Cooling

{"id":2095443935329,"title":"HPI - 40mm Radiator Evolve Type SH - Nissan - Fairlady Z Z33('07) (MT)","handle":"hpi-40mm-radiator-evolve-type-sh-nissan-fairlady-z-z3307-mt-hpare-z33bsh","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HPI\u003cbr\u003ePart Number: HPARE-Z33BSH\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003eThe HPI Evolve line of radiators are fully made in aluminum in Japan. Targetting better flow and high efficiency cooling for the street to the track. By expanding its water capacity and heat exchange area, this radiator helps in keeping your temperature down in any condition avoiding dramatic engine failure. The Evolve line is diversified in 3 categories:\u003cbr\u003eSTD: For hardcore motorsport and competition usage!\u003cbr\u003eSH: Lighter an thinner than the STD for street use.\u003cbr\u003e MF: Standing for Multi flow, the radiator core involves a complex multi turn inner cooling passage for more stable temperature on the long run. It will fits endurance racing! \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eFairlady Z | Z33 Kouki | 2007-2008 | NA | VQ35HR | V6\u003cbr\u003e\u003cbr\u003eNote: MT Only!\u003c!--split--\u003eMT Only!","published_at":"2019-04-26T16:15:03+08:00","created_at":"2019-04-26T16:15:04+08:00","vendor":"HPI","type":"Radiators","tags":["2007","2008","cooling","fairlady-z-z33-kouki-2007-2008-na-vq35hr-v6","hpi","jp1","mt","nissan","radiators","ws112"],"price":52300,"price_min":52300,"price_max":52300,"available":true,"price_varies":false,"compare_at_price":54900,"compare_at_price_min":54900,"compare_at_price_max":54900,"compare_at_price_varies":false,"variants":[{"id":19755596972129,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"HPARE-Z33BSH","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HPI - 40mm Radiator Evolve Type SH - Nissan - Fairlady Z Z33('07) (MT)","public_title":null,"options":["Default Title"],"price":52300,"weight":17000,"compare_at_price":54900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/HPI-Radiator_92ca2d28-1fdc-4ea2-81ac-d62f2ac0ea1b.jpg?v=1710179312"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/HPI-Radiator_92ca2d28-1fdc-4ea2-81ac-d62f2ac0ea1b.jpg?v=1710179312","options":["Title"],"media":[{"alt":"HPI - 40mm Radiator Evolve Type SH - Nissan - Fairlady Z Z33('07) (MT) - HPARE-Z33BSH - RZCREWGARAGE","id":26388471021750,"position":1,"preview_image":{"aspect_ratio":2.273,"height":440,"width":1000,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/HPI-Radiator_92ca2d28-1fdc-4ea2-81ac-d62f2ac0ea1b.jpg?v=1710179312"},"aspect_ratio":2.273,"height":440,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/HPI-Radiator_92ca2d28-1fdc-4ea2-81ac-d62f2ac0ea1b.jpg?v=1710179312","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HPI\u003cbr\u003ePart Number: HPARE-Z33BSH\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003eThe HPI Evolve line of radiators are fully made in aluminum in Japan. Targetting better flow and high efficiency cooling for the street to the track. By expanding its water capacity and heat exchange area, this radiator helps in keeping your temperature down in any condition avoiding dramatic engine failure. The Evolve line is diversified in 3 categories:\u003cbr\u003eSTD: For hardcore motorsport and competition usage!\u003cbr\u003eSH: Lighter an thinner than the STD for street use.\u003cbr\u003e MF: Standing for Multi flow, the radiator core involves a complex multi turn inner cooling passage for more stable temperature on the long run. It will fits endurance racing! \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eFairlady Z | Z33 Kouki | 2007-2008 | NA | VQ35HR | V6\u003cbr\u003e\u003cbr\u003eNote: MT Only!\u003c!--split--\u003eMT Only!"}

{"id":380972793883,"title":"Koyorad HYPER V SERIES 36mm Radiator - Honda - S2000 AP1\/AP2 (MT)","handle":"koyorad-hyper-v-series-36mm-radiator-honda-s2000-ap1-ap2-mt-vh081226","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Koyorad\u003cbr\u003ePart Number: VH081226\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003eNocolok Brazing is used in all Koyorad Racing Radiators.  This ensures maximum durability, strength  and anticorrosion protection.  Nocolok Brazing uses anticorrosive flux, encouraging even flow of over fins and tubes forming a strong bond in our furnace.  With over 50 years of experience in manufacturing OE replacement radiators certifies our consistent high quality and durability. Radiator cap is not included\u003cbr\u003e\u003cbr\u003eThe Hyper V-Core Series is the newest to the Koyorad | Koyo All Aluminum Racing Radiator line up. An engine's cooling system in many newer vehicles are suffering due to limited space and crowding which affects air circulation. Our new ultra efficient Hyper V core was developed specifically for vehicles which see extreme heat, are limited in space, and where the factory inlet\/outlet locations eliminate the option for a proper N-FLO design. The Hyper V Series radiators have a specially designed fin and tube pitch which significantly increases its surface area while still allowing for excellent air circulation through the radiator. The Hyper V-Core series is the perfect solution where space savings and high performance is a must. Unless noted otherwise, all Koyorad Hyper V-Series All Aluminum Radiators are Nocolok brazed, designed as a factory fit, direct bolt in with no engine modifications necessary, and retain mounts for the stock fan shrouds and fans. See notes in individual item descriptions for details.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eS2000 | AP1 | 1999-2003 | NA | F20C | I4\u003cbr\u003eS2000 | AP2 | 2003-2009 | NA | F22C | I4\u003c!--split--\u003e","published_at":"2017-11-28T23:36:18+08:00","created_at":"2017-11-28T23:36:18+08:00","vendor":"Koyorad","type":"Radiators","tags":["1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","cooling","honda","koyorad","mt","radiators","s2000-ap1-1999-2003-na-f20c-i4","s2000-ap2-2003-2009-na-f22c-i4","us1","ws124"],"price":53220,"price_min":53220,"price_max":53220,"available":true,"price_varies":false,"compare_at_price":64500,"compare_at_price_min":64500,"compare_at_price_max":64500,"compare_at_price_varies":false,"variants":[{"id":4857908232219,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"VH081226","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Koyorad HYPER V SERIES 36mm Radiator - Honda - S2000 AP1\/AP2 (MT)","public_title":null,"options":["Default Title"],"price":53220,"weight":9670,"compare_at_price":64500,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Koyorad_7d12e7a2-6d63-4986-adfc-6a5e0f623be6.jpg?v=1710146107"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Koyorad_7d12e7a2-6d63-4986-adfc-6a5e0f623be6.jpg?v=1710146107","options":["Title"],"media":[{"alt":"Koyorad HYPER V SERIES 36mm Radiator - Honda - S2000 AP1\/AP2 (MT) - VH081226 - RZCrewGarage","id":25353078243510,"position":1,"preview_image":{"aspect_ratio":1.509,"height":795,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Koyorad_7d12e7a2-6d63-4986-adfc-6a5e0f623be6.jpg?v=1710146107"},"aspect_ratio":1.509,"height":795,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Koyorad_7d12e7a2-6d63-4986-adfc-6a5e0f623be6.jpg?v=1710146107","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Koyorad\u003cbr\u003ePart Number: VH081226\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003eNocolok Brazing is used in all Koyorad Racing Radiators.  This ensures maximum durability, strength  and anticorrosion protection.  Nocolok Brazing uses anticorrosive flux, encouraging even flow of over fins and tubes forming a strong bond in our furnace.  With over 50 years of experience in manufacturing OE replacement radiators certifies our consistent high quality and durability. Radiator cap is not included\u003cbr\u003e\u003cbr\u003eThe Hyper V-Core Series is the newest to the Koyorad | Koyo All Aluminum Racing Radiator line up. An engine's cooling system in many newer vehicles are suffering due to limited space and crowding which affects air circulation. Our new ultra efficient Hyper V core was developed specifically for vehicles which see extreme heat, are limited in space, and where the factory inlet\/outlet locations eliminate the option for a proper N-FLO design. The Hyper V Series radiators have a specially designed fin and tube pitch which significantly increases its surface area while still allowing for excellent air circulation through the radiator. The Hyper V-Core series is the perfect solution where space savings and high performance is a must. Unless noted otherwise, all Koyorad Hyper V-Series All Aluminum Radiators are Nocolok brazed, designed as a factory fit, direct bolt in with no engine modifications necessary, and retain mounts for the stock fan shrouds and fans. See notes in individual item descriptions for details.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eS2000 | AP1 | 1999-2003 | NA | F20C | I4\u003cbr\u003eS2000 | AP2 | 2003-2009 | NA | F22C | I4\u003c!--split--\u003e"}

{"id":6097367924918,"title":"Mishimoto - Performance Aluminium Radiator - Subaru - Impreza WRX STi GRB\/GVB (MT)","handle":"mishimoto-performance-aluminium-radiator-subaru-impreza-wrx-sti-grb-gvb-mt-mmrad-sti-08","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMRAD-STI-08\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003eDirect fit for the 2008-2014 WRX and 2008-2019 STI\u003cbr\u003e\nFull aluminum construction including durable, TIG-welded end tanks\u003cbr\u003e\nTwo-row, 1.65\" thick brazed aluminum core\u003cbr\u003e\nIncreased fluid capacity and optimal heat dissipation\u003cbr\u003e\nProvides efficient temperature reduction for use on the street, track, rallycross, or autocross course\u003cbr\u003e\nIncludes 1.3 Bar High-Pressure Radiator Cap , which effectively raises the boiling point of engine coolant and provides a safer, more efficient system\u003cbr\u003e\nIncludes Magnetic Drain Plug to capture any metallic debris\/fragments in your cooling system\u003cbr\u003e\nMishimoto Lifetime Warranty\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eImpreza WRX STi | GRB APPLIED A | 2007-2009 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GRB APPLIED B | 2009-2009 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GRB APPLIED C | 2010-2012 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GRB APPLIED D | 2012-2013 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GRB APPLIED E | 2013-2014 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GVB APPLIED C | 2007-2012 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GVB APPLIED D | 2012-2013 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GVB APPLIED E | 2013-2014 | TC | EJ207 | H4\u003cbr\u003e\u003cbr\u003eNote: MT Only!\u003c!--split--\u003eMT Only!","published_at":"2020-11-22T14:41:45+08:00","created_at":"2020-11-22T14:41:47+08:00","vendor":"Mishimoto","type":"Radiators","tags":["2007","2008","2009","2010","2011","2012","2013","2014","cooling","impreza-wrx-sti-grb-applied-a-2007-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-b-2009-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-c-2010-2012-tc-ej207-h4","impreza-wrx-sti-grb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-grb-applied-e-2013-2014-tc-ej207-h4","impreza-wrx-sti-gvb-applied-c-2007-2012-tc-ej207-h4","impreza-wrx-sti-gvb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-gvb-applied-e-2013-2014-tc-ej207-h4","mishimoto","mt","radiators","subaru","us1","ws125"],"price":53400,"price_min":53400,"price_max":53400,"available":true,"price_varies":false,"compare_at_price":65600,"compare_at_price_min":65600,"compare_at_price_max":65600,"compare_at_price_varies":false,"variants":[{"id":37591131193526,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMRAD-STI-08","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Performance Aluminium Radiator - Subaru - Impreza WRX STi GRB\/GVB (MT)","public_title":null,"options":["Default Title"],"price":53400,"weight":10441,"compare_at_price":65600,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMRAD-STI-08_d54b0f5a-dda5-459a-b038-700deb316063.jpg?v=1710194633"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMRAD-STI-08_d54b0f5a-dda5-459a-b038-700deb316063.jpg?v=1710194633","options":["Title"],"media":[{"alt":"Mishimoto - Performance Aluminium Radiator - Subaru - Impreza WRX STi GRB\/GVB (MT) - MMRAD-STI-08 - RZCREWGARAGE","id":25382060622006,"position":1,"preview_image":{"aspect_ratio":1.0,"height":700,"width":700,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMRAD-STI-08_d54b0f5a-dda5-459a-b038-700deb316063.jpg?v=1710194633"},"aspect_ratio":1.0,"height":700,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMRAD-STI-08_d54b0f5a-dda5-459a-b038-700deb316063.jpg?v=1710194633","width":700}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMRAD-STI-08\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003eDirect fit for the 2008-2014 WRX and 2008-2019 STI\u003cbr\u003e\nFull aluminum construction including durable, TIG-welded end tanks\u003cbr\u003e\nTwo-row, 1.65\" thick brazed aluminum core\u003cbr\u003e\nIncreased fluid capacity and optimal heat dissipation\u003cbr\u003e\nProvides efficient temperature reduction for use on the street, track, rallycross, or autocross course\u003cbr\u003e\nIncludes 1.3 Bar High-Pressure Radiator Cap , which effectively raises the boiling point of engine coolant and provides a safer, more efficient system\u003cbr\u003e\nIncludes Magnetic Drain Plug to capture any metallic debris\/fragments in your cooling system\u003cbr\u003e\nMishimoto Lifetime Warranty\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eImpreza WRX STi | GRB APPLIED A | 2007-2009 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GRB APPLIED B | 2009-2009 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GRB APPLIED C | 2010-2012 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GRB APPLIED D | 2012-2013 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GRB APPLIED E | 2013-2014 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GVB APPLIED C | 2007-2012 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GVB APPLIED D | 2012-2013 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GVB APPLIED E | 2013-2014 | TC | EJ207 | H4\u003cbr\u003e\u003cbr\u003eNote: MT Only!\u003c!--split--\u003eMT Only!"}

{"id":380974202907,"title":"Koyorad V Series 36Mm Radiator - Nissan - Fairlady Z Z33(VQ35HR) (MT)","handle":"koyorad-v-series-36mm-radiator-nissan-fairlady-z-z33vq35hr-mt-v2999","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Koyorad\u003cbr\u003ePart Number: V2999\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003eNocolok Brazing is used in all Koyorad Racing Radiators.  This ensures maximum durability, strength  and anticorrosion protection.  Nocolok Brazing uses anticorrosive flux, encouraging even flow of over fins and tubes forming a strong bond in our furnace.  With over 50 years of experience in manufacturing OE replacement radiators certifies our consistent high quality and durability. Radiator cap is not included\u003cbr\u003e\u003cbr\u003eDesigned for applications where engine configuration\/size cause clearances issues for thicker core radiators. In this case, the 36mm V-Core Series will suit your needs. Intended for both circuit and daily use. Unless noted otherwise, all Koyorad V-Series All Aluminum Radiators are Nocolok brazed, designed as a factory fit, direct bolt in with no engine modifications necessary, and retain mounts for the stock fan shrouds and fans. See notes in individual item descriptions for details.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eFairlady Z | Z33 Kouki | 2007-2008 | NA | VQ35HR | V6\u003c!--split--\u003e","published_at":"2017-11-28T23:36:41+08:00","created_at":"2017-11-28T23:36:41+08:00","vendor":"Koyorad","type":"Radiators","tags":["2007","2008","cooling","fairlady-z-z33-kouki-2007-2008-na-vq35hr-v6","koyorad","mt","nissan","radiators","us1","ws124"],"price":54790,"price_min":54790,"price_max":54790,"available":true,"price_varies":false,"compare_at_price":66400,"compare_at_price_min":66400,"compare_at_price_max":66400,"compare_at_price_varies":false,"variants":[{"id":4857911476251,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"V2999","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Koyorad V Series 36Mm Radiator - Nissan - Fairlady Z Z33(VQ35HR) (MT)","public_title":null,"options":["Default Title"],"price":54790,"weight":10260,"compare_at_price":66400,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Koyorad_86307311-022f-4aae-9b52-7e3eabd5f357.jpg?v=1710146134"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Koyorad_86307311-022f-4aae-9b52-7e3eabd5f357.jpg?v=1710146134","options":["Title"],"media":[{"alt":"Koyorad V Series 36Mm Radiator - Nissan - Fairlady Z Z33(VQ35HR) (MT) - V2999 - RZCrewGarage","id":25353084272822,"position":1,"preview_image":{"aspect_ratio":1.509,"height":795,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Koyorad_86307311-022f-4aae-9b52-7e3eabd5f357.jpg?v=1710146134"},"aspect_ratio":1.509,"height":795,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Koyorad_86307311-022f-4aae-9b52-7e3eabd5f357.jpg?v=1710146134","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Koyorad\u003cbr\u003ePart Number: V2999\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003eNocolok Brazing is used in all Koyorad Racing Radiators.  This ensures maximum durability, strength  and anticorrosion protection.  Nocolok Brazing uses anticorrosive flux, encouraging even flow of over fins and tubes forming a strong bond in our furnace.  With over 50 years of experience in manufacturing OE replacement radiators certifies our consistent high quality and durability. Radiator cap is not included\u003cbr\u003e\u003cbr\u003eDesigned for applications where engine configuration\/size cause clearances issues for thicker core radiators. In this case, the 36mm V-Core Series will suit your needs. Intended for both circuit and daily use. Unless noted otherwise, all Koyorad V-Series All Aluminum Radiators are Nocolok brazed, designed as a factory fit, direct bolt in with no engine modifications necessary, and retain mounts for the stock fan shrouds and fans. See notes in individual item descriptions for details.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eFairlady Z | Z33 Kouki | 2007-2008 | NA | VQ35HR | V6\u003c!--split--\u003e"}

{"id":3922318688353,"title":"Koyorad KH Type Radiator - Honda - Accord CL7\/CL9 (MT)","handle":"koyorad-kh-type-radiator-honda-accord-cl7-cl9-mt-kh081666","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Koyorad\u003cbr\u003ePart Number: KH081666\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote: For CL7, the radiator bracket and fan shrouds need modification to fit.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eNocolok Brazing is used in all Koyorad Racing Radiators.  This ensures maximum durability, strength  and anticorrosion protection.  Nocolok Brazing uses anticorrosive flux, encouraging even flow of over fins and tubes forming a strong bond in our furnace.  With over 50 years of experience in manufacturing OE replacement radiators certifies our consistent high quality and durability. Radiator cap is not included\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eAccord Euro R | CL7 | 2002-2008 | NA | K20A | I4\u003cbr\u003eAccord | CL9 | 2002-2008 | NA | K24A3 | I4\u003c!--split--\u003e","published_at":"2019-07-04T10:54:13+08:00","created_at":"2019-07-04T10:54:14+08:00","vendor":"Koyorad","type":"Radiators","tags":["2002","2003","2004","2005","2006","2007","2008","accord-cl9-2002-2008-na-k24a3-i4","accord-euro-r-cl7-2002-2008-na-k20a-i4","cooling","honda","koyorad","mt","radiators","us1","ws125"],"price":55320,"price_min":55320,"price_max":55320,"available":true,"price_varies":false,"compare_at_price":67100,"compare_at_price_min":67100,"compare_at_price_max":67100,"compare_at_price_varies":false,"variants":[{"id":29364183040097,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"KH081666","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Koyorad KH Type Radiator - Honda - Accord CL7\/CL9 (MT)","public_title":null,"options":["Default Title"],"price":55320,"weight":9670,"compare_at_price":67100,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Koyorad_57668696-1fe2-4c63-b34b-b5fe2f2bee2d.jpg?v=1710182669"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Koyorad_57668696-1fe2-4c63-b34b-b5fe2f2bee2d.jpg?v=1710182669","options":["Title"],"media":[{"alt":"Koyorad KH Type Radiator - Honda - Accord CL7\/CL9 (MT) - KH081666 - RZCrewGarage","id":25353075261622,"position":1,"preview_image":{"aspect_ratio":1.509,"height":795,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Koyorad_57668696-1fe2-4c63-b34b-b5fe2f2bee2d.jpg?v=1710182669"},"aspect_ratio":1.509,"height":795,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Koyorad_57668696-1fe2-4c63-b34b-b5fe2f2bee2d.jpg?v=1710182669","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Koyorad\u003cbr\u003ePart Number: KH081666\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote: For CL7, the radiator bracket and fan shrouds need modification to fit.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eNocolok Brazing is used in all Koyorad Racing Radiators.  This ensures maximum durability, strength  and anticorrosion protection.  Nocolok Brazing uses anticorrosive flux, encouraging even flow of over fins and tubes forming a strong bond in our furnace.  With over 50 years of experience in manufacturing OE replacement radiators certifies our consistent high quality and durability. Radiator cap is not included\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eAccord Euro R | CL7 | 2002-2008 | NA | K20A | I4\u003cbr\u003eAccord | CL9 | 2002-2008 | NA | K24A3 | I4\u003c!--split--\u003e"}

{"id":3856305389665,"title":"Koyorad HYPER V SERIES 36mm Radiator - Subaru - Impreza WRX STi GRB (A to E) (MT)","handle":"koyorad-hyper-v-series-36mm-radiator-subaru-impreza-wrx-sti-grb-a-to-e-mt-vh091662","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Koyorad\u003cbr\u003ePart Number: VH091662\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003eNocolok Brazing is used in all Koyorad Racing Radiators.  This ensures maximum durability, strength  and anticorrosion protection.  Nocolok Brazing uses anticorrosive flux, encouraging even flow of over fins and tubes forming a strong bond in our furnace.  With over 50 years of experience in manufacturing OE replacement radiators certifies our consistent high quality and durability. Radiator cap is not included\u003cbr\u003e\u003cbr\u003eThe Hyper V-Core Series is the newest to the Koyorad | Koyo All Aluminum Racing Radiator line up. An engine's cooling system in many newer vehicles are suffering due to limited space and crowding which affects air circulation. Our new ultra efficient Hyper V core was developed specifically for vehicles which see extreme heat, are limited in space, and where the factory inlet\/outlet locations eliminate the option for a proper N-FLO design. The Hyper V Series radiators have a specially designed fin and tube pitch which significantly increases its surface area while still allowing for excellent air circulation through the radiator. The Hyper V-Core series is the perfect solution where space savings and high performance is a must. Unless noted otherwise, all Koyorad Hyper V-Series All Aluminum Radiators are Nocolok brazed, designed as a factory fit, direct bolt in with no engine modifications necessary, and retain mounts for the stock fan shrouds and fans. See notes in individual item descriptions for details.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eImpreza WRX STi | GRB APPLIED A | 2007-2009 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GRB APPLIED B | 2009-2009 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GRB APPLIED C | 2010-2012 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GRB APPLIED D | 2012-2013 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GRB APPLIED E | 2013-2014 | TC | EJ207 | H4\u003c!--split--\u003e","published_at":"2019-06-19T17:06:35+08:00","created_at":"2019-06-19T17:06:36+08:00","vendor":"Koyorad","type":"Radiators","tags":["2007","2008","2009","2010","2011","2012","2013","2014","cooling","impreza-wrx-sti-grb-applied-a-2007-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-b-2009-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-c-2010-2012-tc-ej207-h4","impreza-wrx-sti-grb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-grb-applied-e-2013-2014-tc-ej207-h4","koyorad","mt","radiators","subaru","us1","ws124"],"price":55450,"price_min":55450,"price_max":55450,"available":true,"price_varies":false,"compare_at_price":67200,"compare_at_price_min":67200,"compare_at_price_max":67200,"compare_at_price_varies":false,"variants":[{"id":29165908918369,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"VH091662","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Koyorad HYPER V SERIES 36mm Radiator - Subaru - Impreza WRX STi GRB (A to E) (MT)","public_title":null,"options":["Default Title"],"price":55450,"weight":9443,"compare_at_price":67200,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Koyorad_491469ab-646e-409a-b183-a725489c7c60.jpg?v=1710182304"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Koyorad_491469ab-646e-409a-b183-a725489c7c60.jpg?v=1710182304","options":["Title"],"media":[{"alt":"Koyorad HYPER V SERIES 36mm Radiator - Subaru - Impreza WRX STi GRB (A to E) (MT) - VH091662 - RZCrewGarage","id":25353086599350,"position":1,"preview_image":{"aspect_ratio":1.509,"height":795,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Koyorad_491469ab-646e-409a-b183-a725489c7c60.jpg?v=1710182304"},"aspect_ratio":1.509,"height":795,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Koyorad_491469ab-646e-409a-b183-a725489c7c60.jpg?v=1710182304","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Koyorad\u003cbr\u003ePart Number: VH091662\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003eNocolok Brazing is used in all Koyorad Racing Radiators.  This ensures maximum durability, strength  and anticorrosion protection.  Nocolok Brazing uses anticorrosive flux, encouraging even flow of over fins and tubes forming a strong bond in our furnace.  With over 50 years of experience in manufacturing OE replacement radiators certifies our consistent high quality and durability. Radiator cap is not included\u003cbr\u003e\u003cbr\u003eThe Hyper V-Core Series is the newest to the Koyorad | Koyo All Aluminum Racing Radiator line up. An engine's cooling system in many newer vehicles are suffering due to limited space and crowding which affects air circulation. Our new ultra efficient Hyper V core was developed specifically for vehicles which see extreme heat, are limited in space, and where the factory inlet\/outlet locations eliminate the option for a proper N-FLO design. The Hyper V Series radiators have a specially designed fin and tube pitch which significantly increases its surface area while still allowing for excellent air circulation through the radiator. The Hyper V-Core series is the perfect solution where space savings and high performance is a must. Unless noted otherwise, all Koyorad Hyper V-Series All Aluminum Radiators are Nocolok brazed, designed as a factory fit, direct bolt in with no engine modifications necessary, and retain mounts for the stock fan shrouds and fans. See notes in individual item descriptions for details.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eImpreza WRX STi | GRB APPLIED A | 2007-2009 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GRB APPLIED B | 2009-2009 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GRB APPLIED C | 2010-2012 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GRB APPLIED D | 2012-2013 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GRB APPLIED E | 2013-2014 | TC | EJ207 | H4\u003c!--split--\u003e"}

{"id":2095451635809,"title":"Samco Japan - 6 Pcs Cooling Hoses Set Radiator - Mazda - RX-8 SE3P","handle":"samco-japan-6-pcs-cooling-hoses-set-radiator-mazda-rx-8-se3p-40tcs429-c","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Samco Japan\u003cbr\u003ePart Number: 40TCS429\/C\u003cbr\u003eHose Type: Cooling Hoses\u003cbr\u003eHose Numbers per set: 6\u003cbr\u003eHose Colour (Please leave us a note during checkout): Standard color:\tBlue \/ Red \/ Black \/ Green \/ Yellow \/ Orange\u003cbr\u003e\u003cbr\u003eSamco is the leader in the Cooling hose system for a reason. Their Unique 3 to 5 plies design ensure long lasting qualities to any type of usages: Boost, Cooling, Fueling. Their design is composed of:\u003cbr\u003eOuter surface coating to resist extreem deterioration to heat or cold.\u003cbr\u003eUnique 3 to 5 plies lamination superposing original silicone material and aramid fiber on 3 to 5 layers depending on the item and hose diameter, the strength exceeds by far any OEM units.\nThe 5 kg \/ cm2 normal maximum pressure resistance (in the case of inner diameter 25 mm) prevents hose expansion and \nburst.\u003cbr\u003ePrecise and carefully hand-made construction creates an extremely flat inner surface, completely eliminating stress on the fluid . In addition, \nall sections are covered by adopting suitable treatment for applications such as oil, fuel, heat resistance.\u003cbr\u003e\u003cbr\u003ePlease note that all Hoses from Samco are made to order: allow 6 to 8 weeks lead time. Colour are customisable on order, let us know during checkout in the notes. All Samco Hoses sold on our website are garantied original and follow their strict warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eRX-8 | SE3P Zenki | 2003-2008 | NA | 13B-MSP | R\u003cbr\u003eRX-8 | SE3P Kouki | 2008-2013 | NA | 13B-MSP | R\u003c!--split--\u003e","published_at":"2019-04-26T16:18:15+08:00","created_at":"2019-04-26T16:18:16+08:00","vendor":"Samco Japan","type":"Cooling Hoses","tags":["2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","cooling","cooling-hoses","coolinghoses","jp1","mazda","new","rx-8-se3p-kouki-2008-2013-na-13b-msp-r","rx-8-se3p-zenki-2003-2008-na-13b-msp-r","samco-japan","ws116"],"price":55700,"price_min":55700,"price_max":55700,"available":true,"price_varies":false,"compare_at_price":61500,"compare_at_price_min":61500,"compare_at_price_max":61500,"compare_at_price_varies":false,"variants":[{"id":19755639177313,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"40TCS429\/C","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Samco Japan - 6 Pcs Cooling Hoses Set Radiator - Mazda - RX-8 SE3P","public_title":null,"options":["Default Title"],"price":55700,"weight":6000,"compare_at_price":61500,"inventory_quantity":46,"inventory_management":"shopify","inventory_policy":"deny","barcode":"40TCS429C","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_radiator_hose_kit_37a56347-3bbb-4dca-8f1e-73148e6a8763.jpg?v=1688967687"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_radiator_hose_kit_37a56347-3bbb-4dca-8f1e-73148e6a8763.jpg?v=1688967687","options":["Title"],"media":[{"alt":"Samco Japan - 6 Pcs Cooling Hoses Set Radiator - Mazda - RX-8 SE3P - 40TCS429\/C - RZCREWGARAGE","id":26388476264630,"position":1,"preview_image":{"aspect_ratio":1.5,"height":1600,"width":2400,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_radiator_hose_kit_37a56347-3bbb-4dca-8f1e-73148e6a8763.jpg?v=1688967687"},"aspect_ratio":1.5,"height":1600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_radiator_hose_kit_37a56347-3bbb-4dca-8f1e-73148e6a8763.jpg?v=1688967687","width":2400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Samco Japan\u003cbr\u003ePart Number: 40TCS429\/C\u003cbr\u003eHose Type: Cooling Hoses\u003cbr\u003eHose Numbers per set: 6\u003cbr\u003eHose Colour (Please leave us a note during checkout): Standard color:\tBlue \/ Red \/ Black \/ Green \/ Yellow \/ Orange\u003cbr\u003e\u003cbr\u003eSamco is the leader in the Cooling hose system for a reason. Their Unique 3 to 5 plies design ensure long lasting qualities to any type of usages: Boost, Cooling, Fueling. Their design is composed of:\u003cbr\u003eOuter surface coating to resist extreem deterioration to heat or cold.\u003cbr\u003eUnique 3 to 5 plies lamination superposing original silicone material and aramid fiber on 3 to 5 layers depending on the item and hose diameter, the strength exceeds by far any OEM units.\nThe 5 kg \/ cm2 normal maximum pressure resistance (in the case of inner diameter 25 mm) prevents hose expansion and \nburst.\u003cbr\u003ePrecise and carefully hand-made construction creates an extremely flat inner surface, completely eliminating stress on the fluid . In addition, \nall sections are covered by adopting suitable treatment for applications such as oil, fuel, heat resistance.\u003cbr\u003e\u003cbr\u003ePlease note that all Hoses from Samco are made to order: allow 6 to 8 weeks lead time. Colour are customisable on order, let us know during checkout in the notes. All Samco Hoses sold on our website are garantied original and follow their strict warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eRX-8 | SE3P Zenki | 2003-2008 | NA | 13B-MSP | R\u003cbr\u003eRX-8 | SE3P Kouki | 2008-2013 | NA | 13B-MSP | R\u003c!--split--\u003e"}

{"id":380973482011,"title":"Koyorad HH Type 48mm Radiator - Mazda - RX-8 SE3P (MT)","handle":"koyorad-hh-type-48mm-radiator-mazda-rx-8-se3p-mt-hh062267","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Koyorad\u003cbr\u003ePart Number: HH062267\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003eNocolok Brazing is used in all Koyorad Racing Radiators.  This ensures maximum durability, strength  and anticorrosion protection.  Nocolok Brazing uses anticorrosive flux, encouraging even flow of over fins and tubes forming a strong bond in our furnace.  With over 50 years of experience in manufacturing OE replacement radiators certifies our consistent high quality and durability. Radiator cap is not included\u003cbr\u003e\u003cbr\u003eAll HH type Radiator are 48mm Thick!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eRX-8 | SE3P Zenki | 2003-2008 | NA | 13B-MSP | R\u003cbr\u003eRX-8 | SE3P Kouki | 2008-2013 | NA | 13B-MSP | R\u003c!--split--\u003e","published_at":"2017-11-28T23:36:31+08:00","created_at":"2017-11-28T23:36:31+08:00","vendor":"Koyorad","type":"Radiators","tags":["2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","cooling","koyorad","mazda","mt","radiators","rx-8-se3p-kouki-2008-2013-na-13b-msp-r","rx-8-se3p-zenki-2003-2008-na-13b-msp-r","us1","ws125"],"price":56900,"price_min":56900,"price_max":56900,"available":true,"price_varies":false,"compare_at_price":69000,"compare_at_price_min":69000,"compare_at_price_max":69000,"compare_at_price_varies":false,"variants":[{"id":4857909936155,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"HH062267","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Koyorad HH Type 48mm Radiator - Mazda - RX-8 SE3P (MT)","public_title":null,"options":["Default Title"],"price":56900,"weight":10486,"compare_at_price":69000,"inventory_quantity":18,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Koyorad_9a418851-2e26-4bbe-8341-068c02f2abfe.jpg?v=1710146113"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Koyorad_9a418851-2e26-4bbe-8341-068c02f2abfe.jpg?v=1710146113","options":["Title"],"media":[{"alt":"Koyorad HH Type 48mm Radiator - Mazda - RX-8 SE3P (MT) - HH062267 - RZCrewGarage","id":25353080799414,"position":1,"preview_image":{"aspect_ratio":1.509,"height":795,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Koyorad_9a418851-2e26-4bbe-8341-068c02f2abfe.jpg?v=1710146113"},"aspect_ratio":1.509,"height":795,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Koyorad_9a418851-2e26-4bbe-8341-068c02f2abfe.jpg?v=1710146113","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Koyorad\u003cbr\u003ePart Number: HH062267\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003eNocolok Brazing is used in all Koyorad Racing Radiators.  This ensures maximum durability, strength  and anticorrosion protection.  Nocolok Brazing uses anticorrosive flux, encouraging even flow of over fins and tubes forming a strong bond in our furnace.  With over 50 years of experience in manufacturing OE replacement radiators certifies our consistent high quality and durability. Radiator cap is not included\u003cbr\u003e\u003cbr\u003eAll HH type Radiator are 48mm Thick!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eRX-8 | SE3P Zenki | 2003-2008 | NA | 13B-MSP | R\u003cbr\u003eRX-8 | SE3P Kouki | 2008-2013 | NA | 13B-MSP | R\u003c!--split--\u003e"}

{"id":380973088795,"title":"Koyorad HYPER V SERIES 36mm Radiator - Mazda - MX-5 Miata Roadster NC (MT)","handle":"koyorad-hyper-v-series-36mm-radiator-mazda-mx-5-miata-roadster-nc-mt-vh061885","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Koyorad\u003cbr\u003ePart Number: VH061885\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003eNocolok Brazing is used in all Koyorad Racing Radiators.  This ensures maximum durability, strength  and anticorrosion protection.  Nocolok Brazing uses anticorrosive flux, encouraging even flow of over fins and tubes forming a strong bond in our furnace.  With over 50 years of experience in manufacturing OE replacement radiators certifies our consistent high quality and durability. Radiator cap is not included\u003cbr\u003e\u003cbr\u003eThe Hyper V-Core Series is the newest to the Koyorad | Koyo All Aluminum Racing Radiator line up. An engine's cooling system in many newer vehicles are suffering due to limited space and crowding which affects air circulation. Our new ultra efficient Hyper V core was developed specifically for vehicles which see extreme heat, are limited in space, and where the factory inlet\/outlet locations eliminate the option for a proper N-FLO design. The Hyper V Series radiators have a specially designed fin and tube pitch which significantly increases its surface area while still allowing for excellent air circulation through the radiator. The Hyper V-Core series is the perfect solution where space savings and high performance is a must. Unless noted otherwise, all Koyorad Hyper V-Series All Aluminum Radiators are Nocolok brazed, designed as a factory fit, direct bolt in with no engine modifications necessary, and retain mounts for the stock fan shrouds and fans. See notes in individual item descriptions for details.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMX-5 Miata Roadster | NCEC | 2005-2008 | NA | LF-VE | I4\u003cbr\u003eMX-5 Miata Roadster | NCEC RS | 2008-2015 | NA | LF-VE RS | I4\u003c!--split--\u003e","published_at":"2017-11-28T23:36:24+08:00","created_at":"2017-11-28T23:36:25+08:00","vendor":"Koyorad","type":"Radiators","tags":["2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","cooling","koyorad","mazda","mt","mx-5-miata-roadster-ncec-2005-2008-na-lf-ve-i4","mx-5-miata-roadster-ncec-rs-2008-2015-na-lf-ve-rs-i4","radiators","us1","ws125"],"price":57160,"price_min":57160,"price_max":57160,"available":true,"price_varies":false,"compare_at_price":69300,"compare_at_price_min":69300,"compare_at_price_max":69300,"compare_at_price_varies":false,"variants":[{"id":4857909182491,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"VH061885","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Koyorad HYPER V SERIES 36mm Radiator - Mazda - MX-5 Miata Roadster NC (MT)","public_title":null,"options":["Default Title"],"price":57160,"weight":9715,"compare_at_price":69300,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Koyorad_69547116-c7c3-4225-a37a-5c5ed21cda04.jpg?v=1710146110"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Koyorad_69547116-c7c3-4225-a37a-5c5ed21cda04.jpg?v=1710146110","options":["Title"],"media":[{"alt":"Koyorad HYPER V SERIES 36mm Radiator - Mazda - MX-5 Miata Roadster NC (MT) - VH061885 - RZCrewGarage","id":25353078997174,"position":1,"preview_image":{"aspect_ratio":1.509,"height":795,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Koyorad_69547116-c7c3-4225-a37a-5c5ed21cda04.jpg?v=1710146110"},"aspect_ratio":1.509,"height":795,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Koyorad_69547116-c7c3-4225-a37a-5c5ed21cda04.jpg?v=1710146110","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Koyorad\u003cbr\u003ePart Number: VH061885\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003eNocolok Brazing is used in all Koyorad Racing Radiators.  This ensures maximum durability, strength  and anticorrosion protection.  Nocolok Brazing uses anticorrosive flux, encouraging even flow of over fins and tubes forming a strong bond in our furnace.  With over 50 years of experience in manufacturing OE replacement radiators certifies our consistent high quality and durability. Radiator cap is not included\u003cbr\u003e\u003cbr\u003eThe Hyper V-Core Series is the newest to the Koyorad | Koyo All Aluminum Racing Radiator line up. An engine's cooling system in many newer vehicles are suffering due to limited space and crowding which affects air circulation. Our new ultra efficient Hyper V core was developed specifically for vehicles which see extreme heat, are limited in space, and where the factory inlet\/outlet locations eliminate the option for a proper N-FLO design. The Hyper V Series radiators have a specially designed fin and tube pitch which significantly increases its surface area while still allowing for excellent air circulation through the radiator. The Hyper V-Core series is the perfect solution where space savings and high performance is a must. Unless noted otherwise, all Koyorad Hyper V-Series All Aluminum Radiators are Nocolok brazed, designed as a factory fit, direct bolt in with no engine modifications necessary, and retain mounts for the stock fan shrouds and fans. See notes in individual item descriptions for details.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMX-5 Miata Roadster | NCEC | 2005-2008 | NA | LF-VE | I4\u003cbr\u003eMX-5 Miata Roadster | NCEC RS | 2008-2015 | NA | LF-VE RS | I4\u003c!--split--\u003e"}

{"id":7727510192310,"title":"Trust Greddy Oil Cooler Kit STD Suzuki Swift Sport ZC31S","handle":"trust-greddy-oil-cooler-kit-std-suzuki-swift-sport-zc31s-12094605","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Trust Greddy\u003cbr\u003ePart Number: 12094605\u003cbr\u003eNumber of Rows: 10 Rows\u003cbr\u003e\u003cbr\u003eThis oil cooler has big amount of core which equips offset fin inside of the core tube. And it helps to enrich the radiation, and at the same time, it prevents the pressure loss.\nThe “sandwich block” which is used at the place of original oil filter makes it possible to reduce the amount of parts and it helps your installation work easier.\nBy using TRUST OIL FILTER, the effect gets even better.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part is Universal\u003c!--split--\u003e","published_at":"2023-12-05T12:51:11+08:00","created_at":"2023-12-05T12:45:30+08:00","vendor":"Trust Greddy","type":"Oil Coolers","tags":["10rows","2004","2005","2006","2007","2008","2009","2010","cooling","jp1","oil-coolers","oilcoolers","suzuki","swift-sport-zc31s-2004-2010-na-m16a-i4","trust-greddy","ws116"],"price":59300,"price_min":59300,"price_max":59300,"available":true,"price_varies":false,"compare_at_price":64800,"compare_at_price_min":64800,"compare_at_price_max":64800,"compare_at_price_varies":false,"variants":[{"id":42533884657846,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"12094605","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Trust Greddy Oil Cooler Kit STD Suzuki Swift Sport ZC31S","public_title":null,"options":["Default Title"],"price":59300,"weight":6000,"compare_at_price":64800,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/trust-greddy-oil-cooler-kit-std-suzuki-swift-sport-zc31s-rzcrew.jpg?v=1710314417"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/trust-greddy-oil-cooler-kit-std-suzuki-swift-sport-zc31s-rzcrew.jpg?v=1710314417","options":["Title"],"media":[{"alt":"Trust Greddy Oil Cooler Kit STD Suzuki Swift Sport ZC31S -12094605 - RZCREWGARAGE","id":26909643702454,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/trust-greddy-oil-cooler-kit-std-suzuki-swift-sport-zc31s-rzcrew.jpg?v=1710314417"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/trust-greddy-oil-cooler-kit-std-suzuki-swift-sport-zc31s-rzcrew.jpg?v=1710314417","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Trust Greddy\u003cbr\u003ePart Number: 12094605\u003cbr\u003eNumber of Rows: 10 Rows\u003cbr\u003e\u003cbr\u003eThis oil cooler has big amount of core which equips offset fin inside of the core tube. And it helps to enrich the radiation, and at the same time, it prevents the pressure loss.\nThe “sandwich block” which is used at the place of original oil filter makes it possible to reduce the amount of parts and it helps your installation work easier.\nBy using TRUST OIL FILTER, the effect gets even better.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part is Universal\u003c!--split--\u003e"}

{"id":6097367957686,"title":"Mishimoto - X-Line Performance Aluminium Radiator - Subaru - Impreza WRX STi GRB\/GVB (MT)","handle":"mishimoto-x-line-performance-aluminium-radiator-subaru-impreza-wrx-sti-grb-gvb-mt-mmrad-sti-08x","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMRAD-STI-08X\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003eDirect fit for the 2008-2014 Subaru WRX, and 2008+ STI\u003cbr\u003e\nPremium radiator has 3-row (2\" thick) core for improved strength and reliability.\u003cbr\u003e\n16% thinner-than-stock tubes allow for more surface contact, increasing cooling efficiency.\u003cbr\u003e\nGreater density of rows for higher cooling capacity.\u003cbr\u003e\nMore contact points for additional heat transfer.\u003cbr\u003e\n3-row design creates more air turbulence, maximizing cooling efficiency\u003cbr\u003e\nIncludes magnetic drain plug\u003cbr\u003e\nIncludes a high-pressure 1.3 bar\u003cbr\u003e\nMishimoto radiator cap\u003cbr\u003e\nMishimoto Lifetime Warranty\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eImpreza WRX STi | GRB APPLIED A | 2007-2009 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GRB APPLIED B | 2009-2009 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GRB APPLIED C | 2010-2012 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GRB APPLIED D | 2012-2013 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GRB APPLIED E | 2013-2014 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GVB APPLIED C | 2007-2012 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GVB APPLIED D | 2012-2013 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GVB APPLIED E | 2013-2014 | TC | EJ207 | H4\u003cbr\u003e\u003cbr\u003eNote: MT Only!\u003c!--split--\u003eMT Only!","published_at":"2020-11-22T14:41:48+08:00","created_at":"2020-11-22T14:41:50+08:00","vendor":"Mishimoto","type":"Radiators","tags":["2007","2008","2009","2010","2011","2012","2013","2014","cooling","impreza-wrx-sti-grb-applied-a-2007-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-b-2009-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-c-2010-2012-tc-ej207-h4","impreza-wrx-sti-grb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-grb-applied-e-2013-2014-tc-ej207-h4","impreza-wrx-sti-gvb-applied-c-2007-2012-tc-ej207-h4","impreza-wrx-sti-gvb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-gvb-applied-e-2013-2014-tc-ej207-h4","mishimoto","mt","radiators","subaru","us1","ws125"],"price":60530,"price_min":60530,"price_max":60530,"available":true,"price_varies":false,"compare_at_price":74400,"compare_at_price_min":74400,"compare_at_price_max":74400,"compare_at_price_varies":false,"variants":[{"id":37591131226294,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMRAD-STI-08X","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - X-Line Performance Aluminium Radiator - Subaru - Impreza WRX STi GRB\/GVB (MT)","public_title":null,"options":["Default Title"],"price":60530,"weight":11530,"compare_at_price":74400,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMRAD-STI-08X_e0eebc07-c280-4c03-b6c1-3279fc01adaa.jpg?v=1710194633"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMRAD-STI-08X_e0eebc07-c280-4c03-b6c1-3279fc01adaa.jpg?v=1710194633","options":["Title"],"media":[{"alt":"Mishimoto - X-Line Performance Aluminium Radiator - Subaru - Impreza WRX STi GRB\/GVB (MT) - MMRAD-STI-08X - RZCREWGARAGE","id":25382060687542,"position":1,"preview_image":{"aspect_ratio":1.0,"height":700,"width":700,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMRAD-STI-08X_e0eebc07-c280-4c03-b6c1-3279fc01adaa.jpg?v=1710194633"},"aspect_ratio":1.0,"height":700,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMRAD-STI-08X_e0eebc07-c280-4c03-b6c1-3279fc01adaa.jpg?v=1710194633","width":700}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMRAD-STI-08X\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003eDirect fit for the 2008-2014 Subaru WRX, and 2008+ STI\u003cbr\u003e\nPremium radiator has 3-row (2\" thick) core for improved strength and reliability.\u003cbr\u003e\n16% thinner-than-stock tubes allow for more surface contact, increasing cooling efficiency.\u003cbr\u003e\nGreater density of rows for higher cooling capacity.\u003cbr\u003e\nMore contact points for additional heat transfer.\u003cbr\u003e\n3-row design creates more air turbulence, maximizing cooling efficiency\u003cbr\u003e\nIncludes magnetic drain plug\u003cbr\u003e\nIncludes a high-pressure 1.3 bar\u003cbr\u003e\nMishimoto radiator cap\u003cbr\u003e\nMishimoto Lifetime Warranty\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eImpreza WRX STi | GRB APPLIED A | 2007-2009 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GRB APPLIED B | 2009-2009 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GRB APPLIED C | 2010-2012 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GRB APPLIED D | 2012-2013 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GRB APPLIED E | 2013-2014 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GVB APPLIED C | 2007-2012 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GVB APPLIED D | 2012-2013 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GVB APPLIED E | 2013-2014 | TC | EJ207 | H4\u003cbr\u003e\u003cbr\u003eNote: MT Only!\u003c!--split--\u003eMT Only!"}

{"id":2095444197473,"title":"HPI - 50mm Radiator Evolve Type STD - Mazda - RX-8 SE3P (MT)","handle":"hpi-50mm-radiator-evolve-type-std-mazda-rx-8-se3p-mt-hpare-se3p","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HPI\u003cbr\u003ePart Number: HPARE-SE3P\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003eThe HPI Evolve line of radiators are fully made in aluminum in Japan. Targetting better flow and high efficiency cooling for the street to the track. By expanding its water capacity and heat exchange area, this radiator helps in keeping your temperature down in any condition avoiding dramatic engine failure. The Evolve line is diversified in 3 categories:\u003cbr\u003eSTD: For hardcore motorsport and competition usage!\u003cbr\u003eSH: Lighter an thinner than the STD for street use.\u003cbr\u003e MF: Standing for Multi flow, the radiator core involves a complex multi turn inner cooling passage for more stable temperature on the long run. It will fits endurance racing! \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eRX-8 | SE3P Zenki | 2003-2008 | NA | 13B-MSP | R\u003cbr\u003eRX-8 | SE3P Kouki | 2008-2013 | NA | 13B-MSP | R\u003cbr\u003e\u003cbr\u003eNote: MT Only!\u003c!--split--\u003eMT Only!","published_at":"2019-04-26T16:15:11+08:00","created_at":"2019-04-26T16:15:12+08:00","vendor":"HPI","type":"Radiators","tags":["2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","cooling","hpi","jp1","mazda","mt","radiators","rx-8-se3p-kouki-2008-2013-na-13b-msp-r","rx-8-se3p-zenki-2003-2008-na-13b-msp-r","ws113"],"price":60700,"price_min":60700,"price_max":60700,"available":true,"price_varies":false,"compare_at_price":63800,"compare_at_price_min":63800,"compare_at_price_max":63800,"compare_at_price_varies":false,"variants":[{"id":19755598250081,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"HPARE-SE3P","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HPI - 50mm Radiator Evolve Type STD - Mazda - RX-8 SE3P (MT)","public_title":null,"options":["Default Title"],"price":60700,"weight":17000,"compare_at_price":63800,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/HPI-Radiator.jpg?v=1710179314"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/HPI-Radiator.jpg?v=1710179314","options":["Title"],"media":[{"alt":"HPI - 50mm Radiator Evolve Type STD - Mazda - RX-8 SE3P (MT) - HPARE-SE3P - RZCREWGARAGE","id":26388471185590,"position":1,"preview_image":{"aspect_ratio":2.273,"height":440,"width":1000,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/HPI-Radiator.jpg?v=1710179314"},"aspect_ratio":2.273,"height":440,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/HPI-Radiator.jpg?v=1710179314","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HPI\u003cbr\u003ePart Number: HPARE-SE3P\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003eThe HPI Evolve line of radiators are fully made in aluminum in Japan. Targetting better flow and high efficiency cooling for the street to the track. By expanding its water capacity and heat exchange area, this radiator helps in keeping your temperature down in any condition avoiding dramatic engine failure. The Evolve line is diversified in 3 categories:\u003cbr\u003eSTD: For hardcore motorsport and competition usage!\u003cbr\u003eSH: Lighter an thinner than the STD for street use.\u003cbr\u003e MF: Standing for Multi flow, the radiator core involves a complex multi turn inner cooling passage for more stable temperature on the long run. It will fits endurance racing! \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eRX-8 | SE3P Zenki | 2003-2008 | NA | 13B-MSP | R\u003cbr\u003eRX-8 | SE3P Kouki | 2008-2013 | NA | 13B-MSP | R\u003cbr\u003e\u003cbr\u003eNote: MT Only!\u003c!--split--\u003eMT Only!"}

{"id":6097367826614,"title":"Mishimoto - X-Line Performance Aluminium Radiator - Honda - S2000 AP1\/AP2 (MT)","handle":"mishimoto-x-line-performance-aluminium-radiator-honda-s2000-ap1-ap2-mt-mmrad-s2k-00x","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMRAD-S2K-00X\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003ePremium radiator has 3-row core for improved strength and reliability.\u003cbr\u003e\n16% thinner-than-stock tubes allow for more surface contact, increasing cooling efficiency.\u003cbr\u003e\nIncludes 1\/8\" NPT port for use with additional temperature sensors\u003cbr\u003e\nGreater density of rows for higher cooling capacity.\u003cbr\u003e\nMore contact points for additional heat\u003cbr\u003e\nMishimoto Lifetime Warranty\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eS2000 | AP1 | 1999-2003 | NA | F20C | I4\u003cbr\u003eS2000 | AP2 | 2003-2009 | NA | F22C | I4\u003cbr\u003e\u003cbr\u003eNote: MT Only!\u003c!--split--\u003eMT Only!","published_at":"2020-11-22T14:41:42+08:00","created_at":"2020-11-22T14:41:43+08:00","vendor":"Mishimoto","type":"Radiators","tags":["1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","cooling","honda","mishimoto","mt","radiators","s2000-ap1-1999-2003-na-f20c-i4","s2000-ap2-2003-2009-na-f22c-i4","us1","ws125"],"price":61830,"price_min":61830,"price_max":61830,"available":true,"price_varies":false,"compare_at_price":76000,"compare_at_price_min":76000,"compare_at_price_max":76000,"compare_at_price_varies":false,"variants":[{"id":37591131095222,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMRAD-S2K-00X","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - X-Line Performance Aluminium Radiator - Honda - S2000 AP1\/AP2 (MT)","public_title":null,"options":["Default Title"],"price":61830,"weight":12074,"compare_at_price":76000,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMRAD-S2K-00X_d81676a7-127f-487c-99e1-f06c8e6daec3.jpg?v=1710194631"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMRAD-S2K-00X_d81676a7-127f-487c-99e1-f06c8e6daec3.jpg?v=1710194631","options":["Title"],"media":[{"alt":"Mishimoto - X-Line Performance Aluminium Radiator - Honda - S2000 AP1\/AP2 (MT) - MMRAD-S2K-00X - RZCREWGARAGE","id":25382060294326,"position":1,"preview_image":{"aspect_ratio":1.0,"height":700,"width":700,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMRAD-S2K-00X_d81676a7-127f-487c-99e1-f06c8e6daec3.jpg?v=1710194631"},"aspect_ratio":1.0,"height":700,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMRAD-S2K-00X_d81676a7-127f-487c-99e1-f06c8e6daec3.jpg?v=1710194631","width":700}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMRAD-S2K-00X\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003ePremium radiator has 3-row core for improved strength and reliability.\u003cbr\u003e\n16% thinner-than-stock tubes allow for more surface contact, increasing cooling efficiency.\u003cbr\u003e\nIncludes 1\/8\" NPT port for use with additional temperature sensors\u003cbr\u003e\nGreater density of rows for higher cooling capacity.\u003cbr\u003e\nMore contact points for additional heat\u003cbr\u003e\nMishimoto Lifetime Warranty\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eS2000 | AP1 | 1999-2003 | NA | F20C | I4\u003cbr\u003eS2000 | AP2 | 2003-2009 | NA | F22C | I4\u003cbr\u003e\u003cbr\u003eNote: MT Only!\u003c!--split--\u003eMT Only!"}

{"id":2095451865185,"title":"Samco Japan - 3 Pcs Cooling Hoses Set Radiator - Mazda - 3 Axela BK3P","handle":"samco-japan-3-pcs-cooling-hoses-set-radiator-mazda-3-axela-bk3p-40tcs388-c","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Samco Japan\u003cbr\u003ePart Number: 40TCS388\/C\u003cbr\u003eHose Type: Cooling Hoses\u003cbr\u003eHose Numbers per set: 3\u003cbr\u003eHose Colour (Please leave us a note during checkout): Standard color:\tBlue \/ Red \/ Black \/ Green \/ Yellow \/ Orange\u003cbr\u003e\u003cbr\u003eSamco is the leader in the Cooling hose system for a reason. Their Unique 3 to 5 plies design ensure long lasting qualities to any type of usages: Boost, Cooling, Fueling. Their design is composed of:\u003cbr\u003eOuter surface coating to resist extreem deterioration to heat or cold.\u003cbr\u003eUnique 3 to 5 plies lamination superposing original silicone material and aramid fiber on 3 to 5 layers depending on the item and hose diameter, the strength exceeds by far any OEM units.\nThe 5 kg \/ cm2 normal maximum pressure resistance (in the case of inner diameter 25 mm) prevents hose expansion and \nburst.\u003cbr\u003ePrecise and carefully hand-made construction creates an extremely flat inner surface, completely eliminating stress on the fluid . In addition, \nall sections are covered by adopting suitable treatment for applications such as oil, fuel, heat resistance.\u003cbr\u003e\u003cbr\u003ePlease note that all Hoses from Samco are made to order: allow 6 to 8 weeks lead time. Colour are customisable on order, let us know during checkout in the notes. All Samco Hoses sold on our website are garantied original and follow their strict warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e3 Axela | BK3P | 2003-2009 | NA | L3-VE | I4\u003c!--split--\u003e","published_at":"2019-04-26T16:18:22+08:00","created_at":"2019-04-26T16:18:23+08:00","vendor":"Samco Japan","type":"Cooling Hoses","tags":["2003","2004","2005","2006","2007","2008","2009","3-axela-bk3p-2003-2009-na-l3-ve-i4","cooling","cooling-hoses","coolinghoses","jp1","mazda","new","samco-japan","ws116"],"price":64300,"price_min":64300,"price_max":64300,"available":true,"price_varies":false,"compare_at_price":71200,"compare_at_price_min":71200,"compare_at_price_max":71200,"compare_at_price_varies":false,"variants":[{"id":19755639668833,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"40TCS388\/C","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Samco Japan - 3 Pcs Cooling Hoses Set Radiator - Mazda - 3 Axela BK3P","public_title":null,"options":["Default Title"],"price":64300,"weight":6000,"compare_at_price":71200,"inventory_quantity":46,"inventory_management":"shopify","inventory_policy":"deny","barcode":"40TCS388C","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Samco_3_pieces_hose_set_5a56092c-1b4c-4844-9c0d-f843a6dbcc34.jpg?v=1710179409"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Samco_3_pieces_hose_set_5a56092c-1b4c-4844-9c0d-f843a6dbcc34.jpg?v=1710179409","options":["Title"],"media":[{"alt":"Samco Japan - 3 Pcs Cooling Hoses Set Radiator - Mazda - 3 Axela BK3P - 40TCS388\/C - RZCREWGARAGE","id":26388476461238,"position":1,"preview_image":{"aspect_ratio":1.32,"height":325,"width":429,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Samco_3_pieces_hose_set_5a56092c-1b4c-4844-9c0d-f843a6dbcc34.jpg?v=1710179409"},"aspect_ratio":1.32,"height":325,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Samco_3_pieces_hose_set_5a56092c-1b4c-4844-9c0d-f843a6dbcc34.jpg?v=1710179409","width":429}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Samco Japan\u003cbr\u003ePart Number: 40TCS388\/C\u003cbr\u003eHose Type: Cooling Hoses\u003cbr\u003eHose Numbers per set: 3\u003cbr\u003eHose Colour (Please leave us a note during checkout): Standard color:\tBlue \/ Red \/ Black \/ Green \/ Yellow \/ Orange\u003cbr\u003e\u003cbr\u003eSamco is the leader in the Cooling hose system for a reason. Their Unique 3 to 5 plies design ensure long lasting qualities to any type of usages: Boost, Cooling, Fueling. Their design is composed of:\u003cbr\u003eOuter surface coating to resist extreem deterioration to heat or cold.\u003cbr\u003eUnique 3 to 5 plies lamination superposing original silicone material and aramid fiber on 3 to 5 layers depending on the item and hose diameter, the strength exceeds by far any OEM units.\nThe 5 kg \/ cm2 normal maximum pressure resistance (in the case of inner diameter 25 mm) prevents hose expansion and \nburst.\u003cbr\u003ePrecise and carefully hand-made construction creates an extremely flat inner surface, completely eliminating stress on the fluid . In addition, \nall sections are covered by adopting suitable treatment for applications such as oil, fuel, heat resistance.\u003cbr\u003e\u003cbr\u003ePlease note that all Hoses from Samco are made to order: allow 6 to 8 weeks lead time. Colour are customisable on order, let us know during checkout in the notes. All Samco Hoses sold on our website are garantied original and follow their strict warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e3 Axela | BK3P | 2003-2009 | NA | L3-VE | I4\u003c!--split--\u003e"}

{"id":4387916447841,"title":"Mishimoto - Aluminum X-LINE (Thicker Core) Radiator - Mitsubishi - Lancer Evolution X CZ4A (MT)","handle":"mishimoto-aluminum-x-line-thicker-core-radiator-mitsubishi-lancer-evolution-x-cz4a-mt-mmrad-evo-10x","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMRAD-EVO-10X\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Triple Core\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eLancer Evolution X | CZ4A Zenki (GSR Jdm\/MR) | 2007-2008 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Chuki (GSR Jdm\/MR) | 2008-2009 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Kouki (GSR Jdm\/MR) | 2009-2017 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Zenki (RS Jdm\/GSR) | 2007-2008 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Chuki (RS Jdm\/GSR) | 2008-2009 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Kouki (RS Jdm\/GSR) | 2009-2017 | TC | 4B11 | I4\u003c!--split--\u003e","published_at":"2019-11-26T17:07:28+08:00","created_at":"2019-11-26T17:07:30+08:00","vendor":"Mishimoto","type":"Radiators","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","cooling","lancer-evolution-x-cz4a-chuki-gsr-jdmmr-2008-2009-tc-4b11-i4","lancer-evolution-x-cz4a-chuki-rs-jdmgsr-2008-2009-tc-4b11-i4","lancer-evolution-x-cz4a-kouki-gsr-jdmmr-2009-2017-tc-4b11-i4","lancer-evolution-x-cz4a-kouki-rs-jdmgsr-2009-2017-tc-4b11-i4","lancer-evolution-x-cz4a-zenki-gsr-jdmmr-2007-2008-tc-4b11-i4","lancer-evolution-x-cz4a-zenki-rs-jdmgsr-2007-2008-tc-4b11-i4","mishimoto","mitsubishi","mt","radiators","us1","ws125"],"price":65080,"price_min":65080,"price_max":65080,"available":true,"price_varies":false,"compare_at_price":80000,"compare_at_price_min":80000,"compare_at_price_max":80000,"compare_at_price_varies":false,"variants":[{"id":31375606382689,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMRAD-EVO-10X","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Aluminum X-LINE (Thicker Core) Radiator - Mitsubishi - Lancer Evolution X CZ4A (MT)","public_title":null,"options":["Default Title"],"price":65080,"weight":16111,"compare_at_price":80000,"inventory_quantity":17,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMRAD-EVO-10X_e0ac1c18-705b-4d5b-b0cc-c5f7b7f7ad52.jpg?v=1710190304"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMRAD-EVO-10X_e0ac1c18-705b-4d5b-b0cc-c5f7b7f7ad52.jpg?v=1710190304","options":["Title"],"media":[{"alt":"Mishimoto - Aluminum X-LINE (Thicker Core) Radiator - Mitsubishi - Lancer Evolution X CZ4A (MT) - MMRAD-EVO-10X - RZCREWGARAGE","id":25382036832438,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMRAD-EVO-10X_e0ac1c18-705b-4d5b-b0cc-c5f7b7f7ad52.jpg?v=1710190304"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMRAD-EVO-10X_e0ac1c18-705b-4d5b-b0cc-c5f7b7f7ad52.jpg?v=1710190304","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMRAD-EVO-10X\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Triple Core\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eLancer Evolution X | CZ4A Zenki (GSR Jdm\/MR) | 2007-2008 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Chuki (GSR Jdm\/MR) | 2008-2009 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Kouki (GSR Jdm\/MR) | 2009-2017 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Zenki (RS Jdm\/GSR) | 2007-2008 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Chuki (RS Jdm\/GSR) | 2008-2009 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Kouki (RS Jdm\/GSR) | 2009-2017 | TC | 4B11 | I4\u003c!--split--\u003e"}

{"id":7107547693238,"title":"KOYO 48mm Type F Aluminium Radiator Honda Civic Type R FD2R KH081893R","handle":"koyo-48mm-type-f-aluminium-radiator-honda-civic-type-r-fd2r-kh081893r-kh081893r","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: KOYO\u003cbr\u003ePart Number: KH081893R\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003eThis item is designed as a direct replacement for the factory radiator. Developed as a top level version for superior cooling on high tuned engines. A great choice for ideal balance between superior cooling and ultra light weight construction with beautiful finish.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic Type R | FD2R | 2007-2010 | NA | K20A | I4\u003cbr\u003e\u003cbr\u003eNote: MT Only!\u003c!--split--\u003eMT Only!","published_at":"2021-10-15T13:39:07+08:00","created_at":"2021-10-15T13:39:08+08:00","vendor":"KOYO","type":"Radiators","tags":["2007","2008","2009","2010","civic-type-r-fd2r-2007-2010-na-k20a-i4","cooling","honda","jp1","koyo","mt","radiators","ws119"],"price":78200,"price_min":78200,"price_max":78200,"available":true,"price_varies":false,"compare_at_price":90200,"compare_at_price_min":90200,"compare_at_price_max":90200,"compare_at_price_varies":false,"variants":[{"id":40749721288886,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"KH081893R","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"KOYO 48mm Type F Aluminium Radiator Honda Civic Type R FD2R KH081893R","public_title":null,"options":["Default Title"],"price":78200,"weight":17000,"compare_at_price":90200,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/koyo-48mm-type-f-aluminium-radiator-honda-civic-type-r-fd2r-kh081893r-rzcrew.jpg?v=1710322529"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/koyo-48mm-type-f-aluminium-radiator-honda-civic-type-r-fd2r-kh081893r-rzcrew.jpg?v=1710322529","options":["Title"],"media":[{"alt":"KOYO - 48mm Type F Aluminium Radiator - Honda - Civic Type R FD2R - KH081893R - KH081893R - RZCREWGARAGE","id":26388496613558,"position":1,"preview_image":{"aspect_ratio":1.5,"height":1600,"width":2400,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/koyo-48mm-type-f-aluminium-radiator-honda-civic-type-r-fd2r-kh081893r-rzcrew.jpg?v=1710322529"},"aspect_ratio":1.5,"height":1600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/koyo-48mm-type-f-aluminium-radiator-honda-civic-type-r-fd2r-kh081893r-rzcrew.jpg?v=1710322529","width":2400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: KOYO\u003cbr\u003ePart Number: KH081893R\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003eThis item is designed as a direct replacement for the factory radiator. Developed as a top level version for superior cooling on high tuned engines. A great choice for ideal balance between superior cooling and ultra light weight construction with beautiful finish.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic Type R | FD2R | 2007-2010 | NA | K20A | I4\u003cbr\u003e\u003cbr\u003eNote: MT Only!\u003c!--split--\u003eMT Only!"}

{"id":561990926363,"title":"Mishimoto - Mazda RX8 Oil Line Kit - SE3P - MMSBH-RX8-04K","handle":"mishimoto-mazda-rx8-oil-line-kit-se3p-mmsbh-rx8-04k","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMSBH-RX8-04K\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2004–2011 Mazda RX-8\u003cbr\u003ePremade braided stainless steel oil lines and aluminum fittings replace corrosion-prone stock rubber lines\u003cbr\u003eFull kit includes four braided stainless steel oil lines, M18 banjo bolts, and all the necessary fittings and oil seals for a trouble-free installation\u003cbr\u003eOil lines come prelabeled for easy identification\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Stainless Steel\u003cbr\u003eMax Recommended PSI 750psi\u003cbr\u003eMin Temp -40°F\u003cbr\u003eNote This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eMax Temp +300°F\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 13B-MSP (Renesis)\u003cbr\u003eChassis Codes SE3P\u003cbr\u003eCaution This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) 2ft, 4in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(1) 4ft, 8in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 4in Stainless Steel Braided Hose with 45 Degree and Straight -10AN Fittings\u003cbr\u003e(1) 2ft, 2in Stainless Steel Braided Hose with 90 Degree and Straight -10AN Fittings\u003cbr\u003e(4) M18 x -10AN Fittings w\/ Dowty Oil Seals\u003cbr\u003e(2) M18 x -10AN Banjo Bolts w\/ Dowty Oil Seals\u003cbr\u003e(1) 10AN – 10AN Male Connector\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mazda RX-8 has a high-winding rotary engine capable of easily reaching 9,000 RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX-8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine’s oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber oil lines and steel fittings can severely corrode and degrade over time. \u003cbr\u003e\u003cbr\u003eThis full kit from Mishimoto replaces all the RX-8 oil cooler lines with braided stainless units and aluminum fittings that will not corrode or degrade over time. This oil line kit also replaces the most frequent line to corrode, which is located on the left hand side of the car near the front suspension assembly. With Mishimoto replacement Mazda RX-8 oil cooler lines, all oil lines between the engine and both oil coolers are replaced, including the intermediate line that spans both oil coolers found in all manual transmission models. \u003cbr\u003e\u003cbr\u003eThese Mazda RX-8 oil cooler lines fit onto the vehicle with no additional modification, and d not require any cutting to your vehicle or permanent removal of parts. This oil line kit comes with all banjo bolts, M18 fittings, and a male to male -10AN connector to complete the installation. Keep your RX-8 protected and running smooth! As with all our products, these RX-8 oil cooler lines include the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2004–2011 Mazda RX-8\u003cbr\u003ePremade braided stainless steel oil lines and aluminum fittings replace corrosion-prone stock rubber lines\u003cbr\u003eFull kit includes four braided stainless steel oil lines, M18 banjo bolts, and all the necessary fittings and oil seals for a trouble-free installation\u003cbr\u003eOil lines come prelabeled for easy identification\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Stainless Steel\u003cbr\u003eMax Recommended PSI 750psi\u003cbr\u003eMin Temp -40°F\u003cbr\u003eNote This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eMax Temp +300°F\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 13B-MSP (Renesis)\u003cbr\u003eChassis Codes SE3P\u003cbr\u003eCaution This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) 2ft, 4in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(1) 4ft, 8in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 4in Stainless Steel Braided Hose with 45 Degree and Straight -10AN Fittings\u003cbr\u003e(1) 2ft, 2in Stainless Steel Braided Hose with 90 Degree and Straight -10AN Fittings\u003cbr\u003e(4) M18 x -10AN Fittings w\/ Dowty Oil Seals\u003cbr\u003e(2) M18 x -10AN Banjo Bolts w\/ Dowty Oil Seals\u003cbr\u003e(1) 10AN – 10AN Male Connector\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mazda RX-8 has a high-winding rotary engine capable of easily reaching 9,000 RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX-8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine’s oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber oil lines and steel fittings can severely corrode and degrade over time. \u003cbr\u003e\u003cbr\u003eThis full kit from Mishimoto replaces all the RX-8 oil cooler lines with braided stainless units and aluminum fittings that will not corrode or degrade over time. This oil line kit also replaces the most frequent line to corrode, which is located on the left hand side of the car near the front suspension assembly. With Mishimoto replacement Mazda RX-8 oil cooler lines, all oil lines between the engine and both oil coolers are replaced, including the intermediate line that spans both oil coolers found in all manual transmission models. \u003cbr\u003e\u003cbr\u003eThese Mazda RX-8 oil cooler lines fit onto the vehicle with no additional modification, and d not require any cutting to your vehicle or permanent removal of parts. This oil line kit comes with all banjo bolts, M18 fittings, and a male to male -10AN connector to complete the installation. Keep your RX-8 protected and running smooth! As with all our products, these RX-8 oil cooler lines include the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:25:05+08:00","created_at":"2018-01-24T23:25:05+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","car-specific","cooling","mazda","mishimoto","oil-cooler-hoses","oil-coolers","rx-8-se3p-kouki-2008-2013-na-13b-msp-r","rx-8-se3p-zenki-2003-2008-na-13b-msp-r","us1","ws122"],"price":78580,"price_min":78580,"price_max":78580,"available":true,"price_varies":false,"compare_at_price":92000,"compare_at_price_min":92000,"compare_at_price_max":92000,"compare_at_price_varies":false,"variants":[{"id":5990388203547,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMSBH-RX8-04K","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Mazda RX8 Oil Line Kit - SE3P - MMSBH-RX8-04K","public_title":null,"options":["Default Title"],"price":78580,"weight":7719,"compare_at_price":92000,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMSBH-RX8-04K.jpg?v=1710154108"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMSBH-RX8-04K.jpg?v=1710154108","options":["Title"],"media":[{"alt":"Mishimoto - Mazda RX8 Oil Line Kit - SE3P - MMSBH-RX8-04K - Rzcrewgarage","id":1351401504865,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMSBH-RX8-04K.jpg?v=1710154108"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMSBH-RX8-04K.jpg?v=1710154108","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMSBH-RX8-04K\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2004–2011 Mazda RX-8\u003cbr\u003ePremade braided stainless steel oil lines and aluminum fittings replace corrosion-prone stock rubber lines\u003cbr\u003eFull kit includes four braided stainless steel oil lines, M18 banjo bolts, and all the necessary fittings and oil seals for a trouble-free installation\u003cbr\u003eOil lines come prelabeled for easy identification\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Stainless Steel\u003cbr\u003eMax Recommended PSI 750psi\u003cbr\u003eMin Temp -40°F\u003cbr\u003eNote This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eMax Temp +300°F\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 13B-MSP (Renesis)\u003cbr\u003eChassis Codes SE3P\u003cbr\u003eCaution This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) 2ft, 4in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(1) 4ft, 8in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 4in Stainless Steel Braided Hose with 45 Degree and Straight -10AN Fittings\u003cbr\u003e(1) 2ft, 2in Stainless Steel Braided Hose with 90 Degree and Straight -10AN Fittings\u003cbr\u003e(4) M18 x -10AN Fittings w\/ Dowty Oil Seals\u003cbr\u003e(2) M18 x -10AN Banjo Bolts w\/ Dowty Oil Seals\u003cbr\u003e(1) 10AN – 10AN Male Connector\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mazda RX-8 has a high-winding rotary engine capable of easily reaching 9,000 RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX-8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine’s oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber oil lines and steel fittings can severely corrode and degrade over time. \u003cbr\u003e\u003cbr\u003eThis full kit from Mishimoto replaces all the RX-8 oil cooler lines with braided stainless units and aluminum fittings that will not corrode or degrade over time. This oil line kit also replaces the most frequent line to corrode, which is located on the left hand side of the car near the front suspension assembly. With Mishimoto replacement Mazda RX-8 oil cooler lines, all oil lines between the engine and both oil coolers are replaced, including the intermediate line that spans both oil coolers found in all manual transmission models. \u003cbr\u003e\u003cbr\u003eThese Mazda RX-8 oil cooler lines fit onto the vehicle with no additional modification, and d not require any cutting to your vehicle or permanent removal of parts. This oil line kit comes with all banjo bolts, M18 fittings, and a male to male -10AN connector to complete the installation. Keep your RX-8 protected and running smooth! As with all our products, these RX-8 oil cooler lines include the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2004–2011 Mazda RX-8\u003cbr\u003ePremade braided stainless steel oil lines and aluminum fittings replace corrosion-prone stock rubber lines\u003cbr\u003eFull kit includes four braided stainless steel oil lines, M18 banjo bolts, and all the necessary fittings and oil seals for a trouble-free installation\u003cbr\u003eOil lines come prelabeled for easy identification\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Stainless Steel\u003cbr\u003eMax Recommended PSI 750psi\u003cbr\u003eMin Temp -40°F\u003cbr\u003eNote This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eMax Temp +300°F\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 13B-MSP (Renesis)\u003cbr\u003eChassis Codes SE3P\u003cbr\u003eCaution This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) 2ft, 4in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(1) 4ft, 8in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 4in Stainless Steel Braided Hose with 45 Degree and Straight -10AN Fittings\u003cbr\u003e(1) 2ft, 2in Stainless Steel Braided Hose with 90 Degree and Straight -10AN Fittings\u003cbr\u003e(4) M18 x -10AN Fittings w\/ Dowty Oil Seals\u003cbr\u003e(2) M18 x -10AN Banjo Bolts w\/ Dowty Oil Seals\u003cbr\u003e(1) 10AN – 10AN Male Connector\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mazda RX-8 has a high-winding rotary engine capable of easily reaching 9,000 RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX-8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine’s oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber oil lines and steel fittings can severely corrode and degrade over time. \u003cbr\u003e\u003cbr\u003eThis full kit from Mishimoto replaces all the RX-8 oil cooler lines with braided stainless units and aluminum fittings that will not corrode or degrade over time. This oil line kit also replaces the most frequent line to corrode, which is located on the left hand side of the car near the front suspension assembly. With Mishimoto replacement Mazda RX-8 oil cooler lines, all oil lines between the engine and both oil coolers are replaced, including the intermediate line that spans both oil coolers found in all manual transmission models. \u003cbr\u003e\u003cbr\u003eThese Mazda RX-8 oil cooler lines fit onto the vehicle with no additional modification, and d not require any cutting to your vehicle or permanent removal of parts. This oil line kit comes with all banjo bolts, M18 fittings, and a male to male -10AN connector to complete the installation. Keep your RX-8 protected and running smooth! As with all our products, these RX-8 oil cooler lines include the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":6097365663926,"title":"Mishimoto - Performance Aluminium Radiator - BMW - 3 Series 335i E90(335i)('07) (MT)","handle":"mishimoto-performance-aluminium-radiator-bmw-3-series-335i-e90335i07-mt-mmrad-e90-07","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMRAD-E90-07\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003eThe E90 BMW is a great platform for soaking up highway miles during the weekday and taking to the track on the weekend. Aggressive driving results in increased engine temperatures necessitating an effective solution for keeping your straight six cool. Mishimoto has the perfect upgrade, the BMW 335i\/335xi\/135i Performance Aluminum Radiator, to eliminate rising temperatures. The Mishimoto 335i\/335xi\/135i radiator features all-aluminum construction with TIG-welded end tanks to a 100% brazed aluminum core and CNC-machined quick-disconnect inlet and outlet connections. This radiator is constructed from high-quality aircraft aluminum with a brushed finish for the perfect combination of performance and style. The Mishimoto 335i\/335xi\/135i radiator is precision engineered for flawless drop-in fitment while providing a 35% increase in coolant capacity. This radiator also includes a Mishimoto Magnetic Drain Plug with dowty seal, which removes circulating metal fragments from the cooling system, providing further engine protection. As with all our products, this radiator includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship. Say goodbye to the days of broken stock plastic inlet and outlet connections! \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e3 Series 335i | E90 | 2007-2010 | TC | N54B30 | I6\u003cbr\u003e\u003cbr\u003eNote: MT Only!\u003c!--split--\u003eMT Only!","published_at":"2020-11-22T14:40:26+08:00","created_at":"2020-11-22T14:40:30+08:00","vendor":"Mishimoto","type":"Radiators","tags":["1-series-135i-e88-2007-2010-tc-n54b30-i6","2007","2008","2009","2010","bmw","cooling","mishimoto","mt","radiators","us1","ws127"],"price":80150,"price_min":80150,"price_max":80150,"available":true,"price_varies":false,"compare_at_price":100500,"compare_at_price_min":100500,"compare_at_price_max":100500,"compare_at_price_varies":false,"variants":[{"id":37591129948342,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMRAD-E90-07","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Performance Aluminium Radiator - BMW - 3 Series 335i E90(335i)('07) (MT)","public_title":null,"options":["Default Title"],"price":80150,"weight":11802,"compare_at_price":100500,"inventory_quantity":17,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMRAD-E90-07.jpg?v=1710194605"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMRAD-E90-07.jpg?v=1710194605","options":["Title"],"media":[{"alt":"Mishimoto - Performance Aluminium Radiator - BMW - 3 Series 335i E90(335i)('07) (MT) - MMRAD-E90-07 - RZCREWGARAGE","id":25382049087670,"position":1,"preview_image":{"aspect_ratio":1.0,"height":700,"width":700,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMRAD-E90-07.jpg?v=1710194605"},"aspect_ratio":1.0,"height":700,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMRAD-E90-07.jpg?v=1710194605","width":700}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMRAD-E90-07\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003eThe E90 BMW is a great platform for soaking up highway miles during the weekday and taking to the track on the weekend. Aggressive driving results in increased engine temperatures necessitating an effective solution for keeping your straight six cool. Mishimoto has the perfect upgrade, the BMW 335i\/335xi\/135i Performance Aluminum Radiator, to eliminate rising temperatures. The Mishimoto 335i\/335xi\/135i radiator features all-aluminum construction with TIG-welded end tanks to a 100% brazed aluminum core and CNC-machined quick-disconnect inlet and outlet connections. This radiator is constructed from high-quality aircraft aluminum with a brushed finish for the perfect combination of performance and style. The Mishimoto 335i\/335xi\/135i radiator is precision engineered for flawless drop-in fitment while providing a 35% increase in coolant capacity. This radiator also includes a Mishimoto Magnetic Drain Plug with dowty seal, which removes circulating metal fragments from the cooling system, providing further engine protection. As with all our products, this radiator includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship. Say goodbye to the days of broken stock plastic inlet and outlet connections! \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e3 Series 335i | E90 | 2007-2010 | TC | N54B30 | I6\u003cbr\u003e\u003cbr\u003eNote: MT Only!\u003c!--split--\u003eMT Only!"}

{"id":6097365729462,"title":"Mishimoto - Performance Aluminium Radiator - BMW - 1 Series 135i E88(135i) (MT)","handle":"mishimoto-performance-aluminium-radiator-bmw-1-series-135i-e88135i-mt-mmrad-e90-07","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMRAD-E90-07\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003eThe E90 BMW is a great platform for soaking up highway miles during the weekday and taking to the track on the weekend. Aggressive driving results in increased engine temperatures necessitating an effective solution for keeping your straight six cool. Mishimoto has the perfect upgrade, the BMW 335i\/335xi\/135i Performance Aluminum Radiator, to eliminate rising temperatures. The Mishimoto 335i\/335xi\/135i radiator features all-aluminum construction with TIG-welded end tanks to a 100% brazed aluminum core and CNC-machined quick-disconnect inlet and outlet connections. This radiator is constructed from high-quality aircraft aluminum with a brushed finish for the perfect combination of performance and style. The Mishimoto 335i\/335xi\/135i radiator is precision engineered for flawless drop-in fitment while providing a 35% increase in coolant capacity. This radiator also includes a Mishimoto Magnetic Drain Plug with dowty seal, which removes circulating metal fragments from the cooling system, providing further engine protection. As with all our products, this radiator includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship. Say goodbye to the days of broken stock plastic inlet and outlet connections! \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e1 Series 135i | E88 | 2007-2010 | TC | N54B30 | I6\u003cbr\u003e\u003cbr\u003eNote: MT Only!\u003c!--split--\u003eMT Only!","published_at":"2020-11-22T14:40:31+08:00","created_at":"2020-11-22T14:40:32+08:00","vendor":"Mishimoto","type":"Radiators","tags":["1-series-135i-e88-2007-2010-tc-n54b30-i6","2007","2008","2009","2010","bmw","cooling","mishimoto","mt","radiators","us1","ws127"],"price":80150,"price_min":80150,"price_max":80150,"available":true,"price_varies":false,"compare_at_price":100500,"compare_at_price_min":100500,"compare_at_price_max":100500,"compare_at_price_varies":false,"variants":[{"id":37591130013878,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMRAD-E90-07","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Performance Aluminium Radiator - BMW - 1 Series 135i E88(135i) (MT)","public_title":null,"options":["Default Title"],"price":80150,"weight":11802,"compare_at_price":100500,"inventory_quantity":17,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMRAD-E90-07_e9676b48-25eb-420d-9bdd-57c3be0a6955.jpg?v=1710194605"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMRAD-E90-07_e9676b48-25eb-420d-9bdd-57c3be0a6955.jpg?v=1710194605","options":["Title"],"media":[{"alt":"Mishimoto - Performance Aluminium Radiator - BMW - 1 Series 135i E88(135i) (MT) - MMRAD-E90-07 - RZCREWGARAGE","id":25382050201782,"position":1,"preview_image":{"aspect_ratio":1.0,"height":700,"width":700,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMRAD-E90-07_e9676b48-25eb-420d-9bdd-57c3be0a6955.jpg?v=1710194605"},"aspect_ratio":1.0,"height":700,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMRAD-E90-07_e9676b48-25eb-420d-9bdd-57c3be0a6955.jpg?v=1710194605","width":700}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMRAD-E90-07\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003eThe E90 BMW is a great platform for soaking up highway miles during the weekday and taking to the track on the weekend. Aggressive driving results in increased engine temperatures necessitating an effective solution for keeping your straight six cool. Mishimoto has the perfect upgrade, the BMW 335i\/335xi\/135i Performance Aluminum Radiator, to eliminate rising temperatures. The Mishimoto 335i\/335xi\/135i radiator features all-aluminum construction with TIG-welded end tanks to a 100% brazed aluminum core and CNC-machined quick-disconnect inlet and outlet connections. This radiator is constructed from high-quality aircraft aluminum with a brushed finish for the perfect combination of performance and style. The Mishimoto 335i\/335xi\/135i radiator is precision engineered for flawless drop-in fitment while providing a 35% increase in coolant capacity. This radiator also includes a Mishimoto Magnetic Drain Plug with dowty seal, which removes circulating metal fragments from the cooling system, providing further engine protection. As with all our products, this radiator includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship. Say goodbye to the days of broken stock plastic inlet and outlet connections! \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e1 Series 135i | E88 | 2007-2010 | TC | N54B30 | I6\u003cbr\u003e\u003cbr\u003eNote: MT Only!\u003c!--split--\u003eMT Only!"}

{"id":561986076699,"title":"Mishimoto - Honda S2000 Oil Cooler Kit - AP1 AP2 - MMOC-S2K-00","handle":"mishimoto-honda-s2000-oil-cooler-kit-ap1-ap2-mmoc-s2k-00","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-S2K-00\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDramatic temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Honda S2000\u003cbr\u003eThermostatic option available\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote AP1 S2000 (2000–2003) vehicles will require minor bending of A\/C lines for cooler and bracket installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes F20C, F22C\u003cbr\u003eChassis Codes AP1 ,AP2\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets (Including Horn Relocation Bracket)\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 8in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system. Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000. This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability. It includes preassembled stainless steel lines and S2000 specific mounting brackets for a painless and clean installation. The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDramatic temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Honda S2000\u003cbr\u003eThermostatic option available\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote AP1 S2000 (2000–2003) vehicles will require minor bending of A\/C lines for cooler and bracket installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes F20C, F22C\u003cbr\u003eChassis Codes AP1 ,AP2\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets (Including Horn Relocation Bracket)\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 8in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system. Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000. This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability. It includes preassembled stainless steel lines and S2000 specific mounting brackets for a painless and clean installation. The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 4 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:03+08:00","created_at":"2018-01-24T23:24:04+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","car-specific","cooling","honda","mishimoto","oil-cooler-kits","oil-coolers","s2000-ap1-1999-2003-na-f20c-i4","s2000-ap2-2003-2009-na-f22c-i4","us1","ws112"],"price":82000,"price_min":82000,"price_max":82000,"available":true,"price_varies":false,"compare_at_price":83200,"compare_at_price_min":83200,"compare_at_price_max":83200,"compare_at_price_varies":false,"variants":[{"id":5990381813787,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-S2K-00","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Honda S2000 Oil Cooler Kit - AP1 AP2 - MMOC-S2K-00","public_title":null,"options":["Default Title"],"price":82000,"weight":8899,"compare_at_price":83200,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-S2K-00.jpg?v=1710154068"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-S2K-00.jpg?v=1710154068","options":["Title"],"media":[{"alt":"Mishimoto - Honda S2000 Oil Cooler Kit - AP1 AP2 - MMOC-S2K-00 - Rzcrewgarage","id":1351399309409,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-S2K-00.jpg?v=1710154068"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-S2K-00.jpg?v=1710154068","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-S2K-00\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDramatic temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Honda S2000\u003cbr\u003eThermostatic option available\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote AP1 S2000 (2000–2003) vehicles will require minor bending of A\/C lines for cooler and bracket installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes F20C, F22C\u003cbr\u003eChassis Codes AP1 ,AP2\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets (Including Horn Relocation Bracket)\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 8in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system. Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000. This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability. It includes preassembled stainless steel lines and S2000 specific mounting brackets for a painless and clean installation. The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDramatic temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Honda S2000\u003cbr\u003eThermostatic option available\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote AP1 S2000 (2000–2003) vehicles will require minor bending of A\/C lines for cooler and bracket installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes F20C, F22C\u003cbr\u003eChassis Codes AP1 ,AP2\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets (Including Horn Relocation Bracket)\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 8in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system. Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000. This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability. It includes preassembled stainless steel lines and S2000 specific mounting brackets for a painless and clean installation. The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 4 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561986109467,"title":"Mishimoto - Honda S2000 Oil Cooler Kit, Black - Black - AP1 AP2 - MMOC-S2K-00BK","handle":"mishimoto-honda-s2000-oil-cooler-kit-black-black-ap1-ap2-mmoc-s2k-00bk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-S2K-00BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDramatic temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Honda S2000\u003cbr\u003eThermostatic option available\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote AP1 S2000 (2000–2003) vehicles will require minor bending of A\/C lines for cooler and bracket installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes F20C, F22C\u003cbr\u003eChassis Codes AP1 ,AP2\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets (Including Horn Relocation Bracket)\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 8in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system. Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000. This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability. It includes preassembled stainless steel lines and S2000 specific mounting brackets for a painless and clean installation. The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDramatic temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Honda S2000\u003cbr\u003eThermostatic option available\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote AP1 S2000 (2000–2003) vehicles will require minor bending of A\/C lines for cooler and bracket installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes F20C, F22C\u003cbr\u003eChassis Codes AP1 ,AP2\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets (Including Horn Relocation Bracket)\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 8in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system. Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000. This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability. It includes preassembled stainless steel lines and S2000 specific mounting brackets for a painless and clean installation. The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:04+08:00","created_at":"2018-01-24T23:24:05+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","car-specific","cooling","honda","mishimoto","oil-cooler-kits","oil-coolers","s2000-ap1-1999-2003-na-f20c-i4","s2000-ap2-2003-2009-na-f22c-i4","us1","ws112"],"price":82000,"price_min":82000,"price_max":82000,"available":true,"price_varies":false,"compare_at_price":83200,"compare_at_price_min":83200,"compare_at_price_max":83200,"compare_at_price_varies":false,"variants":[{"id":5990382764059,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-S2K-00BK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Honda S2000 Oil Cooler Kit, Black - Black - AP1 AP2 - MMOC-S2K-00BK","public_title":null,"options":["Default Title"],"price":82000,"weight":8944,"compare_at_price":83200,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-S2K-00BK.jpg?v=1710154068"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-S2K-00BK.jpg?v=1710154068","options":["Title"],"media":[{"alt":"Mishimoto - Honda S2000 Oil Cooler Kit, Black - Black - AP1 AP2 - MMOC-S2K-00BK - Rzcrewgarage","id":1351399342177,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-S2K-00BK.jpg?v=1710154068"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-S2K-00BK.jpg?v=1710154068","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-S2K-00BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDramatic temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Honda S2000\u003cbr\u003eThermostatic option available\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote AP1 S2000 (2000–2003) vehicles will require minor bending of A\/C lines for cooler and bracket installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes F20C, F22C\u003cbr\u003eChassis Codes AP1 ,AP2\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets (Including Horn Relocation Bracket)\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 8in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system. Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000. This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability. It includes preassembled stainless steel lines and S2000 specific mounting brackets for a painless and clean installation. The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDramatic temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Honda S2000\u003cbr\u003eThermostatic option available\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote AP1 S2000 (2000–2003) vehicles will require minor bending of A\/C lines for cooler and bracket installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes F20C, F22C\u003cbr\u003eChassis Codes AP1 ,AP2\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets (Including Horn Relocation Bracket)\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 8in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system. Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000. This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability. It includes preassembled stainless steel lines and S2000 specific mounting brackets for a painless and clean installation. The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561986207771,"title":"Mishimoto - Subaru WRX STI Oil Cooler Kit - GRB GVB GRF GVF - MMOC-STI-08","handle":"mishimoto-subaru-wrx-sti-oil-cooler-kit-grb-gvb-grf-gvf-mmoc-sti-08","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-STI-08\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 5 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:07+08:00","created_at":"2018-01-24T23:24:07+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2007","2008","2009","2010","2011","2012","2013","2014","car-specific","cooling","impreza-wrx-sti-a-line-grf-applied-b-2009-2009-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-c-2007-2012-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-c-2010-2012-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-grb-applied-a-2007-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-b-2009-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-c-2010-2012-tc-ej207-h4","impreza-wrx-sti-grb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-grb-applied-e-2013-2014-tc-ej207-h4","impreza-wrx-sti-gvb-applied-c-2007-2012-tc-ej207-h4","impreza-wrx-sti-gvb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-gvb-applied-e-2013-2014-tc-ej207-h4","mishimoto","oil-cooler-kits","oil-coolers","subaru","us1","ws112"],"price":82000,"price_min":82000,"price_max":82000,"available":true,"price_varies":false,"compare_at_price":83200,"compare_at_price_min":83200,"compare_at_price_max":83200,"compare_at_price_varies":false,"variants":[{"id":5990382862363,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-STI-08","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX STI Oil Cooler Kit - GRB GVB GRF GVF - MMOC-STI-08","public_title":null,"options":["Default Title"],"price":82000,"weight":8990,"compare_at_price":83200,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08.jpg?v=1710154075"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08.jpg?v=1710154075","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX STI Oil Cooler Kit - GRB GVB GRF GVF - MMOC-STI-08 - Rzcrewgarage","id":1351399440481,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08.jpg?v=1710154075"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08.jpg?v=1710154075","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-STI-08\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 5 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561986240539,"title":"Mishimoto - Subaru WRX STI Oil Cooler Kit, Black - Black - GRB GVB GRF GVF - MMOC-STI-08BK","handle":"mishimoto-subaru-wrx-sti-oil-cooler-kit-black-black-grb-gvb-grf-gvf-mmoc-sti-08bk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-STI-08BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:08+08:00","created_at":"2018-01-24T23:24:08+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2007","2008","2009","2010","2011","2012","2013","2014","car-specific","cooling","impreza-wrx-sti-a-line-grf-applied-b-2009-2009-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-c-2007-2012-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-c-2010-2012-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-grb-applied-a-2007-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-b-2009-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-c-2010-2012-tc-ej207-h4","impreza-wrx-sti-grb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-grb-applied-e-2013-2014-tc-ej207-h4","impreza-wrx-sti-gvb-applied-c-2007-2012-tc-ej207-h4","impreza-wrx-sti-gvb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-gvb-applied-e-2013-2014-tc-ej207-h4","mishimoto","oil-cooler-kits","oil-coolers","subaru","us1","ws112"],"price":82000,"price_min":82000,"price_max":82000,"available":true,"price_varies":false,"compare_at_price":83200,"compare_at_price_min":83200,"compare_at_price_max":83200,"compare_at_price_varies":false,"variants":[{"id":5990382895131,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-STI-08BK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX STI Oil Cooler Kit, Black - Black - GRB GVB GRF GVF - MMOC-STI-08BK","public_title":null,"options":["Default Title"],"price":82000,"weight":8853,"compare_at_price":83200,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08BK.jpg?v=1710154075"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08BK.jpg?v=1710154075","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX STI Oil Cooler Kit, Black - Black - GRB GVB GRF GVF - MMOC-STI-08BK - Rzcrewgarage","id":1351399571553,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08BK.jpg?v=1710154075"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08BK.jpg?v=1710154075","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-STI-08BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561984274459,"title":"Mishimoto - Nissan 350Z Oil Cooler Kit - Z33 - MMOC-350Z-03","handle":"mishimoto-nissan-350z-oil-cooler-kit-z33-mmoc-350z-03","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-350Z-03\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2003–2009 Nissan 350Z and 2003–2007 G35 coupe\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eReduces oil temperatures by 25+°F (14+°C)\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote This oil cooler kit does not fit NISMO models.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes VQ35DE, VQ35HR\u003cbr\u003eChassis Codes Z33, V35\u003cbr\u003ePressure Drop 2-3 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003eTemp Difference 25°F\u003cbr\u003eOverall Height 12.95\" \u003cbr\u003eOverall Length 6.44\" \u003cbr\u003eOverall Width 1.97\" \u003cbr\u003eCore Size 11.0\" x 5.43\"\u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate M20 (Thermostatic Plate as Option in Drop Down)\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new Nissan 350Z \/ Infiniti G35 Coupe Oil Cooler Kit. Specially designed for your Nissan 350Z and Infiniti G35, the Mishimoto oil cooler is a direct fit and works with both manual and automatic applications. Proven to reduce engine oil temperatures 25 degrees, this oil cooler kit is a must have for your 350Z or G35. The Mishimoto 350Z \/ G35 oil cooler kit is available with an optional thermostatic sandwich plate for safe daily-driver warm up and additional operating temperature control.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2003–2009 Nissan 350Z and 2003–2007 G35 coupe\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eReduces oil temperatures by 25+°F (14+°C)\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote This oil cooler kit does not fit NISMO models.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes VQ35DE, VQ35HR\u003cbr\u003eChassis Codes Z33, V35\u003cbr\u003ePressure Drop 2-3 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003eTemp Difference 25°F\u003cbr\u003eOverall Height 12.95\" \u003cbr\u003eOverall Length 6.44\" \u003cbr\u003eOverall Width 1.97\" \u003cbr\u003eCore Size 11.0\" x 5.43\"\u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate M20 (Thermostatic Plate as Option in Drop Down)\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new Nissan 350Z \/ Infiniti G35 Coupe Oil Cooler Kit. Specially designed for your Nissan 350Z and Infiniti G35, the Mishimoto oil cooler is a direct fit and works with both manual and automatic applications. Proven to reduce engine oil temperatures 25 degrees, this oil cooler kit is a must have for your 350Z or G35. The Mishimoto 350Z \/ G35 oil cooler kit is available with an optional thermostatic sandwich plate for safe daily-driver warm up and additional operating temperature control.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:23:43+08:00","created_at":"2018-01-24T23:23:43+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2002","2003","2004","2005","2006","2007","2008","car-specific","cooling","fairlady-z-z33-chuki-2004-2005-na-vq35de-v6","fairlady-z-z33-kouki-2007-2008-na-vq35hr-v6","fairlady-z-z33-zenki-2002-2004-na-vq35de-v6","mishimoto","nissan","oil-cooler-kits","oil-coolers","us1","ws112"],"price":82060,"price_min":82060,"price_max":82060,"available":true,"price_varies":false,"compare_at_price":83200,"compare_at_price_min":83200,"compare_at_price_max":83200,"compare_at_price_varies":false,"variants":[{"id":5990379913243,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-350Z-03","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Nissan 350Z Oil Cooler Kit - Z33 - MMOC-350Z-03","public_title":null,"options":["Default Title"],"price":82060,"weight":9488,"compare_at_price":83200,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-350Z-03.jpg?v=1710154058"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-350Z-03.jpg?v=1710154058","options":["Title"],"media":[{"alt":"Mishimoto - Nissan 350Z Oil Cooler Kit - Z33 - MMOC-350Z-03 - Rzcrewgarage","id":1351398490209,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-350Z-03.jpg?v=1710154058"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-350Z-03.jpg?v=1710154058","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-350Z-03\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2003–2009 Nissan 350Z and 2003–2007 G35 coupe\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eReduces oil temperatures by 25+°F (14+°C)\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote This oil cooler kit does not fit NISMO models.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes VQ35DE, VQ35HR\u003cbr\u003eChassis Codes Z33, V35\u003cbr\u003ePressure Drop 2-3 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003eTemp Difference 25°F\u003cbr\u003eOverall Height 12.95\" \u003cbr\u003eOverall Length 6.44\" \u003cbr\u003eOverall Width 1.97\" \u003cbr\u003eCore Size 11.0\" x 5.43\"\u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate M20 (Thermostatic Plate as Option in Drop Down)\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new Nissan 350Z \/ Infiniti G35 Coupe Oil Cooler Kit. Specially designed for your Nissan 350Z and Infiniti G35, the Mishimoto oil cooler is a direct fit and works with both manual and automatic applications. Proven to reduce engine oil temperatures 25 degrees, this oil cooler kit is a must have for your 350Z or G35. The Mishimoto 350Z \/ G35 oil cooler kit is available with an optional thermostatic sandwich plate for safe daily-driver warm up and additional operating temperature control.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2003–2009 Nissan 350Z and 2003–2007 G35 coupe\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eReduces oil temperatures by 25+°F (14+°C)\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote This oil cooler kit does not fit NISMO models.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes VQ35DE, VQ35HR\u003cbr\u003eChassis Codes Z33, V35\u003cbr\u003ePressure Drop 2-3 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003eTemp Difference 25°F\u003cbr\u003eOverall Height 12.95\" \u003cbr\u003eOverall Length 6.44\" \u003cbr\u003eOverall Width 1.97\" \u003cbr\u003eCore Size 11.0\" x 5.43\"\u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate M20 (Thermostatic Plate as Option in Drop Down)\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new Nissan 350Z \/ Infiniti G35 Coupe Oil Cooler Kit. Specially designed for your Nissan 350Z and Infiniti G35, the Mishimoto oil cooler is a direct fit and works with both manual and automatic applications. Proven to reduce engine oil temperatures 25 degrees, this oil cooler kit is a must have for your 350Z or G35. The Mishimoto 350Z \/ G35 oil cooler kit is available with an optional thermostatic sandwich plate for safe daily-driver warm up and additional operating temperature control.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}