{"id":6267194409142,"title":"Recaro Japan - Base Frame Seat Rail Standard Left - Suzuki Swift Sport ZC33S (2017-2020)","handle":"recaro-japan-base-frame-seat-rail-standard-left-suzuki-swift-sport-zc33s-2017-2020-2088-004-1","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. \u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- The side airbag function with a built-in genuine seat will be lost. Vehicles equipped with side airbags need to turn off the airbag warning light. When the RECARO seat is attached to the passenger seat, the occupant detection sensor will not function and the warning light on the seat belt will not light up. The seating position is about 18mm higher than the lowermost position of the genuine seat height adjustment function at the standard position with the attached 20mm (6 + 7 + 7mm) spacer. (When using New LX-F). The steering wheel offset is from the steering wheel center, and RECARO is about 7mm closer to the door side (3mm door side than the genuine seat). The amount of seat slide is reduced by about 20 mm compared to the genuine product.\u003cbr\u003e\u003cbr\u003eThe console and seat cushion interfere with each other in the front position of the seat slide. SPORT and Orthopedo are about 5mm. SP- # and racer require SP-G offset adapter set (6600 yen \u003cproduct number\u003e). Adjust the RMS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold side adapter for RMS. Also, if there is interference with the interior, it can be alleviated by adjustment. Adjust the RCS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold RCS side adapter. Adjust the RMS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold side adapter for RMS. Also, if there is interference with the interior, it can be alleviated by adjustment. Adjust the RCS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold RCS side adapter.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- CSE: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- CT: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- C-Classic: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Swift Sport - ZC33S (2017-2018) K14C\u003cbr\u003eSuzuki - Swift Sport - ZC33S (2017-2020) K14C\u003c!--split--\u003e\u003c\/product\u003e","published_at":"2021-02-16T20:53:01+08:00","created_at":"2021-02-16T20:53:02+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2017","2018","2019","2020","jp1","left","recaro-japan","seat-rails","suzuki","swift-sport-zc33s-2017-2018-tc-k14c-i4","ws10"],"price":21600,"price_min":21600,"price_max":21600,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38045016031414,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2088.004.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Left - Suzuki Swift Sport ZC33S (2017-2020)","public_title":null,"options":["Default Title"],"price":21600,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-suzuki-swift-sport-zc33s-2017-2020-rzcrew.jpg?v=1710326883"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-suzuki-swift-sport-zc33s-2017-2020-rzcrew.jpg?v=1710326883","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Left - Suzuki Swift Sport ZC33S (2017-2020) - 2088.004.1 - Rzcrewgarage","id":22850260959414,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-suzuki-swift-sport-zc33s-2017-2020-rzcrew.jpg?v=1710326883"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-suzuki-swift-sport-zc33s-2017-2020-rzcrew.jpg?v=1710326883","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. \u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- The side airbag function with a built-in genuine seat will be lost. Vehicles equipped with side airbags need to turn off the airbag warning light. When the RECARO seat is attached to the passenger seat, the occupant detection sensor will not function and the warning light on the seat belt will not light up. The seating position is about 18mm higher than the lowermost position of the genuine seat height adjustment function at the standard position with the attached 20mm (6 + 7 + 7mm) spacer. (When using New LX-F). The steering wheel offset is from the steering wheel center, and RECARO is about 7mm closer to the door side (3mm door side than the genuine seat). The amount of seat slide is reduced by about 20 mm compared to the genuine product.\u003cbr\u003e\u003cbr\u003eThe console and seat cushion interfere with each other in the front position of the seat slide. SPORT and Orthopedo are about 5mm. SP- # and racer require SP-G offset adapter set (6600 yen \u003cproduct number\u003e). Adjust the RMS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold side adapter for RMS. Also, if there is interference with the interior, it can be alleviated by adjustment. Adjust the RCS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold RCS side adapter. Adjust the RMS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold side adapter for RMS. Also, if there is interference with the interior, it can be alleviated by adjustment. Adjust the RCS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold RCS side adapter.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- CSE: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- CT: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- C-Classic: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Swift Sport - ZC33S (2017-2018) K14C\u003cbr\u003eSuzuki - Swift Sport - ZC33S (2017-2020) K14C\u003c!--split--\u003e\u003c\/product\u003e"}

Recaro Japan - Base Frame Seat Rail Standard Left - Suzuki Swift Sport ZC33S (2017-2020)

Check products, lead time and fitting infos in the tabs below!
Sku: 2088.004.1
Vendor: Recaro Japan
Availability: Usually ships within 20 to 30 days.
Shipping time is additional. Choose your option in the cart page.
$216.00
Maximum quantity available reached.
SPECIFICATIONS
Manufacturer: Recaro Japan
Position: Left
Type: New-type frame.

PRODUCT NOTES:
- The side airbag function with a built-in genuine seat will be lost. Vehicles equipped with side airbags need to turn off the airbag warning light. When the RECARO seat is attached to the passenger seat, the occupant detection sensor will not function and the warning light on the seat belt will not light up. The seating position is about 18mm higher than the lowermost position of the genuine seat height adjustment function at the standard position with the attached 20mm (6 + 7 + 7mm) spacer. (When using New LX-F). The steering wheel offset is from the steering wheel center, and RECARO is about 7mm closer to the door side (3mm door side than the genuine seat). The amount of seat slide is reduced by about 20 mm compared to the genuine product.

The console and seat cushion interfere with each other in the front position of the seat slide. SPORT and Orthopedo are about 5mm. SP- # and racer require SP-G offset adapter set (6600 yen ). Adjust the RMS to the optimum position (front-back height, left-right offset 0/5/10 mm) with the separately sold side adapter for RMS. Also, if there is interference with the interior, it can be alleviated by adjustment. Adjust the RCS to the optimum position (front-back height, left-right offset 0/5/10 mm) with the separately sold RCS side adapter. Adjust the RMS to the optimum position (front-back height, left-right offset 0/5/10 mm) with the separately sold side adapter for RMS. Also, if there is interference with the interior, it can be alleviated by adjustment. Adjust the RCS to the optimum position (front-back height, left-right offset 0/5/10 mm) with the separately sold RCS side adapter.

COMPATIBILITY NOTES:
Fits the following seats:
- LX / LX-# / LX-VS / LX-VF / ERGOMED / ERGOMED C/ ERGOMED D/ ERGOMED E / ERGOMED LD / ERGOMED MV (Based on IS-84 structure)
- LX-F (Based on IS-05 structure)
- LS / LS-# / LT-#
- CS / CR / CG / COMFOMED: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.
- CSE: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.
- CT: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.
- C-Classic: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.
- RMS2600A / 2700G: A separate side adapter must be provided.
- New Orthopead (with RECARO Vent)
- RCS: A separate side adapter must be provided.
- SR-2 late model / SR-3 / SR-4 / SR-5
- Rally Special / First Generation SR / SR-2 early model
- Late model A-8
- Early model A-8
- SP-G / SP-A: A separate side adapter must be provided.
- SP-GN / SP-AN: A separate side adapter must be provided.
- RACER SP-G/A: A separate side adapter must be provided.
- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC
- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC
- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC
- AM19 TREND-JS
- AM19 STYLE-JS
- AM19 SPORT-JS
- AM19 TREND-D AM19 TREND-DC
- AM19 STYLE-D AM19 STYLE-DC
- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV
- TS-# / RS-#: A separate side adapter must be provided.
- SP-X
- SR-6 / SR-7 / SR-7F / SR-11
- Sportster / Cross Sportster
- Armrest: 2 or 3


DISCLAIMER:
Product picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right/Left).
Car Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.
Taxes:

Singapore and Malaysia: All import taxes are included in our pricing.

Rest of the World: Other countries may have to pay their local import tax depending on your country's regulations.
Shipping:

This product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.
Every Monday our team keeps you in the loop by sending out an "estimated time of arrival" email.
This part fits:

Suzuki - Swift Sport - ZC33S (2017-2018) K14C
Suzuki - Swift Sport - ZC33S (2017-2020) K14C

Related Products


People who bought this product, also bought