Front

{"id":1433321865313,"title":"Spoon Rigid Collar Kit - Front - Mitsubishi Mirage CJ4A (All)","handle":"spoon-rigid-collar-kit-front-mitsubishi-mirage-cj4a-all-50261-cp9-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-CP9-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMirage | CJ4A | 1995-1996 | NA | 4G92 SOHC | I4\u003cbr\u003eMirage | CJ4A | 1996-1997 | NA | 4G92 SOHC | I4\u003cbr\u003eMirage | CJ4A | 1997-2000 | NA | 4G92 SOHC | I4\u003c!--split--\u003e","published_at":"2018-09-23T15:23:44+08:00","created_at":"2018-09-23T15:23:45+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1995","1996","1997","1998","1999","2000","CJ4A (All)","collar-kits","front","jp1","mirage-cj4a-1995-1996-na-4g92-sohc-i4","mirage-cj4a-1996-1997-na-4g92-sohc-i4","mirage-cj4a-1997-2000-na-4g92-sohc-i4","mitsubishi","rigid-collars","spoon","ws17"],"price":20800,"price_min":20800,"price_max":20800,"available":true,"price_varies":false,"compare_at_price":21000,"compare_at_price_min":21000,"compare_at_price_max":21000,"compare_at_price_varies":false,"variants":[{"id":12435579273313,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-CP9-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Mitsubishi Mirage CJ4A (All)","public_title":null,"options":["Default Title"],"price":20800,"weight":1100,"compare_at_price":21000,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_f2d7f88c-922c-4971-95d6-f1e0d3475cab.jpg?v=1710167901"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_f2d7f88c-922c-4971-95d6-f1e0d3475cab.jpg?v=1710167901","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Mitsubishi Mirage CJ4A (All) - 50261-CP9-000 - RZCrewGarage","id":22882180202678,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_f2d7f88c-922c-4971-95d6-f1e0d3475cab.jpg?v=1710167901"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_f2d7f88c-922c-4971-95d6-f1e0d3475cab.jpg?v=1710167901","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-CP9-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMirage | CJ4A | 1995-1996 | NA | 4G92 SOHC | I4\u003cbr\u003eMirage | CJ4A | 1996-1997 | NA | 4G92 SOHC | I4\u003cbr\u003eMirage | CJ4A | 1997-2000 | NA | 4G92 SOHC | I4\u003c!--split--\u003e"}

{"id":1433320063073,"title":"Spoon Rigid Collar Kit - Front - Nissan Bluebird HU14","handle":"spoon-rigid-collar-kit-front-nissan-bluebird-hu14-50261-p10-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-P10-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBluebird | HU14 | 1997-2001 | NA | SR20VE | I4\u003cbr\u003eBluebird | HU14 | 1996-2001 | NA | SR20DE | I4\u003c!--split--\u003e","published_at":"2018-09-23T15:22:25+08:00","created_at":"2018-09-23T15:22:26+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1996","1997","1998","1999","2000","2001","bluebird-hu14-1996-2001-na-sr20de-i4","bluebird-hu14-1997-2001-na-sr20ve-i4","collar-kits","front","HU14","jp1","nissan","rigid-collars","spoon","ws17"],"price":20800,"price_min":20800,"price_max":20800,"available":true,"price_varies":false,"compare_at_price":21000,"compare_at_price_min":21000,"compare_at_price_max":21000,"compare_at_price_varies":false,"variants":[{"id":12435577471073,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-P10-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Nissan Bluebird HU14","public_title":null,"options":["Default Title"],"price":20800,"weight":1100,"compare_at_price":21000,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_9f75e2c5-c667-41d9-b4cb-c675d744695d.jpg?v=1710167867"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_9f75e2c5-c667-41d9-b4cb-c675d744695d.jpg?v=1710167867","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Nissan Bluebird HU14 - 50261-P10-000 - RZCrewGarage","id":22882175975606,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_9f75e2c5-c667-41d9-b4cb-c675d744695d.jpg?v=1710167867"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_9f75e2c5-c667-41d9-b4cb-c675d744695d.jpg?v=1710167867","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-P10-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBluebird | HU14 | 1997-2001 | NA | SR20VE | I4\u003cbr\u003eBluebird | HU14 | 1996-2001 | NA | SR20DE | I4\u003c!--split--\u003e"}

{"id":1433319112801,"title":"Spoon Rigid Collar Kit - Front - Nissan Cedric\/Gloria HY33","handle":"spoon-rigid-collar-kit-front-nissan-cedric-gloria-hy33-50261-f50-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-F50-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCedric\/Gloria | HY33 | 1997-1999 | NA | VQ30DE | V6\u003c!--split--\u003e","published_at":"2018-09-23T15:21:42+08:00","created_at":"2018-09-23T15:21:43+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1997","1998","1999","cedricgloria-hy33-1997-1999-na-vq30de-v6","collar-kits","front","HY33","jp1","nissan","rigid-collars","spoon","ws17"],"price":20800,"price_min":20800,"price_max":20800,"available":true,"price_varies":false,"compare_at_price":21000,"compare_at_price_min":21000,"compare_at_price_max":21000,"compare_at_price_varies":false,"variants":[{"id":12435576520801,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-F50-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Nissan Cedric\/Gloria HY33","public_title":null,"options":["Default Title"],"price":20800,"weight":1100,"compare_at_price":21000,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_609f5437-30e5-4278-ae17-00cd43b2d695.jpg?v=1710167840"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_609f5437-30e5-4278-ae17-00cd43b2d695.jpg?v=1710167840","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Nissan Cedric\/Gloria HY33 - 50261-F50-000 - RZCrewGarage","id":22882173911222,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_609f5437-30e5-4278-ae17-00cd43b2d695.jpg?v=1710167840"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_609f5437-30e5-4278-ae17-00cd43b2d695.jpg?v=1710167840","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-F50-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCedric\/Gloria | HY33 | 1997-1999 | NA | VQ30DE | V6\u003c!--split--\u003e"}

{"id":1433319243873,"title":"Spoon Rigid Collar Kit - Front - Nissan Silvia S14","handle":"spoon-rigid-collar-kit-front-nissan-silvia-s14-50261-s14-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-S14-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | TC | SR20DET | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | TC | SR20DET | I4\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003c!--split--\u003e","published_at":"2018-09-23T15:21:47+08:00","created_at":"2018-09-23T15:21:48+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1993","1994","1995","1996","1997","1998","collar-kits","front","jp1","nissan","rigid-collars","S14","silvia-s14-kouki-1996-1998-na-sr20de-i4","silvia-s14-kouki-1996-1998-tc-sr20det-i4","silvia-s14-zenki-1993-1996-na-sr20de-i4","silvia-s14-zenki-1993-1996-tc-sr20det-i4","spoon","ws17"],"price":20800,"price_min":20800,"price_max":20800,"available":true,"price_varies":false,"compare_at_price":21000,"compare_at_price_min":21000,"compare_at_price_max":21000,"compare_at_price_varies":false,"variants":[{"id":12435576651873,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-S14-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Nissan Silvia S14","public_title":null,"options":["Default Title"],"price":20800,"weight":1100,"compare_at_price":21000,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_c3cc88f3-04cd-4bef-8324-457ad5bae8d2.jpg?v=1710167849"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_c3cc88f3-04cd-4bef-8324-457ad5bae8d2.jpg?v=1710167849","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Nissan Silvia S14 - 50261-S14-000 - RZCrewGarage","id":22882174238902,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_c3cc88f3-04cd-4bef-8324-457ad5bae8d2.jpg?v=1710167849"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_c3cc88f3-04cd-4bef-8324-457ad5bae8d2.jpg?v=1710167849","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-S14-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | TC | SR20DET | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | TC | SR20DET | I4\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003c!--split--\u003e"}

{"id":1433318719585,"title":"Spoon Rigid Collar Kit - Front - Nissan Wingroad WFY10","handle":"spoon-rigid-collar-kit-front-nissan-wingroad-wfy10-50261-y10-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-Y10-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eWingroad | WFY10 | 1997-1999 | NA | GA15DE | I4\u003c!--split--\u003e","published_at":"2018-09-23T15:21:25+08:00","created_at":"2018-09-23T15:21:26+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1997","1998","1999","collar-kits","front","jp1","nissan","rigid-collars","spoon","WFY10","wingroad-wfy10-1997-1999-na-ga15de-i4","ws17"],"price":20800,"price_min":20800,"price_max":20800,"available":true,"price_varies":false,"compare_at_price":21000,"compare_at_price_min":21000,"compare_at_price_max":21000,"compare_at_price_varies":false,"variants":[{"id":12435576127585,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-Y10-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Nissan Wingroad WFY10","public_title":null,"options":["Default Title"],"price":20800,"weight":1100,"compare_at_price":21000,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_766cde94-0e3b-4278-be8e-9e3069cfcd55.jpg?v=1710167835"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_766cde94-0e3b-4278-be8e-9e3069cfcd55.jpg?v=1710167835","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Nissan Wingroad WFY10 - 50261-Y10-000 - RZCrewGarage","id":22882172567734,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_766cde94-0e3b-4278-be8e-9e3069cfcd55.jpg?v=1710167835"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_766cde94-0e3b-4278-be8e-9e3069cfcd55.jpg?v=1710167835","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-Y10-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eWingroad | WFY10 | 1997-1999 | NA | GA15DE | I4\u003c!--split--\u003e"}

{"id":1433317900385,"title":"Spoon Rigid Collar Kit - Front - Toyota Celsior UCF20","handle":"spoon-rigid-collar-kit-front-toyota-celsior-ucf20-50261-ucf-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-UCF-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCelsior | UCF20 | 1994-2000 | NA | 1UZ-FE | V8\u003c!--split--\u003e","published_at":"2018-09-23T15:20:51+08:00","created_at":"2018-09-23T15:20:52+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1994","1995","1996","1997","1998","1999","2000","celsior-ucf20-1994-2000-na-1uz-fe-v8","collar-kits","front","jp1","rigid-collars","spoon","toyota","UCF20","ws17"],"price":20800,"price_min":20800,"price_max":20800,"available":true,"price_varies":false,"compare_at_price":21000,"compare_at_price_min":21000,"compare_at_price_max":21000,"compare_at_price_varies":false,"variants":[{"id":12435575341153,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-UCF-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Toyota Celsior UCF20","public_title":null,"options":["Default Title"],"price":20800,"weight":1100,"compare_at_price":21000,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_2f1732c0-cd2e-4b49-8692-effa825d2361.jpg?v=1710167816"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_2f1732c0-cd2e-4b49-8692-effa825d2361.jpg?v=1710167816","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Toyota Celsior UCF20 - 50261-UCF-000 - RZCrewGarage","id":22882170175670,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_2f1732c0-cd2e-4b49-8692-effa825d2361.jpg?v=1710167816"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_2f1732c0-cd2e-4b49-8692-effa825d2361.jpg?v=1710167816","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-UCF-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCelsior | UCF20 | 1994-2000 | NA | 1UZ-FE | V8\u003c!--split--\u003e"}

{"id":1433317507169,"title":"Spoon Rigid Collar Kit - Front - Toyota Crown Majesta UZS151","handle":"spoon-rigid-collar-kit-front-toyota-crown-majesta-uzs151-50261-151-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-151-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCrown Majesta | UZS151 | 1995-2001 | NA | 1UZ-FE | V8\u003c!--split--\u003e","published_at":"2018-09-23T15:20:33+08:00","created_at":"2018-09-23T15:20:34+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1995","1996","1997","1998","1999","2000","2001","collar-kits","crown-majesta-uzs151-1995-2001-na-1uz-fe-v8","front","jp1","rigid-collars","spoon","toyota","UZS151","ws17"],"price":20800,"price_min":20800,"price_max":20800,"available":true,"price_varies":false,"compare_at_price":21000,"compare_at_price_min":21000,"compare_at_price_max":21000,"compare_at_price_varies":false,"variants":[{"id":12435574947937,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-151-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Toyota Crown Majesta UZS151","public_title":null,"options":["Default Title"],"price":20800,"weight":1100,"compare_at_price":21000,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_32df4799-09d4-494b-8efd-c60d3d1ee066.jpg?v=1710167812"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_32df4799-09d4-494b-8efd-c60d3d1ee066.jpg?v=1710167812","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Toyota Crown Majesta UZS151 - 50261-151-000 - RZCrewGarage","id":22882168242358,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_32df4799-09d4-494b-8efd-c60d3d1ee066.jpg?v=1710167812"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_32df4799-09d4-494b-8efd-c60d3d1ee066.jpg?v=1710167812","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-151-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCrown Majesta | UZS151 | 1995-2001 | NA | 1UZ-FE | V8\u003c!--split--\u003e"}

{"id":1433317703777,"title":"Spoon Rigid Collar Kit - Front - Toyota Mark II Chaser Cresta JZX100","handle":"spoon-rigid-collar-kit-front-toyota-mark-ii-chaser-cresta-jzx100-50261-x10-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-X10-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMark II Chaser Cresta | JZX100 (1JZ-GTE) | 1996-2000 | TT | 1JZ-GTE | I6\u003cbr\u003eMark II Chaser Cresta | JZX100 (1JZ-GE) | 1996-2000 | NA | 1JZ-GE | I6\u003c!--split--\u003e","published_at":"2018-09-23T15:20:43+08:00","created_at":"2018-09-23T15:20:44+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1996","1997","1998","1999","2000","collar-kits","front","jp1","JZX100","mark-ii-chaser-cresta-jzx100-1jz-ge-1996-2000-na-1jz-ge-i6","mark-ii-chaser-cresta-jzx100-1jz-gte-1996-2000-tt-1jz-gte-i6","rigid-collars","spoon","toyota","ws17"],"price":20800,"price_min":20800,"price_max":20800,"available":true,"price_varies":false,"compare_at_price":21000,"compare_at_price_min":21000,"compare_at_price_max":21000,"compare_at_price_varies":false,"variants":[{"id":12435575144545,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-X10-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Toyota Mark II Chaser Cresta JZX100","public_title":null,"options":["Default Title"],"price":20800,"weight":1100,"compare_at_price":21000,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_8a481f06-a767-45df-9b88-cd23a0187683.jpg?v=1710167814"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_8a481f06-a767-45df-9b88-cd23a0187683.jpg?v=1710167814","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Toyota Mark II Chaser Cresta JZX100 - 50261-X10-000 - RZCrewGarage","id":22882169258166,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_8a481f06-a767-45df-9b88-cd23a0187683.jpg?v=1710167814"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_8a481f06-a767-45df-9b88-cd23a0187683.jpg?v=1710167814","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-X10-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMark II Chaser Cresta | JZX100 (1JZ-GTE) | 1996-2000 | TT | 1JZ-GTE | I6\u003cbr\u003eMark II Chaser Cresta | JZX100 (1JZ-GE) | 1996-2000 | NA | 1JZ-GE | I6\u003c!--split--\u003e"}

{"id":1433316622433,"title":"Spoon Rigid Collar Kit - Front - Toyota MR-2 SW20 Na\/T","handle":"spoon-rigid-collar-kit-front-toyota-mr-2-sw20-na-t-50261-sw2-1000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-SW2-1000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMR-2 | SW20 | 1989-1999 | TC | 3S-GTE | I4\u003cbr\u003eMR-2 | SW20 | 1989-1999 | NA | 3S-GE | I4\u003c!--split--\u003e","published_at":"2018-09-23T15:19:49+08:00","created_at":"2018-09-23T15:19:50+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","collar-kits","front","jp1","mr-2-sw20-1989-1999-na-3s-ge-i4","mr-2-sw20-1989-1999-tc-3s-gte-i4","rigid-collars","spoon","SW20 Na\/T","toyota","ws17"],"price":20800,"price_min":20800,"price_max":20800,"available":true,"price_varies":false,"compare_at_price":21000,"compare_at_price_min":21000,"compare_at_price_max":21000,"compare_at_price_varies":false,"variants":[{"id":12435574063201,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-SW2-1000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Toyota MR-2 SW20 Na\/T","public_title":null,"options":["Default Title"],"price":20800,"weight":1100,"compare_at_price":21000,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_2cf97543-3621-4691-bc86-e7db62212640.jpg?v=1710167785"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_2cf97543-3621-4691-bc86-e7db62212640.jpg?v=1710167785","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Toyota MR-2 SW20 Na\/T - 50261-SW2-1000 - RZCrewGarage","id":22882165457078,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_2cf97543-3621-4691-bc86-e7db62212640.jpg?v=1710167785"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_2cf97543-3621-4691-bc86-e7db62212640.jpg?v=1710167785","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-SW2-1000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMR-2 | SW20 | 1989-1999 | TC | 3S-GTE | I4\u003cbr\u003eMR-2 | SW20 | 1989-1999 | NA | 3S-GE | I4\u003c!--split--\u003e"}

{"id":1433317769313,"title":"Spoon Rigid Collar Kit - Front - Toyota Supra JZA80","handle":"spoon-rigid-collar-kit-front-toyota-supra-jza80-50261-a80-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-A80-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSupra | JZA80 TT | 1993-2002 | TT | 2JZ-GTE | I6\u003cbr\u003eSupra | JZA80 NA | 1993-2002 | NA | 2JZ-GE | I6\u003c!--split--\u003e","published_at":"2018-09-23T15:20:45+08:00","created_at":"2018-09-23T15:20:46+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","collar-kits","front","jp1","JZA80","rigid-collars","spoon","supra-jza80-na-1993-2002-na-2jz-ge-i6","supra-jza80-tt-1993-2002-tt-2jz-gte-i6","toyota","ws17"],"price":20800,"price_min":20800,"price_max":20800,"available":true,"price_varies":false,"compare_at_price":21000,"compare_at_price_min":21000,"compare_at_price_max":21000,"compare_at_price_varies":false,"variants":[{"id":12435575210081,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-A80-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Toyota Supra JZA80","public_title":null,"options":["Default Title"],"price":20800,"weight":1100,"compare_at_price":21000,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_f1733a8a-fba1-4216-a393-ba5d7143d4d3.jpg?v=1710167814"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_f1733a8a-fba1-4216-a393-ba5d7143d4d3.jpg?v=1710167814","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Toyota Supra JZA80 - 50261-A80-000 - RZCrewGarage","id":22882169585846,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_f1733a8a-fba1-4216-a393-ba5d7143d4d3.jpg?v=1710167814"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_f1733a8a-fba1-4216-a393-ba5d7143d4d3.jpg?v=1710167814","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-A80-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSupra | JZA80 TT | 1993-2002 | TT | 2JZ-GTE | I6\u003cbr\u003eSupra | JZA80 NA | 1993-2002 | NA | 2JZ-GE | I6\u003c!--split--\u003e"}

{"id":410899218459,"title":"Spoon Twin-Block Caliper Set - Honda - Civic EK4","handle":"spoon-twin-block-caliper-set-ek4-45020-dcr-g00","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePosition: Front\u003cbr\u003eRotors Diameter: Stock Rotor\u003cbr\u003e\u003cbr\u003eThe Spoon 4-pot caliper has been specifically designed and tested for Honda applications. Unlike other 4-pot calipers, Spoon calipers are direct fit and are designed to work with the stock brake system, including the ABS. Spoon calipers use stock Honda size brake pads, which gives users incredible flexibility in choosing pads. The 4-pot calipers significantly improve both high speed braking and brake pedal feel and its consistency during track use.\u003cbr\u003eThe 4-pot design also makes pad wear more even and minimizes rotor warpage. The aluminium construction also helps reduce un-sprung weight significantly. These benefits are achieved while maintaining a stock feel for daily driving.\u003cbr\u003eSpoon calipers are manufactured by Nissin, the OE supplier of all Honda brakes. The twin-block caliper was developed over a year specifically for the EK9 Civic Type R and DC2 Integra Type R.\u003cbr\u003ePLEASE NOTE: When installing Twin Block Calipers to the Civic EG, EK and 96 Spec DC2 a pair of Spoon 15\" Brake Rotors, Long Hub Bolts and 3mm wheel spacers are required. Due to the addition width of the caliper to accommodate the 4 piston arrangement it may interfere with the wheel. Please check with wheel manufacture for clearance.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic | EK4 | 1995-2000 | NA | B16A | I4\u003c!--split--\u003e","published_at":"2017-12-06T14:57:17+08:00","created_at":"2017-12-06T14:57:18+08:00","vendor":"Spoon","type":"Brake Calipers and Kits","tags":["1995","1996","1997","1998","1999","2000","brake-calipers-and-kits","civic-ek4-1995-2000-na-b16a-i4","front","honda","JP1","spoon","stock-rotor","ws17"],"price":146370,"price_min":146370,"price_max":202770,"available":true,"price_varies":true,"compare_at_price":147600,"compare_at_price_min":147600,"compare_at_price_max":204600,"compare_at_price_varies":true,"variants":[{"id":32130622226529,"title":"No \/ No \/ No","option1":"No","option2":"No","option3":"No","sku":"45020-DCR-G00","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Twin-Block Caliper Set - Honda - Civic EK4 - No \/ No \/ No","public_title":"No \/ No \/ No","options":["No","No","No"],"price":146370,"weight":8000,"compare_at_price":147600,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32130622292065,"title":"Yes \/ No \/ No","option1":"Yes","option2":"No","option3":"No","sku":"45020-DCR-G00 + 45251-4H1014","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Twin-Block Caliper Set - Honda - Civic EK4 - Yes \/ No \/ No","public_title":"Yes \/ No \/ No","options":["Yes","No","No"],"price":175540,"weight":20000,"compare_at_price":177100,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32130622357601,"title":"Yes \/ Yes \/ No","option1":"Yes","option2":"Yes","option3":"No","sku":"45020-DCR-G00 + 45251-4H1014 + 45250-T03AL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Twin-Block Caliper Set - Honda - Civic EK4 - Yes \/ Yes \/ No","public_title":"Yes \/ Yes \/ No","options":["Yes","Yes","No"],"price":181370,"weight":20000,"compare_at_price":183000,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32130622423137,"title":"Yes \/ No \/ Yes","option1":"Yes","option2":"No","option3":"Yes","sku":"45020-DCR-G00 + 45251-4H1014 + 45022-EG6-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Twin-Block Caliper Set - Honda - Civic EK4 - Yes \/ No \/ Yes","public_title":"Yes \/ No \/ Yes","options":["Yes","No","Yes"],"price":196930,"weight":22000,"compare_at_price":198700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32130622488673,"title":"Yes \/ Yes \/ Yes","option1":"Yes","option2":"Yes","option3":"Yes","sku":"45020-DCR-G00 + 45251-4H1014 + 45250-T03AL + 45022-EG6-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Twin-Block Caliper Set - Honda - Civic EK4 - Yes \/ Yes \/ Yes","public_title":"Yes \/ Yes \/ Yes","options":["Yes","Yes","Yes"],"price":202770,"weight":22000,"compare_at_price":204600,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32130622586977,"title":"No \/ Yes \/ No","option1":"No","option2":"Yes","option3":"No","sku":"45020-DCR-G00 + 45250-T03AL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Twin-Block Caliper Set - Honda - Civic EK4 - No \/ Yes \/ No","public_title":"No \/ Yes \/ No","options":["No","Yes","No"],"price":152200,"weight":8000,"compare_at_price":153500,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32130622685281,"title":"No \/ Yes \/ Yes","option1":"No","option2":"Yes","option3":"Yes","sku":"45020-DCR-G00 + 45250-T03AL + 45022-EG6-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Twin-Block Caliper Set - Honda - Civic EK4 - No \/ Yes \/ Yes","public_title":"No \/ Yes \/ Yes","options":["No","Yes","Yes"],"price":173600,"weight":10000,"compare_at_price":175100,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32130622783585,"title":"No \/ No \/ Yes","option1":"No","option2":"No","option3":"Yes","sku":"45020-DCR-G00 + 45022-EG6-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Twin-Block Caliper Set - Honda - Civic EK4 - No \/ No \/ Yes","public_title":"No \/ No \/ Yes","options":["No","No","Yes"],"price":167760,"weight":10000,"compare_at_price":169200,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-DCR-G00_a9a769c4-2fe3-4b31-8433-e7348879992b.jpg?v=1710149278","\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-DCR-G00_45251-4H1014_d1e91824-a37d-4522-97b2-e866614de678.jpg?v=1710149280","\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-DCR-G00_45250-T03AL.jpg?v=1710149281","\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-DCR-G00_45022-EG6-000_534cc08b-664b-40ee-b39a-adf57cf1c8b2.jpg?v=1710149283"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-DCR-G00_a9a769c4-2fe3-4b31-8433-e7348879992b.jpg?v=1710149278","options":["Brake Rotors","Spacers","Brake Pads"],"media":[{"alt":"45020-DCR-G00 + 45022-EG6-000 - Rzcrewgarage","id":25428600357046,"position":1,"preview_image":{"aspect_ratio":1.5,"height":1489,"width":2234,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-DCR-G00_a9a769c4-2fe3-4b31-8433-e7348879992b.jpg?v=1710149278"},"aspect_ratio":1.5,"height":1489,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-DCR-G00_a9a769c4-2fe3-4b31-8433-e7348879992b.jpg?v=1710149278","width":2234},{"alt":"45020-DCR-G00 + 45251-4H1014 - Rzcrewgarage","id":25428600389814,"position":2,"preview_image":{"aspect_ratio":1.012,"height":690,"width":698,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-DCR-G00_45251-4H1014_d1e91824-a37d-4522-97b2-e866614de678.jpg?v=1710149280"},"aspect_ratio":1.012,"height":690,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-DCR-G00_45251-4H1014_d1e91824-a37d-4522-97b2-e866614de678.jpg?v=1710149280","width":698},{"alt":"45020-DCR-G00 + 45251-4H1014 + 45250-T03AL - Rzcrewgarage","id":25428600422582,"position":3,"preview_image":{"aspect_ratio":1.501,"height":931,"width":1397,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-DCR-G00_45250-T03AL.jpg?v=1710149281"},"aspect_ratio":1.501,"height":931,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-DCR-G00_45250-T03AL.jpg?v=1710149281","width":1397},{"alt":"45020-DCR-G00 + 45251-4H1014 + 45022-EG6-000 - Rzcrewgarage","id":25428600455350,"position":4,"preview_image":{"aspect_ratio":1.171,"height":689,"width":807,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-DCR-G00_45022-EG6-000_534cc08b-664b-40ee-b39a-adf57cf1c8b2.jpg?v=1710149283"},"aspect_ratio":1.171,"height":689,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-DCR-G00_45022-EG6-000_534cc08b-664b-40ee-b39a-adf57cf1c8b2.jpg?v=1710149283","width":807}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePosition: Front\u003cbr\u003eRotors Diameter: Stock Rotor\u003cbr\u003e\u003cbr\u003eThe Spoon 4-pot caliper has been specifically designed and tested for Honda applications. Unlike other 4-pot calipers, Spoon calipers are direct fit and are designed to work with the stock brake system, including the ABS. Spoon calipers use stock Honda size brake pads, which gives users incredible flexibility in choosing pads. The 4-pot calipers significantly improve both high speed braking and brake pedal feel and its consistency during track use.\u003cbr\u003eThe 4-pot design also makes pad wear more even and minimizes rotor warpage. The aluminium construction also helps reduce un-sprung weight significantly. These benefits are achieved while maintaining a stock feel for daily driving.\u003cbr\u003eSpoon calipers are manufactured by Nissin, the OE supplier of all Honda brakes. The twin-block caliper was developed over a year specifically for the EK9 Civic Type R and DC2 Integra Type R.\u003cbr\u003ePLEASE NOTE: When installing Twin Block Calipers to the Civic EG, EK and 96 Spec DC2 a pair of Spoon 15\" Brake Rotors, Long Hub Bolts and 3mm wheel spacers are required. Due to the addition width of the caliper to accommodate the 4 piston arrangement it may interfere with the wheel. Please check with wheel manufacture for clearance.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic | EK4 | 1995-2000 | NA | B16A | I4\u003c!--split--\u003e"}

{"id":410899316763,"title":"Spoon Twin-Block Caliper Set - Honda - Civic Type R EK9","handle":"spoon-twin-block-caliper-set-ek9-45020-dcr-g00","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePosition: Front\u003cbr\u003eRotors Diameter: Stock Rotor\u003cbr\u003e\u003cbr\u003eThe Spoon 4-pot caliper has been specifically designed and tested for Honda applications. Unlike other 4-pot calipers, Spoon calipers are direct fit and are designed to work with the stock brake system, including the ABS. Spoon calipers use stock Honda size brake pads, which gives users incredible flexibility in choosing pads. The 4-pot calipers significantly improve both high speed braking and brake pedal feel and its consistency during track use.\u003cbr\u003eThe 4-pot design also makes pad wear more even and minimizes rotor warpage. The aluminium construction also helps reduce un-sprung weight significantly. These benefits are achieved while maintaining a stock feel for daily driving.\u003cbr\u003eSpoon calipers are manufactured by Nissin, the OE supplier of all Honda brakes. The twin-block caliper was developed over a year specifically for the EK9 Civic Type R and DC2 Integra Type R.\u003cbr\u003ePLEASE NOTE: When installing Twin Block Calipers to the Civic EG, EK and 96 Spec DC2 a pair of Spoon 15\" Brake Rotors, Long Hub Bolts and 3mm wheel spacers are required. Due to the addition width of the caliper to accommodate the 4 piston arrangement it may interfere with the wheel. Please check with wheel manufacture for clearance.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R | EK9 | 1997-2000 | NA | B16B | I4\u003c!--split--\u003e","published_at":"2017-12-06T14:57:18+08:00","created_at":"2017-12-06T14:57:19+08:00","vendor":"Spoon","type":"Brake Calipers and Kits","tags":["1997","1998","1999","2000","brake-calipers-and-kits","civic-type-r-ek9-1997-2000-na-b16b-i4","front","honda","JP1","spoon","stock-rotor","ws17"],"price":146160,"price_min":146160,"price_max":167760,"available":true,"price_varies":true,"compare_at_price":147600,"compare_at_price_min":147600,"compare_at_price_max":169200,"compare_at_price_varies":true,"variants":[{"id":32130623996001,"title":"No","option1":"No","option2":null,"option3":null,"sku":"45020-DCR-G00","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Twin-Block Caliper Set - Honda - Civic Type R EK9 - No","public_title":"No","options":["No"],"price":146160,"weight":8000,"compare_at_price":147600,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32130624028769,"title":"Yes","option1":"Yes","option2":null,"option3":null,"sku":"45020-DCR-G00 + 45022-EK9-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Twin-Block Caliper Set - Honda - Civic Type R EK9 - Yes","public_title":"Yes","options":["Yes"],"price":167760,"weight":10000,"compare_at_price":169200,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-DCR-G00_b3f70614-5df4-41c6-bfb9-832f33e33190.jpg?v=1710149275","\/\/rzcrewgarage.com\/cdn\/shop\/products\/45251-EK9-000_038af6c7-c2b5-45a4-bc8b-40dbe28a094b.jpg?v=1710149278"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-DCR-G00_b3f70614-5df4-41c6-bfb9-832f33e33190.jpg?v=1710149275","options":["Brake Pads"],"media":[{"alt":"45020-DCR-G00 - Rzcrewgarage","id":25428600586422,"position":1,"preview_image":{"aspect_ratio":1.5,"height":1489,"width":2234,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-DCR-G00_b3f70614-5df4-41c6-bfb9-832f33e33190.jpg?v=1710149275"},"aspect_ratio":1.5,"height":1489,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-DCR-G00_b3f70614-5df4-41c6-bfb9-832f33e33190.jpg?v=1710149275","width":2234},{"alt":"45020-DCR-G00 + 45022-EK9-000 - Rzcrewgarage","id":25428600619190,"position":2,"preview_image":{"aspect_ratio":1.5,"height":540,"width":810,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45251-EK9-000_038af6c7-c2b5-45a4-bc8b-40dbe28a094b.jpg?v=1710149278"},"aspect_ratio":1.5,"height":540,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45251-EK9-000_038af6c7-c2b5-45a4-bc8b-40dbe28a094b.jpg?v=1710149278","width":810}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePosition: Front\u003cbr\u003eRotors Diameter: Stock Rotor\u003cbr\u003e\u003cbr\u003eThe Spoon 4-pot caliper has been specifically designed and tested for Honda applications. Unlike other 4-pot calipers, Spoon calipers are direct fit and are designed to work with the stock brake system, including the ABS. Spoon calipers use stock Honda size brake pads, which gives users incredible flexibility in choosing pads. The 4-pot calipers significantly improve both high speed braking and brake pedal feel and its consistency during track use.\u003cbr\u003eThe 4-pot design also makes pad wear more even and minimizes rotor warpage. The aluminium construction also helps reduce un-sprung weight significantly. These benefits are achieved while maintaining a stock feel for daily driving.\u003cbr\u003eSpoon calipers are manufactured by Nissin, the OE supplier of all Honda brakes. The twin-block caliper was developed over a year specifically for the EK9 Civic Type R and DC2 Integra Type R.\u003cbr\u003ePLEASE NOTE: When installing Twin Block Calipers to the Civic EG, EK and 96 Spec DC2 a pair of Spoon 15\" Brake Rotors, Long Hub Bolts and 3mm wheel spacers are required. Due to the addition width of the caliper to accommodate the 4 piston arrangement it may interfere with the wheel. Please check with wheel manufacture for clearance.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R | EK9 | 1997-2000 | NA | B16B | I4\u003c!--split--\u003e"}

{"id":4593508581473,"title":"Spoon Twin-Block Caliper Set - Honda - Integra type R DC2\/DB8","handle":"spoon-twin-block-caliper-set-dc2-db8-45020-dcr-g00","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePosition: Front\u003cbr\u003eRotors Diameter: Stock Rotor\u003cbr\u003e\u003cbr\u003eThe Spoon 4-pot caliper has been specifically designed and tested for Honda applications. Unlike other 4-pot calipers, Spoon calipers are direct fit and are designed to work with the stock brake system, including the ABS. Spoon calipers use stock Honda size brake pads, which gives users incredible flexibility in choosing pads. The 4-pot calipers significantly improve both high speed braking and brake pedal feel and its consistency during track use.\u003cbr\u003eThe 4-pot design also makes pad wear more even and minimizes rotor warpage. The aluminium construction also helps reduce un-sprung weight significantly. These benefits are achieved while maintaining a stock feel for daily driving.\u003cbr\u003eSpoon calipers are manufactured by Nissin, the OE supplier of all Honda brakes. The twin-block caliper was developed over a year specifically for the EK9 Civic Type R and DC2 Integra Type R.\u003cbr\u003ePLEASE NOTE: When installing Twin Block Calipers to the Civic EG, EK and 96 Spec DC2 a pair of Spoon 15\" Brake Rotors, Long Hub Bolts and 3mm wheel spacers are required. Due to the addition width of the caliper to accommodate the 4 piston arrangement it may interfere with the wheel. Please check with wheel manufacture for clearance.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eIntegra type R | DB8 | 1996-2001 | NA | B18C | I4,Integra type R | DC2 Zenki | 1996-1998 | NA | B18C | I4,Integra type R | DC2 Kouki | 1998-2001 | NA | B18C | I4\u003c!--split--\u003e","published_at":"2020-04-28T16:15:21+08:00","created_at":"2020-04-28T16:15:23+08:00","vendor":"Spoon","type":"Brake Calipers and Kits","tags":["1996","1997","1998","1999","2000","2001","brake-calipers-and-kits","front","honda","integra-type-r-db8-1996-2001-na-b18c-i4","integra-type-r-dc2-kouki-1998-2001-na-b18c-i4","integra-type-r-dc2-zenki-1996-1998-na-b18c-i4","JP1","spoon","stock-rotor","ws17"],"price":146160,"price_min":146160,"price_max":167760,"available":true,"price_varies":true,"compare_at_price":147600,"compare_at_price_min":147600,"compare_at_price_max":169200,"compare_at_price_varies":true,"variants":[{"id":32130624553057,"title":"No","option1":"No","option2":null,"option3":null,"sku":"45020-DCR-G00","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Twin-Block Caliper Set - Honda - Integra type R DC2\/DB8 - No","public_title":"No","options":["No"],"price":146160,"weight":8000,"compare_at_price":147600,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32130624585825,"title":"Yes","option1":"Yes","option2":null,"option3":null,"sku":"45020-DCR-G00 + 45022-EK9-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Twin-Block Caliper Set - Honda - Integra type R DC2\/DB8 - Yes","public_title":"Yes","options":["Yes"],"price":167760,"weight":10000,"compare_at_price":169200,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-DCR-G00_d3c4ab3d-e453-41aa-8a54-0adf958dde77.jpg?v=1710191554","\/\/rzcrewgarage.com\/cdn\/shop\/products\/45251-EK9-000_73f22598-099c-413f-8ebd-a0f7a139aedf.jpg?v=1710191555"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-DCR-G00_d3c4ab3d-e453-41aa-8a54-0adf958dde77.jpg?v=1710191554","options":["Brake Pads"],"media":[{"alt":"45020-DCR-G00 - Rzcrewgarage","id":25428601798838,"position":1,"preview_image":{"aspect_ratio":1.5,"height":1489,"width":2234,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-DCR-G00_d3c4ab3d-e453-41aa-8a54-0adf958dde77.jpg?v=1710191554"},"aspect_ratio":1.5,"height":1489,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-DCR-G00_d3c4ab3d-e453-41aa-8a54-0adf958dde77.jpg?v=1710191554","width":2234},{"alt":"45020-DCR-G00 + 45022-EK9-000 - Rzcrewgarage","id":25428601864374,"position":2,"preview_image":{"aspect_ratio":1.5,"height":540,"width":810,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45251-EK9-000_73f22598-099c-413f-8ebd-a0f7a139aedf.jpg?v=1710191555"},"aspect_ratio":1.5,"height":540,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45251-EK9-000_73f22598-099c-413f-8ebd-a0f7a139aedf.jpg?v=1710191555","width":810}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePosition: Front\u003cbr\u003eRotors Diameter: Stock Rotor\u003cbr\u003e\u003cbr\u003eThe Spoon 4-pot caliper has been specifically designed and tested for Honda applications. Unlike other 4-pot calipers, Spoon calipers are direct fit and are designed to work with the stock brake system, including the ABS. Spoon calipers use stock Honda size brake pads, which gives users incredible flexibility in choosing pads. The 4-pot calipers significantly improve both high speed braking and brake pedal feel and its consistency during track use.\u003cbr\u003eThe 4-pot design also makes pad wear more even and minimizes rotor warpage. The aluminium construction also helps reduce un-sprung weight significantly. These benefits are achieved while maintaining a stock feel for daily driving.\u003cbr\u003eSpoon calipers are manufactured by Nissin, the OE supplier of all Honda brakes. The twin-block caliper was developed over a year specifically for the EK9 Civic Type R and DC2 Integra Type R.\u003cbr\u003ePLEASE NOTE: When installing Twin Block Calipers to the Civic EG, EK and 96 Spec DC2 a pair of Spoon 15\" Brake Rotors, Long Hub Bolts and 3mm wheel spacers are required. Due to the addition width of the caliper to accommodate the 4 piston arrangement it may interfere with the wheel. Please check with wheel manufacture for clearance.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eIntegra type R | DB8 | 1996-2001 | NA | B18C | I4,Integra type R | DC2 Zenki | 1996-1998 | NA | B18C | I4,Integra type R | DC2 Kouki | 1998-2001 | NA | B18C | I4\u003c!--split--\u003e"}

{"id":3856187293793,"title":"Super Rigid Subframe Collar Kit - Front 10 Pieces - Honda Civic EK(All)","handle":"super-rigid-sr-c-116-ekall","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-116\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 10 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic | EK2 | 1995-2000 | NA | D13B1 | I4\u003cbr\u003eCivic | EK3 | 1995-2000 | NA | D15B | I4\u003cbr\u003eCivic | EK4 | 1995-2000 | NA | B16A | I4\u003cbr\u003eCivic Type R | EK9 | 1997-2000 | NA | B16B | I4\u003cbr\u003eCivic Ferio | EK2 | 1995-2000 | NA | D13B1 | I4\u003cbr\u003eCivic Ferio | EK3 | 1995-2000 | NA | D15B | I4\u003cbr\u003eCivic Ferio | EK4 | 1995-2000 | NA | B16A | I4\u003c!--split--\u003e","published_at":"2019-06-19T14:23:32+08:00","created_at":"2019-06-19T14:23:34+08:00","vendor":"Super Rigid","type":"Collar Kits","tags":["1995","1996","1997","1998","1999","2000","civic-ek2-1995-2000-na-d13b1-i4","civic-ek3-1995-2000-na-d15b-i4","civic-ek4-1995-2000-na-b16a-i4","civic-ferio-ek2-1995-2000-na-d13b1-i4","civic-ferio-ek3-1995-2000-na-d15b-i4","civic-ferio-ek4-1995-2000-na-b16a-i4","civic-type-r-ek9-1997-2000-na-b16b-i4","collar-kits","front","honda","rigid-collars","sg1","super-rigid","ws140"],"price":11870,"price_min":11870,"price_max":11870,"available":true,"price_varies":false,"compare_at_price":14900,"compare_at_price_min":14900,"compare_at_price_max":14900,"compare_at_price_varies":false,"variants":[{"id":29164327370849,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SR-C-116","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Super Rigid Subframe Collar Kit - Front 10 Pieces - Honda Civic EK(All)","public_title":null,"options":["Default Title"],"price":11870,"weight":510,"compare_at_price":14900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid_9e44490d-3876-4a2e-bdc9-d24cf08d4c44.jpg?v=1731400034"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid_9e44490d-3876-4a2e-bdc9-d24cf08d4c44.jpg?v=1731400034","options":["Title"],"media":[{"alt":"Super-Rigid-SR-C-116-EK(All) - RZCrewGarage","id":28768901267638,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1400,"width":1400,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid_9e44490d-3876-4a2e-bdc9-d24cf08d4c44.jpg?v=1731400034"},"aspect_ratio":1.0,"height":1400,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid_9e44490d-3876-4a2e-bdc9-d24cf08d4c44.jpg?v=1731400034","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-116\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 10 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic | EK2 | 1995-2000 | NA | D13B1 | I4\u003cbr\u003eCivic | EK3 | 1995-2000 | NA | D15B | I4\u003cbr\u003eCivic | EK4 | 1995-2000 | NA | B16A | I4\u003cbr\u003eCivic Type R | EK9 | 1997-2000 | NA | B16B | I4\u003cbr\u003eCivic Ferio | EK2 | 1995-2000 | NA | D13B1 | I4\u003cbr\u003eCivic Ferio | EK3 | 1995-2000 | NA | D15B | I4\u003cbr\u003eCivic Ferio | EK4 | 1995-2000 | NA | B16A | I4\u003c!--split--\u003e"}

{"id":3856189390945,"title":"Super Rigid Subframe Collar Kit - Front 10 Pieces - Honda Integra type R DB8","handle":"super-rigid-sr-c-156-db8","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-156\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 10 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eIntegra type R | DB8 | 1996-2001 | NA | B18C | I4\u003c!--split--\u003e","published_at":"2019-06-19T14:25:14+08:00","created_at":"2019-06-19T14:25:16+08:00","vendor":"Super Rigid","type":"Collar Kits","tags":["1996","1997","1998","1999","2000","2001","collar-kits","front","honda","integra-type-r-db8-1996-2001-na-b18c-i4","rigid-collars","sg1","super-rigid","ws140"],"price":11870,"price_min":11870,"price_max":11870,"available":true,"price_varies":false,"compare_at_price":14900,"compare_at_price_min":14900,"compare_at_price_max":14900,"compare_at_price_varies":false,"variants":[{"id":29164340576353,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SR-C-156","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Super Rigid Subframe Collar Kit - Front 10 Pieces - Honda Integra type R DB8","public_title":null,"options":["Default Title"],"price":11870,"weight":510,"compare_at_price":14900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid_d954417e-2b58-4154-92c2-07cd3931f03b.jpg?v=1731400140"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid_d954417e-2b58-4154-92c2-07cd3931f03b.jpg?v=1731400140","options":["Title"],"media":[{"alt":"Super-Rigid-SR-C-156-DB8 - RZCrewGarage","id":28768907559094,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1400,"width":1400,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid_d954417e-2b58-4154-92c2-07cd3931f03b.jpg?v=1731400140"},"aspect_ratio":1.0,"height":1400,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid_d954417e-2b58-4154-92c2-07cd3931f03b.jpg?v=1731400140","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-156\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 10 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eIntegra type R | DB8 | 1996-2001 | NA | B18C | I4\u003c!--split--\u003e"}

{"id":3856189522017,"title":"Super Rigid Subframe Collar Kit - Front 10 Pieces - Honda Integra type R DC2","handle":"super-rigid-sr-c-158-dc2","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-158\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 10 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eIntegra type R | DC2 Zenki | 1996-1998 | NA | B18C | I4\u003cbr\u003eIntegra type R | DC2 Kouki | 1998-2001 | NA | B18C | I4\u003c!--split--\u003e","published_at":"2019-06-19T14:25:20+08:00","created_at":"2019-06-19T14:25:22+08:00","vendor":"Super Rigid","type":"Collar Kits","tags":["1996","1997","1998","1999","2000","2001","collar-kits","front","honda","integra-type-r-dc2-kouki-1998-2001-na-b18c-i4","integra-type-r-dc2-zenki-1996-1998-na-b18c-i4","rigid-collars","sg1","super-rigid","ws140"],"price":11870,"price_min":11870,"price_max":11870,"available":true,"price_varies":false,"compare_at_price":14900,"compare_at_price_min":14900,"compare_at_price_max":14900,"compare_at_price_varies":false,"variants":[{"id":29164342476897,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SR-C-158","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Super Rigid Subframe Collar Kit - Front 10 Pieces - Honda Integra type R DC2","public_title":null,"options":["Default Title"],"price":11870,"weight":510,"compare_at_price":14900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid_e4d3ebdf-dfdf-4444-931e-c6c261df2ceb.jpg?v=1731400144"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid_e4d3ebdf-dfdf-4444-931e-c6c261df2ceb.jpg?v=1731400144","options":["Title"],"media":[{"alt":"Super-Rigid-SR-C-158-DC2 - RZCrewGarage","id":28768907788470,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1400,"width":1400,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid_e4d3ebdf-dfdf-4444-931e-c6c261df2ceb.jpg?v=1731400144"},"aspect_ratio":1.0,"height":1400,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid_e4d3ebdf-dfdf-4444-931e-c6c261df2ceb.jpg?v=1731400144","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-158\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 10 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eIntegra type R | DC2 Zenki | 1996-1998 | NA | B18C | I4\u003cbr\u003eIntegra type R | DC2 Kouki | 1998-2001 | NA | B18C | I4\u003c!--split--\u003e"}

{"id":3856210395233,"title":"Super Rigid Subframe Collar Kit - Front 12 Pieces - Nissan Skyline GT-R R32\/33\/34","handle":"super-rigid-sr-c-608-r32-33-34","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-608\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 12 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR34 Zenki | 1999-2000 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR34 Kouki | 2000-2002 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BCNR33 Zenki | 1995-1996 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BCNR33 Chuki | 1996-1997 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BCNR33 Kouki | 1997-1998 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003cbr\u003eSkyline | HR32 Zenki | 1989-1991 | NA | RB20DE | I6\u003cbr\u003eSkyline | HR32 Kouki | 1991-1993 | NA | RB20DE | I6\u003cbr\u003eSkyline | HR32 Zenki | 1989-1991 | NA | RB20E | I6\u003cbr\u003eSkyline | HR32 Kouki | 1991-1993 | NA | RB20E | I6\u003cbr\u003eSkyline | HR33 Zenki | 1993-1995 | NA | RB20E | I6\u003cbr\u003eSkyline | HR33 Chuki | 1995-1996 | NA | RB20E | I6\u003cbr\u003eSkyline | HR33 Kouki | 1996-1998 | NA | RB20E | I6\u003cbr\u003eSkyline | HR34 | 1998-2000 | NA | RB20DE | I6\u003cbr\u003eSkyline | HR34 | 2000-2001 | NA | RB20DE | I6\u003c!--split--\u003e","published_at":"2019-06-19T14:39:37+08:00","created_at":"2019-06-19T14:39:39+08:00","vendor":"Super Rigid","type":"Collar Kits","tags":["1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","collar-kits","front","nissan","rigid-collars","sg1","skyline-gt-r-bcnr33-chuki-1996-1997-tt-rb26dett-i6","skyline-gt-r-bcnr33-kouki-1997-1998-tt-rb26dett-i6","skyline-gt-r-bcnr33-zenki-1995-1996-tt-rb26dett-i6","skyline-gt-r-bnr32-chuki-1991-1993-tt-rb26dett-i6","skyline-gt-r-bnr32-kouki-1993-1994-tt-rb26dett-i6","skyline-gt-r-bnr32-zenki-1989-1991-tt-rb26dett-i6","skyline-gt-r-bnr34-kouki-2000-2002-tt-rb26dett-i6","skyline-gt-r-bnr34-zenki-1999-2000-tt-rb26dett-i6","skyline-hr32-kouki-1991-1993-na-rb20de-i6","skyline-hr32-kouki-1991-1993-na-rb20e-i6","skyline-hr32-zenki-1989-1991-na-rb20de-i6","skyline-hr32-zenki-1989-1991-na-rb20e-i6","skyline-hr33-chuki-1995-1996-na-rb20e-i6","skyline-hr33-kouki-1996-1998-na-rb20e-i6","skyline-hr33-zenki-1993-1995-na-rb20e-i6","skyline-hr34-1998-2000-na-rb20de-i6","skyline-hr34-2000-2001-na-rb20de-i6","super-rigid","ws140"],"price":14740,"price_min":14740,"price_max":14740,"available":true,"price_varies":false,"compare_at_price":18600,"compare_at_price_min":18600,"compare_at_price_max":18600,"compare_at_price_varies":false,"variants":[{"id":29164507758689,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SR-C-608","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Super Rigid Subframe Collar Kit - Front 12 Pieces - Nissan Skyline GT-R R32\/33\/34","public_title":null,"options":["Default Title"],"price":14740,"weight":510,"compare_at_price":18600,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid_94db616d-eeb3-4aa1-b4ca-1f26ad97034b.jpg?v=1731401034"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid_94db616d-eeb3-4aa1-b4ca-1f26ad97034b.jpg?v=1731401034","options":["Title"],"media":[{"alt":"Super-Rigid-SR-C-608-R32\/33\/34 - RZCrewGarage","id":28768958251190,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1400,"width":1400,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid_94db616d-eeb3-4aa1-b4ca-1f26ad97034b.jpg?v=1731401034"},"aspect_ratio":1.0,"height":1400,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid_94db616d-eeb3-4aa1-b4ca-1f26ad97034b.jpg?v=1731401034","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-608\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 12 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSkyline GT-R | BNR34 Zenki | 1999-2000 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR34 Kouki | 2000-2002 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BCNR33 Zenki | 1995-1996 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BCNR33 Chuki | 1996-1997 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BCNR33 Kouki | 1997-1998 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Zenki | 1989-1991 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Chuki | 1991-1993 | TT | RB26DETT | I6\u003cbr\u003eSkyline GT-R | BNR32 Kouki | 1993-1994 | TT | RB26DETT | I6\u003cbr\u003eSkyline | HR32 Zenki | 1989-1991 | NA | RB20DE | I6\u003cbr\u003eSkyline | HR32 Kouki | 1991-1993 | NA | RB20DE | I6\u003cbr\u003eSkyline | HR32 Zenki | 1989-1991 | NA | RB20E | I6\u003cbr\u003eSkyline | HR32 Kouki | 1991-1993 | NA | RB20E | I6\u003cbr\u003eSkyline | HR33 Zenki | 1993-1995 | NA | RB20E | I6\u003cbr\u003eSkyline | HR33 Chuki | 1995-1996 | NA | RB20E | I6\u003cbr\u003eSkyline | HR33 Kouki | 1996-1998 | NA | RB20E | I6\u003cbr\u003eSkyline | HR34 | 1998-2000 | NA | RB20DE | I6\u003cbr\u003eSkyline | HR34 | 2000-2001 | NA | RB20DE | I6\u003c!--split--\u003e"}

{"id":3856199975009,"title":"Super Rigid Subframe Collar Kit - Front 4 Pieces - Nissan Sunny B14","handle":"super-rigid-sr-c-394-b14","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-394\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 4 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSunny | B14 | 1994-1999 | NA | GA13DE | I4\u003c!--split--\u003e","published_at":"2019-06-19T14:32:00+08:00","created_at":"2019-06-19T14:32:01+08:00","vendor":"Super Rigid","type":"Collar Kits","tags":["1994","1995","1996","1997","1998","1999","collar-kits","front","nissan","rigid-collars","sg1","sunny-b14-1994-1999-na-ga13de-i4","super-rigid","ws140"],"price":6830,"price_min":6830,"price_max":6830,"available":true,"price_varies":false,"compare_at_price":8600,"compare_at_price_min":8600,"compare_at_price_max":8600,"compare_at_price_varies":false,"variants":[{"id":29164468732001,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SR-C-394","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Super Rigid Subframe Collar Kit - Front 4 Pieces - Nissan Sunny B14","public_title":null,"options":["Default Title"],"price":6830,"weight":510,"compare_at_price":8600,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid_570f1374-82bb-4113-9a8b-380c02235eb3.jpg?v=1731400522"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid_570f1374-82bb-4113-9a8b-380c02235eb3.jpg?v=1731400522","options":["Title"],"media":[{"alt":"Super-Rigid-SR-C-394-B14 - RZCrewGarage","id":28768932430006,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1400,"width":1400,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid_570f1374-82bb-4113-9a8b-380c02235eb3.jpg?v=1731400522"},"aspect_ratio":1.0,"height":1400,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid_570f1374-82bb-4113-9a8b-380c02235eb3.jpg?v=1731400522","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-394\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 4 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSunny | B14 | 1994-1999 | NA | GA13DE | I4\u003c!--split--\u003e"}

{"id":3856181723233,"title":"Super Rigid Subframe Collar Kit - Front 6 Pieces - Alfa Romeo 145 930A","handle":"super-rigid-sr-c-1-930a","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-1\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 6 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e145 | 930A | 1994-2000 | NA | T | I4\u003c!--split--\u003e","published_at":"2019-06-19T14:18:32+08:00","created_at":"2019-06-19T14:18:34+08:00","vendor":"Super Rigid","type":"Collar Kits","tags":["145-930a-1994-2000-na-t-i4","1994","1995","1996","1997","1998","1999","2000","alfa-romeo","collar-kits","front","rigid-collars","sg1","super-rigid","ws140"],"price":10430,"price_min":10430,"price_max":10430,"available":true,"price_varies":false,"compare_at_price":13100,"compare_at_price_min":13100,"compare_at_price_max":13100,"compare_at_price_varies":false,"variants":[{"id":29164296863841,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SR-C-1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Super Rigid Subframe Collar Kit - Front 6 Pieces - Alfa Romeo 145 930A","public_title":null,"options":["Default Title"],"price":10430,"weight":510,"compare_at_price":13100,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid.jpg?v=1731399785"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid.jpg?v=1731399785","options":["Title"],"media":[{"alt":"Super-Rigid-SR-C-1-930A - RZCrewGarage","id":28768885571766,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1400,"width":1400,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid.jpg?v=1731399785"},"aspect_ratio":1.0,"height":1400,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid.jpg?v=1731399785","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-1\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 6 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e145 | 930A | 1994-2000 | NA | T | I4\u003c!--split--\u003e"}

{"id":3856181788769,"title":"Super Rigid Subframe Collar Kit - Front 6 Pieces - Alfa Romeo 146 930B","handle":"super-rigid-sr-c-2-930b","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-2\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 6 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e146 | 930B | 1995-2000 | NA | T | I4\u003c!--split--\u003e","published_at":"2019-06-19T14:18:35+08:00","created_at":"2019-06-19T14:18:37+08:00","vendor":"Super Rigid","type":"Collar Kits","tags":["146-930b-1995-2000-na-t-i4","1995","1996","1997","1998","1999","2000","alfa-romeo","collar-kits","front","rigid-collars","sg1","super-rigid","ws140"],"price":10430,"price_min":10430,"price_max":10430,"available":true,"price_varies":false,"compare_at_price":13100,"compare_at_price_min":13100,"compare_at_price_max":13100,"compare_at_price_varies":false,"variants":[{"id":29164296994913,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SR-C-2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Super Rigid Subframe Collar Kit - Front 6 Pieces - Alfa Romeo 146 930B","public_title":null,"options":["Default Title"],"price":10430,"weight":510,"compare_at_price":13100,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid_09094ad0-63a6-4a23-abe7-55543fa24d68.jpg?v=1731399787"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid_09094ad0-63a6-4a23-abe7-55543fa24d68.jpg?v=1731399787","options":["Title"],"media":[{"alt":"Super-Rigid-SR-C-2-930B - RZCrewGarage","id":28768885801142,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1400,"width":1400,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid_09094ad0-63a6-4a23-abe7-55543fa24d68.jpg?v=1731399787"},"aspect_ratio":1.0,"height":1400,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid_09094ad0-63a6-4a23-abe7-55543fa24d68.jpg?v=1731399787","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-2\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 6 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e146 | 930B | 1995-2000 | NA | T | I4\u003c!--split--\u003e"}

{"id":3856181854305,"title":"Super Rigid Subframe Collar Kit - Front 6 Pieces - Alfa Romeo 155 167","handle":"super-rigid-sr-c-4-167","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-4\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 6 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e155 | 167 | 1992-1998 | NA | T | I4\u003c!--split--\u003e","published_at":"2019-06-19T14:18:40+08:00","created_at":"2019-06-19T14:18:42+08:00","vendor":"Super Rigid","type":"Collar Kits","tags":["155-167-1992-1998-na-t-i4","1992","1993","1994","1995","1996","1997","1998","alfa-romeo","collar-kits","front","rigid-collars","sg1","super-rigid","ws140"],"price":10430,"price_min":10430,"price_max":10430,"available":true,"price_varies":false,"compare_at_price":13100,"compare_at_price_min":13100,"compare_at_price_max":13100,"compare_at_price_varies":false,"variants":[{"id":29164297158753,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SR-C-4","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Super Rigid Subframe Collar Kit - Front 6 Pieces - Alfa Romeo 155 167","public_title":null,"options":["Default Title"],"price":10430,"weight":510,"compare_at_price":13100,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid_7eb42c11-2e85-445c-8c26-07bf9f367c8a.jpg?v=1731399790"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid_7eb42c11-2e85-445c-8c26-07bf9f367c8a.jpg?v=1731399790","options":["Title"],"media":[{"alt":"Super-Rigid-SR-C-4-167 - RZCrewGarage","id":28768886096054,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1400,"width":1400,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid_7eb42c11-2e85-445c-8c26-07bf9f367c8a.jpg?v=1731399790"},"aspect_ratio":1.0,"height":1400,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid_7eb42c11-2e85-445c-8c26-07bf9f367c8a.jpg?v=1731399790","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-4\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 6 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e155 | 167 | 1992-1998 | NA | T | I4\u003c!--split--\u003e"}

{"id":3856181887073,"title":"Super Rigid Subframe Collar Kit - Front 6 Pieces - Alfa Romeo 156 932 ALL","handle":"super-rigid-sr-c-5-932all","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-5\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 6 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e156 | 932 | 1996-2007 | NA | T | I4\u003cbr\u003e156 | 932 V | 1996-2007 | NA | V | V6\u003c!--split--\u003e","published_at":"2019-06-19T14:18:42+08:00","created_at":"2019-06-19T14:18:44+08:00","vendor":"Super Rigid","type":"Collar Kits","tags":["156-932-1996-2007-na-t-i4","156-932-v-1996-2007-na-v-v6","1996","1997","1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","alfa-romeo","collar-kits","front","rigid-collars","sg1","super-rigid","ws140"],"price":10430,"price_min":10430,"price_max":10430,"available":true,"price_varies":false,"compare_at_price":13100,"compare_at_price_min":13100,"compare_at_price_max":13100,"compare_at_price_varies":false,"variants":[{"id":29164297257057,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SR-C-5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Super Rigid Subframe Collar Kit - Front 6 Pieces - Alfa Romeo 156 932 ALL","public_title":null,"options":["Default Title"],"price":10430,"weight":510,"compare_at_price":13100,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid_493098b1-7bf6-4e09-bcb5-8a9ec3fceca2.jpg?v=1731399792"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid_493098b1-7bf6-4e09-bcb5-8a9ec3fceca2.jpg?v=1731399792","options":["Title"],"media":[{"alt":"Super-Rigid-SR-C-5-932ALL - RZCrewGarage","id":28768886128822,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1400,"width":1400,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid_493098b1-7bf6-4e09-bcb5-8a9ec3fceca2.jpg?v=1731399792"},"aspect_ratio":1.0,"height":1400,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid_493098b1-7bf6-4e09-bcb5-8a9ec3fceca2.jpg?v=1731399792","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-5\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 6 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e156 | 932 | 1996-2007 | NA | T | I4\u003cbr\u003e156 | 932 V | 1996-2007 | NA | V | V6\u003c!--split--\u003e"}

{"id":3856183132257,"title":"Super Rigid Subframe Collar Kit - Front 6 Pieces - BMW E36 Coupe\/Sedan E36","handle":"super-rigid-sr-c-28-e36","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-28\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 6 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e3 Series | E36 | 1990-2001 | NA | I4\u003cbr\u003e3 Series | E36 | 1991-1998 | NA | I6\u003c!--split--\u003e","published_at":"2019-06-19T14:20:00+08:00","created_at":"2019-06-19T14:20:03+08:00","vendor":"Super Rigid","type":"Collar Kits","tags":["1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","3-series-e36-1990-2001-na-i4","3-series-e36-1991-1998-na-i6","bmw","collar-kits","front","rigid-collars","sg1","super-rigid","ws140"],"price":9350,"price_min":9350,"price_max":9350,"available":true,"price_varies":false,"compare_at_price":11800,"compare_at_price_min":11800,"compare_at_price_max":11800,"compare_at_price_varies":false,"variants":[{"id":29164305547361,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SR-C-28","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Super Rigid Subframe Collar Kit - Front 6 Pieces - BMW E36 Coupe\/Sedan E36","public_title":null,"options":["Default Title"],"price":9350,"weight":510,"compare_at_price":11800,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid_33b368ac-54c6-461a-b872-b62f104a68aa.jpg?v=1731399835"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid_33b368ac-54c6-461a-b872-b62f104a68aa.jpg?v=1731399835","options":["Title"],"media":[{"alt":"Super-Rigid-SR-C-28-E36 - RZCrewGarage","id":28768888651958,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1400,"width":1400,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid_33b368ac-54c6-461a-b872-b62f104a68aa.jpg?v=1731399835"},"aspect_ratio":1.0,"height":1400,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid_33b368ac-54c6-461a-b872-b62f104a68aa.jpg?v=1731399835","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-28\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 6 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e3 Series | E36 | 1990-2001 | NA | I4\u003cbr\u003e3 Series | E36 | 1991-1998 | NA | I6\u003c!--split--\u003e"}

{"id":3856185131105,"title":"Super Rigid Subframe Collar Kit - Front 6 Pieces - Honda Accord CD3\/4\/5\/6","handle":"super-rigid-sr-c-72-cd3-4-5-6","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-72\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 6 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eAccord | CD3 | 1994-1997 | NA | F18B | I4\u003cbr\u003eAccord | CD4 | 1994-1997 | NA | F20B | I4\u003cbr\u003eAccord | CD5 | 1994-1997 | NA | F22B | I4\u003cbr\u003eAccord | CD6 | 1994-1997 | NA | H22A | I4\u003c!--split--\u003e","published_at":"2019-06-19T14:21:51+08:00","created_at":"2019-06-19T14:21:53+08:00","vendor":"Super Rigid","type":"Collar Kits","tags":["1994","1995","1996","1997","accord-cd3-1994-1997-na-f18b-i4","accord-cd4-1994-1997-na-f20b-i4","accord-cd5-1994-1997-na-f22b-i4","accord-cd6-1994-1997-na-h22a-i4","collar-kits","front","honda","rigid-collars","sg1","super-rigid","ws140"],"price":10790,"price_min":10790,"price_max":10790,"available":true,"price_varies":false,"compare_at_price":13600,"compare_at_price_min":13600,"compare_at_price_max":13600,"compare_at_price_varies":false,"variants":[{"id":29164317802593,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SR-C-72","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Super Rigid Subframe Collar Kit - Front 6 Pieces - Honda Accord CD3\/4\/5\/6","public_title":null,"options":["Default Title"],"price":10790,"weight":510,"compare_at_price":13600,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid_3caa4fa0-e148-4ac5-b7da-b1b494a480db.jpg?v=1731399916"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid_3caa4fa0-e148-4ac5-b7da-b1b494a480db.jpg?v=1731399916","options":["Title"],"media":[{"alt":"Super-Rigid-SR-C-72-CD3\/4\/5\/6 - RZCrewGarage","id":28768894255286,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1400,"width":1400,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid_3caa4fa0-e148-4ac5-b7da-b1b494a480db.jpg?v=1731399916"},"aspect_ratio":1.0,"height":1400,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Super_Rigid_3caa4fa0-e148-4ac5-b7da-b1b494a480db.jpg?v=1731399916","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Super Rigid\u003cbr\u003ePart Number: SR-C-72\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Pieces: 6 Pieces\u003cbr\u003e\u003cbr\u003eSuper Rigid's Chassis Enhancement Rings are specifically designed aluminium 6061 pieces that fit between the car’s subframe and chassis and prevent them from moving.\u003cbr\u003e\u003cbr\u003eBolt holes between the chassis and subframe are designed to be bigger than the bolt to ease production at the assembly factory.\u003cbr\u003e\nWith time, the bolts loosen slightly and movement between the chassis and subframe occurs. \u003cbr\u003e\u003cbr\u003eBy centering the two parts along the bolt’s axis, Super Rigid's rings align them as per factory settings and prevent any future movement between the chassis and subframe. This results in a more precise turning, a better steering feel and an overall improved handling.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eAccord | CD3 | 1994-1997 | NA | F18B | I4\u003cbr\u003eAccord | CD4 | 1994-1997 | NA | F20B | I4\u003cbr\u003eAccord | CD5 | 1994-1997 | NA | F22B | I4\u003cbr\u003eAccord | CD6 | 1994-1997 | NA | H22A | I4\u003c!--split--\u003e"}