Handling and Suspension

{"id":1954639315041,"title":"Blitz - BB DSC Coilover Kit - Lexus GS430 UZS190(ALL)","handle":"blitz-bb-dsc-coilovers-lexus-gs430-uzs190-93205","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Blitz\u003cbr\u003ePart Number: 93205\u003cbr\u003eType: BB DSC\u003cbr\u003eRef: 93205\u003cbr\u003eFront Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 18kg\u003cbr\u003eHeight Adjustment Range: -100mm ~ -10mm\u003cbr\u003eTop Mount: Fixed Type Pillowball\u003cbr\u003e\u003cbr\u003eRear Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 16kg\u003cbr\u003eHeight Adjustment Range: -120mm ~ -10mm\u003cbr\u003eTop Mount: Fixed Type Pillowball\u003cbr\u003e \u003cbr\u003ePlease note that the DSC system has now been replaced by the DSC Plus system. The new following part number apply: 93205---\u0026gt;98205The ZZ-R BB DSC coilover series are standard ZZ-R BB coilovers enhanced with a motorized system to adjust the dampening rates from inside the passenger cabin.\u003cbr\u003e\nThey are full length adjustable, featuring up to 96-steps dampening force adjustment managed by the motorized system.\u003cbr\u003e\nThe precision of dampening can be adjusted from the car controller between 32\/64\/96 steps\u003cbr\u003e\nThe dampening of the coilovers can be controlled left\/right, or each coilover individually, and up to 5 settings can be stored in the controller.\u003cbr\u003e\nThe controller has a \"Highway Mode\" which auto adjusts the dampening according to the speed.\u003cbr\u003e\nThe Blitz ZZ-R BB DSC damper was developped to match the behaviour of the original suspensions while lowering the height of the car.\u003cbr\u003e\nUsing the ZZ-R damper as a base, the BB series focusses on achieving the best handling for lowered cars in any conditions. These coilovers are tuned specifically to provide reliable handling and stability at high speeds and come with short type bump stops to prevent the suspensions from bottoming out.\u003cbr\u003e\nWith camber adjustable pillowball upper mount at the front, the ZZ-R BB allow for both handling and style settings.\u003cbr\u003e\nBeing based on the ZZ-R series, the BB are full-length adjustable monotube coilovers featuring a 32-step dampening force adjustment.\u003cbr\u003e\nThey adopt a 44mm diameter piston to supress lag in dampening and offer a smooth and reliable ride.\u003cbr\u003eThe ZZ-R BB DSC are rebuildable coilovers.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eGS430 | UZS190 Kouki | 2006-2007 | NA | 3UZ-FE | V8\u003cbr\u003eGS430 | UZS190 Zenki | 2005-2006 | NA | 3UZ-FE | V8\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2019-02-08T15:04:39+08:00","created_at":"2019-02-08T15:04:41+08:00","vendor":"Blitz","type":"Coilovers and Springs","tags":["2005","2006","2007","blitz","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","gs430-uzs190-kouki-2006-2007-na-3uz-fe-v8","gs430-uzs190-zenki-2005-2006-na-3uz-fe-v8","jp1","lexus","ws138"],"price":179360,"price_min":179360,"price_max":179360,"available":true,"price_varies":false,"compare_at_price":277200,"compare_at_price_min":277200,"compare_at_price_max":277200,"compare_at_price_varies":false,"variants":[{"id":18519771414625,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"93205","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Blitz - BB DSC Coilover Kit - Lexus GS430 UZS190(ALL)","public_title":null,"options":["Default Title"],"price":179360,"weight":27500,"compare_at_price":277200,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/BBDSC_95c467e4-080a-4919-9534-e115521ddaac.jpg?v=1710170700"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/BBDSC_95c467e4-080a-4919-9534-e115521ddaac.jpg?v=1710170700","options":["Title"],"media":[{"alt":"Blitz - BB DSC Coilovers - Lexus GS430 UZS190 - 93205 - Rzcrewgarage","id":25373363142838,"position":1,"preview_image":{"aspect_ratio":1.673,"height":849,"width":1420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/BBDSC_95c467e4-080a-4919-9534-e115521ddaac.jpg?v=1710170700"},"aspect_ratio":1.673,"height":849,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/BBDSC_95c467e4-080a-4919-9534-e115521ddaac.jpg?v=1710170700","width":1420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Blitz\u003cbr\u003ePart Number: 93205\u003cbr\u003eType: BB DSC\u003cbr\u003eRef: 93205\u003cbr\u003eFront Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 18kg\u003cbr\u003eHeight Adjustment Range: -100mm ~ -10mm\u003cbr\u003eTop Mount: Fixed Type Pillowball\u003cbr\u003e\u003cbr\u003eRear Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 16kg\u003cbr\u003eHeight Adjustment Range: -120mm ~ -10mm\u003cbr\u003eTop Mount: Fixed Type Pillowball\u003cbr\u003e \u003cbr\u003ePlease note that the DSC system has now been replaced by the DSC Plus system. The new following part number apply: 93205---\u0026gt;98205The ZZ-R BB DSC coilover series are standard ZZ-R BB coilovers enhanced with a motorized system to adjust the dampening rates from inside the passenger cabin.\u003cbr\u003e\nThey are full length adjustable, featuring up to 96-steps dampening force adjustment managed by the motorized system.\u003cbr\u003e\nThe precision of dampening can be adjusted from the car controller between 32\/64\/96 steps\u003cbr\u003e\nThe dampening of the coilovers can be controlled left\/right, or each coilover individually, and up to 5 settings can be stored in the controller.\u003cbr\u003e\nThe controller has a \"Highway Mode\" which auto adjusts the dampening according to the speed.\u003cbr\u003e\nThe Blitz ZZ-R BB DSC damper was developped to match the behaviour of the original suspensions while lowering the height of the car.\u003cbr\u003e\nUsing the ZZ-R damper as a base, the BB series focusses on achieving the best handling for lowered cars in any conditions. These coilovers are tuned specifically to provide reliable handling and stability at high speeds and come with short type bump stops to prevent the suspensions from bottoming out.\u003cbr\u003e\nWith camber adjustable pillowball upper mount at the front, the ZZ-R BB allow for both handling and style settings.\u003cbr\u003e\nBeing based on the ZZ-R series, the BB are full-length adjustable monotube coilovers featuring a 32-step dampening force adjustment.\u003cbr\u003e\nThey adopt a 44mm diameter piston to supress lag in dampening and offer a smooth and reliable ride.\u003cbr\u003eThe ZZ-R BB DSC are rebuildable coilovers.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eGS430 | UZS190 Kouki | 2006-2007 | NA | 3UZ-FE | V8\u003cbr\u003eGS430 | UZS190 Zenki | 2005-2006 | NA | 3UZ-FE | V8\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":1954639282273,"title":"Blitz - BB Coilover Kit - Lexus GS430 UZS190(ALL)","handle":"blitz-bb-coilovers-lexus-gs430-uzs190-92205","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Blitz\u003cbr\u003ePart Number: 92205\u003cbr\u003eType: BB\u003cbr\u003eRef: 92205\u003cbr\u003eFront Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 18kg\u003cbr\u003eHeight Adjustment Range: -100mm ~ -10mm\u003cbr\u003eTop Mount: Fixed Type Pillowball\u003cbr\u003e\u003cbr\u003eRear Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 16kg\u003cbr\u003eHeight Adjustment Range: -120mm ~ -10mm\u003cbr\u003eTop Mount: Fixed Type Pillowball\u003cbr\u003e \u003cbr\u003eThe Blitz ZZ-R BB coilover was developped to match the behaviour of the original suspensions while lowering the height of the car.\u003cbr\u003e\nUsing the ZZ-R damper as a base, the BB series focusses on achieving the best handling for lowered cars in any conditions. These coilovers are tuned specifically to provide reliable handling and stability at high speeds and come with short type bump stops to prevent the suspensions from bottoming out.\u003cbr\u003e\nWith camber adjustable pillowball upper mount at the front, the ZZ-R BB allow for both handling and style settings.\u003cbr\u003e\nBeing based on the ZZ-R series, the BB are full-length adjustable monotube coilovers featuring a 32-step dampening force adjustment.\u003cbr\u003e\nThey adopt a 44mm diameter piston to supress lag in dampening and offer a smooth and reliable ride.\u003cbr\u003eThe ZZ-R BB are rebuildable coilovers.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eGS430 | UZS190 Kouki | 2006-2007 | NA | 3UZ-FE | V8\u003cbr\u003eGS430 | UZS190 Zenki | 2005-2006 | NA | 3UZ-FE | V8\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2019-02-08T15:04:37+08:00","created_at":"2019-02-08T15:04:39+08:00","vendor":"Blitz","type":"Coilovers and Springs","tags":["2005","2006","2007","blitz","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","gs430-uzs190-kouki-2006-2007-na-3uz-fe-v8","gs430-uzs190-zenki-2005-2006-na-3uz-fe-v8","jp1","lexus","ws138"],"price":134520,"price_min":134520,"price_max":134520,"available":true,"price_varies":false,"compare_at_price":207900,"compare_at_price_min":207900,"compare_at_price_max":207900,"compare_at_price_varies":false,"variants":[{"id":18519771381857,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"92205","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Blitz - BB Coilover Kit - Lexus GS430 UZS190(ALL)","public_title":null,"options":["Default Title"],"price":134520,"weight":25000,"compare_at_price":207900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/BB_26298a0c-1a50-4d81-a319-445e6c988d62.jpg?v=1710170701"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/BB_26298a0c-1a50-4d81-a319-445e6c988d62.jpg?v=1710170701","options":["Title"],"media":[{"alt":"Blitz - BB Coilovers - Lexus GS430 UZS190 - 92205 - Rzcrewgarage","id":25373362847926,"position":1,"preview_image":{"aspect_ratio":1.673,"height":849,"width":1420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/BB_26298a0c-1a50-4d81-a319-445e6c988d62.jpg?v=1710170701"},"aspect_ratio":1.673,"height":849,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/BB_26298a0c-1a50-4d81-a319-445e6c988d62.jpg?v=1710170701","width":1420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Blitz\u003cbr\u003ePart Number: 92205\u003cbr\u003eType: BB\u003cbr\u003eRef: 92205\u003cbr\u003eFront Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 18kg\u003cbr\u003eHeight Adjustment Range: -100mm ~ -10mm\u003cbr\u003eTop Mount: Fixed Type Pillowball\u003cbr\u003e\u003cbr\u003eRear Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 16kg\u003cbr\u003eHeight Adjustment Range: -120mm ~ -10mm\u003cbr\u003eTop Mount: Fixed Type Pillowball\u003cbr\u003e \u003cbr\u003eThe Blitz ZZ-R BB coilover was developped to match the behaviour of the original suspensions while lowering the height of the car.\u003cbr\u003e\nUsing the ZZ-R damper as a base, the BB series focusses on achieving the best handling for lowered cars in any conditions. These coilovers are tuned specifically to provide reliable handling and stability at high speeds and come with short type bump stops to prevent the suspensions from bottoming out.\u003cbr\u003e\nWith camber adjustable pillowball upper mount at the front, the ZZ-R BB allow for both handling and style settings.\u003cbr\u003e\nBeing based on the ZZ-R series, the BB are full-length adjustable monotube coilovers featuring a 32-step dampening force adjustment.\u003cbr\u003e\nThey adopt a 44mm diameter piston to supress lag in dampening and offer a smooth and reliable ride.\u003cbr\u003eThe ZZ-R BB are rebuildable coilovers.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eGS430 | UZS190 Kouki | 2006-2007 | NA | 3UZ-FE | V8\u003cbr\u003eGS430 | UZS190 Zenki | 2005-2006 | NA | 3UZ-FE | V8\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":1954639216737,"title":"Blitz - ZZ-R Coilover Kit - Lexus GS430 UZS190(ALL)","handle":"blitz-zz-r-coilovers-lexus-gs430-uzs190-92431","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Blitz\u003cbr\u003ePart Number: 92431\u003cbr\u003eType: ZZ-R\u003cbr\u003eRef: 92431\u003cbr\u003eFront Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 9kg\u003cbr\u003eHeight Adjustment Range: -85mm ~ +5mm\u003cbr\u003eTop Mount: Reinforced Rubber Mount\u003cbr\u003e\u003cbr\u003eRear Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 8kg\u003cbr\u003eHeight Adjustment Range: -70mm ~ +20mm\u003cbr\u003eTop Mount: Reinforced Rubber Mount\u003cbr\u003e \u003cbr\u003eThe Blitz ZZ-R coilovers are full-length adjustable monotube coilovers featuring a 32-step dampening force adjustment.\u003cbr\u003e\nThey are developped to be street and track friendly and use aluminum upper mounts, lock seats and brackets for rigidity and weight savings.\u003cbr\u003e\nThey adopt a 44mm diameter piston to supress lag in dampening and offer a smooth and reliable ride.\u003cbr\u003eThe ZZ-R are rebuildable coilovers.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eGS430 | UZS190 Kouki | 2006-2007 | NA | 3UZ-FE | V8\u003cbr\u003eGS430 | UZS190 Zenki | 2005-2006 | NA | 3UZ-FE | V8\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2019-02-08T15:04:32+08:00","created_at":"2019-02-08T15:04:34+08:00","vendor":"Blitz","type":"Coilovers and Springs","tags":["2005","2006","2007","blitz","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","gs430-uzs190-kouki-2006-2007-na-3uz-fe-v8","gs430-uzs190-zenki-2005-2006-na-3uz-fe-v8","jp1","lexus","ws138"],"price":108900,"price_min":108900,"price_max":108900,"available":true,"price_varies":false,"compare_at_price":168300,"compare_at_price_min":168300,"compare_at_price_max":168300,"compare_at_price_varies":false,"variants":[{"id":18519771316321,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"92431","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Blitz - ZZ-R Coilover Kit - Lexus GS430 UZS190(ALL)","public_title":null,"options":["Default Title"],"price":108900,"weight":30000,"compare_at_price":168300,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Blitz_ZZ-R_fff8a3c0-5d93-47e6-9942-91377506040b.jpg?v=1710170696"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Blitz_ZZ-R_fff8a3c0-5d93-47e6-9942-91377506040b.jpg?v=1710170696","options":["Title"],"media":[{"alt":"Blitz - ZZ-R Coilovers - Lexus GS430 UZS190 - 92431 - Rzcrewgarage","id":25373362159798,"position":1,"preview_image":{"aspect_ratio":1.673,"height":837,"width":1400,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Blitz_ZZ-R_fff8a3c0-5d93-47e6-9942-91377506040b.jpg?v=1710170696"},"aspect_ratio":1.673,"height":837,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Blitz_ZZ-R_fff8a3c0-5d93-47e6-9942-91377506040b.jpg?v=1710170696","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Blitz\u003cbr\u003ePart Number: 92431\u003cbr\u003eType: ZZ-R\u003cbr\u003eRef: 92431\u003cbr\u003eFront Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 9kg\u003cbr\u003eHeight Adjustment Range: -85mm ~ +5mm\u003cbr\u003eTop Mount: Reinforced Rubber Mount\u003cbr\u003e\u003cbr\u003eRear Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 8kg\u003cbr\u003eHeight Adjustment Range: -70mm ~ +20mm\u003cbr\u003eTop Mount: Reinforced Rubber Mount\u003cbr\u003e \u003cbr\u003eThe Blitz ZZ-R coilovers are full-length adjustable monotube coilovers featuring a 32-step dampening force adjustment.\u003cbr\u003e\nThey are developped to be street and track friendly and use aluminum upper mounts, lock seats and brackets for rigidity and weight savings.\u003cbr\u003e\nThey adopt a 44mm diameter piston to supress lag in dampening and offer a smooth and reliable ride.\u003cbr\u003eThe ZZ-R are rebuildable coilovers.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eGS430 | UZS190 Kouki | 2006-2007 | NA | 3UZ-FE | V8\u003cbr\u003eGS430 | UZS190 Zenki | 2005-2006 | NA | 3UZ-FE | V8\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":1954027274337,"title":"Apexi - N1 EVO Coilover Kit - Mitsubishi Lancer Evolution X CZ4A","handle":"apexi-n1-evo-coilover-kit-mitsubishi-lancer-evolution-x-cz4a-264cm023","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Apexi\u003cbr\u003ePart Number: 264CM023\u003cbr\u003eMounts:Front Adjustable Camber Pillowball Upper Mount\u003cbr\u003eSpring Rates:\u003cbr\u003eFront:10kg\u003cbr\u003eRear: 7kg\u003cbr\u003e\u003cbr\u003eThe Apexi N1 Evo Damper Kit features a Monotube design with a 46mm Diameter strut Build for high spec street and track uses. \u003cbr\u003e\u003cbr\u003eUnlike traditional coilover kits that lower your car for general street driving, the Apexi N1 Evo Damper kit provides a lower ride and enhanced control thanks to higher spring rates and a redefined front \/ rear balance.\u003cbr\u003eThe full length adjustment allows a lowered setting without sacrificing sacrificing bump stroke travel.\u003cbr\u003eThe inverted monotube design features a large diameter for strength and predicability.GT race quality damper fluid that can withstand high temperatures and prevent damping force degradation\u003cbr\u003e\nThe Apexi N1 Evo offers a 25-step dampening adjustability for precise suspension tuning.\u003cbr\u003eThis suspension kit can be overhauled.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eLancer Evolution X | CZ4A Zenki (GSR Jdm\/MR) | 2007-2008 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Chuki (GSR Jdm\/MR) | 2008-2009 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Kouki (GSR Jdm\/MR) | 2009-2017 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Zenki (RS Jdm\/GSR) | 2007-2008 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Chuki (RS Jdm\/GSR) | 2008-2009 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Kouki (RS Jdm\/GSR) | 2009-2017 | TC | 4B11 | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2019-02-07T15:40:54+08:00","created_at":"2019-02-07T15:40:55+08:00","vendor":"Apexi","type":"Coilovers and Springs","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","8","apexi","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","jp1","lancer-evolution-x-cz4a-chuki-gsr-jdmmr-2008-2009-tc-4b11-i4","lancer-evolution-x-cz4a-chuki-rs-jdmgsr-2008-2009-tc-4b11-i4","lancer-evolution-x-cz4a-kouki-gsr-jdmmr-2009-2017-tc-4b11-i4","lancer-evolution-x-cz4a-kouki-rs-jdmgsr-2009-2017-tc-4b11-i4","lancer-evolution-x-cz4a-zenki-gsr-jdmmr-2007-2008-tc-4b11-i4","lancer-evolution-x-cz4a-zenki-rs-jdmgsr-2007-2008-tc-4b11-i4","mitsubishi","ws123"],"price":313070,"price_min":313070,"price_max":313070,"available":true,"price_varies":false,"compare_at_price":380200,"compare_at_price_min":380200,"compare_at_price_max":380200,"compare_at_price_varies":false,"variants":[{"id":18516343160929,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"264CM023","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Apexi - N1 EVO Coilover Kit - Mitsubishi Lancer Evolution X CZ4A","public_title":null,"options":["Default Title"],"price":313070,"weight":45000,"compare_at_price":380200,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Apexi_N1_Coilover_b4c39442-ffcd-45b1-8048-95d2a2b84659.jpg?v=1710170552"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Apexi_N1_Coilover_b4c39442-ffcd-45b1-8048-95d2a2b84659.jpg?v=1710170552","options":["Title"],"media":[{"alt":"Apexi - N1 EVO Coilover Kit - Mitsubishi Lancer Evolution X CZ4A - 264CM023 - Rzcrewgarage","id":25376451133622,"position":1,"preview_image":{"aspect_ratio":1.25,"height":640,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Apexi_N1_Coilover_b4c39442-ffcd-45b1-8048-95d2a2b84659.jpg?v=1710170552"},"aspect_ratio":1.25,"height":640,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Apexi_N1_Coilover_b4c39442-ffcd-45b1-8048-95d2a2b84659.jpg?v=1710170552","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Apexi\u003cbr\u003ePart Number: 264CM023\u003cbr\u003eMounts:Front Adjustable Camber Pillowball Upper Mount\u003cbr\u003eSpring Rates:\u003cbr\u003eFront:10kg\u003cbr\u003eRear: 7kg\u003cbr\u003e\u003cbr\u003eThe Apexi N1 Evo Damper Kit features a Monotube design with a 46mm Diameter strut Build for high spec street and track uses. \u003cbr\u003e\u003cbr\u003eUnlike traditional coilover kits that lower your car for general street driving, the Apexi N1 Evo Damper kit provides a lower ride and enhanced control thanks to higher spring rates and a redefined front \/ rear balance.\u003cbr\u003eThe full length adjustment allows a lowered setting without sacrificing sacrificing bump stroke travel.\u003cbr\u003eThe inverted monotube design features a large diameter for strength and predicability.GT race quality damper fluid that can withstand high temperatures and prevent damping force degradation\u003cbr\u003e\nThe Apexi N1 Evo offers a 25-step dampening adjustability for precise suspension tuning.\u003cbr\u003eThis suspension kit can be overhauled.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eLancer Evolution X | CZ4A Zenki (GSR Jdm\/MR) | 2007-2008 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Chuki (GSR Jdm\/MR) | 2008-2009 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Kouki (GSR Jdm\/MR) | 2009-2017 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Zenki (RS Jdm\/GSR) | 2007-2008 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Chuki (RS Jdm\/GSR) | 2008-2009 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Kouki (RS Jdm\/GSR) | 2009-2017 | TC | 4B11 | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":1954027241569,"title":"Apexi - N1 EVO Coilover Kit - Subaru Impreza WRX STi GDB APPLIED A to G","handle":"apexi-n1-evo-coilover-kit-subaru-impreza-wrx-sti-gdb-applied-a-to-g-265af010","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Apexi\u003cbr\u003ePart Number: 265AF010\u003cbr\u003eMounts:Front and Rear Adjustable Camber Pillowball Upper Mount\u003cbr\u003eSpring Rates:\u003cbr\u003eFront:14kg\u003cbr\u003eRear: 14kg\u003cbr\u003e\u003cbr\u003eThe Apexi N1 Evo Damper Kit features a Monotube design with a 46mm Diameter strut Build for high spec street and track uses. \u003cbr\u003e\u003cbr\u003eUnlike traditional coilover kits that lower your car for general street driving, the Apexi N1 Evo Damper kit provides a lower ride and enhanced control thanks to higher spring rates and a redefined front \/ rear balance.\u003cbr\u003eThe full length adjustment allows a lowered setting without sacrificing sacrificing bump stroke travel.\u003cbr\u003eThe inverted monotube design features a large diameter for strength and predicability.GT race quality damper fluid that can withstand high temperatures and prevent damping force degradation\u003cbr\u003e\nThe Apexi N1 Evo offers a 25-step dampening adjustability for precise suspension tuning.\u003cbr\u003eThis suspension kit can be overhauled.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eImpreza WRX STi | GDB APPLIED A | 2000-2001 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED B | 2001-2002 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED C | 2002-2003 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED D | 2003-2004 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED E | 2004-2005 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED F | 2005-2006 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED G | 2006-2007 | TC | EJ207 | H4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2019-02-07T15:40:53+08:00","created_at":"2019-02-07T15:40:54+08:00","vendor":"Apexi","type":"Coilovers and Springs","tags":["2000","2001","2002","2003","2004","2005","2006","2007","8","apexi","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","impreza-wrx-sti-gdb-applied-a-2000-2001-tc-ej207-h4","impreza-wrx-sti-gdb-applied-b-2001-2002-tc-ej207-h4","impreza-wrx-sti-gdb-applied-c-2002-2003-tc-ej207-h4","impreza-wrx-sti-gdb-applied-d-2003-2004-tc-ej207-h4","impreza-wrx-sti-gdb-applied-e-2004-2005-tc-ej207-h4","impreza-wrx-sti-gdb-applied-f-2005-2006-tc-ej207-h4","impreza-wrx-sti-gdb-applied-g-2006-2007-tc-ej207-h4","jp1","subaru","ws122"],"price":372590,"price_min":372590,"price_max":372590,"available":true,"price_varies":false,"compare_at_price":452400,"compare_at_price_min":452400,"compare_at_price_max":452400,"compare_at_price_varies":false,"variants":[{"id":18516343128161,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"265AF010","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Apexi - N1 EVO Coilover Kit - Subaru Impreza WRX STi GDB APPLIED A to G","public_title":null,"options":["Default Title"],"price":372590,"weight":45000,"compare_at_price":452400,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Apexi_N1_Coilover_88663f91-71de-4512-a084-056c587afce4.jpg?v=1710170552"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Apexi_N1_Coilover_88663f91-71de-4512-a084-056c587afce4.jpg?v=1710170552","options":["Title"],"media":[{"alt":"Apexi - N1 EVO Coilover Kit - Subaru Impreza WRX STi GDB APPLIED A to G - 265AF010 - Rzcrewgarage","id":25376450805942,"position":1,"preview_image":{"aspect_ratio":1.25,"height":640,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Apexi_N1_Coilover_88663f91-71de-4512-a084-056c587afce4.jpg?v=1710170552"},"aspect_ratio":1.25,"height":640,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Apexi_N1_Coilover_88663f91-71de-4512-a084-056c587afce4.jpg?v=1710170552","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Apexi\u003cbr\u003ePart Number: 265AF010\u003cbr\u003eMounts:Front and Rear Adjustable Camber Pillowball Upper Mount\u003cbr\u003eSpring Rates:\u003cbr\u003eFront:14kg\u003cbr\u003eRear: 14kg\u003cbr\u003e\u003cbr\u003eThe Apexi N1 Evo Damper Kit features a Monotube design with a 46mm Diameter strut Build for high spec street and track uses. \u003cbr\u003e\u003cbr\u003eUnlike traditional coilover kits that lower your car for general street driving, the Apexi N1 Evo Damper kit provides a lower ride and enhanced control thanks to higher spring rates and a redefined front \/ rear balance.\u003cbr\u003eThe full length adjustment allows a lowered setting without sacrificing sacrificing bump stroke travel.\u003cbr\u003eThe inverted monotube design features a large diameter for strength and predicability.GT race quality damper fluid that can withstand high temperatures and prevent damping force degradation\u003cbr\u003e\nThe Apexi N1 Evo offers a 25-step dampening adjustability for precise suspension tuning.\u003cbr\u003eThis suspension kit can be overhauled.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eImpreza WRX STi | GDB APPLIED A | 2000-2001 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED B | 2001-2002 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED C | 2002-2003 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED D | 2003-2004 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED E | 2004-2005 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED F | 2005-2006 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED G | 2006-2007 | TC | EJ207 | H4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":1954026979425,"title":"Apexi - N1 EVO Coilover Kit - Mitsubishi Lancer Evolution CT9A Evo 7\/8\/9","handle":"apexi-n1-evo-coilover-kit-mitsubishi-lancer-evolution-ct9a-evo-7-8-9-264cm020","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Apexi\u003cbr\u003ePart Number: 264CM020\u003cbr\u003eMounts:Front Adjustable Camber Pillowball Upper Mount\u003cbr\u003eSpring Rates:\u003cbr\u003eFront:6kg\u003cbr\u003eRear: 5kg\u003cbr\u003e\u003cbr\u003eThe Apexi N1 Evo Damper Kit features a Monotube design with a 46mm Diameter strut Build for high spec street and track uses. \u003cbr\u003e\u003cbr\u003eUnlike traditional coilover kits that lower your car for general street driving, the Apexi N1 Evo Damper kit provides a lower ride and enhanced control thanks to higher spring rates and a redefined front \/ rear balance.\u003cbr\u003eThe full length adjustment allows a lowered setting without sacrificing sacrificing bump stroke travel.\u003cbr\u003eThe inverted monotube design features a large diameter for strength and predicability.GT race quality damper fluid that can withstand high temperatures and prevent damping force degradation\u003cbr\u003e\nThe Apexi N1 Evo offers a 25-step dampening adjustability for precise suspension tuning.\u003cbr\u003eThis suspension kit can be overhauled.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eLancer Evolution VII | CT9A | 2001-2002 | TC | 4G63T 3rd Gen | I4\u003cbr\u003eLancer Evolution VIII | CT9A | 2003-2005 | TC | 4G63T Mivec | I4\u003cbr\u003eLancer Evolution IX | CT9A | 2005-2007 | TC | 4G63T Mivec | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2019-02-07T15:40:45+08:00","created_at":"2019-02-07T15:40:45+08:00","vendor":"Apexi","type":"Coilovers and Springs","tags":["2001","2002","2003","2004","2005","2006","2007","8","apexi","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","jp1","lancer-evolution-ix-ct9a-2005-2007-tc-4g63t-mivec-i4","lancer-evolution-vii-ct9a-2001-2002-tc-4g63t-3rd-gen-i4","lancer-evolution-viii-ct9a-2003-2005-tc-4g63t-mivec-i4","mitsubishi","ws123"],"price":317960,"price_min":317960,"price_max":317960,"available":true,"price_varies":false,"compare_at_price":386100,"compare_at_price_min":386100,"compare_at_price_max":386100,"compare_at_price_varies":false,"variants":[{"id":18516342866017,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"264CM020","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Apexi - N1 EVO Coilover Kit - Mitsubishi Lancer Evolution CT9A Evo 7\/8\/9","public_title":null,"options":["Default Title"],"price":317960,"weight":45000,"compare_at_price":386100,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Apexi_N1_Coilover_eb3a615a-76dd-4cd2-9e3d-3be464e61398.jpg?v=1710170540"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Apexi_N1_Coilover_eb3a615a-76dd-4cd2-9e3d-3be464e61398.jpg?v=1710170540","options":["Title"],"media":[{"alt":"Apexi - N1 EVO Coilover Kit - Mitsubishi Lancer Evolution CT9A Evo 7\/8\/9 - 264CM020 - Rzcrewgarage","id":25376449265846,"position":1,"preview_image":{"aspect_ratio":1.25,"height":640,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Apexi_N1_Coilover_eb3a615a-76dd-4cd2-9e3d-3be464e61398.jpg?v=1710170540"},"aspect_ratio":1.25,"height":640,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Apexi_N1_Coilover_eb3a615a-76dd-4cd2-9e3d-3be464e61398.jpg?v=1710170540","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Apexi\u003cbr\u003ePart Number: 264CM020\u003cbr\u003eMounts:Front Adjustable Camber Pillowball Upper Mount\u003cbr\u003eSpring Rates:\u003cbr\u003eFront:6kg\u003cbr\u003eRear: 5kg\u003cbr\u003e\u003cbr\u003eThe Apexi N1 Evo Damper Kit features a Monotube design with a 46mm Diameter strut Build for high spec street and track uses. \u003cbr\u003e\u003cbr\u003eUnlike traditional coilover kits that lower your car for general street driving, the Apexi N1 Evo Damper kit provides a lower ride and enhanced control thanks to higher spring rates and a redefined front \/ rear balance.\u003cbr\u003eThe full length adjustment allows a lowered setting without sacrificing sacrificing bump stroke travel.\u003cbr\u003eThe inverted monotube design features a large diameter for strength and predicability.GT race quality damper fluid that can withstand high temperatures and prevent damping force degradation\u003cbr\u003e\nThe Apexi N1 Evo offers a 25-step dampening adjustability for precise suspension tuning.\u003cbr\u003eThis suspension kit can be overhauled.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eLancer Evolution VII | CT9A | 2001-2002 | TC | 4G63T 3rd Gen | I4\u003cbr\u003eLancer Evolution VIII | CT9A | 2003-2005 | TC | 4G63T Mivec | I4\u003cbr\u003eLancer Evolution IX | CT9A | 2005-2007 | TC | 4G63T Mivec | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":1954026455137,"title":"Apexi - N1 EVO Coilover Kit - Nissan Fairlady Z Z33","handle":"apexi-n1-evo-coilover-kit-nissan-fairlady-z-z33-264cn052","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Apexi\u003cbr\u003ePart Number: 264CN052\u003cbr\u003eMounts:Front Pillowball Upper Mount\u003cbr\u003eSpring Rates:\u003cbr\u003eFront:10kg\u003cbr\u003eRear: 8kg\u003cbr\u003e\u003cbr\u003eThe Apexi N1 Evo Damper Kit features a Monotube design with a 46mm Diameter strut Build for high spec street and track uses. \u003cbr\u003e\u003cbr\u003eUnlike traditional coilover kits that lower your car for general street driving, the Apexi N1 Evo Damper kit provides a lower ride and enhanced control thanks to higher spring rates and a redefined front \/ rear balance.\u003cbr\u003eThe full length adjustment allows a lowered setting without sacrificing sacrificing bump stroke travel.\u003cbr\u003eThe inverted monotube design features a large diameter for strength and predicability.GT race quality damper fluid that can withstand high temperatures and prevent damping force degradation\u003cbr\u003e\nThe Apexi N1 Evo offers a 25-step dampening adjustability for precise suspension tuning.\u003cbr\u003eThis suspension kit can be overhauled.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eFairlady Z | Z33 Kouki | 2007-2008 | NA | VQ35HR | V6\u003cbr\u003eFairlady Z | Z33 Zenki | 2002-2004 | NA | VQ35DE | V6\u003cbr\u003eFairlady Z | Z33 Chuki | 2004-2005 | NA | VQ35DE | V6\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2019-02-07T15:40:31+08:00","created_at":"2019-02-07T15:40:31+08:00","vendor":"Apexi","type":"Coilovers and Springs","tags":["2002","2003","2004","2005","2006","2007","2008","8","apexi","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","fairlady-z-z33-chuki-2004-2005-na-vq35de-v6","fairlady-z-z33-kouki-2007-2008-na-vq35hr-v6","fairlady-z-z33-zenki-2002-2004-na-vq35de-v6","jp1","nissan","ws123"],"price":305740,"price_min":305740,"price_max":305740,"available":true,"price_varies":false,"compare_at_price":371300,"compare_at_price_min":371300,"compare_at_price_max":371300,"compare_at_price_varies":false,"variants":[{"id":18516342243425,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"264CN052","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Apexi - N1 EVO Coilover Kit - Nissan Fairlady Z Z33","public_title":null,"options":["Default Title"],"price":305740,"weight":45000,"compare_at_price":371300,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Apexi_N1_Coilover_b76e167d-cd20-4b65-8084-75bb97aeb63f.jpg?v=1710170535"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Apexi_N1_Coilover_b76e167d-cd20-4b65-8084-75bb97aeb63f.jpg?v=1710170535","options":["Title"],"media":[{"alt":"Apexi - N1 EVO Coilover Kit - Nissan Fairlady Z Z33 - 264CN052 - Rzcrewgarage","id":25376446775478,"position":1,"preview_image":{"aspect_ratio":1.25,"height":640,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Apexi_N1_Coilover_b76e167d-cd20-4b65-8084-75bb97aeb63f.jpg?v=1710170535"},"aspect_ratio":1.25,"height":640,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Apexi_N1_Coilover_b76e167d-cd20-4b65-8084-75bb97aeb63f.jpg?v=1710170535","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Apexi\u003cbr\u003ePart Number: 264CN052\u003cbr\u003eMounts:Front Pillowball Upper Mount\u003cbr\u003eSpring Rates:\u003cbr\u003eFront:10kg\u003cbr\u003eRear: 8kg\u003cbr\u003e\u003cbr\u003eThe Apexi N1 Evo Damper Kit features a Monotube design with a 46mm Diameter strut Build for high spec street and track uses. \u003cbr\u003e\u003cbr\u003eUnlike traditional coilover kits that lower your car for general street driving, the Apexi N1 Evo Damper kit provides a lower ride and enhanced control thanks to higher spring rates and a redefined front \/ rear balance.\u003cbr\u003eThe full length adjustment allows a lowered setting without sacrificing sacrificing bump stroke travel.\u003cbr\u003eThe inverted monotube design features a large diameter for strength and predicability.GT race quality damper fluid that can withstand high temperatures and prevent damping force degradation\u003cbr\u003e\nThe Apexi N1 Evo offers a 25-step dampening adjustability for precise suspension tuning.\u003cbr\u003eThis suspension kit can be overhauled.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eFairlady Z | Z33 Kouki | 2007-2008 | NA | VQ35HR | V6\u003cbr\u003eFairlady Z | Z33 Zenki | 2002-2004 | NA | VQ35DE | V6\u003cbr\u003eFairlady Z | Z33 Chuki | 2004-2005 | NA | VQ35DE | V6\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":1436895084641,"title":"Js Racing - Black Series Damper RS Coilover Kit - Honda S2000 AP2","handle":"js-racing-black-series-damper-rs-coilover-kit-honda-s2000-ap2-dbs-s2-rs","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Js Racing\u003cbr\u003ePart Number: DBS-S2-RS\u003cbr\u003eSpring Rates:\u003cbr\u003eFront:12kg\u003cbr\u003eRear: 12kg\u003cbr\u003e\u003cbr\u003eJ's Racing Black Series Damper RS series is a high spec street damper that focuses on performance. \u003cbr\u003e\u003cbr\u003eUnlike traditional coilover kits that lower your car for general street driving, the Black Series Damper RS kit provides a lower ride and enhanced control thanks to higher spring rates and a redefined front \/ rear balance.\u003cbr\u003eThe full length adjustment allows a lowered setting without sacrificing sacrificing bump stroke travel.\u003cbr\u003eThe inverted monotube design features a large diameter for strength and predicability.\u003cbr\u003e\nThe Black Series Damper RS offer a 15-step dampening adjustability for precise suspension tuning.\u003cbr\u003eThis suspension kit can be overhauled.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eS2000 | AP2 | 2003-2009 | NA | F22C | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-10-01T13:18:37+08:00","created_at":"2018-10-01T13:18:38+08:00","vendor":"Js Racing","type":"Coilovers and Springs","tags":["2003","2004","2005","2006","2007","2008","2009","coilovers-and-springs","dampening-and-height-adjustable","honda","jp1","js-racing","s2000-ap2-2003-2009-na-f22c-i4","ws124"],"price":117030,"price_min":117030,"price_max":117030,"available":true,"price_varies":false,"compare_at_price":136600,"compare_at_price_min":136600,"compare_at_price_max":136600,"compare_at_price_varies":false,"variants":[{"id":12442147160161,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DBS-S2-RS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Js Racing - Black Series Damper RS Coilover Kit - Honda S2000 AP2","public_title":null,"options":["Default Title"],"price":117030,"weight":30000,"compare_at_price":136600,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/DBS-S2-RS.jpg?v=1710167945"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/DBS-S2-RS.jpg?v=1710167945","options":["Title"],"media":[{"alt":"Js Racing - Black Series Damper RS Coilover Kit - Honda S2000 AP2 - RZCrewGarage","id":25374001397942,"position":1,"preview_image":{"aspect_ratio":1.444,"height":554,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/DBS-S2-RS.jpg?v=1710167945"},"aspect_ratio":1.444,"height":554,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/DBS-S2-RS.jpg?v=1710167945","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Js Racing\u003cbr\u003ePart Number: DBS-S2-RS\u003cbr\u003eSpring Rates:\u003cbr\u003eFront:12kg\u003cbr\u003eRear: 12kg\u003cbr\u003e\u003cbr\u003eJ's Racing Black Series Damper RS series is a high spec street damper that focuses on performance. \u003cbr\u003e\u003cbr\u003eUnlike traditional coilover kits that lower your car for general street driving, the Black Series Damper RS kit provides a lower ride and enhanced control thanks to higher spring rates and a redefined front \/ rear balance.\u003cbr\u003eThe full length adjustment allows a lowered setting without sacrificing sacrificing bump stroke travel.\u003cbr\u003eThe inverted monotube design features a large diameter for strength and predicability.\u003cbr\u003e\nThe Black Series Damper RS offer a 15-step dampening adjustability for precise suspension tuning.\u003cbr\u003eThis suspension kit can be overhauled.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eS2000 | AP2 | 2003-2009 | NA | F22C | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":1436894888033,"title":"Js Racing - Black Series Damper RS Coilover Kit - Honda Civic Type R FD2R","handle":"js-racing-black-series-damper-rs-coilover-kit-honda-civic-type-r-fd2r-dbs-d2-rs","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Js Racing\u003cbr\u003ePart Number: DBS-D2-RS\u003cbr\u003eMounts: Front Adjustable Camber Pillowball Upper Mount\u003cbr\u003eSpring Rates:\u003cbr\u003eFront:10kg\u003cbr\u003eRear: 14kg\u003cbr\u003e\u003cbr\u003eJ's Racing Black Series Damper RS series is a high spec street damper that focuses on performance. \u003cbr\u003e\u003cbr\u003eUnlike traditional coilover kits that lower your car for general street driving, the Black Series Damper RS kit provides a lower ride and enhanced control thanks to higher spring rates and a redefined front \/ rear balance.\u003cbr\u003eThe full length adjustment allows a lowered setting without sacrificing sacrificing bump stroke travel.\u003cbr\u003eThe inverted monotube design features a large diameter for strength and predicability.\u003cbr\u003e\nThe Black Series Damper RS offer a 15-step dampening adjustability for precise suspension tuning.\u003cbr\u003eThis suspension kit can be overhauled.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic Type R | FD2R | 2007-2010 | NA | K20A | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-10-01T13:18:29+08:00","created_at":"2018-10-01T13:18:30+08:00","vendor":"Js Racing","type":"Coilovers and Springs","tags":["2007","2008","2009","2010","civic-type-r-fd2r-2007-2010-na-k20a-i4","coilovers-and-springs","dampening-and-height-adjustable","honda","jp1","js-racing","ws124"],"price":117030,"price_min":117030,"price_max":117030,"available":true,"price_varies":false,"compare_at_price":136600,"compare_at_price_min":136600,"compare_at_price_max":136600,"compare_at_price_varies":false,"variants":[{"id":12442146963553,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DBS-D2-RS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Js Racing - Black Series Damper RS Coilover Kit - Honda Civic Type R FD2R","public_title":null,"options":["Default Title"],"price":117030,"weight":30000,"compare_at_price":136600,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/DBS-D2-RS.jpg?v=1710167943"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/DBS-D2-RS.jpg?v=1710167943","options":["Title"],"media":[{"alt":"Js Racing - Black Series Damper RS Coilover Kit - Honda Civic Type R FD2R - RZCrewGarage","id":25374000677046,"position":1,"preview_image":{"aspect_ratio":1.487,"height":538,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/DBS-D2-RS.jpg?v=1710167943"},"aspect_ratio":1.487,"height":538,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/DBS-D2-RS.jpg?v=1710167943","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Js Racing\u003cbr\u003ePart Number: DBS-D2-RS\u003cbr\u003eMounts: Front Adjustable Camber Pillowball Upper Mount\u003cbr\u003eSpring Rates:\u003cbr\u003eFront:10kg\u003cbr\u003eRear: 14kg\u003cbr\u003e\u003cbr\u003eJ's Racing Black Series Damper RS series is a high spec street damper that focuses on performance. \u003cbr\u003e\u003cbr\u003eUnlike traditional coilover kits that lower your car for general street driving, the Black Series Damper RS kit provides a lower ride and enhanced control thanks to higher spring rates and a redefined front \/ rear balance.\u003cbr\u003eThe full length adjustment allows a lowered setting without sacrificing sacrificing bump stroke travel.\u003cbr\u003eThe inverted monotube design features a large diameter for strength and predicability.\u003cbr\u003e\nThe Black Series Damper RS offer a 15-step dampening adjustability for precise suspension tuning.\u003cbr\u003eThis suspension kit can be overhauled.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic Type R | FD2R | 2007-2010 | NA | K20A | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":1436894724193,"title":"Js Racing - Black Series Damper RS Coilover Kit - Honda Accord CL7\/CL9","handle":"js-racing-black-series-damper-rs-coilover-kit-honda-accord-cl7-cl9-dbs-e2-rs","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Js Racing\u003cbr\u003ePart Number: DBS-E2-RS\u003cbr\u003eSpring Rates:\u003cbr\u003eFront:12kg\u003cbr\u003eRear: 12kg\u003cbr\u003e\u003cbr\u003eJ's Racing Black Series Damper RS series is a high spec street damper that focuses on performance. \u003cbr\u003e\u003cbr\u003eUnlike traditional coilover kits that lower your car for general street driving, the Black Series Damper RS kit provides a lower ride and enhanced control thanks to higher spring rates and a redefined front \/ rear balance.\u003cbr\u003eThe full length adjustment allows a lowered setting without sacrificing sacrificing bump stroke travel.\u003cbr\u003eThe inverted monotube design features a large diameter for strength and predicability.\u003cbr\u003e\nThe Black Series Damper RS offer a 15-step dampening adjustability for precise suspension tuning.\u003cbr\u003eThis suspension kit can be overhauled.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eAccord Euro R | CL7 | 2002-2008 | NA | K20A | I4\u003cbr\u003eAccord | CL9 | 2002-2008 | NA | K24A3 | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-10-01T13:18:19+08:00","created_at":"2018-10-01T13:18:21+08:00","vendor":"Js Racing","type":"Coilovers and Springs","tags":["2002","2003","2004","2005","2006","2007","2008","accord-cl9-2002-2008-na-k24a3-i4","accord-euro-r-cl7-2002-2008-na-k20a-i4","coilovers-and-springs","dampening-and-height-adjustable","honda","jp1","js-racing","ws124"],"price":117030,"price_min":117030,"price_max":117030,"available":true,"price_varies":false,"compare_at_price":136600,"compare_at_price_min":136600,"compare_at_price_max":136600,"compare_at_price_varies":false,"variants":[{"id":12442146799713,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DBS-E2-RS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Js Racing - Black Series Damper RS Coilover Kit - Honda Accord CL7\/CL9","public_title":null,"options":["Default Title"],"price":117030,"weight":30000,"compare_at_price":136600,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/DBS-E2-RS.jpg?v=1710167940"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/DBS-E2-RS.jpg?v=1710167940","options":["Title"],"media":[{"alt":"Js Racing - Black Series Damper RS Coilover Kit - Honda Accord CL7\/CL9 - RZCrewGarage","id":25374000316598,"position":1,"preview_image":{"aspect_ratio":1.423,"height":562,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/DBS-E2-RS.jpg?v=1710167940"},"aspect_ratio":1.423,"height":562,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/DBS-E2-RS.jpg?v=1710167940","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Js Racing\u003cbr\u003ePart Number: DBS-E2-RS\u003cbr\u003eSpring Rates:\u003cbr\u003eFront:12kg\u003cbr\u003eRear: 12kg\u003cbr\u003e\u003cbr\u003eJ's Racing Black Series Damper RS series is a high spec street damper that focuses on performance. \u003cbr\u003e\u003cbr\u003eUnlike traditional coilover kits that lower your car for general street driving, the Black Series Damper RS kit provides a lower ride and enhanced control thanks to higher spring rates and a redefined front \/ rear balance.\u003cbr\u003eThe full length adjustment allows a lowered setting without sacrificing sacrificing bump stroke travel.\u003cbr\u003eThe inverted monotube design features a large diameter for strength and predicability.\u003cbr\u003e\nThe Black Series Damper RS offer a 15-step dampening adjustability for precise suspension tuning.\u003cbr\u003eThis suspension kit can be overhauled.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eAccord Euro R | CL7 | 2002-2008 | NA | K20A | I4\u003cbr\u003eAccord | CL9 | 2002-2008 | NA | K24A3 | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":1433323962465,"title":"Spoon Rigid Collar Kit - Rear - Suzuki Swift Sport ZC31S","handle":"spoon-rigid-collar-kit-rear-suzuki-swift-sport-zc31s-50300-swi-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-SWI-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC31S | 2004-2010 | NA | M16A | I4\u003c!--split--\u003e","published_at":"2018-09-23T15:25:10+08:00","created_at":"2018-09-23T15:25:11+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2004","2005","2006","2007","2008","2009","2010","collar-kits","jp1","rear","rigid-collars","spoon","suzuki","swift-sport-zc31s-2004-2010-na-m16a-i4","ws18","ZC31S"],"price":5910,"price_min":5910,"price_max":5910,"available":true,"price_varies":false,"compare_at_price":6000,"compare_at_price_min":6000,"compare_at_price_max":6000,"compare_at_price_varies":false,"variants":[{"id":12435581436001,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-SWI-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Suzuki Swift Sport ZC31S","public_title":null,"options":["Default Title"],"price":5910,"weight":1100,"compare_at_price":6000,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_5c56f101-3e1e-44cf-90ae-3928f211515a.jpg?v=1710167940"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_5c56f101-3e1e-44cf-90ae-3928f211515a.jpg?v=1710167940","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Suzuki Swift Sport ZC31S - 50300-SWI-000 - RZCrewGarage","id":22882185969846,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_5c56f101-3e1e-44cf-90ae-3928f211515a.jpg?v=1710167940"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_5c56f101-3e1e-44cf-90ae-3928f211515a.jpg?v=1710167940","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-SWI-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC31S | 2004-2010 | NA | M16A | I4\u003c!--split--\u003e"}

{"id":1433323929697,"title":"Spoon Rigid Collar Kit - Front - Suzuki Swift Sport ZC31S","handle":"spoon-rigid-collar-kit-front-suzuki-swift-sport-zc31s-50261-zc7-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-ZC7-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC31S | 2004-2010 | NA | M16A | I4\u003c!--split--\u003e","published_at":"2018-09-23T15:25:09+08:00","created_at":"2018-09-23T15:25:10+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2004","2005","2006","2007","2008","2009","2010","collar-kits","front","jp1","rigid-collars","spoon","suzuki","swift-sport-zc31s-2004-2010-na-m16a-i4","ws18","ZC31S"],"price":21090,"price_min":21090,"price_max":21090,"available":true,"price_varies":false,"compare_at_price":21400,"compare_at_price_min":21400,"compare_at_price_max":21400,"compare_at_price_varies":false,"variants":[{"id":12435581403233,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-ZC7-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Suzuki Swift Sport ZC31S","public_title":null,"options":["Default Title"],"price":21090,"weight":1100,"compare_at_price":21400,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_66fc310c-132b-4b80-83bd-bbeadf312d89.jpg?v=1710167940"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_66fc310c-132b-4b80-83bd-bbeadf312d89.jpg?v=1710167940","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Suzuki Swift Sport ZC31S - 50261-ZC7-000 - RZCrewGarage","id":22882185838774,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_66fc310c-132b-4b80-83bd-bbeadf312d89.jpg?v=1710167940"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_66fc310c-132b-4b80-83bd-bbeadf312d89.jpg?v=1710167940","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-ZC7-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC31S | 2004-2010 | NA | M16A | I4\u003c!--split--\u003e"}

{"id":1433323733089,"title":"Spoon Rigid Collar Kit - Rear - Suzuki Cervo HG21S","handle":"spoon-rigid-collar-kit-rear-suzuki-cervo-hg21s-50300-h22-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-H22-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCervo | HG21S | 2006-2010 | TC | K6A | I3\u003c!--split--\u003e","published_at":"2018-09-23T15:25:02+08:00","created_at":"2018-09-23T15:25:03+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2006","2007","2008","2009","2010","cervo-hg21s-2006-2010-tc-k6a-i3","collar-kits","HG21S","jp1","rear","rigid-collars","spoon","suzuki","ws18"],"price":5910,"price_min":5910,"price_max":5910,"available":true,"price_varies":false,"compare_at_price":6000,"compare_at_price_min":6000,"compare_at_price_max":6000,"compare_at_price_varies":false,"variants":[{"id":12435581239393,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-H22-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Suzuki Cervo HG21S","public_title":null,"options":["Default Title"],"price":5910,"weight":1100,"compare_at_price":6000,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_e037a88b-1534-42b4-b109-5edca8cce3bb.jpg?v=1710167937"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_e037a88b-1534-42b4-b109-5edca8cce3bb.jpg?v=1710167937","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Suzuki Cervo HG21S - 50300-H22-000 - RZCrewGarage","id":22882185085110,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_e037a88b-1534-42b4-b109-5edca8cce3bb.jpg?v=1710167937"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_e037a88b-1534-42b4-b109-5edca8cce3bb.jpg?v=1710167937","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-H22-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCervo | HG21S | 2006-2010 | TC | K6A | I3\u003c!--split--\u003e"}

{"id":1433323700321,"title":"Spoon Rigid Collar Kit - Front - Suzuki Cervo HG21S","handle":"spoon-rigid-collar-kit-front-suzuki-cervo-hg21s-50261-h21-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-H21-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCervo | HG21S | 2006-2010 | TC | K6A | I3\u003c!--split--\u003e","published_at":"2018-09-23T15:25:01+08:00","created_at":"2018-09-23T15:25:02+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2006","2007","2008","2009","2010","cervo-hg21s-2006-2010-tc-k6a-i3","collar-kits","front","HG21S","jp1","rigid-collars","spoon","suzuki","ws18"],"price":14760,"price_min":14760,"price_max":14760,"available":true,"price_varies":false,"compare_at_price":15000,"compare_at_price_min":15000,"compare_at_price_max":15000,"compare_at_price_varies":false,"variants":[{"id":12435581206625,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-H21-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Suzuki Cervo HG21S","public_title":null,"options":["Default Title"],"price":14760,"weight":1100,"compare_at_price":15000,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_d7d95cb7-ba6a-42f5-ad8b-3b03395a2c68.jpg?v=1710167938"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_d7d95cb7-ba6a-42f5-ad8b-3b03395a2c68.jpg?v=1710167938","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Suzuki Cervo HG21S - 50261-H21-000 - RZCrewGarage","id":22882184954038,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_d7d95cb7-ba6a-42f5-ad8b-3b03395a2c68.jpg?v=1710167938"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_d7d95cb7-ba6a-42f5-ad8b-3b03395a2c68.jpg?v=1710167938","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-H21-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCervo | HG21S | 2006-2010 | TC | K6A | I3\u003c!--split--\u003e"}

{"id":1433323602017,"title":"Spoon Rigid Collar Kit - Rear - Suzuki Kei HN22S","handle":"spoon-rigid-collar-kit-rear-suzuki-kei-hn22s-50300-h22-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-H22-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eKei | HN22S | 1998-2009 | TC | K6A | I3\u003c!--split--\u003e","published_at":"2018-09-23T15:24:56+08:00","created_at":"2018-09-23T15:24:58+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","collar-kits","HN22S","jp1","kei-hn22s-1998-2009-tc-k6a-i3","rear","rigid-collars","spoon","suzuki","ws18"],"price":5910,"price_min":5910,"price_max":5910,"available":true,"price_varies":false,"compare_at_price":6000,"compare_at_price_min":6000,"compare_at_price_max":6000,"compare_at_price_varies":false,"variants":[{"id":12435581108321,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-H22-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Suzuki Kei HN22S","public_title":null,"options":["Default Title"],"price":5910,"weight":1100,"compare_at_price":6000,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_589558db-8bc6-4948-b564-03f21aa33663.jpg?v=1710167936"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_589558db-8bc6-4948-b564-03f21aa33663.jpg?v=1710167936","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Suzuki Kei HN22S - 50300-H22-000 - RZCrewGarage","id":22882184855734,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_589558db-8bc6-4948-b564-03f21aa33663.jpg?v=1710167936"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_589558db-8bc6-4948-b564-03f21aa33663.jpg?v=1710167936","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-H22-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eKei | HN22S | 1998-2009 | TC | K6A | I3\u003c!--split--\u003e"}

{"id":1433323569249,"title":"Spoon Rigid Collar Kit - Front - Suzuki Kei HN22S","handle":"spoon-rigid-collar-kit-front-suzuki-kei-hn22s-50261-n22-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-N22-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eKei | HN22S | 1998-2009 | TC | K6A | I3\u003c!--split--\u003e","published_at":"2018-09-23T15:24:55+08:00","created_at":"2018-09-23T15:24:56+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","collar-kits","front","HN22S","jp1","kei-hn22s-1998-2009-tc-k6a-i3","rigid-collars","spoon","suzuki","ws18"],"price":14760,"price_min":14760,"price_max":14760,"available":true,"price_varies":false,"compare_at_price":15000,"compare_at_price_min":15000,"compare_at_price_max":15000,"compare_at_price_varies":false,"variants":[{"id":12435581075553,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-N22-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Suzuki Kei HN22S","public_title":null,"options":["Default Title"],"price":14760,"weight":1100,"compare_at_price":15000,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_83171e7d-6daf-4f49-9370-89b9fb79ec49.jpg?v=1710167936"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_83171e7d-6daf-4f49-9370-89b9fb79ec49.jpg?v=1710167936","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Suzuki Kei HN22S - 50261-N22-000 - RZCrewGarage","id":22882184822966,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_83171e7d-6daf-4f49-9370-89b9fb79ec49.jpg?v=1710167936"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_83171e7d-6daf-4f49-9370-89b9fb79ec49.jpg?v=1710167936","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-N22-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eKei | HN22S | 1998-2009 | TC | K6A | I3\u003c!--split--\u003e"}

{"id":1433323536481,"title":"Spoon Rigid Collar Kit - Front - Daihatsu Boon X4 M312S","handle":"spoon-rigid-collar-kit-front-daihatsu-boon-x4-m312s-50261-pas-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-PAS-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBoon X4 | M312S | 2006-2018 | TC | KJ-VET | I4\u003c!--split--\u003e","published_at":"2018-09-23T15:24:54+08:00","created_at":"2018-09-23T15:24:55+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","boon-x4-m312s-2006-2018-tc-kj-vet-i4","collar-kits","daihatsu","front","jp1","M312S","rigid-collars","spoon","ws18"],"price":21090,"price_min":21090,"price_max":21090,"available":true,"price_varies":false,"compare_at_price":21400,"compare_at_price_min":21400,"compare_at_price_max":21400,"compare_at_price_varies":false,"variants":[{"id":12435581042785,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-PAS-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Daihatsu Boon X4 M312S","public_title":null,"options":["Default Title"],"price":21090,"weight":1100,"compare_at_price":21400,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_02f03f95-0439-47f8-a5ec-003a3c992a11.jpg?v=1710167936"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_02f03f95-0439-47f8-a5ec-003a3c992a11.jpg?v=1710167936","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Daihatsu Boon X4 M312S - 50261-PAS-000 - RZCrewGarage","id":22882184790198,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_02f03f95-0439-47f8-a5ec-003a3c992a11.jpg?v=1710167936"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_02f03f95-0439-47f8-a5ec-003a3c992a11.jpg?v=1710167936","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-PAS-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBoon X4 | M312S | 2006-2018 | TC | KJ-VET | I4\u003c!--split--\u003e"}

{"id":1433323438177,"title":"Spoon Rigid Collar Kit - Rear - Daihatsu Latte L550S","handle":"spoon-rigid-collar-kit-rear-daihatsu-latte-l550s-50300-cop-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-COP-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eLatte | L550S | 2004-2007 | TC | EF-DET | I3\u003c!--split--\u003e","published_at":"2018-09-23T15:24:50+08:00","created_at":"2018-09-23T15:24:51+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2004","2005","2006","2007","collar-kits","daihatsu","jp1","L550S","latte-l550s-2004-2007-tc-ef-det-i3","rear","rigid-collars","spoon","ws18"],"price":5910,"price_min":5910,"price_max":5910,"available":true,"price_varies":false,"compare_at_price":6000,"compare_at_price_min":6000,"compare_at_price_max":6000,"compare_at_price_varies":false,"variants":[{"id":12435580944481,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-COP-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Daihatsu Latte L550S","public_title":null,"options":["Default Title"],"price":5910,"weight":1100,"compare_at_price":6000,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_ae2d35f8-ef3b-42bb-aba2-b78623f43b1e.jpg?v=1710167927"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_ae2d35f8-ef3b-42bb-aba2-b78623f43b1e.jpg?v=1710167927","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Daihatsu Latte L550S - 50300-COP-000 - RZCrewGarage","id":22882184691894,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_ae2d35f8-ef3b-42bb-aba2-b78623f43b1e.jpg?v=1710167927"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_ae2d35f8-ef3b-42bb-aba2-b78623f43b1e.jpg?v=1710167927","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-COP-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eLatte | L550S | 2004-2007 | TC | EF-DET | I3\u003c!--split--\u003e"}

{"id":1433323405409,"title":"Spoon Rigid Collar Kit - Front - Daihatsu Latte L550S","handle":"spoon-rigid-collar-kit-front-daihatsu-latte-l550s-50261-cop-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-COP-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eLatte | L550S | 2004-2007 | TC | EF-DET | I3\u003c!--split--\u003e","published_at":"2018-09-23T15:24:48+08:00","created_at":"2018-09-23T15:24:49+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2004","2005","2006","2007","collar-kits","daihatsu","front","jp1","L550S","latte-l550s-2004-2007-tc-ef-det-i3","rigid-collars","spoon","ws18"],"price":14760,"price_min":14760,"price_max":14760,"available":true,"price_varies":false,"compare_at_price":15000,"compare_at_price_min":15000,"compare_at_price_max":15000,"compare_at_price_varies":false,"variants":[{"id":12435580911713,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-COP-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Daihatsu Latte L550S","public_title":null,"options":["Default Title"],"price":14760,"weight":1100,"compare_at_price":15000,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_20f81640-97ef-412b-bb49-f174a6d477a4.jpg?v=1710167927"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_20f81640-97ef-412b-bb49-f174a6d477a4.jpg?v=1710167927","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Daihatsu Latte L550S - 50261-COP-000 - RZCrewGarage","id":22882184659126,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_20f81640-97ef-412b-bb49-f174a6d477a4.jpg?v=1710167927"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_20f81640-97ef-412b-bb49-f174a6d477a4.jpg?v=1710167927","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-COP-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eLatte | L550S | 2004-2007 | TC | EF-DET | I3\u003c!--split--\u003e"}

{"id":1433322782817,"title":"Spoon Rigid Collar Kit - Rear - Daihatsu Tanto L350S","handle":"spoon-rigid-collar-kit-rear-daihatsu-tanto-l350s-50300-cop-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-COP-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eTanto | L350S | 2005-2007 | NA | EF-VE | I3\u003c!--split--\u003e","published_at":"2018-09-23T15:24:23+08:00","created_at":"2018-09-23T15:24:24+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2005","2006","2007","collar-kits","daihatsu","jp1","L350S","rear","rigid-collars","spoon","tanto-l350s-2005-2007-na-ef-ve-i3","ws18"],"price":5910,"price_min":5910,"price_max":5910,"available":true,"price_varies":false,"compare_at_price":6000,"compare_at_price_min":6000,"compare_at_price_max":6000,"compare_at_price_varies":false,"variants":[{"id":12435580158049,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-COP-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Daihatsu Tanto L350S","public_title":null,"options":["Default Title"],"price":5910,"weight":1100,"compare_at_price":6000,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_3e6ea055-b84d-494d-8a16-324f12f5f9fa.jpg?v=1710167918"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_3e6ea055-b84d-494d-8a16-324f12f5f9fa.jpg?v=1710167918","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Daihatsu Tanto L350S - 50300-COP-000 - RZCrewGarage","id":22882182955190,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_3e6ea055-b84d-494d-8a16-324f12f5f9fa.jpg?v=1710167918"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_3e6ea055-b84d-494d-8a16-324f12f5f9fa.jpg?v=1710167918","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-COP-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eTanto | L350S | 2005-2007 | NA | EF-VE | I3\u003c!--split--\u003e"}

{"id":1433322750049,"title":"Spoon Rigid Collar Kit - Front - Daihatsu Tanto L350S","handle":"spoon-rigid-collar-kit-front-daihatsu-tanto-l350s-50261-cop-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-COP-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eTanto | L350S | 2005-2007 | NA | EF-VE | I3\u003c!--split--\u003e","published_at":"2018-09-23T15:24:21+08:00","created_at":"2018-09-23T15:24:22+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2005","2006","2007","collar-kits","daihatsu","front","jp1","L350S","rigid-collars","spoon","tanto-l350s-2005-2007-na-ef-ve-i3","ws18"],"price":14760,"price_min":14760,"price_max":14760,"available":true,"price_varies":false,"compare_at_price":15000,"compare_at_price_min":15000,"compare_at_price_max":15000,"compare_at_price_varies":false,"variants":[{"id":12435580125281,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-COP-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Daihatsu Tanto L350S","public_title":null,"options":["Default Title"],"price":14760,"weight":1100,"compare_at_price":15000,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_51d950b3-f989-4619-9dd3-154cc79f1197.jpg?v=1710167918"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_51d950b3-f989-4619-9dd3-154cc79f1197.jpg?v=1710167918","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Daihatsu Tanto L350S - 50261-COP-000 - RZCrewGarage","id":22882182922422,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_51d950b3-f989-4619-9dd3-154cc79f1197.jpg?v=1710167918"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_51d950b3-f989-4619-9dd3-154cc79f1197.jpg?v=1710167918","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-COP-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eTanto | L350S | 2005-2007 | NA | EF-VE | I3\u003c!--split--\u003e"}

{"id":1433322651745,"title":"Spoon Rigid Collar Kit - Rear - Daihatsu Copen L880K","handle":"spoon-rigid-collar-kit-rear-daihatsu-copen-l880k-50300-cop-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-COP-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCopen | L880K | 2002-2012 | TC | JB-DET | I4\u003c!--split--\u003e","published_at":"2018-09-23T15:24:17+08:00","created_at":"2018-09-23T15:24:18+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","collar-kits","copen-l880k-2002-2012-tc-jb-det-i4","daihatsu","jp1","L880K","rear","rigid-collars","spoon","ws18"],"price":5910,"price_min":5910,"price_max":5910,"available":true,"price_varies":false,"compare_at_price":6000,"compare_at_price_min":6000,"compare_at_price_max":6000,"compare_at_price_varies":false,"variants":[{"id":12435580026977,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-COP-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Daihatsu Copen L880K","public_title":null,"options":["Default Title"],"price":5910,"weight":1100,"compare_at_price":6000,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_a6c58c7d-1b49-4b5f-bbc2-0585cf2e1bc4.jpg?v=1710167918"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_a6c58c7d-1b49-4b5f-bbc2-0585cf2e1bc4.jpg?v=1710167918","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Daihatsu Copen L880K - 50300-COP-000 - RZCrewGarage","id":22882182529206,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_a6c58c7d-1b49-4b5f-bbc2-0585cf2e1bc4.jpg?v=1710167918"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_a6c58c7d-1b49-4b5f-bbc2-0585cf2e1bc4.jpg?v=1710167918","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-COP-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCopen | L880K | 2002-2012 | TC | JB-DET | I4\u003c!--split--\u003e"}

{"id":1433322618977,"title":"Spoon Rigid Collar Kit - Front - Daihatsu Copen L880K","handle":"spoon-rigid-collar-kit-front-daihatsu-copen-l880k-50261-cop-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-COP-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCopen | L880K | 2002-2012 | TC | JB-DET | I4\u003c!--split--\u003e","published_at":"2018-09-23T15:24:16+08:00","created_at":"2018-09-23T15:24:17+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","collar-kits","copen-l880k-2002-2012-tc-jb-det-i4","daihatsu","front","jp1","L880K","rigid-collars","spoon","ws18"],"price":14760,"price_min":14760,"price_max":14760,"available":true,"price_varies":false,"compare_at_price":15000,"compare_at_price_min":15000,"compare_at_price_max":15000,"compare_at_price_varies":false,"variants":[{"id":12435579994209,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-COP-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Daihatsu Copen L880K","public_title":null,"options":["Default Title"],"price":14760,"weight":1100,"compare_at_price":15000,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_887a0054-c6a0-4c64-82a7-fd663f3f1a30.jpg?v=1710167909"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_887a0054-c6a0-4c64-82a7-fd663f3f1a30.jpg?v=1710167909","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Daihatsu Copen L880K - 50261-COP-000 - RZCrewGarage","id":22882182430902,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_887a0054-c6a0-4c64-82a7-fd663f3f1a30.jpg?v=1710167909"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_887a0054-c6a0-4c64-82a7-fd663f3f1a30.jpg?v=1710167909","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-COP-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCopen | L880K | 2002-2012 | TC | JB-DET | I4\u003c!--split--\u003e"}

{"id":1433322586209,"title":"Spoon Rigid Collar Kit - Rear - Daihatsu Essay L235S","handle":"spoon-rigid-collar-kit-rear-daihatsu-essay-l235s-50300-cop-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-COP-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eEssay | L235S | 2005-2011 | NA | KF-VE | I3\u003c!--split--\u003e","published_at":"2018-09-23T15:24:14+08:00","created_at":"2018-09-23T15:24:15+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2005","2006","2007","2008","2009","2010","2011","collar-kits","daihatsu","essay-l235s-2005-2011-na-kf-ve-i3","jp1","L235S","rear","rigid-collars","spoon","ws18"],"price":5910,"price_min":5910,"price_max":5910,"available":true,"price_varies":false,"compare_at_price":6000,"compare_at_price_min":6000,"compare_at_price_max":6000,"compare_at_price_varies":false,"variants":[{"id":12435579961441,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-COP-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Daihatsu Essay L235S","public_title":null,"options":["Default Title"],"price":5910,"weight":1100,"compare_at_price":6000,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_ae6b9438-fbd7-4030-a033-507891565e67.jpg?v=1710167909"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_ae6b9438-fbd7-4030-a033-507891565e67.jpg?v=1710167909","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Daihatsu Essay L235S - 50300-COP-000 - RZCrewGarage","id":22882182398134,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_ae6b9438-fbd7-4030-a033-507891565e67.jpg?v=1710167909"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_ae6b9438-fbd7-4030-a033-507891565e67.jpg?v=1710167909","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-COP-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eEssay | L235S | 2005-2011 | NA | KF-VE | I3\u003c!--split--\u003e"}