2018

{"id":6258664865974,"title":"Recaro Japan - Base Frame Seat Rail Standard Left - Nissan March K13\/K13 NISMO\/NK13 (2010-2018)","handle":"recaro-japan-base-frame-seat-rail-standard-left-nissan-march-k13-k13-nismo-nk13-2010-2018-2081-025-1","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as lowermost OEM seat. (Middle position of 3 position rail with ST-JJ) 15mm to door from OEM seat.The length of slider is 20mm shorter than OEM seat on front side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.For non-side airbag car only. 2WD.\u003cbr\u003e- CS,CSEfor back rest side and Doorarm rest interfere,seat height is raised due to use of spacers.SR-3,4,5for back rest side and DoorArm Rest approximately 10mm interfere,seat cushion side and Doorinterfere.new A-8,A-8はshoulder area andB-Pillarinterfere.Trend-J,JJ,JC,D,DCfor back rest side and DoorArm Rest approximately10-5mm interfere.Style-J,JJ,JC,D,DCfor back rest side and Doorarm rest interfere.Sport-J,JJ,JC,D,DCfor back rest side and DoorArm Rest approximately 10mm interfere.RS\/TS-# series need RS\/TS-G offset adapter(PN 1700001J\/1700001J is adjustable offset (5mm\/10mm\/15mm).RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - March - K13 (2010-2018) HR12DE\u003cbr\u003eNissan - March - K13 NISMO (2013-2018) HR15DE\u003cbr\u003eNissan - March - NK13 (2010-2018) HR12DE\u003c!--split--\u003e","published_at":"2021-02-11T13:26:22+08:00","created_at":"2021-02-11T13:26:23+08:00","vendor":"Recaro Japan","type":"Seat Accessories","tags":["2010","2011","2012","2013","2014","2015","2016","2017","2018","jp1","left","march-k13-2010-2018-na-hr12de-i3","march-k13-nismo-2013-2018-na-hr15de-i4","march-nk13-2010-2018-na-hr12de-i3","nissan","recaro-japan","seat-accessories","ws12"],"price":23324,"price_min":23324,"price_max":23324,"available":true,"price_varies":false,"compare_at_price":23800,"compare_at_price_min":23800,"compare_at_price_max":23800,"compare_at_price_varies":false,"variants":[{"id":38026220568758,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2081.025.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Left - Nissan March K13\/K13 NISMO\/NK13 (2010-2018)","public_title":null,"options":["Default Title"],"price":23324,"weight":17000,"compare_at_price":23800,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-nissan-march-k13k13-nismonk13-2010-2018-rzcrew.jpg?v=1710329619"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-nissan-march-k13k13-nismonk13-2010-2018-rzcrew.jpg?v=1710329619","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Left - Nissan March K13\/K13 NISMO\/NK13 (2010-2018) - 2081.025.1 - Rzcrewgarage","id":25432805507254,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1365,"width":1365,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-nissan-march-k13k13-nismonk13-2010-2018-rzcrew.jpg?v=1710329619"},"aspect_ratio":1.0,"height":1365,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-nissan-march-k13k13-nismonk13-2010-2018-rzcrew.jpg?v=1710329619","width":1365}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as lowermost OEM seat. (Middle position of 3 position rail with ST-JJ) 15mm to door from OEM seat.The length of slider is 20mm shorter than OEM seat on front side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.For non-side airbag car only. 2WD.\u003cbr\u003e- CS,CSEfor back rest side and Doorarm rest interfere,seat height is raised due to use of spacers.SR-3,4,5for back rest side and DoorArm Rest approximately 10mm interfere,seat cushion side and Doorinterfere.new A-8,A-8はshoulder area andB-Pillarinterfere.Trend-J,JJ,JC,D,DCfor back rest side and DoorArm Rest approximately10-5mm interfere.Style-J,JJ,JC,D,DCfor back rest side and Doorarm rest interfere.Sport-J,JJ,JC,D,DCfor back rest side and DoorArm Rest approximately 10mm interfere.RS\/TS-# series need RS\/TS-G offset adapter(PN 1700001J\/1700001J is adjustable offset (5mm\/10mm\/15mm).RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - March - K13 (2010-2018) HR12DE\u003cbr\u003eNissan - March - K13 NISMO (2013-2018) HR15DE\u003cbr\u003eNissan - March - NK13 (2010-2018) HR12DE\u003c!--split--\u003e"}

{"id":6258666438838,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Nissan Fairlady Z Z34 (2008-2018)","handle":"recaro-japan-base-frame-seat-rail-standard-right-nissan-fairlady-z-z34-2008-2018-2081-857-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator. Please use airbag canceller.Seat position:10mm higher than lowest position of OEM seat.(A case of Style-JJ)10mm to door from OEM seat.The length of slider is 20mm shorter than OEM seat on front side.TS-G\/W:The length of slider is 30mm shorter than OEM seat on rear side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.Attached a side airbag canceller. Except for Roadster.\u003cbr\u003e- SR-1,2はshoulder area andB-Pillarapproximately10mm interfere.SP-# needs SP-G offset adapter (PN 1600094J ‰CT,C-classic,CS,CSEuses spacer therefore seat position will be higher.RS\/TS-# series need RS\/TS-G offset adapter(PN 1700001J\/1700001J is adjustable offset (5mm\/10mm\/15mm).RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - Fairlady Z - Z34 (2012-2018) VQ37VHR\u003cbr\u003eNissan - Fairlady Z - Z34 (2008-2012) VQ37VHR\u003c!--split--\u003e","published_at":"2021-02-11T13:26:55+08:00","created_at":"2021-02-11T13:26:56+08:00","vendor":"Recaro Japan","type":"Seat Accessories","tags":["2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","fairlady-z-z34-kouki-2012-2018-na-vq37vhr-v6","fairlady-z-z34-zenki-2008-2012-na-vq37vhr-v6","jp1","nissan","recaro-japan","right","seat-accessories","ws12"],"price":21168,"price_min":21168,"price_max":21168,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38026222174390,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2081.857.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Nissan Fairlady Z Z34 (2008-2018)","public_title":null,"options":["Default Title"],"price":21168,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-nissan-fairlady-z-z34-2008-2018-rzcrew.jpg?v=1710329607"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-nissan-fairlady-z-z34-2008-2018-rzcrew.jpg?v=1710329607","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Nissan Fairlady Z Z34 (2008-2018) - 2081.857.2 - Rzcrewgarage","id":25432811307190,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1365,"width":1365,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-nissan-fairlady-z-z34-2008-2018-rzcrew.jpg?v=1710329607"},"aspect_ratio":1.0,"height":1365,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-nissan-fairlady-z-z34-2008-2018-rzcrew.jpg?v=1710329607","width":1365}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator. Please use airbag canceller.Seat position:10mm higher than lowest position of OEM seat.(A case of Style-JJ)10mm to door from OEM seat.The length of slider is 20mm shorter than OEM seat on front side.TS-G\/W:The length of slider is 30mm shorter than OEM seat on rear side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.Attached a side airbag canceller. Except for Roadster.\u003cbr\u003e- SR-1,2はshoulder area andB-Pillarapproximately10mm interfere.SP-# needs SP-G offset adapter (PN 1600094J ‰CT,C-classic,CS,CSEuses spacer therefore seat position will be higher.RS\/TS-# series need RS\/TS-G offset adapter(PN 1700001J\/1700001J is adjustable offset (5mm\/10mm\/15mm).RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - Fairlady Z - Z34 (2012-2018) VQ37VHR\u003cbr\u003eNissan - Fairlady Z - Z34 (2008-2012) VQ37VHR\u003c!--split--\u003e"}

{"id":6258666340534,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Nissan GT-R R35 (2007-2021)","handle":"recaro-japan-base-frame-seat-rail-standard-right-nissan-gt-r-r35-2007-2021-2081-852-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position:20mm higher than OEM seat.(A case of Style-JJ)20mm to door from OEM seat.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.For non-side airbag car only.\u003cbr\u003e- There is interference between seat backrest and door armrest. SR ,2,3,4,5,Trend,Style,Sport J,JJ,JC,D,DC=10〜20m. There is interference between seat shoulder and B-pillar.SR , ’=20〜30mm. SP-# needs SP-G offset adapter (PN 1600094J\/ There is a few mm interference between seat shoulder and B-pillar. SP-#,SP-#N=a few mm. RS\/TS-# series need RS\/TS-G offset adapter(PN 1700001J\/1700001J is adjustable offset (5mm\/10mm\/15mm).RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - GT-R - R35 (2016-2021) VR38DETT\u003cbr\u003eNissan - GT-R - R35 (2007-2010) VR38DETT\u003cbr\u003eNissan - GT-R - R35 (2010-2016) VR38DETT\u003c!--split--\u003e","published_at":"2021-02-11T13:26:52+08:00","created_at":"2021-02-11T13:26:53+08:00","vendor":"Recaro Japan","type":"Seat Accessories","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","2019","2020","2021","gt-r-r35-chuki-2010-2016-tt-vr38dett-v6","gt-r-r35-kouki-2016-2018-tt-vr38dett-v6","gt-r-r35-zenki-2007-2010-tt-vr38dett-v6","jp1","nissan","recaro-japan","right","seat-accessories","ws12"],"price":21168,"price_min":21168,"price_max":21168,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38026222108854,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2081.852.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Nissan GT-R R35 (2007-2021)","public_title":null,"options":["Default Title"],"price":21168,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-nissan-gt-r-r35-2007-2021-rzcrew.jpg?v=1710329607"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-nissan-gt-r-r35-2007-2021-rzcrew.jpg?v=1710329607","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Nissan GT-R R35 (2007-2021) - 2081.852.2 - Rzcrewgarage","id":25432810684598,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1365,"width":1365,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-nissan-gt-r-r35-2007-2021-rzcrew.jpg?v=1710329607"},"aspect_ratio":1.0,"height":1365,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-nissan-gt-r-r35-2007-2021-rzcrew.jpg?v=1710329607","width":1365}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position:20mm higher than OEM seat.(A case of Style-JJ)20mm to door from OEM seat.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.For non-side airbag car only.\u003cbr\u003e- There is interference between seat backrest and door armrest. SR ,2,3,4,5,Trend,Style,Sport J,JJ,JC,D,DC=10〜20m. There is interference between seat shoulder and B-pillar.SR , ’=20〜30mm. SP-# needs SP-G offset adapter (PN 1600094J\/ There is a few mm interference between seat shoulder and B-pillar. SP-#,SP-#N=a few mm. RS\/TS-# series need RS\/TS-G offset adapter(PN 1700001J\/1700001J is adjustable offset (5mm\/10mm\/15mm).RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - GT-R - R35 (2016-2021) VR38DETT\u003cbr\u003eNissan - GT-R - R35 (2007-2010) VR38DETT\u003cbr\u003eNissan - GT-R - R35 (2010-2016) VR38DETT\u003c!--split--\u003e"}

{"id":6258665423030,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Nissan Juke F15\/NF15\/YF15 (2010-2018)","handle":"recaro-japan-base-frame-seat-rail-standard-right-nissan-juke-f15-nf15-yf15-2010-2018-2081-315-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - Juke - F15 (2010-2018) MR16DDT\u003cbr\u003eNissan - Juke - NF15 (2010-2018) MR16DDT\u003cbr\u003eNissan - Juke - YF15 (2010-2018) HR15DE\u003c!--split--\u003e","published_at":"2021-02-11T13:26:34+08:00","created_at":"2021-02-11T13:26:35+08:00","vendor":"Recaro Japan","type":"Seat Accessories","tags":["2010","2011","2012","2013","2014","2015","2016","2017","2018","jp1","juke-f15-2010-2018-tc-mr16ddt-i4","juke-nismo-nf15-2010-2018-tc-mr16ddt-i4","juke-yf15-2010-2018-na-hr15de-i4","nissan","recaro-japan","right","seat-accessories","ws12"],"price":21168,"price_min":21168,"price_max":21168,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38026220961974,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2081.315.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Nissan Juke F15\/NF15\/YF15 (2010-2018)","public_title":null,"options":["Default Title"],"price":21168,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-nissan-juke-f15nf15yf15-2010-2018-rzcrew.jpg?v=1710329611"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-nissan-juke-f15nf15yf15-2010-2018-rzcrew.jpg?v=1710329611","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Nissan Juke F15\/NF15\/YF15 (2010-2018) - 2081.315.2 - Rzcrewgarage","id":25432805966006,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1365,"width":1365,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-nissan-juke-f15nf15yf15-2010-2018-rzcrew.jpg?v=1710329611"},"aspect_ratio":1.0,"height":1365,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-nissan-juke-f15nf15yf15-2010-2018-rzcrew.jpg?v=1710329611","width":1365}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - Juke - F15 (2010-2018) MR16DDT\u003cbr\u003eNissan - Juke - NF15 (2010-2018) MR16DDT\u003cbr\u003eNissan - Juke - YF15 (2010-2018) HR15DE\u003c!--split--\u003e"}

{"id":6258664669366,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Nissan Leaf ZE1 (2017-2025)","handle":"recaro-japan-base-frame-seat-rail-standard-right-nissan-leaf-ze1-2017-2025-2081-010-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator. Seating position: 6mm lower than the lowest height of OEM seat. (A case of New LX-F) Seat offset is same as OEM seat. The length of slider is 20 mm shorter than OEM slider.Function of seat belt reminder loses on passenger seat. (Warning lights of the seat belt will not light.)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. Attached a side airbag canceller. Modification is needed to replace rear heating switch from passenger seat to another place. Optional equipment car is unconfirmed.\u003cbr\u003e- IS-84 LX(Including JP ERGOMED series),LS,LT need thin type recliner dial(PN 1600090J) need to replace standard recliner dial on inner side to reduce interference on console side. There is interference between seat recliner and floor carpet on the most rear position. =\u0026gt; Sportster,Cross Sportster. There is a few mm interference between seat backrest side and door trim=\u0026gt;TREND. SP-#,Racer needs SP-G offset adapter (PN 1600094J).RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure): Replace with a thin recliner dial (sold separately; 2200Yen) to avoid (alleviate) interference with the car.\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#: Replace with a thin recliner dial (sold separately; 2200Yen) to avoid (alleviate) interference with the car.\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - Leaf - ZE1 (2017-2025) EV\u003c!--split--\u003e","published_at":"2021-02-11T13:26:15+08:00","created_at":"2021-02-11T13:26:15+08:00","vendor":"Recaro Japan","type":"Seat Accessories","tags":["2017","2018","2019","2020","2021","2022","2023","2024","2025","jp1","leaf-ze1-2017-2025-e-ev-e","nissan","recaro-japan","right","seat-accessories","ws12"],"price":21168,"price_min":21168,"price_max":21168,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38026220404918,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2081.010.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Nissan Leaf ZE1 (2017-2025)","public_title":null,"options":["Default Title"],"price":21168,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-nissan-leaf-ze1-2017-2025-rzcrew.jpg?v=1710329621"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-nissan-leaf-ze1-2017-2025-rzcrew.jpg?v=1710329621","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Nissan Leaf ZE1 (2017-2025) - 2081.010.2 - Rzcrewgarage","id":25432805245110,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1365,"width":1365,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-nissan-leaf-ze1-2017-2025-rzcrew.jpg?v=1710329621"},"aspect_ratio":1.0,"height":1365,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-nissan-leaf-ze1-2017-2025-rzcrew.jpg?v=1710329621","width":1365}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator. Seating position: 6mm lower than the lowest height of OEM seat. (A case of New LX-F) Seat offset is same as OEM seat. The length of slider is 20 mm shorter than OEM slider.Function of seat belt reminder loses on passenger seat. (Warning lights of the seat belt will not light.)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. Attached a side airbag canceller. Modification is needed to replace rear heating switch from passenger seat to another place. Optional equipment car is unconfirmed.\u003cbr\u003e- IS-84 LX(Including JP ERGOMED series),LS,LT need thin type recliner dial(PN 1600090J) need to replace standard recliner dial on inner side to reduce interference on console side. There is interference between seat recliner and floor carpet on the most rear position. =\u0026gt; Sportster,Cross Sportster. There is a few mm interference between seat backrest side and door trim=\u0026gt;TREND. SP-#,Racer needs SP-G offset adapter (PN 1600094J).RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure): Replace with a thin recliner dial (sold separately; 2200Yen) to avoid (alleviate) interference with the car.\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#: Replace with a thin recliner dial (sold separately; 2200Yen) to avoid (alleviate) interference with the car.\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - Leaf - ZE1 (2017-2025) EV\u003c!--split--\u003e"}

{"id":6258664931510,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Nissan March K13\/K13 NISMO\/NK13 (2010-2018)","handle":"recaro-japan-base-frame-seat-rail-standard-right-nissan-march-k13-k13-nismo-nk13-2010-2018-2081-025-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as lowermost OEM seat. (Middle position of 3 position rail with ST-JJ) 15mm to door from OEM seat.The length of slider is 20mm shorter than OEM seat on front side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.For non-side airbag car only. 2WD.\u003cbr\u003e- CS,CSEfor back rest side and Doorarm rest interfere,seat height is raised due to use of spacers.SR-3,4,5for back rest side and DoorArm Rest approximately 10mm interfere,seat cushion side and Doorinterfere.new A-8,A-8はshoulder area andB-Pillarinterfere.Trend-J,JJ,JC,D,DCfor back rest side and DoorArm Rest approximately10-5mm interfere.Style-J,JJ,JC,D,DCfor back rest side and Doorarm rest interfere.Sport-J,JJ,JC,D,DCfor back rest side and DoorArm Rest approximately 10mm interfere.RS\/TS-# series need RS\/TS-G offset adapter(PN 1700001J\/1700001J is adjustable offset (5mm\/10mm\/15mm).RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - March - K13 (2010-2018) HR12DE\u003cbr\u003eNissan - March - K13 NISMO (2013-2018) HR15DE\u003cbr\u003eNissan - March - NK13 (2010-2018) HR12DE\u003c!--split--\u003e","published_at":"2021-02-11T13:26:23+08:00","created_at":"2021-02-11T13:26:24+08:00","vendor":"Recaro Japan","type":"Seat Accessories","tags":["2010","2011","2012","2013","2014","2015","2016","2017","2018","jp1","march-k13-2010-2018-na-hr12de-i3","march-k13-nismo-2013-2018-na-hr15de-i4","march-nk13-2010-2018-na-hr12de-i3","nissan","recaro-japan","right","seat-accessories","ws12"],"price":23324,"price_min":23324,"price_max":23324,"available":true,"price_varies":false,"compare_at_price":23800,"compare_at_price_min":23800,"compare_at_price_max":23800,"compare_at_price_varies":false,"variants":[{"id":38026220634294,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2081.025.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Nissan March K13\/K13 NISMO\/NK13 (2010-2018)","public_title":null,"options":["Default Title"],"price":23324,"weight":17000,"compare_at_price":23800,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-nissan-march-k13k13-nismonk13-2010-2018-rzcrew.jpg?v=1710329613"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-nissan-march-k13k13-nismonk13-2010-2018-rzcrew.jpg?v=1710329613","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Nissan March K13\/K13 NISMO\/NK13 (2010-2018) - 2081.025.2 - Rzcrewgarage","id":25432805572790,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1365,"width":1365,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-nissan-march-k13k13-nismonk13-2010-2018-rzcrew.jpg?v=1710329613"},"aspect_ratio":1.0,"height":1365,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-nissan-march-k13k13-nismonk13-2010-2018-rzcrew.jpg?v=1710329613","width":1365}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as lowermost OEM seat. (Middle position of 3 position rail with ST-JJ) 15mm to door from OEM seat.The length of slider is 20mm shorter than OEM seat on front side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.For non-side airbag car only. 2WD.\u003cbr\u003e- CS,CSEfor back rest side and Doorarm rest interfere,seat height is raised due to use of spacers.SR-3,4,5for back rest side and DoorArm Rest approximately 10mm interfere,seat cushion side and Doorinterfere.new A-8,A-8はshoulder area andB-Pillarinterfere.Trend-J,JJ,JC,D,DCfor back rest side and DoorArm Rest approximately10-5mm interfere.Style-J,JJ,JC,D,DCfor back rest side and Doorarm rest interfere.Sport-J,JJ,JC,D,DCfor back rest side and DoorArm Rest approximately 10mm interfere.RS\/TS-# series need RS\/TS-G offset adapter(PN 1700001J\/1700001J is adjustable offset (5mm\/10mm\/15mm).RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - March - K13 (2010-2018) HR12DE\u003cbr\u003eNissan - March - K13 NISMO (2013-2018) HR15DE\u003cbr\u003eNissan - March - NK13 (2010-2018) HR12DE\u003c!--split--\u003e"}

{"id":6258666471606,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Nissan Murano PNZ51\/TNZ51\/TZ51 (2008-2018)","handle":"recaro-japan-base-frame-seat-rail-standard-right-nissan-murano-pnz51-tnz51-tz51-2008-2018-2081-859-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator. Please use airbag canceller. Seat position: height is same as lowermost OEM seat. (Middle position of 3 position rail with ST-JJ) 10mm to door from OEM seat.The length of slider is 20mm shorter than OEM seat on front side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.Attached a side airbag canceller.\u003cbr\u003e- CS,CT,C-classic CSE= the sitting position will be higher because of spacers usage. RS\/TS-# series need RS\/TS-G offset adapter(PN 1700001J\/ 1700001J is adjustable offset (5mm\/10mm\/15mm).RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - Murano - PNZ51 (2008-2018) VQ35DE\u003cbr\u003eNissan - Murano - TNZ51 (2008-2018) QR25DE\u003cbr\u003eNissan - Murano - TZ51 (2010-2018) QR25DE\u003c!--split--\u003e","published_at":"2021-02-11T13:26:56+08:00","created_at":"2021-02-11T13:26:57+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","jp1","murano-pnz51-2008-2018-na-vq35de-v6","murano-tnz51-2008-2018-na-qr25de-i4","murano-tz51-2010-2018-na-qr25de-i4","nissan","recaro-japan","right","seat-rails","ws12"],"price":21168,"price_min":21168,"price_max":21168,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38026222207158,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2081.859.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Nissan Murano PNZ51\/TNZ51\/TZ51 (2008-2018)","public_title":null,"options":["Default Title"],"price":21168,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-nissan-murano-pnz51tnz51tz51-2008-2018-rzcrew.jpg?v=1710329600"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-nissan-murano-pnz51tnz51tz51-2008-2018-rzcrew.jpg?v=1710329600","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Nissan Murano PNZ51\/TNZ51\/TZ51 (2008-2018) - 2081.859.2 - Rzcrewgarage","id":25432811339958,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1365,"width":1365,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-nissan-murano-pnz51tnz51tz51-2008-2018-rzcrew.jpg?v=1710329600"},"aspect_ratio":1.0,"height":1365,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-nissan-murano-pnz51tnz51tz51-2008-2018-rzcrew.jpg?v=1710329600","width":1365}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator. Please use airbag canceller. Seat position: height is same as lowermost OEM seat. (Middle position of 3 position rail with ST-JJ) 10mm to door from OEM seat.The length of slider is 20mm shorter than OEM seat on front side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.Attached a side airbag canceller.\u003cbr\u003e- CS,CT,C-classic CSE= the sitting position will be higher because of spacers usage. RS\/TS-# series need RS\/TS-G offset adapter(PN 1700001J\/ 1700001J is adjustable offset (5mm\/10mm\/15mm).RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - Murano - PNZ51 (2008-2018) VQ35DE\u003cbr\u003eNissan - Murano - TNZ51 (2008-2018) QR25DE\u003cbr\u003eNissan - Murano - TZ51 (2010-2018) QR25DE\u003c!--split--\u003e"}

{"id":8093105455286,"title":"Recaro Japan - RMS exclusive frame - Nissan GT-R R35","handle":"recaro-japan-rms-exclusive-frame-nissan-gt-r-r35","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003eReference Number: 2081.007.2\/ 2081.008.1\u003cbr\u003e\u003cbr\u003ePosition: \u003cbr\u003e(Note) This product cannot be installed on any seats other than those listed in the matching information below. Ultra low position frame. RMS exclusive frame, driver's seat frame (right seat). Install using the exclusive side adapter included with the base frame. Side airbag canceller included.\u003cbr\u003eNotes and Remarks:\u003cbr\u003eNew structure frame. One-position type.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe side airbag function built into the stock seat will be lost. The airbag warning light must be turned off. The seating position of the RMS can be lowered by approximately 14mm to a maximum of 55mm by adjusting the hole position of the dedicated side adapter. The steering wheel offset is center.\u003cbr\u003e\u003cbr\u003e Seat Fitting:\u003cbr\u003e RMS2600A \/ 2700G\tYou need to prepare the side adapter separately.\u003cbr\u003e\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eGT-R | R35 Zenki | 2007-2010 | TT | VR38DETT | V6,GT-R | R35 Chuki | 2010-2016 | TT | VR38DETT | V6,GT-R | R35 Kouki | 2016-2018 | TT | VR38DETT | V6\u003c!--split--\u003e","published_at":"2024-10-16T09:46:25+08:00","created_at":"2024-10-16T09:45:07+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","gt-r-r35-chuki-2010-2016-tt-vr38dett-v6","gt-r-r35-kouki-2016-2018-tt-vr38dett-v6","gt-r-r35-zenki-2007-2010-tt-vr38dett-v6","jp1","nissan","R35","recaro-japan","seat-rails","ws12"],"price":23226,"price_min":23226,"price_max":23226,"available":true,"price_varies":false,"compare_at_price":23700,"compare_at_price_min":23700,"compare_at_price_max":23700,"compare_at_price_varies":false,"variants":[{"id":43542830579894,"title":"Right","option1":"Right","option2":null,"option3":null,"sku":"2081.007.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - RMS exclusive frame - Nissan GT-R R35 - Right","public_title":"Right","options":["Right"],"price":23226,"weight":17000,"compare_at_price":23700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43542830612662,"title":"Left","option1":"Left","option2":null,"option3":null,"sku":"2081.008.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - RMS exclusive frame - Nissan GT-R R35 - Left","public_title":"Left","options":["Left"],"price":23226,"weight":17000,"compare_at_price":23700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/Recaro_seat_rail_f3dfde26-2e43-4a73-b1c4-702226a2bdff.jpg?v=1729043107"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Recaro_seat_rail_f3dfde26-2e43-4a73-b1c4-702226a2bdff.jpg?v=1729043107","options":["Side"],"media":[{"alt":"Recaro Japan - RMS exclusive frame - Nissan GT-R R35","id":28652031377590,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Recaro_seat_rail_f3dfde26-2e43-4a73-b1c4-702226a2bdff.jpg?v=1729043107"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Recaro_seat_rail_f3dfde26-2e43-4a73-b1c4-702226a2bdff.jpg?v=1729043107","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003eReference Number: 2081.007.2\/ 2081.008.1\u003cbr\u003e\u003cbr\u003ePosition: \u003cbr\u003e(Note) This product cannot be installed on any seats other than those listed in the matching information below. Ultra low position frame. RMS exclusive frame, driver's seat frame (right seat). Install using the exclusive side adapter included with the base frame. Side airbag canceller included.\u003cbr\u003eNotes and Remarks:\u003cbr\u003eNew structure frame. One-position type.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe side airbag function built into the stock seat will be lost. The airbag warning light must be turned off. The seating position of the RMS can be lowered by approximately 14mm to a maximum of 55mm by adjusting the hole position of the dedicated side adapter. The steering wheel offset is center.\u003cbr\u003e\u003cbr\u003e Seat Fitting:\u003cbr\u003e RMS2600A \/ 2700G\tYou need to prepare the side adapter separately.\u003cbr\u003e\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eGT-R | R35 Zenki | 2007-2010 | TT | VR38DETT | V6,GT-R | R35 Chuki | 2010-2016 | TT | VR38DETT | V6,GT-R | R35 Kouki | 2016-2018 | TT | VR38DETT | V6\u003c!--split--\u003e"}

{"id":1449615294561,"title":"Rzcrew Garage - 2pcs Super Circuit Decat Pipe - Nissan - GT-R R35","handle":"rzcrew-garage-2pcs-super-circuit-decat-pipe-nissan-gt-r-r35-r35-cp-gtr35-s008","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Garage\u003cbr\u003eReference Number: CP-GTR35-S008\u003cbr\u003eExhaust Type: Decat Pipe\u003cbr\u003eMaterial Used: Stainless Steel\u003cbr\u003e\u003cbr\u003eRzcrew Garage Super Circuit decat pipe are custom build to order with a perfect finish. Steadily hand crafted, this model features a 2pcs pipe diameter for maximum flow and better response.All decat pipes are precision hand Tig\/Argon welded and fully 304 stainless steel mandrel bent built for a longer life span.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eGT-R | R35 Zenki | 2007-2010 | TT | VR38DETT | V6\u003cbr\u003eGT-R | R35 Chuki | 2010-2016 | TT | VR38DETT | V6\u003cbr\u003eGT-R | R35 Kouki | 2016-2018 | TT | VR38DETT | V6\u003c!--split--\u003e","published_at":"2018-11-07T18:22:11+08:00","created_at":"2018-11-07T18:22:12+08:00","vendor":"Rzcrew Garage","type":"Catbacks - Exhaust Manifolds","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","catbacks-exhaust-manifolds","decat-pipe","exhaust","gt-r-r35-chuki-2010-2016-tt-vr38dett-v6","gt-r-r35-kouki-2016-2018-tt-vr38dett-v6","gt-r-r35-zenki-2007-2010-tt-vr38dett-v6","nissan","R35","rzcrew-garage","rzcrew-garage25","sg1","stainless-steel","ws120"],"price":78960,"price_min":78960,"price_max":78960,"available":true,"price_varies":false,"compare_at_price":98700,"compare_at_price_min":98700,"compare_at_price_max":98700,"compare_at_price_varies":false,"variants":[{"id":12475582283873,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CP-GTR35-S008","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Garage - 2pcs Super Circuit Decat Pipe - Nissan - GT-R R35","public_title":null,"options":["Default Title"],"price":78960,"weight":12000,"compare_at_price":98700,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/CP-GTR35-S008_df08a15d-38f3-4eea-8b8c-cb278d44dbe5.jpg?v=1710168265"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/CP-GTR35-S008_df08a15d-38f3-4eea-8b8c-cb278d44dbe5.jpg?v=1710168265","options":["Title"],"media":[{"alt":"Rzcrew Garage - 2pcs Super Circuit Decat Pipe - Nissan - GT-R R35 - R35 - CP-GTR35-S008","id":25882004684982,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/CP-GTR35-S008_df08a15d-38f3-4eea-8b8c-cb278d44dbe5.jpg?v=1710168265"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/CP-GTR35-S008_df08a15d-38f3-4eea-8b8c-cb278d44dbe5.jpg?v=1710168265","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Garage\u003cbr\u003eReference Number: CP-GTR35-S008\u003cbr\u003eExhaust Type: Decat Pipe\u003cbr\u003eMaterial Used: Stainless Steel\u003cbr\u003e\u003cbr\u003eRzcrew Garage Super Circuit decat pipe are custom build to order with a perfect finish. Steadily hand crafted, this model features a 2pcs pipe diameter for maximum flow and better response.All decat pipes are precision hand Tig\/Argon welded and fully 304 stainless steel mandrel bent built for a longer life span.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eGT-R | R35 Zenki | 2007-2010 | TT | VR38DETT | V6\u003cbr\u003eGT-R | R35 Chuki | 2010-2016 | TT | VR38DETT | V6\u003cbr\u003eGT-R | R35 Kouki | 2016-2018 | TT | VR38DETT | V6\u003c!--split--\u003e"}

{"id":7646610948278,"title":"Rzcrew Racing - GoTrack \"GT\" Monotube Coilover Kit - Nissan Fairlady Z Z34","handle":"rzcrew-racing-mt1gt-ni11-02","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003ePart Number: MT1GT-NI11-02\u003cbr\u003eFront Mounts: Reinforced Rubber Mount\u003cbr\u003eRear Mounts: Reinforced Rubber Mount\u003cbr\u003eSpring Rates:\u003cbr\u003eFront:12KG\u003cbr\u003eRear: 10KG\u003cbr\u003e\u003cbr\u003eRZCrew Racing GoTrack \"GT\" Series is a high-spec fast street\/race damper that focuses on performance and precise handling.\u003cbr\u003e\u003cbr\u003eUnlike traditional coilover kits that lower your car for general street driving, the GT kit provides a lowered ride and massively improved handling, thanks to higher spring rates and a redefined front \/ rear high speed balance.\u003cbr\u003eThe full body length adjustment and separate pre-load setting allow a lowered stance without sacrificing bump-stroke travel.\u003cbr\u003eIts inverted Monotube design allows for high precision driving and predictability.\u003cbr\u003e\nThe GoTrack Coilover kits feature 32-steps adjustable dampening for precise suspension tuning.\u003cbr\u003eThis suspension kit can be fully overhauled.\u003cbr\u003eWe learnt from other brands that downtime is never ideal for our customers, thus all our coilover kits carry a strict 1 year one-to-one strut replacement warranty in the case of any leak. Pillow ball are not included in the warranty yet replacement parts are avilable.\u003cbr\u003e\u003cbr\u003eOur GoTrack Coilover kits feature:\u003cbr\u003e\u003cbr\u003e- Inverted Monotube design for spirited driving and racing.\u003cbr\u003e- Full body length adjustment with separate spring pre-load to avoid bumpiness.\u003cbr\u003e- Fully treated aluminum body for strength and life span.\u003cbr\u003e- High quality Fush Silkolene oil for better damper temperature control and lower friction during hard cornering\u003cbr\u003e- Teflon springs seats to avoid squeaky noises.\u003cbr\u003e- 32 adjustement steps, for precise suspension tuning.\u003cbr\u003e- Free choice of spring rate depending on model.\u003cbr\u003e- 1 year one-to-one replacement strut on any leak.\u003cbr\u003e- The RZCrew Racing GT Monotube Coilovers are track-tested, and their reliability has been proven during the 2019 Sepang 1000km Race held in Malaysia. Our suspensions completed the race with no sign of leakage or registered fatigue during the after-race inspection.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eFairlady Z | Z34 Zenki | 2008-2012 | NA | VQ37VHR | V6\u003cbr\u003eFairlady Z | Z34 Kouki | 2012-2018 | NA | VQ37VHR | V6\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2023-08-20T13:07:22+08:00","created_at":"2023-08-20T12:31:00+08:00","vendor":"Rzcrew Racing","type":"Coilovers and Springs","tags":["2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","coilovers-and-springs","dampening-and-height-adjustable","fairlady-z-z34-kouki-2012-2018-na-vq37vhr-v6","fairlady-z-z34-zenki-2008-2012-na-vq37vhr-v6","nissan","rzcrew-garage","rzcrew-racing","sg1","ws112"],"price":95920,"price_min":95920,"price_max":95920,"available":true,"price_varies":false,"compare_at_price":109000,"compare_at_price_min":109000,"compare_at_price_max":109000,"compare_at_price_varies":false,"variants":[{"id":42348666126518,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MT1GT-NI11-02","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - GoTrack \"GT\" Monotube Coilover Kit - Nissan Fairlady Z Z34","public_title":null,"options":["Default Title"],"price":95920,"weight":25000,"compare_at_price":109000,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-coilover-kit-nissan-fairlady-z-z34-rzcrew.jpg?v=1710315284"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-coilover-kit-nissan-fairlady-z-z34-rzcrew.jpg?v=1710315284","options":["Title"],"media":[{"alt":"Rzcrew Racing - GoTrack \"GT\" Monotube Coilover Kit - Nissan Fairlady Z Z34 - RZCrewGarage","id":26512235200694,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1408,"width":1877,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-coilover-kit-nissan-fairlady-z-z34-rzcrew.jpg?v=1710315284"},"aspect_ratio":1.333,"height":1408,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-coilover-kit-nissan-fairlady-z-z34-rzcrew.jpg?v=1710315284","width":1877}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003ePart Number: MT1GT-NI11-02\u003cbr\u003eFront Mounts: Reinforced Rubber Mount\u003cbr\u003eRear Mounts: Reinforced Rubber Mount\u003cbr\u003eSpring Rates:\u003cbr\u003eFront:12KG\u003cbr\u003eRear: 10KG\u003cbr\u003e\u003cbr\u003eRZCrew Racing GoTrack \"GT\" Series is a high-spec fast street\/race damper that focuses on performance and precise handling.\u003cbr\u003e\u003cbr\u003eUnlike traditional coilover kits that lower your car for general street driving, the GT kit provides a lowered ride and massively improved handling, thanks to higher spring rates and a redefined front \/ rear high speed balance.\u003cbr\u003eThe full body length adjustment and separate pre-load setting allow a lowered stance without sacrificing bump-stroke travel.\u003cbr\u003eIts inverted Monotube design allows for high precision driving and predictability.\u003cbr\u003e\nThe GoTrack Coilover kits feature 32-steps adjustable dampening for precise suspension tuning.\u003cbr\u003eThis suspension kit can be fully overhauled.\u003cbr\u003eWe learnt from other brands that downtime is never ideal for our customers, thus all our coilover kits carry a strict 1 year one-to-one strut replacement warranty in the case of any leak. Pillow ball are not included in the warranty yet replacement parts are avilable.\u003cbr\u003e\u003cbr\u003eOur GoTrack Coilover kits feature:\u003cbr\u003e\u003cbr\u003e- Inverted Monotube design for spirited driving and racing.\u003cbr\u003e- Full body length adjustment with separate spring pre-load to avoid bumpiness.\u003cbr\u003e- Fully treated aluminum body for strength and life span.\u003cbr\u003e- High quality Fush Silkolene oil for better damper temperature control and lower friction during hard cornering\u003cbr\u003e- Teflon springs seats to avoid squeaky noises.\u003cbr\u003e- 32 adjustement steps, for precise suspension tuning.\u003cbr\u003e- Free choice of spring rate depending on model.\u003cbr\u003e- 1 year one-to-one replacement strut on any leak.\u003cbr\u003e- The RZCrew Racing GT Monotube Coilovers are track-tested, and their reliability has been proven during the 2019 Sepang 1000km Race held in Malaysia. Our suspensions completed the race with no sign of leakage or registered fatigue during the after-race inspection.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eFairlady Z | Z34 Zenki | 2008-2012 | NA | VQ37VHR | V6\u003cbr\u003eFairlady Z | Z34 Kouki | 2012-2018 | NA | VQ37VHR | V6\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":7646610882742,"title":"Rzcrew Racing - GoTrack \"GT\" Monotube Coilover Kit - Nissan GT-R R35","handle":"rzcrew-racing-mt1gt-ni09-08","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003ePart Number: MT1GT-NI09-08\u003cbr\u003eFront Mounts: Reinforced Rubber Mount\u003cbr\u003eRear Mounts: Reinforced Rubber Mount\u003cbr\u003eSpring Rates:\u003cbr\u003eFront:16KG\u003cbr\u003eRear: 12KG\u003cbr\u003e\u003cbr\u003eRZCrew Racing GoTrack \"GT\" Series is a high-spec fast street\/race damper that focuses on performance and precise handling.\u003cbr\u003e\u003cbr\u003eUnlike traditional coilover kits that lower your car for general street driving, the GT kit provides a lowered ride and massively improved handling, thanks to higher spring rates and a redefined front \/ rear high speed balance.\u003cbr\u003eThe full body length adjustment and separate pre-load setting allow a lowered stance without sacrificing bump-stroke travel.\u003cbr\u003eIts inverted Monotube design allows for high precision driving and predictability.\u003cbr\u003e\nThe GoTrack Coilover kits feature 32-steps adjustable dampening for precise suspension tuning.\u003cbr\u003eThis suspension kit can be fully overhauled.\u003cbr\u003eWe learnt from other brands that downtime is never ideal for our customers, thus all our coilover kits carry a strict 1 year one-to-one strut replacement warranty in the case of any leak. Pillow ball are not included in the warranty yet replacement parts are avilable.\u003cbr\u003e\u003cbr\u003eOur GoTrack Coilover kits feature:\u003cbr\u003e\u003cbr\u003e- Inverted Monotube design for spirited driving and racing.\u003cbr\u003e- Full body length adjustment with separate spring pre-load to avoid bumpiness.\u003cbr\u003e- Fully treated aluminum body for strength and life span.\u003cbr\u003e- High quality Fush Silkolene oil for better damper temperature control and lower friction during hard cornering\u003cbr\u003e- Teflon springs seats to avoid squeaky noises.\u003cbr\u003e- 32 adjustement steps, for precise suspension tuning.\u003cbr\u003e- Free choice of spring rate depending on model.\u003cbr\u003e- 1 year one-to-one replacement strut on any leak.\u003cbr\u003e- The RZCrew Racing GT Monotube Coilovers are track-tested, and their reliability has been proven during the 2019 Sepang 1000km Race held in Malaysia. Our suspensions completed the race with no sign of leakage or registered fatigue during the after-race inspection.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eGT-R | R35 Zenki | 2007-2010 | TT | VR38DETT | V6\u003cbr\u003eGT-R | R35 Chuki | 2010-2016 | TT | VR38DETT | V6\u003cbr\u003eGT-R | R35 Kouki | 2016-2018 | TT | VR38DETT | V6\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2023-08-20T13:07:26+08:00","created_at":"2023-08-20T12:30:56+08:00","vendor":"Rzcrew Racing","type":"Coilovers and Springs","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","coilovers-and-springs","dampening-and-height-adjustable","gt-r-r35-chuki-2010-2016-tt-vr38dett-v6","gt-r-r35-kouki-2016-2018-tt-vr38dett-v6","gt-r-r35-zenki-2007-2010-tt-vr38dett-v6","nissan","rzcrew-garage","rzcrew-racing","sg1","ws112"],"price":122320,"price_min":122320,"price_max":122320,"available":true,"price_varies":false,"compare_at_price":139000,"compare_at_price_min":139000,"compare_at_price_max":139000,"compare_at_price_varies":false,"variants":[{"id":42348666060982,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MT1GT-NI09-08","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - GoTrack \"GT\" Monotube Coilover Kit - Nissan GT-R R35","public_title":null,"options":["Default Title"],"price":122320,"weight":25000,"compare_at_price":139000,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-coilover-kit-nissan-gt-r-r35-rzcrew.jpg?v=1710315291"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-coilover-kit-nissan-gt-r-r35-rzcrew.jpg?v=1710315291","options":["Title"],"media":[{"alt":"Rzcrew Racing - GoTrack \"GT\" Monotube Coilover Kit - Nissan GT-R R35 - RZCrewGarage","id":26512235102390,"position":1,"preview_image":{"aspect_ratio":1.329,"height":1429,"width":1899,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-coilover-kit-nissan-gt-r-r35-rzcrew.jpg?v=1710315291"},"aspect_ratio":1.329,"height":1429,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-coilover-kit-nissan-gt-r-r35-rzcrew.jpg?v=1710315291","width":1899}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003ePart Number: MT1GT-NI09-08\u003cbr\u003eFront Mounts: Reinforced Rubber Mount\u003cbr\u003eRear Mounts: Reinforced Rubber Mount\u003cbr\u003eSpring Rates:\u003cbr\u003eFront:16KG\u003cbr\u003eRear: 12KG\u003cbr\u003e\u003cbr\u003eRZCrew Racing GoTrack \"GT\" Series is a high-spec fast street\/race damper that focuses on performance and precise handling.\u003cbr\u003e\u003cbr\u003eUnlike traditional coilover kits that lower your car for general street driving, the GT kit provides a lowered ride and massively improved handling, thanks to higher spring rates and a redefined front \/ rear high speed balance.\u003cbr\u003eThe full body length adjustment and separate pre-load setting allow a lowered stance without sacrificing bump-stroke travel.\u003cbr\u003eIts inverted Monotube design allows for high precision driving and predictability.\u003cbr\u003e\nThe GoTrack Coilover kits feature 32-steps adjustable dampening for precise suspension tuning.\u003cbr\u003eThis suspension kit can be fully overhauled.\u003cbr\u003eWe learnt from other brands that downtime is never ideal for our customers, thus all our coilover kits carry a strict 1 year one-to-one strut replacement warranty in the case of any leak. Pillow ball are not included in the warranty yet replacement parts are avilable.\u003cbr\u003e\u003cbr\u003eOur GoTrack Coilover kits feature:\u003cbr\u003e\u003cbr\u003e- Inverted Monotube design for spirited driving and racing.\u003cbr\u003e- Full body length adjustment with separate spring pre-load to avoid bumpiness.\u003cbr\u003e- Fully treated aluminum body for strength and life span.\u003cbr\u003e- High quality Fush Silkolene oil for better damper temperature control and lower friction during hard cornering\u003cbr\u003e- Teflon springs seats to avoid squeaky noises.\u003cbr\u003e- 32 adjustement steps, for precise suspension tuning.\u003cbr\u003e- Free choice of spring rate depending on model.\u003cbr\u003e- 1 year one-to-one replacement strut on any leak.\u003cbr\u003e- The RZCrew Racing GT Monotube Coilovers are track-tested, and their reliability has been proven during the 2019 Sepang 1000km Race held in Malaysia. Our suspensions completed the race with no sign of leakage or registered fatigue during the after-race inspection.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eGT-R | R35 Zenki | 2007-2010 | TT | VR38DETT | V6\u003cbr\u003eGT-R | R35 Chuki | 2010-2016 | TT | VR38DETT | V6\u003cbr\u003eGT-R | R35 Kouki | 2016-2018 | TT | VR38DETT | V6\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":7646607474870,"title":"Rzcrew Racing - GoTrack \"GT\" Monotube Coilover Kit - Nissan March K13","handle":"rzcrew-racing-mt1gt-ni01-03","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003ePart Number: MT1GT-NI01-03\u003cbr\u003eFront Mounts: N\/A\u003cbr\u003eRear Mounts: N\/A\u003cbr\u003eSpring Rates:\u003cbr\u003eFront:5KG\u003cbr\u003eRear: 4.5KG\u003cbr\u003e\u003cbr\u003eRZCrew Racing GoTrack \"GT\" Series is a high-spec fast street\/race damper that focuses on performance and precise handling.\u003cbr\u003e\u003cbr\u003eUnlike traditional coilover kits that lower your car for general street driving, the GT kit provides a lowered ride and massively improved handling, thanks to higher spring rates and a redefined front \/ rear high speed balance.\u003cbr\u003eThe full body length adjustment and separate pre-load setting allow a lowered stance without sacrificing bump-stroke travel.\u003cbr\u003eIts inverted Monotube design allows for high precision driving and predictability.\u003cbr\u003e\nThe GoTrack Coilover kits feature 32-steps adjustable dampening for precise suspension tuning.\u003cbr\u003eThis suspension kit can be fully overhauled.\u003cbr\u003eWe learnt from other brands that downtime is never ideal for our customers, thus all our coilover kits carry a strict 1 year one-to-one strut replacement warranty in the case of any leak. Pillow ball are not included in the warranty yet replacement parts are avilable.\u003cbr\u003e\u003cbr\u003eOur GoTrack Coilover kits feature:\u003cbr\u003e\u003cbr\u003e- Inverted Monotube design for spirited driving and racing.\u003cbr\u003e- Full body length adjustment with separate spring pre-load to avoid bumpiness.\u003cbr\u003e- Fully treated aluminum body for strength and life span.\u003cbr\u003e- High quality Fush Silkolene oil for better damper temperature control and lower friction during hard cornering\u003cbr\u003e- Teflon springs seats to avoid squeaky noises.\u003cbr\u003e- 32 adjustement steps, for precise suspension tuning.\u003cbr\u003e- Free choice of spring rate depending on model.\u003cbr\u003e- 1 year one-to-one replacement strut on any leak.\u003cbr\u003e- The RZCrew Racing GT Monotube Coilovers are track-tested, and their reliability has been proven during the 2019 Sepang 1000km Race held in Malaysia. Our suspensions completed the race with no sign of leakage or registered fatigue during the after-race inspection.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMarch | K13 | 2010-2018 | NA | HR12DE | I3\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2023-08-20T13:07:01+08:00","created_at":"2023-08-20T12:27:36+08:00","vendor":"Rzcrew Racing","type":"Coilovers and Springs","tags":["2010","2011","2012","2013","2014","2015","2016","2017","2018","coilovers-and-springs","dampening-and-height-adjustable","march-k13-2010-2018-na-hr12de-i3","nissan","rzcrew-garage","rzcrew-racing","sg1","ws112"],"price":95920,"price_min":95920,"price_max":95920,"available":true,"price_varies":false,"compare_at_price":109000,"compare_at_price_min":109000,"compare_at_price_max":109000,"compare_at_price_varies":false,"variants":[{"id":42348661833910,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MT1GT-NI01-03","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - GoTrack \"GT\" Monotube Coilover Kit - Nissan March K13","public_title":null,"options":["Default Title"],"price":95920,"weight":25000,"compare_at_price":109000,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-coilover-kit-nissan-march-k13-rzcrew.jpg?v=1710315352"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-coilover-kit-nissan-march-k13-rzcrew.jpg?v=1710315352","options":["Title"],"media":[{"alt":"Rzcrew Racing - GoTrack \"GT\" Monotube Coilover Kit - Nissan March K13 - RZCrewGarage","id":26512216850614,"position":1,"preview_image":{"aspect_ratio":1.329,"height":1429,"width":1899,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-coilover-kit-nissan-march-k13-rzcrew.jpg?v=1710315352"},"aspect_ratio":1.329,"height":1429,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-coilover-kit-nissan-march-k13-rzcrew.jpg?v=1710315352","width":1899}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003ePart Number: MT1GT-NI01-03\u003cbr\u003eFront Mounts: N\/A\u003cbr\u003eRear Mounts: N\/A\u003cbr\u003eSpring Rates:\u003cbr\u003eFront:5KG\u003cbr\u003eRear: 4.5KG\u003cbr\u003e\u003cbr\u003eRZCrew Racing GoTrack \"GT\" Series is a high-spec fast street\/race damper that focuses on performance and precise handling.\u003cbr\u003e\u003cbr\u003eUnlike traditional coilover kits that lower your car for general street driving, the GT kit provides a lowered ride and massively improved handling, thanks to higher spring rates and a redefined front \/ rear high speed balance.\u003cbr\u003eThe full body length adjustment and separate pre-load setting allow a lowered stance without sacrificing bump-stroke travel.\u003cbr\u003eIts inverted Monotube design allows for high precision driving and predictability.\u003cbr\u003e\nThe GoTrack Coilover kits feature 32-steps adjustable dampening for precise suspension tuning.\u003cbr\u003eThis suspension kit can be fully overhauled.\u003cbr\u003eWe learnt from other brands that downtime is never ideal for our customers, thus all our coilover kits carry a strict 1 year one-to-one strut replacement warranty in the case of any leak. Pillow ball are not included in the warranty yet replacement parts are avilable.\u003cbr\u003e\u003cbr\u003eOur GoTrack Coilover kits feature:\u003cbr\u003e\u003cbr\u003e- Inverted Monotube design for spirited driving and racing.\u003cbr\u003e- Full body length adjustment with separate spring pre-load to avoid bumpiness.\u003cbr\u003e- Fully treated aluminum body for strength and life span.\u003cbr\u003e- High quality Fush Silkolene oil for better damper temperature control and lower friction during hard cornering\u003cbr\u003e- Teflon springs seats to avoid squeaky noises.\u003cbr\u003e- 32 adjustement steps, for precise suspension tuning.\u003cbr\u003e- Free choice of spring rate depending on model.\u003cbr\u003e- 1 year one-to-one replacement strut on any leak.\u003cbr\u003e- The RZCrew Racing GT Monotube Coilovers are track-tested, and their reliability has been proven during the 2019 Sepang 1000km Race held in Malaysia. Our suspensions completed the race with no sign of leakage or registered fatigue during the after-race inspection.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMarch | K13 | 2010-2018 | NA | HR12DE | I3\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":7646610849974,"title":"Rzcrew Racing - GoTrack \"GT\" Monotube Coilover Kit - Nissan Skyline Sedan V36","handle":"rzcrew-racing-mt1gt-ni09-07","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003ePart Number: MT1GT-NI09-07\u003cbr\u003eFront Mounts: Reinforced Rubber Mount\u003cbr\u003eRear Mounts: Reinforced Rubber Mount\u003cbr\u003eSpring Rates:\u003cbr\u003eFront:12KG\u003cbr\u003eRear: 10KG\u003cbr\u003e\u003cbr\u003eRZCrew Racing GoTrack \"GT\" Series is a high-spec fast street\/race damper that focuses on performance and precise handling.\u003cbr\u003e\u003cbr\u003eUnlike traditional coilover kits that lower your car for general street driving, the GT kit provides a lowered ride and massively improved handling, thanks to higher spring rates and a redefined front \/ rear high speed balance.\u003cbr\u003eThe full body length adjustment and separate pre-load setting allow a lowered stance without sacrificing bump-stroke travel.\u003cbr\u003eIts inverted Monotube design allows for high precision driving and predictability.\u003cbr\u003e\nThe GoTrack Coilover kits feature 32-steps adjustable dampening for precise suspension tuning.\u003cbr\u003eThis suspension kit can be fully overhauled.\u003cbr\u003eWe learnt from other brands that downtime is never ideal for our customers, thus all our coilover kits carry a strict 1 year one-to-one strut replacement warranty in the case of any leak. Pillow ball are not included in the warranty yet replacement parts are avilable.\u003cbr\u003e\u003cbr\u003eOur GoTrack Coilover kits feature:\u003cbr\u003e\u003cbr\u003e- Inverted Monotube design for spirited driving and racing.\u003cbr\u003e- Full body length adjustment with separate spring pre-load to avoid bumpiness.\u003cbr\u003e- Fully treated aluminum body for strength and life span.\u003cbr\u003e- High quality Fush Silkolene oil for better damper temperature control and lower friction during hard cornering\u003cbr\u003e- Teflon springs seats to avoid squeaky noises.\u003cbr\u003e- 32 adjustement steps, for precise suspension tuning.\u003cbr\u003e- Free choice of spring rate depending on model.\u003cbr\u003e- 1 year one-to-one replacement strut on any leak.\u003cbr\u003e- The RZCrew Racing GT Monotube Coilovers are track-tested, and their reliability has been proven during the 2019 Sepang 1000km Race held in Malaysia. Our suspensions completed the race with no sign of leakage or registered fatigue during the after-race inspection.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline Sedan | V36 Zenki | 2006-2007 | NA | VQ25HR | V6\u003cbr\u003eSkyline Sedan | V36 Chuki | 2007-2008 | NA | VQ25HR | V6\u003cbr\u003eSkyline Sedan | V36 Kouki | 2008-2018 | NA | VQ25HR | V6\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2023-08-20T13:07:21+08:00","created_at":"2023-08-20T12:30:54+08:00","vendor":"Rzcrew Racing","type":"Coilovers and Springs","tags":["2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","coilovers-and-springs","dampening-and-height-adjustable","nissan","rzcrew-garage","rzcrew-racing","sg1","skyline-sedan-v36-chuki-2007-2008-na-vq25hr-v6","skyline-sedan-v36-kouki-2008-2018-na-vq25hr-v6","skyline-sedan-v36-zenki-2006-2007-na-vq25hr-v6","ws112"],"price":95920,"price_min":95920,"price_max":95920,"available":true,"price_varies":false,"compare_at_price":109000,"compare_at_price_min":109000,"compare_at_price_max":109000,"compare_at_price_varies":false,"variants":[{"id":42348666028214,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MT1GT-NI09-07","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - GoTrack \"GT\" Monotube Coilover Kit - Nissan Skyline Sedan V36","public_title":null,"options":["Default Title"],"price":95920,"weight":25000,"compare_at_price":109000,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-coilover-kit-nissan-skyline-sedan-v36-rzcrew.jpg?v=1710315291"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-coilover-kit-nissan-skyline-sedan-v36-rzcrew.jpg?v=1710315291","options":["Title"],"media":[{"alt":"Rzcrew Racing - GoTrack \"GT\" Monotube Coilover Kit - Nissan Skyline Sedan V36 - RZCrewGarage","id":26512235069622,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1408,"width":1877,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-coilover-kit-nissan-skyline-sedan-v36-rzcrew.jpg?v=1710315291"},"aspect_ratio":1.333,"height":1408,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-coilover-kit-nissan-skyline-sedan-v36-rzcrew.jpg?v=1710315291","width":1877}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003ePart Number: MT1GT-NI09-07\u003cbr\u003eFront Mounts: Reinforced Rubber Mount\u003cbr\u003eRear Mounts: Reinforced Rubber Mount\u003cbr\u003eSpring Rates:\u003cbr\u003eFront:12KG\u003cbr\u003eRear: 10KG\u003cbr\u003e\u003cbr\u003eRZCrew Racing GoTrack \"GT\" Series is a high-spec fast street\/race damper that focuses on performance and precise handling.\u003cbr\u003e\u003cbr\u003eUnlike traditional coilover kits that lower your car for general street driving, the GT kit provides a lowered ride and massively improved handling, thanks to higher spring rates and a redefined front \/ rear high speed balance.\u003cbr\u003eThe full body length adjustment and separate pre-load setting allow a lowered stance without sacrificing bump-stroke travel.\u003cbr\u003eIts inverted Monotube design allows for high precision driving and predictability.\u003cbr\u003e\nThe GoTrack Coilover kits feature 32-steps adjustable dampening for precise suspension tuning.\u003cbr\u003eThis suspension kit can be fully overhauled.\u003cbr\u003eWe learnt from other brands that downtime is never ideal for our customers, thus all our coilover kits carry a strict 1 year one-to-one strut replacement warranty in the case of any leak. Pillow ball are not included in the warranty yet replacement parts are avilable.\u003cbr\u003e\u003cbr\u003eOur GoTrack Coilover kits feature:\u003cbr\u003e\u003cbr\u003e- Inverted Monotube design for spirited driving and racing.\u003cbr\u003e- Full body length adjustment with separate spring pre-load to avoid bumpiness.\u003cbr\u003e- Fully treated aluminum body for strength and life span.\u003cbr\u003e- High quality Fush Silkolene oil for better damper temperature control and lower friction during hard cornering\u003cbr\u003e- Teflon springs seats to avoid squeaky noises.\u003cbr\u003e- 32 adjustement steps, for precise suspension tuning.\u003cbr\u003e- Free choice of spring rate depending on model.\u003cbr\u003e- 1 year one-to-one replacement strut on any leak.\u003cbr\u003e- The RZCrew Racing GT Monotube Coilovers are track-tested, and their reliability has been proven during the 2019 Sepang 1000km Race held in Malaysia. Our suspensions completed the race with no sign of leakage or registered fatigue during the after-race inspection.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline Sedan | V36 Zenki | 2006-2007 | NA | VQ25HR | V6\u003cbr\u003eSkyline Sedan | V36 Chuki | 2007-2008 | NA | VQ25HR | V6\u003cbr\u003eSkyline Sedan | V36 Kouki | 2008-2018 | NA | VQ25HR | V6\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":2095451013217,"title":"Samco Japan - 2 Pcs Cooling Hoses Set Radiator - Nissan - Fairlady Z Z34","handle":"samco-japan-2-pcs-cooling-hoses-set-radiator-nissan-fairlady-z-z34-40tcs430-c","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Samco Japan\u003cbr\u003ePart Number: 40TCS430\/C\u003cbr\u003eHose Type: Cooling Hoses\u003cbr\u003eHose Numbers per set: 2\u003cbr\u003eHose Colour (Please leave us a note during checkout): Standard color:\tBlue \/ Red \/ Black \/ Green \/ Yellow \/ Orange\u003cbr\u003e\u003cbr\u003eSamco is the leader in the Cooling hose system for a reason. Their Unique 3 to 5 plies design ensure long lasting qualities to any type of usages: Boost, Cooling, Fueling. Their design is composed of:\u003cbr\u003eOuter surface coating to resist extreem deterioration to heat or cold.\u003cbr\u003eUnique 3 to 5 plies lamination superposing original silicone material and aramid fiber on 3 to 5 layers depending on the item and hose diameter, the strength exceeds by far any OEM units.\nThe 5 kg \/ cm2 normal maximum pressure resistance (in the case of inner diameter 25 mm) prevents hose expansion and \nburst.\u003cbr\u003ePrecise and carefully hand-made construction creates an extremely flat inner surface, completely eliminating stress on the fluid . In addition, \nall sections are covered by adopting suitable treatment for applications such as oil, fuel, heat resistance.\u003cbr\u003e\u003cbr\u003ePlease note that all Hoses from Samco are made to order: allow 6 to 8 weeks lead time. Colour are customisable on order, let us know during checkout in the notes. All Samco Hoses sold on our website are garantied original and follow their strict warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eFairlady Z | Z34 Zenki | 2008-2012 | NA | VQ37VHR | V6\u003cbr\u003eFairlady Z | Z34 Kouki | 2012-2018 | NA | VQ37VHR | V6\u003c!--split--\u003e","published_at":"2019-04-26T16:18:01+08:00","created_at":"2019-04-26T16:18:02+08:00","vendor":"Samco Japan","type":"Cooling Hoses","tags":["2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","cooling","cooling-hoses","coolinghoses","fairlady-z-z34-kouki-2012-2018-na-vq37vhr-v6","fairlady-z-z34-zenki-2008-2012-na-vq37vhr-v6","jp1","new","nissan","samco-japan","ws114"],"price":21328,"price_min":21328,"price_max":21328,"available":true,"price_varies":false,"compare_at_price":24800,"compare_at_price_min":24800,"compare_at_price_max":24800,"compare_at_price_varies":false,"variants":[{"id":19755634851937,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"40TCS430\/C","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Samco Japan - 2 Pcs Cooling Hoses Set Radiator - Nissan - Fairlady Z Z34","public_title":null,"options":["Default Title"],"price":21328,"weight":6000,"compare_at_price":24800,"inventory_quantity":46,"inventory_management":"shopify","inventory_policy":"deny","barcode":"40TCS430C","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_2_hoses_radiator_kit_0c74fafe-060e-4695-8c2b-e9e74e86548d.jpg?v=1710179401"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_2_hoses_radiator_kit_0c74fafe-060e-4695-8c2b-e9e74e86548d.jpg?v=1710179401","options":["Title"],"media":[{"alt":"Samco Japan - 2 Pcs Cooling Hoses Set Radiator - Nissan - Fairlady Z Z34 - 40TCS430\/C - RZCREWGARAGE","id":26388475773110,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_2_hoses_radiator_kit_0c74fafe-060e-4695-8c2b-e9e74e86548d.jpg?v=1710179401"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_2_hoses_radiator_kit_0c74fafe-060e-4695-8c2b-e9e74e86548d.jpg?v=1710179401","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Samco Japan\u003cbr\u003ePart Number: 40TCS430\/C\u003cbr\u003eHose Type: Cooling Hoses\u003cbr\u003eHose Numbers per set: 2\u003cbr\u003eHose Colour (Please leave us a note during checkout): Standard color:\tBlue \/ Red \/ Black \/ Green \/ Yellow \/ Orange\u003cbr\u003e\u003cbr\u003eSamco is the leader in the Cooling hose system for a reason. Their Unique 3 to 5 plies design ensure long lasting qualities to any type of usages: Boost, Cooling, Fueling. Their design is composed of:\u003cbr\u003eOuter surface coating to resist extreem deterioration to heat or cold.\u003cbr\u003eUnique 3 to 5 plies lamination superposing original silicone material and aramid fiber on 3 to 5 layers depending on the item and hose diameter, the strength exceeds by far any OEM units.\nThe 5 kg \/ cm2 normal maximum pressure resistance (in the case of inner diameter 25 mm) prevents hose expansion and \nburst.\u003cbr\u003ePrecise and carefully hand-made construction creates an extremely flat inner surface, completely eliminating stress on the fluid . In addition, \nall sections are covered by adopting suitable treatment for applications such as oil, fuel, heat resistance.\u003cbr\u003e\u003cbr\u003ePlease note that all Hoses from Samco are made to order: allow 6 to 8 weeks lead time. Colour are customisable on order, let us know during checkout in the notes. All Samco Hoses sold on our website are garantied original and follow their strict warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eFairlady Z | Z34 Zenki | 2008-2012 | NA | VQ37VHR | V6\u003cbr\u003eFairlady Z | Z34 Kouki | 2012-2018 | NA | VQ37VHR | V6\u003c!--split--\u003e"}

{"id":380978823195,"title":"Sard Radiator Hoses set - Nissan - Fairlady Z Z34 VQ37VHR","handle":"sard-radiator-hoses-set-nissan-fairlady-z-z34-vq37vhr-79552","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Sard\u003cbr\u003ePart Number: 79552\u003cbr\u003eHose Type: Water Hoses\u003cbr\u003e\u003cbr\u003eThe SARD Radiator Hoses are made from pressure-tight 3 ply structure for a better resistance to heat and decay. This price is for a set of 2 Sard Hoses ( Return and feed line)\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eFairlady Z | Z34 Zenki | 2008-2012 | NA | VQ37VHR | V6\u003cbr\u003eFairlady Z | Z34 Kouki | 2012-2018 | NA | VQ37VHR | V6\u003c!--split--\u003e","published_at":"2017-11-28T23:37:46+08:00","created_at":"2017-11-28T23:37:46+08:00","vendor":"Sard","type":"Cooling Hoses","tags":["2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","cooling","cooling-hoses","coolinghoses","fairlady-z-z34-kouki-2012-2018-na-vq37vhr-v6","fairlady-z-z34-zenki-2008-2012-na-vq37vhr-v6","jp1","nissan","sard","ws19"],"price":17836,"price_min":17836,"price_max":17836,"available":true,"price_varies":false,"compare_at_price":19600,"compare_at_price_min":19600,"compare_at_price_max":19600,"compare_at_price_varies":false,"variants":[{"id":4857927139355,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"79552","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Sard Radiator Hoses set - Nissan - Fairlady Z Z34 VQ37VHR","public_title":null,"options":["Default Title"],"price":17836,"weight":6000,"compare_at_price":19600,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Sard_hose_1f90abe2-1cdf-49e1-81f4-c155d3993983.jpg?v=1710146219"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Sard_hose_1f90abe2-1cdf-49e1-81f4-c155d3993983.jpg?v=1710146219","options":["Title"],"media":[{"alt":"Sard Radiator Hoses set - Nissan - Fairlady Z Z34 VQ37VHR - 79552 - RZCREWGARAGE","id":26388480655542,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Sard_hose_1f90abe2-1cdf-49e1-81f4-c155d3993983.jpg?v=1710146219"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Sard_hose_1f90abe2-1cdf-49e1-81f4-c155d3993983.jpg?v=1710146219","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Sard\u003cbr\u003ePart Number: 79552\u003cbr\u003eHose Type: Water Hoses\u003cbr\u003e\u003cbr\u003eThe SARD Radiator Hoses are made from pressure-tight 3 ply structure for a better resistance to heat and decay. This price is for a set of 2 Sard Hoses ( Return and feed line)\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eFairlady Z | Z34 Zenki | 2008-2012 | NA | VQ37VHR | V6\u003cbr\u003eFairlady Z | Z34 Kouki | 2012-2018 | NA | VQ37VHR | V6\u003c!--split--\u003e"}

{"id":1433319047265,"title":"Spoon Rigid Collar Kit - Front - Nissan Cube Z12","handle":"spoon-rigid-collar-kit-front-nissan-cube-z12-50261-y12-1000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-Y12-1000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCube | Z12 | 2008-2018 | NA | HR15DE | I4\u003c!--split--\u003e","published_at":"2018-09-23T15:21:39+08:00","created_at":"2018-09-23T15:21:40+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","collar-kits","cube-z12-2008-2018-na-hr15de-i4","front","jp1","nissan","rigid-collars","spoon","ws17","Z12"],"price":19530,"price_min":19530,"price_max":19530,"available":true,"price_varies":false,"compare_at_price":21000,"compare_at_price_min":21000,"compare_at_price_max":21000,"compare_at_price_varies":false,"variants":[{"id":12435576455265,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-Y12-1000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Nissan Cube Z12","public_title":null,"options":["Default Title"],"price":19530,"weight":1100,"compare_at_price":21000,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_7af5dc1a-5969-4f77-be43-84d799587cf8.jpg?v=1710167840"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_7af5dc1a-5969-4f77-be43-84d799587cf8.jpg?v=1710167840","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Nissan Cube Z12 - 50261-Y12-1000 - RZCrewGarage","id":22882173714614,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_7af5dc1a-5969-4f77-be43-84d799587cf8.jpg?v=1710167840"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_7af5dc1a-5969-4f77-be43-84d799587cf8.jpg?v=1710167840","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-Y12-1000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCube | Z12 | 2008-2018 | NA | HR15DE | I4\u003c!--split--\u003e"}

{"id":1433318457441,"title":"Spoon Rigid Collar Kit - Front - Nissan Days B21W","handle":"spoon-rigid-collar-kit-front-nissan-days-b21w-50261-b21-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-B21-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eDays | B21W | 2013-2018 | NA | 3B20 | I3\u003c!--split--\u003e","published_at":"2018-09-23T15:21:12+08:00","created_at":"2018-09-23T15:21:13+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2013","2014","2015","2016","2017","2018","B21W","collar-kits","days-b21w-2013-2018-na-3b20-i3","front","jp1","nissan","rigid-collars","spoon","ws17"],"price":13671,"price_min":13671,"price_max":13671,"available":true,"price_varies":false,"compare_at_price":14700,"compare_at_price_min":14700,"compare_at_price_max":14700,"compare_at_price_varies":false,"variants":[{"id":12435575865441,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-B21-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Nissan Days B21W","public_title":null,"options":["Default Title"],"price":13671,"weight":1100,"compare_at_price":14700,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_7f1f7670-44de-44e7-a62b-b648bd136bc8.jpg?v=1710167831"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_7f1f7670-44de-44e7-a62b-b648bd136bc8.jpg?v=1710167831","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Nissan Days B21W - 50261-B21-000 - RZCrewGarage","id":22882171945142,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_7f1f7670-44de-44e7-a62b-b648bd136bc8.jpg?v=1710167831"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_7f1f7670-44de-44e7-a62b-b648bd136bc8.jpg?v=1710167831","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-B21-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eDays | B21W | 2013-2018 | NA | 3B20 | I3\u003c!--split--\u003e"}

{"id":1433318522977,"title":"Spoon Rigid Collar Kit - Front - Nissan Days Roox B21A","handle":"spoon-rigid-collar-kit-front-nissan-days-roox-b21a-50261-b21-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-B21-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eDays Roox | B21A | 2014-2018 | NA | 3B20 | I3\u003c!--split--\u003e","published_at":"2018-09-23T15:21:16+08:00","created_at":"2018-09-23T15:21:17+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2014","2015","2016","2017","2018","B21A","collar-kits","days-roox-b21a-2014-2018-na-3b20-i3","front","jp1","nissan","rigid-collars","spoon","ws17"],"price":13671,"price_min":13671,"price_max":13671,"available":true,"price_varies":false,"compare_at_price":14700,"compare_at_price_min":14700,"compare_at_price_max":14700,"compare_at_price_varies":false,"variants":[{"id":12435575930977,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-B21-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Nissan Days Roox B21A","public_title":null,"options":["Default Title"],"price":13671,"weight":1100,"compare_at_price":14700,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_e31c8602-b6c5-49c9-9cc9-be90db9b3f8a.jpg?v=1710167831"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_e31c8602-b6c5-49c9-9cc9-be90db9b3f8a.jpg?v=1710167831","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Nissan Days Roox B21A - 50261-B21-000 - RZCrewGarage","id":22882172141750,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_e31c8602-b6c5-49c9-9cc9-be90db9b3f8a.jpg?v=1710167831"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_e31c8602-b6c5-49c9-9cc9-be90db9b3f8a.jpg?v=1710167831","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-B21-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eDays Roox | B21A | 2014-2018 | NA | 3B20 | I3\u003c!--split--\u003e"}

{"id":1433319932001,"title":"Spoon Rigid Collar Kit - Front - Nissan Fairlady Z Z34","handle":"spoon-rigid-collar-kit-front-nissan-fairlady-z-z34-50261-v36-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-V36-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eFairlady Z | Z34 Zenki | 2008-2012 | NA | VQ37VHR | V6\u003cbr\u003eFairlady Z | Z34 Kouki | 2012-2018 | NA | VQ37VHR | V6\u003c!--split--\u003e","published_at":"2018-09-23T15:22:19+08:00","created_at":"2018-09-23T15:22:20+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","collar-kits","fairlady-z-z34-kouki-2012-2018-na-vq37vhr-v6","fairlady-z-z34-zenki-2008-2012-na-vq37vhr-v6","front","jp1","nissan","rigid-collars","spoon","ws17","Z34"],"price":19530,"price_min":19530,"price_max":19530,"available":true,"price_varies":false,"compare_at_price":21000,"compare_at_price_min":21000,"compare_at_price_max":21000,"compare_at_price_varies":false,"variants":[{"id":12435577340001,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-V36-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Nissan Fairlady Z Z34","public_title":null,"options":["Default Title"],"price":19530,"weight":1100,"compare_at_price":21000,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_eccb31a3-0aee-4c0a-a69f-aeb4444a8327.jpg?v=1710167857"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_eccb31a3-0aee-4c0a-a69f-aeb4444a8327.jpg?v=1710167857","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Nissan Fairlady Z Z34 - 50261-V36-000 - RZCrewGarage","id":22882175516854,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_eccb31a3-0aee-4c0a-a69f-aeb4444a8327.jpg?v=1710167857"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_eccb31a3-0aee-4c0a-a69f-aeb4444a8327.jpg?v=1710167857","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-V36-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eFairlady Z | Z34 Zenki | 2008-2012 | NA | VQ37VHR | V6\u003cbr\u003eFairlady Z | Z34 Kouki | 2012-2018 | NA | VQ37VHR | V6\u003c!--split--\u003e"}

{"id":1433319178337,"title":"Spoon Rigid Collar Kit - Front - Nissan Juke Nismo NF15","handle":"spoon-rigid-collar-kit-front-nissan-juke-nismo-nf15-50261-c26-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-C26-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eJuke Nismo | NF15 | 2010-2018 | TC | MR16DDT | I4\u003c!--split--\u003e","published_at":"2018-09-23T15:21:45+08:00","created_at":"2018-09-23T15:21:45+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2010","2011","2012","2013","2014","2015","2016","2017","2018","collar-kits","front","jp1","juke-nismo-nf15-2010-2018-tc-mr16ddt-i4","NF15","nissan","rigid-collars","spoon","ws17"],"price":19530,"price_min":19530,"price_max":19530,"available":true,"price_varies":false,"compare_at_price":21000,"compare_at_price_min":21000,"compare_at_price_max":21000,"compare_at_price_varies":false,"variants":[{"id":12435576586337,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-C26-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Nissan Juke Nismo NF15","public_title":null,"options":["Default Title"],"price":19530,"weight":1100,"compare_at_price":21000,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_9b83fb3b-9fee-4403-a959-7cb61234a7b9.jpg?v=1710167840"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_9b83fb3b-9fee-4403-a959-7cb61234a7b9.jpg?v=1710167840","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Nissan Juke Nismo NF15 - 50261-C26-000 - RZCrewGarage","id":22882174107830,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_9b83fb3b-9fee-4403-a959-7cb61234a7b9.jpg?v=1710167840"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_9b83fb3b-9fee-4403-a959-7cb61234a7b9.jpg?v=1710167840","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-C26-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eJuke Nismo | NF15 | 2010-2018 | TC | MR16DDT | I4\u003c!--split--\u003e"}

{"id":1433320194145,"title":"Spoon Rigid Collar Kit - Front - Nissan Lafesta B30","handle":"spoon-rigid-collar-kit-front-nissan-lafesta-b30-50261-c26-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-C26-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eLafesta | B30 | 2007-2018 | NA | MR20DE | I4\u003c!--split--\u003e","published_at":"2018-09-23T15:22:31+08:00","created_at":"2018-09-23T15:22:32+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","B30","collar-kits","front","jp1","lafesta-b30-2007-2018-na-mr20de-i4","nissan","rigid-collars","spoon","ws17"],"price":19530,"price_min":19530,"price_max":19530,"available":true,"price_varies":false,"compare_at_price":21000,"compare_at_price_min":21000,"compare_at_price_max":21000,"compare_at_price_varies":false,"variants":[{"id":12435577602145,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-C26-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Nissan Lafesta B30","public_title":null,"options":["Default Title"],"price":19530,"weight":1100,"compare_at_price":21000,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_39fe8a69-2ccd-4d0d-a4d6-5b6b79bef540.jpg?v=1710167867"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_39fe8a69-2ccd-4d0d-a4d6-5b6b79bef540.jpg?v=1710167867","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Nissan Lafesta B30 - 50261-C26-000 - RZCrewGarage","id":22882176532662,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_39fe8a69-2ccd-4d0d-a4d6-5b6b79bef540.jpg?v=1710167867"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_39fe8a69-2ccd-4d0d-a4d6-5b6b79bef540.jpg?v=1710167867","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-C26-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eLafesta | B30 | 2007-2018 | NA | MR20DE | I4\u003c!--split--\u003e"}

{"id":1433320128609,"title":"Spoon Rigid Collar Kit - Front - Nissan March K13","handle":"spoon-rigid-collar-kit-front-nissan-march-k13-50261-e12-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-E12-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMarch | K13 | 2010-2018 | NA | HR12DE | I3\u003c!--split--\u003e","published_at":"2018-09-23T15:22:28+08:00","created_at":"2018-09-23T15:22:29+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2010","2011","2012","2013","2014","2015","2016","2017","2018","collar-kits","front","jp1","K13","march-k13-2010-2018-na-hr12de-i3","nissan","rigid-collars","spoon","ws17"],"price":19530,"price_min":19530,"price_max":19530,"available":true,"price_varies":false,"compare_at_price":21000,"compare_at_price_min":21000,"compare_at_price_max":21000,"compare_at_price_varies":false,"variants":[{"id":12435577536609,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-E12-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Nissan March K13","public_title":null,"options":["Default Title"],"price":19530,"weight":1100,"compare_at_price":21000,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_4cbe24db-a4c0-4059-8435-c2e31074423d.jpg?v=1710167867"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_4cbe24db-a4c0-4059-8435-c2e31074423d.jpg?v=1710167867","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Nissan March K13 - 50261-E12-000 - RZCrewGarage","id":22882176270518,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_4cbe24db-a4c0-4059-8435-c2e31074423d.jpg?v=1710167867"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_4cbe24db-a4c0-4059-8435-c2e31074423d.jpg?v=1710167867","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-E12-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMarch | K13 | 2010-2018 | NA | HR12DE | I3\u003c!--split--\u003e"}

{"id":1433319735393,"title":"Spoon Rigid Collar Kit - Front - Nissan Note HE12","handle":"spoon-rigid-collar-kit-front-nissan-note-he12-50261-e12-001","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-E12-001\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eNote | HE12 | 2016-2018 | NA | HR12DE | I3\u003c!--split--\u003e","published_at":"2018-09-23T15:22:10+08:00","created_at":"2018-09-23T15:22:11+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2016","2017","2018","collar-kits","front","HE12","jp1","nissan","note-he12-2016-2018-na-hr12de-i3","rigid-collars","spoon","ws17"],"price":19530,"price_min":19530,"price_max":19530,"available":true,"price_varies":false,"compare_at_price":21000,"compare_at_price_min":21000,"compare_at_price_max":21000,"compare_at_price_varies":false,"variants":[{"id":12435577143393,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-E12-001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Nissan Note HE12","public_title":null,"options":["Default Title"],"price":19530,"weight":1100,"compare_at_price":21000,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_1da0949f-1629-42e2-a311-60afe89c2368.jpg?v=1710167855"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_1da0949f-1629-42e2-a311-60afe89c2368.jpg?v=1710167855","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Nissan Note HE12 - 50261-E12-001 - RZCrewGarage","id":22882175287478,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_1da0949f-1629-42e2-a311-60afe89c2368.jpg?v=1710167855"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_1da0949f-1629-42e2-a311-60afe89c2368.jpg?v=1710167855","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-E12-001\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eNote | HE12 | 2016-2018 | NA | HR12DE | I3\u003c!--split--\u003e"}

{"id":1433319374945,"title":"Spoon Rigid Collar Kit - Front - Nissan Skyline Crossover J50","handle":"spoon-rigid-collar-kit-front-nissan-skyline-crossover-j50-50261-v36-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-V36-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline Crossover | J50 | 2009-2018 | NA | VQ37VHR | V6\u003c!--split--\u003e","published_at":"2018-09-23T15:21:55+08:00","created_at":"2018-09-23T15:21:56+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","collar-kits","front","J50","jp1","nissan","rigid-collars","skyline-crossover-j50-2009-2018-na-vq37vhr-v6","spoon","ws17"],"price":19530,"price_min":19530,"price_max":19530,"available":true,"price_varies":false,"compare_at_price":21000,"compare_at_price_min":21000,"compare_at_price_max":21000,"compare_at_price_varies":false,"variants":[{"id":12435576782945,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-V36-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Nissan Skyline Crossover J50","public_title":null,"options":["Default Title"],"price":19530,"weight":1100,"compare_at_price":21000,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_e0e8b387-555f-4abf-a4f0-cebefeea922e.jpg?v=1710167850"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_e0e8b387-555f-4abf-a4f0-cebefeea922e.jpg?v=1710167850","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Nissan Skyline Crossover J50 - 50261-V36-000 - RZCrewGarage","id":22882174632118,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_e0e8b387-555f-4abf-a4f0-cebefeea922e.jpg?v=1710167850"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_e0e8b387-555f-4abf-a4f0-cebefeea922e.jpg?v=1710167850","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-V36-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline Crossover | J50 | 2009-2018 | NA | VQ37VHR | V6\u003c!--split--\u003e"}