06-10T14:28:01+08:00","created_at":"2022-06-10T14:23:42+08:00","vendor":"K-Tuned","type":"Throttle Bodies","tags":["2003","2004","2005","2006","2007","2008","2009","honda","intake","k-tuned","s2000-ap2-2003-2009-na-f22c-i4","throttle-bodies","us1","ws18"],"price":53810,"price_min":53810,"price_max":53810,"available":true,"price_varies":false,"compare_at_price":51400,"compare_at_price_min":51400,"compare_at_price_max":51400,"compare_at_price_varies":false,"variants":[{"id":41537504706742,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"KTD-72D-RBC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"K-Tuned - 72mm Drive By Wire Throttle Body - Honda S2000 AP2","public_title":null,"options":["Default Title"],"price":53810,"weight":3000,"compare_at_price":51400,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/k-tuned-72mm-drive-by-wire-throttle-body-honda-s2000-ap2-rzcrew.jpg?v=1710320620"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/k-tuned-72mm-drive-by-wire-throttle-body-honda-s2000-ap2-rzcrew.jpg?v=1710320620","options":["Title"],"media":[{"alt":"K-Tuned - 72mm Drive By Wire Throttle Body - Honda S2000 AP2 KTD-72D-RBC","id":25426642337974,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/k-tuned-72mm-drive-by-wire-throttle-body-honda-s2000-ap2-rzcrew.jpg?v=1710320620"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/k-tuned-72mm-drive-by-wire-throttle-body-honda-s2000-ap2-rzcrew.jpg?v=1710320620","width":1600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: K-Tuned\u003cbr\u003eReference Number: KTD-72D-RBC\u003cbr\u003eThrottle Body Diameter: 72mm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eOur 72mm Drive By Wire Throttle Body is direct bolt on to RBC\/RRC manifolds and others with the same bolt pattern. It is a true 72mm bore which is larger than ZDX throttle at the butterfly. This throttle body requires some form of engine management (Flashpro) to properly manage the increased airflow. We used the stock configuration and design using an OEM connector to avoid jumper harness. This gives it an almost OEM look when installed. Inside you will see the machined 72mm bore and brass butterfly. There are two 1\/8NPT vacuum ports on the bottom which can be used for evap, brake booster, or vacuum reference. Included you will get a thermal gasket, mounting bolts, and two 1\/8NPT plugs.\u003cbr\u003e\u003cbr\u003e\n\nThe inlet will use a 3\" silicone coupler. You may need to change the coupler to match your intake.\u003cbr\u003e\u003cbr\u003e\n\nHow big is 72mm TB? We did some measurements and compared it to other stock and common options. We measured the area at the smallest opening since this would be the bottle neck in the system.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eS2000 | AP2 | 2003-2009 | NA | F22C | I4\u003c!--split--\u003e"}

{"id":7364666851510,"title":"K-Tuned K24 Intake Manifold Adapter - Honda","handle":"k-tuned-k24-intake-manifold-adapter-honda-ktd-k24-im2","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: K-Tuned\u003cbr\u003eReference Number: KTD-K24-IM2\u003cbr\u003eIntake Type: Intake Manifold\u003cbr\u003e\u003cbr\u003eThe K24 Intake Manifold Adapter is a simple and easy way to install K20 style manifold on K24 heads. The recirculation fitting on K24s is typically part of the intake manifold which isn’t on K20 intake manifolds. We have designed the adapter to work with all K24 heads including the K24Z-Series (R40) heads. This can also be used to install K20 manifolds or cut RBC manifolds on 9th gen Civic si as the water bypass is slightly different and you will not need an intake manifold adapter when using the adapter. The adapter lowers intake air temps as coolant is no longer connected the intake manifold. Hondata has shown that intake air density will drop 1% for every 5°F increase in intake temperature. This is wasted power that can easily be gained back by using the adapter. The adapter also features a 1\/8 NPT port for a coolant temp sensor commonly used in swap cars.\n\n\nThe Intake Manifold Adapter can be installed either using our spring loaded tab or by tapping the head. We use Honda Bond or similar gasket maker as it provides a strong seal and when using the spring loaded tab when the adapter isn’t under pressure there will be no chance of leak. The spring loaded tab holds the adapter down with constant spring pressure to ensure a tight fit and seal. The other option is using the provided blind hole you can easily tap the head for the second hole. Tapping the head will require a 6.5mm drill bit (to finish the blind hole in the adapter), 5mm drill bit (to drill the head), and M6x1.0 Tap. \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAccord | CL9 | 2002-2008 | NA | K24A3 | I4\u003c!--split--\u003e","published_at":"2022-06-10T11:28:46+08:00","created_at":"2022-06-10T11:25:50+08:00","vendor":"K-Tuned","type":"Intake Manifolds","tags":["2002","2003","2004","2005","2006","2007","2008","accord-cl9-2002-2008-na-k24a3-i4","honda","intake","intake-manifold","intake-manifolds","k-tuned","manifolds","us1","ws18"],"price":14460,"price_min":14460,"price_max":14460,"available":true,"price_varies":false,"compare_at_price":13800,"compare_at_price_min":13800,"compare_at_price_max":13800,"compare_at_price_varies":false,"variants":[{"id":41537213759670,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"KTD-K24-IM2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"K-Tuned K24 Intake Manifold Adapter - Honda","public_title":null,"options":["Default Title"],"price":14460,"weight":2000,"compare_at_price":13800,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/k-tuned-k24-intake-manifold-adapter-honda-rzcrew.jpg?v=1710320625"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/k-tuned-k24-intake-manifold-adapter-honda-rzcrew.jpg?v=1710320625","options":["Title"],"media":[{"alt":"K-Tuned K24 Intake Manifold Adapter - Honda KTD-K24-IM2","id":25426641977526,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/k-tuned-k24-intake-manifold-adapter-honda-rzcrew.jpg?v=1710320625"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/k-tuned-k24-intake-manifold-adapter-honda-rzcrew.jpg?v=1710320625","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: K-Tuned\u003cbr\u003eReference Number: KTD-K24-IM2\u003cbr\u003eIntake Type: Intake Manifold\u003cbr\u003e\u003cbr\u003eThe K24 Intake Manifold Adapter is a simple and easy way to install K20 style manifold on K24 heads. The recirculation fitting on K24s is typically part of the intake manifold which isn’t on K20 intake manifolds. We have designed the adapter to work with all K24 heads including the K24Z-Series (R40) heads. This can also be used to install K20 manifolds or cut RBC manifolds on 9th gen Civic si as the water bypass is slightly different and you will not need an intake manifold adapter when using the adapter. The adapter lowers intake air temps as coolant is no longer connected the intake manifold. Hondata has shown that intake air density will drop 1% for every 5°F increase in intake temperature. This is wasted power that can easily be gained back by using the adapter. The adapter also features a 1\/8 NPT port for a coolant temp sensor commonly used in swap cars.\n\n\nThe Intake Manifold Adapter can be installed either using our spring loaded tab or by tapping the head. We use Honda Bond or similar gasket maker as it provides a strong seal and when using the spring loaded tab when the adapter isn’t under pressure there will be no chance of leak. The spring loaded tab holds the adapter down with constant spring pressure to ensure a tight fit and seal. The other option is using the provided blind hole you can easily tap the head for the second hole. Tapping the head will require a 6.5mm drill bit (to finish the blind hole in the adapter), 5mm drill bit (to drill the head), and M6x1.0 Tap. \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAccord | CL9 | 2002-2008 | NA | K24A3 | I4\u003c!--split--\u003e"}

{"id":7525634048182,"title":"Magnus - Bosch 82mm Throttle Body Universal Fits Magnus Evo X Intake Manifold","handle":"magnus-bosch-82mm-throttle-body-universal-fits-magnus-evo-x-intake-manifold","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Bosch\u003cbr\u003eReference Number: MMCINT1050\u003cbr\u003eThrottle Body Diameter: 82mm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe Bosch 82mm throttle body is the go to option for a drive by wire setup looking to make big power. At 82mm, this throttle body will give you all the air you need to feed your high performance engine. Cut out engine bay clutter, and just run a few wires to your ECU and have complete control of your throttle. Being a drive by wire unit, this Bosch throttle body will give you complete control over your throttle by giving you the ability to tune your throttle maps when used with the correct ECU. A new unterminated Connector is now included with the each purchase\u003cbr\u003e\u003cbr\u003e\n\nTo be used in conjunction with the Magnus 90mm to Bosch 82mm throttle body adapter (MMCINT1082) when used with Magnus V3, V4, or V5 intake manifolds.\u003cbr\u003e\n\nMagnus 82mm Bosch Throttle Body Hi Boost Inlet Adaptor\u003cbr\u003e\u003cbr\u003e\n\nFeatures:\u003cbr\u003e\n\nDrive by wire\u003cbr\u003e\nLarge 82mm bore for maximum flow\u003cbr\u003e\nAdjustable through ECU\u003cbr\u003e\nConnector included!\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e","published_at":"2022-12-12T15:41:22+08:00","created_at":"2022-12-12T15:37:28+08:00","vendor":"Bosch","type":"Throttle Bodies","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","bosch","intake","lancer-evolution-x-cz4a-chuki-gsr-jdmmr-2008-2009-tc-4b11-i4","lancer-evolution-x-cz4a-chuki-rs-jdmgsr-2008-2009-tc-4b11-i4","lancer-evolution-x-cz4a-kouki-gsr-jdmmr-2009-2017-tc-4b11-i4","lancer-evolution-x-cz4a-kouki-rs-jdmgsr-2009-2017-tc-4b11-i4","lancer-evolution-x-cz4a-zenki-gsr-jdmmr-2007-2008-tc-4b11-i4","lancer-evolution-x-cz4a-zenki-rs-jdmgsr-2007-2008-tc-4b11-i4","mitsubishi","throttle-bodies","US1","ws17"],"price":62600,"price_min":62600,"price_max":62600,"available":true,"price_varies":false,"compare_at_price":62600,"compare_at_price_min":62600,"compare_at_price_max":62600,"compare_at_price_varies":false,"variants":[{"id":42004756529334,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMCINT1050","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Magnus - Bosch 82mm Throttle Body Universal Fits Magnus Evo X Intake Manifold","public_title":null,"options":["Default Title"],"price":62600,"weight":1200,"compare_at_price":62600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/82mm-bosch-tb-1_bad082fb-4867-41ff-be63-55a8ecb0108f.jpg?v=1729661458"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/82mm-bosch-tb-1_bad082fb-4867-41ff-be63-55a8ecb0108f.jpg?v=1729661458","options":["Title"],"media":[{"alt":"Magnus - Bosch 82mm Throttle Body Universal Fits Magnus Evo X Intake Manifold","id":28685740998838,"position":1,"preview_image":{"aspect_ratio":1.506,"height":664,"width":1000,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/82mm-bosch-tb-1_bad082fb-4867-41ff-be63-55a8ecb0108f.jpg?v=1729661458"},"aspect_ratio":1.506,"height":664,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/82mm-bosch-tb-1_bad082fb-4867-41ff-be63-55a8ecb0108f.jpg?v=1729661458","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Bosch\u003cbr\u003eReference Number: MMCINT1050\u003cbr\u003eThrottle Body Diameter: 82mm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe Bosch 82mm throttle body is the go to option for a drive by wire setup looking to make big power. At 82mm, this throttle body will give you all the air you need to feed your high performance engine. Cut out engine bay clutter, and just run a few wires to your ECU and have complete control of your throttle. Being a drive by wire unit, this Bosch throttle body will give you complete control over your throttle by giving you the ability to tune your throttle maps when used with the correct ECU. A new unterminated Connector is now included with the each purchase\u003cbr\u003e\u003cbr\u003e\n\nTo be used in conjunction with the Magnus 90mm to Bosch 82mm throttle body adapter (MMCINT1082) when used with Magnus V3, V4, or V5 intake manifolds.\u003cbr\u003e\n\nMagnus 82mm Bosch Throttle Body Hi Boost Inlet Adaptor\u003cbr\u003e\u003cbr\u003e\n\nFeatures:\u003cbr\u003e\n\nDrive by wire\u003cbr\u003e\nLarge 82mm bore for maximum flow\u003cbr\u003e\nAdjustable through ECU\u003cbr\u003e\nConnector included!\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e"}

{"id":8096646365366,"title":"Magnus - Sheetmetal Intake Manifold 8 Injector with Bosch 82mm DBW Throttle Body Flange for Mitsubishi Evo X","handle":"magnus-mmcint1070-008","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Magnus\u003cbr\u003eReference Number: MMCINT1070-008\u003cbr\u003eThrottle Body Diameter: 82mm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe same manifold all the worlds fastest EVO X’s use. Used on the 7 second English Racing EVO X. Our experience with intake manifolds dates back to the 90’s. We have dedicated countless hours researching and developing intake manifolds and providing people all around the world with our intakes for the past 17 years. Our experience has given us the knowledge to become one of the leading brands in the industry. With power gains and flow like no other we have set records and set the standard.\u003cbr\u003e\u003cbr\u003e\n\nWe Made it Happen Again\u003cbr\u003e\n\nAfter endless hours dedicated to creating prototypes, testing and perfecting we had reached the results that we were looking for. Our prior intake manifolds have set numerous records world wide with the 4G63 and the 4B11 has not fallen far from the tree. Our intake manifold is currently featured on the worlds fastest Evo X. English Racing has made a 70whp gain on their Evo X with our intake manifold! They’ve run over 80 PSI of boost pressure! 3 versions are available, 4 injector for 68mm or 82mm throttle body and the latest 8 injectors on one plane for 82mm throttle body.\u003cbr\u003e\n\nA Magnus fuel rail is included with every purchase of a manifold\u003cbr\u003e\n\nFactory power steering must be relocated or deleted in order for this manifold to fit.\u003cbr\u003e\n\nManifold comes standard with Bosch 82mm DBW throttle body flange.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eLancer Evolution X | CZ4A Zenki (GSR Jdm\/MR) | 2007-2008 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Chuki (GSR Jdm\/MR) | 2008-2009 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Kouki (GSR Jdm\/MR) | 2009-2017 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Zenki (RS Jdm\/GSR) | 2007-2008 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Chuki (RS Jdm\/GSR) | 2008-2009 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Kouki (RS Jdm\/GSR) | 2009-2017 | TC | 4B11 | I4\u003c!--split--\u003e","published_at":"2024-10-23T13:32:08+08:00","created_at":"2024-10-23T13:30:55+08:00","vendor":"Magnus","type":"Intake Manifolds","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","intake","intake-manifolds","lancer-evolution-x-cz4a-chuki-gsr-jdmmr-2008-2009-tc-4b11-i4","lancer-evolution-x-cz4a-chuki-rs-jdmgsr-2008-2009-tc-4b11-i4","lancer-evolution-x-cz4a-kouki-gsr-jdmmr-2009-2017-tc-4b11-i4","lancer-evolution-x-cz4a-kouki-rs-jdmgsr-2009-2017-tc-4b11-i4","lancer-evolution-x-cz4a-zenki-gsr-jdmmr-2007-2008-tc-4b11-i4","lancer-evolution-x-cz4a-zenki-rs-jdmgsr-2007-2008-tc-4b11-i4","magnus","manifolds","mitsubishi","throttle-bodies","US1","ws18"],"price":273900,"price_min":273900,"price_max":273900,"available":true,"price_varies":false,"compare_at_price":273900,"compare_at_price_min":273900,"compare_at_price_max":273900,"compare_at_price_varies":false,"variants":[{"id":43557431509174,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMCINT1070-008","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Magnus - Sheetmetal Intake Manifold 8 Injector with Bosch 82mm DBW Throttle Body Flange for Mitsubishi Evo X","public_title":null,"options":["Default Title"],"price":273900,"weight":12000,"compare_at_price":273900,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/MMCINT1070-008_3e37db7a-c8e3-4e26-a973-57eb3d874e45.jpg?v=1729661455"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/MMCINT1070-008_3e37db7a-c8e3-4e26-a973-57eb3d874e45.jpg?v=1729661455","options":["Title"],"media":[{"alt":"magnus MMCINT1070-008","id":28685740966070,"position":1,"preview_image":{"aspect_ratio":1.561,"height":492,"width":768,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/MMCINT1070-008_3e37db7a-c8e3-4e26-a973-57eb3d874e45.jpg?v=1729661455"},"aspect_ratio":1.561,"height":492,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/MMCINT1070-008_3e37db7a-c8e3-4e26-a973-57eb3d874e45.jpg?v=1729661455","width":768}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Magnus\u003cbr\u003eReference Number: MMCINT1070-008\u003cbr\u003eThrottle Body Diameter: 82mm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe same manifold all the worlds fastest EVO X’s use. Used on the 7 second English Racing EVO X. Our experience with intake manifolds dates back to the 90’s. We have dedicated countless hours researching and developing intake manifolds and providing people all around the world with our intakes for the past 17 years. Our experience has given us the knowledge to become one of the leading brands in the industry. With power gains and flow like no other we have set records and set the standard.\u003cbr\u003e\u003cbr\u003e\n\nWe Made it Happen Again\u003cbr\u003e\n\nAfter endless hours dedicated to creating prototypes, testing and perfecting we had reached the results that we were looking for. Our prior intake manifolds have set numerous records world wide with the 4G63 and the 4B11 has not fallen far from the tree. Our intake manifold is currently featured on the worlds fastest Evo X. English Racing has made a 70whp gain on their Evo X with our intake manifold! They’ve run over 80 PSI of boost pressure! 3 versions are available, 4 injector for 68mm or 82mm throttle body and the latest 8 injectors on one plane for 82mm throttle body.\u003cbr\u003e\n\nA Magnus fuel rail is included with every purchase of a manifold\u003cbr\u003e\n\nFactory power steering must be relocated or deleted in order for this manifold to fit.\u003cbr\u003e\n\nManifold comes standard with Bosch 82mm DBW throttle body flange.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eLancer Evolution X | CZ4A Zenki (GSR Jdm\/MR) | 2007-2008 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Chuki (GSR Jdm\/MR) | 2008-2009 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Kouki (GSR Jdm\/MR) | 2009-2017 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Zenki (RS Jdm\/GSR) | 2007-2008 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Chuki (RS Jdm\/GSR) | 2008-2009 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Kouki (RS Jdm\/GSR) | 2009-2017 | TC | 4B11 | I4\u003c!--split--\u003e"}

{"id":7638771957942,"title":"Mazda OEM - Airbox cowl - Mazda - MX-5 Miata Roadster NCEC","handle":"mazda-oem-airbox-cowl-mazda-mx-5-miata-roadster-ncec-ne57-56-35xa","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mazda OEM\u003cbr\u003eReference Number: NE57-56-35XA\u003cbr\u003eIntake Type: Airbox\u003cbr\u003eIncludes 99940-0801 bolts (x2)\u003cbr\u003e\u003cbr\u003eSome NC has a different Cowl. Change it to Allow the installation of Cusco strut brace 428 540 AT\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMX-5 Miata Roadster | NCEC | 2005-2008 | NA | LF-VE | I4\u003c!--split--\u003e","published_at":"2023-07-27T14:28:41+08:00","created_at":"2023-07-27T14:27:13+08:00","vendor":"Mazda OEM","type":"Intake Kits","tags":["2005","2006","2007","2008","airbox","genuine-mazda-parts","intake","intake-kits","JP1","mazda","mazda-oem","mx-5-miata-roadster-ncec-2005-2008-na-lf-ve-i4","ws119"],"price":9700,"price_min":9700,"price_max":9700,"available":true,"price_varies":false,"compare_at_price":9700,"compare_at_price_min":9700,"compare_at_price_max":9700,"compare_at_price_varies":false,"variants":[{"id":42324159332534,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"NE57-56-35XA","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mazda OEM - Airbox cowl - Mazda - MX-5 Miata Roadster NCEC","public_title":null,"options":["Default Title"],"price":9700,"weight":8000,"compare_at_price":9700,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/mazda-oem-airbox-cowl-mazda-mx-5-miata-roadster-ncec-rzcrew.jpg?v=1710316156"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/mazda-oem-airbox-cowl-mazda-mx-5-miata-roadster-ncec-rzcrew.jpg?v=1710316156","options":["Title"],"media":[{"alt":"Mazda OEM - Airbox cowl - Mazda - MX-5 Miata Roadster NCEC - NE57-56-35XA","id":26451987005622,"position":1,"preview_image":{"aspect_ratio":1.0,"height":350,"width":350,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/mazda-oem-airbox-cowl-mazda-mx-5-miata-roadster-ncec-rzcrew.jpg?v=1710316156"},"aspect_ratio":1.0,"height":350,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/mazda-oem-airbox-cowl-mazda-mx-5-miata-roadster-ncec-rzcrew.jpg?v=1710316156","width":350}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mazda OEM\u003cbr\u003eReference Number: NE57-56-35XA\u003cbr\u003eIntake Type: Airbox\u003cbr\u003eIncludes 99940-0801 bolts (x2)\u003cbr\u003e\u003cbr\u003eSome NC has a different Cowl. Change it to Allow the installation of Cusco strut brace 428 540 AT\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMX-5 Miata Roadster | NCEC | 2005-2008 | NA | LF-VE | I4\u003c!--split--\u003e"}

{"id":562001084443,"title":"Mishimoto - BMW E90\/E92 w\/ N52 Engine Silicone Intake Boot - Blue - E82 E88 E90 E91 E92 E93 - MMHOSE-E90-06IHBL","handle":"mishimoto-bmw-e90-e92-w-n52-engine-silicone-intake-boot-blue-e82-e88-e90-e91-e92-e93-mmhose-e90-06ihbl","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-E90-06IHBL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for BMW E90\/E92 and E82\/E88 vehicles with the N52 engine\u003cbr\u003eRemoves the resonator found in the stock intake boot, provides a slight increase in engine tone\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eInstalls in under 1 hour\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eFits with single stage or 3-stage intake manifolds\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eAvailable in blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Intake Hose\u003cbr\u003e(2) Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eLength 7.8\"\u003cbr\u003eThis product will only fit BMW E90 \/ E92 \/ E91 \/ E92 \/ E93 \/ E82 \/ E88 vehicles with the N52 engine\u003cbr\u003eMax Temp 330°F\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto N52 silicone intake boot is constructed of five layers of silicone with steel reinforcement rings for maximum durability. The steel reinforcement rings keep this hose from collapsing when under load, keeping your engine supplied with adequate airflow. The stock N52 intake boot has a resonator that BMW included to keep the N52 quiet. We tossed that resonator to the curb for a nice increase in engine and intake tone. This N52 intake boot fits with the stock airbox and single stage or 3-stage intake manifolds. The silicone construction will provide you with a long service life, and the Mishimoto Lifetime Warranty will make sure your intake boot is always leak free!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for BMW E90\/E92 and E82\/E88 vehicles with the N52 engine\u003cbr\u003eRemoves the resonator found in the stock intake boot, provides a slight increase in engine tone\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eInstalls in under 1 hour\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eFits with single stage or 3-stage intake manifolds\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eAvailable in blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Intake Hose\u003cbr\u003e(2) Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eLength 7.8\"\u003cbr\u003eThis product will only fit BMW E90 \/ E92 \/ E91 \/ E92 \/ E93 \/ E82 \/ E88 vehicles with the N52 engine\u003cbr\u003eMax Temp 330°F\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto N52 silicone intake boot is constructed of five layers of silicone with steel reinforcement rings for maximum durability. The steel reinforcement rings keep this hose from collapsing when under load, keeping your engine supplied with adequate airflow. The stock N52 intake boot has a resonator that BMW included to keep the N52 quiet. We tossed that resonator to the curb for a nice increase in engine and intake tone. This N52 intake boot fits with the stock airbox and single stage or 3-stage intake manifolds. The silicone construction will provide you with a long service life, and the Mishimoto Lifetime Warranty will make sure your intake boot is always leak free!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:26:46+08:00","created_at":"2018-01-24T23:26:46+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["1-series-125i-e82-2008-2011-na-n52b30-i6","1-series-125i-e88-2008-2011-na-n52b30-i6","2004","2005","2006","2007","2008","2009","2010","2011","3-series-cabriolet-e93-2004-2011-na-i6","3-series-coupe-e92-2004-2011-na-i6","3-series-e90-2004-2011-na-i6","3-series-estate-e91-2005-2011-na-i6","bmw","intake","intake-hoses","mishimoto","US1","ws111"],"price":12430,"price_min":12430,"price_max":12430,"available":true,"price_varies":false,"compare_at_price":12500,"compare_at_price_min":12500,"compare_at_price_max":12500,"compare_at_price_varies":false,"variants":[{"id":5990400622619,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-E90-06IHBL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - BMW E90\/E92 w\/ N52 Engine Silicone Intake Boot - Blue - E82 E88 E90 E91 E92 E93 - MMHOSE-E90-06IHBL","public_title":null,"options":["Default Title"],"price":12430,"weight":4544,"compare_at_price":12500,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-E90-06IHBL.jpg?v=1710154181"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-E90-06IHBL.jpg?v=1710154181","options":["Title"],"media":[{"alt":"Mishimoto - BMW E90\/E92 w\/ N52 Engine Silicone Intake Boot - Blue - E82 E88 E90 E91 E92 E93 - MMHOSE-E90-06IHBL - Rzcrewgarage","id":1351405633633,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-E90-06IHBL.jpg?v=1710154181"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-E90-06IHBL.jpg?v=1710154181","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-E90-06IHBL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for BMW E90\/E92 and E82\/E88 vehicles with the N52 engine\u003cbr\u003eRemoves the resonator found in the stock intake boot, provides a slight increase in engine tone\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eInstalls in under 1 hour\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eFits with single stage or 3-stage intake manifolds\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eAvailable in blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Intake Hose\u003cbr\u003e(2) Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eLength 7.8\"\u003cbr\u003eThis product will only fit BMW E90 \/ E92 \/ E91 \/ E92 \/ E93 \/ E82 \/ E88 vehicles with the N52 engine\u003cbr\u003eMax Temp 330°F\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto N52 silicone intake boot is constructed of five layers of silicone with steel reinforcement rings for maximum durability. The steel reinforcement rings keep this hose from collapsing when under load, keeping your engine supplied with adequate airflow. The stock N52 intake boot has a resonator that BMW included to keep the N52 quiet. We tossed that resonator to the curb for a nice increase in engine and intake tone. This N52 intake boot fits with the stock airbox and single stage or 3-stage intake manifolds. The silicone construction will provide you with a long service life, and the Mishimoto Lifetime Warranty will make sure your intake boot is always leak free!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for BMW E90\/E92 and E82\/E88 vehicles with the N52 engine\u003cbr\u003eRemoves the resonator found in the stock intake boot, provides a slight increase in engine tone\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eInstalls in under 1 hour\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eFits with single stage or 3-stage intake manifolds\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eAvailable in blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Intake Hose\u003cbr\u003e(2) Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eLength 7.8\"\u003cbr\u003eThis product will only fit BMW E90 \/ E92 \/ E91 \/ E92 \/ E93 \/ E82 \/ E88 vehicles with the N52 engine\u003cbr\u003eMax Temp 330°F\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto N52 silicone intake boot is constructed of five layers of silicone with steel reinforcement rings for maximum durability. The steel reinforcement rings keep this hose from collapsing when under load, keeping your engine supplied with adequate airflow. The stock N52 intake boot has a resonator that BMW included to keep the N52 quiet. We tossed that resonator to the curb for a nice increase in engine and intake tone. This N52 intake boot fits with the stock airbox and single stage or 3-stage intake manifolds. The silicone construction will provide you with a long service life, and the Mishimoto Lifetime Warranty will make sure your intake boot is always leak free!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":562001117211,"title":"Mishimoto - BMW E90\/E92 w\/ N52 Engine Silicone Intake Boot - Red - E82 E88 E90 E91 E92 E93 - MMHOSE-E90-06IHRD","handle":"mishimoto-bmw-e90-e92-w-n52-engine-silicone-intake-boot-red-e82-e88-e90-e91-e92-e93-mmhose-e90-06ihrd","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-E90-06IHRD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for BMW E90\/E92 and E82\/E88 vehicles with the N52 engine\u003cbr\u003eRemoves the resonator found in the stock intake boot, provides a slight increase in engine tone\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eInstalls in under 1 hour\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eFits with single stage or 3-stage intake manifolds\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eAvailable in blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Intake Hose\u003cbr\u003e(2) Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eLength 7.8\"\u003cbr\u003eThis product will only fit BMW E90 \/ E92 \/ E91 \/ E92 \/ E93 \/ E82 \/ E88 vehicles with the N52 engine\u003cbr\u003eMax Temp 330°F\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto N52 silicone intake boot is constructed of five layers of silicone with steel reinforcement rings for maximum durability. The steel reinforcement rings keep this hose from collapsing when under load, keeping your engine supplied with adequate airflow. The stock N52 intake boot has a resonator that BMW included to keep the N52 quiet. We tossed that resonator to the curb for a nice increase in engine and intake tone. This N52 intake boot fits with the stock airbox and single stage or 3-stage intake manifolds. The silicone construction will provide you with a long service life, and the Mishimoto Lifetime Warranty will make sure your intake boot is always leak free!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for BMW E90\/E92 and E82\/E88 vehicles with the N52 engine\u003cbr\u003eRemoves the resonator found in the stock intake boot, provides a slight increase in engine tone\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eInstalls in under 1 hour\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eFits with single stage or 3-stage intake manifolds\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eAvailable in blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Intake Hose\u003cbr\u003e(2) Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eLength 7.8\"\u003cbr\u003eThis product will only fit BMW E90 \/ E92 \/ E91 \/ E92 \/ E93 \/ E82 \/ E88 vehicles with the N52 engine\u003cbr\u003eMax Temp 330°F\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto N52 silicone intake boot is constructed of five layers of silicone with steel reinforcement rings for maximum durability. The steel reinforcement rings keep this hose from collapsing when under load, keeping your engine supplied with adequate airflow. The stock N52 intake boot has a resonator that BMW included to keep the N52 quiet. We tossed that resonator to the curb for a nice increase in engine and intake tone. This N52 intake boot fits with the stock airbox and single stage or 3-stage intake manifolds. The silicone construction will provide you with a long service life, and the Mishimoto Lifetime Warranty will make sure your intake boot is always leak free!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2025-04-14T11:29:41+08:00","created_at":"2018-01-24T23:26:47+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["1-series-125i-e82-2008-2011-na-n52b30-i6","1-series-125i-e88-2008-2011-na-n52b30-i6","2004","2005","2006","2007","2008","2009","2010","2011","3-series-cabriolet-e93-2004-2011-na-i6","3-series-coupe-e92-2004-2011-na-i6","3-series-e90-2004-2011-na-i6","3-series-estate-e91-2005-2011-na-i6","bmw","intake","intake-hoses","mishimoto","US1","ws111"],"price":12430,"price_min":12430,"price_max":12430,"available":true,"price_varies":false,"compare_at_price":12500,"compare_at_price_min":12500,"compare_at_price_max":12500,"compare_at_price_varies":false,"variants":[{"id":5990400655387,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-E90-06IHRD","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - BMW E90\/E92 w\/ N52 Engine Silicone Intake Boot - Red - E82 E88 E90 E91 E92 E93 - MMHOSE-E90-06IHRD","public_title":null,"options":["Default Title"],"price":12430,"weight":4454,"compare_at_price":12500,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-E90-06IHRD.jpg?v=1710154181"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-E90-06IHRD.jpg?v=1710154181","options":["Title"],"media":[{"alt":"Mishimoto - BMW E90\/E92 w\/ N52 Engine Silicone Intake Boot - Red - E82 E88 E90 E91 E92 E93 - MMHOSE-E90-06IHRD - Rzcrewgarage","id":1351405666401,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-E90-06IHRD.jpg?v=1710154181"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-E90-06IHRD.jpg?v=1710154181","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-E90-06IHRD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for BMW E90\/E92 and E82\/E88 vehicles with the N52 engine\u003cbr\u003eRemoves the resonator found in the stock intake boot, provides a slight increase in engine tone\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eInstalls in under 1 hour\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eFits with single stage or 3-stage intake manifolds\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eAvailable in blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Intake Hose\u003cbr\u003e(2) Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eLength 7.8\"\u003cbr\u003eThis product will only fit BMW E90 \/ E92 \/ E91 \/ E92 \/ E93 \/ E82 \/ E88 vehicles with the N52 engine\u003cbr\u003eMax Temp 330°F\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto N52 silicone intake boot is constructed of five layers of silicone with steel reinforcement rings for maximum durability. The steel reinforcement rings keep this hose from collapsing when under load, keeping your engine supplied with adequate airflow. The stock N52 intake boot has a resonator that BMW included to keep the N52 quiet. We tossed that resonator to the curb for a nice increase in engine and intake tone. This N52 intake boot fits with the stock airbox and single stage or 3-stage intake manifolds. The silicone construction will provide you with a long service life, and the Mishimoto Lifetime Warranty will make sure your intake boot is always leak free!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for BMW E90\/E92 and E82\/E88 vehicles with the N52 engine\u003cbr\u003eRemoves the resonator found in the stock intake boot, provides a slight increase in engine tone\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eInstalls in under 1 hour\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eFits with single stage or 3-stage intake manifolds\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eAvailable in blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Intake Hose\u003cbr\u003e(2) Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eLength 7.8\"\u003cbr\u003eThis product will only fit BMW E90 \/ E92 \/ E91 \/ E92 \/ E93 \/ E82 \/ E88 vehicles with the N52 engine\u003cbr\u003eMax Temp 330°F\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto N52 silicone intake boot is constructed of five layers of silicone with steel reinforcement rings for maximum durability. The steel reinforcement rings keep this hose from collapsing when under load, keeping your engine supplied with adequate airflow. The stock N52 intake boot has a resonator that BMW included to keep the N52 quiet. We tossed that resonator to the curb for a nice increase in engine and intake tone. This N52 intake boot fits with the stock airbox and single stage or 3-stage intake manifolds. The silicone construction will provide you with a long service life, and the Mishimoto Lifetime Warranty will make sure your intake boot is always leak free!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":562003148827,"title":"Mishimoto - Honda Civic Si Silicone Induction Hose - Black - FD2 FG2 - MMHOSE-CIV-06SIIHBK","handle":"mishimoto-honda-civic-si-silicone-induction-hose-black-fd2-fg2-mmhose-civ-06siihbk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-CIV-06SIIHBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2025-04-14T11:29:46+08:00","created_at":"2018-01-24T23:27:08+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["2007","2008","2009","2010","civic-fd2-2007-2010-na-k20z2-i4","civic-fg2-2007-2009-na-k20z3-i4","honda","intake","intake-hoses","mishimoto","US1","ws111"],"price":22460,"price_min":22460,"price_max":22460,"available":true,"price_varies":false,"compare_at_price":22500,"compare_at_price_min":22500,"compare_at_price_max":22500,"compare_at_price_varies":false,"variants":[{"id":5990402883611,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-CIV-06SIIHBK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Honda Civic Si Silicone Induction Hose - Black - FD2 FG2 - MMHOSE-CIV-06SIIHBK","public_title":null,"options":["Default Title"],"price":22460,"weight":5814,"compare_at_price":22500,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHBK.jpg?v=1710154197"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHBK.jpg?v=1710154197","options":["Title"],"media":[{"alt":"Mishimoto - Honda Civic Si Silicone Induction Hose - Black - FD2 FG2 - MMHOSE-CIV-06SIIHBK - Rzcrewgarage","id":1351406780513,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHBK.jpg?v=1710154197"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHBK.jpg?v=1710154197","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-CIV-06SIIHBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":562004099099,"title":"Mishimoto - Honda Civic Si Silicone Induction Hose - Blue - FD2 FG2 - MMHOSE-CIV-06SIIHBL","handle":"mishimoto-honda-civic-si-silicone-induction-hose-blue-fd2-fg2-mmhose-civ-06siihbl","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-CIV-06SIIHBL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2025-04-14T11:29:47+08:00","created_at":"2018-01-24T23:27:09+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["2007","2008","2009","2010","civic-fd2-2007-2010-na-k20z2-i4","civic-fg2-2007-2009-na-k20z3-i4","honda","intake","intake-hoses","mishimoto","US1","ws111"],"price":22460,"price_min":22460,"price_max":22460,"available":false,"price_varies":false,"compare_at_price":22500,"compare_at_price_min":22500,"compare_at_price_max":22500,"compare_at_price_varies":false,"variants":[{"id":5990403801115,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-CIV-06SIIHBL","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Mishimoto - Honda Civic Si Silicone Induction Hose - Blue - FD2 FG2 - MMHOSE-CIV-06SIIHBL","public_title":null,"options":["Default Title"],"price":22460,"weight":10000,"compare_at_price":22500,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHBL.jpg?v=1710154199"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHBL.jpg?v=1710154199","options":["Title"],"media":[{"alt":"Mishimoto - Honda Civic Si Silicone Induction Hose - Blue - FD2 FG2 - MMHOSE-CIV-06SIIHBL - Rzcrewgarage","id":1351406813281,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHBL.jpg?v=1710154199"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHBL.jpg?v=1710154199","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-CIV-06SIIHBL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":562004131867,"title":"Mishimoto - Honda Civic Si Silicone Induction Hose - Red - FD2 FG2 - MMHOSE-CIV-06SIIHRD","handle":"mishimoto-honda-civic-si-silicone-induction-hose-red-fd2-fg2-mmhose-civ-06siihrd","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-CIV-06SIIHRD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2025-04-14T11:29:51+08:00","created_at":"2018-01-24T23:27:09+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["2007","2008","2009","2010","civic-fd2-2007-2010-na-k20z2-i4","civic-fg2-2007-2009-na-k20z3-i4","honda","intake","intake-hoses","mishimoto","US1","ws111"],"price":22460,"price_min":22460,"price_max":22460,"available":false,"price_varies":false,"compare_at_price":22500,"compare_at_price_min":22500,"compare_at_price_max":22500,"compare_at_price_varies":false,"variants":[{"id":5990403866651,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-CIV-06SIIHRD","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Mishimoto - Honda Civic Si Silicone Induction Hose - Red - FD2 FG2 - MMHOSE-CIV-06SIIHRD","public_title":null,"options":["Default Title"],"price":22460,"weight":10000,"compare_at_price":22500,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHRD.jpg?v=1710154199"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHRD.jpg?v=1710154199","options":["Title"],"media":[{"alt":"Mishimoto - Honda Civic Si Silicone Induction Hose - Red - FD2 FG2 - MMHOSE-CIV-06SIIHRD - Rzcrewgarage","id":1351406878817,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHRD.jpg?v=1710154199"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHRD.jpg?v=1710154199","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-CIV-06SIIHRD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":562208604187,"title":"Mishimoto - Nissan 350Z Air Intake Hose Kit - Black - Z33 - MMHOSE-350Z-03IHBK","handle":"mishimoto-nissan-350z-air-intake-hose-kit-black-z33-mmhose-350z-03ihbk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-350Z-03IHBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2003–2006 Nissan 350Z\u003cbr\u003eUp to 4 whp \/ 6 wtq gains over the stock rubber induction hose\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eFits with the stock air intake system or Mishimoto Performance Air Intake\u003cbr\u003eInstalls with no tuning necessary\u003cbr\u003e5-Ply Silicone construction for added durability and long service life\u003cbr\u003eSilicone hose reinforced with steel rings to prevent collapse\u003cbr\u003ePre-installed CNC connector provides a quick and easy installation\u003cbr\u003eFits a wide range of Nissan \/ Infiniti vehicles with the VQ35DE engine\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Intake Hose\u003cbr\u003e(1) CNC Breather Port\u003cbr\u003e(2) 80-100mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote 22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M).\u003cbr\u003eOverall Length 15.3\"\u003cbr\u003e\u003cbr\u003eAlso Fits Wide range of Nissan\/Infiniti vehicles with VQ35DE engine\u003cbr\u003eEngine Codes VQ35DE\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 3.5\"\u003cbr\u003eInner Diameter 3.13\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eSmooth out your intake with the Mishimoto 350Z induction hose kit. 5-ply silicone construction makes it more durable than the stock rubber hose, and the steel reinforcement rings prevent collapse when under load. Installation of this 350Z intake hose can be accomplished in under 30 minutes and yields an increase of 4 whp and 6 wtq! This 350Z intake hose works with the stock intake system or the Mishimoto 350Z Intake. This 350Z induction hose is true bolt-on performance, as it does not require a tune. All Mishimoto 350Z parts come with the Mishimoto Lifetime Warranty to ensure that your Z is always performing, both on and off the track.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2003–2006 Nissan 350Z\u003cbr\u003eUp to 4 whp \/ 6 wtq gains over the stock rubber induction hose\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eFits with the stock air intake system or Mishimoto Performance Air Intake\u003cbr\u003eInstalls with no tuning necessary\u003cbr\u003e5-Ply Silicone construction for added durability and long service life\u003cbr\u003eSilicone hose reinforced with steel rings to prevent collapse\u003cbr\u003ePre-installed CNC connector provides a quick and easy installation\u003cbr\u003eFits a wide range of Nissan \/ Infiniti vehicles with the VQ35DE engine\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Intake Hose\u003cbr\u003e(1) CNC Breather Port\u003cbr\u003e(2) 80-100mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote 22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M).\u003cbr\u003eOverall Length 15.3\"\u003cbr\u003e\u003cbr\u003eAlso Fits Wide range of Nissan\/Infiniti vehicles with VQ35DE engine\u003cbr\u003eEngine Codes VQ35DE\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 3.5\"\u003cbr\u003eInner Diameter 3.13\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eSmooth out your intake with the Mishimoto 350Z induction hose kit. 5-ply silicone construction makes it more durable than the stock rubber hose, and the steel reinforcement rings prevent collapse when under load. Installation of this 350Z intake hose can be accomplished in under 30 minutes and yields an increase of 4 whp and 6 wtq! This 350Z intake hose works with the stock intake system or the Mishimoto 350Z Intake. This 350Z induction hose is true bolt-on performance, as it does not require a tune. All Mishimoto 350Z parts come with the Mishimoto Lifetime Warranty to ensure that your Z is always performing, both on and off the track.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-25T00:21:36+08:00","created_at":"2018-01-25T00:21:37+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["2002","2003","2004","2005","2006","2007","2008","fairlady-z-z33-chuki-2004-2005-na-vq35de-v6","fairlady-z-z33-kouki-2007-2008-na-vq35hr-v6","fairlady-z-z33-zenki-2002-2004-na-vq35de-v6","intake","intake-hoses","mishimoto","nissan","US1","ws111"],"price":18080,"price_min":18080,"price_max":18080,"available":true,"price_varies":false,"compare_at_price":18100,"compare_at_price_min":18100,"compare_at_price_max":18100,"compare_at_price_varies":false,"variants":[{"id":5990732005403,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-350Z-03IHBK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Nissan 350Z Air Intake Hose Kit - Black - Z33 - MMHOSE-350Z-03IHBK","public_title":null,"options":["Default Title"],"price":18080,"weight":5134,"compare_at_price":18100,"inventory_quantity":16,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-350Z-03IHBK_1ee2d0f5-3b5a-48ee-912d-cc87a9098c3e.jpg?v=1710154209"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-350Z-03IHBK_1ee2d0f5-3b5a-48ee-912d-cc87a9098c3e.jpg?v=1710154209","options":["Title"],"media":[{"alt":"Mishimoto - Nissan 350Z Air Intake Hose Kit - Black - Z33 - MMHOSE-350Z-03IHBK - Rzcrewgarage","id":1351406387297,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-350Z-03IHBK_1ee2d0f5-3b5a-48ee-912d-cc87a9098c3e.jpg?v=1710154209"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-350Z-03IHBK_1ee2d0f5-3b5a-48ee-912d-cc87a9098c3e.jpg?v=1710154209","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-350Z-03IHBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2003–2006 Nissan 350Z\u003cbr\u003eUp to 4 whp \/ 6 wtq gains over the stock rubber induction hose\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eFits with the stock air intake system or Mishimoto Performance Air Intake\u003cbr\u003eInstalls with no tuning necessary\u003cbr\u003e5-Ply Silicone construction for added durability and long service life\u003cbr\u003eSilicone hose reinforced with steel rings to prevent collapse\u003cbr\u003ePre-installed CNC connector provides a quick and easy installation\u003cbr\u003eFits a wide range of Nissan \/ Infiniti vehicles with the VQ35DE engine\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Intake Hose\u003cbr\u003e(1) CNC Breather Port\u003cbr\u003e(2) 80-100mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote 22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M).\u003cbr\u003eOverall Length 15.3\"\u003cbr\u003e\u003cbr\u003eAlso Fits Wide range of Nissan\/Infiniti vehicles with VQ35DE engine\u003cbr\u003eEngine Codes VQ35DE\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 3.5\"\u003cbr\u003eInner Diameter 3.13\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eSmooth out your intake with the Mishimoto 350Z induction hose kit. 5-ply silicone construction makes it more durable than the stock rubber hose, and the steel reinforcement rings prevent collapse when under load. Installation of this 350Z intake hose can be accomplished in under 30 minutes and yields an increase of 4 whp and 6 wtq! This 350Z intake hose works with the stock intake system or the Mishimoto 350Z Intake. This 350Z induction hose is true bolt-on performance, as it does not require a tune. All Mishimoto 350Z parts come with the Mishimoto Lifetime Warranty to ensure that your Z is always performing, both on and off the track.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2003–2006 Nissan 350Z\u003cbr\u003eUp to 4 whp \/ 6 wtq gains over the stock rubber induction hose\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eFits with the stock air intake system or Mishimoto Performance Air Intake\u003cbr\u003eInstalls with no tuning necessary\u003cbr\u003e5-Ply Silicone construction for added durability and long service life\u003cbr\u003eSilicone hose reinforced with steel rings to prevent collapse\u003cbr\u003ePre-installed CNC connector provides a quick and easy installation\u003cbr\u003eFits a wide range of Nissan \/ Infiniti vehicles with the VQ35DE engine\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Intake Hose\u003cbr\u003e(1) CNC Breather Port\u003cbr\u003e(2) 80-100mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote 22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M).\u003cbr\u003eOverall Length 15.3\"\u003cbr\u003e\u003cbr\u003eAlso Fits Wide range of Nissan\/Infiniti vehicles with VQ35DE engine\u003cbr\u003eEngine Codes VQ35DE\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 3.5\"\u003cbr\u003eInner Diameter 3.13\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eSmooth out your intake with the Mishimoto 350Z induction hose kit. 5-ply silicone construction makes it more durable than the stock rubber hose, and the steel reinforcement rings prevent collapse when under load. Installation of this 350Z intake hose can be accomplished in under 30 minutes and yields an increase of 4 whp and 6 wtq! This 350Z intake hose works with the stock intake system or the Mishimoto 350Z Intake. This 350Z induction hose is true bolt-on performance, as it does not require a tune. All Mishimoto 350Z parts come with the Mishimoto Lifetime Warranty to ensure that your Z is always performing, both on and off the track.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":562208636955,"title":"Mishimoto - Nissan 350Z Air Intake Hose Kit - Blue - Z33 - MMHOSE-350Z-03IHBL","handle":"mishimoto-nissan-350z-air-intake-hose-kit-blue-z33-mmhose-350z-03ihbl","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-350Z-03IHBL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2003–2006 Nissan 350Z\u003cbr\u003eUp to 4 whp \/ 6 wtq gains over the stock rubber induction hose\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eFits with the stock air intake system or Mishimoto Performance Air Intake\u003cbr\u003eInstalls with no tuning necessary\u003cbr\u003e5-Ply Silicone construction for added durability and long service life\u003cbr\u003eSilicone hose reinforced with steel rings to prevent collapse\u003cbr\u003ePre-installed CNC connector provides a quick and easy installation\u003cbr\u003eFits a wide range of Nissan \/ Infiniti vehicles with the VQ35DE engine\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Intake Hose\u003cbr\u003e(1) CNC Breather Port\u003cbr\u003e(2) 80-100mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote 22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M).\u003cbr\u003eOverall Length 15.3\"\u003cbr\u003e\u003cbr\u003eAlso Fits Wide range of Nissan\/Infiniti vehicles with VQ35DE engine\u003cbr\u003eEngine Codes VQ35DE\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 3.5\"\u003cbr\u003eInner Diameter 3.13\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eSmooth out your intake with the Mishimoto 350Z induction hose kit. 5-ply silicone construction makes it more durable than the stock rubber hose, and the steel reinforcement rings prevent collapse when under load. Installation of this 350Z intake hose can be accomplished in under 30 minutes and yields an increase of 4 whp and 6 wtq! This 350Z intake hose works with the stock intake system or the Mishimoto 350Z Intake. This 350Z induction hose is true bolt-on performance, as it does not require a tune. All Mishimoto 350Z parts come with the Mishimoto Lifetime Warranty to ensure that your Z is always performing, both on and off the track.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2003–2006 Nissan 350Z\u003cbr\u003eUp to 4 whp \/ 6 wtq gains over the stock rubber induction hose\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eFits with the stock air intake system or Mishimoto Performance Air Intake\u003cbr\u003eInstalls with no tuning necessary\u003cbr\u003e5-Ply Silicone construction for added durability and long service life\u003cbr\u003eSilicone hose reinforced with steel rings to prevent collapse\u003cbr\u003ePre-installed CNC connector provides a quick and easy installation\u003cbr\u003eFits a wide range of Nissan \/ Infiniti vehicles with the VQ35DE engine\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Intake Hose\u003cbr\u003e(1) CNC Breather Port\u003cbr\u003e(2) 80-100mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote 22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M).\u003cbr\u003eOverall Length 15.3\"\u003cbr\u003e\u003cbr\u003eAlso Fits Wide range of Nissan\/Infiniti vehicles with VQ35DE engine\u003cbr\u003eEngine Codes VQ35DE\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 3.5\"\u003cbr\u003eInner Diameter 3.13\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eSmooth out your intake with the Mishimoto 350Z induction hose kit. 5-ply silicone construction makes it more durable than the stock rubber hose, and the steel reinforcement rings prevent collapse when under load. Installation of this 350Z intake hose can be accomplished in under 30 minutes and yields an increase of 4 whp and 6 wtq! This 350Z intake hose works with the stock intake system or the Mishimoto 350Z Intake. This 350Z induction hose is true bolt-on performance, as it does not require a tune. All Mishimoto 350Z parts come with the Mishimoto Lifetime Warranty to ensure that your Z is always performing, both on and off the track.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 1 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2025-04-14T11:29:51+08:00","created_at":"2018-01-25T00:21:37+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["2002","2003","2004","2005","2006","2007","2008","fairlady-z-z33-chuki-2004-2005-na-vq35de-v6","fairlady-z-z33-kouki-2007-2008-na-vq35hr-v6","fairlady-z-z33-zenki-2002-2004-na-vq35de-v6","intake","intake-hoses","mishimoto","nissan","US1","ws111"],"price":18080,"price_min":18080,"price_max":18080,"available":true,"price_varies":false,"compare_at_price":18100,"compare_at_price_min":18100,"compare_at_price_max":18100,"compare_at_price_varies":false,"variants":[{"id":5990732038171,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-350Z-03IHBL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Nissan 350Z Air Intake Hose Kit - Blue - Z33 - MMHOSE-350Z-03IHBL","public_title":null,"options":["Default Title"],"price":18080,"weight":5043,"compare_at_price":18100,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-350Z-03IHBL_40167fa1-9efd-45f3-b0b4-5260c308841c.jpg?v=1710154209"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-350Z-03IHBL_40167fa1-9efd-45f3-b0b4-5260c308841c.jpg?v=1710154209","options":["Title"],"media":[{"alt":"Mishimoto - Nissan 350Z Air Intake Hose Kit - Blue - Z33 - MMHOSE-350Z-03IHBL - Rzcrewgarage","id":1351406452833,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-350Z-03IHBL_40167fa1-9efd-45f3-b0b4-5260c308841c.jpg?v=1710154209"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-350Z-03IHBL_40167fa1-9efd-45f3-b0b4-5260c308841c.jpg?v=1710154209","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-350Z-03IHBL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2003–2006 Nissan 350Z\u003cbr\u003eUp to 4 whp \/ 6 wtq gains over the stock rubber induction hose\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eFits with the stock air intake system or Mishimoto Performance Air Intake\u003cbr\u003eInstalls with no tuning necessary\u003cbr\u003e5-Ply Silicone construction for added durability and long service life\u003cbr\u003eSilicone hose reinforced with steel rings to prevent collapse\u003cbr\u003ePre-installed CNC connector provides a quick and easy installation\u003cbr\u003eFits a wide range of Nissan \/ Infiniti vehicles with the VQ35DE engine\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Intake Hose\u003cbr\u003e(1) CNC Breather Port\u003cbr\u003e(2) 80-100mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote 22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M).\u003cbr\u003eOverall Length 15.3\"\u003cbr\u003e\u003cbr\u003eAlso Fits Wide range of Nissan\/Infiniti vehicles with VQ35DE engine\u003cbr\u003eEngine Codes VQ35DE\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 3.5\"\u003cbr\u003eInner Diameter 3.13\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eSmooth out your intake with the Mishimoto 350Z induction hose kit. 5-ply silicone construction makes it more durable than the stock rubber hose, and the steel reinforcement rings prevent collapse when under load. Installation of this 350Z intake hose can be accomplished in under 30 minutes and yields an increase of 4 whp and 6 wtq! This 350Z intake hose works with the stock intake system or the Mishimoto 350Z Intake. This 350Z induction hose is true bolt-on performance, as it does not require a tune. All Mishimoto 350Z parts come with the Mishimoto Lifetime Warranty to ensure that your Z is always performing, both on and off the track.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2003–2006 Nissan 350Z\u003cbr\u003eUp to 4 whp \/ 6 wtq gains over the stock rubber induction hose\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eFits with the stock air intake system or Mishimoto Performance Air Intake\u003cbr\u003eInstalls with no tuning necessary\u003cbr\u003e5-Ply Silicone construction for added durability and long service life\u003cbr\u003eSilicone hose reinforced with steel rings to prevent collapse\u003cbr\u003ePre-installed CNC connector provides a quick and easy installation\u003cbr\u003eFits a wide range of Nissan \/ Infiniti vehicles with the VQ35DE engine\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Intake Hose\u003cbr\u003e(1) CNC Breather Port\u003cbr\u003e(2) 80-100mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote 22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M).\u003cbr\u003eOverall Length 15.3\"\u003cbr\u003e\u003cbr\u003eAlso Fits Wide range of Nissan\/Infiniti vehicles with VQ35DE engine\u003cbr\u003eEngine Codes VQ35DE\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 3.5\"\u003cbr\u003eInner Diameter 3.13\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eSmooth out your intake with the Mishimoto 350Z induction hose kit. 5-ply silicone construction makes it more durable than the stock rubber hose, and the steel reinforcement rings prevent collapse when under load. Installation of this 350Z intake hose can be accomplished in under 30 minutes and yields an increase of 4 whp and 6 wtq! This 350Z intake hose works with the stock intake system or the Mishimoto 350Z Intake. This 350Z induction hose is true bolt-on performance, as it does not require a tune. All Mishimoto 350Z parts come with the Mishimoto Lifetime Warranty to ensure that your Z is always performing, both on and off the track.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 1 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":562208669723,"title":"Mishimoto - Nissan 350Z Air Intake Hose Kit - Red - Z33 - MMHOSE-350Z-03IHRD","handle":"mishimoto-nissan-350z-air-intake-hose-kit-red-z33-mmhose-350z-03ihrd","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-350Z-03IHRD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2003–2006 Nissan 350Z\u003cbr\u003eUp to 4 whp \/ 6 wtq gains over the stock rubber induction hose\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eFits with the stock air intake system or Mishimoto Performance Air Intake\u003cbr\u003eInstalls with no tuning necessary\u003cbr\u003e5-Ply Silicone construction for added durability and long service life\u003cbr\u003eSilicone hose reinforced with steel rings to prevent collapse\u003cbr\u003ePre-installed CNC connector provides a quick and easy installation\u003cbr\u003eFits a wide range of Nissan \/ Infiniti vehicles with the VQ35DE engine\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Intake Hose\u003cbr\u003e(1) CNC Breather Port\u003cbr\u003e(2) 80-100mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote 22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M).\u003cbr\u003eOverall Length 15.3\"\u003cbr\u003e\u003cbr\u003eAlso Fits Wide range of Nissan\/Infiniti vehicles with VQ35DE engine\u003cbr\u003eEngine Codes VQ35DE\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 3.5\"\u003cbr\u003eInner Diameter 3.13\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eSmooth out your intake with the Mishimoto 350Z induction hose kit. 5-ply silicone construction makes it more durable than the stock rubber hose, and the steel reinforcement rings prevent collapse when under load. Installation of this 350Z intake hose can be accomplished in under 30 minutes and yields an increase of 4 whp and 6 wtq! This 350Z intake hose works with the stock intake system or the Mishimoto 350Z Intake. This 350Z induction hose is true bolt-on performance, as it does not require a tune. All Mishimoto 350Z parts come with the Mishimoto Lifetime Warranty to ensure that your Z is always performing, both on and off the track.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2003–2006 Nissan 350Z\u003cbr\u003eUp to 4 whp \/ 6 wtq gains over the stock rubber induction hose\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eFits with the stock air intake system or Mishimoto Performance Air Intake\u003cbr\u003eInstalls with no tuning necessary\u003cbr\u003e5-Ply Silicone construction for added durability and long service life\u003cbr\u003eSilicone hose reinforced with steel rings to prevent collapse\u003cbr\u003ePre-installed CNC connector provides a quick and easy installation\u003cbr\u003eFits a wide range of Nissan \/ Infiniti vehicles with the VQ35DE engine\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Intake Hose\u003cbr\u003e(1) CNC Breather Port\u003cbr\u003e(2) 80-100mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote 22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M).\u003cbr\u003eOverall Length 15.3\"\u003cbr\u003e\u003cbr\u003eAlso Fits Wide range of Nissan\/Infiniti vehicles with VQ35DE engine\u003cbr\u003eEngine Codes VQ35DE\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 3.5\"\u003cbr\u003eInner Diameter 3.13\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eSmooth out your intake with the Mishimoto 350Z induction hose kit. 5-ply silicone construction makes it more durable than the stock rubber hose, and the steel reinforcement rings prevent collapse when under load. Installation of this 350Z intake hose can be accomplished in under 30 minutes and yields an increase of 4 whp and 6 wtq! This 350Z intake hose works with the stock intake system or the Mishimoto 350Z Intake. This 350Z induction hose is true bolt-on performance, as it does not require a tune. All Mishimoto 350Z parts come with the Mishimoto Lifetime Warranty to ensure that your Z is always performing, both on and off the track.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 1 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-25T00:21:37+08:00","created_at":"2018-01-25T00:21:38+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["2002","2003","2004","2005","2006","2007","2008","fairlady-z-z33-chuki-2004-2005-na-vq35de-v6","fairlady-z-z33-kouki-2007-2008-na-vq35hr-v6","fairlady-z-z33-zenki-2002-2004-na-vq35de-v6","intake","intake-hoses","mishimoto","nissan","US1","ws111"],"price":18080,"price_min":18080,"price_max":18080,"available":false,"price_varies":false,"compare_at_price":18100,"compare_at_price_min":18100,"compare_at_price_max":18100,"compare_at_price_varies":false,"variants":[{"id":5990732070939,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-350Z-03IHRD","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Mishimoto - Nissan 350Z Air Intake Hose Kit - Red - Z33 - MMHOSE-350Z-03IHRD","public_title":null,"options":["Default Title"],"price":18080,"weight":10000,"compare_at_price":18100,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-350Z-03IHRD_f6dc0d25-9a5d-487c-b15f-d555a16d1527.jpg?v=1710154209"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-350Z-03IHRD_f6dc0d25-9a5d-487c-b15f-d555a16d1527.jpg?v=1710154209","options":["Title"],"media":[{"alt":"Mishimoto - Nissan 350Z Air Intake Hose Kit - Red - Z33 - MMHOSE-350Z-03IHRD - Rzcrewgarage","id":1351406551137,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-350Z-03IHRD_f6dc0d25-9a5d-487c-b15f-d555a16d1527.jpg?v=1710154209"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-350Z-03IHRD_f6dc0d25-9a5d-487c-b15f-d555a16d1527.jpg?v=1710154209","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-350Z-03IHRD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2003–2006 Nissan 350Z\u003cbr\u003eUp to 4 whp \/ 6 wtq gains over the stock rubber induction hose\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eFits with the stock air intake system or Mishimoto Performance Air Intake\u003cbr\u003eInstalls with no tuning necessary\u003cbr\u003e5-Ply Silicone construction for added durability and long service life\u003cbr\u003eSilicone hose reinforced with steel rings to prevent collapse\u003cbr\u003ePre-installed CNC connector provides a quick and easy installation\u003cbr\u003eFits a wide range of Nissan \/ Infiniti vehicles with the VQ35DE engine\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Intake Hose\u003cbr\u003e(1) CNC Breather Port\u003cbr\u003e(2) 80-100mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote 22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M).\u003cbr\u003eOverall Length 15.3\"\u003cbr\u003e\u003cbr\u003eAlso Fits Wide range of Nissan\/Infiniti vehicles with VQ35DE engine\u003cbr\u003eEngine Codes VQ35DE\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 3.5\"\u003cbr\u003eInner Diameter 3.13\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eSmooth out your intake with the Mishimoto 350Z induction hose kit. 5-ply silicone construction makes it more durable than the stock rubber hose, and the steel reinforcement rings prevent collapse when under load. Installation of this 350Z intake hose can be accomplished in under 30 minutes and yields an increase of 4 whp and 6 wtq! This 350Z intake hose works with the stock intake system or the Mishimoto 350Z Intake. This 350Z induction hose is true bolt-on performance, as it does not require a tune. All Mishimoto 350Z parts come with the Mishimoto Lifetime Warranty to ensure that your Z is always performing, both on and off the track.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2003–2006 Nissan 350Z\u003cbr\u003eUp to 4 whp \/ 6 wtq gains over the stock rubber induction hose\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eFits with the stock air intake system or Mishimoto Performance Air Intake\u003cbr\u003eInstalls with no tuning necessary\u003cbr\u003e5-Ply Silicone construction for added durability and long service life\u003cbr\u003eSilicone hose reinforced with steel rings to prevent collapse\u003cbr\u003ePre-installed CNC connector provides a quick and easy installation\u003cbr\u003eFits a wide range of Nissan \/ Infiniti vehicles with the VQ35DE engine\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Intake Hose\u003cbr\u003e(1) CNC Breather Port\u003cbr\u003e(2) 80-100mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote 22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M).\u003cbr\u003eOverall Length 15.3\"\u003cbr\u003e\u003cbr\u003eAlso Fits Wide range of Nissan\/Infiniti vehicles with VQ35DE engine\u003cbr\u003eEngine Codes VQ35DE\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 3.5\"\u003cbr\u003eInner Diameter 3.13\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eSmooth out your intake with the Mishimoto 350Z induction hose kit. 5-ply silicone construction makes it more durable than the stock rubber hose, and the steel reinforcement rings prevent collapse when under load. Installation of this 350Z intake hose can be accomplished in under 30 minutes and yields an increase of 4 whp and 6 wtq! This 350Z intake hose works with the stock intake system or the Mishimoto 350Z Intake. This 350Z induction hose is true bolt-on performance, as it does not require a tune. All Mishimoto 350Z parts come with the Mishimoto Lifetime Warranty to ensure that your Z is always performing, both on and off the track.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 1 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":562001051675,"title":"Mishimoto - Rockstar Subaru WRX Silicone Induction Hose - GRB GVB BL5 - MMHOSE-SUB-08IHRKST","handle":"mishimoto-rockstar-subaru-wrx-silicone-induction-hose-grb-gvb-bl5-mmhose-sub-08ihrkst","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-SUB-08IHRKST\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eLimited edition collaborative design by Rockstar Energy, Rockstar Garage, and Mishimoto\u003cbr\u003eDirect fit for the 2008–2014 WRX and 2005–2009 Legacy GT\/Outback XT\u003cbr\u003eFits with stock intake, Mishimoto Subaru WRX\/STI Performance Cold Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake\u003cbr\u003eQuicker turbo spool\u003cbr\u003eIncludes removable CNC-machined aluminum fittings for added durability and easier installation\u003cbr\u003eMolded steel rings for added reinforcement and resistance from collapsing\u003cbr\u003eMolded steel rings for added reinforcement and resistance from collapsing\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eMax Temp 330°F\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone induction hose for the 08–14 Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock Subaru turbo inlet hose. The Mishimoto WRX induction hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. The accessory ports of this induction hose come with CNC aluminum fittings with a 3-barb design that will not fall out or leak under load. This turbo inlet hose also comes with everything you’ll need for installation, including a robust 2.5\"\" T-bolt clamp for the turbo as well as added worm-gear clamps. Available in black, blue, or red, the silicone WRX induction hose retains stock fitment, the ultimate upgrade in performance and style. This hose will work with your stock airbox hose, Mishimoto Subaru WRX\/STI Performance Cold-Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake. As with all of our products, this hose comes with the Mishimoto Lifetime Warranty!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eLimited edition collaborative design by Rockstar Energy, Rockstar Garage, and Mishimoto\u003cbr\u003eDirect fit for the 2008–2014 WRX and 2005–2009 Legacy GT\/Outback XT\u003cbr\u003eFits with stock intake, Mishimoto Subaru WRX\/STI Performance Cold Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake\u003cbr\u003eQuicker turbo spool\u003cbr\u003eIncludes removable CNC-machined aluminum fittings for added durability and easier installation\u003cbr\u003eMolded steel rings for added reinforcement and resistance from collapsing\u003cbr\u003eMolded steel rings for added reinforcement and resistance from collapsing\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eMax Temp 330°F\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone induction hose for the 08–14 Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock Subaru turbo inlet hose. The Mishimoto WRX induction hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. The accessory ports of this induction hose come with CNC aluminum fittings with a 3-barb design that will not fall out or leak under load. This turbo inlet hose also comes with everything you’ll need for installation, including a robust 2.5\"\" T-bolt clamp for the turbo as well as added worm-gear clamps. Available in black, blue, or red, the silicone WRX induction hose retains stock fitment, the ultimate upgrade in performance and style. This hose will work with your stock airbox hose, Mishimoto Subaru WRX\/STI Performance Cold-Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake. As with all of our products, this hose comes with the Mishimoto Lifetime Warranty!\u003c!--split--\u003e0\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. 0\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2025-08-22T15:41:32+08:00","created_at":"2018-01-24T23:26:45+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","impreza-wrx-sti-grb-applied-a-2007-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-b-2009-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-c-2010-2012-tc-ej207-h4","impreza-wrx-sti-grb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-grb-applied-e-2013-2014-tc-ej207-h4","impreza-wrx-sti-gvb-applied-c-2007-2012-tc-ej207-h4","impreza-wrx-sti-gvb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-gvb-applied-e-2013-2014-tc-ej207-h4","intake","intake-hoses","legacy-b4-bl5-applied-a-2003-2004-na-ej20-h4","legacy-b4-bl5-applied-a-2003-2004-tc-ej20y-h4","legacy-b4-bl5-applied-b-2004-2005-na-ej20-h4","legacy-b4-bl5-applied-b-2004-2005-tc-ej20y-h4","legacy-b4-bl5-applied-c-2005-2006-na-ej20-h4","legacy-b4-bl5-applied-c-2005-2006-tc-ej20y-h4","legacy-b4-bl5-applied-d-2006-2007-na-ej20-h4","legacy-b4-bl5-applied-d-2006-2007-tc-ej20y-h4","legacy-b4-bl5-applied-e-2007-2008-na-ej20-h4","legacy-b4-bl5-applied-e-2007-2008-tc-ej20y-h4","legacy-b4-bl5-applied-f-2008-2009-na-ej20-h4","legacy-b4-bl5-applied-f-2008-2009-tc-ej20y-h4","mishimoto","subaru","US1","ws110"],"price":27130,"price_min":27130,"price_max":27130,"available":false,"price_varies":false,"compare_at_price":27100,"compare_at_price_min":27100,"compare_at_price_max":27100,"compare_at_price_varies":false,"variants":[{"id":5990400589851,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-SUB-08IHRKST","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Mishimoto - Rockstar Subaru WRX Silicone Induction Hose - GRB GVB BL5 - MMHOSE-SUB-08IHRKST","public_title":null,"options":["Default Title"],"price":27130,"weight":10000,"compare_at_price":27100,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-08IHRKST.jpg?v=1710154181"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-08IHRKST.jpg?v=1710154181","options":["Title"],"media":[{"alt":"Mishimoto - Rockstar Subaru WRX Silicone Induction Hose - GRB GVB BL5 - MMHOSE-SUB-08IHRKST - Rzcrewgarage","id":1351405600865,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-08IHRKST.jpg?v=1710154181"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-08IHRKST.jpg?v=1710154181","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-SUB-08IHRKST\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eLimited edition collaborative design by Rockstar Energy, Rockstar Garage, and Mishimoto\u003cbr\u003eDirect fit for the 2008–2014 WRX and 2005–2009 Legacy GT\/Outback XT\u003cbr\u003eFits with stock intake, Mishimoto Subaru WRX\/STI Performance Cold Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake\u003cbr\u003eQuicker turbo spool\u003cbr\u003eIncludes removable CNC-machined aluminum fittings for added durability and easier installation\u003cbr\u003eMolded steel rings for added reinforcement and resistance from collapsing\u003cbr\u003eMolded steel rings for added reinforcement and resistance from collapsing\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eMax Temp 330°F\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone induction hose for the 08–14 Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock Subaru turbo inlet hose. The Mishimoto WRX induction hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. The accessory ports of this induction hose come with CNC aluminum fittings with a 3-barb design that will not fall out or leak under load. This turbo inlet hose also comes with everything you’ll need for installation, including a robust 2.5\"\" T-bolt clamp for the turbo as well as added worm-gear clamps. Available in black, blue, or red, the silicone WRX induction hose retains stock fitment, the ultimate upgrade in performance and style. This hose will work with your stock airbox hose, Mishimoto Subaru WRX\/STI Performance Cold-Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake. As with all of our products, this hose comes with the Mishimoto Lifetime Warranty!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eLimited edition collaborative design by Rockstar Energy, Rockstar Garage, and Mishimoto\u003cbr\u003eDirect fit for the 2008–2014 WRX and 2005–2009 Legacy GT\/Outback XT\u003cbr\u003eFits with stock intake, Mishimoto Subaru WRX\/STI Performance Cold Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake\u003cbr\u003eQuicker turbo spool\u003cbr\u003eIncludes removable CNC-machined aluminum fittings for added durability and easier installation\u003cbr\u003eMolded steel rings for added reinforcement and resistance from collapsing\u003cbr\u003eMolded steel rings for added reinforcement and resistance from collapsing\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eMax Temp 330°F\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone induction hose for the 08–14 Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock Subaru turbo inlet hose. The Mishimoto WRX induction hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. The accessory ports of this induction hose come with CNC aluminum fittings with a 3-barb design that will not fall out or leak under load. This turbo inlet hose also comes with everything you’ll need for installation, including a robust 2.5\"\" T-bolt clamp for the turbo as well as added worm-gear clamps. Available in black, blue, or red, the silicone WRX induction hose retains stock fitment, the ultimate upgrade in performance and style. This hose will work with your stock airbox hose, Mishimoto Subaru WRX\/STI Performance Cold-Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake. As with all of our products, this hose comes with the Mishimoto Lifetime Warranty!\u003c!--split--\u003e0\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. 0\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561999413275,"title":"Mishimoto - Subaru WRX \/ WRX STI Silicone Induction Hose - Black - GDB GRB GVB GRF GVF - MMHOSE-SUB-IHBK","handle":"mishimoto-subaru-wrx-wrx-sti-silicone-induction-hose-black-gdb-grb-gvb-grf-gvf-mmhose-sub-ihbk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-SUB-IHBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for 2001–2007 Subaru WRX and 2004–2015 Subaru WRX STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eReinforced with wire to prevent collapse under pressure\u003cbr\u003eIncreased flow due to larger internal diameter\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) T-Bolt Clamp\u003cbr\u003e(3) Aluminum Push-On Fittings\u003cbr\u003e\u003cbr\u003eChassis Codes GD\u003cbr\u003eEngine Codes EJ255, EJ257\u003cbr\u003eOuter Diameter 2.40\" \u0026amp; 3.10\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.00\" \u0026amp; 2.60\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone turbo inlet hose for the Subaru WRX\/STI is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock hose. The Mishimoto Silicone Induction Hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. Available in black, blue, or red, these silicone turbo inlet hoses retain stock fitment, the ultimate upgrade in performance and style.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for 2001–2007 Subaru WRX and 2004–2015 Subaru WRX STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eReinforced with wire to prevent collapse under pressure\u003cbr\u003eIncreased flow due to larger internal diameter\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) T-Bolt Clamp\u003cbr\u003e(3) Aluminum Push-On Fittings\u003cbr\u003e\u003cbr\u003eChassis Codes GD\u003cbr\u003eEngine Codes EJ255, EJ257\u003cbr\u003eOuter Diameter 2.40\" \u0026amp; 3.10\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.00\" \u0026amp; 2.60\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone turbo inlet hose for the Subaru WRX\/STI is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock hose. The Mishimoto Silicone Induction Hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. Available in black, blue, or red, these silicone turbo inlet hoses retain stock fitment, the ultimate upgrade in performance and style.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:26:32+08:00","created_at":"2018-01-24T23:26:32+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","impreza-wrx-sti-a-line-grf-applied-b-2009-2009-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-c-2007-2012-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-c-2010-2012-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-gdb-applied-e-2004-2005-tc-ej207-h4","impreza-wrx-sti-gdb-applied-f-2005-2006-tc-ej207-h4","impreza-wrx-sti-gdb-applied-g-2006-2007-tc-ej207-h4","impreza-wrx-sti-grb-applied-a-2007-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-b-2009-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-c-2010-2012-tc-ej207-h4","impreza-wrx-sti-grb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-grb-applied-e-2013-2014-tc-ej207-h4","impreza-wrx-sti-gvb-applied-c-2007-2012-tc-ej207-h4","impreza-wrx-sti-gvb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-gvb-applied-e-2013-2014-tc-ej207-h4","intake","intake-hoses","mishimoto","subaru","US1","ws111"],"price":39140,"price_min":39140,"price_max":39140,"available":true,"price_varies":false,"compare_at_price":39200,"compare_at_price_min":39200,"compare_at_price_max":39200,"compare_at_price_varies":false,"variants":[{"id":5990398885915,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-SUB-IHBK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX \/ WRX STI Silicone Induction Hose - Black - GDB GRB GVB GRF GVF - MMHOSE-SUB-IHBK","public_title":null,"options":["Default Title"],"price":39140,"weight":5724,"compare_at_price":39200,"inventory_quantity":18,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-IHBK.jpg?v=1710154167"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-IHBK.jpg?v=1710154167","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX \/ WRX STI Silicone Induction Hose - Black - GDB GRB GVB GRF GVF - MMHOSE-SUB-IHBK - Rzcrewgarage","id":1351404847201,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-IHBK.jpg?v=1710154167"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-IHBK.jpg?v=1710154167","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-SUB-IHBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for 2001–2007 Subaru WRX and 2004–2015 Subaru WRX STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eReinforced with wire to prevent collapse under pressure\u003cbr\u003eIncreased flow due to larger internal diameter\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) T-Bolt Clamp\u003cbr\u003e(3) Aluminum Push-On Fittings\u003cbr\u003e\u003cbr\u003eChassis Codes GD\u003cbr\u003eEngine Codes EJ255, EJ257\u003cbr\u003eOuter Diameter 2.40\" \u0026amp; 3.10\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.00\" \u0026amp; 2.60\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone turbo inlet hose for the Subaru WRX\/STI is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock hose. The Mishimoto Silicone Induction Hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. Available in black, blue, or red, these silicone turbo inlet hoses retain stock fitment, the ultimate upgrade in performance and style.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for 2001–2007 Subaru WRX and 2004–2015 Subaru WRX STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eReinforced with wire to prevent collapse under pressure\u003cbr\u003eIncreased flow due to larger internal diameter\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) T-Bolt Clamp\u003cbr\u003e(3) Aluminum Push-On Fittings\u003cbr\u003e\u003cbr\u003eChassis Codes GD\u003cbr\u003eEngine Codes EJ255, EJ257\u003cbr\u003eOuter Diameter 2.40\" \u0026amp; 3.10\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.00\" \u0026amp; 2.60\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone turbo inlet hose for the Subaru WRX\/STI is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock hose. The Mishimoto Silicone Induction Hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. Available in black, blue, or red, these silicone turbo inlet hoses retain stock fitment, the ultimate upgrade in performance and style.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":562000363547,"title":"Mishimoto - Subaru WRX \/ WRX STI Silicone Induction Hose - Blue - GDB GRB GVB GRF GVF - MMHOSE-SUB-IHBL","handle":"mishimoto-subaru-wrx-wrx-sti-silicone-induction-hose-blue-gdb-grb-gvb-grf-gvf-mmhose-sub-ihbl","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-SUB-IHBL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for 2001–2007 Subaru WRX and 2004–2015 Subaru WRX STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eReinforced with wire to prevent collapse under pressure\u003cbr\u003eIncreased flow due to larger internal diameter\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) T-Bolt Clamp\u003cbr\u003e(3) Aluminum Push-On Fittings\u003cbr\u003e\u003cbr\u003eChassis Codes GD\u003cbr\u003eEngine Codes EJ255, EJ257\u003cbr\u003eOuter Diameter 2.40\" \u0026amp; 3.10\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.00\" \u0026amp; 2.60\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone turbo inlet hose for the Subaru WRX\/STI is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock hose. The Mishimoto Silicone Induction Hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. Available in black, blue, or red, these silicone turbo inlet hoses retain stock fitment, the ultimate upgrade in performance and style.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for 2001–2007 Subaru WRX and 2004–2015 Subaru WRX STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eReinforced with wire to prevent collapse under pressure\u003cbr\u003eIncreased flow due to larger internal diameter\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) T-Bolt Clamp\u003cbr\u003e(3) Aluminum Push-On Fittings\u003cbr\u003e\u003cbr\u003eChassis Codes GD\u003cbr\u003eEngine Codes EJ255, EJ257\u003cbr\u003eOuter Diameter 2.40\" \u0026amp; 3.10\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.00\" \u0026amp; 2.60\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone turbo inlet hose for the Subaru WRX\/STI is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock hose. The Mishimoto Silicone Induction Hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. Available in black, blue, or red, these silicone turbo inlet hoses retain stock fitment, the ultimate upgrade in performance and style.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 4 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:26:32+08:00","created_at":"2018-01-24T23:26:33+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","impreza-wrx-sti-a-line-grf-applied-b-2009-2009-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-c-2007-2012-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-c-2010-2012-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-gdb-applied-e-2004-2005-tc-ej207-h4","impreza-wrx-sti-gdb-applied-f-2005-2006-tc-ej207-h4","impreza-wrx-sti-gdb-applied-g-2006-2007-tc-ej207-h4","impreza-wrx-sti-grb-applied-a-2007-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-b-2009-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-c-2010-2012-tc-ej207-h4","impreza-wrx-sti-grb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-grb-applied-e-2013-2014-tc-ej207-h4","impreza-wrx-sti-gvb-applied-c-2007-2012-tc-ej207-h4","impreza-wrx-sti-gvb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-gvb-applied-e-2013-2014-tc-ej207-h4","intake","intake-hoses","mishimoto","subaru","US1","ws111"],"price":39140,"price_min":39140,"price_max":39140,"available":true,"price_varies":false,"compare_at_price":39200,"compare_at_price_min":39200,"compare_at_price_max":39200,"compare_at_price_varies":false,"variants":[{"id":5990399836187,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-SUB-IHBL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX \/ WRX STI Silicone Induction Hose - Blue - GDB GRB GVB GRF GVF - MMHOSE-SUB-IHBL","public_title":null,"options":["Default Title"],"price":39140,"weight":5588,"compare_at_price":39200,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-IHBL.jpg?v=1710154167"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-IHBL.jpg?v=1710154167","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX \/ WRX STI Silicone Induction Hose - Blue - GDB GRB GVB GRF GVF - MMHOSE-SUB-IHBL - Rzcrewgarage","id":1351404879969,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-IHBL.jpg?v=1710154167"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-IHBL.jpg?v=1710154167","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-SUB-IHBL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for 2001–2007 Subaru WRX and 2004–2015 Subaru WRX STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eReinforced with wire to prevent collapse under pressure\u003cbr\u003eIncreased flow due to larger internal diameter\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) T-Bolt Clamp\u003cbr\u003e(3) Aluminum Push-On Fittings\u003cbr\u003e\u003cbr\u003eChassis Codes GD\u003cbr\u003eEngine Codes EJ255, EJ257\u003cbr\u003eOuter Diameter 2.40\" \u0026amp; 3.10\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.00\" \u0026amp; 2.60\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone turbo inlet hose for the Subaru WRX\/STI is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock hose. The Mishimoto Silicone Induction Hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. Available in black, blue, or red, these silicone turbo inlet hoses retain stock fitment, the ultimate upgrade in performance and style.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for 2001–2007 Subaru WRX and 2004–2015 Subaru WRX STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eReinforced with wire to prevent collapse under pressure\u003cbr\u003eIncreased flow due to larger internal diameter\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) T-Bolt Clamp\u003cbr\u003e(3) Aluminum Push-On Fittings\u003cbr\u003e\u003cbr\u003eChassis Codes GD\u003cbr\u003eEngine Codes EJ255, EJ257\u003cbr\u003eOuter Diameter 2.40\" \u0026amp; 3.10\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.00\" \u0026amp; 2.60\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone turbo inlet hose for the Subaru WRX\/STI is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock hose. The Mishimoto Silicone Induction Hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. Available in black, blue, or red, these silicone turbo inlet hoses retain stock fitment, the ultimate upgrade in performance and style.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 4 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":562000429083,"title":"Mishimoto - Subaru WRX \/ WRX STI Silicone Induction Hose - Red - GDB GRB GVB GRF GVF - MMHOSE-SUB-IHRD","handle":"mishimoto-subaru-wrx-wrx-sti-silicone-induction-hose-red-gdb-grb-gvb-grf-gvf-mmhose-sub-ihrd","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-SUB-IHRD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for 2001–2007 Subaru WRX and 2004–2015 Subaru WRX STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eReinforced with wire to prevent collapse under pressure\u003cbr\u003eIncreased flow due to larger internal diameter\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) T-Bolt Clamp\u003cbr\u003e(3) Aluminum Push-On Fittings\u003cbr\u003e\u003cbr\u003eChassis Codes GD\u003cbr\u003eEngine Codes EJ255, EJ257\u003cbr\u003eOuter Diameter 2.40\" \u0026amp; 3.10\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.00\" \u0026amp; 2.60\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone turbo inlet hose for the Subaru WRX\/STI is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock hose. The Mishimoto Silicone Induction Hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. Available in black, blue, or red, these silicone turbo inlet hoses retain stock fitment, the ultimate upgrade in performance and style.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for 2001–2007 Subaru WRX and 2004–2015 Subaru WRX STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eReinforced with wire to prevent collapse under pressure\u003cbr\u003eIncreased flow due to larger internal diameter\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) T-Bolt Clamp\u003cbr\u003e(3) Aluminum Push-On Fittings\u003cbr\u003e\u003cbr\u003eChassis Codes GD\u003cbr\u003eEngine Codes EJ255, EJ257\u003cbr\u003eOuter Diameter 2.40\" \u0026amp; 3.10\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.00\" \u0026amp; 2.60\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone turbo inlet hose for the Subaru WRX\/STI is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock hose. The Mishimoto Silicone Induction Hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. Available in black, blue, or red, these silicone turbo inlet hoses retain stock fitment, the ultimate upgrade in performance and style.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:26:33+08:00","created_at":"2018-01-24T23:26:33+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","impreza-wrx-sti-a-line-grf-applied-b-2009-2009-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-c-2007-2012-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-c-2010-2012-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-gdb-applied-e-2004-2005-tc-ej207-h4","impreza-wrx-sti-gdb-applied-f-2005-2006-tc-ej207-h4","impreza-wrx-sti-gdb-applied-g-2006-2007-tc-ej207-h4","impreza-wrx-sti-grb-applied-a-2007-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-b-2009-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-c-2010-2012-tc-ej207-h4","impreza-wrx-sti-grb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-grb-applied-e-2013-2014-tc-ej207-h4","impreza-wrx-sti-gvb-applied-c-2007-2012-tc-ej207-h4","impreza-wrx-sti-gvb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-gvb-applied-e-2013-2014-tc-ej207-h4","intake","intake-hoses","mishimoto","subaru","US1","ws111"],"price":39140,"price_min":39140,"price_max":39140,"available":true,"price_varies":false,"compare_at_price":39200,"compare_at_price_min":39200,"compare_at_price_max":39200,"compare_at_price_varies":false,"variants":[{"id":5990399901723,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-SUB-IHRD","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX \/ WRX STI Silicone Induction Hose - Red - GDB GRB GVB GRF GVF - MMHOSE-SUB-IHRD","public_title":null,"options":["Default Title"],"price":39140,"weight":5588,"compare_at_price":39200,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-IHRD.jpg?v=1710154167"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-IHRD.jpg?v=1710154167","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX \/ WRX STI Silicone Induction Hose - Red - GDB GRB GVB GRF GVF - MMHOSE-SUB-IHRD - Rzcrewgarage","id":1351404912737,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-IHRD.jpg?v=1710154167"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-IHRD.jpg?v=1710154167","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-SUB-IHRD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for 2001–2007 Subaru WRX and 2004–2015 Subaru WRX STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eReinforced with wire to prevent collapse under pressure\u003cbr\u003eIncreased flow due to larger internal diameter\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) T-Bolt Clamp\u003cbr\u003e(3) Aluminum Push-On Fittings\u003cbr\u003e\u003cbr\u003eChassis Codes GD\u003cbr\u003eEngine Codes EJ255, EJ257\u003cbr\u003eOuter Diameter 2.40\" \u0026amp; 3.10\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.00\" \u0026amp; 2.60\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone turbo inlet hose for the Subaru WRX\/STI is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock hose. The Mishimoto Silicone Induction Hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. Available in black, blue, or red, these silicone turbo inlet hoses retain stock fitment, the ultimate upgrade in performance and style.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for 2001–2007 Subaru WRX and 2004–2015 Subaru WRX STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eReinforced with wire to prevent collapse under pressure\u003cbr\u003eIncreased flow due to larger internal diameter\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) T-Bolt Clamp\u003cbr\u003e(3) Aluminum Push-On Fittings\u003cbr\u003e\u003cbr\u003eChassis Codes GD\u003cbr\u003eEngine Codes EJ255, EJ257\u003cbr\u003eOuter Diameter 2.40\" \u0026amp; 3.10\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.00\" \u0026amp; 2.60\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone turbo inlet hose for the Subaru WRX\/STI is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock hose. The Mishimoto Silicone Induction Hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. Available in black, blue, or red, these silicone turbo inlet hoses retain stock fitment, the ultimate upgrade in performance and style.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561997250587,"title":"Mishimoto - Subaru WRX Silicone Induction Hose - Black - GH GE GR GV BL9 BP9 - MMHOSE-SUB-08IHBK","handle":"mishimoto-subaru-wrx-silicone-induction-hose-black-gh-ge-gr-gv-bl9-bp9-mmhose-sub-08ihbk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-SUB-08IHBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2008–2014 WRX and 2005–2009\u003cbr\u003eFits with stock intake, Mishimoto Subaru WRX\/STI Performance Cold Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake\u003cbr\u003eQuicker turbo spool\u003cbr\u003eIncludes removable CNC-machined aluminum fittings for added durability and easier installation\u003cbr\u003eMolded steel rings for added reinforcement and resistance from collapsing\u003cbr\u003eNo tune required\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) 2.5” T-Bolt Clamp\u003cbr\u003e(2) 13mm–22mm Worm-Gear Clamps\u003cbr\u003e(4) Aluminum Push-On Fittings\u003cbr\u003e(1) Outlet Pipe\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eChassis Codes GE, GH, GR, GV\u003cbr\u003eAlso Fits 2005–2009 Subaru Legacy GT, 2005–2009 Subaru Outback XT\u003cbr\u003eEngine Codes EJ205, EJ255\u003cbr\u003eOuter Diameter 2.63”–3.25” \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.38” (turbo side)–2.75” (intake side)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone induction hose for the 08–14 Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock Subaru turbo inlet hose. \u003cbr\u003e\u003cbr\u003eThe Mishimoto WRX induction hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. The accessory ports of this induction hose come with CNC aluminum fittings with a 3-barb design that will not fall out or leak under load. This turbo inlet hose also comes with everything you’ll need for installation, including a robust 2.5\" T-bolt clamp for the turbo as well as added worm-gear clamps. \u003cbr\u003e\u003cbr\u003eAvailable in black, blue, or red, the silicone WRX induction hose retains stock fitment, the ultimate upgrade in performance and style. This hose will work with your stock airbox hose, Mishimoto Subaru WRX\/STI Performance Cold-Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake. As with all of our products, this hose comes with the Mishimoto Lifetime Warranty!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2008–2014 WRX and 2005–2009\u003cbr\u003eFits with stock intake, Mishimoto Subaru WRX\/STI Performance Cold Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake\u003cbr\u003eQuicker turbo spool\u003cbr\u003eIncludes removable CNC-machined aluminum fittings for added durability and easier installation\u003cbr\u003eMolded steel rings for added reinforcement and resistance from collapsing\u003cbr\u003eNo tune required\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) 2.5” T-Bolt Clamp\u003cbr\u003e(2) 13mm–22mm Worm-Gear Clamps\u003cbr\u003e(4) Aluminum Push-On Fittings\u003cbr\u003e(1) Outlet Pipe\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eChassis Codes GE, GH, GR, GV\u003cbr\u003eAlso Fits 2005–2009 Subaru Legacy GT, 2005–2009 Subaru Outback XT\u003cbr\u003eEngine Codes EJ205, EJ255\u003cbr\u003eOuter Diameter 2.63”–3.25” \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.38” (turbo side)–2.75” (intake side)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone induction hose for the 08–14 Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock Subaru turbo inlet hose. \u003cbr\u003e\u003cbr\u003eThe Mishimoto WRX induction hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. The accessory ports of this induction hose come with CNC aluminum fittings with a 3-barb design that will not fall out or leak under load. This turbo inlet hose also comes with everything you’ll need for installation, including a robust 2.5\" T-bolt clamp for the turbo as well as added worm-gear clamps. \u003cbr\u003e\u003cbr\u003eAvailable in black, blue, or red, the silicone WRX induction hose retains stock fitment, the ultimate upgrade in performance and style. This hose will work with your stock airbox hose, Mishimoto Subaru WRX\/STI Performance Cold-Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake. As with all of our products, this hose comes with the Mishimoto Lifetime Warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:26:08+08:00","created_at":"2018-01-24T23:26:09+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","impreza-wrx-hatch-gh6-applied-e-2008-2014-tc-ej255-h4","impreza-wrx-sedan-ge6-applied-e-2008-2014-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-b-2009-2009-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-c-2007-2012-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-c-2010-2012-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-grb-applied-a-2007-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-b-2009-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-c-2010-2012-tc-ej207-h4","impreza-wrx-sti-grb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-grb-applied-e-2013-2014-tc-ej207-h4","impreza-wrx-sti-gvb-applied-c-2007-2012-tc-ej207-h4","impreza-wrx-sti-gvb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-gvb-applied-e-2013-2014-tc-ej207-h4","intake","intake-hoses","legacy-b4-bl9-applied-c-2005-2006-na-ej25-h4","legacy-b4-bl9-applied-d-2006-2007-na-ej25-h4","legacy-b4-bl9-applied-e-2007-2008-na-ej25-h4","legacy-b4-bl9-applied-f-2008-2009-na-ej25-h4","legacy-outback-bp9-applied-c-2005-2006-na-ej25-h4","legacy-outback-bp9-applied-d-2006-2007-na-ej25-h4","legacy-outback-bp9-applied-e-2007-2008-na-ej25-h4","legacy-outback-bp9-applied-f-2008-2009-na-ej25-h4","mishimoto","subaru","US1","ws110"],"price":41120,"price_min":41120,"price_max":41120,"available":true,"price_varies":false,"compare_at_price":41100,"compare_at_price_min":41100,"compare_at_price_max":41100,"compare_at_price_varies":false,"variants":[{"id":5990396461083,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-SUB-08IHBK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX Silicone Induction Hose - Black - GH GE GR GV BL9 BP9 - MMHOSE-SUB-08IHBK","public_title":null,"options":["Default Title"],"price":41120,"weight":5724,"compare_at_price":41100,"inventory_quantity":19,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-08IHBK.jpg?v=1710154145"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-08IHBK.jpg?v=1710154145","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX Silicone Induction Hose - Black - GH GE GR GV BL9 BP9 - MMHOSE-SUB-08IHBK - Rzcrewgarage","id":1351403667553,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-08IHBK.jpg?v=1710154145"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-08IHBK.jpg?v=1710154145","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-SUB-08IHBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2008–2014 WRX and 2005–2009\u003cbr\u003eFits with stock intake, Mishimoto Subaru WRX\/STI Performance Cold Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake\u003cbr\u003eQuicker turbo spool\u003cbr\u003eIncludes removable CNC-machined aluminum fittings for added durability and easier installation\u003cbr\u003eMolded steel rings for added reinforcement and resistance from collapsing\u003cbr\u003eNo tune required\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) 2.5” T-Bolt Clamp\u003cbr\u003e(2) 13mm–22mm Worm-Gear Clamps\u003cbr\u003e(4) Aluminum Push-On Fittings\u003cbr\u003e(1) Outlet Pipe\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eChassis Codes GE, GH, GR, GV\u003cbr\u003eAlso Fits 2005–2009 Subaru Legacy GT, 2005–2009 Subaru Outback XT\u003cbr\u003eEngine Codes EJ205, EJ255\u003cbr\u003eOuter Diameter 2.63”–3.25” \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.38” (turbo side)–2.75” (intake side)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone induction hose for the 08–14 Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock Subaru turbo inlet hose. \u003cbr\u003e\u003cbr\u003eThe Mishimoto WRX induction hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. The accessory ports of this induction hose come with CNC aluminum fittings with a 3-barb design that will not fall out or leak under load. This turbo inlet hose also comes with everything you’ll need for installation, including a robust 2.5\" T-bolt clamp for the turbo as well as added worm-gear clamps. \u003cbr\u003e\u003cbr\u003eAvailable in black, blue, or red, the silicone WRX induction hose retains stock fitment, the ultimate upgrade in performance and style. This hose will work with your stock airbox hose, Mishimoto Subaru WRX\/STI Performance Cold-Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake. As with all of our products, this hose comes with the Mishimoto Lifetime Warranty!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2008–2014 WRX and 2005–2009\u003cbr\u003eFits with stock intake, Mishimoto Subaru WRX\/STI Performance Cold Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake\u003cbr\u003eQuicker turbo spool\u003cbr\u003eIncludes removable CNC-machined aluminum fittings for added durability and easier installation\u003cbr\u003eMolded steel rings for added reinforcement and resistance from collapsing\u003cbr\u003eNo tune required\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) 2.5” T-Bolt Clamp\u003cbr\u003e(2) 13mm–22mm Worm-Gear Clamps\u003cbr\u003e(4) Aluminum Push-On Fittings\u003cbr\u003e(1) Outlet Pipe\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eChassis Codes GE, GH, GR, GV\u003cbr\u003eAlso Fits 2005–2009 Subaru Legacy GT, 2005–2009 Subaru Outback XT\u003cbr\u003eEngine Codes EJ205, EJ255\u003cbr\u003eOuter Diameter 2.63”–3.25” \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.38” (turbo side)–2.75” (intake side)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone induction hose for the 08–14 Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock Subaru turbo inlet hose. \u003cbr\u003e\u003cbr\u003eThe Mishimoto WRX induction hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. The accessory ports of this induction hose come with CNC aluminum fittings with a 3-barb design that will not fall out or leak under load. This turbo inlet hose also comes with everything you’ll need for installation, including a robust 2.5\" T-bolt clamp for the turbo as well as added worm-gear clamps. \u003cbr\u003e\u003cbr\u003eAvailable in black, blue, or red, the silicone WRX induction hose retains stock fitment, the ultimate upgrade in performance and style. This hose will work with your stock airbox hose, Mishimoto Subaru WRX\/STI Performance Cold-Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake. As with all of our products, this hose comes with the Mishimoto Lifetime Warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561997283355,"title":"Mishimoto - Subaru WRX Silicone Induction Hose - Blue - GH GE GR GV BL9 BP9 - MMHOSE-SUB-08IHBL","handle":"mishimoto-subaru-wrx-silicone-induction-hose-blue-gh-ge-gr-gv-bl9-bp9-mmhose-sub-08ihbl","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-SUB-08IHBL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2008–2014 WRX and 2005–2009\u003cbr\u003eFits with stock intake, Mishimoto Subaru WRX\/STI Performance Cold Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake\u003cbr\u003eQuicker turbo spool\u003cbr\u003eIncludes removable CNC-machined aluminum fittings for added durability and easier installation\u003cbr\u003eMolded steel rings for added reinforcement and resistance from collapsing\u003cbr\u003eNo tune required\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) 2.5” T-Bolt Clamp\u003cbr\u003e(2) 13mm–22mm Worm-Gear Clamps\u003cbr\u003e(4) Aluminum Push-On Fittings\u003cbr\u003e(1) Outlet Pipe\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eChassis Codes GE, GH, GR, GV\u003cbr\u003eAlso Fits 2005–2009 Subaru Legacy GT, 2005–2009 Subaru Outback XT\u003cbr\u003eEngine Codes EJ205, EJ255\u003cbr\u003eOuter Diameter 2.63”–3.25” \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.38” (turbo side)–2.75” (intake side)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone induction hose for the 08–14 Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock Subaru turbo inlet hose. \u003cbr\u003e\u003cbr\u003eThe Mishimoto WRX induction hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. The accessory ports of this induction hose come with CNC aluminum fittings with a 3-barb design that will not fall out or leak under load. This turbo inlet hose also comes with everything you’ll need for installation, including a robust 2.5\" T-bolt clamp for the turbo as well as added worm-gear clamps. \u003cbr\u003e\u003cbr\u003eAvailable in black, blue, or red, the silicone WRX induction hose retains stock fitment, the ultimate upgrade in performance and style. This hose will work with your stock airbox hose, Mishimoto Subaru WRX\/STI Performance Cold-Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake. As with all of our products, this hose comes with the Mishimoto Lifetime Warranty!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2008–2014 WRX and 2005–2009\u003cbr\u003eFits with stock intake, Mishimoto Subaru WRX\/STI Performance Cold Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake\u003cbr\u003eQuicker turbo spool\u003cbr\u003eIncludes removable CNC-machined aluminum fittings for added durability and easier installation\u003cbr\u003eMolded steel rings for added reinforcement and resistance from collapsing\u003cbr\u003eNo tune required\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) 2.5” T-Bolt Clamp\u003cbr\u003e(2) 13mm–22mm Worm-Gear Clamps\u003cbr\u003e(4) Aluminum Push-On Fittings\u003cbr\u003e(1) Outlet Pipe\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eChassis Codes GE, GH, GR, GV\u003cbr\u003eAlso Fits 2005–2009 Subaru Legacy GT, 2005–2009 Subaru Outback XT\u003cbr\u003eEngine Codes EJ205, EJ255\u003cbr\u003eOuter Diameter 2.63”–3.25” \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.38” (turbo side)–2.75” (intake side)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone induction hose for the 08–14 Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock Subaru turbo inlet hose. \u003cbr\u003e\u003cbr\u003eThe Mishimoto WRX induction hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. The accessory ports of this induction hose come with CNC aluminum fittings with a 3-barb design that will not fall out or leak under load. This turbo inlet hose also comes with everything you’ll need for installation, including a robust 2.5\" T-bolt clamp for the turbo as well as added worm-gear clamps. \u003cbr\u003e\u003cbr\u003eAvailable in black, blue, or red, the silicone WRX induction hose retains stock fitment, the ultimate upgrade in performance and style. This hose will work with your stock airbox hose, Mishimoto Subaru WRX\/STI Performance Cold-Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake. As with all of our products, this hose comes with the Mishimoto Lifetime Warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 4 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:26:09+08:00","created_at":"2018-01-24T23:26:09+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","impreza-wrx-hatch-gh6-applied-e-2008-2014-tc-ej255-h4","impreza-wrx-sedan-ge6-applied-e-2008-2014-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-b-2009-2009-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-c-2007-2012-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-c-2010-2012-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-grb-applied-a-2007-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-b-2009-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-c-2010-2012-tc-ej207-h4","impreza-wrx-sti-grb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-grb-applied-e-2013-2014-tc-ej207-h4","impreza-wrx-sti-gvb-applied-c-2007-2012-tc-ej207-h4","impreza-wrx-sti-gvb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-gvb-applied-e-2013-2014-tc-ej207-h4","intake","intake-hoses","legacy-b4-bl9-applied-c-2005-2006-na-ej25-h4","legacy-b4-bl9-applied-d-2006-2007-na-ej25-h4","legacy-b4-bl9-applied-e-2007-2008-na-ej25-h4","legacy-b4-bl9-applied-f-2008-2009-na-ej25-h4","legacy-outback-bp9-applied-c-2005-2006-na-ej25-h4","legacy-outback-bp9-applied-d-2006-2007-na-ej25-h4","legacy-outback-bp9-applied-e-2007-2008-na-ej25-h4","legacy-outback-bp9-applied-f-2008-2009-na-ej25-h4","mishimoto","subaru","US1","ws110"],"price":41120,"price_min":41120,"price_max":41120,"available":true,"price_varies":false,"compare_at_price":41100,"compare_at_price_min":41100,"compare_at_price_max":41100,"compare_at_price_varies":false,"variants":[{"id":5990396493851,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-SUB-08IHBL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX Silicone Induction Hose - Blue - GH GE GR GV BL9 BP9 - MMHOSE-SUB-08IHBL","public_title":null,"options":["Default Title"],"price":41120,"weight":5678,"compare_at_price":41100,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-08IHBL.jpg?v=1710154147"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-08IHBL.jpg?v=1710154147","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX Silicone Induction Hose - Blue - GH GE GR GV BL9 BP9 - MMHOSE-SUB-08IHBL - Rzcrewgarage","id":1351403700321,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-08IHBL.jpg?v=1710154147"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-08IHBL.jpg?v=1710154147","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-SUB-08IHBL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2008–2014 WRX and 2005–2009\u003cbr\u003eFits with stock intake, Mishimoto Subaru WRX\/STI Performance Cold Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake\u003cbr\u003eQuicker turbo spool\u003cbr\u003eIncludes removable CNC-machined aluminum fittings for added durability and easier installation\u003cbr\u003eMolded steel rings for added reinforcement and resistance from collapsing\u003cbr\u003eNo tune required\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) 2.5” T-Bolt Clamp\u003cbr\u003e(2) 13mm–22mm Worm-Gear Clamps\u003cbr\u003e(4) Aluminum Push-On Fittings\u003cbr\u003e(1) Outlet Pipe\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eChassis Codes GE, GH, GR, GV\u003cbr\u003eAlso Fits 2005–2009 Subaru Legacy GT, 2005–2009 Subaru Outback XT\u003cbr\u003eEngine Codes EJ205, EJ255\u003cbr\u003eOuter Diameter 2.63”–3.25” \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.38” (turbo side)–2.75” (intake side)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone induction hose for the 08–14 Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock Subaru turbo inlet hose. \u003cbr\u003e\u003cbr\u003eThe Mishimoto WRX induction hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. The accessory ports of this induction hose come with CNC aluminum fittings with a 3-barb design that will not fall out or leak under load. This turbo inlet hose also comes with everything you’ll need for installation, including a robust 2.5\" T-bolt clamp for the turbo as well as added worm-gear clamps. \u003cbr\u003e\u003cbr\u003eAvailable in black, blue, or red, the silicone WRX induction hose retains stock fitment, the ultimate upgrade in performance and style. This hose will work with your stock airbox hose, Mishimoto Subaru WRX\/STI Performance Cold-Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake. As with all of our products, this hose comes with the Mishimoto Lifetime Warranty!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2008–2014 WRX and 2005–2009\u003cbr\u003eFits with stock intake, Mishimoto Subaru WRX\/STI Performance Cold Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake\u003cbr\u003eQuicker turbo spool\u003cbr\u003eIncludes removable CNC-machined aluminum fittings for added durability and easier installation\u003cbr\u003eMolded steel rings for added reinforcement and resistance from collapsing\u003cbr\u003eNo tune required\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) 2.5” T-Bolt Clamp\u003cbr\u003e(2) 13mm–22mm Worm-Gear Clamps\u003cbr\u003e(4) Aluminum Push-On Fittings\u003cbr\u003e(1) Outlet Pipe\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eChassis Codes GE, GH, GR, GV\u003cbr\u003eAlso Fits 2005–2009 Subaru Legacy GT, 2005–2009 Subaru Outback XT\u003cbr\u003eEngine Codes EJ205, EJ255\u003cbr\u003eOuter Diameter 2.63”–3.25” \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.38” (turbo side)–2.75” (intake side)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone induction hose for the 08–14 Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock Subaru turbo inlet hose. \u003cbr\u003e\u003cbr\u003eThe Mishimoto WRX induction hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. The accessory ports of this induction hose come with CNC aluminum fittings with a 3-barb design that will not fall out or leak under load. This turbo inlet hose also comes with everything you’ll need for installation, including a robust 2.5\" T-bolt clamp for the turbo as well as added worm-gear clamps. \u003cbr\u003e\u003cbr\u003eAvailable in black, blue, or red, the silicone WRX induction hose retains stock fitment, the ultimate upgrade in performance and style. This hose will work with your stock airbox hose, Mishimoto Subaru WRX\/STI Performance Cold-Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake. As with all of our products, this hose comes with the Mishimoto Lifetime Warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 4 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561997316123,"title":"Mishimoto - Subaru WRX Silicone Induction Hose - Red - GH GE GR GV BL9 BP9 - MMHOSE-SUB-08IHRD","handle":"mishimoto-subaru-wrx-silicone-induction-hose-red-gh-ge-gr-gv-bl9-bp9-mmhose-sub-08ihrd","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-SUB-08IHRD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2008–2014 WRX and 2005–2009\u003cbr\u003eFits with stock intake, Mishimoto Subaru WRX\/STI Performance Cold Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake\u003cbr\u003eQuicker turbo spool\u003cbr\u003eIncludes removable CNC-machined aluminum fittings for added durability and easier installation\u003cbr\u003eMolded steel rings for added reinforcement and resistance from collapsing\u003cbr\u003eNo tune required\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) 2.5” T-Bolt Clamp\u003cbr\u003e(2) 13mm–22mm Worm-Gear Clamps\u003cbr\u003e(4) Aluminum Push-On Fittings\u003cbr\u003e(1) Outlet Pipe\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eChassis Codes GE, GH, GR, GV\u003cbr\u003eAlso Fits 2005–2009 Subaru Legacy GT, 2005–2009 Subaru Outback XT\u003cbr\u003eEngine Codes EJ205, EJ255\u003cbr\u003eOuter Diameter 2.63”–3.25” \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.38” (turbo side)–2.75” (intake side)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone induction hose for the 08–14 Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock Subaru turbo inlet hose. \u003cbr\u003e\u003cbr\u003eThe Mishimoto WRX induction hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. The accessory ports of this induction hose come with CNC aluminum fittings with a 3-barb design that will not fall out or leak under load. This turbo inlet hose also comes with everything you’ll need for installation, including a robust 2.5\" T-bolt clamp for the turbo as well as added worm-gear clamps. \u003cbr\u003e\u003cbr\u003eAvailable in black, blue, or red, the silicone WRX induction hose retains stock fitment, the ultimate upgrade in performance and style. This hose will work with your stock airbox hose, Mishimoto Subaru WRX\/STI Performance Cold-Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake. As with all of our products, this hose comes with the Mishimoto Lifetime Warranty!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2008–2014 WRX and 2005–2009\u003cbr\u003eFits with stock intake, Mishimoto Subaru WRX\/STI Performance Cold Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake\u003cbr\u003eQuicker turbo spool\u003cbr\u003eIncludes removable CNC-machined aluminum fittings for added durability and easier installation\u003cbr\u003eMolded steel rings for added reinforcement and resistance from collapsing\u003cbr\u003eNo tune required\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) 2.5” T-Bolt Clamp\u003cbr\u003e(2) 13mm–22mm Worm-Gear Clamps\u003cbr\u003e(4) Aluminum Push-On Fittings\u003cbr\u003e(1) Outlet Pipe\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eChassis Codes GE, GH, GR, GV\u003cbr\u003eAlso Fits 2005–2009 Subaru Legacy GT, 2005–2009 Subaru Outback XT\u003cbr\u003eEngine Codes EJ205, EJ255\u003cbr\u003eOuter Diameter 2.63”–3.25” \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.38” (turbo side)–2.75” (intake side)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone induction hose for the 08–14 Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock Subaru turbo inlet hose. \u003cbr\u003e\u003cbr\u003eThe Mishimoto WRX induction hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. The accessory ports of this induction hose come with CNC aluminum fittings with a 3-barb design that will not fall out or leak under load. This turbo inlet hose also comes with everything you’ll need for installation, including a robust 2.5\" T-bolt clamp for the turbo as well as added worm-gear clamps. \u003cbr\u003e\u003cbr\u003eAvailable in black, blue, or red, the silicone WRX induction hose retains stock fitment, the ultimate upgrade in performance and style. This hose will work with your stock airbox hose, Mishimoto Subaru WRX\/STI Performance Cold-Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake. As with all of our products, this hose comes with the Mishimoto Lifetime Warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 5 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:26:10+08:00","created_at":"2018-01-24T23:26:10+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","impreza-wrx-hatch-gh6-applied-e-2008-2014-tc-ej255-h4","impreza-wrx-sedan-ge6-applied-e-2008-2014-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-b-2009-2009-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-c-2007-2012-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-c-2010-2012-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-grb-applied-a-2007-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-b-2009-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-c-2010-2012-tc-ej207-h4","impreza-wrx-sti-grb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-grb-applied-e-2013-2014-tc-ej207-h4","impreza-wrx-sti-gvb-applied-c-2007-2012-tc-ej207-h4","impreza-wrx-sti-gvb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-gvb-applied-e-2013-2014-tc-ej207-h4","intake","intake-hoses","legacy-b4-bl9-applied-c-2005-2006-na-ej25-h4","legacy-b4-bl9-applied-d-2006-2007-na-ej25-h4","legacy-b4-bl9-applied-e-2007-2008-na-ej25-h4","legacy-b4-bl9-applied-f-2008-2009-na-ej25-h4","legacy-outback-bp9-applied-c-2005-2006-na-ej25-h4","legacy-outback-bp9-applied-d-2006-2007-na-ej25-h4","legacy-outback-bp9-applied-e-2007-2008-na-ej25-h4","legacy-outback-bp9-applied-f-2008-2009-na-ej25-h4","mishimoto","subaru","US1","ws110"],"price":41120,"price_min":41120,"price_max":41120,"available":true,"price_varies":false,"compare_at_price":41100,"compare_at_price_min":41100,"compare_at_price_max":41100,"compare_at_price_varies":false,"variants":[{"id":5990396526619,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-SUB-08IHRD","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX Silicone Induction Hose - Red - GH GE GR GV BL9 BP9 - MMHOSE-SUB-08IHRD","public_title":null,"options":["Default Title"],"price":41120,"weight":5633,"compare_at_price":41100,"inventory_quantity":17,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-08IHRD.jpg?v=1710154147"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-08IHRD.jpg?v=1710154147","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX Silicone Induction Hose - Red - GH GE GR GV BL9 BP9 - MMHOSE-SUB-08IHRD - Rzcrewgarage","id":1351403733089,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-08IHRD.jpg?v=1710154147"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-08IHRD.jpg?v=1710154147","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-SUB-08IHRD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2008–2014 WRX and 2005–2009\u003cbr\u003eFits with stock intake, Mishimoto Subaru WRX\/STI Performance Cold Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake\u003cbr\u003eQuicker turbo spool\u003cbr\u003eIncludes removable CNC-machined aluminum fittings for added durability and easier installation\u003cbr\u003eMolded steel rings for added reinforcement and resistance from collapsing\u003cbr\u003eNo tune required\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) 2.5” T-Bolt Clamp\u003cbr\u003e(2) 13mm–22mm Worm-Gear Clamps\u003cbr\u003e(4) Aluminum Push-On Fittings\u003cbr\u003e(1) Outlet Pipe\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eChassis Codes GE, GH, GR, GV\u003cbr\u003eAlso Fits 2005–2009 Subaru Legacy GT, 2005–2009 Subaru Outback XT\u003cbr\u003eEngine Codes EJ205, EJ255\u003cbr\u003eOuter Diameter 2.63”–3.25” \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.38” (turbo side)–2.75” (intake side)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone induction hose for the 08–14 Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock Subaru turbo inlet hose. \u003cbr\u003e\u003cbr\u003eThe Mishimoto WRX induction hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. The accessory ports of this induction hose come with CNC aluminum fittings with a 3-barb design that will not fall out or leak under load. This turbo inlet hose also comes with everything you’ll need for installation, including a robust 2.5\" T-bolt clamp for the turbo as well as added worm-gear clamps. \u003cbr\u003e\u003cbr\u003eAvailable in black, blue, or red, the silicone WRX induction hose retains stock fitment, the ultimate upgrade in performance and style. This hose will work with your stock airbox hose, Mishimoto Subaru WRX\/STI Performance Cold-Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake. As with all of our products, this hose comes with the Mishimoto Lifetime Warranty!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2008–2014 WRX and 2005–2009\u003cbr\u003eFits with stock intake, Mishimoto Subaru WRX\/STI Performance Cold Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake\u003cbr\u003eQuicker turbo spool\u003cbr\u003eIncludes removable CNC-machined aluminum fittings for added durability and easier installation\u003cbr\u003eMolded steel rings for added reinforcement and resistance from collapsing\u003cbr\u003eNo tune required\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) 2.5” T-Bolt Clamp\u003cbr\u003e(2) 13mm–22mm Worm-Gear Clamps\u003cbr\u003e(4) Aluminum Push-On Fittings\u003cbr\u003e(1) Outlet Pipe\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eChassis Codes GE, GH, GR, GV\u003cbr\u003eAlso Fits 2005–2009 Subaru Legacy GT, 2005–2009 Subaru Outback XT\u003cbr\u003eEngine Codes EJ205, EJ255\u003cbr\u003eOuter Diameter 2.63”–3.25” \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.38” (turbo side)–2.75” (intake side)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone induction hose for the 08–14 Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock Subaru turbo inlet hose. \u003cbr\u003e\u003cbr\u003eThe Mishimoto WRX induction hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. The accessory ports of this induction hose come with CNC aluminum fittings with a 3-barb design that will not fall out or leak under load. This turbo inlet hose also comes with everything you’ll need for installation, including a robust 2.5\" T-bolt clamp for the turbo as well as added worm-gear clamps. \u003cbr\u003e\u003cbr\u003eAvailable in black, blue, or red, the silicone WRX induction hose retains stock fitment, the ultimate upgrade in performance and style. This hose will work with your stock airbox hose, Mishimoto Subaru WRX\/STI Performance Cold-Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake. As with all of our products, this hose comes with the Mishimoto Lifetime Warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 5 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":7265162723510,"title":"Mugen High Performance Air Cleaner Replacement Filter Element - Honda - Civic Type R FD2R","handle":"mugen-high-performance-air-cleaner-replacement-filter-element-fd2r-17220-xkpc-0000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mugen\u003cbr\u003eReference Number: 17220-XKPC-0000\u003cbr\u003eIntake Type: Drop In Filter\u003cbr\u003e\u003cbr\u003eCompatible with High Performance Air Cleaner Kits: 17200-XKPC-K0S0\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R | FD2R | 2007-2010 | NA | K20A | I4\u003c!--split--\u003e","published_at":"2022-02-22T16:46:46+08:00","created_at":"2022-02-22T16:40:34+08:00","vendor":"Mugen","type":"Intake Kits","tags":["2007","2008","2009","2010","civic-type-r-fd2r-2007-2010-na-k20a-i4","drop-in-filter","honda","intake","intake-kits","JP1","mugen","ws17"],"price":12070,"price_min":12070,"price_max":12070,"available":true,"price_varies":false,"compare_at_price":11800,"compare_at_price_min":11800,"compare_at_price_max":11800,"compare_at_price_varies":false,"variants":[{"id":41237177106614,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"17220-XKPC-0000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mugen High Performance Air Cleaner Replacement Filter Element - Honda - Civic Type R FD2R","public_title":null,"options":["Default Title"],"price":12070,"weight":1000,"compare_at_price":11800,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/mugen-high-performance-air-cleaner-replacement-filter-element-honda-civic-type-r-fd2r-rzcrew.jpg?v=1710321017"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/mugen-high-performance-air-cleaner-replacement-filter-element-honda-civic-type-r-fd2r-rzcrew.jpg?v=1710321017","options":["Title"],"media":[{"alt":"Mugen High Performance Air Cleaner Replacement Filter Element - FD2R - 17220-XKPC-0000","id":25426865848502,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/mugen-high-performance-air-cleaner-replacement-filter-element-honda-civic-type-r-fd2r-rzcrew.jpg?v=1710321017"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/mugen-high-performance-air-cleaner-replacement-filter-element-honda-civic-type-r-fd2r-rzcrew.jpg?v=1710321017","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mugen\u003cbr\u003eReference Number: 17220-XKPC-0000\u003cbr\u003eIntake Type: Drop In Filter\u003cbr\u003e\u003cbr\u003eCompatible with High Performance Air Cleaner Kits: 17200-XKPC-K0S0\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R | FD2R | 2007-2010 | NA | K20A | I4\u003c!--split--\u003e"}

{"id":420636753947,"title":"Mugen Intake System - Honda - Civic Type R FD2R","handle":"mugen-intake-system-fd2r-17200-xkpc-k0s0","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mugen\u003cbr\u003eReference Number: 17200-XKPC-K0S0\u003cbr\u003eIntake Type: Airbox\u003cbr\u003e\u003cbr\u003eThere are many design considerations when developing an air intake system for street and race applications. The process is complex when peak HP numbers are not the only goal; a properly designed system will maximize torque and power throughout the RPM range. Consideration should be given to system volume, air inlet temperature, filter construction, sound and wave characteristics, system weight, and final fitment. Mugen High Performance Intake Systems incorporate all critical design criteria and as a result they fit perfectly, provide maximum torque and horsepower across the entire RPM range, and allow the driver to experience the engine note without being overpowered by extremely high sound levels.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R | FD2R | 2007-2010 | NA | K20A | I4\u003c!--split--\u003e","published_at":"2017-12-09T00:03:03+08:00","created_at":"2017-12-09T00:03:03+08:00","vendor":"Mugen","type":"Intake Kits","tags":["2007","2008","2009","2010","airbox","civic-type-r-fd2r-2007-2010-na-k20a-i4","honda","intake","intake-kits","JP1","mugen","ws110"],"price":144580,"price_min":144580,"price_max":144580,"available":true,"price_varies":false,"compare_at_price":151400,"compare_at_price_min":151400,"compare_at_price_max":151400,"compare_at_price_varies":false,"variants":[{"id":5119190532123,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"17200-XKPC-K0S0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mugen Intake System - Honda - Civic Type R FD2R","public_title":null,"options":["Default Title"],"price":144580,"weight":18000,"compare_at_price":151400,"inventory_quantity":49,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/17200-XKPC-K0S0_2bae3cd4-036a-4a25-a6b1-d3ffac34fb0d.jpg?v=1710150559"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/17200-XKPC-K0S0_2bae3cd4-036a-4a25-a6b1-d3ffac34fb0d.jpg?v=1710150559","options":["Title"],"media":[{"alt":"Mugen Intake System - FD2R - 17200-XKPC-K0S0","id":25426672582838,"position":1,"preview_image":{"aspect_ratio":1.12,"height":241,"width":270,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/17200-XKPC-K0S0_2bae3cd4-036a-4a25-a6b1-d3ffac34fb0d.jpg?v=1710150559"},"aspect_ratio":1.12,"height":241,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/17200-XKPC-K0S0_2bae3cd4-036a-4a25-a6b1-d3ffac34fb0d.jpg?v=1710150559","width":270}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mugen\u003cbr\u003eReference Number: 17200-XKPC-K0S0\u003cbr\u003eIntake Type: Airbox\u003cbr\u003e\u003cbr\u003eThere are many design considerations when developing an air intake system for street and race applications. The process is complex when peak HP numbers are not the only goal; a properly designed system will maximize torque and power throughout the RPM range. Consideration should be given to system volume, air inlet temperature, filter construction, sound and wave characteristics, system weight, and final fitment. Mugen High Performance Intake Systems incorporate all critical design criteria and as a result they fit perfectly, provide maximum torque and horsepower across the entire RPM range, and allow the driver to experience the engine note without being overpowered by extremely high sound levels.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R | FD2R | 2007-2010 | NA | K20A | I4\u003c!--split--\u003e"}

{"id":7151412248758,"title":"Pracworks Carbon Center Feed intake Manifold - Honda - Accord - CL9","handle":"pracworks-carbon-center-feed-intake-manifold-honda-accord-cl9-pcw-cfk20-cl9","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Pracworks\u003cbr\u003eReference Number: PCW-CFK20-CL9\u003cbr\u003eIntake Type: Intake Manifold\u003cbr\u003e\u003cbr\u003eThis is the Famous Pracworks Carbon Intake Manifold for the Honda K-series. \u003cbr\u003eThis intake manifold is simply beautiful with a mix of Billet and Pre-Preg Carbon Material, available in matte and brilliant finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- A newly designed 6 litres plenum with optimised airflow for better performance.\u003cbr\u003e- Full internal carbon velocity stack for improved flow.\u003cbr\u003e- 1.1 litre runners for constant torque.\u003cbr\u003e- Air sensor fitting in case you want to run it.\u003cbr\u003e- 15Whp gain in comparison to the famous Honda RRC.\u003cbr\u003e\u003cbr\u003eAll Pracworks Intake Manifolds feature high capacity plenums for better engine response and calculated oversized runners to ensure a faster airflow into the engine head. The billet aluminum flange is made to match the stock head for a seamless and turbulence-free air flow in the combustion chambers.\u003cbr\u003eThey also feature a coolant passage adapter (FD2R, CL7, FN2R) for a bolt-on and easy installation.\nThe results are improved power along the entire rev range, a simple bolt installation and a piece of art in your engine Bay.\u003cbr\u003e\n\u003cbr\u003e\nPracworks intake manifolds are direct-fit replacements to work with Mustang (Ford5.0) Throttle Body Flange up to 90mm.\u003cbr\u003eFits without Relocating Power steering pump. Compatible with Stock K-series Fuel Rail\u003cbr\u003eOptional billet fuel rail with fittings (-8ORB on both ends and M14X1.5 Center Hole)\u003cbr\u003eComes with coolant adapter to suit both K20 and K24 head\u003cbr\u003eElliptical Carbon Bell Design.\u003cbr\u003e\nThese manifolds are designed to be heavy duty to handle racing application without showing weaknesses or cracks.\u003cbr\u003e\n\u003cbr\u003e\nWe highly recommend to have your intake manifold professionally installed and tuned with a standalone ECU to get the best performance out of them.\u003cbr\u003e\u003cbr\u003eNew colours option available for the Billet parts: Please choose in the menu other colour and leave us a note durin Checkout. Available colours: Blue, silver, grey, purple, orange, black and gold.\u003cbr\u003e\u003cbr\u003eWhat's in the Box:\u003cbr\u003e- Prakwork Carbon Intake Manifold\u003cbr\u003e- 4x 6mm diameter aluminum Fittings\u003cbr\u003e- Water coolant passage adapter\u003cbr\u003e- All necessary hardware\u003cbr\u003e- Air temp sensor blockage plate\u003cbr\u003e\u003cbr\u003eFor NA applications, the Pracwork manifold generate between 10 to 15whp with supporting modifications (high cams, higher flow injectors, etc) and engine tuning. Please refer to the Dyno Attach in the picture selection. (Comparaison made with a RRC Manifold.\u003cbr\u003e\nThis intake manifold feature a multiple Throttle body pattern for: Mustang (Ford5.0) Throttle Body Flange up to 90mm.\u003cbr\u003e\u003cbr\u003eSpecification:\u003cbr\u003eThrottle body opening (mm): 90mm\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAccord | CL9 | 2002-2008 | NA | K24A3 | I4\u003c!--split--\u003e","published_at":"2021-11-05T18:37:21+08:00","created_at":"2021-11-05T18:37:28+08:00","vendor":"Pracworks","type":"Intake Manifolds","tags":["2002","2003","2004","2005","2006","2007","2008","accord-cl9-2002-2008-na-k24a3-i4","honda","intake","intake-manifold","intake-manifolds","manifolds","pracworks","sg1","ws111"],"price":186830,"price_min":186830,"price_max":235120,"available":true,"price_varies":true,"compare_at_price":197700,"compare_at_price_min":197700,"compare_at_price_max":248800,"compare_at_price_varies":true,"variants":[{"id":40835361996982,"title":"No \/ Standard Red Colour \/ Brilliant Coating","option1":"No","option2":"Standard Red Colour","option3":"Brilliant Coating","sku":"PCW-CFK20-CL9","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Pracworks Carbon Center Feed intake Manifold - Honda - Accord - CL9 - No \/ Standard Red Colour \/ Brilliant Coating","public_title":"No \/ Standard Red Colour \/ Brilliant Coating","options":["No","Standard Red Colour","Brilliant Coating"],"price":186830,"weight":12500,"compare_at_price":197700,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40835362029750,"title":"Yes \/ Standard Red Colour \/ Brilliant Coating","option1":"Yes","option2":"Standard Red Colour","option3":"Brilliant Coating","sku":"PCW-CFK20-CL9-FR","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Pracworks Carbon Center Feed intake Manifold - Honda - Accord - CL9 - Yes \/ Standard Red Colour \/ Brilliant Coating","public_title":"Yes \/ Standard Red Colour \/ Brilliant Coating","options":["Yes","Standard Red Colour","Brilliant Coating"],"price":206100,"weight":13500,"compare_at_price":218100,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40835362062518,"title":"No \/ Optional Colour \/ Brilliant Coating","option1":"No","option2":"Optional Colour","option3":"Brilliant Coating","sku":"PCW-CFK20-CL9-OC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Pracworks Carbon Center Feed intake Manifold - Honda - Accord - CL9 - No \/ Optional Colour \/ Brilliant Coating","public_title":"No \/ Optional Colour \/ Brilliant Coating","options":["No","Optional Colour","Brilliant Coating"],"price":199680,"weight":12500,"compare_at_price":211300,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40835362095286,"title":"Yes \/ Optional Colour \/ Brilliant Coating","option1":"Yes","option2":"Optional Colour","option3":"Brilliant Coating","sku":"PCW-CFK20-CL9-FR-OC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Pracworks Carbon Center Feed intake Manifold - Honda - Accord - CL9 - Yes \/ Optional Colour \/ Brilliant Coating","public_title":"Yes \/ Optional Colour \/ Brilliant Coating","options":["Yes","Optional Colour","Brilliant Coating"],"price":218960,"weight":13500,"compare_at_price":231700,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40835362128054,"title":"No \/ Standard Red Colour \/ Matte Finish","option1":"No","option2":"Standard Red Colour","option3":"Matte Finish","sku":"PCW-CFK20-CL9-MF","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Pracworks Carbon Center Feed intake Manifold - Honda - Accord - CL9 - No \/ Standard Red Colour \/ Matte Finish","public_title":"No \/ Standard Red Colour \/ Matte Finish","options":["No","Standard Red Colour","Matte Finish"],"price":202890,"weight":13500,"compare_at_price":214700,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40835362160822,"title":"Yes \/ Standard Red Colour \/ Matte Finish","option1":"Yes","option2":"Standard Red Colour","option3":"Matte Finish","sku":"PCW-CFK20-CL9-FR-MF","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Pracworks Carbon Center Feed intake Manifold - Honda - Accord - CL9 - Yes \/ Standard Red Colour \/ Matte Finish","public_title":"Yes \/ Standard Red Colour \/ Matte Finish","options":["Yes","Standard Red Colour","Matte Finish"],"price":222260,"weight":14500,"compare_at_price":235200,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40835362193590,"title":"No \/ Optional Colour \/ Matte Finish","option1":"No","option2":"Optional Colour","option3":"Matte Finish","sku":"PCW-CFK20-CL9-OC-MF","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Pracworks Carbon Center Feed intake Manifold - Honda - Accord - CL9 - No \/ Optional Colour \/ Matte Finish","public_title":"No \/ Optional Colour \/ Matte Finish","options":["No","Optional Colour","Matte Finish"],"price":215740,"weight":13500,"compare_at_price":228300,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":40835362226358,"title":"Yes \/ Optional Colour \/ Matte Finish","option1":"Yes","option2":"Optional Colour","option3":"Matte Finish","sku":"PCW-CFK20-CL9-FR-OC-MF","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Pracworks Carbon Center Feed intake Manifold - Honda - Accord - CL9 - Yes \/ Optional Colour \/ Matte Finish","public_title":"Yes \/ Optional Colour \/ Matte Finish","options":["Yes","Optional Colour","Matte Finish"],"price":235120,"weight":14500,"compare_at_price":248800,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/pracworks-carbon-center-feed-intake-manifold-honda-accord-cl9-rzcrew-1.jpg?v=1710322306","\/\/rzcrewgarage.com\/cdn\/shop\/products\/pracworks-carbon-center-feed-intake-manifold-honda-accord-cl9-rzcrew-2.jpg?v=1710322307","\/\/rzcrewgarage.com\/cdn\/shop\/products\/pracworks-carbon-center-feed-intake-manifold-honda-accord-cl9-rzcrew-3.jpg?v=1710322308","\/\/rzcrewgarage.com\/cdn\/shop\/products\/pracworks-carbon-center-feed-intake-manifold-honda-accord-cl9-rzcrew-4.jpg?v=1710322310","\/\/rzcrewgarage.com\/cdn\/shop\/products\/pracworks-carbon-center-feed-intake-manifold-honda-accord-cl9-rzcrew-5.jpg?v=1710322312","\/\/rzcrewgarage.com\/cdn\/shop\/products\/pracworks-carbon-center-feed-intake-manifold-honda-accord-cl9-rzcrew-6.jpg?v=1710322313","\/\/rzcrewgarage.com\/cdn\/shop\/products\/pracworks-carbon-center-feed-intake-manifold-honda-accord-cl9-rzcrew-7.png?v=1710322314","\/\/rzcrewgarage.com\/cdn\/shop\/products\/pracworks-carbon-center-feed-intake-manifold-honda-accord-cl9-rzcrew-8.png?v=1710322316"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/pracworks-carbon-center-feed-intake-manifold-honda-accord-cl9-rzcrew-1.jpg?v=1710322306","options":["Add Pracworks Fuel Rail","Anodisation:","Carbon Finish:"],"media":[{"alt":"Pracworks Carbon Center Feed intake Manifold - Honda - Accord - CL9","id":25435406860470,"position":1,"preview_image":{"aspect_ratio":1.549,"height":3346,"width":5184,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/pracworks-carbon-center-feed-intake-manifold-honda-accord-cl9-rzcrew-1.jpg?v=1710322306"},"aspect_ratio":1.549,"height":3346,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/pracworks-carbon-center-feed-intake-manifold-honda-accord-cl9-rzcrew-1.jpg?v=1710322306","width":5184},{"alt":"Pracworks Carbon Center Feed intake Manifold - Honda - Accord - CL9 - [variant sku] - RZCrewGarage","id":25435406893238,"position":2,"preview_image":{"aspect_ratio":1.549,"height":3346,"width":5184,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/pracworks-carbon-center-feed-intake-manifold-honda-accord-cl9-rzcrew-2.jpg?v=1710322307"},"aspect_ratio":1.549,"height":3346,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/pracworks-carbon-center-feed-intake-manifold-honda-accord-cl9-rzcrew-2.jpg?v=1710322307","width":5184},{"alt":"Pracworks Carbon Center Feed intake Manifold - Honda - Accord - CL9 - [variant sku] - RZCrewGarage","id":25435406926006,"position":3,"preview_image":{"aspect_ratio":1.549,"height":3346,"width":5184,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/pracworks-carbon-center-feed-intake-manifold-honda-accord-cl9-rzcrew-3.jpg?v=1710322308"},"aspect_ratio":1.549,"height":3346,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/pracworks-carbon-center-feed-intake-manifold-honda-accord-cl9-rzcrew-3.jpg?v=1710322308","width":5184},{"alt":"Pracworks Carbon Center Feed intake Manifold - Honda - Accord - CL9 - [variant sku] - RZCrewGarage","id":25435406958774,"position":4,"preview_image":{"aspect_ratio":1.494,"height":603,"width":901,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/pracworks-carbon-center-feed-intake-manifold-honda-accord-cl9-rzcrew-4.jpg?v=1710322310"},"aspect_ratio":1.494,"height":603,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/pracworks-carbon-center-feed-intake-manifold-honda-accord-cl9-rzcrew-4.jpg?v=1710322310","width":901},{"alt":"Pracworks Carbon Center Feed intake Manifold - Honda - Accord - CL9 - [variant sku] - RZCrewGarage","id":25435406991542,"position":5,"preview_image":{"aspect_ratio":1.776,"height":608,"width":1080,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/pracworks-carbon-center-feed-intake-manifold-honda-accord-cl9-rzcrew-5.jpg?v=1710322312"},"aspect_ratio":1.776,"height":608,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/pracworks-carbon-center-feed-intake-manifold-honda-accord-cl9-rzcrew-5.jpg?v=1710322312","width":1080},{"alt":"Pracworks Carbon Center Feed intake Manifold - Honda - Accord - CL9 - [variant sku] - RZCrewGarage","id":25435407024310,"position":6,"preview_image":{"aspect_ratio":2.222,"height":432,"width":960,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/pracworks-carbon-center-feed-intake-manifold-honda-accord-cl9-rzcrew-6.jpg?v=1710322313"},"aspect_ratio":2.222,"height":432,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/pracworks-carbon-center-feed-intake-manifold-honda-accord-cl9-rzcrew-6.jpg?v=1710322313","width":960},{"alt":"Pracworks Carbon Center Feed intake Manifold - Honda - Accord - CL9 - [variant sku] - RZCrewGarage","id":25435407057078,"position":7,"preview_image":{"aspect_ratio":1.814,"height":827,"width":1500,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/pracworks-carbon-center-feed-intake-manifold-honda-accord-cl9-rzcrew-7.png?v=1710322314"},"aspect_ratio":1.814,"height":827,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/pracworks-carbon-center-feed-intake-manifold-honda-accord-cl9-rzcrew-7.png?v=1710322314","width":1500},{"alt":"Pracworks Carbon Center Feed intake Manifold - Honda - Accord - CL9 - [variant sku] - RZCrewGarage","id":25435407089846,"position":8,"preview_image":{"aspect_ratio":1.559,"height":1125,"width":1754,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/pracworks-carbon-center-feed-intake-manifold-honda-accord-cl9-rzcrew-8.png?v=1710322316"},"aspect_ratio":1.559,"height":1125,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/pracworks-carbon-center-feed-intake-manifold-honda-accord-cl9-rzcrew-8.png?v=1710322316","width":1754}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Pracworks\u003cbr\u003eReference Number: PCW-CFK20-CL9\u003cbr\u003eIntake Type: Intake Manifold\u003cbr\u003e\u003cbr\u003eThis is the Famous Pracworks Carbon Intake Manifold for the Honda K-series. \u003cbr\u003eThis intake manifold is simply beautiful with a mix of Billet and Pre-Preg Carbon Material, available in matte and brilliant finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- A newly designed 6 litres plenum with optimised airflow for better performance.\u003cbr\u003e- Full internal carbon velocity stack for improved flow.\u003cbr\u003e- 1.1 litre runners for constant torque.\u003cbr\u003e- Air sensor fitting in case you want to run it.\u003cbr\u003e- 15Whp gain in comparison to the famous Honda RRC.\u003cbr\u003e\u003cbr\u003eAll Pracworks Intake Manifolds feature high capacity plenums for better engine response and calculated oversized runners to ensure a faster airflow into the engine head. The billet aluminum flange is made to match the stock head for a seamless and turbulence-free air flow in the combustion chambers.\u003cbr\u003eThey also feature a coolant passage adapter (FD2R, CL7, FN2R) for a bolt-on and easy installation.\nThe results are improved power along the entire rev range, a simple bolt installation and a piece of art in your engine Bay.\u003cbr\u003e\n\u003cbr\u003e\nPracworks intake manifolds are direct-fit replacements to work with Mustang (Ford5.0) Throttle Body Flange up to 90mm.\u003cbr\u003eFits without Relocating Power steering pump. Compatible with Stock K-series Fuel Rail\u003cbr\u003eOptional billet fuel rail with fittings (-8ORB on both ends and M14X1.5 Center Hole)\u003cbr\u003eComes with coolant adapter to suit both K20 and K24 head\u003cbr\u003eElliptical Carbon Bell Design.\u003cbr\u003e\nThese manifolds are designed to be heavy duty to handle racing application without showing weaknesses or cracks.\u003cbr\u003e\n\u003cbr\u003e\nWe highly recommend to have your intake manifold professionally installed and tuned with a standalone ECU to get the best performance out of them.\u003cbr\u003e\u003cbr\u003eNew colours option available for the Billet parts: Please choose in the menu other colour and leave us a note durin Checkout. Available colours: Blue, silver, grey, purple, orange, black and gold.\u003cbr\u003e\u003cbr\u003eWhat's in the Box:\u003cbr\u003e- Prakwork Carbon Intake Manifold\u003cbr\u003e- 4x 6mm diameter aluminum Fittings\u003cbr\u003e- Water coolant passage adapter\u003cbr\u003e- All necessary hardware\u003cbr\u003e- Air temp sensor blockage plate\u003cbr\u003e\u003cbr\u003eFor NA applications, the Pracwork manifold generate between 10 to 15whp with supporting modifications (high cams, higher flow injectors, etc) and engine tuning. Please refer to the Dyno Attach in the picture selection. (Comparaison made with a RRC Manifold.\u003cbr\u003e\nThis intake manifold feature a multiple Throttle body pattern for: Mustang (Ford5.0) Throttle Body Flange up to 90mm.\u003cbr\u003e\u003cbr\u003eSpecification:\u003cbr\u003eThrottle body opening (mm): 90mm\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAccord | CL9 | 2002-2008 | NA | K24A3 | I4\u003c!--split--\u003e"}