2012

{"id":6791103774902,"title":"HKS - Coilover Suspension Full Kit Hipermax S - Nissan Elgrand PE52\/PNE52\/TE52\/TNE52 (2010-2018)","handle":"hks-coilover-suspension-full-kit-hipermax-s-nissan-elgrand-pe52-pne52-te52-tne52-2010-2018-80300-an203","description":"SPECIFICATIONS:\u003cbr\u003eManufacturer: HKS\u003cbr\u003eAdjustability: Dampening and Height Adjustable\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003ePE52\u003cbr\u003eSeries: Hipermax S\u003cbr\u003eSpring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: 68(7)\u003cbr\u003e- Rear: 105(10.7)\u003cbr\u003eFree Height (mm):\u003cbr\u003e- Front: 220(Barrel)\u003cbr\u003e- Rear: Special\u003cbr\u003eRecommended Range to change Spring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: ±10 (1 )\u003cbr\u003e- Rear: N\/A\u003cbr\u003eDamper Force (Rebound\/Damping):\u003cbr\u003e- Front: 540\/604\u003cbr\u003e- Rear: 662\/368\u003cbr\u003e- Note: Damping force is at piston speed 0.1m\/sec.\u003cbr\u003eDefault position of Dial:\u003cbr\u003e- Front: 15\u003cbr\u003e- Rear: 15\u003cbr\u003eDamping Force Adjustment:\u003cbr\u003e- Front: 30 Steps\u003cbr\u003e- Rear: 30 Steps\u003cbr\u003eHeight Adjustable Lower Bracket:\u003cbr\u003e- Front: Yes\u003cbr\u003e- Rear: Yes\u003cbr\u003eUpper Mount:\u003cbr\u003e- Front: Rubber Bush\u003cbr\u003e- Rear: OEM\u003cbr\u003eDamper Layout:\u003cbr\u003e- Front: Inverted\u003cbr\u003e- Rear: Normal\u003cbr\u003eDamper\/Spring Layout:\u003cbr\u003e- Front: Coilover\u003cbr\u003e- Rear: Separate\u003cbr\u003eDamping force adjustable with Wire:\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: N\/A\u003cbr\u003eHelper Spring (Spring Rate N\/mm):\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: N\/A\u003cbr\u003eRide Height Specification -\u003cbr\u003e-Maximum Adjustable Range High - Low (mm):\u003cbr\u003e-- Front: -12 ～ -68\u003cbr\u003e-- Rear: -14 ～ -84\u003cbr\u003e-Drivable Range High - Low (mm):\u003cbr\u003e-- Front: -12 ～ -68\u003cbr\u003e-- Rear: -14 ～ -84\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- PE52: 2WD Highway Star 7 seater only\u003cbr\u003e- PNE52: 4WD Highway Star 7 seater only\u003cbr\u003e- TE52: 2WD Highway Star 7 seater only\u003cbr\u003e- TNE52: 4WD Highway Star 7 seater only\u003cbr\u003eThis set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV GT release this series has unified the many different street based Hipermax merits and further improved this new flagship series for the ultimate combination of driving performance and comfort performance, Driving Comfort. With exception of the circuit specific HIpermax IV SP series all other series will be replaced with this all-mighty spec. Specifically developed to provide the ultimate in harmony between performance handling and control with supreme ride comfort yet capable of high level performance on circuit as well. With massive adjustability in ride height and damper settings these items are an excellent choice for the daily driver to look and perform best under any kind of circumstance.\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual shape may differ.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - Elgrand - PE52 (2010-2018) VQ35DE\u003cbr\u003eNissan - Elgrand - PNE52 (2010-2018) VQ35DE\u003cbr\u003eNissan - Elgrand - TE52 (2010-2018) QR25DE\u003cbr\u003eNissan - Elgrand - TNE52 (2010-2018) QR25DE\u003c!--split--\u003e","published_at":"2021-06-15T18:21:33+08:00","created_at":"2021-06-15T18:21:34+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2010","2011","2012","2013","2014","2015","2016","2017","2018","254000x30y1z0","coilover-kits","coilovers-and-springs","CTA98","dampening-and-height-adjustable","elgrand-pe52-2010-2018-na-vq35de-v6","elgrand-pne52-2010-2018-na-vq35de-v6","elgrand-te52-2010-2018-na-qr25de-i4","elgrand-tne52-2010-2018-na-qr25de-i4","hks","JP1","nissan","ws122"],"price":203682,"price_min":203682,"price_max":203682,"available":true,"price_varies":false,"compare_at_price":245400,"compare_at_price_min":245400,"compare_at_price_max":245400,"compare_at_price_varies":false,"variants":[{"id":39940587749558,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80300-AN203","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - Coilover Suspension Full Kit Hipermax S - Nissan Elgrand PE52\/PNE52\/TE52\/TNE52 (2010-2018)","public_title":null,"options":["Default Title"],"price":203682,"weight":30000,"compare_at_price":245400,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-nissan-elgrand-pe52pne52te52tne52-2010-2018-rzcrew.jpg?v=1710324725"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-nissan-elgrand-pe52pne52te52tne52-2010-2018-rzcrew.jpg?v=1710324725","options":["Title"],"media":[{"alt":"HKS - Coilover Suspension Full Kit Hipermax S - Nissan Elgrand PE52\/PNE52\/TE52\/TNE52 (2010-2018) - 80300-AN203 - Rzcrewgarage","id":22891661557942,"position":1,"preview_image":{"aspect_ratio":1.21,"height":496,"width":600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-nissan-elgrand-pe52pne52te52tne52-2010-2018-rzcrew.jpg?v=1710324725"},"aspect_ratio":1.21,"height":496,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-nissan-elgrand-pe52pne52te52tne52-2010-2018-rzcrew.jpg?v=1710324725","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS:\u003cbr\u003eManufacturer: HKS\u003cbr\u003eAdjustability: Dampening and Height Adjustable\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003ePE52\u003cbr\u003eSeries: Hipermax S\u003cbr\u003eSpring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: 68(7)\u003cbr\u003e- Rear: 105(10.7)\u003cbr\u003eFree Height (mm):\u003cbr\u003e- Front: 220(Barrel)\u003cbr\u003e- Rear: Special\u003cbr\u003eRecommended Range to change Spring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: ±10 (1 )\u003cbr\u003e- Rear: N\/A\u003cbr\u003eDamper Force (Rebound\/Damping):\u003cbr\u003e- Front: 540\/604\u003cbr\u003e- Rear: 662\/368\u003cbr\u003e- Note: Damping force is at piston speed 0.1m\/sec.\u003cbr\u003eDefault position of Dial:\u003cbr\u003e- Front: 15\u003cbr\u003e- Rear: 15\u003cbr\u003eDamping Force Adjustment:\u003cbr\u003e- Front: 30 Steps\u003cbr\u003e- Rear: 30 Steps\u003cbr\u003eHeight Adjustable Lower Bracket:\u003cbr\u003e- Front: Yes\u003cbr\u003e- Rear: Yes\u003cbr\u003eUpper Mount:\u003cbr\u003e- Front: Rubber Bush\u003cbr\u003e- Rear: OEM\u003cbr\u003eDamper Layout:\u003cbr\u003e- Front: Inverted\u003cbr\u003e- Rear: Normal\u003cbr\u003eDamper\/Spring Layout:\u003cbr\u003e- Front: Coilover\u003cbr\u003e- Rear: Separate\u003cbr\u003eDamping force adjustable with Wire:\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: N\/A\u003cbr\u003eHelper Spring (Spring Rate N\/mm):\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: N\/A\u003cbr\u003eRide Height Specification -\u003cbr\u003e-Maximum Adjustable Range High - Low (mm):\u003cbr\u003e-- Front: -12 ～ -68\u003cbr\u003e-- Rear: -14 ～ -84\u003cbr\u003e-Drivable Range High - Low (mm):\u003cbr\u003e-- Front: -12 ～ -68\u003cbr\u003e-- Rear: -14 ～ -84\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- PE52: 2WD Highway Star 7 seater only\u003cbr\u003e- PNE52: 4WD Highway Star 7 seater only\u003cbr\u003e- TE52: 2WD Highway Star 7 seater only\u003cbr\u003e- TNE52: 4WD Highway Star 7 seater only\u003cbr\u003eThis set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV GT release this series has unified the many different street based Hipermax merits and further improved this new flagship series for the ultimate combination of driving performance and comfort performance, Driving Comfort. With exception of the circuit specific HIpermax IV SP series all other series will be replaced with this all-mighty spec. Specifically developed to provide the ultimate in harmony between performance handling and control with supreme ride comfort yet capable of high level performance on circuit as well. With massive adjustability in ride height and damper settings these items are an excellent choice for the daily driver to look and perform best under any kind of circumstance.\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual shape may differ.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - Elgrand - PE52 (2010-2018) VQ35DE\u003cbr\u003eNissan - Elgrand - PNE52 (2010-2018) VQ35DE\u003cbr\u003eNissan - Elgrand - TE52 (2010-2018) QR25DE\u003cbr\u003eNissan - Elgrand - TNE52 (2010-2018) QR25DE\u003c!--split--\u003e"}

{"id":6791104299190,"title":"HKS - Coilover Suspension Full Kit Hipermax S - Nissan Fairlady Z Z34 (2008-2018)","handle":"hks-coilover-suspension-full-kit-hipermax-s-nissan-fairlady-z-z34-2008-2018-80300-an009","description":"SPECIFICATIONS:\u003cbr\u003eManufacturer: HKS\u003cbr\u003eAdjustability: Dampening and Height Adjustable\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eSeries: Hipermax S\u003cbr\u003eSpring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: 98(10)\u003cbr\u003e- Rear: 88(9)\u003cbr\u003eFree Height (mm):\u003cbr\u003e- Front: 200\u003cbr\u003e- Rear: Special\u003cbr\u003eRecommended Range to change Spring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: ±20 ( 2 )\u003cbr\u003e- Rear: N\/A\u003cbr\u003eDamper Force (Rebound\/Damping):\u003cbr\u003e- Front: 1158\/456\u003cbr\u003e- Rear: 642\/343\u003cbr\u003e- Note: Damping force is at piston speed 0.1m\/sec.\u003cbr\u003eDefault position of Dial:\u003cbr\u003e- Front: 15\u003cbr\u003e- Rear: 15\u003cbr\u003eDamping Force Adjustment:\u003cbr\u003e- Front: 30 Steps\u003cbr\u003e- Rear: 30 Steps\u003cbr\u003eHeight Adjustable Lower Bracket:\u003cbr\u003e- Front: Yes\u003cbr\u003e- Rear: Yes\u003cbr\u003eUpper Mount:\u003cbr\u003e- Front: Rubber Bush\u003cbr\u003e- Rear: Rubber Bush\u003cbr\u003eDamper Layout:\u003cbr\u003e- Front: Normal\u003cbr\u003e- Rear: Normal\u003cbr\u003eDamper\/Spring Layout:\u003cbr\u003e- Front: Coilover\u003cbr\u003e- Rear: Separate\u003cbr\u003eDamping force adjustable with Wire:\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: N\/A\u003cbr\u003eHelper Spring (Spring Rate N\/mm):\u003cbr\u003e- Front: 19.8\u003cbr\u003e- Rear: N\/A\u003cbr\u003eRide Height Specification -\u003cbr\u003e-Maximum Adjustable Range High - Low (mm):\u003cbr\u003e-- Front: ～ -43\u003cbr\u003e-- Rear: ～ -43\u003cbr\u003e-Drivable Range High - Low (mm):\u003cbr\u003e-- Front: ～ -43\u003cbr\u003e-- Rear: ～ -43\u003cbr\u003eThis set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV GT release this series has unified the many different street based Hipermax merits and further improved this new flagship series for the ultimate combination of driving performance and comfort performance, Driving Comfort. With exception of the circuit specific HIpermax IV SP series all other series will be replaced with this all-mighty spec. Specifically developed to provide the ultimate in harmony between performance handling and control with supreme ride comfort yet capable of high level performance on circuit as well. With massive adjustability in ride height and damper settings these items are an excellent choice for the daily driver to look and perform best under any kind of circumstance.\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual shape may differ.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - Fairlady Z - Z34 (2008-2012) VQ37VHR\u003cbr\u003eNissan - Fairlady Z - Z34 (2012-2018) VQ37VHR\u003c!--split--\u003e","published_at":"2021-06-15T18:21:41+08:00","created_at":"2021-06-15T18:21:42+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","233000x30y1z0","coilover-kits","coilovers-and-springs","CTA98","dampening-and-height-adjustable","fairlady-z-z34-kouki-2012-2018-na-vq37vhr-v6","fairlady-z-z34-zenki-2008-2012-na-vq37vhr-v6","hks","JP1","nissan","ws122"],"price":186833,"price_min":186833,"price_max":186833,"available":true,"price_varies":false,"compare_at_price":225100,"compare_at_price_min":225100,"compare_at_price_max":225100,"compare_at_price_varies":false,"variants":[{"id":39940588437686,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80300-AN009","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - Coilover Suspension Full Kit Hipermax S - Nissan Fairlady Z Z34 (2008-2018)","public_title":null,"options":["Default Title"],"price":186833,"weight":30000,"compare_at_price":225100,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-nissan-fairlady-z-z34-2008-2018-rzcrew.jpg?v=1710324723"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-nissan-fairlady-z-z34-2008-2018-rzcrew.jpg?v=1710324723","options":["Title"],"media":[{"alt":"HKS - Coilover Suspension Full Kit Hipermax S - Nissan Fairlady Z Z34 (2008-2018) - 80300-AN009 - Rzcrewgarage","id":22891662213302,"position":1,"preview_image":{"aspect_ratio":1.21,"height":496,"width":600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-nissan-fairlady-z-z34-2008-2018-rzcrew.jpg?v=1710324723"},"aspect_ratio":1.21,"height":496,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-nissan-fairlady-z-z34-2008-2018-rzcrew.jpg?v=1710324723","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS:\u003cbr\u003eManufacturer: HKS\u003cbr\u003eAdjustability: Dampening and Height Adjustable\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eSeries: Hipermax S\u003cbr\u003eSpring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: 98(10)\u003cbr\u003e- Rear: 88(9)\u003cbr\u003eFree Height (mm):\u003cbr\u003e- Front: 200\u003cbr\u003e- Rear: Special\u003cbr\u003eRecommended Range to change Spring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: ±20 ( 2 )\u003cbr\u003e- Rear: N\/A\u003cbr\u003eDamper Force (Rebound\/Damping):\u003cbr\u003e- Front: 1158\/456\u003cbr\u003e- Rear: 642\/343\u003cbr\u003e- Note: Damping force is at piston speed 0.1m\/sec.\u003cbr\u003eDefault position of Dial:\u003cbr\u003e- Front: 15\u003cbr\u003e- Rear: 15\u003cbr\u003eDamping Force Adjustment:\u003cbr\u003e- Front: 30 Steps\u003cbr\u003e- Rear: 30 Steps\u003cbr\u003eHeight Adjustable Lower Bracket:\u003cbr\u003e- Front: Yes\u003cbr\u003e- Rear: Yes\u003cbr\u003eUpper Mount:\u003cbr\u003e- Front: Rubber Bush\u003cbr\u003e- Rear: Rubber Bush\u003cbr\u003eDamper Layout:\u003cbr\u003e- Front: Normal\u003cbr\u003e- Rear: Normal\u003cbr\u003eDamper\/Spring Layout:\u003cbr\u003e- Front: Coilover\u003cbr\u003e- Rear: Separate\u003cbr\u003eDamping force adjustable with Wire:\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: N\/A\u003cbr\u003eHelper Spring (Spring Rate N\/mm):\u003cbr\u003e- Front: 19.8\u003cbr\u003e- Rear: N\/A\u003cbr\u003eRide Height Specification -\u003cbr\u003e-Maximum Adjustable Range High - Low (mm):\u003cbr\u003e-- Front: ～ -43\u003cbr\u003e-- Rear: ～ -43\u003cbr\u003e-Drivable Range High - Low (mm):\u003cbr\u003e-- Front: ～ -43\u003cbr\u003e-- Rear: ～ -43\u003cbr\u003eThis set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV GT release this series has unified the many different street based Hipermax merits and further improved this new flagship series for the ultimate combination of driving performance and comfort performance, Driving Comfort. With exception of the circuit specific HIpermax IV SP series all other series will be replaced with this all-mighty spec. Specifically developed to provide the ultimate in harmony between performance handling and control with supreme ride comfort yet capable of high level performance on circuit as well. With massive adjustability in ride height and damper settings these items are an excellent choice for the daily driver to look and perform best under any kind of circumstance.\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual shape may differ.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - Fairlady Z - Z34 (2008-2012) VQ37VHR\u003cbr\u003eNissan - Fairlady Z - Z34 (2012-2018) VQ37VHR\u003c!--split--\u003e"}

{"id":6791104528566,"title":"HKS - Coilover Suspension Full Kit Hipermax S - Nissan Skyline Coupe CKV36 (2007-2018)","handle":"hks-coilover-suspension-full-kit-hipermax-s-nissan-skyline-coupe-ckv36-2007-2018-80300-an004","description":"SPECIFICATIONS:\u003cbr\u003eManufacturer: HKS\u003cbr\u003eAdjustability: Dampening and Height Adjustable\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eV36\u003cbr\u003eSeries: Hipermax S\u003cbr\u003eSpring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: 98(10)\u003cbr\u003e- Rear: 88(9)\u003cbr\u003eFree Height (mm):\u003cbr\u003e- Front: 220(Barrel)\u003cbr\u003e- Rear: Special\u003cbr\u003eRecommended Range to change Spring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: -10 ( 1 )\u003cbr\u003e- Rear: N\/A\u003cbr\u003eDamper Force (Rebound\/Damping):\u003cbr\u003e- Front: 1015\/427\u003cbr\u003e- Rear: 584\/319\u003cbr\u003e- Note: Damping force is at piston speed 0.1m\/sec.\u003cbr\u003eDefault position of Dial:\u003cbr\u003e- Front: 15\u003cbr\u003e- Rear: 15\u003cbr\u003eDamping Force Adjustment:\u003cbr\u003e- Front: 30 Steps\u003cbr\u003e- Rear: 30 Steps\u003cbr\u003eHeight Adjustable Lower Bracket:\u003cbr\u003e- Front: Yes\u003cbr\u003e- Rear: Yes\u003cbr\u003eUpper Mount:\u003cbr\u003e- Front: Rubber Bush\u003cbr\u003e- Rear: Rubber Bush\u003cbr\u003eDamper Layout:\u003cbr\u003e- Front: Normal\u003cbr\u003e- Rear: Normal\u003cbr\u003eDamper\/Spring Layout:\u003cbr\u003e- Front: Coilover\u003cbr\u003e- Rear: Separate\u003cbr\u003eDamping force adjustable with Wire:\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: N\/A\u003cbr\u003eHelper Spring (Spring Rate N\/mm):\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: N\/A\u003cbr\u003eRide Height Specification -\u003cbr\u003e-Maximum Adjustable Range High - Low (mm):\u003cbr\u003e-- Front: ～ -40\u003cbr\u003e-- Rear: -5 ～ -60\u003cbr\u003e-Drivable Range High - Low (mm):\u003cbr\u003e-- Front: ～ -40\u003cbr\u003e-- Rear: - -5 ～ -60\u003cbr\u003eThis set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV GT release this series has unified the many different street based Hipermax merits and further improved this new flagship series for the ultimate combination of driving performance and comfort performance, Driving Comfort. With exception of the circuit specific HIpermax IV SP series all other series will be replaced with this all-mighty spec. Specifically developed to provide the ultimate in harmony between performance handling and control with supreme ride comfort yet capable of high level performance on circuit as well. With massive adjustability in ride height and damper settings these items are an excellent choice for the daily driver to look and perform best under any kind of circumstance.\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual shape may differ.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - Skyline Coupe - CKV36 (2007-2008) VQ37VHR\u003cbr\u003eNissan - Skyline Coupe - CKV36 (2008-2018) VQ37VHR\u003c!--split--\u003e","published_at":"2021-06-15T18:21:46+08:00","created_at":"2021-06-15T18:21:47+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","254000x30y1z0","coilover-kits","coilovers-and-springs","CTA98","dampening-and-height-adjustable","hks","JP1","nissan","skyline-coupe-ckv36-kouki-2008-2018-na-vq37vhr-v6","skyline-coupe-ckv36-zenki-2007-2008-na-vq37vhr-v6","ws122"],"price":203682,"price_min":203682,"price_max":203682,"available":true,"price_varies":false,"compare_at_price":245400,"compare_at_price_min":245400,"compare_at_price_max":245400,"compare_at_price_varies":false,"variants":[{"id":39940588535990,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80300-AN004","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - Coilover Suspension Full Kit Hipermax S - Nissan Skyline Coupe CKV36 (2007-2018)","public_title":null,"options":["Default Title"],"price":203682,"weight":30000,"compare_at_price":245400,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-nissan-skyline-coupe-ckv36-2007-2018-rzcrew.jpg?v=1710324721"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-nissan-skyline-coupe-ckv36-2007-2018-rzcrew.jpg?v=1710324721","options":["Title"],"media":[{"alt":"HKS - Coilover Suspension Full Kit Hipermax S - Nissan Skyline Coupe CKV36 (2007-2018) - 80300-AN004 - Rzcrewgarage","id":22891662770358,"position":1,"preview_image":{"aspect_ratio":1.21,"height":496,"width":600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-nissan-skyline-coupe-ckv36-2007-2018-rzcrew.jpg?v=1710324721"},"aspect_ratio":1.21,"height":496,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-nissan-skyline-coupe-ckv36-2007-2018-rzcrew.jpg?v=1710324721","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS:\u003cbr\u003eManufacturer: HKS\u003cbr\u003eAdjustability: Dampening and Height Adjustable\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eV36\u003cbr\u003eSeries: Hipermax S\u003cbr\u003eSpring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: 98(10)\u003cbr\u003e- Rear: 88(9)\u003cbr\u003eFree Height (mm):\u003cbr\u003e- Front: 220(Barrel)\u003cbr\u003e- Rear: Special\u003cbr\u003eRecommended Range to change Spring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: -10 ( 1 )\u003cbr\u003e- Rear: N\/A\u003cbr\u003eDamper Force (Rebound\/Damping):\u003cbr\u003e- Front: 1015\/427\u003cbr\u003e- Rear: 584\/319\u003cbr\u003e- Note: Damping force is at piston speed 0.1m\/sec.\u003cbr\u003eDefault position of Dial:\u003cbr\u003e- Front: 15\u003cbr\u003e- Rear: 15\u003cbr\u003eDamping Force Adjustment:\u003cbr\u003e- Front: 30 Steps\u003cbr\u003e- Rear: 30 Steps\u003cbr\u003eHeight Adjustable Lower Bracket:\u003cbr\u003e- Front: Yes\u003cbr\u003e- Rear: Yes\u003cbr\u003eUpper Mount:\u003cbr\u003e- Front: Rubber Bush\u003cbr\u003e- Rear: Rubber Bush\u003cbr\u003eDamper Layout:\u003cbr\u003e- Front: Normal\u003cbr\u003e- Rear: Normal\u003cbr\u003eDamper\/Spring Layout:\u003cbr\u003e- Front: Coilover\u003cbr\u003e- Rear: Separate\u003cbr\u003eDamping force adjustable with Wire:\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: N\/A\u003cbr\u003eHelper Spring (Spring Rate N\/mm):\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: N\/A\u003cbr\u003eRide Height Specification -\u003cbr\u003e-Maximum Adjustable Range High - Low (mm):\u003cbr\u003e-- Front: ～ -40\u003cbr\u003e-- Rear: -5 ～ -60\u003cbr\u003e-Drivable Range High - Low (mm):\u003cbr\u003e-- Front: ～ -40\u003cbr\u003e-- Rear: - -5 ～ -60\u003cbr\u003eThis set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV GT release this series has unified the many different street based Hipermax merits and further improved this new flagship series for the ultimate combination of driving performance and comfort performance, Driving Comfort. With exception of the circuit specific HIpermax IV SP series all other series will be replaced with this all-mighty spec. Specifically developed to provide the ultimate in harmony between performance handling and control with supreme ride comfort yet capable of high level performance on circuit as well. With massive adjustability in ride height and damper settings these items are an excellent choice for the daily driver to look and perform best under any kind of circumstance.\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual shape may differ.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - Skyline Coupe - CKV36 (2007-2008) VQ37VHR\u003cbr\u003eNissan - Skyline Coupe - CKV36 (2008-2018) VQ37VHR\u003c!--split--\u003e"}

{"id":6791104561334,"title":"HKS - Coilover Suspension Full Kit Hipermax S - Nissan Skyline Sedan KV36\/PV36\/V36 (2006-2018)","handle":"hks-coilover-suspension-full-kit-hipermax-s-nissan-skyline-sedan-kv36-pv36-v36-2006-2018-80300-an004","description":"SPECIFICATIONS:\u003cbr\u003eManufacturer: HKS\u003cbr\u003eAdjustability: Dampening and Height Adjustable\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eV36\u003cbr\u003eSeries: Hipermax S\u003cbr\u003eSpring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: 98(10)\u003cbr\u003e- Rear: 88(9)\u003cbr\u003eFree Height (mm):\u003cbr\u003e- Front: 220(Barrel)\u003cbr\u003e- Rear: Special\u003cbr\u003eRecommended Range to change Spring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: -10 ( 1 )\u003cbr\u003e- Rear: N\/A\u003cbr\u003eDamper Force (Rebound\/Damping):\u003cbr\u003e- Front: 1015\/427\u003cbr\u003e- Rear: 584\/319\u003cbr\u003e- Note: Damping force is at piston speed 0.1m\/sec.\u003cbr\u003eDefault position of Dial:\u003cbr\u003e- Front: 15\u003cbr\u003e- Rear: 15\u003cbr\u003eDamping Force Adjustment:\u003cbr\u003e- Front: 30 Steps\u003cbr\u003e- Rear: 30 Steps\u003cbr\u003eHeight Adjustable Lower Bracket:\u003cbr\u003e- Front: Yes\u003cbr\u003e- Rear: Yes\u003cbr\u003eUpper Mount:\u003cbr\u003e- Front: Rubber Bush\u003cbr\u003e- Rear: Rubber Bush\u003cbr\u003eDamper Layout:\u003cbr\u003e- Front: Normal\u003cbr\u003e- Rear: Normal\u003cbr\u003eDamper\/Spring Layout:\u003cbr\u003e- Front: Coilover\u003cbr\u003e- Rear: Separate\u003cbr\u003eDamping force adjustable with Wire:\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: N\/A\u003cbr\u003eHelper Spring (Spring Rate N\/mm):\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: N\/A\u003cbr\u003eRide Height Specification -\u003cbr\u003e-Maximum Adjustable Range High - Low (mm):\u003cbr\u003e-- Front: ～ -40\u003cbr\u003e-- Rear: -5 ～ -60\u003cbr\u003e-Drivable Range High - Low (mm):\u003cbr\u003e-- Front: ～ -40\u003cbr\u003e-- Rear: - -5 ～ -60\u003cbr\u003eThis set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV GT release this series has unified the many different street based Hipermax merits and further improved this new flagship series for the ultimate combination of driving performance and comfort performance, Driving Comfort. With exception of the circuit specific HIpermax IV SP series all other series will be replaced with this all-mighty spec. Specifically developed to provide the ultimate in harmony between performance handling and control with supreme ride comfort yet capable of high level performance on circuit as well. With massive adjustability in ride height and damper settings these items are an excellent choice for the daily driver to look and perform best under any kind of circumstance.\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual shape may differ.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - Skyline Sedan - KV36 (2008-2018) VQ37VHR\u003cbr\u003eNissan - Skyline Sedan - PV36 (2006-2007) VQ35HR\u003cbr\u003eNissan - Skyline Sedan - PV36 (2007-2008) VQ35HR\u003cbr\u003eNissan - Skyline Sedan - PV36 (2008-2018) VQ35HR\u003cbr\u003eNissan - Skyline Sedan - V36 (2006-2007) VQ25HR\u003cbr\u003eNissan - Skyline Sedan - V36 (2007-2008) VQ25HR\u003cbr\u003eNissan - Skyline Sedan - V36 (2008-2018) VQ25HR\u003c!--split--\u003e","published_at":"2021-06-15T18:21:51+08:00","created_at":"2021-06-15T18:21:52+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","254000x30y1z0","coilover-kits","coilovers-and-springs","CTA98","dampening-and-height-adjustable","hks","JP1","nissan","skyline-sedan-kv36-kouki-2008-2018-na-vq37vhr-v6","skyline-sedan-pv36-chuki-2007-2008-na-vq35hr-v6","skyline-sedan-pv36-kouki-2008-2018-na-vq35hr-v6","skyline-sedan-pv36-zenki-2006-2007-na-vq35hr-v6","skyline-sedan-v36-chuki-2007-2008-na-vq25hr-v6","skyline-sedan-v36-kouki-2008-2018-na-vq25hr-v6","skyline-sedan-v36-zenki-2006-2007-na-vq25hr-v6","ws122"],"price":203682,"price_min":203682,"price_max":203682,"available":true,"price_varies":false,"compare_at_price":245400,"compare_at_price_min":245400,"compare_at_price_max":245400,"compare_at_price_varies":false,"variants":[{"id":39940588568758,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80300-AN004","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - Coilover Suspension Full Kit Hipermax S - Nissan Skyline Sedan KV36\/PV36\/V36 (2006-2018)","public_title":null,"options":["Default Title"],"price":203682,"weight":30000,"compare_at_price":245400,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-nissan-skyline-sedan-kv36pv36v36-2006-2018-rzcrew.jpg?v=1710324721"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-nissan-skyline-sedan-kv36pv36v36-2006-2018-rzcrew.jpg?v=1710324721","options":["Title"],"media":[{"alt":"HKS - Coilover Suspension Full Kit Hipermax S - Nissan Skyline Sedan KV36\/PV36\/V36 (2006-2018) - 80300-AN004 - Rzcrewgarage","id":22891663032502,"position":1,"preview_image":{"aspect_ratio":1.21,"height":496,"width":600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-nissan-skyline-sedan-kv36pv36v36-2006-2018-rzcrew.jpg?v=1710324721"},"aspect_ratio":1.21,"height":496,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-nissan-skyline-sedan-kv36pv36v36-2006-2018-rzcrew.jpg?v=1710324721","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS:\u003cbr\u003eManufacturer: HKS\u003cbr\u003eAdjustability: Dampening and Height Adjustable\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eV36\u003cbr\u003eSeries: Hipermax S\u003cbr\u003eSpring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: 98(10)\u003cbr\u003e- Rear: 88(9)\u003cbr\u003eFree Height (mm):\u003cbr\u003e- Front: 220(Barrel)\u003cbr\u003e- Rear: Special\u003cbr\u003eRecommended Range to change Spring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: -10 ( 1 )\u003cbr\u003e- Rear: N\/A\u003cbr\u003eDamper Force (Rebound\/Damping):\u003cbr\u003e- Front: 1015\/427\u003cbr\u003e- Rear: 584\/319\u003cbr\u003e- Note: Damping force is at piston speed 0.1m\/sec.\u003cbr\u003eDefault position of Dial:\u003cbr\u003e- Front: 15\u003cbr\u003e- Rear: 15\u003cbr\u003eDamping Force Adjustment:\u003cbr\u003e- Front: 30 Steps\u003cbr\u003e- Rear: 30 Steps\u003cbr\u003eHeight Adjustable Lower Bracket:\u003cbr\u003e- Front: Yes\u003cbr\u003e- Rear: Yes\u003cbr\u003eUpper Mount:\u003cbr\u003e- Front: Rubber Bush\u003cbr\u003e- Rear: Rubber Bush\u003cbr\u003eDamper Layout:\u003cbr\u003e- Front: Normal\u003cbr\u003e- Rear: Normal\u003cbr\u003eDamper\/Spring Layout:\u003cbr\u003e- Front: Coilover\u003cbr\u003e- Rear: Separate\u003cbr\u003eDamping force adjustable with Wire:\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: N\/A\u003cbr\u003eHelper Spring (Spring Rate N\/mm):\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: N\/A\u003cbr\u003eRide Height Specification -\u003cbr\u003e-Maximum Adjustable Range High - Low (mm):\u003cbr\u003e-- Front: ～ -40\u003cbr\u003e-- Rear: -5 ～ -60\u003cbr\u003e-Drivable Range High - Low (mm):\u003cbr\u003e-- Front: ～ -40\u003cbr\u003e-- Rear: - -5 ～ -60\u003cbr\u003eThis set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV GT release this series has unified the many different street based Hipermax merits and further improved this new flagship series for the ultimate combination of driving performance and comfort performance, Driving Comfort. With exception of the circuit specific HIpermax IV SP series all other series will be replaced with this all-mighty spec. Specifically developed to provide the ultimate in harmony between performance handling and control with supreme ride comfort yet capable of high level performance on circuit as well. With massive adjustability in ride height and damper settings these items are an excellent choice for the daily driver to look and perform best under any kind of circumstance.\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual shape may differ.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - Skyline Sedan - KV36 (2008-2018) VQ37VHR\u003cbr\u003eNissan - Skyline Sedan - PV36 (2006-2007) VQ35HR\u003cbr\u003eNissan - Skyline Sedan - PV36 (2007-2008) VQ35HR\u003cbr\u003eNissan - Skyline Sedan - PV36 (2008-2018) VQ35HR\u003cbr\u003eNissan - Skyline Sedan - V36 (2006-2007) VQ25HR\u003cbr\u003eNissan - Skyline Sedan - V36 (2007-2008) VQ25HR\u003cbr\u003eNissan - Skyline Sedan - V36 (2008-2018) VQ25HR\u003c!--split--\u003e"}

{"id":6792876458166,"title":"HKS - Coilover Suspension Full Kit Hipermax S - Suzuki Swift ZC72S (2009-2018)","handle":"hks-coilover-suspension-full-kit-hipermax-s-suzuki-swift-zc72s-2009-2018-80300-as001","description":"SPECIFICATIONS:\u003cbr\u003eManufacturer: HKS\u003cbr\u003eAdjustability: Dampening and Height Adjustable\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eZC32S\u003cbr\u003eSeries: Hipermax S\u003cbr\u003eSpring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: 49 (5)\u003cbr\u003e- Rear: 49 (5)\u003cbr\u003eFree Height (mm):\u003cbr\u003e- Front: 200(Barrel)\u003cbr\u003e- Rear: 170 (Barrel)\u003cbr\u003eRecommended Range to change Spring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: ±10 ( 1 )\u003cbr\u003e- Rear: N\/A\u003cbr\u003eDamper Force (Rebound\/Damping):\u003cbr\u003e- Front: 397 \/ 211\u003cbr\u003e- Rear: 265 \/ 142\u003cbr\u003e- Note: Damping force is at piston speed 0.1m\/sec.\u003cbr\u003eDefault position of Dial:\u003cbr\u003e- Front: 15\u003cbr\u003e- Rear: 15\u003cbr\u003eDamping Force Adjustment:\u003cbr\u003e- Front: 30 Steps\u003cbr\u003e- Rear: 30 Steps\u003cbr\u003eHeight Adjustable Lower Bracket:\u003cbr\u003e- Front: Yes\u003cbr\u003e- Rear: Yes\u003cbr\u003eUpper Mount:\u003cbr\u003e- Front: OEM\u003cbr\u003e- Rear: OEM\u003cbr\u003eDamper Layout:\u003cbr\u003e- Front: Inverted\u003cbr\u003e- Rear: Normal\u003cbr\u003eDamper\/Spring Layout:\u003cbr\u003e- Front: Coilover\u003cbr\u003e- Rear: Separate\u003cbr\u003eDamping force adjustable with Wire:\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: N\/A\u003cbr\u003eHelper Spring (Spring Rate N\/mm):\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: N\/A\u003cbr\u003eRide Height Specification -\u003cbr\u003e-Maximum Adjustable Range High - Low (mm):\u003cbr\u003e-- Front: -19 ～ -50\u003cbr\u003e-- Rear: -26 ～ -67\u003cbr\u003e-Drivable Range High - Low (mm):\u003cbr\u003e-- Front: -19 ～ -50\u003cbr\u003e-- Rear: -26 ～ -67\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- ZC72S: Vehicles 08\/10~12\/16 only\u003cbr\u003eThis set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV GT release this series has unified the many different street based Hipermax merits and further improved this new flagship series for the ultimate combination of driving performance and comfort performance, Driving Comfort. With exception of the circuit specific HIpermax IV SP series all other series will be replaced with this all-mighty spec. Specifically developed to provide the ultimate in harmony between performance handling and control with supreme ride comfort yet capable of high level performance on circuit as well. With massive adjustability in ride height and damper settings these items are an excellent choice for the daily driver to look and perform best under any kind of circumstance.\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual shape may differ.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Swift - ZC72S (2009-2013) K12B\u003cbr\u003eSuzuki - Swift - ZC72S (2013-2018) K12B\u003c!--split--\u003e","published_at":"2021-06-16T13:20:30+08:00","created_at":"2021-06-16T13:20:31+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","233000x30y1z0","coilover-kits","coilovers-and-springs","CTA98","dampening-and-height-adjustable","hks","JP1","suzuki","swift-zc72s-2010-2018-na-k12b-i4","ws122"],"price":186833,"price_min":186833,"price_max":186833,"available":true,"price_varies":false,"compare_at_price":225100,"compare_at_price_min":225100,"compare_at_price_max":225100,"compare_at_price_varies":false,"variants":[{"id":39946543628470,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80300-AS001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - Coilover Suspension Full Kit Hipermax S - Suzuki Swift ZC72S (2009-2018)","public_title":null,"options":["Default Title"],"price":186833,"weight":30000,"compare_at_price":225100,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-suzuki-swift-zc72s-2009-2018-rzcrew.jpg?v=1710324715"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-suzuki-swift-zc72s-2009-2018-rzcrew.jpg?v=1710324715","options":["Title"],"media":[{"alt":"HKS - Coilover Suspension Full Kit Hipermax S - Suzuki Swift ZC72S (2009-2018) - 80300-AS001 - Rzcrewgarage","id":26854102728886,"position":1,"preview_image":{"aspect_ratio":1.21,"height":496,"width":600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-suzuki-swift-zc72s-2009-2018-rzcrew.jpg?v=1710324715"},"aspect_ratio":1.21,"height":496,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-suzuki-swift-zc72s-2009-2018-rzcrew.jpg?v=1710324715","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS:\u003cbr\u003eManufacturer: HKS\u003cbr\u003eAdjustability: Dampening and Height Adjustable\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eZC32S\u003cbr\u003eSeries: Hipermax S\u003cbr\u003eSpring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: 49 (5)\u003cbr\u003e- Rear: 49 (5)\u003cbr\u003eFree Height (mm):\u003cbr\u003e- Front: 200(Barrel)\u003cbr\u003e- Rear: 170 (Barrel)\u003cbr\u003eRecommended Range to change Spring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: ±10 ( 1 )\u003cbr\u003e- Rear: N\/A\u003cbr\u003eDamper Force (Rebound\/Damping):\u003cbr\u003e- Front: 397 \/ 211\u003cbr\u003e- Rear: 265 \/ 142\u003cbr\u003e- Note: Damping force is at piston speed 0.1m\/sec.\u003cbr\u003eDefault position of Dial:\u003cbr\u003e- Front: 15\u003cbr\u003e- Rear: 15\u003cbr\u003eDamping Force Adjustment:\u003cbr\u003e- Front: 30 Steps\u003cbr\u003e- Rear: 30 Steps\u003cbr\u003eHeight Adjustable Lower Bracket:\u003cbr\u003e- Front: Yes\u003cbr\u003e- Rear: Yes\u003cbr\u003eUpper Mount:\u003cbr\u003e- Front: OEM\u003cbr\u003e- Rear: OEM\u003cbr\u003eDamper Layout:\u003cbr\u003e- Front: Inverted\u003cbr\u003e- Rear: Normal\u003cbr\u003eDamper\/Spring Layout:\u003cbr\u003e- Front: Coilover\u003cbr\u003e- Rear: Separate\u003cbr\u003eDamping force adjustable with Wire:\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: N\/A\u003cbr\u003eHelper Spring (Spring Rate N\/mm):\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: N\/A\u003cbr\u003eRide Height Specification -\u003cbr\u003e-Maximum Adjustable Range High - Low (mm):\u003cbr\u003e-- Front: -19 ～ -50\u003cbr\u003e-- Rear: -26 ～ -67\u003cbr\u003e-Drivable Range High - Low (mm):\u003cbr\u003e-- Front: -19 ～ -50\u003cbr\u003e-- Rear: -26 ～ -67\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- ZC72S: Vehicles 08\/10~12\/16 only\u003cbr\u003eThis set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV GT release this series has unified the many different street based Hipermax merits and further improved this new flagship series for the ultimate combination of driving performance and comfort performance, Driving Comfort. With exception of the circuit specific HIpermax IV SP series all other series will be replaced with this all-mighty spec. Specifically developed to provide the ultimate in harmony between performance handling and control with supreme ride comfort yet capable of high level performance on circuit as well. With massive adjustability in ride height and damper settings these items are an excellent choice for the daily driver to look and perform best under any kind of circumstance.\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual shape may differ.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Swift - ZC72S (2009-2013) K12B\u003cbr\u003eSuzuki - Swift - ZC72S (2013-2018) K12B\u003c!--split--\u003e"}

{"id":1424937189473,"title":"HKS - High Flow Surge Tank Manifold - Nissan - GT-R R35","handle":"hks-high-flow-surge-tank-manifold-nissan-gt-r-r35-13008-an002","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 13008-AN002\u003cbr\u003eIntake Type: Intake Manifolds\u003cbr\u003e\u003cbr\u003eAlso known as an 'intake plenum', the HKS High flow Surge Tank comes with increased the volume capacity and design to have better distribution of airflow through the ports. With a larger runners and a significant increase on the collector tanks along with refined internals for better airflow, the item is an excellent upgrade for tuned VR38 engines. This Intake is a bolt on replacement to the Oem part. It will fit with the stock Thottle bodies!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eGT-R | R35 Zenki | 2007-2010 | TT | VR38DETT | V6\u003cbr\u003eGT-R | R35 Chuki | 2010-2016 | TT | VR38DETT | V6\u003cbr\u003eGT-R | R35 Kouki | 2016-2018 | TT | VR38DETT | V6\u003c!--split--\u003e","published_at":"2018-09-02T21:13:22+08:00","created_at":"2018-09-02T21:13:23+08:00","vendor":"HKS","type":"Intake Manifolds","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","270000x14y1.1z0","CTA662","gt-r-r35-chuki-2010-2016-tt-vr38dett-v6","gt-r-r35-kouki-2016-2018-tt-vr38dett-v6","gt-r-r35-zenki-2007-2010-tt-vr38dett-v6","hks","intake","intake-manifolds","JP1","manifolds","nissan","ws116"],"price":259791,"price_min":259791,"price_max":259791,"available":true,"price_varies":false,"compare_at_price":291900,"compare_at_price_min":291900,"compare_at_price_max":291900,"compare_at_price_varies":false,"variants":[{"id":12418404417633,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"13008-AN002","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - High Flow Surge Tank Manifold - Nissan - GT-R R35","public_title":null,"options":["Default Title"],"price":259791,"weight":12000,"compare_at_price":291900,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/13008-AN002_a48d3993-d0b4-4e71-8811-3de8d1c30ffa.jpg?v=1710167464"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/13008-AN002_a48d3993-d0b4-4e71-8811-3de8d1c30ffa.jpg?v=1710167464","options":["Title"],"media":[{"alt":"HKS - High Flow Surge Tank Manifold - Nissan - GT-R R35 - 13008-AN002","id":25563119845558,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1275,"width":1700,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/13008-AN002_a48d3993-d0b4-4e71-8811-3de8d1c30ffa.jpg?v=1710167464"},"aspect_ratio":1.333,"height":1275,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/13008-AN002_a48d3993-d0b4-4e71-8811-3de8d1c30ffa.jpg?v=1710167464","width":1700}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 13008-AN002\u003cbr\u003eIntake Type: Intake Manifolds\u003cbr\u003e\u003cbr\u003eAlso known as an 'intake plenum', the HKS High flow Surge Tank comes with increased the volume capacity and design to have better distribution of airflow through the ports. With a larger runners and a significant increase on the collector tanks along with refined internals for better airflow, the item is an excellent upgrade for tuned VR38 engines. This Intake is a bolt on replacement to the Oem part. It will fit with the stock Thottle bodies!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eGT-R | R35 Zenki | 2007-2010 | TT | VR38DETT | V6\u003cbr\u003eGT-R | R35 Chuki | 2010-2016 | TT | VR38DETT | V6\u003cbr\u003eGT-R | R35 Kouki | 2016-2018 | TT | VR38DETT | V6\u003c!--split--\u003e"}

{"id":1954622144609,"title":"HKS - HIPERMAX IV GT Coilover Kit - Lexus HS250h ANF10","handle":"hks-hipermax-iv-gt-coilovers-lexus-hs250h-anf10-80230-at012","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AT012\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT012\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -47mm (Max Adjustment: 0 ~ -68\u003cbr\u003eSpring Rate: 5kg\u003cbr\u003eRebound Setting: 48.1Nm\u003cbr\u003eCompression Setting: 14.7Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -49mm (Max Adjustment: 0 ~ -71\u003cbr\u003eSpring Rate: F=49(5)\/R=49(5)kg\u003cbr\u003eRebound Setting: 2.84Nm\u003cbr\u003eCompression Setting: 1.77Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Rear:Separate type\u003cbr\u003eThe HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eHS250h | ANF10 | 2009-2018 | H | 2AZ-FXE | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2025-10-06T17:16:27+08:00","created_at":"2019-02-08T13:12:47+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","202000x30y1z0","coilover-kits","coilovers-and-springs","CTA96","dampening-and-height-adjustable","hks","hs250h-anf10-2009-2018-h-2az-fxe-i4","JP1","lexus","ws122"],"price":158779,"price_min":158779,"price_max":158779,"available":true,"price_varies":false,"compare_at_price":191300,"compare_at_price_min":191300,"compare_at_price_max":191300,"compare_at_price_varies":false,"variants":[{"id":18519670456417,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AT012","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Lexus HS250h ANF10","public_title":null,"options":["Default Title"],"price":158779,"weight":30000,"compare_at_price":191300,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/HKS_GT4.JPG_5b22ac28-f182-42dd-8609-42f5a26e6e50.jpg?v=1710170693"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/HKS_GT4.JPG_5b22ac28-f182-42dd-8609-42f5a26e6e50.jpg?v=1710170693","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Lexus HS250h ANF10 - 80230-AT012 - RZCrewGarage","id":25814839034038,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/HKS_GT4.JPG_5b22ac28-f182-42dd-8609-42f5a26e6e50.jpg?v=1710170693"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/HKS_GT4.JPG_5b22ac28-f182-42dd-8609-42f5a26e6e50.jpg?v=1710170693","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AT012\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AT012\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -47mm (Max Adjustment: 0 ~ -68\u003cbr\u003eSpring Rate: 5kg\u003cbr\u003eRebound Setting: 48.1Nm\u003cbr\u003eCompression Setting: 14.7Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -49mm (Max Adjustment: 0 ~ -71\u003cbr\u003eSpring Rate: F=49(5)\/R=49(5)kg\u003cbr\u003eRebound Setting: 2.84Nm\u003cbr\u003eCompression Setting: 1.77Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Rear:Separate type\u003cbr\u003eThe HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eHS250h | ANF10 | 2009-2018 | H | 2AZ-FXE | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":1954621358177,"title":"HKS - HIPERMAX IV GT Coilover Kit - Suzuki Swift ZC72S","handle":"hks-hipermax-iv-gt-coilovers-suzuki-swift-zc72s-80230-as001","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AS001\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AS001\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -43mm (Max Adjustment: 0 ~ -77\u003cbr\u003eSpring Rate: 5kg\u003cbr\u003eRebound Setting: 44.1Nm\u003cbr\u003eCompression Setting: 17.7Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -30mm (Max Adjustment: -16 ~ -57\u003cbr\u003eSpring Rate: F=49(5)\/R=39(4)kg\u003cbr\u003eRebound Setting: 2.26Nm\u003cbr\u003eCompression Setting: 1.47Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: 2WD. Rear:Separate type. Height data is based on ZC32S.\u003cbr\u003eThe HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSwift | ZC72S | 2010-2018 | NA | K12B | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2025-10-06T17:16:05+08:00","created_at":"2019-02-08T13:12:29+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2010","2011","2012","2013","2014","2015","2016","2017","2018","202000x30y1z0","coilover-kits","coilovers-and-springs","CTA96","dampening-and-height-adjustable","hks","JP1","suzuki","swift-zc72s-2010-2018-na-k12b-i4","ws122"],"price":158779,"price_min":158779,"price_max":158779,"available":true,"price_varies":false,"compare_at_price":191300,"compare_at_price_min":191300,"compare_at_price_max":191300,"compare_at_price_varies":false,"variants":[{"id":18519663149153,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AS001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV GT Coilover Kit - Suzuki Swift ZC72S","public_title":null,"options":["Default Title"],"price":158779,"weight":30000,"compare_at_price":191300,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/HKS_GT4.JPG_d366d8d2-093a-4834-8bb7-f433628a8be0.jpg?v=1710170666"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/HKS_GT4.JPG_d366d8d2-093a-4834-8bb7-f433628a8be0.jpg?v=1710170666","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Suzuki Swift ZC72S - 80230-AS001 - RZCrewGarage","id":25814837199030,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/HKS_GT4.JPG_d366d8d2-093a-4834-8bb7-f433628a8be0.jpg?v=1710170666"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/HKS_GT4.JPG_d366d8d2-093a-4834-8bb7-f433628a8be0.jpg?v=1710170666","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AS001\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AS001\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -43mm (Max Adjustment: 0 ~ -77\u003cbr\u003eSpring Rate: 5kg\u003cbr\u003eRebound Setting: 44.1Nm\u003cbr\u003eCompression Setting: 17.7Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -30mm (Max Adjustment: -16 ~ -57\u003cbr\u003eSpring Rate: F=49(5)\/R=39(4)kg\u003cbr\u003eRebound Setting: 2.26Nm\u003cbr\u003eCompression Setting: 1.47Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: 2WD. Rear:Separate type. Height data is based on ZC32S.\u003cbr\u003eThe HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSwift | ZC72S | 2010-2018 | NA | K12B | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":7547115503798,"title":"HKS - HIPERMAX R Coilover Kit - Nissan Fairlady Z Z34","handle":"hks-hipermax-r-coilovers-nissan-fairlady-z-z34-80310-an006","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80310-AN006\u003cbr\u003eType: R\u003cbr\u003eRef: 80310-AN006\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -20mm (Max Adjustment: (0 - -30)\u003cbr\u003eSpring Rate: 16kg\u003cbr\u003eRebound Setting: 155.9Nm\u003cbr\u003eCompression Setting: 48.6Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -19mm (Max Adjustment: (-1 - -56)\u003cbr\u003eSpring Rate: 18kg\u003cbr\u003eRebound Setting: 6.87Nm\u003cbr\u003eCompression Setting: 3.88Nm\u003cbr\u003e \u003cbr\u003eThis set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV SP release this series has unified the many different street based Hipermax merits and further improved this new flagship series as the Ultimate All-Rounder. Many aspects similar to the Hipermax S Series yet developed for more serious motorsport application. Exclusive SRF (Super Response Fluid), LVS (Low Vibration Spring) and Spring Retainer along with increased spring rates, revised spring changes, wider implementation of helper springs and full Pillow Ball upper mounts sets these apart from the Hipermax S Series.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eFairlady Z | Z34 Kouki | 2012-2018 | NA | VQ37VHR | V6\u003cbr\u003eFairlady Z | Z34 Zenki | 2008-2012 | NA | VQ37VHR | V6\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2023-01-27T14:36:07+08:00","created_at":"2023-01-27T14:09:08+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","288000x20y1z0","coilover-kits","coilovers-and-springs","CTA97","dampening-and-height-adjustable","fairlady-z-z34-kouki-2012-2018-na-vq37vhr-v6","fairlady-z-z34-zenki-2008-2012-na-vq37vhr-v6","hks","JP1","nissan","ws112"],"price":258819,"price_min":258819,"price_max":258819,"available":true,"price_varies":false,"compare_at_price":278300,"compare_at_price_min":278300,"compare_at_price_max":278300,"compare_at_price_varies":false,"variants":[{"id":42073728909494,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80310-AN006","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX R Coilover Kit - Nissan Fairlady Z Z34","public_title":null,"options":["Default Title"],"price":258819,"weight":30000,"compare_at_price":278300,"inventory_quantity":49,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-hipermax-r-coilover-kit-nissan-fairlady-z-z34-rzcrew.jpg?v=1710318374"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-hipermax-r-coilover-kit-nissan-fairlady-z-z34-rzcrew.jpg?v=1710318374","options":["Title"],"media":[{"alt":"HKS - HIPERMAX R Coilovers - Nissan Fairlady Z Z34 - 80310-AN006 - RZCrewGarage","id":27153358323894,"position":1,"preview_image":{"aspect_ratio":1.21,"height":496,"width":600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-hipermax-r-coilover-kit-nissan-fairlady-z-z34-rzcrew.jpg?v=1710318374"},"aspect_ratio":1.21,"height":496,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-hipermax-r-coilover-kit-nissan-fairlady-z-z34-rzcrew.jpg?v=1710318374","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80310-AN006\u003cbr\u003eType: R\u003cbr\u003eRef: 80310-AN006\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -20mm (Max Adjustment: (0 - -30)\u003cbr\u003eSpring Rate: 16kg\u003cbr\u003eRebound Setting: 155.9Nm\u003cbr\u003eCompression Setting: 48.6Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -19mm (Max Adjustment: (-1 - -56)\u003cbr\u003eSpring Rate: 18kg\u003cbr\u003eRebound Setting: 6.87Nm\u003cbr\u003eCompression Setting: 3.88Nm\u003cbr\u003e \u003cbr\u003eThis set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV SP release this series has unified the many different street based Hipermax merits and further improved this new flagship series as the Ultimate All-Rounder. Many aspects similar to the Hipermax S Series yet developed for more serious motorsport application. Exclusive SRF (Super Response Fluid), LVS (Low Vibration Spring) and Spring Retainer along with increased spring rates, revised spring changes, wider implementation of helper springs and full Pillow Ball upper mounts sets these apart from the Hipermax S Series.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eFairlady Z | Z34 Kouki | 2012-2018 | NA | VQ37VHR | V6\u003cbr\u003eFairlady Z | Z34 Zenki | 2008-2012 | NA | VQ37VHR | V6\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":7547115307190,"title":"HKS - HIPERMAX R Coilover Kit - Nissan GT-R R35","handle":"hks-hipermax-r-coilovers-nissan-gt-r-r35-80310-an001","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80310-AN001\u003cbr\u003eType: R\u003cbr\u003eRef: 80310-AN001\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -12mm (Max Adjustment: (-2 - -58)\u003cbr\u003eSpring Rate: 20kg\u003cbr\u003eRebound Setting: 226.6Nm\u003cbr\u003eCompression Setting: 51.5Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -16mm (Max Adjustment: (0 - -60)\u003cbr\u003eSpring Rate: 16kg\u003cbr\u003eRebound Setting: 7.11Nm\u003cbr\u003eCompression Setting: 7.21Nm\u003cbr\u003e \u003cbr\u003eThis set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV SP release this series has unified the many different street based Hipermax merits and further improved this new flagship series as the Ultimate All-Rounder. Many aspects similar to the Hipermax S Series yet developed for more serious motorsport application. Exclusive SRF (Super Response Fluid), LVS (Low Vibration Spring) and Spring Retainer along with increased spring rates, revised spring changes, wider implementation of helper springs and full Pillow Ball upper mounts sets these apart from the Hipermax S Series.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eGT-R | R35 Chuki | 2010-2016 | TT | VR38DETT | V6\u003cbr\u003eGT-R | R35 Kouki | 2016-2018 | TT | VR38DETT | V6\u003cbr\u003eGT-R | R35 Zenki | 2007-2010 | TT | VR38DETT | V6\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2023-01-27T14:36:06+08:00","created_at":"2023-01-27T14:08:58+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2010","2011","2012","2013","2014","2015","2016","2017","2018","338000x20y1z0","coilover-kits","coilovers-and-springs","CTA97","dampening-and-height-adjustable","gt-r-r35-chuki-2010-2016-tt-vr38dett-v6","gt-r-r35-kouki-2016-2018-tt-vr38dett-v6","gt-r-r35-zenki-2007-2010-tt-vr38dett-v6","hks","JP1","nissan","ws112"],"price":303738,"price_min":303738,"price_max":303738,"available":true,"price_varies":false,"compare_at_price":326600,"compare_at_price_min":326600,"compare_at_price_max":326600,"compare_at_price_varies":false,"variants":[{"id":42073728745654,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80310-AN001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX R Coilover Kit - Nissan GT-R R35","public_title":null,"options":["Default Title"],"price":303738,"weight":30000,"compare_at_price":326600,"inventory_quantity":49,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-hipermax-r-coilover-kit-nissan-gt-r-r35-rzcrew.jpg?v=1710318374"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-hipermax-r-coilover-kit-nissan-gt-r-r35-rzcrew.jpg?v=1710318374","options":["Title"],"media":[{"alt":"HKS - HIPERMAX R Coilovers - Nissan GT-R R35 - 80310-AN001 - RZCrewGarage","id":27153356390582,"position":1,"preview_image":{"aspect_ratio":1.21,"height":496,"width":600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-hipermax-r-coilover-kit-nissan-gt-r-r35-rzcrew.jpg?v=1710318374"},"aspect_ratio":1.21,"height":496,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-hipermax-r-coilover-kit-nissan-gt-r-r35-rzcrew.jpg?v=1710318374","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80310-AN001\u003cbr\u003eType: R\u003cbr\u003eRef: 80310-AN001\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -12mm (Max Adjustment: (-2 - -58)\u003cbr\u003eSpring Rate: 20kg\u003cbr\u003eRebound Setting: 226.6Nm\u003cbr\u003eCompression Setting: 51.5Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -16mm (Max Adjustment: (0 - -60)\u003cbr\u003eSpring Rate: 16kg\u003cbr\u003eRebound Setting: 7.11Nm\u003cbr\u003eCompression Setting: 7.21Nm\u003cbr\u003e \u003cbr\u003eThis set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV SP release this series has unified the many different street based Hipermax merits and further improved this new flagship series as the Ultimate All-Rounder. Many aspects similar to the Hipermax S Series yet developed for more serious motorsport application. Exclusive SRF (Super Response Fluid), LVS (Low Vibration Spring) and Spring Retainer along with increased spring rates, revised spring changes, wider implementation of helper springs and full Pillow Ball upper mounts sets these apart from the Hipermax S Series.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eGT-R | R35 Chuki | 2010-2016 | TT | VR38DETT | V6\u003cbr\u003eGT-R | R35 Kouki | 2016-2018 | TT | VR38DETT | V6\u003cbr\u003eGT-R | R35 Zenki | 2007-2010 | TT | VR38DETT | V6\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":6575407759542,"title":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mazda CX-7 ER3P (2006-2018)","handle":"hks-super-sqv-iv-sequential-blow-off-valve-kit-mazda-cx-7-er3p-2006-2018-71008-az008","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- GG3P, BK3P: Only for Mazdaspeed Models\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMazda - CX-7 - ER3P (2009-2018) L3-VDT\u003cbr\u003eMazda - CX-7 - ER3P (2006-2009) L3-VDT\u003c!--split--\u003e","published_at":"2021-03-13T16:34:19+08:00","created_at":"2021-03-13T16:34:19+08:00","vendor":"HKS","type":"Universal Blow Off Valves","tags":["2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","35000x30y1z0","CTA362","cx-7-er3p-2006-2009-tc-l3-vdt-i4","cx-7-er3p-2009-2018-tc-l3-vdt-i4","forced-induction","hks","mazda","universal-blow-off-valves","ws122"],"price":27141,"price_min":27141,"price_max":27141,"available":true,"price_varies":false,"compare_at_price":32700,"compare_at_price_min":32700,"compare_at_price_max":32700,"compare_at_price_varies":false,"variants":[{"id":39354327564470,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"71008-AZ008","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mazda CX-7 ER3P (2006-2018)","public_title":null,"options":["Default Title"],"price":27141,"weight":3000,"compare_at_price":32700,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mazda-cx-7-er3p-2006-2018-rzcrew.jpg?v=1710326212"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mazda-cx-7-er3p-2006-2018-rzcrew.jpg?v=1710326212","options":["Title"],"media":[{"alt":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mazda CX-7 ER3P (2006-2018) - 71008-AZ008 - Rzcrewgarage","id":22888432861366,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mazda-cx-7-er3p-2006-2018-rzcrew.jpg?v=1710326212"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mazda-cx-7-er3p-2006-2018-rzcrew.jpg?v=1710326212","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- GG3P, BK3P: Only for Mazdaspeed Models\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMazda - CX-7 - ER3P (2009-2018) L3-VDT\u003cbr\u003eMazda - CX-7 - ER3P (2006-2009) L3-VDT\u003c!--split--\u003e"}

{"id":6575407792310,"title":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mazda MPV LY3P (2006-2018)","handle":"hks-super-sqv-iv-sequential-blow-off-valve-kit-mazda-mpv-ly3p-2006-2018-71008-az008","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- GG3P, BK3P: Only for Mazdaspeed Models\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMazda - MPV - LY3P (2007-2018) L3-VDT\u003cbr\u003eMazda - MPV - LY3P (2006-2007) L3-VDT\u003c!--split--\u003e","published_at":"2021-03-13T16:34:20+08:00","created_at":"2021-03-13T16:34:21+08:00","vendor":"HKS","type":"Universal Blow Off Valves","tags":["2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","35000x30y1z0","CTA362","forced-induction","hks","mazda","mpv-ly3p-kouki-2007-2018-tc-l3-vdt-i4","mpv-ly3p-zenki-2006-2007-tc-l3-vdt-i4","universal-blow-off-valves","ws122"],"price":27141,"price_min":27141,"price_max":27141,"available":true,"price_varies":false,"compare_at_price":32700,"compare_at_price_min":32700,"compare_at_price_max":32700,"compare_at_price_varies":false,"variants":[{"id":39354327597238,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"71008-AZ008","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mazda MPV LY3P (2006-2018)","public_title":null,"options":["Default Title"],"price":27141,"weight":3000,"compare_at_price":32700,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mazda-mpv-ly3p-2006-2018-rzcrew.jpg?v=1710326206"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mazda-mpv-ly3p-2006-2018-rzcrew.jpg?v=1710326206","options":["Title"],"media":[{"alt":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mazda MPV LY3P (2006-2018) - 71008-AZ008 - Rzcrewgarage","id":22888432992438,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mazda-mpv-ly3p-2006-2018-rzcrew.jpg?v=1710326206"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mazda-mpv-ly3p-2006-2018-rzcrew.jpg?v=1710326206","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- GG3P, BK3P: Only for Mazdaspeed Models\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMazda - MPV - LY3P (2007-2018) L3-VDT\u003cbr\u003eMazda - MPV - LY3P (2006-2007) L3-VDT\u003c!--split--\u003e"}

{"id":6572369117366,"title":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Galant Fortis CY4A (2007-2018)","handle":"hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-galant-fortis-cy4a-2007-2018-71008-am016","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Galant Fortis - CY4A (2007-2009) 4B11\u003cbr\u003eMitsubishi - Galant Fortis - CY4A (2009-2018) 4B11\u003c!--split--\u003e","published_at":"2021-03-12T11:16:53+08:00","created_at":"2021-03-12T11:16:54+08:00","vendor":"Hks","type":"Universal Blow Off Valves","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","38800x30y1z0","CTA362","forced-induction","galant-fortis-cy4a-2007-2009-na-4b11-i4","galant-fortis-cy4a-2009-2018-na-4b11-i4","hks","mitsubishi","universal-blow-off-valves","ws123"],"price":29766,"price_min":29766,"price_max":29766,"available":true,"price_varies":false,"compare_at_price":36300,"compare_at_price_min":36300,"compare_at_price_max":36300,"compare_at_price_varies":false,"variants":[{"id":39347321307318,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"71008-AM016","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Galant Fortis CY4A (2007-2018)","public_title":null,"options":["Default Title"],"price":29766,"weight":3000,"compare_at_price":36300,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-galant-fortis-cy4a-2007-2018-rzcrew.jpg?v=1710326216"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-galant-fortis-cy4a-2007-2018-rzcrew.jpg?v=1710326216","options":["Title"],"media":[{"alt":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Galant Fortis CY4A (2007-2018) - 71008-AM016 - Rzcrewgarage","id":22330846937270,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-galant-fortis-cy4a-2007-2018-rzcrew.jpg?v=1710326216"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-galant-fortis-cy4a-2007-2018-rzcrew.jpg?v=1710326216","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Galant Fortis - CY4A (2007-2009) 4B11\u003cbr\u003eMitsubishi - Galant Fortis - CY4A (2009-2018) 4B11\u003c!--split--\u003e"}

{"id":6570251845814,"title":"HKS Super SQV IV Sequential Blow Off Valve Kit Chamber Replacement Type - Nissan GT-R R35 (2007-2021)","handle":"hks-super-sqv-iv-sequential-blow-off-valve-kit-chamber-replacement-type-nissan-gt-r-r35-2007-2021-71008-an027","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit x2\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eThis is the New release of the popular HKS SQV and reached now its IV Edition. The Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles.To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, re-circulation fittings and re-circulation kits. \u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - GT-R - R35 (2016-2021) VR38DETT\u003cbr\u003eNissan - GT-R - R35 (2007-2010) VR38DETT\u003cbr\u003eNissan - GT-R - R35 (2010-2016) VR38DETT\u003c!--split--\u003e","published_at":"2021-03-11T16:54:56+08:00","created_at":"2021-03-11T16:54:57+08:00","vendor":"HKS","type":"Universal Blow Off Valves","tags":["138000x30y1z0","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","2019","2020","2021","CTA371","forced-induction","gt-r-r35-chuki-2010-2016-tt-vr38dett-v6","gt-r-r35-kouki-2016-2018-tt-vr38dett-v6","gt-r-r35-zenki-2007-2010-tt-vr38dett-v6","hks","nissan","universal-blow-off-valves","ws122"],"price":107070,"price_min":107070,"price_max":107070,"available":true,"price_varies":false,"compare_at_price":129000,"compare_at_price_min":129000,"compare_at_price_max":129000,"compare_at_price_varies":false,"variants":[{"id":39339582390454,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"71008-AN027","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Super SQV IV Sequential Blow Off Valve Kit Chamber Replacement Type - Nissan GT-R R35 (2007-2021)","public_title":null,"options":["Default Title"],"price":107070,"weight":3000,"compare_at_price":129000,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-chamber-replacement-type-nissan-gt-r-r35-2007-2021-rzcrew.jpg?v=1710326280"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-chamber-replacement-type-nissan-gt-r-r35-2007-2021-rzcrew.jpg?v=1710326280","options":["Title"],"media":[{"alt":"HKS Super SQV IV Sequential Blow Off Valve Kit Chamber Replacement Type - Nissan GT-R R35 (2007-2021) - 71008-AN027 - Rzcrewgarage","id":22330877706422,"position":1,"preview_image":{"aspect_ratio":1.5,"height":1600,"width":2400,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-chamber-replacement-type-nissan-gt-r-r35-2007-2021-rzcrew.jpg?v=1710326280"},"aspect_ratio":1.5,"height":1600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-chamber-replacement-type-nissan-gt-r-r35-2007-2021-rzcrew.jpg?v=1710326280","width":2400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit x2\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eThis is the New release of the popular HKS SQV and reached now its IV Edition. The Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles.To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, re-circulation fittings and re-circulation kits. \u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - GT-R - R35 (2016-2021) VR38DETT\u003cbr\u003eNissan - GT-R - R35 (2007-2010) VR38DETT\u003cbr\u003eNissan - GT-R - R35 (2010-2016) VR38DETT\u003c!--split--\u003e"}

{"id":6570251813046,"title":"HKS Super SQV IV Sequential Blow Off Valve Kit OEM Bypass Valve Replacement Type - Nissan GT-R R35 (2007-2021)","handle":"hks-super-sqv-iv-sequential-blow-off-valve-kit-oem-bypass-valve-replacement-type-nissan-gt-r-r35-2007-2021-71008-an029","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit x2\u003cbr\u003e-Vehicle specific pipes\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eThis is the New release of the popular HKS SQV and reached now its IV Edition. The Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles.To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure.The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, re-circulation fittings and re-circulation kits.Upon purchasing please state the car from the compatibility list that you would like to have the HKS Super SQV IV Kit for.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - GT-R - R35 (2016-2021) VR38DETT\u003cbr\u003eNissan - GT-R - R35 (2007-2010) VR38DETT\u003cbr\u003eNissan - GT-R - R35 (2010-2016) VR38DETT\u003c!--split--\u003e","published_at":"2021-03-11T16:54:55+08:00","created_at":"2021-03-11T16:54:56+08:00","vendor":"HKS","type":"Universal Blow Off Valves","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","2019","2020","2021","60000x30y1z0","CTA370","forced-induction","gt-r-r35-chuki-2010-2016-tt-vr38dett-v6","gt-r-r35-kouki-2016-2018-tt-vr38dett-v6","gt-r-r35-zenki-2007-2010-tt-vr38dett-v6","hks","nissan","universal-blow-off-valves","ws123"],"price":46002,"price_min":46002,"price_max":46002,"available":true,"price_varies":false,"compare_at_price":56100,"compare_at_price_min":56100,"compare_at_price_max":56100,"compare_at_price_varies":false,"variants":[{"id":39339582357686,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"71008-AN029","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Super SQV IV Sequential Blow Off Valve Kit OEM Bypass Valve Replacement Type - Nissan GT-R R35 (2007-2021)","public_title":null,"options":["Default Title"],"price":46002,"weight":3000,"compare_at_price":56100,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-oem-bypass-valve-replacement-type-nissan-gt-r-r35-2007-2021-rzcrew.jpg?v=1710326280"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-oem-bypass-valve-replacement-type-nissan-gt-r-r35-2007-2021-rzcrew.jpg?v=1710326280","options":["Title"],"media":[{"alt":"HKS Super SQV IV Sequential Blow Off Valve Kit OEM Bypass Valve Replacement Type - Nissan GT-R R35 (2007-2021) - 71008-AN029 - Rzcrewgarage","id":22330877608118,"position":1,"preview_image":{"aspect_ratio":1.5,"height":1600,"width":2400,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-oem-bypass-valve-replacement-type-nissan-gt-r-r35-2007-2021-rzcrew.jpg?v=1710326280"},"aspect_ratio":1.5,"height":1600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-oem-bypass-valve-replacement-type-nissan-gt-r-r35-2007-2021-rzcrew.jpg?v=1710326280","width":2400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit x2\u003cbr\u003e-Vehicle specific pipes\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eThis is the New release of the popular HKS SQV and reached now its IV Edition. The Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles.To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure.The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, re-circulation fittings and re-circulation kits.Upon purchasing please state the car from the compatibility list that you would like to have the HKS Super SQV IV Kit for.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - GT-R - R35 (2016-2021) VR38DETT\u003cbr\u003eNissan - GT-R - R35 (2007-2010) VR38DETT\u003cbr\u003eNissan - GT-R - R35 (2010-2016) VR38DETT\u003c!--split--\u003e"}