2012

{"id":1911452729441,"title":"Link Engine Management - G4+ Thunder - Standalone ECU","handle":"link-engine-management-g4-thunder-standalone-ecu-g4-t","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Link Engine Management\u003cbr\u003eReference Number: G4+T\u003cbr\u003eIntake Type: Standalone\u003cbr\u003e\u003cbr\u003eThe Thunder is a high end advanced level ECU able to manage up to 8 Cylinders, 4 Rotors engine with Peak and Hold injection and direct spark. Its casing is rated IP67 for a full dust and waterproof efficiency in any driving situation. It makes it perfect for extremely complicated tune on up to 8 cylinders engine which comes with Variable valves timing and Dual E-throttle. The G4+ Thunder runs the same microprocessor and firmware as our the G4+ Extreem which makes it ultra fast avoiding any lag during injection time resulting in premature engine failure. The firmware is also perfect for its stability avoiding erratic starts and multiple retune after its initial tuning such as piggy back ecu and other standalone Brands. In comparaison with the Xtreem ECU, the Thunder features 2x Onboard wideband lambda control, 2x E-throttle body controller, 2 EGT thermocouple inputs and a real cool 3 axis accelerometer on top of the Xtreem features such as cruise control, Advanced closed loop lambda strategy and dual bank lambda control, anti lag, rolling anti lag control, full gear shift, launch control, built in trigger oscilloscope, onboard knock control, idle valves solenoid or stepper motor control and Rotary oil metering pump control. It is really one of our favourite standalone ECU for most tuner engine needing a stable and highly efficient tuning features. Install it, tune it once and race for years!\u003cbr\u003e\u003cbr\u003eWHY CHOOSING THE Thunder:\u003cbr\u003e\u003cbr\u003e- You run a high compression atmospheric engine OR Boosted 8 cylinders\/4 rotors engine.\u003cbr\u003e- You need a refine control over your lambda sensor\u003cbr\u003e- You need full control over 2 E-throttle Bodies\u003cbr\u003e- You want to cut down on cost using its awesome features!\u003cbr\u003e- You do not want to purchase additional sensors to run it!\u003cbr\u003e- If you reply a \" YES \" To all this question than the Thunder is your choice!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e","published_at":"2018-12-10T23:07:48+08:00","created_at":"2018-12-10T23:07:50+08:00","vendor":"Link Engine Management","type":"ECU","tags":["1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2-cylinders","2-rotors","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","3-cylinders","3-rotors","4-cylinders","4-rotors","5-cylinders","6-cylinders","8-cylinders","alfa-romeo","aston-martin","audi","bmw","bmw-mini","chevrolet","citroen","civic-fd2-2007-2010-na-k20z2-i4","daihatsu","e-throttle","ecu","ferrari","fiat","ford","honda","hyundai","kia","lexus","link-engine-management","lotus","mazda","mercedes-benz","mitsubishi","nissan","opel","peak-and-hold-injection","peugeot","porsche","renault","seat","sg1","skoda","standalone","subaru","suzuki","throttle-by-cable","toyota","Universal","volkswagen","volvo","ws10"],"price":283600,"price_min":283600,"price_max":283600,"available":true,"price_varies":false,"compare_at_price":283600,"compare_at_price_min":283600,"compare_at_price_max":283600,"compare_at_price_varies":false,"variants":[{"id":18215217561697,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"G4+T","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Link Engine Management - G4+ Thunder - Standalone ECU","public_title":null,"options":["Default Title"],"price":283600,"weight":2000,"compare_at_price":283600,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/G4_T.jpg?v=1730955091"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/G4_T.jpg?v=1730955091","options":["Title"],"media":[{"alt":"Link Engine Management - G4+ Thunder - Standalone ECU - G4+T","id":28744436482230,"position":1,"preview_image":{"aspect_ratio":1.127,"height":568,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/G4_T.jpg?v=1730955091"},"aspect_ratio":1.127,"height":568,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/G4_T.jpg?v=1730955091","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Link Engine Management\u003cbr\u003eReference Number: G4+T\u003cbr\u003eIntake Type: Standalone\u003cbr\u003e\u003cbr\u003eThe Thunder is a high end advanced level ECU able to manage up to 8 Cylinders, 4 Rotors engine with Peak and Hold injection and direct spark. Its casing is rated IP67 for a full dust and waterproof efficiency in any driving situation. It makes it perfect for extremely complicated tune on up to 8 cylinders engine which comes with Variable valves timing and Dual E-throttle. The G4+ Thunder runs the same microprocessor and firmware as our the G4+ Extreem which makes it ultra fast avoiding any lag during injection time resulting in premature engine failure. The firmware is also perfect for its stability avoiding erratic starts and multiple retune after its initial tuning such as piggy back ecu and other standalone Brands. In comparaison with the Xtreem ECU, the Thunder features 2x Onboard wideband lambda control, 2x E-throttle body controller, 2 EGT thermocouple inputs and a real cool 3 axis accelerometer on top of the Xtreem features such as cruise control, Advanced closed loop lambda strategy and dual bank lambda control, anti lag, rolling anti lag control, full gear shift, launch control, built in trigger oscilloscope, onboard knock control, idle valves solenoid or stepper motor control and Rotary oil metering pump control. It is really one of our favourite standalone ECU for most tuner engine needing a stable and highly efficient tuning features. Install it, tune it once and race for years!\u003cbr\u003e\u003cbr\u003eWHY CHOOSING THE Thunder:\u003cbr\u003e\u003cbr\u003e- You run a high compression atmospheric engine OR Boosted 8 cylinders\/4 rotors engine.\u003cbr\u003e- You need a refine control over your lambda sensor\u003cbr\u003e- You need full control over 2 E-throttle Bodies\u003cbr\u003e- You want to cut down on cost using its awesome features!\u003cbr\u003e- You do not want to purchase additional sensors to run it!\u003cbr\u003e- If you reply a \" YES \" To all this question than the Thunder is your choice!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e"}

{"id":1911452696673,"title":"Link Engine Management - G4+ Xtreme - Standalone ECU","handle":"link-engine-management-g4-xtreme-standalone-ecu-g4-x","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Link Engine Management\u003cbr\u003eReference Number: G4+X\u003cbr\u003eIntake Type: Standalone\u003cbr\u003e\u003cbr\u003eThe Xtreem is a high end advanced level ECU able to manage up to 8 Cylinders, 4 Rotors engine with peak and hold injection and direct spark. Its casing is rated IP67 for a full dust and waterproof efficiency in any driving situation. It makes it perfect for extremely complicated tune on up to 8 cylinders engine which comes with Variable valves timing. The G4+ Xtreem runs the same microprocessor and firmware as our the G4+ Extreem which makes it ultra fast avoiding any lag during injection time resulting in premature engine failure. The firmware is also perfect for its stability avoiding erratic starts and multiple retune after its initial tuning such as piggy back ecu and other standalone Brands. In comparaison with the Storm ECU, the Xtreem features a lot more interesting options such as peak and hold Injection, full E-throttle control (x1), cruise control, Advanced closed loop lambda strategy and dual bank lambda control on top of the Storm anti lag, rolling anti lag control, full gear shift, launch control, built in trigger oscilloscope, onboard knock control, idle valves solenoid or stepper motor control and Rotary oil metering pump control. It is really one of our favourite standalone ECU for most tuner engine needing a stable and highly efficient tuning features. Install it, tune it once and race for years!\u003cbr\u003e\u003cbr\u003eWHY CHOOSING THE Xtreem:\u003cbr\u003e\u003cbr\u003e- You run a high compression atmospheric engine OR Boosted 8 cylinders\/4 rotors engine.\u003cbr\u003e- You run a peak and hold Injection setup and a single E-throttle body.\u003cbr\u003e- You want to cut down on cost using its awesome features!\u003cbr\u003e- You do not want to purchase additional sensors to run it!\u003cbr\u003e- If you reply a \" YES \" To all this question than the Xtreem is your choice!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e","published_at":"2018-12-10T23:07:44+08:00","created_at":"2018-12-10T23:07:45+08:00","vendor":"Link Engine Management","type":"ECU","tags":["1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2-cylinders","2-rotors","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","3-cylinders","3-rotors","4-cylinders","4-rotors","5-cylinders","6-cylinders","8-cylinders","alfa-romeo","aston-martin","audi","bmw","bmw-mini","chevrolet","citroen","civic-fd2-2007-2010-na-k20z2-i4","daihatsu","e-throttle","ecu","ferrari","fiat","ford","honda","hyundai","kia","lexus","link-engine-management","lotus","mazda","mercedes-benz","mitsubishi","nissan","opel","peak-and-hold-injection","peugeot","porsche","renault","seat","sg1","skoda","standalone","subaru","suzuki","throttle-by-cable","toyota","Universal","volkswagen","volvo","ws10"],"price":223100,"price_min":223100,"price_max":223100,"available":true,"price_varies":false,"compare_at_price":223100,"compare_at_price_min":223100,"compare_at_price_max":223100,"compare_at_price_varies":false,"variants":[{"id":18215217528929,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"G4+X","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Link Engine Management - G4+ Xtreme - Standalone ECU","public_title":null,"options":["Default Title"],"price":223100,"weight":2000,"compare_at_price":223100,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/G4_X.jpg?v=1700044157"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/G4_X.jpg?v=1700044157","options":["Title"],"media":[{"alt":"Link Engine Management - G4+ Xtreme - Standalone ECU - G4+X","id":26829685686454,"position":1,"preview_image":{"aspect_ratio":1.064,"height":282,"width":300,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/G4_X.jpg?v=1700044157"},"aspect_ratio":1.064,"height":282,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/G4_X.jpg?v=1700044157","width":300}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Link Engine Management\u003cbr\u003eReference Number: G4+X\u003cbr\u003eIntake Type: Standalone\u003cbr\u003e\u003cbr\u003eThe Xtreem is a high end advanced level ECU able to manage up to 8 Cylinders, 4 Rotors engine with peak and hold injection and direct spark. Its casing is rated IP67 for a full dust and waterproof efficiency in any driving situation. It makes it perfect for extremely complicated tune on up to 8 cylinders engine which comes with Variable valves timing. The G4+ Xtreem runs the same microprocessor and firmware as our the G4+ Extreem which makes it ultra fast avoiding any lag during injection time resulting in premature engine failure. The firmware is also perfect for its stability avoiding erratic starts and multiple retune after its initial tuning such as piggy back ecu and other standalone Brands. In comparaison with the Storm ECU, the Xtreem features a lot more interesting options such as peak and hold Injection, full E-throttle control (x1), cruise control, Advanced closed loop lambda strategy and dual bank lambda control on top of the Storm anti lag, rolling anti lag control, full gear shift, launch control, built in trigger oscilloscope, onboard knock control, idle valves solenoid or stepper motor control and Rotary oil metering pump control. It is really one of our favourite standalone ECU for most tuner engine needing a stable and highly efficient tuning features. Install it, tune it once and race for years!\u003cbr\u003e\u003cbr\u003eWHY CHOOSING THE Xtreem:\u003cbr\u003e\u003cbr\u003e- You run a high compression atmospheric engine OR Boosted 8 cylinders\/4 rotors engine.\u003cbr\u003e- You run a peak and hold Injection setup and a single E-throttle body.\u003cbr\u003e- You want to cut down on cost using its awesome features!\u003cbr\u003e- You do not want to purchase additional sensors to run it!\u003cbr\u003e- If you reply a \" YES \" To all this question than the Xtreem is your choice!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e"}

{"id":8147564855478,"title":"Link Engine Management MXS Strada 5\" Dash - Street Edition","handle":"link-engine-management-mxs-strada-5-dash-street-edition-100-0168","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Link Engine Management\u003cbr\u003eReference Number: 100-0168\u003cbr\u003eH7Type: Dash\u003cbr\u003e\u003cbr\u003eThe Link MXS Strada Street Edition dash features customisable shift lights, six street icons and a high contrast 5-inch TFT screen display. Visual quality is always optimal as the ambient light sensor auto-adjusts the brightness of the display. \u003cbr\u003e\u003cbr\u003e\n\nThe 10 multi-coloured RGB shift lights on the MXS Strada can be customised to your liking to define the RPM threshold for each single gear. There are also 6 Street Icons located to the side of the screen. These include an indicator light, headlight, high beam, check engine, oil pressure warning light and temperature warning light.\u003cbr\u003e\u003cbr\u003e\n\nThe dash is extremely easy to use, with buttons on the side to navigate through a library of preset display styles, depending on what information you want to see and in what layout. The screen can display all real-time information reading from the ECU such as RPM, speed, water temperature, oil pressure and much more. \u003cbr\u003e\u003cbr\u003e\n\nThe Link MXS connects directly to your Link ECU via the pin kit and wiring provided in the box. To use with plugin ECU’s - CANPCB and CANF connectors will be required (Purchased separately).\u003cbr\u003e\n\nThe dash can be personalised via Link ECU PC Link and Aim Technologies Race Studio 3 software. \u003cbr\u003e\u003cbr\u003e\n\nIncluded in the box: \u003cbr\u003e\nLink MXS 1.2 Strada\u003cbr\u003e\nUSB cable\u003cbr\u003e\n14 pin standard wiring\u003cbr\u003e\n23 pin connector + contacts\u003cbr\u003e\u003cbr\u003e\n\n\nGPS module available separately.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e","published_at":"2025-02-04T13:22:16+08:00","created_at":"2025-02-04T13:20:46+08:00","vendor":"Link Engine Management","type":"Console and Dash Parts","tags":["1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","alfa-romeo","aston-martin","audi","bmw","bmw-mini","chevrolet","citroen","civic-fd2-2007-2010-na-k20z2-i4","console-and-dash-parts","daihatsu","dash","e-throttle","ferrari","fiat","ford","honda","hyundai","kia","lexus","link-engine-management","lotus","mazda","mercedes-benz","mitsubishi","nissan","opel","peak-and-hold-injection","peugeot","porsche","renault","seat","skoda","subaru","suzuki","throttle-by-cable","toyota","tva","Universal","volkswagen","volvo","ws10"],"price":244850,"price_min":244850,"price_max":244850,"available":true,"price_varies":false,"compare_at_price":269000,"compare_at_price_min":269000,"compare_at_price_max":269000,"compare_at_price_varies":false,"variants":[{"id":43761922146486,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"100-0168","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Link Engine Management MXS Strada 5\" Dash - Street Edition","public_title":null,"options":["Default Title"],"price":244850,"weight":6000,"compare_at_price":269000,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/100-0168_aeaa0e22-dc0b-4794-b53f-cea3b1df7790.jpg?v=1738646446"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/100-0168_aeaa0e22-dc0b-4794-b53f-cea3b1df7790.jpg?v=1738646446","options":["Title"],"media":[{"alt":"Link Engine Management MXS Strada 5\" Dash - Street Edition - 100-0168","id":29033173024950,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/100-0168_aeaa0e22-dc0b-4794-b53f-cea3b1df7790.jpg?v=1738646446"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/100-0168_aeaa0e22-dc0b-4794-b53f-cea3b1df7790.jpg?v=1738646446","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Link Engine Management\u003cbr\u003eReference Number: 100-0168\u003cbr\u003eH7Type: Dash\u003cbr\u003e\u003cbr\u003eThe Link MXS Strada Street Edition dash features customisable shift lights, six street icons and a high contrast 5-inch TFT screen display. Visual quality is always optimal as the ambient light sensor auto-adjusts the brightness of the display. \u003cbr\u003e\u003cbr\u003e\n\nThe 10 multi-coloured RGB shift lights on the MXS Strada can be customised to your liking to define the RPM threshold for each single gear. There are also 6 Street Icons located to the side of the screen. These include an indicator light, headlight, high beam, check engine, oil pressure warning light and temperature warning light.\u003cbr\u003e\u003cbr\u003e\n\nThe dash is extremely easy to use, with buttons on the side to navigate through a library of preset display styles, depending on what information you want to see and in what layout. The screen can display all real-time information reading from the ECU such as RPM, speed, water temperature, oil pressure and much more. \u003cbr\u003e\u003cbr\u003e\n\nThe Link MXS connects directly to your Link ECU via the pin kit and wiring provided in the box. To use with plugin ECU’s - CANPCB and CANF connectors will be required (Purchased separately).\u003cbr\u003e\n\nThe dash can be personalised via Link ECU PC Link and Aim Technologies Race Studio 3 software. \u003cbr\u003e\u003cbr\u003e\n\nIncluded in the box: \u003cbr\u003e\nLink MXS 1.2 Strada\u003cbr\u003e\nUSB cable\u003cbr\u003e\n14 pin standard wiring\u003cbr\u003e\n23 pin connector + contacts\u003cbr\u003e\u003cbr\u003e\n\n\nGPS module available separately.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e"}

{"id":4473560465505,"title":"M Factory - 4.44 Final Drive - Toyota - 86 ZN6","handle":"m-factory-4-44-final-drive-toyota-86-zn6-mf-trs-02gt44","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: M Factory\u003cbr\u003eRatio: 4.44\u003cbr\u003e\u003cbr\u003eFinal drive gears are cut from high quality fully-carburized forged nickel-chromoly steel while also benefitting from a proprietary heat treatment process. As a result we are proud to offer enthusiasts the best final drive gears on the market today. By changing you final drive gear ratios, you can experience a dramatic increase in acceleration, giving you on average a 10-15% increase in torque throughout the entire rev-range over the OEM final drive.\u003cbr\u003e\n\nMade from imported Japanese steel these final drives are 'forged' and 'cryo-tempered' for unsurpassed toughness. As used on several Championship winning race cars. \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our European Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e86 | ZN6 SPEC A | 2012-2013 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC B | 2013-2014 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC C | 2014-2015 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC D | 2015-2016 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC E | 2016-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e","published_at":"2020-01-15T15:38:51+08:00","created_at":"2020-01-15T15:38:51+08:00","vendor":"M Factory","type":"Final Drives","tags":["2012","2013","2014","2015","2016","2017","2018","86-zn6-spec-b-2013-2014-na-4u-gse-h4","86-zn6-spec-c-2014-2015-na-4u-gse-h4","86-zn6-spec-d-2015-2016-na-4u-gse-h4","86-zn6-spec-e-2016-2018-na-4u-gse-h4","final-drives","m-factory","toyota","uk1","ws17"],"price":99500,"price_min":99500,"price_max":99500,"available":true,"price_varies":false,"compare_at_price":103600,"compare_at_price_min":103600,"compare_at_price_max":103600,"compare_at_price_varies":false,"variants":[{"id":31701707325537,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MF-TRS-02GT44","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"M Factory - 4.44 Final Drive - Toyota - 86 ZN6","public_title":null,"options":["Default Title"],"price":99500,"weight":12000,"compare_at_price":103600,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Mfactory_final_drive_5422d7d8-59db-4d1e-b56b-87ccfec21603.jpg?v=1710190926"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Mfactory_final_drive_5422d7d8-59db-4d1e-b56b-87ccfec21603.jpg?v=1710190926","options":["Title"],"media":[{"alt":"M Factory - 4.44 Final Drive - Toyota - 86 ZN6 - MF-TRS-02GT44 - RZCrewGarage","id":25428706623670,"position":1,"preview_image":{"aspect_ratio":1.159,"height":333,"width":386,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Mfactory_final_drive_5422d7d8-59db-4d1e-b56b-87ccfec21603.jpg?v=1710190926"},"aspect_ratio":1.159,"height":333,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Mfactory_final_drive_5422d7d8-59db-4d1e-b56b-87ccfec21603.jpg?v=1710190926","width":386}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: M Factory\u003cbr\u003eRatio: 4.44\u003cbr\u003e\u003cbr\u003eFinal drive gears are cut from high quality fully-carburized forged nickel-chromoly steel while also benefitting from a proprietary heat treatment process. As a result we are proud to offer enthusiasts the best final drive gears on the market today. By changing you final drive gear ratios, you can experience a dramatic increase in acceleration, giving you on average a 10-15% increase in torque throughout the entire rev-range over the OEM final drive.\u003cbr\u003e\n\nMade from imported Japanese steel these final drives are 'forged' and 'cryo-tempered' for unsurpassed toughness. As used on several Championship winning race cars. \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our European Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e86 | ZN6 SPEC A | 2012-2013 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC B | 2013-2014 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC C | 2014-2015 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC D | 2015-2016 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC E | 2016-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e"}

{"id":4473560498273,"title":"M Factory - 4.617 Final Drive - Toyota - 86 ZN6","handle":"m-factory-4-617-final-drive-toyota-86-zn6-mf-trs-02gt47","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: M Factory\u003cbr\u003eRatio: 4.617\u003cbr\u003e\u003cbr\u003eFinal drive gears are cut from high quality fully-carburized forged nickel-chromoly steel while also benefitting from a proprietary heat treatment process. As a result we are proud to offer enthusiasts the best final drive gears on the market today. By changing you final drive gear ratios, you can experience a dramatic increase in acceleration, giving you on average a 10-15% increase in torque throughout the entire rev-range over the OEM final drive.\u003cbr\u003e\n\nMade from imported Japanese steel these final drives are 'forged' and 'cryo-tempered' for unsurpassed toughness. As used on several Championship winning race cars. \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our European Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e86 | ZN6 SPEC A | 2012-2013 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC B | 2013-2014 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC C | 2014-2015 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC D | 2015-2016 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC E | 2016-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e","published_at":"2020-01-15T15:38:52+08:00","created_at":"2020-01-15T15:38:53+08:00","vendor":"M Factory","type":"Final Drives","tags":["2012","2013","2014","2015","2016","2017","2018","86-zn6-spec-b-2013-2014-na-4u-gse-h4","86-zn6-spec-c-2014-2015-na-4u-gse-h4","86-zn6-spec-d-2015-2016-na-4u-gse-h4","86-zn6-spec-e-2016-2018-na-4u-gse-h4","final-drives","m-factory","toyota","uk1","ws17"],"price":99500,"price_min":99500,"price_max":99500,"available":true,"price_varies":false,"compare_at_price":103600,"compare_at_price_min":103600,"compare_at_price_max":103600,"compare_at_price_varies":false,"variants":[{"id":31701707358305,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MF-TRS-02GT47","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"M Factory - 4.617 Final Drive - Toyota - 86 ZN6","public_title":null,"options":["Default Title"],"price":99500,"weight":12000,"compare_at_price":103600,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Mfactory_final_drive_2ffd7df9-ea5a-4a8c-8d75-dc3d68772799.jpg?v=1710190926"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Mfactory_final_drive_2ffd7df9-ea5a-4a8c-8d75-dc3d68772799.jpg?v=1710190926","options":["Title"],"media":[{"alt":"M Factory - 4.617 Final Drive - Toyota - 86 ZN6 - MF-TRS-02GT47 - RZCrewGarage","id":25428707115190,"position":1,"preview_image":{"aspect_ratio":1.159,"height":333,"width":386,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Mfactory_final_drive_2ffd7df9-ea5a-4a8c-8d75-dc3d68772799.jpg?v=1710190926"},"aspect_ratio":1.159,"height":333,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Mfactory_final_drive_2ffd7df9-ea5a-4a8c-8d75-dc3d68772799.jpg?v=1710190926","width":386}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: M Factory\u003cbr\u003eRatio: 4.617\u003cbr\u003e\u003cbr\u003eFinal drive gears are cut from high quality fully-carburized forged nickel-chromoly steel while also benefitting from a proprietary heat treatment process. As a result we are proud to offer enthusiasts the best final drive gears on the market today. By changing you final drive gear ratios, you can experience a dramatic increase in acceleration, giving you on average a 10-15% increase in torque throughout the entire rev-range over the OEM final drive.\u003cbr\u003e\n\nMade from imported Japanese steel these final drives are 'forged' and 'cryo-tempered' for unsurpassed toughness. As used on several Championship winning race cars. \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our European Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e86 | ZN6 SPEC A | 2012-2013 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC B | 2013-2014 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC C | 2014-2015 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC D | 2015-2016 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC E | 2016-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e"}

{"id":561988960283,"title":"Mishimoto - Toyota 86 Thermostatic Oil Cooler Kit - ZN6 - MMOC-BRZ-13T","handle":"mishimoto-toyota-86-thermostatic-oil-cooler-kit-zn6-mmoc-brz-13t","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-BRZ-13T\u003cbr\u003eTransmission: MT\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDirect fit f\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e86 | ZN6 SPEC A | 2012-2013 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC B | 2013-2014 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC C | 2014-2015 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC D | 2015-2016 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC E | 2016-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e","published_at":"2018-01-24T23:24:33+08:00","created_at":"2018-01-24T23:24:34+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2012","2013","2014","2015","2016","2017","2018","car-specific","cooling","mishimoto","oil-cooler-kits","oil-coolers","toyota","us1","ws111"],"price":114440,"price_min":114440,"price_max":114440,"available":true,"price_varies":false,"compare_at_price":114700,"compare_at_price_min":114700,"compare_at_price_max":114700,"compare_at_price_varies":false,"variants":[{"id":5990385745947,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-BRZ-13T","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Toyota 86 Thermostatic Oil Cooler Kit - ZN6 - MMOC-BRZ-13T","public_title":null,"options":["Default Title"],"price":114440,"weight":10260,"compare_at_price":114700,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13T_7492df8e-7432-45e1-bf35-d71868ef4a08.jpg?v=1710154085"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13T_7492df8e-7432-45e1-bf35-d71868ef4a08.jpg?v=1710154085","options":["Title"],"media":[{"alt":"mishimoto-toyota-86-thermostatic-oil-cooler-kit-zn6-mmoc-brz-13t - RZCREWGARAGE","id":1351328989281,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13T_7492df8e-7432-45e1-bf35-d71868ef4a08.jpg?v=1710154085"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13T_7492df8e-7432-45e1-bf35-d71868ef4a08.jpg?v=1710154085","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-BRZ-13T\u003cbr\u003eTransmission: MT\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDirect fit f\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e86 | ZN6 SPEC A | 2012-2013 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC B | 2013-2014 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC C | 2014-2015 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC D | 2015-2016 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC E | 2016-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e"}

{"id":561989025819,"title":"Mishimoto - Toyota 86 Thermostatic Oil Cooler Kit, Black - Black - ZN6 - MMOC-BRZ-13TBK","handle":"mishimoto-toyota-86-thermostatic-oil-cooler-kit-black-black-zn6-mmoc-brz-13tbk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-BRZ-13TBK\u003cbr\u003eTransmission: MT\u003cbr\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e86 | ZN6 SPEC A | 2012-2013 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC B | 2013-2014 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC C | 2014-2015 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC D | 2015-2016 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC E | 2016-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e","published_at":"2018-01-24T23:24:34+08:00","created_at":"2018-01-24T23:24:35+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2012","2013","2014","2015","2016","2017","2018","car-specific","cooling","mishimoto","oil-cooler-kits","oil-coolers","toyota","us1","ws111"],"price":114440,"price_min":114440,"price_max":114440,"available":true,"price_varies":false,"compare_at_price":114700,"compare_at_price_min":114700,"compare_at_price_max":114700,"compare_at_price_varies":false,"variants":[{"id":5990386171931,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-BRZ-13TBK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Toyota 86 Thermostatic Oil Cooler Kit, Black - Black - ZN6 - MMOC-BRZ-13TBK","public_title":null,"options":["Default Title"],"price":114440,"weight":10123,"compare_at_price":114700,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13TBK_b3bde20f-afcb-471e-bff0-e7431f65e6ba.jpg?v=1710154085"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13TBK_b3bde20f-afcb-471e-bff0-e7431f65e6ba.jpg?v=1710154085","options":["Title"],"media":[{"alt":"mishimoto-toyota-86-thermostatic-oil-cooler-kit-black-black-zn6-mmoc-brz-13tbk - RZCREWGARAGE","id":1351329022049,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13TBK_b3bde20f-afcb-471e-bff0-e7431f65e6ba.jpg?v=1710154085"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13TBK_b3bde20f-afcb-471e-bff0-e7431f65e6ba.jpg?v=1710154085","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-BRZ-13TBK\u003cbr\u003eTransmission: MT\u003cbr\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e86 | ZN6 SPEC A | 2012-2013 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC B | 2013-2014 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC C | 2014-2015 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC D | 2015-2016 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC E | 2016-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e"}

{"id":7334988021942,"title":"Monster Sport - Door Handle Protector - Suzuki","handle":"monster-sport-door-handle-protector-suzuki","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Monster Sport\u003cbr\u003eReference Number: 792500-7600M\u003cbr\u003eType: \u003cbr\u003e\u003cbr\u003eProtection sheet for\ndoor handles that combines scratch prevention function and sporty design.\u003cbr\u003esold per pair\u003cbr\u003ecompatible with: \u003cbr\u003e\u003cbr\u003e \nSUZUKI\u003cbr\u003e \nZC33\u003cbr\u003e \nZC83S\u003cbr\u003e \nZD83S\u003cbr\u003e \nZC53S\u003cbr\u003e \nZD53S\u003cbr\u003e \nZC13S\u003cbr\u003e \u003cbr\u003e \u003cbr\u003e\u003cbr\u003ePlease note that our system calculates most AERO parts weight and shipping cost using Volumetric Weight. ((LxWxH)\/5000)\u003cbr\u003eIt often results in large shipping's cost, for certain items such as Bumpers and side skirts, they could be repackaged together to save on shipping. If you are interested in getting a better quotation on the shipping cost, please email us.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e","published_at":"2022-05-05T14:20:09+08:00","created_at":"2022-05-05T14:13:45+08:00","vendor":"Monster Sport","type":"Aero","tags":["1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","aero","alfa-romeo","aston-martin","audi","bmw","bmw-mini","chevrolet","citroen","daihatsu","doors","emblem-stickers","ferrari","fiat","ford","honda","hyundai","jp1","kia","lexus","lotus","mazda","mercedes-benz","mitsubishi","monster-sport","nissan","opel","peugeot","porsche","renault","seat","skoda","subaru","suzuki","toyota","volkswagen","volvo","ws18"],"price":3880,"price_min":3880,"price_max":3880,"available":true,"price_varies":false,"compare_at_price":3700,"compare_at_price_min":3700,"compare_at_price_max":3700,"compare_at_price_varies":false,"variants":[{"id":41443180642486,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"792500-7600M","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Monster Sport - Door Handle Protector - Suzuki","public_title":null,"options":["Default Title"],"price":3880,"weight":550,"compare_at_price":3700,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/monster-sport-door-handle-protector-suzuki-rzcrew.jpg?v=1710320752"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/monster-sport-door-handle-protector-suzuki-rzcrew.jpg?v=1710320752","options":["Title"],"media":[{"alt":"Monster Sport - Door Handle Protector - Suzuki - 792500-7600M - Rzcrew Garage","id":25491492962486,"position":1,"preview_image":{"aspect_ratio":1.499,"height":667,"width":1000,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/monster-sport-door-handle-protector-suzuki-rzcrew.jpg?v=1710320752"},"aspect_ratio":1.499,"height":667,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/monster-sport-door-handle-protector-suzuki-rzcrew.jpg?v=1710320752","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Monster Sport\u003cbr\u003eReference Number: 792500-7600M\u003cbr\u003eType: \u003cbr\u003e\u003cbr\u003eProtection sheet for\ndoor handles that combines scratch prevention function and sporty design.\u003cbr\u003esold per pair\u003cbr\u003ecompatible with: \u003cbr\u003e\u003cbr\u003e \nSUZUKI\u003cbr\u003e \nZC33\u003cbr\u003e \nZC83S\u003cbr\u003e \nZD83S\u003cbr\u003e \nZC53S\u003cbr\u003e \nZD53S\u003cbr\u003e \nZC13S\u003cbr\u003e \u003cbr\u003e \u003cbr\u003e\u003cbr\u003ePlease note that our system calculates most AERO parts weight and shipping cost using Volumetric Weight. ((LxWxH)\/5000)\u003cbr\u003eIt often results in large shipping's cost, for certain items such as Bumpers and side skirts, they could be repackaged together to save on shipping. If you are interested in getting a better quotation on the shipping cost, please email us.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e"}

{"id":8120922210486,"title":"MoonFace - GenB Adjustable stabilizer link - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K","handle":"moonface-genb-adjustable-stabilizer-link-toyota-hiace-trh-kdh-gdh200-series-trh200k-sal002h","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: MoonFace\u003cbr\u003eReference Number: SAL002H\u003cbr\u003eType: Front Stabi Link\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e? Enjoy a comfortable ride and outstanding maneuverability with the return of stability!?\nA stabilizer works to reduce the left-right difference that occurs when the suspension is activated due to the twisting action of the rod, and suppresses the roll of the vehicle body. However, this requires that the angle of the stubby end be appropriate for the trajectory ? line of motion ? that the suspension strokes. In the case of a lowered Hiace, the stubby end, which moves in a circle around the journal attached to the member side, is pushed by the link and bounces upward. Normally, the lower arm stroked by input from the road twists the stabilizer via the stabilizer link, but the stabilizer end, which has already reached the limit of its operating range, lifts the body using the journal as a fulcrum. This is a problem before anti-roll performance, and it's like connecting the suspension and body directly.“Adjustable stabilizer link ” is an essential item for low-down vehicles that corrects the stabilizer function to an unobstructed position by adjusting the total length of the link.\u003cbr\u003e\u003cbr\u003e\n\n? Compatible vehicle height: 1.5?2.5 inches down\u003cbr\u003e\u003cbr\u003e\n\n? Adopts the industry's first aluminum forged case?\u003cbr\u003e\nBy using an aluminum forged case, it is lightweight, highly rigid, and incredibly durable.\u003cbr\u003e\u003cbr\u003e\n\n? Wide range of action angles equivalent to genuine?\u003cbr\u003e\nSet the set height of the ball stud to the optimal value derived from detailed calculations. By improving assembly accuracy, it achieves both strength superior to the original and a wide range of action angles.\u003cbr\u003e\u003cbr\u003e\n\n? minimizes unnecessary runout of sliding shaft “Hard stabilizer link bush” is standard equipment?\nMinimize unnecessary flapping and sagging that impair the stabilizer function, and instantly and directly transmit input from the road surface to the stabilizer.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4\u003c!--split--\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4","published_at":"2024-12-06T10:49:42+08:00","created_at":"2024-12-06T10:47:04+08:00","vendor":"MoonFace","type":"Bars and Braces","tags":["2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","bars-and-braces","front","hiace-van-trh200k-2004-2018-na-1tr-fe-i4","JP1","moonface","moonface20","stabi-link","toyota","TRH200K","ws113"],"price":23095,"price_min":23095,"price_max":23095,"available":true,"price_varies":false,"compare_at_price":24700,"compare_at_price_min":24700,"compare_at_price_max":24700,"compare_at_price_varies":false,"variants":[{"id":43656482848950,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SAL002H","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"MoonFace - GenB Adjustable stabilizer link - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K","public_title":null,"options":["Default Title"],"price":23095,"weight":5000,"compare_at_price":24700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/334-1_1ea4d97c-7c23-4f79-b92a-050282f4af23.jpg?v=1733453224"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/334-1_1ea4d97c-7c23-4f79-b92a-050282f4af23.jpg?v=1733453224","options":["Title"],"media":[{"alt":"MoonFace - GenB Adjustable stabilizer link - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K - SAL002H","id":28841700786358,"position":1,"preview_image":{"aspect_ratio":1.501,"height":533,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/334-1_1ea4d97c-7c23-4f79-b92a-050282f4af23.jpg?v=1733453224"},"aspect_ratio":1.501,"height":533,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/334-1_1ea4d97c-7c23-4f79-b92a-050282f4af23.jpg?v=1733453224","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: MoonFace\u003cbr\u003eReference Number: SAL002H\u003cbr\u003eType: Front Stabi Link\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e? Enjoy a comfortable ride and outstanding maneuverability with the return of stability!?\nA stabilizer works to reduce the left-right difference that occurs when the suspension is activated due to the twisting action of the rod, and suppresses the roll of the vehicle body. However, this requires that the angle of the stubby end be appropriate for the trajectory ? line of motion ? that the suspension strokes. In the case of a lowered Hiace, the stubby end, which moves in a circle around the journal attached to the member side, is pushed by the link and bounces upward. Normally, the lower arm stroked by input from the road twists the stabilizer via the stabilizer link, but the stabilizer end, which has already reached the limit of its operating range, lifts the body using the journal as a fulcrum. This is a problem before anti-roll performance, and it's like connecting the suspension and body directly.“Adjustable stabilizer link ” is an essential item for low-down vehicles that corrects the stabilizer function to an unobstructed position by adjusting the total length of the link.\u003cbr\u003e\u003cbr\u003e\n\n? Compatible vehicle height: 1.5?2.5 inches down\u003cbr\u003e\u003cbr\u003e\n\n? Adopts the industry's first aluminum forged case?\u003cbr\u003e\nBy using an aluminum forged case, it is lightweight, highly rigid, and incredibly durable.\u003cbr\u003e\u003cbr\u003e\n\n? Wide range of action angles equivalent to genuine?\u003cbr\u003e\nSet the set height of the ball stud to the optimal value derived from detailed calculations. By improving assembly accuracy, it achieves both strength superior to the original and a wide range of action angles.\u003cbr\u003e\u003cbr\u003e\n\n? minimizes unnecessary runout of sliding shaft “Hard stabilizer link bush” is standard equipment?\nMinimize unnecessary flapping and sagging that impair the stabilizer function, and instantly and directly transmit input from the road surface to the stabilizer.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4\u003c!--split--\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4"}

{"id":8120922276022,"title":"MoonFace - GenB Bump Just Tie Rod End B\/E - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K","handle":"moonface-genb-bump-just-tie-rod-end-b-e-toyota-hiace-trh-kdh-gdh200-series-trh200k-ste01bh","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: MoonFace\u003cbr\u003eReference Number: STE01BH\u003cbr\u003eType: Front Tie rod\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe disadvantage of lowdowns that everyone finds unpleasant is due to bump steer caused by the abnormal angle of the tie rod. Bump steer causes extreme toe changes when the suspension strokes, leading to deterioration of straightness when driving. This is why the steering is intense on rough roads. It also has a significant impact on steer characteristics during cornering and reduces turning performance.“Bump Just Tie Rod End ” is a geometry correction item created to eliminate all those risks.\u003cbr\u003e\u003cbr\u003e\n\n? Shut out the negative effects of bump steer?\u003cbr\u003e\nBump steer caused by abnormal angle of the tie rod. Bump steer is suppressed by extending the ball stud to the optimal length and optimizing the angle of the tie rod.\u003cbr\u003e\u003cbr\u003e\n\n? nimble footwork linked to the driver's will?\u003cbr\u003e\nThe synergistic effect of eliminating bump steer and lowering the center of gravity by lowering the bump steer creates nimble footwork that links to the driver's will.\u003cbr\u003e\u003cbr\u003e\n\n?Geometry correction item that combines high strength and functional design?\u003cbr\u003e\nLarge diameter ball studs built into stylish forged cases. High strength and functional design transmit steering operations directly to the rudder shaft.\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4\u003c!--split--\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4","published_at":"2024-12-06T10:49:56+08:00","created_at":"2024-12-06T10:47:08+08:00","vendor":"MoonFace","type":"Bars and Braces","tags":["2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","bars-and-braces","front","hiace-van-trh200k-2004-2018-na-1tr-fe-i4","JP1","moonface","moonface20","tie-rod","toyota","TRH200K","ws114"],"price":26319,"price_min":26319,"price_max":26319,"available":true,"price_varies":false,"compare_at_price":28300,"compare_at_price_min":28300,"compare_at_price_max":28300,"compare_at_price_varies":false,"variants":[{"id":43656482947254,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"STE01BH","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"MoonFace - GenB Bump Just Tie Rod End B\/E - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K","public_title":null,"options":["Default Title"],"price":26319,"weight":4000,"compare_at_price":28300,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/STE01BH_94e3b372-f295-4fa8-b1d7-c3c7b180e978.jpg?v=1733453228"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/STE01BH_94e3b372-f295-4fa8-b1d7-c3c7b180e978.jpg?v=1733453228","options":["Title"],"media":[{"alt":"MoonFace - GenB Bump Just Tie Rod End B\/E - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K - STE01BH","id":28841700851894,"position":1,"preview_image":{"aspect_ratio":1.501,"height":533,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/STE01BH_94e3b372-f295-4fa8-b1d7-c3c7b180e978.jpg?v=1733453228"},"aspect_ratio":1.501,"height":533,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/STE01BH_94e3b372-f295-4fa8-b1d7-c3c7b180e978.jpg?v=1733453228","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: MoonFace\u003cbr\u003eReference Number: STE01BH\u003cbr\u003eType: Front Tie rod\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe disadvantage of lowdowns that everyone finds unpleasant is due to bump steer caused by the abnormal angle of the tie rod. Bump steer causes extreme toe changes when the suspension strokes, leading to deterioration of straightness when driving. This is why the steering is intense on rough roads. It also has a significant impact on steer characteristics during cornering and reduces turning performance.“Bump Just Tie Rod End ” is a geometry correction item created to eliminate all those risks.\u003cbr\u003e\u003cbr\u003e\n\n? Shut out the negative effects of bump steer?\u003cbr\u003e\nBump steer caused by abnormal angle of the tie rod. Bump steer is suppressed by extending the ball stud to the optimal length and optimizing the angle of the tie rod.\u003cbr\u003e\u003cbr\u003e\n\n? nimble footwork linked to the driver's will?\u003cbr\u003e\nThe synergistic effect of eliminating bump steer and lowering the center of gravity by lowering the bump steer creates nimble footwork that links to the driver's will.\u003cbr\u003e\u003cbr\u003e\n\n?Geometry correction item that combines high strength and functional design?\u003cbr\u003e\nLarge diameter ball studs built into stylish forged cases. High strength and functional design transmit steering operations directly to the rudder shaft.\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4\u003c!--split--\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4"}

{"id":8158054416566,"title":"MoonFace - GenB Center Frame support bar - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K","handle":"moonface-genb-center-frame-support-bar-toyota-hiace-trh-kdh-gdh200-series-trh200k-oub13h","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: MoonFace\u003cbr\u003eReference Number: OUB13H\u003cbr\u003eType: Center 2 Points Steel Braces\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAs you know, the basic design of the Hiace is a \"commercial van\". Because the design prioritizes the luggage space, it does not necessarily have sufficient strength for the cross-sectional area of ??the body. The \"frame support brace\" is a reinforcement item that connects the left and right frames with a thick oval shaft that is lightweight and highly rigid, improving the body rigidity without sacrificing the loading space.\u003cbr\u003e\u003cbr\u003e\n\n? Body reinforcement that is faithful to the basics proves the true value of increased rigidity!\u003cbr\u003e\nThe body with increased rigidity transmits the movement of the suspension to the road surface without loss, demonstrating light footwork and outstanding turning ability that you would not expect from a large vehicle.\u003cbr\u003e\u003cbr\u003e\n\n? The difference is clear! Impressive straight-line stability!\u003cbr\u003e\nThe platform is firmly and securely joined by the \"frame support brace\". By actively controlling the twisting of the body, we promise stable driving that is not affected by crosswinds.\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4\u003c!--split--\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4","published_at":"2025-02-27T15:59:21+08:00","created_at":"2025-02-27T15:57:31+08:00","vendor":"MoonFace","type":"Bars and Braces","tags":["2-points","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","bars-and-braces","braces","center","hiace-van-trh200k-2004-2018-na-1tr-fe-i4","JP1","moonface","moonface20","steel","toyota","TRH200K","ws17"],"price":25360,"price_min":25360,"price_max":25360,"available":true,"price_varies":false,"compare_at_price":24300,"compare_at_price_min":24300,"compare_at_price_max":24300,"compare_at_price_varies":false,"variants":[{"id":43812854890678,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"OUB13H","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"MoonFace - GenB Center Frame support bar - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K","public_title":null,"options":["Default Title"],"price":25360,"weight":4000,"compare_at_price":24300,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/371-1_1_a6ea6f22-0d76-4740-a94c-e6f05dfc85e0.jpg?v=1740643051"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/371-1_1_a6ea6f22-0d76-4740-a94c-e6f05dfc85e0.jpg?v=1740643051","options":["Title"],"media":[{"alt":"MoonFace - GenB Center Frame support bar - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K - OUB13H","id":29133781172406,"position":1,"preview_image":{"aspect_ratio":1.501,"height":533,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/371-1_1_a6ea6f22-0d76-4740-a94c-e6f05dfc85e0.jpg?v=1740643051"},"aspect_ratio":1.501,"height":533,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/371-1_1_a6ea6f22-0d76-4740-a94c-e6f05dfc85e0.jpg?v=1740643051","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: MoonFace\u003cbr\u003eReference Number: OUB13H\u003cbr\u003eType: Center 2 Points Steel Braces\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAs you know, the basic design of the Hiace is a \"commercial van\". Because the design prioritizes the luggage space, it does not necessarily have sufficient strength for the cross-sectional area of ??the body. The \"frame support brace\" is a reinforcement item that connects the left and right frames with a thick oval shaft that is lightweight and highly rigid, improving the body rigidity without sacrificing the loading space.\u003cbr\u003e\u003cbr\u003e\n\n? Body reinforcement that is faithful to the basics proves the true value of increased rigidity!\u003cbr\u003e\nThe body with increased rigidity transmits the movement of the suspension to the road surface without loss, demonstrating light footwork and outstanding turning ability that you would not expect from a large vehicle.\u003cbr\u003e\u003cbr\u003e\n\n? The difference is clear! Impressive straight-line stability!\u003cbr\u003e\nThe platform is firmly and securely joined by the \"frame support brace\". By actively controlling the twisting of the body, we promise stable driving that is not affected by crosswinds.\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4\u003c!--split--\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4"}

{"id":8158054351030,"title":"MoonFace - GenB Center Frame Support Brace - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K","handle":"moonface-genb-center-frame-support-brace-toyota-hiace-trh-kdh-gdh200-series-trh200k-oub15h","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: MoonFace\u003cbr\u003eReference Number: OUB15H\u003cbr\u003eType: Center 2 Points Steel Braces\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAs you know, the basic design of the Hiace is a \"commercial van\". Because the design prioritizes the luggage space, it does not necessarily have sufficient strength for the cross-sectional area of ??the body. The \"frame support brace\" is a reinforcement item that connects the left and right frames with a thick oval shaft that is lightweight and highly rigid, improving the body rigidity without sacrificing the loading space.\u003cbr\u003e\u003cbr\u003e\n\n? Body reinforcement that is faithful to the basics proves the true value of increased rigidity!\u003cbr\u003e\nThe body with increased rigidity transmits the movement of the suspension to the road surface without loss, demonstrating light footwork and outstanding turning ability that you would not expect from a large vehicle.\u003cbr\u003e\u003cbr\u003e\n\n? The difference is clear! Impressive straight-line stability!\u003cbr\u003e\nThe platform is firmly and securely joined by the \"frame support brace\". By actively controlling the twisting of the body, we promise stable driving that is not affected by crosswinds.\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4\u003c!--split--\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4","published_at":"2025-02-27T15:59:16+08:00","created_at":"2025-02-27T15:57:27+08:00","vendor":"MoonFace","type":"Bars and Braces","tags":["2-points","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","bars-and-braces","braces","center","hiace-van-trh200k-2004-2018-na-1tr-fe-i4","JP1","moonface","moonface20","steel","toyota","TRH200K","ws111"],"price":44540,"price_min":44540,"price_max":44540,"available":true,"price_varies":false,"compare_at_price":45000,"compare_at_price_min":45000,"compare_at_price_max":45000,"compare_at_price_varies":false,"variants":[{"id":43812854825142,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"OUB15H","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"MoonFace - GenB Center Frame Support Brace - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K","public_title":null,"options":["Default Title"],"price":44540,"weight":6000,"compare_at_price":45000,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/376-1_bc159b52-3e8c-4ef9-8a38-d70204d4dad9.jpg?v=1740643047"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/376-1_bc159b52-3e8c-4ef9-8a38-d70204d4dad9.jpg?v=1740643047","options":["Title"],"media":[{"alt":"MoonFace - GenB Center Frame Support Brace - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K - OUB15H","id":29133781139638,"position":1,"preview_image":{"aspect_ratio":1.499,"height":533,"width":799,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/376-1_bc159b52-3e8c-4ef9-8a38-d70204d4dad9.jpg?v=1740643047"},"aspect_ratio":1.499,"height":533,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/376-1_bc159b52-3e8c-4ef9-8a38-d70204d4dad9.jpg?v=1740643047","width":799}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: MoonFace\u003cbr\u003eReference Number: OUB15H\u003cbr\u003eType: Center 2 Points Steel Braces\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAs you know, the basic design of the Hiace is a \"commercial van\". Because the design prioritizes the luggage space, it does not necessarily have sufficient strength for the cross-sectional area of ??the body. The \"frame support brace\" is a reinforcement item that connects the left and right frames with a thick oval shaft that is lightweight and highly rigid, improving the body rigidity without sacrificing the loading space.\u003cbr\u003e\u003cbr\u003e\n\n? Body reinforcement that is faithful to the basics proves the true value of increased rigidity!\u003cbr\u003e\nThe body with increased rigidity transmits the movement of the suspension to the road surface without loss, demonstrating light footwork and outstanding turning ability that you would not expect from a large vehicle.\u003cbr\u003e\u003cbr\u003e\n\n? The difference is clear! Impressive straight-line stability!\u003cbr\u003e\nThe platform is firmly and securely joined by the \"frame support brace\". By actively controlling the twisting of the body, we promise stable driving that is not affected by crosswinds.\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4\u003c!--split--\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4"}

{"id":7085469892790,"title":"MoonFace - GenB Frame Support Bar - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K","handle":"moonface-genb-frame-support-bar-toyota-hiace-trh-kdh-gdh200-series-trh200k-oub01h","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: MoonFace\u003cbr\u003eReference Number: OUB01H\u003cbr\u003eType: Front 2 Points Aluminum Braces\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAs you know, the basic design of Hiace is a \"commercial van\". Due to the design that prioritizes the luggage space, it cannot be said that it has sufficient strength for the cross-sectional area of ??the car body. The \"frame support bar\" is a reinforcement item that effectively combines a lightweight and highly rigid thick aluminum shaft and an oval shaft. It is possible to dramatically improve the body rigidity without sacrificing the loading space.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4\u003c!--split--\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4","published_at":"2021-10-06T14:59:11+08:00","created_at":"2021-10-06T14:59:12+08:00","vendor":"MoonFace","type":"Bars and Braces","tags":["2-points","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","aluminum","bars-and-braces","braces","front","hiace-van-trh200k-2004-2018-na-1tr-fe-i4","jp1","moonface","moonface20","toyota","TRH200K","ws18"],"price":39970,"price_min":39970,"price_max":39970,"available":true,"price_varies":false,"compare_at_price":38900,"compare_at_price_min":38900,"compare_at_price_max":38900,"compare_at_price_varies":false,"variants":[{"id":40706400977078,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"OUB01H","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"MoonFace - GenB Frame Support Bar - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K","public_title":null,"options":["Default Title"],"price":39970,"weight":13600,"compare_at_price":38900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/moonface-genb-frame-support-bar-toyota-hiace-trh-kdh-gdh200-series-trh200k-rzcrew.jpg?v=1710322759"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/moonface-genb-frame-support-bar-toyota-hiace-trh-kdh-gdh200-series-trh200k-rzcrew.jpg?v=1710322759","options":["Title"],"media":[{"alt":"MoonFace - GenB Frame Support Bar - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K - OUB01H","id":26644197736630,"position":1,"preview_image":{"aspect_ratio":1.501,"height":533,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/moonface-genb-frame-support-bar-toyota-hiace-trh-kdh-gdh200-series-trh200k-rzcrew.jpg?v=1710322759"},"aspect_ratio":1.501,"height":533,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/moonface-genb-frame-support-bar-toyota-hiace-trh-kdh-gdh200-series-trh200k-rzcrew.jpg?v=1710322759","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: MoonFace\u003cbr\u003eReference Number: OUB01H\u003cbr\u003eType: Front 2 Points Aluminum Braces\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAs you know, the basic design of Hiace is a \"commercial van\". Due to the design that prioritizes the luggage space, it cannot be said that it has sufficient strength for the cross-sectional area of ??the car body. The \"frame support bar\" is a reinforcement item that effectively combines a lightweight and highly rigid thick aluminum shaft and an oval shaft. It is possible to dramatically improve the body rigidity without sacrificing the loading space.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4\u003c!--split--\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4"}

{"id":8158054482102,"title":"MoonFace - GenB Height Down Block Kit [1.0 inch\/-25 mm] - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K","handle":"moonface-genb-height-down-block-kit-1-0-inch-25-mm-toyota-hiace-trh-kdh-gdh200-series-trh200k-sdb10h","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: MoonFace\u003cbr\u003eReference Number: SDB10H\u003cbr\u003eType: Rear -25mm Steel Lowering Block\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe \"Height Down Block Kit\" is a kit of down blocks and U-bolts required to lower a Hiace. By making the block body multifunctional, we have completely overcome the shortcomings that could not be compensated for with conventional products.\u003cbr\u003e\n\n?A bold and elegant form born from the pursuit of increased strength and weight reduction!\u003cbr\u003e\nThe block body is made of A6061 aluminum extrusion material, which is lightweight and highly rigid. After cutting with a CNC lathe, it is shot blasted and black anodized.\u003cbr\u003e\u003cbr\u003e\n\n?Uses the patented \"fitting cone\" technology, which enables unprecedented assembly precision!\u003cbr\u003e\nAn innovative conical center pin is inserted into the center of the top surface of the block. A perfect fit is achieved by combining it with the \"surface lock U-bolt\" which boasts strong holding power.\u003cbr\u003e\u003cbr\u003e\n\n?A variety of innovative and unique functions!\u003cbr\u003e\u003cbr\u003e\n? Axle guide\u003cbr\u003e\nSuppresses axle vibration (thrust angle) caused by misalignment in the front and rear directions. Significant improvement in straightness allows you to accurately trace the driving lane even on rough roads.\u003cbr\u003e\u003cbr\u003e\n?Angle adjustment function\u003cbr\u003e\nOptimizes the axle inclination angle in sync with the angle change of the leaf spring. Reduces the burden on the transmission and propeller shaft.\u003cbr\u003e\u003cbr\u003e\nCentering function:\u003cbr\u003e\nAdjusts the axle offset to the driver's seat side to the center of the vehicle. Allows for a perfect flush setting.\u003cbr\u003e\u003cbr\u003e\nOff-center correction function:\u003cbr\u003e\nCorrects the forward movement of the axle and corrects the wheel position to the center of the fender arch.\u003cbr\u003e\n\nMultiple sizes are available every 0.5 inches (12.5 mm)!\u003cbr\u003e\nVehicle height changes depending on the leaf spring specifications and load. A wide range of sizes allows you to set up the vehicle height exactly as you want it.\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4\u003c!--split--\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4","published_at":"2025-02-27T15:59:41+08:00","created_at":"2025-02-27T15:57:34+08:00","vendor":"MoonFace","type":"Bars and Braces","tags":["-25mm","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","bars-and-braces","hiace-van-trh200k-2004-2018-na-1tr-fe-i4","JP1","lowering-block","moonface","moonface20","rear","steel","toyota","TRH200K","ws112"],"price":28760,"price_min":28760,"price_max":28760,"available":true,"price_varies":false,"compare_at_price":29200,"compare_at_price_min":29200,"compare_at_price_max":29200,"compare_at_price_varies":false,"variants":[{"id":43812854956214,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SDB10H","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"MoonFace - GenB Height Down Block Kit [1.0 inch\/-25 mm] - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K","public_title":null,"options":["Default Title"],"price":28760,"weight":4000,"compare_at_price":29200,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/408-2_eef7bfcf-2959-4726-bea4-d8704ef7bae7.jpg?v=1740643055"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/408-2_eef7bfcf-2959-4726-bea4-d8704ef7bae7.jpg?v=1740643055","options":["Title"],"media":[{"alt":"MoonFace - GenB Height Down Block Kit [1.0 inch\/-25 mm] - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K - SDB10H","id":29133781205174,"position":1,"preview_image":{"aspect_ratio":1.501,"height":533,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/408-2_eef7bfcf-2959-4726-bea4-d8704ef7bae7.jpg?v=1740643055"},"aspect_ratio":1.501,"height":533,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/408-2_eef7bfcf-2959-4726-bea4-d8704ef7bae7.jpg?v=1740643055","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: MoonFace\u003cbr\u003eReference Number: SDB10H\u003cbr\u003eType: Rear -25mm Steel Lowering Block\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe \"Height Down Block Kit\" is a kit of down blocks and U-bolts required to lower a Hiace. By making the block body multifunctional, we have completely overcome the shortcomings that could not be compensated for with conventional products.\u003cbr\u003e\n\n?A bold and elegant form born from the pursuit of increased strength and weight reduction!\u003cbr\u003e\nThe block body is made of A6061 aluminum extrusion material, which is lightweight and highly rigid. After cutting with a CNC lathe, it is shot blasted and black anodized.\u003cbr\u003e\u003cbr\u003e\n\n?Uses the patented \"fitting cone\" technology, which enables unprecedented assembly precision!\u003cbr\u003e\nAn innovative conical center pin is inserted into the center of the top surface of the block. A perfect fit is achieved by combining it with the \"surface lock U-bolt\" which boasts strong holding power.\u003cbr\u003e\u003cbr\u003e\n\n?A variety of innovative and unique functions!\u003cbr\u003e\u003cbr\u003e\n? Axle guide\u003cbr\u003e\nSuppresses axle vibration (thrust angle) caused by misalignment in the front and rear directions. Significant improvement in straightness allows you to accurately trace the driving lane even on rough roads.\u003cbr\u003e\u003cbr\u003e\n?Angle adjustment function\u003cbr\u003e\nOptimizes the axle inclination angle in sync with the angle change of the leaf spring. Reduces the burden on the transmission and propeller shaft.\u003cbr\u003e\u003cbr\u003e\nCentering function:\u003cbr\u003e\nAdjusts the axle offset to the driver's seat side to the center of the vehicle. Allows for a perfect flush setting.\u003cbr\u003e\u003cbr\u003e\nOff-center correction function:\u003cbr\u003e\nCorrects the forward movement of the axle and corrects the wheel position to the center of the fender arch.\u003cbr\u003e\n\nMultiple sizes are available every 0.5 inches (12.5 mm)!\u003cbr\u003e\nVehicle height changes depending on the leaf spring specifications and load. A wide range of sizes allows you to set up the vehicle height exactly as you want it.\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4\u003c!--split--\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4"}

{"id":8158054645942,"title":"MoonFace - GenB Height Down Block Kit [2.0 inch\/-50 mm] - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K","handle":"moonface-genb-height-down-block-kit-2-0-inch-50-mm-toyota-hiace-trh-kdh-gdh200-series-trh200k-sdb20h","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: MoonFace\u003cbr\u003eReference Number: SDB20H\u003cbr\u003eType: Rear -50mm Steel Lowering Block\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe \"Height Down Block Kit\" is a kit of down blocks and U-bolts required to lower a Hiace. By making the block body multifunctional, we have completely overcome the shortcomings that could not be compensated for with conventional products.\u003cbr\u003e\n\n?A bold and elegant form born from the pursuit of increased strength and weight reduction!\u003cbr\u003e\nThe block body is made of A6061 aluminum extrusion material, which is lightweight and highly rigid. After cutting with a CNC lathe, it is shot blasted and black anodized.\u003cbr\u003e\u003cbr\u003e\n\n?Uses the patented \"fitting cone\" technology, which enables unprecedented assembly precision!\u003cbr\u003e\nAn innovative conical center pin is inserted into the center of the top surface of the block. A perfect fit is achieved by combining it with the \"surface lock U-bolt\" which boasts strong holding power.\u003cbr\u003e\u003cbr\u003e\n\n?A variety of innovative and unique functions!\u003cbr\u003e\u003cbr\u003e\n? Axle guide\u003cbr\u003e\nSuppresses axle vibration (thrust angle) caused by misalignment in the front and rear directions. Significant improvement in straightness allows you to accurately trace the driving lane even on rough roads.\u003cbr\u003e\u003cbr\u003e\n?Angle adjustment function\u003cbr\u003e\nOptimizes the axle inclination angle in sync with the angle change of the leaf spring. Reduces the burden on the transmission and propeller shaft.\u003cbr\u003e\u003cbr\u003e\nCentering function:\u003cbr\u003e\nAdjusts the axle offset to the driver's seat side to the center of the vehicle. Allows for a perfect flush setting.\u003cbr\u003e\u003cbr\u003e\nOff-center correction function:\u003cbr\u003e\nCorrects the forward movement of the axle and corrects the wheel position to the center of the fender arch.\u003cbr\u003e\n\nMultiple sizes are available every 0.5 inches (12.5 mm)!\u003cbr\u003e\nVehicle height changes depending on the leaf spring specifications and load. A wide range of sizes allows you to set up the vehicle height exactly as you want it.\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4\u003c!--split--\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4","published_at":"2025-02-27T15:59:41+08:00","created_at":"2025-02-27T15:57:41+08:00","vendor":"MoonFace","type":"Bars and Braces","tags":["2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","50mm","bars-and-braces","hiace-van-trh200k-2004-2018-na-1tr-fe-i4","JP1","lowering-block","moonface","moonface20","rear","steel","toyota","TRH200K","ws112"],"price":31010,"price_min":31010,"price_max":31010,"available":true,"price_varies":false,"compare_at_price":31600,"compare_at_price_min":31600,"compare_at_price_max":31600,"compare_at_price_varies":false,"variants":[{"id":43812855021750,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SDB20H","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"MoonFace - GenB Height Down Block Kit [2.0 inch\/-50 mm] - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K","public_title":null,"options":["Default Title"],"price":31010,"weight":4000,"compare_at_price":31600,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/408-2_e0adf15f-4430-4762-b4ed-0809e7b412e8.jpg?v=1740643061"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/408-2_e0adf15f-4430-4762-b4ed-0809e7b412e8.jpg?v=1740643061","options":["Title"],"media":[{"alt":"MoonFace - GenB Height Down Block Kit [2.0 inch\/-50 mm] - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K - SDB20H","id":29133781270710,"position":1,"preview_image":{"aspect_ratio":1.501,"height":533,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/408-2_e0adf15f-4430-4762-b4ed-0809e7b412e8.jpg?v=1740643061"},"aspect_ratio":1.501,"height":533,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/408-2_e0adf15f-4430-4762-b4ed-0809e7b412e8.jpg?v=1740643061","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: MoonFace\u003cbr\u003eReference Number: SDB20H\u003cbr\u003eType: Rear -50mm Steel Lowering Block\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe \"Height Down Block Kit\" is a kit of down blocks and U-bolts required to lower a Hiace. By making the block body multifunctional, we have completely overcome the shortcomings that could not be compensated for with conventional products.\u003cbr\u003e\n\n?A bold and elegant form born from the pursuit of increased strength and weight reduction!\u003cbr\u003e\nThe block body is made of A6061 aluminum extrusion material, which is lightweight and highly rigid. After cutting with a CNC lathe, it is shot blasted and black anodized.\u003cbr\u003e\u003cbr\u003e\n\n?Uses the patented \"fitting cone\" technology, which enables unprecedented assembly precision!\u003cbr\u003e\nAn innovative conical center pin is inserted into the center of the top surface of the block. A perfect fit is achieved by combining it with the \"surface lock U-bolt\" which boasts strong holding power.\u003cbr\u003e\u003cbr\u003e\n\n?A variety of innovative and unique functions!\u003cbr\u003e\u003cbr\u003e\n? Axle guide\u003cbr\u003e\nSuppresses axle vibration (thrust angle) caused by misalignment in the front and rear directions. Significant improvement in straightness allows you to accurately trace the driving lane even on rough roads.\u003cbr\u003e\u003cbr\u003e\n?Angle adjustment function\u003cbr\u003e\nOptimizes the axle inclination angle in sync with the angle change of the leaf spring. Reduces the burden on the transmission and propeller shaft.\u003cbr\u003e\u003cbr\u003e\nCentering function:\u003cbr\u003e\nAdjusts the axle offset to the driver's seat side to the center of the vehicle. Allows for a perfect flush setting.\u003cbr\u003e\u003cbr\u003e\nOff-center correction function:\u003cbr\u003e\nCorrects the forward movement of the axle and corrects the wheel position to the center of the fender arch.\u003cbr\u003e\n\nMultiple sizes are available every 0.5 inches (12.5 mm)!\u003cbr\u003e\nVehicle height changes depending on the leaf spring specifications and load. A wide range of sizes allows you to set up the vehicle height exactly as you want it.\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4\u003c!--split--\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4"}

{"id":8158054711478,"title":"MoonFace - GenB Height Down Block Kit [2.5 inches\/-62.5 mm] - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K","handle":"moonface-genb-height-down-block-kit-2-5-inches-62-5-mm-toyota-hiace-trh-kdh-gdh200-series-trh200k-sdb25h","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: MoonFace\u003cbr\u003eReference Number: SDB25H\u003cbr\u003eType: Rear -62.5mm Steel Lowering Block\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe \"Height Down Block Kit\" is a kit of down blocks and U-bolts required to lower a Hiace. By making the block body multifunctional, we have completely overcome the shortcomings that could not be compensated for with conventional products.\u003cbr\u003e\n\n?A bold and elegant form born from the pursuit of increased strength and weight reduction!\u003cbr\u003e\nThe block body is made of A6061 aluminum extrusion material, which is lightweight and highly rigid. After cutting with a CNC lathe, it is shot blasted and black anodized.\u003cbr\u003e\u003cbr\u003e\n\n?Uses the patented \"fitting cone\" technology, which enables unprecedented assembly precision!\u003cbr\u003e\nAn innovative conical center pin is inserted into the center of the top surface of the block. A perfect fit is achieved by combining it with the \"surface lock U-bolt\" which boasts strong holding power.\u003cbr\u003e\u003cbr\u003e\n\n?A variety of innovative and unique functions!\u003cbr\u003e\u003cbr\u003e\n? Axle guide\u003cbr\u003e\nSuppresses axle vibration (thrust angle) caused by misalignment in the front and rear directions. Significant improvement in straightness allows you to accurately trace the driving lane even on rough roads.\u003cbr\u003e\u003cbr\u003e\n?Angle adjustment function\u003cbr\u003e\nOptimizes the axle inclination angle in sync with the angle change of the leaf spring. Reduces the burden on the transmission and propeller shaft.\u003cbr\u003e\u003cbr\u003e\nCentering function:\u003cbr\u003e\nAdjusts the axle offset to the driver's seat side to the center of the vehicle. Allows for a perfect flush setting.\u003cbr\u003e\u003cbr\u003e\nOff-center correction function:\u003cbr\u003e\nCorrects the forward movement of the axle and corrects the wheel position to the center of the fender arch.\u003cbr\u003e\n\nMultiple sizes are available every 0.5 inches (12.5 mm)!\u003cbr\u003e\nVehicle height changes depending on the leaf spring specifications and load. A wide range of sizes allows you to set up the vehicle height exactly as you want it.\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4\u003c!--split--\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4","published_at":"2025-02-27T15:59:41+08:00","created_at":"2025-02-27T15:57:44+08:00","vendor":"MoonFace","type":"Bars and Braces","tags":["-62.5mm","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","bars-and-braces","hiace-van-trh200k-2004-2018-na-1tr-fe-i4","JP1","lowering-block","moonface","moonface20","rear","steel","toyota","TRH200K","ws112"],"price":32140,"price_min":32140,"price_max":32140,"available":true,"price_varies":false,"compare_at_price":32900,"compare_at_price_min":32900,"compare_at_price_max":32900,"compare_at_price_varies":false,"variants":[{"id":43812855054518,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SDB25H","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"MoonFace - GenB Height Down Block Kit [2.5 inches\/-62.5 mm] - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K","public_title":null,"options":["Default Title"],"price":32140,"weight":4000,"compare_at_price":32900,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/408-2_3aed9b53-90b8-4692-9450-7d5aef3da096.jpg?v=1740643065"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/408-2_3aed9b53-90b8-4692-9450-7d5aef3da096.jpg?v=1740643065","options":["Title"],"media":[{"alt":"MoonFace - GenB Height Down Block Kit [2.5 inches\/-62.5 mm] - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K - SDB25H","id":29133781303478,"position":1,"preview_image":{"aspect_ratio":1.501,"height":533,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/408-2_3aed9b53-90b8-4692-9450-7d5aef3da096.jpg?v=1740643065"},"aspect_ratio":1.501,"height":533,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/408-2_3aed9b53-90b8-4692-9450-7d5aef3da096.jpg?v=1740643065","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: MoonFace\u003cbr\u003eReference Number: SDB25H\u003cbr\u003eType: Rear -62.5mm Steel Lowering Block\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe \"Height Down Block Kit\" is a kit of down blocks and U-bolts required to lower a Hiace. By making the block body multifunctional, we have completely overcome the shortcomings that could not be compensated for with conventional products.\u003cbr\u003e\n\n?A bold and elegant form born from the pursuit of increased strength and weight reduction!\u003cbr\u003e\nThe block body is made of A6061 aluminum extrusion material, which is lightweight and highly rigid. After cutting with a CNC lathe, it is shot blasted and black anodized.\u003cbr\u003e\u003cbr\u003e\n\n?Uses the patented \"fitting cone\" technology, which enables unprecedented assembly precision!\u003cbr\u003e\nAn innovative conical center pin is inserted into the center of the top surface of the block. A perfect fit is achieved by combining it with the \"surface lock U-bolt\" which boasts strong holding power.\u003cbr\u003e\u003cbr\u003e\n\n?A variety of innovative and unique functions!\u003cbr\u003e\u003cbr\u003e\n? Axle guide\u003cbr\u003e\nSuppresses axle vibration (thrust angle) caused by misalignment in the front and rear directions. Significant improvement in straightness allows you to accurately trace the driving lane even on rough roads.\u003cbr\u003e\u003cbr\u003e\n?Angle adjustment function\u003cbr\u003e\nOptimizes the axle inclination angle in sync with the angle change of the leaf spring. Reduces the burden on the transmission and propeller shaft.\u003cbr\u003e\u003cbr\u003e\nCentering function:\u003cbr\u003e\nAdjusts the axle offset to the driver's seat side to the center of the vehicle. Allows for a perfect flush setting.\u003cbr\u003e\u003cbr\u003e\nOff-center correction function:\u003cbr\u003e\nCorrects the forward movement of the axle and corrects the wheel position to the center of the fender arch.\u003cbr\u003e\n\nMultiple sizes are available every 0.5 inches (12.5 mm)!\u003cbr\u003e\nVehicle height changes depending on the leaf spring specifications and load. A wide range of sizes allows you to set up the vehicle height exactly as you want it.\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4\u003c!--split--\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4"}

{"id":8158054547638,"title":"MoonFace - GenB Height Height Down Block Kit [1.5 inch\/-37.5 mm] - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K","handle":"moonface-genb-height-height-down-block-kit-1-5-inch-37-5-mm-toyota-hiace-trh-kdh-gdh200-series-trh200k-sdb15h","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: MoonFace\u003cbr\u003eReference Number: SDB15H\u003cbr\u003eType: Rear -37.5mm Steel Lowering Block\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe \"Height Down Block Kit\" is a kit of down blocks and U-bolts required to lower a Hiace. By making the block body multifunctional, we have completely overcome the shortcomings that could not be compensated for with conventional products.\u003cbr\u003e\n\n?A bold and elegant form born from the pursuit of increased strength and weight reduction!\u003cbr\u003e\nThe block body is made of A6061 aluminum extrusion material, which is lightweight and highly rigid. After cutting with a CNC lathe, it is shot blasted and black anodized.\u003cbr\u003e\u003cbr\u003e\n\n?Uses the patented \"fitting cone\" technology, which enables unprecedented assembly precision!\u003cbr\u003e\nAn innovative conical center pin is inserted into the center of the top surface of the block. A perfect fit is achieved by combining it with the \"surface lock U-bolt\" which boasts strong holding power.\u003cbr\u003e\u003cbr\u003e\n\n?A variety of innovative and unique functions!\u003cbr\u003e\u003cbr\u003e\n? Axle guide\u003cbr\u003e\nSuppresses axle vibration (thrust angle) caused by misalignment in the front and rear directions. Significant improvement in straightness allows you to accurately trace the driving lane even on rough roads.\u003cbr\u003e\u003cbr\u003e\n?Angle adjustment function\u003cbr\u003e\nOptimizes the axle inclination angle in sync with the angle change of the leaf spring. Reduces the burden on the transmission and propeller shaft.\u003cbr\u003e\u003cbr\u003e\nCentering function:\u003cbr\u003e\nAdjusts the axle offset to the driver's seat side to the center of the vehicle. Allows for a perfect flush setting.\u003cbr\u003e\u003cbr\u003e\nOff-center correction function:\u003cbr\u003e\nCorrects the forward movement of the axle and corrects the wheel position to the center of the fender arch.\u003cbr\u003e\n\nMultiple sizes are available every 0.5 inches (12.5 mm)!\u003cbr\u003e\nVehicle height changes depending on the leaf spring specifications and load. A wide range of sizes allows you to set up the vehicle height exactly as you want it.\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4\u003c!--split--\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4","published_at":"2025-02-27T15:59:41+08:00","created_at":"2025-02-27T15:57:38+08:00","vendor":"MoonFace","type":"Bars and Braces","tags":["-37.5mm","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","bars-and-braces","hiace-van-trh200k-2004-2018-na-1tr-fe-i4","JP1","lowering-block","moonface","moonface20","rear","steel","toyota","TRH200K","ws112"],"price":29880,"price_min":29880,"price_max":29880,"available":true,"price_varies":false,"compare_at_price":30400,"compare_at_price_min":30400,"compare_at_price_max":30400,"compare_at_price_varies":false,"variants":[{"id":43812854988982,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SDB15H","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"MoonFace - GenB Height Height Down Block Kit [1.5 inch\/-37.5 mm] - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K","public_title":null,"options":["Default Title"],"price":29880,"weight":4000,"compare_at_price":30400,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/408-2_c89cd662-f75f-45e1-b78d-49e948074bdf.jpg?v=1740643058"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/408-2_c89cd662-f75f-45e1-b78d-49e948074bdf.jpg?v=1740643058","options":["Title"],"media":[{"alt":"MoonFace - GenB Height Height Down Block Kit [1.5 inch\/-37.5 mm] - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K - SDB15H","id":29133781237942,"position":1,"preview_image":{"aspect_ratio":1.501,"height":533,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/408-2_c89cd662-f75f-45e1-b78d-49e948074bdf.jpg?v=1740643058"},"aspect_ratio":1.501,"height":533,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/408-2_c89cd662-f75f-45e1-b78d-49e948074bdf.jpg?v=1740643058","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: MoonFace\u003cbr\u003eReference Number: SDB15H\u003cbr\u003eType: Rear -37.5mm Steel Lowering Block\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe \"Height Down Block Kit\" is a kit of down blocks and U-bolts required to lower a Hiace. By making the block body multifunctional, we have completely overcome the shortcomings that could not be compensated for with conventional products.\u003cbr\u003e\n\n?A bold and elegant form born from the pursuit of increased strength and weight reduction!\u003cbr\u003e\nThe block body is made of A6061 aluminum extrusion material, which is lightweight and highly rigid. After cutting with a CNC lathe, it is shot blasted and black anodized.\u003cbr\u003e\u003cbr\u003e\n\n?Uses the patented \"fitting cone\" technology, which enables unprecedented assembly precision!\u003cbr\u003e\nAn innovative conical center pin is inserted into the center of the top surface of the block. A perfect fit is achieved by combining it with the \"surface lock U-bolt\" which boasts strong holding power.\u003cbr\u003e\u003cbr\u003e\n\n?A variety of innovative and unique functions!\u003cbr\u003e\u003cbr\u003e\n? Axle guide\u003cbr\u003e\nSuppresses axle vibration (thrust angle) caused by misalignment in the front and rear directions. Significant improvement in straightness allows you to accurately trace the driving lane even on rough roads.\u003cbr\u003e\u003cbr\u003e\n?Angle adjustment function\u003cbr\u003e\nOptimizes the axle inclination angle in sync with the angle change of the leaf spring. Reduces the burden on the transmission and propeller shaft.\u003cbr\u003e\u003cbr\u003e\nCentering function:\u003cbr\u003e\nAdjusts the axle offset to the driver's seat side to the center of the vehicle. Allows for a perfect flush setting.\u003cbr\u003e\u003cbr\u003e\nOff-center correction function:\u003cbr\u003e\nCorrects the forward movement of the axle and corrects the wheel position to the center of the fender arch.\u003cbr\u003e\n\nMultiple sizes are available every 0.5 inches (12.5 mm)!\u003cbr\u003e\nVehicle height changes depending on the leaf spring specifications and load. A wide range of sizes allows you to set up the vehicle height exactly as you want it.\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4\u003c!--split--\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4"}

{"id":7048398438582,"title":"MoonFace - GenB Hyper Torsion Bolt Kit - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K","handle":"moonface-genb-hyper-torsion-bolt-kit-toyota-hiace-trh-kdh-gdh200-series-trh200k-sdtbkh","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: MoonFace\u003cbr\u003eReference Number: SDTBKH\u003cbr\u003eType: Rear Bolt Kits\u003cbr\u003e\u003cbr\u003eSpeaking of items that are directly related to the Hiace lowdown, the down block that is sandwiched between the rear axle and the leaf spring is common. But what about the front desk? Normally, the vehicle height is changed by adjusting the angle of the anchor arm that fixes the torsion bar to the body side. In addition, the mechanism is standard on the Hiace, and the structure itself is simple and does not cause any problems. However, it is also a fact that strength problems occur when the adjustment work is repeated or when the torsion bar is changed to a reinforced type. Therefore, we have developed an anchor arm adjustment bolt that thoroughly pursues strength and workability.\u003cbr\u003e\u003cbr\u003e\n\n? The strongest vehicle height adjustment system reviewed from the basic design!\u003cbr\u003e\u003cbr\u003e\nBased on tough chrome molybdenum steel, the bolt diameter has been expanded from M12 to M14. Furthermore, by reviewing each component such as the nut from the basic design, we have built the strongest vehicle height adjustment system that does not have to worry about breakage or breakage even if it is roughly hit.\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4\u003c!--split--\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4","published_at":"2021-09-23T10:49:39+08:00","created_at":"2021-09-23T10:49:41+08:00","vendor":"MoonFace","type":"Bars and Braces","tags":["2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","bars-and-braces","bolt-kits","hiace-van-trh200k-2004-2018-na-1tr-fe-i4","jp1","moonface","moonface20","rear","toyota","TRH200K","ws16"],"price":11840,"price_min":11840,"price_max":11840,"available":true,"price_varies":false,"compare_at_price":11200,"compare_at_price_min":11200,"compare_at_price_max":11200,"compare_at_price_varies":false,"variants":[{"id":40629288075446,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SDTBKH","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"MoonFace - GenB Hyper Torsion Bolt Kit - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K","public_title":null,"options":["Default Title"],"price":11840,"weight":13600,"compare_at_price":11200,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/moonface-genb-hyper-torsion-bolt-kit-toyota-hiace-trh-kdh-gdh200-series-trh200k-rzcrew-1.jpg?v=1710323031","\/\/rzcrewgarage.com\/cdn\/shop\/products\/moonface-genb-hyper-torsion-bolt-kit-toyota-hiace-trh-kdh-gdh200-series-trh200k-rzcrew-2.jpg?v=1710323033"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/moonface-genb-hyper-torsion-bolt-kit-toyota-hiace-trh-kdh-gdh200-series-trh200k-rzcrew-1.jpg?v=1710323031","options":["Title"],"media":[{"alt":"MoonFace - GenB Hyper Torsion Bolt Kit - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K - SDTBKH","id":26644197671094,"position":1,"preview_image":{"aspect_ratio":1.499,"height":533,"width":799,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/moonface-genb-hyper-torsion-bolt-kit-toyota-hiace-trh-kdh-gdh200-series-trh200k-rzcrew-1.jpg?v=1710323031"},"aspect_ratio":1.499,"height":533,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/moonface-genb-hyper-torsion-bolt-kit-toyota-hiace-trh-kdh-gdh200-series-trh200k-rzcrew-1.jpg?v=1710323031","width":799},{"alt":"MoonFace - GenB Hyper Torsion Bolt Kit - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K - [variant sku] - RZCrewGarage","id":26644197703862,"position":2,"preview_image":{"aspect_ratio":1.501,"height":533,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/moonface-genb-hyper-torsion-bolt-kit-toyota-hiace-trh-kdh-gdh200-series-trh200k-rzcrew-2.jpg?v=1710323033"},"aspect_ratio":1.501,"height":533,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/moonface-genb-hyper-torsion-bolt-kit-toyota-hiace-trh-kdh-gdh200-series-trh200k-rzcrew-2.jpg?v=1710323033","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: MoonFace\u003cbr\u003eReference Number: SDTBKH\u003cbr\u003eType: Rear Bolt Kits\u003cbr\u003e\u003cbr\u003eSpeaking of items that are directly related to the Hiace lowdown, the down block that is sandwiched between the rear axle and the leaf spring is common. But what about the front desk? Normally, the vehicle height is changed by adjusting the angle of the anchor arm that fixes the torsion bar to the body side. In addition, the mechanism is standard on the Hiace, and the structure itself is simple and does not cause any problems. However, it is also a fact that strength problems occur when the adjustment work is repeated or when the torsion bar is changed to a reinforced type. Therefore, we have developed an anchor arm adjustment bolt that thoroughly pursues strength and workability.\u003cbr\u003e\u003cbr\u003e\n\n? The strongest vehicle height adjustment system reviewed from the basic design!\u003cbr\u003e\u003cbr\u003e\nBased on tough chrome molybdenum steel, the bolt diameter has been expanded from M12 to M14. Furthermore, by reviewing each component such as the nut from the basic design, we have built the strongest vehicle height adjustment system that does not have to worry about breakage or breakage even if it is roughly hit.\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4\u003c!--split--\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4"}

{"id":8120922374326,"title":"MoonFace - GenB MAG Drain bolt Type DIFF (Gold) - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K","handle":"moonface-genb-mag-drain-bolt-type-diff-gold-toyota-hiace-trh-kdh-gdh200-series-trh200k-edb04gs","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: MoonFace\u003cbr\u003eReference Number: EDB04GS\u003cbr\u003eType: Rear Drain Plug\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eMAG drain bolt ” adsorbs steel flakes precipitated to the bottom of the differential carrier, delivering 100% gear oil performance even under harsh conditions. Adopts a shield type small magnet that generates more than 4,000 Gauss ? 0.4 Tesla ? strong magnetic force and is embedded in an aluminum alloy drain bolt. The hexagonal head, which gives off a beautiful luster through anodizing, also contributes to the dress-up of the underbody.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4\u003c!--split--\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4","published_at":"2024-12-06T10:50:01+08:00","created_at":"2024-12-06T10:47:12+08:00","vendor":"MoonFace","type":"Drain Plugs","tags":["2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","drain-plug","drain-plugs","hiace-van-trh200k-2004-2018-na-1tr-fe-i4","JP1","moonface","moonface20","rear","toyota","TRH200K","ws114"],"price":2325,"price_min":2325,"price_max":2325,"available":true,"price_varies":false,"compare_at_price":2500,"compare_at_price_min":2500,"compare_at_price_max":2500,"compare_at_price_varies":false,"variants":[{"id":43656483078326,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"EDB04GS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"MoonFace - GenB MAG Drain bolt Type DIFF (Gold) - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K","public_title":null,"options":["Default Title"],"price":2325,"weight":1000,"compare_at_price":2500,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/283-1_c886995b-cc81-48dc-8868-837182f6766f.jpg?v=1733453232"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/283-1_c886995b-cc81-48dc-8868-837182f6766f.jpg?v=1733453232","options":["Title"],"media":[{"alt":"MoonFace - GenB MAG Drain bolt Type DIFF (Gold) - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K - EDB04GS","id":28841700982966,"position":1,"preview_image":{"aspect_ratio":1.501,"height":533,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/283-1_c886995b-cc81-48dc-8868-837182f6766f.jpg?v=1733453232"},"aspect_ratio":1.501,"height":533,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/283-1_c886995b-cc81-48dc-8868-837182f6766f.jpg?v=1733453232","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: MoonFace\u003cbr\u003eReference Number: EDB04GS\u003cbr\u003eType: Rear Drain Plug\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eMAG drain bolt ” adsorbs steel flakes precipitated to the bottom of the differential carrier, delivering 100% gear oil performance even under harsh conditions. Adopts a shield type small magnet that generates more than 4,000 Gauss ? 0.4 Tesla ? strong magnetic force and is embedded in an aluminum alloy drain bolt. The hexagonal head, which gives off a beautiful luster through anodizing, also contributes to the dress-up of the underbody.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4\u003c!--split--\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4"}

{"id":8124728246454,"title":"MoonFace - GenB RC Joint B\/E - Toyota - Hiace Van TRH200K","handle":"moonface-genb-rc-joint-b-e-toyota-trh200k-sab01bh","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: MoonFace\u003cbr\u003ePosition: Front\u003cbr\u003eCamber Adjustment Range: \u003cbr\u003e\u003cbr\u003eThe Hiace is very popular among a wide range of age groups due to its ease of use and styling. Like other car models, lowering the car and installing large diameter wheels has become the basic customization method. However, in exchange for the powerful styling, it is true that many users are troubled by the ride quality that is not very comfortable. This is the perfect time to use the \"RC Joint\". There is no need to give up on both styling and ride quality. By correcting the roll center that has been disturbed by lowering the car, the roll, which is a weakness of the Hiace with a high center of gravity, is physically reduced, improving the driving performance and improving the uncomfortable ride quality at once.\u003cbr\u003e\n\n?The effect of geometry correction is tremendous!\u003cbr\u003e\nCorrects the roll center that has been disturbed by lowering the car. By restoring the original performance of the suspension, it maximizes its function as a shock absorber.\u003cbr\u003e\u003cbr\u003e\n\n?The fun of driving on rough roads and cornering is doubled!\u003cbr\u003e\nNot only does it improve handling and the grip of the front tires, it also physically suppresses the roll, which is a weakness of the Hiace with a high center of gravity. The sluggish and sluggish movement has been completely transformed.\u003cbr\u003e\u003cbr\u003e\n\n?In addition to eliminating bottoming out of the damper, it also contributes to optimizing the stabilizer position!\u003cbr\u003e\nThe reduction in bump stroke is said to be a fatal flaw of the low-down Hiace. By improving the lower arm angle by extending the ball stud, the bump stroke is secured while the stabilizer position is also corrected.\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4\u003c!--split--\u003e","published_at":"2024-12-13T10:31:14+08:00","created_at":"2024-12-13T10:29:33+08:00","vendor":"MoonFace","type":"Camber Kits and Alignement","tags":["2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","camber-kits-and-alignement","front","hiace-van-trh200k-2004-2018-na-1tr-fe-i4","JP1","moonface","roll-center-adjuster","toyota","ws16"],"price":45396,"price_min":45396,"price_max":45396,"available":true,"price_varies":false,"compare_at_price":46800,"compare_at_price_min":46800,"compare_at_price_max":46800,"compare_at_price_varies":false,"variants":[{"id":43668794540214,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SAB01BH","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"MoonFace - GenB RC Joint B\/E - Toyota - Hiace Van TRH200K","public_title":null,"options":["Default Title"],"price":45396,"weight":3000,"compare_at_price":46800,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/1164-1_a23ff2c3-40f7-4dd3-b68a-385fd6531889.jpg?v=1734057004"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/1164-1_a23ff2c3-40f7-4dd3-b68a-385fd6531889.jpg?v=1734057004","options":["Title"],"media":[{"alt":"MoonFace - MoonFace - GenB RC Joint B\/E - Toyota - TRH200K - SAB01BH - Rzcrewgarage","id":28861618159798,"position":1,"preview_image":{"aspect_ratio":1.501,"height":533,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/1164-1_a23ff2c3-40f7-4dd3-b68a-385fd6531889.jpg?v=1734057004"},"aspect_ratio":1.501,"height":533,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/1164-1_a23ff2c3-40f7-4dd3-b68a-385fd6531889.jpg?v=1734057004","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: MoonFace\u003cbr\u003ePosition: Front\u003cbr\u003eCamber Adjustment Range: \u003cbr\u003e\u003cbr\u003eThe Hiace is very popular among a wide range of age groups due to its ease of use and styling. Like other car models, lowering the car and installing large diameter wheels has become the basic customization method. However, in exchange for the powerful styling, it is true that many users are troubled by the ride quality that is not very comfortable. This is the perfect time to use the \"RC Joint\". There is no need to give up on both styling and ride quality. By correcting the roll center that has been disturbed by lowering the car, the roll, which is a weakness of the Hiace with a high center of gravity, is physically reduced, improving the driving performance and improving the uncomfortable ride quality at once.\u003cbr\u003e\n\n?The effect of geometry correction is tremendous!\u003cbr\u003e\nCorrects the roll center that has been disturbed by lowering the car. By restoring the original performance of the suspension, it maximizes its function as a shock absorber.\u003cbr\u003e\u003cbr\u003e\n\n?The fun of driving on rough roads and cornering is doubled!\u003cbr\u003e\nNot only does it improve handling and the grip of the front tires, it also physically suppresses the roll, which is a weakness of the Hiace with a high center of gravity. The sluggish and sluggish movement has been completely transformed.\u003cbr\u003e\u003cbr\u003e\n\n?In addition to eliminating bottoming out of the damper, it also contributes to optimizing the stabilizer position!\u003cbr\u003e\nThe reduction in bump stroke is said to be a fatal flaw of the low-down Hiace. By improving the lower arm angle by extending the ball stud, the bump stroke is secured while the stabilizer position is also corrected.\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4\u003c!--split--\u003e"}

{"id":8158054285494,"title":"MoonFace - GenB Rear Frame Support Brace - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K","handle":"moonface-genb-rear-frame-support-brace-toyota-hiace-trh-kdh-gdh200-series-trh200k-oub16h","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: MoonFace\u003cbr\u003eReference Number: OUB16H\u003cbr\u003eType: Rear 3 Points Steel Braces\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAs you know, the basic design of the Hiace is a \"commercial van\". Because the design prioritizes the luggage space, it does not necessarily have sufficient strength for the cross-sectional area of ??the body. The \"frame support brace\" is a reinforcement item that connects the left and right frames with a thick oval shaft that is lightweight and highly rigid, improving the body rigidity without sacrificing the loading space.\u003cbr\u003e\u003cbr\u003e\n\n? Body reinforcement that is faithful to the basics proves the true value of increased rigidity!\u003cbr\u003e\nThe body with increased rigidity transmits the movement of the suspension to the road surface without loss, demonstrating light footwork and outstanding turning ability that you would not expect from a large vehicle.\u003cbr\u003e\u003cbr\u003e\n\n? The difference is clear! Impressive straight-line stability!\u003cbr\u003e\nThe platform is firmly and securely joined by the \"frame support brace\". By actively controlling the twisting of the body, we promise stable driving that is not affected by crosswinds.\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4\u003c!--split--\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4","published_at":"2025-02-27T15:59:06+08:00","created_at":"2025-02-27T15:57:23+08:00","vendor":"MoonFace","type":"Bars and Braces","tags":["2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","3-points","bars-and-braces","braces","hiace-van-trh200k-2004-2018-na-1tr-fe-i4","JP1","moonface","moonface20","rear","steel","toyota","TRH200K","ws111"],"price":44540,"price_min":44540,"price_max":44540,"available":true,"price_varies":false,"compare_at_price":45000,"compare_at_price_min":45000,"compare_at_price_max":45000,"compare_at_price_varies":false,"variants":[{"id":43812854792374,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"OUB16H","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"MoonFace - GenB Rear Frame Support Brace - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K","public_title":null,"options":["Default Title"],"price":44540,"weight":9000,"compare_at_price":45000,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/377-1_281d7bdc-a3d7-4c94-8a33-66e7b8af6b11.jpg?v=1740643043"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/377-1_281d7bdc-a3d7-4c94-8a33-66e7b8af6b11.jpg?v=1740643043","options":["Title"],"media":[{"alt":"MoonFace - GenB Rear Frame Support Brace - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K - OUB16H","id":29133781106870,"position":1,"preview_image":{"aspect_ratio":1.499,"height":533,"width":799,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/377-1_281d7bdc-a3d7-4c94-8a33-66e7b8af6b11.jpg?v=1740643043"},"aspect_ratio":1.499,"height":533,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/377-1_281d7bdc-a3d7-4c94-8a33-66e7b8af6b11.jpg?v=1740643043","width":799}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: MoonFace\u003cbr\u003eReference Number: OUB16H\u003cbr\u003eType: Rear 3 Points Steel Braces\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAs you know, the basic design of the Hiace is a \"commercial van\". Because the design prioritizes the luggage space, it does not necessarily have sufficient strength for the cross-sectional area of ??the body. The \"frame support brace\" is a reinforcement item that connects the left and right frames with a thick oval shaft that is lightweight and highly rigid, improving the body rigidity without sacrificing the loading space.\u003cbr\u003e\u003cbr\u003e\n\n? Body reinforcement that is faithful to the basics proves the true value of increased rigidity!\u003cbr\u003e\nThe body with increased rigidity transmits the movement of the suspension to the road surface without loss, demonstrating light footwork and outstanding turning ability that you would not expect from a large vehicle.\u003cbr\u003e\u003cbr\u003e\n\n? The difference is clear! Impressive straight-line stability!\u003cbr\u003e\nThe platform is firmly and securely joined by the \"frame support brace\". By actively controlling the twisting of the body, we promise stable driving that is not affected by crosswinds.\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4\u003c!--split--\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4"}

{"id":8120922144950,"title":"MoonFace - GenB Tuned stabilizer - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K","handle":"moonface-genb-tuned-stabilizer-toyota-hiace-trh-kdh-gdh200-series-trh200k-ssr11h","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: MoonFace\u003cbr\u003eReference Number: SSR11H\u003cbr\u003eType: Front 2 Points Steel Anti Roll Bars\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e? Experience a different dimension of cornering force that is integrated with the road surface!?\nThis is a masterpiece made entirely of strong SUP materials with excellent impact and fatigue resistance, and each piece is hand-molded by skilled workers with outstanding technology. The rate settings and unique features derived from repeated driving tests will definitely improve Hiace's potential.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4\u003c!--split--\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4","published_at":"2024-12-06T10:49:32+08:00","created_at":"2024-12-06T10:47:00+08:00","vendor":"MoonFace","type":"Bars and Braces","tags":["2-points","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","anti-roll-bars","bars-and-braces","front","hiace-van-trh200k-2004-2018-na-1tr-fe-i4","JP1","moonface","moonface20","steel","toyota","TRH200K","ws114"],"price":55893,"price_min":55893,"price_max":55893,"available":true,"price_varies":false,"compare_at_price":60100,"compare_at_price_min":60100,"compare_at_price_max":60100,"compare_at_price_varies":false,"variants":[{"id":43656482783414,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SSR11H","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"MoonFace - GenB Tuned stabilizer - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K","public_title":null,"options":["Default Title"],"price":55893,"weight":13600,"compare_at_price":60100,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/1093-1_9e78e59a-493f-447a-97f5-6f86d54ad434.jpg?v=1733453220"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/1093-1_9e78e59a-493f-447a-97f5-6f86d54ad434.jpg?v=1733453220","options":["Title"],"media":[{"alt":"MoonFace - GenB Tuned stabilizer - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K - SSR11H","id":28841700753590,"position":1,"preview_image":{"aspect_ratio":1.499,"height":533,"width":799,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/1093-1_9e78e59a-493f-447a-97f5-6f86d54ad434.jpg?v=1733453220"},"aspect_ratio":1.499,"height":533,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/1093-1_9e78e59a-493f-447a-97f5-6f86d54ad434.jpg?v=1733453220","width":799}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: MoonFace\u003cbr\u003eReference Number: SSR11H\u003cbr\u003eType: Front 2 Points Steel Anti Roll Bars\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e? Experience a different dimension of cornering force that is integrated with the road surface!?\nThis is a masterpiece made entirely of strong SUP materials with excellent impact and fatigue resistance, and each piece is hand-molded by skilled workers with outstanding technology. The rate settings and unique features derived from repeated driving tests will definitely improve Hiace's potential.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4\u003c!--split--\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4"}

{"id":7048398340278,"title":"MoonFace - GenB Tuned torsion bar [Diam 27.5] - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K","handle":"moonface-genb-tuned-torsion-bar-diam-27-5-toyota-hiace-trh-kdh-gdh200-series-trh200k-sts01hh","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: MoonFace\u003cbr\u003eReference Number: STS01HH\u003cbr\u003eType: Rear 2 Points Steel Anti Roll Bars\u003cbr\u003e\u003cbr\u003eFor 2WD Hiace only, which adopts a cab-over type body structure, the secret to eliminating that weak point was the rate selection and setup method of the torsion bar. When you experience the sensation of manipulating a heavy body at will, your preconceived notions will be overturned.\u003cbr\u003e\u003cbr\u003e\n\n? Control posture changes during driving!\u003cbr\u003e\nSpring rate related to the absolute amount of pitching in the front-back direction and rolling in the left-right direction. By changing the rate according to the intended use, the unstable and slow driving feeling is dramatically improved.\u003cbr\u003e\u003cbr\u003e\n\n? Multiple spring constants are available for each drive system!\u003cbr\u003e\nA tough torsion bar spring spun from highly elastic spring steel. Four different rates are set for the Hiace, which has a wide variety of body shapes.\u003cbr\u003e\u003cbr\u003e\n\n? It is essential to review the basic rate for low-down vehicles!\u003cbr\u003e\nRate-up is effective for low-down vehicles that tend to lack bump strokes. Optimizing the basic rate is indispensable for compensating for insufficient twist and improving footwork.\u003cbr\u003e\u003cbr\u003e\n\n? The setup including the rebump stopper is the key!\u003cbr\u003e\nThe most important item with the change of the torsion bar is the rebump stopper that suppresses the repulsion due to the rate increase. The setting not only affects the ride quality, but also greatly affects the basic performance of the suspension.\u003cbr\u003e\u003cbr\u003e\n\n? A sense of security unique to genuine suppliers!\u003cbr\u003e\nOutsourced manufacturing to Chuo Spring Co., Ltd., which supplies automobile manufacturers with products that meet strict quality standards. The \"CHUHATSU\" logo printed on the package is proof of trust.\u003cbr\u003e\u003cbr\u003eBetter to purchase MoonFace Genb SDTBKH with this kit.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4\u003c!--split--\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4","published_at":"2021-09-23T10:49:37+08:00","created_at":"2021-09-23T10:49:38+08:00","vendor":"MoonFace","type":"Bars and Braces","tags":["2-points","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","anti-roll-bars","bars-and-braces","hiace-van-trh200k-2004-2018-na-1tr-fe-i4","jp1","moonface","moonface20","rear","steel","toyota","TRH200K","ws112"],"price":44000,"price_min":44000,"price_max":44000,"available":true,"price_varies":false,"compare_at_price":44700,"compare_at_price_min":44700,"compare_at_price_max":44700,"compare_at_price_varies":false,"variants":[{"id":40629287846070,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"STS01HH","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"MoonFace - GenB Tuned torsion bar [Diam 27.5] - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K","public_title":null,"options":["Default Title"],"price":44000,"weight":13600,"compare_at_price":44700,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/moonface-genb-tuned-torsion-bar-diam-27-5-toyota-hiace-trh-kdh-gdh200-series-trh200k-rzcrew.jpg?v=1710323032"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/moonface-genb-tuned-torsion-bar-diam-27-5-toyota-hiace-trh-kdh-gdh200-series-trh200k-rzcrew.jpg?v=1710323032","options":["Title"],"media":[{"alt":"MoonFace - GenB Tuned torsion bar [Diam 27.5] - Toyota Hiace TRH \/ KDH \/ GDH200 series TRH200K - STS01HH","id":26644197605558,"position":1,"preview_image":{"aspect_ratio":1.499,"height":533,"width":799,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/moonface-genb-tuned-torsion-bar-diam-27-5-toyota-hiace-trh-kdh-gdh200-series-trh200k-rzcrew.jpg?v=1710323032"},"aspect_ratio":1.499,"height":533,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/moonface-genb-tuned-torsion-bar-diam-27-5-toyota-hiace-trh-kdh-gdh200-series-trh200k-rzcrew.jpg?v=1710323032","width":799}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: MoonFace\u003cbr\u003eReference Number: STS01HH\u003cbr\u003eType: Rear 2 Points Steel Anti Roll Bars\u003cbr\u003e\u003cbr\u003eFor 2WD Hiace only, which adopts a cab-over type body structure, the secret to eliminating that weak point was the rate selection and setup method of the torsion bar. When you experience the sensation of manipulating a heavy body at will, your preconceived notions will be overturned.\u003cbr\u003e\u003cbr\u003e\n\n? Control posture changes during driving!\u003cbr\u003e\nSpring rate related to the absolute amount of pitching in the front-back direction and rolling in the left-right direction. By changing the rate according to the intended use, the unstable and slow driving feeling is dramatically improved.\u003cbr\u003e\u003cbr\u003e\n\n? Multiple spring constants are available for each drive system!\u003cbr\u003e\nA tough torsion bar spring spun from highly elastic spring steel. Four different rates are set for the Hiace, which has a wide variety of body shapes.\u003cbr\u003e\u003cbr\u003e\n\n? It is essential to review the basic rate for low-down vehicles!\u003cbr\u003e\nRate-up is effective for low-down vehicles that tend to lack bump strokes. Optimizing the basic rate is indispensable for compensating for insufficient twist and improving footwork.\u003cbr\u003e\u003cbr\u003e\n\n? The setup including the rebump stopper is the key!\u003cbr\u003e\nThe most important item with the change of the torsion bar is the rebump stopper that suppresses the repulsion due to the rate increase. The setting not only affects the ride quality, but also greatly affects the basic performance of the suspension.\u003cbr\u003e\u003cbr\u003e\n\n? A sense of security unique to genuine suppliers!\u003cbr\u003e\nOutsourced manufacturing to Chuo Spring Co., Ltd., which supplies automobile manufacturers with products that meet strict quality standards. The \"CHUHATSU\" logo printed on the package is proof of trust.\u003cbr\u003e\u003cbr\u003eBetter to purchase MoonFace Genb SDTBKH with this kit.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4\u003c!--split--\u003eHiace Van | TRH200K | 2004-2018 | NA | 1TR-FE | I4"}

{"id":3854312112225,"title":"MoonFace - Superlap RC Joint - Toyota - 86 ZN6","handle":"moonface-superlap-rc-joint-toyota-zn6-sab03","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: MoonFace\u003cbr\u003ePosition: Front\u003cbr\u003eCamber Adjustment Range: \u003cbr\u003e\u003cbr\u003eWhen the car height lowered,the car may be body roll easily because the roll center has changed. If your car height is lowered , the angle of suspension arm becomes obtuse then the roll center is changed. The original efficiency of the suspension can't perform fully. Correct your Roll center with this high quality Japanese item by Moonface.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e86 | ZN6 SPEC A | 2012-2013 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC B | 2013-2014 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC C | 2014-2015 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC D | 2015-2016 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC E | 2016-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e","published_at":"2019-06-18T10:56:08+08:00","created_at":"2019-06-18T10:56:09+08:00","vendor":"MoonFace","type":"Camber Kits and Alignement","tags":["2012","2013","2014","2015","2016","2017","2018","86-zn6-spec-b-2013-2014-na-4u-gse-h4","86-zn6-spec-c-2014-2015-na-4u-gse-h4","86-zn6-spec-d-2015-2016-na-4u-gse-h4","86-zn6-spec-e-2016-2018-na-4u-gse-h4","camber-kits-and-alignement","front","jp1","moonface","roll-center-adjuster","toyota","ws15"],"price":22730,"price_min":22730,"price_max":22730,"available":true,"price_varies":false,"compare_at_price":22300,"compare_at_price_min":22300,"compare_at_price_max":22300,"compare_at_price_varies":false,"variants":[{"id":29153319714913,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SAB03","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"MoonFace - Superlap RC Joint - Toyota - 86 ZN6","public_title":null,"options":["Default Title"],"price":22730,"weight":1500,"compare_at_price":22300,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SAB03.jpg?v=1710181566"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SAB03.jpg?v=1710181566","options":["Title"],"media":[{"alt":"MoonFace - MoonFace - Superlap RC Joint - Toyota - ZN6 - SAB03 - Rzcrewgarage","id":25428831404214,"position":1,"preview_image":{"aspect_ratio":1.5,"height":226,"width":339,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SAB03.jpg?v=1710181566"},"aspect_ratio":1.5,"height":226,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SAB03.jpg?v=1710181566","width":339}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: MoonFace\u003cbr\u003ePosition: Front\u003cbr\u003eCamber Adjustment Range: \u003cbr\u003e\u003cbr\u003eWhen the car height lowered,the car may be body roll easily because the roll center has changed. If your car height is lowered , the angle of suspension arm becomes obtuse then the roll center is changed. The original efficiency of the suspension can't perform fully. Correct your Roll center with this high quality Japanese item by Moonface.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e86 | ZN6 SPEC A | 2012-2013 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC B | 2013-2014 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC C | 2014-2015 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC D | 2015-2016 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC E | 2016-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e"}