{"id":7785441558710,"title":"Recaro Japan - Base Frame Seat Rail Standard - MINI Cooper JCW\/S SJ","handle":"recaro-japan-base-frame-seat-rail-standard-mini-cooper-jcw-s-sj","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003eReference Number: 2014.063.1\/ 2014.063.2\u003cbr\u003e\u003cbr\u003ePosition: \u003cbr\u003eNew structural frame. One position type.\u003cbr\u003eNotes and Remarks:\u003cbr\u003e(Note) It cannot be installed on seats other than those listed in the matching information below. sports frame. R55, R56, R57?side airbag canceller included.\nWhen installing RECARO on the passenger seat, separately sold parts are required. Please refer to the special notes below.\u003cbr\u003e\u003cbr\u003eThe genuine seat built-in side airbag function will no longer be available. Airbag warning light needs to be turned off. The seating position is approximately 5mm lower than the lowest position of the genuine seat (when using ST-JJ). Seat offset, approximately 10mm on the door side (Recaro is closer to the door). The amount of rearward sliding is reduced by approximately 25mm compared to the original. If you want to install a Recaro seat on the passenger seat, you will need to install the separately sold naviseat selector type 2-A product number 7215870\u003cbr\u003e\u003cbr\u003eSP-# requires SP-G offset adapter set \u003cproduct number\u003e. The shoulder part interferes with the B pillar by approximately 5 to 10 mm. The shoulder part of SP-#N interferes with the B pillar by about 5 to 10 mm. Trend-J, JJ, JC, D, and DC have approximately 5-10mm interference between the backrest side and door armrest. For the RS\/TS-# series, the handle offset can be adjusted in 5mm increments from 5mm to a maximum of 15mm using the RS\/TS-G offset adapter set \u003cproduct number\u003e. (When installing, please consult your retailer to avoid interference with the console side (shift, etc.)) The RMS can be adjusted to the optimal position (front\/rear height, left\/right offset 0\/5\/10 mm) using the separately sold RMS side adapter. Please put it on. Also, if there is interference with the interior, it can be alleviated by adjustment. Please adjust the RCS to the optimal position (front\/rear height, left\/right offset 0\/5\/10mm) using the separately sold RCS side adapter and install it.\u003cbr\u003e\u003cbr\u003e Seat Fitting:\u003cbr\u003e This seat rail fits:\u003cbr\u003e\u003cbr\u003eLX \/ LX- # \/ LX-VS \/ LX-VF \/ LX-VL \/ Ergomed \/ Ergomed C \/ Ergomed D \/ Ergomed E \/ Ergomed LD \/ Ergomed MV (IS-84 base)\u003cbr\u003e\t\nLX-F (based on IS-05)\u003cbr\u003e\t\nLS \/ LS- # \/ LT- #\t\u003cbr\u003e\nRMS2600A \/ 2700G\tYou need to prepare the side adapter separately.\u003cbr\u003e\nNew Orthopedo (with Recaro Vent)\u003cbr\u003e\t\nRCS\tYou need to prepare the side adapter separately.\u003cbr\u003e\nSR-2 late model \/ SR-3 \/ SR-4 \/ SR-5 \/ SR-VF \/ SR-IMPACT \/ SR-IMPACT Pro\u003cbr\u003e\t\nSP-A \/ SP-G \/ SP-G2 \/ SP-G3 \/ SP-GT \/ SP-GT2\tYou need to prepare the side adapter separately.\u003cbr\u003e\nAM19 TREND-J\u003cbr\u003e\nAM19 TREND-JJ\u003cbr\u003e\nAM19 TREND-JC\u003cbr\u003e\t\nAM19 STYLE-J\u003cbr\u003e\nAM19 STYLE-JJ\u003cbr\u003e\nAM19 STYLE-JC\u003cbr\u003e\t\nAM19 SPORT-J\u003cbr\u003e\nAM19 SPORT-JJ\u003cbr\u003e\nAM19 SPORT-JC\u003cbr\u003e\t\nAM19 TREND-JS\u003cbr\u003e\t\nAM19 STYLE-JS\u003cbr\u003e\t\nAM19 SPORT-JS\u003cbr\u003e\t\nAM19 TREND-D\u003cbr\u003e\nAM19 TREND-DC\u003cbr\u003e\t\nAM19 STYLE-D\u003cbr\u003e\nAM19 STYLE-DC\t\u003cbr\u003e\nAM19 SPORT-D \u003cbr\u003eAM19\u003cbr\u003e\t\nTS-G \/ RS-G \/ TS-W \/ RS-W\tYou need to prepare the side adapter separately.\u003cbr\u003e\nSP-X\u003cbr\u003e\t\nSR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e\t\nSportster \/ Cross Sportster\t\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCooper S | R56 S | 2007-2014 | TC | N18B16A | I4,JCW Cooper S | R56 JCW | 2010-2014 | TC | N18B16A | I4,JCW Cooper S | R56 JCW | 2010-2014 | TC | N18B16A | I4\u003c!--split--\u003e\u003c\/product\u003e\u003c\/product\u003e","published_at":"2024-02-29T11:43:00+08:00","created_at":"2024-02-29T11:40:54+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2010","2011","2012","2013","2014","cooper-s-r56-s-2007-2014-tc-n18b16a-i4","jcw-cooper-s-r56-jcw-2010-2014-tc-n18b16a-i4","jp1","mini","R56(S)(JCW)('10)","recaro-japan","seat-rails","ws12"],"price":21266,"price_min":21266,"price_max":21266,"available":true,"price_varies":false,"compare_at_price":21700,"compare_at_price_min":21700,"compare_at_price_max":21700,"compare_at_price_varies":false,"variants":[{"id":42736646258870,"title":"Left","option1":"Left","option2":null,"option3":null,"sku":"2014.063.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard - MINI Cooper JCW\/S SJ - Left","public_title":"Left","options":["Left"],"price":21266,"weight":17000,"compare_at_price":21700,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42736646291638,"title":"Right","option1":"Right","option2":null,"option3":null,"sku":"2014.063.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard - MINI Cooper JCW\/S SJ - Right","public_title":"Right","options":["Right"],"price":21266,"weight":17000,"compare_at_price":21700,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-mini-cooper-jcws-sj-rzcrew-1.jpg?v=1710313843","\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-mini-cooper-jcws-sj-rzcrew-2.jpg?v=1710313844"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-mini-cooper-jcws-sj-rzcrew-1.jpg?v=1710313843","options":["Side"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard - MINI Cooper JCW\/S SJ","id":27299939025078,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-mini-cooper-jcws-sj-rzcrew-1.jpg?v=1710313843"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-mini-cooper-jcws-sj-rzcrew-1.jpg?v=1710313843","width":640},{"alt":"Recaro Japan - Base Frame Seat Rail Standard - MINI Cooper JCW\/S SJ - [variant sku] - RZCrewGarage","id":27299939057846,"position":2,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-mini-cooper-jcws-sj-rzcrew-2.jpg?v=1710313844"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-mini-cooper-jcws-sj-rzcrew-2.jpg?v=1710313844","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003eReference Number: 2014.063.1\/ 2014.063.2\u003cbr\u003e\u003cbr\u003ePosition: \u003cbr\u003eNew structural frame. One position type.\u003cbr\u003eNotes and Remarks:\u003cbr\u003e(Note) It cannot be installed on seats other than those listed in the matching information below. sports frame. R55, R56, R57?side airbag canceller included.\nWhen installing RECARO on the passenger seat, separately sold parts are required. Please refer to the special notes below.\u003cbr\u003e\u003cbr\u003eThe genuine seat built-in side airbag function will no longer be available. Airbag warning light needs to be turned off. The seating position is approximately 5mm lower than the lowest position of the genuine seat (when using ST-JJ). Seat offset, approximately 10mm on the door side (Recaro is closer to the door). The amount of rearward sliding is reduced by approximately 25mm compared to the original. If you want to install a Recaro seat on the passenger seat, you will need to install the separately sold naviseat selector type 2-A product number 7215870\u003cbr\u003e\u003cbr\u003eSP-# requires SP-G offset adapter set \u003cproduct number\u003e. The shoulder part interferes with the B pillar by approximately 5 to 10 mm. The shoulder part of SP-#N interferes with the B pillar by about 5 to 10 mm. Trend-J, JJ, JC, D, and DC have approximately 5-10mm interference between the backrest side and door armrest. For the RS\/TS-# series, the handle offset can be adjusted in 5mm increments from 5mm to a maximum of 15mm using the RS\/TS-G offset adapter set \u003cproduct number\u003e. (When installing, please consult your retailer to avoid interference with the console side (shift, etc.)) The RMS can be adjusted to the optimal position (front\/rear height, left\/right offset 0\/5\/10 mm) using the separately sold RMS side adapter. Please put it on. Also, if there is interference with the interior, it can be alleviated by adjustment. Please adjust the RCS to the optimal position (front\/rear height, left\/right offset 0\/5\/10mm) using the separately sold RCS side adapter and install it.\u003cbr\u003e\u003cbr\u003e Seat Fitting:\u003cbr\u003e This seat rail fits:\u003cbr\u003e\u003cbr\u003eLX \/ LX- # \/ LX-VS \/ LX-VF \/ LX-VL \/ Ergomed \/ Ergomed C \/ Ergomed D \/ Ergomed E \/ Ergomed LD \/ Ergomed MV (IS-84 base)\u003cbr\u003e\t\nLX-F (based on IS-05)\u003cbr\u003e\t\nLS \/ LS- # \/ LT- #\t\u003cbr\u003e\nRMS2600A \/ 2700G\tYou need to prepare the side adapter separately.\u003cbr\u003e\nNew Orthopedo (with Recaro Vent)\u003cbr\u003e\t\nRCS\tYou need to prepare the side adapter separately.\u003cbr\u003e\nSR-2 late model \/ SR-3 \/ SR-4 \/ SR-5 \/ SR-VF \/ SR-IMPACT \/ SR-IMPACT Pro\u003cbr\u003e\t\nSP-A \/ SP-G \/ SP-G2 \/ SP-G3 \/ SP-GT \/ SP-GT2\tYou need to prepare the side adapter separately.\u003cbr\u003e\nAM19 TREND-J\u003cbr\u003e\nAM19 TREND-JJ\u003cbr\u003e\nAM19 TREND-JC\u003cbr\u003e\t\nAM19 STYLE-J\u003cbr\u003e\nAM19 STYLE-JJ\u003cbr\u003e\nAM19 STYLE-JC\u003cbr\u003e\t\nAM19 SPORT-J\u003cbr\u003e\nAM19 SPORT-JJ\u003cbr\u003e\nAM19 SPORT-JC\u003cbr\u003e\t\nAM19 TREND-JS\u003cbr\u003e\t\nAM19 STYLE-JS\u003cbr\u003e\t\nAM19 SPORT-JS\u003cbr\u003e\t\nAM19 TREND-D\u003cbr\u003e\nAM19 TREND-DC\u003cbr\u003e\t\nAM19 STYLE-D\u003cbr\u003e\nAM19 STYLE-DC\t\u003cbr\u003e\nAM19 SPORT-D \u003cbr\u003eAM19\u003cbr\u003e\t\nTS-G \/ RS-G \/ TS-W \/ RS-W\tYou need to prepare the side adapter separately.\u003cbr\u003e\nSP-X\u003cbr\u003e\t\nSR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e\t\nSportster \/ Cross Sportster\t\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCooper S | R56 S | 2007-2014 | TC | N18B16A | I4,JCW Cooper S | R56 JCW | 2010-2014 | TC | N18B16A | I4,JCW Cooper S | R56 JCW | 2010-2014 | TC | N18B16A | I4\u003c!--split--\u003e\u003c\/product\u003e\u003c\/product\u003e"}
Recaro Japan - Base Frame Seat Rail Standard - MINI Cooper JCW/S SJ
Specifications:
Manufacturer: Recaro Japan
Reference Number: 2014.063.1/ 2014.063.2
Position:
New structural frame. One position type.
Notes and Remarks:
(Note) It cannot be installed on seats other than those listed in the matching information below. sports frame. R55, R56, R57?side airbag canceller included. When installing RECARO on the passenger seat, separately sold parts are required. Please refer to the special notes below.
The genuine seat built-in side airbag function will no longer be available. Airbag warning light needs to be turned off. The seating position is approximately 5mm lower than the lowest position of the genuine seat (when using ST-JJ). Seat offset, approximately 10mm on the door side (Recaro is closer to the door). The amount of rearward sliding is reduced by approximately 25mm compared to the original. If you want to install a Recaro seat on the passenger seat, you will need to install the separately sold naviseat selector type 2-A product number 7215870
SP-# requires SP-G offset adapter set. The shoulder part interferes with the B pillar by approximately 5 to 10 mm. The shoulder part of SP-#N interferes with the B pillar by about 5 to 10 mm. Trend-J, JJ, JC, D, and DC have approximately 5-10mm interference between the backrest side and door armrest. For the RS/TS-# series, the handle offset can be adjusted in 5mm increments from 5mm to a maximum of 15mm using the RS/TS-G offset adapter set . (When installing, please consult your retailer to avoid interference with the console side (shift, etc.)) The RMS can be adjusted to the optimal position (front/rear height, left/right offset 0/5/10 mm) using the separately sold RMS side adapter. Please put it on. Also, if there is interference with the interior, it can be alleviated by adjustment. Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter and install it.
Seat Fitting:
This seat rail fits:
LX / LX- # / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
LX-F (based on IS-05)
LS / LS- # / LT- #
RMS2600A / 2700G You need to prepare the side adapter separately.
New Orthopedo (with Recaro Vent)
RCS You need to prepare the side adapter separately.
SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You need to prepare the side adapter separately.
AM19 TREND-J
AM19 TREND-JJ
AM19 TREND-JC
AM19 STYLE-J
AM19 STYLE-JJ
AM19 STYLE-JC
AM19 SPORT-J
AM19 SPORT-JJ
AM19 SPORT-JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D
AM19 TREND-DC
AM19 STYLE-D
AM19 STYLE-DC
AM19 SPORT-D
AM19
TS-G / RS-G / TS-W / RS-W You need to prepare the side adapter separately.
SP-X
SR-6 / SR-7 / SR-7F / SR-11
Sportster / Cross Sportster
Manufacturer: Recaro Japan
Reference Number: 2014.063.1/ 2014.063.2
Position:
New structural frame. One position type.
Notes and Remarks:
(Note) It cannot be installed on seats other than those listed in the matching information below. sports frame. R55, R56, R57?side airbag canceller included. When installing RECARO on the passenger seat, separately sold parts are required. Please refer to the special notes below.
The genuine seat built-in side airbag function will no longer be available. Airbag warning light needs to be turned off. The seating position is approximately 5mm lower than the lowest position of the genuine seat (when using ST-JJ). Seat offset, approximately 10mm on the door side (Recaro is closer to the door). The amount of rearward sliding is reduced by approximately 25mm compared to the original. If you want to install a Recaro seat on the passenger seat, you will need to install the separately sold naviseat selector type 2-A product number 7215870
SP-# requires SP-G offset adapter set
Seat Fitting:
This seat rail fits:
LX / LX- # / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
LX-F (based on IS-05)
LS / LS- # / LT- #
RMS2600A / 2700G You need to prepare the side adapter separately.
New Orthopedo (with Recaro Vent)
RCS You need to prepare the side adapter separately.
SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You need to prepare the side adapter separately.
AM19 TREND-J
AM19 TREND-JJ
AM19 TREND-JC
AM19 STYLE-J
AM19 STYLE-JJ
AM19 STYLE-JC
AM19 SPORT-J
AM19 SPORT-JJ
AM19 SPORT-JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D
AM19 TREND-DC
AM19 STYLE-D
AM19 STYLE-DC
AM19 SPORT-D
AM19
TS-G / RS-G / TS-W / RS-W You need to prepare the side adapter separately.
SP-X
SR-6 / SR-7 / SR-7F / SR-11
Sportster / Cross Sportster
Taxes:
Singapore and Malaysia: All import taxes are included in our pricing.
Rest of the World: Other countries may have to pay their local import tax depending on your country's regulations.
Singapore and Malaysia: All import taxes are included in our pricing.
Rest of the World: Other countries may have to pay their local import tax depending on your country's regulations.
Shipping:
This product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.
Every Monday our team keeps you in the loop by sending out an "estimated time of arrival" email.
This product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.
Every Monday our team keeps you in the loop by sending out an "estimated time of arrival" email.
This part fits:
Cooper S | R56 S | 2007-2014 | TC | N18B16A | I4,JCW Cooper S | R56 JCW | 2010-2014 | TC | N18B16A | I4,JCW Cooper S | R56 JCW | 2010-2014 | TC | N18B16A | I4
Cooper S | R56 S | 2007-2014 | TC | N18B16A | I4,JCW Cooper S | R56 JCW | 2010-2014 | TC | N18B16A | I4,JCW Cooper S | R56 JCW | 2010-2014 | TC | N18B16A | I4
Related Products
5zigen Pro Racer Headers - Toyota - 86 ZN6
$1,135.00 $1,078.25
5zigen SP Spec Tune Exhaust system - Nissan - GT-R R35
$2,293.00 $2,201.28