Front

{"id":1433323995233,"title":"Spoon Rigid Collar Kit - Front - Suzuki Swift Sport ZC32S","handle":"spoon-rigid-collar-kit-front-suzuki-swift-sport-zc32s-50261-zc7-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-ZC7-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC32S | 2010-2017 | NA | M16A | I4\u003c!--split--\u003e","published_at":"2018-09-23T15:25:13+08:00","created_at":"2018-09-23T15:25:14+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2010","2011","2012","2013","2014","2015","2016","2017","collar-kits","front","jp1","rigid-collars","spoon","suzuki","swift-sport-zc32s-2010-2017-na-m16a-i4","ws17","ZC32S"],"price":20800,"price_min":20800,"price_max":20800,"available":true,"price_varies":false,"compare_at_price":21000,"compare_at_price_min":21000,"compare_at_price_max":21000,"compare_at_price_varies":false,"variants":[{"id":12435581468769,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-ZC7-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Suzuki Swift Sport ZC32S","public_title":null,"options":["Default Title"],"price":20800,"weight":1100,"compare_at_price":21000,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_e335dc14-47cc-4904-b35d-ad516cbdd3e0.jpg?v=1710167940"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_e335dc14-47cc-4904-b35d-ad516cbdd3e0.jpg?v=1710167940","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Suzuki Swift Sport ZC32S - 50261-ZC7-000 - RZCrewGarage","id":22882186297526,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_e335dc14-47cc-4904-b35d-ad516cbdd3e0.jpg?v=1710167940"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_e335dc14-47cc-4904-b35d-ad516cbdd3e0.jpg?v=1710167940","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-ZC7-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC32S | 2010-2017 | NA | M16A | I4\u003c!--split--\u003e"}

{"id":1433316687969,"title":"Spoon Rigid Collar Kit - Front - Toyota IQ NGJ10","handle":"spoon-rigid-collar-kit-front-toyota-iq-ngj10-50261-ngj-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-NGJ-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eIQ | NGJ10 | 2009-2018 | NA | 1NR-FE | I4\u003c!--split--\u003e","published_at":"2018-09-23T15:19:52+08:00","created_at":"2018-09-23T15:19:53+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","collar-kits","front","iq-ngj10-2009-2018-na-1nr-fe-i4","jp1","NGJ10","rigid-collars","spoon","toyota","ws17"],"price":20800,"price_min":20800,"price_max":20800,"available":true,"price_varies":false,"compare_at_price":21000,"compare_at_price_min":21000,"compare_at_price_max":21000,"compare_at_price_varies":false,"variants":[{"id":12435574128737,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-NGJ-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Toyota IQ NGJ10","public_title":null,"options":["Default Title"],"price":20800,"weight":1100,"compare_at_price":21000,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_3753a1e5-1064-4296-9bad-4dccc7bb44b0.jpg?v=1710167794"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_3753a1e5-1064-4296-9bad-4dccc7bb44b0.jpg?v=1710167794","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Toyota IQ NGJ10 - 50261-NGJ-000 - RZCrewGarage","id":22882165751990,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_3753a1e5-1064-4296-9bad-4dccc7bb44b0.jpg?v=1710167794"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_3753a1e5-1064-4296-9bad-4dccc7bb44b0.jpg?v=1710167794","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-NGJ-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eIQ | NGJ10 | 2009-2018 | NA | 1NR-FE | I4\u003c!--split--\u003e"}

{"id":1433316884577,"title":"Spoon Rigid Collar Kit - Front - Toyota IST NCP110","handle":"spoon-rigid-collar-kit-front-toyota-ist-ncp110-50261-p91-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-P91-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eIST | NCP110 | 2007-2018 | NA | 1NZ-FE | I4\u003c!--split--\u003e","published_at":"2018-09-23T15:20:04+08:00","created_at":"2018-09-23T15:20:06+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","collar-kits","front","ist-ncp110-2007-2018-na-1nz-fe-i4","jp1","NCP110","rigid-collars","spoon","toyota","ws17"],"price":20800,"price_min":20800,"price_max":20800,"available":true,"price_varies":false,"compare_at_price":21000,"compare_at_price_min":21000,"compare_at_price_max":21000,"compare_at_price_varies":false,"variants":[{"id":12435574325345,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-P91-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Toyota IST NCP110","public_title":null,"options":["Default Title"],"price":20800,"weight":1100,"compare_at_price":21000,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_83e8ee2c-b050-4eda-bd25-2a7f124f1030.jpg?v=1710167796"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_83e8ee2c-b050-4eda-bd25-2a7f124f1030.jpg?v=1710167796","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Toyota IST NCP110 - 50261-P91-000 - RZCrewGarage","id":22882166210742,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_83e8ee2c-b050-4eda-bd25-2a7f124f1030.jpg?v=1710167796"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_83e8ee2c-b050-4eda-bd25-2a7f124f1030.jpg?v=1710167796","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-P91-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eIST | NCP110 | 2007-2018 | NA | 1NZ-FE | I4\u003c!--split--\u003e"}

{"id":1433318129761,"title":"Spoon Rigid Collar Kit - Front - Toyota Prius ZVW30","handle":"spoon-rigid-collar-kit-front-toyota-prius-zvw30-50261-zvw-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-ZVW-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003ePrius | ZVW30 | 2009-2015 | H | 2ZR-FXE | I4\u003c!--split--\u003e","published_at":"2018-09-23T15:21:01+08:00","created_at":"2018-09-23T15:21:01+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2009","2010","2011","2012","2013","2014","2015","collar-kits","front","jp1","prius-zvw30-2009-2015-h-2zr-fxe-i4","rigid-collars","spoon","toyota","ws17","ZVW30"],"price":20800,"price_min":20800,"price_max":20800,"available":true,"price_varies":false,"compare_at_price":21000,"compare_at_price_min":21000,"compare_at_price_max":21000,"compare_at_price_varies":false,"variants":[{"id":12435575570529,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-ZVW-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Toyota Prius ZVW30","public_title":null,"options":["Default Title"],"price":20800,"weight":1100,"compare_at_price":21000,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_85cec39c-0351-48ba-9713-b9e4f17092e9.jpg?v=1710167818"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_85cec39c-0351-48ba-9713-b9e4f17092e9.jpg?v=1710167818","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Toyota Prius ZVW30 - 50261-ZVW-000 - RZCrewGarage","id":22882171125942,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_85cec39c-0351-48ba-9713-b9e4f17092e9.jpg?v=1710167818"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_85cec39c-0351-48ba-9713-b9e4f17092e9.jpg?v=1710167818","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-ZVW-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003ePrius | ZVW30 | 2009-2015 | H | 2ZR-FXE | I4\u003c!--split--\u003e"}

{"id":1433316753505,"title":"Spoon Rigid Collar Kit - Front - Toyota SAI AZK10","handle":"spoon-rigid-collar-kit-front-toyota-sai-azk10-50261-zvw-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-ZVW-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSAI | AZK10 | 2009-2018 | H | 2AZ-FXE | I4\u003c!--split--\u003e","published_at":"2018-09-23T15:19:55+08:00","created_at":"2018-09-23T15:19:56+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","AZK10","collar-kits","front","jp1","rigid-collars","sai-azk10-2009-2018-h-2az-fxe-i4","spoon","toyota","ws17"],"price":20800,"price_min":20800,"price_max":20800,"available":true,"price_varies":false,"compare_at_price":21000,"compare_at_price_min":21000,"compare_at_price_max":21000,"compare_at_price_varies":false,"variants":[{"id":12435574194273,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-ZVW-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Toyota SAI AZK10","public_title":null,"options":["Default Title"],"price":20800,"weight":1100,"compare_at_price":21000,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_53ee2901-9858-407c-bea5-115abc9b8f38.jpg?v=1710167794"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_53ee2901-9858-407c-bea5-115abc9b8f38.jpg?v=1710167794","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Toyota SAI AZK10 - 50261-ZVW-000 - RZCrewGarage","id":22882165850294,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_53ee2901-9858-407c-bea5-115abc9b8f38.jpg?v=1710167794"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_53ee2901-9858-407c-bea5-115abc9b8f38.jpg?v=1710167794","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-ZVW-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSAI | AZK10 | 2009-2018 | H | 2AZ-FXE | I4\u003c!--split--\u003e"}

{"id":1433316950113,"title":"Spoon Rigid Collar Kit - Front - Toyota Vanguard GSA33W","handle":"spoon-rigid-collar-kit-front-toyota-vanguard-gsa33w-50261-avu-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-AVU-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eVanguard | GSA33W | 2007-2018 | NA | 2GR-FE | V6\u003c!--split--\u003e","published_at":"2018-09-23T15:20:09+08:00","created_at":"2018-09-23T15:20:10+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","collar-kits","front","GSA33W","jp1","rigid-collars","spoon","toyota","vanguard-gsa33w-2007-2018-na-2gr-fe-v6","ws17"],"price":20800,"price_min":20800,"price_max":20800,"available":true,"price_varies":false,"compare_at_price":21000,"compare_at_price_min":21000,"compare_at_price_max":21000,"compare_at_price_varies":false,"variants":[{"id":12435574390881,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-AVU-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Toyota Vanguard GSA33W","public_title":null,"options":["Default Title"],"price":20800,"weight":1100,"compare_at_price":21000,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_0ddb8e9d-64fd-4ed4-8a03-9905ebdb67e8.jpg?v=1710167796"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_0ddb8e9d-64fd-4ed4-8a03-9905ebdb67e8.jpg?v=1710167796","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Toyota Vanguard GSA33W - 50261-AVU-000 - RZCrewGarage","id":22882166472886,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_0ddb8e9d-64fd-4ed4-8a03-9905ebdb67e8.jpg?v=1710167796"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_0ddb8e9d-64fd-4ed4-8a03-9905ebdb67e8.jpg?v=1710167796","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-AVU-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eVanguard | GSA33W | 2007-2018 | NA | 2GR-FE | V6\u003c!--split--\u003e"}

{"id":1433317015649,"title":"Spoon Rigid Collar Kit - Front - Toyota Vitz NCP131","handle":"spoon-rigid-collar-kit-front-toyota-vitz-ncp131-50261-p91-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-P91-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eVitz | NCP131 | 2010-2018 | NA | 1NZ-FE | I4\u003c!--split--\u003e","published_at":"2018-09-23T15:20:12+08:00","created_at":"2018-09-23T15:20:13+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2010","2011","2012","2013","2014","2015","2016","2017","2018","collar-kits","front","jp1","NCP131","rigid-collars","spoon","toyota","vitz-ncp131-2010-2018-na-1nz-fe-i4","ws17"],"price":20800,"price_min":20800,"price_max":20800,"available":true,"price_varies":false,"compare_at_price":21000,"compare_at_price_min":21000,"compare_at_price_max":21000,"compare_at_price_varies":false,"variants":[{"id":12435574456417,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-P91-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Toyota Vitz NCP131","public_title":null,"options":["Default Title"],"price":20800,"weight":1100,"compare_at_price":21000,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_e20c3718-d183-4f01-94b5-ae719c7192db.jpg?v=1710167799"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_e20c3718-d183-4f01-94b5-ae719c7192db.jpg?v=1710167799","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Toyota Vitz NCP131 - 50261-P91-000 - RZCrewGarage","id":22882166800566,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_e20c3718-d183-4f01-94b5-ae719c7192db.jpg?v=1710167799"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_e20c3718-d183-4f01-94b5-ae719c7192db.jpg?v=1710167799","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-P91-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eVitz | NCP131 | 2010-2018 | NA | 1NZ-FE | I4\u003c!--split--\u003e"}

{"id":4593508417633,"title":"Spoon Twin-Block Caliper Set - Honda - CR-Z ZF1\/ZF2","handle":"spoon-twin-block-caliper-set-zf1-zf2-45020-dcr-g00","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePosition: Front\u003cbr\u003eRotors Diameter: Spoon Rotor\u003cbr\u003e\u003cbr\u003eThe Spoon 4-pot caliper has been specifically designed and tested for Honda applications. Unlike other 4-pot calipers, Spoon calipers are direct fit and are designed to work with the stock brake system, including the ABS. Spoon calipers use stock Honda size brake pads, which gives users incredible flexibility in choosing pads. The 4-pot calipers significantly improve both high speed braking and brake pedal feel and its consistency during track use.\u003cbr\u003eThe 4-pot design also makes pad wear more even and minimizes rotor warpage. The aluminium construction also helps reduce un-sprung weight significantly. These benefits are achieved while maintaining a stock feel for daily driving.\u003cbr\u003eSpoon calipers are manufactured by Nissin, the OE supplier of all Honda brakes. The twin-block caliper was developed over a year specifically for the EK9 Civic Type R and DC2 Integra Type R.\u003cbr\u003ePLEASE NOTE: When installing Twin Block Calipers to the Civic EG, EK and 96 Spec DC2 a pair of Spoon 15\" Brake Rotors, Long Hub Bolts and 3mm wheel spacers are required. Due to the addition width of the caliper to accommodate the 4 piston arrangement it may interfere with the wheel. Please check with wheel manufacture for clearance.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4,CR-Z | ZF2 | 2012-2018 | H | LEA | I4\u003c!--split--\u003e","published_at":"2020-04-28T16:15:17+08:00","created_at":"2020-04-28T16:15:19+08:00","vendor":"Spoon","type":"Brake Calipers and Kits","tags":["2010","2011","2012","2013","2014","2015","2016","2017","2018","brake-calipers-and-kits","cr-z-zf1-2010-2012-h-lea-i4","cr-z-zf2-2012-2018-h-lea-i4","front","honda","JP1","spoon","spoon-rotor","ws17"],"price":146370,"price_min":146370,"price_max":196930,"available":true,"price_varies":true,"compare_at_price":147600,"compare_at_price_min":147600,"compare_at_price_max":198700,"compare_at_price_varies":true,"variants":[{"id":32130624159841,"title":"No \/ No","option1":"No","option2":"No","option3":null,"sku":"45020-DCR-G00","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Twin-Block Caliper Set - Honda - CR-Z ZF1\/ZF2 - No \/ No","public_title":"No \/ No","options":["No","No"],"price":146370,"weight":8000,"compare_at_price":147600,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32130624192609,"title":"Yes \/ No","option1":"Yes","option2":"No","option3":null,"sku":"45020-DCR-G00 + 45251-EK9-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Twin-Block Caliper Set - Honda - CR-Z ZF1\/ZF2 - Yes \/ No","public_title":"Yes \/ No","options":["Yes","No"],"price":175540,"weight":20000,"compare_at_price":177100,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32130624225377,"title":"No \/ Yes","option1":"No","option2":"Yes","option3":null,"sku":"45020-DCR-G00 + 45022-ZF1-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Twin-Block Caliper Set - Honda - CR-Z ZF1\/ZF2 - No \/ Yes","public_title":"No \/ Yes","options":["No","Yes"],"price":181370,"weight":10000,"compare_at_price":183000,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32130624258145,"title":"Yes \/ Yes","option1":"Yes","option2":"Yes","option3":null,"sku":"45020-DCR-G00 + 45251-EK9-000 + 45022-ZF1-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Twin-Block Caliper Set - Honda - CR-Z ZF1\/ZF2 - Yes \/ Yes","public_title":"Yes \/ Yes","options":["Yes","Yes"],"price":196930,"weight":22000,"compare_at_price":198700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-DCR-G00_a982ad89-b364-4b81-b851-f134b911bcee.jpg?v=1710191554","\/\/rzcrewgarage.com\/cdn\/shop\/products\/45251-EK9-000.jpg?v=1710191556","\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-DCR-G00_45022-EG6-000_420e9a94-fec0-44bc-a865-d5a9f8958a82.jpg?v=1710191557"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-DCR-G00_a982ad89-b364-4b81-b851-f134b911bcee.jpg?v=1710191554","options":["Brake Rotors","Brake Pads"],"media":[{"alt":"45020-DCR-G00 + 45251-EK9-000 + 45022-ZF1-000 - Rzcrewgarage","id":25428600750262,"position":1,"preview_image":{"aspect_ratio":1.5,"height":1489,"width":2234,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-DCR-G00_a982ad89-b364-4b81-b851-f134b911bcee.jpg?v=1710191554"},"aspect_ratio":1.5,"height":1489,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-DCR-G00_a982ad89-b364-4b81-b851-f134b911bcee.jpg?v=1710191554","width":2234},{"alt":"45020-DCR-G00 + 45251-EK9-000 - Rzcrewgarage","id":25428600783030,"position":2,"preview_image":{"aspect_ratio":1.5,"height":540,"width":810,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45251-EK9-000.jpg?v=1710191556"},"aspect_ratio":1.5,"height":540,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45251-EK9-000.jpg?v=1710191556","width":810},{"alt":"45020-DCR-G00 + 45022-ZF1-000 - Rzcrewgarage","id":25428600815798,"position":3,"preview_image":{"aspect_ratio":1.171,"height":689,"width":807,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-DCR-G00_45022-EG6-000_420e9a94-fec0-44bc-a865-d5a9f8958a82.jpg?v=1710191557"},"aspect_ratio":1.171,"height":689,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-DCR-G00_45022-EG6-000_420e9a94-fec0-44bc-a865-d5a9f8958a82.jpg?v=1710191557","width":807}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePosition: Front\u003cbr\u003eRotors Diameter: Spoon Rotor\u003cbr\u003e\u003cbr\u003eThe Spoon 4-pot caliper has been specifically designed and tested for Honda applications. Unlike other 4-pot calipers, Spoon calipers are direct fit and are designed to work with the stock brake system, including the ABS. Spoon calipers use stock Honda size brake pads, which gives users incredible flexibility in choosing pads. The 4-pot calipers significantly improve both high speed braking and brake pedal feel and its consistency during track use.\u003cbr\u003eThe 4-pot design also makes pad wear more even and minimizes rotor warpage. The aluminium construction also helps reduce un-sprung weight significantly. These benefits are achieved while maintaining a stock feel for daily driving.\u003cbr\u003eSpoon calipers are manufactured by Nissin, the OE supplier of all Honda brakes. The twin-block caliper was developed over a year specifically for the EK9 Civic Type R and DC2 Integra Type R.\u003cbr\u003ePLEASE NOTE: When installing Twin Block Calipers to the Civic EG, EK and 96 Spec DC2 a pair of Spoon 15\" Brake Rotors, Long Hub Bolts and 3mm wheel spacers are required. Due to the addition width of the caliper to accommodate the 4 piston arrangement it may interfere with the wheel. Please check with wheel manufacture for clearance.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCR-Z | ZF1 | 2010-2012 | H | LEA | I4,CR-Z | ZF2 | 2012-2018 | H | LEA | I4\u003c!--split--\u003e"}

{"id":6270601330870,"title":"STI - 6POT monoblock Brake Caliper Kit Front - Subaru Impreza WRX STI A-Line GRF Applied B-E (2007-2014)","handle":"sti-6pot-monoblock-brake-caliper-kit-front-subaru-impreza-wrx-sti-a-line-grf-applied-b-e-2007-2014-26100zr000","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: STI\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cbr\u003eBrembo 6POT monoblock front brake caliper. Multi-grooved rotors with high heat dissipation performance and STI racing brake pads (front and rear) are tuned specifically for GR IMPREZA WRX STI. This improves fade resistance during sports driving, such as on winding roads and circuits, and achieves powerful and highly reliable braking performance to support the driving performance of the IMPREZA WRX STI. The set includes calipers (Front), rotors (Front), pads (front and rear), and steel mesh hoses (front and rear), for motor sports and street.\u003cbr\u003eCaution:\u003cbr\u003e- May interfere with your current rims, STI recommends the installation of 18-inch STI spec wheels. (From BBS or ENKEI, 18 x 8 1\/2JJ +53).\u003cbr\u003e- This set was made to suit the STI Brembo rear brakes, for balanced braking. May not be suitable for other custom setups.\u003cbr\u003e- This is primarily a racing brake set, and as such it will produce more noise and vibration than your stock brakes.\u003cbr\u003e- STI parts warns may wear out faster than OEM.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- For vehicles equipped with standard brembo brake system.\u003cbr\u003e- Not compatible with R205, S206 and WRX STI(AWD\/6MT) Applied E vehicles.\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture may be generic. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - Impreza WRX STI A-Line - GRF Applied B (2009-2009) EJ255\u003cbr\u003eSubaru - Impreza WRX STI A-Line - GRF Applied C (2007-2012) EJ255\u003cbr\u003eSubaru - Impreza WRX STI A-Line - GRF Applied D (2012-2013) EJ255\u003cbr\u003eSubaru - Impreza WRX STI A-Line - GRF Applied E (2013-2014) EJ255\u003c!--split--\u003e","published_at":"2021-02-18T10:38:24+08:00","created_at":"2021-02-18T10:38:25+08:00","vendor":"STI","type":"Brake Calipers and Kits","tags":["2007","2008","2009","2010","2011","2012","2013","2014","brake-calipers-and-kits","front","impreza-wrx-sti-a-line-grf-applied-b-2009-2009-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-c-2007-2012-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-e-2013-2014-tc-ej255-h4","jp1","sti","subaru","ws110"],"price":497892,"price_min":497892,"price_max":497892,"available":true,"price_varies":false,"compare_at_price":536700,"compare_at_price_min":536700,"compare_at_price_max":536700,"compare_at_price_varies":false,"variants":[{"id":38054355501238,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"26100ZR000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"STI - 6POT monoblock Brake Caliper Kit Front - Subaru Impreza WRX STI A-Line GRF Applied B-E (2007-2014)","public_title":null,"options":["Default Title"],"price":497892,"weight":32000,"compare_at_price":536700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-6pot-monoblock-brake-caliper-kit-front-subaru-impreza-wrx-sti-a-line-grf-applied-b-e-2007-2014-rzcrew.jpg?v=1710326806"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-6pot-monoblock-brake-caliper-kit-front-subaru-impreza-wrx-sti-a-line-grf-applied-b-e-2007-2014-rzcrew.jpg?v=1710326806","options":["Title"],"media":[{"alt":"STI - 6POT monoblock Brake Caliper Kit Front - Subaru Impreza WRX STI A-Line GRF Applied B-E (2007-2014) - 26100ZR000 - Rzcrewgarage","id":25434667614390,"position":1,"preview_image":{"aspect_ratio":2.174,"height":460,"width":1000,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-6pot-monoblock-brake-caliper-kit-front-subaru-impreza-wrx-sti-a-line-grf-applied-b-e-2007-2014-rzcrew.jpg?v=1710326806"},"aspect_ratio":2.174,"height":460,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-6pot-monoblock-brake-caliper-kit-front-subaru-impreza-wrx-sti-a-line-grf-applied-b-e-2007-2014-rzcrew.jpg?v=1710326806","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: STI\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cbr\u003eBrembo 6POT monoblock front brake caliper. Multi-grooved rotors with high heat dissipation performance and STI racing brake pads (front and rear) are tuned specifically for GR IMPREZA WRX STI. This improves fade resistance during sports driving, such as on winding roads and circuits, and achieves powerful and highly reliable braking performance to support the driving performance of the IMPREZA WRX STI. The set includes calipers (Front), rotors (Front), pads (front and rear), and steel mesh hoses (front and rear), for motor sports and street.\u003cbr\u003eCaution:\u003cbr\u003e- May interfere with your current rims, STI recommends the installation of 18-inch STI spec wheels. (From BBS or ENKEI, 18 x 8 1\/2JJ +53).\u003cbr\u003e- This set was made to suit the STI Brembo rear brakes, for balanced braking. May not be suitable for other custom setups.\u003cbr\u003e- This is primarily a racing brake set, and as such it will produce more noise and vibration than your stock brakes.\u003cbr\u003e- STI parts warns may wear out faster than OEM.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- For vehicles equipped with standard brembo brake system.\u003cbr\u003e- Not compatible with R205, S206 and WRX STI(AWD\/6MT) Applied E vehicles.\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture may be generic. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - Impreza WRX STI A-Line - GRF Applied B (2009-2009) EJ255\u003cbr\u003eSubaru - Impreza WRX STI A-Line - GRF Applied C (2007-2012) EJ255\u003cbr\u003eSubaru - Impreza WRX STI A-Line - GRF Applied D (2012-2013) EJ255\u003cbr\u003eSubaru - Impreza WRX STI A-Line - GRF Applied E (2013-2014) EJ255\u003c!--split--\u003e"}

{"id":6270601396406,"title":"STI - 6POT monoblock Brake Caliper Kit Front - Subaru Impreza WRX STI A-Line GVF Applied C-E (2010-2014)","handle":"sti-6pot-monoblock-brake-caliper-kit-front-subaru-impreza-wrx-sti-a-line-gvf-applied-c-e-2010-2014-26100zr000","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: STI\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cbr\u003eBrembo 6POT monoblock front brake caliper. Multi-grooved rotors with high heat dissipation performance and STI racing brake pads (front and rear) are tuned specifically for GR IMPREZA WRX STI. This improves fade resistance during sports driving, such as on winding roads and circuits, and achieves powerful and highly reliable braking performance to support the driving performance of the IMPREZA WRX STI. The set includes calipers (Front), rotors (Front), pads (front and rear), and steel mesh hoses (front and rear), for motor sports and street.\u003cbr\u003eCaution:\u003cbr\u003e- May interfere with your current rims, STI recommends the installation of 18-inch STI spec wheels. (From BBS or ENKEI, 18 x 8 1\/2JJ +53).\u003cbr\u003e- This set was made to suit the STI Brembo rear brakes, for balanced braking. May not be suitable for other custom setups.\u003cbr\u003e- This is primarily a racing brake set, and as such it will produce more noise and vibration than your stock brakes.\u003cbr\u003e- STI parts warns may wear out faster than OEM.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- For vehicles equipped with standard brembo brake system.\u003cbr\u003e- Not compatible with R205, S206 and WRX STI(AWD\/6MT) Applied E vehicles.\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture may be generic. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - Impreza WRX STI A-Line - GVF Applied C (2010-2012) EJ255\u003cbr\u003eSubaru - Impreza WRX STI A-Line - GVF Applied D (2012-2013) EJ255\u003cbr\u003eSubaru - Impreza WRX STI A-Line - GVF Applied E (2013-2014) EJ255\u003c!--split--\u003e","published_at":"2021-02-18T10:38:25+08:00","created_at":"2021-02-18T10:38:26+08:00","vendor":"STI","type":"Brake Calipers and Kits","tags":["2010","2011","2012","2013","2014","brake-calipers-and-kits","front","impreza-wrx-sti-a-line-gvf-applied-c-2010-2012-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-e-2013-2014-tc-ej255-h4","jp1","sti","subaru","ws110"],"price":497892,"price_min":497892,"price_max":497892,"available":true,"price_varies":false,"compare_at_price":536700,"compare_at_price_min":536700,"compare_at_price_max":536700,"compare_at_price_varies":false,"variants":[{"id":38054355566774,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"26100ZR000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"STI - 6POT monoblock Brake Caliper Kit Front - Subaru Impreza WRX STI A-Line GVF Applied C-E (2010-2014)","public_title":null,"options":["Default Title"],"price":497892,"weight":32000,"compare_at_price":536700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-6pot-monoblock-brake-caliper-kit-front-subaru-impreza-wrx-sti-a-line-gvf-applied-c-e-2010-2014-rzcrew.jpg?v=1710326806"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-6pot-monoblock-brake-caliper-kit-front-subaru-impreza-wrx-sti-a-line-gvf-applied-c-e-2010-2014-rzcrew.jpg?v=1710326806","options":["Title"],"media":[{"alt":"STI - 6POT monoblock Brake Caliper Kit Front - Subaru Impreza WRX STI A-Line GVF Applied C-E (2010-2014) - 26100ZR000 - Rzcrewgarage","id":25434667942070,"position":1,"preview_image":{"aspect_ratio":2.174,"height":460,"width":1000,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-6pot-monoblock-brake-caliper-kit-front-subaru-impreza-wrx-sti-a-line-gvf-applied-c-e-2010-2014-rzcrew.jpg?v=1710326806"},"aspect_ratio":2.174,"height":460,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-6pot-monoblock-brake-caliper-kit-front-subaru-impreza-wrx-sti-a-line-gvf-applied-c-e-2010-2014-rzcrew.jpg?v=1710326806","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: STI\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cbr\u003eBrembo 6POT monoblock front brake caliper. Multi-grooved rotors with high heat dissipation performance and STI racing brake pads (front and rear) are tuned specifically for GR IMPREZA WRX STI. This improves fade resistance during sports driving, such as on winding roads and circuits, and achieves powerful and highly reliable braking performance to support the driving performance of the IMPREZA WRX STI. The set includes calipers (Front), rotors (Front), pads (front and rear), and steel mesh hoses (front and rear), for motor sports and street.\u003cbr\u003eCaution:\u003cbr\u003e- May interfere with your current rims, STI recommends the installation of 18-inch STI spec wheels. (From BBS or ENKEI, 18 x 8 1\/2JJ +53).\u003cbr\u003e- This set was made to suit the STI Brembo rear brakes, for balanced braking. May not be suitable for other custom setups.\u003cbr\u003e- This is primarily a racing brake set, and as such it will produce more noise and vibration than your stock brakes.\u003cbr\u003e- STI parts warns may wear out faster than OEM.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- For vehicles equipped with standard brembo brake system.\u003cbr\u003e- Not compatible with R205, S206 and WRX STI(AWD\/6MT) Applied E vehicles.\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture may be generic. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - Impreza WRX STI A-Line - GVF Applied C (2010-2012) EJ255\u003cbr\u003eSubaru - Impreza WRX STI A-Line - GVF Applied D (2012-2013) EJ255\u003cbr\u003eSubaru - Impreza WRX STI A-Line - GVF Applied E (2013-2014) EJ255\u003c!--split--\u003e"}

{"id":6270601527478,"title":"STI - 6POT monoblock Brake Caliper Kit Front - Subaru Impreza WRX STI GRB Applied A-E (2007-2014)","handle":"sti-6pot-monoblock-brake-caliper-kit-front-subaru-impreza-wrx-sti-grb-applied-a-e-2007-2014-26100zr000","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: STI\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cbr\u003eBrembo 6POT monoblock front brake caliper. Multi-grooved rotors with high heat dissipation performance and STI racing brake pads (front and rear) are tuned specifically for GR IMPREZA WRX STI. This improves fade resistance during sports driving, such as on winding roads and circuits, and achieves powerful and highly reliable braking performance to support the driving performance of the IMPREZA WRX STI. The set includes calipers (Front), rotors (Front), pads (front and rear), and steel mesh hoses (front and rear), for motor sports and street.\u003cbr\u003eCaution:\u003cbr\u003e- May interfere with your current rims, STI recommends the installation of 18-inch STI spec wheels. (From BBS or ENKEI, 18 x 8 1\/2JJ +53).\u003cbr\u003e- This set was made to suit the STI Brembo rear brakes, for balanced braking. May not be suitable for other custom setups.\u003cbr\u003e- This is primarily a racing brake set, and as such it will produce more noise and vibration than your stock brakes.\u003cbr\u003e- STI parts warns may wear out faster than OEM.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- For vehicles equipped with standard brembo brake system.\u003cbr\u003e- Not compatible with R205, S206 and WRX STI(AWD\/6MT) Applied E vehicles.\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture may be generic. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - Impreza WRX STI - GRB Applied A (2007-2009) EJ207\u003cbr\u003eSubaru - Impreza WRX STI - GRB Applied B (2009-2009) EJ207\u003cbr\u003eSubaru - Impreza WRX STI - GRB Applied C (2010-2012) EJ207\u003cbr\u003eSubaru - Impreza WRX STI - GRB Applied D (2012-2013) EJ207\u003cbr\u003eSubaru - Impreza WRX STI - GRB Applied E (2013-2014) EJ207\u003c!--split--\u003e","published_at":"2021-02-18T10:38:28+08:00","created_at":"2021-02-18T10:38:28+08:00","vendor":"STI","type":"Brake Calipers and Kits","tags":["2007","2008","2009","2010","2011","2012","2013","2014","brake-calipers-and-kits","front","impreza-wrx-sti-grb-applied-a-2007-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-b-2009-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-c-2010-2012-tc-ej207-h4","impreza-wrx-sti-grb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-grb-applied-e-2013-2014-tc-ej207-h4","jp1","sti","subaru","ws110"],"price":497892,"price_min":497892,"price_max":497892,"available":true,"price_varies":false,"compare_at_price":536700,"compare_at_price_min":536700,"compare_at_price_max":536700,"compare_at_price_varies":false,"variants":[{"id":38054355697846,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"26100ZR000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"STI - 6POT monoblock Brake Caliper Kit Front - Subaru Impreza WRX STI GRB Applied A-E (2007-2014)","public_title":null,"options":["Default Title"],"price":497892,"weight":32000,"compare_at_price":536700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-6pot-monoblock-brake-caliper-kit-front-subaru-impreza-wrx-sti-grb-applied-a-e-2007-2014-rzcrew.jpg?v=1710326804"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-6pot-monoblock-brake-caliper-kit-front-subaru-impreza-wrx-sti-grb-applied-a-e-2007-2014-rzcrew.jpg?v=1710326804","options":["Title"],"media":[{"alt":"STI - 6POT monoblock Brake Caliper Kit Front - Subaru Impreza WRX STI GRB Applied A-E (2007-2014) - 26100ZR000 - Rzcrewgarage","id":25434668302518,"position":1,"preview_image":{"aspect_ratio":2.174,"height":460,"width":1000,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-6pot-monoblock-brake-caliper-kit-front-subaru-impreza-wrx-sti-grb-applied-a-e-2007-2014-rzcrew.jpg?v=1710326804"},"aspect_ratio":2.174,"height":460,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-6pot-monoblock-brake-caliper-kit-front-subaru-impreza-wrx-sti-grb-applied-a-e-2007-2014-rzcrew.jpg?v=1710326804","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: STI\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cbr\u003eBrembo 6POT monoblock front brake caliper. Multi-grooved rotors with high heat dissipation performance and STI racing brake pads (front and rear) are tuned specifically for GR IMPREZA WRX STI. This improves fade resistance during sports driving, such as on winding roads and circuits, and achieves powerful and highly reliable braking performance to support the driving performance of the IMPREZA WRX STI. The set includes calipers (Front), rotors (Front), pads (front and rear), and steel mesh hoses (front and rear), for motor sports and street.\u003cbr\u003eCaution:\u003cbr\u003e- May interfere with your current rims, STI recommends the installation of 18-inch STI spec wheels. (From BBS or ENKEI, 18 x 8 1\/2JJ +53).\u003cbr\u003e- This set was made to suit the STI Brembo rear brakes, for balanced braking. May not be suitable for other custom setups.\u003cbr\u003e- This is primarily a racing brake set, and as such it will produce more noise and vibration than your stock brakes.\u003cbr\u003e- STI parts warns may wear out faster than OEM.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- For vehicles equipped with standard brembo brake system.\u003cbr\u003e- Not compatible with R205, S206 and WRX STI(AWD\/6MT) Applied E vehicles.\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture may be generic. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - Impreza WRX STI - GRB Applied A (2007-2009) EJ207\u003cbr\u003eSubaru - Impreza WRX STI - GRB Applied B (2009-2009) EJ207\u003cbr\u003eSubaru - Impreza WRX STI - GRB Applied C (2010-2012) EJ207\u003cbr\u003eSubaru - Impreza WRX STI - GRB Applied D (2012-2013) EJ207\u003cbr\u003eSubaru - Impreza WRX STI - GRB Applied E (2013-2014) EJ207\u003c!--split--\u003e"}

{"id":6270601593014,"title":"STI - 6POT monoblock Brake Caliper Kit Front - Subaru Impreza WRX STI GVB Applied C-E (2007-2014)","handle":"sti-6pot-monoblock-brake-caliper-kit-front-subaru-impreza-wrx-sti-gvb-applied-c-e-2007-2014-26100zr000","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: STI\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cbr\u003eBrembo 6POT monoblock front brake caliper. Multi-grooved rotors with high heat dissipation performance and STI racing brake pads (front and rear) are tuned specifically for GR IMPREZA WRX STI. This improves fade resistance during sports driving, such as on winding roads and circuits, and achieves powerful and highly reliable braking performance to support the driving performance of the IMPREZA WRX STI. The set includes calipers (Front), rotors (Front), pads (front and rear), and steel mesh hoses (front and rear), for motor sports and street.\u003cbr\u003eCaution:\u003cbr\u003e- May interfere with your current rims, STI recommends the installation of 18-inch STI spec wheels. (From BBS or ENKEI, 18 x 8 1\/2JJ +53).\u003cbr\u003e- This set was made to suit the STI Brembo rear brakes, for balanced braking. May not be suitable for other custom setups.\u003cbr\u003e- This is primarily a racing brake set, and as such it will produce more noise and vibration than your stock brakes.\u003cbr\u003e- STI parts warns may wear out faster than OEM.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- For vehicles equipped with standard brembo brake system.\u003cbr\u003e- Not compatible with R205, S206 and WRX STI(AWD\/6MT) Applied E vehicles.\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture may be generic. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - Impreza WRX STI - GVB Applied C (2007-2012) EJ207\u003cbr\u003eSubaru - Impreza WRX STI - GVB Applied D (2012-2013) EJ207\u003cbr\u003eSubaru - Impreza WRX STI - GVB Applied E (2013-2014) EJ207\u003c!--split--\u003e","published_at":"2021-02-18T10:38:29+08:00","created_at":"2021-02-18T10:38:29+08:00","vendor":"STI","type":"Brake Calipers and Kits","tags":["2007","2008","2009","2010","2011","2012","2013","2014","brake-calipers-and-kits","front","impreza-wrx-sti-gvb-applied-c-2007-2012-tc-ej207-h4","impreza-wrx-sti-gvb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-gvb-applied-e-2013-2014-tc-ej207-h4","jp1","sti","subaru","ws110"],"price":497892,"price_min":497892,"price_max":497892,"available":true,"price_varies":false,"compare_at_price":536700,"compare_at_price_min":536700,"compare_at_price_max":536700,"compare_at_price_varies":false,"variants":[{"id":38054355763382,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"26100ZR000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"STI - 6POT monoblock Brake Caliper Kit Front - Subaru Impreza WRX STI GVB Applied C-E (2007-2014)","public_title":null,"options":["Default Title"],"price":497892,"weight":32000,"compare_at_price":536700,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-6pot-monoblock-brake-caliper-kit-front-subaru-impreza-wrx-sti-gvb-applied-c-e-2007-2014-rzcrew.jpg?v=1710326805"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-6pot-monoblock-brake-caliper-kit-front-subaru-impreza-wrx-sti-gvb-applied-c-e-2007-2014-rzcrew.jpg?v=1710326805","options":["Title"],"media":[{"alt":"STI - 6POT monoblock Brake Caliper Kit Front - Subaru Impreza WRX STI GVB Applied C-E (2007-2014) - 26100ZR000 - Rzcrewgarage","id":25434668794038,"position":1,"preview_image":{"aspect_ratio":2.174,"height":460,"width":1000,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-6pot-monoblock-brake-caliper-kit-front-subaru-impreza-wrx-sti-gvb-applied-c-e-2007-2014-rzcrew.jpg?v=1710326805"},"aspect_ratio":2.174,"height":460,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-6pot-monoblock-brake-caliper-kit-front-subaru-impreza-wrx-sti-gvb-applied-c-e-2007-2014-rzcrew.jpg?v=1710326805","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: STI\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cbr\u003eBrembo 6POT monoblock front brake caliper. Multi-grooved rotors with high heat dissipation performance and STI racing brake pads (front and rear) are tuned specifically for GR IMPREZA WRX STI. This improves fade resistance during sports driving, such as on winding roads and circuits, and achieves powerful and highly reliable braking performance to support the driving performance of the IMPREZA WRX STI. The set includes calipers (Front), rotors (Front), pads (front and rear), and steel mesh hoses (front and rear), for motor sports and street.\u003cbr\u003eCaution:\u003cbr\u003e- May interfere with your current rims, STI recommends the installation of 18-inch STI spec wheels. (From BBS or ENKEI, 18 x 8 1\/2JJ +53).\u003cbr\u003e- This set was made to suit the STI Brembo rear brakes, for balanced braking. May not be suitable for other custom setups.\u003cbr\u003e- This is primarily a racing brake set, and as such it will produce more noise and vibration than your stock brakes.\u003cbr\u003e- STI parts warns may wear out faster than OEM.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- For vehicles equipped with standard brembo brake system.\u003cbr\u003e- Not compatible with R205, S206 and WRX STI(AWD\/6MT) Applied E vehicles.\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture may be generic. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - Impreza WRX STI - GVB Applied C (2007-2012) EJ207\u003cbr\u003eSubaru - Impreza WRX STI - GVB Applied D (2012-2013) EJ207\u003cbr\u003eSubaru - Impreza WRX STI - GVB Applied E (2013-2014) EJ207\u003c!--split--\u003e"}

{"id":6271364497590,"title":"STI - Flexible Draw Front Tower Bar - Subaru Legacy B4 BM9\/BM9 (2009-2014)","handle":"sti-flexible-draw-front-tower-bar-subaru-legacy-b4-bm9-bm9-2009-2014-st20522ez000","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: STI\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003eType: Flexible Draw\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- The design of the tension adjustment gauge allows you to use it as a key holder or a similar accessory.\u003cbr\u003e- Applied D and E vehicles: STI recommends installing this item in combination with the Rear Stay Kit (Part Number: ST57830ST000) for maximum performance.Contrary to popular belief, having the stiffest possible suspension is not the way to optimum performance, as this may cause uneven weight distribution when cornering, leading to a considerable loss of traction. So how do we lock the struts and stiffen up the body without losing the dynamic flexing? This product adds the features of a draw stiffener to the flexible tower bar, a body stiffening component developed specially by STI. Applying tension to the tower bar in advance increases the steering responsiveness even during slight steering operation.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - Legacy B4 - BM9 (2009-2014) EJ25 Turbo\u003cbr\u003eSubaru - Legacy B4 - BM9 (2009-2014) EJ25\u003c!--split--\u003e","published_at":"2021-02-18T16:59:16+08:00","created_at":"2021-02-18T16:59:17+08:00","vendor":"STI","type":"Bars and Braces","tags":["2009","2010","2011","2012","2013","2014","bars-and-braces","front","legacy-b4-bm9-ej25-na-2009-2014-na-ej25-h4","legacy-b4-bm9-ej25-turbo-2009-2014-na-ej25-h4","sti","subaru","ws15"],"price":46717,"price_min":46717,"price_max":46717,"available":true,"price_varies":false,"compare_at_price":46800,"compare_at_price_min":46800,"compare_at_price_max":46800,"compare_at_price_varies":false,"variants":[{"id":38055875772598,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ST20522EZ000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"STI - Flexible Draw Front Tower Bar - Subaru Legacy B4 BM9\/BM9 (2009-2014)","public_title":null,"options":["Default Title"],"price":46717,"weight":7000,"compare_at_price":46800,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-draw-front-tower-bar-subaru-legacy-b4-bm9bm9-2009-2014-rzcrew.jpg?v=1710326619"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-draw-front-tower-bar-subaru-legacy-b4-bm9bm9-2009-2014-rzcrew.jpg?v=1710326619","options":["Title"],"media":[{"alt":"STI - Flexible Draw Front Tower Bar - Subaru Legacy B4 BM9\/BM9 (2009-2014) - ST20522EZ000 - Rzcrewgarage","id":25433899991222,"position":1,"preview_image":{"aspect_ratio":2.174,"height":460,"width":1000,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-draw-front-tower-bar-subaru-legacy-b4-bm9bm9-2009-2014-rzcrew.jpg?v=1710326619"},"aspect_ratio":2.174,"height":460,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-draw-front-tower-bar-subaru-legacy-b4-bm9bm9-2009-2014-rzcrew.jpg?v=1710326619","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: STI\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003eType: Flexible Draw\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- The design of the tension adjustment gauge allows you to use it as a key holder or a similar accessory.\u003cbr\u003e- Applied D and E vehicles: STI recommends installing this item in combination with the Rear Stay Kit (Part Number: ST57830ST000) for maximum performance.Contrary to popular belief, having the stiffest possible suspension is not the way to optimum performance, as this may cause uneven weight distribution when cornering, leading to a considerable loss of traction. So how do we lock the struts and stiffen up the body without losing the dynamic flexing? This product adds the features of a draw stiffener to the flexible tower bar, a body stiffening component developed specially by STI. Applying tension to the tower bar in advance increases the steering responsiveness even during slight steering operation.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - Legacy B4 - BM9 (2009-2014) EJ25 Turbo\u003cbr\u003eSubaru - Legacy B4 - BM9 (2009-2014) EJ25\u003c!--split--\u003e"}

{"id":6271364661430,"title":"STI - Flexible Draw Front Tower Bar - Subaru Legacy Outback BR9 Applied A-C (2009-2012)","handle":"sti-flexible-draw-front-tower-bar-subaru-legacy-outback-br9-applied-a-c-2009-2012-st20522ez000","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: STI\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003eType: Flexible Draw\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- The design of the tension adjustment gauge allows you to use it as a key holder or a similar accessory.\u003cbr\u003e- Applied D and E vehicles: STI recommends installing this item in combination with the Rear Stay Kit (Part Number: ST57830ST000) for maximum performance.Contrary to popular belief, having the stiffest possible suspension is not the way to optimum performance, as this may cause uneven weight distribution when cornering, leading to a considerable loss of traction. So how do we lock the struts and stiffen up the body without losing the dynamic flexing? This product adds the features of a draw stiffener to the flexible tower bar, a body stiffening component developed specially by STI. Applying tension to the tower bar in advance increases the steering responsiveness even during slight steering operation.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - Legacy Outback - BR9 Applied A (2009-2010) EJ25\u003cbr\u003eSubaru - Legacy Outback - BR9 Applied B (2010-2011) EJ25\u003cbr\u003eSubaru - Legacy Outback - BR9 Applied C (2011-2012) EJ25\u003c!--split--\u003e","published_at":"2021-02-18T16:59:20+08:00","created_at":"2021-02-18T16:59:21+08:00","vendor":"STI","type":"Bars and Braces","tags":["2009","2010","2011","2012","bars-and-braces","front","legacy-outback-br9-applied-a-2009-2010-na-ej25-h4","legacy-outback-br9-applied-b-2010-2011-na-ej25-h4","legacy-outback-br9-applied-c-2011-2012-na-ej25-h4","sti","subaru","ws15"],"price":46717,"price_min":46717,"price_max":46717,"available":true,"price_varies":false,"compare_at_price":46800,"compare_at_price_min":46800,"compare_at_price_max":46800,"compare_at_price_varies":false,"variants":[{"id":38055875903670,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ST20522EZ000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"STI - Flexible Draw Front Tower Bar - Subaru Legacy Outback BR9 Applied A-C (2009-2012)","public_title":null,"options":["Default Title"],"price":46717,"weight":7000,"compare_at_price":46800,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-draw-front-tower-bar-subaru-legacy-outback-br9-applied-a-c-2009-2012-rzcrew.jpg?v=1710326620"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-draw-front-tower-bar-subaru-legacy-outback-br9-applied-a-c-2009-2012-rzcrew.jpg?v=1710326620","options":["Title"],"media":[{"alt":"STI - Flexible Draw Front Tower Bar - Subaru Legacy Outback BR9 Applied A-C (2009-2012) - ST20522EZ000 - Rzcrewgarage","id":25433900613814,"position":1,"preview_image":{"aspect_ratio":2.174,"height":460,"width":1000,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-draw-front-tower-bar-subaru-legacy-outback-br9-applied-a-c-2009-2012-rzcrew.jpg?v=1710326620"},"aspect_ratio":2.174,"height":460,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-draw-front-tower-bar-subaru-legacy-outback-br9-applied-a-c-2009-2012-rzcrew.jpg?v=1710326620","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: STI\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003eType: Flexible Draw\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- The design of the tension adjustment gauge allows you to use it as a key holder or a similar accessory.\u003cbr\u003e- Applied D and E vehicles: STI recommends installing this item in combination with the Rear Stay Kit (Part Number: ST57830ST000) for maximum performance.Contrary to popular belief, having the stiffest possible suspension is not the way to optimum performance, as this may cause uneven weight distribution when cornering, leading to a considerable loss of traction. So how do we lock the struts and stiffen up the body without losing the dynamic flexing? This product adds the features of a draw stiffener to the flexible tower bar, a body stiffening component developed specially by STI. Applying tension to the tower bar in advance increases the steering responsiveness even during slight steering operation.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - Legacy Outback - BR9 Applied A (2009-2010) EJ25\u003cbr\u003eSubaru - Legacy Outback - BR9 Applied B (2010-2011) EJ25\u003cbr\u003eSubaru - Legacy Outback - BR9 Applied C (2011-2012) EJ25\u003c!--split--\u003e"}

{"id":6271364923574,"title":"STI - Flexible Draw Front Tower Bar - Subaru Legacy Outback BRF Applied A-E (2009-2014)","handle":"sti-flexible-draw-front-tower-bar-subaru-legacy-outback-brf-applied-a-e-2009-2014-st20522ez000","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: STI\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003eType: Flexible Draw\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- The design of the tension adjustment gauge allows you to use it as a key holder or a similar accessory.\u003cbr\u003e- Applied D and E vehicles: STI recommends installing this item in combination with the Rear Stay Kit (Part Number: ST57830ST000) for maximum performance.Contrary to popular belief, having the stiffest possible suspension is not the way to optimum performance, as this may cause uneven weight distribution when cornering, leading to a considerable loss of traction. So how do we lock the struts and stiffen up the body without losing the dynamic flexing? This product adds the features of a draw stiffener to the flexible tower bar, a body stiffening component developed specially by STI. Applying tension to the tower bar in advance increases the steering responsiveness even during slight steering operation.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - Legacy Outback - BRF Applied A (2009-2010) EZ36\u003cbr\u003eSubaru - Legacy Outback - BRF Applied B (2010-2011) EZ36\u003cbr\u003eSubaru - Legacy Outback - BRF Applied C (2011-2012) EZ36\u003cbr\u003eSubaru - Legacy Outback - BRF Applied D (2012-2013) EZ36\u003cbr\u003eSubaru - Legacy Outback - BRF Applied E (2013-2014) EZ36\u003c!--split--\u003e","published_at":"2021-02-18T16:59:22+08:00","created_at":"2021-02-18T16:59:23+08:00","vendor":"STI","type":"Bars and Braces","tags":["2009","2010","2011","2012","2013","2014","bars-and-braces","front","legacy-outback-brf-applied-a-2009-2010-na-ez36-h6","legacy-outback-brf-applied-b-2010-2011-na-ez36-h6","legacy-outback-brf-applied-c-2011-2012-na-ez36-h6","legacy-outback-brf-applied-d-2012-2013-na-ez36-h6","legacy-outback-brf-applied-e-2013-2014-na-ez36-h6","sti","subaru","ws15"],"price":46717,"price_min":46717,"price_max":46717,"available":true,"price_varies":false,"compare_at_price":46800,"compare_at_price_min":46800,"compare_at_price_max":46800,"compare_at_price_varies":false,"variants":[{"id":38055876001974,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ST20522EZ000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"STI - Flexible Draw Front Tower Bar - Subaru Legacy Outback BRF Applied A-E (2009-2014)","public_title":null,"options":["Default Title"],"price":46717,"weight":7000,"compare_at_price":46800,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-draw-front-tower-bar-subaru-legacy-outback-brf-applied-a-e-2009-2014-rzcrew.jpg?v=1710326618"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-draw-front-tower-bar-subaru-legacy-outback-brf-applied-a-e-2009-2014-rzcrew.jpg?v=1710326618","options":["Title"],"media":[{"alt":"STI - Flexible Draw Front Tower Bar - Subaru Legacy Outback BRF Applied A-E (2009-2014) - ST20522EZ000 - Rzcrewgarage","id":25433900777654,"position":1,"preview_image":{"aspect_ratio":2.174,"height":460,"width":1000,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-draw-front-tower-bar-subaru-legacy-outback-brf-applied-a-e-2009-2014-rzcrew.jpg?v=1710326618"},"aspect_ratio":2.174,"height":460,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-draw-front-tower-bar-subaru-legacy-outback-brf-applied-a-e-2009-2014-rzcrew.jpg?v=1710326618","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: STI\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003eType: Flexible Draw\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- The design of the tension adjustment gauge allows you to use it as a key holder or a similar accessory.\u003cbr\u003e- Applied D and E vehicles: STI recommends installing this item in combination with the Rear Stay Kit (Part Number: ST57830ST000) for maximum performance.Contrary to popular belief, having the stiffest possible suspension is not the way to optimum performance, as this may cause uneven weight distribution when cornering, leading to a considerable loss of traction. So how do we lock the struts and stiffen up the body without losing the dynamic flexing? This product adds the features of a draw stiffener to the flexible tower bar, a body stiffening component developed specially by STI. Applying tension to the tower bar in advance increases the steering responsiveness even during slight steering operation.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - Legacy Outback - BRF Applied A (2009-2010) EZ36\u003cbr\u003eSubaru - Legacy Outback - BRF Applied B (2010-2011) EZ36\u003cbr\u003eSubaru - Legacy Outback - BRF Applied C (2011-2012) EZ36\u003cbr\u003eSubaru - Legacy Outback - BRF Applied D (2012-2013) EZ36\u003cbr\u003eSubaru - Legacy Outback - BRF Applied E (2013-2014) EZ36\u003c!--split--\u003e"}

{"id":6271365218486,"title":"STI - Flexible Draw Front Tower Bar - Subaru Legacy Touring Wagon BR9\/BR9 (2009-2014)","handle":"sti-flexible-draw-front-tower-bar-subaru-legacy-touring-wagon-br9-br9-2009-2014-st20522ez000","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: STI\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003eType: Flexible Draw\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- The design of the tension adjustment gauge allows you to use it as a key holder or a similar accessory.\u003cbr\u003e- Applied D and E vehicles: STI recommends installing this item in combination with the Rear Stay Kit (Part Number: ST57830ST000) for maximum performance.Contrary to popular belief, having the stiffest possible suspension is not the way to optimum performance, as this may cause uneven weight distribution when cornering, leading to a considerable loss of traction. So how do we lock the struts and stiffen up the body without losing the dynamic flexing? This product adds the features of a draw stiffener to the flexible tower bar, a body stiffening component developed specially by STI. Applying tension to the tower bar in advance increases the steering responsiveness even during slight steering operation.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - Legacy Touring Wagon - BR9 (2009-2014) EJ25\u003cbr\u003eSubaru - Legacy Touring Wagon - BR9 (2009-2014) EJ255\u003c!--split--\u003e","published_at":"2021-02-18T16:59:25+08:00","created_at":"2021-02-18T16:59:26+08:00","vendor":"STI","type":"Bars and Braces","tags":["2009","2010","2011","2012","2013","2014","bars-and-braces","front","legacy-touring-wagon-br9-2009-2014-na-ej25-h4","legacy-touring-wagon-br9-2009-2014-tc-ej255-h4","sti","subaru","ws15"],"price":46717,"price_min":46717,"price_max":46717,"available":true,"price_varies":false,"compare_at_price":46800,"compare_at_price_min":46800,"compare_at_price_max":46800,"compare_at_price_varies":false,"variants":[{"id":38055876296886,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ST20522EZ000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"STI - Flexible Draw Front Tower Bar - Subaru Legacy Touring Wagon BR9\/BR9 (2009-2014)","public_title":null,"options":["Default Title"],"price":46717,"weight":7000,"compare_at_price":46800,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-draw-front-tower-bar-subaru-legacy-touring-wagon-br9br9-2009-2014-rzcrew.jpg?v=1710326618"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-draw-front-tower-bar-subaru-legacy-touring-wagon-br9br9-2009-2014-rzcrew.jpg?v=1710326618","options":["Title"],"media":[{"alt":"STI - Flexible Draw Front Tower Bar - Subaru Legacy Touring Wagon BR9\/BR9 (2009-2014) - ST20522EZ000 - Rzcrewgarage","id":25433901498550,"position":1,"preview_image":{"aspect_ratio":2.174,"height":460,"width":1000,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-draw-front-tower-bar-subaru-legacy-touring-wagon-br9br9-2009-2014-rzcrew.jpg?v=1710326618"},"aspect_ratio":2.174,"height":460,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-draw-front-tower-bar-subaru-legacy-touring-wagon-br9br9-2009-2014-rzcrew.jpg?v=1710326618","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: STI\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003eType: Flexible Draw\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- The design of the tension adjustment gauge allows you to use it as a key holder or a similar accessory.\u003cbr\u003e- Applied D and E vehicles: STI recommends installing this item in combination with the Rear Stay Kit (Part Number: ST57830ST000) for maximum performance.Contrary to popular belief, having the stiffest possible suspension is not the way to optimum performance, as this may cause uneven weight distribution when cornering, leading to a considerable loss of traction. So how do we lock the struts and stiffen up the body without losing the dynamic flexing? This product adds the features of a draw stiffener to the flexible tower bar, a body stiffening component developed specially by STI. Applying tension to the tower bar in advance increases the steering responsiveness even during slight steering operation.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - Legacy Touring Wagon - BR9 (2009-2014) EJ25\u003cbr\u003eSubaru - Legacy Touring Wagon - BR9 (2009-2014) EJ255\u003c!--split--\u003e"}

{"id":6271347065014,"title":"STI - Flexible Draw Stiffener Front - Subaru Impreza WRX STI A-Line GRF Applied B-E (2007-2014)","handle":"sti-flexible-draw-stiffener-front-subaru-impreza-wrx-sti-a-line-grf-applied-b-e-2007-2014-st20118zr000","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: STI\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003eIncluded: 2 pieces (Left and Right)\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- This product cannot be installed in combination with the Flexible Lower Arm Bar (Part Number: ST20512ZR010).\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- Not compatible with STI TS Type RA, STI 20th Anniversary and R205 vehicles.This STI original sports performance part applies moderate tension between the vehicle body and cross member to prevent the chassis from bending when you drive the vehicle. This results in agile and responsive initial steering, as well as a comfortable ride. The vehicle will boast better grip on all four wheels, improved stability when cornering, and also fast and responsive steering performance.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - Impreza WRX STI A-Line - GRF Applied B (2009-2009) EJ255\u003cbr\u003eSubaru - Impreza WRX STI A-Line - GRF Applied C (2007-2012) EJ255\u003cbr\u003eSubaru - Impreza WRX STI A-Line - GRF Applied D (2012-2013) EJ255\u003cbr\u003eSubaru - Impreza WRX STI A-Line - GRF Applied E (2013-2014) EJ255\u003c!--split--\u003e","published_at":"2021-02-18T16:52:08+08:00","created_at":"2021-02-18T16:52:09+08:00","vendor":"STI","type":"Bars and Braces","tags":["2-points","2007","2008","2009","2010","2011","2012","2013","2014","bars-and-braces","braces","front","impreza-wrx-sti-a-line-grf-applied-b-2009-2009-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-c-2007-2012-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-e-2013-2014-tc-ej255-h4","sti","subaru","ws15"],"price":46717,"price_min":46717,"price_max":46717,"available":true,"price_varies":false,"compare_at_price":46800,"compare_at_price_min":46800,"compare_at_price_max":46800,"compare_at_price_varies":false,"variants":[{"id":38055831011510,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ST20118ZR000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"STI - Flexible Draw Stiffener Front - Subaru Impreza WRX STI A-Line GRF Applied B-E (2007-2014)","public_title":null,"options":["Default Title"],"price":46717,"weight":8000,"compare_at_price":46800,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-draw-stiffener-front-subaru-impreza-wrx-sti-a-line-grf-applied-b-e-2007-2014-rzcrew.png?v=1710326753"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-draw-stiffener-front-subaru-impreza-wrx-sti-a-line-grf-applied-b-e-2007-2014-rzcrew.png?v=1710326753","options":["Title"],"media":[{"alt":"STI - Flexible Draw Stiffener Front - Subaru Impreza WRX STI A-Line GRF Applied B-E (2007-2014) - ST20118ZR000 - Rzcrewgarage","id":25433863225526,"position":1,"preview_image":{"aspect_ratio":1.538,"height":426,"width":655,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-draw-stiffener-front-subaru-impreza-wrx-sti-a-line-grf-applied-b-e-2007-2014-rzcrew.png?v=1710326753"},"aspect_ratio":1.538,"height":426,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-draw-stiffener-front-subaru-impreza-wrx-sti-a-line-grf-applied-b-e-2007-2014-rzcrew.png?v=1710326753","width":655}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: STI\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003eIncluded: 2 pieces (Left and Right)\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- This product cannot be installed in combination with the Flexible Lower Arm Bar (Part Number: ST20512ZR010).\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- Not compatible with STI TS Type RA, STI 20th Anniversary and R205 vehicles.This STI original sports performance part applies moderate tension between the vehicle body and cross member to prevent the chassis from bending when you drive the vehicle. This results in agile and responsive initial steering, as well as a comfortable ride. The vehicle will boast better grip on all four wheels, improved stability when cornering, and also fast and responsive steering performance.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - Impreza WRX STI A-Line - GRF Applied B (2009-2009) EJ255\u003cbr\u003eSubaru - Impreza WRX STI A-Line - GRF Applied C (2007-2012) EJ255\u003cbr\u003eSubaru - Impreza WRX STI A-Line - GRF Applied D (2012-2013) EJ255\u003cbr\u003eSubaru - Impreza WRX STI A-Line - GRF Applied E (2013-2014) EJ255\u003c!--split--\u003e"}

{"id":6271347097782,"title":"STI - Flexible Draw Stiffener Front - Subaru Impreza WRX STI A-Line GVF Applied C-E (2010-2014)","handle":"sti-flexible-draw-stiffener-front-subaru-impreza-wrx-sti-a-line-gvf-applied-c-e-2010-2014-st20118zr000","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: STI\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003eIncluded: 2 pieces (Left and Right)\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- This product cannot be installed in combination with the Flexible Lower Arm Bar (Part Number: ST20512ZR010).\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- Not compatible with STI TS Type RA, STI 20th Anniversary and R205 vehicles.This STI original sports performance part applies moderate tension between the vehicle body and cross member to prevent the chassis from bending when you drive the vehicle. This results in agile and responsive initial steering, as well as a comfortable ride. The vehicle will boast better grip on all four wheels, improved stability when cornering, and also fast and responsive steering performance.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - Impreza WRX STI A-Line - GVF Applied C (2010-2012) EJ255\u003cbr\u003eSubaru - Impreza WRX STI A-Line - GVF Applied D (2012-2013) EJ255\u003cbr\u003eSubaru - Impreza WRX STI A-Line - GVF Applied E (2013-2014) EJ255\u003c!--split--\u003e","published_at":"2021-02-18T16:52:10+08:00","created_at":"2021-02-18T16:52:11+08:00","vendor":"STI","type":"Bars and Braces","tags":["2-points","2010","2011","2012","2013","2014","bars-and-braces","braces","front","impreza-wrx-sti-a-line-gvf-applied-c-2010-2012-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-e-2013-2014-tc-ej255-h4","sti","subaru","ws15"],"price":46717,"price_min":46717,"price_max":46717,"available":true,"price_varies":false,"compare_at_price":46800,"compare_at_price_min":46800,"compare_at_price_max":46800,"compare_at_price_varies":false,"variants":[{"id":38055831077046,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ST20118ZR000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"STI - Flexible Draw Stiffener Front - Subaru Impreza WRX STI A-Line GVF Applied C-E (2010-2014)","public_title":null,"options":["Default Title"],"price":46717,"weight":8000,"compare_at_price":46800,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-draw-stiffener-front-subaru-impreza-wrx-sti-a-line-gvf-applied-c-e-2010-2014-rzcrew.png?v=1710326753"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-draw-stiffener-front-subaru-impreza-wrx-sti-a-line-gvf-applied-c-e-2010-2014-rzcrew.png?v=1710326753","options":["Title"],"media":[{"alt":"STI - Flexible Draw Stiffener Front - Subaru Impreza WRX STI A-Line GVF Applied C-E (2010-2014) - ST20118ZR000 - Rzcrewgarage","id":25433863389366,"position":1,"preview_image":{"aspect_ratio":1.538,"height":426,"width":655,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-draw-stiffener-front-subaru-impreza-wrx-sti-a-line-gvf-applied-c-e-2010-2014-rzcrew.png?v=1710326753"},"aspect_ratio":1.538,"height":426,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-draw-stiffener-front-subaru-impreza-wrx-sti-a-line-gvf-applied-c-e-2010-2014-rzcrew.png?v=1710326753","width":655}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: STI\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003eIncluded: 2 pieces (Left and Right)\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- This product cannot be installed in combination with the Flexible Lower Arm Bar (Part Number: ST20512ZR010).\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- Not compatible with STI TS Type RA, STI 20th Anniversary and R205 vehicles.This STI original sports performance part applies moderate tension between the vehicle body and cross member to prevent the chassis from bending when you drive the vehicle. This results in agile and responsive initial steering, as well as a comfortable ride. The vehicle will boast better grip on all four wheels, improved stability when cornering, and also fast and responsive steering performance.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - Impreza WRX STI A-Line - GVF Applied C (2010-2012) EJ255\u003cbr\u003eSubaru - Impreza WRX STI A-Line - GVF Applied D (2012-2013) EJ255\u003cbr\u003eSubaru - Impreza WRX STI A-Line - GVF Applied E (2013-2014) EJ255\u003c!--split--\u003e"}

{"id":6271347130550,"title":"STI - Flexible Draw Stiffener Front - Subaru Impreza WRX STI GRB Applied A-E (2007-2014)","handle":"sti-flexible-draw-stiffener-front-subaru-impreza-wrx-sti-grb-applied-a-e-2007-2014-st20118zr000","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: STI\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003eIncluded: 2 pieces (Left and Right)\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- This product cannot be installed in combination with the Flexible Lower Arm Bar (Part Number: ST20512ZR010).\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- Not compatible with STI TS Type RA, STI 20th Anniversary and R205 vehicles.This STI original sports performance part applies moderate tension between the vehicle body and cross member to prevent the chassis from bending when you drive the vehicle. This results in agile and responsive initial steering, as well as a comfortable ride. The vehicle will boast better grip on all four wheels, improved stability when cornering, and also fast and responsive steering performance.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - Impreza WRX STI - GRB Applied A (2007-2009) EJ207\u003cbr\u003eSubaru - Impreza WRX STI - GRB Applied B (2009-2009) EJ207\u003cbr\u003eSubaru - Impreza WRX STI - GRB Applied C (2010-2012) EJ207\u003cbr\u003eSubaru - Impreza WRX STI - GRB Applied D (2012-2013) EJ207\u003cbr\u003eSubaru - Impreza WRX STI - GRB Applied E (2013-2014) EJ207\u003c!--split--\u003e","published_at":"2021-02-18T16:52:11+08:00","created_at":"2021-02-18T16:52:12+08:00","vendor":"STI","type":"Bars and Braces","tags":["2-points","2007","2008","2009","2010","2011","2012","2013","2014","bars-and-braces","braces","front","impreza-wrx-sti-grb-applied-a-2007-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-b-2009-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-c-2010-2012-tc-ej207-h4","impreza-wrx-sti-grb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-grb-applied-e-2013-2014-tc-ej207-h4","sti","subaru","ws15"],"price":46717,"price_min":46717,"price_max":46717,"available":true,"price_varies":false,"compare_at_price":46800,"compare_at_price_min":46800,"compare_at_price_max":46800,"compare_at_price_varies":false,"variants":[{"id":38055831109814,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ST20118ZR000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"STI - Flexible Draw Stiffener Front - Subaru Impreza WRX STI GRB Applied A-E (2007-2014)","public_title":null,"options":["Default Title"],"price":46717,"weight":8000,"compare_at_price":46800,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-draw-stiffener-front-subaru-impreza-wrx-sti-grb-applied-a-e-2007-2014-rzcrew.png?v=1710326752"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-draw-stiffener-front-subaru-impreza-wrx-sti-grb-applied-a-e-2007-2014-rzcrew.png?v=1710326752","options":["Title"],"media":[{"alt":"STI - Flexible Draw Stiffener Front - Subaru Impreza WRX STI GRB Applied A-E (2007-2014) - ST20118ZR000 - Rzcrewgarage","id":25433863618742,"position":1,"preview_image":{"aspect_ratio":1.538,"height":426,"width":655,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-draw-stiffener-front-subaru-impreza-wrx-sti-grb-applied-a-e-2007-2014-rzcrew.png?v=1710326752"},"aspect_ratio":1.538,"height":426,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-draw-stiffener-front-subaru-impreza-wrx-sti-grb-applied-a-e-2007-2014-rzcrew.png?v=1710326752","width":655}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: STI\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003eIncluded: 2 pieces (Left and Right)\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- This product cannot be installed in combination with the Flexible Lower Arm Bar (Part Number: ST20512ZR010).\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- Not compatible with STI TS Type RA, STI 20th Anniversary and R205 vehicles.This STI original sports performance part applies moderate tension between the vehicle body and cross member to prevent the chassis from bending when you drive the vehicle. This results in agile and responsive initial steering, as well as a comfortable ride. The vehicle will boast better grip on all four wheels, improved stability when cornering, and also fast and responsive steering performance.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - Impreza WRX STI - GRB Applied A (2007-2009) EJ207\u003cbr\u003eSubaru - Impreza WRX STI - GRB Applied B (2009-2009) EJ207\u003cbr\u003eSubaru - Impreza WRX STI - GRB Applied C (2010-2012) EJ207\u003cbr\u003eSubaru - Impreza WRX STI - GRB Applied D (2012-2013) EJ207\u003cbr\u003eSubaru - Impreza WRX STI - GRB Applied E (2013-2014) EJ207\u003c!--split--\u003e"}

{"id":6271347163318,"title":"STI - Flexible Draw Stiffener Front - Subaru Impreza WRX STI GVB Applied C-E (2007-2014)","handle":"sti-flexible-draw-stiffener-front-subaru-impreza-wrx-sti-gvb-applied-c-e-2007-2014-st20118zr000","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: STI\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003eIncluded: 2 pieces (Left and Right)\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- This product cannot be installed in combination with the Flexible Lower Arm Bar (Part Number: ST20512ZR010).\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- Not compatible with STI TS Type RA, STI 20th Anniversary and R205 vehicles.This STI original sports performance part applies moderate tension between the vehicle body and cross member to prevent the chassis from bending when you drive the vehicle. This results in agile and responsive initial steering, as well as a comfortable ride. The vehicle will boast better grip on all four wheels, improved stability when cornering, and also fast and responsive steering performance.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - Impreza WRX STI - GVB Applied C (2007-2012) EJ207\u003cbr\u003eSubaru - Impreza WRX STI - GVB Applied D (2012-2013) EJ207\u003cbr\u003eSubaru - Impreza WRX STI - GVB Applied E (2013-2014) EJ207\u003c!--split--\u003e","published_at":"2021-02-18T16:52:12+08:00","created_at":"2021-02-18T16:52:13+08:00","vendor":"STI","type":"Bars and Braces","tags":["2-points","2007","2008","2009","2010","2011","2012","2013","2014","bars-and-braces","braces","front","impreza-wrx-sti-gvb-applied-c-2007-2012-tc-ej207-h4","impreza-wrx-sti-gvb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-gvb-applied-e-2013-2014-tc-ej207-h4","sti","subaru","ws15"],"price":46717,"price_min":46717,"price_max":46717,"available":true,"price_varies":false,"compare_at_price":46800,"compare_at_price_min":46800,"compare_at_price_max":46800,"compare_at_price_varies":false,"variants":[{"id":38055831175350,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ST20118ZR000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"STI - Flexible Draw Stiffener Front - Subaru Impreza WRX STI GVB Applied C-E (2007-2014)","public_title":null,"options":["Default Title"],"price":46717,"weight":8000,"compare_at_price":46800,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-draw-stiffener-front-subaru-impreza-wrx-sti-gvb-applied-c-e-2007-2014-rzcrew.png?v=1710326752"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-draw-stiffener-front-subaru-impreza-wrx-sti-gvb-applied-c-e-2007-2014-rzcrew.png?v=1710326752","options":["Title"],"media":[{"alt":"STI - Flexible Draw Stiffener Front - Subaru Impreza WRX STI GVB Applied C-E (2007-2014) - ST20118ZR000 - Rzcrewgarage","id":25433863651510,"position":1,"preview_image":{"aspect_ratio":1.538,"height":426,"width":655,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-draw-stiffener-front-subaru-impreza-wrx-sti-gvb-applied-c-e-2007-2014-rzcrew.png?v=1710326752"},"aspect_ratio":1.538,"height":426,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-draw-stiffener-front-subaru-impreza-wrx-sti-gvb-applied-c-e-2007-2014-rzcrew.png?v=1710326752","width":655}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: STI\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003eIncluded: 2 pieces (Left and Right)\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- This product cannot be installed in combination with the Flexible Lower Arm Bar (Part Number: ST20512ZR010).\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- Not compatible with STI TS Type RA, STI 20th Anniversary and R205 vehicles.This STI original sports performance part applies moderate tension between the vehicle body and cross member to prevent the chassis from bending when you drive the vehicle. This results in agile and responsive initial steering, as well as a comfortable ride. The vehicle will boast better grip on all four wheels, improved stability when cornering, and also fast and responsive steering performance.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - Impreza WRX STI - GVB Applied C (2007-2012) EJ207\u003cbr\u003eSubaru - Impreza WRX STI - GVB Applied D (2012-2013) EJ207\u003cbr\u003eSubaru - Impreza WRX STI - GVB Applied E (2013-2014) EJ207\u003c!--split--\u003e"}

{"id":6271344902326,"title":"STI - Flexible Draw Stiffener Front - Subaru Legacy B4 BM9 (2009-2014)","handle":"sti-flexible-draw-stiffener-front-subaru-legacy-b4-bm9-2009-2014-st20118ez000","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: STI\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- This product comes as standard on Legacy 2.5GT tS vehicles.\u003cbr\u003e- Must be installed on the Right side.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- Only for Turbo vehicles.This STI original sports performance part applies moderate tension between the vehicle body and cross member to prevent the chassis from bending when you drive the vehicle. This results in agile and responsive initial steering, as well as a comfortable ride. The vehicle will boast better grip on all four wheels, improved stability when cornering, and also fast and responsive steering performance.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - Legacy B4 - BM9 (2009-2014) EJ25\u003c!--split--\u003e","published_at":"2021-02-18T16:51:14+08:00","created_at":"2021-02-18T16:51:15+08:00","vendor":"STI","type":"Bars and Braces","tags":["2-points","2009","2010","2011","2012","2013","2014","bars-and-braces","braces","front","legacy-b4-bm9-ej25-na-2009-2014-na-ej25-h4","sti","subaru","ws15"],"price":27252,"price_min":27252,"price_max":27252,"available":true,"price_varies":false,"compare_at_price":27300,"compare_at_price_min":27300,"compare_at_price_max":27300,"compare_at_price_varies":false,"variants":[{"id":38055827439798,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ST20118EZ000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"STI - Flexible Draw Stiffener Front - Subaru Legacy B4 BM9 (2009-2014)","public_title":null,"options":["Default Title"],"price":27252,"weight":8000,"compare_at_price":27300,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/ST20118EZ000.png?v=1710216454"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/ST20118EZ000.png?v=1710216454","options":["Title"],"media":[{"alt":"STI - Flexible Draw Stiffener Front - Subaru Legacy B4 BM9 (2009-2014) - ST20118EZ000 - Rzcrewgarage","id":25433858932918,"position":1,"preview_image":{"aspect_ratio":1.118,"height":424,"width":474,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/ST20118EZ000.png?v=1710216454"},"aspect_ratio":1.118,"height":424,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/ST20118EZ000.png?v=1710216454","width":474}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: STI\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- This product comes as standard on Legacy 2.5GT tS vehicles.\u003cbr\u003e- Must be installed on the Right side.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- Only for Turbo vehicles.This STI original sports performance part applies moderate tension between the vehicle body and cross member to prevent the chassis from bending when you drive the vehicle. This results in agile and responsive initial steering, as well as a comfortable ride. The vehicle will boast better grip on all four wheels, improved stability when cornering, and also fast and responsive steering performance.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - Legacy B4 - BM9 (2009-2014) EJ25\u003c!--split--\u003e"}

{"id":6271345230006,"title":"STI - Flexible Draw Stiffener Front - Subaru Legacy B4 BM9 (2009-2014)","handle":"sti-flexible-draw-stiffener-front-subaru-legacy-b4-bm9-2009-2014-st20118ez010","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: STI\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- This product comes as standard on Legacy 2.5GT tS vehicles.\u003cbr\u003e- Must be installed on the Left side.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- Only for NA vehicles.This STI original sports performance part applies moderate tension between the vehicle body and cross member to prevent the chassis from bending when you drive the vehicle. This results in agile and responsive initial steering, as well as a comfortable ride. The vehicle will boast better grip on all four wheels, improved stability when cornering, and also fast and responsive steering performance.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - Legacy B4 - BM9 (2009-2014) EJ25 Turbo\u003c!--split--\u003e","published_at":"2021-02-18T16:51:25+08:00","created_at":"2021-02-18T16:51:27+08:00","vendor":"STI","type":"Bars and Braces","tags":["2-points","2009","2010","2011","2012","2013","2014","bars-and-braces","braces","front","legacy-b4-bm9-ej25-turbo-2009-2014-na-ej25-h4","sti","subaru","ws15"],"price":27252,"price_min":27252,"price_max":27252,"available":true,"price_varies":false,"compare_at_price":27300,"compare_at_price_min":27300,"compare_at_price_max":27300,"compare_at_price_varies":false,"variants":[{"id":38055828029622,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ST20118EZ010","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"STI - Flexible Draw Stiffener Front - Subaru Legacy B4 BM9 (2009-2014)","public_title":null,"options":["Default Title"],"price":27252,"weight":8000,"compare_at_price":27300,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-draw-stiffener-front-subaru-legacy-b4-bm9-2009-2014-rzcrew.png?v=1710326770"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-draw-stiffener-front-subaru-legacy-b4-bm9-2009-2014-rzcrew.png?v=1710326770","options":["Title"],"media":[{"alt":"STI - Flexible Draw Stiffener Front - Subaru Legacy B4 BM9 (2009-2014) - ST20118EZ010 - Rzcrewgarage","id":25433859621046,"position":1,"preview_image":{"aspect_ratio":1.118,"height":424,"width":474,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-draw-stiffener-front-subaru-legacy-b4-bm9-2009-2014-rzcrew.png?v=1710326770"},"aspect_ratio":1.118,"height":424,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-draw-stiffener-front-subaru-legacy-b4-bm9-2009-2014-rzcrew.png?v=1710326770","width":474}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: STI\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- This product comes as standard on Legacy 2.5GT tS vehicles.\u003cbr\u003e- Must be installed on the Left side.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- Only for NA vehicles.This STI original sports performance part applies moderate tension between the vehicle body and cross member to prevent the chassis from bending when you drive the vehicle. This results in agile and responsive initial steering, as well as a comfortable ride. The vehicle will boast better grip on all four wheels, improved stability when cornering, and also fast and responsive steering performance.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - Legacy B4 - BM9 (2009-2014) EJ25 Turbo\u003c!--split--\u003e"}

{"id":6271345033398,"title":"STI - Flexible Draw Stiffener Front - Subaru Legacy Touring Wagon BR9 (2009-2014)","handle":"sti-flexible-draw-stiffener-front-subaru-legacy-touring-wagon-br9-2009-2014-st20118ez000","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: STI\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- This product comes as standard on Legacy 2.5GT tS vehicles.\u003cbr\u003e- Must be installed on the Right side.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- Only for Turbo vehicles.This STI original sports performance part applies moderate tension between the vehicle body and cross member to prevent the chassis from bending when you drive the vehicle. This results in agile and responsive initial steering, as well as a comfortable ride. The vehicle will boast better grip on all four wheels, improved stability when cornering, and also fast and responsive steering performance.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - Legacy Touring Wagon - BR9 (2009-2014) EJ255\u003c!--split--\u003e","published_at":"2021-02-18T16:51:18+08:00","created_at":"2021-02-18T16:51:19+08:00","vendor":"STI","type":"Bars and Braces","tags":["2-points","2009","2010","2011","2012","2013","2014","bars-and-braces","braces","front","legacy-touring-wagon-br9-2009-2014-tc-ej255-h4","sti","subaru","ws15"],"price":27252,"price_min":27252,"price_max":27252,"available":true,"price_varies":false,"compare_at_price":27300,"compare_at_price_min":27300,"compare_at_price_max":27300,"compare_at_price_varies":false,"variants":[{"id":38055827701942,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ST20118EZ000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"STI - Flexible Draw Stiffener Front - Subaru Legacy Touring Wagon BR9 (2009-2014)","public_title":null,"options":["Default Title"],"price":27252,"weight":8000,"compare_at_price":27300,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/ST20118EZ000_1f6b03d9-5cc3-4453-8385-d265154d7abb.png?v=1710216456"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/ST20118EZ000_1f6b03d9-5cc3-4453-8385-d265154d7abb.png?v=1710216456","options":["Title"],"media":[{"alt":"STI - Flexible Draw Stiffener Front - Subaru Legacy Touring Wagon BR9 (2009-2014) - ST20118EZ000 - Rzcrewgarage","id":25433859522742,"position":1,"preview_image":{"aspect_ratio":1.118,"height":424,"width":474,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/ST20118EZ000_1f6b03d9-5cc3-4453-8385-d265154d7abb.png?v=1710216456"},"aspect_ratio":1.118,"height":424,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/ST20118EZ000_1f6b03d9-5cc3-4453-8385-d265154d7abb.png?v=1710216456","width":474}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: STI\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- This product comes as standard on Legacy 2.5GT tS vehicles.\u003cbr\u003e- Must be installed on the Right side.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- Only for Turbo vehicles.This STI original sports performance part applies moderate tension between the vehicle body and cross member to prevent the chassis from bending when you drive the vehicle. This results in agile and responsive initial steering, as well as a comfortable ride. The vehicle will boast better grip on all four wheels, improved stability when cornering, and also fast and responsive steering performance.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - Legacy Touring Wagon - BR9 (2009-2014) EJ255\u003c!--split--\u003e"}

{"id":6271345393846,"title":"STI - Flexible Draw Stiffener Front - Subaru Legacy Touring Wagon BR9 (2009-2014)","handle":"sti-flexible-draw-stiffener-front-subaru-legacy-touring-wagon-br9-2009-2014-st20118ez010","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: STI\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- This product comes as standard on Legacy 2.5GT tS vehicles.\u003cbr\u003e- Must be installed on the Left side.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- Only for NA vehicles.This STI original sports performance part applies moderate tension between the vehicle body and cross member to prevent the chassis from bending when you drive the vehicle. This results in agile and responsive initial steering, as well as a comfortable ride. The vehicle will boast better grip on all four wheels, improved stability when cornering, and also fast and responsive steering performance.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - Legacy Touring Wagon - BR9 (2009-2014) EJ25\u003c!--split--\u003e","published_at":"2021-02-18T16:51:30+08:00","created_at":"2021-02-18T16:51:31+08:00","vendor":"STI","type":"Bars and Braces","tags":["2-points","2009","2010","2011","2012","2013","2014","bars-and-braces","braces","front","legacy-touring-wagon-br9-2009-2014-na-ej25-h4","sti","subaru","ws15"],"price":27252,"price_min":27252,"price_max":27252,"available":true,"price_varies":false,"compare_at_price":27300,"compare_at_price_min":27300,"compare_at_price_max":27300,"compare_at_price_varies":false,"variants":[{"id":38055828226230,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ST20118EZ010","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"STI - Flexible Draw Stiffener Front - Subaru Legacy Touring Wagon BR9 (2009-2014)","public_title":null,"options":["Default Title"],"price":27252,"weight":8000,"compare_at_price":27300,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-draw-stiffener-front-subaru-legacy-touring-wagon-br9-2009-2014-rzcrew.png?v=1710326769"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-draw-stiffener-front-subaru-legacy-touring-wagon-br9-2009-2014-rzcrew.png?v=1710326769","options":["Title"],"media":[{"alt":"STI - Flexible Draw Stiffener Front - Subaru Legacy Touring Wagon BR9 (2009-2014) - ST20118EZ010 - Rzcrewgarage","id":25433859883190,"position":1,"preview_image":{"aspect_ratio":1.118,"height":424,"width":474,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-draw-stiffener-front-subaru-legacy-touring-wagon-br9-2009-2014-rzcrew.png?v=1710326769"},"aspect_ratio":1.118,"height":424,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-draw-stiffener-front-subaru-legacy-touring-wagon-br9-2009-2014-rzcrew.png?v=1710326769","width":474}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: STI\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- This product comes as standard on Legacy 2.5GT tS vehicles.\u003cbr\u003e- Must be installed on the Left side.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- Only for NA vehicles.This STI original sports performance part applies moderate tension between the vehicle body and cross member to prevent the chassis from bending when you drive the vehicle. This results in agile and responsive initial steering, as well as a comfortable ride. The vehicle will boast better grip on all four wheels, improved stability when cornering, and also fast and responsive steering performance.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - Legacy Touring Wagon - BR9 (2009-2014) EJ25\u003c!--split--\u003e"}