HKS

{"id":6790924632246,"title":"HKS - Coilover Suspension Full Kit Hipermax S - Honda Civic Type-R FD2 (2006-2010)","handle":"hks-coilover-suspension-full-kit-hipermax-s-honda-civic-type-r-fd2-2006-2010-80300-ah003","description":"SPECIFICATIONS:\u003cbr\u003eManufacturer: HKS\u003cbr\u003eAdjustability: Dampening and Height Adjustable\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eSeries: Hipermax S\u003cbr\u003eSpring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: 88(9)\u003cbr\u003e- Rear: 69(7)\u003cbr\u003eFree Height (mm):\u003cbr\u003e- Front: 220(Barrel)\u003cbr\u003e- Rear:170\u003cbr\u003eRecommended Range to change Spring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: N\/A\u003cbr\u003eDamper Force (Rebound\/Damping):\u003cbr\u003e- Front: 814\/333\u003cbr\u003e- Rear: 304\/284\u003cbr\u003e- Note: Damping force is at piston speed 0.1m\/sec.\u003cbr\u003eDefault position of Dial:\u003cbr\u003e- Front: 15\u003cbr\u003e- Rear: 15\u003cbr\u003eDamping Force Adjustment:\u003cbr\u003e- Front: 30 Steps\u003cbr\u003e- Rear: 30 Steps\u003cbr\u003eHeight Adjustable Lower Bracket:\u003cbr\u003e- Front: Yes\u003cbr\u003e- Rear: Yes\u003cbr\u003eUpper Mount:\u003cbr\u003e- Front: Rubber Bush\u003cbr\u003e- Rear: OEM\u003cbr\u003eDamper Layout:\u003cbr\u003e- Front: Inverted\u003cbr\u003e- Rear: Normal\u003cbr\u003eDamper\/Spring Layout:\u003cbr\u003e- Front: Coilover\u003cbr\u003e- Rear: Separate\u003cbr\u003eDamping force adjustable with Wire:\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: Yes\u003cbr\u003eHelper Spring (Spring Rate N\/mm):\u003cbr\u003e- Front: 19.8\u003cbr\u003e- Rear: N\/A\u003cbr\u003eRide Height Specification -\u003cbr\u003e-Maximum Adjustable Range High - Low (mm):\u003cbr\u003e-- Front: ～ -67\u003cbr\u003e-- Rear: -6 ～ -47\u003cbr\u003e-Drivable Range High - Low (mm):\u003cbr\u003e-- Front: ～ -67\u003cbr\u003e-- Rear: -6 ～ -47\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- 6MT vehicles 03\/2007~ 08\/2010 only\u003cbr\u003e- Compatibility with Mugen RR unconfirmedThis set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV GT release this series has unified the many different street based Hipermax merits and further improved this new flagship series for the ultimate combination of driving performance and comfort performance, Driving Comfort. With exception of the circuit specific HIpermax IV SP series all other series will be replaced with this all-mighty spec. Specifically developed to provide the ultimate in harmony between performance handling and control with supreme ride comfort yet capable of high level performance on circuit as well. With massive adjustability in ride height and damper settings these items are an excellent choice for the daily driver to look and perform best under any kind of circumstance.\u003cbr\u003eDISCLAIMER:\u003cbr\u003e\u003cbr\u003eProduct picture is generic. Actual shape may differ.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eHonda - Civic Type-R - FD2 (2006-2008) K20A\u003cbr\u003eHonda - Civic Type-R - FD2 (2008-2010) K20A\u003c!--split--\u003e","published_at":"2021-06-15T16:39:46+08:00","created_at":"2021-06-15T16:39:46+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2006","2007","2008","2009","2010","civic-type-r-fd2r-2007-2010-na-k20a-i4","coilovers-and-springs","dampening-and-height-adjustable","hks","honda","jp1","ws126"],"price":207340,"price_min":207340,"price_max":207340,"available":true,"price_varies":false,"compare_at_price":238320,"compare_at_price_min":238320,"compare_at_price_max":238320,"compare_at_price_varies":false,"variants":[{"id":39940169171126,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80300-AH003","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - Coilover Suspension Full Kit Hipermax S - Honda Civic Type-R FD2 (2006-2010)","public_title":null,"options":["Default Title"],"price":207340,"weight":45000,"compare_at_price":238320,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-honda-civic-type-r-fd2-2006-2010-rzcrew.jpg?v=1710324724"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-honda-civic-type-r-fd2-2006-2010-rzcrew.jpg?v=1710324724","options":["Title"],"media":[{"alt":"HKS - Coilover Suspension Full Kit Hipermax S - Honda Civic Type-R FD2 (2006-2010) - 80300-AH003 - Rzcrewgarage","id":22891682955446,"position":1,"preview_image":{"aspect_ratio":1.21,"height":496,"width":600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-honda-civic-type-r-fd2-2006-2010-rzcrew.jpg?v=1710324724"},"aspect_ratio":1.21,"height":496,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-honda-civic-type-r-fd2-2006-2010-rzcrew.jpg?v=1710324724","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS:\u003cbr\u003eManufacturer: HKS\u003cbr\u003eAdjustability: Dampening and Height Adjustable\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eSeries: Hipermax S\u003cbr\u003eSpring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: 88(9)\u003cbr\u003e- Rear: 69(7)\u003cbr\u003eFree Height (mm):\u003cbr\u003e- Front: 220(Barrel)\u003cbr\u003e- Rear:170\u003cbr\u003eRecommended Range to change Spring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: N\/A\u003cbr\u003eDamper Force (Rebound\/Damping):\u003cbr\u003e- Front: 814\/333\u003cbr\u003e- Rear: 304\/284\u003cbr\u003e- Note: Damping force is at piston speed 0.1m\/sec.\u003cbr\u003eDefault position of Dial:\u003cbr\u003e- Front: 15\u003cbr\u003e- Rear: 15\u003cbr\u003eDamping Force Adjustment:\u003cbr\u003e- Front: 30 Steps\u003cbr\u003e- Rear: 30 Steps\u003cbr\u003eHeight Adjustable Lower Bracket:\u003cbr\u003e- Front: Yes\u003cbr\u003e- Rear: Yes\u003cbr\u003eUpper Mount:\u003cbr\u003e- Front: Rubber Bush\u003cbr\u003e- Rear: OEM\u003cbr\u003eDamper Layout:\u003cbr\u003e- Front: Inverted\u003cbr\u003e- Rear: Normal\u003cbr\u003eDamper\/Spring Layout:\u003cbr\u003e- Front: Coilover\u003cbr\u003e- Rear: Separate\u003cbr\u003eDamping force adjustable with Wire:\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: Yes\u003cbr\u003eHelper Spring (Spring Rate N\/mm):\u003cbr\u003e- Front: 19.8\u003cbr\u003e- Rear: N\/A\u003cbr\u003eRide Height Specification -\u003cbr\u003e-Maximum Adjustable Range High - Low (mm):\u003cbr\u003e-- Front: ～ -67\u003cbr\u003e-- Rear: -6 ～ -47\u003cbr\u003e-Drivable Range High - Low (mm):\u003cbr\u003e-- Front: ～ -67\u003cbr\u003e-- Rear: -6 ～ -47\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- 6MT vehicles 03\/2007~ 08\/2010 only\u003cbr\u003e- Compatibility with Mugen RR unconfirmedThis set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV GT release this series has unified the many different street based Hipermax merits and further improved this new flagship series for the ultimate combination of driving performance and comfort performance, Driving Comfort. With exception of the circuit specific HIpermax IV SP series all other series will be replaced with this all-mighty spec. Specifically developed to provide the ultimate in harmony between performance handling and control with supreme ride comfort yet capable of high level performance on circuit as well. With massive adjustability in ride height and damper settings these items are an excellent choice for the daily driver to look and perform best under any kind of circumstance.\u003cbr\u003eDISCLAIMER:\u003cbr\u003e\u003cbr\u003eProduct picture is generic. Actual shape may differ.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eHonda - Civic Type-R - FD2 (2006-2008) K20A\u003cbr\u003eHonda - Civic Type-R - FD2 (2008-2010) K20A\u003c!--split--\u003e"}

{"id":6790924566710,"title":"HKS - Coilover Suspension Full Kit Hipermax S - Honda S2000 AP1\/AP2 (1999-2005)","handle":"hks-coilover-suspension-full-kit-hipermax-s-honda-s2000-ap1-ap2-1999-2005-80300-ah001","description":"SPECIFICATIONS:\u003cbr\u003eManufacturer: HKS\u003cbr\u003eAdjustability: Dampening and Height Adjustable\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eAP1\u003cbr\u003eSeries: Hipermax S\u003cbr\u003eSpring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: 98(10)\u003cbr\u003e- Rear: 98(10)\u003cbr\u003eFree Height (mm):\u003cbr\u003e- Front: 200\u003cbr\u003e- Rear: 170\u003cbr\u003eRecommended Range to change Spring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: ±20 ( 2 )\u003cbr\u003e- Rear: ±20 ( 2 )\u003cbr\u003eDamper Force (Rebound\/Damping):\u003cbr\u003e- Front: 1535\/407\u003cbr\u003e- Rear: 898\/329\u003cbr\u003e- Note: Damping force is at piston speed 0.1m\/sec.\u003cbr\u003eDefault position of Dial:\u003cbr\u003e- Front: 15\u003cbr\u003e- Rear: 15\u003cbr\u003eDamping Force Adjustment:\u003cbr\u003e- Front: 30 Steps\u003cbr\u003e- Rear: 30 Steps\u003cbr\u003eHeight Adjustable Lower Bracket:\u003cbr\u003e- Front: Yes\u003cbr\u003e- Rear: Yes\u003cbr\u003eUpper Mount:\u003cbr\u003e- Front: Rubber Bush\u003cbr\u003e- Rear: Rubber Bush\u003cbr\u003eDamper Layout:\u003cbr\u003e- Front: Normal\u003cbr\u003e- Rear: Normal\u003cbr\u003eDamper\/Spring Layout:\u003cbr\u003e- Front: Coilover\u003cbr\u003e- Rear: Coilover\u003cbr\u003eDamping force adjustable with Wire:\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: Yes\u003cbr\u003eHelper Spring (Spring Rate N\/mm):\u003cbr\u003e- Front: 19,8\u003cbr\u003e- Rear: 19,8\u003cbr\u003eRide Height Specification -\u003cbr\u003e-Maximum Adjustable Range High - Low (mm):\u003cbr\u003e-- Front: ～ -77\u003cbr\u003e-- Rear: ～ -53\u003cbr\u003e-Drivable Range High - Low (mm):\u003cbr\u003e-- Front: ～ -77\u003cbr\u003e-- Rear: ～ -53\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- AP1: Vehicles 01\/200~10\/2005 onlyThis set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV GT release this series has unified the many different street based Hipermax merits and further improved this new flagship series for the ultimate combination of driving performance and comfort performance, Driving Comfort. With exception of the circuit specific HIpermax IV SP series all other series will be replaced with this all-mighty spec. Specifically developed to provide the ultimate in harmony between performance handling and control with supreme ride comfort yet capable of high level performance on circuit as well. With massive adjustability in ride height and damper settings these items are an excellent choice for the daily driver to look and perform best under any kind of circumstance.\u003cbr\u003eDISCLAIMER:\u003cbr\u003e\u003cbr\u003eProduct picture is generic. Actual shape may differ.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eHonda - S2000 - AP1 (1999-2003) F20C\u003cbr\u003eHonda - S2000 - AP1 (2003-2005) F20C\u003cbr\u003eHonda - S2000 - AP1 (1999-2003) F20C\u003cbr\u003eHonda - S2000 - AP1 (2003-2005) F20C\u003c!--split--\u003e","published_at":"2021-06-15T16:39:44+08:00","created_at":"2021-06-15T16:39:45+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["1999","2000","2001","2002","2003","2004","2005","coilovers-and-springs","dampening-and-height-adjustable","hks","honda","jp1","s2000-ap1-1999-2003-na-f20c-i4","s2000-ap2-2003-2009-na-f22c-i4","ws126"],"price":207340,"price_min":207340,"price_max":207340,"available":true,"price_varies":false,"compare_at_price":238320,"compare_at_price_min":238320,"compare_at_price_max":238320,"compare_at_price_varies":false,"variants":[{"id":39940169072822,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80300-AH001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - Coilover Suspension Full Kit Hipermax S - Honda S2000 AP1\/AP2 (1999-2005)","public_title":null,"options":["Default Title"],"price":207340,"weight":45000,"compare_at_price":238320,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-honda-s2000-ap1ap2-1999-2005-rzcrew.jpg?v=1710324726"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-honda-s2000-ap1ap2-1999-2005-rzcrew.jpg?v=1710324726","options":["Title"],"media":[{"alt":"HKS - Coilover Suspension Full Kit Hipermax S - Honda S2000 AP1\/AP2 (1999-2005) - 80300-AH001 - Rzcrewgarage","id":22891682889910,"position":1,"preview_image":{"aspect_ratio":1.21,"height":496,"width":600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-honda-s2000-ap1ap2-1999-2005-rzcrew.jpg?v=1710324726"},"aspect_ratio":1.21,"height":496,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-honda-s2000-ap1ap2-1999-2005-rzcrew.jpg?v=1710324726","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS:\u003cbr\u003eManufacturer: HKS\u003cbr\u003eAdjustability: Dampening and Height Adjustable\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eAP1\u003cbr\u003eSeries: Hipermax S\u003cbr\u003eSpring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: 98(10)\u003cbr\u003e- Rear: 98(10)\u003cbr\u003eFree Height (mm):\u003cbr\u003e- Front: 200\u003cbr\u003e- Rear: 170\u003cbr\u003eRecommended Range to change Spring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: ±20 ( 2 )\u003cbr\u003e- Rear: ±20 ( 2 )\u003cbr\u003eDamper Force (Rebound\/Damping):\u003cbr\u003e- Front: 1535\/407\u003cbr\u003e- Rear: 898\/329\u003cbr\u003e- Note: Damping force is at piston speed 0.1m\/sec.\u003cbr\u003eDefault position of Dial:\u003cbr\u003e- Front: 15\u003cbr\u003e- Rear: 15\u003cbr\u003eDamping Force Adjustment:\u003cbr\u003e- Front: 30 Steps\u003cbr\u003e- Rear: 30 Steps\u003cbr\u003eHeight Adjustable Lower Bracket:\u003cbr\u003e- Front: Yes\u003cbr\u003e- Rear: Yes\u003cbr\u003eUpper Mount:\u003cbr\u003e- Front: Rubber Bush\u003cbr\u003e- Rear: Rubber Bush\u003cbr\u003eDamper Layout:\u003cbr\u003e- Front: Normal\u003cbr\u003e- Rear: Normal\u003cbr\u003eDamper\/Spring Layout:\u003cbr\u003e- Front: Coilover\u003cbr\u003e- Rear: Coilover\u003cbr\u003eDamping force adjustable with Wire:\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: Yes\u003cbr\u003eHelper Spring (Spring Rate N\/mm):\u003cbr\u003e- Front: 19,8\u003cbr\u003e- Rear: 19,8\u003cbr\u003eRide Height Specification -\u003cbr\u003e-Maximum Adjustable Range High - Low (mm):\u003cbr\u003e-- Front: ～ -77\u003cbr\u003e-- Rear: ～ -53\u003cbr\u003e-Drivable Range High - Low (mm):\u003cbr\u003e-- Front: ～ -77\u003cbr\u003e-- Rear: ～ -53\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- AP1: Vehicles 01\/200~10\/2005 onlyThis set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV GT release this series has unified the many different street based Hipermax merits and further improved this new flagship series for the ultimate combination of driving performance and comfort performance, Driving Comfort. With exception of the circuit specific HIpermax IV SP series all other series will be replaced with this all-mighty spec. Specifically developed to provide the ultimate in harmony between performance handling and control with supreme ride comfort yet capable of high level performance on circuit as well. With massive adjustability in ride height and damper settings these items are an excellent choice for the daily driver to look and perform best under any kind of circumstance.\u003cbr\u003eDISCLAIMER:\u003cbr\u003e\u003cbr\u003eProduct picture is generic. Actual shape may differ.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eHonda - S2000 - AP1 (1999-2003) F20C\u003cbr\u003eHonda - S2000 - AP1 (2003-2005) F20C\u003cbr\u003eHonda - S2000 - AP1 (1999-2003) F20C\u003cbr\u003eHonda - S2000 - AP1 (2003-2005) F20C\u003c!--split--\u003e"}

{"id":6767792292022,"title":"HKS - Racing Suction + Dry Carbone Intake Box - Honda - Civic Type R FK8","handle":"hks-racing-suction-dry-carbone-intake-box-honda-civic-type-r-fk8-70026-ah007","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 70026-AH007\u003cbr\u003eIntake Type: Airbox\u003cbr\u003e\u003cbr\u003eThis new Dry Carbon Intake Kit By HKS Features:\u003cbr\u003e\u003cbr\u003eCombination of carefully crafted carbon cold air intake box and high performance Racing Suction intake adds a premium touch to engine bay and significantly improves quality of air supply to the engine. Carbon intake box is an effective protection from hot air around the engine. Constant supply of fresh air during drive helps to decrease intake temperature.\u003cbr\u003e\u003cbr\u003eDry Carbon Cold Air Intake Box for exquisite and sporty look\u003cbr\u003ePolished Aluminum Piping to replace stock rubber hose and further improve air flow\u003cbr\u003eVarious separately available parts to select the desired combination\u003cbr\u003eAFR (Air\/Fuel ratio Regulator) corrects sensor readings and prevents CEL\u003cbr\u003ePlease note that a kit without AFR requires ECU recalibration.\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R | FK8 | 2017-2018 | TC | K20C1 | I4\u003c!--split--\u003e","published_at":"2021-06-07T13:28:04+08:00","created_at":"2021-06-07T13:28:06+08:00","vendor":"HKS","type":"Intake Kits","tags":["2017","2018","airbox","civic-type-r-fk8-2017-2018-tc-k20c1-i4","hks","honda","intake","intake-kits","jp1","ws14"],"price":150780,"price_min":150780,"price_max":150780,"available":true,"price_varies":false,"compare_at_price":147400,"compare_at_price_min":147400,"compare_at_price_max":147400,"compare_at_price_varies":false,"variants":[{"id":39886223737014,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"70026-AH007","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - Racing Suction + Dry Carbone Intake Box - Honda - Civic Type R FK8","public_title":null,"options":["Default Title"],"price":150780,"weight":12000,"compare_at_price":147400,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-racing-suction-dry-carbone-intake-box-honda-civic-type-r-fk8-rzcrew-1.jpg?v=1710325047","\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-racing-suction-dry-carbone-intake-box-honda-civic-type-r-fk8-rzcrew-2.jpg?v=1710325048"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-racing-suction-dry-carbone-intake-box-honda-civic-type-r-fk8-rzcrew-1.jpg?v=1710325047","options":["Title"],"media":[{"alt":"HKS - Racing Suction + Dry Carbone Intake Box - Honda - Civic Type R FK8 - 70026-AH007","id":25426863620278,"position":1,"preview_image":{"aspect_ratio":1.21,"height":496,"width":600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-racing-suction-dry-carbone-intake-box-honda-civic-type-r-fk8-rzcrew-1.jpg?v=1710325047"},"aspect_ratio":1.21,"height":496,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-racing-suction-dry-carbone-intake-box-honda-civic-type-r-fk8-rzcrew-1.jpg?v=1710325047","width":600},{"alt":"HKS - Racing Suction + Dry Carbone Intake Box - Honda - Civic Type R FK8 - [variant sku] - RZCrewGarage","id":25426863653046,"position":2,"preview_image":{"aspect_ratio":1.6,"height":750,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-racing-suction-dry-carbone-intake-box-honda-civic-type-r-fk8-rzcrew-2.jpg?v=1710325048"},"aspect_ratio":1.6,"height":750,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-racing-suction-dry-carbone-intake-box-honda-civic-type-r-fk8-rzcrew-2.jpg?v=1710325048","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 70026-AH007\u003cbr\u003eIntake Type: Airbox\u003cbr\u003e\u003cbr\u003eThis new Dry Carbon Intake Kit By HKS Features:\u003cbr\u003e\u003cbr\u003eCombination of carefully crafted carbon cold air intake box and high performance Racing Suction intake adds a premium touch to engine bay and significantly improves quality of air supply to the engine. Carbon intake box is an effective protection from hot air around the engine. Constant supply of fresh air during drive helps to decrease intake temperature.\u003cbr\u003e\u003cbr\u003eDry Carbon Cold Air Intake Box for exquisite and sporty look\u003cbr\u003ePolished Aluminum Piping to replace stock rubber hose and further improve air flow\u003cbr\u003eVarious separately available parts to select the desired combination\u003cbr\u003eAFR (Air\/Fuel ratio Regulator) corrects sensor readings and prevents CEL\u003cbr\u003ePlease note that a kit without AFR requires ECU recalibration.\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R | FK8 | 2017-2018 | TC | K20C1 | I4\u003c!--split--\u003e"}

{"id":6767792128182,"title":"HKS - Dry Carbon Racing Suction + Cold Air Intake Box - Suzuki - Swift Sport ZC33S","handle":"hks-dry-carbon-racing-suction-cold-air-intake-box-suzuki-swift-sport-zc33s-70026-as002","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 70026-AS002\u003cbr\u003eIntake Type: Airbox\u003cbr\u003e\u003cbr\u003eThis new Dry Carbon Intake Kit By HKS Features:\u003cbr\u003e\u003cbr\u003eThis cold air intake box uses 3K Weave Prepreg and it looks help to show reaching nature of the material.\u003cbr\u003eRacing suction and cold air intake can also be purchased separately.\u003cbr\u003eWe also support upgrades for those who have already installed racing suction.\u003cbr\u003eEfficiently takes in fresh air and reduces the rise in intake air temperature.\u003cbr\u003eThis kit produces a sporty intake sound like an open type intake.\n\n \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC33S | 2017-2018 | TC | K14C | I4\u003c!--split--\u003e","published_at":"2021-06-07T13:27:58+08:00","created_at":"2021-06-07T13:28:00+08:00","vendor":"HKS","type":"Intake Kits","tags":["2017","2018","airbox","hks","intake","intake-kits","jp1","suzuki","swift-sport-zc33s-2017-2018-tc-k14c-i4","ws14"],"price":132690,"price_min":132690,"price_max":132690,"available":true,"price_varies":false,"compare_at_price":129700,"compare_at_price_min":129700,"compare_at_price_max":129700,"compare_at_price_varies":false,"variants":[{"id":39886223573174,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"70026-AS002","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - Dry Carbon Racing Suction + Cold Air Intake Box - Suzuki - Swift Sport ZC33S","public_title":null,"options":["Default Title"],"price":132690,"weight":12000,"compare_at_price":129700,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-dry-carbon-racing-suction-cold-air-intake-box-suzuki-swift-sport-zc33s-rzcrew-1.jpg?v=1710325057","\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-dry-carbon-racing-suction-cold-air-intake-box-suzuki-swift-sport-zc33s-rzcrew-2.jpg?v=1710325059"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-dry-carbon-racing-suction-cold-air-intake-box-suzuki-swift-sport-zc33s-rzcrew-1.jpg?v=1710325057","options":["Title"],"media":[{"alt":"HKS - Dry Carbon Racing Suction + Cold Air Intake Box - Suzuki - Swift Sport ZC33S - 70026-AS002","id":25426863227062,"position":1,"preview_image":{"aspect_ratio":1.422,"height":450,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-dry-carbon-racing-suction-cold-air-intake-box-suzuki-swift-sport-zc33s-rzcrew-1.jpg?v=1710325057"},"aspect_ratio":1.422,"height":450,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-dry-carbon-racing-suction-cold-air-intake-box-suzuki-swift-sport-zc33s-rzcrew-1.jpg?v=1710325057","width":640},{"alt":"HKS - Dry Carbon Racing Suction + Cold Air Intake Box - Suzuki - Swift Sport ZC33S - [variant sku] - RZCrewGarage","id":25426863325366,"position":2,"preview_image":{"aspect_ratio":1.21,"height":529,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-dry-carbon-racing-suction-cold-air-intake-box-suzuki-swift-sport-zc33s-rzcrew-2.jpg?v=1710325059"},"aspect_ratio":1.21,"height":529,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-dry-carbon-racing-suction-cold-air-intake-box-suzuki-swift-sport-zc33s-rzcrew-2.jpg?v=1710325059","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 70026-AS002\u003cbr\u003eIntake Type: Airbox\u003cbr\u003e\u003cbr\u003eThis new Dry Carbon Intake Kit By HKS Features:\u003cbr\u003e\u003cbr\u003eThis cold air intake box uses 3K Weave Prepreg and it looks help to show reaching nature of the material.\u003cbr\u003eRacing suction and cold air intake can also be purchased separately.\u003cbr\u003eWe also support upgrades for those who have already installed racing suction.\u003cbr\u003eEfficiently takes in fresh air and reduces the rise in intake air temperature.\u003cbr\u003eThis kit produces a sporty intake sound like an open type intake.\n\n \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC33S | 2017-2018 | TC | K14C | I4\u003c!--split--\u003e"}

{"id":6767792521398,"title":"HKS Dry Carbon Racing Suction Kit - Toyota - Supra A90 RZ\/GR DB42","handle":"hks-dry-carbon-racing-suction-kit-toyota-supra-a90-rz-gr-db42-70028-at001","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 70028-AT001\u003cbr\u003eIntake Type: Short Ram Intake\u003cbr\u003e\u003cbr\u003eHigh-performance intake system with a carbon duct and case that best fits the engine room with advanced forming technology.\nBy using a carbon duct and case, it is lightweight, has high strength, and properly controls the intake air temperature.\nThe duct and case exclusively for each vehicle type efficiently take in the ram pressure and realize a sharp intake response.\nThe air cleaner body uses a reliable stainless steel mesh filter to achieve amazing inhalation efficiency and lacy sound.\nThe ability to use the stainless steel filter is semi-permanent because it can be used many times if washed.\nUse of carbon also contributes to dressing up the engine room.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSupra A90 GR | DB42 | 2019-2020 | TT | B58B30 | I6\u003cbr\u003eSupra A90 RZ | DB42 | 2019-2020 | TT | B58B30 | I6\u003c!--split--\u003e","published_at":"2021-06-07T13:28:11+08:00","created_at":"2021-06-07T13:28:14+08:00","vendor":"HKS","type":"Intake Kits","tags":["2019","2020","hks","intake","intake-kits","jp1","short-ram-intake","supra-a90-gr-db42-2019-2020-tt-b58b30-i6","supra-a90-rz-db42-2019-2020-tt-b58b30-i6","toyota","ws14"],"price":98510,"price_min":98510,"price_max":98510,"available":true,"price_varies":false,"compare_at_price":96300,"compare_at_price_min":96300,"compare_at_price_max":96300,"compare_at_price_varies":false,"variants":[{"id":39886223999158,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"70028-AT001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Dry Carbon Racing Suction Kit - Toyota - Supra A90 RZ\/GR DB42","public_title":null,"options":["Default Title"],"price":98510,"weight":8000,"compare_at_price":96300,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-dry-carbon-racing-suction-kit-toyota-supra-a90-rzgr-db42-rzcrew-1.jpg?v=1710325046","\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-dry-carbon-racing-suction-kit-toyota-supra-a90-rzgr-db42-rzcrew-2.jpg?v=1710325048","\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-dry-carbon-racing-suction-kit-toyota-supra-a90-rzgr-db42-rzcrew-3.jpg?v=1710325049"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-dry-carbon-racing-suction-kit-toyota-supra-a90-rzgr-db42-rzcrew-1.jpg?v=1710325046","options":["Title"],"media":[{"alt":"HKS Dry Carbon Racing Suction Kit - Toyota - Supra A90 RZ\/GR DB42 - 70028-AT001","id":25426864177334,"position":1,"preview_image":{"aspect_ratio":1.5,"height":1707,"width":2560,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-dry-carbon-racing-suction-kit-toyota-supra-a90-rzgr-db42-rzcrew-1.jpg?v=1710325046"},"aspect_ratio":1.5,"height":1707,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-dry-carbon-racing-suction-kit-toyota-supra-a90-rzgr-db42-rzcrew-1.jpg?v=1710325046","width":2560},{"alt":"HKS Dry Carbon Racing Suction Kit - Toyota - Supra A90 RZ\/GR DB42 - [variant sku] - RZCrewGarage","id":25426864210102,"position":2,"preview_image":{"aspect_ratio":1.613,"height":434,"width":700,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-dry-carbon-racing-suction-kit-toyota-supra-a90-rzgr-db42-rzcrew-2.jpg?v=1710325048"},"aspect_ratio":1.613,"height":434,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-dry-carbon-racing-suction-kit-toyota-supra-a90-rzgr-db42-rzcrew-2.jpg?v=1710325048","width":700},{"alt":"HKS Dry Carbon Racing Suction Kit - Toyota - Supra A90 RZ\/GR DB42 - [variant sku] - RZCrewGarage","id":25426864242870,"position":3,"preview_image":{"aspect_ratio":1.21,"height":529,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-dry-carbon-racing-suction-kit-toyota-supra-a90-rzgr-db42-rzcrew-3.jpg?v=1710325049"},"aspect_ratio":1.21,"height":529,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-dry-carbon-racing-suction-kit-toyota-supra-a90-rzgr-db42-rzcrew-3.jpg?v=1710325049","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 70028-AT001\u003cbr\u003eIntake Type: Short Ram Intake\u003cbr\u003e\u003cbr\u003eHigh-performance intake system with a carbon duct and case that best fits the engine room with advanced forming technology.\nBy using a carbon duct and case, it is lightweight, has high strength, and properly controls the intake air temperature.\nThe duct and case exclusively for each vehicle type efficiently take in the ram pressure and realize a sharp intake response.\nThe air cleaner body uses a reliable stainless steel mesh filter to achieve amazing inhalation efficiency and lacy sound.\nThe ability to use the stainless steel filter is semi-permanent because it can be used many times if washed.\nUse of carbon also contributes to dressing up the engine room.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSupra A90 GR | DB42 | 2019-2020 | TT | B58B30 | I6\u003cbr\u003eSupra A90 RZ | DB42 | 2019-2020 | TT | B58B30 | I6\u003c!--split--\u003e"}

{"id":6767792423094,"title":"HKS Dry Carbon Racing Suction + Cold Air Intake Box - Toyota - Supra A90 RZ\/GR DB42","handle":"hks-dry-carbon-racing-suction-cold-air-intake-box-toyota-supra-a90-rz-gr-db42-70026-at002","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 70026-AT002\u003cbr\u003eIntake Type: Airbox\u003cbr\u003e\u003cbr\u003eThis new Dry Carbon Intake Kit By HKS Features:\u003cbr\u003e\u003cbr\u003eProducing sporty and luxury atmosphere by employing the same carbon material with beautiful twill texture used at the Dry Carbon Racing Suction.\u003cbr\u003eAdding an extra air intake duct separately from the stock air intake port enhances the stable amount of intake air even though the open-type air cleaner was covered with the air intake cover.\u003cbr\u003eBy using HKS Cold Air Intake Full Kit provides Approx. 500g of weight-saving.\u003cbr\u003eA unique circular polished emblem (included in the kit) makes your engine room stylish.\u003cbr\u003eA cold air intake box can be purchased individually to upgrade your car for users who already have a Dry Carbon Racing Suction.\u003cbr\u003e\u003cbr\u003ePerformance Wise:\u003cbr\u003eAdjust the airflow by optimizing the piping of the Dry Carbon Racing Suction.\u003cbr\u003eFurther, adding the extra intake duct to the intake air box becomes possible sufficient fresh air intake.\u003cbr\u003eAs a result, HKS reduced the airflow resistance at the whole range compares to the stock intake system.\u003cbr\u003ePlacing the air filter in the cold air intake box can make smooth fresh air intake.\u003cbr\u003eIt can be reduced frequent rising air intake temperature after idling or in a traffic jam.\n\n \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSupra A90 GR | DB42 | 2019-2020 | TT | B58B30 | I6\u003cbr\u003eSupra A90 RZ | DB42 | 2019-2020 | TT | B58B30 | I6\u003c!--split--\u003e","published_at":"2021-06-07T13:28:06+08:00","created_at":"2021-06-07T13:28:10+08:00","vendor":"HKS","type":"Intake Kits","tags":["2019","2020","airbox","hks","intake","intake-kits","jp1","supra-a90-gr-db42-2019-2020-tt-b58b30-i6","supra-a90-rz-db42-2019-2020-tt-b58b30-i6","toyota","ws14"],"price":180940,"price_min":180940,"price_max":180940,"available":true,"price_varies":false,"compare_at_price":176900,"compare_at_price_min":176900,"compare_at_price_max":176900,"compare_at_price_varies":false,"variants":[{"id":39886223868086,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"70026-AT002","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Dry Carbon Racing Suction + Cold Air Intake Box - Toyota - Supra A90 RZ\/GR DB42","public_title":null,"options":["Default Title"],"price":180940,"weight":19000,"compare_at_price":176900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-dry-carbon-racing-suction-cold-air-intake-box-toyota-supra-a90-rzgr-db42-rzcrew-1.jpg?v=1710325046","\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-dry-carbon-racing-suction-cold-air-intake-box-toyota-supra-a90-rzgr-db42-rzcrew-2.jpg?v=1710325048","\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-dry-carbon-racing-suction-cold-air-intake-box-toyota-supra-a90-rzgr-db42-rzcrew-3.jpg?v=1710325049"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-dry-carbon-racing-suction-cold-air-intake-box-toyota-supra-a90-rzgr-db42-rzcrew-1.jpg?v=1710325046","options":["Title"],"media":[{"alt":"HKS Dry Carbon Racing Suction + Cold Air Intake Box - Toyota - Supra A90 RZ\/GR DB42 - 70026-AT002","id":25426864079030,"position":1,"preview_image":{"aspect_ratio":1.501,"height":1066,"width":1600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-dry-carbon-racing-suction-cold-air-intake-box-toyota-supra-a90-rzgr-db42-rzcrew-1.jpg?v=1710325046"},"aspect_ratio":1.501,"height":1066,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-dry-carbon-racing-suction-cold-air-intake-box-toyota-supra-a90-rzgr-db42-rzcrew-1.jpg?v=1710325046","width":1600},{"alt":"HKS Dry Carbon Racing Suction + Cold Air Intake Box - Toyota - Supra A90 RZ\/GR DB42 - [variant sku] - RZCrewGarage","id":25426864111798,"position":2,"preview_image":{"aspect_ratio":1.0,"height":900,"width":900,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-dry-carbon-racing-suction-cold-air-intake-box-toyota-supra-a90-rzgr-db42-rzcrew-2.jpg?v=1710325048"},"aspect_ratio":1.0,"height":900,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-dry-carbon-racing-suction-cold-air-intake-box-toyota-supra-a90-rzgr-db42-rzcrew-2.jpg?v=1710325048","width":900},{"alt":"HKS Dry Carbon Racing Suction + Cold Air Intake Box - Toyota - Supra A90 RZ\/GR DB42 - [variant sku] - RZCrewGarage","id":25426864144566,"position":3,"preview_image":{"aspect_ratio":1.0,"height":640,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-dry-carbon-racing-suction-cold-air-intake-box-toyota-supra-a90-rzgr-db42-rzcrew-3.jpg?v=1710325049"},"aspect_ratio":1.0,"height":640,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-dry-carbon-racing-suction-cold-air-intake-box-toyota-supra-a90-rzgr-db42-rzcrew-3.jpg?v=1710325049","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 70026-AT002\u003cbr\u003eIntake Type: Airbox\u003cbr\u003e\u003cbr\u003eThis new Dry Carbon Intake Kit By HKS Features:\u003cbr\u003e\u003cbr\u003eProducing sporty and luxury atmosphere by employing the same carbon material with beautiful twill texture used at the Dry Carbon Racing Suction.\u003cbr\u003eAdding an extra air intake duct separately from the stock air intake port enhances the stable amount of intake air even though the open-type air cleaner was covered with the air intake cover.\u003cbr\u003eBy using HKS Cold Air Intake Full Kit provides Approx. 500g of weight-saving.\u003cbr\u003eA unique circular polished emblem (included in the kit) makes your engine room stylish.\u003cbr\u003eA cold air intake box can be purchased individually to upgrade your car for users who already have a Dry Carbon Racing Suction.\u003cbr\u003e\u003cbr\u003ePerformance Wise:\u003cbr\u003eAdjust the airflow by optimizing the piping of the Dry Carbon Racing Suction.\u003cbr\u003eFurther, adding the extra intake duct to the intake air box becomes possible sufficient fresh air intake.\u003cbr\u003eAs a result, HKS reduced the airflow resistance at the whole range compares to the stock intake system.\u003cbr\u003ePlacing the air filter in the cold air intake box can make smooth fresh air intake.\u003cbr\u003eIt can be reduced frequent rising air intake temperature after idling or in a traffic jam.\n\n \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSupra A90 GR | DB42 | 2019-2020 | TT | B58B30 | I6\u003cbr\u003eSupra A90 RZ | DB42 | 2019-2020 | TT | B58B30 | I6\u003c!--split--\u003e"}

{"id":6767792226486,"title":"HKS - Racing Suction + Dry Carbone Intake Box + AFR - Honda - Civic Type R FK8","handle":"hks-racing-suction-dry-carbone-intake-box-afr-honda-civic-type-r-fk8-70026-ah006","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 70026-AH006\u003cbr\u003eIntake Type: Airbox\u003cbr\u003e\u003cbr\u003eThis new Dry Carbon Intake Kit By HKS Features:\u003cbr\u003e\u003cbr\u003eCombination of carefully crafted carbon cold air intake box and high performance Racing Suction intake adds a premium touch to engine bay and significantly improves quality of air supply to the engine. Carbon intake box is an effective protection from hot air around the engine. Constant supply of fresh air during drive helps to decrease intake temperature.\u003cbr\u003e\u003cbr\u003eDry Carbon Cold Air Intake Box for exquisite and sporty look\u003cbr\u003ePolished Aluminum Piping to replace stock rubber hose and further improve air flow\u003cbr\u003eVarious separately available parts to select the desired combination\u003cbr\u003eAFR (Air\/Fuel ratio Regulator) corrects sensor readings and prevents CEL\u003cbr\u003ePlease note that this kit with AFR does not require ECU recalibration.\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R | FK8 | 2017-2018 | TC | K20C1 | I4\u003c!--split--\u003e","published_at":"2021-06-07T13:28:00+08:00","created_at":"2021-06-07T13:28:03+08:00","vendor":"HKS","type":"Intake Kits","tags":["2017","2018","airbox","civic-type-r-fk8-2017-2018-tc-k20c1-i4","hks","honda","intake","intake-kits","jp1","ws14"],"price":180940,"price_min":180940,"price_max":180940,"available":true,"price_varies":false,"compare_at_price":176900,"compare_at_price_min":176900,"compare_at_price_max":176900,"compare_at_price_varies":false,"variants":[{"id":39886223671478,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"70026-AH006","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - Racing Suction + Dry Carbone Intake Box + AFR - Honda - Civic Type R FK8","public_title":null,"options":["Default Title"],"price":180940,"weight":12000,"compare_at_price":176900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-racing-suction-dry-carbone-intake-box-afr-honda-civic-type-r-fk8-rzcrew-1.jpg?v=1710325058","\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-racing-suction-dry-carbone-intake-box-afr-honda-civic-type-r-fk8-rzcrew-2.jpg?v=1710325059","\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-racing-suction-dry-carbone-intake-box-afr-honda-civic-type-r-fk8-rzcrew-3.jpg?v=1710325060"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-racing-suction-dry-carbone-intake-box-afr-honda-civic-type-r-fk8-rzcrew-1.jpg?v=1710325058","options":["Title"],"media":[{"alt":"HKS - Racing Suction + Dry Carbone Intake Box + AFR - Honda - Civic Type R FK8 - 70026-AH006","id":25426863489206,"position":1,"preview_image":{"aspect_ratio":1.21,"height":496,"width":600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-racing-suction-dry-carbone-intake-box-afr-honda-civic-type-r-fk8-rzcrew-1.jpg?v=1710325058"},"aspect_ratio":1.21,"height":496,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-racing-suction-dry-carbone-intake-box-afr-honda-civic-type-r-fk8-rzcrew-1.jpg?v=1710325058","width":600},{"alt":"HKS - Racing Suction + Dry Carbone Intake Box + AFR - Honda - Civic Type R FK8 - [variant sku] - RZCrewGarage","id":25426863521974,"position":2,"preview_image":{"aspect_ratio":1.6,"height":750,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-racing-suction-dry-carbone-intake-box-afr-honda-civic-type-r-fk8-rzcrew-2.jpg?v=1710325059"},"aspect_ratio":1.6,"height":750,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-racing-suction-dry-carbone-intake-box-afr-honda-civic-type-r-fk8-rzcrew-2.jpg?v=1710325059","width":1200},{"alt":"HKS - Racing Suction + Dry Carbone Intake Box + AFR - Honda - Civic Type R FK8 - [variant sku] - RZCrewGarage","id":25426863554742,"position":3,"preview_image":{"aspect_ratio":1.083,"height":240,"width":260,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-racing-suction-dry-carbone-intake-box-afr-honda-civic-type-r-fk8-rzcrew-3.jpg?v=1710325060"},"aspect_ratio":1.083,"height":240,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-racing-suction-dry-carbone-intake-box-afr-honda-civic-type-r-fk8-rzcrew-3.jpg?v=1710325060","width":260}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 70026-AH006\u003cbr\u003eIntake Type: Airbox\u003cbr\u003e\u003cbr\u003eThis new Dry Carbon Intake Kit By HKS Features:\u003cbr\u003e\u003cbr\u003eCombination of carefully crafted carbon cold air intake box and high performance Racing Suction intake adds a premium touch to engine bay and significantly improves quality of air supply to the engine. Carbon intake box is an effective protection from hot air around the engine. Constant supply of fresh air during drive helps to decrease intake temperature.\u003cbr\u003e\u003cbr\u003eDry Carbon Cold Air Intake Box for exquisite and sporty look\u003cbr\u003ePolished Aluminum Piping to replace stock rubber hose and further improve air flow\u003cbr\u003eVarious separately available parts to select the desired combination\u003cbr\u003eAFR (Air\/Fuel ratio Regulator) corrects sensor readings and prevents CEL\u003cbr\u003ePlease note that this kit with AFR does not require ECU recalibration.\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic Type R | FK8 | 2017-2018 | TC | K20C1 | I4\u003c!--split--\u003e"}

{"id":6746453311670,"title":"HKS x Tone Tool Set - Toyota GR Supra","handle":"hks-x-tone-tool-set-toyota-gr-supra","description":"HKS x Tone Tool Set - Toyota GR Supra\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003e\nManufacturer: Tone\u003cbr\u003e\nCase Size (mm):\u003cbr\u003e\n-Width: 400\u003cbr\u003e\n-Height: 209\u003cbr\u003e\u003cbr\u003e\n\nPRODUCT NOTES:\u003cbr\u003e\nMade In Japan\u003cbr\u003e\nSpecial Tools Include:\u003cbr\u003e\n-Jack pad: For protecting the resin jack point\u003cbr\u003e\n-Dummy bolt: To keep bolts in place when attaching\/removing a wheel. (Wheels are attached by bolts)\u003cbr\u003e\n-Knuckle spreader: To enlarge the openings of lower knuckle at the front suspension\u003cbr\u003e\u003cbr\u003e\nGeneral Purpose Tools Include:\u003cbr\u003e\n-Ratchet handle, extension bar (long and short), spinner handle, socket adaptor (3\/8 ? 1\/2)\u003cbr\u003e\n-Hexagonal sockets (mm):\u003cbr\u003e\n6\u003cbr\u003e\n8\u003cbr\u003e\n10\u003cbr\u003e\n12\u003cbr\u003e\n13\u003cbr\u003e\n14\u003cbr\u003e\n16\u003cbr\u003e\n18\u003cbr\u003e\n21\u003cbr\u003e\u003cbr\u003e\n-E-shaped torque sockets:?\u003cbr\u003e\nE8\u003cbr\u003e\nE10\u003cbr\u003e\nE12\u003cbr\u003e\nE14\u003cbr\u003e\nE20\u003cbr\u003e\u003cbr\u003e\n-T-shaped torque sockets:?\u003cbr\u003e\nT15\u003cbr\u003e\nT20\u003cbr\u003e\nT25\u003cbr\u003e\nT30\u003cbr\u003e\nT50\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2021-05-28T16:52:06+08:00","created_at":"2021-05-28T16:52:10+08:00","vendor":"HKS","type":"Merchandise","tags":["civic-fd2-2007-2010-na-k20z2-i4","hks","jp1","merchandise","tools","Universal","ws14"],"price":67600,"price_min":67600,"price_max":67600,"available":true,"price_varies":false,"compare_at_price":67600,"compare_at_price_min":67600,"compare_at_price_max":67600,"compare_at_price_varies":false,"variants":[{"id":39828414824630,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"82005-AT001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS x Tone Tool Set - Toyota GR Supra","public_title":null,"options":["Default Title"],"price":67600,"weight":8000,"compare_at_price":67600,"inventory_quantity":41,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-x-tone-tool-set-toyota-gr-supra-rzcrew-1.jpg?v=1710325127","\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-x-tone-tool-set-toyota-gr-supra-rzcrew-2.png?v=1710325129","\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-x-tone-tool-set-toyota-gr-supra-rzcrew-3.png?v=1710325130","\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-x-tone-tool-set-toyota-gr-supra-rzcrew-4.jpg?v=1710325131"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-x-tone-tool-set-toyota-gr-supra-rzcrew-1.jpg?v=1710325127","options":["Title"],"media":[{"alt":"hks-x-tone-tool-set-toyota-gr-supra - Rzcrewgarage","id":25427618627766,"position":1,"preview_image":{"aspect_ratio":1.381,"height":507,"width":700,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-x-tone-tool-set-toyota-gr-supra-rzcrew-1.jpg?v=1710325127"},"aspect_ratio":1.381,"height":507,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-x-tone-tool-set-toyota-gr-supra-rzcrew-1.jpg?v=1710325127","width":700},{"alt":"HKS x Tone Tool Set - Toyota GR Supra - [variant sku] - RZCrewGarage","id":25427618660534,"position":2,"preview_image":{"aspect_ratio":1.755,"height":273,"width":479,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-x-tone-tool-set-toyota-gr-supra-rzcrew-2.png?v=1710325129"},"aspect_ratio":1.755,"height":273,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-x-tone-tool-set-toyota-gr-supra-rzcrew-2.png?v=1710325129","width":479},{"alt":"HKS x Tone Tool Set - Toyota GR Supra - [variant sku] - RZCrewGarage","id":25427618726070,"position":3,"preview_image":{"aspect_ratio":2.048,"height":310,"width":635,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-x-tone-tool-set-toyota-gr-supra-rzcrew-3.png?v=1710325130"},"aspect_ratio":2.048,"height":310,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-x-tone-tool-set-toyota-gr-supra-rzcrew-3.png?v=1710325130","width":635},{"alt":"HKS x Tone Tool Set - Toyota GR Supra - [variant sku] - RZCrewGarage","id":25427618758838,"position":4,"preview_image":{"aspect_ratio":0.706,"height":1080,"width":763,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-x-tone-tool-set-toyota-gr-supra-rzcrew-4.jpg?v=1710325131"},"aspect_ratio":0.706,"height":1080,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-x-tone-tool-set-toyota-gr-supra-rzcrew-4.jpg?v=1710325131","width":763}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"HKS x Tone Tool Set - Toyota GR Supra\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003e\nManufacturer: Tone\u003cbr\u003e\nCase Size (mm):\u003cbr\u003e\n-Width: 400\u003cbr\u003e\n-Height: 209\u003cbr\u003e\u003cbr\u003e\n\nPRODUCT NOTES:\u003cbr\u003e\nMade In Japan\u003cbr\u003e\nSpecial Tools Include:\u003cbr\u003e\n-Jack pad: For protecting the resin jack point\u003cbr\u003e\n-Dummy bolt: To keep bolts in place when attaching\/removing a wheel. (Wheels are attached by bolts)\u003cbr\u003e\n-Knuckle spreader: To enlarge the openings of lower knuckle at the front suspension\u003cbr\u003e\u003cbr\u003e\nGeneral Purpose Tools Include:\u003cbr\u003e\n-Ratchet handle, extension bar (long and short), spinner handle, socket adaptor (3\/8 ? 1\/2)\u003cbr\u003e\n-Hexagonal sockets (mm):\u003cbr\u003e\n6\u003cbr\u003e\n8\u003cbr\u003e\n10\u003cbr\u003e\n12\u003cbr\u003e\n13\u003cbr\u003e\n14\u003cbr\u003e\n16\u003cbr\u003e\n18\u003cbr\u003e\n21\u003cbr\u003e\u003cbr\u003e\n-E-shaped torque sockets:?\u003cbr\u003e\nE8\u003cbr\u003e\nE10\u003cbr\u003e\nE12\u003cbr\u003e\nE14\u003cbr\u003e\nE20\u003cbr\u003e\u003cbr\u003e\n-T-shaped torque sockets:?\u003cbr\u003e\nT15\u003cbr\u003e\nT20\u003cbr\u003e\nT25\u003cbr\u003e\nT30\u003cbr\u003e\nT50\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003e"}

{"id":6572369543350,"title":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution X CZ4A (2007-2017)","handle":"hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-x-cz4a-2007-2017-71008-am015","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution X - CZ4A (2007-2008) 4B11\u003cbr\u003eMitsubishi - Lancer Evolution X - CZ4A (2008-2009) 4B11\u003cbr\u003eMitsubishi - Lancer Evolution X - CZ4A (2009-2017) 4B11\u003c!--split--\u003e","published_at":"2021-03-12T11:17:11+08:00","created_at":"2021-03-12T11:17:11+08:00","vendor":"Hks","type":"Universal Blow Off Valves","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","forced-induction","hks","jp1","lancer-evolution-x-cz4a-chuki-rs-jdmgsr-2008-2009-tc-4b11-i4","lancer-evolution-x-cz4a-kouki-rs-jdmgsr-2009-2017-tc-4b11-i4","lancer-evolution-x-cz4a-zenki-rs-jdmgsr-2007-2008-tc-4b11-i4","mitsubishi","universal-blow-off-valves","ws122"],"price":31550,"price_min":31550,"price_max":31550,"available":true,"price_varies":false,"compare_at_price":37900,"compare_at_price_min":37900,"compare_at_price_max":37900,"compare_at_price_varies":false,"variants":[{"id":39347323601078,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"71008-AM015","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution X CZ4A (2007-2017)","public_title":null,"options":["Default Title"],"price":31550,"weight":3000,"compare_at_price":37900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-x-cz4a-2007-2017-rzcrew.jpg?v=1710326215"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-x-cz4a-2007-2017-rzcrew.jpg?v=1710326215","options":["Title"],"media":[{"alt":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution X CZ4A (2007-2017) - 71008-AM015 - Rzcrewgarage","id":22330850574518,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-x-cz4a-2007-2017-rzcrew.jpg?v=1710326215"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-x-cz4a-2007-2017-rzcrew.jpg?v=1710326215","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution X - CZ4A (2007-2008) 4B11\u003cbr\u003eMitsubishi - Lancer Evolution X - CZ4A (2008-2009) 4B11\u003cbr\u003eMitsubishi - Lancer Evolution X - CZ4A (2009-2017) 4B11\u003c!--split--\u003e"}

{"id":6572369477814,"title":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution VIII CT9A (2003-2005)","handle":"hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-viii-ct9a-2003-2005-71008-am011","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- Not compatible with GT-A models\u003cbr\u003e- Not be used with piping kit\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution VIII - CT9A (2003-2005) 4G63\u003c!--split--\u003e","published_at":"2021-03-12T11:17:08+08:00","created_at":"2021-03-12T11:17:09+08:00","vendor":"Hks","type":"Universal Blow Off Valves","tags":["2003","2004","2005","forced-induction","hks","jp1","lancer-evolution-viii-ct9a-2003-2005-tc-4g63t-mivec-i4","mitsubishi","universal-blow-off-valves","ws122"],"price":27480,"price_min":27480,"price_max":27480,"available":true,"price_varies":false,"compare_at_price":33000,"compare_at_price_min":33000,"compare_at_price_max":33000,"compare_at_price_varies":false,"variants":[{"id":39347323535542,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"71008-AM011","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution VIII CT9A (2003-2005)","public_title":null,"options":["Default Title"],"price":27480,"weight":3000,"compare_at_price":33000,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-viii-ct9a-2003-2005-rzcrew.jpg?v=1710326215"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-viii-ct9a-2003-2005-rzcrew.jpg?v=1710326215","options":["Title"],"media":[{"alt":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution VIII CT9A (2003-2005) - 71008-AM011 - Rzcrewgarage","id":22330848936118,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-viii-ct9a-2003-2005-rzcrew.jpg?v=1710326215"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-viii-ct9a-2003-2005-rzcrew.jpg?v=1710326215","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- Not compatible with GT-A models\u003cbr\u003e- Not be used with piping kit\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution VIII - CT9A (2003-2005) 4G63\u003c!--split--\u003e"}

{"id":6572369510582,"title":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution Wagon CT9W (2003-2006)","handle":"hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-wagon-ct9w-2003-2006-71008-am011","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- Not compatible with GT-A models\u003cbr\u003e- Not be used with piping kit\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution Wagon - CT9W (2003-2006) 4G63\u003c!--split--\u003e","published_at":"2021-03-12T11:17:09+08:00","created_at":"2021-03-12T11:17:10+08:00","vendor":"Hks","type":"Universal Blow Off Valves","tags":["2003","2004","2005","2006","forced-induction","hks","jp1","lancer-evolution-wagon-ct9w-2003-2006-tc-4g63t-mivec-i4","mitsubishi","universal-blow-off-valves","ws122"],"price":27480,"price_min":27480,"price_max":27480,"available":true,"price_varies":false,"compare_at_price":33000,"compare_at_price_min":33000,"compare_at_price_max":33000,"compare_at_price_varies":false,"variants":[{"id":39347323568310,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"71008-AM011","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution Wagon CT9W (2003-2006)","public_title":null,"options":["Default Title"],"price":27480,"weight":3000,"compare_at_price":33000,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-wagon-ct9w-2003-2006-rzcrew.jpg?v=1710326215"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-wagon-ct9w-2003-2006-rzcrew.jpg?v=1710326215","options":["Title"],"media":[{"alt":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution Wagon CT9W (2003-2006) - 71008-AM011 - Rzcrewgarage","id":22330849001654,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-wagon-ct9w-2003-2006-rzcrew.jpg?v=1710326215"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-wagon-ct9w-2003-2006-rzcrew.jpg?v=1710326215","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- Not compatible with GT-A models\u003cbr\u003e- Not be used with piping kit\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution Wagon - CT9W (2003-2006) 4G63\u003c!--split--\u003e"}

{"id":6572369379510,"title":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution VI CP9A (1999-1999)","handle":"hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-vi-cp9a-1999-1999-71008-am006","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution VI - CP9A (1999-1999) 4G63\u003c!--split--\u003e","published_at":"2021-03-12T11:17:05+08:00","created_at":"2021-03-12T11:17:05+08:00","vendor":"Hks","type":"Universal Blow Off Valves","tags":["1999","forced-induction","hks","jp1","lancer-evolution-vi-cp9a-1999-2001-tc-4g63t-2nd-gen-i4","mitsubishi","universal-blow-off-valves","ws122"],"price":24230,"price_min":24230,"price_max":24230,"available":true,"price_varies":false,"compare_at_price":29100,"compare_at_price_min":29100,"compare_at_price_max":29100,"compare_at_price_varies":false,"variants":[{"id":39347321602230,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"71008-AM006","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution VI CP9A (1999-1999)","public_title":null,"options":["Default Title"],"price":24230,"weight":3000,"compare_at_price":29100,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-vi-cp9a-1999-1999-rzcrew.jpg?v=1710326216"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-vi-cp9a-1999-1999-rzcrew.jpg?v=1710326216","options":["Title"],"media":[{"alt":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution VI CP9A (1999-1999) - 71008-AM006 - Rzcrewgarage","id":22330848313526,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-vi-cp9a-1999-1999-rzcrew.jpg?v=1710326216"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-vi-cp9a-1999-1999-rzcrew.jpg?v=1710326216","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution VI - CP9A (1999-1999) 4G63\u003c!--split--\u003e"}

{"id":6572369445046,"title":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution VII CT9A (2001-2002)","handle":"hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-vii-ct9a-2001-2002-71008-am011","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- Not compatible with GT-A models\u003cbr\u003e- Not be used with piping kit\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution VII - CT9A (2001-2002) 4G63\u003c!--split--\u003e","published_at":"2021-03-12T11:17:07+08:00","created_at":"2021-03-12T11:17:08+08:00","vendor":"Hks","type":"Universal Blow Off Valves","tags":["2001","2002","forced-induction","hks","jp1","lancer-evolution-vii-ct9a-2001-2002-tc-4g63t-3rd-gen-i4","mitsubishi","universal-blow-off-valves","ws122"],"price":27480,"price_min":27480,"price_max":27480,"available":true,"price_varies":false,"compare_at_price":33000,"compare_at_price_min":33000,"compare_at_price_max":33000,"compare_at_price_varies":false,"variants":[{"id":39347323470006,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"71008-AM011","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution VII CT9A (2001-2002)","public_title":null,"options":["Default Title"],"price":27480,"weight":3000,"compare_at_price":33000,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-vii-ct9a-2001-2002-rzcrew.jpg?v=1710326215"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-vii-ct9a-2001-2002-rzcrew.jpg?v=1710326215","options":["Title"],"media":[{"alt":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution VII CT9A (2001-2002) - 71008-AM011 - Rzcrewgarage","id":22330848805046,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-vii-ct9a-2001-2002-rzcrew.jpg?v=1710326215"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-vii-ct9a-2001-2002-rzcrew.jpg?v=1710326215","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- Not compatible with GT-A models\u003cbr\u003e- Not be used with piping kit\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution VII - CT9A (2001-2002) 4G63\u003c!--split--\u003e"}

{"id":6572369215670,"title":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Galant Fortis SportBack CX4A (2008-2015)","handle":"hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-galant-fortis-sportback-cx4a-2008-2015-71008-am016","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Galant Fortis SportBack - CX4A (2008-2009) 4B11\u003cbr\u003eMitsubishi - Galant Fortis SportBack - CX4A (2009-2015) 4B11\u003c!--split--\u003e","published_at":"2021-03-12T11:17:01+08:00","created_at":"2021-03-12T11:17:02+08:00","vendor":"Hks","type":"Universal Blow Off Valves","tags":["2008","2009","2010","2011","2012","2013","2014","2015","forced-induction","galant-fortis-sportback-cx4a2wd-2009-2015-na-4b11-i4","galant-fortis-sportback-cx4a4wd-2008-2015-na-4b11-i4","hks","jp1","mitsubishi","universal-blow-off-valves","ws122"],"price":31550,"price_min":31550,"price_max":31550,"available":true,"price_varies":false,"compare_at_price":37900,"compare_at_price_min":37900,"compare_at_price_max":37900,"compare_at_price_varies":false,"variants":[{"id":39347321340086,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"71008-AM016","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Galant Fortis SportBack CX4A (2008-2015)","public_title":null,"options":["Default Title"],"price":31550,"weight":3000,"compare_at_price":37900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-galant-fortis-sportback-cx4a-2008-2015-rzcrew.jpg?v=1710326216"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-galant-fortis-sportback-cx4a-2008-2015-rzcrew.jpg?v=1710326216","options":["Title"],"media":[{"alt":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Galant Fortis SportBack CX4A (2008-2015) - 71008-AM016 - Rzcrewgarage","id":22330847232182,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-galant-fortis-sportback-cx4a-2008-2015-rzcrew.jpg?v=1710326216"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-galant-fortis-sportback-cx4a-2008-2015-rzcrew.jpg?v=1710326216","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Galant Fortis SportBack - CX4A (2008-2009) 4B11\u003cbr\u003eMitsubishi - Galant Fortis SportBack - CX4A (2009-2015) 4B11\u003c!--split--\u003e"}

{"id":6572369313974,"title":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution V CP9A (1998-1998)","handle":"hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-v-cp9a-1998-1998-71008-am006","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution V - CP9A (1998-1998) 4G63\u003c!--split--\u003e","published_at":"2021-03-12T11:17:03+08:00","created_at":"2021-03-12T11:17:04+08:00","vendor":"Hks","type":"Universal Blow Off Valves","tags":["1998","forced-induction","hks","jp1","lancer-evolution-v-cp9a-1998-1999-tc-4g63t-2nd-gen-i4","mitsubishi","universal-blow-off-valves","ws122"],"price":24230,"price_min":24230,"price_max":24230,"available":true,"price_varies":false,"compare_at_price":29100,"compare_at_price_min":29100,"compare_at_price_max":29100,"compare_at_price_varies":false,"variants":[{"id":39347321405622,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"71008-AM006","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution V CP9A (1998-1998)","public_title":null,"options":["Default Title"],"price":24230,"weight":3000,"compare_at_price":29100,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-v-cp9a-1998-1998-rzcrew.jpg?v=1710326216"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-v-cp9a-1998-1998-rzcrew.jpg?v=1710326216","options":["Title"],"media":[{"alt":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution V CP9A (1998-1998) - 71008-AM006 - Rzcrewgarage","id":22330848247990,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-v-cp9a-1998-1998-rzcrew.jpg?v=1710326216"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-v-cp9a-1998-1998-rzcrew.jpg?v=1710326216","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution V - CP9A (1998-1998) 4G63\u003c!--split--\u003e"}

{"id":6572369248438,"title":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution IV CN9A (1996-1997)","handle":"hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-iv-cn9a-1996-1997-71008-am006","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution IV - CN9A (1996-1997) 4G63\u003c!--split--\u003e","published_at":"2021-03-12T11:17:02+08:00","created_at":"2021-03-12T11:17:03+08:00","vendor":"Hks","type":"Universal Blow Off Valves","tags":["1996","1997","forced-induction","hks","jp1","lancer-evolution-iv-cn9a-1996-1997-tc-4g63t-2nd-gen-i4","mitsubishi","universal-blow-off-valves","ws122"],"price":24230,"price_min":24230,"price_max":24230,"available":true,"price_varies":false,"compare_at_price":29100,"compare_at_price_min":29100,"compare_at_price_max":29100,"compare_at_price_varies":false,"variants":[{"id":39347321372854,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"71008-AM006","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution IV CN9A (1996-1997)","public_title":null,"options":["Default Title"],"price":24230,"weight":3000,"compare_at_price":29100,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-iv-cn9a-1996-1997-rzcrew.jpg?v=1710326216"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-iv-cn9a-1996-1997-rzcrew.jpg?v=1710326216","options":["Title"],"media":[{"alt":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution IV CN9A (1996-1997) - 71008-AM006 - Rzcrewgarage","id":22330847953078,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-iv-cn9a-1996-1997-rzcrew.jpg?v=1710326216"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-iv-cn9a-1996-1997-rzcrew.jpg?v=1710326216","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution IV - CN9A (1996-1997) 4G63\u003c!--split--\u003e"}

{"id":6572369117366,"title":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Galant Fortis CY4A (2007-2018)","handle":"hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-galant-fortis-cy4a-2007-2018-71008-am016","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Galant Fortis - CY4A (2007-2009) 4B11\u003cbr\u003eMitsubishi - Galant Fortis - CY4A (2009-2018) 4B11\u003c!--split--\u003e","published_at":"2021-03-12T11:16:53+08:00","created_at":"2021-03-12T11:16:54+08:00","vendor":"Hks","type":"Universal Blow Off Valves","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","forced-induction","galant-fortis-cy4a-2007-2009-na-4b11-i4","galant-fortis-cy4a-2009-2018-na-4b11-i4","hks","jp1","mitsubishi","universal-blow-off-valves","ws122"],"price":31550,"price_min":31550,"price_max":31550,"available":true,"price_varies":false,"compare_at_price":37900,"compare_at_price_min":37900,"compare_at_price_max":37900,"compare_at_price_varies":false,"variants":[{"id":39347321307318,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"71008-AM016","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Galant Fortis CY4A (2007-2018)","public_title":null,"options":["Default Title"],"price":31550,"weight":3000,"compare_at_price":37900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-galant-fortis-cy4a-2007-2018-rzcrew.jpg?v=1710326216"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-galant-fortis-cy4a-2007-2018-rzcrew.jpg?v=1710326216","options":["Title"],"media":[{"alt":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Galant Fortis CY4A (2007-2018) - 71008-AM016 - Rzcrewgarage","id":22330846937270,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-galant-fortis-cy4a-2007-2018-rzcrew.jpg?v=1710326216"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-galant-fortis-cy4a-2007-2018-rzcrew.jpg?v=1710326216","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Galant Fortis - CY4A (2007-2009) 4B11\u003cbr\u003eMitsubishi - Galant Fortis - CY4A (2009-2018) 4B11\u003c!--split--\u003e"}

{"id":6572369084598,"title":"HKS Super SQV Suction Return Kit - Mitsubishi Lancer Evolution Wagon CT9W (2003-2006)","handle":"hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-wagon-ct9w-2003-2006-71002-am002","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eKit Includes:\u003cbr\u003e- All the Gray parts on picture\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe HKS Super SQV Suction Return Kit Mitsubishi Lancer Evolution VII~IX CT9A CT9W will ensures your vehicle legality by haing the air returning to the suction like the stock air bypass valve. This process sill reduce the sound of the Blow-off valve, but more sound will come out from the Air cleaner.Upon purchasing please state the car from the compatibility list that you would like to have the HKS Suction Return Kit for.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution Wagon - CT9W (2003-2006) 4G63\u003c!--split--\u003e","published_at":"2021-03-12T11:16:52+08:00","created_at":"2021-03-12T11:16:52+08:00","vendor":"Hks","type":"Universal Blow Off Valves","tags":["2003","2004","2005","2006","forced-induction","hks","jp1","lancer-evolution-wagon-ct9w-2003-2006-tc-4g63t-mivec-i4","mitsubishi","universal-blow-off-valves","ws12"],"price":8460,"price_min":8460,"price_max":8460,"available":true,"price_varies":false,"compare_at_price":7900,"compare_at_price_min":7900,"compare_at_price_max":7900,"compare_at_price_varies":false,"variants":[{"id":39347321274550,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"71002-AM002","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Super SQV Suction Return Kit - Mitsubishi Lancer Evolution Wagon CT9W (2003-2006)","public_title":null,"options":["Default Title"],"price":8460,"weight":1000,"compare_at_price":7900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-wagon-ct9w-2003-2006-rzcrew.jpg?v=1710326218"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-wagon-ct9w-2003-2006-rzcrew.jpg?v=1710326218","options":["Title"],"media":[{"alt":"HKS Super SQV Suction Return Kit - Mitsubishi Lancer Evolution Wagon CT9W (2003-2006) - 71002-AM002 - Rzcrewgarage","id":22330846806198,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-wagon-ct9w-2003-2006-rzcrew.jpg?v=1710326218"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-wagon-ct9w-2003-2006-rzcrew.jpg?v=1710326218","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eKit Includes:\u003cbr\u003e- All the Gray parts on picture\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe HKS Super SQV Suction Return Kit Mitsubishi Lancer Evolution VII~IX CT9A CT9W will ensures your vehicle legality by haing the air returning to the suction like the stock air bypass valve. This process sill reduce the sound of the Blow-off valve, but more sound will come out from the Air cleaner.Upon purchasing please state the car from the compatibility list that you would like to have the HKS Suction Return Kit for.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution Wagon - CT9W (2003-2006) 4G63\u003c!--split--\u003e"}

{"id":6572369051830,"title":"HKS Super SQV Suction Return Kit - Mitsubishi Lancer Evolution VIII CT9A (2003-2005)","handle":"hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-viii-ct9a-2003-2005-71002-am002","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eKit Includes:\u003cbr\u003e- All the Gray parts on picture\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe HKS Super SQV Suction Return Kit Mitsubishi Lancer Evolution VII~IX CT9A CT9W will ensures your vehicle legality by haing the air returning to the suction like the stock air bypass valve. This process sill reduce the sound of the Blow-off valve, but more sound will come out from the Air cleaner.Upon purchasing please state the car from the compatibility list that you would like to have the HKS Suction Return Kit for.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution VIII - CT9A (2003-2005) 4G63\u003c!--split--\u003e","published_at":"2021-03-12T11:16:51+08:00","created_at":"2021-03-12T11:16:51+08:00","vendor":"Hks","type":"Universal Blow Off Valves","tags":["2003","2004","2005","forced-induction","hks","jp1","lancer-evolution-viii-ct9a-2003-2005-tc-4g63t-mivec-i4","mitsubishi","universal-blow-off-valves","ws12"],"price":8460,"price_min":8460,"price_max":8460,"available":true,"price_varies":false,"compare_at_price":7900,"compare_at_price_min":7900,"compare_at_price_max":7900,"compare_at_price_varies":false,"variants":[{"id":39347321241782,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"71002-AM002","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Super SQV Suction Return Kit - Mitsubishi Lancer Evolution VIII CT9A (2003-2005)","public_title":null,"options":["Default Title"],"price":8460,"weight":1000,"compare_at_price":7900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-viii-ct9a-2003-2005-rzcrew.jpg?v=1710326218"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-viii-ct9a-2003-2005-rzcrew.jpg?v=1710326218","options":["Title"],"media":[{"alt":"HKS Super SQV Suction Return Kit - Mitsubishi Lancer Evolution VIII CT9A (2003-2005) - 71002-AM002 - Rzcrewgarage","id":22330846675126,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-viii-ct9a-2003-2005-rzcrew.jpg?v=1710326218"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-viii-ct9a-2003-2005-rzcrew.jpg?v=1710326218","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eKit Includes:\u003cbr\u003e- All the Gray parts on picture\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe HKS Super SQV Suction Return Kit Mitsubishi Lancer Evolution VII~IX CT9A CT9W will ensures your vehicle legality by haing the air returning to the suction like the stock air bypass valve. This process sill reduce the sound of the Blow-off valve, but more sound will come out from the Air cleaner.Upon purchasing please state the car from the compatibility list that you would like to have the HKS Suction Return Kit for.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution VIII - CT9A (2003-2005) 4G63\u003c!--split--\u003e"}

{"id":6572368920758,"title":"HKS Super SQV Suction Return Kit - Mitsubishi Lancer Evolution X CZ4A (2007-2017)","handle":"hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-x-cz4a-2007-2017-71002-am001","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eKit Includes:\u003cbr\u003e- All the parts on picture\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThis item will ensures your vehicle legality by haing the air returning to the suction like the stock air bypass valve. This process sill reduce the sound of the Blow-off valve, but more sound will come out from the Air cleaner. \u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution X - CZ4A (2007-2008) 4B11\u003cbr\u003eMitsubishi - Lancer Evolution X - CZ4A (2008-2009) 4B11\u003cbr\u003eMitsubishi - Lancer Evolution X - CZ4A (2009-2017) 4B11\u003c!--split--\u003e","published_at":"2021-03-12T11:16:47+08:00","created_at":"2021-03-12T11:16:48+08:00","vendor":"Hks","type":"Universal Blow Off Valves","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","forced-induction","hks","jp1","lancer-evolution-x-cz4a-chuki-rs-jdmgsr-2008-2009-tc-4b11-i4","lancer-evolution-x-cz4a-kouki-rs-jdmgsr-2009-2017-tc-4b11-i4","lancer-evolution-x-cz4a-zenki-rs-jdmgsr-2007-2008-tc-4b11-i4","mitsubishi","universal-blow-off-valves","ws12"],"price":5230,"price_min":5230,"price_max":5230,"available":true,"price_varies":false,"compare_at_price":4900,"compare_at_price_min":4900,"compare_at_price_max":4900,"compare_at_price_varies":false,"variants":[{"id":39347319374006,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"71002-AM001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Super SQV Suction Return Kit - Mitsubishi Lancer Evolution X CZ4A (2007-2017)","public_title":null,"options":["Default Title"],"price":5230,"weight":1000,"compare_at_price":4900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-x-cz4a-2007-2017-rzcrew.jpg?v=1710326218"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-x-cz4a-2007-2017-rzcrew.jpg?v=1710326218","options":["Title"],"media":[{"alt":"HKS Super SQV Suction Return Kit - Mitsubishi Lancer Evolution X CZ4A (2007-2017) - 71002-AM001 - Rzcrewgarage","id":22330846150838,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-x-cz4a-2007-2017-rzcrew.jpg?v=1710326218"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-x-cz4a-2007-2017-rzcrew.jpg?v=1710326218","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eKit Includes:\u003cbr\u003e- All the parts on picture\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThis item will ensures your vehicle legality by haing the air returning to the suction like the stock air bypass valve. This process sill reduce the sound of the Blow-off valve, but more sound will come out from the Air cleaner. \u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution X - CZ4A (2007-2008) 4B11\u003cbr\u003eMitsubishi - Lancer Evolution X - CZ4A (2008-2009) 4B11\u003cbr\u003eMitsubishi - Lancer Evolution X - CZ4A (2009-2017) 4B11\u003c!--split--\u003e"}

{"id":6572369019062,"title":"HKS Super SQV Suction Return Kit - Mitsubishi Lancer Evolution VII CT9A (2001-2002)","handle":"hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-vii-ct9a-2001-2002-71002-am002","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eKit Includes:\u003cbr\u003e- All the Gray parts on picture\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe HKS Super SQV Suction Return Kit Mitsubishi Lancer Evolution VII~IX CT9A CT9W will ensures your vehicle legality by haing the air returning to the suction like the stock air bypass valve. This process sill reduce the sound of the Blow-off valve, but more sound will come out from the Air cleaner.Upon purchasing please state the car from the compatibility list that you would like to have the HKS Suction Return Kit for.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution VII - CT9A (2001-2002) 4G63\u003c!--split--\u003e","published_at":"2021-03-12T11:16:49+08:00","created_at":"2021-03-12T11:16:50+08:00","vendor":"Hks","type":"Universal Blow Off Valves","tags":["2001","2002","forced-induction","hks","jp1","lancer-evolution-vii-ct9a-2001-2002-tc-4g63t-3rd-gen-i4","mitsubishi","universal-blow-off-valves","ws12"],"price":8460,"price_min":8460,"price_max":8460,"available":true,"price_varies":false,"compare_at_price":7900,"compare_at_price_min":7900,"compare_at_price_max":7900,"compare_at_price_varies":false,"variants":[{"id":39347321209014,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"71002-AM002","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Super SQV Suction Return Kit - Mitsubishi Lancer Evolution VII CT9A (2001-2002)","public_title":null,"options":["Default Title"],"price":8460,"weight":1000,"compare_at_price":7900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-vii-ct9a-2001-2002-rzcrew.jpg?v=1710326218"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-vii-ct9a-2001-2002-rzcrew.jpg?v=1710326218","options":["Title"],"media":[{"alt":"HKS Super SQV Suction Return Kit - Mitsubishi Lancer Evolution VII CT9A (2001-2002) - 71002-AM002 - Rzcrewgarage","id":22330846576822,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-vii-ct9a-2001-2002-rzcrew.jpg?v=1710326218"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-vii-ct9a-2001-2002-rzcrew.jpg?v=1710326218","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eKit Includes:\u003cbr\u003e- All the Gray parts on picture\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe HKS Super SQV Suction Return Kit Mitsubishi Lancer Evolution VII~IX CT9A CT9W will ensures your vehicle legality by haing the air returning to the suction like the stock air bypass valve. This process sill reduce the sound of the Blow-off valve, but more sound will come out from the Air cleaner.Upon purchasing please state the car from the compatibility list that you would like to have the HKS Suction Return Kit for.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution VII - CT9A (2001-2002) 4G63\u003c!--split--\u003e"}

{"id":6572369412278,"title":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution IX CT9A (2005-2007)","handle":"hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-ix-ct9a-2005-2007-71008-am011","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- Not compatible with GT-A models\u003cbr\u003e- Not be used with piping kit\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution IX - CT9A (2005-2007) 4G63\u003c!--split--\u003e","published_at":"2021-03-12T11:17:06+08:00","created_at":"2021-03-12T11:17:06+08:00","vendor":"Hks","type":"Universal Blow Off Valves","tags":["2005","2006","2007","forced-induction","hks","jp1","lancer-evolution-ix-ct9a-2005-2007-tc-4g63t-mivec-i4","mitsubishi","universal-blow-off-valves","ws122"],"price":27480,"price_min":27480,"price_max":27480,"available":true,"price_varies":false,"compare_at_price":33000,"compare_at_price_min":33000,"compare_at_price_max":33000,"compare_at_price_varies":false,"variants":[{"id":39347322454198,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"71008-AM011","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution IX CT9A (2005-2007)","public_title":null,"options":["Default Title"],"price":27480,"weight":3000,"compare_at_price":33000,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-ix-ct9a-2005-2007-rzcrew.jpg?v=1710326215"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-ix-ct9a-2005-2007-rzcrew.jpg?v=1710326215","options":["Title"],"media":[{"alt":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution IX CT9A (2005-2007) - 71008-AM011 - Rzcrewgarage","id":22330848641206,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-ix-ct9a-2005-2007-rzcrew.jpg?v=1710326215"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-ix-ct9a-2005-2007-rzcrew.jpg?v=1710326215","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- Not compatible with GT-A models\u003cbr\u003e- Not be used with piping kit\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution IX - CT9A (2005-2007) 4G63\u003c!--split--\u003e"}

{"id":6572368986294,"title":"HKS Super SQV Suction Return Kit - Mitsubishi Lancer Evolution IX CT9A (2005-2007)","handle":"hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-ix-ct9a-2005-2007-71002-am002","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eKit Includes:\u003cbr\u003e- All the Gray parts on picture\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe HKS Super SQV Suction Return Kit Mitsubishi Lancer Evolution VII~IX CT9A CT9W will ensures your vehicle legality by haing the air returning to the suction like the stock air bypass valve. This process sill reduce the sound of the Blow-off valve, but more sound will come out from the Air cleaner.Upon purchasing please state the car from the compatibility list that you would like to have the HKS Suction Return Kit for.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution IX - CT9A (2005-2007) 4G63\u003c!--split--\u003e","published_at":"2021-03-12T11:16:48+08:00","created_at":"2021-03-12T11:16:49+08:00","vendor":"Hks","type":"Universal Blow Off Valves","tags":["2005","2006","2007","forced-induction","hks","jp1","lancer-evolution-ix-ct9a-2005-2007-tc-4g63t-mivec-i4","mitsubishi","universal-blow-off-valves","ws12"],"price":8460,"price_min":8460,"price_max":8460,"available":true,"price_varies":false,"compare_at_price":7900,"compare_at_price_min":7900,"compare_at_price_max":7900,"compare_at_price_varies":false,"variants":[{"id":39347320193206,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"71002-AM002","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Super SQV Suction Return Kit - Mitsubishi Lancer Evolution IX CT9A (2005-2007)","public_title":null,"options":["Default Title"],"price":8460,"weight":1000,"compare_at_price":7900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-ix-ct9a-2005-2007-rzcrew.jpg?v=1710326218"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-ix-ct9a-2005-2007-rzcrew.jpg?v=1710326218","options":["Title"],"media":[{"alt":"HKS Super SQV Suction Return Kit - Mitsubishi Lancer Evolution IX CT9A (2005-2007) - 71002-AM002 - Rzcrewgarage","id":22330846380214,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-ix-ct9a-2005-2007-rzcrew.jpg?v=1710326218"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-ix-ct9a-2005-2007-rzcrew.jpg?v=1710326218","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eKit Includes:\u003cbr\u003e- All the Gray parts on picture\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe HKS Super SQV Suction Return Kit Mitsubishi Lancer Evolution VII~IX CT9A CT9W will ensures your vehicle legality by haing the air returning to the suction like the stock air bypass valve. This process sill reduce the sound of the Blow-off valve, but more sound will come out from the Air cleaner.Upon purchasing please state the car from the compatibility list that you would like to have the HKS Suction Return Kit for.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution IX - CT9A (2005-2007) 4G63\u003c!--split--\u003e"}

{"id":6570243686582,"title":"HKS Super SQV IV Sequential Blow Off Valve Kit Black Edition - Subaru WRX S4 VAG Applied A-D (2014-2021)","handle":"hks-super-sqv-iv-sequential-blow-off-valve-kit-black-edition-subaru-wrx-s4-vag-applied-a-d-2014-2021-71008-af015b","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 71008-AF015B\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e-Suction Return \u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThis is the Black Edition head unit available as a Full Kit released with Limited Stock. The Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - WRX S4 - VAG Applied A (2014-2015) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied B (2015-2016) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied C (2016-2017) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied D (2017-2021) FA20\u003c!--split--\u003e","published_at":"2021-03-11T16:47:43+08:00","created_at":"2021-03-11T16:47:44+08:00","vendor":"HKS","type":"Universal Blow Off Valves","tags":["2014","2015","2016","2017","2018","2019","2020","2021","forced-induction","hks","jp1","subaru","universal-blow-off-valves","wrx-s4-vag-applied-a-2014-2015-tc-fa20f-h4","wrx-s4-vag-applied-b-2015-2016-tc-fa20f-h4","wrx-s4-vag-applied-c-2016-2018-tc-fa20f-h4","wrx-s4-vag-applied-d-2017-2021-tc-fa20f-h4","ws123"],"price":29980,"price_min":29980,"price_max":29980,"available":true,"price_varies":false,"compare_at_price":36000,"compare_at_price_min":36000,"compare_at_price_max":36000,"compare_at_price_varies":false,"variants":[{"id":39339575771318,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"71008-AF015B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Super SQV IV Sequential Blow Off Valve Kit Black Edition - Subaru WRX S4 VAG Applied A-D (2014-2021)","public_title":null,"options":["Default Title"],"price":29980,"weight":3000,"compare_at_price":36000,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-black-edition-subaru-wrx-s4-vag-applied-a-d-2014-2021-rzcrew.png?v=1710326296"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-black-edition-subaru-wrx-s4-vag-applied-a-d-2014-2021-rzcrew.png?v=1710326296","options":["Title"],"media":[{"alt":"HKS Super SQV IV Sequential Blow Off Valve Kit Black Edition - Subaru WRX S4 VAG Applied A-D (2014-2021) - 71008-AF015B - Rzcrewgarage","id":22888504328374,"position":1,"preview_image":{"aspect_ratio":1.426,"height":1088,"width":1552,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-black-edition-subaru-wrx-s4-vag-applied-a-d-2014-2021-rzcrew.png?v=1710326296"},"aspect_ratio":1.426,"height":1088,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-black-edition-subaru-wrx-s4-vag-applied-a-d-2014-2021-rzcrew.png?v=1710326296","width":1552}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 71008-AF015B\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e-Suction Return \u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThis is the Black Edition head unit available as a Full Kit released with Limited Stock. The Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - WRX S4 - VAG Applied A (2014-2015) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied B (2015-2016) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied C (2016-2017) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied D (2017-2021) FA20\u003c!--split--\u003e"}