2010

{"id":6267193098422,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Jimny JB23W (1998-2018)","handle":"recaro-japan-base-frame-seat-rail-standard-right-suzuki-jimny-jb23w-1998-2018-2088-015-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(Middle position of 3 position baseframe with ST-JJ)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.This baseframe is changed the form from July 13, 2011.\u003cbr\u003e- There is interference between seat backrest and door armrest. IS-84 LX(Including JP ERGOMED series),LS,LT 10mm. old Orthopad(till 2010 Oct)= 10mm. Later than 2010 Nov old Orthopad= 10mm. Style-J,JJ,JC,D,DC= 15mm.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Jimny - JB23W (1998-2018) K6A\u003c!--split--\u003e","published_at":"2021-02-16T20:52:25+08:00","created_at":"2021-02-16T20:52:26+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","jimny-jb23w-1998-2018-tc-k6a-i3","jp1","recaro-japan","right","seat-rails","suzuki","ws10"],"price":22400,"price_min":22400,"price_max":22400,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38045014851766,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2088.015.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Jimny JB23W (1998-2018)","public_title":null,"options":["Default Title"],"price":22400,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-jimny-jb23w-1998-2018-rzcrew.jpg?v=1710326896"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-jimny-jb23w-1998-2018-rzcrew.jpg?v=1710326896","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Jimny JB23W (1998-2018) - 2088.015.2 - Rzcrewgarage","id":22850257453238,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-jimny-jb23w-1998-2018-rzcrew.jpg?v=1710326896"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-jimny-jb23w-1998-2018-rzcrew.jpg?v=1710326896","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(Middle position of 3 position baseframe with ST-JJ)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.This baseframe is changed the form from July 13, 2011.\u003cbr\u003e- There is interference between seat backrest and door armrest. IS-84 LX(Including JP ERGOMED series),LS,LT 10mm. old Orthopad(till 2010 Oct)= 10mm. Later than 2010 Nov old Orthopad= 10mm. Style-J,JJ,JC,D,DC= 15mm.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Jimny - JB23W (1998-2018) K6A\u003c!--split--\u003e"}

{"id":6267193131190,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Jimny Sierra JB43W (2002-2018)","handle":"recaro-japan-base-frame-seat-rail-standard-right-suzuki-jimny-sierra-jb43w-2002-2018-2088-015-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(Middle position of 3 position baseframe with ST-JJ)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.This baseframe is changed the form from July 13, 2011.\u003cbr\u003e- There is interference between seat backrest and door armrest. IS-84 LX(Including JP ERGOMED series),LS,LT 10mm. old Orthopad(till 2010 Oct)= 10mm. Later than 2010 Nov old Orthopad= 10mm. Style-J,JJ,JC,D,DC= 15mm.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Jimny Sierra - JB43W (2002-2018) M13A\u003c!--split--\u003e","published_at":"2021-02-16T20:52:27+08:00","created_at":"2021-02-16T20:52:27+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","jimny-sierra-jb43w-2002-2018-na-m13a-i4","jp1","recaro-japan","right","seat-rails","suzuki","ws10"],"price":22400,"price_min":22400,"price_max":22400,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38045014884534,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2088.015.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Jimny Sierra JB43W (2002-2018)","public_title":null,"options":["Default Title"],"price":22400,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-jimny-sierra-jb43w-2002-2018-rzcrew.jpg?v=1710326896"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-jimny-sierra-jb43w-2002-2018-rzcrew.jpg?v=1710326896","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Jimny Sierra JB43W (2002-2018) - 2088.015.2 - Rzcrewgarage","id":22850257649846,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-jimny-sierra-jb43w-2002-2018-rzcrew.jpg?v=1710326896"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-jimny-sierra-jb43w-2002-2018-rzcrew.jpg?v=1710326896","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(Middle position of 3 position baseframe with ST-JJ)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.This baseframe is changed the form from July 13, 2011.\u003cbr\u003e- There is interference between seat backrest and door armrest. IS-84 LX(Including JP ERGOMED series),LS,LT 10mm. old Orthopad(till 2010 Oct)= 10mm. Later than 2010 Nov old Orthopad= 10mm. Style-J,JJ,JC,D,DC= 15mm.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Jimny Sierra - JB43W (2002-2018) M13A\u003c!--split--\u003e"}

{"id":6267194278070,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Swift Sport ZC31S (2005-2019)","handle":"recaro-japan-base-frame-seat-rail-standard-right-suzuki-swift-sport-zc31s-2005-2019-2088-544-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(Middle position of 3 position baseframe with ST-JJ) 4mm to door from OEM seat.The length of slider is 15mm longer than OEM seat on front side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.2WD. 4WD. Attached a side airbag canceller.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Swift Sport - ZC31S (2007-2009) M16A\u003cbr\u003eSuzuki - Swift Sport - ZC31S (2009-2019) M16A\u003cbr\u003eSuzuki - Swift Sport - ZC31S (2005-2007) M16A\u003c!--split--\u003e","published_at":"2021-02-16T20:52:57+08:00","created_at":"2021-02-16T20:52:58+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","2019","jp1","recaro-japan","right","seat-rails","suzuki","swift-sport-zc31s-2004-2010-na-m16a-i4","ws10"],"price":22400,"price_min":22400,"price_max":22400,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38045015900342,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2088.544.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Swift Sport ZC31S (2005-2019)","public_title":null,"options":["Default Title"],"price":22400,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-swift-sport-zc31s-2005-2019-rzcrew.jpg?v=1710326883"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-swift-sport-zc31s-2005-2019-rzcrew.jpg?v=1710326883","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Swift Sport ZC31S (2005-2019) - 2088.544.2 - Rzcrewgarage","id":22850260861110,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-swift-sport-zc31s-2005-2019-rzcrew.jpg?v=1710326883"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-swift-sport-zc31s-2005-2019-rzcrew.jpg?v=1710326883","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(Middle position of 3 position baseframe with ST-JJ) 4mm to door from OEM seat.The length of slider is 15mm longer than OEM seat on front side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.2WD. 4WD. Attached a side airbag canceller.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Swift Sport - ZC31S (2007-2009) M16A\u003cbr\u003eSuzuki - Swift Sport - ZC31S (2009-2019) M16A\u003cbr\u003eSuzuki - Swift Sport - ZC31S (2005-2007) M16A\u003c!--split--\u003e"}

{"id":6267194081462,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Swift ZC72S\/ZD72S (2009-2021)","handle":"recaro-japan-base-frame-seat-rail-standard-right-suzuki-swift-zc72s-zd72s-2009-2021-2088-543-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position:5mm higher than lowest position of OEM seat.(Middle position of 3 position baseframe with ST-JJ)（(A case of Style-JJ,the spacer use 19mm.)5mm to door from OEM seat.The length of slider is 20mm shorter than OEM seat on front side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. Swift Sport Manual car（In the case of CVT, please refer to the page of the ZC \/ ZD72) For non-side airbag car only. 2WD only. . If your car has the Optional center console,RECARO Armrest cannot be installed Accessories and the navigation unit are unconfirmed.\u003cbr\u003e- Only manual shift car of SWIFT SPORT is confirmed. Other cars:there is interference betwenn shif lever and seat cushion. RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Swift - ZC72S (2013-2018) K12B\u003cbr\u003eSuzuki - Swift - ZC72S (2009-2013) K12B\u003cbr\u003eSuzuki - Swift - ZD72S (2014-2021) K12B\u003c!--split--\u003e","published_at":"2021-02-16T20:52:53+08:00","created_at":"2021-02-16T20:52:53+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","2019","2020","2021","jp1","recaro-japan","right","seat-rails","suzuki","swift-zc72s-2010-2018-na-k12b-i4","swift-zd72s-2014-2021-na-k12b-i4","ws10"],"price":22400,"price_min":22400,"price_max":22400,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38045015736502,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2088.543.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Swift ZC72S\/ZD72S (2009-2021)","public_title":null,"options":["Default Title"],"price":22400,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-swift-zc72szd72s-2009-2021-rzcrew.jpg?v=1710326885"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-swift-zc72szd72s-2009-2021-rzcrew.jpg?v=1710326885","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Swift ZC72S\/ZD72S (2009-2021) - 2088.543.2 - Rzcrewgarage","id":22850260336822,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-swift-zc72szd72s-2009-2021-rzcrew.jpg?v=1710326885"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-swift-zc72szd72s-2009-2021-rzcrew.jpg?v=1710326885","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position:5mm higher than lowest position of OEM seat.(Middle position of 3 position baseframe with ST-JJ)（(A case of Style-JJ,the spacer use 19mm.)5mm to door from OEM seat.The length of slider is 20mm shorter than OEM seat on front side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. Swift Sport Manual car（In the case of CVT, please refer to the page of the ZC \/ ZD72) For non-side airbag car only. 2WD only. . If your car has the Optional center console,RECARO Armrest cannot be installed Accessories and the navigation unit are unconfirmed.\u003cbr\u003e- Only manual shift car of SWIFT SPORT is confirmed. Other cars:there is interference betwenn shif lever and seat cushion. RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Swift - ZC72S (2013-2018) K12B\u003cbr\u003eSuzuki - Swift - ZC72S (2009-2013) K12B\u003cbr\u003eSuzuki - Swift - ZD72S (2014-2021) K12B\u003c!--split--\u003e"}

{"id":7442479055030,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Blade AZE154H\/AZE156H\/GRE156H (2006-2018)","handle":"recaro-japan-base-frame-seat-rail-standard-right-toyota-blade-aze154h-aze156h-gre156h-2006-2018-2080-527-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator. (Middle position of 3 position baseframe with ST-JJ.Seat position:23mm higher than lowest position of OEM seat.(Middle position of 3 position baseframe with ST-JJ)10mm to door from OEM seat.The length of slider is 40mm shorter than OEM seat on front side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.Attached a side airbag canceller. Including PHV car. Accessories and the navigation unit are unconfirmed.\u003cbr\u003e- CS,CT,C-classic CSE= the sitting position will be higher because of spacers usage.RS\/TS-# series need RS\/TS-G offset adapter(PN 1700001J）.1700001J is adjustable offset (5mm\/10mm\/15mm).RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Blade - AZE154H (2006-2018) 2AZ-FE\u003cbr\u003eToyota - Blade - AZE156H (2006-2018) 2AZ-FE\u003cbr\u003eToyota - Blade - GRE156H (2008-2018) 2GR-FE\u003c!--split--\u003e","published_at":"2022-08-23T18:21:38+08:00","created_at":"2022-08-23T18:11:20+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","blade-aze154h-2006-2018-na-2az-fe-i4","blade-aze156h-2006-2018-na-2az-fe-i4","blade-gre156h-2008-2018-na-2gr-fe-v6","jp1","recaro-japan","right","seat-rails","toyota","ws10"],"price":22400,"price_min":22400,"price_max":22400,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":41726137761974,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2080.527.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Blade AZE154H\/AZE156H\/GRE156H (2006-2018)","public_title":null,"options":["Default Title"],"price":22400,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-blade-aze154haze156hgre156h-2006-2018-rzcrew.jpg?v=1710320096"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-blade-aze154haze156hgre156h-2006-2018-rzcrew.jpg?v=1710320096","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Blade AZE154H\/AZE156H\/GRE156H (2006-2018) - 2080.527.2 - Rzcrewgarage","id":24895581978806,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-blade-aze154haze156hgre156h-2006-2018-rzcrew.jpg?v=1710320096"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-blade-aze154haze156hgre156h-2006-2018-rzcrew.jpg?v=1710320096","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator. (Middle position of 3 position baseframe with ST-JJ.Seat position:23mm higher than lowest position of OEM seat.(Middle position of 3 position baseframe with ST-JJ)10mm to door from OEM seat.The length of slider is 40mm shorter than OEM seat on front side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.Attached a side airbag canceller. Including PHV car. Accessories and the navigation unit are unconfirmed.\u003cbr\u003e- CS,CT,C-classic CSE= the sitting position will be higher because of spacers usage.RS\/TS-# series need RS\/TS-G offset adapter(PN 1700001J）.1700001J is adjustable offset (5mm\/10mm\/15mm).RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Blade - AZE154H (2006-2018) 2AZ-FE\u003cbr\u003eToyota - Blade - AZE156H (2006-2018) 2AZ-FE\u003cbr\u003eToyota - Blade - GRE156H (2008-2018) 2GR-FE\u003c!--split--\u003e"}

{"id":7442480955574,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Corolla Rumion NZE151N\/ZRE152N\/ZRE154N (2007-2018)","handle":"recaro-japan-base-frame-seat-rail-standard-right-toyota-corolla-rumion-nze151n-zre152n-zre154n-2007-2018-2080-842-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator. Please use airbag canceller.Seat position: height is same as lowermost OEM seat. (Middle position of 3 position of rail with ST-JJ)The length of slider is 20mm shorter than OEM seat on front side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.Attached a side airbag canceller.\u003cbr\u003e- CS,CT,C-classic CSE= the sitting position will be higher because of spacers usage.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Corolla Rumion - NZE151N (2007-2018) 1NZ-FE\u003cbr\u003eToyota - Corolla Rumion - ZRE152N (2007-2018) 2ZR-FE\u003cbr\u003eToyota - Corolla Rumion - ZRE154N (2007-2018) 2ZR-FE\u003c!--split--\u003e","published_at":"2022-08-23T18:21:44+08:00","created_at":"2022-08-23T18:13:21+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","corolla-lumion-zre152n-2007-2018-na-2zr-fe-i4","corolla-rumion-nze151n-2007-2018-na-1nz-fe-i4","corolla-rumion-zre154n-2007-2018-na-2zr-fe-i4","jp1","recaro-japan","right","seat-rails","toyota","ws10"],"price":22400,"price_min":22400,"price_max":22400,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":41726142447798,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2080.842.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Corolla Rumion NZE151N\/ZRE152N\/ZRE154N (2007-2018)","public_title":null,"options":["Default Title"],"price":22400,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-corolla-rumion-nze151nzre152nzre154n-2007-2018-rzcrew.jpg?v=1710320071"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-corolla-rumion-nze151nzre152nzre154n-2007-2018-rzcrew.jpg?v=1710320071","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Corolla Rumion NZE151N\/ZRE152N\/ZRE154N (2007-2018) - 2080.842.2 - Rzcrewgarage","id":24895593087158,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-corolla-rumion-nze151nzre152nzre154n-2007-2018-rzcrew.jpg?v=1710320071"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-corolla-rumion-nze151nzre152nzre154n-2007-2018-rzcrew.jpg?v=1710320071","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator. Please use airbag canceller.Seat position: height is same as lowermost OEM seat. (Middle position of 3 position of rail with ST-JJ)The length of slider is 20mm shorter than OEM seat on front side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.Attached a side airbag canceller.\u003cbr\u003e- CS,CT,C-classic CSE= the sitting position will be higher because of spacers usage.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Corolla Rumion - NZE151N (2007-2018) 1NZ-FE\u003cbr\u003eToyota - Corolla Rumion - ZRE152N (2007-2018) 2ZR-FE\u003cbr\u003eToyota - Corolla Rumion - ZRE154N (2007-2018) 2ZR-FE\u003c!--split--\u003e"}

{"id":7442478268598,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Crown GRS180\/GRS184\/GRS200\/GRS202\/GRS204 (2003-2019)","handle":"recaro-japan-base-frame-seat-rail-standard-right-toyota-crown-grs180-grs184-grs200-grs202-grs204-2003-2019-2080-415-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator. Please use airbag canceller.Seat position:10mm lower than lowest position of OEM seat.(Middle position of 3 position baseframe with ST-JJ)5mm to door from OEM seat. There is a bit interference between slide lever and floor console on the front position.Function of seat position sensor loses.Function of seat belt reminder loses on passenger seat. (Warning lights of the seat belt will not light.)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.Attached a side airbag canceller. 2WD.\u003cbr\u003e- D,DS,DSE,CSEwill experierence some interference with seat cushion side and center console. RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- D \/ DH \/ DV\u003cbr\u003e- DS \/ DSH \/ DSV \/ ES-V \/ DSE\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Crown - GRS180 (2005-2008) 4GR-FSE\u003cbr\u003eToyota - Crown - GRS180 (2003-2005) 4GR-FSE\u003cbr\u003eToyota - Crown - GRS184 (2005-2008) 2GR-FSE\u003cbr\u003eToyota - Crown - GRS184 (2003-2005) 2GR-FSE\u003cbr\u003eToyota - Crown - GRS200 (2008-2019) 4GR-FSE\u003cbr\u003eToyota - Crown - GRS202 (2008-2019) 3GR-FSE\u003cbr\u003eToyota - Crown - GRS204 (2008-2019) 2GR-FSE\u003c!--split--\u003e","published_at":"2022-08-23T18:21:48+08:00","created_at":"2022-08-23T18:10:21+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","2019","crown-grs180-2003-2008-na-4gr-fse-v6","crown-grs184-2005-2008-na-2gr-fse-v6","crown-grs200-2008-2019-na-4gr-fse-v6","crown-grs202-2008-2019-na-3gr-fse-v6","crown-grs204-2008-2019-na-2gr-fse-v6","jp1","recaro-japan","right","seat-rails","toyota","ws10"],"price":22400,"price_min":22400,"price_max":22400,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":41726136582326,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2080.415.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Crown GRS180\/GRS184\/GRS200\/GRS202\/GRS204 (2003-2019)","public_title":null,"options":["Default Title"],"price":22400,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-crown-grs180grs184grs200grs202grs204-2003-2019-rzcrew.jpg?v=1710320108"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-crown-grs180grs184grs200grs202grs204-2003-2019-rzcrew.jpg?v=1710320108","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Crown GRS180\/GRS184\/GRS200\/GRS202\/GRS204 (2003-2019) - 2080.415.2 - Rzcrewgarage","id":24895577620662,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-crown-grs180grs184grs200grs202grs204-2003-2019-rzcrew.jpg?v=1710320108"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-crown-grs180grs184grs200grs202grs204-2003-2019-rzcrew.jpg?v=1710320108","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator. Please use airbag canceller.Seat position:10mm lower than lowest position of OEM seat.(Middle position of 3 position baseframe with ST-JJ)5mm to door from OEM seat. There is a bit interference between slide lever and floor console on the front position.Function of seat position sensor loses.Function of seat belt reminder loses on passenger seat. (Warning lights of the seat belt will not light.)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.Attached a side airbag canceller. 2WD.\u003cbr\u003e- D,DS,DSE,CSEwill experierence some interference with seat cushion side and center console. RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- D \/ DH \/ DV\u003cbr\u003e- DS \/ DSH \/ DSV \/ ES-V \/ DSE\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Crown - GRS180 (2005-2008) 4GR-FSE\u003cbr\u003eToyota - Crown - GRS180 (2003-2005) 4GR-FSE\u003cbr\u003eToyota - Crown - GRS184 (2005-2008) 2GR-FSE\u003cbr\u003eToyota - Crown - GRS184 (2003-2005) 2GR-FSE\u003cbr\u003eToyota - Crown - GRS200 (2008-2019) 4GR-FSE\u003cbr\u003eToyota - Crown - GRS202 (2008-2019) 3GR-FSE\u003cbr\u003eToyota - Crown - GRS204 (2008-2019) 2GR-FSE\u003c!--split--\u003e"}

{"id":7442480496822,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Land Cruiser Prado GDJ150W\/GDJ151W\/GRJ150W\/GRJ151W\/TRJ150\/TRJ150W (2009-2021)","handle":"recaro-japan-base-frame-seat-rail-standard-right-toyota-land-cruiser-prado-gdj150w-gdj151w-grj150w-grj151w-trj150-trj150w-2009-2021-2080-628-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator. Please use airbag canceller. Seat position: same as lowest position of OEM seat.(Middle position of 3 position baseframe with ST-JJ) The length of slider is 20mm shorter than OEM seat on rear side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.Attached a side airbag canceller. Precrash safty system car cannot be installed. Cold climate area specification and Optional equipment car is unconfirmed\u003cbr\u003e- SP-# needs SP-G offset adapter (PN 1600094J）.CS,CSE,CT,C-classicuses spacer therefore seat position will be higher.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Land Cruiser Prado - GDJ150W (2015-2021) 1GD-FTV\u003cbr\u003eToyota - Land Cruiser Prado - GDJ151W (2015-2021) 1GD-FTV\u003cbr\u003eToyota - Land Cruiser Prado - GRJ150W (2009-2015) 1GR-FE\u003cbr\u003eToyota - Land Cruiser Prado - GRJ151W (2009-2015) 1GR-FE\u003cbr\u003eToyota - Land Cruiser Prado - TRJ150 (2009-2016) 2TR-FE\u003cbr\u003eToyota - Land Cruiser Prado - TRJ150W (2009-2017) 2TR-FE\u003c!--split--\u003e","published_at":"2022-08-23T18:22:31+08:00","created_at":"2022-08-23T18:12:47+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","2019","2020","2021","jp1","land-cruiser-prado-gdj150w-2015-2021-tc-1gd-ftv-v6","land-cruiser-prado-gdj151w-2015-2021-tc-1gd-ftv-v6","land-cruiser-prado-grj150w-2009-2015-na-1gr-fe-v6","land-cruiser-prado-grj151w-2009-2015-na-1gr-fe-v6","land-cruiser-prado-trj150-2009-2017-na-2tr-fe-i4","land-cruiser-prado-trj150w-2009-2017-na-2tr-fe-i4","recaro-japan","right","seat-rails","toyota","ws10"],"price":22400,"price_min":22400,"price_max":22400,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":41726141890742,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2080.628.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Land Cruiser Prado GDJ150W\/GDJ151W\/GRJ150W\/GRJ151W\/TRJ150\/TRJ150W (2009-2021)","public_title":null,"options":["Default Title"],"price":22400,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-land-cruiser-prado-gdj150wgdj151wgrj150wgrj151wtrj150trj150w-2009-2021-rzcrew.jpg?v=1710320082"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-land-cruiser-prado-gdj150wgdj151wgrj150wgrj151wtrj150trj150w-2009-2021-rzcrew.jpg?v=1710320082","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Land Cruiser Prado GDJ150W\/GDJ151W\/GRJ150W\/GRJ151W\/TRJ150\/TRJ150W (2009-2021) - 2080.628.2 - Rzcrewgarage","id":24895590400182,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-land-cruiser-prado-gdj150wgdj151wgrj150wgrj151wtrj150trj150w-2009-2021-rzcrew.jpg?v=1710320082"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-land-cruiser-prado-gdj150wgdj151wgrj150wgrj151wtrj150trj150w-2009-2021-rzcrew.jpg?v=1710320082","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator. Please use airbag canceller. Seat position: same as lowest position of OEM seat.(Middle position of 3 position baseframe with ST-JJ) The length of slider is 20mm shorter than OEM seat on rear side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.Attached a side airbag canceller. Precrash safty system car cannot be installed. Cold climate area specification and Optional equipment car is unconfirmed\u003cbr\u003e- SP-# needs SP-G offset adapter (PN 1600094J）.CS,CSE,CT,C-classicuses spacer therefore seat position will be higher.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Land Cruiser Prado - GDJ150W (2015-2021) 1GD-FTV\u003cbr\u003eToyota - Land Cruiser Prado - GDJ151W (2015-2021) 1GD-FTV\u003cbr\u003eToyota - Land Cruiser Prado - GRJ150W (2009-2015) 1GR-FE\u003cbr\u003eToyota - Land Cruiser Prado - GRJ151W (2009-2015) 1GR-FE\u003cbr\u003eToyota - Land Cruiser Prado - TRJ150 (2009-2016) 2TR-FE\u003cbr\u003eToyota - Land Cruiser Prado - TRJ150W (2009-2017) 2TR-FE\u003c!--split--\u003e"}

{"id":7442480398518,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Land Cruiser URJ202W\/UZJ200W (2007-2018)","handle":"recaro-japan-base-frame-seat-rail-standard-right-toyota-land-cruiser-urj202w-uzj200w-2007-2018-2080-627-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator. Please use airbag canceller. Seat position: height is same as OEM seat. (Middle position of 3 position baseframe with ST-JJ)The length of slider is 20mm shorter than OEM seat on front side. drivers side seat position sensor requires relocation.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.Attached a side airbag canceller. Pre-crash Safety System is not allowed to install.Cold climate area specification and Optional equipment car is unconfirmed\u003cbr\u003e- CS,CT,C-classic CSE= the sitting position will be higher because of spacers usage.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Land Cruiser - URJ202W (2009-2015) 1UR-FE\u003cbr\u003eToyota - Land Cruiser - URJ202W (2015-2018) 1UR-FE\u003cbr\u003eToyota - Land Cruiser - UZJ200W (2007-2009) 2UZ-FE\u003c!--split--\u003e","published_at":"2022-08-23T18:22:07+08:00","created_at":"2022-08-23T18:12:41+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","jp1","land-cruiser-urj202w-2009-2018-na-1ur-fe-v8","land-cruiser-uzj200w-2007-2018-na-2uz-fe-v8","recaro-japan","right","seat-rails","toyota","ws10"],"price":22400,"price_min":22400,"price_max":22400,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":41726141268150,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2080.627.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Land Cruiser URJ202W\/UZJ200W (2007-2018)","public_title":null,"options":["Default Title"],"price":22400,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-land-cruiser-urj202wuzj200w-2007-2018-rzcrew.jpg?v=1710320082"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-land-cruiser-urj202wuzj200w-2007-2018-rzcrew.jpg?v=1710320082","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Land Cruiser URJ202W\/UZJ200W (2007-2018) - 2080.627.2 - Rzcrewgarage","id":24895589908662,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-land-cruiser-urj202wuzj200w-2007-2018-rzcrew.jpg?v=1710320082"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-land-cruiser-urj202wuzj200w-2007-2018-rzcrew.jpg?v=1710320082","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator. Please use airbag canceller. Seat position: height is same as OEM seat. (Middle position of 3 position baseframe with ST-JJ)The length of slider is 20mm shorter than OEM seat on front side. drivers side seat position sensor requires relocation.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.Attached a side airbag canceller. Pre-crash Safety System is not allowed to install.Cold climate area specification and Optional equipment car is unconfirmed\u003cbr\u003e- CS,CT,C-classic CSE= the sitting position will be higher because of spacers usage.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Land Cruiser - URJ202W (2009-2015) 1UR-FE\u003cbr\u003eToyota - Land Cruiser - URJ202W (2015-2018) 1UR-FE\u003cbr\u003eToyota - Land Cruiser - UZJ200W (2007-2009) 2UZ-FE\u003c!--split--\u003e"}

{"id":7442480988342,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Mark X Zio ANA10\/ANA15\/GGA10 (2007-2018)","handle":"recaro-japan-base-frame-seat-rail-standard-right-toyota-mark-x-zio-ana10-ana15-gga10-2007-2018-2080-842-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator. Please use airbag canceller.Seat position: height is same as lowermost OEM seat. (Middle position of 3 position of rail with ST-JJ)The length of slider is 20mm shorter than OEM seat on front side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.Attached a side airbag canceller.\u003cbr\u003e- CS,CT,C-classic CSE= the sitting position will be higher because of spacers usage.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Mark X Zio - ANA10 (2007-2018) 2AZ-FE\u003cbr\u003eToyota - Mark X Zio - ANA15 (2007-2018) 2AZ-FE\u003cbr\u003eToyota - Mark X Zio - GGA10 (2007-2018) 22GR-FE\u003c!--split--\u003e","published_at":"2022-08-23T18:22:11+08:00","created_at":"2022-08-23T18:13:23+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","jp1","mark-x-zio-ana10-2007-2018-na-2az-fe-i4","mark-x-zio-ana15-2007-2018-na-2az-fe-i4","mark-x-zio-gga10-2007-2018-na-2gr-fe-v6","recaro-japan","right","seat-rails","toyota","ws10"],"price":22400,"price_min":22400,"price_max":22400,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":41726142480566,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2080.842.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Mark X Zio ANA10\/ANA15\/GGA10 (2007-2018)","public_title":null,"options":["Default Title"],"price":22400,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-mark-x-zio-ana10ana15gga10-2007-2018-rzcrew.jpg?v=1710320071"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-mark-x-zio-ana10ana15gga10-2007-2018-rzcrew.jpg?v=1710320071","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Mark X Zio ANA10\/ANA15\/GGA10 (2007-2018) - 2080.842.2 - Rzcrewgarage","id":24895593185462,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-mark-x-zio-ana10ana15gga10-2007-2018-rzcrew.jpg?v=1710320071"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-mark-x-zio-ana10ana15gga10-2007-2018-rzcrew.jpg?v=1710320071","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator. Please use airbag canceller.Seat position: height is same as lowermost OEM seat. (Middle position of 3 position of rail with ST-JJ)The length of slider is 20mm shorter than OEM seat on front side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.Attached a side airbag canceller.\u003cbr\u003e- CS,CT,C-classic CSE= the sitting position will be higher because of spacers usage.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Mark X Zio - ANA10 (2007-2018) 2AZ-FE\u003cbr\u003eToyota - Mark X Zio - ANA15 (2007-2018) 2AZ-FE\u003cbr\u003eToyota - Mark X Zio - GGA10 (2007-2018) 22GR-FE\u003c!--split--\u003e"}

{"id":7442480693430,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Ractis NCP100\/NCP105\/SCP100 (2005-2018)","handle":"recaro-japan-base-frame-seat-rail-standard-right-toyota-ractis-ncp100-ncp105-scp100-2005-2018-2080-743-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(Middle position of 3 position baseframe with ST-JJ) The length of slider is 20mm shorter than OEM seat on rear side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. For right side seat only..(driver side) For non-side airbag car only. 4WD(Left sade seat is unconfirmed.)Cold climate area specificationand Optional equipment car is unconfirmed\u003cbr\u003e- Trend-J,JJ,JC,D,DCfor back rest side and Doorarm resta couple mm. interfere.CS,CSEuses spacer therefore seat position will be higher.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Ractis - NCP100 (2005-2018) 1NZ-FE\u003cbr\u003eToyota - Ractis - NCP105 (2005-2018) 1NZ-FE\u003cbr\u003eToyota - Ractis - SCP100 (2005-2018) 2SZ-FE\u003c!--split--\u003e","published_at":"2022-08-23T18:22:15+08:00","created_at":"2022-08-23T18:13:09+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","jp1","ractis-ncp100-2005-2018-na-1nz-fe-i4","ractis-ncp105-2005-2018-na-1nz-fe-i4","ractis-scp100-2005-2018-na-2sz-fe-i4","recaro-japan","right","seat-rails","toyota","ws10"],"price":22400,"price_min":22400,"price_max":22400,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":41726142087350,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2080.743.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Ractis NCP100\/NCP105\/SCP100 (2005-2018)","public_title":null,"options":["Default Title"],"price":22400,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-ractis-ncp100ncp105scp100-2005-2018-rzcrew.jpg?v=1710320073"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-ractis-ncp100ncp105scp100-2005-2018-rzcrew.jpg?v=1710320073","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Ractis NCP100\/NCP105\/SCP100 (2005-2018) - 2080.743.2 - Rzcrewgarage","id":24895591186614,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-ractis-ncp100ncp105scp100-2005-2018-rzcrew.jpg?v=1710320073"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-ractis-ncp100ncp105scp100-2005-2018-rzcrew.jpg?v=1710320073","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(Middle position of 3 position baseframe with ST-JJ) The length of slider is 20mm shorter than OEM seat on rear side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. For right side seat only..(driver side) For non-side airbag car only. 4WD(Left sade seat is unconfirmed.)Cold climate area specificationand Optional equipment car is unconfirmed\u003cbr\u003e- Trend-J,JJ,JC,D,DCfor back rest side and Doorarm resta couple mm. interfere.CS,CSEuses spacer therefore seat position will be higher.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Ractis - NCP100 (2005-2018) 1NZ-FE\u003cbr\u003eToyota - Ractis - NCP105 (2005-2018) 1NZ-FE\u003cbr\u003eToyota - Ractis - SCP100 (2005-2018) 2SZ-FE\u003c!--split--\u003e"}

{"id":7442477187254,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota RAV4 ACA31W\/ACA36W (2005-2018)","handle":"recaro-japan-base-frame-seat-rail-standard-right-toyota-rav4-aca31w-aca36w-2005-2018-2080-253-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(Middle position of 3 position baseframe with ST-JJ) The length of slider is 20mm shorter than OEM seat on front side. drivers side seat position sensor requires relocation. .\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.For non-side airbag car only.Cold climate area specificationand Optional equipment car is unconfirmed\u003cbr\u003e- CS,CT,C-classic CSE= the sitting position will be higher because of spacers usage.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - RAV4 - ACA31W (2006-2018) 2AZ-FE\u003cbr\u003eToyota - RAV4 - ACA36W (2005-2018) 2AZ-FE\u003c!--split--\u003e","published_at":"2022-08-23T18:22:16+08:00","created_at":"2022-08-23T18:09:15+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","jp1","rav4-aca31w-2006-2018-na-2az-fe-i4","rav4-aca36w-2005-2018-na-2az-fe-i4","recaro-japan","right","seat-rails","toyota","ws10"],"price":22400,"price_min":22400,"price_max":22400,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":41726133928118,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2080.253.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota RAV4 ACA31W\/ACA36W (2005-2018)","public_title":null,"options":["Default Title"],"price":22400,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-rav4-aca31waca36w-2005-2018-rzcrew.jpg?v=1710320120"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-rav4-aca31waca36w-2005-2018-rzcrew.jpg?v=1710320120","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota RAV4 ACA31W\/ACA36W (2005-2018) - 2080.253.2 - Rzcrewgarage","id":24895572017334,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-rav4-aca31waca36w-2005-2018-rzcrew.jpg?v=1710320120"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-rav4-aca31waca36w-2005-2018-rzcrew.jpg?v=1710320120","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(Middle position of 3 position baseframe with ST-JJ) The length of slider is 20mm shorter than OEM seat on front side. drivers side seat position sensor requires relocation. .\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.For non-side airbag car only.Cold climate area specificationand Optional equipment car is unconfirmed\u003cbr\u003e- CS,CT,C-classic CSE= the sitting position will be higher because of spacers usage.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - RAV4 - ACA31W (2006-2018) 2AZ-FE\u003cbr\u003eToyota - RAV4 - ACA36W (2005-2018) 2AZ-FE\u003c!--split--\u003e"}

{"id":8093105455286,"title":"Recaro Japan - RMS exclusive frame - Nissan GT-R R35","handle":"recaro-japan-rms-exclusive-frame-nissan-gt-r-r35","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003eReference Number: 2081.007.2\/ 2081.008.1\u003cbr\u003e\u003cbr\u003ePosition: \u003cbr\u003e(Note) This product cannot be installed on any seats other than those listed in the matching information below. Ultra low position frame. RMS exclusive frame, driver's seat frame (right seat). Install using the exclusive side adapter included with the base frame. Side airbag canceller included.\u003cbr\u003eNotes and Remarks:\u003cbr\u003eNew structure frame. One-position type.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe side airbag function built into the stock seat will be lost. The airbag warning light must be turned off. The seating position of the RMS can be lowered by approximately 14mm to a maximum of 55mm by adjusting the hole position of the dedicated side adapter. The steering wheel offset is center.\u003cbr\u003e\u003cbr\u003e Seat Fitting:\u003cbr\u003e RMS2600A \/ 2700G\tYou need to prepare the side adapter separately.\u003cbr\u003e\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eGT-R | R35 Zenki | 2007-2010 | TT | VR38DETT | V6,GT-R | R35 Chuki | 2010-2016 | TT | VR38DETT | V6,GT-R | R35 Kouki | 2016-2018 | TT | VR38DETT | V6\u003c!--split--\u003e","published_at":"2024-10-16T09:46:25+08:00","created_at":"2024-10-16T09:45:07+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","gt-r-r35-chuki-2010-2016-tt-vr38dett-v6","gt-r-r35-kouki-2016-2018-tt-vr38dett-v6","gt-r-r35-zenki-2007-2010-tt-vr38dett-v6","jp1","nissan","R35","recaro-japan","seat-rails","ws12"],"price":24200,"price_min":24200,"price_max":24200,"available":true,"price_varies":false,"compare_at_price":23700,"compare_at_price_min":23700,"compare_at_price_max":23700,"compare_at_price_varies":false,"variants":[{"id":43542830579894,"title":"Right","option1":"Right","option2":null,"option3":null,"sku":"2081.007.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - RMS exclusive frame - Nissan GT-R R35 - Right","public_title":"Right","options":["Right"],"price":24200,"weight":17000,"compare_at_price":23700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43542830612662,"title":"Left","option1":"Left","option2":null,"option3":null,"sku":"2081.008.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - RMS exclusive frame - Nissan GT-R R35 - Left","public_title":"Left","options":["Left"],"price":24200,"weight":17000,"compare_at_price":23700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/Recaro_seat_rail_f3dfde26-2e43-4a73-b1c4-702226a2bdff.jpg?v=1729043107"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Recaro_seat_rail_f3dfde26-2e43-4a73-b1c4-702226a2bdff.jpg?v=1729043107","options":["Side"],"media":[{"alt":"Recaro Japan - RMS exclusive frame - Nissan GT-R R35","id":28652031377590,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Recaro_seat_rail_f3dfde26-2e43-4a73-b1c4-702226a2bdff.jpg?v=1729043107"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Recaro_seat_rail_f3dfde26-2e43-4a73-b1c4-702226a2bdff.jpg?v=1729043107","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003eReference Number: 2081.007.2\/ 2081.008.1\u003cbr\u003e\u003cbr\u003ePosition: \u003cbr\u003e(Note) This product cannot be installed on any seats other than those listed in the matching information below. Ultra low position frame. RMS exclusive frame, driver's seat frame (right seat). Install using the exclusive side adapter included with the base frame. Side airbag canceller included.\u003cbr\u003eNotes and Remarks:\u003cbr\u003eNew structure frame. One-position type.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe side airbag function built into the stock seat will be lost. The airbag warning light must be turned off. The seating position of the RMS can be lowered by approximately 14mm to a maximum of 55mm by adjusting the hole position of the dedicated side adapter. The steering wheel offset is center.\u003cbr\u003e\u003cbr\u003e Seat Fitting:\u003cbr\u003e RMS2600A \/ 2700G\tYou need to prepare the side adapter separately.\u003cbr\u003e\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eGT-R | R35 Zenki | 2007-2010 | TT | VR38DETT | V6,GT-R | R35 Chuki | 2010-2016 | TT | VR38DETT | V6,GT-R | R35 Kouki | 2016-2018 | TT | VR38DETT | V6\u003c!--split--\u003e"}

{"id":2095459106913,"title":"RRP Racing service Middle Temp Thermostat (75 Deg C) Suzuki Swift Sport ZC32S","handle":"rrp-racing-service-middle-temp-thermostat-75-deg-c-suzuki-swift-sport-zc32s-e32-300a","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RRP Racing service\u003cbr\u003ePart Number: E32-300A\u003cbr\u003eOpening temperature: 75 Deg C\u003cbr\u003e\u003cbr\u003eSwift's temperature control is very severe. Earls decided to sell middle temp thermostats from many test results such as supercharger and super ECU. \nIt turned out that there are many cases where the performance of the engine has not been fully achieved with the conventional low temperature thermostat (the one at about 65 degrees). When using a low-temp thermostat, the temperature was too low during driving, leading to power down and fuel consumption down, and I sometimes felt that the power and response were bad although I did not know what it was. If the water temperature drops below 80 degrees, the computer may misunderstand that the engine is cold and the operation of variable valve and electronic throttle etc. may become worse and the engine performance may be suppressed.\u003cbr\u003e\u003cbr\u003e\n\n\nThe engine performance will go down without knowing it. However, it is better to lower the water temperature properly as much as possible, so I thought about the middle temp thermostat. \nBy using this thermostat, it is possible to always keep the temperature from 80 degrees to 95 degrees at which the performance of the engine can be obtained the most, and you can use it with confidence. \nPlease try it!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC32S | 2010-2017 | NA | M16A | I4\u003c!--split--\u003eSwift Sport | ZC32S | 2010-2017 | NA | M16A | I4\u003cbr\u003e","published_at":"2019-04-26T16:22:37+08:00","created_at":"2019-04-26T16:22:38+08:00","vendor":"RRP Racing service","type":"Thermostats","tags":["2010","2011","2012","2013","2014","2015","2016","2017","cooling","jp1","rrp-racing-service","suzuki","swift-sport-zc32s-2010-2017-na-m16a-i4","thermostats","ws118"],"price":5900,"price_min":5900,"price_max":5900,"available":true,"price_varies":false,"compare_at_price":5900,"compare_at_price_min":5900,"compare_at_price_max":5900,"compare_at_price_varies":false,"variants":[{"id":19755695341665,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"E32-300A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"RRP Racing service Middle Temp Thermostat (75 Deg C) Suzuki Swift Sport ZC32S","public_title":null,"options":["Default Title"],"price":5900,"weight":500,"compare_at_price":5900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/E32-300A_7476ec8a-dadc-48a2-834e-856dd659d08f.jpg?v=1710179450"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/E32-300A_7476ec8a-dadc-48a2-834e-856dd659d08f.jpg?v=1710179450","options":["Title"],"media":[{"alt":"RRP Racing service - Middle Temp Thermostat (75 Deg C) - Suzuki - Swift Sport ZC32S - E32-300A - RZCREWGARAGE","id":26388492517558,"position":1,"preview_image":{"aspect_ratio":1.333,"height":450,"width":600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/E32-300A_7476ec8a-dadc-48a2-834e-856dd659d08f.jpg?v=1710179450"},"aspect_ratio":1.333,"height":450,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/E32-300A_7476ec8a-dadc-48a2-834e-856dd659d08f.jpg?v=1710179450","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RRP Racing service\u003cbr\u003ePart Number: E32-300A\u003cbr\u003eOpening temperature: 75 Deg C\u003cbr\u003e\u003cbr\u003eSwift's temperature control is very severe. Earls decided to sell middle temp thermostats from many test results such as supercharger and super ECU. \nIt turned out that there are many cases where the performance of the engine has not been fully achieved with the conventional low temperature thermostat (the one at about 65 degrees). When using a low-temp thermostat, the temperature was too low during driving, leading to power down and fuel consumption down, and I sometimes felt that the power and response were bad although I did not know what it was. If the water temperature drops below 80 degrees, the computer may misunderstand that the engine is cold and the operation of variable valve and electronic throttle etc. may become worse and the engine performance may be suppressed.\u003cbr\u003e\u003cbr\u003e\n\n\nThe engine performance will go down without knowing it. However, it is better to lower the water temperature properly as much as possible, so I thought about the middle temp thermostat. \nBy using this thermostat, it is possible to always keep the temperature from 80 degrees to 95 degrees at which the performance of the engine can be obtained the most, and you can use it with confidence. \nPlease try it!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC32S | 2010-2017 | NA | M16A | I4\u003c!--split--\u003eSwift Sport | ZC32S | 2010-2017 | NA | M16A | I4\u003cbr\u003e"}

{"id":2095458943073,"title":"RRP Racing service Silicon Hoses Kit Suzuki Swift Sport ZC32S","handle":"rrp-racing-service-silicon-hoses-kit-suzuki-swift-sport-zc32s-e32-301","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RRP Racing service\u003cbr\u003ePart Number: E32-301\u003cbr\u003eHose Type: Water Hoses\u003cbr\u003e\u003cbr\u003eRRP Blue Silicon hose kit for the new ZC32S, Upgrade your hoses now with this superios quality kit! Please refer to the picture.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC32S | 2010-2017 | NA | M16A | I4\u003c!--split--\u003e","published_at":"2019-04-26T16:22:34+08:00","created_at":"2019-04-26T16:22:35+08:00","vendor":"RRP Racing service","type":"Cooling Hoses","tags":["2010","2011","2012","2013","2014","2015","2016","2017","cooling","cooling-hoses","coolinghoses","jp1","rrp-racing-service","suzuki","swift-sport-zc32s-2010-2017-na-m16a-i4","ws16"],"price":16600,"price_min":16600,"price_max":16600,"available":true,"price_varies":false,"compare_at_price":16600,"compare_at_price_min":16600,"compare_at_price_max":16600,"compare_at_price_varies":false,"variants":[{"id":19755694653537,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"E32-301","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"RRP Racing service Silicon Hoses Kit Suzuki Swift Sport ZC32S","public_title":null,"options":["Default Title"],"price":16600,"weight":3000,"compare_at_price":16600,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/E32-301.jpg?v=1688962512"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/E32-301.jpg?v=1688962512","options":["Title"],"media":[{"alt":"RRP Racing service - Silicon Hoses Kit - Suzuki - Swift Sport ZC32S - E32-301 - RZCREWGARAGE","id":26388492452022,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/E32-301.jpg?v=1688962512"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/E32-301.jpg?v=1688962512","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RRP Racing service\u003cbr\u003ePart Number: E32-301\u003cbr\u003eHose Type: Water Hoses\u003cbr\u003e\u003cbr\u003eRRP Blue Silicon hose kit for the new ZC32S, Upgrade your hoses now with this superios quality kit! Please refer to the picture.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC32S | 2010-2017 | NA | M16A | I4\u003c!--split--\u003e"}

{"id":1451464654945,"title":"RRP Racing service - 57.5mm Throttle Body - Suzuki - Swift Sport ZC32S","handle":"rrp-racing-service-57-5mm-throttle-body-zc32s-e32-221n","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RRP Racing service\u003cbr\u003eReference Number: E32-221N\u003cbr\u003eThrottle Body Diameter: 57.5mm\u003cbr\u003e\u003cbr\u003eRRP Big Throttle Kit pulls out the maximum engine performance with a large diameter of throttle with more than 10% bigger than normal throttle which enable to output the power and inhales the resistance, and also will perform the response up your engine and pedal work. Decreasing the intake resistance performs more engine power and throttle response with the best processing technology made. This product is a necessary item for power up your engine from beginners to race-drivers with best processing technology targeting the best run of Swift car. You can feel the difference of engine feelings you've never experienced.\u003cbr\u003e\u003cbr\u003eSpecification:\u003cbr\u003eThrottle body opening (mm): 55mm to 57.5mm\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC32S | 2010-2017 | NA | M16A | I4\u003c!--split--\u003e","published_at":"2018-11-12T18:19:05+08:00","created_at":"2018-11-12T18:19:06+08:00","vendor":"RRP Racing service","type":"Throttle Bodies","tags":["2010","2011","2012","2013","2014","2015","2016","2017","intake","jp1","rrp-racing-service","suzuki","swift-sport-zc32s-2010-2017-na-m16a-i4","throttle-bodies","ws110"],"price":161100,"price_min":161100,"price_max":161100,"available":true,"price_varies":false,"compare_at_price":161100,"compare_at_price_min":161100,"compare_at_price_max":161100,"compare_at_price_varies":false,"variants":[{"id":12484796612705,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"E32-221N","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"RRP Racing service - 57.5mm Throttle Body - Suzuki - Swift Sport ZC32S","public_title":null,"options":["Default Title"],"price":161100,"weight":1200,"compare_at_price":161100,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/E32-221N_e1a0bfc3-3a34-4c29-a224-614acd629030.jpg?v=1710168342"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/E32-221N_e1a0bfc3-3a34-4c29-a224-614acd629030.jpg?v=1710168342","options":["Title"],"media":[{"alt":"RRP Racing service - 57.5mm Throttle Body - ZC32S - E32-221N","id":25545275736246,"position":1,"preview_image":{"aspect_ratio":1.333,"height":450,"width":600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/E32-221N_e1a0bfc3-3a34-4c29-a224-614acd629030.jpg?v=1710168342"},"aspect_ratio":1.333,"height":450,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/E32-221N_e1a0bfc3-3a34-4c29-a224-614acd629030.jpg?v=1710168342","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RRP Racing service\u003cbr\u003eReference Number: E32-221N\u003cbr\u003eThrottle Body Diameter: 57.5mm\u003cbr\u003e\u003cbr\u003eRRP Big Throttle Kit pulls out the maximum engine performance with a large diameter of throttle with more than 10% bigger than normal throttle which enable to output the power and inhales the resistance, and also will perform the response up your engine and pedal work. Decreasing the intake resistance performs more engine power and throttle response with the best processing technology made. This product is a necessary item for power up your engine from beginners to race-drivers with best processing technology targeting the best run of Swift car. You can feel the difference of engine feelings you've never experienced.\u003cbr\u003e\u003cbr\u003eSpecification:\u003cbr\u003eThrottle body opening (mm): 55mm to 57.5mm\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC32S | 2010-2017 | NA | M16A | I4\u003c!--split--\u003e"}

{"id":4021128888417,"title":"RRP Racing service - Lightweight Flywheel - Suzuki - Swift Sport ZC32S","handle":"rrp-racing-service-lightweight-flywheel-suzuki-swift-sport-zc32s-d-114g","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RRP Racing service\u003cbr\u003eWeight: 4.5kg\u003cbr\u003e\u003cbr\u003eLightweight flywheels increase throttle response and aide in overall vehicle performance. Whilst retaining the strength and durability of the OEM part. Chromoly construction. Developed to find the best balance by Bench testing, Street and Circuit.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC32S | 2010-2017 | NA | M16A | I4\u003c!--split--\u003e","published_at":"2019-09-02T16:08:04+08:00","created_at":"2019-09-02T16:08:04+08:00","vendor":"RRP Racing service","type":"Flywheels","tags":["2010","2011","2012","2013","2014","2015","2016","2017","4.5","flywheels","jp1","rrp-racing-service","suzuki","swift-sport-zc32s-2010-2017-na-m16a-i4","ws112"],"price":42900,"price_min":42900,"price_max":42900,"available":true,"price_varies":false,"compare_at_price":47000,"compare_at_price_min":47000,"compare_at_price_max":47000,"compare_at_price_varies":false,"variants":[{"id":29853866524769,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"D-114G","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"RRP Racing service - Lightweight Flywheel - Suzuki - Swift Sport ZC32S","public_title":null,"options":["Default Title"],"price":42900,"weight":5500,"compare_at_price":47000,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/D-114G_6bbbc688-670b-408c-accd-1f76cfa743af.jpg?v=1710189209"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/D-114G_6bbbc688-670b-408c-accd-1f76cfa743af.jpg?v=1710189209","options":["Title"],"media":[{"alt":"RRP Racing service - Lightweight Flywheel - Suzuki - Swift Sport ZC32S - D-114G - Rzcrewgarage","id":25423247147190,"position":1,"preview_image":{"aspect_ratio":1.333,"height":450,"width":600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/D-114G_6bbbc688-670b-408c-accd-1f76cfa743af.jpg?v=1710189209"},"aspect_ratio":1.333,"height":450,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/D-114G_6bbbc688-670b-408c-accd-1f76cfa743af.jpg?v=1710189209","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RRP Racing service\u003cbr\u003eWeight: 4.5kg\u003cbr\u003e\u003cbr\u003eLightweight flywheels increase throttle response and aide in overall vehicle performance. Whilst retaining the strength and durability of the OEM part. Chromoly construction. Developed to find the best balance by Bench testing, Street and Circuit.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC32S | 2010-2017 | NA | M16A | I4\u003c!--split--\u003e"}

{"id":1449615097953,"title":"Rzcrew Garage - 2\" Super Circuit Decat Pipe - Honda - CR-Z ZF1\/ZF2","handle":"rzcrew-garage-2-super-circuit-decat-pipe-honda-cr-z-zf1-zf2-zf1-zf2-cp-hcrz-s008","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Garage\u003cbr\u003eReference Number: CP-HCRZ-S008\u003cbr\u003eExhaust Type: Decat Pipe\u003cbr\u003eMaterial Used: Stainless Steel\u003cbr\u003e\u003cbr\u003eRzcrew Garage Super Circuit decat pipe are custom build to order with a perfect finish. Steadily hand crafted, this model features a 2\" pipe diameter for maximum flow and better response.All decat pipes are precision hand Tig\/Argon welded and fully 304 stainless steel mandrel bent built for a longer life span.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003cbr\u003eCR-Z | ZF2 | 2012-2018 | H | LEA | I4\u003c!--split--\u003e","published_at":"2018-11-07T18:21:59+08:00","created_at":"2018-11-07T18:22:01+08:00","vendor":"Rzcrew Garage","type":"Catbacks - Exhaust Manifolds","tags":["2010","2011","2012","2013","2014","2015","2016","2017","2018","catbacks-exhaust-manifolds","cr-z-zf1-2010-2012-h-lea-i4","cr-z-zf2-2012-2018-h-lea-i4","decat-pipe","exhaust","H Performance","honda","rzcrew-garage","rzcrew-garage25","sg1","stainless-steel","ws120","ZF1\/ZF2"],"price":30500,"price_min":30500,"price_max":30500,"available":true,"price_varies":false,"compare_at_price":29900,"compare_at_price_min":29900,"compare_at_price_max":29900,"compare_at_price_varies":false,"variants":[{"id":12475582087265,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CP-HCRZ-S008","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Garage - 2\" Super Circuit Decat Pipe - Honda - CR-Z ZF1\/ZF2","public_title":null,"options":["Default Title"],"price":30500,"weight":4000,"compare_at_price":29900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/CP-HCRZ-S008_257e83cb-c899-4f27-a505-49884d555027.jpg?v=1710168256"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/CP-HCRZ-S008_257e83cb-c899-4f27-a505-49884d555027.jpg?v=1710168256","options":["Title"],"media":[{"alt":"Rzcrew Garage - 2\" Super Circuit Decat Pipe - Honda - CR-Z ZF1\/ZF2 - ZF1\/ZF2 - CP-HCRZ-S008","id":25881999343798,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/CP-HCRZ-S008_257e83cb-c899-4f27-a505-49884d555027.jpg?v=1710168256"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/CP-HCRZ-S008_257e83cb-c899-4f27-a505-49884d555027.jpg?v=1710168256","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Garage\u003cbr\u003eReference Number: CP-HCRZ-S008\u003cbr\u003eExhaust Type: Decat Pipe\u003cbr\u003eMaterial Used: Stainless Steel\u003cbr\u003e\u003cbr\u003eRzcrew Garage Super Circuit decat pipe are custom build to order with a perfect finish. Steadily hand crafted, this model features a 2\" pipe diameter for maximum flow and better response.All decat pipes are precision hand Tig\/Argon welded and fully 304 stainless steel mandrel bent built for a longer life span.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003cbr\u003eCR-Z | ZF2 | 2012-2018 | H | LEA | I4\u003c!--split--\u003e"}

{"id":1904229220449,"title":"Rzcrew Garage - 2-1 Super Circuit Header - Honda - CR-Z ZF1\/ZF2","handle":"rzcrew-garage-2-1-super-circuit-header-honda-cr-z-zf1-zf2-zf1-zf2-ex-hdcrz-s001","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Garage\u003cbr\u003eReference Number: EX-HDCRZ-S001\u003cbr\u003eExhaust Type: Header\u003cbr\u003eMaterial Used: Stainless Steel\u003cbr\u003e\u003cbr\u003eRzcrew Garage Super Circuit exhaust header are custom build to order with a perfect finish. Steadily hand crafted, this model features a Tuned length 2-1 with 2.0\" secondary and 2.5\"pipes formation for better low-end torque without sacrificing higher end horsepower.All headers are precision hand Tig\/Argon welded and fully 304 stainless steel mandrel bent built for a longer life span.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003cbr\u003eCR-Z | ZF2 | 2012-2018 | H | LEA | I4\u003c!--split--\u003e","published_at":"2018-11-22T19:51:16+08:00","created_at":"2018-11-22T19:51:16+08:00","vendor":"Rzcrew Garage","type":"Catbacks - Exhaust Manifolds","tags":["2010","2011","2012","2013","2014","2015","2016","2017","2018","catbacks-exhaust-manifolds","cr-z-zf1-2010-2012-h-lea-i4","cr-z-zf2-2012-2018-h-lea-i4","exhaust","H Performance","header","honda","rzcrew-garage","rzcrew-garage25","sg1","stainless-steel","ws120","ZF1\/ZF2"],"price":45700,"price_min":45700,"price_max":45700,"available":true,"price_varies":false,"compare_at_price":48900,"compare_at_price_min":48900,"compare_at_price_max":48900,"compare_at_price_varies":false,"variants":[{"id":18151261241441,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"EX-HDCRZ-S001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Garage - 2-1 Super Circuit Header - Honda - CR-Z ZF1\/ZF2","public_title":null,"options":["Default Title"],"price":45700,"weight":8000,"compare_at_price":48900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/EX-HDCRZ-S001_655d07f1-050d-40b9-90c8-54adea21dad7.jpg?v=1710168466"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/EX-HDCRZ-S001_655d07f1-050d-40b9-90c8-54adea21dad7.jpg?v=1710168466","options":["Title"],"media":[{"alt":"Rzcrew Garage - 2-1 Super Circuit Header - Honda - CR-Z ZF1\/ZF2 - ZF1\/ZF2 - EX-HDCRZ-S001","id":25881962217654,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/EX-HDCRZ-S001_655d07f1-050d-40b9-90c8-54adea21dad7.jpg?v=1710168466"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/EX-HDCRZ-S001_655d07f1-050d-40b9-90c8-54adea21dad7.jpg?v=1710168466","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Garage\u003cbr\u003eReference Number: EX-HDCRZ-S001\u003cbr\u003eExhaust Type: Header\u003cbr\u003eMaterial Used: Stainless Steel\u003cbr\u003e\u003cbr\u003eRzcrew Garage Super Circuit exhaust header are custom build to order with a perfect finish. Steadily hand crafted, this model features a Tuned length 2-1 with 2.0\" secondary and 2.5\"pipes formation for better low-end torque without sacrificing higher end horsepower.All headers are precision hand Tig\/Argon welded and fully 304 stainless steel mandrel bent built for a longer life span.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003cbr\u003eCR-Z | ZF2 | 2012-2018 | H | LEA | I4\u003c!--split--\u003e"}

{"id":1449615294561,"title":"Rzcrew Garage - 2pcs Super Circuit Decat Pipe - Nissan - GT-R R35","handle":"rzcrew-garage-2pcs-super-circuit-decat-pipe-nissan-gt-r-r35-r35-cp-gtr35-s008","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Garage\u003cbr\u003eReference Number: CP-GTR35-S008\u003cbr\u003eExhaust Type: Decat Pipe\u003cbr\u003eMaterial Used: Stainless Steel\u003cbr\u003e\u003cbr\u003eRzcrew Garage Super Circuit decat pipe are custom build to order with a perfect finish. Steadily hand crafted, this model features a 2pcs pipe diameter for maximum flow and better response.All decat pipes are precision hand Tig\/Argon welded and fully 304 stainless steel mandrel bent built for a longer life span.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eGT-R | R35 Zenki | 2007-2010 | TT | VR38DETT | V6\u003cbr\u003eGT-R | R35 Chuki | 2010-2016 | TT | VR38DETT | V6\u003cbr\u003eGT-R | R35 Kouki | 2016-2018 | TT | VR38DETT | V6\u003c!--split--\u003e","published_at":"2018-11-07T18:22:11+08:00","created_at":"2018-11-07T18:22:12+08:00","vendor":"Rzcrew Garage","type":"Catbacks - Exhaust Manifolds","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","catbacks-exhaust-manifolds","decat-pipe","exhaust","gt-r-r35-chuki-2010-2016-tt-vr38dett-v6","gt-r-r35-kouki-2016-2018-tt-vr38dett-v6","gt-r-r35-zenki-2007-2010-tt-vr38dett-v6","H Performance","nissan","R35","rzcrew-garage","rzcrew-garage25","sg1","stainless-steel","ws120"],"price":85700,"price_min":85700,"price_max":85700,"available":true,"price_varies":false,"compare_at_price":98700,"compare_at_price_min":98700,"compare_at_price_max":98700,"compare_at_price_varies":false,"variants":[{"id":12475582283873,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CP-GTR35-S008","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Garage - 2pcs Super Circuit Decat Pipe - Nissan - GT-R R35","public_title":null,"options":["Default Title"],"price":85700,"weight":12000,"compare_at_price":98700,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/CP-GTR35-S008_df08a15d-38f3-4eea-8b8c-cb278d44dbe5.jpg?v=1710168265"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/CP-GTR35-S008_df08a15d-38f3-4eea-8b8c-cb278d44dbe5.jpg?v=1710168265","options":["Title"],"media":[{"alt":"Rzcrew Garage - 2pcs Super Circuit Decat Pipe - Nissan - GT-R R35 - R35 - CP-GTR35-S008","id":25882004684982,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/CP-GTR35-S008_df08a15d-38f3-4eea-8b8c-cb278d44dbe5.jpg?v=1710168265"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/CP-GTR35-S008_df08a15d-38f3-4eea-8b8c-cb278d44dbe5.jpg?v=1710168265","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Garage\u003cbr\u003eReference Number: CP-GTR35-S008\u003cbr\u003eExhaust Type: Decat Pipe\u003cbr\u003eMaterial Used: Stainless Steel\u003cbr\u003e\u003cbr\u003eRzcrew Garage Super Circuit decat pipe are custom build to order with a perfect finish. Steadily hand crafted, this model features a 2pcs pipe diameter for maximum flow and better response.All decat pipes are precision hand Tig\/Argon welded and fully 304 stainless steel mandrel bent built for a longer life span.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eGT-R | R35 Zenki | 2007-2010 | TT | VR38DETT | V6\u003cbr\u003eGT-R | R35 Chuki | 2010-2016 | TT | VR38DETT | V6\u003cbr\u003eGT-R | R35 Kouki | 2016-2018 | TT | VR38DETT | V6\u003c!--split--\u003e"}

{"id":1449613721697,"title":"Rzcrew Garage - 4-2-1 (4B12 2400cc Only) Super Circuit Header - Mitsubishi - Lancer GT CY4A","handle":"rzcrew-garage-4-2-1-4b12-2400cc-only-super-circuit-header-mitsubishi-lancer-gt-cy4a-cy4a-ex-mlen24-s010","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Garage\u003cbr\u003eReference Number: EX-MLEN24-S010\u003cbr\u003eExhaust Type: Header\u003cbr\u003eMaterial Used: Stainless Steel\u003cbr\u003e\u003cbr\u003eRzcrew Garage Super Circuit exhaust header are custom build to order with a perfect finish. Steadily hand crafted, this model features a Tuned length 4-2-1 (4B12 2400cc Only) pipes formation for better low-end torque without sacrificing higher end horsepower.All headers are precision hand Tig\/Argon welded and fully 304 stainless steel mandrel bent built for a longer life span.\u003cbr\u003ePlease note during choosing your header please fill up the menu option with the necessary information\u003cbr\u003e1- Does your exhaust have 3 or 4 bolts on the heat shield?\u003cbr\u003e\u003ccenter\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/thumbnail_nGdlICIYh5h42HU4.png?v=1675990652\" width=\"500\"\u003e\u003c\/center\u003e\u003cbr\u003e\u003cbr\u003e\u003ccenter\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/thumbnail_xnLWbq2x0byFMVBj.png?v=1675990652\" width=\"500\"\u003e\u003c\/center\u003e\u003cbr\u003e\u003cbr\u003e\n2- is it the FED type (no cat) or PZEV (there is a cat included)\u003cbr\u003e\u003ccenter\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/thumbnail_Oie4d1D6EADuSuhM.png?v=1675990857\" width=\"500\"\u003e\u003c\/center\u003e\u003cbr\u003e\u003cbr\u003e\n This header has been proven to increase 8.70HP and massive torque gain on a stock Engine.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eLancer GT | CY4A | 2007-2009 | NA | 4B11 | I4\u003cbr\u003eLancer GT | CY4A | 2009-2018 | NA | 4B11 | I4\u003cbr\u003eGalant Fortis | CY4A | 2007-2009 | NA | 4B11 | I4\u003cbr\u003eGalant Fortis | CY4A | 2009-2018 | NA | 4B11 | I4\u003c!--split--\u003e","published_at":"2023-02-10T11:02:47+08:00","created_at":"2018-11-07T18:20:44+08:00","vendor":"Rzcrew Garage","type":"Catbacks - Exhaust Manifolds","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","catbacks-exhaust-manifolds","CY4A","exhaust","galant-fortis-cy4a-2007-2009-na-4b11-i4","galant-fortis-cy4a-2009-2018-na-4b11-i4","H Performance","header","lancer-gt-cy4a-2007-2009-na-4b11-i4","lancer-gt-cy4a-2009-2018-na-4b11-i4","mitsubishi","rzcrew-garage","rzcrew-garage25","sg1","stainless-steel","ws120"],"price":59800,"price_min":59800,"price_max":59800,"available":true,"price_varies":false,"compare_at_price":66400,"compare_at_price_min":66400,"compare_at_price_max":66400,"compare_at_price_varies":false,"variants":[{"id":42098542608566,"title":"3 Bolts \/ FED type (no cat)","option1":"3 Bolts","option2":"FED type (no cat)","option3":null,"sku":"EX-MLEN24-S010","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Garage - 4-2-1 (4B12 2400cc Only) Super Circuit Header - Mitsubishi - Lancer GT CY4A - 3 Bolts \/ FED type (no cat)","public_title":"3 Bolts \/ FED type (no cat)","options":["3 Bolts","FED type (no cat)"],"price":59800,"weight":15000,"compare_at_price":66400,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42098542641334,"title":"3 Bolts \/ PZEV (there is a cat included)","option1":"3 Bolts","option2":"PZEV (there is a cat included)","option3":null,"sku":"EX-MLEN24-S010-3PZEV","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Garage - 4-2-1 (4B12 2400cc Only) Super Circuit Header - Mitsubishi - Lancer GT CY4A - 3 Bolts \/ PZEV (there is a cat included)","public_title":"3 Bolts \/ PZEV (there is a cat included)","options":["3 Bolts","PZEV (there is a cat included)"],"price":59800,"weight":15000,"compare_at_price":66400,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42098542674102,"title":"4 Bolts \/ FED type (no cat)","option1":"4 Bolts","option2":"FED type (no cat)","option3":null,"sku":"EX-MLEN24-S010-4FED","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Garage - 4-2-1 (4B12 2400cc Only) Super Circuit Header - Mitsubishi - Lancer GT CY4A - 4 Bolts \/ FED type (no cat)","public_title":"4 Bolts \/ FED type (no cat)","options":["4 Bolts","FED type (no cat)"],"price":59800,"weight":15000,"compare_at_price":66400,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42098542706870,"title":"4 Bolts \/ PZEV (there is a cat included)","option1":"4 Bolts","option2":"PZEV (there is a cat included)","option3":null,"sku":"EX-MLEN24-S010-4PZEV","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Garage - 4-2-1 (4B12 2400cc Only) Super Circuit Header - Mitsubishi - Lancer GT CY4A - 4 Bolts \/ PZEV (there is a cat included)","public_title":"4 Bolts \/ PZEV (there is a cat included)","options":["4 Bolts","PZEV (there is a cat included)"],"price":59800,"weight":15000,"compare_at_price":66400,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/EX-MLEN24-S010_e6d55872-3e69-41f7-a1de-2bffd8da29a3.jpg?v=1710168223","\/\/rzcrewgarage.com\/cdn\/shop\/products\/thumbnail_Oie4d1D6EADuSuhM_66dc670a-ac0a-4442-bde9-347382623d0b.png?v=1710168224","\/\/rzcrewgarage.com\/cdn\/shop\/products\/thumbnail_nGdlICIYh5h42HU4_d1207183-d2f4-4d77-814c-e55e805d96f1.png?v=1710168226","\/\/rzcrewgarage.com\/cdn\/shop\/products\/thumbnail_xnLWbq2x0byFMVBj_a5388126-a426-47b2-88ab-9aa2c5d2847c.png?v=1710168228"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/EX-MLEN24-S010_e6d55872-3e69-41f7-a1de-2bffd8da29a3.jpg?v=1710168223","options":["Heat shield Type","Cat Type"],"media":[{"alt":"Rzcrew Garage - 4-2-1 (4B12 2400cc Only) Super Circuit Header - Mitsubishi - Lancer GT CY4A - CY4A - EX-MLEN24-S010","id":25883300561078,"position":1,"preview_image":{"aspect_ratio":2.0,"height":350,"width":700,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/EX-MLEN24-S010_e6d55872-3e69-41f7-a1de-2bffd8da29a3.jpg?v=1710168223"},"aspect_ratio":2.0,"height":350,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/EX-MLEN24-S010_e6d55872-3e69-41f7-a1de-2bffd8da29a3.jpg?v=1710168223","width":700},{"alt":"Rzcrew Garage - 4-2-1 (4B12 2400cc Only) Super Circuit Header - Mitsubishi - Lancer GT CY4A - CY4A - EX-MLEN24-S010","id":25883300593846,"position":2,"preview_image":{"aspect_ratio":1.337,"height":415,"width":555,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/thumbnail_Oie4d1D6EADuSuhM_66dc670a-ac0a-4442-bde9-347382623d0b.png?v=1710168224"},"aspect_ratio":1.337,"height":415,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/thumbnail_Oie4d1D6EADuSuhM_66dc670a-ac0a-4442-bde9-347382623d0b.png?v=1710168224","width":555},{"alt":"Rzcrew Garage - 4-2-1 (4B12 2400cc Only) Super Circuit Header - Mitsubishi - Lancer GT CY4A - CY4A - EX-MLEN24-S010","id":25883300626614,"position":3,"preview_image":{"aspect_ratio":0.571,"height":329,"width":188,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/thumbnail_nGdlICIYh5h42HU4_d1207183-d2f4-4d77-814c-e55e805d96f1.png?v=1710168226"},"aspect_ratio":0.571,"height":329,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/thumbnail_nGdlICIYh5h42HU4_d1207183-d2f4-4d77-814c-e55e805d96f1.png?v=1710168226","width":188},{"alt":"Rzcrew Garage - 4-2-1 (4B12 2400cc Only) Super Circuit Header - Mitsubishi - Lancer GT CY4A - CY4A - EX-MLEN24-S010","id":25883300659382,"position":4,"preview_image":{"aspect_ratio":1.527,"height":328,"width":501,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/thumbnail_xnLWbq2x0byFMVBj_a5388126-a426-47b2-88ab-9aa2c5d2847c.png?v=1710168228"},"aspect_ratio":1.527,"height":328,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/thumbnail_xnLWbq2x0byFMVBj_a5388126-a426-47b2-88ab-9aa2c5d2847c.png?v=1710168228","width":501}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Garage\u003cbr\u003eReference Number: EX-MLEN24-S010\u003cbr\u003eExhaust Type: Header\u003cbr\u003eMaterial Used: Stainless Steel\u003cbr\u003e\u003cbr\u003eRzcrew Garage Super Circuit exhaust header are custom build to order with a perfect finish. Steadily hand crafted, this model features a Tuned length 4-2-1 (4B12 2400cc Only) pipes formation for better low-end torque without sacrificing higher end horsepower.All headers are precision hand Tig\/Argon welded and fully 304 stainless steel mandrel bent built for a longer life span.\u003cbr\u003ePlease note during choosing your header please fill up the menu option with the necessary information\u003cbr\u003e1- Does your exhaust have 3 or 4 bolts on the heat shield?\u003cbr\u003e\u003ccenter\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/thumbnail_nGdlICIYh5h42HU4.png?v=1675990652\" width=\"500\"\u003e\u003c\/center\u003e\u003cbr\u003e\u003cbr\u003e\u003ccenter\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/thumbnail_xnLWbq2x0byFMVBj.png?v=1675990652\" width=\"500\"\u003e\u003c\/center\u003e\u003cbr\u003e\u003cbr\u003e\n2- is it the FED type (no cat) or PZEV (there is a cat included)\u003cbr\u003e\u003ccenter\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/thumbnail_Oie4d1D6EADuSuhM.png?v=1675990857\" width=\"500\"\u003e\u003c\/center\u003e\u003cbr\u003e\u003cbr\u003e\n This header has been proven to increase 8.70HP and massive torque gain on a stock Engine.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eLancer GT | CY4A | 2007-2009 | NA | 4B11 | I4\u003cbr\u003eLancer GT | CY4A | 2009-2018 | NA | 4B11 | I4\u003cbr\u003eGalant Fortis | CY4A | 2007-2009 | NA | 4B11 | I4\u003cbr\u003eGalant Fortis | CY4A | 2009-2018 | NA | 4B11 | I4\u003c!--split--\u003e"}

{"id":1449613688929,"title":"Rzcrew Garage - 4-2-1 Super Circuit Header - Mitsubishi - Lancer GT CY4A","handle":"rzcrew-garage-4-2-1-super-circuit-header-mitsubishi-lancer-gt-cy4a-cy4a-ex-mlen20-s010","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Garage\u003cbr\u003eReference Number: EX-MLEN20-S010\u003cbr\u003eExhaust Type: Header\u003cbr\u003eMaterial Used: Stainless Steel\u003cbr\u003e\u003cbr\u003eRzcrew Garage Super Circuit exhaust header are custom build to order with a perfect finish. Steadily hand crafted, this model features a Tuned length 4-2-1 pipes formation for better low-end torque without sacrificing higher end horsepower.All headers are precision hand Tig\/Argon welded and fully 304 stainless steel mandrel bent built for a longer life span.\u003cbr\u003ePlease note during choosing your header please fill up the menu option with the necessary information\u003cbr\u003e1- Does your exhaust have 3 or 4 bolts on the heat shield?\u003cbr\u003e\u003ccenter\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/thumbnail_nGdlICIYh5h42HU4.png?v=1675990652\" width=\"500\"\u003e\u003c\/center\u003e\u003cbr\u003e\u003cbr\u003e\u003ccenter\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/thumbnail_xnLWbq2x0byFMVBj.png?v=1675990652\" width=\"500\"\u003e\u003c\/center\u003e\u003cbr\u003e\u003cbr\u003e\n2- is it the FED type (no cat) or PZEV (there is a cat included)\u003cbr\u003e\u003ccenter\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/thumbnail_Oie4d1D6EADuSuhM.png?v=1675990857\" width=\"500\"\u003e\u003c\/center\u003e\u003cbr\u003e\u003cbr\u003e\n This header has been proven to increase 8.70HP and massive torque gain on a stock Engine.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eLancer GT | CY4A | 2007-2009 | NA | 4B11 | I4\u003cbr\u003eLancer GT | CY4A | 2009-2018 | NA | 4B11 | I4\u003cbr\u003eGalant Fortis | CY4A | 2007-2009 | NA | 4B11 | I4\u003cbr\u003eGalant Fortis | CY4A | 2009-2018 | NA | 4B11 | I4\u003c!--split--\u003e","published_at":"2023-02-10T11:02:07+08:00","created_at":"2018-11-07T18:20:42+08:00","vendor":"Rzcrew Garage","type":"Catbacks - Exhaust Manifolds","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","catbacks-exhaust-manifolds","CY4A","exhaust","galant-fortis-cy4a-2007-2009-na-4b11-i4","galant-fortis-cy4a-2009-2018-na-4b11-i4","H Performance","header","lancer-gt-cy4a-2007-2009-na-4b11-i4","lancer-gt-cy4a-2009-2018-na-4b11-i4","mitsubishi","rzcrew-garage","rzcrew-garage25","sg1","stainless-steel","ws120"],"price":59800,"price_min":59800,"price_max":59800,"available":true,"price_varies":false,"compare_at_price":66400,"compare_at_price_min":66400,"compare_at_price_max":66400,"compare_at_price_varies":false,"variants":[{"id":42098542018742,"title":"3 Bolts \/ FED type (no cat)","option1":"3 Bolts","option2":"FED type (no cat)","option3":null,"sku":"EX-MLEN20-S010","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Garage - 4-2-1 Super Circuit Header - Mitsubishi - Lancer GT CY4A - 3 Bolts \/ FED type (no cat)","public_title":"3 Bolts \/ FED type (no cat)","options":["3 Bolts","FED type (no cat)"],"price":59800,"weight":15000,"compare_at_price":66400,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42098542051510,"title":"3 Bolts \/ PZEV (there is a cat included)","option1":"3 Bolts","option2":"PZEV (there is a cat included)","option3":null,"sku":"EX-MLEN20-S010-3PZEV","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Garage - 4-2-1 Super Circuit Header - Mitsubishi - Lancer GT CY4A - 3 Bolts \/ PZEV (there is a cat included)","public_title":"3 Bolts \/ PZEV (there is a cat included)","options":["3 Bolts","PZEV (there is a cat included)"],"price":59800,"weight":15000,"compare_at_price":66400,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42098542084278,"title":"4 Bolts \/ FED type (no cat)","option1":"4 Bolts","option2":"FED type (no cat)","option3":null,"sku":"EX-MLEN20-S010-4FED","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Garage - 4-2-1 Super Circuit Header - Mitsubishi - Lancer GT CY4A - 4 Bolts \/ FED type (no cat)","public_title":"4 Bolts \/ FED type (no cat)","options":["4 Bolts","FED type (no cat)"],"price":59800,"weight":15000,"compare_at_price":66400,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42098542117046,"title":"4 Bolts \/ PZEV (there is a cat included)","option1":"4 Bolts","option2":"PZEV (there is a cat included)","option3":null,"sku":"EX-MLEN20-S010-4PZEV","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Garage - 4-2-1 Super Circuit Header - Mitsubishi - Lancer GT CY4A - 4 Bolts \/ PZEV (there is a cat included)","public_title":"4 Bolts \/ PZEV (there is a cat included)","options":["4 Bolts","PZEV (there is a cat included)"],"price":59800,"weight":15000,"compare_at_price":66400,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/EX-MLEN20-S010_1d816bf9-90d9-4389-aebd-38e74048026b.jpg?v=1710168223","\/\/rzcrewgarage.com\/cdn\/shop\/products\/thumbnail_Oie4d1D6EADuSuhM.png?v=1710168225","\/\/rzcrewgarage.com\/cdn\/shop\/products\/thumbnail_nGdlICIYh5h42HU4.png?v=1710168226","\/\/rzcrewgarage.com\/cdn\/shop\/products\/thumbnail_xnLWbq2x0byFMVBj.png?v=1710168228"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/EX-MLEN20-S010_1d816bf9-90d9-4389-aebd-38e74048026b.jpg?v=1710168223","options":["Heat shield Type","Cat Type"],"media":[{"alt":"Rzcrew Garage - 4-2-1 Super Circuit Header - Mitsubishi - Lancer GT CY4A - CY4A - EX-MLEN20-S010","id":25883299152054,"position":1,"preview_image":{"aspect_ratio":2.0,"height":350,"width":700,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/EX-MLEN20-S010_1d816bf9-90d9-4389-aebd-38e74048026b.jpg?v=1710168223"},"aspect_ratio":2.0,"height":350,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/EX-MLEN20-S010_1d816bf9-90d9-4389-aebd-38e74048026b.jpg?v=1710168223","width":700},{"alt":"Rzcrew Garage - 4-2-1 Super Circuit Header - Mitsubishi - Lancer GT CY4A - CY4A - EX-MLEN20-S010","id":25883299184822,"position":2,"preview_image":{"aspect_ratio":1.337,"height":415,"width":555,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/thumbnail_Oie4d1D6EADuSuhM.png?v=1710168225"},"aspect_ratio":1.337,"height":415,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/thumbnail_Oie4d1D6EADuSuhM.png?v=1710168225","width":555},{"alt":"Rzcrew Garage - 4-2-1 Super Circuit Header - Mitsubishi - Lancer GT CY4A - CY4A - EX-MLEN20-S010","id":25883299217590,"position":3,"preview_image":{"aspect_ratio":0.571,"height":329,"width":188,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/thumbnail_nGdlICIYh5h42HU4.png?v=1710168226"},"aspect_ratio":0.571,"height":329,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/thumbnail_nGdlICIYh5h42HU4.png?v=1710168226","width":188},{"alt":"Rzcrew Garage - 4-2-1 Super Circuit Header - Mitsubishi - Lancer GT CY4A - CY4A - EX-MLEN20-S010","id":25883299250358,"position":4,"preview_image":{"aspect_ratio":1.527,"height":328,"width":501,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/thumbnail_xnLWbq2x0byFMVBj.png?v=1710168228"},"aspect_ratio":1.527,"height":328,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/thumbnail_xnLWbq2x0byFMVBj.png?v=1710168228","width":501}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Garage\u003cbr\u003eReference Number: EX-MLEN20-S010\u003cbr\u003eExhaust Type: Header\u003cbr\u003eMaterial Used: Stainless Steel\u003cbr\u003e\u003cbr\u003eRzcrew Garage Super Circuit exhaust header are custom build to order with a perfect finish. Steadily hand crafted, this model features a Tuned length 4-2-1 pipes formation for better low-end torque without sacrificing higher end horsepower.All headers are precision hand Tig\/Argon welded and fully 304 stainless steel mandrel bent built for a longer life span.\u003cbr\u003ePlease note during choosing your header please fill up the menu option with the necessary information\u003cbr\u003e1- Does your exhaust have 3 or 4 bolts on the heat shield?\u003cbr\u003e\u003ccenter\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/thumbnail_nGdlICIYh5h42HU4.png?v=1675990652\" width=\"500\"\u003e\u003c\/center\u003e\u003cbr\u003e\u003cbr\u003e\u003ccenter\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/thumbnail_xnLWbq2x0byFMVBj.png?v=1675990652\" width=\"500\"\u003e\u003c\/center\u003e\u003cbr\u003e\u003cbr\u003e\n2- is it the FED type (no cat) or PZEV (there is a cat included)\u003cbr\u003e\u003ccenter\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/files\/thumbnail_Oie4d1D6EADuSuhM.png?v=1675990857\" width=\"500\"\u003e\u003c\/center\u003e\u003cbr\u003e\u003cbr\u003e\n This header has been proven to increase 8.70HP and massive torque gain on a stock Engine.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eLancer GT | CY4A | 2007-2009 | NA | 4B11 | I4\u003cbr\u003eLancer GT | CY4A | 2009-2018 | NA | 4B11 | I4\u003cbr\u003eGalant Fortis | CY4A | 2007-2009 | NA | 4B11 | I4\u003cbr\u003eGalant Fortis | CY4A | 2009-2018 | NA | 4B11 | I4\u003c!--split--\u003e"}

{"id":1449613885537,"title":"Rzcrew Garage - 4-2-1 Super Circuit Header - Suzuki - Swift Sport ZC32S","handle":"rzcrew-garage-4-2-1-super-circuit-header-suzuki-swift-sport-zc32s-zc32s-ex-szswft16-s020","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Garage\u003cbr\u003eReference Number: EX-SZSWFT16-S020\u003cbr\u003eExhaust Type: Header\u003cbr\u003eMaterial Used: Stainless Steel\u003cbr\u003e\u003cbr\u003eRzcrew Garage Super Circuit exhaust header are custom build to order with a perfect finish. Steadily hand crafted, this model features a Tuned length 4-2-1 with 1.6\" primary, 2.0\" secondary and 2.5\"pipes formation for better low-end torque without sacrificing higher end horsepower.All headers are precision hand Tig\/Argon welded and fully 304 stainless steel mandrel bent built for a longer life span.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC32S | 2010-2017 | NA | M16A | I4\u003c!--split--\u003e","published_at":"2018-11-07T18:20:55+08:00","created_at":"2018-11-07T18:20:56+08:00","vendor":"Rzcrew Garage","type":"Catbacks - Exhaust Manifolds","tags":["2010","2011","2012","2013","2014","2015","2016","2017","catbacks-exhaust-manifolds","exhaust","H Performance","header","rzcrew-garage","rzcrew-garage25","sg1","stainless-steel","suzuki","swift-sport-zc32s-2010-2017-na-m16a-i4","ws120","ZC32S"],"price":75100,"price_min":75100,"price_max":75100,"available":true,"price_varies":false,"compare_at_price":85400,"compare_at_price_min":85400,"compare_at_price_max":85400,"compare_at_price_varies":false,"variants":[{"id":12475580874849,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"EX-SZSWFT16-S020","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Garage - 4-2-1 Super Circuit Header - Suzuki - Swift Sport ZC32S","public_title":null,"options":["Default Title"],"price":75100,"weight":23000,"compare_at_price":85400,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/EX-SZSWFT16-S020.jpg?v=1710168231"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/EX-SZSWFT16-S020.jpg?v=1710168231","options":["Title"],"media":[{"alt":"Rzcrew Garage - 4-2-1 Super Circuit Header - Suzuki - Swift Sport ZC32S - ZC32S - EX-SZSWFT16-S020","id":25881972244662,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/EX-SZSWFT16-S020.jpg?v=1710168231"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/EX-SZSWFT16-S020.jpg?v=1710168231","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Garage\u003cbr\u003eReference Number: EX-SZSWFT16-S020\u003cbr\u003eExhaust Type: Header\u003cbr\u003eMaterial Used: Stainless Steel\u003cbr\u003e\u003cbr\u003eRzcrew Garage Super Circuit exhaust header are custom build to order with a perfect finish. Steadily hand crafted, this model features a Tuned length 4-2-1 with 1.6\" primary, 2.0\" secondary and 2.5\"pipes formation for better low-end torque without sacrificing higher end horsepower.All headers are precision hand Tig\/Argon welded and fully 304 stainless steel mandrel bent built for a longer life span.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC32S | 2010-2017 | NA | M16A | I4\u003c!--split--\u003e"}

{"id":1449614082145,"title":"Rzcrew Garage - Custom Flange Super Circuit Turbo Manifold - Mitsubishi - Lancer Evolution X CZ4A","handle":"rzcrew-garage-custom-flange-super-circuit-turbo-manifold-mitsubishi-lancer-evolution-x-cz4a-cz4a-ex-mitevo10-s001","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Garage\u003cbr\u003eReference Number: EX-MITEVO10-S001\u003cbr\u003eExhaust Type: Turbo Manifold\u003cbr\u003eMaterial Used: Stainless Steel\u003cbr\u003e\u003cbr\u003eRzcrew Garage Super Circuit Turbo exhaust header are custom build to order with a perfect finish. Steadily hand crafted, this model features an Equal Tuned length Custom Flange for early spool and better response. By default this header comes to fit the stock turbo, if needed please advice us what flange you are using as we will customise the turbo flange to match your application.All headers are precision hand Tig\/Argon welded and fully 304 stainless steel mandrel bent built for a longer life span.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eLancer Evolution X | CZ4A Zenki (GSR Jdm\/MR) | 2007-2008 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Chuki (GSR Jdm\/MR) | 2008-2009 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Kouki (GSR Jdm\/MR) | 2009-2017 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Zenki (RS Jdm\/GSR) | 2007-2008 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Chuki (RS Jdm\/GSR) | 2008-2009 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Kouki (RS Jdm\/GSR) | 2009-2017 | TC | 4B11 | I4\u003c!--split--\u003e","published_at":"2018-11-07T18:21:06+08:00","created_at":"2018-11-07T18:21:08+08:00","vendor":"Rzcrew Garage","type":"Catbacks - Exhaust Manifolds","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","catbacks-exhaust-manifolds","CZ4A","exhaust","H Performance","lancer-evolution-x-cz4a-chuki-gsr-jdmmr-2008-2009-tc-4b11-i4","lancer-evolution-x-cz4a-chuki-rs-jdmgsr-2008-2009-tc-4b11-i4","lancer-evolution-x-cz4a-kouki-gsr-jdmmr-2009-2017-tc-4b11-i4","lancer-evolution-x-cz4a-kouki-rs-jdmgsr-2009-2017-tc-4b11-i4","lancer-evolution-x-cz4a-zenki-gsr-jdmmr-2007-2008-tc-4b11-i4","lancer-evolution-x-cz4a-zenki-rs-jdmgsr-2007-2008-tc-4b11-i4","mitsubishi","rzcrew-garage","rzcrew-garage25","sg1","stainless-steel","turbo-manifold","ws120"],"price":67400,"price_min":67400,"price_max":67400,"available":true,"price_varies":false,"compare_at_price":75900,"compare_at_price_min":75900,"compare_at_price_max":75900,"compare_at_price_varies":false,"variants":[{"id":12475581071457,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"EX-MITEVO10-S001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Garage - Custom Flange Super Circuit Turbo Manifold - Mitsubishi - Lancer Evolution X CZ4A","public_title":null,"options":["Default Title"],"price":67400,"weight":4000,"compare_at_price":75900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/EX-MITEVO10-S001_c155944f-a748-41ac-aa5c-b855dbda6a92.jpg?v=1710168233"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/EX-MITEVO10-S001_c155944f-a748-41ac-aa5c-b855dbda6a92.jpg?v=1710168233","options":["Title"],"media":[{"alt":"Rzcrew Garage - Custom Flange Super Circuit Turbo Manifold - Mitsubishi - Lancer Evolution X CZ4A - CZ4A - EX-MITEVO10-S001","id":25881974603958,"position":1,"preview_image":{"aspect_ratio":2.0,"height":175,"width":350,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/EX-MITEVO10-S001_c155944f-a748-41ac-aa5c-b855dbda6a92.jpg?v=1710168233"},"aspect_ratio":2.0,"height":175,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/EX-MITEVO10-S001_c155944f-a748-41ac-aa5c-b855dbda6a92.jpg?v=1710168233","width":350}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Garage\u003cbr\u003eReference Number: EX-MITEVO10-S001\u003cbr\u003eExhaust Type: Turbo Manifold\u003cbr\u003eMaterial Used: Stainless Steel\u003cbr\u003e\u003cbr\u003eRzcrew Garage Super Circuit Turbo exhaust header are custom build to order with a perfect finish. Steadily hand crafted, this model features an Equal Tuned length Custom Flange for early spool and better response. By default this header comes to fit the stock turbo, if needed please advice us what flange you are using as we will customise the turbo flange to match your application.All headers are precision hand Tig\/Argon welded and fully 304 stainless steel mandrel bent built for a longer life span.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eLancer Evolution X | CZ4A Zenki (GSR Jdm\/MR) | 2007-2008 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Chuki (GSR Jdm\/MR) | 2008-2009 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Kouki (GSR Jdm\/MR) | 2009-2017 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Zenki (RS Jdm\/GSR) | 2007-2008 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Chuki (RS Jdm\/GSR) | 2008-2009 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Kouki (RS Jdm\/GSR) | 2009-2017 | TC | 4B11 | I4\u003c!--split--\u003e"}