{"id":7552532447414,"title":"Recaro Japan - Base Frame Seat Rail Standard - Mazda - MX-5 Miata Roadster NCEC","handle":"recaro-japan-base-frame-seat-rail-standard-mazda-mx-5-miata-roadster-ncec","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003eReference Number: 2082.080.1\/ 2082.080.2\u003cbr\u003e\u003cbr\u003ePosition: \u003cbr\u003eNew structure frame. One position type.\u003cbr\u003eNotes and Remarks:\u003cbr\u003eVehicles equipped with side airbags require work to turn off the airbag warning light. The seating position is almost the same as the genuine seat (when using ST-JJ). Seat offset door side about 20mm (Recaro is closer to the door side). The amount of sliding to the rear is reduced by about 25mm compared to genuine.\u003cbr\u003e\u003cbr\u003e(Caution) It can only be attached to the seats listed in the matching information below. Includes side airbag canceller.\u003cbr\u003e\u003cbr\u003eAdjust the RMS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold RMS side adapter. Also, if there is interference with the interior, it can be alleviated by adjustment. Adjust the RCS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold RCS side adapter.\u003cbr\u003e\u003cbr\u003e Seat Fitting:\u003cbr\u003e This seat rail fits:\u003cbr\u003e\u003cbr\u003eLSR-6, 7, 7F, and 11 interfere with the interior resin parts (aero board) by several millimeters when the headrest is behind the slide position. \u003cbr\u003eFor SP-#, SP-#N, TS-#, and RS-#, the shoulder part interferes with the interior resin cover by several millimeters at the rear end of the slide position. \u003cbr\u003eSport-J, JJ, JC, D, DC interfered with the door armrest and center console by several mm on the backrest side, and the shoulder part interfered with the interior resin cover by about 10 to 15 mm at the rear end of the seat slide position.\u003cbr\u003e For the RS\/TS-# series, the offset adapter set for RS\/TS-G (product number 1700001J) allows the handle offset to be adjusted in 5mm increments from 5mm up to 15mm. \u003cbr\u003eAdjust the RMS to the optimum position (front\/rear height, left\/right offset 0\/5\/10mm) with the RMS side adapter (sold separately). Please put it on. In addition, even if there is interference with the interior, it is possible to soften it by adjusting. Please adjust the RCS to the optimum position (front\/rear height, left\/right offset 0\/5\/10mm) with the RCS side adapter (sold separately).\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMX-5 Miata Roadster | NCEC | 2005-2008 | NA | LF-VE | I4\u003c!--split--\u003e","published_at":"2023-02-06T16:04:37+08:00","created_at":"2023-02-06T16:03:14+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2005","2006","2007","2008","jp1","mazda","mx-5-miata-roadster-ncec-2005-2008-na-lf-ve-i4","NCEC","recaro-japan","seat-rails","ws12"],"price":21266,"price_min":21266,"price_max":21266,"available":true,"price_varies":false,"compare_at_price":21700,"compare_at_price_min":21700,"compare_at_price_max":21700,"compare_at_price_varies":false,"variants":[{"id":42090518675638,"title":"Left","option1":"Left","option2":null,"option3":null,"sku":"2082.080.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard - Mazda - MX-5 Miata Roadster NCEC - Left","public_title":"Left","options":["Left"],"price":21266,"weight":17000,"compare_at_price":21700,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42090518708406,"title":"Right","option1":"Right","option2":null,"option3":null,"sku":"2082.080.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard - Mazda - MX-5 Miata Roadster NCEC - Right","public_title":"Right","options":["Right"],"price":21266,"weight":17000,"compare_at_price":21700,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-mazda-mx-5-miata-roadster-ncec-rzcrew-1.jpg?v=1710318303","\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-mazda-mx-5-miata-roadster-ncec-rzcrew-2.jpg?v=1710318304"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-mazda-mx-5-miata-roadster-ncec-rzcrew-1.jpg?v=1710318303","options":["Side"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard - Mazda - MX-5 Miata Roadster NCEC","id":25861353275574,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-mazda-mx-5-miata-roadster-ncec-rzcrew-1.jpg?v=1710318303"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-mazda-mx-5-miata-roadster-ncec-rzcrew-1.jpg?v=1710318303","width":640},{"alt":"Recaro Japan - Base Frame Seat Rail Standard - Mazda - MX-5 Miata Roadster NCEC - [variant sku] - RZCrewGarage","id":25861353308342,"position":2,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-mazda-mx-5-miata-roadster-ncec-rzcrew-2.jpg?v=1710318304"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-mazda-mx-5-miata-roadster-ncec-rzcrew-2.jpg?v=1710318304","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003eReference Number: 2082.080.1\/ 2082.080.2\u003cbr\u003e\u003cbr\u003ePosition: \u003cbr\u003eNew structure frame. One position type.\u003cbr\u003eNotes and Remarks:\u003cbr\u003eVehicles equipped with side airbags require work to turn off the airbag warning light. The seating position is almost the same as the genuine seat (when using ST-JJ). Seat offset door side about 20mm (Recaro is closer to the door side). The amount of sliding to the rear is reduced by about 25mm compared to genuine.\u003cbr\u003e\u003cbr\u003e(Caution) It can only be attached to the seats listed in the matching information below. Includes side airbag canceller.\u003cbr\u003e\u003cbr\u003eAdjust the RMS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold RMS side adapter. Also, if there is interference with the interior, it can be alleviated by adjustment. Adjust the RCS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold RCS side adapter.\u003cbr\u003e\u003cbr\u003e Seat Fitting:\u003cbr\u003e This seat rail fits:\u003cbr\u003e\u003cbr\u003eLSR-6, 7, 7F, and 11 interfere with the interior resin parts (aero board) by several millimeters when the headrest is behind the slide position. \u003cbr\u003eFor SP-#, SP-#N, TS-#, and RS-#, the shoulder part interferes with the interior resin cover by several millimeters at the rear end of the slide position. \u003cbr\u003eSport-J, JJ, JC, D, DC interfered with the door armrest and center console by several mm on the backrest side, and the shoulder part interfered with the interior resin cover by about 10 to 15 mm at the rear end of the seat slide position.\u003cbr\u003e For the RS\/TS-# series, the offset adapter set for RS\/TS-G (product number 1700001J) allows the handle offset to be adjusted in 5mm increments from 5mm up to 15mm. \u003cbr\u003eAdjust the RMS to the optimum position (front\/rear height, left\/right offset 0\/5\/10mm) with the RMS side adapter (sold separately). Please put it on. In addition, even if there is interference with the interior, it is possible to soften it by adjusting. Please adjust the RCS to the optimum position (front\/rear height, left\/right offset 0\/5\/10mm) with the RCS side adapter (sold separately).\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMX-5 Miata Roadster | NCEC | 2005-2008 | NA | LF-VE | I4\u003c!--split--\u003e"}
Recaro Japan - Base Frame Seat Rail Standard - Mazda - MX-5 Miata Roadster NCEC
Specifications:
Manufacturer: Recaro Japan
Reference Number: 2082.080.1/ 2082.080.2
Position:
New structure frame. One position type.
Notes and Remarks:
Vehicles equipped with side airbags require work to turn off the airbag warning light. The seating position is almost the same as the genuine seat (when using ST-JJ). Seat offset door side about 20mm (Recaro is closer to the door side). The amount of sliding to the rear is reduced by about 25mm compared to genuine.
(Caution) It can only be attached to the seats listed in the matching information below. Includes side airbag canceller.
Adjust the RMS to the optimum position (front-back height, left-right offset 0/5/10 mm) with the separately sold RMS side adapter. Also, if there is interference with the interior, it can be alleviated by adjustment. Adjust the RCS to the optimum position (front-back height, left-right offset 0/5/10 mm) with the separately sold RCS side adapter.
Seat Fitting:
This seat rail fits:
LSR-6, 7, 7F, and 11 interfere with the interior resin parts (aero board) by several millimeters when the headrest is behind the slide position.
For SP-#, SP-#N, TS-#, and RS-#, the shoulder part interferes with the interior resin cover by several millimeters at the rear end of the slide position.
Sport-J, JJ, JC, D, DC interfered with the door armrest and center console by several mm on the backrest side, and the shoulder part interfered with the interior resin cover by about 10 to 15 mm at the rear end of the seat slide position.
For the RS/TS-# series, the offset adapter set for RS/TS-G (product number 1700001J) allows the handle offset to be adjusted in 5mm increments from 5mm up to 15mm.
Adjust the RMS to the optimum position (front/rear height, left/right offset 0/5/10mm) with the RMS side adapter (sold separately). Please put it on. In addition, even if there is interference with the interior, it is possible to soften it by adjusting. Please adjust the RCS to the optimum position (front/rear height, left/right offset 0/5/10mm) with the RCS side adapter (sold separately).
Manufacturer: Recaro Japan
Reference Number: 2082.080.1/ 2082.080.2
Position:
New structure frame. One position type.
Notes and Remarks:
Vehicles equipped with side airbags require work to turn off the airbag warning light. The seating position is almost the same as the genuine seat (when using ST-JJ). Seat offset door side about 20mm (Recaro is closer to the door side). The amount of sliding to the rear is reduced by about 25mm compared to genuine.
(Caution) It can only be attached to the seats listed in the matching information below. Includes side airbag canceller.
Adjust the RMS to the optimum position (front-back height, left-right offset 0/5/10 mm) with the separately sold RMS side adapter. Also, if there is interference with the interior, it can be alleviated by adjustment. Adjust the RCS to the optimum position (front-back height, left-right offset 0/5/10 mm) with the separately sold RCS side adapter.
Seat Fitting:
This seat rail fits:
LSR-6, 7, 7F, and 11 interfere with the interior resin parts (aero board) by several millimeters when the headrest is behind the slide position.
For SP-#, SP-#N, TS-#, and RS-#, the shoulder part interferes with the interior resin cover by several millimeters at the rear end of the slide position.
Sport-J, JJ, JC, D, DC interfered with the door armrest and center console by several mm on the backrest side, and the shoulder part interfered with the interior resin cover by about 10 to 15 mm at the rear end of the seat slide position.
For the RS/TS-# series, the offset adapter set for RS/TS-G (product number 1700001J) allows the handle offset to be adjusted in 5mm increments from 5mm up to 15mm.
Adjust the RMS to the optimum position (front/rear height, left/right offset 0/5/10mm) with the RMS side adapter (sold separately). Please put it on. In addition, even if there is interference with the interior, it is possible to soften it by adjusting. Please adjust the RCS to the optimum position (front/rear height, left/right offset 0/5/10mm) with the RCS side adapter (sold separately).
Taxes:
Singapore and Malaysia: All import taxes are included in our pricing.
Rest of the World: Other countries may have to pay their local import tax depending on your country's regulations.
Singapore and Malaysia: All import taxes are included in our pricing.
Rest of the World: Other countries may have to pay their local import tax depending on your country's regulations.
Shipping:
This product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.
Every Monday our team keeps you in the loop by sending out an "estimated time of arrival" email.
This product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.
Every Monday our team keeps you in the loop by sending out an "estimated time of arrival" email.
This part fits:
MX-5 Miata Roadster | NCEC | 2005-2008 | NA | LF-VE | I4
MX-5 Miata Roadster | NCEC | 2005-2008 | NA | LF-VE | I4
Related Products
5zigen Decat Pipe - Honda - Civic Type R FD2R
$301.00 $288.96
5zigen Miracle Fireball Muffler - Honda - Civic FD2
$1,123.00 $1,066.85
5zigen Miracle Fireball Muffler - Honda - Civic Type R FD2R
$1,123.00 $1,066.85
5zigen Pro Racer Headers - Honda - Civic FD2
$1,100.00 $1,045.00
5zigen Pro Racer Headers - Honda - Civic Type R FD2R
$1,100.00 $1,045.00
5zigen Pro Racer Headers - Honda - S2000 AP1/AP2
$1,331.00 $1,277.76
5zigen SP Spec Tune Exhaust system - Nissan - GT-R R35
$2,293.00 $2,201.28