Civic Type R | EP3 | 2001-2005 | NA | K20A | I4

{"id":6252286771382,"title":"Recaro Japan - Base Frame Seat Rail Standard Left - Honda Civic Type-R EP3\/EP3 (2001-2005)","handle":"recaro-japan-base-frame-seat-rail-standard-left-honda-civic-type-r-ep3-ep3-2001-2005-2085-529-1","description":"SPECIFICATIONS:\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position:5mm lower than OEM seat.(Middle position of 3 position baseframe with ST-JJ)15mm to console from OEM seat.The length of slider is 70mm shorter than OEM seat on front side.The length of slider is 50mm longer than OEM seat on rear side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.(Except for Ferio)For non-side airbag car only.,2WD.\u003cbr\u003eSR-3,4,5,Sport-J,JJ,JC,D,DCfor back rest side and Doorarm rest a couple mm. interfere.SR-1,2for back rest side and Doorarm rest a couple mm. interfere,shoulder area and B-Pillar couple mm. interfere.SP-#,Racer shoulder area and B-Pillar couple mm. interfere.Trend-J,JJ,JC,D,DCfor back rest side and DoorArm Rest approximately 10mm interfere.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- D \/ DH \/ DV\u003cbr\u003e- DS \/ DSH \/ DSV \/ ES-V \/ DSE\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 \u0026amp; 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRecaro Seats (when used in conjunction with adapter-SL):\u003cbr\u003e- SR\u003cbr\u003e- SR2\u003cbr\u003e- SR3 \u003cbr\u003e- SR4\u003cbr\u003e- SR5\u003cbr\u003e- L# Series\u003cbr\u003emed Series (manually adjustable)\u003cbr\u003eRecaro Seats (when used in conjunction with adapter-SJ):\u003cbr\u003e- Style\u003cbr\u003e- Sport\u003cbr\u003e- Trend\u003cbr\u003e- AM19 (manually adjustable)\u003cbr\u003eSparco Seats (when used in conjunction with adapter-S0-2):\u003cbr\u003e- Monza\u003cbr\u003e- Sportivo\u003cbr\u003e- Speed\u003cbr\u003e- Sprint\u003cbr\u003e- Star\u003cbr\u003e- Torino II\u003cbr\u003eCobra\u003cbr\u003e- SFX\u003cbr\u003e- Cub \u003cbr\u003e- Roadstar\u003cbr\u003e- Clubman\u003cbr\u003e- Sprint\u003cbr\u003e- Club Sports\u003cbr\u003e- Daytona\u003cbr\u003e- Sidewinder\u003cbr\u003e- Imola 2\u003cbr\u003eD\u0026amp;W Seats (when used in conjunction with adapter-SL)\u003cbr\u003eSabelt Seats (when used in conjunction with adapter-S0-2):\u003cbr\u003e- Tiger\u003cbr\u003e- Fox \u003cbr\u003e- Crono\u003cbr\u003eBlitz\/Konig Seats (when used in conjunction with adapter-KB):\u003cbr\u003e- GT2\u003cbr\u003e- GT3\u003cbr\u003eCorbeau Seats\u003cbr\u003eStout Seats\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003e\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eHonda - Civic Type-R - EP3 (2003-2005) K20A\u003cbr\u003eHonda - Civic Type-R - EP3 (2001-2003) K20A\u003c!--split--\u003e","published_at":"2021-02-08T12:36:40+08:00","created_at":"2021-02-08T12:36:41+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2001","2002","2003","2004","2005","civic-type-r-ep3-2001-2005-na-k20a-i4","honda","left","recaro-japan","seat-rails","ws12"],"price":21168,"price_min":21168,"price_max":21168,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38013494886582,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2085.529.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Left - Honda Civic Type-R EP3\/EP3 (2001-2005)","public_title":null,"options":["Default Title"],"price":21168,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-honda-civic-type-r-ep3ep3-2001-2005-rzcrew.jpg?v=1710331026"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-honda-civic-type-r-ep3ep3-2001-2005-rzcrew.jpg?v=1710331026","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Left - Honda Civic Type-R EP3\/EP3 (2001-2005) - 2085.529.1 - Rzcrewgarage","id":23577998360758,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-honda-civic-type-r-ep3ep3-2001-2005-rzcrew.jpg?v=1710331026"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-honda-civic-type-r-ep3ep3-2001-2005-rzcrew.jpg?v=1710331026","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS:\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position:5mm lower than OEM seat.(Middle position of 3 position baseframe with ST-JJ)15mm to console from OEM seat.The length of slider is 70mm shorter than OEM seat on front side.The length of slider is 50mm longer than OEM seat on rear side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.(Except for Ferio)For non-side airbag car only.,2WD.\u003cbr\u003eSR-3,4,5,Sport-J,JJ,JC,D,DCfor back rest side and Doorarm rest a couple mm. interfere.SR-1,2for back rest side and Doorarm rest a couple mm. interfere,shoulder area and B-Pillar couple mm. interfere.SP-#,Racer shoulder area and B-Pillar couple mm. interfere.Trend-J,JJ,JC,D,DCfor back rest side and DoorArm Rest approximately 10mm interfere.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- D \/ DH \/ DV\u003cbr\u003e- DS \/ DSH \/ DSV \/ ES-V \/ DSE\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 \u0026amp; 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRecaro Seats (when used in conjunction with adapter-SL):\u003cbr\u003e- SR\u003cbr\u003e- SR2\u003cbr\u003e- SR3 \u003cbr\u003e- SR4\u003cbr\u003e- SR5\u003cbr\u003e- L# Series\u003cbr\u003emed Series (manually adjustable)\u003cbr\u003eRecaro Seats (when used in conjunction with adapter-SJ):\u003cbr\u003e- Style\u003cbr\u003e- Sport\u003cbr\u003e- Trend\u003cbr\u003e- AM19 (manually adjustable)\u003cbr\u003eSparco Seats (when used in conjunction with adapter-S0-2):\u003cbr\u003e- Monza\u003cbr\u003e- Sportivo\u003cbr\u003e- Speed\u003cbr\u003e- Sprint\u003cbr\u003e- Star\u003cbr\u003e- Torino II\u003cbr\u003eCobra\u003cbr\u003e- SFX\u003cbr\u003e- Cub \u003cbr\u003e- Roadstar\u003cbr\u003e- Clubman\u003cbr\u003e- Sprint\u003cbr\u003e- Club Sports\u003cbr\u003e- Daytona\u003cbr\u003e- Sidewinder\u003cbr\u003e- Imola 2\u003cbr\u003eD\u0026amp;W Seats (when used in conjunction with adapter-SL)\u003cbr\u003eSabelt Seats (when used in conjunction with adapter-S0-2):\u003cbr\u003e- Tiger\u003cbr\u003e- Fox \u003cbr\u003e- Crono\u003cbr\u003eBlitz\/Konig Seats (when used in conjunction with adapter-KB):\u003cbr\u003e- GT2\u003cbr\u003e- GT3\u003cbr\u003eCorbeau Seats\u003cbr\u003eStout Seats\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003e\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eHonda - Civic Type-R - EP3 (2003-2005) K20A\u003cbr\u003eHonda - Civic Type-R - EP3 (2001-2003) K20A\u003c!--split--\u003e"}

{"id":6252286869686,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Honda Civic Type-R EP3 (2001-2005)","handle":"recaro-japan-base-frame-seat-rail-standard-right-honda-civic-type-r-ep3-2001-2005-2085-529-2","description":"SPECIFICATIONS:\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position:5mm lower than OEM seat.(Middle position of 3 position baseframe with ST-JJ)15mm to console from OEM seat.The length of slider is 70mm shorter than OEM seat on front side.The length of slider is 50mm longer than OEM seat on rear side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.(Except for Ferio)For non-side airbag car only.,2WD.\u003cbr\u003eSR-3,4,5,Sport-J,JJ,JC,D,DCfor back rest side and Doorarm rest a couple mm. interfere.SR-1,2for back rest side and Doorarm rest a couple mm. interfere,shoulder area and B-Pillar couple mm. interfere.SP-#,Racer shoulder area and B-Pillar couple mm. interfere.Trend-J,JJ,JC,D,DCfor back rest side and DoorArm Rest approximately 10mm interfere.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- D \/ DH \/ DV\u003cbr\u003e- DS \/ DSH \/ DSV \/ ES-V \/ DSE\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 \u0026amp; 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRecaro Seats (when used in conjunction with adapter-SL):\u003cbr\u003e- SR\u003cbr\u003e- SR2\u003cbr\u003e- SR3 \u003cbr\u003e- SR4\u003cbr\u003e- SR5\u003cbr\u003e- L# Series\u003cbr\u003emed Series (manually adjustable)\u003cbr\u003eRecaro Seats (when used in conjunction with adapter-SJ):\u003cbr\u003e- Style\u003cbr\u003e- Sport\u003cbr\u003e- Trend\u003cbr\u003e- AM19 (manually adjustable)\u003cbr\u003eSparco Seats (when used in conjunction with adapter-S0-2):\u003cbr\u003e- Monza\u003cbr\u003e- Sportivo\u003cbr\u003e- Speed\u003cbr\u003e- Sprint\u003cbr\u003e- Star\u003cbr\u003e- Torino II\u003cbr\u003eCobra\u003cbr\u003e- SFX\u003cbr\u003e- Cub \u003cbr\u003e- Roadstar\u003cbr\u003e- Clubman\u003cbr\u003e- Sprint\u003cbr\u003e- Club Sports\u003cbr\u003e- Daytona\u003cbr\u003e- Sidewinder\u003cbr\u003e- Imola 2\u003cbr\u003eD\u0026amp;W Seats (when used in conjunction with adapter-SL)\u003cbr\u003eSabelt Seats (when used in conjunction with adapter-S0-2):\u003cbr\u003e- Tiger\u003cbr\u003e- Fox \u003cbr\u003e- Crono\u003cbr\u003eBlitz\/Konig Seats (when used in conjunction with adapter-KB):\u003cbr\u003e- GT2\u003cbr\u003e- GT3\u003cbr\u003eCorbeau Seats\u003cbr\u003eStout Seats\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003e\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eHonda - Civic Type-R - EP3 (2003-2005) K20A\u003cbr\u003eHonda - Civic Type-R - EP3 (2001-2003) K20A\u003c!--split--\u003e","published_at":"2021-02-08T12:36:43+08:00","created_at":"2021-02-08T12:36:43+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2001","2002","2003","2004","2005","civic-type-r-ep3-2001-2005-na-k20a-i4","honda","recaro-japan","right","seat-rails","ws12"],"price":21168,"price_min":21168,"price_max":21168,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38013494984886,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2085.529.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Honda Civic Type-R EP3 (2001-2005)","public_title":null,"options":["Default Title"],"price":21168,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-honda-civic-type-r-ep3-2001-2005-rzcrew.jpg?v=1710331024"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-honda-civic-type-r-ep3-2001-2005-rzcrew.jpg?v=1710331024","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Honda Civic Type-R EP3 (2001-2005) - 2085.529.2 - Rzcrewgarage","id":23577998655670,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-honda-civic-type-r-ep3-2001-2005-rzcrew.jpg?v=1710331024"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-honda-civic-type-r-ep3-2001-2005-rzcrew.jpg?v=1710331024","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS:\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position:5mm lower than OEM seat.(Middle position of 3 position baseframe with ST-JJ)15mm to console from OEM seat.The length of slider is 70mm shorter than OEM seat on front side.The length of slider is 50mm longer than OEM seat on rear side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.(Except for Ferio)For non-side airbag car only.,2WD.\u003cbr\u003eSR-3,4,5,Sport-J,JJ,JC,D,DCfor back rest side and Doorarm rest a couple mm. interfere.SR-1,2for back rest side and Doorarm rest a couple mm. interfere,shoulder area and B-Pillar couple mm. interfere.SP-#,Racer shoulder area and B-Pillar couple mm. interfere.Trend-J,JJ,JC,D,DCfor back rest side and DoorArm Rest approximately 10mm interfere.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- D \/ DH \/ DV\u003cbr\u003e- DS \/ DSH \/ DSV \/ ES-V \/ DSE\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 \u0026amp; 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRecaro Seats (when used in conjunction with adapter-SL):\u003cbr\u003e- SR\u003cbr\u003e- SR2\u003cbr\u003e- SR3 \u003cbr\u003e- SR4\u003cbr\u003e- SR5\u003cbr\u003e- L# Series\u003cbr\u003emed Series (manually adjustable)\u003cbr\u003eRecaro Seats (when used in conjunction with adapter-SJ):\u003cbr\u003e- Style\u003cbr\u003e- Sport\u003cbr\u003e- Trend\u003cbr\u003e- AM19 (manually adjustable)\u003cbr\u003eSparco Seats (when used in conjunction with adapter-S0-2):\u003cbr\u003e- Monza\u003cbr\u003e- Sportivo\u003cbr\u003e- Speed\u003cbr\u003e- Sprint\u003cbr\u003e- Star\u003cbr\u003e- Torino II\u003cbr\u003eCobra\u003cbr\u003e- SFX\u003cbr\u003e- Cub \u003cbr\u003e- Roadstar\u003cbr\u003e- Clubman\u003cbr\u003e- Sprint\u003cbr\u003e- Club Sports\u003cbr\u003e- Daytona\u003cbr\u003e- Sidewinder\u003cbr\u003e- Imola 2\u003cbr\u003eD\u0026amp;W Seats (when used in conjunction with adapter-SL)\u003cbr\u003eSabelt Seats (when used in conjunction with adapter-S0-2):\u003cbr\u003e- Tiger\u003cbr\u003e- Fox \u003cbr\u003e- Crono\u003cbr\u003eBlitz\/Konig Seats (when used in conjunction with adapter-KB):\u003cbr\u003e- GT2\u003cbr\u003e- GT3\u003cbr\u003eCorbeau Seats\u003cbr\u003eStout Seats\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003e\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eHonda - Civic Type-R - EP3 (2003-2005) K20A\u003cbr\u003eHonda - Civic Type-R - EP3 (2001-2003) K20A\u003c!--split--\u003e"}

{"id":1449613656161,"title":"Rzcrew Garage - 4-2-1 Super Circuit Header - Honda - Civic Type R EP3","handle":"rzcrew-garage-4-2-1-super-circuit-header-honda-civic-type-r-ep3-ep3-ex-hddc5-s001","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Garage\u003cbr\u003eReference Number: EX-HDDC5-S001\u003cbr\u003eExhaust Type: Header\u003cbr\u003eMaterial Used: Stainless Steel\u003cbr\u003e\u003cbr\u003eRzcrew Garage Super Circuit exhaust header are custom build to order with a perfect finish. Steadily hand crafted, this model features a Tuned length 4-2-1 with 1.6\" primary, 2.0\" secondary and 2.5\"pipes formation for better low-end torque without sacrificing higher end horsepower.All headers are precision hand Tig\/Argon welded and fully 304 stainless steel mandrel bent built for a longer life span.\u003cbr\u003eThis header has been proven to increase 11.72HP and 10.88Nm of torque on a stock K20A Engine.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003c!--split--\u003e","published_at":"2018-11-07T18:20:39+08:00","created_at":"2018-11-07T18:20:40+08:00","vendor":"Rzcrew Garage","type":"Catbacks - Exhaust Manifolds","tags":["2001","2002","2003","2004","2005","catbacks-exhaust-manifolds","civic-type-r-ep3-2001-2005-na-k20a-i4","EP3","exhaust","header","honda","rzcrew-garage","rzcrew-garage25","sg1","stainless-steel","ws120"],"price":68320,"price_min":68320,"price_max":68320,"available":true,"price_varies":false,"compare_at_price":85400,"compare_at_price_min":85400,"compare_at_price_max":85400,"compare_at_price_varies":false,"variants":[{"id":12475580645473,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"EX-HDDC5-S001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Garage - 4-2-1 Super Circuit Header - Honda - Civic Type R EP3","public_title":null,"options":["Default Title"],"price":68320,"weight":36000,"compare_at_price":85400,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/EX-HDDC5-S001_71dc37ea-8d96-4b8a-9d8b-7c2ee9acb483.jpg?v=1710168224"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/EX-HDDC5-S001_71dc37ea-8d96-4b8a-9d8b-7c2ee9acb483.jpg?v=1710168224","options":["Title"],"media":[{"alt":"Rzcrew Garage - 4-2-1 Super Circuit Header - Honda - Civic Type R EP3 - EP3 - EX-HDDC5-S001","id":25881963921590,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/EX-HDDC5-S001_71dc37ea-8d96-4b8a-9d8b-7c2ee9acb483.jpg?v=1710168224"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/EX-HDDC5-S001_71dc37ea-8d96-4b8a-9d8b-7c2ee9acb483.jpg?v=1710168224","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Garage\u003cbr\u003eReference Number: EX-HDDC5-S001\u003cbr\u003eExhaust Type: Header\u003cbr\u003eMaterial Used: Stainless Steel\u003cbr\u003e\u003cbr\u003eRzcrew Garage Super Circuit exhaust header are custom build to order with a perfect finish. Steadily hand crafted, this model features a Tuned length 4-2-1 with 1.6\" primary, 2.0\" secondary and 2.5\"pipes formation for better low-end torque without sacrificing higher end horsepower.All headers are precision hand Tig\/Argon welded and fully 304 stainless steel mandrel bent built for a longer life span.\u003cbr\u003eThis header has been proven to increase 11.72HP and 10.88Nm of torque on a stock K20A Engine.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003c!--split--\u003e"}

{"id":4593319084129,"title":"Rzcrew Racing - Toyota 4AGE 20V ITB Billet Runner Adaptor Plate - Honda - Civic K20A\/K20Z","handle":"rzcrew-racing-toyota-4age-20v-itb-billet-runner-adaptor-plate-honda-civic-k20a-k20z","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003eReference Number: RZ-RA-4AGE-K20A\/K20Z\u003cbr\u003eIntake Type: 4AGE ITB Adaptor Kit\u003cbr\u003e\u003cbr\u003eIf you want to Install 4A-GE 20V Silver Top Individual Throttle Bodies in your Honda Civic K20A\/K20Z, then this ITB Adaptor Plate is the perfect solution.Rzcrew Racing Billet Individual throttle body adapter, also called Runner, these are calculated to make the installation easy and keeping the ITB Mechanism closed to the head to ensure perfect flow and less turbulence. The shorter flow's travel also enhances engine response and Torque. It allows the installation of the 4AGE 20V Silver Top ( Hear shape intake) or 4AGE 20V Black top pattern ( Round shape)to your engine smoothly. Please note that all Rzcrew Racing Runners comes with 4 Vaccum output and a vaccum manifold for ease of Installation.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eImportant Note:\u003cbr\u003e\nFitting ITBs required higher compressions as well as up-rated camshafts to ensure a proper Horse power and Torque Gain, Fitting it on a stock engine is do-able yet not the best to maximise your setup.\u003cbr\u003eAll our Individual Throttle bodies are actionned by cable and you may be required to convert your pedal and mechanism if using EThrottle. Modification on your accelerator cable may be needed in certain case.\u003cbr\u003e\u003cbr\u003e It may not be available for your car but feel free to ask, we will be glad to customize something for you.\u003cbr\u003e\u003cbr\u003e Please note that this product is made on order and take a minimum of 1 month production time!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAccord Euro R | CL7 | 2002-2008 | NA | K20A | I4\u003cbr\u003eAccord | CL8 | 2002-2005 | NA | K20A | I4\u003cbr\u003eAccord Wagon | CM1 | 2004-2005 | NA | K20A | I4\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003cbr\u003eCR-V | RD4 | 2002-2006 | NA | K20A | I4\u003cbr\u003eCR-V | RD5 | 2002-2006 | NA | K20A | I4\u003cbr\u003eEdix | BE3 | 2004-2006 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Zenki | 2002-2004 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Kouki | 2004-2006 | NA | K20A | I4\u003cbr\u003eIntegra | DC5 | 2002-2006 | NA | K20Z1 | I4\u003c!--split--\u003e","published_at":"2020-04-28T12:41:49+08:00","created_at":"2020-04-28T12:41:50+08:00","vendor":"Rzcrew Racing","type":"Individual Throttle Bodies","tags":["2001","2002","2003","2004","2005","2006","accord-cl8-2002-2005-na-k20a-i4","accord-euro-r-cl7-2002-2008-na-k20a-i4","accord-wagon-cm1-2004-2005-na-k20a-i4","civic-type-r-ep3-2001-2005-na-k20a-i4","cr-v-rd4-2002-2006-na-k20a-i4","cr-v-rd5-2002-2006-na-k20a-i4","edix-be3-2004-2006-na-k20a-i4","honda","individual-throttle-bodies","intake","integra-dc5-2002-2006-na-k20z1-i4","integra-type-r-dc5r-kouki-2004-2006-na-k20a-i4","integra-type-r-dc5r-zenki-2002-2004-na-k20a-i4","rzcrew-garage","rzcrew-racing","sg1","ws125"],"price":26025,"price_min":26025,"price_max":26025,"available":true,"price_varies":false,"compare_at_price":34700,"compare_at_price_min":34700,"compare_at_price_max":34700,"compare_at_price_varies":false,"variants":[{"id":37163129929910,"title":"Heart Shape","option1":"Heart Shape","option2":null,"option3":null,"sku":"RZ-RA-4AGE-K20A\/K20Z","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Toyota 4AGE 20V ITB Billet Runner Adaptor Plate - Honda - Civic K20A\/K20Z - Heart Shape","public_title":"Heart Shape","options":["Heart Shape"],"price":26025,"weight":3000,"compare_at_price":34700,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":37163129962678,"title":"Round Shape","option1":"Round Shape","option2":null,"option3":null,"sku":"RZ-RA-4AGE-K20A\/K20Z-BT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Toyota 4AGE 20V ITB Billet Runner Adaptor Plate - Honda - Civic K20A\/K20Z - Round Shape","public_title":"Round Shape","options":["Round Shape"],"price":26025,"weight":3000,"compare_at_price":34700,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_ITB_Runner_4age_0fa059af-c5ce-46a9-875c-7e1d803f6c4d.jpg?v=1710191546"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_ITB_Runner_4age_0fa059af-c5ce-46a9-875c-7e1d803f6c4d.jpg?v=1710191546","options":["Flange Type"],"media":[{"alt":"Rzcrew Racing - Toyota 4AGE 20V ITB Billet Runner Adaptor Plate - Honda - Civic K20A\/K20Z","id":22741573107894,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_ITB_Runner_4age_0fa059af-c5ce-46a9-875c-7e1d803f6c4d.jpg?v=1710191546"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_ITB_Runner_4age_0fa059af-c5ce-46a9-875c-7e1d803f6c4d.jpg?v=1710191546","width":1600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003eReference Number: RZ-RA-4AGE-K20A\/K20Z\u003cbr\u003eIntake Type: 4AGE ITB Adaptor Kit\u003cbr\u003e\u003cbr\u003eIf you want to Install 4A-GE 20V Silver Top Individual Throttle Bodies in your Honda Civic K20A\/K20Z, then this ITB Adaptor Plate is the perfect solution.Rzcrew Racing Billet Individual throttle body adapter, also called Runner, these are calculated to make the installation easy and keeping the ITB Mechanism closed to the head to ensure perfect flow and less turbulence. The shorter flow's travel also enhances engine response and Torque. It allows the installation of the 4AGE 20V Silver Top ( Hear shape intake) or 4AGE 20V Black top pattern ( Round shape)to your engine smoothly. Please note that all Rzcrew Racing Runners comes with 4 Vaccum output and a vaccum manifold for ease of Installation.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eImportant Note:\u003cbr\u003e\nFitting ITBs required higher compressions as well as up-rated camshafts to ensure a proper Horse power and Torque Gain, Fitting it on a stock engine is do-able yet not the best to maximise your setup.\u003cbr\u003eAll our Individual Throttle bodies are actionned by cable and you may be required to convert your pedal and mechanism if using EThrottle. Modification on your accelerator cable may be needed in certain case.\u003cbr\u003e\u003cbr\u003e It may not be available for your car but feel free to ask, we will be glad to customize something for you.\u003cbr\u003e\u003cbr\u003e Please note that this product is made on order and take a minimum of 1 month production time!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAccord Euro R | CL7 | 2002-2008 | NA | K20A | I4\u003cbr\u003eAccord | CL8 | 2002-2005 | NA | K20A | I4\u003cbr\u003eAccord Wagon | CM1 | 2004-2005 | NA | K20A | I4\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003cbr\u003eCR-V | RD4 | 2002-2006 | NA | K20A | I4\u003cbr\u003eCR-V | RD5 | 2002-2006 | NA | K20A | I4\u003cbr\u003eEdix | BE3 | 2004-2006 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Zenki | 2002-2004 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Kouki | 2004-2006 | NA | K20A | I4\u003cbr\u003eIntegra | DC5 | 2002-2006 | NA | K20Z1 | I4\u003c!--split--\u003e"}

{"id":1945277825121,"title":"Rzcrew Racing Billet Individual Throttle Bodies kit - Honda - K20A\/K20Z - Cable Throttle Body","handle":"rzcrew-garage-billet-individual-throttle-bodies-kit-honda-k20a-k20z-cable-throttle-body","description":"\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003eReference Number: BITB-H-KC-34mm-SS\u003cbr\u003eIntake Type: ITB Kit\u003cbr\u003ePlease choose Throttle diameter during check out:\u003cbr\u003e45mm\u003cbr\u003e48mm\u003cbr\u003e50mm\u003cbr\u003e52mm\u003cbr\u003e55mm\u003c\/p\u003e\n\u003cp\u003eITB Kit will come without water passage by default, let us know in the checkout notes if you want them with the water passage on the flange\u003cbr\u003e\u003cbr\u003eWe have now added the option to choose no trumpet and purchase Our Titanium Velocity stack for your kit. Please refer to this link: \u003ca href=\"url\"\u003ehttps:\/\/rzcrewgarage.com\/products\/rzcrew-racing-titanium-velocity-stack-set-trumpet-for-rzcrew-racing-indiviual-throttle-body-itb\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003eCustom diameter available on request. Cost may vary. Please contact us.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecial Note about ITB on this particular car model:\u003c\/strong\u003e\u003cbr\u003eMaximum Recommended Trumpet Length: 75mmThis is the third version of our Individual Throttle Body design, introducing a fully customisable linkage system for perfect idle tuning.\u003cbr\u003e\u003cbr\u003eThe New ITB V3 feature:\u003cbr\u003e\u003cbr\u003e*New multidirectional linkage assembly uses Japanese-made bearings for a smooth throttle response. The new linkage system allows for individual adjustment of each throttle plate individually for the precise idle fine tuning.\u003cbr\u003e*The introduction of a new CNC Machined Titanium shaft avoids any distortion due to wear and tear, and keeps the assembly light for a great pedal feel.\u003cbr\u003e*Each throttle body flap is now individually customised to each throttle body for perfect fitment, preventing any leak.\u003cbr\u003e*This new system also allows us to machine 55mm throttle body opening for the most hardcore setups.\u003cbr\u003e*Billet Individual throttle body adapter, also called Runner, these are calculated to make the installation easy and keeping the ITB Mechanism closed to the head to ensure perfect flow and less turbulence. The shorter flow's travel also enhances engine response and Torque.\u003cbr\u003e* Billet ITB system. Our ITB are machined in one piece of billet aluminum on high precision CNC Machine to ensure perfect fitting and flow. Fully mounted on ball bearing to get a smooth pedal feel and perfect air delivery in each cylinder. Each Throttle plate are manufactured in copper to avoid any sticky feeling under high heat. Throttle Diameter may Vary depending on engine model, we usually propose 3 different diameters yet you can contact us for any design. The Throttle body diameter are listed on the specs so let us know during time of ordering.\u003cbr\u003eAnodisation are also available on request for the ITB Body. If you want to make your engine bay shines, we propose 8 different colours to match your style! Please check the picture and let us know during checkout. ( default colour is silver)\u003cbr\u003eEach Throttle plates are commanded by a single mechanism making the hidling tuning of each cylinder a breeze and avoiding chaotic hidling. * Teflon gaskets are included between the runner and the itb as well as the trumpet to ensure low heat conductivity.\u003cbr\u003e* Custom lenght Trumpet. It is important to choose the right trumpet lenght depending on your application. For higher peak power we recommend shorter Trumpet lenght. For Torque, we recommend longer lenght. You can choose the appropriate lenght in our option menu on the right. Certain engine responses are different so feel free to enquire, we will ba glad to help you.\u003cbr\u003e\u003cbr\u003e* Vaccum Box is included, get all your vaccum set at once and link it to your brake booster and other encilliaries. It also includes all billet fitting with different diameter to get it linked to your vaccum circuit promptly. Please note that vaccum hoses are not included in this kit.\u003cbr\u003e\u003cbr\u003eRzcrew Garage ITB are modular. They follow the same bolt pattern as our Airstream Billet Manifold, with that in mind you can easily upgrade your Airstream billet Manifold to ITB or purchase the intake manifold box separetly if you wish to run an air filter on your ITB setup.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSee them in Action:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIn December 2019, we flew to France to meet our good friends at CRTUNE, the mission was simple: Dyno and test our prototype. Their K20A Eg6 is already quite a beast but well power is never enough. Their setup is the following:\u003cbr\u003e*DC5 K20A\u003cbr\u003eStock Compression Ratio\u003cbr\u003eDrag cartel 2.2 Camshafts\u003cbr\u003eDry Sump setup\u003cbr\u003eExhaust header and catback 2.5\"\u003cbr\u003eAdding our Itb to the mix made 278HP and 267Nm Torque. Video and pictures Below!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/uMa-hxTbHPE\" width=\"750\" height=\"422\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003cbr\u003eImportant Note:\u003cbr\u003eOur system follows the stock Throttle position sensor for ease of installation, please note that you will need a standalone ECU for starting you car and tuning it properly.We highly recommend a professional tuner to do the job and install them.\u003cbr\u003eFitting ITBs required higher compressions as well as up-rated camshafts to ensure a proper Horse power and Torque Gain, Fitting it on a stock engine is do-able yet not the best to maximise your setup.\u003cbr\u003eAll our Individual Throttle bodies are actionned by cable and you may be required to convert your pedal and mechanism if using EThrottle. Modification on your accelerator cable may be needed in certain case.\u003cbr\u003e\u003cbr\u003eIt may not be available for your car but feel free to ask, we will be glad to customize something for you.\u003cbr\u003e\u003cbr\u003ePlease note that this product is made on order and take a minimum of 1 month production time!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003c\/p\u003e\n\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAccord Euro R | CL7 | 2002-2008 | NA | K20A | I4\u003cbr\u003eAccord | CL8 | 2002-2005 | NA | K20A | I4\u003cbr\u003eAccord Wagon | CM1 | 2004-2005 | NA | K20A | I4\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003cbr\u003eCR-V | RD4 | 2002-2006 | NA | K20A | I4\u003cbr\u003eCR-V | RD5 | 2002-2006 | NA | K20A | I4\u003cbr\u003eEdix | BE3 | 2004-2006 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Zenki | 2002-2004 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Kouki | 2004-2006 | NA | K20A | I4\u003cbr\u003eIntegra | DC5 | 2002-2006 | NA | K20Z1 | I4\u003c!--split--\u003e","published_at":"2019-01-28T13:56:28+08:00","created_at":"2019-01-28T13:56:35+08:00","vendor":"Rzcrew Racing","type":"Individual Throttle Bodies","tags":["2001","2002","2003","2004","2005","2006","accord-cl8-2002-2005-na-k20a-i4","accord-euro-r-cl7-2002-2008-na-k20a-i4","accord-wagon-cm1-2004-2005-na-k20a-i4","civic-type-r-ep3-2001-2005-na-k20a-i4","cr-v-rd4-2002-2006-na-k20a-i4","cr-v-rd5-2002-2006-na-k20a-i4","edix-be3-2004-2006-na-k20a-i4","honda","individual-throttle-bodies","intake","integra-dc5-2002-2006-na-k20z1-i4","integra-type-r-dc5r-kouki-2004-2006-na-k20a-i4","integra-type-r-dc5r-zenki-2002-2004-na-k20a-i4","rzcrew-garage","rzcrew-racing","sg1","ws130"],"price":138810,"price_min":138810,"price_max":160160,"available":true,"price_varies":true,"compare_at_price":198300,"compare_at_price_min":198300,"compare_at_price_max":228800,"compare_at_price_varies":true,"variants":[{"id":43308360827062,"title":"40mm \/ Raw (Silver) \/ Raw (Silver)","option1":"40mm","option2":"Raw (Silver)","option3":"Raw (Silver)","sku":"BITB-H-KC-40mm-SS","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Honda - K20A\/K20Z - Cable Throttle Body - 40mm \/ Raw (Silver) \/ Raw (Silver)","public_title":"40mm \/ Raw (Silver) \/ Raw (Silver)","options":["40mm","Raw (Silver)","Raw (Silver)"],"price":147910,"weight":13000,"compare_at_price":211300,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43308360859830,"title":"40mm \/ Raw (Silver) \/ Other Colour","option1":"40mm","option2":"Raw (Silver)","option3":"Other Colour","sku":"BITB-H-KC-40mm-SC","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Honda - K20A\/K20Z - Cable Throttle Body - 40mm \/ Raw (Silver) \/ Other Colour","public_title":"40mm \/ Raw (Silver) \/ Other Colour","options":["40mm","Raw (Silver)","Other Colour"],"price":152950,"weight":13000,"compare_at_price":218500,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43308360892598,"title":"40mm \/ Other Colour \/ Raw (Silver)","option1":"40mm","option2":"Other Colour","option3":"Raw (Silver)","sku":"BITB-H-KC-40mm-CS","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Honda - K20A\/K20Z - Cable Throttle Body - 40mm \/ Other Colour \/ Raw (Silver)","public_title":"40mm \/ Other Colour \/ Raw (Silver)","options":["40mm","Other Colour","Raw (Silver)"],"price":152950,"weight":13000,"compare_at_price":218500,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43308360925366,"title":"40mm \/ Other Colour \/ Other Colour","option1":"40mm","option2":"Other Colour","option3":"Other Colour","sku":"BITB-H-KC-40mm-CC","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Honda - K20A\/K20Z - Cable Throttle Body - 40mm \/ Other Colour \/ Other Colour","public_title":"40mm \/ Other Colour \/ Other Colour","options":["40mm","Other Colour","Other Colour"],"price":157990,"weight":13000,"compare_at_price":225700,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480677650529,"title":"45mm \/ Raw (Silver) \/ Raw (Silver)","option1":"45mm","option2":"Raw (Silver)","option3":"Raw (Silver)","sku":"BITB-H-KC-45mm-SS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Honda - K20A\/K20Z - Cable Throttle Body - 45mm \/ Raw (Silver) \/ Raw (Silver)","public_title":"45mm \/ Raw (Silver) \/ Raw (Silver)","options":["45mm","Raw (Silver)","Raw (Silver)"],"price":147910,"weight":13000,"compare_at_price":211300,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480677683297,"title":"45mm \/ Raw (Silver) \/ Other Colour","option1":"45mm","option2":"Raw (Silver)","option3":"Other Colour","sku":"BITB-H-KC-45mm-SC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Honda - K20A\/K20Z - Cable Throttle Body - 45mm \/ Raw (Silver) \/ Other Colour","public_title":"45mm \/ Raw (Silver) \/ Other Colour","options":["45mm","Raw (Silver)","Other Colour"],"price":152950,"weight":13000,"compare_at_price":218500,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480677716065,"title":"45mm \/ Other Colour \/ Raw (Silver)","option1":"45mm","option2":"Other Colour","option3":"Raw (Silver)","sku":"BITB-H-KC-45mm-CS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Honda - K20A\/K20Z - Cable Throttle Body - 45mm \/ Other Colour \/ Raw (Silver)","public_title":"45mm \/ Other Colour \/ Raw (Silver)","options":["45mm","Other Colour","Raw (Silver)"],"price":152950,"weight":13000,"compare_at_price":218500,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480677748833,"title":"45mm \/ Other Colour \/ Other Colour","option1":"45mm","option2":"Other Colour","option3":"Other Colour","sku":"BITB-H-KC-45mm-CC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Honda - K20A\/K20Z - Cable Throttle Body - 45mm \/ Other Colour \/ Other Colour","public_title":"45mm \/ Other Colour \/ Other Colour","options":["45mm","Other Colour","Other Colour"],"price":157990,"weight":13000,"compare_at_price":225700,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480677781601,"title":"55mm \/ Raw (Silver) \/ Raw (Silver)","option1":"55mm","option2":"Raw (Silver)","option3":"Raw (Silver)","sku":"BITB-H-KC-55mm-SS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Honda - K20A\/K20Z - Cable Throttle Body - 55mm \/ Raw (Silver) \/ Raw (Silver)","public_title":"55mm \/ Raw (Silver) \/ Raw (Silver)","options":["55mm","Raw (Silver)","Raw (Silver)"],"price":147910,"weight":13000,"compare_at_price":211300,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480677814369,"title":"55mm \/ Raw (Silver) \/ Other Colour","option1":"55mm","option2":"Raw (Silver)","option3":"Other Colour","sku":"BITB-H-KC-55mm-SC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Honda - K20A\/K20Z - Cable Throttle Body - 55mm \/ Raw (Silver) \/ Other Colour","public_title":"55mm \/ Raw (Silver) \/ Other Colour","options":["55mm","Raw (Silver)","Other Colour"],"price":152950,"weight":13000,"compare_at_price":218500,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480677847137,"title":"55mm \/ Other Colour \/ Raw (Silver)","option1":"55mm","option2":"Other Colour","option3":"Raw (Silver)","sku":"BITB-H-KC-55mm-CS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Honda - K20A\/K20Z - Cable Throttle Body - 55mm \/ Other Colour \/ Raw (Silver)","public_title":"55mm \/ Other Colour \/ Raw (Silver)","options":["55mm","Other Colour","Raw (Silver)"],"price":152950,"weight":13000,"compare_at_price":218500,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480677879905,"title":"55mm \/ Other Colour \/ Other Colour","option1":"55mm","option2":"Other Colour","option3":"Other Colour","sku":"BITB-H-KC-55mm-CC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Honda - K20A\/K20Z - Cable Throttle Body - 55mm \/ Other Colour \/ Other Colour","public_title":"55mm \/ Other Colour \/ Other Colour","options":["55mm","Other Colour","Other Colour"],"price":157990,"weight":13000,"compare_at_price":225700,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480677912673,"title":"65mm \/ Raw (Silver) \/ Raw (Silver)","option1":"65mm","option2":"Raw (Silver)","option3":"Raw (Silver)","sku":"BITB-H-KC-65mm-SS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Honda - K20A\/K20Z - Cable Throttle Body - 65mm \/ Raw (Silver) \/ Raw (Silver)","public_title":"65mm \/ Raw (Silver) \/ Raw (Silver)","options":["65mm","Raw (Silver)","Raw (Silver)"],"price":147910,"weight":13000,"compare_at_price":211300,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480677945441,"title":"65mm \/ Raw (Silver) \/ Other Colour","option1":"65mm","option2":"Raw (Silver)","option3":"Other Colour","sku":"BITB-H-KC-65mm-SC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Honda - K20A\/K20Z - Cable Throttle Body - 65mm \/ Raw (Silver) \/ Other Colour","public_title":"65mm \/ Raw (Silver) \/ Other Colour","options":["65mm","Raw (Silver)","Other Colour"],"price":152950,"weight":13000,"compare_at_price":218500,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480677978209,"title":"65mm \/ Other Colour \/ Raw (Silver)","option1":"65mm","option2":"Other Colour","option3":"Raw (Silver)","sku":"BITB-H-KC-65mm-CS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Honda - K20A\/K20Z - Cable Throttle Body - 65mm \/ Other Colour \/ Raw (Silver)","public_title":"65mm \/ Other Colour \/ Raw (Silver)","options":["65mm","Other Colour","Raw (Silver)"],"price":152950,"weight":13000,"compare_at_price":218500,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480678010977,"title":"65mm \/ Other Colour \/ Other Colour","option1":"65mm","option2":"Other Colour","option3":"Other Colour","sku":"BITB-H-KC-65mm-CC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Honda - K20A\/K20Z - Cable Throttle Body - 65mm \/ Other Colour \/ Other Colour","public_title":"65mm \/ Other Colour \/ Other Colour","options":["65mm","Other Colour","Other Colour"],"price":157990,"weight":13000,"compare_at_price":225700,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480678043745,"title":"75mm \/ Raw (Silver) \/ Raw (Silver)","option1":"75mm","option2":"Raw (Silver)","option3":"Raw (Silver)","sku":"BITB-H-KC-75mm-SS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Honda - K20A\/K20Z - Cable Throttle Body - 75mm \/ Raw (Silver) \/ Raw (Silver)","public_title":"75mm \/ Raw (Silver) \/ Raw (Silver)","options":["75mm","Raw (Silver)","Raw (Silver)"],"price":147910,"weight":13000,"compare_at_price":211300,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480678076513,"title":"75mm \/ Raw (Silver) \/ Other Colour","option1":"75mm","option2":"Raw (Silver)","option3":"Other Colour","sku":"BITB-H-KC-75mm-SC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Honda - K20A\/K20Z - Cable Throttle Body - 75mm \/ Raw (Silver) \/ Other Colour","public_title":"75mm \/ Raw (Silver) \/ Other Colour","options":["75mm","Raw (Silver)","Other Colour"],"price":152950,"weight":13000,"compare_at_price":218500,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480678109281,"title":"75mm \/ Other Colour \/ Raw (Silver)","option1":"75mm","option2":"Other Colour","option3":"Raw (Silver)","sku":"BITB-H-KC-75mm-CS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Honda - K20A\/K20Z - Cable Throttle Body - 75mm \/ Other Colour \/ Raw (Silver)","public_title":"75mm \/ Other Colour \/ Raw (Silver)","options":["75mm","Other Colour","Raw (Silver)"],"price":152950,"weight":13000,"compare_at_price":218500,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480678142049,"title":"75mm \/ Other Colour \/ Other Colour","option1":"75mm","option2":"Other Colour","option3":"Other Colour","sku":"BITB-H-KC-75mm-CC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Honda - K20A\/K20Z - Cable Throttle Body - 75mm \/ Other Colour \/ Other Colour","public_title":"75mm \/ Other Colour \/ Other Colour","options":["75mm","Other Colour","Other Colour"],"price":157990,"weight":13000,"compare_at_price":225700,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480678174817,"title":"95mm \/ Raw (Silver) \/ Raw (Silver)","option1":"95mm","option2":"Raw (Silver)","option3":"Raw (Silver)","sku":"BITB-H-KC-95mm-SS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Honda - K20A\/K20Z - Cable Throttle Body - 95mm \/ Raw (Silver) \/ Raw (Silver)","public_title":"95mm \/ Raw (Silver) \/ Raw (Silver)","options":["95mm","Raw (Silver)","Raw (Silver)"],"price":150010,"weight":13000,"compare_at_price":214300,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480678207585,"title":"95mm \/ Raw (Silver) \/ Other Colour","option1":"95mm","option2":"Raw (Silver)","option3":"Other Colour","sku":"BITB-H-KC-95mm-SC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Honda - K20A\/K20Z - Cable Throttle Body - 95mm \/ Raw (Silver) \/ Other Colour","public_title":"95mm \/ Raw (Silver) \/ Other Colour","options":["95mm","Raw (Silver)","Other Colour"],"price":155050,"weight":13000,"compare_at_price":221500,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480678240353,"title":"95mm \/ Other Colour \/ Raw (Silver)","option1":"95mm","option2":"Other Colour","option3":"Raw (Silver)","sku":"BITB-H-KC-95mm-CS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Honda - K20A\/K20Z - Cable Throttle Body - 95mm \/ Other Colour \/ Raw (Silver)","public_title":"95mm \/ Other Colour \/ Raw (Silver)","options":["95mm","Other Colour","Raw (Silver)"],"price":155050,"weight":13000,"compare_at_price":221500,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480678273121,"title":"95mm \/ Other Colour \/ Other Colour","option1":"95mm","option2":"Other Colour","option3":"Other Colour","sku":"BITB-H-KC-95mm-CC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Honda - K20A\/K20Z - Cable Throttle Body - 95mm \/ Other Colour \/ Other Colour","public_title":"95mm \/ Other Colour \/ Other Colour","options":["95mm","Other Colour","Other Colour"],"price":160160,"weight":13000,"compare_at_price":228800,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480678305889,"title":"105mm \/ Raw (Silver) \/ Raw (Silver)","option1":"105mm","option2":"Raw (Silver)","option3":"Raw (Silver)","sku":"BITB-H-KC-105mm-SS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Honda - K20A\/K20Z - Cable Throttle Body - 105mm \/ Raw (Silver) \/ Raw (Silver)","public_title":"105mm \/ Raw (Silver) \/ Raw (Silver)","options":["105mm","Raw (Silver)","Raw (Silver)"],"price":150010,"weight":13000,"compare_at_price":214300,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480678338657,"title":"105mm \/ Raw (Silver) \/ Other Colour","option1":"105mm","option2":"Raw (Silver)","option3":"Other Colour","sku":"BITB-H-KC-105mm-SC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Honda - K20A\/K20Z - Cable Throttle Body - 105mm \/ Raw (Silver) \/ Other Colour","public_title":"105mm \/ Raw (Silver) \/ Other Colour","options":["105mm","Raw (Silver)","Other Colour"],"price":155050,"weight":13000,"compare_at_price":221500,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480678371425,"title":"105mm \/ Other Colour \/ Raw (Silver)","option1":"105mm","option2":"Other Colour","option3":"Raw (Silver)","sku":"BITB-H-KC-105mm-CS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Honda - K20A\/K20Z - Cable Throttle Body - 105mm \/ Other Colour \/ Raw (Silver)","public_title":"105mm \/ Other Colour \/ Raw (Silver)","options":["105mm","Other Colour","Raw (Silver)"],"price":155050,"weight":13000,"compare_at_price":221500,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":18480678404193,"title":"105mm \/ Other Colour \/ Other Colour","option1":"105mm","option2":"Other Colour","option3":"Other Colour","sku":"BITB-H-KC-105mm-CC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Honda - K20A\/K20Z - Cable Throttle Body - 105mm \/ Other Colour \/ Other Colour","public_title":"105mm \/ Other Colour \/ Other Colour","options":["105mm","Other Colour","Other Colour"],"price":160160,"weight":13000,"compare_at_price":228800,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42201031278774,"title":"No Trumpet \/ Raw (Silver) \/ N\/A","option1":"No Trumpet","option2":"Raw (Silver)","option3":"N\/A","sku":"BITB-H-KC-No Trumpet-SS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Honda - K20A\/K20Z - Cable Throttle Body - No Trumpet \/ Raw (Silver) \/ N\/A","public_title":"No Trumpet \/ Raw (Silver) \/ N\/A","options":["No Trumpet","Raw (Silver)","N\/A"],"price":138810,"weight":11000,"compare_at_price":198300,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42201031311542,"title":"No Trumpet \/ Other Colour \/ N\/A","option1":"No Trumpet","option2":"Other Colour","option3":"N\/A","sku":"BITB-H-KC-No Trumpet-CS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Individual Throttle Bodies kit - Honda - K20A\/K20Z - Cable Throttle Body - No Trumpet \/ Other Colour \/ N\/A","public_title":"No Trumpet \/ Other Colour \/ N\/A","options":["No Trumpet","Other Colour","N\/A"],"price":143850,"weight":11000,"compare_at_price":205500,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/ITB02_fbdbfd41-5a10-4798-8715-fff9c8b85bc1.jpg?v=1710168949","\/\/rzcrewgarage.com\/cdn\/shop\/products\/ITB07_14599236-32ae-4d57-b6ce-4632e9891d30.jpg?v=1710168955","\/\/rzcrewgarage.com\/cdn\/shop\/products\/ITB01.jpg?v=1710168960","\/\/rzcrewgarage.com\/cdn\/shop\/products\/RZCREW_Racing_ITB_K-series_3.jpg?v=1710168962","\/\/rzcrewgarage.com\/cdn\/shop\/products\/RZCREW_Racing_ITB_K-series_2_3fbcef51-1a50-462d-84fa-f85015441dd4.jpg?v=1710168965","\/\/rzcrewgarage.com\/cdn\/shop\/products\/RZCREW_Racing_ITB_K-series_b69a1d8e-5102-42d2-be0b-ea8e0e5759fc.jpg?v=1710168967","\/\/rzcrewgarage.com\/cdn\/shop\/products\/RZCREW_Racing_ITB_K-series_5_747a2e0c-5c32-434c-8f19-7f14a7fb9940.jpg?v=1710168970","\/\/rzcrewgarage.com\/cdn\/shop\/products\/RZCREW_Racing_ITB_K-series_4_05e639b6-eb67-489b-82cd-f7f910313589.jpg?v=1710168973","\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2020-10-29_at_16.03.16_1_78b6fa9d-d296-4556-a790-84f369492cc1.jpg?v=1710168975","\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Individual_Throttle_body_5_9bbf3799-7dc2-4e56-9b70-2a0633a25b28.jpg?v=1710168977","\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Individual_Throttle_body_3_188c3b96-5a55-4fd6-8a73-a503b5b9ec84.jpg?v=1710168980","\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Individual_Throttle_body_4_1e5c44c1-76d4-4971-9e9e-4b04aa0b9248.jpg?v=1710168982","\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Individual_Throttle_body_5_9c9c7aeb-0d5d-473d-a723-6aca400c38b7.jpg?v=1710168985","\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew_racing_itb_on_2ZZGE_a9e28886-16b4-48b3-bc96-5da034802aeb.png?v=1710168988","\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Racing_ITB_mounted_on_2ZZ-GE_Engine_7a114f06-ca5b-4a96-83d4-67e4b1859ca6.png?v=1710168990","\/\/rzcrewgarage.com\/cdn\/shop\/products\/Runners-S2000-01_abe43c48-35fa-431f-8216-271051ddaac4.jpg?v=1710168993","\/\/rzcrewgarage.com\/cdn\/shop\/products\/RZ-VM-SC_bac8f47f-118a-442a-a9bb-2c96f9216d6a.jpg?v=1710168995","\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrewgarage_ITB_Gasket_2a686b91-95ba-46c9-bd27-656b54ef77c4.jpg?v=1710168997","\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrewgarage_Itb_Trumpet_8f2af4f4-9179-49dc-9bcd-c106aac4bf41.jpg?v=1710168999","\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.21_0731fe9a-9fca-46ec-9bec-5eff28f82ca2.jpg?v=1710169001","\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.20_0718ed5b-e2cd-4b0b-b2ca-94c4252e60a9.jpg?v=1710169003","\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.20_1_ede60f3e-961b-4158-b5c1-53da91c38462.jpg?v=1710169005","\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.20_2_5b82755d-2c7c-4078-868e-d0232b5f280e.jpg?v=1710169007","\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2018-12-13_at_15.16.37_f50f1e7a-4506-4c41-983c-aaeb34b69ece.jpg?v=1710169009","\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2023-04-13_at_17.20.56_7433d659-517f-4867-abf2-60e8cbf0a388.jpg?v=1710169011","\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2023-04-13_at_17.20.55_b413c92d-cb9c-4d05-81e2-b731e16f12db.jpg?v=1710169014","\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2023-04-13_at_17.20.55_d4ef5342-5f27-4b7b-9ab5-26ec50f3f261.jpg?v=1710169016","\/\/rzcrewgarage.com\/cdn\/shop\/products\/Anodisation-Colours_0159841c-ffee-44d5-b797-b4bebe0fc8cb.jpg?v=1710169018"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/ITB02_fbdbfd41-5a10-4798-8715-fff9c8b85bc1.jpg?v=1710168949","options":["Trumpet Length:","ITB Body Colour:","Trumpet Colour:"],"media":[{"alt":"Rzcrew Racing Billet ITB Kit for Honda Civic K20A\/K20Z","id":26122219749558,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2048,"width":2048,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/ITB02_fbdbfd41-5a10-4798-8715-fff9c8b85bc1.jpg?v=1710168949"},"aspect_ratio":1.0,"height":2048,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/ITB02_fbdbfd41-5a10-4798-8715-fff9c8b85bc1.jpg?v=1710168949","width":2048},{"alt":"Rzcrew Racing Billet ITB Kit for Honda Civic K20A\/K20Z","id":26122219782326,"position":2,"preview_image":{"aspect_ratio":1.0,"height":2048,"width":2048,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/ITB07_14599236-32ae-4d57-b6ce-4632e9891d30.jpg?v=1710168955"},"aspect_ratio":1.0,"height":2048,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/ITB07_14599236-32ae-4d57-b6ce-4632e9891d30.jpg?v=1710168955","width":2048},{"alt":"Rzcrew Racing Billet ITB Kit for Honda Civic K20A\/K20Z","id":26122219815094,"position":3,"preview_image":{"aspect_ratio":1.0,"height":2048,"width":2048,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/ITB01.jpg?v=1710168960"},"aspect_ratio":1.0,"height":2048,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/ITB01.jpg?v=1710168960","width":2048},{"alt":"Rzcrew Racing Billet ITB Kit for Honda Civic K20A\/K20Z","id":26122219847862,"position":4,"preview_image":{"aspect_ratio":1.439,"height":1112,"width":1600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/RZCREW_Racing_ITB_K-series_3.jpg?v=1710168962"},"aspect_ratio":1.439,"height":1112,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/RZCREW_Racing_ITB_K-series_3.jpg?v=1710168962","width":1600},{"alt":"Rzcrew Racing Billet ITB Kit for Honda Civic K20A\/K20Z","id":26122219880630,"position":5,"preview_image":{"aspect_ratio":1.078,"height":1484,"width":1600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/RZCREW_Racing_ITB_K-series_2_3fbcef51-1a50-462d-84fa-f85015441dd4.jpg?v=1710168965"},"aspect_ratio":1.078,"height":1484,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/RZCREW_Racing_ITB_K-series_2_3fbcef51-1a50-462d-84fa-f85015441dd4.jpg?v=1710168965","width":1600},{"alt":"Rzcrew Racing Billet ITB Kit for Honda Civic K20A\/K20Z","id":26122219913398,"position":6,"preview_image":{"aspect_ratio":1.14,"height":1403,"width":1600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/RZCREW_Racing_ITB_K-series_b69a1d8e-5102-42d2-be0b-ea8e0e5759fc.jpg?v=1710168967"},"aspect_ratio":1.14,"height":1403,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/RZCREW_Racing_ITB_K-series_b69a1d8e-5102-42d2-be0b-ea8e0e5759fc.jpg?v=1710168967","width":1600},{"alt":"Rzcrew Racing Billet ITB Kit for Honda Civic K20A\/K20Z","id":26122219946166,"position":7,"preview_image":{"aspect_ratio":1.144,"height":1398,"width":1600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/RZCREW_Racing_ITB_K-series_5_747a2e0c-5c32-434c-8f19-7f14a7fb9940.jpg?v=1710168970"},"aspect_ratio":1.144,"height":1398,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/RZCREW_Racing_ITB_K-series_5_747a2e0c-5c32-434c-8f19-7f14a7fb9940.jpg?v=1710168970","width":1600},{"alt":"Rzcrew Racing Billet ITB Kit for Honda Civic K20A\/K20Z","id":26122219978934,"position":8,"preview_image":{"aspect_ratio":1.48,"height":1081,"width":1600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/RZCREW_Racing_ITB_K-series_4_05e639b6-eb67-489b-82cd-f7f910313589.jpg?v=1710168973"},"aspect_ratio":1.48,"height":1081,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/RZCREW_Racing_ITB_K-series_4_05e639b6-eb67-489b-82cd-f7f910313589.jpg?v=1710168973","width":1600},{"alt":"Rzcrew Racing Billet ITB Kit for Honda Civic K20A\/K20Z","id":26122220011702,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2020-10-29_at_16.03.16_1_78b6fa9d-d296-4556-a790-84f369492cc1.jpg?v=1710168975"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2020-10-29_at_16.03.16_1_78b6fa9d-d296-4556-a790-84f369492cc1.jpg?v=1710168975","width":1600},{"alt":"Rzcrew Racing Billet ITB Kit for Honda Civic K20A\/K20Z","id":26122220044470,"position":10,"preview_image":{"aspect_ratio":1.333,"height":1200,"width":1600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Individual_Throttle_body_5_9bbf3799-7dc2-4e56-9b70-2a0633a25b28.jpg?v=1710168977"},"aspect_ratio":1.333,"height":1200,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Individual_Throttle_body_5_9bbf3799-7dc2-4e56-9b70-2a0633a25b28.jpg?v=1710168977","width":1600},{"alt":"Rzcrew Racing Billet ITB Kit for Honda Civic K20A\/K20Z","id":26122220077238,"position":11,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Individual_Throttle_body_3_188c3b96-5a55-4fd6-8a73-a503b5b9ec84.jpg?v=1710168980"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Individual_Throttle_body_3_188c3b96-5a55-4fd6-8a73-a503b5b9ec84.jpg?v=1710168980","width":1600},{"alt":"Rzcrew Racing Billet ITB Kit for Honda Civic K20A\/K20Z","id":26122220110006,"position":12,"preview_image":{"aspect_ratio":1.538,"height":1040,"width":1600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Individual_Throttle_body_4_1e5c44c1-76d4-4971-9e9e-4b04aa0b9248.jpg?v=1710168982"},"aspect_ratio":1.538,"height":1040,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Individual_Throttle_body_4_1e5c44c1-76d4-4971-9e9e-4b04aa0b9248.jpg?v=1710168982","width":1600},{"alt":"Rzcrew Racing Billet ITB Kit for Honda Civic K20A\/K20Z","id":26122220142774,"position":13,"preview_image":{"aspect_ratio":1.333,"height":1200,"width":1600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Individual_Throttle_body_5_9c9c7aeb-0d5d-473d-a723-6aca400c38b7.jpg?v=1710168985"},"aspect_ratio":1.333,"height":1200,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Individual_Throttle_body_5_9c9c7aeb-0d5d-473d-a723-6aca400c38b7.jpg?v=1710168985","width":1600},{"alt":"Rzcrew Racing Billet ITB Kit for Honda Civic K20A\/K20Z","id":26122220175542,"position":14,"preview_image":{"aspect_ratio":1.0,"height":640,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew_racing_itb_on_2ZZGE_a9e28886-16b4-48b3-bc96-5da034802aeb.png?v=1710168988"},"aspect_ratio":1.0,"height":640,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew_racing_itb_on_2ZZGE_a9e28886-16b4-48b3-bc96-5da034802aeb.png?v=1710168988","width":640},{"alt":"Rzcrew Racing Billet ITB Kit for Honda Civic K20A\/K20Z","id":26122220208310,"position":15,"preview_image":{"aspect_ratio":1.212,"height":452,"width":548,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Racing_ITB_mounted_on_2ZZ-GE_Engine_7a114f06-ca5b-4a96-83d4-67e4b1859ca6.png?v=1710168990"},"aspect_ratio":1.212,"height":452,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Racing_ITB_mounted_on_2ZZ-GE_Engine_7a114f06-ca5b-4a96-83d4-67e4b1859ca6.png?v=1710168990","width":548},{"alt":"Rzcrew Racing Billet ITB Kit for Honda Civic K20A\/K20Z","id":26122220241078,"position":16,"preview_image":{"aspect_ratio":1.509,"height":1325,"width":2000,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Runners-S2000-01_abe43c48-35fa-431f-8216-271051ddaac4.jpg?v=1710168993"},"aspect_ratio":1.509,"height":1325,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Runners-S2000-01_abe43c48-35fa-431f-8216-271051ddaac4.jpg?v=1710168993","width":2000},{"alt":"Rzcrew Racing Billet ITB Kit for Honda Civic K20A\/K20Z","id":26122220273846,"position":17,"preview_image":{"aspect_ratio":1.0,"height":1212,"width":1212,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/RZ-VM-SC_bac8f47f-118a-442a-a9bb-2c96f9216d6a.jpg?v=1710168995"},"aspect_ratio":1.0,"height":1212,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/RZ-VM-SC_bac8f47f-118a-442a-a9bb-2c96f9216d6a.jpg?v=1710168995","width":1212},{"alt":"Rzcrew Racing Billet ITB Kit for Honda Civic K20A\/K20Z","id":26122220306614,"position":18,"preview_image":{"aspect_ratio":1.193,"height":805,"width":960,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrewgarage_ITB_Gasket_2a686b91-95ba-46c9-bd27-656b54ef77c4.jpg?v=1710168997"},"aspect_ratio":1.193,"height":805,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrewgarage_ITB_Gasket_2a686b91-95ba-46c9-bd27-656b54ef77c4.jpg?v=1710168997","width":960},{"alt":"Rzcrew Racing Billet ITB Kit for Honda Civic K20A\/K20Z","id":26122220339382,"position":19,"preview_image":{"aspect_ratio":1.561,"height":615,"width":960,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrewgarage_Itb_Trumpet_8f2af4f4-9179-49dc-9bcd-c106aac4bf41.jpg?v=1710168999"},"aspect_ratio":1.561,"height":615,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrewgarage_Itb_Trumpet_8f2af4f4-9179-49dc-9bcd-c106aac4bf41.jpg?v=1710168999","width":960},{"alt":"Rzcrew Racing Billet ITB Kit for Honda Civic K20A\/K20Z","id":26122220372150,"position":20,"preview_image":{"aspect_ratio":2.0,"height":540,"width":1080,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.21_0731fe9a-9fca-46ec-9bec-5eff28f82ca2.jpg?v=1710169001"},"aspect_ratio":2.0,"height":540,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.21_0731fe9a-9fca-46ec-9bec-5eff28f82ca2.jpg?v=1710169001","width":1080},{"alt":"Rzcrew Racing Billet ITB Kit for Honda Civic K20A\/K20Z","id":26122220404918,"position":21,"preview_image":{"aspect_ratio":1.335,"height":809,"width":1080,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.20_0718ed5b-e2cd-4b0b-b2ca-94c4252e60a9.jpg?v=1710169003"},"aspect_ratio":1.335,"height":809,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.20_0718ed5b-e2cd-4b0b-b2ca-94c4252e60a9.jpg?v=1710169003","width":1080},{"alt":"Rzcrew Racing Billet ITB Kit for Honda Civic K20A\/K20Z","id":26122220437686,"position":22,"preview_image":{"aspect_ratio":1.333,"height":810,"width":1080,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.20_1_ede60f3e-961b-4158-b5c1-53da91c38462.jpg?v=1710169005"},"aspect_ratio":1.333,"height":810,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.20_1_ede60f3e-961b-4158-b5c1-53da91c38462.jpg?v=1710169005","width":1080},{"alt":"Rzcrew Racing Billet Individual Throttle Bodies kit - Honda - K20A\/K20Z - Cable Throttle Body - [variant sku] - RZCrewGarage","id":26122220470454,"position":23,"preview_image":{"aspect_ratio":1.333,"height":810,"width":1080,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.20_2_5b82755d-2c7c-4078-868e-d0232b5f280e.jpg?v=1710169007"},"aspect_ratio":1.333,"height":810,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2019-01-25_at_17.16.20_2_5b82755d-2c7c-4078-868e-d0232b5f280e.jpg?v=1710169007","width":1080},{"alt":"Rzcrew Racing Billet Individual Throttle Bodies kit - Honda - K20A\/K20Z - Cable Throttle Body - [variant sku] - RZCrewGarage","id":26122220503222,"position":24,"preview_image":{"aspect_ratio":1.333,"height":810,"width":1080,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2018-12-13_at_15.16.37_f50f1e7a-4506-4c41-983c-aaeb34b69ece.jpg?v=1710169009"},"aspect_ratio":1.333,"height":810,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2018-12-13_at_15.16.37_f50f1e7a-4506-4c41-983c-aaeb34b69ece.jpg?v=1710169009","width":1080},{"alt":"Rzcrew Racing Billet Individual Throttle Bodies kit - Honda - K20A\/K20Z - Cable Throttle Body - [variant sku] - RZCrewGarage","id":26122220535990,"position":25,"preview_image":{"aspect_ratio":1.333,"height":1200,"width":1600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2023-04-13_at_17.20.56_7433d659-517f-4867-abf2-60e8cbf0a388.jpg?v=1710169011"},"aspect_ratio":1.333,"height":1200,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2023-04-13_at_17.20.56_7433d659-517f-4867-abf2-60e8cbf0a388.jpg?v=1710169011","width":1600},{"alt":"Rzcrew Racing Billet Individual Throttle Bodies kit - Honda - K20A\/K20Z - Cable Throttle Body - [variant sku] - RZCrewGarage","id":26122220568758,"position":26,"preview_image":{"aspect_ratio":1.333,"height":1200,"width":1600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2023-04-13_at_17.20.55_b413c92d-cb9c-4d05-81e2-b731e16f12db.jpg?v=1710169014"},"aspect_ratio":1.333,"height":1200,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2023-04-13_at_17.20.55_b413c92d-cb9c-4d05-81e2-b731e16f12db.jpg?v=1710169014","width":1600},{"alt":"Rzcrew Racing Billet Individual Throttle Bodies kit - Honda - K20A\/K20Z - Cable Throttle Body - [variant sku] - RZCrewGarage","id":26122220601526,"position":27,"preview_image":{"aspect_ratio":1.333,"height":1200,"width":1600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2023-04-13_at_17.20.55_d4ef5342-5f27-4b7b-9ab5-26ec50f3f261.jpg?v=1710169016"},"aspect_ratio":1.333,"height":1200,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/WhatsApp_Image_2023-04-13_at_17.20.55_d4ef5342-5f27-4b7b-9ab5-26ec50f3f261.jpg?v=1710169016","width":1600},{"alt":"Rzcrew Racing Billet Individual Throttle Bodies kit - Honda - K20A\/K20Z - Cable Throttle Body - [variant sku] - RZCrewGarage","id":26122220634294,"position":28,"preview_image":{"aspect_ratio":1.092,"height":927,"width":1012,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Anodisation-Colours_0159841c-ffee-44d5-b797-b4bebe0fc8cb.jpg?v=1710169018"},"aspect_ratio":1.092,"height":927,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Anodisation-Colours_0159841c-ffee-44d5-b797-b4bebe0fc8cb.jpg?v=1710169018","width":1012}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003eReference Number: BITB-H-KC-34mm-SS\u003cbr\u003eIntake Type: ITB Kit\u003cbr\u003ePlease choose Throttle diameter during check out:\u003cbr\u003e45mm\u003cbr\u003e48mm\u003cbr\u003e50mm\u003cbr\u003e52mm\u003cbr\u003e55mm\u003c\/p\u003e\n\u003cp\u003eITB Kit will come without water passage by default, let us know in the checkout notes if you want them with the water passage on the flange\u003cbr\u003e\u003cbr\u003eWe have now added the option to choose no trumpet and purchase Our Titanium Velocity stack for your kit. Please refer to this link: \u003ca href=\"url\"\u003ehttps:\/\/rzcrewgarage.com\/products\/rzcrew-racing-titanium-velocity-stack-set-trumpet-for-rzcrew-racing-indiviual-throttle-body-itb\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003eCustom diameter available on request. Cost may vary. Please contact us.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecial Note about ITB on this particular car model:\u003c\/strong\u003e\u003cbr\u003eMaximum Recommended Trumpet Length: 75mmThis is the third version of our Individual Throttle Body design, introducing a fully customisable linkage system for perfect idle tuning.\u003cbr\u003e\u003cbr\u003eThe New ITB V3 feature:\u003cbr\u003e\u003cbr\u003e*New multidirectional linkage assembly uses Japanese-made bearings for a smooth throttle response. The new linkage system allows for individual adjustment of each throttle plate individually for the precise idle fine tuning.\u003cbr\u003e*The introduction of a new CNC Machined Titanium shaft avoids any distortion due to wear and tear, and keeps the assembly light for a great pedal feel.\u003cbr\u003e*Each throttle body flap is now individually customised to each throttle body for perfect fitment, preventing any leak.\u003cbr\u003e*This new system also allows us to machine 55mm throttle body opening for the most hardcore setups.\u003cbr\u003e*Billet Individual throttle body adapter, also called Runner, these are calculated to make the installation easy and keeping the ITB Mechanism closed to the head to ensure perfect flow and less turbulence. The shorter flow's travel also enhances engine response and Torque.\u003cbr\u003e* Billet ITB system. Our ITB are machined in one piece of billet aluminum on high precision CNC Machine to ensure perfect fitting and flow. Fully mounted on ball bearing to get a smooth pedal feel and perfect air delivery in each cylinder. Each Throttle plate are manufactured in copper to avoid any sticky feeling under high heat. Throttle Diameter may Vary depending on engine model, we usually propose 3 different diameters yet you can contact us for any design. The Throttle body diameter are listed on the specs so let us know during time of ordering.\u003cbr\u003eAnodisation are also available on request for the ITB Body. If you want to make your engine bay shines, we propose 8 different colours to match your style! Please check the picture and let us know during checkout. ( default colour is silver)\u003cbr\u003eEach Throttle plates are commanded by a single mechanism making the hidling tuning of each cylinder a breeze and avoiding chaotic hidling. * Teflon gaskets are included between the runner and the itb as well as the trumpet to ensure low heat conductivity.\u003cbr\u003e* Custom lenght Trumpet. It is important to choose the right trumpet lenght depending on your application. For higher peak power we recommend shorter Trumpet lenght. For Torque, we recommend longer lenght. You can choose the appropriate lenght in our option menu on the right. Certain engine responses are different so feel free to enquire, we will ba glad to help you.\u003cbr\u003e\u003cbr\u003e* Vaccum Box is included, get all your vaccum set at once and link it to your brake booster and other encilliaries. It also includes all billet fitting with different diameter to get it linked to your vaccum circuit promptly. Please note that vaccum hoses are not included in this kit.\u003cbr\u003e\u003cbr\u003eRzcrew Garage ITB are modular. They follow the same bolt pattern as our Airstream Billet Manifold, with that in mind you can easily upgrade your Airstream billet Manifold to ITB or purchase the intake manifold box separetly if you wish to run an air filter on your ITB setup.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSee them in Action:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIn December 2019, we flew to France to meet our good friends at CRTUNE, the mission was simple: Dyno and test our prototype. Their K20A Eg6 is already quite a beast but well power is never enough. Their setup is the following:\u003cbr\u003e*DC5 K20A\u003cbr\u003eStock Compression Ratio\u003cbr\u003eDrag cartel 2.2 Camshafts\u003cbr\u003eDry Sump setup\u003cbr\u003eExhaust header and catback 2.5\"\u003cbr\u003eAdding our Itb to the mix made 278HP and 267Nm Torque. Video and pictures Below!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/uMa-hxTbHPE\" width=\"750\" height=\"422\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003cbr\u003eImportant Note:\u003cbr\u003eOur system follows the stock Throttle position sensor for ease of installation, please note that you will need a standalone ECU for starting you car and tuning it properly.We highly recommend a professional tuner to do the job and install them.\u003cbr\u003eFitting ITBs required higher compressions as well as up-rated camshafts to ensure a proper Horse power and Torque Gain, Fitting it on a stock engine is do-able yet not the best to maximise your setup.\u003cbr\u003eAll our Individual Throttle bodies are actionned by cable and you may be required to convert your pedal and mechanism if using EThrottle. Modification on your accelerator cable may be needed in certain case.\u003cbr\u003e\u003cbr\u003eIt may not be available for your car but feel free to ask, we will be glad to customize something for you.\u003cbr\u003e\u003cbr\u003ePlease note that this product is made on order and take a minimum of 1 month production time!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003c\/p\u003e\n\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAccord Euro R | CL7 | 2002-2008 | NA | K20A | I4\u003cbr\u003eAccord | CL8 | 2002-2005 | NA | K20A | I4\u003cbr\u003eAccord Wagon | CM1 | 2004-2005 | NA | K20A | I4\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003cbr\u003eCR-V | RD4 | 2002-2006 | NA | K20A | I4\u003cbr\u003eCR-V | RD5 | 2002-2006 | NA | K20A | I4\u003cbr\u003eEdix | BE3 | 2004-2006 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Zenki | 2002-2004 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Kouki | 2004-2006 | NA | K20A | I4\u003cbr\u003eIntegra | DC5 | 2002-2006 | NA | K20Z1 | I4\u003c!--split--\u003e"}

{"id":4348938125409,"title":"Rzcrew Racing - Airstream Intake Manifold - Honda - Civic Type R EP3","handle":"rzcrew-racing-airstream-intake-manifold-honda-civic-type-r-ep3-air-h-k20ep","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003eReference Number: AIR-H-K20EP\u003cbr\u003eIntake Type: Intake Manifold\u003cbr\u003e\u003cbr\u003eThis is the NEW Airstream Intake Manifold for the Honda K20 featuring the RBC manifold bolt pattern. This newly designed intake manifold for the K series engine is especially engineered for NA and Turbo Application. It features:\u003cbr\u003e- A new flange system for easy bolt-on installation.\u003cbr\u003e- A newly designed plenum with optimised airflow for better performance.\u003cbr\u003e- Slightly Shorter runners and reworked trumpets for better induction performance along the whole power range.\u003cbr\u003e\u003cbr\u003eAll Rzcrew Racing Airstream Intake Manifolds feature high capacity plenums for better engine response and calculated oversized runners to ensure a faster airflow into the engine head. The flange is made to match the stock head for a seamless and turbulence-free air flow in the combustion chamber.\u003cbr\u003e\nOur proprietary AirStream technology features internal trumpets angled to optimise air flow and ensure each cylinder is fed with the same amount of air. The results are improved power along the entire rev range.\u003cbr\u003e\n\u003cbr\u003e\nRZCrew's Aluminum intake manifolds are direct-fit replacements for the original intakes and designed to work with stock or oversized throttle bodies. Please check the specifications for the supported throttle body diameter, plenum size, etc.\u003cbr\u003e\nOur manifolds are designed to be heavy duty to handle racing application without showing weaknesses or cracks.\u003cbr\u003e\n\u003cbr\u003e\nWe highly recommend to have your intake manifolds professionally installed and Tune with a standalone to get the best performance out of our intakes.\u003cbr\u003e\u003cbr\u003eWhat's in the Box:\u003cbr\u003e- Aistream Technology Intake Manifold\u003cbr\u003e- 4x 6mm diameter aluminum Fittings\u003cbr\u003e- 1x 8mm diameter aluminum Fitting (Brake Booster)\u003cbr\u003e- 4x 6mm diameter plugs\u003cbr\u003e- 1x 8mm diameter aluminum plug\u003cbr\u003e\u003cbr\u003eOptional:\u003cbr\u003e- Rzcrew Racing 70mm Big Throttle body\u003cbr\u003eRzcrew Racing Heat resistant Throttle Teflon Gasket\u003cbr\u003e\u003cbr\u003eFor Na or Forced Induction applications, the RZCrew manifolds generate between 5 to 30hp with supporting modifications (high cams, higher flow injectors, etc) and engine tuning.\u003cbr\u003e\nOur intake Manifold features a stock Throttle body pattern ( 74mmmm inlet diameter) To accomodate any Aftermarket Throttle body ( RZCREW Racing, Spoon, Ktuned). Maf sensor wiring may need to be extended or rerouted during instalation. We offer in Option the Rzcrew Racing Throttle body featuring a big 70mm Inner diameter allowing more air into your engine. This Throtle body is Bolt-on on this intake and comes with its Teflon Gasket for easy installation.\u003cbr\u003e\u003cbr\u003eSpecification:\u003cbr\u003eThrottle body opening (mm): 74mm\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003c!--split--\u003e","published_at":"2019-11-07T17:13:30+08:00","created_at":"2019-11-07T17:13:34+08:00","vendor":"Rzcrew Racing","type":"Intake Manifolds","tags":["2001","2002","2003","2004","2005","civic-type-r-ep3-2001-2005-na-k20a-i4","honda","intake","intake-manifold","intake-manifolds","manifolds","rzcrew-garage","rzcrew-racing","sg1","ws130"],"price":41300,"price_min":41300,"price_max":60900,"available":true,"price_varies":true,"compare_at_price":59000,"compare_at_price_min":59000,"compare_at_price_max":87000,"compare_at_price_varies":true,"variants":[{"id":37408818200758,"title":"No, Stock Throttle Body Pattern with 74mm opening \/ Silver","option1":"No, Stock Throttle Body Pattern with 74mm opening","option2":"Silver","option3":null,"sku":"AIR-H-K20EP","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Airstream Intake Manifold - Honda - Civic Type R EP3 - No, Stock Throttle Body Pattern with 74mm opening \/ Silver","public_title":"No, Stock Throttle Body Pattern with 74mm opening \/ Silver","options":["No, Stock Throttle Body Pattern with 74mm opening","Silver"],"price":41300,"weight":6200,"compare_at_price":59000,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":37408818233526,"title":"No, Stock Throttle Body Pattern with 74mm opening \/ Other Colour","option1":"No, Stock Throttle Body Pattern with 74mm opening","option2":"Other Colour","option3":null,"sku":"AIR-H-K20EP-C","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Airstream Intake Manifold - Honda - Civic Type R EP3 - No, Stock Throttle Body Pattern with 74mm opening \/ Other Colour","public_title":"No, Stock Throttle Body Pattern with 74mm opening \/ Other Colour","options":["No, Stock Throttle Body Pattern with 74mm opening","Other Colour"],"price":47600,"weight":6200,"compare_at_price":68000,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":37408818266294,"title":"Yes, Includes Rzcrew Racing 70mm Billet Throttle Body \/ Silver","option1":"Yes, Includes Rzcrew Racing 70mm Billet Throttle Body","option2":"Silver","option3":null,"sku":"AIR-H-K20-70TB","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Rzcrew Racing - Airstream Intake Manifold - Honda - Civic Type R EP3 - Yes, Includes Rzcrew Racing 70mm Billet Throttle Body \/ Silver","public_title":"Yes, Includes Rzcrew Racing 70mm Billet Throttle Body \/ Silver","options":["Yes, Includes Rzcrew Racing 70mm Billet Throttle Body","Silver"],"price":54600,"weight":7200,"compare_at_price":78000,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":37408818299062,"title":"Yes, Includes Rzcrew Racing 70mm Billet Throttle Body \/ Other Colour","option1":"Yes, Includes Rzcrew Racing 70mm Billet Throttle Body","option2":"Other Colour","option3":null,"sku":"AIR-H-K20-70TB-C","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Rzcrew Racing - Airstream Intake Manifold - Honda - Civic Type R EP3 - Yes, Includes Rzcrew Racing 70mm Billet Throttle Body \/ Other Colour","public_title":"Yes, Includes Rzcrew Racing 70mm Billet Throttle Body \/ Other Colour","options":["Yes, Includes Rzcrew Racing 70mm Billet Throttle Body","Other Colour"],"price":60900,"weight":7200,"compare_at_price":87000,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/AI-HK20-EP.jpg?v=1710190057","\/\/rzcrewgarage.com\/cdn\/shop\/products\/AIR-H-K20EP3_55f4c2ed-0de2-4c6a-932d-db494f3702e3.jpg?v=1710190059","\/\/rzcrewgarage.com\/cdn\/shop\/products\/AIR-H-K20EP_64909a6e-4e2b-4b77-adfb-a8d28d4f1204.jpg?v=1710190061","\/\/rzcrewgarage.com\/cdn\/shop\/products\/AIR-H-K20EP4_6fcbe59e-9ea4-42b0-80e1-1abbb0290697.jpg?v=1710190065","\/\/rzcrewgarage.com\/cdn\/shop\/products\/AIR-H-K20TB4_ed14c5f2-3eb3-4ed2-8f0c-efb43940de86.jpg?v=1710190067","\/\/rzcrewgarage.com\/cdn\/shop\/files\/RzcrewRacingAirstreamIntaklemanifoldDynoHondaK20_363c1ff6-1945-417b-b47b-12fb6cdd561e.jpg?v=1710190071","\/\/rzcrewgarage.com\/cdn\/shop\/products\/Anodisation-Colours_39ec721c-555b-49df-b376-792cb0580efa.jpg?v=1710190073"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/AI-HK20-EP.jpg?v=1710190057","options":["Throttle body","Anodisation:"],"media":[{"alt":"Rzcrew Racing - Airstream Intake Manifold - Honda - Civic Type R EP3","id":25445202002102,"position":1,"preview_image":{"aspect_ratio":1.517,"height":712,"width":1080,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/AI-HK20-EP.jpg?v=1710190057"},"aspect_ratio":1.517,"height":712,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/AI-HK20-EP.jpg?v=1710190057","width":1080},{"alt":"Rzcrew Racing - Airstream Intake Manifold - Honda - Civic Type R EP3","id":25445202034870,"position":2,"preview_image":{"aspect_ratio":1.622,"height":666,"width":1080,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/AIR-H-K20EP3_55f4c2ed-0de2-4c6a-932d-db494f3702e3.jpg?v=1710190059"},"aspect_ratio":1.622,"height":666,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/AIR-H-K20EP3_55f4c2ed-0de2-4c6a-932d-db494f3702e3.jpg?v=1710190059","width":1080},{"alt":"Rzcrew Racing - Airstream Intake Manifold - Honda - Civic Type R EP3","id":25445202067638,"position":3,"preview_image":{"aspect_ratio":1.204,"height":897,"width":1080,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/AIR-H-K20EP_64909a6e-4e2b-4b77-adfb-a8d28d4f1204.jpg?v=1710190061"},"aspect_ratio":1.204,"height":897,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/AIR-H-K20EP_64909a6e-4e2b-4b77-adfb-a8d28d4f1204.jpg?v=1710190061","width":1080},{"alt":"Rzcrew Racing - Airstream Intake Manifold - Honda - Civic Type R EP3","id":25445202100406,"position":4,"preview_image":{"aspect_ratio":1.0,"height":897,"width":897,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/AIR-H-K20EP4_6fcbe59e-9ea4-42b0-80e1-1abbb0290697.jpg?v=1710190065"},"aspect_ratio":1.0,"height":897,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/AIR-H-K20EP4_6fcbe59e-9ea4-42b0-80e1-1abbb0290697.jpg?v=1710190065","width":897},{"alt":"Rzcrew Racing - Airstream Intake Manifold - Honda - Civic Type R EP3","id":25445202133174,"position":5,"preview_image":{"aspect_ratio":1.187,"height":852,"width":1011,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/AIR-H-K20TB4_ed14c5f2-3eb3-4ed2-8f0c-efb43940de86.jpg?v=1710190067"},"aspect_ratio":1.187,"height":852,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/AIR-H-K20TB4_ed14c5f2-3eb3-4ed2-8f0c-efb43940de86.jpg?v=1710190067","width":1011},{"alt":"Rzcrew Racing - Airstream Intake Manifold - Honda - Civic Type R EP3 - [variant sku] - RZCrewGarage","id":26284969885878,"position":6,"preview_image":{"aspect_ratio":1.414,"height":1131,"width":1599,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/RzcrewRacingAirstreamIntaklemanifoldDynoHondaK20_363c1ff6-1945-417b-b47b-12fb6cdd561e.jpg?v=1710190071"},"aspect_ratio":1.414,"height":1131,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/RzcrewRacingAirstreamIntaklemanifoldDynoHondaK20_363c1ff6-1945-417b-b47b-12fb6cdd561e.jpg?v=1710190071","width":1599},{"alt":"Rzcrew Racing - Airstream Intake Manifold - Honda - Civic Type R EP3","id":25445202165942,"position":7,"preview_image":{"aspect_ratio":1.092,"height":927,"width":1012,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Anodisation-Colours_39ec721c-555b-49df-b376-792cb0580efa.jpg?v=1710190073"},"aspect_ratio":1.092,"height":927,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Anodisation-Colours_39ec721c-555b-49df-b376-792cb0580efa.jpg?v=1710190073","width":1012}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003eReference Number: AIR-H-K20EP\u003cbr\u003eIntake Type: Intake Manifold\u003cbr\u003e\u003cbr\u003eThis is the NEW Airstream Intake Manifold for the Honda K20 featuring the RBC manifold bolt pattern. This newly designed intake manifold for the K series engine is especially engineered for NA and Turbo Application. It features:\u003cbr\u003e- A new flange system for easy bolt-on installation.\u003cbr\u003e- A newly designed plenum with optimised airflow for better performance.\u003cbr\u003e- Slightly Shorter runners and reworked trumpets for better induction performance along the whole power range.\u003cbr\u003e\u003cbr\u003eAll Rzcrew Racing Airstream Intake Manifolds feature high capacity plenums for better engine response and calculated oversized runners to ensure a faster airflow into the engine head. The flange is made to match the stock head for a seamless and turbulence-free air flow in the combustion chamber.\u003cbr\u003e\nOur proprietary AirStream technology features internal trumpets angled to optimise air flow and ensure each cylinder is fed with the same amount of air. The results are improved power along the entire rev range.\u003cbr\u003e\n\u003cbr\u003e\nRZCrew's Aluminum intake manifolds are direct-fit replacements for the original intakes and designed to work with stock or oversized throttle bodies. Please check the specifications for the supported throttle body diameter, plenum size, etc.\u003cbr\u003e\nOur manifolds are designed to be heavy duty to handle racing application without showing weaknesses or cracks.\u003cbr\u003e\n\u003cbr\u003e\nWe highly recommend to have your intake manifolds professionally installed and Tune with a standalone to get the best performance out of our intakes.\u003cbr\u003e\u003cbr\u003eWhat's in the Box:\u003cbr\u003e- Aistream Technology Intake Manifold\u003cbr\u003e- 4x 6mm diameter aluminum Fittings\u003cbr\u003e- 1x 8mm diameter aluminum Fitting (Brake Booster)\u003cbr\u003e- 4x 6mm diameter plugs\u003cbr\u003e- 1x 8mm diameter aluminum plug\u003cbr\u003e\u003cbr\u003eOptional:\u003cbr\u003e- Rzcrew Racing 70mm Big Throttle body\u003cbr\u003eRzcrew Racing Heat resistant Throttle Teflon Gasket\u003cbr\u003e\u003cbr\u003eFor Na or Forced Induction applications, the RZCrew manifolds generate between 5 to 30hp with supporting modifications (high cams, higher flow injectors, etc) and engine tuning.\u003cbr\u003e\nOur intake Manifold features a stock Throttle body pattern ( 74mmmm inlet diameter) To accomodate any Aftermarket Throttle body ( RZCREW Racing, Spoon, Ktuned). Maf sensor wiring may need to be extended or rerouted during instalation. We offer in Option the Rzcrew Racing Throttle body featuring a big 70mm Inner diameter allowing more air into your engine. This Throtle body is Bolt-on on this intake and comes with its Teflon Gasket for easy installation.\u003cbr\u003e\u003cbr\u003eSpecification:\u003cbr\u003eThrottle body opening (mm): 74mm\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003c!--split--\u003e"}

{"id":4348989800545,"title":"Rzcrew Racing - Billet 70mm Throttle body - Honda - Civic Type R EP3","handle":"rzcrew-racing-billet-70mm-throttle-body-honda-civic-type-r-ep3-air-h-tb70et","description":"\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003eReference Number: AIR-H-TB70ET\u003cbr\u003eIntake Type: Intake\u003cbr\u003e\u003cbr\u003eThis is the new Rzcrew Racing Throttle body. A full Billet construction with a 70mm Inlet ensuring the right amount of air for your Honda K20. The Throttle body plate is edged to ensure maximum airflow and no sticky feeling under high intensity use.\u003cbr\u003e\u003cbr\u003eWhat's in the Box:\u003cbr\u003e- Rzcrew Racing Billet Throttle Body\u003cbr\u003e\u003cbr\u003eFor Na or Forced Induction applications, the RZCrew Racig Throttle body is a great addition to our Airstream intake manifold. It generates between 4 to 7hp with supporting modifications (high cams, higher flow injectors, etc) and engine tuning.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSpecification:\u003cbr\u003eThrottle body opening (mm): 70mm\u003c\/p\u003e\n\u003c!--split--\u003e\n\u003cp\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c\/p\u003e\n\u003c!--split--\u003e\n\u003cp\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003c\/p\u003e\n\u003c!--split--\u003e","published_at":"2024-11-12T17:46:14+08:00","created_at":"2019-11-07T17:36:39+08:00","vendor":"Rzcrew Racing","type":"Throttle Bodies","tags":["2001","2002","2003","2004","2005","civic-type-r-ep3-2001-2005-na-k20a-i4","honda","intake","rzcrew-garage","rzcrew-racing","sg1","ws130"],"price":13300,"price_min":13300,"price_max":13300,"available":true,"price_varies":false,"compare_at_price":19000,"compare_at_price_min":19000,"compare_at_price_max":19000,"compare_at_price_varies":false,"variants":[{"id":31156151484513,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"AIR-H-TB70ET","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Billet 70mm Throttle body - Honda - Civic Type R EP3","public_title":null,"options":["Default Title"],"price":13300,"weight":1000,"compare_at_price":19000,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/AIR-H-K20TB5_150afba1-9f31-4c87-b714-c979d9a7415e.jpg?v=1710190078","\/\/rzcrewgarage.com\/cdn\/shop\/products\/AIR-H-K20TB4_22449232-5b06-4d21-8d4d-26c8b5f6f161.jpg?v=1710190080","\/\/rzcrewgarage.com\/cdn\/shop\/products\/AIR-H-K20TB_2debfa18-7930-49de-89e2-974d291f3976.jpg?v=1710190083","\/\/rzcrewgarage.com\/cdn\/shop\/products\/AIR-H-K20TB2_8ba89d38-71af-4bfc-9f9a-9fb8ac90c788.jpg?v=1710190085","\/\/rzcrewgarage.com\/cdn\/shop\/products\/AIR-H-K20TB3_29599870-bbba-4ad0-b9f1-4587b6caffba.jpg?v=1710190087"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/AIR-H-K20TB5_150afba1-9f31-4c87-b714-c979d9a7415e.jpg?v=1710190078","options":["Title"],"media":[{"alt":"Rzcrew Racing - Billet 70mm Throttle body - Honda - Civic Type R EP3","id":25445243781302,"position":1,"preview_image":{"aspect_ratio":1.097,"height":774,"width":849,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/AIR-H-K20TB5_150afba1-9f31-4c87-b714-c979d9a7415e.jpg?v=1710190078"},"aspect_ratio":1.097,"height":774,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/AIR-H-K20TB5_150afba1-9f31-4c87-b714-c979d9a7415e.jpg?v=1710190078","width":849},{"alt":"Rzcrew Racing - Billet 70mm Throttle body - Honda - Civic Type R EP3","id":25445243814070,"position":2,"preview_image":{"aspect_ratio":1.187,"height":852,"width":1011,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/AIR-H-K20TB4_22449232-5b06-4d21-8d4d-26c8b5f6f161.jpg?v=1710190080"},"aspect_ratio":1.187,"height":852,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/AIR-H-K20TB4_22449232-5b06-4d21-8d4d-26c8b5f6f161.jpg?v=1710190080","width":1011},{"alt":"Rzcrew Racing - Billet 70mm Throttle body - Honda - Civic Type R EP3","id":25445243846838,"position":3,"preview_image":{"aspect_ratio":1.139,"height":948,"width":1080,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/AIR-H-K20TB_2debfa18-7930-49de-89e2-974d291f3976.jpg?v=1710190083"},"aspect_ratio":1.139,"height":948,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/AIR-H-K20TB_2debfa18-7930-49de-89e2-974d291f3976.jpg?v=1710190083","width":1080},{"alt":"Rzcrew Racing - Billet 70mm Throttle body - Honda - Civic Type R EP3","id":25445243879606,"position":4,"preview_image":{"aspect_ratio":1.368,"height":684,"width":936,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/AIR-H-K20TB2_8ba89d38-71af-4bfc-9f9a-9fb8ac90c788.jpg?v=1710190085"},"aspect_ratio":1.368,"height":684,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/AIR-H-K20TB2_8ba89d38-71af-4bfc-9f9a-9fb8ac90c788.jpg?v=1710190085","width":936},{"alt":"Rzcrew Racing - Billet 70mm Throttle body - Honda - Civic Type R EP3","id":25445243912374,"position":5,"preview_image":{"aspect_ratio":1.5,"height":720,"width":1080,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/AIR-H-K20TB3_29599870-bbba-4ad0-b9f1-4587b6caffba.jpg?v=1710190087"},"aspect_ratio":1.5,"height":720,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/AIR-H-K20TB3_29599870-bbba-4ad0-b9f1-4587b6caffba.jpg?v=1710190087","width":1080}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003eReference Number: AIR-H-TB70ET\u003cbr\u003eIntake Type: Intake\u003cbr\u003e\u003cbr\u003eThis is the new Rzcrew Racing Throttle body. A full Billet construction with a 70mm Inlet ensuring the right amount of air for your Honda K20. The Throttle body plate is edged to ensure maximum airflow and no sticky feeling under high intensity use.\u003cbr\u003e\u003cbr\u003eWhat's in the Box:\u003cbr\u003e- Rzcrew Racing Billet Throttle Body\u003cbr\u003e\u003cbr\u003eFor Na or Forced Induction applications, the RZCrew Racig Throttle body is a great addition to our Airstream intake manifold. It generates between 4 to 7hp with supporting modifications (high cams, higher flow injectors, etc) and engine tuning.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSpecification:\u003cbr\u003eThrottle body opening (mm): 70mm\u003c\/p\u003e\n\u003c!--split--\u003e\n\u003cp\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c\/p\u003e\n\u003c!--split--\u003e\n\u003cp\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003c\/p\u003e\n\u003c!--split--\u003e"}

{"id":6257061527734,"title":"Rzcrew Racing - Billet Airstream Centerfeed Intake Manifold - Honda - Civic K20A\/K20Z\/K series","handle":"rzcrew-racing-billet-airstream-centerfeed-intake-manifold-honda-civic-k20a-k20z-k-series-hvair-h-kscf","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003eReference Number: HVAIR-H-KSCF\u003cbr\u003eIntake Type: Intake Manifold\u003cbr\u003e\u003cbr\u003eThis is the Version 2 of our popular Rzcrew Racing Billet Airstream Intake Manifold for the Honda K-series. This newly re-designed Rzcrew intake manifold for the K20A and K20Z features:\u003cbr\u003e- Full Two Parts Billet construction with Symetrical plenum. The throttle body could be installed either side.\u003cbr\u003e- Heat resistant Teflon Gasket between the plenum and the runners to ensure lower intake temperature.\u003cbr\u003e-Lighweight Construction: Only 6Kg.\u003cbr\u003e- A new flange system for easy bolt-on installation.\u003cbr\u003e- Total Intake Volume is 3.2L featuring 2.2L plenum with optimised airflow for better performance. Please note that Plenum Volume could be increase in demand( payable option).\u003cbr\u003e- Center Feed Throttle body position.\u003cbr\u003e- Runners lenght are similar to the stock Manifold and Trumpets are reworked for better NA and Boosted performance along the whole power range. You also do not need to pay for extra Intake Porting.\u003cbr\u003e\u003cbr\u003eAll Rzcrew Racing Airstream Intake Manifolds feature high capacity plenums for better engine response and calculated oversized runners to ensure a faster airflow into the engine head. The flange is made to match the stock head for a seamless and turbulence-free air flow in the combustion chamber.\u003cbr\u003e\nOur proprietary AirStream technology features internal trumpets angled to optimise air flow and ensure each cylinder is fed with the same amount of air. The results are improved power along the entire rev range. You can check our flow testing in the product picture.\u003cbr\u003e\n\u003cbr\u003e\nRZCrew's Billet intake manifolds are direct-fit replacements for the original intakes and designed to work with stock or oversized throttle bodies. Please check the specifications for the supported throttle body diameter, plenum size, etc.\u003cbr\u003e\nOur manifolds are designed to be heavy duty to handle racing application without showing weaknesses or cracks.\u003cbr\u003e\n\u003cbr\u003e\nWe highly recommend to have your intake manifolds professionally installed and Tune with a standalone to get the best performance out of our intakes.\u003cbr\u003e\u003cbr\u003eWhat's in the Box:\u003cbr\u003e- Two Parts Full Billet Rzcrew Racing Airstream Technology center feed Intake Manifold.\u003cbr\u003e- Heat Resistant Teflon Plenum to Intake Gasket.\u003cbr\u003e- Heat Resistant Teflon Throttle Body Gasket.\u003cbr\u003e- Eacv Complete Billet Relocation Kit with Fitting.\u003cbr\u003e- Coolant Passage Optional relocation Kit\u003cbr\u003e- AN16 and 32mm Fittings for coolant passage. Can Be installed with Aftermarket AN1 Hoses or plug the stock OEM unit.\u003cbr\u003e- All Aluminum Fittings and Blockers.\u003cbr\u003e\u003cbr\u003eFor Na or Forced Induction applications, the RZCrew Racing Billet manifold generate between 5 to 30hp with supporting modifications (high cams, higher flow injectors, etc) and engine tuning.\u003cbr\u003eOur intake Manifold features a stock Throttle body pattern ( 70mm inlet diameter) To accomodate any Aftermarket Throttle body ( Rzcrew Racing, Skunk 2, Ktuned). Sensor wiring may need to be extended or rerouted during instalation. Vaccum lines need to be rerouted.\u003cbr\u003e\u003cbr\u003eSpecification:\u003cbr\u003eThrottle body opening (mm): 70mm ( 72, 74 or 76 mm ID are also available). For other ID contact us. It may be chargeable. During checkout let us know the throttle body pattern used ( RRC, RBC, RRB)\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Product in Development. Lead time may vary extensively. Contact us for an accurate shipping date. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R Euro | FN2R | 2009-2012 | NA | K20A | I4\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003cbr\u003eCivic Type R | FD2R | 2007-2010 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Zenki | 2002-2004 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Kouki | 2004-2006 | NA | K20A | I4\u003cbr\u003eIntegra | DC5 | 2002-2006 | NA | K20Z1 | I4\u003cbr\u003eAccord Euro R | CL7 | 2002-2008 | NA | K20A | I4\u003cbr\u003eAccord | CL9 | 2002-2008 | NA | K24A3 | I4\u003c!--split--\u003e","published_at":"2021-02-10T15:29:29+08:00","created_at":"2021-02-10T15:29:32+08:00","vendor":"Rzcrew Racing","type":"Intake Manifolds","tags":["2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","accord-cl9-2002-2008-na-k24a3-i4","accord-euro-r-cl7-2002-2008-na-k20a-i4","civic-type-r-ep3-2001-2005-na-k20a-i4","civic-type-r-euro-fn2r-2009-2012-na-k20a-i4","civic-type-r-fd2r-2007-2010-na-k20a-i4","honda","intake","intake-manifold","intake-manifolds","integra-dc5-2002-2006-na-k20z1-i4","integra-type-r-dc5r-kouki-2004-2006-na-k20a-i4","integra-type-r-dc5r-zenki-2002-2004-na-k20a-i4","manifolds","rzcrew-garage","rzcrew-racing","sg1","ws130"],"price":83300,"price_min":83300,"price_max":95900,"available":true,"price_varies":true,"compare_at_price":119000,"compare_at_price_min":119000,"compare_at_price_max":137000,"compare_at_price_varies":true,"variants":[{"id":38022190399670,"title":"Silver","option1":"Silver","option2":null,"option3":null,"sku":"HVAIR-H-KSCF","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Billet Airstream Centerfeed Intake Manifold - Honda - Civic K20A\/K20Z\/K series - Silver","public_title":"Silver","options":["Silver"],"price":83300,"weight":10000,"compare_at_price":119000,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":38022190432438,"title":"1 Colour ( Full intake Anodisation)","option1":"1 Colour ( Full intake Anodisation)","option2":null,"option3":null,"sku":"HVAIR-H-KSCF-C","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Billet Airstream Centerfeed Intake Manifold - Honda - Civic K20A\/K20Z\/K series - 1 Colour ( Full intake Anodisation)","public_title":"1 Colour ( Full intake Anodisation)","options":["1 Colour ( Full intake Anodisation)"],"price":89600,"weight":10000,"compare_at_price":128000,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":38022190465206,"title":"2 Colours ( Runner and plenum colours are different)","option1":"2 Colours ( Runner and plenum colours are different)","option2":null,"option3":null,"sku":"HVAIR-H-KSCF-C-C","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Billet Airstream Centerfeed Intake Manifold - Honda - Civic K20A\/K20Z\/K series - 2 Colours ( Runner and plenum colours are different)","public_title":"2 Colours ( Runner and plenum colours are different)","options":["2 Colours ( Runner and plenum colours are different)"],"price":95900,"weight":10000,"compare_at_price":137000,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-billet-airstream-centerfeed-intake-manifold-honda-civic-k20ak20zk-series-rzcrew-1.jpg?v=1710329623","\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-billet-airstream-centerfeed-intake-manifold-honda-civic-k20ak20zk-series-rzcrew-2.jpg?v=1710329624","\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-billet-airstream-centerfeed-intake-manifold-honda-civic-k20ak20zk-series-rzcrew-3.jpg?v=1710329625","\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-billet-airstream-centerfeed-intake-manifold-honda-civic-k20ak20zk-series-rzcrew-4.jpg?v=1710329626"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-billet-airstream-centerfeed-intake-manifold-honda-civic-k20ak20zk-series-rzcrew-1.jpg?v=1710329623","options":["Anodisation:"],"media":[{"alt":"Rzcrew Racing - Billet Airstream Centerfeed Intake Manifold - Honda - Civic K20A\/K20Z\/K series - HVAIR-H-KSCF","id":25445224448182,"position":1,"preview_image":{"aspect_ratio":1.26,"height":857,"width":1080,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-billet-airstream-centerfeed-intake-manifold-honda-civic-k20ak20zk-series-rzcrew-1.jpg?v=1710329623"},"aspect_ratio":1.26,"height":857,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-billet-airstream-centerfeed-intake-manifold-honda-civic-k20ak20zk-series-rzcrew-1.jpg?v=1710329623","width":1080},{"alt":"Rzcrew Racing - Billet Airstream Centerfeed Intake Manifold - Honda - Civic K20A\/K20Z\/K series - [variant sku] - RZCrewGarage","id":25445224480950,"position":2,"preview_image":{"aspect_ratio":1.492,"height":724,"width":1080,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-billet-airstream-centerfeed-intake-manifold-honda-civic-k20ak20zk-series-rzcrew-2.jpg?v=1710329624"},"aspect_ratio":1.492,"height":724,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-billet-airstream-centerfeed-intake-manifold-honda-civic-k20ak20zk-series-rzcrew-2.jpg?v=1710329624","width":1080},{"alt":"Rzcrew Racing - Billet Airstream Centerfeed Intake Manifold - Honda - Civic K20A\/K20Z\/K series - [variant sku] - RZCrewGarage","id":25445224513718,"position":3,"preview_image":{"aspect_ratio":1.525,"height":708,"width":1080,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-billet-airstream-centerfeed-intake-manifold-honda-civic-k20ak20zk-series-rzcrew-3.jpg?v=1710329625"},"aspect_ratio":1.525,"height":708,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-billet-airstream-centerfeed-intake-manifold-honda-civic-k20ak20zk-series-rzcrew-3.jpg?v=1710329625","width":1080},{"alt":"Rzcrew Racing - Billet Airstream Centerfeed Intake Manifold - Honda - Civic K20A\/K20Z\/K series - [variant sku] - RZCrewGarage","id":25445224546486,"position":4,"preview_image":{"aspect_ratio":1.092,"height":927,"width":1012,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-billet-airstream-centerfeed-intake-manifold-honda-civic-k20ak20zk-series-rzcrew-4.jpg?v=1710329626"},"aspect_ratio":1.092,"height":927,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-billet-airstream-centerfeed-intake-manifold-honda-civic-k20ak20zk-series-rzcrew-4.jpg?v=1710329626","width":1012}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003eReference Number: HVAIR-H-KSCF\u003cbr\u003eIntake Type: Intake Manifold\u003cbr\u003e\u003cbr\u003eThis is the Version 2 of our popular Rzcrew Racing Billet Airstream Intake Manifold for the Honda K-series. This newly re-designed Rzcrew intake manifold for the K20A and K20Z features:\u003cbr\u003e- Full Two Parts Billet construction with Symetrical plenum. The throttle body could be installed either side.\u003cbr\u003e- Heat resistant Teflon Gasket between the plenum and the runners to ensure lower intake temperature.\u003cbr\u003e-Lighweight Construction: Only 6Kg.\u003cbr\u003e- A new flange system for easy bolt-on installation.\u003cbr\u003e- Total Intake Volume is 3.2L featuring 2.2L plenum with optimised airflow for better performance. Please note that Plenum Volume could be increase in demand( payable option).\u003cbr\u003e- Center Feed Throttle body position.\u003cbr\u003e- Runners lenght are similar to the stock Manifold and Trumpets are reworked for better NA and Boosted performance along the whole power range. You also do not need to pay for extra Intake Porting.\u003cbr\u003e\u003cbr\u003eAll Rzcrew Racing Airstream Intake Manifolds feature high capacity plenums for better engine response and calculated oversized runners to ensure a faster airflow into the engine head. The flange is made to match the stock head for a seamless and turbulence-free air flow in the combustion chamber.\u003cbr\u003e\nOur proprietary AirStream technology features internal trumpets angled to optimise air flow and ensure each cylinder is fed with the same amount of air. The results are improved power along the entire rev range. You can check our flow testing in the product picture.\u003cbr\u003e\n\u003cbr\u003e\nRZCrew's Billet intake manifolds are direct-fit replacements for the original intakes and designed to work with stock or oversized throttle bodies. Please check the specifications for the supported throttle body diameter, plenum size, etc.\u003cbr\u003e\nOur manifolds are designed to be heavy duty to handle racing application without showing weaknesses or cracks.\u003cbr\u003e\n\u003cbr\u003e\nWe highly recommend to have your intake manifolds professionally installed and Tune with a standalone to get the best performance out of our intakes.\u003cbr\u003e\u003cbr\u003eWhat's in the Box:\u003cbr\u003e- Two Parts Full Billet Rzcrew Racing Airstream Technology center feed Intake Manifold.\u003cbr\u003e- Heat Resistant Teflon Plenum to Intake Gasket.\u003cbr\u003e- Heat Resistant Teflon Throttle Body Gasket.\u003cbr\u003e- Eacv Complete Billet Relocation Kit with Fitting.\u003cbr\u003e- Coolant Passage Optional relocation Kit\u003cbr\u003e- AN16 and 32mm Fittings for coolant passage. Can Be installed with Aftermarket AN1 Hoses or plug the stock OEM unit.\u003cbr\u003e- All Aluminum Fittings and Blockers.\u003cbr\u003e\u003cbr\u003eFor Na or Forced Induction applications, the RZCrew Racing Billet manifold generate between 5 to 30hp with supporting modifications (high cams, higher flow injectors, etc) and engine tuning.\u003cbr\u003eOur intake Manifold features a stock Throttle body pattern ( 70mm inlet diameter) To accomodate any Aftermarket Throttle body ( Rzcrew Racing, Skunk 2, Ktuned). Sensor wiring may need to be extended or rerouted during instalation. Vaccum lines need to be rerouted.\u003cbr\u003e\u003cbr\u003eSpecification:\u003cbr\u003eThrottle body opening (mm): 70mm ( 72, 74 or 76 mm ID are also available). For other ID contact us. It may be chargeable. During checkout let us know the throttle body pattern used ( RRC, RBC, RRB)\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Product in Development. Lead time may vary extensively. Contact us for an accurate shipping date. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R Euro | FN2R | 2009-2012 | NA | K20A | I4\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003cbr\u003eCivic Type R | FD2R | 2007-2010 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Zenki | 2002-2004 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Kouki | 2004-2006 | NA | K20A | I4\u003cbr\u003eIntegra | DC5 | 2002-2006 | NA | K20Z1 | I4\u003cbr\u003eAccord Euro R | CL7 | 2002-2008 | NA | K20A | I4\u003cbr\u003eAccord | CL9 | 2002-2008 | NA | K24A3 | I4\u003c!--split--\u003e"}

{"id":1902583578721,"title":"Rzcrew Racing - Billet Airstream Intake Manifold - Honda - Civic K20A\/K20Z\/K series","handle":"rzcrew-garage-billet-airstream-intake-manifold-k20a-k20z-k-series-hvair-h-ks","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003eReference Number: HVAIR-H-KS\u003cbr\u003eIntake Type: Intake Manifold\u003cbr\u003e\u003cbr\u003eThis is the Version 2 of our popular Rzcrew Racing Billet Airstream Intake Manifold for the Honda K-series. This newly re-designed Rzcrew intake manifold for the K20A and K20Z features:\u003cbr\u003e- Full Two Parts Billet construction with Symetrical plenum. The throttle body could be installed either side.\u003cbr\u003e- Heat resistant Teflon Gasket between the plenum and the runners to ensure lower intake temperature.\u003cbr\u003e-Lighweight Construction: Only 6Kg.\u003cbr\u003e- A new flange system for easy bolt-on installation.\u003cbr\u003e- Total Intake Volume is 4.2L featuring 2.2L plenum with optimised airflow for better performance. Please note that Plenum Volume could be increase in demand( payable option).\u003cbr\u003e- Air Temp sensor hole available.\u003cbr\u003e- Runners lenght are similar to the stock Manifold and Trumpets are reworked for better NA and Boosted performance along the whole power range. You also do not need to pay for extra Intake Porting.\u003cbr\u003e\u003cbr\u003eAll Rzcrew Racing Airstream Intake Manifolds feature high capacity plenums for better engine response and calculated oversized runners to ensure a faster airflow into the engine head. The flange is made to match the stock head for a seamless and turbulence-free air flow in the combustion chamber.\u003cbr\u003e\nOur proprietary AirStream technology features internal trumpets angled to optimise air flow and ensure each cylinder is fed with the same amount of air. The results are improved power along the entire rev range. You can check our flow testing in the product picture.\u003cbr\u003e\n\u003cbr\u003e\nRZCrew's Billet intake manifolds are direct-fit replacements for the original intakes and designed to work with stock or oversized throttle bodies. Please check the specifications for the supported throttle body diameter, plenum size, etc.\u003cbr\u003e\nOur manifolds are designed to be heavy duty to handle racing application without showing weaknesses or cracks.\u003cbr\u003e\n\u003cbr\u003e\nWe highly recommend to have your intake manifolds professionally installed and Tune with a standalone to get the best performance out of our intakes.\u003cbr\u003e\u003cbr\u003eWhat's in the Box:\u003cbr\u003e- Two Parts Full Billet Rzcrew Racing Airstream Technology Intake Manifold.\u003cbr\u003e- Heat Resistant Teflon Plenum to Intake Gasket.\u003cbr\u003e- Heat Resistant Teflon Throttle Body Gasket.\u003cbr\u003e- All Aluminum Fittings and Blockers.\u003cbr\u003e\u003cbr\u003eFor Na or Forced Induction applications, the RZCrew Racing Billet manifold generate between 5 to 30hp with supporting modifications (high cams, higher flow injectors, etc) and engine tuning.\u003cbr\u003eOur intake Manifold features a stock Throttle body pattern ( 70mm inlet diameter) To accomodate any Aftermarket Throttle body ( Rzcrew Racing, Skunk 2, Ktuned). Sensor wiring may need to be extended or rerouted during instalation. Vaccum lines need to be rerouted.\u003cbr\u003e\u003cbr\u003eSpecification:\u003cbr\u003eThrottle body opening (mm): 70mm ( 72, 74 or 76 mm ID are also available). For other ID contact us. It may be chargeable. During checkout let us know the throttle body pattern used ( RRC, RBC, RRB)\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Product in Development. Lead time may vary extensively. Contact us for an accurate shipping date. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R Euro | FN2R | 2009-2012 | NA | K20A | I4\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003cbr\u003eCivic Type R | FD2R | 2007-2010 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Zenki | 2002-2004 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Kouki | 2004-2006 | NA | K20A | I4\u003cbr\u003eIntegra | DC5 | 2002-2006 | NA | K20Z1 | I4\u003cbr\u003eAccord Euro R | CL7 | 2002-2008 | NA | K20A | I4\u003cbr\u003eAccord | CL9 | 2002-2008 | NA | K24A3 | I4\u003c!--split--\u003e","published_at":"2018-11-20T12:09:59+08:00","created_at":"2018-11-20T12:10:00+08:00","vendor":"Rzcrew Racing","type":"Intake Manifolds","tags":["2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","accord-cl9-2002-2008-na-k24a3-i4","accord-euro-r-cl7-2002-2008-na-k20a-i4","civic-type-r-ep3-2001-2005-na-k20a-i4","civic-type-r-euro-fn2r-2009-2012-na-k20a-i4","civic-type-r-fd2r-2007-2010-na-k20a-i4","honda","intake","intake-manifold","intake-manifolds","integra-dc5-2002-2006-na-k20z1-i4","integra-type-r-dc5r-kouki-2004-2006-na-k20a-i4","integra-type-r-dc5r-zenki-2002-2004-na-k20a-i4","manifolds","rzcrew-garage","rzcrew-racing","sg1","ws130"],"price":83300,"price_min":83300,"price_max":95900,"available":true,"price_varies":true,"compare_at_price":119000,"compare_at_price_min":119000,"compare_at_price_max":137000,"compare_at_price_varies":true,"variants":[{"id":37404481716406,"title":"Silver","option1":"Silver","option2":null,"option3":null,"sku":"HVAIR-H-KS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Billet Airstream Intake Manifold - Honda - Civic K20A\/K20Z\/K series - Silver","public_title":"Silver","options":["Silver"],"price":83300,"weight":8000,"compare_at_price":119000,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":37404481749174,"title":"1 Colour ( Full intake Anodisation)","option1":"1 Colour ( Full intake Anodisation)","option2":null,"option3":null,"sku":"HVAIR-H-KS-C","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Billet Airstream Intake Manifold - Honda - Civic K20A\/K20Z\/K series - 1 Colour ( Full intake Anodisation)","public_title":"1 Colour ( Full intake Anodisation)","options":["1 Colour ( Full intake Anodisation)"],"price":89600,"weight":8000,"compare_at_price":128000,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":37404481781942,"title":"2 Colours ( Runner and plenum colours are different)","option1":"2 Colours ( Runner and plenum colours are different)","option2":null,"option3":null,"sku":"HVAIR-H-KS-C-C","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Billet Airstream Intake Manifold - Honda - Civic K20A\/K20Z\/K series - 2 Colours ( Runner and plenum colours are different)","public_title":"2 Colours ( Runner and plenum colours are different)","options":["2 Colours ( Runner and plenum colours are different)"],"price":95900,"weight":8000,"compare_at_price":137000,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/IMG-20240202-WA0015.jpg?v=1710168399","\/\/rzcrewgarage.com\/cdn\/shop\/files\/IMG-20240202-WA0018.jpg?v=1710168401","\/\/rzcrewgarage.com\/cdn\/shop\/files\/IMG-20240202-WA0016.jpg?v=1710168403","\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Airstream_Intake_Manifold_Injector_fitting_Honda_K_series_K20_K24_d8421373-4279-4bf8-b8d1-272ba906fd55.jpg?v=1710168406","\/\/rzcrewgarage.com\/cdn\/shop\/files\/IMG-20240202-WA0017.jpg?v=1706854393","\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Intake_Manifold_flow_testing_Honda_K_series_K20_K24_767a241a-203e-4c6f-9f1d-9099f6996ef2.jpg?v=1710168410","\/\/rzcrewgarage.com\/cdn\/shop\/products\/Anodisation-Colours_cde02079-ebbc-4b47-a0ca-ba1e817d5ba9.jpg?v=1710168412"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/IMG-20240202-WA0015.jpg?v=1710168399","options":["Anodisation:"],"media":[{"alt":"Rzcrew Racing - Billet Airstream Intake Manifold - Honda - Civic K20A\/K20Z\/K series - [variant sku] - RZCrewGarage","id":27138860777654,"position":1,"preview_image":{"aspect_ratio":0.75,"height":1600,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/IMG-20240202-WA0015.jpg?v=1710168399"},"aspect_ratio":0.75,"height":1600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/IMG-20240202-WA0015.jpg?v=1710168399","width":1200},{"alt":"Rzcrew Racing - Billet Airstream Intake Manifold - Honda - Civic K20A\/K20Z\/K series - [variant sku] - RZCrewGarage","id":27138860679350,"position":2,"preview_image":{"aspect_ratio":0.749,"height":1600,"width":1198,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/IMG-20240202-WA0018.jpg?v=1710168401"},"aspect_ratio":0.749,"height":1600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/IMG-20240202-WA0018.jpg?v=1710168401","width":1198},{"alt":"Rzcrew Racing - Billet Airstream Intake Manifold - Honda - Civic K20A\/K20Z\/K series - [variant sku] - RZCrewGarage","id":27138860744886,"position":3,"preview_image":{"aspect_ratio":0.75,"height":1600,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/IMG-20240202-WA0016.jpg?v=1710168403"},"aspect_ratio":0.75,"height":1600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/IMG-20240202-WA0016.jpg?v=1710168403","width":1200},{"alt":"Rzcrew Racing - Billet Airstream Intake Manifold - Honda - Civic K20A\/K20Z\/K series - [variant sku] - RZCrewGarage","id":25445225463990,"position":4,"preview_image":{"aspect_ratio":1.509,"height":1060,"width":1600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Airstream_Intake_Manifold_Injector_fitting_Honda_K_series_K20_K24_d8421373-4279-4bf8-b8d1-272ba906fd55.jpg?v=1710168406"},"aspect_ratio":1.509,"height":1060,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Airstream_Intake_Manifold_Injector_fitting_Honda_K_series_K20_K24_d8421373-4279-4bf8-b8d1-272ba906fd55.jpg?v=1710168406","width":1600},{"alt":"Rzcrew Racing - Billet Airstream Intake Manifold - Honda - Civic K20A\/K20Z\/K series - [variant sku] - RZCrewGarage","id":27138860712118,"position":5,"preview_image":{"aspect_ratio":0.75,"height":1600,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/IMG-20240202-WA0017.jpg?v=1706854393"},"aspect_ratio":0.75,"height":1600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/IMG-20240202-WA0017.jpg?v=1706854393","width":1200},{"alt":"Rzcrew Racing - Billet Airstream Intake Manifold - Honda - Civic K20A\/K20Z\/K series - [variant sku] - RZCrewGarage","id":25445225365686,"position":6,"preview_image":{"aspect_ratio":1.141,"height":1100,"width":1255,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Intake_Manifold_flow_testing_Honda_K_series_K20_K24_767a241a-203e-4c6f-9f1d-9099f6996ef2.jpg?v=1710168410"},"aspect_ratio":1.141,"height":1100,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Racing_Billet_Intake_Manifold_flow_testing_Honda_K_series_K20_K24_767a241a-203e-4c6f-9f1d-9099f6996ef2.jpg?v=1710168410","width":1255},{"alt":"Rzcrew Racing - Billet Airstream Intake Manifold - Honda - Civic K20A\/K20Z\/K series - [variant sku] - RZCrewGarage","id":25445225496758,"position":7,"preview_image":{"aspect_ratio":1.092,"height":927,"width":1012,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Anodisation-Colours_cde02079-ebbc-4b47-a0ca-ba1e817d5ba9.jpg?v=1710168412"},"aspect_ratio":1.092,"height":927,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Anodisation-Colours_cde02079-ebbc-4b47-a0ca-ba1e817d5ba9.jpg?v=1710168412","width":1012}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003eReference Number: HVAIR-H-KS\u003cbr\u003eIntake Type: Intake Manifold\u003cbr\u003e\u003cbr\u003eThis is the Version 2 of our popular Rzcrew Racing Billet Airstream Intake Manifold for the Honda K-series. This newly re-designed Rzcrew intake manifold for the K20A and K20Z features:\u003cbr\u003e- Full Two Parts Billet construction with Symetrical plenum. The throttle body could be installed either side.\u003cbr\u003e- Heat resistant Teflon Gasket between the plenum and the runners to ensure lower intake temperature.\u003cbr\u003e-Lighweight Construction: Only 6Kg.\u003cbr\u003e- A new flange system for easy bolt-on installation.\u003cbr\u003e- Total Intake Volume is 4.2L featuring 2.2L plenum with optimised airflow for better performance. Please note that Plenum Volume could be increase in demand( payable option).\u003cbr\u003e- Air Temp sensor hole available.\u003cbr\u003e- Runners lenght are similar to the stock Manifold and Trumpets are reworked for better NA and Boosted performance along the whole power range. You also do not need to pay for extra Intake Porting.\u003cbr\u003e\u003cbr\u003eAll Rzcrew Racing Airstream Intake Manifolds feature high capacity plenums for better engine response and calculated oversized runners to ensure a faster airflow into the engine head. The flange is made to match the stock head for a seamless and turbulence-free air flow in the combustion chamber.\u003cbr\u003e\nOur proprietary AirStream technology features internal trumpets angled to optimise air flow and ensure each cylinder is fed with the same amount of air. The results are improved power along the entire rev range. You can check our flow testing in the product picture.\u003cbr\u003e\n\u003cbr\u003e\nRZCrew's Billet intake manifolds are direct-fit replacements for the original intakes and designed to work with stock or oversized throttle bodies. Please check the specifications for the supported throttle body diameter, plenum size, etc.\u003cbr\u003e\nOur manifolds are designed to be heavy duty to handle racing application without showing weaknesses or cracks.\u003cbr\u003e\n\u003cbr\u003e\nWe highly recommend to have your intake manifolds professionally installed and Tune with a standalone to get the best performance out of our intakes.\u003cbr\u003e\u003cbr\u003eWhat's in the Box:\u003cbr\u003e- Two Parts Full Billet Rzcrew Racing Airstream Technology Intake Manifold.\u003cbr\u003e- Heat Resistant Teflon Plenum to Intake Gasket.\u003cbr\u003e- Heat Resistant Teflon Throttle Body Gasket.\u003cbr\u003e- All Aluminum Fittings and Blockers.\u003cbr\u003e\u003cbr\u003eFor Na or Forced Induction applications, the RZCrew Racing Billet manifold generate between 5 to 30hp with supporting modifications (high cams, higher flow injectors, etc) and engine tuning.\u003cbr\u003eOur intake Manifold features a stock Throttle body pattern ( 70mm inlet diameter) To accomodate any Aftermarket Throttle body ( Rzcrew Racing, Skunk 2, Ktuned). Sensor wiring may need to be extended or rerouted during instalation. Vaccum lines need to be rerouted.\u003cbr\u003e\u003cbr\u003eSpecification:\u003cbr\u003eThrottle body opening (mm): 70mm ( 72, 74 or 76 mm ID are also available). For other ID contact us. It may be chargeable. During checkout let us know the throttle body pattern used ( RRC, RBC, RRB)\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Product in Development. Lead time may vary extensively. Contact us for an accurate shipping date. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R Euro | FN2R | 2009-2012 | NA | K20A | I4\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003cbr\u003eCivic Type R | FD2R | 2007-2010 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Zenki | 2002-2004 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Kouki | 2004-2006 | NA | K20A | I4\u003cbr\u003eIntegra | DC5 | 2002-2006 | NA | K20Z1 | I4\u003cbr\u003eAccord Euro R | CL7 | 2002-2008 | NA | K20A | I4\u003cbr\u003eAccord | CL9 | 2002-2008 | NA | K24A3 | I4\u003c!--split--\u003e"}

{"id":7804302000310,"title":"Rzcrew Racing - High-power ignition coils - Honda Civic Type R EP3","handle":"rzcrew-racing-high-power-ignition-coils-honda-civic-type-r-ep3-rz-ic-kseries","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003ePart Number: RZ-IC-Kseries\u003cbr\u003eIgnition Type: Direct Ignition Coil\u003cbr\u003eEngine Type: K20A\u003cbr\u003e\u003cbr\u003eIgnition coils supply the spark plugs with the power to create a spark, causing your engine to combust the air and fuel in the combustion chamber. A quality set of ignition coils will supply your engine with a good spark, reducing the chance of a misfire. \u003cbr\u003e\u003cbr\u003eThe Rzcrew Racing High Ignition Coil Blaster is a direct replacement for the stock units. It produces 2 times more spark energy than stock coils and also generates an ultra fast multi-spark discharge of 5 sparks up to the highest RPM. The spark amperage is increased by 30%, allowing the spark to reach many more molecules and therefore accelerate the ignition and combustion process. This is extremely important in forced induction applications but also improves the performance of normally aspirated engines. Rzcrew Racing High Ignition Coil Blaster will increase horsepower and torque throughout the entire rpm range. This upgrade will also reduce fuel consumption. Even the engines with legendary smoothness will be further refined with the Rzcrew Racing High Ignition Coil Blaster upgrade. Installation is easy. Direct bolt-in to the engine, no splicing or cutting into stock wiring, simply replace the stock coils with our Plasma Direct Coils, and ready to go!\u003cbr\u003eProduct Picture may differ.\u003cbr\u003eOur product Features:\u003cbr\u003e- Improved Combustion\u003cbr\u003e\n- 30% Higher Amperage for the Initial Spark Discharge Increasing Ignition Performance. Increased BHP and Fuel economy\u003cbr\u003e\n- Constantly stabilize provision of the sparks and prevent malfunction, abnormal noises are eliminatedresulting in Improved throttle response and smoothness\u003cbr\u003e\n- High efficiency combustion can be created without missfire at higher boost or in High RPM ranges\u003cbr\u003e\n- Direct Bolt in part \/ No modifications required\u003cbr\u003e\n- 1 Year Warranty\u003cbr\u003e-Compatible with all Rzcrew Racing Coil on plug Kit\u003cbr\u003eDyno tested on our Rzcrew Racing K20 making +5.5WHP and +1.7NM over the stock Genuine Honda Coils\u003cbr\u003e\n- EXCEED OEM PERFORMANCE COILS\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003c!--split--\u003e","published_at":"2024-03-15T15:52:12+08:00","created_at":"2024-03-15T15:41:57+08:00","vendor":"Rzcrew Racing","type":"Ignition Coils Booster and Cables","tags":["2001","2002","2003","2004","2005","4","civic-type-r-ep3-2001-2005-na-k20a-i4","direct-ignition-coil","EP3","honda","ignition-coils-booster-and-cables","rzcrew-garage","rzcrew-racing","sg1","ws130"],"price":20510,"price_min":20510,"price_max":20510,"available":true,"price_varies":false,"compare_at_price":29300,"compare_at_price_min":29300,"compare_at_price_max":29300,"compare_at_price_varies":false,"variants":[{"id":42792571470006,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RZ-IC-Kseries","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - High-power ignition coils - Honda Civic Type R EP3","public_title":null,"options":["Default Title"],"price":20510,"weight":2000,"compare_at_price":29300,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/IMG-20240307-WA0024_bc2301d9-13d3-487a-ae0f-c45fa9dca2f6.jpg?v=1710488518","\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Racing_High-power_ignition_coil_Dyno_test_on_Honda_K20_471b7a8d-23dd-410c-8e0c-3f3de4d7140b.jpg?v=1710488518","\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Racing_High-power_ignition_coil_Dyno_test_installation_on_K_series_engine_3dae6c33-1860-4623-b286-d59196b1ccd4.jpg?v=1710488518"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/IMG-20240307-WA0024_bc2301d9-13d3-487a-ae0f-c45fa9dca2f6.jpg?v=1710488518","options":["Title"],"media":[{"alt":"Rzcrew Racing - High-power ignition coils - Honda Civic Type R EP3 - RZ-IC-Kseries","id":27401757851830,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1536,"width":2048,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/IMG-20240307-WA0024_bc2301d9-13d3-487a-ae0f-c45fa9dca2f6.jpg?v=1710488518"},"aspect_ratio":1.333,"height":1536,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/IMG-20240307-WA0024_bc2301d9-13d3-487a-ae0f-c45fa9dca2f6.jpg?v=1710488518","width":2048},{"alt":"Rzcrew Racing - High-power ignition coils - Honda Civic Type R EP3 - RZ-IC-Kseries","id":27401757884598,"position":2,"preview_image":{"aspect_ratio":1.388,"height":1153,"width":1600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Racing_High-power_ignition_coil_Dyno_test_on_Honda_K20_471b7a8d-23dd-410c-8e0c-3f3de4d7140b.jpg?v=1710488518"},"aspect_ratio":1.388,"height":1153,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Racing_High-power_ignition_coil_Dyno_test_on_Honda_K20_471b7a8d-23dd-410c-8e0c-3f3de4d7140b.jpg?v=1710488518","width":1600},{"alt":"Rzcrew Racing - High-power ignition coils - Honda Civic Type R EP3 - RZ-IC-Kseries","id":27401757950134,"position":3,"preview_image":{"aspect_ratio":0.75,"height":1600,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Racing_High-power_ignition_coil_Dyno_test_installation_on_K_series_engine_3dae6c33-1860-4623-b286-d59196b1ccd4.jpg?v=1710488518"},"aspect_ratio":0.75,"height":1600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Rzcrew_Racing_High-power_ignition_coil_Dyno_test_installation_on_K_series_engine_3dae6c33-1860-4623-b286-d59196b1ccd4.jpg?v=1710488518","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003ePart Number: RZ-IC-Kseries\u003cbr\u003eIgnition Type: Direct Ignition Coil\u003cbr\u003eEngine Type: K20A\u003cbr\u003e\u003cbr\u003eIgnition coils supply the spark plugs with the power to create a spark, causing your engine to combust the air and fuel in the combustion chamber. A quality set of ignition coils will supply your engine with a good spark, reducing the chance of a misfire. \u003cbr\u003e\u003cbr\u003eThe Rzcrew Racing High Ignition Coil Blaster is a direct replacement for the stock units. It produces 2 times more spark energy than stock coils and also generates an ultra fast multi-spark discharge of 5 sparks up to the highest RPM. The spark amperage is increased by 30%, allowing the spark to reach many more molecules and therefore accelerate the ignition and combustion process. This is extremely important in forced induction applications but also improves the performance of normally aspirated engines. Rzcrew Racing High Ignition Coil Blaster will increase horsepower and torque throughout the entire rpm range. This upgrade will also reduce fuel consumption. Even the engines with legendary smoothness will be further refined with the Rzcrew Racing High Ignition Coil Blaster upgrade. Installation is easy. Direct bolt-in to the engine, no splicing or cutting into stock wiring, simply replace the stock coils with our Plasma Direct Coils, and ready to go!\u003cbr\u003eProduct Picture may differ.\u003cbr\u003eOur product Features:\u003cbr\u003e- Improved Combustion\u003cbr\u003e\n- 30% Higher Amperage for the Initial Spark Discharge Increasing Ignition Performance. Increased BHP and Fuel economy\u003cbr\u003e\n- Constantly stabilize provision of the sparks and prevent malfunction, abnormal noises are eliminatedresulting in Improved throttle response and smoothness\u003cbr\u003e\n- High efficiency combustion can be created without missfire at higher boost or in High RPM ranges\u003cbr\u003e\n- Direct Bolt in part \/ No modifications required\u003cbr\u003e\n- 1 Year Warranty\u003cbr\u003e-Compatible with all Rzcrew Racing Coil on plug Kit\u003cbr\u003eDyno tested on our Rzcrew Racing K20 making +5.5WHP and +1.7NM over the stock Genuine Honda Coils\u003cbr\u003e\n- EXCEED OEM PERFORMANCE COILS\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003c!--split--\u003e"}

{"id":4514314453089,"title":"Rzcrew Racing - Thermal Intake Manifold Gasket - Honda - Civic K20A\/K20Z","handle":"rzcrew-garage-thermal-intake-manifold-gasket-k20a-k20z-rzig-h-ep","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003eReference Number: RZIG-H-EP\u003cbr\u003eIntake Type: Intake Manifold\u003cbr\u003e\u003cbr\u003eRzcrewGarage Thermal Throttle Body and Intake Manifold Gaskets are designed as direct replacements for OEM gaskets. Using an advanced high temperature thermal nylon material protects against heat soak and maximizes horsepower gains by reducing heat transfer. With the use of RzcrewGarage thermal gaskets, air intake temps are minimized which provides the your engine cooler air for combustion, and that means horsepower. This and bypassing several heat sources can provide you up to 5% more power. Our Racing Thermal Throttle Body gaskets are perfect for your race, weekend warrior and street application.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAccord Euro R | CL7 | 2002-2008 | NA | K20A | I4\u003cbr\u003eAccord | CL8 | 2002-2005 | NA | K20A | I4\u003cbr\u003eAccord Wagon | CM1 | 2004-2005 | NA | K20A | I4\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003cbr\u003eCR-V | RD4 | 2002-2006 | NA | K20A | I4\u003cbr\u003eCR-V | RD5 | 2002-2006 | NA | K20A | I4\u003cbr\u003eEdix | BE3 | 2004-2006 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Zenki | 2002-2004 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Kouki | 2004-2006 | NA | K20A | I4\u003cbr\u003eIntegra | DC5 | 2002-2006 | NA | K20Z1 | I4\u003c!--split--\u003e","published_at":"2020-02-22T22:51:01+08:00","created_at":"2020-02-22T22:51:03+08:00","vendor":"Rzcrew Racing","type":"Intake Manifold Gasket","tags":["2001","2002","2003","2004","2005","2006","accord-cl8-2002-2005-na-k20a-i4","accord-euro-r-cl7-2002-2008-na-k20a-i4","accord-wagon-cm1-2004-2005-na-k20a-i4","civic-type-r-ep3-2001-2005-na-k20a-i4","cr-v-rd4-2002-2006-na-k20a-i4","cr-v-rd5-2002-2006-na-k20a-i4","edix-be3-2004-2006-na-k20a-i4","honda","intake","intake-manifold","intake-manifold-gasket","intake-manifolds","integra-dc5-2002-2006-na-k20z1-i4","integra-type-r-dc5r-kouki-2004-2006-na-k20a-i4","integra-type-r-dc5r-zenki-2002-2004-na-k20a-i4","K20A\/K20Z","rzcrew-garage","rzcrew-racing","sg1","ws130"],"price":3430,"price_min":3430,"price_max":3430,"available":true,"price_varies":false,"compare_at_price":4900,"compare_at_price_min":4900,"compare_at_price_max":4900,"compare_at_price_varies":false,"variants":[{"id":31841540997217,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RZIG-H-EP","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - Thermal Intake Manifold Gasket - Honda - Civic K20A\/K20Z","public_title":null,"options":["Default Title"],"price":3430,"weight":550,"compare_at_price":4900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Gasket-K20_4fe22ba9-9d53-4b22-8da8-cc892e8016f6.jpg?v=1710191268"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Gasket-K20_4fe22ba9-9d53-4b22-8da8-cc892e8016f6.jpg?v=1710191268","options":["Title"],"media":[{"alt":"Rzcrew Garage - Thermal Intake Manifold Gasket - K20A\/K20Z - RZIG-H-EP","id":25445229265078,"position":1,"preview_image":{"aspect_ratio":3.62,"height":200,"width":724,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Gasket-K20_4fe22ba9-9d53-4b22-8da8-cc892e8016f6.jpg?v=1710191268"},"aspect_ratio":3.62,"height":200,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Gasket-K20_4fe22ba9-9d53-4b22-8da8-cc892e8016f6.jpg?v=1710191268","width":724}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003eReference Number: RZIG-H-EP\u003cbr\u003eIntake Type: Intake Manifold\u003cbr\u003e\u003cbr\u003eRzcrewGarage Thermal Throttle Body and Intake Manifold Gaskets are designed as direct replacements for OEM gaskets. Using an advanced high temperature thermal nylon material protects against heat soak and maximizes horsepower gains by reducing heat transfer. With the use of RzcrewGarage thermal gaskets, air intake temps are minimized which provides the your engine cooler air for combustion, and that means horsepower. This and bypassing several heat sources can provide you up to 5% more power. Our Racing Thermal Throttle Body gaskets are perfect for your race, weekend warrior and street application.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAccord Euro R | CL7 | 2002-2008 | NA | K20A | I4\u003cbr\u003eAccord | CL8 | 2002-2005 | NA | K20A | I4\u003cbr\u003eAccord Wagon | CM1 | 2004-2005 | NA | K20A | I4\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003cbr\u003eCR-V | RD4 | 2002-2006 | NA | K20A | I4\u003cbr\u003eCR-V | RD5 | 2002-2006 | NA | K20A | I4\u003cbr\u003eEdix | BE3 | 2004-2006 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Zenki | 2002-2004 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Kouki | 2004-2006 | NA | K20A | I4\u003cbr\u003eIntegra | DC5 | 2002-2006 | NA | K20Z1 | I4\u003c!--split--\u003e"}

{"id":4702060970081,"title":"Rzcrew Racing Billet Intake Flange - Honda - Civic K20A\/K20Z\/K series","handle":"rzcrew-racing-billet-intake-flange-honda-civic-k20a-k20z-k-series","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Garage\u003cbr\u003eReference Number: FL-H-K20Z2\u003cbr\u003eBillet Intake Flange\u003cbr\u003e\u003cbr\u003eThis is RZCrew's Billet Intake Flange, available on its own for DIY projects.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Product in Development. Lead time may vary extensively. Contact us for an accurate shipping date. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R Euro | FN2R | 2009-2012 | NA | K20A | I4\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003cbr\u003eCivic Type R | FD2R | 2007-2010 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Zenki | 2002-2004 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Kouki | 2004-2006 | NA | K20A | I4\u003cbr\u003eIntegra | DC5 | 2002-2006 | NA | K20Z1 | I4\u003cbr\u003eAccord Euro R | CL7 | 2002-2008 | NA | K20A | I4\u003cbr\u003eAccord | CL9 | 2002-2008 | NA | K24A3 | I4\u003c!--split--\u003e","published_at":"2020-07-14T17:11:56+08:00","created_at":"2020-07-14T17:11:57+08:00","vendor":"Rzcrew Racing","type":"Intake Manifolds","tags":["2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","accord-cl9-2002-2008-na-k24a3-i4","accord-euro-r-cl7-2002-2008-na-k20a-i4","civic-type-r-ep3-2001-2005-na-k20a-i4","civic-type-r-euro-fn2r-2009-2012-na-k20a-i4","civic-type-r-fd2r-2007-2010-na-k20a-i4","honda","intake","intake-manifold","intake-manifolds","integra-dc5-2002-2006-na-k20z1-i4","integra-type-r-dc5r-kouki-2004-2006-na-k20a-i4","integra-type-r-dc5r-zenki-2002-2004-na-k20a-i4","manifolds","rzcrew-garage","rzcrew-racing","sg1","ws125"],"price":11175,"price_min":11175,"price_max":11175,"available":true,"price_varies":false,"compare_at_price":14900,"compare_at_price_min":14900,"compare_at_price_max":14900,"compare_at_price_varies":false,"variants":[{"id":32544221036641,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FL-H-K20Z2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Intake Flange - Honda - Civic K20A\/K20Z\/K series","public_title":null,"options":["Default Title"],"price":11175,"weight":4500,"compare_at_price":14900,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Coming_Soon_390e068e-7d42-4293-9a19-c4e360a8c2fa.jpg?v=1710192695"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Coming_Soon_390e068e-7d42-4293-9a19-c4e360a8c2fa.jpg?v=1710192695","options":["Title"],"media":[{"alt":"Rzcrew Racing Billet Intake Flange - Honda - Civic K20A\/K20Z\/K series","id":25445238603958,"position":1,"preview_image":{"aspect_ratio":1.333,"height":600,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Coming_Soon_390e068e-7d42-4293-9a19-c4e360a8c2fa.jpg?v=1710192695"},"aspect_ratio":1.333,"height":600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Coming_Soon_390e068e-7d42-4293-9a19-c4e360a8c2fa.jpg?v=1710192695","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Garage\u003cbr\u003eReference Number: FL-H-K20Z2\u003cbr\u003eBillet Intake Flange\u003cbr\u003e\u003cbr\u003eThis is RZCrew's Billet Intake Flange, available on its own for DIY projects.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Product in Development. Lead time may vary extensively. Contact us for an accurate shipping date. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R Euro | FN2R | 2009-2012 | NA | K20A | I4\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003cbr\u003eCivic Type R | FD2R | 2007-2010 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Zenki | 2002-2004 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Kouki | 2004-2006 | NA | K20A | I4\u003cbr\u003eIntegra | DC5 | 2002-2006 | NA | K20Z1 | I4\u003cbr\u003eAccord Euro R | CL7 | 2002-2008 | NA | K20A | I4\u003cbr\u003eAccord | CL9 | 2002-2008 | NA | K24A3 | I4\u003c!--split--\u003e"}

{"id":4702059528289,"title":"Rzcrew Racing Billet Intake Flange - Honda - Civic Type R EP3","handle":"rzcrew-racing-billet-intake-flange-honda-civic-type-r-ep3","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003eReference Number: FL-H-K20A\u003cbr\u003eBillet Intake Flange\u003cbr\u003e\u003cbr\u003eThis is RZCrew's Billet Intake Flange, available on its own for DIY projects.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003c!--split--\u003e","published_at":"2020-07-14T17:11:20+08:00","created_at":"2020-07-14T17:11:20+08:00","vendor":"Rzcrew Racing","type":"Intake Manifolds","tags":["2001","2002","2003","2004","2005","civic-type-r-ep3-2001-2005-na-k20a-i4","honda","intake","intake-manifold","intake-manifolds","manifolds","rzcrew-garage","rzcrew-racing","sg1","ws125"],"price":11175,"price_min":11175,"price_max":11175,"available":true,"price_varies":false,"compare_at_price":14900,"compare_at_price_min":14900,"compare_at_price_max":14900,"compare_at_price_varies":false,"variants":[{"id":32544219594849,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FL-H-K20A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Billet Intake Flange - Honda - Civic Type R EP3","public_title":null,"options":["Default Title"],"price":11175,"weight":4500,"compare_at_price":14900,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Coming_Soon_7539403c-65d1-44d1-9a28-6e35b14ee080.jpg?v=1710192669"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Coming_Soon_7539403c-65d1-44d1-9a28-6e35b14ee080.jpg?v=1710192669","options":["Title"],"media":[{"alt":"Rzcrew Racing Billet Intake Flange - Honda - Civic Type R EP3","id":25445233393846,"position":1,"preview_image":{"aspect_ratio":1.333,"height":600,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Coming_Soon_7539403c-65d1-44d1-9a28-6e35b14ee080.jpg?v=1710192669"},"aspect_ratio":1.333,"height":600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Coming_Soon_7539403c-65d1-44d1-9a28-6e35b14ee080.jpg?v=1710192669","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003eReference Number: FL-H-K20A\u003cbr\u003eBillet Intake Flange\u003cbr\u003e\u003cbr\u003eThis is RZCrew's Billet Intake Flange, available on its own for DIY projects.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003c!--split--\u003e"}

{"id":7607215063222,"title":"Rzcrew Racing Throttle Position Sensor Tps - Honda - K20A\/K20Z\/K series","handle":"rzcrew-racing-rz-k20tps","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003eReference Number: RZ-K20TPS\u003cbr\u003eType: Throttle Bodies\u003cbr\u003e\u003cbr\u003eOEM Style K series TPS, made to work on a harsh environment.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R Euro | FN2R | 2009-2012 | NA | K20A | I4\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003cbr\u003eCivic Type R | FD2R | 2007-2010 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Zenki | 2002-2004 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Kouki | 2004-2006 | NA | K20A | I4\u003cbr\u003eIntegra | DC5 | 2002-2006 | NA | K20Z1 | I4\u003cbr\u003eAccord Euro R | CL7 | 2002-2008 | NA | K20A | I4\u003cbr\u003eAccord | CL9 | 2002-2008 | NA | K24A3 | I4\u003c!--split--\u003e","published_at":"2023-06-08T15:41:11+08:00","created_at":"2023-06-08T15:37:48+08:00","vendor":"Rzcrew Racing","type":"Intake Manifolds","tags":["2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","accord-cl9-2002-2008-na-k24a3-i4","accord-euro-r-cl7-2002-2008-na-k20a-i4","civic-type-r-ep3-2001-2005-na-k20a-i4","civic-type-r-euro-fn2r-2009-2012-na-k20a-i4","civic-type-r-fd2r-2007-2010-na-k20a-i4","honda","intake","intake-manifolds","integra-dc5-2002-2006-na-k20z1-i4","integra-type-r-dc5r-kouki-2004-2006-na-k20a-i4","integra-type-r-dc5r-zenki-2002-2004-na-k20a-i4","manifolds","rzcrew-garage","rzcrew-racing","sg1","throttle-bodies","ws140"],"price":1800,"price_min":1800,"price_max":1800,"available":true,"price_varies":false,"compare_at_price":3000,"compare_at_price_min":3000,"compare_at_price_max":3000,"compare_at_price_varies":false,"variants":[{"id":42262256091318,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RZ-K20TPS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing Throttle Position Sensor Tps - Honda - K20A\/K20Z\/K series","public_title":null,"options":["Default Title"],"price":1800,"weight":1200,"compare_at_price":3000,"inventory_quantity":37,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-throttle-position-sensor-tps-honda-k20ak20zk-series-rzcrew.jpg?v=1710316834"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-throttle-position-sensor-tps-honda-k20ak20zk-series-rzcrew.jpg?v=1710316834","options":["Title"],"media":[{"alt":"Rzcrew Racing-RZ-K20TPS","id":26297183928502,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2048,"width":2048,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-throttle-position-sensor-tps-honda-k20ak20zk-series-rzcrew.jpg?v=1710316834"},"aspect_ratio":1.0,"height":2048,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-throttle-position-sensor-tps-honda-k20ak20zk-series-rzcrew.jpg?v=1710316834","width":2048}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003eReference Number: RZ-K20TPS\u003cbr\u003eType: Throttle Bodies\u003cbr\u003e\u003cbr\u003eOEM Style K series TPS, made to work on a harsh environment.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R Euro | FN2R | 2009-2012 | NA | K20A | I4\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003cbr\u003eCivic Type R | FD2R | 2007-2010 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Zenki | 2002-2004 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Kouki | 2004-2006 | NA | K20A | I4\u003cbr\u003eIntegra | DC5 | 2002-2006 | NA | K20Z1 | I4\u003cbr\u003eAccord Euro R | CL7 | 2002-2008 | NA | K20A | I4\u003cbr\u003eAccord | CL9 | 2002-2008 | NA | K24A3 | I4\u003c!--split--\u003e"}

{"id":2095446294625,"title":"Samco Japan - 2 Pcs Cooling Hoses Set Radiator - Honda - Civic Type R EP3","handle":"samco-japan-2-pcs-cooling-hoses-set-radiator-honda-civic-type-r-ep3-40tcs203-c","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Samco Japan\u003cbr\u003ePart Number: 40TCS203\/C\u003cbr\u003eHose Type: Cooling Hoses\u003cbr\u003eHose Numbers per set: 2\u003cbr\u003eHose Colour (Please leave us a note during checkout): Standard color:\tBlue \/ Red \/ Black \/ Green \/ Yellow \/ Orange\u003cbr\u003e\u003cbr\u003eSamco is the leader in the Cooling hose system for a reason. Their Unique 3 to 5 plies design ensure long lasting qualities to any type of usages: Boost, Cooling, Fueling. Their design is composed of:\u003cbr\u003eOuter surface coating to resist extreem deterioration to heat or cold.\u003cbr\u003eUnique 3 to 5 plies lamination superposing original silicone material and aramid fiber on 3 to 5 layers depending on the item and hose diameter, the strength exceeds by far any OEM units.\nThe 5 kg \/ cm2 normal maximum pressure resistance (in the case of inner diameter 25 mm) prevents hose expansion and \nburst.\u003cbr\u003ePrecise and carefully hand-made construction creates an extremely flat inner surface, completely eliminating stress on the fluid . In addition, \nall sections are covered by adopting suitable treatment for applications such as oil, fuel, heat resistance.\u003cbr\u003e\u003cbr\u003ePlease note that all Hoses from Samco are made to order: allow 6 to 8 weeks lead time. Colour are customisable on order, let us know during checkout in the notes. All Samco Hoses sold on our website are garantied original and follow their strict warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003c!--split--\u003e","published_at":"2019-04-26T16:16:05+08:00","created_at":"2019-04-26T16:16:06+08:00","vendor":"Samco Japan","type":"Cooling Hoses","tags":["2001","2002","2003","2004","2005","civic-type-r-ep3-2001-2005-na-k20a-i4","cooling","cooling-hoses","coolinghoses","honda","jp1","new","samco-japan","ws114"],"price":20382,"price_min":20382,"price_max":20382,"available":true,"price_varies":false,"compare_at_price":23700,"compare_at_price_min":23700,"compare_at_price_max":23700,"compare_at_price_varies":false,"variants":[{"id":19755610931297,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"40TCS203\/C","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Samco Japan - 2 Pcs Cooling Hoses Set Radiator - Honda - Civic Type R EP3","public_title":null,"options":["Default Title"],"price":20382,"weight":6000,"compare_at_price":23700,"inventory_quantity":46,"inventory_management":"shopify","inventory_policy":"deny","barcode":"40TCS203C","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_2_hoses_radiator_kit_75dcb950-b6d6-457b-9838-a4f78e0e8e04.jpg?v=1710179341"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_2_hoses_radiator_kit_75dcb950-b6d6-457b-9838-a4f78e0e8e04.jpg?v=1710179341","options":["Title"],"media":[{"alt":"Samco Japan - 2 Pcs Cooling Hoses Set Radiator - Honda - Civic Type R EP3 - 40TCS203\/C - RZCREWGARAGE","id":26388472561846,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_2_hoses_radiator_kit_75dcb950-b6d6-457b-9838-a4f78e0e8e04.jpg?v=1710179341"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_2_hoses_radiator_kit_75dcb950-b6d6-457b-9838-a4f78e0e8e04.jpg?v=1710179341","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Samco Japan\u003cbr\u003ePart Number: 40TCS203\/C\u003cbr\u003eHose Type: Cooling Hoses\u003cbr\u003eHose Numbers per set: 2\u003cbr\u003eHose Colour (Please leave us a note during checkout): Standard color:\tBlue \/ Red \/ Black \/ Green \/ Yellow \/ Orange\u003cbr\u003e\u003cbr\u003eSamco is the leader in the Cooling hose system for a reason. Their Unique 3 to 5 plies design ensure long lasting qualities to any type of usages: Boost, Cooling, Fueling. Their design is composed of:\u003cbr\u003eOuter surface coating to resist extreem deterioration to heat or cold.\u003cbr\u003eUnique 3 to 5 plies lamination superposing original silicone material and aramid fiber on 3 to 5 layers depending on the item and hose diameter, the strength exceeds by far any OEM units.\nThe 5 kg \/ cm2 normal maximum pressure resistance (in the case of inner diameter 25 mm) prevents hose expansion and \nburst.\u003cbr\u003ePrecise and carefully hand-made construction creates an extremely flat inner surface, completely eliminating stress on the fluid . In addition, \nall sections are covered by adopting suitable treatment for applications such as oil, fuel, heat resistance.\u003cbr\u003e\u003cbr\u003ePlease note that all Hoses from Samco are made to order: allow 6 to 8 weeks lead time. Colour are customisable on order, let us know during checkout in the notes. All Samco Hoses sold on our website are garantied original and follow their strict warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003c!--split--\u003e"}

{"id":380968501275,"title":"Sard Dual Core Radiator - Honda - Civic Type R EP3 (MT)","handle":"sard-dual-core-radiator-honda-civic-type-r-ep3-mt-35529","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Sard\u003cbr\u003ePart Number: 35529\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003eRadiator Cap included (unless the stock radiator design does not have the cap on the radiator itself)\u003cbr\u003e\u003cbr\u003eSard Racing company is an arm of Sard Japan manufacturing aluminum radiator at an affordable price.\u003cbr\u003e\nThis radiator is a Full aluminium unit to help in cooling down your engine in any occasion. With its full polished body and Sard embossed logo it ensures the perfect look and efficiency in your engine bay. These radiators fit the stock fan mounting points. Slim fans are available in the shop.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003c!--split--\u003e","published_at":"2017-11-28T23:34:49+08:00","created_at":"2017-11-28T23:34:50+08:00","vendor":"Sard","type":"Radiators","tags":["2001","2002","2003","2004","2005","civic-type-r-ep3-2001-2005-na-k20a-i4","cooling","honda","mt","radiators","sard","sg1","ws130"],"price":21070,"price_min":21070,"price_max":21070,"available":true,"price_varies":false,"compare_at_price":30100,"compare_at_price_min":30100,"compare_at_price_max":30100,"compare_at_price_varies":false,"variants":[{"id":4857891258395,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"35529","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Sard Dual Core Radiator - Honda - Civic Type R EP3 (MT)","public_title":null,"options":["Default Title"],"price":21070,"weight":19000,"compare_at_price":30100,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SARD_radiator_1_e57c7636-2a11-4858-9dea-5013bb82b10d.jpg?v=1710146005"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SARD_radiator_1_e57c7636-2a11-4858-9dea-5013bb82b10d.jpg?v=1710146005","options":["Title"],"media":[{"alt":"Sard Dual Core Radiator - Honda - Civic Type R EP3 (MT) - 35529 - RZCREWGARAGE","id":25435266154678,"position":1,"preview_image":{"aspect_ratio":1.509,"height":795,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SARD_radiator_1_e57c7636-2a11-4858-9dea-5013bb82b10d.jpg?v=1710146005"},"aspect_ratio":1.509,"height":795,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SARD_radiator_1_e57c7636-2a11-4858-9dea-5013bb82b10d.jpg?v=1710146005","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Sard\u003cbr\u003ePart Number: 35529\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003eRadiator Cap included (unless the stock radiator design does not have the cap on the radiator itself)\u003cbr\u003e\u003cbr\u003eSard Racing company is an arm of Sard Japan manufacturing aluminum radiator at an affordable price.\u003cbr\u003e\nThis radiator is a Full aluminium unit to help in cooling down your engine in any occasion. With its full polished body and Sard embossed logo it ensures the perfect look and efficiency in your engine bay. These radiators fit the stock fan mounting points. Slim fans are available in the shop.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003c!--split--\u003e"}

{"id":1425203429473,"title":"Seeker - Red Coat Stain Mesh Clutch Line - Honda - Civic Type R EP3","handle":"seeker-red-coat-stain-mesh-clutch-line-honda-ep3-17000-ep3-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Seeker\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cbr\u003eThe SEEKER stain mesh clutch line adopts a perfect structure such as covering a very strong Teflon tube with high temperature and high pressure mesh with stainless steel mesh and applying a red clear coat so it gets hot and almost expands even when high pressure is applied It demonstrates stable performance without. Please try direct clutch feeling which can not be obtained with genuine hose. \n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003c!--split--\u003e","published_at":"2018-09-03T14:50:55+08:00","created_at":"2018-09-03T14:50:56+08:00","vendor":"Seeker","type":"Clutch Hoses","tags":["2001","2002","2003","2004","2005","civic-type-r-ep3-2001-2005-na-k20a-i4","clutch-hoses","honda","jp1","seeker","ws110"],"price":10260,"price_min":10260,"price_max":10260,"available":true,"price_varies":false,"compare_at_price":11400,"compare_at_price_min":11400,"compare_at_price_max":11400,"compare_at_price_varies":false,"variants":[{"id":12419020849249,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"17000-EP3-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Seeker - Red Coat Stain Mesh Clutch Line - Honda - Civic Type R EP3","public_title":null,"options":["Default Title"],"price":10260,"weight":1500,"compare_at_price":11400,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Seeker_clutch_Line_c79e6d7a-0623-4632-a755-447cfdc5b240.jpg?v=1710167499"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Seeker_clutch_Line_c79e6d7a-0623-4632-a755-447cfdc5b240.jpg?v=1710167499","options":["Title"],"media":[{"alt":"Seeker - Red Coat Stain Mesh Clutch Line - Honda - EP3 - 17000-EP3-000 - RZCrewGarage","id":26320370434230,"position":1,"preview_image":{"aspect_ratio":1.212,"height":330,"width":400,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Seeker_clutch_Line_c79e6d7a-0623-4632-a755-447cfdc5b240.jpg?v=1710167499"},"aspect_ratio":1.212,"height":330,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Seeker_clutch_Line_c79e6d7a-0623-4632-a755-447cfdc5b240.jpg?v=1710167499","width":400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Seeker\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cbr\u003eThe SEEKER stain mesh clutch line adopts a perfect structure such as covering a very strong Teflon tube with high temperature and high pressure mesh with stainless steel mesh and applying a red clear coat so it gets hot and almost expands even when high pressure is applied It demonstrates stable performance without. Please try direct clutch feeling which can not be obtained with genuine hose. \n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003c!--split--\u003e"}

{"id":7209266413750,"title":"Seeker - Super Low Position Seat Rail - Honda - Civic Type R EP3","handle":"seeker-super-low-position-seat-rail-honda-civic-type-r-ep3","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Seeker\u003cbr\u003eReference Number: EP3SLPSR\u003cbr\u003e\u003cbr\u003eA low-position seat rail that supports full bucket seats with side closures.\u003cbr\u003e\nSince the front and rear and height can be adjusted, the seat position suitable for sports driving can be set. Double-sided lock type that does not rattle easily, designed exclusively for each model.\u003cbr\u003e\u003cbr\u003e\n\n\n\n* Competition-only product\u003cbr\u003e\n* When looking for our full bucket seat seat rail, please use the BRIDE seat rail that complies with the safety standards.\u003cbr\u003e\n* Depending on the model, the front lock method may be used.\u003cbr\u003e\n* Basically made to order. Estimated delivery time is about one month.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003c!--split--\u003e","published_at":"2021-12-28T23:04:52+08:00","created_at":"2021-12-28T20:04:04+08:00","vendor":"Seeker","type":"Seat Rails","tags":["2001","2002","2003","2004","2005","civic-type-r-ep3-2001-2005-na-k20a-i4","EP3","honda","jp1","seat-rails","seeker","ws17"],"price":26226,"price_min":26226,"price_max":26226,"available":true,"price_varies":false,"compare_at_price":28200,"compare_at_price_min":28200,"compare_at_price_max":28200,"compare_at_price_varies":false,"variants":[{"id":41032674640054,"title":"Right","option1":"Right","option2":null,"option3":null,"sku":"EP3SLPSR","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Seeker - Super Low Position Seat Rail - Honda - Civic Type R EP3 - Right","public_title":"Right","options":["Right"],"price":26226,"weight":14000,"compare_at_price":28200,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":41032674672822,"title":"Left","option1":"Left","option2":null,"option3":null,"sku":"EP3SLPSL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Seeker - Super Low Position Seat Rail - Honda - Civic Type R EP3 - Left","public_title":"Left","options":["Left"],"price":26226,"weight":14000,"compare_at_price":28200,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":[],"featured_image":null,"options":["Side"],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Seeker\u003cbr\u003eReference Number: EP3SLPSR\u003cbr\u003e\u003cbr\u003eA low-position seat rail that supports full bucket seats with side closures.\u003cbr\u003e\nSince the front and rear and height can be adjusted, the seat position suitable for sports driving can be set. Double-sided lock type that does not rattle easily, designed exclusively for each model.\u003cbr\u003e\u003cbr\u003e\n\n\n\n* Competition-only product\u003cbr\u003e\n* When looking for our full bucket seat seat rail, please use the BRIDE seat rail that complies with the safety standards.\u003cbr\u003e\n* Depending on the model, the front lock method may be used.\u003cbr\u003e\n* Basically made to order. Estimated delivery time is about one month.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003c!--split--\u003e"}

{"id":401629806619,"title":"Seeker Red Coat Brake Lines - Honda - Civic Type R EP3","handle":"seeker-red-coat-brake-lines-honda-ep3-seek-dc5-lin-02","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Seeker\u003cbr\u003ePosition: Front and Rear\u003cbr\u003eMaterial: Stainless Steel\u003cbr\u003eMain Colour: \u003cbr\u003ePieces included: \u003cbr\u003e\u003cbr\u003eThe SEEKER stain mesh brake line adopts a perfect structure adopting a very strong Teflon tube with a mesh of stainless steel and applying a red clear coat finish. It ensures perfect braking touch in any situation.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003c!--split--\u003e","published_at":"2017-12-04T11:20:44+08:00","created_at":"2017-12-04T11:20:45+08:00","vendor":"Seeker","type":"Brake Lines and Fittings","tags":["2001","2002","2003","2004","2005","brake-lines-and-fittings","civic-type-r-ep3-2001-2005-na-k20a-i4","front","honda","jp1","lines-and-fittings","rear","seeker","ws13"],"price":34435,"price_min":34435,"price_max":34435,"available":true,"price_varies":false,"compare_at_price":35500,"compare_at_price_min":35500,"compare_at_price_max":35500,"compare_at_price_varies":false,"variants":[{"id":5004911280155,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SEEK-DC5-LIN-02","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Seeker Red Coat Brake Lines - Honda - Civic Type R EP3","public_title":null,"options":["Default Title"],"price":34435,"weight":1500,"compare_at_price":35500,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SEEK-DC5-LIN-02_7cae5c82-8c1a-498c-9f07-8ca6ebe4f072.jpg?v=1686880158"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SEEK-DC5-LIN-02_7cae5c82-8c1a-498c-9f07-8ca6ebe4f072.jpg?v=1686880158","options":["Title"],"media":[{"alt":"Seeker Red Coat Brake Lines - Honda - EP3 - SEEK-DC5-LIN-02 - Rzcrewgarage","id":26320406610102,"position":1,"preview_image":{"aspect_ratio":1.212,"height":330,"width":400,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SEEK-DC5-LIN-02_7cae5c82-8c1a-498c-9f07-8ca6ebe4f072.jpg?v=1686880158"},"aspect_ratio":1.212,"height":330,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SEEK-DC5-LIN-02_7cae5c82-8c1a-498c-9f07-8ca6ebe4f072.jpg?v=1686880158","width":400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Seeker\u003cbr\u003ePosition: Front and Rear\u003cbr\u003eMaterial: Stainless Steel\u003cbr\u003eMain Colour: \u003cbr\u003ePieces included: \u003cbr\u003e\u003cbr\u003eThe SEEKER stain mesh brake line adopts a perfect structure adopting a very strong Teflon tube with a mesh of stainless steel and applying a red clear coat finish. It ensures perfect braking touch in any situation.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003c!--split--\u003e"}

{"id":401654415387,"title":"Seido Ya RM551 Front Brake Pads - Honda - Civic Type R EP3","handle":"seido-ya-rm551-front-brake-pads-honda-ep3-sdy553-rm5","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Seido Ya\u003cbr\u003ePosition: Front\u003cbr\u003ePurpose: Street\u003cbr\u003e\u003cbr\u003eWhile adopting carbon semi-metal, semi-meter features improves poor controllability at high temperature, excellent controllability from mid range to high temperature range and provides stable stopping power. Operating temp 0 to 800c.\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003c!--split--\u003e","published_at":"2017-12-04T11:27:54+08:00","created_at":"2017-12-04T11:27:55+08:00","vendor":"Seido Ya","type":"Brake Pads","tags":["2001","2002","2003","2004","2005","brake-pads","civic-type-r-ep3-2001-2005-na-k20a-i4","front","honda","jp1","seido-ya","street","ws114"],"price":22790,"price_min":22790,"price_max":22790,"available":true,"price_varies":false,"compare_at_price":26500,"compare_at_price_min":26500,"compare_at_price_max":26500,"compare_at_price_varies":false,"variants":[{"id":5005024460827,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SDY553-RM5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Seido Ya RM551 Front Brake Pads - Honda - Civic Type R EP3","public_title":null,"options":["Default Title"],"price":22790,"weight":1300,"compare_at_price":26500,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SDY553-RM5_8f14ed92-c9af-42da-9f61-2b4fbb2ebfc3.jpg?v=1710146476"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SDY553-RM5_8f14ed92-c9af-42da-9f61-2b4fbb2ebfc3.jpg?v=1710146476","options":["Title"],"media":[{"alt":"Seido Ya RM551 Front Brake Pads - Honda - EP3 - SDY553-RM5 - Rzcrewgarage","id":25418761994422,"position":1,"preview_image":{"aspect_ratio":1.506,"height":166,"width":250,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SDY553-RM5_8f14ed92-c9af-42da-9f61-2b4fbb2ebfc3.jpg?v=1710146476"},"aspect_ratio":1.506,"height":166,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SDY553-RM5_8f14ed92-c9af-42da-9f61-2b4fbb2ebfc3.jpg?v=1710146476","width":250}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Seido Ya\u003cbr\u003ePosition: Front\u003cbr\u003ePurpose: Street\u003cbr\u003e\u003cbr\u003eWhile adopting carbon semi-metal, semi-meter features improves poor controllability at high temperature, excellent controllability from mid range to high temperature range and provides stable stopping power. Operating temp 0 to 800c.\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003c!--split--\u003e"}

{"id":401653694491,"title":"Seido Ya RM551 Rear Brake Pads - Honda - Civic Type R EP3","handle":"seido-ya-rm551-rear-brake-pads-honda-ep3-sdy512-rm5","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Seido Ya\u003cbr\u003ePosition: Rear\u003cbr\u003ePurpose: Street\u003cbr\u003e\u003cbr\u003eIt is a model that can be widely used from low temperature to high temperature by lowering the lock ratio than middle high temperature, giving initial braking from low temperature and emphasizing controllability and finished in type that braking power rises according to applied force on the pedal. Operating Range: 0 to 800C\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003c!--split--\u003e","published_at":"2017-12-04T11:27:43+08:00","created_at":"2017-12-04T11:27:43+08:00","vendor":"Seido Ya","type":"Brake Pads","tags":["2001","2002","2003","2004","2005","brake-pads","civic-type-r-ep3-2001-2005-na-k20a-i4","honda","jp1","rear","seido-ya","street","ws114"],"price":22790,"price_min":22790,"price_max":22790,"available":true,"price_varies":false,"compare_at_price":26500,"compare_at_price_min":26500,"compare_at_price_max":26500,"compare_at_price_varies":false,"variants":[{"id":5005023150107,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SDY512-RM5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Seido Ya RM551 Rear Brake Pads - Honda - Civic Type R EP3","public_title":null,"options":["Default Title"],"price":22790,"weight":1300,"compare_at_price":26500,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SDY512-RM5_d23d7ef5-5de3-41fc-9f44-7e659a3fc29e.jpg?v=1710146464"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SDY512-RM5_d23d7ef5-5de3-41fc-9f44-7e659a3fc29e.jpg?v=1710146464","options":["Title"],"media":[{"alt":"Seido Ya RM551 Rear Brake Pads - Honda - EP3 - SDY512-RM5 - Rzcrewgarage","id":25418757406902,"position":1,"preview_image":{"aspect_ratio":1.506,"height":166,"width":250,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SDY512-RM5_d23d7ef5-5de3-41fc-9f44-7e659a3fc29e.jpg?v=1710146464"},"aspect_ratio":1.506,"height":166,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SDY512-RM5_d23d7ef5-5de3-41fc-9f44-7e659a3fc29e.jpg?v=1710146464","width":250}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Seido Ya\u003cbr\u003ePosition: Rear\u003cbr\u003ePurpose: Street\u003cbr\u003e\u003cbr\u003eIt is a model that can be widely used from low temperature to high temperature by lowering the lock ratio than middle high temperature, giving initial braking from low temperature and emphasizing controllability and finished in type that braking power rises according to applied force on the pedal. Operating Range: 0 to 800C\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003c!--split--\u003e"}

{"id":401655496731,"title":"Seido Ya RM551+ Front Brake Pads - Honda - Civic Type R EP3","handle":"seido-ya-rm551-front-brake-pads-honda-ep3-sdy553-rm55","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Seido Ya\u003cbr\u003ePosition: Front\u003cbr\u003ePurpose: Street\u003cbr\u003e\u003cbr\u003eWhile adopting carbon semi-metal, semi-meter features improves poor controllability at high temperature, excellent controllability from mid range to high temperature range and provides stable stopping power. Operating temp 0 to 800c.\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003c!--split--\u003e","published_at":"2017-12-04T11:28:14+08:00","created_at":"2017-12-04T11:28:15+08:00","vendor":"Seido Ya","type":"Brake Pads","tags":["2001","2002","2003","2004","2005","brake-pads","civic-type-r-ep3-2001-2005-na-k20a-i4","front","honda","jp1","seido-ya","street","ws117"],"price":30511,"price_min":30511,"price_max":30511,"available":true,"price_varies":false,"compare_at_price":36760,"compare_at_price_min":36760,"compare_at_price_max":36760,"compare_at_price_varies":false,"variants":[{"id":5005031211035,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SDY553-RM55","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Seido Ya RM551+ Front Brake Pads - Honda - Civic Type R EP3","public_title":null,"options":["Default Title"],"price":30511,"weight":1300,"compare_at_price":36760,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SDY553-RM55_b61c0b16-f47e-4e1e-a264-d326e39f3e42.jpg?v=1710146492"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SDY553-RM55_b61c0b16-f47e-4e1e-a264-d326e39f3e42.jpg?v=1710146492","options":["Title"],"media":[{"alt":"Seido Ya RM551+ Front Brake Pads - Honda - EP3 - SDY553-RM55 - Rzcrewgarage","id":24039708033206,"position":1,"preview_image":{"aspect_ratio":1.333,"height":450,"width":600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SDY553-RM55_b61c0b16-f47e-4e1e-a264-d326e39f3e42.jpg?v=1710146492"},"aspect_ratio":1.333,"height":450,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SDY553-RM55_b61c0b16-f47e-4e1e-a264-d326e39f3e42.jpg?v=1710146492","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Seido Ya\u003cbr\u003ePosition: Front\u003cbr\u003ePurpose: Street\u003cbr\u003e\u003cbr\u003eWhile adopting carbon semi-metal, semi-meter features improves poor controllability at high temperature, excellent controllability from mid range to high temperature range and provides stable stopping power. Operating temp 0 to 800c.\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003c!--split--\u003e"}

{"id":401654743067,"title":"Seido Ya RM551+ Rear Brake Pads - Honda - Civic Type R EP3","handle":"seido-ya-rm551-rear-brake-pads-honda-ep3-sdy512-rm55","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Seido Ya\u003cbr\u003ePosition: Rear\u003cbr\u003ePurpose: Street\u003cbr\u003e\u003cbr\u003eWhile adopting carbon semi-metal, semi-meter features improves poor controllability at high temperature, excellent controllability from mid range to high temperature range and provides stable stopping power. Operating temp 0 to 800c.\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003c!--split--\u003e","published_at":"2017-12-04T11:28:01+08:00","created_at":"2017-12-04T11:28:01+08:00","vendor":"Seido Ya","type":"Brake Pads","tags":["2001","2002","2003","2004","2005","brake-pads","civic-type-r-ep3-2001-2005-na-k20a-i4","honda","jp1","rear","seido-ya","street","ws114"],"price":22790,"price_min":22790,"price_max":22790,"available":true,"price_varies":false,"compare_at_price":26500,"compare_at_price_min":26500,"compare_at_price_max":26500,"compare_at_price_varies":false,"variants":[{"id":5005026033691,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SDY512-RM55","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Seido Ya RM551+ Rear Brake Pads - Honda - Civic Type R EP3","public_title":null,"options":["Default Title"],"price":22790,"weight":1300,"compare_at_price":26500,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SDY512-RM55_94274a64-9913-443f-8202-abf8d3cdff90.jpg?v=1710146481"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SDY512-RM55_94274a64-9913-443f-8202-abf8d3cdff90.jpg?v=1710146481","options":["Title"],"media":[{"alt":"Seido Ya RM551+ Rear Brake Pads - Honda - EP3 - SDY512-RM55 - Rzcrewgarage","id":25418765271222,"position":1,"preview_image":{"aspect_ratio":1.333,"height":450,"width":600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SDY512-RM55_94274a64-9913-443f-8202-abf8d3cdff90.jpg?v=1710146481"},"aspect_ratio":1.333,"height":450,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SDY512-RM55_94274a64-9913-443f-8202-abf8d3cdff90.jpg?v=1710146481","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Seido Ya\u003cbr\u003ePosition: Rear\u003cbr\u003ePurpose: Street\u003cbr\u003e\u003cbr\u003eWhile adopting carbon semi-metal, semi-meter features improves poor controllability at high temperature, excellent controllability from mid range to high temperature range and provides stable stopping power. Operating temp 0 to 800c.\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003c!--split--\u003e"}

{"id":401656545307,"title":"Seido Ya SM400 Front Brake Pads - Honda - Civic Type R EP3","handle":"seido-ya-sm400-front-brake-pads-honda-ep3-sdy553-sm4","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Seido Ya\u003cbr\u003ePosition: Front\u003cbr\u003ePurpose: Street\u003cbr\u003e\u003cbr\u003ePerfect street pad that gives you a strong bite from 50-600c.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003c!--split--\u003e","published_at":"2017-12-04T11:28:31+08:00","created_at":"2017-12-04T11:28:32+08:00","vendor":"Seido Ya","type":"Brake Pads","tags":["2001","2002","2003","2004","2005","brake-pads","civic-type-r-ep3-2001-2005-na-k20a-i4","front","honda","jp1","seido-ya","street","ws113"],"price":17052,"price_min":17052,"price_max":17052,"available":true,"price_varies":false,"compare_at_price":19600,"compare_at_price_min":19600,"compare_at_price_max":19600,"compare_at_price_varies":false,"variants":[{"id":5005033963547,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SDY553-SM4","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Seido Ya SM400 Front Brake Pads - Honda - Civic Type R EP3","public_title":null,"options":["Default Title"],"price":17052,"weight":1300,"compare_at_price":19600,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SDY553-SM4_def47c24-3bb1-49b2-af58-fc0e683b8720.jpg?v=1710146508"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SDY553-SM4_def47c24-3bb1-49b2-af58-fc0e683b8720.jpg?v=1710146508","options":["Title"],"media":[{"alt":"Seido Ya SM400 Front Brake Pads - Honda - EP3 - SDY553-SM4 - Rzcrewgarage","id":25418770514102,"position":1,"preview_image":{"aspect_ratio":1.323,"height":189,"width":250,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SDY553-SM4_def47c24-3bb1-49b2-af58-fc0e683b8720.jpg?v=1710146508"},"aspect_ratio":1.323,"height":189,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SDY553-SM4_def47c24-3bb1-49b2-af58-fc0e683b8720.jpg?v=1710146508","width":250}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Seido Ya\u003cbr\u003ePosition: Front\u003cbr\u003ePurpose: Street\u003cbr\u003e\u003cbr\u003ePerfect street pad that gives you a strong bite from 50-600c.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003c!--split--\u003e"}