Build Your Block

{"id":456837398555,"title":"Fluidampr - Harmonic Damper - Subaru - EJ20\/22\/25","handle":"fluidampr-harmonic-damper-subaru-ej20-22-25-531101-531101","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Fluidampr\u003cbr\u003eReference Number: 531101\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eFluidampr Engine Dampers are designed to control destructive vibrations which are transfered thru the crankshaft. Each time the air\/fuel mixture inside a cylinder is ignited, the combustion that occurs creates a torque spike that is applied to the crankshaft through the piston and rod. This torque spike is so severe that it not only turns the crankshaft, it actually twists the crankshaft ahead of its normal rotation and then the crankshaft rebounds. This twisting action is known as torsional vibration. When these torque spikes and forces get into phase with the natural frequency, critical torsional harmonic vibrations occur and can be seriously destructive to the bearings and the crankshaft. Dampers are designed to control those destructive vibrations. Critical harmonic vibrations occur numerous times in a engine’s operating range. Stock rubber and elastomer-type dampers are frequency sensitive “tuned absorbers”, and work at only one critical frequency.\u003cbr\u003e\u003cbr\u003eIn the case of a stock rubber damper, it is tuned for a factory engine’s critical harmonic vibrations. If you change the mass of pistons, rods, or the crankshaft, you change the natural frequency of the crankshaft assembly; therefore, the stock damper is no longer tuned to the new frequency of vibration, and you may be headed for early failure of expensive engine components. Dampers also create heat while they work, and rubber is a poor dissipator of heat. This heat and the exposure to the elements deteriorates rubber, causing it to crack and change durometer, which then leads to inertia ring slippage, damper failure, uncontrolled torsional vibration, and costly engine parts breakage.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ22G | 2200cc | DOHC | 16v | TC | H4,EJ255 | 2500cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e","published_at":"2017-12-18T20:19:59+08:00","created_at":"2017-12-18T20:19:59+08:00","vendor":"Fluidampr","type":"Build Your Block","tags":["build-your-block","ej205-2000cc-dohc-16v-tc-h4","ej22g-2200cc-dohc-16v-tc-h4","ej255-2500cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","engine-pulleys","fluidampr","subaru","us1","ws117"],"price":61337,"price_min":61337,"price_max":61337,"available":true,"price_varies":false,"compare_at_price":73900,"compare_at_price_min":73900,"compare_at_price_max":73900,"compare_at_price_varies":false,"variants":[{"id":5337119850523,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"531101","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Fluidampr - Harmonic Damper - Subaru - EJ20\/22\/25","public_title":null,"options":["Default Title"],"price":61337,"weight":7493,"compare_at_price":73900,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/531101.jpg?v=1710153619"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/531101.jpg?v=1710153619","options":["Title"],"media":[{"alt":"Fluidampr - Harmonic Damper - Subaru - EJ20\/22\/25 - 531101 - 531101","id":22936410718390,"position":1,"preview_image":{"aspect_ratio":0.862,"height":420,"width":362,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/531101.jpg?v=1710153619"},"aspect_ratio":0.862,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/531101.jpg?v=1710153619","width":362}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Fluidampr\u003cbr\u003eReference Number: 531101\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eFluidampr Engine Dampers are designed to control destructive vibrations which are transfered thru the crankshaft. Each time the air\/fuel mixture inside a cylinder is ignited, the combustion that occurs creates a torque spike that is applied to the crankshaft through the piston and rod. This torque spike is so severe that it not only turns the crankshaft, it actually twists the crankshaft ahead of its normal rotation and then the crankshaft rebounds. This twisting action is known as torsional vibration. When these torque spikes and forces get into phase with the natural frequency, critical torsional harmonic vibrations occur and can be seriously destructive to the bearings and the crankshaft. Dampers are designed to control those destructive vibrations. Critical harmonic vibrations occur numerous times in a engine’s operating range. Stock rubber and elastomer-type dampers are frequency sensitive “tuned absorbers”, and work at only one critical frequency.\u003cbr\u003e\u003cbr\u003eIn the case of a stock rubber damper, it is tuned for a factory engine’s critical harmonic vibrations. If you change the mass of pistons, rods, or the crankshaft, you change the natural frequency of the crankshaft assembly; therefore, the stock damper is no longer tuned to the new frequency of vibration, and you may be headed for early failure of expensive engine components. Dampers also create heat while they work, and rubber is a poor dissipator of heat. This heat and the exposure to the elements deteriorates rubber, causing it to crack and change durometer, which then leads to inertia ring slippage, damper failure, uncontrolled torsional vibration, and costly engine parts breakage.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ22G | 2200cc | DOHC | 16v | TC | H4,EJ255 | 2500cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e"}

{"id":456830222363,"title":"ARP - Head Stud kit (Subaru EJ205\/EJ257) 260-4701","handle":"arp-head-stud-kit-subaru-ej205-ej257-260-4701-260-4701-260-4701","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: ARP\u003cbr\u003eReference Number: 260-4701\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eWhen Building or refurbishing an Engine, Arp is the reference for performance engine. Tested to resist all abuse! Special moly-base lubricant and torque instructions are included in kit.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ22G | 2200cc | DOHC | 16v | TC | H4,EJ255 | 2500cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e","published_at":"2017-12-18T20:17:38+08:00","created_at":"2017-12-18T20:17:38+08:00","vendor":"ARP","type":"Build Your Block","tags":["arp","build-your-block","EJ20\/22\/25","ej205-2000cc-dohc-16v-tc-h4","ej22g-2200cc-dohc-16v-tc-h4","ej255-2500cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","head-studs","subaru","us1","ws125"],"price":37800,"price_min":37800,"price_max":37800,"available":true,"price_varies":false,"compare_at_price":50400,"compare_at_price_min":50400,"compare_at_price_max":50400,"compare_at_price_varies":false,"variants":[{"id":5337072402459,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"260-4701","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"ARP - Head Stud kit (Subaru EJ205\/EJ257) 260-4701","public_title":null,"options":["Default Title"],"price":37800,"weight":5814,"compare_at_price":50400,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/260-4701_e18ba175-17f7-4572-83bb-7462f6da9e5b.jpg?v=1710153516"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/260-4701_e18ba175-17f7-4572-83bb-7462f6da9e5b.jpg?v=1710153516","options":["Title"],"media":[{"alt":"ARP - Head Stud kit (Subaru EJ205\/EJ257) 260-4701 - 260-4701 - 260-4701","id":22936385716406,"position":1,"preview_image":{"aspect_ratio":1.27,"height":315,"width":400,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/260-4701_e18ba175-17f7-4572-83bb-7462f6da9e5b.jpg?v=1710153516"},"aspect_ratio":1.27,"height":315,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/260-4701_e18ba175-17f7-4572-83bb-7462f6da9e5b.jpg?v=1710153516","width":400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: ARP\u003cbr\u003eReference Number: 260-4701\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eWhen Building or refurbishing an Engine, Arp is the reference for performance engine. Tested to resist all abuse! Special moly-base lubricant and torque instructions are included in kit.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ22G | 2200cc | DOHC | 16v | TC | H4,EJ255 | 2500cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e"}

{"id":456844083227,"title":"Eagle - Conrods Set - Subaru - EJ20\/22\/25","handle":"eagle-conrods-set-subaru-ej20-22-25-crs5137s3d-crs5137s3d","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Eagle\u003cbr\u003eReference Number: CRS5137S3D\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eMade from premium, 4340 steel billet material, Brian Crower connecting rods are available in two distinct styles depending on horsepower, budget and engine application, but both include the exclusive Brian Crower oiling groove in the pin bushing for added oiling. The bROD Series is intended for moderate boost applications and all motor race applications where peak horsepower is not going to exceed 700 at the flywheel. Utilizes venerable ARP2000 fasteners. The BC625+ Series rods are designed for high horsepower, high boost and extreme rpm applications where nothing but the best rod will do. Features include ARP's premium Custom Age 625+ bolt rated to 280,000 p.s.i. for ultimate fastening capabilities as well as aluminum-bronze bushings to insure long, reliable service, no matter what the boost, nitrous or RPM.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ22G | 2200cc | DOHC | 16v | TC | H4,EJ255 | 2500cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e","published_at":"2017-12-18T20:21:15+08:00","created_at":"2017-12-18T20:21:15+08:00","vendor":"Eagle","type":"Build Your Block","tags":["build-your-block","conrods-kit","eagle","ej205-2000cc-dohc-16v-tc-h4","ej22g-2200cc-dohc-16v-tc-h4","ej255-2500cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","subaru","us1","ws17"],"price":54963,"price_min":54963,"price_max":54963,"available":true,"price_varies":false,"compare_at_price":59100,"compare_at_price_min":59100,"compare_at_price_max":59100,"compare_at_price_varies":false,"variants":[{"id":5337145245723,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CRS5137S3D","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Eagle - Conrods Set - Subaru - EJ20\/22\/25","public_title":null,"options":["Default Title"],"price":54963,"weight":6631,"compare_at_price":59100,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/EAGLE_Conrod_f0759245-df67-4b7c-a958-a747222fe912.jpg?v=1710153745"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/EAGLE_Conrod_f0759245-df67-4b7c-a958-a747222fe912.jpg?v=1710153745","options":["Title"],"media":[{"alt":"Eagle - Conrods Set - Subaru - EJ20\/22\/25 - CRS5137S3D - CRS5137S3D","id":22936436179126,"position":1,"preview_image":{"aspect_ratio":2.941,"height":272,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/EAGLE_Conrod_f0759245-df67-4b7c-a958-a747222fe912.jpg?v=1710153745"},"aspect_ratio":2.941,"height":272,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/EAGLE_Conrod_f0759245-df67-4b7c-a958-a747222fe912.jpg?v=1710153745","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Eagle\u003cbr\u003eReference Number: CRS5137S3D\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eMade from premium, 4340 steel billet material, Brian Crower connecting rods are available in two distinct styles depending on horsepower, budget and engine application, but both include the exclusive Brian Crower oiling groove in the pin bushing for added oiling. The bROD Series is intended for moderate boost applications and all motor race applications where peak horsepower is not going to exceed 700 at the flywheel. Utilizes venerable ARP2000 fasteners. The BC625+ Series rods are designed for high horsepower, high boost and extreme rpm applications where nothing but the best rod will do. Features include ARP's premium Custom Age 625+ bolt rated to 280,000 p.s.i. for ultimate fastening capabilities as well as aluminum-bronze bushings to insure long, reliable service, no matter what the boost, nitrous or RPM.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ22G | 2200cc | DOHC | 16v | TC | H4,EJ255 | 2500cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e"}

{"id":456834383899,"title":"ACL - Race Main Bearing Set For Subaru EJ20\/EJ22\/EJ25 Flange on 5th position","handle":"acl-race-main-bearing-set-for-subaru-ej20-ej22-ej25-flange-on-5th-position-5m8309h-std-5m8309h-std","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: ACL\u003cbr\u003eReference Number: 5M8309H-STD\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe unique combination of design, metallurgy and engineering come together to deliver what drivers expect from high performance Trimetal engine bearings. Acl Race remains one of the best performance bearing around! Available in:\u003cbr\u003eSTD\u003cbr\u003e.25 Tolerance for reparation\u003cbr\u003e.50 Tolerance for reparation\u003cbr\u003eHX .01 Extra Oil clearance application for high RPM\/Output engine.\u003cbr\u003e\u003cbr\u003ePlease state your requirement in the order Notes. If not stated, this product will come as STD tolerance by Default.\n\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ22G | 2200cc | DOHC | 16v | TC | H4,EJ255 | 2500cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e","published_at":"2017-12-18T20:18:56+08:00","created_at":"2017-12-18T20:18:56+08:00","vendor":"ACL","type":"Build Your Block","tags":["acl","build-your-block","ej205-2000cc-dohc-16v-tc-h4","ej22g-2200cc-dohc-16v-tc-h4","ej255-2500cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","main-bearings","subaru","us1","ws133"],"price":11993,"price_min":11993,"price_max":11993,"available":true,"price_varies":false,"compare_at_price":17900,"compare_at_price_min":17900,"compare_at_price_max":17900,"compare_at_price_varies":false,"variants":[{"id":5337096814619,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"5M8309H-STD","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"ACL - Race Main Bearing Set For Subaru EJ20\/EJ22\/EJ25 Flange on 5th position","public_title":null,"options":["Default Title"],"price":11993,"weight":4363,"compare_at_price":17900,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MainBearing_6120879b-3fba-4c27-b690-21be2ef33c0c.jpg?v=1710153574"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MainBearing_6120879b-3fba-4c27-b690-21be2ef33c0c.jpg?v=1710153574","options":["Title"],"media":[{"alt":"ACL - Race Main Bearing Set For Subaru EJ20\/EJ22\/EJ25 Flange on 5th position - 5M8309H-STD - 5M8309H-STD","id":22936401739958,"position":1,"preview_image":{"aspect_ratio":1.129,"height":443,"width":500,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MainBearing_6120879b-3fba-4c27-b690-21be2ef33c0c.jpg?v=1710153574"},"aspect_ratio":1.129,"height":443,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MainBearing_6120879b-3fba-4c27-b690-21be2ef33c0c.jpg?v=1710153574","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: ACL\u003cbr\u003eReference Number: 5M8309H-STD\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe unique combination of design, metallurgy and engineering come together to deliver what drivers expect from high performance Trimetal engine bearings. Acl Race remains one of the best performance bearing around! Available in:\u003cbr\u003eSTD\u003cbr\u003e.25 Tolerance for reparation\u003cbr\u003e.50 Tolerance for reparation\u003cbr\u003eHX .01 Extra Oil clearance application for high RPM\/Output engine.\u003cbr\u003e\u003cbr\u003ePlease state your requirement in the order Notes. If not stated, this product will come as STD tolerance by Default.\n\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ22G | 2200cc | DOHC | 16v | TC | H4,EJ255 | 2500cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e"}

{"id":6145097105590,"title":"ATI - Super Damper - Subaru - EJ20\/22\/25","handle":"ati-super-damper-subaru-ej20-22-25-917991-917991","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: ATI\u003cbr\u003eReference Number: 917991\u003cbr\u003eDiameter: 5.5\"\u003cbr\u003eWeight: 6.0 LBS\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eATI's Super Damper for Subaru WRX EJ20, EJ22 and EJ25 engines\n\u003cbr\u003eDampens torsional crankshaft vibrations at all RPM levels\n\u003cbr\u003eProtects against engine harmonics\n\u003cbr\u003eDirect replacement for the OEM unit\n\u003cbr\u003eFour-rib and five-rib serpentine belt drives\n\u003cbr\u003e5% Overdriven\n\u003cbr\u003eUtilizes factory serpentine belt set-up\n\u003cbr\u003eLaser-etched timing marks\n\u003cbr\u003eSFI 18.1 Safety Certification and are approved for competition use\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ22G | 2200cc | DOHC | 16v | TC | H4,EJ255 | 2500cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e","published_at":"2020-12-15T17:20:11+08:00","created_at":"2020-12-15T17:20:12+08:00","vendor":"ATI","type":"Build Your Block","tags":["ati","build-your-block","ej205-2000cc-dohc-16v-tc-h4","ej22g-2200cc-dohc-16v-tc-h4","ej255-2500cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","engine-pulleys","subaru","us1","ws113"],"price":51156,"price_min":51156,"price_max":51156,"available":true,"price_varies":false,"compare_at_price":58800,"compare_at_price_min":58800,"compare_at_price_max":58800,"compare_at_price_varies":false,"variants":[{"id":37712914743478,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"917991","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"ATI - Super Damper - Subaru - EJ20\/22\/25","public_title":null,"options":["Default Title"],"price":51156,"weight":7221,"compare_at_price":58800,"inventory_quantity":17,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/ATI_Super_Damper_Pulley.jpg?v=1710195998"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/ATI_Super_Damper_Pulley.jpg?v=1710195998","options":["Title"],"media":[{"alt":"ATI - Super Damper - Subaru - EJ20\/22\/25 - 917991 - 917991","id":22936583635126,"position":1,"preview_image":{"aspect_ratio":0.911,"height":461,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/ATI_Super_Damper_Pulley.jpg?v=1710195998"},"aspect_ratio":0.911,"height":461,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/ATI_Super_Damper_Pulley.jpg?v=1710195998","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: ATI\u003cbr\u003eReference Number: 917991\u003cbr\u003eDiameter: 5.5\"\u003cbr\u003eWeight: 6.0 LBS\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eATI's Super Damper for Subaru WRX EJ20, EJ22 and EJ25 engines\n\u003cbr\u003eDampens torsional crankshaft vibrations at all RPM levels\n\u003cbr\u003eProtects against engine harmonics\n\u003cbr\u003eDirect replacement for the OEM unit\n\u003cbr\u003eFour-rib and five-rib serpentine belt drives\n\u003cbr\u003e5% Overdriven\n\u003cbr\u003eUtilizes factory serpentine belt set-up\n\u003cbr\u003eLaser-etched timing marks\n\u003cbr\u003eSFI 18.1 Safety Certification and are approved for competition use\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ22G | 2200cc | DOHC | 16v | TC | H4,EJ255 | 2500cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e"}

{"id":456839397403,"title":"Wiseco - Boost Line Conrods Kit - Subaru - EJ20\/22\/25","handle":"wiseco-boost-line-conrods-kit-subaru-ej20-22-25-sb5137-905-sb5137-905","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Wiseco\u003cbr\u003eReference Number: SB5137-905\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eWiseco Performance Products' Engineering team has created their all-new BoostLine connecting rods for a wide variety of applications. The patent-pending 3-pocket design has been engineered specifically for demanding turbocharged, supercharged and big nitrous applications. These connecting rods are ideal for today’s high horsepower engines and provide 60% more bending strength compared to common H-beam rods! Each rod is designed, finished and inspected in the USA and includes an inspection report from Wiseco's quality team.\u003cbr\u003e\u003cbr\u003e\n\nThe BoostLine connecting rods are a scratch design that takes the best attributes of an H- and I-beam rod and merges them into one. Even though the BoostLine rod is designed for heavy duty use, Wiseco was able to keep the rod relatively light without compromising strength.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 4 left in stock!\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ22G | 2200cc | DOHC | 16v | TC | H4,EJ255 | 2500cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e","published_at":"2024-11-20T11:08:51+08:00","created_at":"2017-12-18T20:20:29+08:00","vendor":"Wiseco","type":"Build Your Block","tags":["build-your-block","conrods-kit","ej205-2000cc-dohc-16v-tc-h4","ej22g-2200cc-dohc-16v-tc-h4","ej255-2500cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","subaru","us1","wiseco","ws18"],"price":98992,"price_min":98992,"price_max":98992,"available":true,"price_varies":false,"compare_at_price":107600,"compare_at_price_min":107600,"compare_at_price_max":107600,"compare_at_price_varies":false,"variants":[{"id":5337128730651,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SB5137-905","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Wiseco - Boost Line Conrods Kit - Subaru - EJ20\/22\/25","public_title":null,"options":["Default Title"],"price":98992,"weight":7175,"compare_at_price":107600,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/BoostLine_Rod_9272a3de-c5b7-4a25-8d2f-85d761e904db.jpg?v=1710153656"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/BoostLine_Rod_9272a3de-c5b7-4a25-8d2f-85d761e904db.jpg?v=1710153656","options":["Title"],"media":[{"alt":"Wiseco - Boost Line Conrods Kit - Subaru - EJ20\/22\/25 - SB5137-905 - SB5137-905","id":22936417566902,"position":1,"preview_image":{"aspect_ratio":1.501,"height":409,"width":614,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/BoostLine_Rod_9272a3de-c5b7-4a25-8d2f-85d761e904db.jpg?v=1710153656"},"aspect_ratio":1.501,"height":409,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/BoostLine_Rod_9272a3de-c5b7-4a25-8d2f-85d761e904db.jpg?v=1710153656","width":614}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Wiseco\u003cbr\u003eReference Number: SB5137-905\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eWiseco Performance Products' Engineering team has created their all-new BoostLine connecting rods for a wide variety of applications. The patent-pending 3-pocket design has been engineered specifically for demanding turbocharged, supercharged and big nitrous applications. These connecting rods are ideal for today’s high horsepower engines and provide 60% more bending strength compared to common H-beam rods! Each rod is designed, finished and inspected in the USA and includes an inspection report from Wiseco's quality team.\u003cbr\u003e\u003cbr\u003e\n\nThe BoostLine connecting rods are a scratch design that takes the best attributes of an H- and I-beam rod and merges them into one. Even though the BoostLine rod is designed for heavy duty use, Wiseco was able to keep the rod relatively light without compromising strength.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 4 left in stock!\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ22G | 2200cc | DOHC | 16v | TC | H4,EJ255 | 2500cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e"}

{"id":456830648347,"title":"ARP - Head Stud kit 625+ CUSTOM AGE (Subaru EJ205\/EJ257) 260-4704","handle":"arp-head-stud-kit-625-custom-age-subaru-ej205-ej257-260-4704-260-4704-260-4704","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: ARP\u003cbr\u003eReference Number: 260-4704\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eWhen Building or refurbishing an Engine, Arp is the reference for performance engine. All Custom Age 625+® studs are centerless ground, heat treated prior to thread rolling and machining, nominally rated at 270,000 psi. These fasteners deliver a 30% increase in tensile strength over the OEM Torque To Yield (TTY) head bolts.Tested to resist all abuse! Special moly-base lubricant and torque instructions are included in kit.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ22G | 2200cc | DOHC | 16v | TC | H4,EJ255 | 2500cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e","published_at":"2017-12-18T20:17:51+08:00","created_at":"2017-12-18T20:17:52+08:00","vendor":"ARP","type":"Build Your Block","tags":["arp","build-your-block","EJ20\/22\/25","ej205-2000cc-dohc-16v-tc-h4","ej22g-2200cc-dohc-16v-tc-h4","ej255-2500cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","head-studs","subaru","us1","ws124"],"price":82612,"price_min":82612,"price_max":82612,"available":true,"price_varies":false,"compare_at_price":108700,"compare_at_price_min":108700,"compare_at_price_max":108700,"compare_at_price_varies":false,"variants":[{"id":5337080332315,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"260-4704","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"ARP - Head Stud kit 625+ CUSTOM AGE (Subaru EJ205\/EJ257) 260-4704","public_title":null,"options":["Default Title"],"price":82612,"weight":5950,"compare_at_price":108700,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/260-4704_9d754a28-65ac-4737-aac0-59194a6f0ad7.jpg?v=1710153518"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/260-4704_9d754a28-65ac-4737-aac0-59194a6f0ad7.jpg?v=1710153518","options":["Title"],"media":[{"alt":"ARP - Head Stud kit 625+ CUSTOM AGE (Subaru EJ205\/EJ257) 260-4704 - 260-4704 - 260-4704","id":22936386732214,"position":1,"preview_image":{"aspect_ratio":1.149,"height":348,"width":400,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/260-4704_9d754a28-65ac-4737-aac0-59194a6f0ad7.jpg?v=1710153518"},"aspect_ratio":1.149,"height":348,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/260-4704_9d754a28-65ac-4737-aac0-59194a6f0ad7.jpg?v=1710153518","width":400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: ARP\u003cbr\u003eReference Number: 260-4704\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eWhen Building or refurbishing an Engine, Arp is the reference for performance engine. All Custom Age 625+® studs are centerless ground, heat treated prior to thread rolling and machining, nominally rated at 270,000 psi. These fasteners deliver a 30% increase in tensile strength over the OEM Torque To Yield (TTY) head bolts.Tested to resist all abuse! Special moly-base lubricant and torque instructions are included in kit.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ22G | 2200cc | DOHC | 16v | TC | H4,EJ255 | 2500cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e"}

{"id":8072890515638,"title":"Rzcrew Racing - Forged Pistons 94mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205","handle":"rzcrew-racing-forged-piston-set-subaru-ej205-94mm-bore-custom-cr","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003eCompression Ratio: Please Choose\u003cbr\u003eBore Diameter: 94mm\u003cbr\u003e\u003cbr\u003eRZCrew's Custom-Made Forged Pistons are engineered for high performance applications, from hot street to competition.\nTo ensure our pistons can take the serious abuse of high compression, extreme boost levels and heavy nitrous usage, while remaining reliable, we use 2618 aluminium alloy for its higher tensile strength.\u003cbr\u003e\n\nOur pistons are fully customized to your specifications (bore and compression ratio) and will be forged accordingly for you upon order.\u003cbr\u003e\u003cbr\u003e\n\nPins, Pin Keepers and Piston Rings are included with your RZCrew Custom-Made Pistons.\u003cbr\u003eRzcrewgarage Pistons feature:\u003cbr\u003e\u003cbr\u003eDedicated forgings\u003cbr\u003eBalanced to + or 1 gram\u003cbr\u003eWrist pins provided at no cost\u003cbr\u003ePin fitting provided at no cost\u003cbr\u003eAccumulator Grooves\u003cbr\u003eDual forced pin oilers\u003cbr\u003ePick lock grooves\u003cbr\u003eFully CNC machined\u003cbr\u003eUSA Made\u003cbr\u003ePlease choose your compression Ratio and diameter in the option menu.\u003cbr\u003e\u003cbr\u003ePlease note:\u003cbr\u003eOptional Up-Rated Pins are available for extreme boost or high RPM usage.\u003cbr\u003eOptional valve pocket design can be changed to accommodate bigger valve sizes.\u003cbr\u003eShort skirt pistons are available.\u003cbr\u003eFor all application not listed in our catalog, feel free to contact us, we will quote you accordingly.\u003cbr\u003eCost may occur depending on the design change and modification needed.\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4\u003c!--split--\u003e","published_at":"2024-09-12T16:29:35+08:00","created_at":"2024-09-12T16:11:37+08:00","vendor":"Rzcrew Racing","type":"Build Your Block","tags":["10-0-1-to-11-0-1-cr","11-0-1-to-12-0-1-cr","12-0-1-to-13-0-1-cr","13-0-1-cr-and-above","9-0-1-to-10-0-1-cr","94","below-9-0-1-cr","build-your-block","EJ205","ej205-2000cc-dohc-16v-tc-h4","piston-kits","rzcrew-garage","rzcrew-racing","sg1","subaru","ws112"],"price":90376,"price_min":90376,"price_max":90376,"available":true,"price_varies":false,"compare_at_price":102700,"compare_at_price_min":102700,"compare_at_price_max":102700,"compare_at_price_varies":false,"variants":[{"id":43464241643702,"title":"8.5","option1":"8.5","option2":null,"option3":null,"sku":"RZ-FP-EJ205-94-8.5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 94mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 8.5","public_title":"8.5","options":["8.5"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464241676470,"title":"9","option1":"9","option2":null,"option3":null,"sku":"RZ-FP-EJ205-94-9.0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 94mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 9","public_title":"9","options":["9"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464241709238,"title":"9.5","option1":"9.5","option2":null,"option3":null,"sku":"RZ-FP-EJ205-94-9.5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 94mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 9.5","public_title":"9.5","options":["9.5"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464241742006,"title":"9.8","option1":"9.8","option2":null,"option3":null,"sku":"RZ-FP-EJ205-94-9.8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 94mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 9.8","public_title":"9.8","options":["9.8"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464241774774,"title":"10","option1":"10","option2":null,"option3":null,"sku":"RZ-FP-EJ205-94-10.0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 94mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 10","public_title":"10","options":["10"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464241807542,"title":"10.3","option1":"10.3","option2":null,"option3":null,"sku":"RZ-FP-EJ205-94-10.3","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 94mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 10.3","public_title":"10.3","options":["10.3"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464241840310,"title":"10.5","option1":"10.5","option2":null,"option3":null,"sku":"RZ-FP-EJ205-94-10.5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 94mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 10.5","public_title":"10.5","options":["10.5"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464241873078,"title":"10.8","option1":"10.8","option2":null,"option3":null,"sku":"RZ-FP-EJ205-94-10.8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 94mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 10.8","public_title":"10.8","options":["10.8"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464241905846,"title":"11","option1":"11","option2":null,"option3":null,"sku":"RZ-FP-EJ205-94-11.0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 94mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 11","public_title":"11","options":["11"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464241938614,"title":"11.3","option1":"11.3","option2":null,"option3":null,"sku":"RZ-FP-EJ205-94-11.3","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 94mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 11.3","public_title":"11.3","options":["11.3"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464241971382,"title":"11.5","option1":"11.5","option2":null,"option3":null,"sku":"RZ-FP-EJ205-94-11.5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 94mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 11.5","public_title":"11.5","options":["11.5"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464242004150,"title":"11.8","option1":"11.8","option2":null,"option3":null,"sku":"RZ-FP-EJ205-94-11.8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 94mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 11.8","public_title":"11.8","options":["11.8"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464242036918,"title":"12","option1":"12","option2":null,"option3":null,"sku":"RZ-FP-EJ205-94-12.0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 94mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 12","public_title":"12","options":["12"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464242069686,"title":"12.3","option1":"12.3","option2":null,"option3":null,"sku":"RZ-FP-EJ205-94-12.3","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 94mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 12.3","public_title":"12.3","options":["12.3"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464242102454,"title":"12.5","option1":"12.5","option2":null,"option3":null,"sku":"RZ-FP-EJ205-94-12.5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 94mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 12.5","public_title":"12.5","options":["12.5"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464242135222,"title":"12.8","option1":"12.8","option2":null,"option3":null,"sku":"RZ-FP-EJ205-94-12.8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 94mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 12.8","public_title":"12.8","options":["12.8"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464242167990,"title":"13","option1":"13","option2":null,"option3":null,"sku":"RZ-FP-EJ205-94-13.0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 94mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 13","public_title":"13","options":["13"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_1_bc7495b8-6b9e-41e8-bfb6-f0245229b19b.jpg?v=1726128857","\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_8bcde126-2f70-4d96-bba4-974a7df966dc.jpg?v=1726128857","\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_4_7f3b6161-baaa-4788-be92-b1ef8951c01b.jpg?v=1726128857","\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_3_b8cc12b2-46d0-4e02-8681-bf94e9f804d9.jpg?v=1726128857"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_1_bc7495b8-6b9e-41e8-bfb6-f0245229b19b.jpg?v=1726128857","options":["Compression Ratio:"],"media":[{"alt":"Rzcrew Racing Forged piston set Subaru EJ205 - 94mm Bore custom CR","id":28477056975030,"position":1,"preview_image":{"aspect_ratio":1.055,"height":1479,"width":1560,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_1_bc7495b8-6b9e-41e8-bfb6-f0245229b19b.jpg?v=1726128857"},"aspect_ratio":1.055,"height":1479,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_1_bc7495b8-6b9e-41e8-bfb6-f0245229b19b.jpg?v=1726128857","width":1560},{"alt":"Rzcrew Racing Forged piston set Subaru EJ205 - 94mm Bore custom CR","id":28477057007798,"position":2,"preview_image":{"aspect_ratio":1.719,"height":864,"width":1485,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_8bcde126-2f70-4d96-bba4-974a7df966dc.jpg?v=1726128857"},"aspect_ratio":1.719,"height":864,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_8bcde126-2f70-4d96-bba4-974a7df966dc.jpg?v=1726128857","width":1485},{"alt":"Rzcrew Racing Forged piston set Subaru EJ205 - 94mm Bore custom CR","id":28477057040566,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1104,"width":1104,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_4_7f3b6161-baaa-4788-be92-b1ef8951c01b.jpg?v=1726128857"},"aspect_ratio":1.0,"height":1104,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_4_7f3b6161-baaa-4788-be92-b1ef8951c01b.jpg?v=1726128857","width":1104},{"alt":"Rzcrew Racing Forged piston set Subaru EJ205 - 94mm Bore custom CR","id":28477057073334,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1560,"width":1560,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_3_b8cc12b2-46d0-4e02-8681-bf94e9f804d9.jpg?v=1726128857"},"aspect_ratio":1.0,"height":1560,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_3_b8cc12b2-46d0-4e02-8681-bf94e9f804d9.jpg?v=1726128857","width":1560}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003eCompression Ratio: Please Choose\u003cbr\u003eBore Diameter: 94mm\u003cbr\u003e\u003cbr\u003eRZCrew's Custom-Made Forged Pistons are engineered for high performance applications, from hot street to competition.\nTo ensure our pistons can take the serious abuse of high compression, extreme boost levels and heavy nitrous usage, while remaining reliable, we use 2618 aluminium alloy for its higher tensile strength.\u003cbr\u003e\n\nOur pistons are fully customized to your specifications (bore and compression ratio) and will be forged accordingly for you upon order.\u003cbr\u003e\u003cbr\u003e\n\nPins, Pin Keepers and Piston Rings are included with your RZCrew Custom-Made Pistons.\u003cbr\u003eRzcrewgarage Pistons feature:\u003cbr\u003e\u003cbr\u003eDedicated forgings\u003cbr\u003eBalanced to + or 1 gram\u003cbr\u003eWrist pins provided at no cost\u003cbr\u003ePin fitting provided at no cost\u003cbr\u003eAccumulator Grooves\u003cbr\u003eDual forced pin oilers\u003cbr\u003ePick lock grooves\u003cbr\u003eFully CNC machined\u003cbr\u003eUSA Made\u003cbr\u003ePlease choose your compression Ratio and diameter in the option menu.\u003cbr\u003e\u003cbr\u003ePlease note:\u003cbr\u003eOptional Up-Rated Pins are available for extreme boost or high RPM usage.\u003cbr\u003eOptional valve pocket design can be changed to accommodate bigger valve sizes.\u003cbr\u003eShort skirt pistons are available.\u003cbr\u003eFor all application not listed in our catalog, feel free to contact us, we will quote you accordingly.\u003cbr\u003eCost may occur depending on the design change and modification needed.\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4\u003c!--split--\u003e"}

{"id":8072890319030,"title":"Rzcrew Racing - Forged Pistons 93.5mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205","handle":"rzcrew-racing-forged-piston-set-subaru-ej205-93-5mm-bore-custom-cr","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003eCompression Ratio: Please Choose\u003cbr\u003eBore Diameter: 93.5mm\u003cbr\u003e\u003cbr\u003eRZCrew's Custom-Made Forged Pistons are engineered for high performance applications, from hot street to competition.\nTo ensure our pistons can take the serious abuse of high compression, extreme boost levels and heavy nitrous usage, while remaining reliable, we use 2618 aluminium alloy for its higher tensile strength.\u003cbr\u003e\n\nOur pistons are fully customized to your specifications (bore and compression ratio) and will be forged accordingly for you upon order.\u003cbr\u003e\u003cbr\u003e\n\nPins, Pin Keepers and Piston Rings are included with your RZCrew Custom-Made Pistons.\u003cbr\u003eRzcrewgarage Pistons feature:\u003cbr\u003e\u003cbr\u003eDedicated forgings\u003cbr\u003eBalanced to + or 1 gram\u003cbr\u003eWrist pins provided at no cost\u003cbr\u003ePin fitting provided at no cost\u003cbr\u003eAccumulator Grooves\u003cbr\u003eDual forced pin oilers\u003cbr\u003ePick lock grooves\u003cbr\u003eFully CNC machined\u003cbr\u003eUSA Made\u003cbr\u003ePlease choose your compression Ratio and diameter in the option menu.\u003cbr\u003e\u003cbr\u003ePlease note:\u003cbr\u003eOptional Up-Rated Pins are available for extreme boost or high RPM usage.\u003cbr\u003eOptional valve pocket design can be changed to accommodate bigger valve sizes.\u003cbr\u003eShort skirt pistons are available.\u003cbr\u003eFor all application not listed in our catalog, feel free to contact us, we will quote you accordingly.\u003cbr\u003eCost may occur depending on the design change and modification needed.\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4\u003c!--split--\u003e","published_at":"2024-09-12T16:29:05+08:00","created_at":"2024-09-12T16:11:30+08:00","vendor":"Rzcrew Racing","type":"Build Your Block","tags":["10-0-1-to-11-0-1-cr","11-0-1-to-12-0-1-cr","12-0-1-to-13-0-1-cr","13-0-1-cr-and-above","9-0-1-to-10-0-1-cr","93-5","below-9-0-1-cr","build-your-block","EJ205","ej205-2000cc-dohc-16v-tc-h4","piston-kits","rzcrew-garage","rzcrew-racing","sg1","subaru","ws112"],"price":90376,"price_min":90376,"price_max":90376,"available":true,"price_varies":false,"compare_at_price":102700,"compare_at_price_min":102700,"compare_at_price_max":102700,"compare_at_price_varies":false,"variants":[{"id":43464241086646,"title":"8.5","option1":"8.5","option2":null,"option3":null,"sku":"RZ-FP-EJ205-93-5-8.5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 93.5mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 8.5","public_title":"8.5","options":["8.5"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464241119414,"title":"9","option1":"9","option2":null,"option3":null,"sku":"RZ-FP-EJ205-93-5-9.0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 93.5mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 9","public_title":"9","options":["9"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464241152182,"title":"9.5","option1":"9.5","option2":null,"option3":null,"sku":"RZ-FP-EJ205-93-5-9.5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 93.5mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 9.5","public_title":"9.5","options":["9.5"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464241184950,"title":"9.8","option1":"9.8","option2":null,"option3":null,"sku":"RZ-FP-EJ205-93-5-9.8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 93.5mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 9.8","public_title":"9.8","options":["9.8"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464241217718,"title":"10","option1":"10","option2":null,"option3":null,"sku":"RZ-FP-EJ205-93-5-10.0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 93.5mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 10","public_title":"10","options":["10"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464241250486,"title":"10.3","option1":"10.3","option2":null,"option3":null,"sku":"RZ-FP-EJ205-93-5-10.3","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 93.5mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 10.3","public_title":"10.3","options":["10.3"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464241283254,"title":"10.5","option1":"10.5","option2":null,"option3":null,"sku":"RZ-FP-EJ205-93-5-10.5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 93.5mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 10.5","public_title":"10.5","options":["10.5"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464241316022,"title":"10.8","option1":"10.8","option2":null,"option3":null,"sku":"RZ-FP-EJ205-93-5-10.8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 93.5mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 10.8","public_title":"10.8","options":["10.8"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464241348790,"title":"11","option1":"11","option2":null,"option3":null,"sku":"RZ-FP-EJ205-93-5-11.0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 93.5mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 11","public_title":"11","options":["11"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464241381558,"title":"11.3","option1":"11.3","option2":null,"option3":null,"sku":"RZ-FP-EJ205-93-5-11.3","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 93.5mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 11.3","public_title":"11.3","options":["11.3"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464241414326,"title":"11.5","option1":"11.5","option2":null,"option3":null,"sku":"RZ-FP-EJ205-93-5-11.5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 93.5mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 11.5","public_title":"11.5","options":["11.5"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464241447094,"title":"11.8","option1":"11.8","option2":null,"option3":null,"sku":"RZ-FP-EJ205-93-5-11.8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 93.5mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 11.8","public_title":"11.8","options":["11.8"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464241479862,"title":"12","option1":"12","option2":null,"option3":null,"sku":"RZ-FP-EJ205-93-5-12.0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 93.5mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 12","public_title":"12","options":["12"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464241512630,"title":"12.3","option1":"12.3","option2":null,"option3":null,"sku":"RZ-FP-EJ205-93-5-12.3","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 93.5mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 12.3","public_title":"12.3","options":["12.3"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464241545398,"title":"12.5","option1":"12.5","option2":null,"option3":null,"sku":"RZ-FP-EJ205-93-5-12.5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 93.5mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 12.5","public_title":"12.5","options":["12.5"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464241578166,"title":"12.8","option1":"12.8","option2":null,"option3":null,"sku":"RZ-FP-EJ205-93-5-12.8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 93.5mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 12.8","public_title":"12.8","options":["12.8"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464241610934,"title":"13","option1":"13","option2":null,"option3":null,"sku":"RZ-FP-EJ205-93-5-13.0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 93.5mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 13","public_title":"13","options":["13"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_3_c2e61e04-a877-4bd1-8b56-c1f5fcf6bfa6.jpg?v=1726128851","\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_1_66224cfa-48b9-4b7d-8a7d-bb36ce93c557.jpg?v=1726128851","\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_6c5c4f2c-b393-48d7-a3a1-29ae9d3a82e2.jpg?v=1726128851","\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_4_943f74de-1807-4272-b355-fdb763084b28.jpg?v=1726128851"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_3_c2e61e04-a877-4bd1-8b56-c1f5fcf6bfa6.jpg?v=1726128851","options":["Compression Ratio:"],"media":[{"alt":"Rzcrew Racing Forged piston set Subaru EJ205 - 93.5mm Bore custom CR","id":28477056483510,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1560,"width":1560,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_3_c2e61e04-a877-4bd1-8b56-c1f5fcf6bfa6.jpg?v=1726128851"},"aspect_ratio":1.0,"height":1560,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_3_c2e61e04-a877-4bd1-8b56-c1f5fcf6bfa6.jpg?v=1726128851","width":1560},{"alt":"Rzcrew Racing Forged piston set Subaru EJ205 - 93.5mm Bore custom CR","id":28477056516278,"position":2,"preview_image":{"aspect_ratio":1.055,"height":1479,"width":1560,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_1_66224cfa-48b9-4b7d-8a7d-bb36ce93c557.jpg?v=1726128851"},"aspect_ratio":1.055,"height":1479,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_1_66224cfa-48b9-4b7d-8a7d-bb36ce93c557.jpg?v=1726128851","width":1560},{"alt":"Rzcrew Racing Forged piston set Subaru EJ205 - 93.5mm Bore custom CR","id":28477056549046,"position":3,"preview_image":{"aspect_ratio":1.719,"height":864,"width":1485,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_6c5c4f2c-b393-48d7-a3a1-29ae9d3a82e2.jpg?v=1726128851"},"aspect_ratio":1.719,"height":864,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_6c5c4f2c-b393-48d7-a3a1-29ae9d3a82e2.jpg?v=1726128851","width":1485},{"alt":"Rzcrew Racing Forged piston set Subaru EJ205 - 93.5mm Bore custom CR","id":28477056581814,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1104,"width":1104,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_4_943f74de-1807-4272-b355-fdb763084b28.jpg?v=1726128851"},"aspect_ratio":1.0,"height":1104,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_4_943f74de-1807-4272-b355-fdb763084b28.jpg?v=1726128851","width":1104}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003eCompression Ratio: Please Choose\u003cbr\u003eBore Diameter: 93.5mm\u003cbr\u003e\u003cbr\u003eRZCrew's Custom-Made Forged Pistons are engineered for high performance applications, from hot street to competition.\nTo ensure our pistons can take the serious abuse of high compression, extreme boost levels and heavy nitrous usage, while remaining reliable, we use 2618 aluminium alloy for its higher tensile strength.\u003cbr\u003e\n\nOur pistons are fully customized to your specifications (bore and compression ratio) and will be forged accordingly for you upon order.\u003cbr\u003e\u003cbr\u003e\n\nPins, Pin Keepers and Piston Rings are included with your RZCrew Custom-Made Pistons.\u003cbr\u003eRzcrewgarage Pistons feature:\u003cbr\u003e\u003cbr\u003eDedicated forgings\u003cbr\u003eBalanced to + or 1 gram\u003cbr\u003eWrist pins provided at no cost\u003cbr\u003ePin fitting provided at no cost\u003cbr\u003eAccumulator Grooves\u003cbr\u003eDual forced pin oilers\u003cbr\u003ePick lock grooves\u003cbr\u003eFully CNC machined\u003cbr\u003eUSA Made\u003cbr\u003ePlease choose your compression Ratio and diameter in the option menu.\u003cbr\u003e\u003cbr\u003ePlease note:\u003cbr\u003eOptional Up-Rated Pins are available for extreme boost or high RPM usage.\u003cbr\u003eOptional valve pocket design can be changed to accommodate bigger valve sizes.\u003cbr\u003eShort skirt pistons are available.\u003cbr\u003eFor all application not listed in our catalog, feel free to contact us, we will quote you accordingly.\u003cbr\u003eCost may occur depending on the design change and modification needed.\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4\u003c!--split--\u003e"}

{"id":8072890155190,"title":"Rzcrew Racing - Forged Pistons 93mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205","handle":"rzcrew-racing-forged-piston-set-subaru-ej205-93mm-bore-custom-cr","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003eCompression Ratio: Please Choose\u003cbr\u003eBore Diameter: 93mm\u003cbr\u003e\u003cbr\u003eRZCrew's Custom-Made Forged Pistons are engineered for high performance applications, from hot street to competition.\nTo ensure our pistons can take the serious abuse of high compression, extreme boost levels and heavy nitrous usage, while remaining reliable, we use 2618 aluminium alloy for its higher tensile strength.\u003cbr\u003e\n\nOur pistons are fully customized to your specifications (bore and compression ratio) and will be forged accordingly for you upon order.\u003cbr\u003e\u003cbr\u003e\n\nPins, Pin Keepers and Piston Rings are included with your RZCrew Custom-Made Pistons.\u003cbr\u003eRzcrewgarage Pistons feature:\u003cbr\u003e\u003cbr\u003eDedicated forgings\u003cbr\u003eBalanced to + or 1 gram\u003cbr\u003eWrist pins provided at no cost\u003cbr\u003ePin fitting provided at no cost\u003cbr\u003eAccumulator Grooves\u003cbr\u003eDual forced pin oilers\u003cbr\u003ePick lock grooves\u003cbr\u003eFully CNC machined\u003cbr\u003eUSA Made\u003cbr\u003ePlease choose your compression Ratio and diameter in the option menu.\u003cbr\u003e\u003cbr\u003ePlease note:\u003cbr\u003eOptional Up-Rated Pins are available for extreme boost or high RPM usage.\u003cbr\u003eOptional valve pocket design can be changed to accommodate bigger valve sizes.\u003cbr\u003eShort skirt pistons are available.\u003cbr\u003eFor all application not listed in our catalog, feel free to contact us, we will quote you accordingly.\u003cbr\u003eCost may occur depending on the design change and modification needed.\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4\u003c!--split--\u003e","published_at":"2024-09-12T16:29:36+08:00","created_at":"2024-09-12T16:11:24+08:00","vendor":"Rzcrew Racing","type":"Build Your Block","tags":["10-0-1-to-11-0-1-cr","11-0-1-to-12-0-1-cr","12-0-1-to-13-0-1-cr","13-0-1-cr-and-above","9-0-1-to-10-0-1-cr","93","below-9-0-1-cr","build-your-block","EJ205","ej205-2000cc-dohc-16v-tc-h4","piston-kits","rzcrew-garage","rzcrew-racing","sg1","subaru","ws112"],"price":90376,"price_min":90376,"price_max":90376,"available":true,"price_varies":false,"compare_at_price":102700,"compare_at_price_min":102700,"compare_at_price_max":102700,"compare_at_price_varies":false,"variants":[{"id":43464240431286,"title":"8.5","option1":"8.5","option2":null,"option3":null,"sku":"RZ-FP-EJ205-93-8.5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 93mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 8.5","public_title":"8.5","options":["8.5"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464240464054,"title":"9","option1":"9","option2":null,"option3":null,"sku":"RZ-FP-EJ205-93-9.0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 93mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 9","public_title":"9","options":["9"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464240496822,"title":"9.5","option1":"9.5","option2":null,"option3":null,"sku":"RZ-FP-EJ205-93-9.5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 93mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 9.5","public_title":"9.5","options":["9.5"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464240529590,"title":"9.8","option1":"9.8","option2":null,"option3":null,"sku":"RZ-FP-EJ205-93-9.8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 93mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 9.8","public_title":"9.8","options":["9.8"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464240562358,"title":"10","option1":"10","option2":null,"option3":null,"sku":"RZ-FP-EJ205-93-10.0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 93mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 10","public_title":"10","options":["10"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464240595126,"title":"10.3","option1":"10.3","option2":null,"option3":null,"sku":"RZ-FP-EJ205-93-10.3","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 93mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 10.3","public_title":"10.3","options":["10.3"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464240627894,"title":"10.5","option1":"10.5","option2":null,"option3":null,"sku":"RZ-FP-EJ205-93-10.5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 93mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 10.5","public_title":"10.5","options":["10.5"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464240660662,"title":"10.8","option1":"10.8","option2":null,"option3":null,"sku":"RZ-FP-EJ205-93-10.8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 93mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 10.8","public_title":"10.8","options":["10.8"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464240693430,"title":"11","option1":"11","option2":null,"option3":null,"sku":"RZ-FP-EJ205-93-11.0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 93mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 11","public_title":"11","options":["11"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464240726198,"title":"11.3","option1":"11.3","option2":null,"option3":null,"sku":"RZ-FP-EJ205-93-11.3","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 93mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 11.3","public_title":"11.3","options":["11.3"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464240758966,"title":"11.5","option1":"11.5","option2":null,"option3":null,"sku":"RZ-FP-EJ205-93-11.5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 93mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 11.5","public_title":"11.5","options":["11.5"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464240791734,"title":"11.8","option1":"11.8","option2":null,"option3":null,"sku":"RZ-FP-EJ205-93-11.8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 93mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 11.8","public_title":"11.8","options":["11.8"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464240824502,"title":"12","option1":"12","option2":null,"option3":null,"sku":"RZ-FP-EJ205-93-12.0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 93mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 12","public_title":"12","options":["12"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464240857270,"title":"12.3","option1":"12.3","option2":null,"option3":null,"sku":"RZ-FP-EJ205-93-12.3","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 93mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 12.3","public_title":"12.3","options":["12.3"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464240890038,"title":"12.5","option1":"12.5","option2":null,"option3":null,"sku":"RZ-FP-EJ205-93-12.5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 93mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 12.5","public_title":"12.5","options":["12.5"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464240922806,"title":"12.8","option1":"12.8","option2":null,"option3":null,"sku":"RZ-FP-EJ205-93-12.8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 93mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 12.8","public_title":"12.8","options":["12.8"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464240955574,"title":"13","option1":"13","option2":null,"option3":null,"sku":"RZ-FP-EJ205-93-13.0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 93mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 13","public_title":"13","options":["13"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_4_c208059e-43fe-4e6c-88d3-4f0ca73db179.jpg?v=1726128844","\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_3_332ff983-1a72-4558-91e5-f8e2b4e60634.jpg?v=1726128844","\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_1_06cbefb7-6a05-4f53-a8e1-2681df94486a.jpg?v=1726128844","\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_85473e3b-51cd-4c2a-a8d3-2dc2b1603ff6.jpg?v=1726128844"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_4_c208059e-43fe-4e6c-88d3-4f0ca73db179.jpg?v=1726128844","options":["Compression Ratio:"],"media":[{"alt":"Rzcrew Racing Forged piston set Subaru EJ205 - 93mm Bore custom CR","id":28477056090294,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1104,"width":1104,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_4_c208059e-43fe-4e6c-88d3-4f0ca73db179.jpg?v=1726128844"},"aspect_ratio":1.0,"height":1104,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_4_c208059e-43fe-4e6c-88d3-4f0ca73db179.jpg?v=1726128844","width":1104},{"alt":"Rzcrew Racing Forged piston set Subaru EJ205 - 93mm Bore custom CR","id":28477056123062,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1560,"width":1560,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_3_332ff983-1a72-4558-91e5-f8e2b4e60634.jpg?v=1726128844"},"aspect_ratio":1.0,"height":1560,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_3_332ff983-1a72-4558-91e5-f8e2b4e60634.jpg?v=1726128844","width":1560},{"alt":"Rzcrew Racing Forged piston set Subaru EJ205 - 93mm Bore custom CR","id":28477056155830,"position":3,"preview_image":{"aspect_ratio":1.055,"height":1479,"width":1560,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_1_06cbefb7-6a05-4f53-a8e1-2681df94486a.jpg?v=1726128844"},"aspect_ratio":1.055,"height":1479,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_1_06cbefb7-6a05-4f53-a8e1-2681df94486a.jpg?v=1726128844","width":1560},{"alt":"Rzcrew Racing Forged piston set Subaru EJ205 - 93mm Bore custom CR","id":28477056188598,"position":4,"preview_image":{"aspect_ratio":1.719,"height":864,"width":1485,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_85473e3b-51cd-4c2a-a8d3-2dc2b1603ff6.jpg?v=1726128844"},"aspect_ratio":1.719,"height":864,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_85473e3b-51cd-4c2a-a8d3-2dc2b1603ff6.jpg?v=1726128844","width":1485}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003eCompression Ratio: Please Choose\u003cbr\u003eBore Diameter: 93mm\u003cbr\u003e\u003cbr\u003eRZCrew's Custom-Made Forged Pistons are engineered for high performance applications, from hot street to competition.\nTo ensure our pistons can take the serious abuse of high compression, extreme boost levels and heavy nitrous usage, while remaining reliable, we use 2618 aluminium alloy for its higher tensile strength.\u003cbr\u003e\n\nOur pistons are fully customized to your specifications (bore and compression ratio) and will be forged accordingly for you upon order.\u003cbr\u003e\u003cbr\u003e\n\nPins, Pin Keepers and Piston Rings are included with your RZCrew Custom-Made Pistons.\u003cbr\u003eRzcrewgarage Pistons feature:\u003cbr\u003e\u003cbr\u003eDedicated forgings\u003cbr\u003eBalanced to + or 1 gram\u003cbr\u003eWrist pins provided at no cost\u003cbr\u003ePin fitting provided at no cost\u003cbr\u003eAccumulator Grooves\u003cbr\u003eDual forced pin oilers\u003cbr\u003ePick lock grooves\u003cbr\u003eFully CNC machined\u003cbr\u003eUSA Made\u003cbr\u003ePlease choose your compression Ratio and diameter in the option menu.\u003cbr\u003e\u003cbr\u003ePlease note:\u003cbr\u003eOptional Up-Rated Pins are available for extreme boost or high RPM usage.\u003cbr\u003eOptional valve pocket design can be changed to accommodate bigger valve sizes.\u003cbr\u003eShort skirt pistons are available.\u003cbr\u003eFor all application not listed in our catalog, feel free to contact us, we will quote you accordingly.\u003cbr\u003eCost may occur depending on the design change and modification needed.\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4\u003c!--split--\u003e"}

{"id":8072890024118,"title":"Rzcrew Racing - Forged Pistons 92.5mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205","handle":"rzcrew-racing-forged-piston-set-subaru-ej205-92-5mm-bore-custom-cr","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003eCompression Ratio: Please Choose\u003cbr\u003eBore Diameter: 92.5mm\u003cbr\u003e\u003cbr\u003eRZCrew's Custom-Made Forged Pistons are engineered for high performance applications, from hot street to competition.\nTo ensure our pistons can take the serious abuse of high compression, extreme boost levels and heavy nitrous usage, while remaining reliable, we use 2618 aluminium alloy for its higher tensile strength.\u003cbr\u003e\n\nOur pistons are fully customized to your specifications (bore and compression ratio) and will be forged accordingly for you upon order.\u003cbr\u003e\u003cbr\u003e\n\nPins, Pin Keepers and Piston Rings are included with your RZCrew Custom-Made Pistons.\u003cbr\u003eRzcrewgarage Pistons feature:\u003cbr\u003e\u003cbr\u003eDedicated forgings\u003cbr\u003eBalanced to + or 1 gram\u003cbr\u003eWrist pins provided at no cost\u003cbr\u003ePin fitting provided at no cost\u003cbr\u003eAccumulator Grooves\u003cbr\u003eDual forced pin oilers\u003cbr\u003ePick lock grooves\u003cbr\u003eFully CNC machined\u003cbr\u003eUSA Made\u003cbr\u003ePlease choose your compression Ratio and diameter in the option menu.\u003cbr\u003e\u003cbr\u003ePlease note:\u003cbr\u003eOptional Up-Rated Pins are available for extreme boost or high RPM usage.\u003cbr\u003eOptional valve pocket design can be changed to accommodate bigger valve sizes.\u003cbr\u003eShort skirt pistons are available.\u003cbr\u003eFor all application not listed in our catalog, feel free to contact us, we will quote you accordingly.\u003cbr\u003eCost may occur depending on the design change and modification needed.\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4\u003c!--split--\u003e","published_at":"2024-09-12T16:29:06+08:00","created_at":"2024-09-12T16:11:17+08:00","vendor":"Rzcrew Racing","type":"Build Your Block","tags":["10-0-1-to-11-0-1-cr","11-0-1-to-12-0-1-cr","12-0-1-to-13-0-1-cr","13-0-1-cr-and-above","9-0-1-to-10-0-1-cr","92-5","below-9-0-1-cr","build-your-block","EJ205","ej205-2000cc-dohc-16v-tc-h4","piston-kits","rzcrew-garage","rzcrew-racing","sg1","subaru","ws112"],"price":90376,"price_min":90376,"price_max":90376,"available":true,"price_varies":false,"compare_at_price":102700,"compare_at_price_min":102700,"compare_at_price_max":102700,"compare_at_price_varies":false,"variants":[{"id":43464239808694,"title":"8.5","option1":"8.5","option2":null,"option3":null,"sku":"RZ-FP-EJ205-92-5-8.5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 92.5mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 8.5","public_title":"8.5","options":["8.5"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464239841462,"title":"9","option1":"9","option2":null,"option3":null,"sku":"RZ-FP-EJ205-92-5-9.0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 92.5mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 9","public_title":"9","options":["9"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464239874230,"title":"9.5","option1":"9.5","option2":null,"option3":null,"sku":"RZ-FP-EJ205-92-5-9.5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 92.5mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 9.5","public_title":"9.5","options":["9.5"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464239906998,"title":"9.8","option1":"9.8","option2":null,"option3":null,"sku":"RZ-FP-EJ205-92-5-9.8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 92.5mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 9.8","public_title":"9.8","options":["9.8"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464239939766,"title":"10","option1":"10","option2":null,"option3":null,"sku":"RZ-FP-EJ205-92-5-10.0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 92.5mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 10","public_title":"10","options":["10"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464239972534,"title":"10.3","option1":"10.3","option2":null,"option3":null,"sku":"RZ-FP-EJ205-92-5-10.3","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 92.5mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 10.3","public_title":"10.3","options":["10.3"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464240005302,"title":"10.5","option1":"10.5","option2":null,"option3":null,"sku":"RZ-FP-EJ205-92-5-10.5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 92.5mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 10.5","public_title":"10.5","options":["10.5"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464240038070,"title":"10.8","option1":"10.8","option2":null,"option3":null,"sku":"RZ-FP-EJ205-92-5-10.8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 92.5mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 10.8","public_title":"10.8","options":["10.8"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464240070838,"title":"11","option1":"11","option2":null,"option3":null,"sku":"RZ-FP-EJ205-92-5-11.0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 92.5mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 11","public_title":"11","options":["11"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464240103606,"title":"11.3","option1":"11.3","option2":null,"option3":null,"sku":"RZ-FP-EJ205-92-5-11.3","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 92.5mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 11.3","public_title":"11.3","options":["11.3"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464240136374,"title":"11.5","option1":"11.5","option2":null,"option3":null,"sku":"RZ-FP-EJ205-92-5-11.5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 92.5mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 11.5","public_title":"11.5","options":["11.5"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464240169142,"title":"11.8","option1":"11.8","option2":null,"option3":null,"sku":"RZ-FP-EJ205-92-5-11.8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 92.5mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 11.8","public_title":"11.8","options":["11.8"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464240201910,"title":"12","option1":"12","option2":null,"option3":null,"sku":"RZ-FP-EJ205-92-5-12.0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 92.5mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 12","public_title":"12","options":["12"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464240234678,"title":"12.3","option1":"12.3","option2":null,"option3":null,"sku":"RZ-FP-EJ205-92-5-12.3","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 92.5mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 12.3","public_title":"12.3","options":["12.3"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464240267446,"title":"12.5","option1":"12.5","option2":null,"option3":null,"sku":"RZ-FP-EJ205-92-5-12.5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 92.5mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 12.5","public_title":"12.5","options":["12.5"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464240300214,"title":"12.8","option1":"12.8","option2":null,"option3":null,"sku":"RZ-FP-EJ205-92-5-12.8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 92.5mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 12.8","public_title":"12.8","options":["12.8"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464240332982,"title":"13","option1":"13","option2":null,"option3":null,"sku":"RZ-FP-EJ205-92-5-13.0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 92.5mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 13","public_title":"13","options":["13"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_ef202f91-0378-43c7-9c1c-6268b56f04dc.jpg?v=1726128838","\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_4_b3e02e37-f2bb-4f97-b8d8-7fdfe7e4e135.jpg?v=1726128838","\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_3_f4f0f021-958a-468b-8d27-1f11a7fcf885.jpg?v=1726128838","\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_1_ddccc995-d299-4795-b497-e6429bdbf745.jpg?v=1726128838"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_ef202f91-0378-43c7-9c1c-6268b56f04dc.jpg?v=1726128838","options":["Compression Ratio:"],"media":[{"alt":"Rzcrew Racing Forged piston set Subaru EJ205 - 92.5mm Bore custom CR","id":28477055828150,"position":1,"preview_image":{"aspect_ratio":1.719,"height":864,"width":1485,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_ef202f91-0378-43c7-9c1c-6268b56f04dc.jpg?v=1726128838"},"aspect_ratio":1.719,"height":864,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_ef202f91-0378-43c7-9c1c-6268b56f04dc.jpg?v=1726128838","width":1485},{"alt":"Rzcrew Racing Forged piston set Subaru EJ205 - 92.5mm Bore custom CR","id":28477055860918,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1104,"width":1104,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_4_b3e02e37-f2bb-4f97-b8d8-7fdfe7e4e135.jpg?v=1726128838"},"aspect_ratio":1.0,"height":1104,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_4_b3e02e37-f2bb-4f97-b8d8-7fdfe7e4e135.jpg?v=1726128838","width":1104},{"alt":"Rzcrew Racing Forged piston set Subaru EJ205 - 92.5mm Bore custom CR","id":28477055893686,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1560,"width":1560,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_3_f4f0f021-958a-468b-8d27-1f11a7fcf885.jpg?v=1726128838"},"aspect_ratio":1.0,"height":1560,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_3_f4f0f021-958a-468b-8d27-1f11a7fcf885.jpg?v=1726128838","width":1560},{"alt":"Rzcrew Racing Forged piston set Subaru EJ205 - 92.5mm Bore custom CR","id":28477055926454,"position":4,"preview_image":{"aspect_ratio":1.055,"height":1479,"width":1560,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_1_ddccc995-d299-4795-b497-e6429bdbf745.jpg?v=1726128838"},"aspect_ratio":1.055,"height":1479,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_1_ddccc995-d299-4795-b497-e6429bdbf745.jpg?v=1726128838","width":1560}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003eCompression Ratio: Please Choose\u003cbr\u003eBore Diameter: 92.5mm\u003cbr\u003e\u003cbr\u003eRZCrew's Custom-Made Forged Pistons are engineered for high performance applications, from hot street to competition.\nTo ensure our pistons can take the serious abuse of high compression, extreme boost levels and heavy nitrous usage, while remaining reliable, we use 2618 aluminium alloy for its higher tensile strength.\u003cbr\u003e\n\nOur pistons are fully customized to your specifications (bore and compression ratio) and will be forged accordingly for you upon order.\u003cbr\u003e\u003cbr\u003e\n\nPins, Pin Keepers and Piston Rings are included with your RZCrew Custom-Made Pistons.\u003cbr\u003eRzcrewgarage Pistons feature:\u003cbr\u003e\u003cbr\u003eDedicated forgings\u003cbr\u003eBalanced to + or 1 gram\u003cbr\u003eWrist pins provided at no cost\u003cbr\u003ePin fitting provided at no cost\u003cbr\u003eAccumulator Grooves\u003cbr\u003eDual forced pin oilers\u003cbr\u003ePick lock grooves\u003cbr\u003eFully CNC machined\u003cbr\u003eUSA Made\u003cbr\u003ePlease choose your compression Ratio and diameter in the option menu.\u003cbr\u003e\u003cbr\u003ePlease note:\u003cbr\u003eOptional Up-Rated Pins are available for extreme boost or high RPM usage.\u003cbr\u003eOptional valve pocket design can be changed to accommodate bigger valve sizes.\u003cbr\u003eShort skirt pistons are available.\u003cbr\u003eFor all application not listed in our catalog, feel free to contact us, we will quote you accordingly.\u003cbr\u003eCost may occur depending on the design change and modification needed.\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4\u003c!--split--\u003e"}

{"id":8072889893046,"title":"Rzcrew Racing - Forged Pistons 92mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205","handle":"rzcrew-racing-forged-piston-set-subaru-ej205-92mm-bore-custom-cr","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003eCompression Ratio: Please Choose\u003cbr\u003eBore Diameter: 92mm\u003cbr\u003e\u003cbr\u003eRZCrew's Custom-Made Forged Pistons are engineered for high performance applications, from hot street to competition.\nTo ensure our pistons can take the serious abuse of high compression, extreme boost levels and heavy nitrous usage, while remaining reliable, we use 2618 aluminium alloy for its higher tensile strength.\u003cbr\u003e\n\nOur pistons are fully customized to your specifications (bore and compression ratio) and will be forged accordingly for you upon order.\u003cbr\u003e\u003cbr\u003e\n\nPins, Pin Keepers and Piston Rings are included with your RZCrew Custom-Made Pistons.\u003cbr\u003eRzcrewgarage Pistons feature:\u003cbr\u003e\u003cbr\u003eDedicated forgings\u003cbr\u003eBalanced to + or 1 gram\u003cbr\u003eWrist pins provided at no cost\u003cbr\u003ePin fitting provided at no cost\u003cbr\u003eAccumulator Grooves\u003cbr\u003eDual forced pin oilers\u003cbr\u003ePick lock grooves\u003cbr\u003eFully CNC machined\u003cbr\u003eUSA Made\u003cbr\u003ePlease choose your compression Ratio and diameter in the option menu.\u003cbr\u003e\u003cbr\u003ePlease note:\u003cbr\u003eOptional Up-Rated Pins are available for extreme boost or high RPM usage.\u003cbr\u003eOptional valve pocket design can be changed to accommodate bigger valve sizes.\u003cbr\u003eShort skirt pistons are available.\u003cbr\u003eFor all application not listed in our catalog, feel free to contact us, we will quote you accordingly.\u003cbr\u003eCost may occur depending on the design change and modification needed.\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4\u003c!--split--\u003e","published_at":"2024-09-12T16:29:05+08:00","created_at":"2024-09-12T16:11:10+08:00","vendor":"Rzcrew Racing","type":"Build Your Block","tags":["10-0-1-to-11-0-1-cr","11-0-1-to-12-0-1-cr","12-0-1-to-13-0-1-cr","13-0-1-cr-and-above","9-0-1-to-10-0-1-cr","92","below-9-0-1-cr","build-your-block","EJ205","ej205-2000cc-dohc-16v-tc-h4","piston-kits","rzcrew-garage","rzcrew-racing","sg1","subaru","ws112"],"price":90376,"price_min":90376,"price_max":90376,"available":true,"price_varies":false,"compare_at_price":102700,"compare_at_price_min":102700,"compare_at_price_max":102700,"compare_at_price_varies":false,"variants":[{"id":43464239120566,"title":"8.5","option1":"8.5","option2":null,"option3":null,"sku":"RZ-FP-EJ205-92-8.5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 92mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 8.5","public_title":"8.5","options":["8.5"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464239153334,"title":"9","option1":"9","option2":null,"option3":null,"sku":"RZ-FP-EJ205-92-9.0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 92mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 9","public_title":"9","options":["9"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464239186102,"title":"9.5","option1":"9.5","option2":null,"option3":null,"sku":"RZ-FP-EJ205-92-9.5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 92mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 9.5","public_title":"9.5","options":["9.5"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464239218870,"title":"9.8","option1":"9.8","option2":null,"option3":null,"sku":"RZ-FP-EJ205-92-9.8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 92mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 9.8","public_title":"9.8","options":["9.8"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464239251638,"title":"10","option1":"10","option2":null,"option3":null,"sku":"RZ-FP-EJ205-92-10.0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 92mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 10","public_title":"10","options":["10"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464239284406,"title":"10.3","option1":"10.3","option2":null,"option3":null,"sku":"RZ-FP-EJ205-92-10.3","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 92mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 10.3","public_title":"10.3","options":["10.3"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464239317174,"title":"10.5","option1":"10.5","option2":null,"option3":null,"sku":"RZ-FP-EJ205-92-10.5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 92mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 10.5","public_title":"10.5","options":["10.5"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464239349942,"title":"10.8","option1":"10.8","option2":null,"option3":null,"sku":"RZ-FP-EJ205-92-10.8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 92mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 10.8","public_title":"10.8","options":["10.8"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464239382710,"title":"11","option1":"11","option2":null,"option3":null,"sku":"RZ-FP-EJ205-92-11.0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 92mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 11","public_title":"11","options":["11"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464239415478,"title":"11.3","option1":"11.3","option2":null,"option3":null,"sku":"RZ-FP-EJ205-92-11.3","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 92mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 11.3","public_title":"11.3","options":["11.3"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464239448246,"title":"11.5","option1":"11.5","option2":null,"option3":null,"sku":"RZ-FP-EJ205-92-11.5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 92mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 11.5","public_title":"11.5","options":["11.5"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464239481014,"title":"11.8","option1":"11.8","option2":null,"option3":null,"sku":"RZ-FP-EJ205-92-11.8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 92mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 11.8","public_title":"11.8","options":["11.8"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464239513782,"title":"12","option1":"12","option2":null,"option3":null,"sku":"RZ-FP-EJ205-92-12.0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 92mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 12","public_title":"12","options":["12"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464239546550,"title":"12.3","option1":"12.3","option2":null,"option3":null,"sku":"RZ-FP-EJ205-92-12.3","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 92mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 12.3","public_title":"12.3","options":["12.3"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464239579318,"title":"12.5","option1":"12.5","option2":null,"option3":null,"sku":"RZ-FP-EJ205-92-12.5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 92mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 12.5","public_title":"12.5","options":["12.5"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464239612086,"title":"12.8","option1":"12.8","option2":null,"option3":null,"sku":"RZ-FP-EJ205-92-12.8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 92mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 12.8","public_title":"12.8","options":["12.8"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43464239644854,"title":"13","option1":"13","option2":null,"option3":null,"sku":"RZ-FP-EJ205-92-13.0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Forged Pistons 92mm - 8:5 to 15:0 Compression Ratio - Subaru - EJ205 - 13","public_title":"13","options":["13"],"price":90376,"weight":8200,"compare_at_price":102700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_1_70adbd17-94d9-463e-b31e-eba022536e18.jpg?v=1726128831","\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_93177834-530b-44e3-8791-3befbca2e21a.jpg?v=1726128831","\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_4_9458cebb-171e-4fc3-b248-3be95b71baeb.jpg?v=1726128831","\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_3_a3e7b352-313f-4204-9c5c-f8b9520a94c1.jpg?v=1726128831"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_1_70adbd17-94d9-463e-b31e-eba022536e18.jpg?v=1726128831","options":["Compression Ratio:"],"media":[{"alt":"Rzcrew Racing Forged piston set Subaru EJ205 - 92mm Bore custom CR","id":28477054419126,"position":1,"preview_image":{"aspect_ratio":1.055,"height":1479,"width":1560,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_1_70adbd17-94d9-463e-b31e-eba022536e18.jpg?v=1726128831"},"aspect_ratio":1.055,"height":1479,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_1_70adbd17-94d9-463e-b31e-eba022536e18.jpg?v=1726128831","width":1560},{"alt":"Rzcrew Racing Forged piston set Subaru EJ205 - 92mm Bore custom CR","id":28477054451894,"position":2,"preview_image":{"aspect_ratio":1.719,"height":864,"width":1485,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_93177834-530b-44e3-8791-3befbca2e21a.jpg?v=1726128831"},"aspect_ratio":1.719,"height":864,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_93177834-530b-44e3-8791-3befbca2e21a.jpg?v=1726128831","width":1485},{"alt":"Rzcrew Racing Forged piston set Subaru EJ205 - 92mm Bore custom CR","id":28477054484662,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1104,"width":1104,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_4_9458cebb-171e-4fc3-b248-3be95b71baeb.jpg?v=1726128831"},"aspect_ratio":1.0,"height":1104,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_4_9458cebb-171e-4fc3-b248-3be95b71baeb.jpg?v=1726128831","width":1104},{"alt":"Rzcrew Racing Forged piston set Subaru EJ205 - 92mm Bore custom CR","id":28477054517430,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1560,"width":1560,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_3_a3e7b352-313f-4204-9c5c-f8b9520a94c1.jpg?v=1726128831"},"aspect_ratio":1.0,"height":1560,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_L15B7_Forged_pistons_-_Honda_Civic_10th_gen_Turbo_3_a3e7b352-313f-4204-9c5c-f8b9520a94c1.jpg?v=1726128831","width":1560}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003eCompression Ratio: Please Choose\u003cbr\u003eBore Diameter: 92mm\u003cbr\u003e\u003cbr\u003eRZCrew's Custom-Made Forged Pistons are engineered for high performance applications, from hot street to competition.\nTo ensure our pistons can take the serious abuse of high compression, extreme boost levels and heavy nitrous usage, while remaining reliable, we use 2618 aluminium alloy for its higher tensile strength.\u003cbr\u003e\n\nOur pistons are fully customized to your specifications (bore and compression ratio) and will be forged accordingly for you upon order.\u003cbr\u003e\u003cbr\u003e\n\nPins, Pin Keepers and Piston Rings are included with your RZCrew Custom-Made Pistons.\u003cbr\u003eRzcrewgarage Pistons feature:\u003cbr\u003e\u003cbr\u003eDedicated forgings\u003cbr\u003eBalanced to + or 1 gram\u003cbr\u003eWrist pins provided at no cost\u003cbr\u003ePin fitting provided at no cost\u003cbr\u003eAccumulator Grooves\u003cbr\u003eDual forced pin oilers\u003cbr\u003ePick lock grooves\u003cbr\u003eFully CNC machined\u003cbr\u003eUSA Made\u003cbr\u003ePlease choose your compression Ratio and diameter in the option menu.\u003cbr\u003e\u003cbr\u003ePlease note:\u003cbr\u003eOptional Up-Rated Pins are available for extreme boost or high RPM usage.\u003cbr\u003eOptional valve pocket design can be changed to accommodate bigger valve sizes.\u003cbr\u003eShort skirt pistons are available.\u003cbr\u003eFor all application not listed in our catalog, feel free to contact us, we will quote you accordingly.\u003cbr\u003eCost may occur depending on the design change and modification needed.\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4\u003c!--split--\u003e"}

{"id":8071937523894,"title":"Wiseco - Boost Line Conrods Kit ARP 625+ - Subaru - EJ20\/22\/25","handle":"wiseco-boost-line-conrods-kit-arp-625-subaru-ej20-22-25-sb5137-905-sb5137-905","description":"\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Wiseco\u003cbr\u003eReference Number: SB5137-905+\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBoostline Subaru EJ Series Connecting Rod Set, 130.00 mm Length, 23.00 mm Pin, 52.00 mm Journal, 3\/8 in. ARP 625+ Bolts, 4340 Steel, Patented Three-Pocket Design, Set of 4.\u003cbr\u003eBoostLine connecting rods are designed and built for the stressful demands of high-powered, forced induction and nitrous engines. Whether you’re building a boosted K-series, a track-ready Volkswagen, or a sneaky SRT4, BoostLine connecting rods have been proven in import and domestic four-cylinder engines confidently pushing 1,000HP+. BoostLine rods are forged from premium 4340 steel and utilize a patented, three-pocket design, maximizing strength while minimizing rotating weight. This revolutionary design dramatically improves each rods’ big-end stability under tensile loads and provides a 60% improvement in bending strength and 20% stress reduction in tension compared to H-beam designs, benefits crucial to durability in four-digit-horsepower engines. Each rod is equipped standard with industry leading ARP hardware and is subject to a 26-point, CMM inspection with all critical dimensions provided via an inspection card included with every set of rods. BoostLine connecting rods are the complete package for every performance build, from powerful projects to all-out race cars.\u003cbr\u003e\u003c\/p\u003e\n\u003c!--split--\u003e\n\u003cp\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c\/p\u003e\n\u003c!--split--\u003e\n\u003cp\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ22G | 2200cc | DOHC | 16v | TC | H4,EJ255 | 2500cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c\/p\u003e\n\u003c!--split--\u003e","published_at":"2024-09-11T11:47:46+08:00","created_at":"2024-09-11T11:46:33+08:00","vendor":"Wiseco","type":"Build Your Block","tags":["build-your-block","conrods-kit","ej205-2000cc-dohc-16v-tc-h4","ej22g-2200cc-dohc-16v-tc-h4","ej255-2500cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","subaru","us1","wiseco","ws18"],"price":134596,"price_min":134596,"price_max":134596,"available":true,"price_varies":false,"compare_at_price":146300,"compare_at_price_min":146300,"compare_at_price_max":146300,"compare_at_price_varies":false,"variants":[{"id":43461500666038,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SB5137-905+","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Wiseco - Boost Line Conrods Kit ARP 625+ - Subaru - EJ20\/22\/25","public_title":null,"options":["Default Title"],"price":134596,"weight":7675,"compare_at_price":146300,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/BoostLine_Rod.jpg?v=1726026393"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/BoostLine_Rod.jpg?v=1726026393","options":["Title"],"media":[{"alt":"Wiseco - Boost Line Conrods Kit ARP 625+ - Subaru - EJ20\/22\/25 - SB5137-905+ - SB5137-905+","id":28472902254774,"position":1,"preview_image":{"aspect_ratio":1.501,"height":409,"width":614,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/BoostLine_Rod.jpg?v=1726026393"},"aspect_ratio":1.501,"height":409,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/BoostLine_Rod.jpg?v=1726026393","width":614}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Wiseco\u003cbr\u003eReference Number: SB5137-905+\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBoostline Subaru EJ Series Connecting Rod Set, 130.00 mm Length, 23.00 mm Pin, 52.00 mm Journal, 3\/8 in. ARP 625+ Bolts, 4340 Steel, Patented Three-Pocket Design, Set of 4.\u003cbr\u003eBoostLine connecting rods are designed and built for the stressful demands of high-powered, forced induction and nitrous engines. Whether you’re building a boosted K-series, a track-ready Volkswagen, or a sneaky SRT4, BoostLine connecting rods have been proven in import and domestic four-cylinder engines confidently pushing 1,000HP+. BoostLine rods are forged from premium 4340 steel and utilize a patented, three-pocket design, maximizing strength while minimizing rotating weight. This revolutionary design dramatically improves each rods’ big-end stability under tensile loads and provides a 60% improvement in bending strength and 20% stress reduction in tension compared to H-beam designs, benefits crucial to durability in four-digit-horsepower engines. Each rod is equipped standard with industry leading ARP hardware and is subject to a 26-point, CMM inspection with all critical dimensions provided via an inspection card included with every set of rods. BoostLine connecting rods are the complete package for every performance build, from powerful projects to all-out race cars.\u003cbr\u003e\u003c\/p\u003e\n\u003c!--split--\u003e\n\u003cp\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c\/p\u003e\n\u003c!--split--\u003e\n\u003cp\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ22G | 2200cc | DOHC | 16v | TC | H4,EJ255 | 2500cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c\/p\u003e\n\u003c!--split--\u003e"}

{"id":7199401509046,"title":"Carrillo Subaru EJ18\/EJ20\/EJ257 Pro-A 3\/8 WMC Bolt Connecting Rods (Special Order No Cancel)","handle":"carrillo-subaru-ej18-ej20-ej257-pro-a-3-8-wmc-bolt-connecting-rods-special-order-no-cancel-scr5477-4","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR5477-4\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e","published_at":"2021-12-14T18:33:24+08:00","created_at":"2021-12-14T18:21:18+08:00","vendor":"Carrillo","type":"Build Your Block","tags":["build-your-block","carrillo","conrods-kit","ej205-2000cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","subaru","us1","ws15"],"price":148105,"price_min":148105,"price_max":148105,"available":true,"price_varies":false,"compare_at_price":155900,"compare_at_price_min":155900,"compare_at_price_max":155900,"compare_at_price_varies":false,"variants":[{"id":40995223371958,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SCR5477-4","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Carrillo Subaru EJ18\/EJ20\/EJ257 Pro-A 3\/8 WMC Bolt Connecting Rods (Special Order No Cancel)","public_title":null,"options":["Default Title"],"price":148105,"weight":10804,"compare_at_price":155900,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej257-pro-a-38-wmc-bolt-connecting-rods-special-order-no-cancel-rzcrew.jpg?v=1710321725"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej257-pro-a-38-wmc-bolt-connecting-rods-special-order-no-cancel-rzcrew.jpg?v=1710321725","options":["Title"],"media":[{"alt":"Carrillo Subaru EJ18\/EJ20\/EJ257 Pro-A 3\/8 WMC Bolt Connecting Rods (Special Order No Cancel) - SCR5477-4","id":23157970370742,"position":1,"preview_image":{"aspect_ratio":1.446,"height":747,"width":1080,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej257-pro-a-38-wmc-bolt-connecting-rods-special-order-no-cancel-rzcrew.jpg?v=1710321725"},"aspect_ratio":1.446,"height":747,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej257-pro-a-38-wmc-bolt-connecting-rods-special-order-no-cancel-rzcrew.jpg?v=1710321725","width":1080}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR5477-4\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e"}

{"id":7199401410742,"title":"Carrillo Subaru EJ18\/EJ20\/EJ257 (WRX Sti) Pro-H 3\/8 WMC Bolt Connecting Rods","handle":"carrillo-subaru-ej18-ej20-ej257-wrx-sti-pro-h-3-8-wmc-bolt-connecting-rods-scr4245-4","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR4245-4\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 4 left in stock!\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e","published_at":"2021-12-14T18:33:24+08:00","created_at":"2021-12-14T18:21:17+08:00","vendor":"Carrillo","type":"Build Your Block","tags":["build-your-block","carrillo","conrods-kit","ej205-2000cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","subaru","us1","ws14"],"price":156768,"price_min":156768,"price_max":156768,"available":true,"price_varies":false,"compare_at_price":163300,"compare_at_price_min":163300,"compare_at_price_max":163300,"compare_at_price_varies":false,"variants":[{"id":40995222290614,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SCR4245-4","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Carrillo Subaru EJ18\/EJ20\/EJ257 (WRX Sti) Pro-H 3\/8 WMC Bolt Connecting Rods","public_title":null,"options":["Default Title"],"price":156768,"weight":6449,"compare_at_price":163300,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej257-wrx-sti-pro-h-38-wmc-bolt-connecting-rods-rzcrew.jpg?v=1710321726"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej257-wrx-sti-pro-h-38-wmc-bolt-connecting-rods-rzcrew.jpg?v=1710321726","options":["Title"],"media":[{"alt":"Carrillo Subaru EJ18\/EJ20\/EJ257 (WRX Sti) Pro-H 3\/8 WMC Bolt Connecting Rods - SCR4245-4","id":23157969846454,"position":1,"preview_image":{"aspect_ratio":1.446,"height":747,"width":1080,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej257-wrx-sti-pro-h-38-wmc-bolt-connecting-rods-rzcrew.jpg?v=1710321726"},"aspect_ratio":1.446,"height":747,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej257-wrx-sti-pro-h-38-wmc-bolt-connecting-rods-rzcrew.jpg?v=1710321726","width":1080}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR4245-4\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 4 left in stock!\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e"}

{"id":7199401345206,"title":"Carrillo Subaru EJ18\/EJ20\/EJ257 (WRX Sti) Pro-H 3\/8 CARR Bolt Connecting Rods","handle":"carrillo-subaru-ej18-ej20-ej257-wrx-sti-pro-h-3-8-carr-bolt-connecting-rods-scr4246-4","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR4246-4\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e","published_at":"2021-12-14T18:33:24+08:00","created_at":"2021-12-14T18:21:16+08:00","vendor":"Carrillo","type":"Build Your Block","tags":["build-your-block","carrillo","conrods-kit","ej205-2000cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","subaru","us1","ws14"],"price":185952,"price_min":185952,"price_max":185952,"available":true,"price_varies":false,"compare_at_price":193700,"compare_at_price_min":193700,"compare_at_price_max":193700,"compare_at_price_varies":false,"variants":[{"id":40995222225078,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SCR4246-4","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Carrillo Subaru EJ18\/EJ20\/EJ257 (WRX Sti) Pro-H 3\/8 CARR Bolt Connecting Rods","public_title":null,"options":["Default Title"],"price":185952,"weight":6540,"compare_at_price":193700,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej257-wrx-sti-pro-h-38-carr-bolt-connecting-rods-rzcrew.jpg?v=1710321727"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej257-wrx-sti-pro-h-38-carr-bolt-connecting-rods-rzcrew.jpg?v=1710321727","options":["Title"],"media":[{"alt":"Carrillo Subaru EJ18\/EJ20\/EJ257 (WRX Sti) Pro-H 3\/8 CARR Bolt Connecting Rods - SCR4246-4","id":23157969813686,"position":1,"preview_image":{"aspect_ratio":1.446,"height":747,"width":1080,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej257-wrx-sti-pro-h-38-carr-bolt-connecting-rods-rzcrew.jpg?v=1710321727"},"aspect_ratio":1.446,"height":747,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej257-wrx-sti-pro-h-38-carr-bolt-connecting-rods-rzcrew.jpg?v=1710321727","width":1080}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR4246-4\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e"}

{"id":7199394529462,"title":"Carrillo Subaru EJ18\/EJ20\/EJ22\/EJ257 (WRX Sti) Pro-H 3\/8 WMC Bolt Heavy Duty Connecting Rods","handle":"carrillo-subaru-ej18-ej20-ej22-ej257-wrx-sti-pro-h-3-8-wmc-bolt-heavy-duty-connecting-rods-scr8593-4","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR8593-4\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e","published_at":"2021-12-14T18:32:23+08:00","created_at":"2021-12-14T18:18:35+08:00","vendor":"Carrillo","type":"Build Your Block","tags":["build-your-block","carrillo","conrods-kit","ej205-2000cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","subaru","us1","ws14"],"price":156768,"price_min":156768,"price_max":156768,"available":true,"price_varies":false,"compare_at_price":163300,"compare_at_price_min":163300,"compare_at_price_max":163300,"compare_at_price_varies":false,"variants":[{"id":40995193225398,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SCR8593-4","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Carrillo Subaru EJ18\/EJ20\/EJ22\/EJ257 (WRX Sti) Pro-H 3\/8 WMC Bolt Heavy Duty Connecting Rods","public_title":null,"options":["Default Title"],"price":156768,"weight":6631,"compare_at_price":163300,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej22ej257-wrx-sti-pro-h-38-wmc-bolt-heavy-duty-connecting-rods-rzcrew.jpg?v=1710321783"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej22ej257-wrx-sti-pro-h-38-wmc-bolt-heavy-duty-connecting-rods-rzcrew.jpg?v=1710321783","options":["Title"],"media":[{"alt":"Carrillo Subaru EJ18\/EJ20\/EJ22\/EJ257 (WRX Sti) Pro-H 3\/8 WMC Bolt Heavy Duty Connecting Rods - SCR8593-4","id":23157943468214,"position":1,"preview_image":{"aspect_ratio":1.446,"height":747,"width":1080,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej22ej257-wrx-sti-pro-h-38-wmc-bolt-heavy-duty-connecting-rods-rzcrew.jpg?v=1710321783"},"aspect_ratio":1.446,"height":747,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej22ej257-wrx-sti-pro-h-38-wmc-bolt-heavy-duty-connecting-rods-rzcrew.jpg?v=1710321783","width":1080}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR8593-4\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e"}

{"id":7199394496694,"title":"Carrillo Subaru EJ18\/EJ20\/EJ22\/EJ257 (WRX Sti) Pro-H 3\/8 CARR Bolt Heavy Duty Connecting Rods","handle":"carrillo-subaru-ej18-ej20-ej22-ej257-wrx-sti-pro-h-3-8-carr-bolt-heavy-duty-connecting-rods-scr7594-4","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR7594-4\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e","published_at":"2021-12-14T18:32:21+08:00","created_at":"2021-12-14T18:18:34+08:00","vendor":"Carrillo","type":"Build Your Block","tags":["build-your-block","carrillo","conrods-kit","ej205-2000cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","subaru","us1","ws14"],"price":185952,"price_min":185952,"price_max":185952,"available":true,"price_varies":false,"compare_at_price":193700,"compare_at_price_min":193700,"compare_at_price_max":193700,"compare_at_price_varies":false,"variants":[{"id":40995193192630,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SCR7594-4","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Carrillo Subaru EJ18\/EJ20\/EJ22\/EJ257 (WRX Sti) Pro-H 3\/8 CARR Bolt Heavy Duty Connecting Rods","public_title":null,"options":["Default Title"],"price":185952,"weight":9443,"compare_at_price":193700,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej22ej257-wrx-sti-pro-h-38-carr-bolt-heavy-duty-connecting-rods-rzcrew.jpg?v=1710321783"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej22ej257-wrx-sti-pro-h-38-carr-bolt-heavy-duty-connecting-rods-rzcrew.jpg?v=1710321783","options":["Title"],"media":[{"alt":"Carrillo Subaru EJ18\/EJ20\/EJ22\/EJ257 (WRX Sti) Pro-H 3\/8 CARR Bolt Heavy Duty Connecting Rods - SCR7594-4","id":23157943271606,"position":1,"preview_image":{"aspect_ratio":1.446,"height":747,"width":1080,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej22ej257-wrx-sti-pro-h-38-carr-bolt-heavy-duty-connecting-rods-rzcrew.jpg?v=1710321783"},"aspect_ratio":1.446,"height":747,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej22ej257-wrx-sti-pro-h-38-carr-bolt-heavy-duty-connecting-rods-rzcrew.jpg?v=1710321783","width":1080}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR7594-4\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e"}

{"id":7199394463926,"title":"Carrillo Subaru EJ18\/EJ20\/EJ22\/EJ257 (WRX Sti) Pro-H 3\/8 CARR Bolt Heavy Duty Connecting Rod (1 Rod)","handle":"carrillo-subaru-ej18-ej20-ej22-ej257-wrx-sti-pro-h-3-8-carr-bolt-heavy-duty-connecting-rod-1-rod-scr7594-1","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR7594-1\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e","published_at":"2021-12-14T18:32:30+08:00","created_at":"2021-12-14T18:18:32+08:00","vendor":"Carrillo","type":"Build Your Block","tags":["build-your-block","carrillo","conrods-kit","ej205-2000cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","subaru","us1","ws18"],"price":53176,"price_min":53176,"price_max":53176,"available":true,"price_varies":false,"compare_at_price":57800,"compare_at_price_min":57800,"compare_at_price_max":57800,"compare_at_price_varies":false,"variants":[{"id":40995193159862,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SCR7594-1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Carrillo Subaru EJ18\/EJ20\/EJ22\/EJ257 (WRX Sti) Pro-H 3\/8 CARR Bolt Heavy Duty Connecting Rod (1 Rod)","public_title":null,"options":["Default Title"],"price":53176,"weight":5361,"compare_at_price":57800,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej22ej257-wrx-sti-pro-h-38-carr-bolt-heavy-duty-connecting-rod-1-rod-rzcrew.jpg?v=1710321783"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej22ej257-wrx-sti-pro-h-38-carr-bolt-heavy-duty-connecting-rod-1-rod-rzcrew.jpg?v=1710321783","options":["Title"],"media":[{"alt":"Carrillo Subaru EJ18\/EJ20\/EJ22\/EJ257 (WRX Sti) Pro-H 3\/8 CARR Bolt Heavy Duty Connecting Rod (1 Rod) - SCR7594-1","id":23157943107766,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej22ej257-wrx-sti-pro-h-38-carr-bolt-heavy-duty-connecting-rod-1-rod-rzcrew.jpg?v=1710321783"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej22ej257-wrx-sti-pro-h-38-carr-bolt-heavy-duty-connecting-rod-1-rod-rzcrew.jpg?v=1710321783","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR7594-1\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e"}

{"id":7199394431158,"title":"Carrillo Subaru EJ18\/EJ20\/EJ22\/EJ257 (WRX Sti) Pro-H 3\/8 WMC Bolt Heavy Duty Connecting Rod (1 Rod)","handle":"carrillo-subaru-ej18-ej20-ej22-ej257-wrx-sti-pro-h-3-8-wmc-bolt-heavy-duty-connecting-rod-1-rod-scr8593-1","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR8593-1\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e","published_at":"2021-12-14T18:18:30+08:00","created_at":"2021-12-14T18:18:31+08:00","vendor":"Carrillo","type":"Build Your Block","tags":["build-your-block","carrillo","conrods-kit","ej205-2000cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","subaru","us1","ws18"],"price":45356,"price_min":45356,"price_max":45356,"available":true,"price_varies":false,"compare_at_price":49300,"compare_at_price_min":49300,"compare_at_price_max":49300,"compare_at_price_varies":false,"variants":[{"id":40995193127094,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SCR8593-1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Carrillo Subaru EJ18\/EJ20\/EJ22\/EJ257 (WRX Sti) Pro-H 3\/8 WMC Bolt Heavy Duty Connecting Rod (1 Rod)","public_title":null,"options":["Default Title"],"price":45356,"weight":5361,"compare_at_price":49300,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej22ej257-wrx-sti-pro-h-38-wmc-bolt-heavy-duty-connecting-rod-1-rod-rzcrew.jpg?v=1710321783"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej22ej257-wrx-sti-pro-h-38-wmc-bolt-heavy-duty-connecting-rod-1-rod-rzcrew.jpg?v=1710321783","options":["Title"],"media":[{"alt":"Carrillo Subaru EJ18\/EJ20\/EJ22\/EJ257 (WRX Sti) Pro-H 3\/8 WMC Bolt Heavy Duty Connecting Rod (1 Rod) - SCR8593-1","id":23157943042230,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej22ej257-wrx-sti-pro-h-38-wmc-bolt-heavy-duty-connecting-rod-1-rod-rzcrew.jpg?v=1710321783"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej22ej257-wrx-sti-pro-h-38-wmc-bolt-heavy-duty-connecting-rod-1-rod-rzcrew.jpg?v=1710321783","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR8593-1\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e"}

{"id":7199391678646,"title":"Carrillo Subaru EJ18\/EJ20\/EJ257 (WRX Sti) Pro-H 3\/8 CARR Bolt Connecting Rod (SINGLE ROD)","handle":"carrillo-subaru-ej18-ej20-ej257-wrx-sti-pro-h-3-8-carr-bolt-connecting-rod-single-rod-scr4246-1","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR4246-1\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e","published_at":"2021-12-14T18:32:06+08:00","created_at":"2021-12-14T18:16:59+08:00","vendor":"Carrillo","type":"Build Your Block","tags":["build-your-block","carrillo","conrods-kit","ej205-2000cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","subaru","us1","ws18"],"price":53176,"price_min":53176,"price_max":53176,"available":true,"price_varies":false,"compare_at_price":57800,"compare_at_price_min":57800,"compare_at_price_max":57800,"compare_at_price_varies":false,"variants":[{"id":40995177988278,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SCR4246-1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Carrillo Subaru EJ18\/EJ20\/EJ257 (WRX Sti) Pro-H 3\/8 CARR Bolt Connecting Rod (SINGLE ROD)","public_title":null,"options":["Default Title"],"price":53176,"weight":6268,"compare_at_price":57800,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej257-wrx-sti-pro-h-38-carr-bolt-connecting-rod-single-rod-rzcrew.jpg?v=1710321816"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej257-wrx-sti-pro-h-38-carr-bolt-connecting-rod-single-rod-rzcrew.jpg?v=1710321816","options":["Title"],"media":[{"alt":"Carrillo Subaru EJ18\/EJ20\/EJ257 (WRX Sti) Pro-H 3\/8 CARR Bolt Connecting Rod (SINGLE ROD) - SCR4246-1","id":23157931212982,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej257-wrx-sti-pro-h-38-carr-bolt-connecting-rod-single-rod-rzcrew.jpg?v=1710321816"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej257-wrx-sti-pro-h-38-carr-bolt-connecting-rod-single-rod-rzcrew.jpg?v=1710321816","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR4246-1\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e"}

{"id":7199391449270,"title":"Carrillo Subaru EJ18\/EJ20\/EJ257 (WRX Sti) Pro-SA 3\/8 WMC Bolt Connecting Rod (SINGLE ROD)","handle":"carrillo-subaru-ej18-ej20-ej257-wrx-sti-pro-sa-3-8-wmc-bolt-connecting-rod-single-rod-scr4578-1","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR4578-1\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e","published_at":"2021-12-14T18:32:11+08:00","created_at":"2021-12-14T18:16:47+08:00","vendor":"Carrillo","type":"Build Your Block","tags":["build-your-block","carrillo","conrods-kit","ej205-2000cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","subaru","us1","ws18"],"price":45356,"price_min":45356,"price_max":45356,"available":true,"price_varies":false,"compare_at_price":49300,"compare_at_price_min":49300,"compare_at_price_max":49300,"compare_at_price_varies":false,"variants":[{"id":40995174383798,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SCR4578-1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Carrillo Subaru EJ18\/EJ20\/EJ257 (WRX Sti) Pro-SA 3\/8 WMC Bolt Connecting Rod (SINGLE ROD)","public_title":null,"options":["Default Title"],"price":45356,"weight":4907,"compare_at_price":49300,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej257-wrx-sti-pro-sa-38-wmc-bolt-connecting-rod-single-rod-rzcrew.jpg?v=1710321824"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej257-wrx-sti-pro-sa-38-wmc-bolt-connecting-rod-single-rod-rzcrew.jpg?v=1710321824","options":["Title"],"media":[{"alt":"Carrillo Subaru EJ18\/EJ20\/EJ257 (WRX Sti) Pro-SA 3\/8 WMC Bolt Connecting Rod (SINGLE ROD) - SCR4578-1","id":23157929738422,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej257-wrx-sti-pro-sa-38-wmc-bolt-connecting-rod-single-rod-rzcrew.jpg?v=1710321824"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej257-wrx-sti-pro-sa-38-wmc-bolt-connecting-rod-single-rod-rzcrew.jpg?v=1710321824","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR4578-1\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e"}

{"id":7199391416502,"title":"Carrillo Subaru EJ18\/EJ20\/EJ257 (WRX Sti) Pro-A 3\/8 WMC Bolt Connecting Rod - Single (S\/O No Cancel)","handle":"carrillo-subaru-ej18-ej20-ej257-wrx-sti-pro-a-3-8-wmc-bolt-connecting-rod-single-s-o-no-cancel-scr5477-1","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR5477-1\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e","published_at":"2021-12-14T18:32:02+08:00","created_at":"2021-12-14T18:16:43+08:00","vendor":"Carrillo","type":"Build Your Block","tags":["build-your-block","carrillo","conrods-kit","ej205-2000cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","subaru","us1","ws18"],"price":45356,"price_min":45356,"price_max":45356,"available":true,"price_varies":false,"compare_at_price":49300,"compare_at_price_min":49300,"compare_at_price_max":49300,"compare_at_price_varies":false,"variants":[{"id":40995174318262,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SCR5477-1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Carrillo Subaru EJ18\/EJ20\/EJ257 (WRX Sti) Pro-A 3\/8 WMC Bolt Connecting Rod - Single (S\/O No Cancel)","public_title":null,"options":["Default Title"],"price":45356,"weight":5361,"compare_at_price":49300,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej257-wrx-sti-pro-a-38-wmc-bolt-connecting-rod-single-so-no-cancel-rzcrew.jpg?v=1710321824"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej257-wrx-sti-pro-a-38-wmc-bolt-connecting-rod-single-so-no-cancel-rzcrew.jpg?v=1710321824","options":["Title"],"media":[{"alt":"Carrillo Subaru EJ18\/EJ20\/EJ257 (WRX Sti) Pro-A 3\/8 WMC Bolt Connecting Rod - Single (S\/O No Cancel) - SCR5477-1","id":23157929640118,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej257-wrx-sti-pro-a-38-wmc-bolt-connecting-rod-single-so-no-cancel-rzcrew.jpg?v=1710321824"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej257-wrx-sti-pro-a-38-wmc-bolt-connecting-rod-single-so-no-cancel-rzcrew.jpg?v=1710321824","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR5477-1\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e"}

{"id":7199389679798,"title":"Carrillo Subaru EJ18\/EJ20\/EJ22\/EJ257 (WRX Sti) Pro-H 3\/8 WMC Bolt Connecting Rod (1 rod)","handle":"carrillo-subaru-ej18-ej20-ej22-ej257-wrx-sti-pro-h-3-8-wmc-bolt-connecting-rod-1-rod-scr4245-1","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR4245-1\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e","published_at":"2021-12-14T18:31:45+08:00","created_at":"2021-12-14T18:15:47+08:00","vendor":"Carrillo","type":"Build Your Block","tags":["build-your-block","carrillo","conrods-kit","ej205-2000cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","subaru","us1","ws18"],"price":45356,"price_min":45356,"price_max":45356,"available":true,"price_varies":false,"compare_at_price":49300,"compare_at_price_min":49300,"compare_at_price_max":49300,"compare_at_price_varies":false,"variants":[{"id":40995168223414,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SCR4245-1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Carrillo Subaru EJ18\/EJ20\/EJ22\/EJ257 (WRX Sti) Pro-H 3\/8 WMC Bolt Connecting Rod (1 rod)","public_title":null,"options":["Default Title"],"price":45356,"weight":10804,"compare_at_price":49300,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej22ej257-wrx-sti-pro-h-38-wmc-bolt-connecting-rod-1-rod-rzcrew.jpg?v=1710321844"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej22ej257-wrx-sti-pro-h-38-wmc-bolt-connecting-rod-1-rod-rzcrew.jpg?v=1710321844","options":["Title"],"media":[{"alt":"Carrillo Subaru EJ18\/EJ20\/EJ22\/EJ257 (WRX Sti) Pro-H 3\/8 WMC Bolt Connecting Rod (1 rod) - SCR4245-1","id":23157924823222,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej22ej257-wrx-sti-pro-h-38-wmc-bolt-connecting-rod-1-rod-rzcrew.jpg?v=1710321844"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-subaru-ej18ej20ej22ej257-wrx-sti-pro-h-38-wmc-bolt-connecting-rod-1-rod-rzcrew.jpg?v=1710321844","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR4245-1\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e"}