2018

{"id":7442480496822,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Land Cruiser Prado GDJ150W\/GDJ151W\/GRJ150W\/GRJ151W\/TRJ150\/TRJ150W (2009-2021)","handle":"recaro-japan-base-frame-seat-rail-standard-right-toyota-land-cruiser-prado-gdj150w-gdj151w-grj150w-grj151w-trj150-trj150w-2009-2021-2080-628-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator. Please use airbag canceller. Seat position: same as lowest position of OEM seat.(Middle position of 3 position baseframe with ST-JJ) The length of slider is 20mm shorter than OEM seat on rear side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.Attached a side airbag canceller. Precrash safty system car cannot be installed. Cold climate area specification and Optional equipment car is unconfirmed\u003cbr\u003e- SP-# needs SP-G offset adapter (PN 1600094J）.CS,CSE,CT,C-classicuses spacer therefore seat position will be higher.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Land Cruiser Prado - GDJ150W (2015-2021) 1GD-FTV\u003cbr\u003eToyota - Land Cruiser Prado - GDJ151W (2015-2021) 1GD-FTV\u003cbr\u003eToyota - Land Cruiser Prado - GRJ150W (2009-2015) 1GR-FE\u003cbr\u003eToyota - Land Cruiser Prado - GRJ151W (2009-2015) 1GR-FE\u003cbr\u003eToyota - Land Cruiser Prado - TRJ150 (2009-2016) 2TR-FE\u003cbr\u003eToyota - Land Cruiser Prado - TRJ150W (2009-2017) 2TR-FE\u003c!--split--\u003e","published_at":"2022-08-23T18:22:31+08:00","created_at":"2022-08-23T18:12:47+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","2019","2020","2021","26000x15y1z0","CTA180","land-cruiser-prado-gdj150w-2015-2021-tc-1gd-ftv-v6","land-cruiser-prado-gdj151w-2015-2021-tc-1gd-ftv-v6","land-cruiser-prado-grj150w-2009-2015-na-1gr-fe-v6","land-cruiser-prado-grj151w-2009-2015-na-1gr-fe-v6","land-cruiser-prado-trj150-2009-2017-na-2tr-fe-i4","land-cruiser-prado-trj150w-2009-2017-na-2tr-fe-i4","recaro-japan","right","seat-rails","toyota","ws15"],"price":24600,"price_min":24600,"price_max":24600,"available":true,"price_varies":false,"compare_at_price":24600,"compare_at_price_min":24600,"compare_at_price_max":24600,"compare_at_price_varies":false,"variants":[{"id":41726141890742,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2080.628.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Land Cruiser Prado GDJ150W\/GDJ151W\/GRJ150W\/GRJ151W\/TRJ150\/TRJ150W (2009-2021)","public_title":null,"options":["Default Title"],"price":24600,"weight":17000,"compare_at_price":24600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-land-cruiser-prado-gdj150wgdj151wgrj150wgrj151wtrj150trj150w-2009-2021-rzcrew.jpg?v=1710320082"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-land-cruiser-prado-gdj150wgdj151wgrj150wgrj151wtrj150trj150w-2009-2021-rzcrew.jpg?v=1710320082","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Land Cruiser Prado GDJ150W\/GDJ151W\/GRJ150W\/GRJ151W\/TRJ150\/TRJ150W (2009-2021) - 2080.628.2 - Rzcrewgarage","id":24895590400182,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-land-cruiser-prado-gdj150wgdj151wgrj150wgrj151wtrj150trj150w-2009-2021-rzcrew.jpg?v=1710320082"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-land-cruiser-prado-gdj150wgdj151wgrj150wgrj151wtrj150trj150w-2009-2021-rzcrew.jpg?v=1710320082","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator. Please use airbag canceller. Seat position: same as lowest position of OEM seat.(Middle position of 3 position baseframe with ST-JJ) The length of slider is 20mm shorter than OEM seat on rear side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.Attached a side airbag canceller. Precrash safty system car cannot be installed. Cold climate area specification and Optional equipment car is unconfirmed\u003cbr\u003e- SP-# needs SP-G offset adapter (PN 1600094J）.CS,CSE,CT,C-classicuses spacer therefore seat position will be higher.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Land Cruiser Prado - GDJ150W (2015-2021) 1GD-FTV\u003cbr\u003eToyota - Land Cruiser Prado - GDJ151W (2015-2021) 1GD-FTV\u003cbr\u003eToyota - Land Cruiser Prado - GRJ150W (2009-2015) 1GR-FE\u003cbr\u003eToyota - Land Cruiser Prado - GRJ151W (2009-2015) 1GR-FE\u003cbr\u003eToyota - Land Cruiser Prado - TRJ150 (2009-2016) 2TR-FE\u003cbr\u003eToyota - Land Cruiser Prado - TRJ150W (2009-2017) 2TR-FE\u003c!--split--\u003e"}

{"id":7442480398518,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Land Cruiser URJ202W\/UZJ200W (2007-2018)","handle":"recaro-japan-base-frame-seat-rail-standard-right-toyota-land-cruiser-urj202w-uzj200w-2007-2018-2080-627-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator. Please use airbag canceller. Seat position: height is same as OEM seat. (Middle position of 3 position baseframe with ST-JJ)The length of slider is 20mm shorter than OEM seat on front side. drivers side seat position sensor requires relocation.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.Attached a side airbag canceller. Pre-crash Safety System is not allowed to install.Cold climate area specification and Optional equipment car is unconfirmed\u003cbr\u003e- CS,CT,C-classic CSE= the sitting position will be higher because of spacers usage.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Land Cruiser - URJ202W (2009-2015) 1UR-FE\u003cbr\u003eToyota - Land Cruiser - URJ202W (2015-2018) 1UR-FE\u003cbr\u003eToyota - Land Cruiser - UZJ200W (2007-2009) 2UZ-FE\u003c!--split--\u003e","published_at":"2022-08-23T18:22:07+08:00","created_at":"2022-08-23T18:12:41+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","26000x15y1z0","CTA180","land-cruiser-urj202w-2009-2018-na-1ur-fe-v8","land-cruiser-uzj200w-2007-2018-na-2uz-fe-v8","recaro-japan","right","seat-rails","toyota","ws15"],"price":24600,"price_min":24600,"price_max":24600,"available":true,"price_varies":false,"compare_at_price":24600,"compare_at_price_min":24600,"compare_at_price_max":24600,"compare_at_price_varies":false,"variants":[{"id":41726141268150,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2080.627.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Land Cruiser URJ202W\/UZJ200W (2007-2018)","public_title":null,"options":["Default Title"],"price":24600,"weight":17000,"compare_at_price":24600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-land-cruiser-urj202wuzj200w-2007-2018-rzcrew.jpg?v=1710320082"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-land-cruiser-urj202wuzj200w-2007-2018-rzcrew.jpg?v=1710320082","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Land Cruiser URJ202W\/UZJ200W (2007-2018) - 2080.627.2 - Rzcrewgarage","id":24895589908662,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-land-cruiser-urj202wuzj200w-2007-2018-rzcrew.jpg?v=1710320082"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-land-cruiser-urj202wuzj200w-2007-2018-rzcrew.jpg?v=1710320082","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator. Please use airbag canceller. Seat position: height is same as OEM seat. (Middle position of 3 position baseframe with ST-JJ)The length of slider is 20mm shorter than OEM seat on front side. drivers side seat position sensor requires relocation.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.Attached a side airbag canceller. Pre-crash Safety System is not allowed to install.Cold climate area specification and Optional equipment car is unconfirmed\u003cbr\u003e- CS,CT,C-classic CSE= the sitting position will be higher because of spacers usage.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Land Cruiser - URJ202W (2009-2015) 1UR-FE\u003cbr\u003eToyota - Land Cruiser - URJ202W (2015-2018) 1UR-FE\u003cbr\u003eToyota - Land Cruiser - UZJ200W (2007-2009) 2UZ-FE\u003c!--split--\u003e"}

{"id":7442480988342,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Mark X Zio ANA10\/ANA15\/GGA10 (2007-2018)","handle":"recaro-japan-base-frame-seat-rail-standard-right-toyota-mark-x-zio-ana10-ana15-gga10-2007-2018-2080-842-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator. Please use airbag canceller.Seat position: height is same as lowermost OEM seat. (Middle position of 3 position of rail with ST-JJ)The length of slider is 20mm shorter than OEM seat on front side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.Attached a side airbag canceller.\u003cbr\u003e- CS,CT,C-classic CSE= the sitting position will be higher because of spacers usage.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Mark X Zio - ANA10 (2007-2018) 2AZ-FE\u003cbr\u003eToyota - Mark X Zio - ANA15 (2007-2018) 2AZ-FE\u003cbr\u003eToyota - Mark X Zio - GGA10 (2007-2018) 22GR-FE\u003c!--split--\u003e","published_at":"2022-08-23T18:22:11+08:00","created_at":"2022-08-23T18:13:23+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","26000x15y1z0","CTA180","mark-x-zio-ana10-2007-2018-na-2az-fe-i4","mark-x-zio-ana15-2007-2018-na-2az-fe-i4","mark-x-zio-gga10-2007-2018-na-2gr-fe-v6","recaro-japan","right","seat-rails","toyota","ws15"],"price":24600,"price_min":24600,"price_max":24600,"available":true,"price_varies":false,"compare_at_price":24600,"compare_at_price_min":24600,"compare_at_price_max":24600,"compare_at_price_varies":false,"variants":[{"id":41726142480566,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2080.842.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Mark X Zio ANA10\/ANA15\/GGA10 (2007-2018)","public_title":null,"options":["Default Title"],"price":24600,"weight":17000,"compare_at_price":24600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-mark-x-zio-ana10ana15gga10-2007-2018-rzcrew.jpg?v=1710320071"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-mark-x-zio-ana10ana15gga10-2007-2018-rzcrew.jpg?v=1710320071","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Mark X Zio ANA10\/ANA15\/GGA10 (2007-2018) - 2080.842.2 - Rzcrewgarage","id":24895593185462,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-mark-x-zio-ana10ana15gga10-2007-2018-rzcrew.jpg?v=1710320071"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-mark-x-zio-ana10ana15gga10-2007-2018-rzcrew.jpg?v=1710320071","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator. Please use airbag canceller.Seat position: height is same as lowermost OEM seat. (Middle position of 3 position of rail with ST-JJ)The length of slider is 20mm shorter than OEM seat on front side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.Attached a side airbag canceller.\u003cbr\u003e- CS,CT,C-classic CSE= the sitting position will be higher because of spacers usage.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Mark X Zio - ANA10 (2007-2018) 2AZ-FE\u003cbr\u003eToyota - Mark X Zio - ANA15 (2007-2018) 2AZ-FE\u003cbr\u003eToyota - Mark X Zio - GGA10 (2007-2018) 22GR-FE\u003c!--split--\u003e"}

{"id":7442479186102,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Prius PHV ZVW35 (2012-2018)","handle":"recaro-japan-base-frame-seat-rail-standard-right-toyota-prius-phv-zvw35-2012-2018-2080-527-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator. (Middle position of 3 position baseframe with ST-JJ.Seat position:23mm higher than lowest position of OEM seat.(Middle position of 3 position baseframe with ST-JJ)10mm to door from OEM seat.The length of slider is 40mm shorter than OEM seat on front side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.Attached a side airbag canceller. Including PHV car. Accessories and the navigation unit are unconfirmed.\u003cbr\u003e- CS,CT,C-classic CSE= the sitting position will be higher because of spacers usage.RS\/TS-# series need RS\/TS-G offset adapter(PN 1700001J）.1700001J is adjustable offset (5mm\/10mm\/15mm).RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Prius PHV - ZVW35 (2012-2018) 2ZR-FXE\u003c!--split--\u003e","published_at":"2022-08-23T18:22:11+08:00","created_at":"2022-08-23T18:11:36+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2012","2013","2014","2015","2016","2017","2018","26000x15y1z0","CTA180","prius-phv-zvw35-2012-2018-h-2zr-fxe-i4","recaro-japan","right","seat-rails","toyota","ws15"],"price":24600,"price_min":24600,"price_max":24600,"available":true,"price_varies":false,"compare_at_price":24600,"compare_at_price_min":24600,"compare_at_price_max":24600,"compare_at_price_varies":false,"variants":[{"id":41726139367606,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2080.527.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Prius PHV ZVW35 (2012-2018)","public_title":null,"options":["Default Title"],"price":24600,"weight":17000,"compare_at_price":24600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-prius-phv-zvw35-2012-2018-rzcrew.jpg?v=1710320096"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-prius-phv-zvw35-2012-2018-rzcrew.jpg?v=1710320096","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Prius PHV ZVW35 (2012-2018) - 2080.527.2 - Rzcrewgarage","id":24895583715510,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-prius-phv-zvw35-2012-2018-rzcrew.jpg?v=1710320096"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-prius-phv-zvw35-2012-2018-rzcrew.jpg?v=1710320096","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator. (Middle position of 3 position baseframe with ST-JJ.Seat position:23mm higher than lowest position of OEM seat.(Middle position of 3 position baseframe with ST-JJ)10mm to door from OEM seat.The length of slider is 40mm shorter than OEM seat on front side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.Attached a side airbag canceller. Including PHV car. Accessories and the navigation unit are unconfirmed.\u003cbr\u003e- CS,CT,C-classic CSE= the sitting position will be higher because of spacers usage.RS\/TS-# series need RS\/TS-G offset adapter(PN 1700001J）.1700001J is adjustable offset (5mm\/10mm\/15mm).RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Prius PHV - ZVW35 (2012-2018) 2ZR-FXE\u003c!--split--\u003e"}

{"id":7442474533046,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Prius ZVW50 (2015-2018)","handle":"recaro-japan-base-frame-seat-rail-standard-right-toyota-prius-zvw50-2015-2018-2080-011-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator. Please use airbag canceller. Seating position: 27mm higher than the lowest height of OEM seat.(A case of New LX-F using middle position of 3 position baseframe. The height can be adjustable. 40mm higher than OEM seat or 14mm higher than OEM seat.) Seat offset is 0(handle center).The length of slider is 40mm shorter than OEM slider. Function of seat belt reminder loses on passenger seat. (Warning lights of the seat belt will not light.) Function of seat belt reminder loses on passenger seat. (Warning lights of the seat belt will not light.)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.Attached a side airbag canceller. Optional equipment car is unconfirmed.\u003cbr\u003e- There is interference between seat cushion side and center console at the front most position. AM19系 SPORT,IS-05系 SR-6,7,11(except 7F）=3-5mmRCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Prius - ZVW50 (2015-2018) 2ZR-FXE\u003c!--split--\u003e","published_at":"2022-08-23T18:22:16+08:00","created_at":"2022-08-23T18:06:20+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2015","2016","2017","2018","26000x15y1z0","CTA180","prius-zvw50-2015-2018-h-2zr-fxe-i4","recaro-japan","right","seat-rails","toyota","ws15"],"price":24600,"price_min":24600,"price_max":24600,"available":true,"price_varies":false,"compare_at_price":24600,"compare_at_price_min":24600,"compare_at_price_max":24600,"compare_at_price_varies":false,"variants":[{"id":41726129504438,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2080.011.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Prius ZVW50 (2015-2018)","public_title":null,"options":["Default Title"],"price":24600,"weight":17000,"compare_at_price":24600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-prius-zvw50-2015-2018-rzcrew.jpg?v=1710320155"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-prius-zvw50-2015-2018-rzcrew.jpg?v=1710320155","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Prius ZVW50 (2015-2018) - 2080.011.2 - Rzcrewgarage","id":24895554224310,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-prius-zvw50-2015-2018-rzcrew.jpg?v=1710320155"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-prius-zvw50-2015-2018-rzcrew.jpg?v=1710320155","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator. Please use airbag canceller. Seating position: 27mm higher than the lowest height of OEM seat.(A case of New LX-F using middle position of 3 position baseframe. The height can be adjustable. 40mm higher than OEM seat or 14mm higher than OEM seat.) Seat offset is 0(handle center).The length of slider is 40mm shorter than OEM slider. Function of seat belt reminder loses on passenger seat. (Warning lights of the seat belt will not light.) Function of seat belt reminder loses on passenger seat. (Warning lights of the seat belt will not light.)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.Attached a side airbag canceller. Optional equipment car is unconfirmed.\u003cbr\u003e- There is interference between seat cushion side and center console at the front most position. AM19系 SPORT,IS-05系 SR-6,7,11(except 7F）=3-5mmRCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Prius - ZVW50 (2015-2018) 2ZR-FXE\u003c!--split--\u003e"}

{"id":7442475516086,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Prius ZVW50\/ZVW51\/ZVW55 (2015-2018)","handle":"recaro-japan-base-frame-seat-rail-standard-right-toyota-prius-zvw50-zvw51-zvw55-2015-2018-2080-024-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cdiv class=\"product-specs\"\u003eBrand: Recaro\u003cbr\u003eProduct: Base Frame Seat Rail Sports Frame Type Right - ZYX10 NGX50 NGX10 AXVH70 Corolla Sport E21# NRE210 ZWE211 ZRE212 ZWE214 ZVW5# Yaris GXPA16 KSP210 MXPA1# MXPH1#\u003cbr\u003ePart Num: 2080.024.2\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eMade to Order: Leadtime 3 ~ 4 Weeks\u003cbr\u003eType: Sports frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator. Please use airbag canceller. Seating position: Height is 17mm higer than OEM lowest position.(A case of New LX-F using adapter frame. If you remove adapter frame, height is 21mm lower than OEM lowest seat.) Handle offset is 13mm to door side. The length of slider is 40 mm shorter than OEM slider. Function of seat belt reminder loses on passenger seat.(Warning lights of the seat belt will not light.)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. Sports frame type.（with the adapter frame. ) Attached a side airbag canceller. Optional equipment car is unconfirmed.\u003cbr\u003e- On passenger seat (Japanese cars left side), there is interference between seat side cushion and center console at most front position of slider. SPORT,STYLE,TREND JJ,JC,DC=3-10mm. SR-6,7,11=5mm.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003c\/div\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Prius - ZVW50 (2015-2018) 2ZR-FXE\u003cbr\u003eToyota - Prius - ZVW51 (2015-2018) 2ZR-FXE\u003cbr\u003eToyota - Prius - ZVW55 (2015-2018) 2ZR-FXE\u003c!--split--\u003e","published_at":"2022-08-23T18:22:14+08:00","created_at":"2022-08-23T18:07:26+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2015","2016","2017","2018","26000x15y1z0","CTA180","prius-zvw50-2015-2018-h-2zr-fxe-i4","prius-zvw51-2015-2018-h-2zr-fxe-i4","prius-zvw55-2015-2018-h-2zr-fxe-i4","recaro-japan","right","seat-rails","toyota","ws15"],"price":24600,"price_min":24600,"price_max":24600,"available":true,"price_varies":false,"compare_at_price":24600,"compare_at_price_min":24600,"compare_at_price_max":24600,"compare_at_price_varies":false,"variants":[{"id":41726130815158,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2080.024.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Prius ZVW50\/ZVW51\/ZVW55 (2015-2018)","public_title":null,"options":["Default Title"],"price":24600,"weight":17000,"compare_at_price":24600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-prius-zvw50zvw51zvw55-2015-2018-rzcrew.jpg?v=1710320140"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-prius-zvw50zvw51zvw55-2015-2018-rzcrew.jpg?v=1710320140","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Prius ZVW50\/ZVW51\/ZVW55 (2015-2018) - 2080.024.2 - Rzcrewgarage","id":24895560089782,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-prius-zvw50zvw51zvw55-2015-2018-rzcrew.jpg?v=1710320140"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-prius-zvw50zvw51zvw55-2015-2018-rzcrew.jpg?v=1710320140","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cdiv class=\"product-specs\"\u003eBrand: Recaro\u003cbr\u003eProduct: Base Frame Seat Rail Sports Frame Type Right - ZYX10 NGX50 NGX10 AXVH70 Corolla Sport E21# NRE210 ZWE211 ZRE212 ZWE214 ZVW5# Yaris GXPA16 KSP210 MXPA1# MXPH1#\u003cbr\u003ePart Num: 2080.024.2\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eMade to Order: Leadtime 3 ~ 4 Weeks\u003cbr\u003eType: Sports frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator. Please use airbag canceller. Seating position: Height is 17mm higer than OEM lowest position.(A case of New LX-F using adapter frame. If you remove adapter frame, height is 21mm lower than OEM lowest seat.) Handle offset is 13mm to door side. The length of slider is 40 mm shorter than OEM slider. Function of seat belt reminder loses on passenger seat.(Warning lights of the seat belt will not light.)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. Sports frame type.（with the adapter frame. ) Attached a side airbag canceller. Optional equipment car is unconfirmed.\u003cbr\u003e- On passenger seat (Japanese cars left side), there is interference between seat side cushion and center console at most front position of slider. SPORT,STYLE,TREND JJ,JC,DC=3-10mm. SR-6,7,11=5mm.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003c\/div\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Prius - ZVW50 (2015-2018) 2ZR-FXE\u003cbr\u003eToyota - Prius - ZVW51 (2015-2018) 2ZR-FXE\u003cbr\u003eToyota - Prius - ZVW55 (2015-2018) 2ZR-FXE\u003c!--split--\u003e"}

{"id":7442479153334,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Prius α ZVW41W (2011-2018)","handle":"recaro-japan-base-frame-seat-rail-standard-right-toyota-prius-α-zvw41w-2011-2018-2080-527-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator. (Middle position of 3 position baseframe with ST-JJ.Seat position:23mm higher than lowest position of OEM seat.(Middle position of 3 position baseframe with ST-JJ)10mm to door from OEM seat.The length of slider is 40mm shorter than OEM seat on front side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.Attached a side airbag canceller. Including PHV car. Accessories and the navigation unit are unconfirmed.\u003cbr\u003e- CS,CT,C-classic CSE= the sitting position will be higher because of spacers usage.RS\/TS-# series need RS\/TS-G offset adapter(PN 1700001J）.1700001J is adjustable offset (5mm\/10mm\/15mm).RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Prius α - ZVW41W (2011-2018) 2ZR-FXE\u003c!--split--\u003e","published_at":"2022-08-23T18:22:15+08:00","created_at":"2022-08-23T18:11:34+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2011","2012","2013","2014","2015","2016","2017","2018","26000x15y1z0","CTA180","prius-î±-zvw41w-2011-2018-h-2zr-fxe-i4","recaro-japan","right","seat-rails","toyota","ws15"],"price":24600,"price_min":24600,"price_max":24600,"available":true,"price_varies":false,"compare_at_price":24600,"compare_at_price_min":24600,"compare_at_price_max":24600,"compare_at_price_varies":false,"variants":[{"id":41726139203766,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2080.527.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Prius α ZVW41W (2011-2018)","public_title":null,"options":["Default Title"],"price":24600,"weight":17000,"compare_at_price":24600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-prius-a-zvw41w-2011-2018-rzcrew.jpg?v=1710320096"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-prius-a-zvw41w-2011-2018-rzcrew.jpg?v=1710320096","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Prius α ZVW41W (2011-2018) - 2080.527.2 - Rzcrewgarage","id":24895583387830,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-prius-a-zvw41w-2011-2018-rzcrew.jpg?v=1710320096"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-prius-a-zvw41w-2011-2018-rzcrew.jpg?v=1710320096","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator. (Middle position of 3 position baseframe with ST-JJ.Seat position:23mm higher than lowest position of OEM seat.(Middle position of 3 position baseframe with ST-JJ)10mm to door from OEM seat.The length of slider is 40mm shorter than OEM seat on front side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.Attached a side airbag canceller. Including PHV car. Accessories and the navigation unit are unconfirmed.\u003cbr\u003e- CS,CT,C-classic CSE= the sitting position will be higher because of spacers usage.RS\/TS-# series need RS\/TS-G offset adapter(PN 1700001J）.1700001J is adjustable offset (5mm\/10mm\/15mm).RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Prius α - ZVW41W (2011-2018) 2ZR-FXE\u003c!--split--\u003e"}

{"id":7442480693430,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Ractis NCP100\/NCP105\/SCP100 (2005-2018)","handle":"recaro-japan-base-frame-seat-rail-standard-right-toyota-ractis-ncp100-ncp105-scp100-2005-2018-2080-743-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(Middle position of 3 position baseframe with ST-JJ) The length of slider is 20mm shorter than OEM seat on rear side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. For right side seat only..(driver side) For non-side airbag car only. 4WD(Left sade seat is unconfirmed.)Cold climate area specificationand Optional equipment car is unconfirmed\u003cbr\u003e- Trend-J,JJ,JC,D,DCfor back rest side and Doorarm resta couple mm. interfere.CS,CSEuses spacer therefore seat position will be higher.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Ractis - NCP100 (2005-2018) 1NZ-FE\u003cbr\u003eToyota - Ractis - NCP105 (2005-2018) 1NZ-FE\u003cbr\u003eToyota - Ractis - SCP100 (2005-2018) 2SZ-FE\u003c!--split--\u003e","published_at":"2022-08-23T18:22:15+08:00","created_at":"2022-08-23T18:13:09+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","26000x15y1z0","CTA180","ractis-ncp100-2005-2018-na-1nz-fe-i4","ractis-ncp105-2005-2018-na-1nz-fe-i4","ractis-scp100-2005-2018-na-2sz-fe-i4","recaro-japan","right","seat-rails","toyota","ws15"],"price":24600,"price_min":24600,"price_max":24600,"available":true,"price_varies":false,"compare_at_price":24600,"compare_at_price_min":24600,"compare_at_price_max":24600,"compare_at_price_varies":false,"variants":[{"id":41726142087350,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2080.743.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Ractis NCP100\/NCP105\/SCP100 (2005-2018)","public_title":null,"options":["Default Title"],"price":24600,"weight":17000,"compare_at_price":24600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-ractis-ncp100ncp105scp100-2005-2018-rzcrew.jpg?v=1710320073"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-ractis-ncp100ncp105scp100-2005-2018-rzcrew.jpg?v=1710320073","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Ractis NCP100\/NCP105\/SCP100 (2005-2018) - 2080.743.2 - Rzcrewgarage","id":24895591186614,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-ractis-ncp100ncp105scp100-2005-2018-rzcrew.jpg?v=1710320073"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-ractis-ncp100ncp105scp100-2005-2018-rzcrew.jpg?v=1710320073","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(Middle position of 3 position baseframe with ST-JJ) The length of slider is 20mm shorter than OEM seat on rear side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. For right side seat only..(driver side) For non-side airbag car only. 4WD(Left sade seat is unconfirmed.)Cold climate area specificationand Optional equipment car is unconfirmed\u003cbr\u003e- Trend-J,JJ,JC,D,DCfor back rest side and Doorarm resta couple mm. interfere.CS,CSEuses spacer therefore seat position will be higher.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Ractis - NCP100 (2005-2018) 1NZ-FE\u003cbr\u003eToyota - Ractis - NCP105 (2005-2018) 1NZ-FE\u003cbr\u003eToyota - Ractis - SCP100 (2005-2018) 2SZ-FE\u003c!--split--\u003e"}

{"id":7442477187254,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota RAV4 ACA31W\/ACA36W (2005-2018)","handle":"recaro-japan-base-frame-seat-rail-standard-right-toyota-rav4-aca31w-aca36w-2005-2018-2080-253-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(Middle position of 3 position baseframe with ST-JJ) The length of slider is 20mm shorter than OEM seat on front side. drivers side seat position sensor requires relocation. .\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.For non-side airbag car only.Cold climate area specificationand Optional equipment car is unconfirmed\u003cbr\u003e- CS,CT,C-classic CSE= the sitting position will be higher because of spacers usage.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - RAV4 - ACA31W (2006-2018) 2AZ-FE\u003cbr\u003eToyota - RAV4 - ACA36W (2005-2018) 2AZ-FE\u003c!--split--\u003e","published_at":"2022-08-23T18:22:16+08:00","created_at":"2022-08-23T18:09:15+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","26000x15y1z0","CTA180","rav4-aca31w-2006-2018-na-2az-fe-i4","rav4-aca36w-2005-2018-na-2az-fe-i4","recaro-japan","right","seat-rails","toyota","ws15"],"price":24600,"price_min":24600,"price_max":24600,"available":true,"price_varies":false,"compare_at_price":24600,"compare_at_price_min":24600,"compare_at_price_max":24600,"compare_at_price_varies":false,"variants":[{"id":41726133928118,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2080.253.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota RAV4 ACA31W\/ACA36W (2005-2018)","public_title":null,"options":["Default Title"],"price":24600,"weight":17000,"compare_at_price":24600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-rav4-aca31waca36w-2005-2018-rzcrew.jpg?v=1710320120"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-rav4-aca31waca36w-2005-2018-rzcrew.jpg?v=1710320120","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota RAV4 ACA31W\/ACA36W (2005-2018) - 2080.253.2 - Rzcrewgarage","id":24895572017334,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-rav4-aca31waca36w-2005-2018-rzcrew.jpg?v=1710320120"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-rav4-aca31waca36w-2005-2018-rzcrew.jpg?v=1710320120","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(Middle position of 3 position baseframe with ST-JJ) The length of slider is 20mm shorter than OEM seat on front side. drivers side seat position sensor requires relocation. .\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.For non-side airbag car only.Cold climate area specificationand Optional equipment car is unconfirmed\u003cbr\u003e- CS,CT,C-classic CSE= the sitting position will be higher because of spacers usage.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - RAV4 - ACA31W (2006-2018) 2AZ-FE\u003cbr\u003eToyota - RAV4 - ACA36W (2005-2018) 2AZ-FE\u003c!--split--\u003e"}

{"id":8138639769782,"title":"Recaro Japan - RCS dedicated frame Seat Rail - Mazda - MX-5 Miata Roadster ND5RC","handle":"recaro-japan-rcs-dedicated-frame-seat-rail-mazda-mx-5-miata-roadster-nd5rc","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003eReference Number: 2082.011.1\/ 2082.011.2\u003cbr\u003e\u003cbr\u003ePosition: \u003cbr\u003eThis product cannot be installed on any seats other than those listed in the matching information below. Ultra low position frame. RCS dedicated frame base. Install using the dedicated side adapter included with the frame. Side airbag canceller included. New structure frame. One-position type.\u003cbr\u003eNotes and Remarks:\u003cbr\u003eThe side airbag function built into the factory seat will be lost. Vehicles equipped with side airbags will need to have the airbag warning light turned off. When a Recaro seat is installed in the passenger seat, the occupant detection sensor will no longer function and the seat belt warning light will no longer be on. The seating position can be adjusted 10mm to a maximum of 54mm lower than the factory seat by adjusting the installation position of the included side adapter. The steering wheel offset is approximately 3mm toward the door from the center of the steering wheel. Due to the limitations of the interior space and the roll bar on the vehicle side, interference with the interior may occur depending on the combination of the installation position of the side adapter and the seating position.\nNotes\/Interference Information\tThe seat cushion side and center console will interfere with each other from about 20mm from the front end of the slide, preventing the seat from sliding. Depending on the adjustment position of the side adapter, the seat and interior will interfere with each other up to 30mm from the rear end of the slide, preventing the seat from sliding.\u003cbr\u003e\u003cbr\u003ercs Only\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e Seat Fitting:\u003cbr\u003e \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMX-5 Miata Roadster | ND5RC | 2015-2018 | NA | P5-VP RS | I4\u003c!--split--\u003e","published_at":"2025-01-15T10:50:56+08:00","created_at":"2025-01-15T10:48:23+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2015","2016","2017","2018","30000x15y1z0","CTA180","JP1","mazda","mx-5-miata-roadster-nd5rc-2015-2018-na-p5-vp-rs-i4","ND5RC","recaro-japan","seat-rails","ws14"],"price":27264,"price_min":27264,"price_max":27264,"available":true,"price_varies":false,"compare_at_price":28400,"compare_at_price_min":28400,"compare_at_price_max":28400,"compare_at_price_varies":false,"variants":[{"id":43726675116214,"title":"Left","option1":"Left","option2":null,"option3":null,"sku":"2082.011.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - RCS dedicated frame Seat Rail - Mazda - MX-5 Miata Roadster ND5RC - Left","public_title":"Left","options":["Left"],"price":27264,"weight":17000,"compare_at_price":28400,"inventory_quantity":49,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43726675148982,"title":"Right","option1":"Right","option2":null,"option3":null,"sku":"2082.011.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - RCS dedicated frame Seat Rail - Mazda - MX-5 Miata Roadster ND5RC - Right","public_title":"Right","options":["Right"],"price":27264,"weight":17000,"compare_at_price":28400,"inventory_quantity":49,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/Recaro_seat_rail_66178190-dca6-4a62-a903-033e2ecd970d.jpg?v=1736909303","\/\/rzcrewgarage.com\/cdn\/shop\/files\/Recaro_seat_rail_40569646-61b3-4ff3-8094-b7f62b431434.jpg?v=1736909303"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Recaro_seat_rail_66178190-dca6-4a62-a903-033e2ecd970d.jpg?v=1736909303","options":["Side"],"media":[{"alt":"Recaro Japan - RCS dedicated frame Seat Rail - Mazda - MX-5 Miata Roadster ND5RC","id":28968544698550,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Recaro_seat_rail_66178190-dca6-4a62-a903-033e2ecd970d.jpg?v=1736909303"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Recaro_seat_rail_66178190-dca6-4a62-a903-033e2ecd970d.jpg?v=1736909303","width":640},{"alt":null,"id":28968544731318,"position":2,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Recaro_seat_rail_40569646-61b3-4ff3-8094-b7f62b431434.jpg?v=1736909303"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Recaro_seat_rail_40569646-61b3-4ff3-8094-b7f62b431434.jpg?v=1736909303","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003eReference Number: 2082.011.1\/ 2082.011.2\u003cbr\u003e\u003cbr\u003ePosition: \u003cbr\u003eThis product cannot be installed on any seats other than those listed in the matching information below. Ultra low position frame. RCS dedicated frame base. Install using the dedicated side adapter included with the frame. Side airbag canceller included. New structure frame. One-position type.\u003cbr\u003eNotes and Remarks:\u003cbr\u003eThe side airbag function built into the factory seat will be lost. Vehicles equipped with side airbags will need to have the airbag warning light turned off. When a Recaro seat is installed in the passenger seat, the occupant detection sensor will no longer function and the seat belt warning light will no longer be on. The seating position can be adjusted 10mm to a maximum of 54mm lower than the factory seat by adjusting the installation position of the included side adapter. The steering wheel offset is approximately 3mm toward the door from the center of the steering wheel. Due to the limitations of the interior space and the roll bar on the vehicle side, interference with the interior may occur depending on the combination of the installation position of the side adapter and the seating position.\nNotes\/Interference Information\tThe seat cushion side and center console will interfere with each other from about 20mm from the front end of the slide, preventing the seat from sliding. Depending on the adjustment position of the side adapter, the seat and interior will interfere with each other up to 30mm from the rear end of the slide, preventing the seat from sliding.\u003cbr\u003e\u003cbr\u003ercs Only\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e Seat Fitting:\u003cbr\u003e \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMX-5 Miata Roadster | ND5RC | 2015-2018 | NA | P5-VP RS | I4\u003c!--split--\u003e"}

{"id":8093105455286,"title":"Recaro Japan - RMS exclusive frame - Nissan GT-R R35","handle":"recaro-japan-rms-exclusive-frame-nissan-gt-r-r35","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003eReference Number: 2081.007.2\/ 2081.008.1\u003cbr\u003e\u003cbr\u003ePosition: \u003cbr\u003e(Note) This product cannot be installed on any seats other than those listed in the matching information below. Ultra low position frame. RMS exclusive frame, driver's seat frame (right seat). Install using the exclusive side adapter included with the base frame. Side airbag canceller included.\u003cbr\u003eNotes and Remarks:\u003cbr\u003eNew structure frame. One-position type.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe side airbag function built into the stock seat will be lost. The airbag warning light must be turned off. The seating position of the RMS can be lowered by approximately 14mm to a maximum of 55mm by adjusting the hole position of the dedicated side adapter. The steering wheel offset is center.\u003cbr\u003e\u003cbr\u003e Seat Fitting:\u003cbr\u003e RMS2600A \/ 2700G\tYou need to prepare the side adapter separately.\u003cbr\u003e\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eGT-R | R35 Zenki | 2007-2010 | TT | VR38DETT | V6,GT-R | R35 Chuki | 2010-2016 | TT | VR38DETT | V6,GT-R | R35 Kouki | 2016-2018 | TT | VR38DETT | V6\u003c!--split--\u003e","published_at":"2024-10-16T09:46:25+08:00","created_at":"2024-10-16T09:45:07+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","30000x15y1z0","CTA180","gt-r-r35-chuki-2010-2016-tt-vr38dett-v6","gt-r-r35-kouki-2016-2018-tt-vr38dett-v6","gt-r-r35-zenki-2007-2010-tt-vr38dett-v6","jp1","nissan","R35","recaro-japan","seat-rails","ws14"],"price":27264,"price_min":27264,"price_max":27264,"available":true,"price_varies":false,"compare_at_price":28400,"compare_at_price_min":28400,"compare_at_price_max":28400,"compare_at_price_varies":false,"variants":[{"id":43542830579894,"title":"Right","option1":"Right","option2":null,"option3":null,"sku":"2081.007.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - RMS exclusive frame - Nissan GT-R R35 - Right","public_title":"Right","options":["Right"],"price":27264,"weight":17000,"compare_at_price":28400,"inventory_quantity":49,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43542830612662,"title":"Left","option1":"Left","option2":null,"option3":null,"sku":"2081.008.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - RMS exclusive frame - Nissan GT-R R35 - Left","public_title":"Left","options":["Left"],"price":27264,"weight":17000,"compare_at_price":28400,"inventory_quantity":49,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/Recaro_seat_rail_f3dfde26-2e43-4a73-b1c4-702226a2bdff.jpg?v=1729043107"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Recaro_seat_rail_f3dfde26-2e43-4a73-b1c4-702226a2bdff.jpg?v=1729043107","options":["Side"],"media":[{"alt":"Recaro Japan - RMS exclusive frame - Nissan GT-R R35","id":28652031377590,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Recaro_seat_rail_f3dfde26-2e43-4a73-b1c4-702226a2bdff.jpg?v=1729043107"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Recaro_seat_rail_f3dfde26-2e43-4a73-b1c4-702226a2bdff.jpg?v=1729043107","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003eReference Number: 2081.007.2\/ 2081.008.1\u003cbr\u003e\u003cbr\u003ePosition: \u003cbr\u003e(Note) This product cannot be installed on any seats other than those listed in the matching information below. Ultra low position frame. RMS exclusive frame, driver's seat frame (right seat). Install using the exclusive side adapter included with the base frame. Side airbag canceller included.\u003cbr\u003eNotes and Remarks:\u003cbr\u003eNew structure frame. One-position type.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe side airbag function built into the stock seat will be lost. The airbag warning light must be turned off. The seating position of the RMS can be lowered by approximately 14mm to a maximum of 55mm by adjusting the hole position of the dedicated side adapter. The steering wheel offset is center.\u003cbr\u003e\u003cbr\u003e Seat Fitting:\u003cbr\u003e RMS2600A \/ 2700G\tYou need to prepare the side adapter separately.\u003cbr\u003e\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eGT-R | R35 Zenki | 2007-2010 | TT | VR38DETT | V6,GT-R | R35 Chuki | 2010-2016 | TT | VR38DETT | V6,GT-R | R35 Kouki | 2016-2018 | TT | VR38DETT | V6\u003c!--split--\u003e"}

{"id":7217142464694,"title":"Rize Japan - Titanium hood bar - Toyota - 86 ZN6","handle":"rize-japan-titanium-hood-bar-toyota-86-zn6","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rize Japan\u003cbr\u003eReference Number: RZJPN-4\u003cbr\u003eType: titanium hood bar\u003cbr\u003eMaterial Options: \u003cbr\u003eApproximative Packaging Size: 10x10x10( volumetric Weight: 0.2) \u003cbr\u003e\u003cbr\u003ePerfectly Hand Crafted Titanium Hood Bar from Japan.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e86 | ZN6 SPEC A | 2012-2013 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC B | 2013-2014 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC C | 2014-2015 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC D | 2015-2016 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC E | 2016-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e","published_at":"2022-11-17T17:51:22+08:00","created_at":"2022-01-07T16:38:29+08:00","vendor":"Rize Japan","type":"Aero","tags":["2012","2013","2014","2015","2016","2017","2018","34430x3y1.2z2000","86-zn6-spec-b-2013-2014-na-4u-gse-h4","86-zn6-spec-c-2014-2015-na-4u-gse-h4","86-zn6-spec-d-2015-2016-na-4u-gse-h4","86-zn6-spec-e-2016-2018-na-4u-gse-h4","aero","bonnet","CTB49","JP1","rize-japan","toyota","ws15","ZN6"],"price":40500,"price_min":40500,"price_max":40500,"available":true,"price_varies":false,"compare_at_price":40500,"compare_at_price_min":40500,"compare_at_price_max":40500,"compare_at_price_varies":false,"variants":[{"id":41063915454646,"title":"Black","option1":"Black","option2":null,"option3":null,"sku":"RZJPN-4","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rize Japan - Titanium hood bar - Toyota - 86 ZN6 - Black","public_title":"Black","options":["Black"],"price":40500,"weight":1200,"compare_at_price":40500,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/rize-japan-titanium-hood-bar-toyota-86-zn6-rzcrew.jpg?v=1710321306"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rize-japan-titanium-hood-bar-toyota-86-zn6-rzcrew.jpg?v=1710321306","options":["Colour"],"media":[{"alt":"Rize Japan - Titanium hood bar - Toyota - 86 ZN6 - RZJPN-4 - Rzcrew Garage","id":23334693601462,"position":1,"preview_image":{"aspect_ratio":1.5,"height":1280,"width":1920,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rize-japan-titanium-hood-bar-toyota-86-zn6-rzcrew.jpg?v=1710321306"},"aspect_ratio":1.5,"height":1280,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rize-japan-titanium-hood-bar-toyota-86-zn6-rzcrew.jpg?v=1710321306","width":1920}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rize Japan\u003cbr\u003eReference Number: RZJPN-4\u003cbr\u003eType: titanium hood bar\u003cbr\u003eMaterial Options: \u003cbr\u003eApproximative Packaging Size: 10x10x10( volumetric Weight: 0.2) \u003cbr\u003e\u003cbr\u003ePerfectly Hand Crafted Titanium Hood Bar from Japan.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e86 | ZN6 SPEC A | 2012-2013 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC B | 2013-2014 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC C | 2014-2015 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC D | 2015-2016 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC E | 2016-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e"}

{"id":8316314353846,"title":"RK Design - FRP Canard - Mazda - MX-5 Miata Roadster ND","handle":"rk-design-frp-canard-mazda-mx-5-miata-roadster-nd","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RK Design\u003cbr\u003eReference Number: ARK1\u003cbr\u003eType: Front Canard\u003cbr\u003eUnpainted Finish\u003cbr\u003e\u003cbr\u003e\nThe RK Design front canards utilize the aerodynamic advantages of the stock bumper to increase front downforce and ensure tire grip without having to replace the entire bumper.\u003cbr\u003e\n\u003cbr\u003eThis RK Design - FRP Canard - Mazda - MX-5 Miata Roadster ND will complete your Mazda MX-5 Miata Roadster ND look perfectly adding downforce and saving extra weight!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMX-5 Miata Roadster RF | NDERC | 2016-2018 | NA | PE-VPR RS | I4\u003cbr\u003eMX-5 Miata Roadster | ND5RC | 2015-2018 | NA | P5-VP RS | I4\u003c!--split--\u003e","published_at":"2025-09-17T16:25:33+08:00","created_at":"2025-09-17T16:25:33+08:00","vendor":"RK Design","type":"Aero","tags":["2015","2016","2017","2018","35000x10y1.2z1500","aero","bumpers","CTB50","jp1","mazda","mx-5-miata-roadster-nd5rc-2015-2018-na-p5-vp-rs-i4","mx-5-miata-roadster-rf-nderc-2016-2018-na-pe-vpr-rs-i4","rk-design","ws18"],"price":39382,"price_min":39382,"price_max":39382,"available":true,"price_varies":false,"compare_at_price":40600,"compare_at_price_min":40600,"compare_at_price_max":40600,"compare_at_price_varies":false,"variants":[{"id":44280975392950,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ARK1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"RK Design - FRP Canard - Mazda - MX-5 Miata Roadster ND","public_title":null,"options":["Default Title"],"price":39382,"weight":2600,"compare_at_price":40600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/RK_DESIGN_a679a8b5-f89f-404f-b898-80825efb22cf.png?v=1758097535"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/RK_DESIGN_a679a8b5-f89f-404f-b898-80825efb22cf.png?v=1758097535","options":["Title"],"media":[{"alt":"RK Design - FRP Canard - Mazda - MX-5 Miata Roadster ND - Default Title ARK1 - Rzcrew Garage","id":30478013071542,"position":1,"preview_image":{"aspect_ratio":1.788,"height":344,"width":615,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/RK_DESIGN_a679a8b5-f89f-404f-b898-80825efb22cf.png?v=1758097535"},"aspect_ratio":1.788,"height":344,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/RK_DESIGN_a679a8b5-f89f-404f-b898-80825efb22cf.png?v=1758097535","width":615}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RK Design\u003cbr\u003eReference Number: ARK1\u003cbr\u003eType: Front Canard\u003cbr\u003eUnpainted Finish\u003cbr\u003e\u003cbr\u003e\nThe RK Design front canards utilize the aerodynamic advantages of the stock bumper to increase front downforce and ensure tire grip without having to replace the entire bumper.\u003cbr\u003e\n\u003cbr\u003eThis RK Design - FRP Canard - Mazda - MX-5 Miata Roadster ND will complete your Mazda MX-5 Miata Roadster ND look perfectly adding downforce and saving extra weight!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMX-5 Miata Roadster RF | NDERC | 2016-2018 | NA | PE-VPR RS | I4\u003cbr\u003eMX-5 Miata Roadster | ND5RC | 2015-2018 | NA | P5-VP RS | I4\u003c!--split--\u003e"}

{"id":8316314419382,"title":"RK Design - FRP Front Side Outlet Ducts - Mazda - MX-5 Miata Roadster ND","handle":"rk-design-frp-front-side-outlet-ducts-mazda-mx-5-miata-roadster-nd","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RK Design\u003cbr\u003eReference Number: ARK2\u003cbr\u003eType: Fenders\u003cbr\u003eUnpainted Finish\u003cbr\u003e\u003cbr\u003e\nBy expelling trapped air from the wheel arches, air resistance is reduced, significantly improving the vehicle's overall grip level.\u003cbr\u003e\n\u003cbr\u003eThis RK Design - FRP Front Side Outlet Ducts - Mazda - MX-5 Miata Roadster ND will complete your Mazda MX-5 Miata Roadster ND look perfectly adding downforce and saving extra weight!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMX-5 Miata Roadster RF | NDERC | 2016-2018 | NA | PE-VPR RS | I4\u003cbr\u003eMX-5 Miata Roadster | ND5RC | 2015-2018 | NA | P5-VP RS | I4\u003c!--split--\u003e","published_at":"2025-09-17T16:25:36+08:00","created_at":"2025-09-17T16:25:36+08:00","vendor":"RK Design","type":"Aero","tags":["2015","2016","2017","2018","65000x10y1.2z1500","aero","CTB50","fenders","jp1","mazda","mx-5-miata-roadster-nd5rc-2015-2018-na-p5-vp-rs-i4","mx-5-miata-roadster-rf-nderc-2016-2018-na-pe-vpr-rs-i4","rk-design","ws19"],"price":72288,"price_min":72288,"price_max":72288,"available":true,"price_varies":false,"compare_at_price":75300,"compare_at_price_min":75300,"compare_at_price_max":75300,"compare_at_price_varies":false,"variants":[{"id":44280975458486,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ARK2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"RK Design - FRP Front Side Outlet Ducts - Mazda - MX-5 Miata Roadster ND","public_title":null,"options":["Default Title"],"price":72288,"weight":8400,"compare_at_price":75300,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/f452d3475bc50c998324e275440e3715_3e782f08-d01f-4a07-97e3-6ff24912ad37.png?v=1758097538"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/f452d3475bc50c998324e275440e3715_3e782f08-d01f-4a07-97e3-6ff24912ad37.png?v=1758097538","options":["Title"],"media":[{"alt":"RK Design - FRP Front Side Outlet Ducts - Mazda - MX-5 Miata Roadster ND - Default Title ARK2 - Rzcrew Garage","id":30478013595830,"position":1,"preview_image":{"aspect_ratio":1.788,"height":344,"width":615,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/f452d3475bc50c998324e275440e3715_3e782f08-d01f-4a07-97e3-6ff24912ad37.png?v=1758097538"},"aspect_ratio":1.788,"height":344,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/f452d3475bc50c998324e275440e3715_3e782f08-d01f-4a07-97e3-6ff24912ad37.png?v=1758097538","width":615}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RK Design\u003cbr\u003eReference Number: ARK2\u003cbr\u003eType: Fenders\u003cbr\u003eUnpainted Finish\u003cbr\u003e\u003cbr\u003e\nBy expelling trapped air from the wheel arches, air resistance is reduced, significantly improving the vehicle's overall grip level.\u003cbr\u003e\n\u003cbr\u003eThis RK Design - FRP Front Side Outlet Ducts - Mazda - MX-5 Miata Roadster ND will complete your Mazda MX-5 Miata Roadster ND look perfectly adding downforce and saving extra weight!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMX-5 Miata Roadster RF | NDERC | 2016-2018 | NA | PE-VPR RS | I4\u003cbr\u003eMX-5 Miata Roadster | ND5RC | 2015-2018 | NA | P5-VP RS | I4\u003c!--split--\u003e"}

{"id":8316314452150,"title":"RK Design - FRP Rear Side Outlet Ducts - Mazda - MX-5 Miata Roadster ND","handle":"rk-design-frp-rear-side-outlet-ducts-mazda-mx-5-miata-roadster-nd","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RK Design\u003cbr\u003eReference Number: ARK3\u003cbr\u003eType: Fenders\u003cbr\u003eUnpainted Finish\u003cbr\u003e\u003cbr\u003e\nBy expelling trapped air from the wheel arches, air resistance is reduced, significantly improving the vehicle's overall grip level.\u003cbr\u003e\n\u003cbr\u003eThis RK Design - FRP Rear Side Outlet Ducts - Mazda - MX-5 Miata Roadster ND will complete your Mazda MX-5 Miata Roadster ND look perfectly adding downforce and saving extra weight!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMX-5 Miata Roadster RF | NDERC | 2016-2018 | NA | PE-VPR RS | I4\u003cbr\u003eMX-5 Miata Roadster | ND5RC | 2015-2018 | NA | P5-VP RS | I4\u003c!--split--\u003e","published_at":"2025-09-17T16:25:39+08:00","created_at":"2025-09-17T16:25:39+08:00","vendor":"RK Design","type":"Aero","tags":["2015","2016","2017","2018","65000x10y1.2z1500","aero","CTB50","fenders","jp1","mazda","mx-5-miata-roadster-nd5rc-2015-2018-na-p5-vp-rs-i4","mx-5-miata-roadster-rf-nderc-2016-2018-na-pe-vpr-rs-i4","rk-design","ws19"],"price":72288,"price_min":72288,"price_max":72288,"available":true,"price_varies":false,"compare_at_price":75300,"compare_at_price_min":75300,"compare_at_price_max":75300,"compare_at_price_varies":false,"variants":[{"id":44280975491254,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ARK3","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"RK Design - FRP Rear Side Outlet Ducts - Mazda - MX-5 Miata Roadster ND","public_title":null,"options":["Default Title"],"price":72288,"weight":8400,"compare_at_price":75300,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/39d719ce1aee1b864d463d0ffae8bcd2_bfcfb8f6-5b12-494f-8d9b-63c76d2e5e59.png?v=1758097541"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/39d719ce1aee1b864d463d0ffae8bcd2_bfcfb8f6-5b12-494f-8d9b-63c76d2e5e59.png?v=1758097541","options":["Title"],"media":[{"alt":"RK Design - FRP Rear Side Outlet Ducts - Mazda - MX-5 Miata Roadster ND - Default Title ARK3 - Rzcrew Garage","id":30478013825206,"position":1,"preview_image":{"aspect_ratio":1.788,"height":344,"width":615,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/39d719ce1aee1b864d463d0ffae8bcd2_bfcfb8f6-5b12-494f-8d9b-63c76d2e5e59.png?v=1758097541"},"aspect_ratio":1.788,"height":344,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/39d719ce1aee1b864d463d0ffae8bcd2_bfcfb8f6-5b12-494f-8d9b-63c76d2e5e59.png?v=1758097541","width":615}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RK Design\u003cbr\u003eReference Number: ARK3\u003cbr\u003eType: Fenders\u003cbr\u003eUnpainted Finish\u003cbr\u003e\u003cbr\u003e\nBy expelling trapped air from the wheel arches, air resistance is reduced, significantly improving the vehicle's overall grip level.\u003cbr\u003e\n\u003cbr\u003eThis RK Design - FRP Rear Side Outlet Ducts - Mazda - MX-5 Miata Roadster ND will complete your Mazda MX-5 Miata Roadster ND look perfectly adding downforce and saving extra weight!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMX-5 Miata Roadster RF | NDERC | 2016-2018 | NA | PE-VPR RS | I4\u003cbr\u003eMX-5 Miata Roadster | ND5RC | 2015-2018 | NA | P5-VP RS | I4\u003c!--split--\u003e"}

{"id":8316314517686,"title":"RK Design - FRP Side inlet ducts - Mazda - MX-5 Miata Roadster ND","handle":"rk-design-frp-side-inlet-ducts-mazda-mx-5-miata-roadster-nd","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RK Design\u003cbr\u003eReference Number: ARK4\u003cbr\u003eType: Fenders\u003cbr\u003eUnpainted Finish\u003cbr\u003e\u003cbr\u003e\nIt introduces air into the rear wheel arch and pushes out trapped air. When installed together with the side outlet, it significantly reduces drag and is also effective in cooling the brakes.\u003cbr\u003e\n\u003cbr\u003eThis RK Design - FRP Side inlet ducts - Mazda - MX-5 Miata Roadster ND will complete your Mazda MX-5 Miata Roadster ND look perfectly adding downforce and saving extra weight!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMX-5 Miata Roadster RF | NDERC | 2016-2018 | NA | PE-VPR RS | I4\u003cbr\u003eMX-5 Miata Roadster | ND5RC | 2015-2018 | NA | P5-VP RS | I4\u003c!--split--\u003e","published_at":"2025-09-17T16:25:41+08:00","created_at":"2025-09-17T16:25:41+08:00","vendor":"RK Design","type":"Aero","tags":["2015","2016","2017","2018","35000x10y1.2z1500","aero","CTB50","fenders","jp1","mazda","mx-5-miata-roadster-nd5rc-2015-2018-na-p5-vp-rs-i4","mx-5-miata-roadster-rf-nderc-2016-2018-na-pe-vpr-rs-i4","rk-design","ws18"],"price":39382,"price_min":39382,"price_max":39382,"available":true,"price_varies":false,"compare_at_price":40600,"compare_at_price_min":40600,"compare_at_price_max":40600,"compare_at_price_varies":false,"variants":[{"id":44280977260726,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ARK4","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"RK Design - FRP Side inlet ducts - Mazda - MX-5 Miata Roadster ND","public_title":null,"options":["Default Title"],"price":39382,"weight":8400,"compare_at_price":40600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/35ddc84ca8bfb479536453f630b5b687_c172a852-75ea-4fb4-8f4d-8c0527676dba.png?v=1758097543"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/35ddc84ca8bfb479536453f630b5b687_c172a852-75ea-4fb4-8f4d-8c0527676dba.png?v=1758097543","options":["Title"],"media":[{"alt":"RK Design - FRP Side inlet ducts - Mazda - MX-5 Miata Roadster ND - Default Title ARK4 - Rzcrew Garage","id":30478013956278,"position":1,"preview_image":{"aspect_ratio":1.788,"height":344,"width":615,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/35ddc84ca8bfb479536453f630b5b687_c172a852-75ea-4fb4-8f4d-8c0527676dba.png?v=1758097543"},"aspect_ratio":1.788,"height":344,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/35ddc84ca8bfb479536453f630b5b687_c172a852-75ea-4fb4-8f4d-8c0527676dba.png?v=1758097543","width":615}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RK Design\u003cbr\u003eReference Number: ARK4\u003cbr\u003eType: Fenders\u003cbr\u003eUnpainted Finish\u003cbr\u003e\u003cbr\u003e\nIt introduces air into the rear wheel arch and pushes out trapped air. When installed together with the side outlet, it significantly reduces drag and is also effective in cooling the brakes.\u003cbr\u003e\n\u003cbr\u003eThis RK Design - FRP Side inlet ducts - Mazda - MX-5 Miata Roadster ND will complete your Mazda MX-5 Miata Roadster ND look perfectly adding downforce and saving extra weight!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMX-5 Miata Roadster RF | NDERC | 2016-2018 | NA | PE-VPR RS | I4\u003cbr\u003eMX-5 Miata Roadster | ND5RC | 2015-2018 | NA | P5-VP RS | I4\u003c!--split--\u003e"}

{"id":8316314550454,"title":"RK Design - FRP TRUNK SPOILER - Mazda - MX-5 Miata Roadster ND","handle":"rk-design-frp-trunk-spoiler-mazda-mx-5-miata-roadster-nd","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RK Design\u003cbr\u003eReference Number: ARK5\u003cbr\u003eType: Spoiler\u003cbr\u003eUnpainted Finish\u003cbr\u003e\u003cbr\u003e\nThe trunk spoiler generates downforce and stabilizes the car's behavior at high speeds. Its extremely small flap shape reduces drag and maintains the original design of the Roadster.\u003cbr\u003e\n\u003cbr\u003eThis RK Design - FRP TRUNK SPOILER - Mazda - MX-5 Miata Roadster ND will complete your Mazda MX-5 Miata Roadster ND look perfectly adding downforce and saving extra weight!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMX-5 Miata Roadster RF | NDERC | 2016-2018 | NA | PE-VPR RS | I4\u003cbr\u003eMX-5 Miata Roadster | ND5RC | 2015-2018 | NA | P5-VP RS | I4\u003c!--split--\u003e","published_at":"2025-09-17T16:25:44+08:00","created_at":"2025-09-17T16:25:44+08:00","vendor":"RK Design","type":"Aero","tags":["20000x10y1.2z1500","2015","2016","2017","2018","aero","CTB50","jp1","mazda","mx-5-miata-roadster-nd5rc-2015-2018-na-p5-vp-rs-i4","mx-5-miata-roadster-rf-nderc-2016-2018-na-pe-vpr-rs-i4","rear-wing","rk-design","ws17"],"price":22736,"price_min":22736,"price_max":22736,"available":true,"price_varies":false,"compare_at_price":23200,"compare_at_price_min":23200,"compare_at_price_max":23200,"compare_at_price_varies":false,"variants":[{"id":44280977293494,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ARK5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"RK Design - FRP TRUNK SPOILER - Mazda - MX-5 Miata Roadster ND","public_title":null,"options":["Default Title"],"price":22736,"weight":8400,"compare_at_price":23200,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/b9c08ffe69374a30309379443471f300_208411a0-d65d-4d76-aaca-22605d9c58f1.png?v=1758097546"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/b9c08ffe69374a30309379443471f300_208411a0-d65d-4d76-aaca-22605d9c58f1.png?v=1758097546","options":["Title"],"media":[{"alt":"RK Design - FRP TRUNK SPOILER - Mazda - MX-5 Miata Roadster ND - Default Title ARK5 - Rzcrew Garage","id":30478014316726,"position":1,"preview_image":{"aspect_ratio":1.786,"height":379,"width":677,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/b9c08ffe69374a30309379443471f300_208411a0-d65d-4d76-aaca-22605d9c58f1.png?v=1758097546"},"aspect_ratio":1.786,"height":379,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/b9c08ffe69374a30309379443471f300_208411a0-d65d-4d76-aaca-22605d9c58f1.png?v=1758097546","width":677}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RK Design\u003cbr\u003eReference Number: ARK5\u003cbr\u003eType: Spoiler\u003cbr\u003eUnpainted Finish\u003cbr\u003e\u003cbr\u003e\nThe trunk spoiler generates downforce and stabilizes the car's behavior at high speeds. Its extremely small flap shape reduces drag and maintains the original design of the Roadster.\u003cbr\u003e\n\u003cbr\u003eThis RK Design - FRP TRUNK SPOILER - Mazda - MX-5 Miata Roadster ND will complete your Mazda MX-5 Miata Roadster ND look perfectly adding downforce and saving extra weight!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMX-5 Miata Roadster RF | NDERC | 2016-2018 | NA | PE-VPR RS | I4\u003cbr\u003eMX-5 Miata Roadster | ND5RC | 2015-2018 | NA | P5-VP RS | I4\u003c!--split--\u003e"}

{"id":7650360393910,"title":"RS Factory - Type C - FRP Front Lip - Mazda - MX-5 Miata Roadster ND","handle":"rs-factory-type-c-frp-front-lip-mazda-mx-5-miata-roadster-nd","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RS Factory\u003cbr\u003eReference Number: RZF-TYPEC-ND\u003cbr\u003eType: \u003cbr\u003eMaterial: FRP\u003cbr\u003eNotes: \u003cbr\u003eApproximative Packaging Size: 180x100x12( volumetric Weight: 43.2) \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMX-5 Miata Roadster RF | NDERC | 2016-2018 | NA | PE-VPR RS | I4\u003cbr\u003eMX-5 Miata Roadster | ND5RC | 2015-2018 | NA | P5-VP RS | I4\u003c!--split--\u003e","published_at":"2023-08-30T17:09:43+08:00","created_at":"2023-08-30T17:07:32+08:00","vendor":"RS Factory","type":"Aero","tags":["2015","2016","2017","2018","28000x5y1.4z4000","aero","CTB52","front-lip","JP1","mazda","mx-5-miata-roadster-nd5rc-2015-2018-na-p5-vp-rs-i4","mx-5-miata-roadster-rf-nderc-2016-2018-na-pe-vpr-rs-i4","rs-factory","ws113"],"price":35328,"price_min":35328,"price_max":35328,"available":true,"price_varies":false,"compare_at_price":38400,"compare_at_price_min":38400,"compare_at_price_max":38400,"compare_at_price_varies":false,"variants":[{"id":42359665459382,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RZF-TYPEC-ND","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"RS Factory - Type C - FRP Front Lip - Mazda - MX-5 Miata Roadster ND","public_title":null,"options":["Default Title"],"price":35328,"weight":43200,"compare_at_price":38400,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/rs-factory-type-c-frp-front-lip-mazda-mx-5-miata-roadster-nd-rzcrew-1.jpg?v=1710314818","\/\/rzcrewgarage.com\/cdn\/shop\/products\/rs-factory-type-c-frp-front-lip-mazda-mx-5-miata-roadster-nd-rzcrew-2.jpg?v=1710314819","\/\/rzcrewgarage.com\/cdn\/shop\/products\/rs-factory-type-c-frp-front-lip-mazda-mx-5-miata-roadster-nd-rzcrew-3.jpg?v=1710314820"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rs-factory-type-c-frp-front-lip-mazda-mx-5-miata-roadster-nd-rzcrew-1.jpg?v=1710314818","options":["Title"],"media":[{"alt":"RS Factory - Type C - FRP Front Lip - Mazda - MX-5 Miata Roadster ND - RZF-TYPEC-ND - Rzcrew Garage","id":26545852580022,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rs-factory-type-c-frp-front-lip-mazda-mx-5-miata-roadster-nd-rzcrew-1.jpg?v=1710314818"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rs-factory-type-c-frp-front-lip-mazda-mx-5-miata-roadster-nd-rzcrew-1.jpg?v=1710314818","width":640},{"alt":"RS Factory - Type C - FRP Front Lip - Mazda - MX-5 Miata Roadster ND - RZF-TYPEC-ND - Rzcrew Garage","id":26545852612790,"position":2,"preview_image":{"aspect_ratio":1.336,"height":262,"width":350,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rs-factory-type-c-frp-front-lip-mazda-mx-5-miata-roadster-nd-rzcrew-2.jpg?v=1710314819"},"aspect_ratio":1.336,"height":262,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rs-factory-type-c-frp-front-lip-mazda-mx-5-miata-roadster-nd-rzcrew-2.jpg?v=1710314819","width":350},{"alt":"RS Factory - Type C - FRP Front Lip - Mazda - MX-5 Miata Roadster ND - RZF-TYPEC-ND - Rzcrew Garage","id":26545852645558,"position":3,"preview_image":{"aspect_ratio":1.336,"height":262,"width":350,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rs-factory-type-c-frp-front-lip-mazda-mx-5-miata-roadster-nd-rzcrew-3.jpg?v=1710314820"},"aspect_ratio":1.336,"height":262,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rs-factory-type-c-frp-front-lip-mazda-mx-5-miata-roadster-nd-rzcrew-3.jpg?v=1710314820","width":350}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RS Factory\u003cbr\u003eReference Number: RZF-TYPEC-ND\u003cbr\u003eType: \u003cbr\u003eMaterial: FRP\u003cbr\u003eNotes: \u003cbr\u003eApproximative Packaging Size: 180x100x12( volumetric Weight: 43.2) \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMX-5 Miata Roadster RF | NDERC | 2016-2018 | NA | PE-VPR RS | I4\u003cbr\u003eMX-5 Miata Roadster | ND5RC | 2015-2018 | NA | P5-VP RS | I4\u003c!--split--\u003e"}

{"id":7672661442742,"title":"RS-R - Best i C \u0026 K Coilover Kit - Honda Fit-Jazz GK5","handle":"rs-r-best-i-c-k-coilover-kit-honda-fit-jazz-gk5-bickh290m","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RS-R\u003cbr\u003ePart Number: BICKH290M\u003cbr\u003e\u003cbr\u003eThe Best*i C\u0026amp;K damper includes 36-way damping force adjustment for both front and rear coilovers. Damping force can be adjusted between hard and soft giving the driver the choice between performance or ride comfort.\n\n\u003cbr\u003e\u003cbr\u003e The Best*i C\u0026amp;K is a specially designed light-weight coilover that is optimized for K-car and compact car. Based on the know-how that is gained from the Best*i, new parts are adopted and some parts are improved or optimized. All these efforts produce the smart handling and steering that compact and K-car are supposed to have.\u003cbr\u003e\nAlso we performed the strength test and endurance test many times to improve the quality and durability.\u003cbr\u003e\u003cbr\u003e\n\nThe Best*i C\u0026amp;K also comes with the same warranty for the Best*i.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eFit-Jazz | GK5 | 2013-2018 | NA | L15B7 | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2023-09-25T14:17:36+08:00","created_at":"2023-09-25T14:16:36+08:00","vendor":"RS-R","type":"Coilovers and Springs","tags":["178000x27y1z0","2013","2014","2015","2016","2017","2018","coilover-kits","coilovers-and-springs","CTA70","dampening-and-height-adjustable","fit-jazz-gk5-2013-2018-na-l15b7-i4","honda","JP1","rs-r","ws119"],"price":148436,"price_min":148436,"price_max":148436,"available":true,"price_varies":false,"compare_at_price":172600,"compare_at_price_min":172600,"compare_at_price_max":172600,"compare_at_price_varies":false,"variants":[{"id":42385343578294,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BICKH290M","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"RS-R - Best i C \u0026 K Coilover Kit - Honda Fit-Jazz GK5","public_title":null,"options":["Default Title"],"price":148436,"weight":32000,"compare_at_price":172600,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/rs-r-best-i-c-and-k-coilover-kit-honda-fit-jazz-gk5-rzcrew.jpg?v=1710314717"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rs-r-best-i-c-and-k-coilover-kit-honda-fit-jazz-gk5-rzcrew.jpg?v=1710314717","options":["Title"],"media":[{"alt":"RS-R - Best i C \u0026 K Coilover Kit - Honda Fit-Jazz GK5 - BICKH290M - Rzcrewgarage","id":26636042633398,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rs-r-best-i-c-and-k-coilover-kit-honda-fit-jazz-gk5-rzcrew.jpg?v=1710314717"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rs-r-best-i-c-and-k-coilover-kit-honda-fit-jazz-gk5-rzcrew.jpg?v=1710314717","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RS-R\u003cbr\u003ePart Number: BICKH290M\u003cbr\u003e\u003cbr\u003eThe Best*i C\u0026amp;K damper includes 36-way damping force adjustment for both front and rear coilovers. Damping force can be adjusted between hard and soft giving the driver the choice between performance or ride comfort.\n\n\u003cbr\u003e\u003cbr\u003e The Best*i C\u0026amp;K is a specially designed light-weight coilover that is optimized for K-car and compact car. Based on the know-how that is gained from the Best*i, new parts are adopted and some parts are improved or optimized. All these efforts produce the smart handling and steering that compact and K-car are supposed to have.\u003cbr\u003e\nAlso we performed the strength test and endurance test many times to improve the quality and durability.\u003cbr\u003e\u003cbr\u003e\n\nThe Best*i C\u0026amp;K also comes with the same warranty for the Best*i.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eFit-Jazz | GK5 | 2013-2018 | NA | L15B7 | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":7965010297014,"title":"RS-R - Suspension DOWN - Subaru Forester SJG APPLIED A to D","handle":"rs-r-suspension-down-subaru-forester-sjg-applied-a-to-d-f901w","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RS-R\u003cbr\u003ePart Number: F901W\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eLowering Height: 30?35mm\u003cbr\u003eSpring Rate: 3.51Kg\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eLowering Height: 40?35mm\u003cbr\u003eSpring Rate: 6.12Kg\u003cbr\u003e\u003cbr\u003eRS-R have thoroughly pursued the down amount that is not too high or too low, and set it for each car model.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eWRX STi | VAB | 2014-2018 | TC | FA20F | H4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable springs are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2024-05-28T18:13:01+08:00","created_at":"2024-05-28T18:11:28+08:00","vendor":"RS-R","type":"Springs","tags":["2012","2013","2014","2015","2016","2017","2018","47500x45y1z0","CTA416","forester-sjg-applied-a-2012-2014-na-fb20-h4","forester-sjg-applied-b-2014-2014-na-fb20-h4","forester-sjg-applied-c-2014-2015-na-fb20-h4","forester-sjg-applied-d-2015-2018-na-fb20-h4","jp1","lowering-springs","rs-r","springs","subaru","ws139"],"price":29370,"price_min":29370,"price_max":29370,"available":true,"price_varies":false,"compare_at_price":44500,"compare_at_price_min":44500,"compare_at_price_max":44500,"compare_at_price_varies":false,"variants":[{"id":43190804840630,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"F901W","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"RS-R - Suspension DOWN - Subaru Forester SJG APPLIED A to D","public_title":null,"options":["Default Title"],"price":29370,"weight":9100,"compare_at_price":44500,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/H780THD_3b1c6380-9d17-4cc6-8b07-14334376ff97.jpg?v=1723092596"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/H780THD_3b1c6380-9d17-4cc6-8b07-14334376ff97.jpg?v=1723092596","options":["Title"],"media":[{"alt":"RS-R - Suspension DOWN - Subaru Forester SJG APPLIED A to D - F901W - RZCrewGarage","id":27930582450358,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/H780THD_3b1c6380-9d17-4cc6-8b07-14334376ff97.jpg?v=1723092596"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/H780THD_3b1c6380-9d17-4cc6-8b07-14334376ff97.jpg?v=1723092596","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RS-R\u003cbr\u003ePart Number: F901W\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eLowering Height: 30?35mm\u003cbr\u003eSpring Rate: 3.51Kg\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eLowering Height: 40?35mm\u003cbr\u003eSpring Rate: 6.12Kg\u003cbr\u003e\u003cbr\u003eRS-R have thoroughly pursued the down amount that is not too high or too low, and set it for each car model.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eWRX STi | VAB | 2014-2018 | TC | FA20F | H4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable springs are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":7965010165942,"title":"RS-R - Ti2000 DOWN - Subaru Forester SJG APPLIED A to D","handle":"rs-r-ti2000-down-subaru-forester-sjg-applied-a-to-d-f901tw","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RS-R\u003cbr\u003ePart Number: F901TW\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eLowering Height: 30?35mm\u003cbr\u003eSpring Rate: 3.51Kg\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eLowering Height: 40?35mm\u003cbr\u003eSpring Rate: 6.12Kg\u003cbr\u003e\u003cbr\u003eRS-R have thoroughly pursued the down amount that is not too high or too low, and set it for each car model.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eWRX STi | VAB | 2014-2018 | TC | FA20F | H4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable springs are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2024-05-28T18:12:47+08:00","created_at":"2024-05-28T18:11:25+08:00","vendor":"RS-R","type":"Springs","tags":["2012","2013","2014","2015","2016","2017","2018","61600x45y1z0","CTA416","forester-sjg-applied-a-2012-2014-na-fb20-h4","forester-sjg-applied-b-2014-2014-na-fb20-h4","forester-sjg-applied-c-2014-2015-na-fb20-h4","forester-sjg-applied-d-2015-2018-na-fb20-h4","jp1","lowering-springs","rs-r","springs","subaru","ws138"],"price":38659,"price_min":38659,"price_max":38659,"available":true,"price_varies":false,"compare_at_price":57700,"compare_at_price_min":57700,"compare_at_price_max":57700,"compare_at_price_varies":false,"variants":[{"id":43190804250806,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"F901TW","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"RS-R - Ti2000 DOWN - Subaru Forester SJG APPLIED A to D","public_title":null,"options":["Default Title"],"price":38659,"weight":9100,"compare_at_price":57700,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/H780THD_7c7a90ee-e821-4900-b8c9-c00b515c362f.jpg?v=1723092598"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/H780THD_7c7a90ee-e821-4900-b8c9-c00b515c362f.jpg?v=1723092598","options":["Title"],"media":[{"alt":"RS-R - Ti2000 DOWN - Subaru Forester SJG APPLIED A to D - F901TW - RZCrewGarage","id":27930582220982,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/H780THD_7c7a90ee-e821-4900-b8c9-c00b515c362f.jpg?v=1723092598"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/H780THD_7c7a90ee-e821-4900-b8c9-c00b515c362f.jpg?v=1723092598","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RS-R\u003cbr\u003ePart Number: F901TW\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eLowering Height: 30?35mm\u003cbr\u003eSpring Rate: 3.51Kg\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eLowering Height: 40?35mm\u003cbr\u003eSpring Rate: 6.12Kg\u003cbr\u003e\u003cbr\u003eRS-R have thoroughly pursued the down amount that is not too high or too low, and set it for each car model.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eWRX STi | VAB | 2014-2018 | TC | FA20F | H4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable springs are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":1449615097953,"title":"Rzcrew Garage - 2\" Super Circuit Decat Pipe - Honda - CR-Z ZF1\/ZF2","handle":"rzcrew-garage-2-super-circuit-decat-pipe-honda-cr-z-zf1-zf2-zf1-zf2-cp-hcrz-s008","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Garage\u003cbr\u003eReference Number: CP-HCRZ-S008\u003cbr\u003eExhaust Type: Decat Pipe\u003cbr\u003eMaterial Used: Stainless Steel\u003cbr\u003e\u003cbr\u003eRzcrew Garage Super Circuit decat pipe are custom build to order with a perfect finish. Steadily hand crafted, this model features a 2\" pipe diameter for maximum flow and better response.All decat pipes are precision hand Tig\/Argon welded and fully 304 stainless steel mandrel bent built for a longer life span.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003cbr\u003eCR-Z | ZF2 | 2012-2018 | H | LEA | I4\u003c!--split--\u003e","published_at":"2018-11-07T18:21:59+08:00","created_at":"2018-11-07T18:22:01+08:00","vendor":"Rzcrew Garage","type":"Catbacks - Exhaust Manifolds","tags":["2010","2011","2012","2013","2014","2015","2016","2017","2018","707.868x25y1.35z150","catbacks-exhaust-manifolds","cr-z-zf1-2010-2012-h-lea-i4","cr-z-zf2-2012-2018-h-lea-i4","decat-pipe","exhaust","honda","rzcrew-garage","rzcrew-garage25","SPE6","special_hperformance","stainless-steel","ws120","ZF1\/ZF2"],"price":25245,"price_min":25245,"price_max":25245,"available":true,"price_varies":false,"compare_at_price":29700,"compare_at_price_min":29700,"compare_at_price_max":29700,"compare_at_price_varies":false,"variants":[{"id":12475582087265,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CP-HCRZ-S008","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Garage - 2\" Super Circuit Decat Pipe - Honda - CR-Z ZF1\/ZF2","public_title":null,"options":["Default Title"],"price":25245,"weight":4000,"compare_at_price":29700,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/CP-HCRZ-S008_257e83cb-c899-4f27-a505-49884d555027.jpg?v=1710168256"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/CP-HCRZ-S008_257e83cb-c899-4f27-a505-49884d555027.jpg?v=1710168256","options":["Title"],"media":[{"alt":"Rzcrew Garage - 2\" Super Circuit Decat Pipe - Honda - CR-Z ZF1\/ZF2 - ZF1\/ZF2 - CP-HCRZ-S008","id":25881999343798,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/CP-HCRZ-S008_257e83cb-c899-4f27-a505-49884d555027.jpg?v=1710168256"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/CP-HCRZ-S008_257e83cb-c899-4f27-a505-49884d555027.jpg?v=1710168256","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Garage\u003cbr\u003eReference Number: CP-HCRZ-S008\u003cbr\u003eExhaust Type: Decat Pipe\u003cbr\u003eMaterial Used: Stainless Steel\u003cbr\u003e\u003cbr\u003eRzcrew Garage Super Circuit decat pipe are custom build to order with a perfect finish. Steadily hand crafted, this model features a 2\" pipe diameter for maximum flow and better response.All decat pipes are precision hand Tig\/Argon welded and fully 304 stainless steel mandrel bent built for a longer life span.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003cbr\u003eCR-Z | ZF2 | 2012-2018 | H | LEA | I4\u003c!--split--\u003e"}

{"id":1449615130721,"title":"Rzcrew Garage - 2\" Super Circuit Decat Pipe - Honda - Fit-Jazz GK3\/GK5\/GP5","handle":"rzcrew-garage-2-super-circuit-decat-pipe-honda-fit-jazz-gk3-gk5-gp5-gk3-gk5-gp5-cp-hdfit-s001","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Garage\u003cbr\u003eReference Number: CP-HDFIT-S001\u003cbr\u003eExhaust Type: Decat Pipe\u003cbr\u003eMaterial Used: Stainless Steel\u003cbr\u003e\u003cbr\u003eRzcrew Garage Super Circuit decat pipe are custom build to order with a perfect finish. Steadily hand crafted, this model features a 2\" pipe diameter for maximum flow and better response.All decat pipes are precision hand Tig\/Argon welded and fully 304 stainless steel mandrel bent built for a longer life span.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eFit-Jazz | GK3 | 2013-2018 | NA | L13B | I4\u003cbr\u003eFit-Jazz | GK5 | 2013-2018 | NA | L15B7 | I4\u003cbr\u003eFit-Jazz Hybrid | GP5 | 2013-2018 | H | LEB | I4\u003c!--split--\u003e","published_at":"2018-11-07T18:22:02+08:00","created_at":"2018-11-07T18:22:04+08:00","vendor":"Rzcrew Garage","type":"Catbacks - Exhaust Manifolds","tags":["2013","2014","2015","2016","2017","2018","707.868x25y1.35z150","catbacks-exhaust-manifolds","decat-pipe","exhaust","fit-jazz-gk3-2013-2018-na-l13b-i4","fit-jazz-gk5-2013-2018-na-l15b7-i4","fit-jazz-hybrid-gp5-2013-2018-h-leb-i4","GK3\/GK5\/GP5","honda","rzcrew-garage","rzcrew-garage25","SPE6","special_hperformance","stainless-steel","ws120"],"price":25245,"price_min":25245,"price_max":25245,"available":true,"price_varies":false,"compare_at_price":29700,"compare_at_price_min":29700,"compare_at_price_max":29700,"compare_at_price_varies":false,"variants":[{"id":12475582120033,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CP-HDFIT-S001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Garage - 2\" Super Circuit Decat Pipe - Honda - Fit-Jazz GK3\/GK5\/GP5","public_title":null,"options":["Default Title"],"price":25245,"weight":4000,"compare_at_price":29700,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/CP-HDFIT-S001_8cca53d3-5530-49d9-9b83-3904c1d164a3.jpg?v=1710168256"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/CP-HDFIT-S001_8cca53d3-5530-49d9-9b83-3904c1d164a3.jpg?v=1710168256","options":["Title"],"media":[{"alt":"Rzcrew Garage - 2\" Super Circuit Decat Pipe - Honda - Fit-Jazz GK3\/GK5\/GP5 - GK3\/GK5\/GP5 - CP-HDFIT-S001","id":25882000392374,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/CP-HDFIT-S001_8cca53d3-5530-49d9-9b83-3904c1d164a3.jpg?v=1710168256"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/CP-HDFIT-S001_8cca53d3-5530-49d9-9b83-3904c1d164a3.jpg?v=1710168256","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Garage\u003cbr\u003eReference Number: CP-HDFIT-S001\u003cbr\u003eExhaust Type: Decat Pipe\u003cbr\u003eMaterial Used: Stainless Steel\u003cbr\u003e\u003cbr\u003eRzcrew Garage Super Circuit decat pipe are custom build to order with a perfect finish. Steadily hand crafted, this model features a 2\" pipe diameter for maximum flow and better response.All decat pipes are precision hand Tig\/Argon welded and fully 304 stainless steel mandrel bent built for a longer life span.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eFit-Jazz | GK3 | 2013-2018 | NA | L13B | I4\u003cbr\u003eFit-Jazz | GK5 | 2013-2018 | NA | L15B7 | I4\u003cbr\u003eFit-Jazz Hybrid | GP5 | 2013-2018 | H | LEB | I4\u003c!--split--\u003e"}

{"id":1904229220449,"title":"Rzcrew Garage - 2-1 Super Circuit Header - Honda - CR-Z ZF1\/ZF2","handle":"rzcrew-garage-2-1-super-circuit-header-honda-cr-z-zf1-zf2-zf1-zf2-ex-hdcrz-s001","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Garage\u003cbr\u003eReference Number: EX-HDCRZ-S001\u003cbr\u003eExhaust Type: Header\u003cbr\u003eMaterial Used: Stainless Steel\u003cbr\u003e\u003cbr\u003eRzcrew Garage Super Circuit exhaust header are custom build to order with a perfect finish. Steadily hand crafted, this model features a Tuned length 2-1 with 2.0\" secondary and 2.5\"pipes formation for better low-end torque without sacrificing higher end horsepower.All headers are precision hand Tig\/Argon welded and fully 304 stainless steel mandrel bent built for a longer life span.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003cbr\u003eCR-Z | ZF2 | 2012-2018 | H | LEA | I4\u003c!--split--\u003e","published_at":"2018-11-22T19:51:16+08:00","created_at":"2018-11-22T19:51:16+08:00","vendor":"Rzcrew Garage","type":"Catbacks - Exhaust Manifolds","tags":["1157.308x25y1.35z150","2010","2011","2012","2013","2014","2015","2016","2017","2018","catbacks-exhaust-manifolds","cr-z-zf1-2010-2012-h-lea-i4","cr-z-zf2-2012-2018-h-lea-i4","exhaust","header","honda","rzcrew-garage","rzcrew-garage25","SPE6","special_hperformance","stainless-steel","ws120","ZF1\/ZF2"],"price":41310,"price_min":41310,"price_max":41310,"available":true,"price_varies":false,"compare_at_price":48600,"compare_at_price_min":48600,"compare_at_price_max":48600,"compare_at_price_varies":false,"variants":[{"id":18151261241441,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"EX-HDCRZ-S001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Garage - 2-1 Super Circuit Header - Honda - CR-Z ZF1\/ZF2","public_title":null,"options":["Default Title"],"price":41310,"weight":8000,"compare_at_price":48600,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/EX-HDCRZ-S001_655d07f1-050d-40b9-90c8-54adea21dad7.jpg?v=1710168466"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/EX-HDCRZ-S001_655d07f1-050d-40b9-90c8-54adea21dad7.jpg?v=1710168466","options":["Title"],"media":[{"alt":"Rzcrew Garage - 2-1 Super Circuit Header - Honda - CR-Z ZF1\/ZF2 - ZF1\/ZF2 - EX-HDCRZ-S001","id":25881962217654,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/EX-HDCRZ-S001_655d07f1-050d-40b9-90c8-54adea21dad7.jpg?v=1710168466"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/EX-HDCRZ-S001_655d07f1-050d-40b9-90c8-54adea21dad7.jpg?v=1710168466","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Garage\u003cbr\u003eReference Number: EX-HDCRZ-S001\u003cbr\u003eExhaust Type: Header\u003cbr\u003eMaterial Used: Stainless Steel\u003cbr\u003e\u003cbr\u003eRzcrew Garage Super Circuit exhaust header are custom build to order with a perfect finish. Steadily hand crafted, this model features a Tuned length 2-1 with 2.0\" secondary and 2.5\"pipes formation for better low-end torque without sacrificing higher end horsepower.All headers are precision hand Tig\/Argon welded and fully 304 stainless steel mandrel bent built for a longer life span.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4\u003cbr\u003eCR-Z | ZF2 | 2012-2018 | H | LEA | I4\u003c!--split--\u003e"}