All

{"id":420723556379,"title":"K\u0026N High Flow Drop in Filter - Nissan - Fairlady Z z34","handle":"high-flow-drop-in-filter-z34-33-2399","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: K\u0026amp;N\u003cbr\u003eReference Number: 33-2399\u003cbr\u003eIntake Type: Drop In Filter\u003cbr\u003e\u003cbr\u003eK\u0026amp;N High flow drop in Filter are perfect for a performance bump or simply oem replacement:\u003cbr\u003eHigh Air Flow with Excellent Filtration\u003cbr\u003eDesigned to Increase Horsepower and Acceleration\u003cbr\u003eWashable and Reusable\u003cbr\u003eWill NOT Void Vehicle Warranty\u003cbr\u003eLasts up to 50,000 miles before cleaning is required depending on driving conditions\u003cbr\u003eK\u0026amp;N Million Mile Limited Warranty\u003cbr\u003eEmissions Legal in all 50 US States.\u003cbr\u003eEconomical, a K\u0026amp;N Air Filter Will Last the Life of Your Automobile\u003cbr\u003eWorks with Original Equipment Manufacturer Vehicle Electronics\u003cbr\u003eEasy High Performance Add-on\u003cbr\u003eEnvironmentally Friendly\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eFairlady Z | Z34 Zenki | 2008-2012 | NA | VQ37VHR | V6\u003cbr\u003eFairlady Z | Z34 Kouki | 2012-2018 | NA | VQ37VHR | V6\u003c!--split--\u003e","published_at":"2017-12-09T00:14:24+08:00","created_at":"2017-12-09T00:14:25+08:00","vendor":"K\u0026N","type":"Intake Kits","tags":["2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","drop-in-filter","fairlady-z-z34-kouki-2012-2018-na-vq37vhr-v6","fairlady-z-z34-zenki-2008-2012-na-vq37vhr-v6","intake","intake-kits","k-n","nissan","us1","ws17"],"price":7533,"price_min":7533,"price_max":7533,"available":true,"price_varies":false,"compare_at_price":8100,"compare_at_price_min":8100,"compare_at_price_max":8100,"compare_at_price_varies":false,"variants":[{"id":5119528206363,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"33-2399","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"K\u0026N High Flow Drop in Filter - Nissan - Fairlady Z z34","public_title":null,"options":["Default Title"],"price":7533,"weight":2500,"compare_at_price":8100,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/33-5044_425dd6f7-4b9a-41a6-a654-c4c791dce7a2.jpg?v=1710151608"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/33-5044_425dd6f7-4b9a-41a6-a654-c4c791dce7a2.jpg?v=1710151608","options":["Title"],"media":[{"alt":"High Flow Drop in Filter - z34 - 33-2399","id":25426651283638,"position":1,"preview_image":{"aspect_ratio":1.498,"height":534,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/33-5044_425dd6f7-4b9a-41a6-a654-c4c791dce7a2.jpg?v=1710151608"},"aspect_ratio":1.498,"height":534,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/33-5044_425dd6f7-4b9a-41a6-a654-c4c791dce7a2.jpg?v=1710151608","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: K\u0026amp;N\u003cbr\u003eReference Number: 33-2399\u003cbr\u003eIntake Type: Drop In Filter\u003cbr\u003e\u003cbr\u003eK\u0026amp;N High flow drop in Filter are perfect for a performance bump or simply oem replacement:\u003cbr\u003eHigh Air Flow with Excellent Filtration\u003cbr\u003eDesigned to Increase Horsepower and Acceleration\u003cbr\u003eWashable and Reusable\u003cbr\u003eWill NOT Void Vehicle Warranty\u003cbr\u003eLasts up to 50,000 miles before cleaning is required depending on driving conditions\u003cbr\u003eK\u0026amp;N Million Mile Limited Warranty\u003cbr\u003eEmissions Legal in all 50 US States.\u003cbr\u003eEconomical, a K\u0026amp;N Air Filter Will Last the Life of Your Automobile\u003cbr\u003eWorks with Original Equipment Manufacturer Vehicle Electronics\u003cbr\u003eEasy High Performance Add-on\u003cbr\u003eEnvironmentally Friendly\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eFairlady Z | Z34 Zenki | 2008-2012 | NA | VQ37VHR | V6\u003cbr\u003eFairlady Z | Z34 Kouki | 2012-2018 | NA | VQ37VHR | V6\u003c!--split--\u003e"}

{"id":420722901019,"title":"K\u0026N High Flow Drop in Filter - Suzuki - Swift Sport ZC31S","handle":"high-flow-drop-in-filter-zc31s-33-2826","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: K\u0026amp;N\u003cbr\u003eReference Number: 33-2826\u003cbr\u003eIntake Type: Drop In Filter\u003cbr\u003e\u003cbr\u003eK\u0026amp;N High flow drop in Filter are perfect for a performance bump or simply oem replacement:\u003cbr\u003eHigh Air Flow with Excellent Filtration\u003cbr\u003eDesigned to Increase Horsepower and Acceleration\u003cbr\u003eWashable and Reusable\u003cbr\u003eWill NOT Void Vehicle Warranty\u003cbr\u003eLasts up to 50,000 miles before cleaning is required depending on driving conditions\u003cbr\u003eK\u0026amp;N Million Mile Limited Warranty\u003cbr\u003eEmissions Legal in all 50 US States.\u003cbr\u003eEconomical, a K\u0026amp;N Air Filter Will Last the Life of Your Automobile\u003cbr\u003eWorks with Original Equipment Manufacturer Vehicle Electronics\u003cbr\u003eEasy High Performance Add-on\u003cbr\u003eEnvironmentally Friendly\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC31S | 2004-2010 | NA | M16A | I4\u003c!--split--\u003e","published_at":"2017-12-09T00:14:19+08:00","created_at":"2017-12-09T00:14:19+08:00","vendor":"K\u0026N","type":"Intake Kits","tags":["2004","2005","2006","2007","2008","2009","2010","drop-in-filter","intake","intake-kits","k-n","suzuki","swift-sport-zc31s-2004-2010-na-m16a-i4","us1","ws18"],"price":5612,"price_min":5612,"price_max":5612,"available":true,"price_varies":false,"compare_at_price":6100,"compare_at_price_min":6100,"compare_at_price_max":6100,"compare_at_price_varies":false,"variants":[{"id":5119526109211,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"33-2826","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"K\u0026N High Flow Drop in Filter - Suzuki - Swift Sport ZC31S","public_title":null,"options":["Default Title"],"price":5612,"weight":2500,"compare_at_price":6100,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/33-5044_12a893c4-026d-4779-971d-31026ba1696f.jpg?v=1710151600"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/33-5044_12a893c4-026d-4779-971d-31026ba1696f.jpg?v=1710151600","options":["Title"],"media":[{"alt":"High Flow Drop in Filter - ZC31S - 33-2826","id":25426649317558,"position":1,"preview_image":{"aspect_ratio":1.498,"height":534,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/33-5044_12a893c4-026d-4779-971d-31026ba1696f.jpg?v=1710151600"},"aspect_ratio":1.498,"height":534,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/33-5044_12a893c4-026d-4779-971d-31026ba1696f.jpg?v=1710151600","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: K\u0026amp;N\u003cbr\u003eReference Number: 33-2826\u003cbr\u003eIntake Type: Drop In Filter\u003cbr\u003e\u003cbr\u003eK\u0026amp;N High flow drop in Filter are perfect for a performance bump or simply oem replacement:\u003cbr\u003eHigh Air Flow with Excellent Filtration\u003cbr\u003eDesigned to Increase Horsepower and Acceleration\u003cbr\u003eWashable and Reusable\u003cbr\u003eWill NOT Void Vehicle Warranty\u003cbr\u003eLasts up to 50,000 miles before cleaning is required depending on driving conditions\u003cbr\u003eK\u0026amp;N Million Mile Limited Warranty\u003cbr\u003eEmissions Legal in all 50 US States.\u003cbr\u003eEconomical, a K\u0026amp;N Air Filter Will Last the Life of Your Automobile\u003cbr\u003eWorks with Original Equipment Manufacturer Vehicle Electronics\u003cbr\u003eEasy High Performance Add-on\u003cbr\u003eEnvironmentally Friendly\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC31S | 2004-2010 | NA | M16A | I4\u003c!--split--\u003e"}

{"id":420722966555,"title":"K\u0026N High Flow Drop in Filter - Suzuki - Swift Sport ZC32S","handle":"high-flow-drop-in-filter-zc32s-33-2826","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: K\u0026amp;N\u003cbr\u003eReference Number: 33-2826\u003cbr\u003eIntake Type: Drop In Filter\u003cbr\u003e\u003cbr\u003eK\u0026amp;N High flow drop in Filter are perfect for a performance bump or simply oem replacement:\u003cbr\u003eHigh Air Flow with Excellent Filtration\u003cbr\u003eDesigned to Increase Horsepower and Acceleration\u003cbr\u003eWashable and Reusable\u003cbr\u003eWill NOT Void Vehicle Warranty\u003cbr\u003eLasts up to 50,000 miles before cleaning is required depending on driving conditions\u003cbr\u003eK\u0026amp;N Million Mile Limited Warranty\u003cbr\u003eEmissions Legal in all 50 US States.\u003cbr\u003eEconomical, a K\u0026amp;N Air Filter Will Last the Life of Your Automobile\u003cbr\u003eWorks with Original Equipment Manufacturer Vehicle Electronics\u003cbr\u003eEasy High Performance Add-on\u003cbr\u003eEnvironmentally Friendly\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC32S | 2010-2017 | NA | M16A | I4\u003c!--split--\u003e","published_at":"2017-12-09T00:14:20+08:00","created_at":"2017-12-09T00:14:20+08:00","vendor":"K\u0026N","type":"Intake Kits","tags":["2010","2011","2012","2013","2014","2015","2016","2017","drop-in-filter","intake","intake-kits","k-n","suzuki","swift-sport-zc32s-2010-2017-na-m16a-i4","us1","ws18"],"price":5612,"price_min":5612,"price_max":5612,"available":true,"price_varies":false,"compare_at_price":6100,"compare_at_price_min":6100,"compare_at_price_max":6100,"compare_at_price_varies":false,"variants":[{"id":5119526207515,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"33-2826","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"K\u0026N High Flow Drop in Filter - Suzuki - Swift Sport ZC32S","public_title":null,"options":["Default Title"],"price":5612,"weight":2500,"compare_at_price":6100,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/33-5044_4d65c451-566d-4af5-be90-2f150b8a2676.jpg?v=1710151599"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/33-5044_4d65c451-566d-4af5-be90-2f150b8a2676.jpg?v=1710151599","options":["Title"],"media":[{"alt":"High Flow Drop in Filter - ZC32S - 33-2826","id":25426649350326,"position":1,"preview_image":{"aspect_ratio":1.498,"height":534,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/33-5044_4d65c451-566d-4af5-be90-2f150b8a2676.jpg?v=1710151599"},"aspect_ratio":1.498,"height":534,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/33-5044_4d65c451-566d-4af5-be90-2f150b8a2676.jpg?v=1710151599","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: K\u0026amp;N\u003cbr\u003eReference Number: 33-2826\u003cbr\u003eIntake Type: Drop In Filter\u003cbr\u003e\u003cbr\u003eK\u0026amp;N High flow drop in Filter are perfect for a performance bump or simply oem replacement:\u003cbr\u003eHigh Air Flow with Excellent Filtration\u003cbr\u003eDesigned to Increase Horsepower and Acceleration\u003cbr\u003eWashable and Reusable\u003cbr\u003eWill NOT Void Vehicle Warranty\u003cbr\u003eLasts up to 50,000 miles before cleaning is required depending on driving conditions\u003cbr\u003eK\u0026amp;N Million Mile Limited Warranty\u003cbr\u003eEmissions Legal in all 50 US States.\u003cbr\u003eEconomical, a K\u0026amp;N Air Filter Will Last the Life of Your Automobile\u003cbr\u003eWorks with Original Equipment Manufacturer Vehicle Electronics\u003cbr\u003eEasy High Performance Add-on\u003cbr\u003eEnvironmentally Friendly\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC32S | 2010-2017 | NA | M16A | I4\u003c!--split--\u003e"}

{"id":420722999323,"title":"K\u0026N High Flow Drop in Filter - Suzuki - Swift ZC21S","handle":"high-flow-drop-in-filter-zc21s-33-2826","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: K\u0026amp;N\u003cbr\u003eReference Number: 33-2826\u003cbr\u003eIntake Type: Drop In Filter\u003cbr\u003e\u003cbr\u003eK\u0026amp;N High flow drop in Filter are perfect for a performance bump or simply oem replacement:\u003cbr\u003eHigh Air Flow with Excellent Filtration\u003cbr\u003eDesigned to Increase Horsepower and Acceleration\u003cbr\u003eWashable and Reusable\u003cbr\u003eWill NOT Void Vehicle Warranty\u003cbr\u003eLasts up to 50,000 miles before cleaning is required depending on driving conditions\u003cbr\u003eK\u0026amp;N Million Mile Limited Warranty\u003cbr\u003eEmissions Legal in all 50 US States.\u003cbr\u003eEconomical, a K\u0026amp;N Air Filter Will Last the Life of Your Automobile\u003cbr\u003eWorks with Original Equipment Manufacturer Vehicle Electronics\u003cbr\u003eEasy High Performance Add-on\u003cbr\u003eEnvironmentally Friendly\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSwift | ZC21S | 2004-2010 | NA | M15A | I4\u003c!--split--\u003e","published_at":"2017-12-09T00:14:20+08:00","created_at":"2017-12-09T00:14:20+08:00","vendor":"K\u0026N","type":"Intake Kits","tags":["2004","2005","2006","2007","2008","2009","2010","drop-in-filter","intake","intake-kits","k-n","suzuki","swift-zc21s-2004-2010-na-m15a-i4","us1","ws18"],"price":5612,"price_min":5612,"price_max":5612,"available":true,"price_varies":false,"compare_at_price":6100,"compare_at_price_min":6100,"compare_at_price_max":6100,"compare_at_price_varies":false,"variants":[{"id":5119526240283,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"33-2826","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"K\u0026N High Flow Drop in Filter - Suzuki - Swift ZC21S","public_title":null,"options":["Default Title"],"price":5612,"weight":2500,"compare_at_price":6100,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/33-5044_965dca37-c821-4012-9566-11127aecbbc7.jpg?v=1710151599"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/33-5044_965dca37-c821-4012-9566-11127aecbbc7.jpg?v=1710151599","options":["Title"],"media":[{"alt":"High Flow Drop in Filter - ZC21S - 33-2826","id":25426649678006,"position":1,"preview_image":{"aspect_ratio":1.498,"height":534,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/33-5044_965dca37-c821-4012-9566-11127aecbbc7.jpg?v=1710151599"},"aspect_ratio":1.498,"height":534,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/33-5044_965dca37-c821-4012-9566-11127aecbbc7.jpg?v=1710151599","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: K\u0026amp;N\u003cbr\u003eReference Number: 33-2826\u003cbr\u003eIntake Type: Drop In Filter\u003cbr\u003e\u003cbr\u003eK\u0026amp;N High flow drop in Filter are perfect for a performance bump or simply oem replacement:\u003cbr\u003eHigh Air Flow with Excellent Filtration\u003cbr\u003eDesigned to Increase Horsepower and Acceleration\u003cbr\u003eWashable and Reusable\u003cbr\u003eWill NOT Void Vehicle Warranty\u003cbr\u003eLasts up to 50,000 miles before cleaning is required depending on driving conditions\u003cbr\u003eK\u0026amp;N Million Mile Limited Warranty\u003cbr\u003eEmissions Legal in all 50 US States.\u003cbr\u003eEconomical, a K\u0026amp;N Air Filter Will Last the Life of Your Automobile\u003cbr\u003eWorks with Original Equipment Manufacturer Vehicle Electronics\u003cbr\u003eEasy High Performance Add-on\u003cbr\u003eEnvironmentally Friendly\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSwift | ZC21S | 2004-2010 | NA | M15A | I4\u003c!--split--\u003e"}

{"id":420722802715,"title":"K\u0026N High Flow Drop in Filter - Toyota - C-HR NGX50","handle":"high-flow-drop-in-filter-ngx50-33-3080","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: K\u0026amp;N\u003cbr\u003eReference Number: 33-3080\u003cbr\u003eIntake Type: Drop In Filter\u003cbr\u003e\u003cbr\u003eK\u0026amp;N High flow drop in Filter are perfect for a performance bump or simply oem replacement:\u003cbr\u003eHigh Air Flow with Excellent Filtration\u003cbr\u003eDesigned to Increase Horsepower and Acceleration\u003cbr\u003eWashable and Reusable\u003cbr\u003eWill NOT Void Vehicle Warranty\u003cbr\u003eLasts up to 50,000 miles before cleaning is required depending on driving conditions\u003cbr\u003eK\u0026amp;N Million Mile Limited Warranty\u003cbr\u003eEmissions Legal in all 50 US States.\u003cbr\u003eEconomical, a K\u0026amp;N Air Filter Will Last the Life of Your Automobile\u003cbr\u003eWorks with Original Equipment Manufacturer Vehicle Electronics\u003cbr\u003eEasy High Performance Add-on\u003cbr\u003eEnvironmentally Friendly\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eC-HR | NGX50 | 2016-2018 | TC | 8NR-FTS | I4\u003c!--split--\u003e","published_at":"2017-12-09T00:14:18+08:00","created_at":"2017-12-09T00:14:18+08:00","vendor":"K\u0026N","type":"Intake Kits","tags":["2016","2017","2018","c-hr-ngx50-2016-2018-tc-8nr-fts-i4","drop-in-filter","intake","intake-kits","k-n","toyota","us1","ws17"],"price":7533,"price_min":7533,"price_max":7533,"available":true,"price_varies":false,"compare_at_price":8100,"compare_at_price_min":8100,"compare_at_price_max":8100,"compare_at_price_varies":false,"variants":[{"id":5119526010907,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"33-3080","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"K\u0026N High Flow Drop in Filter - Toyota - C-HR NGX50","public_title":null,"options":["Default Title"],"price":7533,"weight":2500,"compare_at_price":8100,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/33-5044_c939e961-0bfa-466a-ac70-b7bc900a9d4c.jpg?v=1710151590"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/33-5044_c939e961-0bfa-466a-ac70-b7bc900a9d4c.jpg?v=1710151590","options":["Title"],"media":[{"alt":"High Flow Drop in Filter - NGX50 - 33-3080","id":25426649153718,"position":1,"preview_image":{"aspect_ratio":1.498,"height":534,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/33-5044_c939e961-0bfa-466a-ac70-b7bc900a9d4c.jpg?v=1710151590"},"aspect_ratio":1.498,"height":534,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/33-5044_c939e961-0bfa-466a-ac70-b7bc900a9d4c.jpg?v=1710151590","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: K\u0026amp;N\u003cbr\u003eReference Number: 33-3080\u003cbr\u003eIntake Type: Drop In Filter\u003cbr\u003e\u003cbr\u003eK\u0026amp;N High flow drop in Filter are perfect for a performance bump or simply oem replacement:\u003cbr\u003eHigh Air Flow with Excellent Filtration\u003cbr\u003eDesigned to Increase Horsepower and Acceleration\u003cbr\u003eWashable and Reusable\u003cbr\u003eWill NOT Void Vehicle Warranty\u003cbr\u003eLasts up to 50,000 miles before cleaning is required depending on driving conditions\u003cbr\u003eK\u0026amp;N Million Mile Limited Warranty\u003cbr\u003eEmissions Legal in all 50 US States.\u003cbr\u003eEconomical, a K\u0026amp;N Air Filter Will Last the Life of Your Automobile\u003cbr\u003eWorks with Original Equipment Manufacturer Vehicle Electronics\u003cbr\u003eEasy High Performance Add-on\u003cbr\u003eEnvironmentally Friendly\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eC-HR | NGX50 | 2016-2018 | TC | 8NR-FTS | I4\u003c!--split--\u003e"}

{"id":420722835483,"title":"K\u0026N High Flow Drop in Filter - Toyota - C-HR ZYX10","handle":"high-flow-drop-in-filter-zyx10-33-2485","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: K\u0026amp;N\u003cbr\u003eReference Number: 33-2485\u003cbr\u003eIntake Type: Drop In Filter\u003cbr\u003e\u003cbr\u003eK\u0026amp;N High flow drop in Filter are perfect for a performance bump or simply oem replacement:\u003cbr\u003eHigh Air Flow with Excellent Filtration\u003cbr\u003eDesigned to Increase Horsepower and Acceleration\u003cbr\u003eWashable and Reusable\u003cbr\u003eWill NOT Void Vehicle Warranty\u003cbr\u003eLasts up to 50,000 miles before cleaning is required depending on driving conditions\u003cbr\u003eK\u0026amp;N Million Mile Limited Warranty\u003cbr\u003eEmissions Legal in all 50 US States.\u003cbr\u003eEconomical, a K\u0026amp;N Air Filter Will Last the Life of Your Automobile\u003cbr\u003eWorks with Original Equipment Manufacturer Vehicle Electronics\u003cbr\u003eEasy High Performance Add-on\u003cbr\u003eEnvironmentally Friendly\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eC-HR | ZYX10 | 2016-2018 | NA | 2ZR-FE | I4\u003c!--split--\u003e","published_at":"2017-12-09T00:14:18+08:00","created_at":"2017-12-09T00:14:19+08:00","vendor":"K\u0026N","type":"Intake Kits","tags":["2016","2017","2018","c-hr-zyx10-2016-2018-na-2zr-fe-i4","drop-in-filter","intake","intake-kits","k-n","toyota","us1","ws17"],"price":7533,"price_min":7533,"price_max":7533,"available":true,"price_varies":false,"compare_at_price":8100,"compare_at_price_min":8100,"compare_at_price_max":8100,"compare_at_price_varies":false,"variants":[{"id":5119526043675,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"33-2485","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"K\u0026N High Flow Drop in Filter - Toyota - C-HR ZYX10","public_title":null,"options":["Default Title"],"price":7533,"weight":2500,"compare_at_price":8100,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/33-5044_f2841583-1805-41de-8806-3f01c44e0825.jpg?v=1710151590"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/33-5044_f2841583-1805-41de-8806-3f01c44e0825.jpg?v=1710151590","options":["Title"],"media":[{"alt":"High Flow Drop in Filter - ZYX10 - 33-2485","id":25426649219254,"position":1,"preview_image":{"aspect_ratio":1.498,"height":534,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/33-5044_f2841583-1805-41de-8806-3f01c44e0825.jpg?v=1710151590"},"aspect_ratio":1.498,"height":534,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/33-5044_f2841583-1805-41de-8806-3f01c44e0825.jpg?v=1710151590","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: K\u0026amp;N\u003cbr\u003eReference Number: 33-2485\u003cbr\u003eIntake Type: Drop In Filter\u003cbr\u003e\u003cbr\u003eK\u0026amp;N High flow drop in Filter are perfect for a performance bump or simply oem replacement:\u003cbr\u003eHigh Air Flow with Excellent Filtration\u003cbr\u003eDesigned to Increase Horsepower and Acceleration\u003cbr\u003eWashable and Reusable\u003cbr\u003eWill NOT Void Vehicle Warranty\u003cbr\u003eLasts up to 50,000 miles before cleaning is required depending on driving conditions\u003cbr\u003eK\u0026amp;N Million Mile Limited Warranty\u003cbr\u003eEmissions Legal in all 50 US States.\u003cbr\u003eEconomical, a K\u0026amp;N Air Filter Will Last the Life of Your Automobile\u003cbr\u003eWorks with Original Equipment Manufacturer Vehicle Electronics\u003cbr\u003eEasy High Performance Add-on\u003cbr\u003eEnvironmentally Friendly\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eC-HR | ZYX10 | 2016-2018 | NA | 2ZR-FE | I4\u003c!--split--\u003e"}

{"id":7364666917046,"title":"K-Tuned - 72mm Cast Throttle Body\nDual PRB\/RBC Bolt Pattern - Honda K Series","handle":"k-tuned-72mm-cast-throttle-body-dual-prb-rbc-bolt-pattern-honda-k-series-ktd-72k-db2","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: K-Tuned\u003cbr\u003eReference Number: KTD-72K-DB2\u003cbr\u003eThrottle Body Diameter: 72mm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eApplications:\u003cbr\u003e\n\nDual bolt pattern PRB\/PRC and RBC\/RRC intake manifold\u003cbr\u003e\u003cbr\u003e\nNote:\u003cbr\u003e\n*TPS 02-06 RSX Type S \/ Type R And EP3\u003cbr\u003e\n*IACV 02-06 RSX Type S and EP3\u003cbr\u003e\u003cbr\u003e\n* Gasket and all hardware included\u003cbr\u003e\nOur cast throttle body is designed to be a great budget option for someone looking for a throttle body larger than stock. Direct fit for PRB\/PRC and RBC\/RRC manifolds. This will require engine management of some sort like K-Pro since there is no EVAP port.\u003cbr\u003e\u003cbr\u003e\n\nFeatures:\u003cbr\u003e\n\nDual Bolt Pattern PRB\/PRC and RBC\/RRC\u003cbr\u003e\n72mm bore\u003cbr\u003e\nTPS and IACV Provisions\u003cbr\u003e\nThrottle bracket included\u003cbr\u003e\nIACV can be plugged with supplied 1\/8NPT Plugs (No block off required)\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R Euro | FN2R | 2009-2012 | NA | K20A | I4\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003cbr\u003eCivic Type R | FD2R | 2007-2010 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Zenki | 2002-2004 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Kouki | 2004-2006 | NA | K20A | I4\u003cbr\u003eIntegra | DC5 | 2002-2006 | NA | K20Z1 | I4\u003cbr\u003eAccord Euro R | CL7 | 2002-2008 | NA | K20A | I4\u003cbr\u003eAccord | CL9 | 2002-2008 | NA | K24A3 | I4\u003c!--split--\u003e","published_at":"2022-06-10T11:28:51+08:00","created_at":"2022-06-10T11:25:52+08:00","vendor":"K-Tuned","type":"Throttle Bodies","tags":["2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","accord-cl9-2002-2008-na-k24a3-i4","accord-euro-r-cl7-2002-2008-na-k20a-i4","civic-type-r-ep3-2001-2005-na-k20a-i4","civic-type-r-euro-fn2r-2009-2012-na-k20a-i4","civic-type-r-fd2r-2007-2010-na-k20a-i4","honda","intake","integra-dc5-2002-2006-na-k20z1-i4","integra-type-r-dc5r-kouki-2004-2006-na-k20a-i4","integra-type-r-dc5r-zenki-2002-2004-na-k20a-i4","k-tuned","throttle-bodies","us1","ws18"],"price":24288,"price_min":24288,"price_max":24288,"available":true,"price_varies":false,"compare_at_price":26400,"compare_at_price_min":26400,"compare_at_price_max":26400,"compare_at_price_varies":false,"variants":[{"id":41537213825206,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"KTD-72K-DB2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"K-Tuned - 72mm Cast Throttle Body\nDual PRB\/RBC Bolt Pattern - Honda K Series","public_title":null,"options":["Default Title"],"price":24288,"weight":3000,"compare_at_price":26400,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/k-tuned-72mm-cast-throttle-body-dual-prbrbc-bolt-pattern-honda-k-series-rzcrew.jpg?v=1710320625"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/k-tuned-72mm-cast-throttle-body-dual-prbrbc-bolt-pattern-honda-k-series-rzcrew.jpg?v=1710320625","options":["Title"],"media":[{"alt":"K-Tuned - 72mm Cast Throttle Body\nDual PRB\/RBC Bolt Pattern - Honda K Series KTD-72K-DB2","id":25426642043062,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/k-tuned-72mm-cast-throttle-body-dual-prbrbc-bolt-pattern-honda-k-series-rzcrew.jpg?v=1710320625"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/k-tuned-72mm-cast-throttle-body-dual-prbrbc-bolt-pattern-honda-k-series-rzcrew.jpg?v=1710320625","width":1600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: K-Tuned\u003cbr\u003eReference Number: KTD-72K-DB2\u003cbr\u003eThrottle Body Diameter: 72mm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eApplications:\u003cbr\u003e\n\nDual bolt pattern PRB\/PRC and RBC\/RRC intake manifold\u003cbr\u003e\u003cbr\u003e\nNote:\u003cbr\u003e\n*TPS 02-06 RSX Type S \/ Type R And EP3\u003cbr\u003e\n*IACV 02-06 RSX Type S and EP3\u003cbr\u003e\u003cbr\u003e\n* Gasket and all hardware included\u003cbr\u003e\nOur cast throttle body is designed to be a great budget option for someone looking for a throttle body larger than stock. Direct fit for PRB\/PRC and RBC\/RRC manifolds. This will require engine management of some sort like K-Pro since there is no EVAP port.\u003cbr\u003e\u003cbr\u003e\n\nFeatures:\u003cbr\u003e\n\nDual Bolt Pattern PRB\/PRC and RBC\/RRC\u003cbr\u003e\n72mm bore\u003cbr\u003e\nTPS and IACV Provisions\u003cbr\u003e\nThrottle bracket included\u003cbr\u003e\nIACV can be plugged with supplied 1\/8NPT Plugs (No block off required)\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R Euro | FN2R | 2009-2012 | NA | K20A | I4\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003cbr\u003eCivic Type R | FD2R | 2007-2010 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Zenki | 2002-2004 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Kouki | 2004-2006 | NA | K20A | I4\u003cbr\u003eIntegra | DC5 | 2002-2006 | NA | K20Z1 | I4\u003cbr\u003eAccord Euro R | CL7 | 2002-2008 | NA | K20A | I4\u003cbr\u003eAccord | CL9 | 2002-2008 | NA | K24A3 | I4\u003c!--split--\u003e"}

{"id":7364723278006,"title":"K-Tuned - 72mm Drive By Wire Throttle Body - Honda Civic Type R Euro FN2R","handle":"k-tuned-72mm-drive-by-wire-throttle-body-honda-civic-type-r-euro-fn2r-ktd-72d-rbc","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: K-Tuned\u003cbr\u003eReference Number: KTD-72D-RBC\u003cbr\u003eThrottle Body Diameter: 72mm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eOur 72mm Drive By Wire Throttle Body is direct bolt on to RBC\/RRC manifolds and others with the same bolt pattern. It is a true 72mm bore which is larger than ZDX throttle at the butterfly. This throttle body requires some form of engine management (Flashpro) to properly manage the increased airflow. We used the stock configuration and design using an OEM connector to avoid jumper harness. This gives it an almost OEM look when installed. Inside you will see the machined 72mm bore and brass butterfly. There are two 1\/8NPT vacuum ports on the bottom which can be used for evap, brake booster, or vacuum reference. Included you will get a thermal gasket, mounting bolts, and two 1\/8NPT plugs.\u003cbr\u003e\u003cbr\u003e\n\nThe inlet will use a 3\" silicone coupler. You may need to change the coupler to match your intake.\u003cbr\u003e\u003cbr\u003e\n\nHow big is 72mm TB? We did some measurements and compared it to other stock and common options. We measured the area at the smallest opening since this would be the bottle neck in the system.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R Euro | FN2R | 2009-2012 | NA | K20A | I4\u003c!--split--\u003e","published_at":"2022-06-10T14:28:02+08:00","created_at":"2022-06-10T14:23:41+08:00","vendor":"K-Tuned","type":"Throttle Bodies","tags":["2009","2010","2011","2012","civic-type-r-euro-fn2r-2009-2012-na-k20a-i4","honda","intake","k-tuned","throttle-bodies","us1","ws18"],"price":47288,"price_min":47288,"price_max":47288,"available":true,"price_varies":false,"compare_at_price":51400,"compare_at_price_min":51400,"compare_at_price_max":51400,"compare_at_price_varies":false,"variants":[{"id":41537504673974,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"KTD-72D-RBC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"K-Tuned - 72mm Drive By Wire Throttle Body - Honda Civic Type R Euro FN2R","public_title":null,"options":["Default Title"],"price":47288,"weight":3000,"compare_at_price":51400,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/k-tuned-72mm-drive-by-wire-throttle-body-honda-civic-type-r-euro-fn2r-rzcrew.jpg?v=1710320620"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/k-tuned-72mm-drive-by-wire-throttle-body-honda-civic-type-r-euro-fn2r-rzcrew.jpg?v=1710320620","options":["Title"],"media":[{"alt":"K-Tuned - 72mm Drive By Wire Throttle Body - Honda Civic Type R Euro FN2R KTD-72D-RBC","id":25426642305206,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/k-tuned-72mm-drive-by-wire-throttle-body-honda-civic-type-r-euro-fn2r-rzcrew.jpg?v=1710320620"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/k-tuned-72mm-drive-by-wire-throttle-body-honda-civic-type-r-euro-fn2r-rzcrew.jpg?v=1710320620","width":1600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: K-Tuned\u003cbr\u003eReference Number: KTD-72D-RBC\u003cbr\u003eThrottle Body Diameter: 72mm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eOur 72mm Drive By Wire Throttle Body is direct bolt on to RBC\/RRC manifolds and others with the same bolt pattern. It is a true 72mm bore which is larger than ZDX throttle at the butterfly. This throttle body requires some form of engine management (Flashpro) to properly manage the increased airflow. We used the stock configuration and design using an OEM connector to avoid jumper harness. This gives it an almost OEM look when installed. Inside you will see the machined 72mm bore and brass butterfly. There are two 1\/8NPT vacuum ports on the bottom which can be used for evap, brake booster, or vacuum reference. Included you will get a thermal gasket, mounting bolts, and two 1\/8NPT plugs.\u003cbr\u003e\u003cbr\u003e\n\nThe inlet will use a 3\" silicone coupler. You may need to change the coupler to match your intake.\u003cbr\u003e\u003cbr\u003e\n\nHow big is 72mm TB? We did some measurements and compared it to other stock and common options. We measured the area at the smallest opening since this would be the bottle neck in the system.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R Euro | FN2R | 2009-2012 | NA | K20A | I4\u003c!--split--\u003e"}

{"id":7364723245238,"title":"K-Tuned - 72mm Drive By Wire Throttle Body - Honda Civic Type R FD2R","handle":"k-tuned-72mm-drive-by-wire-throttle-body-honda-civic-type-r-fd2r-ktd-72d-rbc","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: K-Tuned\u003cbr\u003eReference Number: KTD-72D-RBC\u003cbr\u003eThrottle Body Diameter: 72mm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eOur 72mm Drive By Wire Throttle Body is direct bolt on to RBC\/RRC manifolds and others with the same bolt pattern. It is a true 72mm bore which is larger than ZDX throttle at the butterfly. This throttle body requires some form of engine management (Flashpro) to properly manage the increased airflow. We used the stock configuration and design using an OEM connector to avoid jumper harness. This gives it an almost OEM look when installed. Inside you will see the machined 72mm bore and brass butterfly. There are two 1\/8NPT vacuum ports on the bottom which can be used for evap, brake booster, or vacuum reference. Included you will get a thermal gasket, mounting bolts, and two 1\/8NPT plugs.\u003cbr\u003e\u003cbr\u003e\n\nThe inlet will use a 3\" silicone coupler. You may need to change the coupler to match your intake.\u003cbr\u003e\u003cbr\u003e\n\nHow big is 72mm TB? We did some measurements and compared it to other stock and common options. We measured the area at the smallest opening since this would be the bottle neck in the system.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R | FD2R | 2007-2010 | NA | K20A | I4\u003c!--split--\u003e","published_at":"2022-06-10T14:27:58+08:00","created_at":"2022-06-10T14:23:39+08:00","vendor":"K-Tuned","type":"Throttle Bodies","tags":["2007","2008","2009","2010","civic-type-r-fd2r-2007-2010-na-k20a-i4","honda","intake","k-tuned","throttle-bodies","us1","ws18"],"price":47288,"price_min":47288,"price_max":47288,"available":true,"price_varies":false,"compare_at_price":51400,"compare_at_price_min":51400,"compare_at_price_max":51400,"compare_at_price_varies":false,"variants":[{"id":41537504641206,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"KTD-72D-RBC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"K-Tuned - 72mm Drive By Wire Throttle Body - Honda Civic Type R FD2R","public_title":null,"options":["Default Title"],"price":47288,"weight":3000,"compare_at_price":51400,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/k-tuned-72mm-drive-by-wire-throttle-body-honda-civic-type-r-fd2r-rzcrew.jpg?v=1710320620"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/k-tuned-72mm-drive-by-wire-throttle-body-honda-civic-type-r-fd2r-rzcrew.jpg?v=1710320620","options":["Title"],"media":[{"alt":"K-Tuned - 72mm Drive By Wire Throttle Body - Honda Civic Type R FD2R KTD-72D-RBC","id":25426642174134,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/k-tuned-72mm-drive-by-wire-throttle-body-honda-civic-type-r-fd2r-rzcrew.jpg?v=1710320620"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/k-tuned-72mm-drive-by-wire-throttle-body-honda-civic-type-r-fd2r-rzcrew.jpg?v=1710320620","width":1600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: K-Tuned\u003cbr\u003eReference Number: KTD-72D-RBC\u003cbr\u003eThrottle Body Diameter: 72mm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eOur 72mm Drive By Wire Throttle Body is direct bolt on to RBC\/RRC manifolds and others with the same bolt pattern. It is a true 72mm bore which is larger than ZDX throttle at the butterfly. This throttle body requires some form of engine management (Flashpro) to properly manage the increased airflow. We used the stock configuration and design using an OEM connector to avoid jumper harness. This gives it an almost OEM look when installed. Inside you will see the machined 72mm bore and brass butterfly. There are two 1\/8NPT vacuum ports on the bottom which can be used for evap, brake booster, or vacuum reference. Included you will get a thermal gasket, mounting bolts, and two 1\/8NPT plugs.\u003cbr\u003e\u003cbr\u003e\n\nThe inlet will use a 3\" silicone coupler. You may need to change the coupler to match your intake.\u003cbr\u003e\u003cbr\u003e\n\nHow big is 72mm TB? We did some measurements and compared it to other stock and common options. We measured the area at the smallest opening since this would be the bottle neck in the system.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R | FD2R | 2007-2010 | NA | K20A | I4\u003c!--split--\u003e"}

{"id":7364723310774,"title":"K-Tuned - 72mm Drive By Wire Throttle Body - Honda S2000 AP2","handle":"k-tuned-72mm-drive-by-wire-throttle-body-honda-s2000-ap2-ktd-72d-rbc","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: K-Tuned\u003cbr\u003eReference Number: KTD-72D-RBC\u003cbr\u003eThrottle Body Diameter: 72mm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eOur 72mm Drive By Wire Throttle Body is direct bolt on to RBC\/RRC manifolds and others with the same bolt pattern. It is a true 72mm bore which is larger than ZDX throttle at the butterfly. This throttle body requires some form of engine management (Flashpro) to properly manage the increased airflow. We used the stock configuration and design using an OEM connector to avoid jumper harness. This gives it an almost OEM look when installed. Inside you will see the machined 72mm bore and brass butterfly. There are two 1\/8NPT vacuum ports on the bottom which can be used for evap, brake booster, or vacuum reference. Included you will get a thermal gasket, mounting bolts, and two 1\/8NPT plugs.\u003cbr\u003e\u003cbr\u003e\n\nThe inlet will use a 3\" silicone coupler. You may need to change the coupler to match your intake.\u003cbr\u003e\u003cbr\u003e\n\nHow big is 72mm TB? We did some measurements and compared it to other stock and common options. We measured the area at the smallest opening since this would be the bottle neck in the system.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eS2000 | AP2 | 2003-2009 | NA | F22C | I4\u003c!--split--\u003e","published_at":"2022-06-10T14:28:01+08:00","created_at":"2022-06-10T14:23:42+08:00","vendor":"K-Tuned","type":"Throttle Bodies","tags":["2003","2004","2005","2006","2007","2008","2009","honda","intake","k-tuned","s2000-ap2-2003-2009-na-f22c-i4","throttle-bodies","us1","ws18"],"price":47288,"price_min":47288,"price_max":47288,"available":true,"price_varies":false,"compare_at_price":51400,"compare_at_price_min":51400,"compare_at_price_max":51400,"compare_at_price_varies":false,"variants":[{"id":41537504706742,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"KTD-72D-RBC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"K-Tuned - 72mm Drive By Wire Throttle Body - Honda S2000 AP2","public_title":null,"options":["Default Title"],"price":47288,"weight":3000,"compare_at_price":51400,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/k-tuned-72mm-drive-by-wire-throttle-body-honda-s2000-ap2-rzcrew.jpg?v=1710320620"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/k-tuned-72mm-drive-by-wire-throttle-body-honda-s2000-ap2-rzcrew.jpg?v=1710320620","options":["Title"],"media":[{"alt":"K-Tuned - 72mm Drive By Wire Throttle Body - Honda S2000 AP2 KTD-72D-RBC","id":25426642337974,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/k-tuned-72mm-drive-by-wire-throttle-body-honda-s2000-ap2-rzcrew.jpg?v=1710320620"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/k-tuned-72mm-drive-by-wire-throttle-body-honda-s2000-ap2-rzcrew.jpg?v=1710320620","width":1600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: K-Tuned\u003cbr\u003eReference Number: KTD-72D-RBC\u003cbr\u003eThrottle Body Diameter: 72mm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eOur 72mm Drive By Wire Throttle Body is direct bolt on to RBC\/RRC manifolds and others with the same bolt pattern. It is a true 72mm bore which is larger than ZDX throttle at the butterfly. This throttle body requires some form of engine management (Flashpro) to properly manage the increased airflow. We used the stock configuration and design using an OEM connector to avoid jumper harness. This gives it an almost OEM look when installed. Inside you will see the machined 72mm bore and brass butterfly. There are two 1\/8NPT vacuum ports on the bottom which can be used for evap, brake booster, or vacuum reference. Included you will get a thermal gasket, mounting bolts, and two 1\/8NPT plugs.\u003cbr\u003e\u003cbr\u003e\n\nThe inlet will use a 3\" silicone coupler. You may need to change the coupler to match your intake.\u003cbr\u003e\u003cbr\u003e\n\nHow big is 72mm TB? We did some measurements and compared it to other stock and common options. We measured the area at the smallest opening since this would be the bottle neck in the system.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eS2000 | AP2 | 2003-2009 | NA | F22C | I4\u003c!--split--\u003e"}

{"id":7364666851510,"title":"K-Tuned K24 Intake Manifold Adapter - Honda","handle":"k-tuned-k24-intake-manifold-adapter-honda-ktd-k24-im2","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: K-Tuned\u003cbr\u003eReference Number: KTD-K24-IM2\u003cbr\u003eIntake Type: Intake Manifold\u003cbr\u003e\u003cbr\u003eThe K24 Intake Manifold Adapter is a simple and easy way to install K20 style manifold on K24 heads. The recirculation fitting on K24s is typically part of the intake manifold which isn’t on K20 intake manifolds. We have designed the adapter to work with all K24 heads including the K24Z-Series (R40) heads. This can also be used to install K20 manifolds or cut RBC manifolds on 9th gen Civic si as the water bypass is slightly different and you will not need an intake manifold adapter when using the adapter. The adapter lowers intake air temps as coolant is no longer connected the intake manifold. Hondata has shown that intake air density will drop 1% for every 5°F increase in intake temperature. This is wasted power that can easily be gained back by using the adapter. The adapter also features a 1\/8 NPT port for a coolant temp sensor commonly used in swap cars.\n\n\nThe Intake Manifold Adapter can be installed either using our spring loaded tab or by tapping the head. We use Honda Bond or similar gasket maker as it provides a strong seal and when using the spring loaded tab when the adapter isn’t under pressure there will be no chance of leak. The spring loaded tab holds the adapter down with constant spring pressure to ensure a tight fit and seal. The other option is using the provided blind hole you can easily tap the head for the second hole. Tapping the head will require a 6.5mm drill bit (to finish the blind hole in the adapter), 5mm drill bit (to drill the head), and M6x1.0 Tap. \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAccord | CL9 | 2002-2008 | NA | K24A3 | I4\u003c!--split--\u003e","published_at":"2022-06-10T11:28:46+08:00","created_at":"2022-06-10T11:25:50+08:00","vendor":"K-Tuned","type":"Intake Manifolds","tags":["2002","2003","2004","2005","2006","2007","2008","accord-cl9-2002-2008-na-k24a3-i4","honda","intake","intake-manifold","intake-manifolds","k-tuned","manifolds","us1","ws18"],"price":12696,"price_min":12696,"price_max":12696,"available":true,"price_varies":false,"compare_at_price":13800,"compare_at_price_min":13800,"compare_at_price_max":13800,"compare_at_price_varies":false,"variants":[{"id":41537213759670,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"KTD-K24-IM2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"K-Tuned K24 Intake Manifold Adapter - Honda","public_title":null,"options":["Default Title"],"price":12696,"weight":2000,"compare_at_price":13800,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/k-tuned-k24-intake-manifold-adapter-honda-rzcrew.jpg?v=1710320625"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/k-tuned-k24-intake-manifold-adapter-honda-rzcrew.jpg?v=1710320625","options":["Title"],"media":[{"alt":"K-Tuned K24 Intake Manifold Adapter - Honda KTD-K24-IM2","id":25426641977526,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/k-tuned-k24-intake-manifold-adapter-honda-rzcrew.jpg?v=1710320625"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/k-tuned-k24-intake-manifold-adapter-honda-rzcrew.jpg?v=1710320625","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: K-Tuned\u003cbr\u003eReference Number: KTD-K24-IM2\u003cbr\u003eIntake Type: Intake Manifold\u003cbr\u003e\u003cbr\u003eThe K24 Intake Manifold Adapter is a simple and easy way to install K20 style manifold on K24 heads. The recirculation fitting on K24s is typically part of the intake manifold which isn’t on K20 intake manifolds. We have designed the adapter to work with all K24 heads including the K24Z-Series (R40) heads. This can also be used to install K20 manifolds or cut RBC manifolds on 9th gen Civic si as the water bypass is slightly different and you will not need an intake manifold adapter when using the adapter. The adapter lowers intake air temps as coolant is no longer connected the intake manifold. Hondata has shown that intake air density will drop 1% for every 5°F increase in intake temperature. This is wasted power that can easily be gained back by using the adapter. The adapter also features a 1\/8 NPT port for a coolant temp sensor commonly used in swap cars.\n\n\nThe Intake Manifold Adapter can be installed either using our spring loaded tab or by tapping the head. We use Honda Bond or similar gasket maker as it provides a strong seal and when using the spring loaded tab when the adapter isn’t under pressure there will be no chance of leak. The spring loaded tab holds the adapter down with constant spring pressure to ensure a tight fit and seal. The other option is using the provided blind hole you can easily tap the head for the second hole. Tapping the head will require a 6.5mm drill bit (to finish the blind hole in the adapter), 5mm drill bit (to drill the head), and M6x1.0 Tap. \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAccord | CL9 | 2002-2008 | NA | K24A3 | I4\u003c!--split--\u003e"}

{"id":7525634048182,"title":"Magnus - Bosch 82mm Throttle Body Universal Fits Magnus Evo X Intake Manifold","handle":"magnus-bosch-82mm-throttle-body-universal-fits-magnus-evo-x-intake-manifold","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Bosch\u003cbr\u003eReference Number: MMCINT1050\u003cbr\u003eThrottle Body Diameter: 82mm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe Bosch 82mm throttle body is the go to option for a drive by wire setup looking to make big power. At 82mm, this throttle body will give you all the air you need to feed your high performance engine. Cut out engine bay clutter, and just run a few wires to your ECU and have complete control of your throttle. Being a drive by wire unit, this Bosch throttle body will give you complete control over your throttle by giving you the ability to tune your throttle maps when used with the correct ECU. A new unterminated Connector is now included with the each purchase\u003cbr\u003e\u003cbr\u003e\n\nTo be used in conjunction with the Magnus 90mm to Bosch 82mm throttle body adapter (MMCINT1082) when used with Magnus V3, V4, or V5 intake manifolds.\u003cbr\u003e\n\nMagnus 82mm Bosch Throttle Body Hi Boost Inlet Adaptor\u003cbr\u003e\u003cbr\u003e\n\nFeatures:\u003cbr\u003e\n\nDrive by wire\u003cbr\u003e\nLarge 82mm bore for maximum flow\u003cbr\u003e\nAdjustable through ECU\u003cbr\u003e\nConnector included!\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e","published_at":"2022-12-12T15:41:22+08:00","created_at":"2022-12-12T15:37:28+08:00","vendor":"Bosch","type":"Throttle Bodies","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","bosch","intake","lancer-evolution-x-cz4a-chuki-gsr-jdmmr-2008-2009-tc-4b11-i4","lancer-evolution-x-cz4a-chuki-rs-jdmgsr-2008-2009-tc-4b11-i4","lancer-evolution-x-cz4a-kouki-gsr-jdmmr-2009-2017-tc-4b11-i4","lancer-evolution-x-cz4a-kouki-rs-jdmgsr-2009-2017-tc-4b11-i4","lancer-evolution-x-cz4a-zenki-gsr-jdmmr-2007-2008-tc-4b11-i4","lancer-evolution-x-cz4a-zenki-rs-jdmgsr-2007-2008-tc-4b11-i4","mitsubishi","throttle-bodies","us1","ws17"],"price":59892,"price_min":59892,"price_max":59892,"available":true,"price_varies":false,"compare_at_price":64400,"compare_at_price_min":64400,"compare_at_price_max":64400,"compare_at_price_varies":false,"variants":[{"id":42004756529334,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMCINT1050","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Magnus - Bosch 82mm Throttle Body Universal Fits Magnus Evo X Intake Manifold","public_title":null,"options":["Default Title"],"price":59892,"weight":1200,"compare_at_price":64400,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/82mm-bosch-tb-1_bad082fb-4867-41ff-be63-55a8ecb0108f.jpg?v=1729661458"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/82mm-bosch-tb-1_bad082fb-4867-41ff-be63-55a8ecb0108f.jpg?v=1729661458","options":["Title"],"media":[{"alt":"Magnus - Bosch 82mm Throttle Body Universal Fits Magnus Evo X Intake Manifold","id":28685740998838,"position":1,"preview_image":{"aspect_ratio":1.506,"height":664,"width":1000,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/82mm-bosch-tb-1_bad082fb-4867-41ff-be63-55a8ecb0108f.jpg?v=1729661458"},"aspect_ratio":1.506,"height":664,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/82mm-bosch-tb-1_bad082fb-4867-41ff-be63-55a8ecb0108f.jpg?v=1729661458","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Bosch\u003cbr\u003eReference Number: MMCINT1050\u003cbr\u003eThrottle Body Diameter: 82mm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe Bosch 82mm throttle body is the go to option for a drive by wire setup looking to make big power. At 82mm, this throttle body will give you all the air you need to feed your high performance engine. Cut out engine bay clutter, and just run a few wires to your ECU and have complete control of your throttle. Being a drive by wire unit, this Bosch throttle body will give you complete control over your throttle by giving you the ability to tune your throttle maps when used with the correct ECU. A new unterminated Connector is now included with the each purchase\u003cbr\u003e\u003cbr\u003e\n\nTo be used in conjunction with the Magnus 90mm to Bosch 82mm throttle body adapter (MMCINT1082) when used with Magnus V3, V4, or V5 intake manifolds.\u003cbr\u003e\n\nMagnus 82mm Bosch Throttle Body Hi Boost Inlet Adaptor\u003cbr\u003e\u003cbr\u003e\n\nFeatures:\u003cbr\u003e\n\nDrive by wire\u003cbr\u003e\nLarge 82mm bore for maximum flow\u003cbr\u003e\nAdjustable through ECU\u003cbr\u003e\nConnector included!\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e"}

{"id":8096646365366,"title":"Magnus - Sheetmetal Intake Manifold 8 Injector with Bosch 82mm DBW Throttle Body Flange for Mitsubishi Evo X","handle":"magnus-mmcint1070-008","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Magnus\u003cbr\u003eReference Number: MMCINT1070-008\u003cbr\u003eThrottle Body Diameter: 82mm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe same manifold all the worlds fastest EVO X’s use. Used on the 7 second English Racing EVO X. Our experience with intake manifolds dates back to the 90’s. We have dedicated countless hours researching and developing intake manifolds and providing people all around the world with our intakes for the past 17 years. Our experience has given us the knowledge to become one of the leading brands in the industry. With power gains and flow like no other we have set records and set the standard.\u003cbr\u003e\u003cbr\u003e\n\nWe Made it Happen Again\u003cbr\u003e\n\nAfter endless hours dedicated to creating prototypes, testing and perfecting we had reached the results that we were looking for. Our prior intake manifolds have set numerous records world wide with the 4G63 and the 4B11 has not fallen far from the tree. Our intake manifold is currently featured on the worlds fastest Evo X. English Racing has made a 70whp gain on their Evo X with our intake manifold! They’ve run over 80 PSI of boost pressure! 3 versions are available, 4 injector for 68mm or 82mm throttle body and the latest 8 injectors on one plane for 82mm throttle body.\u003cbr\u003e\n\nA Magnus fuel rail is included with every purchase of a manifold\u003cbr\u003e\n\nFactory power steering must be relocated or deleted in order for this manifold to fit.\u003cbr\u003e\n\nManifold comes standard with Bosch 82mm DBW throttle body flange.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eLancer Evolution X | CZ4A Zenki (GSR Jdm\/MR) | 2007-2008 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Chuki (GSR Jdm\/MR) | 2008-2009 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Kouki (GSR Jdm\/MR) | 2009-2017 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Zenki (RS Jdm\/GSR) | 2007-2008 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Chuki (RS Jdm\/GSR) | 2008-2009 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Kouki (RS Jdm\/GSR) | 2009-2017 | TC | 4B11 | I4\u003c!--split--\u003e","published_at":"2024-10-23T13:32:08+08:00","created_at":"2024-10-23T13:30:55+08:00","vendor":"Magnus","type":"Intake Manifolds","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","intake","intake-manifolds","lancer-evolution-x-cz4a-chuki-gsr-jdmmr-2008-2009-tc-4b11-i4","lancer-evolution-x-cz4a-chuki-rs-jdmgsr-2008-2009-tc-4b11-i4","lancer-evolution-x-cz4a-kouki-gsr-jdmmr-2009-2017-tc-4b11-i4","lancer-evolution-x-cz4a-kouki-rs-jdmgsr-2009-2017-tc-4b11-i4","lancer-evolution-x-cz4a-zenki-gsr-jdmmr-2007-2008-tc-4b11-i4","lancer-evolution-x-cz4a-zenki-rs-jdmgsr-2007-2008-tc-4b11-i4","magnus","manifolds","mitsubishi","throttle-bodies","us1","ws18"],"price":258980,"price_min":258980,"price_max":258980,"available":true,"price_varies":false,"compare_at_price":281500,"compare_at_price_min":281500,"compare_at_price_max":281500,"compare_at_price_varies":false,"variants":[{"id":43557431509174,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMCINT1070-008","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Magnus - Sheetmetal Intake Manifold 8 Injector with Bosch 82mm DBW Throttle Body Flange for Mitsubishi Evo X","public_title":null,"options":["Default Title"],"price":258980,"weight":12000,"compare_at_price":281500,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/MMCINT1070-008_3e37db7a-c8e3-4e26-a973-57eb3d874e45.jpg?v=1729661455"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/MMCINT1070-008_3e37db7a-c8e3-4e26-a973-57eb3d874e45.jpg?v=1729661455","options":["Title"],"media":[{"alt":"magnus MMCINT1070-008","id":28685740966070,"position":1,"preview_image":{"aspect_ratio":1.561,"height":492,"width":768,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/MMCINT1070-008_3e37db7a-c8e3-4e26-a973-57eb3d874e45.jpg?v=1729661455"},"aspect_ratio":1.561,"height":492,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/MMCINT1070-008_3e37db7a-c8e3-4e26-a973-57eb3d874e45.jpg?v=1729661455","width":768}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Magnus\u003cbr\u003eReference Number: MMCINT1070-008\u003cbr\u003eThrottle Body Diameter: 82mm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe same manifold all the worlds fastest EVO X’s use. Used on the 7 second English Racing EVO X. Our experience with intake manifolds dates back to the 90’s. We have dedicated countless hours researching and developing intake manifolds and providing people all around the world with our intakes for the past 17 years. Our experience has given us the knowledge to become one of the leading brands in the industry. With power gains and flow like no other we have set records and set the standard.\u003cbr\u003e\u003cbr\u003e\n\nWe Made it Happen Again\u003cbr\u003e\n\nAfter endless hours dedicated to creating prototypes, testing and perfecting we had reached the results that we were looking for. Our prior intake manifolds have set numerous records world wide with the 4G63 and the 4B11 has not fallen far from the tree. Our intake manifold is currently featured on the worlds fastest Evo X. English Racing has made a 70whp gain on their Evo X with our intake manifold! They’ve run over 80 PSI of boost pressure! 3 versions are available, 4 injector for 68mm or 82mm throttle body and the latest 8 injectors on one plane for 82mm throttle body.\u003cbr\u003e\n\nA Magnus fuel rail is included with every purchase of a manifold\u003cbr\u003e\n\nFactory power steering must be relocated or deleted in order for this manifold to fit.\u003cbr\u003e\n\nManifold comes standard with Bosch 82mm DBW throttle body flange.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eLancer Evolution X | CZ4A Zenki (GSR Jdm\/MR) | 2007-2008 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Chuki (GSR Jdm\/MR) | 2008-2009 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Kouki (GSR Jdm\/MR) | 2009-2017 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Zenki (RS Jdm\/GSR) | 2007-2008 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Chuki (RS Jdm\/GSR) | 2008-2009 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Kouki (RS Jdm\/GSR) | 2009-2017 | TC | 4B11 | I4\u003c!--split--\u003e"}

{"id":7638771957942,"title":"Mazda OEM - Airbox cowl - Mazda - MX-5 Miata Roadster NCEC","handle":"mazda-oem-airbox-cowl-mazda-mx-5-miata-roadster-ncec-ne57-56-35xa","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mazda OEM\u003cbr\u003eReference Number: NE57-56-35XA\u003cbr\u003eIntake Type: Airbox\u003cbr\u003eIncludes 99940-0801 bolts (x2)\u003cbr\u003e\u003cbr\u003eSome NC has a different Cowl. Change it to Allow the installation of Cusco strut brace 428 540 AT\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMX-5 Miata Roadster | NCEC | 2005-2008 | NA | LF-VE | I4\u003c!--split--\u003e","published_at":"2023-07-27T14:28:41+08:00","created_at":"2023-07-27T14:27:13+08:00","vendor":"Mazda OEM","type":"Intake Kits","tags":["2005","2006","2007","2008","airbox","genuine-mazda-parts","intake","intake-kits","jp1","mazda","mazda-oem","mx-5-miata-roadster-ncec-2005-2008-na-lf-ve-i4","ws119"],"price":7857,"price_min":7857,"price_max":7857,"available":true,"price_varies":false,"compare_at_price":9700,"compare_at_price_min":9700,"compare_at_price_max":9700,"compare_at_price_varies":false,"variants":[{"id":42324159332534,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"NE57-56-35XA","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mazda OEM - Airbox cowl - Mazda - MX-5 Miata Roadster NCEC","public_title":null,"options":["Default Title"],"price":7857,"weight":8000,"compare_at_price":9700,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/mazda-oem-airbox-cowl-mazda-mx-5-miata-roadster-ncec-rzcrew.jpg?v=1710316156"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/mazda-oem-airbox-cowl-mazda-mx-5-miata-roadster-ncec-rzcrew.jpg?v=1710316156","options":["Title"],"media":[{"alt":"Mazda OEM - Airbox cowl - Mazda - MX-5 Miata Roadster NCEC - NE57-56-35XA","id":26451987005622,"position":1,"preview_image":{"aspect_ratio":1.0,"height":350,"width":350,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/mazda-oem-airbox-cowl-mazda-mx-5-miata-roadster-ncec-rzcrew.jpg?v=1710316156"},"aspect_ratio":1.0,"height":350,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/mazda-oem-airbox-cowl-mazda-mx-5-miata-roadster-ncec-rzcrew.jpg?v=1710316156","width":350}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mazda OEM\u003cbr\u003eReference Number: NE57-56-35XA\u003cbr\u003eIntake Type: Airbox\u003cbr\u003eIncludes 99940-0801 bolts (x2)\u003cbr\u003e\u003cbr\u003eSome NC has a different Cowl. Change it to Allow the installation of Cusco strut brace 428 540 AT\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMX-5 Miata Roadster | NCEC | 2005-2008 | NA | LF-VE | I4\u003c!--split--\u003e"}

{"id":6963364331702,"title":"Mazda OEM - Airbox cowl - Mazda - MX-5 Miata Roadster RF ND","handle":"mazda-oem-airbox-cowl-mazda-mx-5-miata-roadster-rf-nd-n244-56-35x","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mazda OEM\u003cbr\u003eReference Number: N244 56 35X\u003cbr\u003eIntake Type: Airbox\u003cbr\u003eGain: \u003cbr\u003e\u003cbr\u003eSome ND has a different Cowl. Change it to Allow the installation of Cusco strut brace 429 540 AT and Okuyama carbings ref 642 426 1.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMX-5 Miata Roadster RF | NDERC | 2016-2018 | NA | PE-VPR RS | I4\u003cbr\u003eMX-5 Miata Roadster | ND5RC | 2015-2018 | NA | P5-VP RS | I4\u003c!--split--\u003e","published_at":"2021-08-20T15:14:18+08:00","created_at":"2021-08-20T15:14:19+08:00","vendor":"Mazda OEM","type":"Intake Kits","tags":["2015","2016","2017","2018","airbox","genuine-mazda-parts","intake","intake-kits","jp1","mazda","mazda-oem","mx-5-miata-roadster-nd5rc-2015-2018-na-p5-vp-rs-i4","mx-5-miata-roadster-rf-nderc-2016-2018-na-pe-vpr-rs-i4","ws129"],"price":2769,"price_min":2769,"price_max":2769,"available":true,"price_varies":false,"compare_at_price":3900,"compare_at_price_min":3900,"compare_at_price_max":3900,"compare_at_price_varies":false,"variants":[{"id":40404719632566,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"N244 56 35X","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mazda OEM - Airbox cowl - Mazda - MX-5 Miata Roadster RF ND","public_title":null,"options":["Default Title"],"price":2769,"weight":8000,"compare_at_price":3900,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/mazda-oem-airbox-cowl-mazda-mx-5-miata-roadster-rf-nd-rzcrew.png?v=1710324040"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/mazda-oem-airbox-cowl-mazda-mx-5-miata-roadster-rf-nd-rzcrew.png?v=1710324040","options":["Title"],"media":[{"alt":"Mazda OEM - Airbox cowl - Mazda - MX-5 Miata Roadster RF ND - N244 56 35X","id":25426865586358,"position":1,"preview_image":{"aspect_ratio":2.647,"height":272,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/mazda-oem-airbox-cowl-mazda-mx-5-miata-roadster-rf-nd-rzcrew.png?v=1710324040"},"aspect_ratio":2.647,"height":272,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/mazda-oem-airbox-cowl-mazda-mx-5-miata-roadster-rf-nd-rzcrew.png?v=1710324040","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mazda OEM\u003cbr\u003eReference Number: N244 56 35X\u003cbr\u003eIntake Type: Airbox\u003cbr\u003eGain: \u003cbr\u003e\u003cbr\u003eSome ND has a different Cowl. Change it to Allow the installation of Cusco strut brace 429 540 AT and Okuyama carbings ref 642 426 1.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMX-5 Miata Roadster RF | NDERC | 2016-2018 | NA | PE-VPR RS | I4\u003cbr\u003eMX-5 Miata Roadster | ND5RC | 2015-2018 | NA | P5-VP RS | I4\u003c!--split--\u003e"}

{"id":562001084443,"title":"Mishimoto - BMW E90\/E92 w\/ N52 Engine Silicone Intake Boot - Blue - E82 E88 E90 E91 E92 E93 - MMHOSE-E90-06IHBL","handle":"mishimoto-bmw-e90-e92-w-n52-engine-silicone-intake-boot-blue-e82-e88-e90-e91-e92-e93-mmhose-e90-06ihbl","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-E90-06IHBL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for BMW E90\/E92 and E82\/E88 vehicles with the N52 engine\u003cbr\u003eRemoves the resonator found in the stock intake boot, provides a slight increase in engine tone\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eInstalls in under 1 hour\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eFits with single stage or 3-stage intake manifolds\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eAvailable in blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Intake Hose\u003cbr\u003e(2) Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eLength 7.8\"\u003cbr\u003eThis product will only fit BMW E90 \/ E92 \/ E91 \/ E92 \/ E93 \/ E82 \/ E88 vehicles with the N52 engine\u003cbr\u003eMax Temp 330°F\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto N52 silicone intake boot is constructed of five layers of silicone with steel reinforcement rings for maximum durability. The steel reinforcement rings keep this hose from collapsing when under load, keeping your engine supplied with adequate airflow. The stock N52 intake boot has a resonator that BMW included to keep the N52 quiet. We tossed that resonator to the curb for a nice increase in engine and intake tone. This N52 intake boot fits with the stock airbox and single stage or 3-stage intake manifolds. The silicone construction will provide you with a long service life, and the Mishimoto Lifetime Warranty will make sure your intake boot is always leak free!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for BMW E90\/E92 and E82\/E88 vehicles with the N52 engine\u003cbr\u003eRemoves the resonator found in the stock intake boot, provides a slight increase in engine tone\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eInstalls in under 1 hour\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eFits with single stage or 3-stage intake manifolds\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eAvailable in blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Intake Hose\u003cbr\u003e(2) Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eLength 7.8\"\u003cbr\u003eThis product will only fit BMW E90 \/ E92 \/ E91 \/ E92 \/ E93 \/ E82 \/ E88 vehicles with the N52 engine\u003cbr\u003eMax Temp 330°F\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto N52 silicone intake boot is constructed of five layers of silicone with steel reinforcement rings for maximum durability. The steel reinforcement rings keep this hose from collapsing when under load, keeping your engine supplied with adequate airflow. The stock N52 intake boot has a resonator that BMW included to keep the N52 quiet. We tossed that resonator to the curb for a nice increase in engine and intake tone. This N52 intake boot fits with the stock airbox and single stage or 3-stage intake manifolds. The silicone construction will provide you with a long service life, and the Mishimoto Lifetime Warranty will make sure your intake boot is always leak free!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:26:46+08:00","created_at":"2018-01-24T23:26:46+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["1-series-125i-e82-2008-2011-na-n52b30-i6","1-series-125i-e88-2008-2011-na-n52b30-i6","2004","2005","2006","2007","2008","2009","2010","2011","3-series-cabriolet-e93-2004-2011-na-i6","3-series-coupe-e92-2004-2011-na-i6","3-series-e90-2004-2011-na-i6","3-series-estate-e91-2005-2011-na-i6","bmw","intake","intake-hoses","mishimoto","us1","ws136"],"price":10752,"price_min":10752,"price_max":10752,"available":true,"price_varies":false,"compare_at_price":16800,"compare_at_price_min":16800,"compare_at_price_max":16800,"compare_at_price_varies":false,"variants":[{"id":5990400622619,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-E90-06IHBL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - BMW E90\/E92 w\/ N52 Engine Silicone Intake Boot - Blue - E82 E88 E90 E91 E92 E93 - MMHOSE-E90-06IHBL","public_title":null,"options":["Default Title"],"price":10752,"weight":4499,"compare_at_price":16800,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-E90-06IHBL.jpg?v=1710154181"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-E90-06IHBL.jpg?v=1710154181","options":["Title"],"media":[{"alt":"Mishimoto - BMW E90\/E92 w\/ N52 Engine Silicone Intake Boot - Blue - E82 E88 E90 E91 E92 E93 - MMHOSE-E90-06IHBL - Rzcrewgarage","id":1351405633633,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-E90-06IHBL.jpg?v=1710154181"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-E90-06IHBL.jpg?v=1710154181","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-E90-06IHBL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for BMW E90\/E92 and E82\/E88 vehicles with the N52 engine\u003cbr\u003eRemoves the resonator found in the stock intake boot, provides a slight increase in engine tone\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eInstalls in under 1 hour\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eFits with single stage or 3-stage intake manifolds\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eAvailable in blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Intake Hose\u003cbr\u003e(2) Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eLength 7.8\"\u003cbr\u003eThis product will only fit BMW E90 \/ E92 \/ E91 \/ E92 \/ E93 \/ E82 \/ E88 vehicles with the N52 engine\u003cbr\u003eMax Temp 330°F\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto N52 silicone intake boot is constructed of five layers of silicone with steel reinforcement rings for maximum durability. The steel reinforcement rings keep this hose from collapsing when under load, keeping your engine supplied with adequate airflow. The stock N52 intake boot has a resonator that BMW included to keep the N52 quiet. We tossed that resonator to the curb for a nice increase in engine and intake tone. This N52 intake boot fits with the stock airbox and single stage or 3-stage intake manifolds. The silicone construction will provide you with a long service life, and the Mishimoto Lifetime Warranty will make sure your intake boot is always leak free!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for BMW E90\/E92 and E82\/E88 vehicles with the N52 engine\u003cbr\u003eRemoves the resonator found in the stock intake boot, provides a slight increase in engine tone\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eInstalls in under 1 hour\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eFits with single stage or 3-stage intake manifolds\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eAvailable in blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Intake Hose\u003cbr\u003e(2) Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eLength 7.8\"\u003cbr\u003eThis product will only fit BMW E90 \/ E92 \/ E91 \/ E92 \/ E93 \/ E82 \/ E88 vehicles with the N52 engine\u003cbr\u003eMax Temp 330°F\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto N52 silicone intake boot is constructed of five layers of silicone with steel reinforcement rings for maximum durability. The steel reinforcement rings keep this hose from collapsing when under load, keeping your engine supplied with adequate airflow. The stock N52 intake boot has a resonator that BMW included to keep the N52 quiet. We tossed that resonator to the curb for a nice increase in engine and intake tone. This N52 intake boot fits with the stock airbox and single stage or 3-stage intake manifolds. The silicone construction will provide you with a long service life, and the Mishimoto Lifetime Warranty will make sure your intake boot is always leak free!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":562001117211,"title":"Mishimoto - BMW E90\/E92 w\/ N52 Engine Silicone Intake Boot - Red - E82 E88 E90 E91 E92 E93 - MMHOSE-E90-06IHRD","handle":"mishimoto-bmw-e90-e92-w-n52-engine-silicone-intake-boot-red-e82-e88-e90-e91-e92-e93-mmhose-e90-06ihrd","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-E90-06IHRD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for BMW E90\/E92 and E82\/E88 vehicles with the N52 engine\u003cbr\u003eRemoves the resonator found in the stock intake boot, provides a slight increase in engine tone\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eInstalls in under 1 hour\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eFits with single stage or 3-stage intake manifolds\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eAvailable in blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Intake Hose\u003cbr\u003e(2) Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eLength 7.8\"\u003cbr\u003eThis product will only fit BMW E90 \/ E92 \/ E91 \/ E92 \/ E93 \/ E82 \/ E88 vehicles with the N52 engine\u003cbr\u003eMax Temp 330°F\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto N52 silicone intake boot is constructed of five layers of silicone with steel reinforcement rings for maximum durability. The steel reinforcement rings keep this hose from collapsing when under load, keeping your engine supplied with adequate airflow. The stock N52 intake boot has a resonator that BMW included to keep the N52 quiet. We tossed that resonator to the curb for a nice increase in engine and intake tone. This N52 intake boot fits with the stock airbox and single stage or 3-stage intake manifolds. The silicone construction will provide you with a long service life, and the Mishimoto Lifetime Warranty will make sure your intake boot is always leak free!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for BMW E90\/E92 and E82\/E88 vehicles with the N52 engine\u003cbr\u003eRemoves the resonator found in the stock intake boot, provides a slight increase in engine tone\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eInstalls in under 1 hour\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eFits with single stage or 3-stage intake manifolds\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eAvailable in blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Intake Hose\u003cbr\u003e(2) Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eLength 7.8\"\u003cbr\u003eThis product will only fit BMW E90 \/ E92 \/ E91 \/ E92 \/ E93 \/ E82 \/ E88 vehicles with the N52 engine\u003cbr\u003eMax Temp 330°F\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto N52 silicone intake boot is constructed of five layers of silicone with steel reinforcement rings for maximum durability. The steel reinforcement rings keep this hose from collapsing when under load, keeping your engine supplied with adequate airflow. The stock N52 intake boot has a resonator that BMW included to keep the N52 quiet. We tossed that resonator to the curb for a nice increase in engine and intake tone. This N52 intake boot fits with the stock airbox and single stage or 3-stage intake manifolds. The silicone construction will provide you with a long service life, and the Mishimoto Lifetime Warranty will make sure your intake boot is always leak free!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:26:46+08:00","created_at":"2018-01-24T23:26:47+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["1-series-125i-e82-2008-2011-na-n52b30-i6","1-series-125i-e88-2008-2011-na-n52b30-i6","2004","2005","2006","2007","2008","2009","2010","2011","3-series-cabriolet-e93-2004-2011-na-i6","3-series-coupe-e92-2004-2011-na-i6","3-series-e90-2004-2011-na-i6","3-series-estate-e91-2005-2011-na-i6","bmw","intake","intake-hoses","mishimoto","us1","ws136"],"price":10752,"price_min":10752,"price_max":10752,"available":true,"price_varies":false,"compare_at_price":16800,"compare_at_price_min":16800,"compare_at_price_max":16800,"compare_at_price_varies":false,"variants":[{"id":5990400655387,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-E90-06IHRD","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - BMW E90\/E92 w\/ N52 Engine Silicone Intake Boot - Red - E82 E88 E90 E91 E92 E93 - MMHOSE-E90-06IHRD","public_title":null,"options":["Default Title"],"price":10752,"weight":4499,"compare_at_price":16800,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-E90-06IHRD.jpg?v=1710154181"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-E90-06IHRD.jpg?v=1710154181","options":["Title"],"media":[{"alt":"Mishimoto - BMW E90\/E92 w\/ N52 Engine Silicone Intake Boot - Red - E82 E88 E90 E91 E92 E93 - MMHOSE-E90-06IHRD - Rzcrewgarage","id":1351405666401,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-E90-06IHRD.jpg?v=1710154181"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-E90-06IHRD.jpg?v=1710154181","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-E90-06IHRD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for BMW E90\/E92 and E82\/E88 vehicles with the N52 engine\u003cbr\u003eRemoves the resonator found in the stock intake boot, provides a slight increase in engine tone\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eInstalls in under 1 hour\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eFits with single stage or 3-stage intake manifolds\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eAvailable in blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Intake Hose\u003cbr\u003e(2) Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eLength 7.8\"\u003cbr\u003eThis product will only fit BMW E90 \/ E92 \/ E91 \/ E92 \/ E93 \/ E82 \/ E88 vehicles with the N52 engine\u003cbr\u003eMax Temp 330°F\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto N52 silicone intake boot is constructed of five layers of silicone with steel reinforcement rings for maximum durability. The steel reinforcement rings keep this hose from collapsing when under load, keeping your engine supplied with adequate airflow. The stock N52 intake boot has a resonator that BMW included to keep the N52 quiet. We tossed that resonator to the curb for a nice increase in engine and intake tone. This N52 intake boot fits with the stock airbox and single stage or 3-stage intake manifolds. The silicone construction will provide you with a long service life, and the Mishimoto Lifetime Warranty will make sure your intake boot is always leak free!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for BMW E90\/E92 and E82\/E88 vehicles with the N52 engine\u003cbr\u003eRemoves the resonator found in the stock intake boot, provides a slight increase in engine tone\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eInstalls in under 1 hour\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eFits with single stage or 3-stage intake manifolds\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eAvailable in blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Intake Hose\u003cbr\u003e(2) Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eLength 7.8\"\u003cbr\u003eThis product will only fit BMW E90 \/ E92 \/ E91 \/ E92 \/ E93 \/ E82 \/ E88 vehicles with the N52 engine\u003cbr\u003eMax Temp 330°F\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto N52 silicone intake boot is constructed of five layers of silicone with steel reinforcement rings for maximum durability. The steel reinforcement rings keep this hose from collapsing when under load, keeping your engine supplied with adequate airflow. The stock N52 intake boot has a resonator that BMW included to keep the N52 quiet. We tossed that resonator to the curb for a nice increase in engine and intake tone. This N52 intake boot fits with the stock airbox and single stage or 3-stage intake manifolds. The silicone construction will provide you with a long service life, and the Mishimoto Lifetime Warranty will make sure your intake boot is always leak free!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":562003148827,"title":"Mishimoto - Honda Civic Si Silicone Induction Hose - Black - FD2 FG2 - MMHOSE-CIV-06SIIHBK","handle":"mishimoto-honda-civic-si-silicone-induction-hose-black-fd2-fg2-mmhose-civ-06siihbk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-CIV-06SIIHBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:27:06+08:00","created_at":"2018-01-24T23:27:08+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["2007","2008","2009","2010","civic-fd2-2007-2010-na-k20z2-i4","civic-fg2-2007-2009-na-k20z3-i4","honda","intake","intake-hoses","mishimoto","us1","ws136"],"price":19456,"price_min":19456,"price_max":19456,"available":true,"price_varies":false,"compare_at_price":30400,"compare_at_price_min":30400,"compare_at_price_max":30400,"compare_at_price_varies":false,"variants":[{"id":5990402883611,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-CIV-06SIIHBK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Honda Civic Si Silicone Induction Hose - Black - FD2 FG2 - MMHOSE-CIV-06SIIHBK","public_title":null,"options":["Default Title"],"price":19456,"weight":4771,"compare_at_price":30400,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHBK.jpg?v=1710154197"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHBK.jpg?v=1710154197","options":["Title"],"media":[{"alt":"Mishimoto - Honda Civic Si Silicone Induction Hose - Black - FD2 FG2 - MMHOSE-CIV-06SIIHBK - Rzcrewgarage","id":1351406780513,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHBK.jpg?v=1710154197"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHBK.jpg?v=1710154197","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-CIV-06SIIHBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":562004099099,"title":"Mishimoto - Honda Civic Si Silicone Induction Hose - Blue - FD2 FG2 - MMHOSE-CIV-06SIIHBL","handle":"mishimoto-honda-civic-si-silicone-induction-hose-blue-fd2-fg2-mmhose-civ-06siihbl","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-CIV-06SIIHBL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:27:08+08:00","created_at":"2018-01-24T23:27:09+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["2007","2008","2009","2010","civic-fd2-2007-2010-na-k20z2-i4","civic-fg2-2007-2009-na-k20z3-i4","honda","intake","intake-hoses","mishimoto","us1","ws136"],"price":19456,"price_min":19456,"price_max":19456,"available":true,"price_varies":false,"compare_at_price":30400,"compare_at_price_min":30400,"compare_at_price_max":30400,"compare_at_price_varies":false,"variants":[{"id":5990403801115,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-CIV-06SIIHBL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Honda Civic Si Silicone Induction Hose - Blue - FD2 FG2 - MMHOSE-CIV-06SIIHBL","public_title":null,"options":["Default Title"],"price":19456,"weight":4907,"compare_at_price":30400,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHBL.jpg?v=1710154199"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHBL.jpg?v=1710154199","options":["Title"],"media":[{"alt":"Mishimoto - Honda Civic Si Silicone Induction Hose - Blue - FD2 FG2 - MMHOSE-CIV-06SIIHBL - Rzcrewgarage","id":1351406813281,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHBL.jpg?v=1710154199"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHBL.jpg?v=1710154199","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-CIV-06SIIHBL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":562004131867,"title":"Mishimoto - Honda Civic Si Silicone Induction Hose - Red - FD2 FG2 - MMHOSE-CIV-06SIIHRD","handle":"mishimoto-honda-civic-si-silicone-induction-hose-red-fd2-fg2-mmhose-civ-06siihrd","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-CIV-06SIIHRD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:27:09+08:00","created_at":"2018-01-24T23:27:09+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["2007","2008","2009","2010","civic-fd2-2007-2010-na-k20z2-i4","civic-fg2-2007-2009-na-k20z3-i4","honda","intake","intake-hoses","mishimoto","us1","ws136"],"price":19456,"price_min":19456,"price_max":19456,"available":true,"price_varies":false,"compare_at_price":30400,"compare_at_price_min":30400,"compare_at_price_max":30400,"compare_at_price_varies":false,"variants":[{"id":5990403866651,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-CIV-06SIIHRD","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Honda Civic Si Silicone Induction Hose - Red - FD2 FG2 - MMHOSE-CIV-06SIIHRD","public_title":null,"options":["Default Title"],"price":19456,"weight":5814,"compare_at_price":30400,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHRD.jpg?v=1710154199"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHRD.jpg?v=1710154199","options":["Title"],"media":[{"alt":"Mishimoto - Honda Civic Si Silicone Induction Hose - Red - FD2 FG2 - MMHOSE-CIV-06SIIHRD - Rzcrewgarage","id":1351406878817,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHRD.jpg?v=1710154199"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHRD.jpg?v=1710154199","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-CIV-06SIIHRD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561994072091,"title":"Mishimoto - Mishimoto 3.0\", 90 Degree Coupler - Black - Universal - MMCP-3090BK","handle":"mishimoto-mishimoto-3-0-90-degree-coupler-black-universal-mmcp-3090bk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMCP-3090BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e 100% silicone construction\u003cbr\u003eHeat-resistant embedded fibers\u003cbr\u003eHigh heat and pressure tolerances\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Coupler\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eLength 3\" \u003cbr\u003eThickness 4mm\u003cbr\u003eOuter Diameter 3.4\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eAngle 90°\u003cbr\u003eInner Diameter 3.0\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eAvailable in black, blue, red, purple, green and white. Mishimoto 3.0\" 90 Degree Silicone Coupler.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e 100% silicone construction\u003cbr\u003eHeat-resistant embedded fibers\u003cbr\u003eHigh heat and pressure tolerances\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Coupler\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eLength 3\" \u003cbr\u003eThickness 4mm\u003cbr\u003eOuter Diameter 3.4\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eAngle 90°\u003cbr\u003eInner Diameter 3.0\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eAvailable in black, blue, red, purple, green and white. Mishimoto 3.0\" 90 Degree Silicone Coupler.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:25:40+08:00","created_at":"2018-01-24T23:25:40+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["intake","mishimoto","universal-hoses","us1","ws124"],"price":3116,"price_min":3116,"price_max":3116,"available":true,"price_varies":false,"compare_at_price":4100,"compare_at_price_min":4100,"compare_at_price_max":4100,"compare_at_price_varies":false,"variants":[{"id":5990393118747,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMCP-3090BK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Mishimoto 3.0\", 90 Degree Coupler - Black - Universal - MMCP-3090BK","public_title":null,"options":["Default Title"],"price":3116,"weight":4318,"compare_at_price":4100,"inventory_quantity":16,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMCP-3090BK.jpg?v=1710154126"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMCP-3090BK.jpg?v=1710154126","options":["Title"],"media":[{"alt":"Mishimoto - Mishimoto 3.0\", 90 Degree Coupler - Black - Universal - MMCP-3090BK - Rzcrewgarage","id":1351402520673,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMCP-3090BK.jpg?v=1710154126"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMCP-3090BK.jpg?v=1710154126","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMCP-3090BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e 100% silicone construction\u003cbr\u003eHeat-resistant embedded fibers\u003cbr\u003eHigh heat and pressure tolerances\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Coupler\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eLength 3\" \u003cbr\u003eThickness 4mm\u003cbr\u003eOuter Diameter 3.4\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eAngle 90°\u003cbr\u003eInner Diameter 3.0\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eAvailable in black, blue, red, purple, green and white. Mishimoto 3.0\" 90 Degree Silicone Coupler.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e 100% silicone construction\u003cbr\u003eHeat-resistant embedded fibers\u003cbr\u003eHigh heat and pressure tolerances\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Coupler\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eLength 3\" \u003cbr\u003eThickness 4mm\u003cbr\u003eOuter Diameter 3.4\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eAngle 90°\u003cbr\u003eInner Diameter 3.0\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eAvailable in black, blue, red, purple, green and white. Mishimoto 3.0\" 90 Degree Silicone Coupler.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561995087899,"title":"Mishimoto - Mishimoto 3.0\", 90 Degree Coupler - Blue - Universal - MMCP-3090BL","handle":"mishimoto-mishimoto-3-0-90-degree-coupler-blue-universal-mmcp-3090bl","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMCP-3090BL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e 100% silicone construction\u003cbr\u003eHeat-resistant embedded fibers\u003cbr\u003eHigh heat and pressure tolerances\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Coupler\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eLength 3\" \u003cbr\u003eThickness 4mm\u003cbr\u003eOuter Diameter 3.4\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eAngle 90°\u003cbr\u003eInner Diameter 3.0\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eAvailable in black, blue, red, purple, green and white. Mishimoto 3.0\" 90 Degree Silicone Coupler.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e 100% silicone construction\u003cbr\u003eHeat-resistant embedded fibers\u003cbr\u003eHigh heat and pressure tolerances\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Coupler\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eLength 3\" \u003cbr\u003eThickness 4mm\u003cbr\u003eOuter Diameter 3.4\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eAngle 90°\u003cbr\u003eInner Diameter 3.0\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eAvailable in black, blue, red, purple, green and white. Mishimoto 3.0\" 90 Degree Silicone Coupler.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:25:41+08:00","created_at":"2018-01-24T23:25:41+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["intake","mishimoto","universal-hoses","us1","ws124"],"price":3116,"price_min":3116,"price_max":3116,"available":true,"price_varies":false,"compare_at_price":4100,"compare_at_price_min":4100,"compare_at_price_max":4100,"compare_at_price_varies":false,"variants":[{"id":5990394134555,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMCP-3090BL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Mishimoto 3.0\", 90 Degree Coupler - Blue - Universal - MMCP-3090BL","public_title":null,"options":["Default Title"],"price":3116,"weight":4318,"compare_at_price":4100,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMCP-3090BL.jpg?v=1710154126"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMCP-3090BL.jpg?v=1710154126","options":["Title"],"media":[{"alt":"Mishimoto - Mishimoto 3.0\", 90 Degree Coupler - Blue - Universal - MMCP-3090BL - Rzcrewgarage","id":1351402553441,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMCP-3090BL.jpg?v=1710154126"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMCP-3090BL.jpg?v=1710154126","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMCP-3090BL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e 100% silicone construction\u003cbr\u003eHeat-resistant embedded fibers\u003cbr\u003eHigh heat and pressure tolerances\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Coupler\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eLength 3\" \u003cbr\u003eThickness 4mm\u003cbr\u003eOuter Diameter 3.4\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eAngle 90°\u003cbr\u003eInner Diameter 3.0\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eAvailable in black, blue, red, purple, green and white. Mishimoto 3.0\" 90 Degree Silicone Coupler.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e 100% silicone construction\u003cbr\u003eHeat-resistant embedded fibers\u003cbr\u003eHigh heat and pressure tolerances\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Coupler\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eLength 3\" \u003cbr\u003eThickness 4mm\u003cbr\u003eOuter Diameter 3.4\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eAngle 90°\u003cbr\u003eInner Diameter 3.0\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eAvailable in black, blue, red, purple, green and white. Mishimoto 3.0\" 90 Degree Silicone Coupler.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561995120667,"title":"Mishimoto - Mishimoto 3.0\", 90 Degree Coupler - Red - Universal - MMCP-3090RD","handle":"mishimoto-mishimoto-3-0-90-degree-coupler-red-universal-mmcp-3090rd","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMCP-3090RD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e 100% silicone construction\u003cbr\u003eHeat-resistant embedded fibers\u003cbr\u003eHigh heat and pressure tolerances\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Coupler\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eLength 3\" \u003cbr\u003eThickness 4mm\u003cbr\u003eOuter Diameter 3.4\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eAngle 90°\u003cbr\u003eInner Diameter 3.0\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eAvailable in black, blue, red, purple, green and white. Mishimoto 3.0\" 90 Degree Silicone Coupler.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e 100% silicone construction\u003cbr\u003eHeat-resistant embedded fibers\u003cbr\u003eHigh heat and pressure tolerances\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Coupler\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eLength 3\" \u003cbr\u003eThickness 4mm\u003cbr\u003eOuter Diameter 3.4\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eAngle 90°\u003cbr\u003eInner Diameter 3.0\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eAvailable in black, blue, red, purple, green and white. Mishimoto 3.0\" 90 Degree Silicone Coupler.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:25:41+08:00","created_at":"2018-01-24T23:25:42+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["intake","mishimoto","universal-hoses","us1","ws124"],"price":3116,"price_min":3116,"price_max":3116,"available":true,"price_varies":false,"compare_at_price":4100,"compare_at_price_min":4100,"compare_at_price_max":4100,"compare_at_price_varies":false,"variants":[{"id":5990394167323,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMCP-3090RD","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Mishimoto 3.0\", 90 Degree Coupler - Red - Universal - MMCP-3090RD","public_title":null,"options":["Default Title"],"price":3116,"weight":4363,"compare_at_price":4100,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMCP-3090RD.jpg?v=1710154126"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMCP-3090RD.jpg?v=1710154126","options":["Title"],"media":[{"alt":"Mishimoto - Mishimoto 3.0\", 90 Degree Coupler - Red - Universal - MMCP-3090RD - Rzcrewgarage","id":1351402586209,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMCP-3090RD.jpg?v=1710154126"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMCP-3090RD.jpg?v=1710154126","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMCP-3090RD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e 100% silicone construction\u003cbr\u003eHeat-resistant embedded fibers\u003cbr\u003eHigh heat and pressure tolerances\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Coupler\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eLength 3\" \u003cbr\u003eThickness 4mm\u003cbr\u003eOuter Diameter 3.4\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eAngle 90°\u003cbr\u003eInner Diameter 3.0\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eAvailable in black, blue, red, purple, green and white. Mishimoto 3.0\" 90 Degree Silicone Coupler.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e 100% silicone construction\u003cbr\u003eHeat-resistant embedded fibers\u003cbr\u003eHigh heat and pressure tolerances\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Coupler\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eLength 3\" \u003cbr\u003eThickness 4mm\u003cbr\u003eOuter Diameter 3.4\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eAngle 90°\u003cbr\u003eInner Diameter 3.0\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eAvailable in black, blue, red, purple, green and white. Mishimoto 3.0\" 90 Degree Silicone Coupler.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561995153435,"title":"Mishimoto - Mishimoto Hump Hose Coupler, 2.5\" - Black - Universal - MMCP-2.5HPBK","handle":"mishimoto-mishimoto-hump-hose-coupler-2-5-black-universal-mmcp-2-5hpbk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMCP-2.5HPBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e 100% silicone construction\u003cbr\u003eHeat-resistant embedded fibers\u003cbr\u003eHigh heat and pressure tolerances\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hump Hose Coupler\u003cbr\u003e\u003cbr\u003eHump O\/D 3.3\"\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eLength 3\" \u003cbr\u003eThickness 4mm\u003cbr\u003eOuter Diameter 2.8\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.5\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto Silicone Hump Hose Couplers can be used for a variety of applications, including building your intake and intercooler piping. The \"hump\" flexes for freedom of movement under heavy load and provides increased flexibility between two connected pipes. Available in black, blue, red, and purple. Mishimoto Silicone Hump Hose Couplers are crafted using the same high-grade silicone and heat-resistant embedded fibers we use for our our silicone radiator hoses.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e 100% silicone construction\u003cbr\u003eHeat-resistant embedded fibers\u003cbr\u003eHigh heat and pressure tolerances\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hump Hose Coupler\u003cbr\u003e\u003cbr\u003eHump O\/D 3.3\"\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eLength 3\" \u003cbr\u003eThickness 4mm\u003cbr\u003eOuter Diameter 2.8\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.5\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto Silicone Hump Hose Couplers can be used for a variety of applications, including building your intake and intercooler piping. The \"hump\" flexes for freedom of movement under heavy load and provides increased flexibility between two connected pipes. Available in black, blue, red, and purple. Mishimoto Silicone Hump Hose Couplers are crafted using the same high-grade silicone and heat-resistant embedded fibers we use for our our silicone radiator hoses.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 5 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:25:42+08:00","created_at":"2018-01-24T23:25:43+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["intake","mishimoto","universal-hoses","us1","ws126"],"price":2516,"price_min":2516,"price_max":2516,"available":true,"price_varies":false,"compare_at_price":3400,"compare_at_price_min":3400,"compare_at_price_max":3400,"compare_at_price_varies":false,"variants":[{"id":5990394232859,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMCP-2.5HPBK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Mishimoto Hump Hose Coupler, 2.5\" - Black - Universal - MMCP-2.5HPBK","public_title":null,"options":["Default Title"],"price":2516,"weight":4091,"compare_at_price":3400,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMCP-2.5HPBK.jpg?v=1710154126"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMCP-2.5HPBK.jpg?v=1710154126","options":["Title"],"media":[{"alt":"Mishimoto - Mishimoto Hump Hose Coupler, 2.5\" - Black - Universal - MMCP-2.5HPBK - Rzcrewgarage","id":1351402618977,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMCP-2.5HPBK.jpg?v=1710154126"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMCP-2.5HPBK.jpg?v=1710154126","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMCP-2.5HPBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e 100% silicone construction\u003cbr\u003eHeat-resistant embedded fibers\u003cbr\u003eHigh heat and pressure tolerances\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hump Hose Coupler\u003cbr\u003e\u003cbr\u003eHump O\/D 3.3\"\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eLength 3\" \u003cbr\u003eThickness 4mm\u003cbr\u003eOuter Diameter 2.8\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.5\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto Silicone Hump Hose Couplers can be used for a variety of applications, including building your intake and intercooler piping. The \"hump\" flexes for freedom of movement under heavy load and provides increased flexibility between two connected pipes. Available in black, blue, red, and purple. Mishimoto Silicone Hump Hose Couplers are crafted using the same high-grade silicone and heat-resistant embedded fibers we use for our our silicone radiator hoses.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e 100% silicone construction\u003cbr\u003eHeat-resistant embedded fibers\u003cbr\u003eHigh heat and pressure tolerances\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hump Hose Coupler\u003cbr\u003e\u003cbr\u003eHump O\/D 3.3\"\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eLength 3\" \u003cbr\u003eThickness 4mm\u003cbr\u003eOuter Diameter 2.8\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.5\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto Silicone Hump Hose Couplers can be used for a variety of applications, including building your intake and intercooler piping. The \"hump\" flexes for freedom of movement under heavy load and provides increased flexibility between two connected pipes. Available in black, blue, red, and purple. Mishimoto Silicone Hump Hose Couplers are crafted using the same high-grade silicone and heat-resistant embedded fibers we use for our our silicone radiator hoses.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 5 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}