Cooling

{"id":561985945627,"title":"Mishimoto - Mitsubishi Lancer Evolution X Oil Cooler Kit, Black - Black - CZ4A - MMOC-EVO-08BK","handle":"mishimoto-mitsubishi-lancer-evolution-x-oil-cooler-kit-black-black-cz4a-mmoc-evo-08bk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-EVO-08BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect-fit application designed specifically for the Mitsubishi Lancer Evolution X\u003cbr\u003eIncludes two 19-row oil coolers run in series for optimum cooling\u003cbr\u003eSpecial engineered mounting brackets also serve as ducting to channel air to coolers\u003cbr\u003eAdapts to thermostatically controlled stock oil housing\u003cbr\u003ePrevents car from going into limp mode under aggressive street or track conditions\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 4B11T\u003cbr\u003eChassis Codes CZ4A\u003cbr\u003ePressure Drop 0 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.8 qt\u003cbr\u003eTemp Difference 10°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets\u003cbr\u003e(2) 19 Row Oil Cooler\u003cbr\u003e(1) 2ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 2ft 1.5in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(2) 90° -10AN Female to Male Swivel Adapter\u003cbr\u003e(1) Straight -10AN Female to Female Adapter\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M18 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new 08+ Mitsubishi Evolution X Oil Cooler Kit. Specially designed for your Evo X, this kit features V-mounted dual oil coolers mounted behind the passenger side foglight with a splitter designed for optimal airflow. The Mishimoto Evolution X Oil Cooler Kit maintains optimum oil temperatures without any drop in pressure and comes with the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect-fit application designed specifically for the Mitsubishi Lancer Evolution X\u003cbr\u003eIncludes two 19-row oil coolers run in series for optimum cooling\u003cbr\u003eSpecial engineered mounting brackets also serve as ducting to channel air to coolers\u003cbr\u003eAdapts to thermostatically controlled stock oil housing\u003cbr\u003ePrevents car from going into limp mode under aggressive street or track conditions\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 4B11T\u003cbr\u003eChassis Codes CZ4A\u003cbr\u003ePressure Drop 0 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.8 qt\u003cbr\u003eTemp Difference 10°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets\u003cbr\u003e(2) 19 Row Oil Cooler\u003cbr\u003e(1) 2ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 2ft 1.5in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(2) 90° -10AN Female to Male Swivel Adapter\u003cbr\u003e(1) Straight -10AN Female to Female Adapter\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M18 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new 08+ Mitsubishi Evolution X Oil Cooler Kit. Specially designed for your Evo X, this kit features V-mounted dual oil coolers mounted behind the passenger side foglight with a splitter designed for optimal airflow. The Mishimoto Evolution X Oil Cooler Kit maintains optimum oil temperatures without any drop in pressure and comes with the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 4 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2025-04-14T11:29:26+08:00","created_at":"2018-01-24T23:24:01+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","car-specific","cooling","lancer-evolution-x-cz4a-chuki-gsr-jdmmr-2008-2009-tc-4b11-i4","lancer-evolution-x-cz4a-chuki-rs-jdmgsr-2008-2009-tc-4b11-i4","lancer-evolution-x-cz4a-kouki-gsr-jdmmr-2009-2017-tc-4b11-i4","lancer-evolution-x-cz4a-kouki-rs-jdmgsr-2009-2017-tc-4b11-i4","lancer-evolution-x-cz4a-zenki-gsr-jdmmr-2007-2008-tc-4b11-i4","lancer-evolution-x-cz4a-zenki-rs-jdmgsr-2007-2008-tc-4b11-i4","lancer-evolution-x-cz4agsr-jdmmr-2007-2017-tc-4b11-i4","lancer-evolution-x-cz4ars-jdmgsr-2007-2017-tc-4b11-i4","mishimoto","mitsubishi","oil-cooler-kits","oil-coolers","US1","ws111"],"price":105840,"price_min":105840,"price_max":105840,"available":true,"price_varies":false,"compare_at_price":105900,"compare_at_price_min":105900,"compare_at_price_max":105900,"compare_at_price_varies":false,"variants":[{"id":5990381649947,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-EVO-08BK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Mitsubishi Lancer Evolution X Oil Cooler Kit, Black - Black - CZ4A - MMOC-EVO-08BK","public_title":null,"options":["Default Title"],"price":105840,"weight":12482,"compare_at_price":105900,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-EVO-08BK.jpg?v=1710154066"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-EVO-08BK.jpg?v=1710154066","options":["Title"],"media":[{"alt":"Mishimoto - Mitsubishi Lancer Evolution X Oil Cooler Kit, Black - Black - CZ4A - MMOC-EVO-08BK - Rzcrewgarage","id":1351399211105,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-EVO-08BK.jpg?v=1710154066"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-EVO-08BK.jpg?v=1710154066","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-EVO-08BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect-fit application designed specifically for the Mitsubishi Lancer Evolution X\u003cbr\u003eIncludes two 19-row oil coolers run in series for optimum cooling\u003cbr\u003eSpecial engineered mounting brackets also serve as ducting to channel air to coolers\u003cbr\u003eAdapts to thermostatically controlled stock oil housing\u003cbr\u003ePrevents car from going into limp mode under aggressive street or track conditions\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 4B11T\u003cbr\u003eChassis Codes CZ4A\u003cbr\u003ePressure Drop 0 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.8 qt\u003cbr\u003eTemp Difference 10°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets\u003cbr\u003e(2) 19 Row Oil Cooler\u003cbr\u003e(1) 2ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 2ft 1.5in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(2) 90° -10AN Female to Male Swivel Adapter\u003cbr\u003e(1) Straight -10AN Female to Female Adapter\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M18 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new 08+ Mitsubishi Evolution X Oil Cooler Kit. Specially designed for your Evo X, this kit features V-mounted dual oil coolers mounted behind the passenger side foglight with a splitter designed for optimal airflow. The Mishimoto Evolution X Oil Cooler Kit maintains optimum oil temperatures without any drop in pressure and comes with the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect-fit application designed specifically for the Mitsubishi Lancer Evolution X\u003cbr\u003eIncludes two 19-row oil coolers run in series for optimum cooling\u003cbr\u003eSpecial engineered mounting brackets also serve as ducting to channel air to coolers\u003cbr\u003eAdapts to thermostatically controlled stock oil housing\u003cbr\u003ePrevents car from going into limp mode under aggressive street or track conditions\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 4B11T\u003cbr\u003eChassis Codes CZ4A\u003cbr\u003ePressure Drop 0 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.8 qt\u003cbr\u003eTemp Difference 10°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets\u003cbr\u003e(2) 19 Row Oil Cooler\u003cbr\u003e(1) 2ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 2ft 1.5in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(2) 90° -10AN Female to Male Swivel Adapter\u003cbr\u003e(1) Straight -10AN Female to Female Adapter\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M18 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new 08+ Mitsubishi Evolution X Oil Cooler Kit. Specially designed for your Evo X, this kit features V-mounted dual oil coolers mounted behind the passenger side foglight with a splitter designed for optimal airflow. The Mishimoto Evolution X Oil Cooler Kit maintains optimum oil temperatures without any drop in pressure and comes with the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 4 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561985978395,"title":"Mishimoto - Mazda Miata Oil Cooler Kit - ND - MMOC-MIA-16","handle":"mishimoto-mazda-miata-oil-cooler-kit-nd-mmoc-mia-16","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-MIA-16\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect-fit for the 2016+ Mazda MX-5 Miata\u003cbr\u003e19-row stacked-plate oil cooler drops temperatures up to 57°F (29.5°C)\u003cbr\u003eMinimal pressure drop\u003cbr\u003eApplication-specific mounting brackets mount the oil cooler in the front bumper\u003cbr\u003eMounting brackets made from aluminum for a lightweight design\u003cbr\u003ePre-made stainless steel braided oil lines with durable -AN fittings\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate\u003cbr\u003eThermostatic and Non-thermostatic options available\u003cbr\u003eCooler available in either Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by .75 qt\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eChassis Codes ND\u003cbr\u003ePressure Drop 3-5 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 57°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets w\/ Corrosion Resistant Mounting Hardware\u003cbr\u003e(1) 19 Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 3', 9\" Stainless Steel Braided Hose with Straight and 45 \/ 120 Degree -10AN Fittings\u003cbr\u003e(1) 4', 7\" Stainless Steel Braided Hose with 45 Degree and 45 \/ 120 Degree -10AN Fittings\u003cbr\u003e(1) Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Extended Length Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(1) 10mm 6061 Aluminum Sandwich Plate Spacer\u003cbr\u003e(2) O-rings\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWith the release of the new 2016 Mazda Miata, the Mishimoto engineers are excited to help increase cooling efficiency. We all know that these fresh-off-the-production-line Miatas will find their way to track, so Mishimoto developed a direct-fit Miata oil cooler kit to keep oil temperatures in check. Mishimoto’s Miata oil cooler makes sure that your oil stays at optimal temperatures, while your Miata is making leading laps around the track. Unfortunately, the new 2016 Miata was not equipped with a stock oil cooler, making the addition of an oil cooler an important modification. \u003cbr\u003e\u003cbr\u003eThis Miata oil cooler kit features a Mishimoto 19-row stacked-plate oil cooler, which is placed directly in front of the radiator by application-specific mounting brackets for maximum air-flow. Application-specific braided stainless steel lines transfer oil from the cooler to the engine and feature -10AN fittings for an easy installation. Mishimoto engineers saw consistent temperature decreases of up to 57°F (29.5°C) using our non-thermostatic sandwich plate. \u003cbr\u003e\u003cbr\u003eThe cooler is available in a Sleek Silver or Stealth Black powdercoat finish with the choice of either the Mishimoto Thermostatic Oil Sandwich Plate or the Mishimoto Non-thermostatic Oil Sandwich Plate. As with the rest of the Mishimoto 2016 Miata parts, this oil cooler kit comes with the Mishimoto Lifetime Warranty!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect-fit for the 2016+ Mazda MX-5 Miata\u003cbr\u003e19-row stacked-plate oil cooler drops temperatures up to 57°F (29.5°C)\u003cbr\u003eMinimal pressure drop\u003cbr\u003eApplication-specific mounting brackets mount the oil cooler in the front bumper\u003cbr\u003eMounting brackets made from aluminum for a lightweight design\u003cbr\u003ePre-made stainless steel braided oil lines with durable -AN fittings\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate\u003cbr\u003eThermostatic and Non-thermostatic options available\u003cbr\u003eCooler available in either Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by .75 qt\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eChassis Codes ND\u003cbr\u003ePressure Drop 3-5 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 57°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets w\/ Corrosion Resistant Mounting Hardware\u003cbr\u003e(1) 19 Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 3', 9\" Stainless Steel Braided Hose with Straight and 45 \/ 120 Degree -10AN Fittings\u003cbr\u003e(1) 4', 7\" Stainless Steel Braided Hose with 45 Degree and 45 \/ 120 Degree -10AN Fittings\u003cbr\u003e(1) Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Extended Length Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(1) 10mm 6061 Aluminum Sandwich Plate Spacer\u003cbr\u003e(2) O-rings\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWith the release of the new 2016 Mazda Miata, the Mishimoto engineers are excited to help increase cooling efficiency. We all know that these fresh-off-the-production-line Miatas will find their way to track, so Mishimoto developed a direct-fit Miata oil cooler kit to keep oil temperatures in check. Mishimoto’s Miata oil cooler makes sure that your oil stays at optimal temperatures, while your Miata is making leading laps around the track. Unfortunately, the new 2016 Miata was not equipped with a stock oil cooler, making the addition of an oil cooler an important modification. \u003cbr\u003e\u003cbr\u003eThis Miata oil cooler kit features a Mishimoto 19-row stacked-plate oil cooler, which is placed directly in front of the radiator by application-specific mounting brackets for maximum air-flow. Application-specific braided stainless steel lines transfer oil from the cooler to the engine and feature -10AN fittings for an easy installation. Mishimoto engineers saw consistent temperature decreases of up to 57°F (29.5°C) using our non-thermostatic sandwich plate. \u003cbr\u003e\u003cbr\u003eThe cooler is available in a Sleek Silver or Stealth Black powdercoat finish with the choice of either the Mishimoto Thermostatic Oil Sandwich Plate or the Mishimoto Non-thermostatic Oil Sandwich Plate. As with the rest of the Mishimoto 2016 Miata parts, this oil cooler kit comes with the Mishimoto Lifetime Warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2025-04-14T11:29:11+08:00","created_at":"2018-01-24T23:24:02+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2015","2016","2017","2018","car-specific","cooling","mazda","mishimoto","mx-5-miata-roadster-nd5rc-2015-2018-na-p5-vp-rs-i4","mx-5-miata-roadster-rf-nderc-2016-2018-na-pe-vpr-rs-i4","oil-cooler-kits","oil-coolers","US1","ws111"],"price":105840,"price_min":105840,"price_max":105840,"available":false,"price_varies":false,"compare_at_price":105900,"compare_at_price_min":105900,"compare_at_price_max":105900,"compare_at_price_varies":false,"variants":[{"id":5990381682715,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-MIA-16","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Mishimoto - Mazda Miata Oil Cooler Kit - ND - MMOC-MIA-16","public_title":null,"options":["Default Title"],"price":105840,"weight":10000,"compare_at_price":105900,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-MIA-16.jpg?v=1710154068"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-MIA-16.jpg?v=1710154068","options":["Title"],"media":[{"alt":"Mishimoto - Mazda Miata Oil Cooler Kit - ND - MMOC-MIA-16 - Rzcrewgarage","id":1351399243873,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-MIA-16.jpg?v=1710154068"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-MIA-16.jpg?v=1710154068","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-MIA-16\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect-fit for the 2016+ Mazda MX-5 Miata\u003cbr\u003e19-row stacked-plate oil cooler drops temperatures up to 57°F (29.5°C)\u003cbr\u003eMinimal pressure drop\u003cbr\u003eApplication-specific mounting brackets mount the oil cooler in the front bumper\u003cbr\u003eMounting brackets made from aluminum for a lightweight design\u003cbr\u003ePre-made stainless steel braided oil lines with durable -AN fittings\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate\u003cbr\u003eThermostatic and Non-thermostatic options available\u003cbr\u003eCooler available in either Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by .75 qt\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eChassis Codes ND\u003cbr\u003ePressure Drop 3-5 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 57°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets w\/ Corrosion Resistant Mounting Hardware\u003cbr\u003e(1) 19 Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 3', 9\" Stainless Steel Braided Hose with Straight and 45 \/ 120 Degree -10AN Fittings\u003cbr\u003e(1) 4', 7\" Stainless Steel Braided Hose with 45 Degree and 45 \/ 120 Degree -10AN Fittings\u003cbr\u003e(1) Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Extended Length Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(1) 10mm 6061 Aluminum Sandwich Plate Spacer\u003cbr\u003e(2) O-rings\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWith the release of the new 2016 Mazda Miata, the Mishimoto engineers are excited to help increase cooling efficiency. We all know that these fresh-off-the-production-line Miatas will find their way to track, so Mishimoto developed a direct-fit Miata oil cooler kit to keep oil temperatures in check. Mishimoto’s Miata oil cooler makes sure that your oil stays at optimal temperatures, while your Miata is making leading laps around the track. Unfortunately, the new 2016 Miata was not equipped with a stock oil cooler, making the addition of an oil cooler an important modification. \u003cbr\u003e\u003cbr\u003eThis Miata oil cooler kit features a Mishimoto 19-row stacked-plate oil cooler, which is placed directly in front of the radiator by application-specific mounting brackets for maximum air-flow. Application-specific braided stainless steel lines transfer oil from the cooler to the engine and feature -10AN fittings for an easy installation. Mishimoto engineers saw consistent temperature decreases of up to 57°F (29.5°C) using our non-thermostatic sandwich plate. \u003cbr\u003e\u003cbr\u003eThe cooler is available in a Sleek Silver or Stealth Black powdercoat finish with the choice of either the Mishimoto Thermostatic Oil Sandwich Plate or the Mishimoto Non-thermostatic Oil Sandwich Plate. As with the rest of the Mishimoto 2016 Miata parts, this oil cooler kit comes with the Mishimoto Lifetime Warranty!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect-fit for the 2016+ Mazda MX-5 Miata\u003cbr\u003e19-row stacked-plate oil cooler drops temperatures up to 57°F (29.5°C)\u003cbr\u003eMinimal pressure drop\u003cbr\u003eApplication-specific mounting brackets mount the oil cooler in the front bumper\u003cbr\u003eMounting brackets made from aluminum for a lightweight design\u003cbr\u003ePre-made stainless steel braided oil lines with durable -AN fittings\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate\u003cbr\u003eThermostatic and Non-thermostatic options available\u003cbr\u003eCooler available in either Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by .75 qt\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eChassis Codes ND\u003cbr\u003ePressure Drop 3-5 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 57°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets w\/ Corrosion Resistant Mounting Hardware\u003cbr\u003e(1) 19 Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 3', 9\" Stainless Steel Braided Hose with Straight and 45 \/ 120 Degree -10AN Fittings\u003cbr\u003e(1) 4', 7\" Stainless Steel Braided Hose with 45 Degree and 45 \/ 120 Degree -10AN Fittings\u003cbr\u003e(1) Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Extended Length Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(1) 10mm 6061 Aluminum Sandwich Plate Spacer\u003cbr\u003e(2) O-rings\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWith the release of the new 2016 Mazda Miata, the Mishimoto engineers are excited to help increase cooling efficiency. We all know that these fresh-off-the-production-line Miatas will find their way to track, so Mishimoto developed a direct-fit Miata oil cooler kit to keep oil temperatures in check. Mishimoto’s Miata oil cooler makes sure that your oil stays at optimal temperatures, while your Miata is making leading laps around the track. Unfortunately, the new 2016 Miata was not equipped with a stock oil cooler, making the addition of an oil cooler an important modification. \u003cbr\u003e\u003cbr\u003eThis Miata oil cooler kit features a Mishimoto 19-row stacked-plate oil cooler, which is placed directly in front of the radiator by application-specific mounting brackets for maximum air-flow. Application-specific braided stainless steel lines transfer oil from the cooler to the engine and feature -10AN fittings for an easy installation. Mishimoto engineers saw consistent temperature decreases of up to 57°F (29.5°C) using our non-thermostatic sandwich plate. \u003cbr\u003e\u003cbr\u003eThe cooler is available in a Sleek Silver or Stealth Black powdercoat finish with the choice of either the Mishimoto Thermostatic Oil Sandwich Plate or the Mishimoto Non-thermostatic Oil Sandwich Plate. As with the rest of the Mishimoto 2016 Miata parts, this oil cooler kit comes with the Mishimoto Lifetime Warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":2095439249505,"title":"Skunk 2 - Ultra Series Full Size Radiators with Oil cooler kit Integrated Radiator - Subaru - BRZ ZC6 APPLIED A to E (MT)","handle":"skunk-2-ultra-series-full-size-radiators-with-oil-cooler-kit-integrated-radiator-subaru-brz-zc6-applied-a-to-e-mt-349-12-5005","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Skunk 2\u003cbr\u003ePart Number: 349-12-5005\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003eIntegrated Oil Cooler w\/ Oil Filter Sandwich Adapter, Port Fittings, and Pre-Assembled Oil Lines\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003c!--split--\u003e","published_at":"2025-04-14T11:15:56+08:00","created_at":"2019-04-26T16:12:01+08:00","vendor":"Skunk 2","type":"Radiators","tags":["2012","2013","2014","2015","2016","2017","2018","86-zn6-spec-b-2013-2014-na-4u-gse-h4","86-zn6-spec-c-2014-2015-na-4u-gse-h4","86-zn6-spec-d-2015-2016-na-4u-gse-h4","86-zn6-spec-e-2016-2018-na-4u-gse-h4","cooling","mt","radiators","skunk-2","toyota","US1","ws17"],"price":106050,"price_min":106050,"price_max":106050,"available":true,"price_varies":false,"compare_at_price":106400,"compare_at_price_min":106400,"compare_at_price_max":106400,"compare_at_price_varies":false,"variants":[{"id":19755556077665,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"349-12-5005","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skunk 2 - Ultra Series Full Size Radiators with Oil cooler kit Integrated Radiator - Subaru - BRZ ZC6 APPLIED A to E (MT)","public_title":null,"options":["Default Title"],"price":106050,"weight":15385,"compare_at_price":106400,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/349-12-5005.jpg?v=1710179277"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/349-12-5005.jpg?v=1710179277","options":["Title"],"media":[{"alt":"Skunk 2 - Ultra Series Full Size Radiators with Oil cooler kit Integrated Radiator - Subaru - BRZ ZC6 APPLIED A to E (MT) - 349-12-5005 - RZCREWGARAGE","id":25382031917238,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/349-12-5005.jpg?v=1710179277"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/349-12-5005.jpg?v=1710179277","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Skunk 2\u003cbr\u003ePart Number: 349-12-5005\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003eIntegrated Oil Cooler w\/ Oil Filter Sandwich Adapter, Port Fittings, and Pre-Assembled Oil Lines\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003c!--split--\u003e"}

{"id":2095439446113,"title":"Skunk 2 - Ultra Series Full Size Radiators with Oil cooler kit Integrated Radiator - Toyota - 86 ZN6 (MT)","handle":"skunk-2-ultra-series-full-size-radiators-with-oil-cooler-kit-integrated-radiator-toyota-86-zn6-mt-349-12-5005","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Skunk 2\u003cbr\u003ePart Number: 349-12-5005\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003eIntegrated Oil Cooler w\/ Oil Filter Sandwich Adapter, Port Fittings, and Pre-Assembled Oil Lines\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e86 | ZN6 SPEC A | 2012-2013 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC B | 2013-2014 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC C | 2014-2015 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC D | 2015-2016 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC E | 2016-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e","published_at":"2025-04-14T11:15:56+08:00","created_at":"2019-04-26T16:12:04+08:00","vendor":"Skunk 2","type":"Radiators","tags":["2012","2013","2014","2015","2016","2017","2018","86-zn6-spec-b-2013-2014-na-4u-gse-h4","86-zn6-spec-c-2014-2015-na-4u-gse-h4","86-zn6-spec-d-2015-2016-na-4u-gse-h4","86-zn6-spec-e-2016-2018-na-4u-gse-h4","cooling","mt","radiators","skunk-2","toyota","US1","ws17"],"price":106050,"price_min":106050,"price_max":106050,"available":true,"price_varies":false,"compare_at_price":106400,"compare_at_price_min":106400,"compare_at_price_max":106400,"compare_at_price_varies":false,"variants":[{"id":19755556995169,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"349-12-5005","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skunk 2 - Ultra Series Full Size Radiators with Oil cooler kit Integrated Radiator - Toyota - 86 ZN6 (MT)","public_title":null,"options":["Default Title"],"price":106050,"weight":15385,"compare_at_price":106400,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/349-12-5005_310967ec-771d-495a-8a70-1430a7de0d3c.jpg?v=1710179280"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/349-12-5005_310967ec-771d-495a-8a70-1430a7de0d3c.jpg?v=1710179280","options":["Title"],"media":[{"alt":"Skunk 2 - Ultra Series Full Size Radiators with Oil cooler kit Integrated Radiator - Toyota - 86 ZN6 (MT) - 349-12-5005 - RZCREWGARAGE","id":25382032015542,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/349-12-5005_310967ec-771d-495a-8a70-1430a7de0d3c.jpg?v=1710179280"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/349-12-5005_310967ec-771d-495a-8a70-1430a7de0d3c.jpg?v=1710179280","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Skunk 2\u003cbr\u003ePart Number: 349-12-5005\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003eIntegrated Oil Cooler w\/ Oil Filter Sandwich Adapter, Port Fittings, and Pre-Assembled Oil Lines\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e86 | ZN6 SPEC A | 2012-2013 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC B | 2013-2014 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC C | 2014-2015 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC D | 2015-2016 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC E | 2016-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e"}

{"id":7405813465270,"title":"HKS Oil Cooler Kit Honda Civic Type R FK8","handle":"hks-oil-cooler-kit-honda-civic-type-r-fk8-15004-ah004","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 15004-AH004\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: 9 Rows\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eType: Type S\u003cbr\u003e\nCore Location: Right fender\u003cbr\u003e\nCore Size (mm): 200x122.5x48\u003cbr\u003e\nNum. of Rows: 9\u003cbr\u003e\nHose Size : #10\u003cbr\u003e\nAluminum AirGuide: Included\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic Type R | FK8 | 2017-2018 | TC | K20C1 | I4\u003cbr\u003e\u003cbr\u003eNote: MT Only!\u003c!--split--\u003eMT Only!","published_at":"2022-07-13T15:03:03+08:00","created_at":"2022-07-13T14:57:43+08:00","vendor":"HKS","type":"Radiators","tags":["2017","2018","civic-type-r-fk8-2017-2018-tc-k20c1-i4","cooling","hks","honda","jp1","mt","radiators","ws16"],"price":107300,"price_min":107300,"price_max":107300,"available":true,"price_varies":false,"compare_at_price":106000,"compare_at_price_min":106000,"compare_at_price_max":106000,"compare_at_price_varies":false,"variants":[{"id":41626091225270,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"15004-AH004","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Oil Cooler Kit Honda Civic Type R FK8","public_title":null,"options":["Default Title"],"price":107300,"weight":14000,"compare_at_price":106000,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/hks-oil-cooler-kit-honda-civic-type-r-fk8-rzcrew.png?v=1710320540"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/hks-oil-cooler-kit-honda-civic-type-r-fk8-rzcrew.png?v=1710320540","options":["Title"],"media":[{"alt":"HKS - Oil Cooler Kit - Honda - Civic Type R FK8 - [variant sku] - RZCrewGarage","id":26484362641590,"position":1,"preview_image":{"aspect_ratio":1.545,"height":389,"width":601,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/hks-oil-cooler-kit-honda-civic-type-r-fk8-rzcrew.png?v=1710320540"},"aspect_ratio":1.545,"height":389,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/hks-oil-cooler-kit-honda-civic-type-r-fk8-rzcrew.png?v=1710320540","width":601}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 15004-AH004\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: 9 Rows\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eType: Type S\u003cbr\u003e\nCore Location: Right fender\u003cbr\u003e\nCore Size (mm): 200x122.5x48\u003cbr\u003e\nNum. of Rows: 9\u003cbr\u003e\nHose Size : #10\u003cbr\u003e\nAluminum AirGuide: Included\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic Type R | FK8 | 2017-2018 | TC | K20C1 | I4\u003cbr\u003e\u003cbr\u003eNote: MT Only!\u003c!--split--\u003eMT Only!"}

{"id":561986011163,"title":"Mishimoto - Mazda Miata Oil Cooler Kit - Black - ND - MMOC-MIA-16BK","handle":"mishimoto-mazda-miata-oil-cooler-kit-black-nd-mmoc-mia-16bk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-MIA-16BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect-fit for the 2016+ Mazda MX-5 Miata\u003cbr\u003e19-row stacked-plate oil cooler drops temperatures up to 57°F (29.5°C)\u003cbr\u003eMinimal pressure drop\u003cbr\u003eApplication-specific mounting brackets mount the oil cooler in the front bumper\u003cbr\u003eMounting brackets made from aluminum for a lightweight design\u003cbr\u003ePre-made stainless steel braided oil lines with durable -AN fittings\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate\u003cbr\u003eThermostatic and Non-thermostatic options available\u003cbr\u003eCooler available in either Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by .75 qt\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eChassis Codes ND\u003cbr\u003ePressure Drop 3-5 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 57°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets w\/ Corrosion Resistant Mounting Hardware\u003cbr\u003e(1) 19 Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 3', 9\" Stainless Steel Braided Hose with Straight and 45 \/ 120 Degree -10AN Fittings\u003cbr\u003e(1) 4', 7\" Stainless Steel Braided Hose with 45 Degree and 45 \/ 120 Degree -10AN Fittings\u003cbr\u003e(1) Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Extended Length Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(1) 10mm 6061 Aluminum Sandwich Plate Spacer\u003cbr\u003e(2) O-rings\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWith the release of the new 2016 Mazda Miata, the Mishimoto engineers are excited to help increase cooling efficiency. We all know that these fresh-off-the-production-line Miatas will find their way to track, so Mishimoto developed a direct-fit Miata oil cooler kit to keep oil temperatures in check. Mishimoto’s Miata oil cooler makes sure that your oil stays at optimal temperatures, while your Miata is making leading laps around the track. Unfortunately, the new 2016 Miata was not equipped with a stock oil cooler, making the addition of an oil cooler an important modification. \u003cbr\u003e\u003cbr\u003eThis Miata oil cooler kit features a Mishimoto 19-row stacked-plate oil cooler, which is placed directly in front of the radiator by application-specific mounting brackets for maximum air-flow. Application-specific braided stainless steel lines transfer oil from the cooler to the engine and feature -10AN fittings for an easy installation. Mishimoto engineers saw consistent temperature decreases of up to 57°F (29.5°C) using our non-thermostatic sandwich plate. \u003cbr\u003e\u003cbr\u003eThe cooler is available in a Sleek Silver or Stealth Black powdercoat finish with the choice of either the Mishimoto Thermostatic Oil Sandwich Plate or the Mishimoto Non-thermostatic Oil Sandwich Plate. As with the rest of the Mishimoto 2016 Miata parts, this oil cooler kit comes with the Mishimoto Lifetime Warranty!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect-fit for the 2016+ Mazda MX-5 Miata\u003cbr\u003e19-row stacked-plate oil cooler drops temperatures up to 57°F (29.5°C)\u003cbr\u003eMinimal pressure drop\u003cbr\u003eApplication-specific mounting brackets mount the oil cooler in the front bumper\u003cbr\u003eMounting brackets made from aluminum for a lightweight design\u003cbr\u003ePre-made stainless steel braided oil lines with durable -AN fittings\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate\u003cbr\u003eThermostatic and Non-thermostatic options available\u003cbr\u003eCooler available in either Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by .75 qt\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eChassis Codes ND\u003cbr\u003ePressure Drop 3-5 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 57°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets w\/ Corrosion Resistant Mounting Hardware\u003cbr\u003e(1) 19 Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 3', 9\" Stainless Steel Braided Hose with Straight and 45 \/ 120 Degree -10AN Fittings\u003cbr\u003e(1) 4', 7\" Stainless Steel Braided Hose with 45 Degree and 45 \/ 120 Degree -10AN Fittings\u003cbr\u003e(1) Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Extended Length Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(1) 10mm 6061 Aluminum Sandwich Plate Spacer\u003cbr\u003e(2) O-rings\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWith the release of the new 2016 Mazda Miata, the Mishimoto engineers are excited to help increase cooling efficiency. We all know that these fresh-off-the-production-line Miatas will find their way to track, so Mishimoto developed a direct-fit Miata oil cooler kit to keep oil temperatures in check. Mishimoto’s Miata oil cooler makes sure that your oil stays at optimal temperatures, while your Miata is making leading laps around the track. Unfortunately, the new 2016 Miata was not equipped with a stock oil cooler, making the addition of an oil cooler an important modification. \u003cbr\u003e\u003cbr\u003eThis Miata oil cooler kit features a Mishimoto 19-row stacked-plate oil cooler, which is placed directly in front of the radiator by application-specific mounting brackets for maximum air-flow. Application-specific braided stainless steel lines transfer oil from the cooler to the engine and feature -10AN fittings for an easy installation. Mishimoto engineers saw consistent temperature decreases of up to 57°F (29.5°C) using our non-thermostatic sandwich plate. \u003cbr\u003e\u003cbr\u003eThe cooler is available in a Sleek Silver or Stealth Black powdercoat finish with the choice of either the Mishimoto Thermostatic Oil Sandwich Plate or the Mishimoto Non-thermostatic Oil Sandwich Plate. As with the rest of the Mishimoto 2016 Miata parts, this oil cooler kit comes with the Mishimoto Lifetime Warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2025-04-14T11:29:11+08:00","created_at":"2018-01-24T23:24:03+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2015","2016","2017","2018","car-specific","cooling","mazda","mishimoto","mx-5-miata-roadster-nd5rc-2015-2018-na-p5-vp-rs-i4","mx-5-miata-roadster-rf-nderc-2016-2018-na-pe-vpr-rs-i4","oil-cooler-kits","oil-coolers","US1","ws111"],"price":108520,"price_min":108520,"price_max":108520,"available":true,"price_varies":false,"compare_at_price":108600,"compare_at_price_min":108600,"compare_at_price_max":108600,"compare_at_price_varies":false,"variants":[{"id":5990381715483,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-MIA-16BK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Mazda Miata Oil Cooler Kit - Black - ND - MMOC-MIA-16BK","public_title":null,"options":["Default Title"],"price":108520,"weight":8536,"compare_at_price":108600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-MIA-16BK.jpg?v=1710154068"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-MIA-16BK.jpg?v=1710154068","options":["Title"],"media":[{"alt":"Mishimoto - Mazda Miata Oil Cooler Kit - Black - ND - MMOC-MIA-16BK - Rzcrewgarage","id":1351399276641,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-MIA-16BK.jpg?v=1710154068"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-MIA-16BK.jpg?v=1710154068","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-MIA-16BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect-fit for the 2016+ Mazda MX-5 Miata\u003cbr\u003e19-row stacked-plate oil cooler drops temperatures up to 57°F (29.5°C)\u003cbr\u003eMinimal pressure drop\u003cbr\u003eApplication-specific mounting brackets mount the oil cooler in the front bumper\u003cbr\u003eMounting brackets made from aluminum for a lightweight design\u003cbr\u003ePre-made stainless steel braided oil lines with durable -AN fittings\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate\u003cbr\u003eThermostatic and Non-thermostatic options available\u003cbr\u003eCooler available in either Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by .75 qt\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eChassis Codes ND\u003cbr\u003ePressure Drop 3-5 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 57°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets w\/ Corrosion Resistant Mounting Hardware\u003cbr\u003e(1) 19 Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 3', 9\" Stainless Steel Braided Hose with Straight and 45 \/ 120 Degree -10AN Fittings\u003cbr\u003e(1) 4', 7\" Stainless Steel Braided Hose with 45 Degree and 45 \/ 120 Degree -10AN Fittings\u003cbr\u003e(1) Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Extended Length Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(1) 10mm 6061 Aluminum Sandwich Plate Spacer\u003cbr\u003e(2) O-rings\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWith the release of the new 2016 Mazda Miata, the Mishimoto engineers are excited to help increase cooling efficiency. We all know that these fresh-off-the-production-line Miatas will find their way to track, so Mishimoto developed a direct-fit Miata oil cooler kit to keep oil temperatures in check. Mishimoto’s Miata oil cooler makes sure that your oil stays at optimal temperatures, while your Miata is making leading laps around the track. Unfortunately, the new 2016 Miata was not equipped with a stock oil cooler, making the addition of an oil cooler an important modification. \u003cbr\u003e\u003cbr\u003eThis Miata oil cooler kit features a Mishimoto 19-row stacked-plate oil cooler, which is placed directly in front of the radiator by application-specific mounting brackets for maximum air-flow. Application-specific braided stainless steel lines transfer oil from the cooler to the engine and feature -10AN fittings for an easy installation. Mishimoto engineers saw consistent temperature decreases of up to 57°F (29.5°C) using our non-thermostatic sandwich plate. \u003cbr\u003e\u003cbr\u003eThe cooler is available in a Sleek Silver or Stealth Black powdercoat finish with the choice of either the Mishimoto Thermostatic Oil Sandwich Plate or the Mishimoto Non-thermostatic Oil Sandwich Plate. As with the rest of the Mishimoto 2016 Miata parts, this oil cooler kit comes with the Mishimoto Lifetime Warranty!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect-fit for the 2016+ Mazda MX-5 Miata\u003cbr\u003e19-row stacked-plate oil cooler drops temperatures up to 57°F (29.5°C)\u003cbr\u003eMinimal pressure drop\u003cbr\u003eApplication-specific mounting brackets mount the oil cooler in the front bumper\u003cbr\u003eMounting brackets made from aluminum for a lightweight design\u003cbr\u003ePre-made stainless steel braided oil lines with durable -AN fittings\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate\u003cbr\u003eThermostatic and Non-thermostatic options available\u003cbr\u003eCooler available in either Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by .75 qt\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eChassis Codes ND\u003cbr\u003ePressure Drop 3-5 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 57°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets w\/ Corrosion Resistant Mounting Hardware\u003cbr\u003e(1) 19 Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 3', 9\" Stainless Steel Braided Hose with Straight and 45 \/ 120 Degree -10AN Fittings\u003cbr\u003e(1) 4', 7\" Stainless Steel Braided Hose with 45 Degree and 45 \/ 120 Degree -10AN Fittings\u003cbr\u003e(1) Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Extended Length Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(1) 10mm 6061 Aluminum Sandwich Plate Spacer\u003cbr\u003e(2) O-rings\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWith the release of the new 2016 Mazda Miata, the Mishimoto engineers are excited to help increase cooling efficiency. We all know that these fresh-off-the-production-line Miatas will find their way to track, so Mishimoto developed a direct-fit Miata oil cooler kit to keep oil temperatures in check. Mishimoto’s Miata oil cooler makes sure that your oil stays at optimal temperatures, while your Miata is making leading laps around the track. Unfortunately, the new 2016 Miata was not equipped with a stock oil cooler, making the addition of an oil cooler an important modification. \u003cbr\u003e\u003cbr\u003eThis Miata oil cooler kit features a Mishimoto 19-row stacked-plate oil cooler, which is placed directly in front of the radiator by application-specific mounting brackets for maximum air-flow. Application-specific braided stainless steel lines transfer oil from the cooler to the engine and feature -10AN fittings for an easy installation. Mishimoto engineers saw consistent temperature decreases of up to 57°F (29.5°C) using our non-thermostatic sandwich plate. \u003cbr\u003e\u003cbr\u003eThe cooler is available in a Sleek Silver or Stealth Black powdercoat finish with the choice of either the Mishimoto Thermostatic Oil Sandwich Plate or the Mishimoto Non-thermostatic Oil Sandwich Plate. As with the rest of the Mishimoto 2016 Miata parts, this oil cooler kit comes with the Mishimoto Lifetime Warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561984798747,"title":"Mishimoto - Nissan 370Z Thermostatic Oil Cooler Kit - Z34 - MMOC-370Z-09T","handle":"mishimoto-nissan-370z-thermostatic-oil-cooler-kit-z34-mmoc-370z-09t","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-370Z-09T\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2009+ Nissan 370Z and 2008+ Infiniti G37 coupe\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote This product does not fit with Nismo front damper. Front damper needs to be removed for installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes VQ37VHR\u003cbr\u003eChassis Codes Z34, V36\u003cbr\u003ePressure Drop 2-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003eTemp Difference 30°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate M20, Silver\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new Nissan 370Z, 2009+ \/ Infiniti G37, 2008+ (Coupe only) Oil Cooler Kit. Specially designed for your Nissan 370Z and Infiniti G37, the Mishimoto 370z oil cooler kit is a direct fit and is beneficial to both manual and automatic applications. Enthusiasts who drive their high-performance cars on or off the track know the importance of keeping their oil temperatures low to prevent damage, or even seizure, of the engine. The Mishimoto Infiniti G37 \/ Nissan 370Z Oil Cooler Kit comes with a Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2009+ Nissan 370Z and 2008+ Infiniti G37 coupe\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote This product does not fit with Nismo front damper. Front damper needs to be removed for installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes VQ37VHR\u003cbr\u003eChassis Codes Z34, V36\u003cbr\u003ePressure Drop 2-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003eTemp Difference 30°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate M20, Silver\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new Nissan 370Z, 2009+ \/ Infiniti G37, 2008+ (Coupe only) Oil Cooler Kit. Specially designed for your Nissan 370Z and Infiniti G37, the Mishimoto 370z oil cooler kit is a direct fit and is beneficial to both manual and automatic applications. Enthusiasts who drive their high-performance cars on or off the track know the importance of keeping their oil temperatures low to prevent damage, or even seizure, of the engine. The Mishimoto Infiniti G37 \/ Nissan 370Z Oil Cooler Kit comes with a Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:23:56+08:00","created_at":"2018-01-24T23:23:57+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","car-specific","cooling","fairlady-z-z34-kouki-2012-2018-na-vq37vhr-v6","fairlady-z-z34-zenki-2008-2012-na-vq37vhr-v6","mishimoto","nissan","oil-cooler-kits","oil-coolers","US1","ws111"],"price":109090,"price_min":109090,"price_max":109090,"available":true,"price_varies":false,"compare_at_price":109100,"compare_at_price_min":109100,"compare_at_price_max":109100,"compare_at_price_varies":false,"variants":[{"id":5990380503067,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-370Z-09T","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Nissan 370Z Thermostatic Oil Cooler Kit - Z34 - MMOC-370Z-09T","public_title":null,"options":["Default Title"],"price":109090,"weight":9851,"compare_at_price":109100,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-370Z-09T.jpg?v=1710154063"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-370Z-09T.jpg?v=1710154063","options":["Title"],"media":[{"alt":"Mishimoto - Nissan 370Z Thermostatic Oil Cooler Kit - Z34 - MMOC-370Z-09T - Rzcrewgarage","id":1351399047265,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-370Z-09T.jpg?v=1710154063"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-370Z-09T.jpg?v=1710154063","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-370Z-09T\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2009+ Nissan 370Z and 2008+ Infiniti G37 coupe\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote This product does not fit with Nismo front damper. Front damper needs to be removed for installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes VQ37VHR\u003cbr\u003eChassis Codes Z34, V36\u003cbr\u003ePressure Drop 2-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003eTemp Difference 30°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate M20, Silver\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new Nissan 370Z, 2009+ \/ Infiniti G37, 2008+ (Coupe only) Oil Cooler Kit. Specially designed for your Nissan 370Z and Infiniti G37, the Mishimoto 370z oil cooler kit is a direct fit and is beneficial to both manual and automatic applications. Enthusiasts who drive their high-performance cars on or off the track know the importance of keeping their oil temperatures low to prevent damage, or even seizure, of the engine. The Mishimoto Infiniti G37 \/ Nissan 370Z Oil Cooler Kit comes with a Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2009+ Nissan 370Z and 2008+ Infiniti G37 coupe\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote This product does not fit with Nismo front damper. Front damper needs to be removed for installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes VQ37VHR\u003cbr\u003eChassis Codes Z34, V36\u003cbr\u003ePressure Drop 2-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003eTemp Difference 30°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate M20, Silver\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new Nissan 370Z, 2009+ \/ Infiniti G37, 2008+ (Coupe only) Oil Cooler Kit. Specially designed for your Nissan 370Z and Infiniti G37, the Mishimoto 370z oil cooler kit is a direct fit and is beneficial to both manual and automatic applications. Enthusiasts who drive their high-performance cars on or off the track know the importance of keeping their oil temperatures low to prevent damage, or even seizure, of the engine. The Mishimoto Infiniti G37 \/ Nissan 370Z Oil Cooler Kit comes with a Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561985814555,"title":"Mishimoto - Nissan 370Z Thermostatic Oil Cooler Kit, Black - Black - Z34 - MMOC-370Z-09TBK","handle":"mishimoto-nissan-370z-thermostatic-oil-cooler-kit-black-black-z34-mmoc-370z-09tbk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-370Z-09TBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2009+ Nissan 370Z and 2008+ Infiniti G37 coupe\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote This product does not fit with Nismo front damper. Front damper needs to be removed for installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes VQ37VHR\u003cbr\u003eChassis Codes Z34, V36\u003cbr\u003ePressure Drop 2-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003eTemp Difference 30°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate M20, Silver\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new Nissan 370Z, 2009+ \/ Infiniti G37, 2008+ (Coupe only) Oil Cooler Kit. Specially designed for your Nissan 370Z and Infiniti G37, the Mishimoto 370z oil cooler kit is a direct fit and is beneficial to both manual and automatic applications. Enthusiasts who drive their high-performance cars on or off the track know the importance of keeping their oil temperatures low to prevent damage, or even seizure, of the engine. The Mishimoto Infiniti G37 \/ Nissan 370Z Oil Cooler Kit comes with a Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2009+ Nissan 370Z and 2008+ Infiniti G37 coupe\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote This product does not fit with Nismo front damper. Front damper needs to be removed for installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes VQ37VHR\u003cbr\u003eChassis Codes Z34, V36\u003cbr\u003ePressure Drop 2-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003eTemp Difference 30°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate M20, Silver\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new Nissan 370Z, 2009+ \/ Infiniti G37, 2008+ (Coupe only) Oil Cooler Kit. Specially designed for your Nissan 370Z and Infiniti G37, the Mishimoto 370z oil cooler kit is a direct fit and is beneficial to both manual and automatic applications. Enthusiasts who drive their high-performance cars on or off the track know the importance of keeping their oil temperatures low to prevent damage, or even seizure, of the engine. The Mishimoto Infiniti G37 \/ Nissan 370Z Oil Cooler Kit comes with a Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:23:57+08:00","created_at":"2018-01-24T23:23:58+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","car-specific","cooling","fairlady-z-z34-kouki-2012-2018-na-vq37vhr-v6","fairlady-z-z34-zenki-2008-2012-na-vq37vhr-v6","mishimoto","nissan","oil-cooler-kits","oil-coolers","US1","ws111"],"price":109090,"price_min":109090,"price_max":109090,"available":true,"price_varies":false,"compare_at_price":109100,"compare_at_price_min":109100,"compare_at_price_max":109100,"compare_at_price_varies":false,"variants":[{"id":5990381518875,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-370Z-09TBK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Nissan 370Z Thermostatic Oil Cooler Kit, Black - Black - Z34 - MMOC-370Z-09TBK","public_title":null,"options":["Default Title"],"price":109090,"weight":10033,"compare_at_price":109100,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-370Z-09TBK.jpg?v=1710154066"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-370Z-09TBK.jpg?v=1710154066","options":["Title"],"media":[{"alt":"Mishimoto - Nissan 370Z Thermostatic Oil Cooler Kit, Black - Black - Z34 - MMOC-370Z-09TBK - Rzcrewgarage","id":1351399080033,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-370Z-09TBK.jpg?v=1710154066"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-370Z-09TBK.jpg?v=1710154066","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-370Z-09TBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2009+ Nissan 370Z and 2008+ Infiniti G37 coupe\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote This product does not fit with Nismo front damper. Front damper needs to be removed for installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes VQ37VHR\u003cbr\u003eChassis Codes Z34, V36\u003cbr\u003ePressure Drop 2-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003eTemp Difference 30°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate M20, Silver\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new Nissan 370Z, 2009+ \/ Infiniti G37, 2008+ (Coupe only) Oil Cooler Kit. Specially designed for your Nissan 370Z and Infiniti G37, the Mishimoto 370z oil cooler kit is a direct fit and is beneficial to both manual and automatic applications. Enthusiasts who drive their high-performance cars on or off the track know the importance of keeping their oil temperatures low to prevent damage, or even seizure, of the engine. The Mishimoto Infiniti G37 \/ Nissan 370Z Oil Cooler Kit comes with a Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2009+ Nissan 370Z and 2008+ Infiniti G37 coupe\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote This product does not fit with Nismo front damper. Front damper needs to be removed for installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes VQ37VHR\u003cbr\u003eChassis Codes Z34, V36\u003cbr\u003ePressure Drop 2-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003eTemp Difference 30°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate M20, Silver\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new Nissan 370Z, 2009+ \/ Infiniti G37, 2008+ (Coupe only) Oil Cooler Kit. Specially designed for your Nissan 370Z and Infiniti G37, the Mishimoto 370z oil cooler kit is a direct fit and is beneficial to both manual and automatic applications. Enthusiasts who drive their high-performance cars on or off the track know the importance of keeping their oil temperatures low to prevent damage, or even seizure, of the engine. The Mishimoto Infiniti G37 \/ Nissan 370Z Oil Cooler Kit comes with a Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":562200576027,"title":"Mishimoto - Subaru WRX Oil Cooler Kit - VAG - MMOC-WRX-15","handle":"mishimoto-subaru-wrx-oil-cooler-kit-vag-mmoc-wrx-15","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-15\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX\u003cbr\u003eProven 20+°F (11.1+°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined aluminum spacer for the oil sandwich plate\u003cbr\u003eSilicone hose bypasses stock liquid-to-liquid heat exchanger\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 25°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets\u003cbr\u003e(1) Application-Specific Oil Sandwich Plate\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings \u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20 x M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Large O-Ring\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is expanding their line of 2015 WRX parts! High oil temperatures can wreak havoc on your high-performance 2015 WRX FA20 DIT. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2015+ Subaru WRX. The 2015 WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock 2015 WRX liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit is designed to work in conjunction with the stock liquid-to-liquid to maintain optimal oil temperature. Properly regulated oil temperatures becomes even more important if you have modified your vehicle or spend time tracking your 2015 WRX. Mishimoto's direct-fit 2015 WRX oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific CNC-machined aluminum sandwich plate has been designed to allow proper clearance of the stock oil filter. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your 2015 WRX can achieve a +25°F (+13.9°C) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our 2015 WRX parts, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX\u003cbr\u003eProven 20+°F (11.1+°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined aluminum spacer for the oil sandwich plate\u003cbr\u003eSilicone hose bypasses stock liquid-to-liquid heat exchanger\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 25°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets\u003cbr\u003e(1) Application-Specific Oil Sandwich Plate\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings \u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20 x M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Large O-Ring\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is expanding their line of 2015 WRX parts! High oil temperatures can wreak havoc on your high-performance 2015 WRX FA20 DIT. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2015+ Subaru WRX. The 2015 WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock 2015 WRX liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit is designed to work in conjunction with the stock liquid-to-liquid to maintain optimal oil temperature. Properly regulated oil temperatures becomes even more important if you have modified your vehicle or spend time tracking your 2015 WRX. Mishimoto's direct-fit 2015 WRX oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific CNC-machined aluminum sandwich plate has been designed to allow proper clearance of the stock oil filter. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your 2015 WRX can achieve a +25°F (+13.9°C) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our 2015 WRX parts, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 5 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-25T00:19:23+08:00","created_at":"2018-01-25T00:19:23+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2014","2015","2016","2017","2018","car-specific","cooling","mishimoto","oil-cooler-kits","oil-coolers","subaru","US1","wrx-s4-vag-applied-a-2014-2015-tc-fa20f-h4","wrx-s4-vag-applied-b-2015-2016-tc-fa20f-h4","wrx-s4-vag-applied-c-2016-2018-tc-fa20f-h4","ws111"],"price":111070,"price_min":111070,"price_max":111070,"available":true,"price_varies":false,"compare_at_price":111100,"compare_at_price_min":111100,"compare_at_price_max":111100,"compare_at_price_varies":false,"variants":[{"id":5990720995355,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-WRX-15","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX Oil Cooler Kit - VAG - MMOC-WRX-15","public_title":null,"options":["Default Title"],"price":111070,"weight":8536,"compare_at_price":111100,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-15_65dde1ce-4e2b-46ca-8cac-64459a0a9001.jpg?v=1710154206"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-15_65dde1ce-4e2b-46ca-8cac-64459a0a9001.jpg?v=1710154206","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX Oil Cooler Kit - VAG - MMOC-WRX-15 - Rzcrewgarage","id":1351399964769,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-15_65dde1ce-4e2b-46ca-8cac-64459a0a9001.jpg?v=1710154206"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-15_65dde1ce-4e2b-46ca-8cac-64459a0a9001.jpg?v=1710154206","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-15\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX\u003cbr\u003eProven 20+°F (11.1+°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined aluminum spacer for the oil sandwich plate\u003cbr\u003eSilicone hose bypasses stock liquid-to-liquid heat exchanger\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 25°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets\u003cbr\u003e(1) Application-Specific Oil Sandwich Plate\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings \u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20 x M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Large O-Ring\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is expanding their line of 2015 WRX parts! High oil temperatures can wreak havoc on your high-performance 2015 WRX FA20 DIT. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2015+ Subaru WRX. The 2015 WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock 2015 WRX liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit is designed to work in conjunction with the stock liquid-to-liquid to maintain optimal oil temperature. Properly regulated oil temperatures becomes even more important if you have modified your vehicle or spend time tracking your 2015 WRX. Mishimoto's direct-fit 2015 WRX oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific CNC-machined aluminum sandwich plate has been designed to allow proper clearance of the stock oil filter. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your 2015 WRX can achieve a +25°F (+13.9°C) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our 2015 WRX parts, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX\u003cbr\u003eProven 20+°F (11.1+°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined aluminum spacer for the oil sandwich plate\u003cbr\u003eSilicone hose bypasses stock liquid-to-liquid heat exchanger\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 25°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets\u003cbr\u003e(1) Application-Specific Oil Sandwich Plate\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings \u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20 x M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Large O-Ring\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is expanding their line of 2015 WRX parts! High oil temperatures can wreak havoc on your high-performance 2015 WRX FA20 DIT. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2015+ Subaru WRX. The 2015 WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock 2015 WRX liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit is designed to work in conjunction with the stock liquid-to-liquid to maintain optimal oil temperature. Properly regulated oil temperatures becomes even more important if you have modified your vehicle or spend time tracking your 2015 WRX. Mishimoto's direct-fit 2015 WRX oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific CNC-machined aluminum sandwich plate has been designed to allow proper clearance of the stock oil filter. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your 2015 WRX can achieve a +25°F (+13.9°C) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our 2015 WRX parts, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 5 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":562201067547,"title":"Mishimoto - Subaru WRX Oil Cooler Kit - Black - VAG - MMOC-WRX-15BK","handle":"mishimoto-subaru-wrx-oil-cooler-kit-black-vag-mmoc-wrx-15bk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-15BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX\u003cbr\u003eProven 20+°F (11.1+°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined aluminum spacer for the oil sandwich plate\u003cbr\u003eSilicone hose bypasses stock liquid-to-liquid heat exchanger\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 25°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets\u003cbr\u003e(1) Application-Specific Oil Sandwich Plate\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings \u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20 x M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Large O-Ring\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is expanding their line of 2015 WRX parts! High oil temperatures can wreak havoc on your high-performance 2015 WRX FA20 DIT. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2015+ Subaru WRX. The 2015 WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock 2015 WRX liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit is designed to work in conjunction with the stock liquid-to-liquid to maintain optimal oil temperature. Properly regulated oil temperatures becomes even more important if you have modified your vehicle or spend time tracking your 2015 WRX. Mishimoto's direct-fit 2015 WRX oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific CNC-machined aluminum sandwich plate has been designed to allow proper clearance of the stock oil filter. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your 2015 WRX can achieve a +25°F (+13.9°C) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our 2015 WRX parts, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX\u003cbr\u003eProven 20+°F (11.1+°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined aluminum spacer for the oil sandwich plate\u003cbr\u003eSilicone hose bypasses stock liquid-to-liquid heat exchanger\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 25°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets\u003cbr\u003e(1) Application-Specific Oil Sandwich Plate\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings \u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20 x M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Large O-Ring\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is expanding their line of 2015 WRX parts! High oil temperatures can wreak havoc on your high-performance 2015 WRX FA20 DIT. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2015+ Subaru WRX. The 2015 WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock 2015 WRX liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit is designed to work in conjunction with the stock liquid-to-liquid to maintain optimal oil temperature. Properly regulated oil temperatures becomes even more important if you have modified your vehicle or spend time tracking your 2015 WRX. Mishimoto's direct-fit 2015 WRX oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific CNC-machined aluminum sandwich plate has been designed to allow proper clearance of the stock oil filter. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your 2015 WRX can achieve a +25°F (+13.9°C) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our 2015 WRX parts, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2025-04-14T11:29:10+08:00","created_at":"2018-01-25T00:19:24+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2014","2015","2016","2017","2018","car-specific","cooling","mishimoto","oil-cooler-kits","oil-coolers","subaru","US1","wrx-s4-vag-applied-a-2014-2015-tc-fa20f-h4","wrx-s4-vag-applied-b-2015-2016-tc-fa20f-h4","wrx-s4-vag-applied-c-2016-2018-tc-fa20f-h4","ws111"],"price":111070,"price_min":111070,"price_max":111070,"available":true,"price_varies":false,"compare_at_price":111100,"compare_at_price_min":111100,"compare_at_price_max":111100,"compare_at_price_varies":false,"variants":[{"id":5990721552411,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-WRX-15BK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX Oil Cooler Kit - Black - VAG - MMOC-WRX-15BK","public_title":null,"options":["Default Title"],"price":111070,"weight":9352,"compare_at_price":111100,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-15BK_b0958e94-83e2-4e5f-84bc-8c2c1e373a82.jpg?v=1710154206"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-15BK_b0958e94-83e2-4e5f-84bc-8c2c1e373a82.jpg?v=1710154206","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX Oil Cooler Kit - Black - VAG - MMOC-WRX-15BK - Rzcrewgarage","id":1351399997537,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-15BK_b0958e94-83e2-4e5f-84bc-8c2c1e373a82.jpg?v=1710154206"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-15BK_b0958e94-83e2-4e5f-84bc-8c2c1e373a82.jpg?v=1710154206","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-15BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX\u003cbr\u003eProven 20+°F (11.1+°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined aluminum spacer for the oil sandwich plate\u003cbr\u003eSilicone hose bypasses stock liquid-to-liquid heat exchanger\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 25°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets\u003cbr\u003e(1) Application-Specific Oil Sandwich Plate\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings \u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20 x M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Large O-Ring\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is expanding their line of 2015 WRX parts! High oil temperatures can wreak havoc on your high-performance 2015 WRX FA20 DIT. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2015+ Subaru WRX. The 2015 WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock 2015 WRX liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit is designed to work in conjunction with the stock liquid-to-liquid to maintain optimal oil temperature. Properly regulated oil temperatures becomes even more important if you have modified your vehicle or spend time tracking your 2015 WRX. Mishimoto's direct-fit 2015 WRX oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific CNC-machined aluminum sandwich plate has been designed to allow proper clearance of the stock oil filter. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your 2015 WRX can achieve a +25°F (+13.9°C) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our 2015 WRX parts, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX\u003cbr\u003eProven 20+°F (11.1+°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined aluminum spacer for the oil sandwich plate\u003cbr\u003eSilicone hose bypasses stock liquid-to-liquid heat exchanger\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 25°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets\u003cbr\u003e(1) Application-Specific Oil Sandwich Plate\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings \u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20 x M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Large O-Ring\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is expanding their line of 2015 WRX parts! High oil temperatures can wreak havoc on your high-performance 2015 WRX FA20 DIT. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2015+ Subaru WRX. The 2015 WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock 2015 WRX liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit is designed to work in conjunction with the stock liquid-to-liquid to maintain optimal oil temperature. Properly regulated oil temperatures becomes even more important if you have modified your vehicle or spend time tracking your 2015 WRX. Mishimoto's direct-fit 2015 WRX oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific CNC-machined aluminum sandwich plate has been designed to allow proper clearance of the stock oil filter. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your 2015 WRX can achieve a +25°F (+13.9°C) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our 2015 WRX parts, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561985847323,"title":"Mishimoto - Subaru BRZ Oil Cooler Kit - ZC6 - MMOC-BRZ-13","handle":"mishimoto-subaru-brz-oil-cooler-kit-zc6-mmoc-brz-13","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-BRZ-13\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2025-04-14T11:29:26+08:00","created_at":"2018-01-24T23:23:59+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2012","2013","2014","2015","2016","2017","2018","brz-zc6-applied-a-2012-2013-na-fa20d-h4","brz-zc6-applied-b-2013-2014-na-fa20d-h4","brz-zc6-applied-c-2014-2015-na-fa20d-h4","car-specific","cooling","mishimoto","oil-cooler-kits","oil-coolers","subaru","US1","ws111"],"price":112200,"price_min":112200,"price_max":112200,"available":true,"price_varies":false,"compare_at_price":112200,"compare_at_price_min":112200,"compare_at_price_max":112200,"compare_at_price_varies":false,"variants":[{"id":5990381551643,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-BRZ-13","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru BRZ Oil Cooler Kit - ZC6 - MMOC-BRZ-13","public_title":null,"options":["Default Title"],"price":112200,"weight":9851,"compare_at_price":112200,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13.jpg?v=1710154066"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13.jpg?v=1710154066","options":["Title"],"media":[{"alt":"Mishimoto - Subaru BRZ Oil Cooler Kit - ZC6 - MMOC-BRZ-13 - Rzcrewgarage","id":1351399112801,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13.jpg?v=1710154066"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13.jpg?v=1710154066","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-BRZ-13\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561985880091,"title":"Mishimoto - Subaru BRZ Oil Cooler Kit, Black - Black - ZC6 - MMOC-BRZ-13BK","handle":"mishimoto-subaru-brz-oil-cooler-kit-black-black-zc6-mmoc-brz-13bk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-BRZ-13BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:23:59+08:00","created_at":"2018-01-24T23:24:00+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2012","2013","2014","2015","2016","2017","2018","brz-zc6-applied-a-2012-2013-na-fa20d-h4","brz-zc6-applied-b-2013-2014-na-fa20d-h4","brz-zc6-applied-c-2014-2015-na-fa20d-h4","car-specific","cooling","mishimoto","oil-cooler-kits","oil-coolers","subaru","US1","ws111"],"price":112200,"price_min":112200,"price_max":112200,"available":true,"price_varies":false,"compare_at_price":112200,"compare_at_price_min":112200,"compare_at_price_max":112200,"compare_at_price_varies":false,"variants":[{"id":5990381584411,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-BRZ-13BK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru BRZ Oil Cooler Kit, Black - Black - ZC6 - MMOC-BRZ-13BK","public_title":null,"options":["Default Title"],"price":112200,"weight":10078,"compare_at_price":112200,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13BK.jpg?v=1710154066"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13BK.jpg?v=1710154066","options":["Title"],"media":[{"alt":"Mishimoto - Subaru BRZ Oil Cooler Kit, Black - Black - ZC6 - MMOC-BRZ-13BK - Rzcrewgarage","id":1351399145569,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13BK.jpg?v=1710154066"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13BK.jpg?v=1710154066","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-BRZ-13BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561993842715,"title":"Mishimoto - Toyota 86 Oil Cooler Kit - ZN6(ALL) - MMOC-BRZ-13","handle":"mishimoto-toyota-86-oil-cooler-kit-zn6all-mmoc-brz-13","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-BRZ-13\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2025-04-14T11:29:31+08:00","created_at":"2018-01-24T23:25:34+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2012","2013","2014","2015","2016","2017","2018","brz-zc6-applied-a-2012-2013-na-fa20d-h4","brz-zc6-applied-b-2013-2014-na-fa20d-h4","brz-zc6-applied-c-2014-2015-na-fa20d-h4","car-specific","cooling","mishimoto","oil-cooler-kits","oil-coolers","subaru","US1","ws111"],"price":112200,"price_min":112200,"price_max":112200,"available":true,"price_varies":false,"compare_at_price":112200,"compare_at_price_min":112200,"compare_at_price_max":112200,"compare_at_price_varies":false,"variants":[{"id":5990392889371,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-BRZ-13","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Toyota 86 Oil Cooler Kit - ZN6(ALL) - MMOC-BRZ-13","public_title":null,"options":["Default Title"],"price":112200,"weight":9851,"compare_at_price":112200,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13_114a9343-bcbb-431d-94fe-ba91c0ff3a8a.jpg?v=1710154117"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13_114a9343-bcbb-431d-94fe-ba91c0ff3a8a.jpg?v=1710154117","options":["Title"],"media":[{"alt":"Mishimoto - Toyota 86 Oil Cooler Kit - ZN6(ALL) - MMOC-BRZ-13 - Rzcrewgarage","id":1351402324065,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13_114a9343-bcbb-431d-94fe-ba91c0ff3a8a.jpg?v=1710154117"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13_114a9343-bcbb-431d-94fe-ba91c0ff3a8a.jpg?v=1710154117","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-BRZ-13\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561993875483,"title":"Mishimoto - Toyota 86 Oil Cooler Kit, Black - Black - ZN6(ALL) - MMOC-BRZ-13BK","handle":"mishimoto-toyota-86-oil-cooler-kit-black-black-zn6all-mmoc-brz-13bk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-BRZ-13BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:25:35+08:00","created_at":"2018-01-24T23:25:35+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2012","2013","2014","2015","2016","2017","2018","brz-zc6-applied-a-2012-2013-na-fa20d-h4","brz-zc6-applied-b-2013-2014-na-fa20d-h4","brz-zc6-applied-c-2014-2015-na-fa20d-h4","car-specific","cooling","mishimoto","oil-cooler-kits","oil-coolers","subaru","US1","ws111"],"price":112200,"price_min":112200,"price_max":112200,"available":true,"price_varies":false,"compare_at_price":112200,"compare_at_price_min":112200,"compare_at_price_max":112200,"compare_at_price_varies":false,"variants":[{"id":5990392922139,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-BRZ-13BK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Toyota 86 Oil Cooler Kit, Black - Black - ZN6(ALL) - MMOC-BRZ-13BK","public_title":null,"options":["Default Title"],"price":112200,"weight":10078,"compare_at_price":112200,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13BK_0a3072c9-0ee1-4353-8919-73d73042121b.jpg?v=1710154124"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13BK_0a3072c9-0ee1-4353-8919-73d73042121b.jpg?v=1710154124","options":["Title"],"media":[{"alt":"Mishimoto - Toyota 86 Oil Cooler Kit, Black - Black - ZN6(ALL) - MMOC-BRZ-13BK - Rzcrewgarage","id":1351402356833,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13BK_0a3072c9-0ee1-4353-8919-73d73042121b.jpg?v=1710154124"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13BK_0a3072c9-0ee1-4353-8919-73d73042121b.jpg?v=1710154124","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-BRZ-13BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561987649563,"title":"Mishimoto - Mazda Miata Oil Cooler Kit - ND - MMOC-MIA-16T","handle":"mishimoto-mazda-miata-oil-cooler-kit-nd-mmoc-mia-16t","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-MIA-16T\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect-fit for the 2016+ Mazda MX-5 Miata\u003cbr\u003e19-row stacked-plate oil cooler drops temperatures up to 57°F (29.5°C)\u003cbr\u003eMinimal pressure drop\u003cbr\u003eApplication-specific mounting brackets mount the oil cooler in the front bumper\u003cbr\u003eMounting brackets made from aluminum for a lightweight design\u003cbr\u003ePre-made stainless steel braided oil lines with durable -AN fittings\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate\u003cbr\u003eThermostatic and Non-thermostatic options available\u003cbr\u003eCooler available in either Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by .75 qt\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eChassis Codes ND\u003cbr\u003ePressure Drop 3-5 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 57°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets w\/ Corrosion Resistant Mounting Hardware\u003cbr\u003e(1) 19 Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 3', 9\" Stainless Steel Braided Hose with Straight and 45 \/ 120 Degree -10AN Fittings\u003cbr\u003e(1) 4', 7\" Stainless Steel Braided Hose with 45 Degree and 45 \/ 120 Degree -10AN Fittings\u003cbr\u003e(1) Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Extended Length Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(1) 10mm 6061 Aluminum Sandwich Plate Spacer\u003cbr\u003e(2) O-rings\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWith the release of the new 2016 Mazda Miata, the Mishimoto engineers are excited to help increase cooling efficiency. We all know that these fresh-off-the-production-line Miatas will find their way to track, so Mishimoto developed a direct-fit Miata oil cooler kit to keep oil temperatures in check. Mishimoto’s Miata oil cooler makes sure that your oil stays at optimal temperatures, while your Miata is making leading laps around the track. Unfortunately, the new 2016 Miata was not equipped with a stock oil cooler, making the addition of an oil cooler an important modification. \u003cbr\u003e\u003cbr\u003eThis Miata oil cooler kit features a Mishimoto 19-row stacked-plate oil cooler, which is placed directly in front of the radiator by application-specific mounting brackets for maximum air-flow. Application-specific braided stainless steel lines transfer oil from the cooler to the engine and feature -10AN fittings for an easy installation. Mishimoto engineers saw consistent temperature decreases of up to 57°F (29.5°C) using our non-thermostatic sandwich plate. \u003cbr\u003e\u003cbr\u003eThe cooler is available in a Sleek Silver or Stealth Black powdercoat finish with the choice of either the Mishimoto Thermostatic Oil Sandwich Plate or the Mishimoto Non-thermostatic Oil Sandwich Plate. As with the rest of the Mishimoto 2016 Miata parts, this oil cooler kit comes with the Mishimoto Lifetime Warranty!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect-fit for the 2016+ Mazda MX-5 Miata\u003cbr\u003e19-row stacked-plate oil cooler drops temperatures up to 57°F (29.5°C)\u003cbr\u003eMinimal pressure drop\u003cbr\u003eApplication-specific mounting brackets mount the oil cooler in the front bumper\u003cbr\u003eMounting brackets made from aluminum for a lightweight design\u003cbr\u003ePre-made stainless steel braided oil lines with durable -AN fittings\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate\u003cbr\u003eThermostatic and Non-thermostatic options available\u003cbr\u003eCooler available in either Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by .75 qt\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eChassis Codes ND\u003cbr\u003ePressure Drop 3-5 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 57°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets w\/ Corrosion Resistant Mounting Hardware\u003cbr\u003e(1) 19 Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 3', 9\" Stainless Steel Braided Hose with Straight and 45 \/ 120 Degree -10AN Fittings\u003cbr\u003e(1) 4', 7\" Stainless Steel Braided Hose with 45 Degree and 45 \/ 120 Degree -10AN Fittings\u003cbr\u003e(1) Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Extended Length Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(1) 10mm 6061 Aluminum Sandwich Plate Spacer\u003cbr\u003e(2) O-rings\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWith the release of the new 2016 Mazda Miata, the Mishimoto engineers are excited to help increase cooling efficiency. We all know that these fresh-off-the-production-line Miatas will find their way to track, so Mishimoto developed a direct-fit Miata oil cooler kit to keep oil temperatures in check. Mishimoto’s Miata oil cooler makes sure that your oil stays at optimal temperatures, while your Miata is making leading laps around the track. Unfortunately, the new 2016 Miata was not equipped with a stock oil cooler, making the addition of an oil cooler an important modification. \u003cbr\u003e\u003cbr\u003eThis Miata oil cooler kit features a Mishimoto 19-row stacked-plate oil cooler, which is placed directly in front of the radiator by application-specific mounting brackets for maximum air-flow. Application-specific braided stainless steel lines transfer oil from the cooler to the engine and feature -10AN fittings for an easy installation. Mishimoto engineers saw consistent temperature decreases of up to 57°F (29.5°C) using our non-thermostatic sandwich plate. \u003cbr\u003e\u003cbr\u003eThe cooler is available in a Sleek Silver or Stealth Black powdercoat finish with the choice of either the Mishimoto Thermostatic Oil Sandwich Plate or the Mishimoto Non-thermostatic Oil Sandwich Plate. As with the rest of the Mishimoto 2016 Miata parts, this oil cooler kit comes with the Mishimoto Lifetime Warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:22+08:00","created_at":"2018-01-24T23:24:23+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2015","2016","2017","2018","car-specific","cooling","mazda","mishimoto","mx-5-miata-roadster-nd5rc-2015-2018-na-p5-vp-rs-i4","mx-5-miata-roadster-rf-nderc-2016-2018-na-pe-vpr-rs-i4","oil-cooler-kits","oil-coolers","US1","ws111"],"price":116720,"price_min":116720,"price_max":116720,"available":true,"price_varies":false,"compare_at_price":116800,"compare_at_price_min":116800,"compare_at_price_max":116800,"compare_at_price_varies":false,"variants":[{"id":5990384402459,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-MIA-16T","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Mazda Miata Oil Cooler Kit - ND - MMOC-MIA-16T","public_title":null,"options":["Default Title"],"price":116720,"weight":9625,"compare_at_price":116800,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-MIA-16T.jpg?v=1710154080"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-MIA-16T.jpg?v=1710154080","options":["Title"],"media":[{"alt":"Mishimoto - Mazda Miata Oil Cooler Kit - ND - MMOC-MIA-16T - Rzcrewgarage","id":1351400226913,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-MIA-16T.jpg?v=1710154080"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-MIA-16T.jpg?v=1710154080","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-MIA-16T\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect-fit for the 2016+ Mazda MX-5 Miata\u003cbr\u003e19-row stacked-plate oil cooler drops temperatures up to 57°F (29.5°C)\u003cbr\u003eMinimal pressure drop\u003cbr\u003eApplication-specific mounting brackets mount the oil cooler in the front bumper\u003cbr\u003eMounting brackets made from aluminum for a lightweight design\u003cbr\u003ePre-made stainless steel braided oil lines with durable -AN fittings\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate\u003cbr\u003eThermostatic and Non-thermostatic options available\u003cbr\u003eCooler available in either Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by .75 qt\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eChassis Codes ND\u003cbr\u003ePressure Drop 3-5 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 57°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets w\/ Corrosion Resistant Mounting Hardware\u003cbr\u003e(1) 19 Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 3', 9\" Stainless Steel Braided Hose with Straight and 45 \/ 120 Degree -10AN Fittings\u003cbr\u003e(1) 4', 7\" Stainless Steel Braided Hose with 45 Degree and 45 \/ 120 Degree -10AN Fittings\u003cbr\u003e(1) Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Extended Length Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(1) 10mm 6061 Aluminum Sandwich Plate Spacer\u003cbr\u003e(2) O-rings\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWith the release of the new 2016 Mazda Miata, the Mishimoto engineers are excited to help increase cooling efficiency. We all know that these fresh-off-the-production-line Miatas will find their way to track, so Mishimoto developed a direct-fit Miata oil cooler kit to keep oil temperatures in check. Mishimoto’s Miata oil cooler makes sure that your oil stays at optimal temperatures, while your Miata is making leading laps around the track. Unfortunately, the new 2016 Miata was not equipped with a stock oil cooler, making the addition of an oil cooler an important modification. \u003cbr\u003e\u003cbr\u003eThis Miata oil cooler kit features a Mishimoto 19-row stacked-plate oil cooler, which is placed directly in front of the radiator by application-specific mounting brackets for maximum air-flow. Application-specific braided stainless steel lines transfer oil from the cooler to the engine and feature -10AN fittings for an easy installation. Mishimoto engineers saw consistent temperature decreases of up to 57°F (29.5°C) using our non-thermostatic sandwich plate. \u003cbr\u003e\u003cbr\u003eThe cooler is available in a Sleek Silver or Stealth Black powdercoat finish with the choice of either the Mishimoto Thermostatic Oil Sandwich Plate or the Mishimoto Non-thermostatic Oil Sandwich Plate. As with the rest of the Mishimoto 2016 Miata parts, this oil cooler kit comes with the Mishimoto Lifetime Warranty!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect-fit for the 2016+ Mazda MX-5 Miata\u003cbr\u003e19-row stacked-plate oil cooler drops temperatures up to 57°F (29.5°C)\u003cbr\u003eMinimal pressure drop\u003cbr\u003eApplication-specific mounting brackets mount the oil cooler in the front bumper\u003cbr\u003eMounting brackets made from aluminum for a lightweight design\u003cbr\u003ePre-made stainless steel braided oil lines with durable -AN fittings\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate\u003cbr\u003eThermostatic and Non-thermostatic options available\u003cbr\u003eCooler available in either Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by .75 qt\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eChassis Codes ND\u003cbr\u003ePressure Drop 3-5 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 57°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets w\/ Corrosion Resistant Mounting Hardware\u003cbr\u003e(1) 19 Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 3', 9\" Stainless Steel Braided Hose with Straight and 45 \/ 120 Degree -10AN Fittings\u003cbr\u003e(1) 4', 7\" Stainless Steel Braided Hose with 45 Degree and 45 \/ 120 Degree -10AN Fittings\u003cbr\u003e(1) Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Extended Length Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(1) 10mm 6061 Aluminum Sandwich Plate Spacer\u003cbr\u003e(2) O-rings\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWith the release of the new 2016 Mazda Miata, the Mishimoto engineers are excited to help increase cooling efficiency. We all know that these fresh-off-the-production-line Miatas will find their way to track, so Mishimoto developed a direct-fit Miata oil cooler kit to keep oil temperatures in check. Mishimoto’s Miata oil cooler makes sure that your oil stays at optimal temperatures, while your Miata is making leading laps around the track. Unfortunately, the new 2016 Miata was not equipped with a stock oil cooler, making the addition of an oil cooler an important modification. \u003cbr\u003e\u003cbr\u003eThis Miata oil cooler kit features a Mishimoto 19-row stacked-plate oil cooler, which is placed directly in front of the radiator by application-specific mounting brackets for maximum air-flow. Application-specific braided stainless steel lines transfer oil from the cooler to the engine and feature -10AN fittings for an easy installation. Mishimoto engineers saw consistent temperature decreases of up to 57°F (29.5°C) using our non-thermostatic sandwich plate. \u003cbr\u003e\u003cbr\u003eThe cooler is available in a Sleek Silver or Stealth Black powdercoat finish with the choice of either the Mishimoto Thermostatic Oil Sandwich Plate or the Mishimoto Non-thermostatic Oil Sandwich Plate. As with the rest of the Mishimoto 2016 Miata parts, this oil cooler kit comes with the Mishimoto Lifetime Warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561987682331,"title":"Mishimoto - Mazda Miata Oil Cooler Kit - Black - ND - MMOC-MIA-16TBK","handle":"mishimoto-mazda-miata-oil-cooler-kit-black-nd-mmoc-mia-16tbk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-MIA-16TBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect-fit for the 2016+ Mazda MX-5 Miata\u003cbr\u003e19-row stacked-plate oil cooler drops temperatures up to 57°F (29.5°C)\u003cbr\u003eMinimal pressure drop\u003cbr\u003eApplication-specific mounting brackets mount the oil cooler in the front bumper\u003cbr\u003eMounting brackets made from aluminum for a lightweight design\u003cbr\u003ePre-made stainless steel braided oil lines with durable -AN fittings\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate\u003cbr\u003eThermostatic and Non-thermostatic options available\u003cbr\u003eCooler available in either Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by .75 qt\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eChassis Codes ND\u003cbr\u003ePressure Drop 3-5 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 57°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets w\/ Corrosion Resistant Mounting Hardware\u003cbr\u003e(1) 19 Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 3', 9\" Stainless Steel Braided Hose with Straight and 45 \/ 120 Degree -10AN Fittings\u003cbr\u003e(1) 4', 7\" Stainless Steel Braided Hose with 45 Degree and 45 \/ 120 Degree -10AN Fittings\u003cbr\u003e(1) Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Extended Length Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(1) 10mm 6061 Aluminum Sandwich Plate Spacer\u003cbr\u003e(2) O-rings\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWith the release of the new 2016 Mazda Miata, the Mishimoto engineers are excited to help increase cooling efficiency. We all know that these fresh-off-the-production-line Miatas will find their way to track, so Mishimoto developed a direct-fit Miata oil cooler kit to keep oil temperatures in check. Mishimoto’s Miata oil cooler makes sure that your oil stays at optimal temperatures, while your Miata is making leading laps around the track. Unfortunately, the new 2016 Miata was not equipped with a stock oil cooler, making the addition of an oil cooler an important modification. \u003cbr\u003e\u003cbr\u003eThis Miata oil cooler kit features a Mishimoto 19-row stacked-plate oil cooler, which is placed directly in front of the radiator by application-specific mounting brackets for maximum air-flow. Application-specific braided stainless steel lines transfer oil from the cooler to the engine and feature -10AN fittings for an easy installation. Mishimoto engineers saw consistent temperature decreases of up to 57°F (29.5°C) using our non-thermostatic sandwich plate. \u003cbr\u003e\u003cbr\u003eThe cooler is available in a Sleek Silver or Stealth Black powdercoat finish with the choice of either the Mishimoto Thermostatic Oil Sandwich Plate or the Mishimoto Non-thermostatic Oil Sandwich Plate. As with the rest of the Mishimoto 2016 Miata parts, this oil cooler kit comes with the Mishimoto Lifetime Warranty!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect-fit for the 2016+ Mazda MX-5 Miata\u003cbr\u003e19-row stacked-plate oil cooler drops temperatures up to 57°F (29.5°C)\u003cbr\u003eMinimal pressure drop\u003cbr\u003eApplication-specific mounting brackets mount the oil cooler in the front bumper\u003cbr\u003eMounting brackets made from aluminum for a lightweight design\u003cbr\u003ePre-made stainless steel braided oil lines with durable -AN fittings\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate\u003cbr\u003eThermostatic and Non-thermostatic options available\u003cbr\u003eCooler available in either Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by .75 qt\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eChassis Codes ND\u003cbr\u003ePressure Drop 3-5 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 57°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets w\/ Corrosion Resistant Mounting Hardware\u003cbr\u003e(1) 19 Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 3', 9\" Stainless Steel Braided Hose with Straight and 45 \/ 120 Degree -10AN Fittings\u003cbr\u003e(1) 4', 7\" Stainless Steel Braided Hose with 45 Degree and 45 \/ 120 Degree -10AN Fittings\u003cbr\u003e(1) Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Extended Length Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(1) 10mm 6061 Aluminum Sandwich Plate Spacer\u003cbr\u003e(2) O-rings\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWith the release of the new 2016 Mazda Miata, the Mishimoto engineers are excited to help increase cooling efficiency. We all know that these fresh-off-the-production-line Miatas will find their way to track, so Mishimoto developed a direct-fit Miata oil cooler kit to keep oil temperatures in check. Mishimoto’s Miata oil cooler makes sure that your oil stays at optimal temperatures, while your Miata is making leading laps around the track. Unfortunately, the new 2016 Miata was not equipped with a stock oil cooler, making the addition of an oil cooler an important modification. \u003cbr\u003e\u003cbr\u003eThis Miata oil cooler kit features a Mishimoto 19-row stacked-plate oil cooler, which is placed directly in front of the radiator by application-specific mounting brackets for maximum air-flow. Application-specific braided stainless steel lines transfer oil from the cooler to the engine and feature -10AN fittings for an easy installation. Mishimoto engineers saw consistent temperature decreases of up to 57°F (29.5°C) using our non-thermostatic sandwich plate. \u003cbr\u003e\u003cbr\u003eThe cooler is available in a Sleek Silver or Stealth Black powdercoat finish with the choice of either the Mishimoto Thermostatic Oil Sandwich Plate or the Mishimoto Non-thermostatic Oil Sandwich Plate. As with the rest of the Mishimoto 2016 Miata parts, this oil cooler kit comes with the Mishimoto Lifetime Warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 5 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2025-04-14T11:29:18+08:00","created_at":"2018-01-24T23:24:25+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2015","2016","2017","2018","car-specific","cooling","mazda","mishimoto","mx-5-miata-roadster-nd5rc-2015-2018-na-p5-vp-rs-i4","mx-5-miata-roadster-rf-nderc-2016-2018-na-pe-vpr-rs-i4","oil-cooler-kits","oil-coolers","US1","ws111"],"price":116720,"price_min":116720,"price_max":116720,"available":true,"price_varies":false,"compare_at_price":116800,"compare_at_price_min":116800,"compare_at_price_max":116800,"compare_at_price_varies":false,"variants":[{"id":5990384435227,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-MIA-16TBK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Mazda Miata Oil Cooler Kit - Black - ND - MMOC-MIA-16TBK","public_title":null,"options":["Default Title"],"price":116720,"weight":9579,"compare_at_price":116800,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-MIA-16TBK.jpg?v=1710154080"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-MIA-16TBK.jpg?v=1710154080","options":["Title"],"media":[{"alt":"Mishimoto - Mazda Miata Oil Cooler Kit - Black - ND - MMOC-MIA-16TBK - Rzcrewgarage","id":1351400259681,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-MIA-16TBK.jpg?v=1710154080"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-MIA-16TBK.jpg?v=1710154080","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-MIA-16TBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect-fit for the 2016+ Mazda MX-5 Miata\u003cbr\u003e19-row stacked-plate oil cooler drops temperatures up to 57°F (29.5°C)\u003cbr\u003eMinimal pressure drop\u003cbr\u003eApplication-specific mounting brackets mount the oil cooler in the front bumper\u003cbr\u003eMounting brackets made from aluminum for a lightweight design\u003cbr\u003ePre-made stainless steel braided oil lines with durable -AN fittings\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate\u003cbr\u003eThermostatic and Non-thermostatic options available\u003cbr\u003eCooler available in either Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by .75 qt\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eChassis Codes ND\u003cbr\u003ePressure Drop 3-5 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 57°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets w\/ Corrosion Resistant Mounting Hardware\u003cbr\u003e(1) 19 Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 3', 9\" Stainless Steel Braided Hose with Straight and 45 \/ 120 Degree -10AN Fittings\u003cbr\u003e(1) 4', 7\" Stainless Steel Braided Hose with 45 Degree and 45 \/ 120 Degree -10AN Fittings\u003cbr\u003e(1) Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Extended Length Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(1) 10mm 6061 Aluminum Sandwich Plate Spacer\u003cbr\u003e(2) O-rings\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWith the release of the new 2016 Mazda Miata, the Mishimoto engineers are excited to help increase cooling efficiency. We all know that these fresh-off-the-production-line Miatas will find their way to track, so Mishimoto developed a direct-fit Miata oil cooler kit to keep oil temperatures in check. Mishimoto’s Miata oil cooler makes sure that your oil stays at optimal temperatures, while your Miata is making leading laps around the track. Unfortunately, the new 2016 Miata was not equipped with a stock oil cooler, making the addition of an oil cooler an important modification. \u003cbr\u003e\u003cbr\u003eThis Miata oil cooler kit features a Mishimoto 19-row stacked-plate oil cooler, which is placed directly in front of the radiator by application-specific mounting brackets for maximum air-flow. Application-specific braided stainless steel lines transfer oil from the cooler to the engine and feature -10AN fittings for an easy installation. Mishimoto engineers saw consistent temperature decreases of up to 57°F (29.5°C) using our non-thermostatic sandwich plate. \u003cbr\u003e\u003cbr\u003eThe cooler is available in a Sleek Silver or Stealth Black powdercoat finish with the choice of either the Mishimoto Thermostatic Oil Sandwich Plate or the Mishimoto Non-thermostatic Oil Sandwich Plate. As with the rest of the Mishimoto 2016 Miata parts, this oil cooler kit comes with the Mishimoto Lifetime Warranty!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect-fit for the 2016+ Mazda MX-5 Miata\u003cbr\u003e19-row stacked-plate oil cooler drops temperatures up to 57°F (29.5°C)\u003cbr\u003eMinimal pressure drop\u003cbr\u003eApplication-specific mounting brackets mount the oil cooler in the front bumper\u003cbr\u003eMounting brackets made from aluminum for a lightweight design\u003cbr\u003ePre-made stainless steel braided oil lines with durable -AN fittings\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate\u003cbr\u003eThermostatic and Non-thermostatic options available\u003cbr\u003eCooler available in either Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by .75 qt\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eChassis Codes ND\u003cbr\u003ePressure Drop 3-5 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 57°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets w\/ Corrosion Resistant Mounting Hardware\u003cbr\u003e(1) 19 Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 3', 9\" Stainless Steel Braided Hose with Straight and 45 \/ 120 Degree -10AN Fittings\u003cbr\u003e(1) 4', 7\" Stainless Steel Braided Hose with 45 Degree and 45 \/ 120 Degree -10AN Fittings\u003cbr\u003e(1) Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Extended Length Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(1) 10mm 6061 Aluminum Sandwich Plate Spacer\u003cbr\u003e(2) O-rings\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWith the release of the new 2016 Mazda Miata, the Mishimoto engineers are excited to help increase cooling efficiency. We all know that these fresh-off-the-production-line Miatas will find their way to track, so Mishimoto developed a direct-fit Miata oil cooler kit to keep oil temperatures in check. Mishimoto’s Miata oil cooler makes sure that your oil stays at optimal temperatures, while your Miata is making leading laps around the track. Unfortunately, the new 2016 Miata was not equipped with a stock oil cooler, making the addition of an oil cooler an important modification. \u003cbr\u003e\u003cbr\u003eThis Miata oil cooler kit features a Mishimoto 19-row stacked-plate oil cooler, which is placed directly in front of the radiator by application-specific mounting brackets for maximum air-flow. Application-specific braided stainless steel lines transfer oil from the cooler to the engine and feature -10AN fittings for an easy installation. Mishimoto engineers saw consistent temperature decreases of up to 57°F (29.5°C) using our non-thermostatic sandwich plate. \u003cbr\u003e\u003cbr\u003eThe cooler is available in a Sleek Silver or Stealth Black powdercoat finish with the choice of either the Mishimoto Thermostatic Oil Sandwich Plate or the Mishimoto Non-thermostatic Oil Sandwich Plate. As with the rest of the Mishimoto 2016 Miata parts, this oil cooler kit comes with the Mishimoto Lifetime Warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 5 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561987584027,"title":"Mishimoto - Subaru BRZ Thermostatic Oil Cooler Kit - ZC6 - MMOC-BRZ-13T","handle":"mishimoto-subaru-brz-thermostatic-oil-cooler-kit-zc6-mmoc-brz-13t","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-BRZ-13T\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2025-04-14T11:29:19+08:00","created_at":"2018-01-24T23:24:21+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2012","2013","2014","2015","2016","2017","2018","brz-zc6-applied-a-2012-2013-na-fa20d-h4","brz-zc6-applied-b-2013-2014-na-fa20d-h4","brz-zc6-applied-c-2014-2015-na-fa20d-h4","car-specific","cooling","mishimoto","oil-cooler-kits","oil-coolers","subaru","US1","ws110"],"price":120680,"price_min":120680,"price_max":120680,"available":true,"price_varies":false,"compare_at_price":120600,"compare_at_price_min":120600,"compare_at_price_max":120600,"compare_at_price_varies":false,"variants":[{"id":5990384336923,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-BRZ-13T","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru BRZ Thermostatic Oil Cooler Kit - ZC6 - MMOC-BRZ-13T","public_title":null,"options":["Default Title"],"price":120680,"weight":9670,"compare_at_price":120600,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13T.jpg?v=1710154080"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13T.jpg?v=1710154080","options":["Title"],"media":[{"alt":"Mishimoto - Subaru BRZ Thermostatic Oil Cooler Kit - ZC6 - MMOC-BRZ-13T - Rzcrewgarage","id":1351400161377,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13T.jpg?v=1710154080"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13T.jpg?v=1710154080","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-BRZ-13T\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561987616795,"title":"Mishimoto - Subaru BRZ Thermostatic Oil Cooler Kit, Black - Black - ZC6 - MMOC-BRZ-13TBK","handle":"mishimoto-subaru-brz-thermostatic-oil-cooler-kit-black-black-zc6-mmoc-brz-13tbk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-BRZ-13TBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:21+08:00","created_at":"2018-01-24T23:24:22+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2012","2013","2014","2015","2016","2017","2018","brz-zc6-applied-a-2012-2013-na-fa20d-h4","brz-zc6-applied-b-2013-2014-na-fa20d-h4","brz-zc6-applied-c-2014-2015-na-fa20d-h4","car-specific","cooling","mishimoto","oil-cooler-kits","oil-coolers","subaru","US1","ws110"],"price":120680,"price_min":120680,"price_max":120680,"available":true,"price_varies":false,"compare_at_price":120600,"compare_at_price_min":120600,"compare_at_price_max":120600,"compare_at_price_varies":false,"variants":[{"id":5990384369691,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-BRZ-13TBK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru BRZ Thermostatic Oil Cooler Kit, Black - Black - ZC6 - MMOC-BRZ-13TBK","public_title":null,"options":["Default Title"],"price":120680,"weight":10169,"compare_at_price":120600,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13TBK.jpg?v=1710154081"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13TBK.jpg?v=1710154081","options":["Title"],"media":[{"alt":"Mishimoto - Subaru BRZ Thermostatic Oil Cooler Kit, Black - Black - ZC6 - MMOC-BRZ-13TBK - Rzcrewgarage","id":1351400194145,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13TBK.jpg?v=1710154081"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13TBK.jpg?v=1710154081","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-BRZ-13TBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561988960283,"title":"Mishimoto - Toyota 86 Thermostatic Oil Cooler Kit - ZN6 - MMOC-BRZ-13T","handle":"mishimoto-toyota-86-thermostatic-oil-cooler-kit-zn6-mmoc-brz-13t","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-BRZ-13T\u003cbr\u003eTransmission: MT\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDirect fit f\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e86 | ZN6 SPEC A | 2012-2013 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC B | 2013-2014 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC C | 2014-2015 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC D | 2015-2016 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC E | 2016-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e","published_at":"2025-04-14T11:15:55+08:00","created_at":"2018-01-24T23:24:34+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2012","2013","2014","2015","2016","2017","2018","86-zn6-spec-b-2013-2014-na-4u-gse-h4","86-zn6-spec-c-2014-2015-na-4u-gse-h4","86-zn6-spec-d-2015-2016-na-4u-gse-h4","86-zn6-spec-e-2016-2018-na-4u-gse-h4","car-specific","cooling","mishimoto","oil-cooler-kits","oil-coolers","toyota","US1","ws110"],"price":120680,"price_min":120680,"price_max":120680,"available":true,"price_varies":false,"compare_at_price":120600,"compare_at_price_min":120600,"compare_at_price_max":120600,"compare_at_price_varies":false,"variants":[{"id":5990385745947,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-BRZ-13T","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Toyota 86 Thermostatic Oil Cooler Kit - ZN6 - MMOC-BRZ-13T","public_title":null,"options":["Default Title"],"price":120680,"weight":9670,"compare_at_price":120600,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13T_7492df8e-7432-45e1-bf35-d71868ef4a08.jpg?v=1710154085"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13T_7492df8e-7432-45e1-bf35-d71868ef4a08.jpg?v=1710154085","options":["Title"],"media":[{"alt":"mishimoto-toyota-86-thermostatic-oil-cooler-kit-zn6-mmoc-brz-13t - RZCREWGARAGE","id":1351328989281,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13T_7492df8e-7432-45e1-bf35-d71868ef4a08.jpg?v=1710154085"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13T_7492df8e-7432-45e1-bf35-d71868ef4a08.jpg?v=1710154085","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-BRZ-13T\u003cbr\u003eTransmission: MT\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDirect fit f\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e86 | ZN6 SPEC A | 2012-2013 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC B | 2013-2014 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC C | 2014-2015 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC D | 2015-2016 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC E | 2016-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e"}

{"id":561989025819,"title":"Mishimoto - Toyota 86 Thermostatic Oil Cooler Kit, Black - Black - ZN6 - MMOC-BRZ-13TBK","handle":"mishimoto-toyota-86-thermostatic-oil-cooler-kit-black-black-zn6-mmoc-brz-13tbk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-BRZ-13TBK\u003cbr\u003eTransmission: MT\u003cbr\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e86 | ZN6 SPEC A | 2012-2013 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC B | 2013-2014 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC C | 2014-2015 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC D | 2015-2016 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC E | 2016-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e","published_at":"2018-01-24T23:24:34+08:00","created_at":"2018-01-24T23:24:35+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2012","2013","2014","2015","2016","2017","2018","86-zn6-spec-b-2013-2014-na-4u-gse-h4","86-zn6-spec-c-2014-2015-na-4u-gse-h4","86-zn6-spec-d-2015-2016-na-4u-gse-h4","86-zn6-spec-e-2016-2018-na-4u-gse-h4","car-specific","cooling","mishimoto","oil-cooler-kits","oil-coolers","toyota","US1","ws110"],"price":120680,"price_min":120680,"price_max":120680,"available":true,"price_varies":false,"compare_at_price":120600,"compare_at_price_min":120600,"compare_at_price_max":120600,"compare_at_price_varies":false,"variants":[{"id":5990386171931,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-BRZ-13TBK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Toyota 86 Thermostatic Oil Cooler Kit, Black - Black - ZN6 - MMOC-BRZ-13TBK","public_title":null,"options":["Default Title"],"price":120680,"weight":10169,"compare_at_price":120600,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13TBK_b3bde20f-afcb-471e-bff0-e7431f65e6ba.jpg?v=1710154085"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13TBK_b3bde20f-afcb-471e-bff0-e7431f65e6ba.jpg?v=1710154085","options":["Title"],"media":[{"alt":"mishimoto-toyota-86-thermostatic-oil-cooler-kit-black-black-zn6-mmoc-brz-13tbk - RZCREWGARAGE","id":1351329022049,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13TBK_b3bde20f-afcb-471e-bff0-e7431f65e6ba.jpg?v=1710154085"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13TBK_b3bde20f-afcb-471e-bff0-e7431f65e6ba.jpg?v=1710154085","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-BRZ-13TBK\u003cbr\u003eTransmission: MT\u003cbr\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e86 | ZN6 SPEC A | 2012-2013 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC B | 2013-2014 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC C | 2014-2015 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC D | 2015-2016 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC E | 2016-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e"}

{"id":566039904283,"title":"Mishimoto - Toyota 86 Thermostatic Oil Cooler Kit - ZN6(ALL) - MMOC-BRZ-13T","handle":"mishimoto-toyota-86-thermostatic-oil-cooler-kit-zn6all-mmoc-brz-13t","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-BRZ-13T\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2025-04-14T11:29:19+08:00","created_at":"2018-01-25T16:53:03+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2012","2013","2014","2015","2016","2017","2018","brz-zc6-applied-a-2012-2013-na-fa20d-h4","brz-zc6-applied-b-2013-2014-na-fa20d-h4","brz-zc6-applied-c-2014-2015-na-fa20d-h4","car-specific","cooling","mishimoto","oil-cooler-kits","oil-coolers","subaru","US1","ws110"],"price":120680,"price_min":120680,"price_max":120680,"available":true,"price_varies":false,"compare_at_price":120600,"compare_at_price_min":120600,"compare_at_price_max":120600,"compare_at_price_varies":false,"variants":[{"id":6001321574427,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-BRZ-13T","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Toyota 86 Thermostatic Oil Cooler Kit - ZN6(ALL) - MMOC-BRZ-13T","public_title":null,"options":["Default Title"],"price":120680,"weight":9670,"compare_at_price":120600,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13T_e32caee8-50dd-4b90-9e10-f3d5adc47b47.jpg?v=1710154212"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13T_e32caee8-50dd-4b90-9e10-f3d5adc47b47.jpg?v=1710154212","options":["Title"],"media":[{"alt":"Mishimoto - Toyota 86 Thermostatic Oil Cooler Kit - ZN6(ALL) - MMOC-BRZ-13T - Rzcrewgarage","id":1351400587361,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13T_e32caee8-50dd-4b90-9e10-f3d5adc47b47.jpg?v=1710154212"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13T_e32caee8-50dd-4b90-9e10-f3d5adc47b47.jpg?v=1710154212","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-BRZ-13T\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":566039969819,"title":"Mishimoto - Toyota 86 Thermostatic Oil Cooler Kit, Black - Black - ZN6(ALL) - MMOC-BRZ-13TBK","handle":"mishimoto-toyota-86-thermostatic-oil-cooler-kit-black-black-zn6all-mmoc-brz-13tbk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-BRZ-13TBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-25T16:53:04+08:00","created_at":"2018-01-25T16:53:04+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2012","2013","2014","2015","2016","2017","2018","brz-zc6-applied-a-2012-2013-na-fa20d-h4","brz-zc6-applied-b-2013-2014-na-fa20d-h4","brz-zc6-applied-c-2014-2015-na-fa20d-h4","car-specific","cooling","mishimoto","oil-cooler-kits","oil-coolers","subaru","US1","ws110"],"price":120680,"price_min":120680,"price_max":120680,"available":true,"price_varies":false,"compare_at_price":120600,"compare_at_price_min":120600,"compare_at_price_max":120600,"compare_at_price_varies":false,"variants":[{"id":6001321639963,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-BRZ-13TBK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Toyota 86 Thermostatic Oil Cooler Kit, Black - Black - ZN6(ALL) - MMOC-BRZ-13TBK","public_title":null,"options":["Default Title"],"price":120680,"weight":10169,"compare_at_price":120600,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13TBK_70bb8876-549c-4d37-acf0-0ff937c824ed.jpg?v=1710154211"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13TBK_70bb8876-549c-4d37-acf0-0ff937c824ed.jpg?v=1710154211","options":["Title"],"media":[{"alt":"Mishimoto - Toyota 86 Thermostatic Oil Cooler Kit, Black - Black - ZN6(ALL) - MMOC-BRZ-13TBK - Rzcrewgarage","id":1351400620129,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13TBK_70bb8876-549c-4d37-acf0-0ff937c824ed.jpg?v=1710154211"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13TBK_70bb8876-549c-4d37-acf0-0ff937c824ed.jpg?v=1710154211","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-BRZ-13TBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561987715099,"title":"Mishimoto - Subaru WRX Thermostatic Oil Cooler Kit - VAG - MMOC-WRX-15T","handle":"mishimoto-subaru-wrx-thermostatic-oil-cooler-kit-vag-mmoc-wrx-15t","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-15T\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX\u003cbr\u003eProven 20+°F (11.1+°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined aluminum spacer for the oil sandwich plate\u003cbr\u003eSilicone hose bypasses stock liquid-to-liquid heat exchanger\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 25°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets\u003cbr\u003e(1) Application-Specific Oil Sandwich Plate\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings \u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20 x M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Large O-Ring\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is expanding their line of 2015 WRX parts! High oil temperatures can wreak havoc on your high-performance 2015 WRX FA20 DIT. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2015+ Subaru WRX. The 2015 WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock 2015 WRX liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit is designed to work in conjunction with the stock liquid-to-liquid to maintain optimal oil temperature. Properly regulated oil temperatures becomes even more important if you have modified your vehicle or spend time tracking your 2015 WRX. Mishimoto's direct-fit 2015 WRX oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific CNC-machined aluminum sandwich plate has been designed to allow proper clearance of the stock oil filter. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your 2015 WRX can achieve a +25°F (+13.9°C) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our 2015 WRX parts, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX\u003cbr\u003eProven 20+°F (11.1+°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined aluminum spacer for the oil sandwich plate\u003cbr\u003eSilicone hose bypasses stock liquid-to-liquid heat exchanger\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 25°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets\u003cbr\u003e(1) Application-Specific Oil Sandwich Plate\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings \u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20 x M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Large O-Ring\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is expanding their line of 2015 WRX parts! High oil temperatures can wreak havoc on your high-performance 2015 WRX FA20 DIT. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2015+ Subaru WRX. The 2015 WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock 2015 WRX liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit is designed to work in conjunction with the stock liquid-to-liquid to maintain optimal oil temperature. Properly regulated oil temperatures becomes even more important if you have modified your vehicle or spend time tracking your 2015 WRX. Mishimoto's direct-fit 2015 WRX oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific CNC-machined aluminum sandwich plate has been designed to allow proper clearance of the stock oil filter. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your 2015 WRX can achieve a +25°F (+13.9°C) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our 2015 WRX parts, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:25+08:00","created_at":"2018-01-24T23:24:26+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2014","2015","2016","2017","2018","car-specific","cooling","mishimoto","oil-cooler-kits","oil-coolers","subaru","US1","wrx-s4-vag-applied-a-2014-2015-tc-fa20f-h4","wrx-s4-vag-applied-b-2015-2016-tc-fa20f-h4","wrx-s4-vag-applied-c-2016-2018-tc-fa20f-h4","ws110"],"price":129300,"price_min":129300,"price_max":129300,"available":true,"price_varies":false,"compare_at_price":129200,"compare_at_price_min":129200,"compare_at_price_max":129200,"compare_at_price_varies":false,"variants":[{"id":5990384467995,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-WRX-15T","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX Thermostatic Oil Cooler Kit - VAG - MMOC-WRX-15T","public_title":null,"options":["Default Title"],"price":129300,"weight":9488,"compare_at_price":129200,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-15T.jpg?v=1710154082"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-15T.jpg?v=1710154082","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX Thermostatic Oil Cooler Kit - VAG - MMOC-WRX-15T - Rzcrewgarage","id":1351400325217,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-15T.jpg?v=1710154082"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-15T.jpg?v=1710154082","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-15T\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX\u003cbr\u003eProven 20+°F (11.1+°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined aluminum spacer for the oil sandwich plate\u003cbr\u003eSilicone hose bypasses stock liquid-to-liquid heat exchanger\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 25°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets\u003cbr\u003e(1) Application-Specific Oil Sandwich Plate\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings \u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20 x M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Large O-Ring\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is expanding their line of 2015 WRX parts! High oil temperatures can wreak havoc on your high-performance 2015 WRX FA20 DIT. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2015+ Subaru WRX. The 2015 WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock 2015 WRX liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit is designed to work in conjunction with the stock liquid-to-liquid to maintain optimal oil temperature. Properly regulated oil temperatures becomes even more important if you have modified your vehicle or spend time tracking your 2015 WRX. Mishimoto's direct-fit 2015 WRX oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific CNC-machined aluminum sandwich plate has been designed to allow proper clearance of the stock oil filter. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your 2015 WRX can achieve a +25°F (+13.9°C) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our 2015 WRX parts, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX\u003cbr\u003eProven 20+°F (11.1+°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined aluminum spacer for the oil sandwich plate\u003cbr\u003eSilicone hose bypasses stock liquid-to-liquid heat exchanger\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 25°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets\u003cbr\u003e(1) Application-Specific Oil Sandwich Plate\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings \u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20 x M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Large O-Ring\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is expanding their line of 2015 WRX parts! High oil temperatures can wreak havoc on your high-performance 2015 WRX FA20 DIT. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2015+ Subaru WRX. The 2015 WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock 2015 WRX liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit is designed to work in conjunction with the stock liquid-to-liquid to maintain optimal oil temperature. Properly regulated oil temperatures becomes even more important if you have modified your vehicle or spend time tracking your 2015 WRX. Mishimoto's direct-fit 2015 WRX oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific CNC-machined aluminum sandwich plate has been designed to allow proper clearance of the stock oil filter. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your 2015 WRX can achieve a +25°F (+13.9°C) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our 2015 WRX parts, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561987747867,"title":"Mishimoto - Subaru WRX Thermostatic Oil Cooler Kit - Black - VAG - MMOC-WRX-15TBK","handle":"mishimoto-subaru-wrx-thermostatic-oil-cooler-kit-black-vag-mmoc-wrx-15tbk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-15TBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX\u003cbr\u003eProven 20+°F (11.1+°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined aluminum spacer for the oil sandwich plate\u003cbr\u003eSilicone hose bypasses stock liquid-to-liquid heat exchanger\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 25°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets\u003cbr\u003e(1) Application-Specific Oil Sandwich Plate\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings \u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20 x M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Large O-Ring\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is expanding their line of 2015 WRX parts! High oil temperatures can wreak havoc on your high-performance 2015 WRX FA20 DIT. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2015+ Subaru WRX. The 2015 WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock 2015 WRX liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit is designed to work in conjunction with the stock liquid-to-liquid to maintain optimal oil temperature. Properly regulated oil temperatures becomes even more important if you have modified your vehicle or spend time tracking your 2015 WRX. Mishimoto's direct-fit 2015 WRX oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific CNC-machined aluminum sandwich plate has been designed to allow proper clearance of the stock oil filter. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your 2015 WRX can achieve a +25°F (+13.9°C) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our 2015 WRX parts, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX\u003cbr\u003eProven 20+°F (11.1+°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined aluminum spacer for the oil sandwich plate\u003cbr\u003eSilicone hose bypasses stock liquid-to-liquid heat exchanger\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 25°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets\u003cbr\u003e(1) Application-Specific Oil Sandwich Plate\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings \u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20 x M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Large O-Ring\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is expanding their line of 2015 WRX parts! High oil temperatures can wreak havoc on your high-performance 2015 WRX FA20 DIT. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2015+ Subaru WRX. The 2015 WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock 2015 WRX liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit is designed to work in conjunction with the stock liquid-to-liquid to maintain optimal oil temperature. Properly regulated oil temperatures becomes even more important if you have modified your vehicle or spend time tracking your 2015 WRX. Mishimoto's direct-fit 2015 WRX oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific CNC-machined aluminum sandwich plate has been designed to allow proper clearance of the stock oil filter. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your 2015 WRX can achieve a +25°F (+13.9°C) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our 2015 WRX parts, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:26+08:00","created_at":"2018-01-24T23:24:27+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2014","2015","2016","2017","2018","car-specific","cooling","mishimoto","oil-cooler-kits","oil-coolers","subaru","US1","wrx-s4-vag-applied-a-2014-2015-tc-fa20f-h4","wrx-s4-vag-applied-b-2015-2016-tc-fa20f-h4","wrx-s4-vag-applied-c-2016-2018-tc-fa20f-h4","ws110"],"price":129300,"price_min":129300,"price_max":129300,"available":true,"price_varies":false,"compare_at_price":129200,"compare_at_price_min":129200,"compare_at_price_max":129200,"compare_at_price_varies":false,"variants":[{"id":5990384500763,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-WRX-15TBK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX Thermostatic Oil Cooler Kit - Black - VAG - MMOC-WRX-15TBK","public_title":null,"options":["Default Title"],"price":129300,"weight":9534,"compare_at_price":129200,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-15TBK.jpg?v=1710154082"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-15TBK.jpg?v=1710154082","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX Thermostatic Oil Cooler Kit - Black - VAG - MMOC-WRX-15TBK - Rzcrewgarage","id":1351400357985,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-15TBK.jpg?v=1710154082"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-15TBK.jpg?v=1710154082","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-15TBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX\u003cbr\u003eProven 20+°F (11.1+°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined aluminum spacer for the oil sandwich plate\u003cbr\u003eSilicone hose bypasses stock liquid-to-liquid heat exchanger\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 25°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets\u003cbr\u003e(1) Application-Specific Oil Sandwich Plate\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings \u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20 x M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Large O-Ring\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is expanding their line of 2015 WRX parts! High oil temperatures can wreak havoc on your high-performance 2015 WRX FA20 DIT. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2015+ Subaru WRX. The 2015 WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock 2015 WRX liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit is designed to work in conjunction with the stock liquid-to-liquid to maintain optimal oil temperature. Properly regulated oil temperatures becomes even more important if you have modified your vehicle or spend time tracking your 2015 WRX. Mishimoto's direct-fit 2015 WRX oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific CNC-machined aluminum sandwich plate has been designed to allow proper clearance of the stock oil filter. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your 2015 WRX can achieve a +25°F (+13.9°C) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our 2015 WRX parts, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX\u003cbr\u003eProven 20+°F (11.1+°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined aluminum spacer for the oil sandwich plate\u003cbr\u003eSilicone hose bypasses stock liquid-to-liquid heat exchanger\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 25°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets\u003cbr\u003e(1) Application-Specific Oil Sandwich Plate\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings \u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20 x M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Large O-Ring\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is expanding their line of 2015 WRX parts! High oil temperatures can wreak havoc on your high-performance 2015 WRX FA20 DIT. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2015+ Subaru WRX. The 2015 WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock 2015 WRX liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit is designed to work in conjunction with the stock liquid-to-liquid to maintain optimal oil temperature. Properly regulated oil temperatures becomes even more important if you have modified your vehicle or spend time tracking your 2015 WRX. Mishimoto's direct-fit 2015 WRX oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific CNC-machined aluminum sandwich plate has been designed to allow proper clearance of the stock oil filter. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your 2015 WRX can achieve a +25°F (+13.9°C) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our 2015 WRX parts, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}