Mishimoto

{"id":561993941019,"title":"Mishimoto - Subaru WRX Downpipe - VAG - MMDP-WRX-15CAT","handle":"mishimoto-subaru-wrx-downpipe-vag-mmdp-wrx-15cat","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMDP-WRX-15CAT\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX 6SPD\u003cbr\u003eDyno-proven gains of up to 57 whp and 52 wtq with the catted downpipe and a tune, using 93 octane fuel on 6-speed WRX (see additional images for dyno chart)\u003cbr\u003eDyno-proven gains of up to 73 whp and 64 wtq with the catted downpipe, a tune, and the Mishimoto Subaru WRX Performance Air Intake, using 93 octane fuel on 6-speed WRX (see additional images for dyno chart)\u003cbr\u003eSignificant torque improvement in the low end and across the entire power band\u003cbr\u003eFits with both CVT and manual transmissions\u003cbr\u003eExtremely aggressive turbo and exhaust tone under acceleration and boost\u003cbr\u003e304 stainless steel one-piece design allows for uninterrupted exhaust flow\u003cbr\u003e3\/8\" thick stainless steel, CNC-machined four-bolt flange\u003cbr\u003e3.5\" to 3.0\" transition out of turbo outlet allows exhaust gas to flow smoothly\u003cbr\u003eAdditional wideband oxygen-sensor bung and plug-in ideal location for aftermarket wideband sensors\u003cbr\u003eMates with the stock cat-back exhaust\u003cbr\u003eNew studs for turbine housing\u003cbr\u003eIncludes stock gasket for turbo outlet\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Downpipe w\/ 4-Bolt Turbo Flange and 2-Bolt Cat Flange\u003cbr\u003e(1) Stainless Steel Transmission Bracket (Manual or CVT) \u003cbr\u003e(1) High-flow Catalytic Converter (Optional) \u003cbr\u003e(1) Additional M18 x 1.5 O2 Bung with Plug \u003cbr\u003e(1) 4-Bolt Flange Gasket \u003cbr\u003e(1) 2-Bolt Flange Gasket \u003cbr\u003e(4) M10 x 1.25 Exhaust Studs\u003cbr\u003e(2) M10 x 1.25 x 40mm Hex Bolts, Stainless Steel \u003cbr\u003e(6) M10 x 1.25 Serrated Flange Nuts, Stainless Steel\u003cbr\u003e(2) M10 x 1.25 x 16mm Hex Bolts (w\/ 5mm Head Height), Stainless Steel \u003cbr\u003e(4) M10 Washers, Stainless Steel \u003cbr\u003e(2) M8 x 1.25 x 20mm Flange Bolts, Stainless Steel \u003cbr\u003e(1) M6 x 1.0 x 10mm Flange Bolt, Stainless Steel \u003cbr\u003e\u003cbr\u003eNote This product has been designed to fit both manual and CVT transmission vehicles. Customers must select the correct transmission in the drop-down menu to receive the correct bracket. \u003cbr\u003e\u003cbr\u003eThe downpipe cannot be used with the stock ECU programming. The customer must retune the vehicle's ECU after installing the downpipe. Power gains will vary depending on the type of ECU tune that is applied to the vehicle.\u003cbr\u003e\u003cbr\u003eThe Mishimoto catless downpipe is for track and off-road use only. The customer must have a professional engine tune\/calibration after installing the catless downpipe.\u003cbr\u003e\u003cbr\u003eCustomers installing the Mishimoto catted downpipe and professional engine tune\/calibration must consult with their tuner for recommendations on how to handle the boost pills.\u003cbr\u003eFits 2015+ Subaru WRX\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eWeight 18 lbs\u003cbr\u003eOverall Width 5.5\"\u003cbr\u003eOverall Length 12\"\u003cbr\u003eOverall Height 65\"\u003cbr\u003eDiameter 3.5\" at Turbo Flange\u003cbr\u003e3.0\" From First Bend to End of Pipe\u003cbr\u003eFlange Material 304 Stainless Steel\u003cbr\u003ePipe Material 304 Stainless Steel\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is proud to expand their line of 2015 WRX parts to include the performance 2015 WRX Downpipe. The biggest restriction in the stock 2015 WRX exhaust system is the downpipe. By installing the Mishimoto 2015 WRX downpipe, the FA20DIT 2015 WRX exhaust system is able to breathe easier, providing a significant increase in horsepower and torque when tuned. During countless dyno pulls, Mishimoto saw gains of up to 73 whp and 64 wtq with the 2015 WRX catted downpipe, a tune, and the Mishimoto Subaru WRX Performance Air Intake using 93 octane fuel on the 6-speed 2015 WRX (see additional images for dyno chart). \u003cbr\u003e\u003cbr\u003eWith the catted downpipe and a tune, Mishimoto saw dyno proven gains of up to 57 whp and 52 wtq using 93 octane fuel on the 6-speed 2015 WRX (see additional images for dyno chart). Above all, this 2015 WRX downpipe provides a significant torque improvement in the low end and across the entire power band. The Mishimoto 2015 WRX downpipe provided an extremely aggressive turbo and exhaust tone under acceleration and boost, giving you that aggressive tone you have been looking for! \u003cbr\u003e\u003cbr\u003eThe engineers at Mishimoto designed the 2015 WRX downpipe as a one-piece design with precision TIG-welded 304 stainless steel. This allows uninterrupted exhaust flow from the 3.5\" 4-bolt exhaust flange all the way through the 3.0\" downpipe. The engineers also created two different transmission-specific brackets, for the 6-speed manual and CVT, to mount the downpipe to the transmission. To customize the 2015 WRX downpipe even further, it is offered in either a catted or catless version. Because the engineers know that 2015 WRX owners commonly like to add wideband O2 gauges, they included an additional O2 sensor bung and plug in an ideal location for aftermarket wideband sensors! \u003cbr\u003e\u003cbr\u003eTo top it off, the 2015 WRX downpipe includes new turbine housing studs and nuts (which commonly strip), a new turbo outlet gasket, a new 3” 2-bolt flange gasket, and all stainless steel hardware, so you don’t have to worry about rust. Like all our 2015 WRX parts, this WRX downpipe comes with the Mishimoto Lifetime Warranty you know and trust.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX 6SPD\u003cbr\u003eDyno-proven gains of up to 57 whp and 52 wtq with the catted downpipe and a tune, using 93 octane fuel on 6-speed WRX (see additional images for dyno chart)\u003cbr\u003eDyno-proven gains of up to 73 whp and 64 wtq with the catted downpipe, a tune, and the Mishimoto Subaru WRX Performance Air Intake, using 93 octane fuel on 6-speed WRX (see additional images for dyno chart)\u003cbr\u003eSignificant torque improvement in the low end and across the entire power band\u003cbr\u003eFits with both CVT and manual transmissions\u003cbr\u003eExtremely aggressive turbo and exhaust tone under acceleration and boost\u003cbr\u003e304 stainless steel one-piece design allows for uninterrupted exhaust flow\u003cbr\u003e3\/8\" thick stainless steel, CNC-machined four-bolt flange\u003cbr\u003e3.5\" to 3.0\" transition out of turbo outlet allows exhaust gas to flow smoothly\u003cbr\u003eAdditional wideband oxygen-sensor bung and plug-in ideal location for aftermarket wideband sensors\u003cbr\u003eMates with the stock cat-back exhaust\u003cbr\u003eNew studs for turbine housing\u003cbr\u003eIncludes stock gasket for turbo outlet\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Downpipe w\/ 4-Bolt Turbo Flange and 2-Bolt Cat Flange\u003cbr\u003e(1) Stainless Steel Transmission Bracket (Manual or CVT) \u003cbr\u003e(1) High-flow Catalytic Converter (Optional) \u003cbr\u003e(1) Additional M18 x 1.5 O2 Bung with Plug \u003cbr\u003e(1) 4-Bolt Flange Gasket \u003cbr\u003e(1) 2-Bolt Flange Gasket \u003cbr\u003e(4) M10 x 1.25 Exhaust Studs\u003cbr\u003e(2) M10 x 1.25 x 40mm Hex Bolts, Stainless Steel \u003cbr\u003e(6) M10 x 1.25 Serrated Flange Nuts, Stainless Steel\u003cbr\u003e(2) M10 x 1.25 x 16mm Hex Bolts (w\/ 5mm Head Height), Stainless Steel \u003cbr\u003e(4) M10 Washers, Stainless Steel \u003cbr\u003e(2) M8 x 1.25 x 20mm Flange Bolts, Stainless Steel \u003cbr\u003e(1) M6 x 1.0 x 10mm Flange Bolt, Stainless Steel \u003cbr\u003e\u003cbr\u003eNote This product has been designed to fit both manual and CVT transmission vehicles. Customers must select the correct transmission in the drop-down menu to receive the correct bracket. \u003cbr\u003e\u003cbr\u003eThe downpipe cannot be used with the stock ECU programming. The customer must retune the vehicle's ECU after installing the downpipe. Power gains will vary depending on the type of ECU tune that is applied to the vehicle.\u003cbr\u003e\u003cbr\u003eThe Mishimoto catless downpipe is for track and off-road use only. The customer must have a professional engine tune\/calibration after installing the catless downpipe.\u003cbr\u003e\u003cbr\u003eCustomers installing the Mishimoto catted downpipe and professional engine tune\/calibration must consult with their tuner for recommendations on how to handle the boost pills.\u003cbr\u003eFits 2015+ Subaru WRX\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eWeight 18 lbs\u003cbr\u003eOverall Width 5.5\"\u003cbr\u003eOverall Length 12\"\u003cbr\u003eOverall Height 65\"\u003cbr\u003eDiameter 3.5\" at Turbo Flange\u003cbr\u003e3.0\" From First Bend to End of Pipe\u003cbr\u003eFlange Material 304 Stainless Steel\u003cbr\u003ePipe Material 304 Stainless Steel\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is proud to expand their line of 2015 WRX parts to include the performance 2015 WRX Downpipe. The biggest restriction in the stock 2015 WRX exhaust system is the downpipe. By installing the Mishimoto 2015 WRX downpipe, the FA20DIT 2015 WRX exhaust system is able to breathe easier, providing a significant increase in horsepower and torque when tuned. During countless dyno pulls, Mishimoto saw gains of up to 73 whp and 64 wtq with the 2015 WRX catted downpipe, a tune, and the Mishimoto Subaru WRX Performance Air Intake using 93 octane fuel on the 6-speed 2015 WRX (see additional images for dyno chart). \u003cbr\u003e\u003cbr\u003eWith the catted downpipe and a tune, Mishimoto saw dyno proven gains of up to 57 whp and 52 wtq using 93 octane fuel on the 6-speed 2015 WRX (see additional images for dyno chart). Above all, this 2015 WRX downpipe provides a significant torque improvement in the low end and across the entire power band. The Mishimoto 2015 WRX downpipe provided an extremely aggressive turbo and exhaust tone under acceleration and boost, giving you that aggressive tone you have been looking for! \u003cbr\u003e\u003cbr\u003eThe engineers at Mishimoto designed the 2015 WRX downpipe as a one-piece design with precision TIG-welded 304 stainless steel. This allows uninterrupted exhaust flow from the 3.5\" 4-bolt exhaust flange all the way through the 3.0\" downpipe. The engineers also created two different transmission-specific brackets, for the 6-speed manual and CVT, to mount the downpipe to the transmission. To customize the 2015 WRX downpipe even further, it is offered in either a catted or catless version. Because the engineers know that 2015 WRX owners commonly like to add wideband O2 gauges, they included an additional O2 sensor bung and plug in an ideal location for aftermarket wideband sensors! \u003cbr\u003e\u003cbr\u003eTo top it off, the 2015 WRX downpipe includes new turbine housing studs and nuts (which commonly strip), a new turbo outlet gasket, a new 3” 2-bolt flange gasket, and all stainless steel hardware, so you don’t have to worry about rust. Like all our 2015 WRX parts, this WRX downpipe comes with the Mishimoto Lifetime Warranty you know and trust.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:25:36+08:00","created_at":"2018-01-24T23:25:38+08:00","vendor":"Mishimoto","type":"Catbacks - Exhaust Manifolds","tags":["2014","2015","2016","2017","2018","catbacks-exhaust-manifolds","down-pipe","exhaust","mishimoto","subaru","us1","wrx-s4-vag-applied-a-2014-2015-tc-fa20f-h4","wrx-s4-vag-applied-b-2015-2016-tc-fa20f-h4","wrx-s4-vag-applied-c-2016-2018-tc-fa20f-h4","ws18"],"price":108100,"price_min":108100,"price_max":108100,"available":true,"price_varies":false,"compare_at_price":117500,"compare_at_price_min":117500,"compare_at_price_max":117500,"compare_at_price_varies":false,"variants":[{"id":5990392987675,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMDP-WRX-15CAT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX Downpipe - VAG - MMDP-WRX-15CAT","public_title":null,"options":["Default Title"],"price":108100,"weight":13843,"compare_at_price":117500,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMDP-WRX-15CAT.jpg?v=1710154124"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMDP-WRX-15CAT.jpg?v=1710154124","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX Downpipe - VAG - MMDP-WRX-15CAT - Rzcrewgarage","id":1351402422369,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMDP-WRX-15CAT.jpg?v=1710154124"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMDP-WRX-15CAT.jpg?v=1710154124","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMDP-WRX-15CAT\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX 6SPD\u003cbr\u003eDyno-proven gains of up to 57 whp and 52 wtq with the catted downpipe and a tune, using 93 octane fuel on 6-speed WRX (see additional images for dyno chart)\u003cbr\u003eDyno-proven gains of up to 73 whp and 64 wtq with the catted downpipe, a tune, and the Mishimoto Subaru WRX Performance Air Intake, using 93 octane fuel on 6-speed WRX (see additional images for dyno chart)\u003cbr\u003eSignificant torque improvement in the low end and across the entire power band\u003cbr\u003eFits with both CVT and manual transmissions\u003cbr\u003eExtremely aggressive turbo and exhaust tone under acceleration and boost\u003cbr\u003e304 stainless steel one-piece design allows for uninterrupted exhaust flow\u003cbr\u003e3\/8\" thick stainless steel, CNC-machined four-bolt flange\u003cbr\u003e3.5\" to 3.0\" transition out of turbo outlet allows exhaust gas to flow smoothly\u003cbr\u003eAdditional wideband oxygen-sensor bung and plug-in ideal location for aftermarket wideband sensors\u003cbr\u003eMates with the stock cat-back exhaust\u003cbr\u003eNew studs for turbine housing\u003cbr\u003eIncludes stock gasket for turbo outlet\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Downpipe w\/ 4-Bolt Turbo Flange and 2-Bolt Cat Flange\u003cbr\u003e(1) Stainless Steel Transmission Bracket (Manual or CVT) \u003cbr\u003e(1) High-flow Catalytic Converter (Optional) \u003cbr\u003e(1) Additional M18 x 1.5 O2 Bung with Plug \u003cbr\u003e(1) 4-Bolt Flange Gasket \u003cbr\u003e(1) 2-Bolt Flange Gasket \u003cbr\u003e(4) M10 x 1.25 Exhaust Studs\u003cbr\u003e(2) M10 x 1.25 x 40mm Hex Bolts, Stainless Steel \u003cbr\u003e(6) M10 x 1.25 Serrated Flange Nuts, Stainless Steel\u003cbr\u003e(2) M10 x 1.25 x 16mm Hex Bolts (w\/ 5mm Head Height), Stainless Steel \u003cbr\u003e(4) M10 Washers, Stainless Steel \u003cbr\u003e(2) M8 x 1.25 x 20mm Flange Bolts, Stainless Steel \u003cbr\u003e(1) M6 x 1.0 x 10mm Flange Bolt, Stainless Steel \u003cbr\u003e\u003cbr\u003eNote This product has been designed to fit both manual and CVT transmission vehicles. Customers must select the correct transmission in the drop-down menu to receive the correct bracket. \u003cbr\u003e\u003cbr\u003eThe downpipe cannot be used with the stock ECU programming. The customer must retune the vehicle's ECU after installing the downpipe. Power gains will vary depending on the type of ECU tune that is applied to the vehicle.\u003cbr\u003e\u003cbr\u003eThe Mishimoto catless downpipe is for track and off-road use only. The customer must have a professional engine tune\/calibration after installing the catless downpipe.\u003cbr\u003e\u003cbr\u003eCustomers installing the Mishimoto catted downpipe and professional engine tune\/calibration must consult with their tuner for recommendations on how to handle the boost pills.\u003cbr\u003eFits 2015+ Subaru WRX\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eWeight 18 lbs\u003cbr\u003eOverall Width 5.5\"\u003cbr\u003eOverall Length 12\"\u003cbr\u003eOverall Height 65\"\u003cbr\u003eDiameter 3.5\" at Turbo Flange\u003cbr\u003e3.0\" From First Bend to End of Pipe\u003cbr\u003eFlange Material 304 Stainless Steel\u003cbr\u003ePipe Material 304 Stainless Steel\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is proud to expand their line of 2015 WRX parts to include the performance 2015 WRX Downpipe. The biggest restriction in the stock 2015 WRX exhaust system is the downpipe. By installing the Mishimoto 2015 WRX downpipe, the FA20DIT 2015 WRX exhaust system is able to breathe easier, providing a significant increase in horsepower and torque when tuned. During countless dyno pulls, Mishimoto saw gains of up to 73 whp and 64 wtq with the 2015 WRX catted downpipe, a tune, and the Mishimoto Subaru WRX Performance Air Intake using 93 octane fuel on the 6-speed 2015 WRX (see additional images for dyno chart). \u003cbr\u003e\u003cbr\u003eWith the catted downpipe and a tune, Mishimoto saw dyno proven gains of up to 57 whp and 52 wtq using 93 octane fuel on the 6-speed 2015 WRX (see additional images for dyno chart). Above all, this 2015 WRX downpipe provides a significant torque improvement in the low end and across the entire power band. The Mishimoto 2015 WRX downpipe provided an extremely aggressive turbo and exhaust tone under acceleration and boost, giving you that aggressive tone you have been looking for! \u003cbr\u003e\u003cbr\u003eThe engineers at Mishimoto designed the 2015 WRX downpipe as a one-piece design with precision TIG-welded 304 stainless steel. This allows uninterrupted exhaust flow from the 3.5\" 4-bolt exhaust flange all the way through the 3.0\" downpipe. The engineers also created two different transmission-specific brackets, for the 6-speed manual and CVT, to mount the downpipe to the transmission. To customize the 2015 WRX downpipe even further, it is offered in either a catted or catless version. Because the engineers know that 2015 WRX owners commonly like to add wideband O2 gauges, they included an additional O2 sensor bung and plug in an ideal location for aftermarket wideband sensors! \u003cbr\u003e\u003cbr\u003eTo top it off, the 2015 WRX downpipe includes new turbine housing studs and nuts (which commonly strip), a new turbo outlet gasket, a new 3” 2-bolt flange gasket, and all stainless steel hardware, so you don’t have to worry about rust. Like all our 2015 WRX parts, this WRX downpipe comes with the Mishimoto Lifetime Warranty you know and trust.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX 6SPD\u003cbr\u003eDyno-proven gains of up to 57 whp and 52 wtq with the catted downpipe and a tune, using 93 octane fuel on 6-speed WRX (see additional images for dyno chart)\u003cbr\u003eDyno-proven gains of up to 73 whp and 64 wtq with the catted downpipe, a tune, and the Mishimoto Subaru WRX Performance Air Intake, using 93 octane fuel on 6-speed WRX (see additional images for dyno chart)\u003cbr\u003eSignificant torque improvement in the low end and across the entire power band\u003cbr\u003eFits with both CVT and manual transmissions\u003cbr\u003eExtremely aggressive turbo and exhaust tone under acceleration and boost\u003cbr\u003e304 stainless steel one-piece design allows for uninterrupted exhaust flow\u003cbr\u003e3\/8\" thick stainless steel, CNC-machined four-bolt flange\u003cbr\u003e3.5\" to 3.0\" transition out of turbo outlet allows exhaust gas to flow smoothly\u003cbr\u003eAdditional wideband oxygen-sensor bung and plug-in ideal location for aftermarket wideband sensors\u003cbr\u003eMates with the stock cat-back exhaust\u003cbr\u003eNew studs for turbine housing\u003cbr\u003eIncludes stock gasket for turbo outlet\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Downpipe w\/ 4-Bolt Turbo Flange and 2-Bolt Cat Flange\u003cbr\u003e(1) Stainless Steel Transmission Bracket (Manual or CVT) \u003cbr\u003e(1) High-flow Catalytic Converter (Optional) \u003cbr\u003e(1) Additional M18 x 1.5 O2 Bung with Plug \u003cbr\u003e(1) 4-Bolt Flange Gasket \u003cbr\u003e(1) 2-Bolt Flange Gasket \u003cbr\u003e(4) M10 x 1.25 Exhaust Studs\u003cbr\u003e(2) M10 x 1.25 x 40mm Hex Bolts, Stainless Steel \u003cbr\u003e(6) M10 x 1.25 Serrated Flange Nuts, Stainless Steel\u003cbr\u003e(2) M10 x 1.25 x 16mm Hex Bolts (w\/ 5mm Head Height), Stainless Steel \u003cbr\u003e(4) M10 Washers, Stainless Steel \u003cbr\u003e(2) M8 x 1.25 x 20mm Flange Bolts, Stainless Steel \u003cbr\u003e(1) M6 x 1.0 x 10mm Flange Bolt, Stainless Steel \u003cbr\u003e\u003cbr\u003eNote This product has been designed to fit both manual and CVT transmission vehicles. Customers must select the correct transmission in the drop-down menu to receive the correct bracket. \u003cbr\u003e\u003cbr\u003eThe downpipe cannot be used with the stock ECU programming. The customer must retune the vehicle's ECU after installing the downpipe. Power gains will vary depending on the type of ECU tune that is applied to the vehicle.\u003cbr\u003e\u003cbr\u003eThe Mishimoto catless downpipe is for track and off-road use only. The customer must have a professional engine tune\/calibration after installing the catless downpipe.\u003cbr\u003e\u003cbr\u003eCustomers installing the Mishimoto catted downpipe and professional engine tune\/calibration must consult with their tuner for recommendations on how to handle the boost pills.\u003cbr\u003eFits 2015+ Subaru WRX\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eWeight 18 lbs\u003cbr\u003eOverall Width 5.5\"\u003cbr\u003eOverall Length 12\"\u003cbr\u003eOverall Height 65\"\u003cbr\u003eDiameter 3.5\" at Turbo Flange\u003cbr\u003e3.0\" From First Bend to End of Pipe\u003cbr\u003eFlange Material 304 Stainless Steel\u003cbr\u003ePipe Material 304 Stainless Steel\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is proud to expand their line of 2015 WRX parts to include the performance 2015 WRX Downpipe. The biggest restriction in the stock 2015 WRX exhaust system is the downpipe. By installing the Mishimoto 2015 WRX downpipe, the FA20DIT 2015 WRX exhaust system is able to breathe easier, providing a significant increase in horsepower and torque when tuned. During countless dyno pulls, Mishimoto saw gains of up to 73 whp and 64 wtq with the 2015 WRX catted downpipe, a tune, and the Mishimoto Subaru WRX Performance Air Intake using 93 octane fuel on the 6-speed 2015 WRX (see additional images for dyno chart). \u003cbr\u003e\u003cbr\u003eWith the catted downpipe and a tune, Mishimoto saw dyno proven gains of up to 57 whp and 52 wtq using 93 octane fuel on the 6-speed 2015 WRX (see additional images for dyno chart). Above all, this 2015 WRX downpipe provides a significant torque improvement in the low end and across the entire power band. The Mishimoto 2015 WRX downpipe provided an extremely aggressive turbo and exhaust tone under acceleration and boost, giving you that aggressive tone you have been looking for! \u003cbr\u003e\u003cbr\u003eThe engineers at Mishimoto designed the 2015 WRX downpipe as a one-piece design with precision TIG-welded 304 stainless steel. This allows uninterrupted exhaust flow from the 3.5\" 4-bolt exhaust flange all the way through the 3.0\" downpipe. The engineers also created two different transmission-specific brackets, for the 6-speed manual and CVT, to mount the downpipe to the transmission. To customize the 2015 WRX downpipe even further, it is offered in either a catted or catless version. Because the engineers know that 2015 WRX owners commonly like to add wideband O2 gauges, they included an additional O2 sensor bung and plug in an ideal location for aftermarket wideband sensors! \u003cbr\u003e\u003cbr\u003eTo top it off, the 2015 WRX downpipe includes new turbine housing studs and nuts (which commonly strip), a new turbo outlet gasket, a new 3” 2-bolt flange gasket, and all stainless steel hardware, so you don’t have to worry about rust. Like all our 2015 WRX parts, this WRX downpipe comes with the Mishimoto Lifetime Warranty you know and trust.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561993875483,"title":"Mishimoto - Toyota 86 Oil Cooler Kit, Black - Black - ZN6(ALL) - MMOC-BRZ-13BK","handle":"mishimoto-toyota-86-oil-cooler-kit-black-black-zn6all-mmoc-brz-13bk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-BRZ-13BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:25:35+08:00","created_at":"2018-01-24T23:25:35+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2012","2013","2014","2015","2016","2017","2018","brz-zc6-applied-a-2012-2013-na-fa20d-h4","brz-zc6-applied-b-2013-2014-na-fa20d-h4","brz-zc6-applied-c-2014-2015-na-fa20d-h4","car-specific","cooling","mishimoto","oil-cooler-kits","oil-coolers","subaru","us1","ws112"],"price":94688,"price_min":94688,"price_max":94688,"available":true,"price_varies":false,"compare_at_price":107600,"compare_at_price_min":107600,"compare_at_price_max":107600,"compare_at_price_varies":false,"variants":[{"id":5990392922139,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-BRZ-13BK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Toyota 86 Oil Cooler Kit, Black - Black - ZN6(ALL) - MMOC-BRZ-13BK","public_title":null,"options":["Default Title"],"price":94688,"weight":10033,"compare_at_price":107600,"inventory_quantity":16,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13BK_0a3072c9-0ee1-4353-8919-73d73042121b.jpg?v=1710154124"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13BK_0a3072c9-0ee1-4353-8919-73d73042121b.jpg?v=1710154124","options":["Title"],"media":[{"alt":"Mishimoto - Toyota 86 Oil Cooler Kit, Black - Black - ZN6(ALL) - MMOC-BRZ-13BK - Rzcrewgarage","id":1351402356833,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13BK_0a3072c9-0ee1-4353-8919-73d73042121b.jpg?v=1710154124"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13BK_0a3072c9-0ee1-4353-8919-73d73042121b.jpg?v=1710154124","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-BRZ-13BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561993842715,"title":"Mishimoto - Toyota 86 Oil Cooler Kit - ZN6(ALL) - MMOC-BRZ-13","handle":"mishimoto-toyota-86-oil-cooler-kit-zn6all-mmoc-brz-13","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-BRZ-13\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:25:34+08:00","created_at":"2018-01-24T23:25:34+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2012","2013","2014","2015","2016","2017","2018","brz-zc6-applied-a-2012-2013-na-fa20d-h4","brz-zc6-applied-b-2013-2014-na-fa20d-h4","brz-zc6-applied-c-2014-2015-na-fa20d-h4","car-specific","cooling","mishimoto","oil-cooler-kits","oil-coolers","subaru","us1","ws112"],"price":94688,"price_min":94688,"price_max":94688,"available":true,"price_varies":false,"compare_at_price":107600,"compare_at_price_min":107600,"compare_at_price_max":107600,"compare_at_price_varies":false,"variants":[{"id":5990392889371,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-BRZ-13","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Toyota 86 Oil Cooler Kit - ZN6(ALL) - MMOC-BRZ-13","public_title":null,"options":["Default Title"],"price":94688,"weight":10169,"compare_at_price":107600,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13_114a9343-bcbb-431d-94fe-ba91c0ff3a8a.jpg?v=1710154117"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13_114a9343-bcbb-431d-94fe-ba91c0ff3a8a.jpg?v=1710154117","options":["Title"],"media":[{"alt":"Mishimoto - Toyota 86 Oil Cooler Kit - ZN6(ALL) - MMOC-BRZ-13 - Rzcrewgarage","id":1351402324065,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13_114a9343-bcbb-431d-94fe-ba91c0ff3a8a.jpg?v=1710154117"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13_114a9343-bcbb-431d-94fe-ba91c0ff3a8a.jpg?v=1710154117","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-BRZ-13\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561989320731,"title":"Mishimoto - Subaru WRX Thermostatic Oil Cooler Kit, Black - Black - GH GE GR GV - MMOC-WRX-08TBK","handle":"mishimoto-subaru-wrx-thermostatic-oil-cooler-kit-black-black-gh-ge-gr-gv-mmoc-wrx-08tbk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-08TBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2008-2014 Subaru WRX\u003cbr\u003eProven +25°F (+13.9°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation, functions with all stock equipment\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined application-specific sandwich plate\u003cbr\u003eWorks in conjunction with stock liquid-to-liquid heat exchanger for proper fluid warm-up and regulation\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ255\u003cbr\u003eChassis Codes GH, GE ,GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 50°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets and Spacer\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 45-degree and 90-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) 15mm CNC Sandwich Plate Spacer\u003cbr\u003e(1) Application specific M20 Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eHigh oil temperatures can wreak havoc on your high-performance flat four. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2008-2014 Subaru WRX. The WRX has a lot to offer with its turbocharged engine and fantastic AWD system, but these vehicles are not factory-equipped with an oil cooler. Properly regulated oil temperatures become even more important if you have modified your vehicle or spend time tracking your WRX. \u003cbr\u003e\u003cbr\u003eMishimoto's direct-fit oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included CNC-machined aluminum spacer provides ample room for our oil sandwich plate, making this kit compatible with the factory exhaust manifold heat shields. This kit includes preassembled stainless steel lines with -10AN fittings and a thermal reflective wrap that deflects radiant heat from the exhaust. With this setup, your WRX can achieve a 50+°F (34+°C) drop in oil temperatures with minimal pressure loss. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru WRX Oil Cooler Kit is available with a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate, for even greater control over your oil temperatures. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2008-2014 Subaru WRX\u003cbr\u003eProven +25°F (+13.9°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation, functions with all stock equipment\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined application-specific sandwich plate\u003cbr\u003eWorks in conjunction with stock liquid-to-liquid heat exchanger for proper fluid warm-up and regulation\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ255\u003cbr\u003eChassis Codes GH, GE ,GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 50°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets and Spacer\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 45-degree and 90-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) 15mm CNC Sandwich Plate Spacer\u003cbr\u003e(1) Application specific M20 Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eHigh oil temperatures can wreak havoc on your high-performance flat four. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2008-2014 Subaru WRX. The WRX has a lot to offer with its turbocharged engine and fantastic AWD system, but these vehicles are not factory-equipped with an oil cooler. Properly regulated oil temperatures become even more important if you have modified your vehicle or spend time tracking your WRX. \u003cbr\u003e\u003cbr\u003eMishimoto's direct-fit oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included CNC-machined aluminum spacer provides ample room for our oil sandwich plate, making this kit compatible with the factory exhaust manifold heat shields. This kit includes preassembled stainless steel lines with -10AN fittings and a thermal reflective wrap that deflects radiant heat from the exhaust. With this setup, your WRX can achieve a 50+°F (34+°C) drop in oil temperatures with minimal pressure loss. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru WRX Oil Cooler Kit is available with a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate, for even greater control over your oil temperatures. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 5 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:45+08:00","created_at":"2018-01-24T23:24:46+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2007","2008","2009","2010","2011","2012","2013","2014","car-specific","cooling","impreza-wrx-hatch-gh6-applied-e-2008-2014-tc-ej255-h4","impreza-wrx-sedan-ge6-applied-e-2008-2014-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-b-2009-2009-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-c-2007-2012-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-c-2010-2012-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-grb-applied-a-2007-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-b-2009-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-c-2010-2012-tc-ej207-h4","impreza-wrx-sti-grb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-grb-applied-e-2013-2014-tc-ej207-h4","impreza-wrx-sti-gvb-applied-c-2007-2012-tc-ej207-h4","impreza-wrx-sti-gvb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-gvb-applied-e-2013-2014-tc-ej207-h4","mishimoto","oil-cooler-kits","oil-coolers","subaru","us1","ws111"],"price":85707,"price_min":85707,"price_max":85707,"available":true,"price_varies":false,"compare_at_price":96300,"compare_at_price_min":96300,"compare_at_price_max":96300,"compare_at_price_varies":false,"variants":[{"id":5990386499611,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-WRX-08TBK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX Thermostatic Oil Cooler Kit, Black - Black - GH GE GR GV - MMOC-WRX-08TBK","public_title":null,"options":["Default Title"],"price":85707,"weight":9216,"compare_at_price":96300,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-08TBK.jpg?v=1710154094"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-08TBK.jpg?v=1710154094","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX Thermostatic Oil Cooler Kit, Black - Black - GH GE GR GV - MMOC-WRX-08TBK - Rzcrewgarage","id":1351400915041,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-08TBK.jpg?v=1710154094"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-08TBK.jpg?v=1710154094","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-08TBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2008-2014 Subaru WRX\u003cbr\u003eProven +25°F (+13.9°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation, functions with all stock equipment\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined application-specific sandwich plate\u003cbr\u003eWorks in conjunction with stock liquid-to-liquid heat exchanger for proper fluid warm-up and regulation\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ255\u003cbr\u003eChassis Codes GH, GE ,GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 50°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets and Spacer\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 45-degree and 90-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) 15mm CNC Sandwich Plate Spacer\u003cbr\u003e(1) Application specific M20 Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eHigh oil temperatures can wreak havoc on your high-performance flat four. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2008-2014 Subaru WRX. The WRX has a lot to offer with its turbocharged engine and fantastic AWD system, but these vehicles are not factory-equipped with an oil cooler. Properly regulated oil temperatures become even more important if you have modified your vehicle or spend time tracking your WRX. \u003cbr\u003e\u003cbr\u003eMishimoto's direct-fit oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included CNC-machined aluminum spacer provides ample room for our oil sandwich plate, making this kit compatible with the factory exhaust manifold heat shields. This kit includes preassembled stainless steel lines with -10AN fittings and a thermal reflective wrap that deflects radiant heat from the exhaust. With this setup, your WRX can achieve a 50+°F (34+°C) drop in oil temperatures with minimal pressure loss. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru WRX Oil Cooler Kit is available with a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate, for even greater control over your oil temperatures. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2008-2014 Subaru WRX\u003cbr\u003eProven +25°F (+13.9°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation, functions with all stock equipment\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined application-specific sandwich plate\u003cbr\u003eWorks in conjunction with stock liquid-to-liquid heat exchanger for proper fluid warm-up and regulation\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ255\u003cbr\u003eChassis Codes GH, GE ,GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 50°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets and Spacer\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 45-degree and 90-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) 15mm CNC Sandwich Plate Spacer\u003cbr\u003e(1) Application specific M20 Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eHigh oil temperatures can wreak havoc on your high-performance flat four. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2008-2014 Subaru WRX. The WRX has a lot to offer with its turbocharged engine and fantastic AWD system, but these vehicles are not factory-equipped with an oil cooler. Properly regulated oil temperatures become even more important if you have modified your vehicle or spend time tracking your WRX. \u003cbr\u003e\u003cbr\u003eMishimoto's direct-fit oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included CNC-machined aluminum spacer provides ample room for our oil sandwich plate, making this kit compatible with the factory exhaust manifold heat shields. This kit includes preassembled stainless steel lines with -10AN fittings and a thermal reflective wrap that deflects radiant heat from the exhaust. With this setup, your WRX can achieve a 50+°F (34+°C) drop in oil temperatures with minimal pressure loss. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru WRX Oil Cooler Kit is available with a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate, for even greater control over your oil temperatures. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 5 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561989287963,"title":"Mishimoto - Subaru WRX Thermostatic Oil Cooler Kit - GH GE GR GV - MMOC-WRX-08T","handle":"mishimoto-subaru-wrx-thermostatic-oil-cooler-kit-gh-ge-gr-gv-mmoc-wrx-08t","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-08T\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2008-2014 Subaru WRX\u003cbr\u003eProven +25°F (+13.9°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation, functions with all stock equipment\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined application-specific sandwich plate\u003cbr\u003eWorks in conjunction with stock liquid-to-liquid heat exchanger for proper fluid warm-up and regulation\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ255\u003cbr\u003eChassis Codes GH, GE ,GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 50°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets and Spacer\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 45-degree and 90-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) 15mm CNC Sandwich Plate Spacer\u003cbr\u003e(1) Application specific M20 Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eHigh oil temperatures can wreak havoc on your high-performance flat four. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2008-2014 Subaru WRX. The WRX has a lot to offer with its turbocharged engine and fantastic AWD system, but these vehicles are not factory-equipped with an oil cooler. Properly regulated oil temperatures become even more important if you have modified your vehicle or spend time tracking your WRX. \u003cbr\u003e\u003cbr\u003eMishimoto's direct-fit oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included CNC-machined aluminum spacer provides ample room for our oil sandwich plate, making this kit compatible with the factory exhaust manifold heat shields. This kit includes preassembled stainless steel lines with -10AN fittings and a thermal reflective wrap that deflects radiant heat from the exhaust. With this setup, your WRX can achieve a 50+°F (34+°C) drop in oil temperatures with minimal pressure loss. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru WRX Oil Cooler Kit is available with a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate, for even greater control over your oil temperatures. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2008-2014 Subaru WRX\u003cbr\u003eProven +25°F (+13.9°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation, functions with all stock equipment\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined application-specific sandwich plate\u003cbr\u003eWorks in conjunction with stock liquid-to-liquid heat exchanger for proper fluid warm-up and regulation\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ255\u003cbr\u003eChassis Codes GH, GE ,GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 50°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets and Spacer\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 45-degree and 90-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) 15mm CNC Sandwich Plate Spacer\u003cbr\u003e(1) Application specific M20 Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eHigh oil temperatures can wreak havoc on your high-performance flat four. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2008-2014 Subaru WRX. The WRX has a lot to offer with its turbocharged engine and fantastic AWD system, but these vehicles are not factory-equipped with an oil cooler. Properly regulated oil temperatures become even more important if you have modified your vehicle or spend time tracking your WRX. \u003cbr\u003e\u003cbr\u003eMishimoto's direct-fit oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included CNC-machined aluminum spacer provides ample room for our oil sandwich plate, making this kit compatible with the factory exhaust manifold heat shields. This kit includes preassembled stainless steel lines with -10AN fittings and a thermal reflective wrap that deflects radiant heat from the exhaust. With this setup, your WRX can achieve a 50+°F (34+°C) drop in oil temperatures with minimal pressure loss. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru WRX Oil Cooler Kit is available with a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate, for even greater control over your oil temperatures. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 4 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:44+08:00","created_at":"2018-01-24T23:24:45+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2007","2008","2009","2010","2011","2012","2013","2014","car-specific","cooling","impreza-wrx-hatch-gh6-applied-e-2008-2014-tc-ej255-h4","impreza-wrx-sedan-ge6-applied-e-2008-2014-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-b-2009-2009-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-c-2007-2012-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-c-2010-2012-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-grb-applied-a-2007-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-b-2009-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-c-2010-2012-tc-ej207-h4","impreza-wrx-sti-grb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-grb-applied-e-2013-2014-tc-ej207-h4","impreza-wrx-sti-gvb-applied-c-2007-2012-tc-ej207-h4","impreza-wrx-sti-gvb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-gvb-applied-e-2013-2014-tc-ej207-h4","mishimoto","oil-cooler-kits","oil-coolers","subaru","us1","ws111"],"price":85707,"price_min":85707,"price_max":85707,"available":true,"price_varies":false,"compare_at_price":96300,"compare_at_price_min":96300,"compare_at_price_max":96300,"compare_at_price_varies":false,"variants":[{"id":5990386466843,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-WRX-08T","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX Thermostatic Oil Cooler Kit - GH GE GR GV - MMOC-WRX-08T","public_title":null,"options":["Default Title"],"price":85707,"weight":9216,"compare_at_price":96300,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-08T.jpg?v=1710154094"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-08T.jpg?v=1710154094","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX Thermostatic Oil Cooler Kit - GH GE GR GV - MMOC-WRX-08T - Rzcrewgarage","id":1351400882273,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-08T.jpg?v=1710154094"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-08T.jpg?v=1710154094","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-08T\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2008-2014 Subaru WRX\u003cbr\u003eProven +25°F (+13.9°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation, functions with all stock equipment\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined application-specific sandwich plate\u003cbr\u003eWorks in conjunction with stock liquid-to-liquid heat exchanger for proper fluid warm-up and regulation\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ255\u003cbr\u003eChassis Codes GH, GE ,GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 50°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets and Spacer\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 45-degree and 90-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) 15mm CNC Sandwich Plate Spacer\u003cbr\u003e(1) Application specific M20 Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eHigh oil temperatures can wreak havoc on your high-performance flat four. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2008-2014 Subaru WRX. The WRX has a lot to offer with its turbocharged engine and fantastic AWD system, but these vehicles are not factory-equipped with an oil cooler. Properly regulated oil temperatures become even more important if you have modified your vehicle or spend time tracking your WRX. \u003cbr\u003e\u003cbr\u003eMishimoto's direct-fit oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included CNC-machined aluminum spacer provides ample room for our oil sandwich plate, making this kit compatible with the factory exhaust manifold heat shields. This kit includes preassembled stainless steel lines with -10AN fittings and a thermal reflective wrap that deflects radiant heat from the exhaust. With this setup, your WRX can achieve a 50+°F (34+°C) drop in oil temperatures with minimal pressure loss. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru WRX Oil Cooler Kit is available with a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate, for even greater control over your oil temperatures. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2008-2014 Subaru WRX\u003cbr\u003eProven +25°F (+13.9°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation, functions with all stock equipment\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined application-specific sandwich plate\u003cbr\u003eWorks in conjunction with stock liquid-to-liquid heat exchanger for proper fluid warm-up and regulation\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ255\u003cbr\u003eChassis Codes GH, GE ,GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 50°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets and Spacer\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 45-degree and 90-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) 15mm CNC Sandwich Plate Spacer\u003cbr\u003e(1) Application specific M20 Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eHigh oil temperatures can wreak havoc on your high-performance flat four. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2008-2014 Subaru WRX. The WRX has a lot to offer with its turbocharged engine and fantastic AWD system, but these vehicles are not factory-equipped with an oil cooler. Properly regulated oil temperatures become even more important if you have modified your vehicle or spend time tracking your WRX. \u003cbr\u003e\u003cbr\u003eMishimoto's direct-fit oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included CNC-machined aluminum spacer provides ample room for our oil sandwich plate, making this kit compatible with the factory exhaust manifold heat shields. This kit includes preassembled stainless steel lines with -10AN fittings and a thermal reflective wrap that deflects radiant heat from the exhaust. With this setup, your WRX can achieve a 50+°F (34+°C) drop in oil temperatures with minimal pressure loss. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru WRX Oil Cooler Kit is available with a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate, for even greater control over your oil temperatures. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 4 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561989255195,"title":"Mishimoto - Subaru WRX\/STi Oil Cooler Kit, Black - Black - GDA APPLIED G - MMOC-WRX-06BK","handle":"mishimoto-subaru-wrx-sti-oil-cooler-kit-black-black-gda-applied-g-mmoc-wrx-06bk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-06BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e50+°F (34+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the WRX\u003cbr\u003eCNC-machined spacer for easy install without heat shield removal\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote Will not fit on vehicles equipped with front mount intercoolers.\u003cbr\u003eFits automatic and manual applications.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ255, EJ257\u003cbr\u003eChassis Codes GD\u003cbr\u003ePressure Drop 2 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 2ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 2ft 8in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate (Thermostatic Plate as Option in Drop Down)\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) 2Í Thermashield Silver Braided Line Protector\u003cbr\u003e(1) Black Rubber Protector Square\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eKeep your Hawkeye cool on the street or track with the all-new Mishimoto direct-fit oil cooler kit. A high horsepower Subaru needs a reliable and efficient means of reducing and maintaining proper oil temperatures. High engine temperatures can result in rapid oil degradation and potential engine damage. The Mishimoto oil cooler kit features a large 19-row oil cooler mounted behind the front bumper and grill for optimum airflow and cooling efficiency. This oil cooler kit adds .65 qt to the total oil capacity and substantially reduces temperatures with minimal pressure loss. The Mishimoto direct-fit oil cooler kit is available with a thermostatic sandwich plate for additional oil temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e50+°F (34+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the WRX\u003cbr\u003eCNC-machined spacer for easy install without heat shield removal\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote Will not fit on vehicles equipped with front mount intercoolers.\u003cbr\u003eFits automatic and manual applications.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ255, EJ257\u003cbr\u003eChassis Codes GD\u003cbr\u003ePressure Drop 2 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 2ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 2ft 8in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate (Thermostatic Plate as Option in Drop Down)\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) 2Í Thermashield Silver Braided Line Protector\u003cbr\u003e(1) Black Rubber Protector Square\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eKeep your Hawkeye cool on the street or track with the all-new Mishimoto direct-fit oil cooler kit. A high horsepower Subaru needs a reliable and efficient means of reducing and maintaining proper oil temperatures. High engine temperatures can result in rapid oil degradation and potential engine damage. The Mishimoto oil cooler kit features a large 19-row oil cooler mounted behind the front bumper and grill for optimum airflow and cooling efficiency. This oil cooler kit adds .65 qt to the total oil capacity and substantially reduces temperatures with minimal pressure loss. The Mishimoto direct-fit oil cooler kit is available with a thermostatic sandwich plate for additional oil temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:43+08:00","created_at":"2018-01-24T23:24:44+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2006","2007","car-specific","cooling","impreza-wrx-gda-applied-g-2006-2007-tc-ej207-h4","mishimoto","oil-cooler-kits","oil-coolers","subaru","us1","ws112"],"price":67584,"price_min":67584,"price_max":67584,"available":true,"price_varies":false,"compare_at_price":76800,"compare_at_price_min":76800,"compare_at_price_max":76800,"compare_at_price_varies":false,"variants":[{"id":5990386434075,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-WRX-06BK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX\/STi Oil Cooler Kit, Black - Black - GDA APPLIED G - MMOC-WRX-06BK","public_title":null,"options":["Default Title"],"price":67584,"weight":8808,"compare_at_price":76800,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-06BK.jpg?v=1710154094"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-06BK.jpg?v=1710154094","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX\/STi Oil Cooler Kit, Black - Black - GDA APPLIED G - MMOC-WRX-06BK - Rzcrewgarage","id":1351400849505,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-06BK.jpg?v=1710154094"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-06BK.jpg?v=1710154094","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-06BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e50+°F (34+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the WRX\u003cbr\u003eCNC-machined spacer for easy install without heat shield removal\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote Will not fit on vehicles equipped with front mount intercoolers.\u003cbr\u003eFits automatic and manual applications.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ255, EJ257\u003cbr\u003eChassis Codes GD\u003cbr\u003ePressure Drop 2 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 2ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 2ft 8in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate (Thermostatic Plate as Option in Drop Down)\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) 2Í Thermashield Silver Braided Line Protector\u003cbr\u003e(1) Black Rubber Protector Square\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eKeep your Hawkeye cool on the street or track with the all-new Mishimoto direct-fit oil cooler kit. A high horsepower Subaru needs a reliable and efficient means of reducing and maintaining proper oil temperatures. High engine temperatures can result in rapid oil degradation and potential engine damage. The Mishimoto oil cooler kit features a large 19-row oil cooler mounted behind the front bumper and grill for optimum airflow and cooling efficiency. This oil cooler kit adds .65 qt to the total oil capacity and substantially reduces temperatures with minimal pressure loss. The Mishimoto direct-fit oil cooler kit is available with a thermostatic sandwich plate for additional oil temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e50+°F (34+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the WRX\u003cbr\u003eCNC-machined spacer for easy install without heat shield removal\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote Will not fit on vehicles equipped with front mount intercoolers.\u003cbr\u003eFits automatic and manual applications.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ255, EJ257\u003cbr\u003eChassis Codes GD\u003cbr\u003ePressure Drop 2 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 2ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 2ft 8in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate (Thermostatic Plate as Option in Drop Down)\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) 2Í Thermashield Silver Braided Line Protector\u003cbr\u003e(1) Black Rubber Protector Square\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eKeep your Hawkeye cool on the street or track with the all-new Mishimoto direct-fit oil cooler kit. A high horsepower Subaru needs a reliable and efficient means of reducing and maintaining proper oil temperatures. High engine temperatures can result in rapid oil degradation and potential engine damage. The Mishimoto oil cooler kit features a large 19-row oil cooler mounted behind the front bumper and grill for optimum airflow and cooling efficiency. This oil cooler kit adds .65 qt to the total oil capacity and substantially reduces temperatures with minimal pressure loss. The Mishimoto direct-fit oil cooler kit is available with a thermostatic sandwich plate for additional oil temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561989222427,"title":"Mishimoto - Subaru WRX\/STi Oil Cooler Kit - GDA APPLIED G - MMOC-WRX-06","handle":"mishimoto-subaru-wrx-sti-oil-cooler-kit-gda-applied-g-mmoc-wrx-06","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-06\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e50+°F (34+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the WRX\u003cbr\u003eCNC-machined spacer for easy install without heat shield removal\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote Will not fit on vehicles equipped with front mount intercoolers.\u003cbr\u003eFits automatic and manual applications.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ255, EJ257\u003cbr\u003eChassis Codes GD\u003cbr\u003ePressure Drop 2 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 2ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 2ft 8in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate (Thermostatic Plate as Option in Drop Down)\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) 2Í Thermashield Silver Braided Line Protector\u003cbr\u003e(1) Black Rubber Protector Square\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eKeep your Hawkeye cool on the street or track with the all-new Mishimoto direct-fit oil cooler kit. A high horsepower Subaru needs a reliable and efficient means of reducing and maintaining proper oil temperatures. High engine temperatures can result in rapid oil degradation and potential engine damage. The Mishimoto oil cooler kit features a large 19-row oil cooler mounted behind the front bumper and grill for optimum airflow and cooling efficiency. This oil cooler kit adds .65 qt to the total oil capacity and substantially reduces temperatures with minimal pressure loss. The Mishimoto direct-fit oil cooler kit is available with a thermostatic sandwich plate for additional oil temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e50+°F (34+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the WRX\u003cbr\u003eCNC-machined spacer for easy install without heat shield removal\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote Will not fit on vehicles equipped with front mount intercoolers.\u003cbr\u003eFits automatic and manual applications.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ255, EJ257\u003cbr\u003eChassis Codes GD\u003cbr\u003ePressure Drop 2 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 2ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 2ft 8in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate (Thermostatic Plate as Option in Drop Down)\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) 2Í Thermashield Silver Braided Line Protector\u003cbr\u003e(1) Black Rubber Protector Square\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eKeep your Hawkeye cool on the street or track with the all-new Mishimoto direct-fit oil cooler kit. A high horsepower Subaru needs a reliable and efficient means of reducing and maintaining proper oil temperatures. High engine temperatures can result in rapid oil degradation and potential engine damage. The Mishimoto oil cooler kit features a large 19-row oil cooler mounted behind the front bumper and grill for optimum airflow and cooling efficiency. This oil cooler kit adds .65 qt to the total oil capacity and substantially reduces temperatures with minimal pressure loss. The Mishimoto direct-fit oil cooler kit is available with a thermostatic sandwich plate for additional oil temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:40+08:00","created_at":"2018-01-24T23:24:43+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2006","2007","car-specific","cooling","impreza-wrx-gda-applied-g-2006-2007-tc-ej207-h4","mishimoto","oil-cooler-kits","oil-coolers","subaru","us1","ws112"],"price":67584,"price_min":67584,"price_max":67584,"available":true,"price_varies":false,"compare_at_price":76800,"compare_at_price_min":76800,"compare_at_price_max":76800,"compare_at_price_varies":false,"variants":[{"id":5990386401307,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-WRX-06","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX\/STi Oil Cooler Kit - GDA APPLIED G - MMOC-WRX-06","public_title":null,"options":["Default Title"],"price":67584,"weight":8899,"compare_at_price":76800,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-06.jpg?v=1710154092"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-06.jpg?v=1710154092","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX\/STi Oil Cooler Kit - GDA APPLIED G - MMOC-WRX-06 - Rzcrewgarage","id":1351400816737,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-06.jpg?v=1710154092"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-06.jpg?v=1710154092","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-06\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e50+°F (34+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the WRX\u003cbr\u003eCNC-machined spacer for easy install without heat shield removal\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote Will not fit on vehicles equipped with front mount intercoolers.\u003cbr\u003eFits automatic and manual applications.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ255, EJ257\u003cbr\u003eChassis Codes GD\u003cbr\u003ePressure Drop 2 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 2ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 2ft 8in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate (Thermostatic Plate as Option in Drop Down)\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) 2Í Thermashield Silver Braided Line Protector\u003cbr\u003e(1) Black Rubber Protector Square\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eKeep your Hawkeye cool on the street or track with the all-new Mishimoto direct-fit oil cooler kit. A high horsepower Subaru needs a reliable and efficient means of reducing and maintaining proper oil temperatures. High engine temperatures can result in rapid oil degradation and potential engine damage. The Mishimoto oil cooler kit features a large 19-row oil cooler mounted behind the front bumper and grill for optimum airflow and cooling efficiency. This oil cooler kit adds .65 qt to the total oil capacity and substantially reduces temperatures with minimal pressure loss. The Mishimoto direct-fit oil cooler kit is available with a thermostatic sandwich plate for additional oil temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e50+°F (34+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the WRX\u003cbr\u003eCNC-machined spacer for easy install without heat shield removal\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote Will not fit on vehicles equipped with front mount intercoolers.\u003cbr\u003eFits automatic and manual applications.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ255, EJ257\u003cbr\u003eChassis Codes GD\u003cbr\u003ePressure Drop 2 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 2ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 2ft 8in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate (Thermostatic Plate as Option in Drop Down)\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) 2Í Thermashield Silver Braided Line Protector\u003cbr\u003e(1) Black Rubber Protector Square\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eKeep your Hawkeye cool on the street or track with the all-new Mishimoto direct-fit oil cooler kit. A high horsepower Subaru needs a reliable and efficient means of reducing and maintaining proper oil temperatures. High engine temperatures can result in rapid oil degradation and potential engine damage. The Mishimoto oil cooler kit features a large 19-row oil cooler mounted behind the front bumper and grill for optimum airflow and cooling efficiency. This oil cooler kit adds .65 qt to the total oil capacity and substantially reduces temperatures with minimal pressure loss. The Mishimoto direct-fit oil cooler kit is available with a thermostatic sandwich plate for additional oil temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561989189659,"title":"Mishimoto - Subaru WRX STI Oil Cooler Kit - Black - VAB VAF - MMOC-STI-15BK","handle":"mishimoto-subaru-wrx-sti-oil-cooler-kit-black-vab-vaf-mmoc-sti-15bk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-STI-15BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the 2015+ STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eSleek Silver or Stealth\u003cbr\u003eBlack cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15–25 ft-lb (operating range). Do not exceed the maximum torque rating of 35 ft-lb.\u003cbr\u003eThis oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit.\u003cbr\u003eIt is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes VA\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets \u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 3.5' Stainless Steel Braided Hose with 150° -10AN Fittings\u003cbr\u003e(1) 4' Stainless Steel Braided Hose with 90° and 150° -10AN Fittings\u003cbr\u003e(1) M20 Sandwich Plate (Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru STI Oil Cooler Kit was developed specifically for the 2015 STI and is a great addition to any street or track-driven vehicle. A large Mishimoto 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. \u003cbr\u003e\u003cbr\u003eThe included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This Mishimoto cooler is proven to reduce oil temperatures by 20+°F (16+°C) while maintaining minimal pressure loss. For further heat protection, this Mishimoto Subaru Oil Cooler Kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru STI Oil Cooler Kit can be customized to meet your needs with either a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the 2015+ STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eSleek Silver or Stealth\u003cbr\u003eBlack cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15–25 ft-lb (operating range). Do not exceed the maximum torque rating of 35 ft-lb.\u003cbr\u003eThis oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit.\u003cbr\u003eIt is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes VA\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets \u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 3.5' Stainless Steel Braided Hose with 150° -10AN Fittings\u003cbr\u003e(1) 4' Stainless Steel Braided Hose with 90° and 150° -10AN Fittings\u003cbr\u003e(1) M20 Sandwich Plate (Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru STI Oil Cooler Kit was developed specifically for the 2015 STI and is a great addition to any street or track-driven vehicle. A large Mishimoto 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. \u003cbr\u003e\u003cbr\u003eThe included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This Mishimoto cooler is proven to reduce oil temperatures by 20+°F (16+°C) while maintaining minimal pressure loss. For further heat protection, this Mishimoto Subaru Oil Cooler Kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru STI Oil Cooler Kit can be customized to meet your needs with either a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:39+08:00","created_at":"2018-01-24T23:24:40+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2012","2013","2014","2015","2016","2017","2018","car-specific","cooling","mishimoto","oil-cooler-kits","oil-coolers","subaru","us1","wrx-sti-vab-2014-2018-tc-fa20f-h4","wrx-sti-vaf-2014-2018-tc-fa20f-h4","ws112"],"price":76032,"price_min":76032,"price_max":76032,"available":true,"price_varies":false,"compare_at_price":86400,"compare_at_price_min":86400,"compare_at_price_max":86400,"compare_at_price_varies":false,"variants":[{"id":5990386335771,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-STI-15BK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX STI Oil Cooler Kit - Black - VAB VAF - MMOC-STI-15BK","public_title":null,"options":["Default Title"],"price":76032,"weight":8990,"compare_at_price":86400,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-15BK.jpg?v=1710154092"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-15BK.jpg?v=1710154092","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX STI Oil Cooler Kit - Black - VAB VAF - MMOC-STI-15BK - Rzcrewgarage","id":1351400751201,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-15BK.jpg?v=1710154092"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-15BK.jpg?v=1710154092","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-STI-15BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the 2015+ STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eSleek Silver or Stealth\u003cbr\u003eBlack cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15–25 ft-lb (operating range). Do not exceed the maximum torque rating of 35 ft-lb.\u003cbr\u003eThis oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit.\u003cbr\u003eIt is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes VA\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets \u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 3.5' Stainless Steel Braided Hose with 150° -10AN Fittings\u003cbr\u003e(1) 4' Stainless Steel Braided Hose with 90° and 150° -10AN Fittings\u003cbr\u003e(1) M20 Sandwich Plate (Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru STI Oil Cooler Kit was developed specifically for the 2015 STI and is a great addition to any street or track-driven vehicle. A large Mishimoto 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. \u003cbr\u003e\u003cbr\u003eThe included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This Mishimoto cooler is proven to reduce oil temperatures by 20+°F (16+°C) while maintaining minimal pressure loss. For further heat protection, this Mishimoto Subaru Oil Cooler Kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru STI Oil Cooler Kit can be customized to meet your needs with either a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the 2015+ STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eSleek Silver or Stealth\u003cbr\u003eBlack cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15–25 ft-lb (operating range). Do not exceed the maximum torque rating of 35 ft-lb.\u003cbr\u003eThis oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit.\u003cbr\u003eIt is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes VA\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets \u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 3.5' Stainless Steel Braided Hose with 150° -10AN Fittings\u003cbr\u003e(1) 4' Stainless Steel Braided Hose with 90° and 150° -10AN Fittings\u003cbr\u003e(1) M20 Sandwich Plate (Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru STI Oil Cooler Kit was developed specifically for the 2015 STI and is a great addition to any street or track-driven vehicle. A large Mishimoto 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. \u003cbr\u003e\u003cbr\u003eThe included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This Mishimoto cooler is proven to reduce oil temperatures by 20+°F (16+°C) while maintaining minimal pressure loss. For further heat protection, this Mishimoto Subaru Oil Cooler Kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru STI Oil Cooler Kit can be customized to meet your needs with either a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561989156891,"title":"Mishimoto - Subaru WRX STI Oil Cooler Kit - VAB VAF - MMOC-STI-15","handle":"mishimoto-subaru-wrx-sti-oil-cooler-kit-vab-vaf-mmoc-sti-15","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-STI-15\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the 2015+ STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eSleek Silver or Stealth\u003cbr\u003eBlack cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15–25 ft-lb (operating range). Do not exceed the maximum torque rating of 35 ft-lb.\u003cbr\u003eThis oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit.\u003cbr\u003eIt is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes VA\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets \u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 3.5' Stainless Steel Braided Hose with 150° -10AN Fittings\u003cbr\u003e(1) 4' Stainless Steel Braided Hose with 90° and 150° -10AN Fittings\u003cbr\u003e(1) M20 Sandwich Plate (Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru STI Oil Cooler Kit was developed specifically for the 2015 STI and is a great addition to any street or track-driven vehicle. A large Mishimoto 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. \u003cbr\u003e\u003cbr\u003eThe included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This Mishimoto cooler is proven to reduce oil temperatures by 20+°F (16+°C) while maintaining minimal pressure loss. For further heat protection, this Mishimoto Subaru Oil Cooler Kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru STI Oil Cooler Kit can be customized to meet your needs with either a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the 2015+ STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eSleek Silver or Stealth\u003cbr\u003eBlack cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15–25 ft-lb (operating range). Do not exceed the maximum torque rating of 35 ft-lb.\u003cbr\u003eThis oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit.\u003cbr\u003eIt is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes VA\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets \u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 3.5' Stainless Steel Braided Hose with 150° -10AN Fittings\u003cbr\u003e(1) 4' Stainless Steel Braided Hose with 90° and 150° -10AN Fittings\u003cbr\u003e(1) M20 Sandwich Plate (Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru STI Oil Cooler Kit was developed specifically for the 2015 STI and is a great addition to any street or track-driven vehicle. A large Mishimoto 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. \u003cbr\u003e\u003cbr\u003eThe included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This Mishimoto cooler is proven to reduce oil temperatures by 20+°F (16+°C) while maintaining minimal pressure loss. For further heat protection, this Mishimoto Subaru Oil Cooler Kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru STI Oil Cooler Kit can be customized to meet your needs with either a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:38+08:00","created_at":"2018-01-24T23:24:39+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2012","2013","2014","2015","2016","2017","2018","car-specific","cooling","mishimoto","oil-cooler-kits","oil-coolers","subaru","us1","wrx-sti-vab-2014-2018-tc-fa20f-h4","wrx-sti-vaf-2014-2018-tc-fa20f-h4","ws112"],"price":76032,"price_min":76032,"price_max":76032,"available":true,"price_varies":false,"compare_at_price":86400,"compare_at_price_min":86400,"compare_at_price_max":86400,"compare_at_price_varies":false,"variants":[{"id":5990386303003,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-STI-15","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX STI Oil Cooler Kit - VAB VAF - MMOC-STI-15","public_title":null,"options":["Default Title"],"price":76032,"weight":9035,"compare_at_price":86400,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-15.jpg?v=1710154092"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-15.jpg?v=1710154092","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX STI Oil Cooler Kit - VAB VAF - MMOC-STI-15 - Rzcrewgarage","id":1351400718433,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-15.jpg?v=1710154092"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-15.jpg?v=1710154092","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-STI-15\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the 2015+ STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eSleek Silver or Stealth\u003cbr\u003eBlack cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15–25 ft-lb (operating range). Do not exceed the maximum torque rating of 35 ft-lb.\u003cbr\u003eThis oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit.\u003cbr\u003eIt is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes VA\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets \u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 3.5' Stainless Steel Braided Hose with 150° -10AN Fittings\u003cbr\u003e(1) 4' Stainless Steel Braided Hose with 90° and 150° -10AN Fittings\u003cbr\u003e(1) M20 Sandwich Plate (Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru STI Oil Cooler Kit was developed specifically for the 2015 STI and is a great addition to any street or track-driven vehicle. A large Mishimoto 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. \u003cbr\u003e\u003cbr\u003eThe included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This Mishimoto cooler is proven to reduce oil temperatures by 20+°F (16+°C) while maintaining minimal pressure loss. For further heat protection, this Mishimoto Subaru Oil Cooler Kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru STI Oil Cooler Kit can be customized to meet your needs with either a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the 2015+ STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eSleek Silver or Stealth\u003cbr\u003eBlack cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15–25 ft-lb (operating range). Do not exceed the maximum torque rating of 35 ft-lb.\u003cbr\u003eThis oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit.\u003cbr\u003eIt is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes VA\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets \u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 3.5' Stainless Steel Braided Hose with 150° -10AN Fittings\u003cbr\u003e(1) 4' Stainless Steel Braided Hose with 90° and 150° -10AN Fittings\u003cbr\u003e(1) M20 Sandwich Plate (Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru STI Oil Cooler Kit was developed specifically for the 2015 STI and is a great addition to any street or track-driven vehicle. A large Mishimoto 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. \u003cbr\u003e\u003cbr\u003eThe included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This Mishimoto cooler is proven to reduce oil temperatures by 20+°F (16+°C) while maintaining minimal pressure loss. For further heat protection, this Mishimoto Subaru Oil Cooler Kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru STI Oil Cooler Kit can be customized to meet your needs with either a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561987747867,"title":"Mishimoto - Subaru WRX Thermostatic Oil Cooler Kit - Black - VAG - MMOC-WRX-15TBK","handle":"mishimoto-subaru-wrx-thermostatic-oil-cooler-kit-black-vag-mmoc-wrx-15tbk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-15TBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX\u003cbr\u003eProven 20+°F (11.1+°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined aluminum spacer for the oil sandwich plate\u003cbr\u003eSilicone hose bypasses stock liquid-to-liquid heat exchanger\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 25°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets\u003cbr\u003e(1) Application-Specific Oil Sandwich Plate\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings \u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20 x M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Large O-Ring\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is expanding their line of 2015 WRX parts! High oil temperatures can wreak havoc on your high-performance 2015 WRX FA20 DIT. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2015+ Subaru WRX. The 2015 WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock 2015 WRX liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit is designed to work in conjunction with the stock liquid-to-liquid to maintain optimal oil temperature. Properly regulated oil temperatures becomes even more important if you have modified your vehicle or spend time tracking your 2015 WRX. Mishimoto's direct-fit 2015 WRX oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific CNC-machined aluminum sandwich plate has been designed to allow proper clearance of the stock oil filter. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your 2015 WRX can achieve a +25°F (+13.9°C) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our 2015 WRX parts, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX\u003cbr\u003eProven 20+°F (11.1+°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined aluminum spacer for the oil sandwich plate\u003cbr\u003eSilicone hose bypasses stock liquid-to-liquid heat exchanger\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 25°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets\u003cbr\u003e(1) Application-Specific Oil Sandwich Plate\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings \u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20 x M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Large O-Ring\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is expanding their line of 2015 WRX parts! High oil temperatures can wreak havoc on your high-performance 2015 WRX FA20 DIT. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2015+ Subaru WRX. The 2015 WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock 2015 WRX liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit is designed to work in conjunction with the stock liquid-to-liquid to maintain optimal oil temperature. Properly regulated oil temperatures becomes even more important if you have modified your vehicle or spend time tracking your 2015 WRX. Mishimoto's direct-fit 2015 WRX oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific CNC-machined aluminum sandwich plate has been designed to allow proper clearance of the stock oil filter. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your 2015 WRX can achieve a +25°F (+13.9°C) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our 2015 WRX parts, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:26+08:00","created_at":"2018-01-24T23:24:27+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2014","2015","2016","2017","2018","car-specific","cooling","mishimoto","oil-cooler-kits","oil-coolers","subaru","us1","wrx-s4-vag-applied-a-2014-2015-tc-fa20f-h4","wrx-s4-vag-applied-b-2015-2016-tc-fa20f-h4","wrx-s4-vag-applied-c-2016-2018-tc-fa20f-h4","ws110"],"price":109620,"price_min":109620,"price_max":109620,"available":true,"price_varies":false,"compare_at_price":121800,"compare_at_price_min":121800,"compare_at_price_max":121800,"compare_at_price_varies":false,"variants":[{"id":5990384500763,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-WRX-15TBK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX Thermostatic Oil Cooler Kit - Black - VAG - MMOC-WRX-15TBK","public_title":null,"options":["Default Title"],"price":109620,"weight":9488,"compare_at_price":121800,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-15TBK.jpg?v=1710154082"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-15TBK.jpg?v=1710154082","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX Thermostatic Oil Cooler Kit - Black - VAG - MMOC-WRX-15TBK - Rzcrewgarage","id":1351400357985,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-15TBK.jpg?v=1710154082"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-15TBK.jpg?v=1710154082","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-15TBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX\u003cbr\u003eProven 20+°F (11.1+°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined aluminum spacer for the oil sandwich plate\u003cbr\u003eSilicone hose bypasses stock liquid-to-liquid heat exchanger\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 25°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets\u003cbr\u003e(1) Application-Specific Oil Sandwich Plate\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings \u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20 x M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Large O-Ring\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is expanding their line of 2015 WRX parts! High oil temperatures can wreak havoc on your high-performance 2015 WRX FA20 DIT. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2015+ Subaru WRX. The 2015 WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock 2015 WRX liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit is designed to work in conjunction with the stock liquid-to-liquid to maintain optimal oil temperature. Properly regulated oil temperatures becomes even more important if you have modified your vehicle or spend time tracking your 2015 WRX. Mishimoto's direct-fit 2015 WRX oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific CNC-machined aluminum sandwich plate has been designed to allow proper clearance of the stock oil filter. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your 2015 WRX can achieve a +25°F (+13.9°C) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our 2015 WRX parts, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX\u003cbr\u003eProven 20+°F (11.1+°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined aluminum spacer for the oil sandwich plate\u003cbr\u003eSilicone hose bypasses stock liquid-to-liquid heat exchanger\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 25°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets\u003cbr\u003e(1) Application-Specific Oil Sandwich Plate\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings \u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20 x M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Large O-Ring\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is expanding their line of 2015 WRX parts! High oil temperatures can wreak havoc on your high-performance 2015 WRX FA20 DIT. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2015+ Subaru WRX. The 2015 WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock 2015 WRX liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit is designed to work in conjunction with the stock liquid-to-liquid to maintain optimal oil temperature. Properly regulated oil temperatures becomes even more important if you have modified your vehicle or spend time tracking your 2015 WRX. Mishimoto's direct-fit 2015 WRX oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific CNC-machined aluminum sandwich plate has been designed to allow proper clearance of the stock oil filter. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your 2015 WRX can achieve a +25°F (+13.9°C) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our 2015 WRX parts, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561987715099,"title":"Mishimoto - Subaru WRX Thermostatic Oil Cooler Kit - VAG - MMOC-WRX-15T","handle":"mishimoto-subaru-wrx-thermostatic-oil-cooler-kit-vag-mmoc-wrx-15t","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-15T\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX\u003cbr\u003eProven 20+°F (11.1+°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined aluminum spacer for the oil sandwich plate\u003cbr\u003eSilicone hose bypasses stock liquid-to-liquid heat exchanger\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 25°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets\u003cbr\u003e(1) Application-Specific Oil Sandwich Plate\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings \u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20 x M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Large O-Ring\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is expanding their line of 2015 WRX parts! High oil temperatures can wreak havoc on your high-performance 2015 WRX FA20 DIT. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2015+ Subaru WRX. The 2015 WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock 2015 WRX liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit is designed to work in conjunction with the stock liquid-to-liquid to maintain optimal oil temperature. Properly regulated oil temperatures becomes even more important if you have modified your vehicle or spend time tracking your 2015 WRX. Mishimoto's direct-fit 2015 WRX oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific CNC-machined aluminum sandwich plate has been designed to allow proper clearance of the stock oil filter. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your 2015 WRX can achieve a +25°F (+13.9°C) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our 2015 WRX parts, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX\u003cbr\u003eProven 20+°F (11.1+°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined aluminum spacer for the oil sandwich plate\u003cbr\u003eSilicone hose bypasses stock liquid-to-liquid heat exchanger\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 25°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets\u003cbr\u003e(1) Application-Specific Oil Sandwich Plate\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings \u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20 x M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Large O-Ring\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is expanding their line of 2015 WRX parts! High oil temperatures can wreak havoc on your high-performance 2015 WRX FA20 DIT. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2015+ Subaru WRX. The 2015 WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock 2015 WRX liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit is designed to work in conjunction with the stock liquid-to-liquid to maintain optimal oil temperature. Properly regulated oil temperatures becomes even more important if you have modified your vehicle or spend time tracking your 2015 WRX. Mishimoto's direct-fit 2015 WRX oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific CNC-machined aluminum sandwich plate has been designed to allow proper clearance of the stock oil filter. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your 2015 WRX can achieve a +25°F (+13.9°C) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our 2015 WRX parts, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:25+08:00","created_at":"2018-01-24T23:24:26+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2014","2015","2016","2017","2018","car-specific","cooling","mishimoto","oil-cooler-kits","oil-coolers","subaru","us1","wrx-s4-vag-applied-a-2014-2015-tc-fa20f-h4","wrx-s4-vag-applied-b-2015-2016-tc-fa20f-h4","wrx-s4-vag-applied-c-2016-2018-tc-fa20f-h4","ws110"],"price":109620,"price_min":109620,"price_max":109620,"available":true,"price_varies":false,"compare_at_price":121800,"compare_at_price_min":121800,"compare_at_price_max":121800,"compare_at_price_varies":false,"variants":[{"id":5990384467995,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-WRX-15T","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX Thermostatic Oil Cooler Kit - VAG - MMOC-WRX-15T","public_title":null,"options":["Default Title"],"price":109620,"weight":9488,"compare_at_price":121800,"inventory_quantity":16,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-15T.jpg?v=1710154082"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-15T.jpg?v=1710154082","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX Thermostatic Oil Cooler Kit - VAG - MMOC-WRX-15T - Rzcrewgarage","id":1351400325217,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-15T.jpg?v=1710154082"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-15T.jpg?v=1710154082","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-15T\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX\u003cbr\u003eProven 20+°F (11.1+°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined aluminum spacer for the oil sandwich plate\u003cbr\u003eSilicone hose bypasses stock liquid-to-liquid heat exchanger\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 25°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets\u003cbr\u003e(1) Application-Specific Oil Sandwich Plate\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings \u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20 x M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Large O-Ring\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is expanding their line of 2015 WRX parts! High oil temperatures can wreak havoc on your high-performance 2015 WRX FA20 DIT. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2015+ Subaru WRX. The 2015 WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock 2015 WRX liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit is designed to work in conjunction with the stock liquid-to-liquid to maintain optimal oil temperature. Properly regulated oil temperatures becomes even more important if you have modified your vehicle or spend time tracking your 2015 WRX. Mishimoto's direct-fit 2015 WRX oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific CNC-machined aluminum sandwich plate has been designed to allow proper clearance of the stock oil filter. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your 2015 WRX can achieve a +25°F (+13.9°C) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our 2015 WRX parts, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX\u003cbr\u003eProven 20+°F (11.1+°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined aluminum spacer for the oil sandwich plate\u003cbr\u003eSilicone hose bypasses stock liquid-to-liquid heat exchanger\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 25°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets\u003cbr\u003e(1) Application-Specific Oil Sandwich Plate\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings \u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20 x M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Large O-Ring\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is expanding their line of 2015 WRX parts! High oil temperatures can wreak havoc on your high-performance 2015 WRX FA20 DIT. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2015+ Subaru WRX. The 2015 WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock 2015 WRX liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit is designed to work in conjunction with the stock liquid-to-liquid to maintain optimal oil temperature. Properly regulated oil temperatures becomes even more important if you have modified your vehicle or spend time tracking your 2015 WRX. Mishimoto's direct-fit 2015 WRX oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific CNC-machined aluminum sandwich plate has been designed to allow proper clearance of the stock oil filter. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your 2015 WRX can achieve a +25°F (+13.9°C) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our 2015 WRX parts, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561987616795,"title":"Mishimoto - Subaru BRZ Thermostatic Oil Cooler Kit, Black - Black - ZC6 - MMOC-BRZ-13TBK","handle":"mishimoto-subaru-brz-thermostatic-oil-cooler-kit-black-black-zc6-mmoc-brz-13tbk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-BRZ-13TBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:21+08:00","created_at":"2018-01-24T23:24:22+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2012","2013","2014","2015","2016","2017","2018","brz-zc6-applied-a-2012-2013-na-fa20d-h4","brz-zc6-applied-b-2013-2014-na-fa20d-h4","brz-zc6-applied-c-2014-2015-na-fa20d-h4","car-specific","cooling","mishimoto","oil-cooler-kits","oil-coolers","subaru","us1","ws111"],"price":102083,"price_min":102083,"price_max":102083,"available":true,"price_varies":false,"compare_at_price":114700,"compare_at_price_min":114700,"compare_at_price_max":114700,"compare_at_price_varies":false,"variants":[{"id":5990384369691,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-BRZ-13TBK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru BRZ Thermostatic Oil Cooler Kit, Black - Black - ZC6 - MMOC-BRZ-13TBK","public_title":null,"options":["Default Title"],"price":102083,"weight":10123,"compare_at_price":114700,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13TBK.jpg?v=1710154081"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13TBK.jpg?v=1710154081","options":["Title"],"media":[{"alt":"Mishimoto - Subaru BRZ Thermostatic Oil Cooler Kit, Black - Black - ZC6 - MMOC-BRZ-13TBK - Rzcrewgarage","id":1351400194145,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13TBK.jpg?v=1710154081"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13TBK.jpg?v=1710154081","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-BRZ-13TBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561987584027,"title":"Mishimoto - Subaru BRZ Thermostatic Oil Cooler Kit - ZC6 - MMOC-BRZ-13T","handle":"mishimoto-subaru-brz-thermostatic-oil-cooler-kit-zc6-mmoc-brz-13t","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-BRZ-13T\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:20+08:00","created_at":"2018-01-24T23:24:21+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2012","2013","2014","2015","2016","2017","2018","brz-zc6-applied-a-2012-2013-na-fa20d-h4","brz-zc6-applied-b-2013-2014-na-fa20d-h4","brz-zc6-applied-c-2014-2015-na-fa20d-h4","car-specific","cooling","mishimoto","oil-cooler-kits","oil-coolers","subaru","us1","ws111"],"price":102083,"price_min":102083,"price_max":102083,"available":true,"price_varies":false,"compare_at_price":114700,"compare_at_price_min":114700,"compare_at_price_max":114700,"compare_at_price_varies":false,"variants":[{"id":5990384336923,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-BRZ-13T","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru BRZ Thermostatic Oil Cooler Kit - ZC6 - MMOC-BRZ-13T","public_title":null,"options":["Default Title"],"price":102083,"weight":10260,"compare_at_price":114700,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13T.jpg?v=1710154080"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13T.jpg?v=1710154080","options":["Title"],"media":[{"alt":"Mishimoto - Subaru BRZ Thermostatic Oil Cooler Kit - ZC6 - MMOC-BRZ-13T - Rzcrewgarage","id":1351400161377,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13T.jpg?v=1710154080"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13T.jpg?v=1710154080","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-BRZ-13T\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561986371611,"title":"Mishimoto - Subaru WRX STI Oil Cooler Kit - Black - VAB VAF - MMOC-STI-15TBK","handle":"mishimoto-subaru-wrx-sti-oil-cooler-kit-black-vab-vaf-mmoc-sti-15tbk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-STI-15TBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the 2015+ STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eSleek Silver or Stealth\u003cbr\u003eBlack cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15–25 ft-lb (operating range). Do not exceed the maximum torque rating of 35 ft-lb.\u003cbr\u003eThis oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit.\u003cbr\u003eIt is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes VA\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets \u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 3.5' Stainless Steel Braided Hose with 150° -10AN Fittings\u003cbr\u003e(1) 4' Stainless Steel Braided Hose with 90° and 150° -10AN Fittings\u003cbr\u003e(1) M20 Sandwich Plate (Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru STI Oil Cooler Kit was developed specifically for the 2015 STI and is a great addition to any street or track-driven vehicle. A large Mishimoto 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. \u003cbr\u003e\u003cbr\u003eThe included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This Mishimoto cooler is proven to reduce oil temperatures by 20+°F (16+°C) while maintaining minimal pressure loss. For further heat protection, this Mishimoto Subaru Oil Cooler Kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru STI Oil Cooler Kit can be customized to meet your needs with either a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the 2015+ STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eSleek Silver or Stealth\u003cbr\u003eBlack cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15–25 ft-lb (operating range). Do not exceed the maximum torque rating of 35 ft-lb.\u003cbr\u003eThis oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit.\u003cbr\u003eIt is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes VA\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets \u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 3.5' Stainless Steel Braided Hose with 150° -10AN Fittings\u003cbr\u003e(1) 4' Stainless Steel Braided Hose with 90° and 150° -10AN Fittings\u003cbr\u003e(1) M20 Sandwich Plate (Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru STI Oil Cooler Kit was developed specifically for the 2015 STI and is a great addition to any street or track-driven vehicle. A large Mishimoto 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. \u003cbr\u003e\u003cbr\u003eThe included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This Mishimoto cooler is proven to reduce oil temperatures by 20+°F (16+°C) while maintaining minimal pressure loss. For further heat protection, this Mishimoto Subaru Oil Cooler Kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru STI Oil Cooler Kit can be customized to meet your needs with either a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:13+08:00","created_at":"2018-01-24T23:24:13+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2012","2013","2014","2015","2016","2017","2018","car-specific","cooling","mishimoto","oil-cooler-kits","oil-coolers","subaru","us1","wrx-sti-vab-2014-2018-tc-fa20f-h4","wrx-sti-vaf-2014-2018-tc-fa20f-h4","ws110"],"price":83700,"price_min":83700,"price_max":83700,"available":true,"price_varies":false,"compare_at_price":93000,"compare_at_price_min":93000,"compare_at_price_max":93000,"compare_at_price_varies":false,"variants":[{"id":5990383058971,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-STI-15TBK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX STI Oil Cooler Kit - Black - VAB VAF - MMOC-STI-15TBK","public_title":null,"options":["Default Title"],"price":83700,"weight":9171,"compare_at_price":93000,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-15TBK.jpg?v=1710154077"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-15TBK.jpg?v=1710154077","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX STI Oil Cooler Kit - Black - VAB VAF - MMOC-STI-15TBK - Rzcrewgarage","id":1351399800929,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-15TBK.jpg?v=1710154077"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-15TBK.jpg?v=1710154077","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-STI-15TBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the 2015+ STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eSleek Silver or Stealth\u003cbr\u003eBlack cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15–25 ft-lb (operating range). Do not exceed the maximum torque rating of 35 ft-lb.\u003cbr\u003eThis oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit.\u003cbr\u003eIt is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes VA\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets \u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 3.5' Stainless Steel Braided Hose with 150° -10AN Fittings\u003cbr\u003e(1) 4' Stainless Steel Braided Hose with 90° and 150° -10AN Fittings\u003cbr\u003e(1) M20 Sandwich Plate (Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru STI Oil Cooler Kit was developed specifically for the 2015 STI and is a great addition to any street or track-driven vehicle. A large Mishimoto 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. \u003cbr\u003e\u003cbr\u003eThe included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This Mishimoto cooler is proven to reduce oil temperatures by 20+°F (16+°C) while maintaining minimal pressure loss. For further heat protection, this Mishimoto Subaru Oil Cooler Kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru STI Oil Cooler Kit can be customized to meet your needs with either a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the 2015+ STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eSleek Silver or Stealth\u003cbr\u003eBlack cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15–25 ft-lb (operating range). Do not exceed the maximum torque rating of 35 ft-lb.\u003cbr\u003eThis oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit.\u003cbr\u003eIt is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes VA\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets \u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 3.5' Stainless Steel Braided Hose with 150° -10AN Fittings\u003cbr\u003e(1) 4' Stainless Steel Braided Hose with 90° and 150° -10AN Fittings\u003cbr\u003e(1) M20 Sandwich Plate (Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru STI Oil Cooler Kit was developed specifically for the 2015 STI and is a great addition to any street or track-driven vehicle. A large Mishimoto 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. \u003cbr\u003e\u003cbr\u003eThe included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This Mishimoto cooler is proven to reduce oil temperatures by 20+°F (16+°C) while maintaining minimal pressure loss. For further heat protection, this Mishimoto Subaru Oil Cooler Kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru STI Oil Cooler Kit can be customized to meet your needs with either a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561986338843,"title":"Mishimoto - Subaru WRX STI Oil Cooler Kit - VAB VAF - MMOC-STI-15T","handle":"mishimoto-subaru-wrx-sti-oil-cooler-kit-vab-vaf-mmoc-sti-15t","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-STI-15T\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the 2015+ STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eSleek Silver or Stealth\u003cbr\u003eBlack cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15–25 ft-lb (operating range). Do not exceed the maximum torque rating of 35 ft-lb.\u003cbr\u003eThis oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit.\u003cbr\u003eIt is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes VA\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets \u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 3.5' Stainless Steel Braided Hose with 150° -10AN Fittings\u003cbr\u003e(1) 4' Stainless Steel Braided Hose with 90° and 150° -10AN Fittings\u003cbr\u003e(1) M20 Sandwich Plate (Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru STI Oil Cooler Kit was developed specifically for the 2015 STI and is a great addition to any street or track-driven vehicle. A large Mishimoto 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. \u003cbr\u003e\u003cbr\u003eThe included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This Mishimoto cooler is proven to reduce oil temperatures by 20+°F (16+°C) while maintaining minimal pressure loss. For further heat protection, this Mishimoto Subaru Oil Cooler Kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru STI Oil Cooler Kit can be customized to meet your needs with either a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the 2015+ STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eSleek Silver or Stealth\u003cbr\u003eBlack cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15–25 ft-lb (operating range). Do not exceed the maximum torque rating of 35 ft-lb.\u003cbr\u003eThis oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit.\u003cbr\u003eIt is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes VA\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets \u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 3.5' Stainless Steel Braided Hose with 150° -10AN Fittings\u003cbr\u003e(1) 4' Stainless Steel Braided Hose with 90° and 150° -10AN Fittings\u003cbr\u003e(1) M20 Sandwich Plate (Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru STI Oil Cooler Kit was developed specifically for the 2015 STI and is a great addition to any street or track-driven vehicle. A large Mishimoto 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. \u003cbr\u003e\u003cbr\u003eThe included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This Mishimoto cooler is proven to reduce oil temperatures by 20+°F (16+°C) while maintaining minimal pressure loss. For further heat protection, this Mishimoto Subaru Oil Cooler Kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru STI Oil Cooler Kit can be customized to meet your needs with either a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:12+08:00","created_at":"2018-01-24T23:24:12+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2012","2013","2014","2015","2016","2017","2018","car-specific","cooling","mishimoto","oil-cooler-kits","oil-coolers","subaru","us1","wrx-sti-vab-2014-2018-tc-fa20f-h4","wrx-sti-vaf-2014-2018-tc-fa20f-h4","ws110"],"price":83700,"price_min":83700,"price_max":83700,"available":true,"price_varies":false,"compare_at_price":93000,"compare_at_price_min":93000,"compare_at_price_max":93000,"compare_at_price_varies":false,"variants":[{"id":5990383026203,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-STI-15T","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX STI Oil Cooler Kit - VAB VAF - MMOC-STI-15T","public_title":null,"options":["Default Title"],"price":83700,"weight":9262,"compare_at_price":93000,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-15T.jpg?v=1710154077"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-15T.jpg?v=1710154077","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX STI Oil Cooler Kit - VAB VAF - MMOC-STI-15T - Rzcrewgarage","id":1351399768161,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-15T.jpg?v=1710154077"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-15T.jpg?v=1710154077","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-STI-15T\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the 2015+ STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eSleek Silver or Stealth\u003cbr\u003eBlack cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15–25 ft-lb (operating range). Do not exceed the maximum torque rating of 35 ft-lb.\u003cbr\u003eThis oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit.\u003cbr\u003eIt is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes VA\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets \u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 3.5' Stainless Steel Braided Hose with 150° -10AN Fittings\u003cbr\u003e(1) 4' Stainless Steel Braided Hose with 90° and 150° -10AN Fittings\u003cbr\u003e(1) M20 Sandwich Plate (Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru STI Oil Cooler Kit was developed specifically for the 2015 STI and is a great addition to any street or track-driven vehicle. A large Mishimoto 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. \u003cbr\u003e\u003cbr\u003eThe included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This Mishimoto cooler is proven to reduce oil temperatures by 20+°F (16+°C) while maintaining minimal pressure loss. For further heat protection, this Mishimoto Subaru Oil Cooler Kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru STI Oil Cooler Kit can be customized to meet your needs with either a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the 2015+ STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eSleek Silver or Stealth\u003cbr\u003eBlack cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15–25 ft-lb (operating range). Do not exceed the maximum torque rating of 35 ft-lb.\u003cbr\u003eThis oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit.\u003cbr\u003eIt is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes VA\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets \u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 3.5' Stainless Steel Braided Hose with 150° -10AN Fittings\u003cbr\u003e(1) 4' Stainless Steel Braided Hose with 90° and 150° -10AN Fittings\u003cbr\u003e(1) M20 Sandwich Plate (Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru STI Oil Cooler Kit was developed specifically for the 2015 STI and is a great addition to any street or track-driven vehicle. A large Mishimoto 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. \u003cbr\u003e\u003cbr\u003eThe included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This Mishimoto cooler is proven to reduce oil temperatures by 20+°F (16+°C) while maintaining minimal pressure loss. For further heat protection, this Mishimoto Subaru Oil Cooler Kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru STI Oil Cooler Kit can be customized to meet your needs with either a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561986306075,"title":"Mishimoto - Subaru WRX STI Thermostatic Oil Cooler Kit, Black - Black - GRB GVB GRF GVF - MMOC-STI-08TBK","handle":"mishimoto-subaru-wrx-sti-thermostatic-oil-cooler-kit-black-black-grb-gvb-grf-gvf-mmoc-sti-08tbk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-STI-08TBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 5 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:09+08:00","created_at":"2018-01-24T23:24:11+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2007","2008","2009","2010","2011","2012","2013","2014","car-specific","cooling","impreza-wrx-sti-a-line-grf-applied-b-2009-2009-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-c-2007-2012-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-c-2010-2012-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-grb-applied-a-2007-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-b-2009-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-c-2010-2012-tc-ej207-h4","impreza-wrx-sti-grb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-grb-applied-e-2013-2014-tc-ej207-h4","impreza-wrx-sti-gvb-applied-c-2007-2012-tc-ej207-h4","impreza-wrx-sti-gvb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-gvb-applied-e-2013-2014-tc-ej207-h4","mishimoto","oil-cooler-kits","oil-coolers","subaru","us1","ws111"],"price":80011,"price_min":80011,"price_max":80011,"available":true,"price_varies":false,"compare_at_price":89900,"compare_at_price_min":89900,"compare_at_price_max":89900,"compare_at_price_varies":false,"variants":[{"id":5990382960667,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-STI-08TBK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX STI Thermostatic Oil Cooler Kit, Black - Black - GRB GVB GRF GVF - MMOC-STI-08TBK","public_title":null,"options":["Default Title"],"price":80011,"weight":9126,"compare_at_price":89900,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08TBK.jpg?v=1710154075"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08TBK.jpg?v=1710154075","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX STI Thermostatic Oil Cooler Kit, Black - Black - GRB GVB GRF GVF - MMOC-STI-08TBK - Rzcrewgarage","id":1351399735393,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08TBK.jpg?v=1710154075"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08TBK.jpg?v=1710154075","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-STI-08TBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 5 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561986273307,"title":"Mishimoto - Subaru WRX STI Thermostatic Oil Cooler Kit - GRB GVB GRF GVF - MMOC-STI-08T","handle":"mishimoto-subaru-wrx-sti-thermostatic-oil-cooler-kit-grb-gvb-grf-gvf-mmoc-sti-08t","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-STI-08T\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:09+08:00","created_at":"2018-01-24T23:24:09+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2007","2008","2009","2010","2011","2012","2013","2014","car-specific","cooling","impreza-wrx-sti-a-line-grf-applied-b-2009-2009-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-c-2007-2012-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-c-2010-2012-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-grb-applied-a-2007-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-b-2009-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-c-2010-2012-tc-ej207-h4","impreza-wrx-sti-grb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-grb-applied-e-2013-2014-tc-ej207-h4","impreza-wrx-sti-gvb-applied-c-2007-2012-tc-ej207-h4","impreza-wrx-sti-gvb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-gvb-applied-e-2013-2014-tc-ej207-h4","mishimoto","oil-cooler-kits","oil-coolers","subaru","us1","ws111"],"price":80011,"price_min":80011,"price_max":80011,"available":true,"price_varies":false,"compare_at_price":89900,"compare_at_price_min":89900,"compare_at_price_max":89900,"compare_at_price_varies":false,"variants":[{"id":5990382927899,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-STI-08T","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX STI Thermostatic Oil Cooler Kit - GRB GVB GRF GVF - MMOC-STI-08T","public_title":null,"options":["Default Title"],"price":80011,"weight":9171,"compare_at_price":89900,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08T.jpg?v=1710154075"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08T.jpg?v=1710154075","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX STI Thermostatic Oil Cooler Kit - GRB GVB GRF GVF - MMOC-STI-08T - Rzcrewgarage","id":1351399669857,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08T.jpg?v=1710154075"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08T.jpg?v=1710154075","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-STI-08T\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561986240539,"title":"Mishimoto - Subaru WRX STI Oil Cooler Kit, Black - Black - GRB GVB GRF GVF - MMOC-STI-08BK","handle":"mishimoto-subaru-wrx-sti-oil-cooler-kit-black-black-grb-gvb-grf-gvf-mmoc-sti-08bk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-STI-08BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:08+08:00","created_at":"2018-01-24T23:24:08+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2007","2008","2009","2010","2011","2012","2013","2014","car-specific","cooling","impreza-wrx-sti-a-line-grf-applied-b-2009-2009-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-c-2007-2012-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-c-2010-2012-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-grb-applied-a-2007-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-b-2009-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-c-2010-2012-tc-ej207-h4","impreza-wrx-sti-grb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-grb-applied-e-2013-2014-tc-ej207-h4","impreza-wrx-sti-gvb-applied-c-2007-2012-tc-ej207-h4","impreza-wrx-sti-gvb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-gvb-applied-e-2013-2014-tc-ej207-h4","mishimoto","oil-cooler-kits","oil-coolers","subaru","us1","ws112"],"price":73216,"price_min":73216,"price_max":73216,"available":true,"price_varies":false,"compare_at_price":83200,"compare_at_price_min":83200,"compare_at_price_max":83200,"compare_at_price_varies":false,"variants":[{"id":5990382895131,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-STI-08BK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX STI Oil Cooler Kit, Black - Black - GRB GVB GRF GVF - MMOC-STI-08BK","public_title":null,"options":["Default Title"],"price":73216,"weight":8853,"compare_at_price":83200,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08BK.jpg?v=1710154075"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08BK.jpg?v=1710154075","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX STI Oil Cooler Kit, Black - Black - GRB GVB GRF GVF - MMOC-STI-08BK - Rzcrewgarage","id":1351399571553,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08BK.jpg?v=1710154075"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08BK.jpg?v=1710154075","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-STI-08BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561986207771,"title":"Mishimoto - Subaru WRX STI Oil Cooler Kit - GRB GVB GRF GVF - MMOC-STI-08","handle":"mishimoto-subaru-wrx-sti-oil-cooler-kit-grb-gvb-grf-gvf-mmoc-sti-08","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-STI-08\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 5 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:07+08:00","created_at":"2018-01-24T23:24:07+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2007","2008","2009","2010","2011","2012","2013","2014","car-specific","cooling","impreza-wrx-sti-a-line-grf-applied-b-2009-2009-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-c-2007-2012-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-c-2010-2012-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-grb-applied-a-2007-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-b-2009-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-c-2010-2012-tc-ej207-h4","impreza-wrx-sti-grb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-grb-applied-e-2013-2014-tc-ej207-h4","impreza-wrx-sti-gvb-applied-c-2007-2012-tc-ej207-h4","impreza-wrx-sti-gvb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-gvb-applied-e-2013-2014-tc-ej207-h4","mishimoto","oil-cooler-kits","oil-coolers","subaru","us1","ws112"],"price":73216,"price_min":73216,"price_max":73216,"available":true,"price_varies":false,"compare_at_price":83200,"compare_at_price_min":83200,"compare_at_price_max":83200,"compare_at_price_varies":false,"variants":[{"id":5990382862363,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-STI-08","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX STI Oil Cooler Kit - GRB GVB GRF GVF - MMOC-STI-08","public_title":null,"options":["Default Title"],"price":73216,"weight":8990,"compare_at_price":83200,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08.jpg?v=1710154075"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08.jpg?v=1710154075","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX STI Oil Cooler Kit - GRB GVB GRF GVF - MMOC-STI-08 - Rzcrewgarage","id":1351399440481,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08.jpg?v=1710154075"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08.jpg?v=1710154075","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-STI-08\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 5 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561985880091,"title":"Mishimoto - Subaru BRZ Oil Cooler Kit, Black - Black - ZC6 - MMOC-BRZ-13BK","handle":"mishimoto-subaru-brz-oil-cooler-kit-black-black-zc6-mmoc-brz-13bk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-BRZ-13BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:23:59+08:00","created_at":"2018-01-24T23:24:00+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2012","2013","2014","2015","2016","2017","2018","brz-zc6-applied-a-2012-2013-na-fa20d-h4","brz-zc6-applied-b-2013-2014-na-fa20d-h4","brz-zc6-applied-c-2014-2015-na-fa20d-h4","car-specific","cooling","mishimoto","oil-cooler-kits","oil-coolers","subaru","us1","ws112"],"price":94688,"price_min":94688,"price_max":94688,"available":true,"price_varies":false,"compare_at_price":107600,"compare_at_price_min":107600,"compare_at_price_max":107600,"compare_at_price_varies":false,"variants":[{"id":5990381584411,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-BRZ-13BK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru BRZ Oil Cooler Kit, Black - Black - ZC6 - MMOC-BRZ-13BK","public_title":null,"options":["Default Title"],"price":94688,"weight":10033,"compare_at_price":107600,"inventory_quantity":16,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13BK.jpg?v=1710154066"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13BK.jpg?v=1710154066","options":["Title"],"media":[{"alt":"Mishimoto - Subaru BRZ Oil Cooler Kit, Black - Black - ZC6 - MMOC-BRZ-13BK - Rzcrewgarage","id":1351399145569,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13BK.jpg?v=1710154066"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13BK.jpg?v=1710154066","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-BRZ-13BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561985847323,"title":"Mishimoto - Subaru BRZ Oil Cooler Kit - ZC6 - MMOC-BRZ-13","handle":"mishimoto-subaru-brz-oil-cooler-kit-zc6-mmoc-brz-13","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-BRZ-13\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:23:58+08:00","created_at":"2018-01-24T23:23:59+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2012","2013","2014","2015","2016","2017","2018","brz-zc6-applied-a-2012-2013-na-fa20d-h4","brz-zc6-applied-b-2013-2014-na-fa20d-h4","brz-zc6-applied-c-2014-2015-na-fa20d-h4","car-specific","cooling","mishimoto","oil-cooler-kits","oil-coolers","subaru","us1","ws112"],"price":94688,"price_min":94688,"price_max":94688,"available":true,"price_varies":false,"compare_at_price":107600,"compare_at_price_min":107600,"compare_at_price_max":107600,"compare_at_price_varies":false,"variants":[{"id":5990381551643,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-BRZ-13","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru BRZ Oil Cooler Kit - ZC6 - MMOC-BRZ-13","public_title":null,"options":["Default Title"],"price":94688,"weight":10169,"compare_at_price":107600,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13.jpg?v=1710154066"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13.jpg?v=1710154066","options":["Title"],"media":[{"alt":"Mishimoto - Subaru BRZ Oil Cooler Kit - ZC6 - MMOC-BRZ-13 - Rzcrewgarage","id":1351399112801,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13.jpg?v=1710154066"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-BRZ-13.jpg?v=1710154066","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-BRZ-13\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2013+ Scion FR-S and Subaru BRZ\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eCNC-machined aluminum spacers for the oil sandwich plate\u003cbr\u003eIncreases oil capacity by .65 qt\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20\u003cbr\u003eChassis Codes ZN6, ZC6\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Application Specific Mounting Bracket\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 3ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4ft 2in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate\u003cbr\u003e(2) 6061 Aluminum CNC Sandwich Plate Spacers, Black\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(2) 1\/8\" NPT Plugs\u003cbr\u003e(3) O-rings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new direct-fit oil cooler kit specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling – perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L.\u003cbr\u003e\u003cbr\u003eThis kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kit substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control. It is also a perfect complement to the Mishimoto Subaru BRZ \/ Scion FR-S Performance Aluminum Radiator and the Mishimoto Silicone Radiator Hose Kit for the ultimate cooling solution for your vehicle. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with your choice of Stealth Black or Sleek Silver coolers and includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561984471067,"title":"Mishimoto - Subaru WRX and STI Thermostatic Oil Cooler Kit, Black - Black - GDA GDB APPLIED C to E - MMOC-WRX-01TBK","handle":"mishimoto-subaru-wrx-and-sti-thermostatic-oil-cooler-kit-black-black-gda-gdb-applied-c-to-e-mmoc-wrx-01tbk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-01TBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eProvides Dramatic Temperature Drop\u003cbr\u003e2 psi pressure loss\u003cbr\u003eDirect fit for the 06-07 WRX\/STI\u003cbr\u003eThermostatic option available\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 2.76\"\u003cbr\u003eRows 10 Cooler Construction Stacked-plate \u003cbr\u003eNote Requires trimming of exhaust heat shield for proper installation. Will not fit on vehicles equipped with front mount intercoolers. Fits automatic and manual applications.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ205, EJ255\u003cbr\u003eChassis Codes GD\u003cbr\u003ePressure Drop 1-2 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.5 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application Specific Mounting Brackets \u003cbr\u003e(1) 10-Row Oil Cooler\u003cbr\u003e(1) 3' Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4' 4\" Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate (Thermostatic Option Available)\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Black Rubber Seal\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you have a rally-inspired WRX or a built STI, maintaining ideal oil temperatures is necessary for both optimal performance and engine longevity. Treat your flat-four to a dose of reliability with the Mishimoto Subaru WRX\/STI Direct-Fit Oil Cooler Kit. This kit includes precision engineered application-specific mounting brackets, premade stainless steel braided oil lines, a billet oil sandwich plate, an efficient 10-row stacked-plate Mishimoto oil cooler, and all necessary hardware. \u003cbr\u003e\u003cbr\u003eThis kit provides .5 qt of additional oil capacity and reduces temperatures by more than 20°F (16°C) while providing minimal pressure loss. This kit is available with the Mishimoto standard Oil Sandwich Plate or the Mishimoto Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control and optimal performance in any environment. For additional customization this kit is available with your choice of either a Sleek Silver or Stealth Black cooler. \u003cbr\u003e\u003cbr\u003eThis kit is the perfect complement to the Mishimoto Subaru WRX\/STI Performance Aluminum Radiator, Performance Aluminum Fan Shroud Kit, and Silicone Radiator Hose Kit for the ultimate cooling solution for your Subaru. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eProvides Dramatic Temperature Drop\u003cbr\u003e2 psi pressure loss\u003cbr\u003eDirect fit for the 06-07 WRX\/STI\u003cbr\u003eThermostatic option available\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 2.76\"\u003cbr\u003eRows 10 Cooler Construction Stacked-plate \u003cbr\u003eNote Requires trimming of exhaust heat shield for proper installation. Will not fit on vehicles equipped with front mount intercoolers. Fits automatic and manual applications.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ205, EJ255\u003cbr\u003eChassis Codes GD\u003cbr\u003ePressure Drop 1-2 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.5 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application Specific Mounting Brackets \u003cbr\u003e(1) 10-Row Oil Cooler\u003cbr\u003e(1) 3' Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4' 4\" Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate (Thermostatic Option Available)\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Black Rubber Seal\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you have a rally-inspired WRX or a built STI, maintaining ideal oil temperatures is necessary for both optimal performance and engine longevity. Treat your flat-four to a dose of reliability with the Mishimoto Subaru WRX\/STI Direct-Fit Oil Cooler Kit. This kit includes precision engineered application-specific mounting brackets, premade stainless steel braided oil lines, a billet oil sandwich plate, an efficient 10-row stacked-plate Mishimoto oil cooler, and all necessary hardware. \u003cbr\u003e\u003cbr\u003eThis kit provides .5 qt of additional oil capacity and reduces temperatures by more than 20°F (16°C) while providing minimal pressure loss. This kit is available with the Mishimoto standard Oil Sandwich Plate or the Mishimoto Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control and optimal performance in any environment. For additional customization this kit is available with your choice of either a Sleek Silver or Stealth Black cooler. \u003cbr\u003e\u003cbr\u003eThis kit is the perfect complement to the Mishimoto Subaru WRX\/STI Performance Aluminum Radiator, Performance Aluminum Fan Shroud Kit, and Silicone Radiator Hose Kit for the ultimate cooling solution for your Subaru. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:23:48+08:00","created_at":"2018-01-24T23:23:48+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2002","2003","2004","2005","car-specific","cooling","impreza-wrx-gda-applied-c-2002-2003-tc-ej207-h4","impreza-wrx-gda-applied-d-2003-2004-tc-ej207-h4","impreza-wrx-gda-applied-e-2004-2005-tc-ej207-h4","impreza-wrx-sti-gdb-applied-c-2002-2003-tc-ej207-h4","impreza-wrx-sti-gdb-applied-d-2003-2004-tc-ej207-h4","impreza-wrx-sti-gdb-applied-e-2004-2005-tc-ej207-h4","mishimoto","oil-cooler-kits","oil-coolers","subaru","us1","ws110"],"price":71550,"price_min":71550,"price_max":71550,"available":true,"price_varies":false,"compare_at_price":79500,"compare_at_price_min":79500,"compare_at_price_max":79500,"compare_at_price_varies":false,"variants":[{"id":5990380109851,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-WRX-01TBK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX and STI Thermostatic Oil Cooler Kit, Black - Black - GDA GDB APPLIED C to E - MMOC-WRX-01TBK","public_title":null,"options":["Default Title"],"price":71550,"weight":8899,"compare_at_price":79500,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-01TBK.jpg?v=1710154060"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-01TBK.jpg?v=1710154060","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX and STI Thermostatic Oil Cooler Kit, Black - Black - GDA GDB APPLIED C to E - MMOC-WRX-01TBK - Rzcrewgarage","id":1351398686817,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-01TBK.jpg?v=1710154060"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-01TBK.jpg?v=1710154060","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-01TBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eProvides Dramatic Temperature Drop\u003cbr\u003e2 psi pressure loss\u003cbr\u003eDirect fit for the 06-07 WRX\/STI\u003cbr\u003eThermostatic option available\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 2.76\"\u003cbr\u003eRows 10 Cooler Construction Stacked-plate \u003cbr\u003eNote Requires trimming of exhaust heat shield for proper installation. Will not fit on vehicles equipped with front mount intercoolers. Fits automatic and manual applications.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ205, EJ255\u003cbr\u003eChassis Codes GD\u003cbr\u003ePressure Drop 1-2 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.5 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application Specific Mounting Brackets \u003cbr\u003e(1) 10-Row Oil Cooler\u003cbr\u003e(1) 3' Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4' 4\" Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate (Thermostatic Option Available)\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Black Rubber Seal\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you have a rally-inspired WRX or a built STI, maintaining ideal oil temperatures is necessary for both optimal performance and engine longevity. Treat your flat-four to a dose of reliability with the Mishimoto Subaru WRX\/STI Direct-Fit Oil Cooler Kit. This kit includes precision engineered application-specific mounting brackets, premade stainless steel braided oil lines, a billet oil sandwich plate, an efficient 10-row stacked-plate Mishimoto oil cooler, and all necessary hardware. \u003cbr\u003e\u003cbr\u003eThis kit provides .5 qt of additional oil capacity and reduces temperatures by more than 20°F (16°C) while providing minimal pressure loss. This kit is available with the Mishimoto standard Oil Sandwich Plate or the Mishimoto Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control and optimal performance in any environment. For additional customization this kit is available with your choice of either a Sleek Silver or Stealth Black cooler. \u003cbr\u003e\u003cbr\u003eThis kit is the perfect complement to the Mishimoto Subaru WRX\/STI Performance Aluminum Radiator, Performance Aluminum Fan Shroud Kit, and Silicone Radiator Hose Kit for the ultimate cooling solution for your Subaru. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eProvides Dramatic Temperature Drop\u003cbr\u003e2 psi pressure loss\u003cbr\u003eDirect fit for the 06-07 WRX\/STI\u003cbr\u003eThermostatic option available\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 2.76\"\u003cbr\u003eRows 10 Cooler Construction Stacked-plate \u003cbr\u003eNote Requires trimming of exhaust heat shield for proper installation. Will not fit on vehicles equipped with front mount intercoolers. Fits automatic and manual applications.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ205, EJ255\u003cbr\u003eChassis Codes GD\u003cbr\u003ePressure Drop 1-2 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.5 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application Specific Mounting Brackets \u003cbr\u003e(1) 10-Row Oil Cooler\u003cbr\u003e(1) 3' Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4' 4\" Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate (Thermostatic Option Available)\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Black Rubber Seal\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you have a rally-inspired WRX or a built STI, maintaining ideal oil temperatures is necessary for both optimal performance and engine longevity. Treat your flat-four to a dose of reliability with the Mishimoto Subaru WRX\/STI Direct-Fit Oil Cooler Kit. This kit includes precision engineered application-specific mounting brackets, premade stainless steel braided oil lines, a billet oil sandwich plate, an efficient 10-row stacked-plate Mishimoto oil cooler, and all necessary hardware. \u003cbr\u003e\u003cbr\u003eThis kit provides .5 qt of additional oil capacity and reduces temperatures by more than 20°F (16°C) while providing minimal pressure loss. This kit is available with the Mishimoto standard Oil Sandwich Plate or the Mishimoto Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control and optimal performance in any environment. For additional customization this kit is available with your choice of either a Sleek Silver or Stealth Black cooler. \u003cbr\u003e\u003cbr\u003eThis kit is the perfect complement to the Mishimoto Subaru WRX\/STI Performance Aluminum Radiator, Performance Aluminum Fan Shroud Kit, and Silicone Radiator Hose Kit for the ultimate cooling solution for your Subaru. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561984438299,"title":"Mishimoto - Subaru WRX and STI Thermostatic Oil Cooler Kit - GDA GDB APPLIED C to E - MMOC-WRX-01T","handle":"mishimoto-subaru-wrx-and-sti-thermostatic-oil-cooler-kit-gda-gdb-applied-c-to-e-mmoc-wrx-01t","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-01T\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eProvides Dramatic Temperature Drop\u003cbr\u003e2 psi pressure loss\u003cbr\u003eDirect fit for the 06-07 WRX\/STI\u003cbr\u003eThermostatic option available\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 2.76\"\u003cbr\u003eRows 10 Cooler Construction Stacked-plate \u003cbr\u003eNote Requires trimming of exhaust heat shield for proper installation. Will not fit on vehicles equipped with front mount intercoolers. Fits automatic and manual applications.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ205, EJ255\u003cbr\u003eChassis Codes GD\u003cbr\u003ePressure Drop 1-2 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.5 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application Specific Mounting Brackets \u003cbr\u003e(1) 10-Row Oil Cooler\u003cbr\u003e(1) 3' Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4' 4\" Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate (Thermostatic Option Available)\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Black Rubber Seal\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you have a rally-inspired WRX or a built STI, maintaining ideal oil temperatures is necessary for both optimal performance and engine longevity. Treat your flat-four to a dose of reliability with the Mishimoto Subaru WRX\/STI Direct-Fit Oil Cooler Kit. This kit includes precision engineered application-specific mounting brackets, premade stainless steel braided oil lines, a billet oil sandwich plate, an efficient 10-row stacked-plate Mishimoto oil cooler, and all necessary hardware. \u003cbr\u003e\u003cbr\u003eThis kit provides .5 qt of additional oil capacity and reduces temperatures by more than 20°F (16°C) while providing minimal pressure loss. This kit is available with the Mishimoto standard Oil Sandwich Plate or the Mishimoto Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control and optimal performance in any environment. For additional customization this kit is available with your choice of either a Sleek Silver or Stealth Black cooler. \u003cbr\u003e\u003cbr\u003eThis kit is the perfect complement to the Mishimoto Subaru WRX\/STI Performance Aluminum Radiator, Performance Aluminum Fan Shroud Kit, and Silicone Radiator Hose Kit for the ultimate cooling solution for your Subaru. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eProvides Dramatic Temperature Drop\u003cbr\u003e2 psi pressure loss\u003cbr\u003eDirect fit for the 06-07 WRX\/STI\u003cbr\u003eThermostatic option available\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 2.76\"\u003cbr\u003eRows 10 Cooler Construction Stacked-plate \u003cbr\u003eNote Requires trimming of exhaust heat shield for proper installation. Will not fit on vehicles equipped with front mount intercoolers. Fits automatic and manual applications.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ205, EJ255\u003cbr\u003eChassis Codes GD\u003cbr\u003ePressure Drop 1-2 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.5 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application Specific Mounting Brackets \u003cbr\u003e(1) 10-Row Oil Cooler\u003cbr\u003e(1) 3' Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4' 4\" Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate (Thermostatic Option Available)\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Black Rubber Seal\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you have a rally-inspired WRX or a built STI, maintaining ideal oil temperatures is necessary for both optimal performance and engine longevity. Treat your flat-four to a dose of reliability with the Mishimoto Subaru WRX\/STI Direct-Fit Oil Cooler Kit. This kit includes precision engineered application-specific mounting brackets, premade stainless steel braided oil lines, a billet oil sandwich plate, an efficient 10-row stacked-plate Mishimoto oil cooler, and all necessary hardware. \u003cbr\u003e\u003cbr\u003eThis kit provides .5 qt of additional oil capacity and reduces temperatures by more than 20°F (16°C) while providing minimal pressure loss. This kit is available with the Mishimoto standard Oil Sandwich Plate or the Mishimoto Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control and optimal performance in any environment. For additional customization this kit is available with your choice of either a Sleek Silver or Stealth Black cooler. \u003cbr\u003e\u003cbr\u003eThis kit is the perfect complement to the Mishimoto Subaru WRX\/STI Performance Aluminum Radiator, Performance Aluminum Fan Shroud Kit, and Silicone Radiator Hose Kit for the ultimate cooling solution for your Subaru. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:23:47+08:00","created_at":"2018-01-24T23:23:47+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2002","2003","2004","2005","car-specific","cooling","impreza-wrx-gda-applied-c-2002-2003-tc-ej207-h4","impreza-wrx-gda-applied-d-2003-2004-tc-ej207-h4","impreza-wrx-gda-applied-e-2004-2005-tc-ej207-h4","impreza-wrx-sti-gdb-applied-c-2002-2003-tc-ej207-h4","impreza-wrx-sti-gdb-applied-d-2003-2004-tc-ej207-h4","impreza-wrx-sti-gdb-applied-e-2004-2005-tc-ej207-h4","mishimoto","oil-cooler-kits","oil-coolers","subaru","us1","ws110"],"price":71550,"price_min":71550,"price_max":71550,"available":true,"price_varies":false,"compare_at_price":79500,"compare_at_price_min":79500,"compare_at_price_max":79500,"compare_at_price_varies":false,"variants":[{"id":5990380077083,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-WRX-01T","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX and STI Thermostatic Oil Cooler Kit - GDA GDB APPLIED C to E - MMOC-WRX-01T","public_title":null,"options":["Default Title"],"price":71550,"weight":9171,"compare_at_price":79500,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-01T.jpg?v=1710154060"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-01T.jpg?v=1710154060","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX and STI Thermostatic Oil Cooler Kit - GDA GDB APPLIED C to E - MMOC-WRX-01T - Rzcrewgarage","id":1351398654049,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-01T.jpg?v=1710154060"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-01T.jpg?v=1710154060","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-01T\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eProvides Dramatic Temperature Drop\u003cbr\u003e2 psi pressure loss\u003cbr\u003eDirect fit for the 06-07 WRX\/STI\u003cbr\u003eThermostatic option available\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 2.76\"\u003cbr\u003eRows 10 Cooler Construction Stacked-plate \u003cbr\u003eNote Requires trimming of exhaust heat shield for proper installation. Will not fit on vehicles equipped with front mount intercoolers. Fits automatic and manual applications.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ205, EJ255\u003cbr\u003eChassis Codes GD\u003cbr\u003ePressure Drop 1-2 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.5 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application Specific Mounting Brackets \u003cbr\u003e(1) 10-Row Oil Cooler\u003cbr\u003e(1) 3' Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4' 4\" Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate (Thermostatic Option Available)\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Black Rubber Seal\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you have a rally-inspired WRX or a built STI, maintaining ideal oil temperatures is necessary for both optimal performance and engine longevity. Treat your flat-four to a dose of reliability with the Mishimoto Subaru WRX\/STI Direct-Fit Oil Cooler Kit. This kit includes precision engineered application-specific mounting brackets, premade stainless steel braided oil lines, a billet oil sandwich plate, an efficient 10-row stacked-plate Mishimoto oil cooler, and all necessary hardware. \u003cbr\u003e\u003cbr\u003eThis kit provides .5 qt of additional oil capacity and reduces temperatures by more than 20°F (16°C) while providing minimal pressure loss. This kit is available with the Mishimoto standard Oil Sandwich Plate or the Mishimoto Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control and optimal performance in any environment. For additional customization this kit is available with your choice of either a Sleek Silver or Stealth Black cooler. \u003cbr\u003e\u003cbr\u003eThis kit is the perfect complement to the Mishimoto Subaru WRX\/STI Performance Aluminum Radiator, Performance Aluminum Fan Shroud Kit, and Silicone Radiator Hose Kit for the ultimate cooling solution for your Subaru. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eProvides Dramatic Temperature Drop\u003cbr\u003e2 psi pressure loss\u003cbr\u003eDirect fit for the 06-07 WRX\/STI\u003cbr\u003eThermostatic option available\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 2.76\"\u003cbr\u003eRows 10 Cooler Construction Stacked-plate \u003cbr\u003eNote Requires trimming of exhaust heat shield for proper installation. Will not fit on vehicles equipped with front mount intercoolers. Fits automatic and manual applications.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ205, EJ255\u003cbr\u003eChassis Codes GD\u003cbr\u003ePressure Drop 1-2 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.5 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application Specific Mounting Brackets \u003cbr\u003e(1) 10-Row Oil Cooler\u003cbr\u003e(1) 3' Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4' 4\" Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate (Thermostatic Option Available)\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Black Rubber Seal\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you have a rally-inspired WRX or a built STI, maintaining ideal oil temperatures is necessary for both optimal performance and engine longevity. Treat your flat-four to a dose of reliability with the Mishimoto Subaru WRX\/STI Direct-Fit Oil Cooler Kit. This kit includes precision engineered application-specific mounting brackets, premade stainless steel braided oil lines, a billet oil sandwich plate, an efficient 10-row stacked-plate Mishimoto oil cooler, and all necessary hardware. \u003cbr\u003e\u003cbr\u003eThis kit provides .5 qt of additional oil capacity and reduces temperatures by more than 20°F (16°C) while providing minimal pressure loss. This kit is available with the Mishimoto standard Oil Sandwich Plate or the Mishimoto Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control and optimal performance in any environment. For additional customization this kit is available with your choice of either a Sleek Silver or Stealth Black cooler. \u003cbr\u003e\u003cbr\u003eThis kit is the perfect complement to the Mishimoto Subaru WRX\/STI Performance Aluminum Radiator, Performance Aluminum Fan Shroud Kit, and Silicone Radiator Hose Kit for the ultimate cooling solution for your Subaru. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561984405531,"title":"Mishimoto - Subaru WRX and STI Oil Cooler Kit, Black - Black - GDA GDB APPLIED C to E - MMOC-WRX-01BK","handle":"mishimoto-subaru-wrx-and-sti-oil-cooler-kit-black-black-gda-gdb-applied-c-to-e-mmoc-wrx-01bk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-01BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eProvides Dramatic Temperature Drop\u003cbr\u003e2 psi pressure loss\u003cbr\u003eDirect fit for the 06-07 WRX\/STI\u003cbr\u003eThermostatic option available\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 2.76\"\u003cbr\u003eRows 10 Cooler Construction Stacked-plate \u003cbr\u003eNote Requires trimming of exhaust heat shield for proper installation. Will not fit on vehicles equipped with front mount intercoolers. Fits automatic and manual applications.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ205, EJ255\u003cbr\u003eChassis Codes GD\u003cbr\u003ePressure Drop 1-2 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.5 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application Specific Mounting Brackets \u003cbr\u003e(1) 10-Row Oil Cooler\u003cbr\u003e(1) 3' Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4' 4\" Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate (Thermostatic Option Available)\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Black Rubber Seal\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you have a rally-inspired WRX or a built STI, maintaining ideal oil temperatures is necessary for both optimal performance and engine longevity. Treat your flat-four to a dose of reliability with the Mishimoto Subaru WRX\/STI Direct-Fit Oil Cooler Kit. This kit includes precision engineered application-specific mounting brackets, premade stainless steel braided oil lines, a billet oil sandwich plate, an efficient 10-row stacked-plate Mishimoto oil cooler, and all necessary hardware. \u003cbr\u003e\u003cbr\u003eThis kit provides .5 qt of additional oil capacity and reduces temperatures by more than 20°F (16°C) while providing minimal pressure loss. This kit is available with the Mishimoto standard Oil Sandwich Plate or the Mishimoto Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control and optimal performance in any environment. For additional customization this kit is available with your choice of either a Sleek Silver or Stealth Black cooler. \u003cbr\u003e\u003cbr\u003eThis kit is the perfect complement to the Mishimoto Subaru WRX\/STI Performance Aluminum Radiator, Performance Aluminum Fan Shroud Kit, and Silicone Radiator Hose Kit for the ultimate cooling solution for your Subaru. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eProvides Dramatic Temperature Drop\u003cbr\u003e2 psi pressure loss\u003cbr\u003eDirect fit for the 06-07 WRX\/STI\u003cbr\u003eThermostatic option available\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 2.76\"\u003cbr\u003eRows 10 Cooler Construction Stacked-plate \u003cbr\u003eNote Requires trimming of exhaust heat shield for proper installation. Will not fit on vehicles equipped with front mount intercoolers. Fits automatic and manual applications.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ205, EJ255\u003cbr\u003eChassis Codes GD\u003cbr\u003ePressure Drop 1-2 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.5 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application Specific Mounting Brackets \u003cbr\u003e(1) 10-Row Oil Cooler\u003cbr\u003e(1) 3' Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4' 4\" Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate (Thermostatic Option Available)\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Black Rubber Seal\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you have a rally-inspired WRX or a built STI, maintaining ideal oil temperatures is necessary for both optimal performance and engine longevity. Treat your flat-four to a dose of reliability with the Mishimoto Subaru WRX\/STI Direct-Fit Oil Cooler Kit. This kit includes precision engineered application-specific mounting brackets, premade stainless steel braided oil lines, a billet oil sandwich plate, an efficient 10-row stacked-plate Mishimoto oil cooler, and all necessary hardware. \u003cbr\u003e\u003cbr\u003eThis kit provides .5 qt of additional oil capacity and reduces temperatures by more than 20°F (16°C) while providing minimal pressure loss. This kit is available with the Mishimoto standard Oil Sandwich Plate or the Mishimoto Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control and optimal performance in any environment. For additional customization this kit is available with your choice of either a Sleek Silver or Stealth Black cooler. \u003cbr\u003e\u003cbr\u003eThis kit is the perfect complement to the Mishimoto Subaru WRX\/STI Performance Aluminum Radiator, Performance Aluminum Fan Shroud Kit, and Silicone Radiator Hose Kit for the ultimate cooling solution for your Subaru. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:23:46+08:00","created_at":"2018-01-24T23:23:47+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2002","2003","2004","2005","car-specific","cooling","impreza-wrx-gda-applied-c-2002-2003-tc-ej207-h4","impreza-wrx-gda-applied-d-2003-2004-tc-ej207-h4","impreza-wrx-gda-applied-e-2004-2005-tc-ej207-h4","impreza-wrx-sti-gdb-applied-c-2002-2003-tc-ej207-h4","impreza-wrx-sti-gdb-applied-d-2003-2004-tc-ej207-h4","impreza-wrx-sti-gdb-applied-e-2004-2005-tc-ej207-h4","mishimoto","oil-cooler-kits","oil-coolers","subaru","us1","ws112"],"price":63360,"price_min":63360,"price_max":63360,"available":true,"price_varies":false,"compare_at_price":72000,"compare_at_price_min":72000,"compare_at_price_max":72000,"compare_at_price_varies":false,"variants":[{"id":5990380044315,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-WRX-01BK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX and STI Oil Cooler Kit, Black - Black - GDA GDB APPLIED C to E - MMOC-WRX-01BK","public_title":null,"options":["Default Title"],"price":63360,"weight":8808,"compare_at_price":72000,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-01BK.jpg?v=1710154058"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-01BK.jpg?v=1710154058","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX and STI Oil Cooler Kit, Black - Black - GDA GDB APPLIED C to E - MMOC-WRX-01BK - Rzcrewgarage","id":1351398621281,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-01BK.jpg?v=1710154058"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-01BK.jpg?v=1710154058","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-01BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eProvides Dramatic Temperature Drop\u003cbr\u003e2 psi pressure loss\u003cbr\u003eDirect fit for the 06-07 WRX\/STI\u003cbr\u003eThermostatic option available\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 2.76\"\u003cbr\u003eRows 10 Cooler Construction Stacked-plate \u003cbr\u003eNote Requires trimming of exhaust heat shield for proper installation. Will not fit on vehicles equipped with front mount intercoolers. Fits automatic and manual applications.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ205, EJ255\u003cbr\u003eChassis Codes GD\u003cbr\u003ePressure Drop 1-2 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.5 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application Specific Mounting Brackets \u003cbr\u003e(1) 10-Row Oil Cooler\u003cbr\u003e(1) 3' Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4' 4\" Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate (Thermostatic Option Available)\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Black Rubber Seal\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you have a rally-inspired WRX or a built STI, maintaining ideal oil temperatures is necessary for both optimal performance and engine longevity. Treat your flat-four to a dose of reliability with the Mishimoto Subaru WRX\/STI Direct-Fit Oil Cooler Kit. This kit includes precision engineered application-specific mounting brackets, premade stainless steel braided oil lines, a billet oil sandwich plate, an efficient 10-row stacked-plate Mishimoto oil cooler, and all necessary hardware. \u003cbr\u003e\u003cbr\u003eThis kit provides .5 qt of additional oil capacity and reduces temperatures by more than 20°F (16°C) while providing minimal pressure loss. This kit is available with the Mishimoto standard Oil Sandwich Plate or the Mishimoto Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control and optimal performance in any environment. For additional customization this kit is available with your choice of either a Sleek Silver or Stealth Black cooler. \u003cbr\u003e\u003cbr\u003eThis kit is the perfect complement to the Mishimoto Subaru WRX\/STI Performance Aluminum Radiator, Performance Aluminum Fan Shroud Kit, and Silicone Radiator Hose Kit for the ultimate cooling solution for your Subaru. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eProvides Dramatic Temperature Drop\u003cbr\u003e2 psi pressure loss\u003cbr\u003eDirect fit for the 06-07 WRX\/STI\u003cbr\u003eThermostatic option available\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 2.76\"\u003cbr\u003eRows 10 Cooler Construction Stacked-plate \u003cbr\u003eNote Requires trimming of exhaust heat shield for proper installation. Will not fit on vehicles equipped with front mount intercoolers. Fits automatic and manual applications.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ205, EJ255\u003cbr\u003eChassis Codes GD\u003cbr\u003ePressure Drop 1-2 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.5 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application Specific Mounting Brackets \u003cbr\u003e(1) 10-Row Oil Cooler\u003cbr\u003e(1) 3' Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 4' 4\" Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate (Thermostatic Option Available)\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Black Rubber Seal\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you have a rally-inspired WRX or a built STI, maintaining ideal oil temperatures is necessary for both optimal performance and engine longevity. Treat your flat-four to a dose of reliability with the Mishimoto Subaru WRX\/STI Direct-Fit Oil Cooler Kit. This kit includes precision engineered application-specific mounting brackets, premade stainless steel braided oil lines, a billet oil sandwich plate, an efficient 10-row stacked-plate Mishimoto oil cooler, and all necessary hardware. \u003cbr\u003e\u003cbr\u003eThis kit provides .5 qt of additional oil capacity and reduces temperatures by more than 20°F (16°C) while providing minimal pressure loss. This kit is available with the Mishimoto standard Oil Sandwich Plate or the Mishimoto Oil Sandwich Plate with Rear-Mounted Thermostat for additional oil temperature control and optimal performance in any environment. For additional customization this kit is available with your choice of either a Sleek Silver or Stealth Black cooler. \u003cbr\u003e\u003cbr\u003eThis kit is the perfect complement to the Mishimoto Subaru WRX\/STI Performance Aluminum Radiator, Performance Aluminum Fan Shroud Kit, and Silicone Radiator Hose Kit for the ultimate cooling solution for your Subaru. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}