Rear

{"id":6684632481974,"title":"Spoon - Zero Bump Steer Kit Rear - Honda - S2000 AP1\/AP2","handle":"spoon-zero-bump-steer-kit-rear-honda-ap1-ap2-52220-ap1-020","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cbr\u003eBy installing it, bump steer during lowdown is reduced and sudden toe changes are suppressed.\nAs a result, the roll becomes natural and smooth cornering is achieved.\nThe angle of the lower arm is corrected, the roll center is optimized, and the straightness is also improved.\n* Since the vehicle height will drop after installation, please use the official harmonic drive damper when installing.\u003cbr\u003e\n---\u003cbr\u003e\u003cbr\u003e\nRemarks \u0026amp; special notes\u003cbr\u003e\nGenuine ratio + 8mm * This product is a competition-only part and cannot be used on public roads. Please use it on a closed course such as a circuit.\u003cbr\u003e\u003cbr\u003e\n* Be sure to adjust the alignment after mounting.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eS2000 | AP1 | 1999-2003 | NA | F20C | I4\u003cbr\u003eS2000 | AP2 | 2003-2009 | NA | F22C | I4\u003c!--split--\u003e","published_at":"2021-04-30T13:05:03+08:00","created_at":"2021-04-30T13:05:05+08:00","vendor":"Spoon","type":"Camber Kits and Alignement","tags":["1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","camber-kits-and-alignement","honda","jp1","rear","roll-center-adjuster","s2000-ap1-1999-2003-na-f20c-i4","s2000-ap2-2003-2009-na-f22c-i4","spoon","ws15"],"price":20425,"price_min":20425,"price_max":20425,"available":true,"price_varies":false,"compare_at_price":21500,"compare_at_price_min":21500,"compare_at_price_max":21500,"compare_at_price_varies":false,"variants":[{"id":39664001351862,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"52220-AP1-020","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon - Zero Bump Steer Kit Rear - Honda - S2000 AP1\/AP2","public_title":null,"options":["Default Title"],"price":20425,"weight":1000,"compare_at_price":21500,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/spoon-zero-bump-steer-kit-rear-honda-s2000-ap1ap2-rzcrew.jpg?v=1710325414"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/spoon-zero-bump-steer-kit-rear-honda-s2000-ap1ap2-rzcrew.jpg?v=1710325414","options":["Title"],"media":[{"alt":"Spoon - Spoon - Zero Bump Steer Kit Rear - Honda - AP1\/AP2 - 52220-AP1-020 - Rzcrewgarage","id":25428841136310,"position":1,"preview_image":{"aspect_ratio":1.5,"height":1600,"width":2400,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/spoon-zero-bump-steer-kit-rear-honda-s2000-ap1ap2-rzcrew.jpg?v=1710325414"},"aspect_ratio":1.5,"height":1600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/spoon-zero-bump-steer-kit-rear-honda-s2000-ap1ap2-rzcrew.jpg?v=1710325414","width":2400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cbr\u003eBy installing it, bump steer during lowdown is reduced and sudden toe changes are suppressed.\nAs a result, the roll becomes natural and smooth cornering is achieved.\nThe angle of the lower arm is corrected, the roll center is optimized, and the straightness is also improved.\n* Since the vehicle height will drop after installation, please use the official harmonic drive damper when installing.\u003cbr\u003e\n---\u003cbr\u003e\u003cbr\u003e\nRemarks \u0026amp; special notes\u003cbr\u003e\nGenuine ratio + 8mm * This product is a competition-only part and cannot be used on public roads. Please use it on a closed course such as a circuit.\u003cbr\u003e\u003cbr\u003e\n* Be sure to adjust the alignment after mounting.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eS2000 | AP1 | 1999-2003 | NA | F20C | I4\u003cbr\u003eS2000 | AP2 | 2003-2009 | NA | F22C | I4\u003c!--split--\u003e"}

{"id":7988377551030,"title":"Spoon Brake Hose Set - Honda - Fit-Jazz GK5","handle":"spoon-brake-hose-set-honda-gk5-01460-gk5-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePosition: Front and Rear\u003cbr\u003eMaterial: Stainless Steel\u003cbr\u003eMain Colour: \u003cbr\u003ePieces included: \u003cbr\u003e\u003cbr\u003eSpoon Sports Brake Hoses feature a No. 3 Teflon tube with a low expansion ratio in combination with a covering stainless-steel mesh, and through its implementation, it is possible to achieve braking which feels more direct and responsive.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country'ss regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 1 left in stock!\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eS2000 | AP1 | 1999-2003 | NA | F20C | I4\u003cbr\u003eS2000 | AP2 | 2003-2009 | NA | F22C | I4\u003c!--split--\u003e","published_at":"2024-06-10T18:12:36+08:00","created_at":"2024-06-10T18:11:04+08:00","vendor":"Spoon","type":"Brake Lines and Fittings","tags":["1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","brake-lines-and-fittings","front","honda","JP1","lines-and-fittings","rear","s2000-ap1-1999-2003-na-f20c-i4","s2000-ap2-2003-2009-na-f22c-i4","spoon","ws14"],"price":32736,"price_min":32736,"price_max":32736,"available":true,"price_varies":false,"compare_at_price":34100,"compare_at_price_min":34100,"compare_at_price_max":34100,"compare_at_price_varies":false,"variants":[{"id":43249223336118,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"01460-GK5-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Brake Hose Set - Honda - Fit-Jazz GK5","public_title":null,"options":["Default Title"],"price":32736,"weight":1500,"compare_at_price":34100,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/01460-AP1-000.jpg?v=1723092236"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/01460-AP1-000.jpg?v=1723092236","options":["Title"],"media":[{"alt":"Spoon Brake Hose Set - Honda - AP1\/AP2 - 01460-AP1-000 - Rzcrewgarage","id":28009961717942,"position":1,"preview_image":{"aspect_ratio":1.499,"height":923,"width":1384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/01460-AP1-000.jpg?v=1723092236"},"aspect_ratio":1.499,"height":923,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/01460-AP1-000.jpg?v=1723092236","width":1384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePosition: Front and Rear\u003cbr\u003eMaterial: Stainless Steel\u003cbr\u003eMain Colour: \u003cbr\u003ePieces included: \u003cbr\u003e\u003cbr\u003eSpoon Sports Brake Hoses feature a No. 3 Teflon tube with a low expansion ratio in combination with a covering stainless-steel mesh, and through its implementation, it is possible to achieve braking which feels more direct and responsive.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country'ss regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 1 left in stock!\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eS2000 | AP1 | 1999-2003 | NA | F20C | I4\u003cbr\u003eS2000 | AP2 | 2003-2009 | NA | F22C | I4\u003c!--split--\u003e"}

{"id":401630068763,"title":"Spoon Brake Hose Set - Honda - Integra type R DC5R","handle":"spoon-brake-hose-set-honda-dc5r-01460-dc5-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePosition: Front and Rear\u003cbr\u003eMaterial: Stainless Steel\u003cbr\u003eMain Colour: \u003cbr\u003ePieces included: \u003cbr\u003e\u003cbr\u003eSpoon Sports Brake Hoses feature a No. 3 Teflon tube with a low expansion ratio in combination with a covering stainless-steel mesh, and through its implementation, it is possible to achieve braking which feels more direct and responsive.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country'ss regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 1 left in stock!\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eIntegra type R | DC5R Zenki | 2002-2004 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Kouki | 2004-2006 | NA | K20A | I4\u003c!--split--\u003e","published_at":"2017-12-04T11:20:50+08:00","created_at":"2017-12-04T11:20:51+08:00","vendor":"Spoon","type":"Brake Lines and Fittings","tags":["2002","2003","2004","2005","2006","brake-lines-and-fittings","front","honda","integra-type-r-dc5r-kouki-2004-2006-na-k20a-i4","integra-type-r-dc5r-zenki-2002-2004-na-k20a-i4","jp1","lines-and-fittings","rear","spoon","ws14"],"price":32736,"price_min":32736,"price_max":32736,"available":true,"price_varies":false,"compare_at_price":34100,"compare_at_price_min":34100,"compare_at_price_max":34100,"compare_at_price_varies":false,"variants":[{"id":5004911575067,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"01460-DC5-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Brake Hose Set - Honda - Integra type R DC5R","public_title":null,"options":["Default Title"],"price":32736,"weight":1500,"compare_at_price":34100,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/01460-DC5-000_405533e9-6c21-4f9d-a6bb-ffce575e76c1.jpg?v=1710146265"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/01460-DC5-000_405533e9-6c21-4f9d-a6bb-ffce575e76c1.jpg?v=1710146265","options":["Title"],"media":[{"alt":"Spoon Brake Hose Set - Honda - DC5R - 01460-DC5-000 - Rzcrewgarage","id":26320407363766,"position":1,"preview_image":{"aspect_ratio":1.499,"height":923,"width":1384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/01460-DC5-000_405533e9-6c21-4f9d-a6bb-ffce575e76c1.jpg?v=1710146265"},"aspect_ratio":1.499,"height":923,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/01460-DC5-000_405533e9-6c21-4f9d-a6bb-ffce575e76c1.jpg?v=1710146265","width":1384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePosition: Front and Rear\u003cbr\u003eMaterial: Stainless Steel\u003cbr\u003eMain Colour: \u003cbr\u003ePieces included: \u003cbr\u003e\u003cbr\u003eSpoon Sports Brake Hoses feature a No. 3 Teflon tube with a low expansion ratio in combination with a covering stainless-steel mesh, and through its implementation, it is possible to achieve braking which feels more direct and responsive.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country'ss regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 1 left in stock!\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eIntegra type R | DC5R Zenki | 2002-2004 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Kouki | 2004-2006 | NA | K20A | I4\u003c!--split--\u003e"}

{"id":401629970459,"title":"Spoon Brake Hose Set - Honda - S2000 AP1\/AP2","handle":"spoon-brake-hose-set-honda-ap1-ap2-01460-ap1-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePosition: Front and Rear\u003cbr\u003eMaterial: Stainless Steel\u003cbr\u003eMain Colour: \u003cbr\u003ePieces included: \u003cbr\u003e\u003cbr\u003eSpoon Sports Brake Hoses feature a No. 3 Teflon tube with a low expansion ratio in combination with a covering stainless-steel mesh, and through its implementation, it is possible to achieve braking which feels more direct and responsive.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country'ss regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 1 left in stock!\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eS2000 | AP1 | 1999-2003 | NA | F20C | I4\u003cbr\u003eS2000 | AP2 | 2003-2009 | NA | F22C | I4\u003c!--split--\u003e","published_at":"2017-12-04T11:20:48+08:00","created_at":"2017-12-04T11:20:49+08:00","vendor":"Spoon","type":"Brake Lines and Fittings","tags":["1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","brake-lines-and-fittings","front","honda","jp1","lines-and-fittings","rear","s2000-ap1-1999-2003-na-f20c-i4","s2000-ap2-2003-2009-na-f22c-i4","spoon","ws14"],"price":32736,"price_min":32736,"price_max":32736,"available":true,"price_varies":false,"compare_at_price":34100,"compare_at_price_min":34100,"compare_at_price_max":34100,"compare_at_price_varies":false,"variants":[{"id":5004911476763,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"01460-AP1-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Brake Hose Set - Honda - S2000 AP1\/AP2","public_title":null,"options":["Default Title"],"price":32736,"weight":1500,"compare_at_price":34100,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/01460-AP1-000_07163d9d-cc48-4745-8277-7a70ee95a23d.jpg?v=1710146265"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/01460-AP1-000_07163d9d-cc48-4745-8277-7a70ee95a23d.jpg?v=1710146265","options":["Title"],"media":[{"alt":"Spoon Brake Hose Set - Honda - AP1\/AP2 - 01460-AP1-000 - Rzcrewgarage","id":26320407167158,"position":1,"preview_image":{"aspect_ratio":1.499,"height":923,"width":1384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/01460-AP1-000_07163d9d-cc48-4745-8277-7a70ee95a23d.jpg?v=1710146265"},"aspect_ratio":1.499,"height":923,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/01460-AP1-000_07163d9d-cc48-4745-8277-7a70ee95a23d.jpg?v=1710146265","width":1384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePosition: Front and Rear\u003cbr\u003eMaterial: Stainless Steel\u003cbr\u003eMain Colour: \u003cbr\u003ePieces included: \u003cbr\u003e\u003cbr\u003eSpoon Sports Brake Hoses feature a No. 3 Teflon tube with a low expansion ratio in combination with a covering stainless-steel mesh, and through its implementation, it is possible to achieve braking which feels more direct and responsive.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country'ss regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 1 left in stock!\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eS2000 | AP1 | 1999-2003 | NA | F20C | I4\u003cbr\u003eS2000 | AP2 | 2003-2009 | NA | F22C | I4\u003c!--split--\u003e"}

{"id":401630265371,"title":"Spoon Brake Hose Set - Honda - S2000 AP1\/AP2","handle":"spoon-brake-hose-set-honda-ap1-ap2-01460-jw5-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePosition: Front and Rear\u003cbr\u003eMaterial: Stainless Steel\u003cbr\u003eMain Colour: \u003cbr\u003ePieces included: \u003cbr\u003e\u003cbr\u003eSpoon Sports Brake Hoses feature a No. 3 Teflon tube with a low expansion ratio in combination with a covering stainless-steel mesh, and through its implementation, it is possible to achieve braking which feels more direct and responsive.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country'ss regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 1 left in stock!\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eS2000 | AP1 | 1999-2003 | NA | F20C | I4\u003cbr\u003eS2000 | AP2 | 2003-2009 | NA | F22C | I4\u003c!--split--\u003e","published_at":"2017-12-04T11:20:53+08:00","created_at":"2017-12-04T11:20:55+08:00","vendor":"Spoon","type":"Brake Lines and Fittings","tags":["1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","brake-lines-and-fittings","front","honda","jp1","lines-and-fittings","rear","s2000-ap1-1999-2003-na-f20c-i4","s2000-ap2-2003-2009-na-f22c-i4","spoon","ws14"],"price":32736,"price_min":32736,"price_max":32736,"available":true,"price_varies":false,"compare_at_price":34100,"compare_at_price_min":34100,"compare_at_price_max":34100,"compare_at_price_varies":false,"variants":[{"id":5004914262043,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"01460-JW5-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Brake Hose Set - Honda - S2000 AP1\/AP2","public_title":null,"options":["Default Title"],"price":32736,"weight":1500,"compare_at_price":34100,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/01460-JW5-000_fa212ab2-5f4c-4c52-8e24-9d72258d2566.jpg?v=1710146275"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/01460-JW5-000_fa212ab2-5f4c-4c52-8e24-9d72258d2566.jpg?v=1710146275","options":["Title"],"media":[{"alt":"Spoon Brake Hose Set - Honda - AP1\/AP2 - 01460-JW5-000 - Rzcrewgarage","id":26320408150198,"position":1,"preview_image":{"aspect_ratio":1.5,"height":2606,"width":3910,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/01460-JW5-000_fa212ab2-5f4c-4c52-8e24-9d72258d2566.jpg?v=1710146275"},"aspect_ratio":1.5,"height":2606,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/01460-JW5-000_fa212ab2-5f4c-4c52-8e24-9d72258d2566.jpg?v=1710146275","width":3910}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePosition: Front and Rear\u003cbr\u003eMaterial: Stainless Steel\u003cbr\u003eMain Colour: \u003cbr\u003ePieces included: \u003cbr\u003e\u003cbr\u003eSpoon Sports Brake Hoses feature a No. 3 Teflon tube with a low expansion ratio in combination with a covering stainless-steel mesh, and through its implementation, it is possible to achieve braking which feels more direct and responsive.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country'ss regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 1 left in stock!\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eS2000 | AP1 | 1999-2003 | NA | F20C | I4\u003cbr\u003eS2000 | AP2 | 2003-2009 | NA | F22C | I4\u003c!--split--\u003e"}

{"id":3969501823073,"title":"Spoon Mechanical - 1.75 way Rear LSD - Honda S2000 - AP1\/AP2 (MT)","handle":"spoon-mechanical-1-75-way-rear-lsd-honda-s2000-ap1-ap2-mt-ap1-ap2-41000-ap1-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 41000-AP1-000\u003cbr\u003eLSD Model: Mechanical\u003cbr\u003eLSD Type: 1.75 way \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis item is a direct replacement for the standard differential gear allowing for improved grip and torque to the wheels. All Spoon Lsd Kit comes complete with necessary hardware and bearings. Please refer to the picture for the exact content of this product.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eS2000 | AP1 | 1999-2003 | NA | F20C | I4\u003cbr\u003eS2000 | AP2 | 2003-2009 | NA | F22C | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2019-08-06T13:57:05+08:00","created_at":"2019-08-06T13:57:06+08:00","vendor":"Spoon","type":"Limited Slip Diffs","tags":["1-75-way","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","honda","jp1","limited-slip-diffs","mt","rear","s2000-ap1-1999-2003-na-f20c-i4","s2000-ap2-2003-2009-na-f22c-i4","spoon","ws110"],"price":139140,"price_min":139140,"price_max":139140,"available":true,"price_varies":false,"compare_at_price":154600,"compare_at_price_min":154600,"compare_at_price_max":154600,"compare_at_price_varies":false,"variants":[{"id":29648347627617,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"41000-AP1-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Mechanical - 1.75 way Rear LSD - Honda S2000 - AP1\/AP2 (MT)","public_title":null,"options":["Default Title"],"price":139140,"weight":9000,"compare_at_price":154600,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/41000-AP1-000.jpg?v=1710183868"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/41000-AP1-000.jpg?v=1710183868","options":["Title"],"media":[{"alt":"Spoon Mechanical - 1.75 way Rear LSD - Honda S2000 - AP1\/AP2 (MT) - AP1\/AP2 - 41000-AP1-000","id":25540907991222,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/41000-AP1-000.jpg?v=1710183868"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/41000-AP1-000.jpg?v=1710183868","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 41000-AP1-000\u003cbr\u003eLSD Model: Mechanical\u003cbr\u003eLSD Type: 1.75 way \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis item is a direct replacement for the standard differential gear allowing for improved grip and torque to the wheels. All Spoon Lsd Kit comes complete with necessary hardware and bearings. Please refer to the picture for the exact content of this product.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eS2000 | AP1 | 1999-2003 | NA | F20C | I4\u003cbr\u003eS2000 | AP2 | 2003-2009 | NA | F22C | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":7184286810294,"title":"Spoon Rear Brake Pads - Honda - Accord Euro R CL7","handle":"spoon-rear-brake-pads-honda-cl7-43022-ek9-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePosition: Rear\u003cbr\u003ePurpose: Street,Circuit\u003cbr\u003e\u003cbr\u003eThe features are (1) improved fadeability by using a material that suppresses the generation of resin gas, (2) sufficient effectiveness and feel at low temperatures, (3) wear resistance equivalent to normal, and (4) less aggression to the rotor. These features realized by combining various factors including not only the pad material but also the back metal etc. utilize not only the stopping power but also the negative inertia G generated by braking for the cornering power. Also gained excellent controllability for. The best minus G (average coefficient of friction 0.32 to 0.38) can be obtained when the proper rotor temperature is 0 to 400 ° C, and the brake fee is direct but excellent in control, which everyone can be confident on the street. Equipped with a ring.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAccord Euro R | CL7 | 2002-2008 | NA | K20A | I4\u003c!--split--\u003e","published_at":"2021-12-03T18:14:02+08:00","created_at":"2021-12-03T18:10:19+08:00","vendor":"Spoon","type":"Brake Pads","tags":["2002","2003","2004","2005","2006","2007","2008","accord-euro-r-cl7-2002-2008-na-k20a-i4","brake-pads","circuit","honda","jp1","rear","spoon","street","ws19"],"price":17836,"price_min":17836,"price_max":17836,"available":true,"price_varies":false,"compare_at_price":19600,"compare_at_price_min":19600,"compare_at_price_max":19600,"compare_at_price_varies":false,"variants":[{"id":40955973206198,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"43022-EK9-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rear Brake Pads - Honda - Accord Euro R CL7","public_title":null,"options":["Default Title"],"price":17836,"weight":1300,"compare_at_price":19600,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/spoon-rear-brake-pads-honda-accord-euro-r-cl7-rzcrew.jpg?v=1710322073"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/spoon-rear-brake-pads-honda-accord-euro-r-cl7-rzcrew.jpg?v=1710322073","options":["Title"],"media":[{"alt":"Spoon Rear Brake Pads - Honda - CL7 - 43022-EK9-000 - Rzcrewgarage","id":25418604183734,"position":1,"preview_image":{"aspect_ratio":0.734,"height":722,"width":530,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/spoon-rear-brake-pads-honda-accord-euro-r-cl7-rzcrew.jpg?v=1710322073"},"aspect_ratio":0.734,"height":722,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/spoon-rear-brake-pads-honda-accord-euro-r-cl7-rzcrew.jpg?v=1710322073","width":530}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePosition: Rear\u003cbr\u003ePurpose: Street,Circuit\u003cbr\u003e\u003cbr\u003eThe features are (1) improved fadeability by using a material that suppresses the generation of resin gas, (2) sufficient effectiveness and feel at low temperatures, (3) wear resistance equivalent to normal, and (4) less aggression to the rotor. These features realized by combining various factors including not only the pad material but also the back metal etc. utilize not only the stopping power but also the negative inertia G generated by braking for the cornering power. Also gained excellent controllability for. The best minus G (average coefficient of friction 0.32 to 0.38) can be obtained when the proper rotor temperature is 0 to 400 ° C, and the brake fee is direct but excellent in control, which everyone can be confident on the street. Equipped with a ring.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAccord Euro R | CL7 | 2002-2008 | NA | K20A | I4\u003c!--split--\u003e"}

{"id":7184287432886,"title":"Spoon Rear Brake Pads - Honda - Fit-Jazz GD3","handle":"spoon-rear-brake-pads-honda-gd3-43022-efa-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePosition: Rear\u003cbr\u003ePurpose: Street,Circuit\u003cbr\u003e\u003cbr\u003eThe features are (1) improved fadeability by using a material that suppresses the generation of resin gas, (2) sufficient effectiveness and feel at low temperatures, (3) wear resistance equivalent to normal, and (4) less aggression to the rotor. These features realized by combining various factors including not only the pad material but also the back metal etc. utilize not only the stopping power but also the negative inertia G generated by braking for the cornering power. Also gained excellent controllability for. The best minus G (average coefficient of friction 0.32 to 0.38) can be obtained when the proper rotor temperature is 0 to 400 ° C, and the brake fee is direct but excellent in control, which everyone can be confident on the street. Equipped with a ring.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eFit-Jazz | GD3 | 2001-2008 | NA | L15A | I4\u003c!--split--\u003e","published_at":"2021-12-03T18:14:02+08:00","created_at":"2021-12-03T18:10:40+08:00","vendor":"Spoon","type":"Brake Pads","tags":["2001","2002","2003","2004","2005","2006","2007","2008","brake-pads","circuit","fit-jazz-gd3-2001-2008-na-l15a-i4","honda","jp1","rear","spoon","street","ws19"],"price":17836,"price_min":17836,"price_max":17836,"available":true,"price_varies":false,"compare_at_price":19600,"compare_at_price_min":19600,"compare_at_price_max":19600,"compare_at_price_varies":false,"variants":[{"id":40955974320310,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"43022-EFA-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rear Brake Pads - Honda - Fit-Jazz GD3","public_title":null,"options":["Default Title"],"price":17836,"weight":1300,"compare_at_price":19600,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/spoon-rear-brake-pads-honda-fit-jazz-gd3-rzcrew.jpg?v=1710322058"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/spoon-rear-brake-pads-honda-fit-jazz-gd3-rzcrew.jpg?v=1710322058","options":["Title"],"media":[{"alt":"Spoon Rear Brake Pads - Honda - GD3 - 43022-EFA-000 - Rzcrewgarage","id":25418606051510,"position":1,"preview_image":{"aspect_ratio":0.734,"height":722,"width":530,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/spoon-rear-brake-pads-honda-fit-jazz-gd3-rzcrew.jpg?v=1710322058"},"aspect_ratio":0.734,"height":722,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/spoon-rear-brake-pads-honda-fit-jazz-gd3-rzcrew.jpg?v=1710322058","width":530}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePosition: Rear\u003cbr\u003ePurpose: Street,Circuit\u003cbr\u003e\u003cbr\u003eThe features are (1) improved fadeability by using a material that suppresses the generation of resin gas, (2) sufficient effectiveness and feel at low temperatures, (3) wear resistance equivalent to normal, and (4) less aggression to the rotor. These features realized by combining various factors including not only the pad material but also the back metal etc. utilize not only the stopping power but also the negative inertia G generated by braking for the cornering power. Also gained excellent controllability for. The best minus G (average coefficient of friction 0.32 to 0.38) can be obtained when the proper rotor temperature is 0 to 400 ° C, and the brake fee is direct but excellent in control, which everyone can be confident on the street. Equipped with a ring.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eFit-Jazz | GD3 | 2001-2008 | NA | L15A | I4\u003c!--split--\u003e"}

{"id":7184287105206,"title":"Spoon Rear Brake Pads - Honda - Integra type R DC5R","handle":"spoon-rear-brake-pads-honda-dc5r-43022-ek9-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePosition: Rear\u003cbr\u003ePurpose: Street,Circuit\u003cbr\u003e\u003cbr\u003eThe features are (1) improved fadeability by using a material that suppresses the generation of resin gas, (2) sufficient effectiveness and feel at low temperatures, (3) wear resistance equivalent to normal, and (4) less aggression to the rotor. These features realized by combining various factors including not only the pad material but also the back metal etc. utilize not only the stopping power but also the negative inertia G generated by braking for the cornering power. Also gained excellent controllability for. The best minus G (average coefficient of friction 0.32 to 0.38) can be obtained when the proper rotor temperature is 0 to 400 ° C, and the brake fee is direct but excellent in control, which everyone can be confident on the street. Equipped with a ring.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eIntegra type R | DC5R Zenki | 2002-2004 | NA | K20A | I4,Integra type R | DC5R Kouki | 2004-2006 | NA | K20A | I4\u003c!--split--\u003e","published_at":"2021-12-03T18:14:02+08:00","created_at":"2021-12-03T18:10:30+08:00","vendor":"Spoon","type":"Brake Pads","tags":["2002","2003","2004","2005","2006","brake-pads","circuit","honda","integra-type-r-dc5r-kouki-2004-2006-na-k20a-i4","integra-type-r-dc5r-zenki-2002-2004-na-k20a-i4","jp1","rear","spoon","street","ws19"],"price":17836,"price_min":17836,"price_max":17836,"available":true,"price_varies":false,"compare_at_price":19600,"compare_at_price_min":19600,"compare_at_price_max":19600,"compare_at_price_varies":false,"variants":[{"id":40955973632182,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"43022-EK9-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rear Brake Pads - Honda - Integra type R DC5R","public_title":null,"options":["Default Title"],"price":17836,"weight":1300,"compare_at_price":19600,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/spoon-rear-brake-pads-honda-integra-type-r-dc5r-rzcrew.jpg?v=1710322071"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/spoon-rear-brake-pads-honda-integra-type-r-dc5r-rzcrew.jpg?v=1710322071","options":["Title"],"media":[{"alt":"Spoon Rear Brake Pads - Honda - DC5R - 43022-EK9-000 - Rzcrewgarage","id":25418605363382,"position":1,"preview_image":{"aspect_ratio":0.734,"height":722,"width":530,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/spoon-rear-brake-pads-honda-integra-type-r-dc5r-rzcrew.jpg?v=1710322071"},"aspect_ratio":0.734,"height":722,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/spoon-rear-brake-pads-honda-integra-type-r-dc5r-rzcrew.jpg?v=1710322071","width":530}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePosition: Rear\u003cbr\u003ePurpose: Street,Circuit\u003cbr\u003e\u003cbr\u003eThe features are (1) improved fadeability by using a material that suppresses the generation of resin gas, (2) sufficient effectiveness and feel at low temperatures, (3) wear resistance equivalent to normal, and (4) less aggression to the rotor. These features realized by combining various factors including not only the pad material but also the back metal etc. utilize not only the stopping power but also the negative inertia G generated by braking for the cornering power. Also gained excellent controllability for. The best minus G (average coefficient of friction 0.32 to 0.38) can be obtained when the proper rotor temperature is 0 to 400 ° C, and the brake fee is direct but excellent in control, which everyone can be confident on the street. Equipped with a ring.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eIntegra type R | DC5R Zenki | 2002-2004 | NA | K20A | I4,Integra type R | DC5R Kouki | 2004-2006 | NA | K20A | I4\u003c!--split--\u003e"}

{"id":7184286843062,"title":"Spoon Rear Brake Pads - Honda - S2000 AP1\/AP2","handle":"spoon-rear-brake-pads-honda-ap1-ap2-43022-ek9-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePosition: Rear\u003cbr\u003ePurpose: Street,Circuit\u003cbr\u003e\u003cbr\u003eThe features are (1) improved fadeability by using a material that suppresses the generation of resin gas, (2) sufficient effectiveness and feel at low temperatures, (3) wear resistance equivalent to normal, and (4) less aggression to the rotor. These features realized by combining various factors including not only the pad material but also the back metal etc. utilize not only the stopping power but also the negative inertia G generated by braking for the cornering power. Also gained excellent controllability for. The best minus G (average coefficient of friction 0.32 to 0.38) can be obtained when the proper rotor temperature is 0 to 400 ° C, and the brake fee is direct but excellent in control, which everyone can be confident on the street. Equipped with a ring.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eS2000 | AP1 | 1999-2003 | NA | F20C | I4,S2000 | AP2 | 2003-2009 | NA | F22C | I4\u003c!--split--\u003e","published_at":"2021-12-03T18:14:02+08:00","created_at":"2021-12-03T18:10:21+08:00","vendor":"Spoon","type":"Brake Pads","tags":["1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","brake-pads","circuit","honda","jp1","rear","s2000-ap1-1999-2003-na-f20c-i4","s2000-ap2-2003-2009-na-f22c-i4","spoon","street","ws19"],"price":17836,"price_min":17836,"price_max":17836,"available":true,"price_varies":false,"compare_at_price":19600,"compare_at_price_min":19600,"compare_at_price_max":19600,"compare_at_price_varies":false,"variants":[{"id":40955973238966,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"43022-EK9-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rear Brake Pads - Honda - S2000 AP1\/AP2","public_title":null,"options":["Default Title"],"price":17836,"weight":1300,"compare_at_price":19600,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/spoon-rear-brake-pads-honda-s2000-ap1ap2-rzcrew.jpg?v=1710322073"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/spoon-rear-brake-pads-honda-s2000-ap1ap2-rzcrew.jpg?v=1710322073","options":["Title"],"media":[{"alt":"Spoon Rear Brake Pads - Honda - AP1\/AP2 - 43022-EK9-000 - Rzcrewgarage","id":25418604282038,"position":1,"preview_image":{"aspect_ratio":0.734,"height":722,"width":530,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/spoon-rear-brake-pads-honda-s2000-ap1ap2-rzcrew.jpg?v=1710322073"},"aspect_ratio":0.734,"height":722,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/spoon-rear-brake-pads-honda-s2000-ap1ap2-rzcrew.jpg?v=1710322073","width":530}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePosition: Rear\u003cbr\u003ePurpose: Street,Circuit\u003cbr\u003e\u003cbr\u003eThe features are (1) improved fadeability by using a material that suppresses the generation of resin gas, (2) sufficient effectiveness and feel at low temperatures, (3) wear resistance equivalent to normal, and (4) less aggression to the rotor. These features realized by combining various factors including not only the pad material but also the back metal etc. utilize not only the stopping power but also the negative inertia G generated by braking for the cornering power. Also gained excellent controllability for. The best minus G (average coefficient of friction 0.32 to 0.38) can be obtained when the proper rotor temperature is 0 to 400 ° C, and the brake fee is direct but excellent in control, which everyone can be confident on the street. Equipped with a ring.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eS2000 | AP1 | 1999-2003 | NA | F20C | I4,S2000 | AP2 | 2003-2009 | NA | F22C | I4\u003c!--split--\u003e"}

{"id":1433315934305,"title":"Spoon Rigid Collar Kit - Front \u0026 Rear - Honda S2000 AP1\/AP2","handle":"spoon-rigid-collar-kit-front-rear-honda-s2000-ap1-ap2-50261-ap1-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-AP1-000\u003cbr\u003ePosition: Front \u0026amp; Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eS2000 | AP1 | 1999-2003 | NA | F20C | I4\u003cbr\u003eS2000 | AP2 | 2003-2009 | NA | F22C | I4\u003c!--split--\u003e","published_at":"2018-09-23T15:19:22+08:00","created_at":"2018-09-23T15:19:23+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2004","2005","2006","2007","2008","2009","AP1\/AP2","collar-kits","front","honda","jp1","rear","rigid-collars","s2000-ap1-1999-2003-na-f20c-i4","s2000-ap2-2003-2009-na-f22c-i4","spoon","ws17"],"price":17577,"price_min":17577,"price_max":17577,"available":true,"price_varies":false,"compare_at_price":18900,"compare_at_price_min":18900,"compare_at_price_max":18900,"compare_at_price_varies":false,"variants":[{"id":12435571048545,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-AP1-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front \u0026 Rear - Honda S2000 AP1\/AP2","public_title":null,"options":["Default Title"],"price":17577,"weight":1100,"compare_at_price":18900,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_9fc921ea-ede6-43ca-bc01-aaf94ae7fbbd.jpg?v=1710167776"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_9fc921ea-ede6-43ca-bc01-aaf94ae7fbbd.jpg?v=1710167776","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front \u0026 Rear - Honda S2000 AP1\/AP2 - 50261-AP1-000 - RZCrewGarage","id":22882163753142,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_9fc921ea-ede6-43ca-bc01-aaf94ae7fbbd.jpg?v=1710167776"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_9fc921ea-ede6-43ca-bc01-aaf94ae7fbbd.jpg?v=1710167776","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-AP1-000\u003cbr\u003ePosition: Front \u0026amp; Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eS2000 | AP1 | 1999-2003 | NA | F20C | I4\u003cbr\u003eS2000 | AP2 | 2003-2009 | NA | F22C | I4\u003c!--split--\u003e"}

{"id":1433320587361,"title":"Spoon Rigid Collar Kit - Front \u0026 Rear - Mazda MX-5 Miata Roadster NCEC","handle":"spoon-rigid-collar-kit-front-rear-mazda-mx-5-miata-roadster-ncec-50261-nc8-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-NC8-000\u003cbr\u003ePosition: Front \u0026amp; Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMX-5 Miata Roadster | NCEC | 2005-2008 | NA | LF-VE | I4\u003c!--split--\u003e","published_at":"2018-09-23T15:22:50+08:00","created_at":"2018-09-23T15:22:51+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2005","2006","2007","2008","collar-kits","front","jp1","mazda","mx-5-miata-roadster-ncec-2005-2008-na-lf-ve-i4","NCEC","rear","rigid-collars","spoon","ws17"],"price":21483,"price_min":21483,"price_max":21483,"available":true,"price_varies":false,"compare_at_price":23100,"compare_at_price_min":23100,"compare_at_price_max":23100,"compare_at_price_varies":false,"variants":[{"id":12435577995361,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-NC8-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front \u0026 Rear - Mazda MX-5 Miata Roadster NCEC","public_title":null,"options":["Default Title"],"price":21483,"weight":1100,"compare_at_price":23100,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_15ef076b-cee1-447e-a1e2-a5c1773cf241.jpg?v=1710167874"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_15ef076b-cee1-447e-a1e2-a5c1773cf241.jpg?v=1710167874","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front \u0026 Rear - Mazda MX-5 Miata Roadster NCEC - 50261-NC8-000 - RZCrewGarage","id":22882177745078,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_15ef076b-cee1-447e-a1e2-a5c1773cf241.jpg?v=1710167874"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_15ef076b-cee1-447e-a1e2-a5c1773cf241.jpg?v=1710167874","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-NC8-000\u003cbr\u003ePosition: Front \u0026amp; Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMX-5 Miata Roadster | NCEC | 2005-2008 | NA | LF-VE | I4\u003c!--split--\u003e"}

{"id":8111706603702,"title":"Spoon Rigid Collar Kit - Rear - BMW 3 Series E90\/E91\/E92\/E93","handle":"spoon-rigid-collar-kit-rear-bmw-3-series-e90-e91-e92-e93-50300-e87-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-E87-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e3 Series | E90 | 2005-2013 | NA | I4\u003cbr\u003e3 Series | E90 | 2004-2011 | NA | I6\u003cbr\u003e3 Series | E90 | 2004-2011 | NA | I6\u003cbr\u003e3 Series | E90 | 2007-2013 | TC | I6\u003cbr\u003e3 Series M3 | E90 | 2008-2013 | NA | S65B40 | V8\u003cbr\u003e3 Series M3 CRT | E90 | 2011-2012 | NA | S65B44 | V8\u003cbr\u003e3 Series Estate | E91 | 2005-2013 | NA | I4\u003cbr\u003e3 Series Estate | E91 | 2007-2013 | TC | I6\u003cbr\u003e3 Series Coupe | E92 | 2007-2011 | NA | I4\u003cbr\u003e3 Series Coupe | E92 | 2007-2013 | TC | I6\u003cbr\u003e3 Series M3 | E92 | 2008-2013 | NA | S65B40 | V8\u003cbr\u003e3 Series Cabriolet | E93 | 2007-2011 | NA | I4\u003cbr\u003e3 Series Cabriolet | E93 | 2004-2011 | NA | I6\u003cbr\u003e3 Series Cabriolet | E93 | 2007-2013 | TC | I6\u003cbr\u003e3 Series M3 | E93 | 2008-2013 | NA | S65B40 | V8\u003c!--split--\u003e","published_at":"2024-11-22T14:55:06+08:00","created_at":"2024-11-22T14:53:54+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","3-series-cabriolet-e93-2004-2011-na-i6","3-series-cabriolet-e93-2007-2011-na-i4","3-series-cabriolet-e93-2007-2013-tc-i6","3-series-coupe-e92-2007-2011-na-i4","3-series-coupe-e92-2007-2013-tc-i6","3-series-e90-2004-2011-na-i6","3-series-e90-2005-2013-na-i4","3-series-e90-2007-2013-tc-i6","3-series-estate-e91-2005-2013-na-i4","3-series-estate-e91-2007-2013-tc-i6","3-series-m3-crt-e90-2011-2012-na-s65b44-v8","3-series-m3-e90-2008-2013-na-s65b40-v8","3-series-m3-e92-2008-2013-na-s65b40-v8","3-series-m3-e93-2008-2013-na-s65b40-v8","bmw","collar-kits","E90\/E91\/E92\/E93","JP1","rear","rigid-collars","spoon","ws17"],"price":19902,"price_min":19902,"price_max":19902,"available":true,"price_varies":false,"compare_at_price":21400,"compare_at_price_min":21400,"compare_at_price_max":21400,"compare_at_price_varies":false,"variants":[{"id":43632751870134,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-E87-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - BMW 3 Series E90\/E91\/E92\/E93","public_title":null,"options":["Default Title"],"price":19902,"weight":1100,"compare_at_price":21400,"inventory_quantity":50,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/SPOONRC_87c1e8b5-6d82-4c46-9e98-02c2f80110cb.jpg?v=1732258435"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/SPOONRC_87c1e8b5-6d82-4c46-9e98-02c2f80110cb.jpg?v=1732258435","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - BMW 3 Series E90\/E91\/E92\/E93 - 50300-E87-000 - RZCrewGarage","id":28802399961270,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/SPOONRC_87c1e8b5-6d82-4c46-9e98-02c2f80110cb.jpg?v=1732258435"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/SPOONRC_87c1e8b5-6d82-4c46-9e98-02c2f80110cb.jpg?v=1732258435","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-E87-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e3 Series | E90 | 2005-2013 | NA | I4\u003cbr\u003e3 Series | E90 | 2004-2011 | NA | I6\u003cbr\u003e3 Series | E90 | 2004-2011 | NA | I6\u003cbr\u003e3 Series | E90 | 2007-2013 | TC | I6\u003cbr\u003e3 Series M3 | E90 | 2008-2013 | NA | S65B40 | V8\u003cbr\u003e3 Series M3 CRT | E90 | 2011-2012 | NA | S65B44 | V8\u003cbr\u003e3 Series Estate | E91 | 2005-2013 | NA | I4\u003cbr\u003e3 Series Estate | E91 | 2007-2013 | TC | I6\u003cbr\u003e3 Series Coupe | E92 | 2007-2011 | NA | I4\u003cbr\u003e3 Series Coupe | E92 | 2007-2013 | TC | I6\u003cbr\u003e3 Series M3 | E92 | 2008-2013 | NA | S65B40 | V8\u003cbr\u003e3 Series Cabriolet | E93 | 2007-2011 | NA | I4\u003cbr\u003e3 Series Cabriolet | E93 | 2004-2011 | NA | I6\u003cbr\u003e3 Series Cabriolet | E93 | 2007-2013 | TC | I6\u003cbr\u003e3 Series M3 | E93 | 2008-2013 | NA | S65B40 | V8\u003c!--split--\u003e"}

{"id":1433322651745,"title":"Spoon Rigid Collar Kit - Rear - Daihatsu Copen L880K","handle":"spoon-rigid-collar-kit-rear-daihatsu-copen-l880k-50300-cop-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-COP-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCopen | L880K | 2002-2012 | TC | JB-DET | I4\u003c!--split--\u003e","published_at":"2018-09-23T15:24:17+08:00","created_at":"2018-09-23T15:24:18+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","collar-kits","copen-l880k-2002-2012-tc-jb-det-i4","daihatsu","jp1","L880K","rear","rigid-collars","spoon","ws18"],"price":5428,"price_min":5428,"price_max":5428,"available":true,"price_varies":false,"compare_at_price":5900,"compare_at_price_min":5900,"compare_at_price_max":5900,"compare_at_price_varies":false,"variants":[{"id":12435580026977,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-COP-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Daihatsu Copen L880K","public_title":null,"options":["Default Title"],"price":5428,"weight":1100,"compare_at_price":5900,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_a6c58c7d-1b49-4b5f-bbc2-0585cf2e1bc4.jpg?v=1710167918"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_a6c58c7d-1b49-4b5f-bbc2-0585cf2e1bc4.jpg?v=1710167918","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Daihatsu Copen L880K - 50300-COP-000 - RZCrewGarage","id":22882182529206,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_a6c58c7d-1b49-4b5f-bbc2-0585cf2e1bc4.jpg?v=1710167918"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_a6c58c7d-1b49-4b5f-bbc2-0585cf2e1bc4.jpg?v=1710167918","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-COP-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCopen | L880K | 2002-2012 | TC | JB-DET | I4\u003c!--split--\u003e"}

{"id":1433322586209,"title":"Spoon Rigid Collar Kit - Rear - Daihatsu Essay L235S","handle":"spoon-rigid-collar-kit-rear-daihatsu-essay-l235s-50300-cop-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-COP-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eEssay | L235S | 2005-2011 | NA | KF-VE | I3\u003c!--split--\u003e","published_at":"2018-09-23T15:24:14+08:00","created_at":"2018-09-23T15:24:15+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2005","2006","2007","2008","2009","2010","2011","collar-kits","daihatsu","essay-l235s-2005-2011-na-kf-ve-i3","jp1","L235S","rear","rigid-collars","spoon","ws18"],"price":5428,"price_min":5428,"price_max":5428,"available":true,"price_varies":false,"compare_at_price":5900,"compare_at_price_min":5900,"compare_at_price_max":5900,"compare_at_price_varies":false,"variants":[{"id":12435579961441,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-COP-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Daihatsu Essay L235S","public_title":null,"options":["Default Title"],"price":5428,"weight":1100,"compare_at_price":5900,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_ae6b9438-fbd7-4030-a033-507891565e67.jpg?v=1710167909"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_ae6b9438-fbd7-4030-a033-507891565e67.jpg?v=1710167909","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Daihatsu Essay L235S - 50300-COP-000 - RZCrewGarage","id":22882182398134,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_ae6b9438-fbd7-4030-a033-507891565e67.jpg?v=1710167909"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_ae6b9438-fbd7-4030-a033-507891565e67.jpg?v=1710167909","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-COP-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eEssay | L235S | 2005-2011 | NA | KF-VE | I3\u003c!--split--\u003e"}

{"id":1433323438177,"title":"Spoon Rigid Collar Kit - Rear - Daihatsu Latte L550S","handle":"spoon-rigid-collar-kit-rear-daihatsu-latte-l550s-50300-cop-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-COP-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eLatte | L550S | 2004-2007 | TC | EF-DET | I3\u003c!--split--\u003e","published_at":"2018-09-23T15:24:50+08:00","created_at":"2018-09-23T15:24:51+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2004","2005","2006","2007","collar-kits","daihatsu","jp1","L550S","latte-l550s-2004-2007-tc-ef-det-i3","rear","rigid-collars","spoon","ws18"],"price":5428,"price_min":5428,"price_max":5428,"available":true,"price_varies":false,"compare_at_price":5900,"compare_at_price_min":5900,"compare_at_price_max":5900,"compare_at_price_varies":false,"variants":[{"id":12435580944481,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-COP-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Daihatsu Latte L550S","public_title":null,"options":["Default Title"],"price":5428,"weight":1100,"compare_at_price":5900,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_ae2d35f8-ef3b-42bb-aba2-b78623f43b1e.jpg?v=1710167927"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_ae2d35f8-ef3b-42bb-aba2-b78623f43b1e.jpg?v=1710167927","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Daihatsu Latte L550S - 50300-COP-000 - RZCrewGarage","id":22882184691894,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_ae2d35f8-ef3b-42bb-aba2-b78623f43b1e.jpg?v=1710167927"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_ae2d35f8-ef3b-42bb-aba2-b78623f43b1e.jpg?v=1710167927","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-COP-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eLatte | L550S | 2004-2007 | TC | EF-DET | I3\u003c!--split--\u003e"}

{"id":1433322782817,"title":"Spoon Rigid Collar Kit - Rear - Daihatsu Tanto L350S","handle":"spoon-rigid-collar-kit-rear-daihatsu-tanto-l350s-50300-cop-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-COP-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eTanto | L350S | 2005-2007 | NA | EF-VE | I3\u003c!--split--\u003e","published_at":"2018-09-23T15:24:23+08:00","created_at":"2018-09-23T15:24:24+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2005","2006","2007","collar-kits","daihatsu","jp1","L350S","rear","rigid-collars","spoon","tanto-l350s-2005-2007-na-ef-ve-i3","ws18"],"price":5428,"price_min":5428,"price_max":5428,"available":true,"price_varies":false,"compare_at_price":5900,"compare_at_price_min":5900,"compare_at_price_max":5900,"compare_at_price_varies":false,"variants":[{"id":12435580158049,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-COP-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Daihatsu Tanto L350S","public_title":null,"options":["Default Title"],"price":5428,"weight":1100,"compare_at_price":5900,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_3e6ea055-b84d-494d-8a16-324f12f5f9fa.jpg?v=1710167918"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_3e6ea055-b84d-494d-8a16-324f12f5f9fa.jpg?v=1710167918","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Daihatsu Tanto L350S - 50300-COP-000 - RZCrewGarage","id":22882182955190,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_3e6ea055-b84d-494d-8a16-324f12f5f9fa.jpg?v=1710167918"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_3e6ea055-b84d-494d-8a16-324f12f5f9fa.jpg?v=1710167918","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-COP-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eTanto | L350S | 2005-2007 | NA | EF-VE | I3\u003c!--split--\u003e"}

{"id":1433311903841,"title":"Spoon Rigid Collar Kit - Rear - Honda Airwave GJ1","handle":"spoon-rigid-collar-kit-rear-honda-airwave-gj1-50300-ge8-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-GE8-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eAirwave | GJ1 | 2005-2018 | NA | L15A | I4\u003c!--split--\u003e","published_at":"2018-09-23T15:16:22+08:00","created_at":"2018-09-23T15:16:23+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","airwave-gj1-2005-2018-na-l15a-i4","collar-kits","GJ1","honda","jp1","rear","rigid-collars","spoon","ws18"],"price":5428,"price_min":5428,"price_max":5428,"available":true,"price_varies":false,"compare_at_price":5900,"compare_at_price_min":5900,"compare_at_price_max":5900,"compare_at_price_varies":false,"variants":[{"id":12435567018081,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-GE8-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Honda Airwave GJ1","public_title":null,"options":["Default Title"],"price":5428,"weight":1100,"compare_at_price":5900,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_b14191e9-616d-494e-9f47-210b2a2090a4.jpg?v=1710167686"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_b14191e9-616d-494e-9f47-210b2a2090a4.jpg?v=1710167686","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Honda Airwave GJ1 - 50300-GE8-000 - RZCrewGarage","id":22882148974774,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_b14191e9-616d-494e-9f47-210b2a2090a4.jpg?v=1710167686"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_b14191e9-616d-494e-9f47-210b2a2090a4.jpg?v=1710167686","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-GE8-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eAirwave | GJ1 | 2005-2018 | NA | L15A | I4\u003c!--split--\u003e"}

{"id":1433314951265,"title":"Spoon Rigid Collar Kit - Rear - Honda City GD8","handle":"spoon-rigid-collar-kit-rear-honda-city-gd8-50300-gd3-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-GD3-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCity | GD8 | 2003-2008 | NA | L13A | I4\u003cbr\u003eCity | GD8 | 2003-2008 | NA | L15A2 | I4\u003cbr\u003eCity | GD8 | 2003-2008 | NA | L15A1 | I4\u003c!--split--\u003e","published_at":"2018-09-23T15:18:41+08:00","created_at":"2018-09-23T15:18:42+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2003","2004","2005","2006","2007","2008","city-gd8-2003-2008-na-l13a-i4","city-gd8-2003-2008-na-l15a1-i4","city-gd8-2003-2008-na-l15a2-i4","collar-kits","GD8","honda","jp1","rear","rigid-collars","spoon","ws18"],"price":5428,"price_min":5428,"price_max":5428,"available":true,"price_varies":false,"compare_at_price":5900,"compare_at_price_min":5900,"compare_at_price_max":5900,"compare_at_price_varies":false,"variants":[{"id":12435570032737,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-GD3-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Honda City GD8","public_title":null,"options":["Default Title"],"price":5428,"weight":1100,"compare_at_price":5900,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_a8603d81-497d-4abe-853c-d12a80b4cfcb.jpg?v=1710167757"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_a8603d81-497d-4abe-853c-d12a80b4cfcb.jpg?v=1710167757","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Honda City GD8 - 50300-GD3-000 - RZCrewGarage","id":22882159952054,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_a8603d81-497d-4abe-853c-d12a80b4cfcb.jpg?v=1710167757"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_a8603d81-497d-4abe-853c-d12a80b4cfcb.jpg?v=1710167757","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-GD3-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCity | GD8 | 2003-2008 | NA | L13A | I4\u003cbr\u003eCity | GD8 | 2003-2008 | NA | L15A2 | I4\u003cbr\u003eCity | GD8 | 2003-2008 | NA | L15A1 | I4\u003c!--split--\u003e"}

{"id":1433313575009,"title":"Spoon Rigid Collar Kit - Rear - Honda Civic ES1\/ES3\/FG2","handle":"spoon-rigid-collar-kit-rear-honda-civic-es1-es3-fg2-50300-ep3-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-EP3-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic Ferio | ES1 | 2000-2003 | NA | D15B | I4\u003cbr\u003eCivic Ferio | ES3 | 2000-2003 | NA | D17A | I4\u003cbr\u003eCivic | FG2 | 2007-2009 | NA | K20Z3 | I4\u003c!--split--\u003e","published_at":"2018-09-23T15:17:39+08:00","created_at":"2018-09-23T15:17:40+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","civic-ferio-es1-2000-2003-na-d15b-i4","civic-ferio-es3-2000-2003-na-d17a-i4","civic-fg2-2007-2009-na-k20z3-i4","collar-kits","ES1\/ES3\/FG2","honda","jp1","rear","rigid-collars","spoon","ws17"],"price":17577,"price_min":17577,"price_max":17577,"available":true,"price_varies":false,"compare_at_price":18900,"compare_at_price_min":18900,"compare_at_price_max":18900,"compare_at_price_varies":false,"variants":[{"id":12435568689249,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-EP3-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Honda Civic ES1\/ES3\/FG2","public_title":null,"options":["Default Title"],"price":17577,"weight":1100,"compare_at_price":18900,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_6b9423f4-3260-4785-9e0d-93adec1164d9.jpg?v=1710167720"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_6b9423f4-3260-4785-9e0d-93adec1164d9.jpg?v=1710167720","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Honda Civic ES1\/ES3\/FG2 - 50300-EP3-000 - RZCrewGarage","id":22882155397302,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_6b9423f4-3260-4785-9e0d-93adec1164d9.jpg?v=1710167720"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_6b9423f4-3260-4785-9e0d-93adec1164d9.jpg?v=1710167720","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-EP3-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic Ferio | ES1 | 2000-2003 | NA | D15B | I4\u003cbr\u003eCivic Ferio | ES3 | 2000-2003 | NA | D17A | I4\u003cbr\u003eCivic | FG2 | 2007-2009 | NA | K20Z3 | I4\u003c!--split--\u003e"}

{"id":1433313706081,"title":"Spoon Rigid Collar Kit - Rear - Honda Civic Hybrid FD3","handle":"spoon-rigid-collar-kit-rear-honda-civic-hybrid-fd3-50300-fd2-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-FD2-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic Hybrid | FD3 | 2006-2011 | H | LDA | I4\u003c!--split--\u003e","published_at":"2018-09-23T15:17:45+08:00","created_at":"2018-09-23T15:17:46+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2006","2007","2008","2009","2010","2011","civic-hybrid-fd3-2006-2011-h-lda-i4","collar-kits","FD3","honda","jp1","rear","rigid-collars","spoon","ws17"],"price":17577,"price_min":17577,"price_max":17577,"available":true,"price_varies":false,"compare_at_price":18900,"compare_at_price_min":18900,"compare_at_price_max":18900,"compare_at_price_varies":false,"variants":[{"id":12435568820321,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-FD2-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Honda Civic Hybrid FD3","public_title":null,"options":["Default Title"],"price":17577,"weight":1100,"compare_at_price":18900,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_3884ecfd-bd8a-4abc-9ab7-674da52f3aa2.jpg?v=1710167720"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_3884ecfd-bd8a-4abc-9ab7-674da52f3aa2.jpg?v=1710167720","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Honda Civic Hybrid FD3 - 50300-FD2-000 - RZCrewGarage","id":22882155561142,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_3884ecfd-bd8a-4abc-9ab7-674da52f3aa2.jpg?v=1710167720"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_3884ecfd-bd8a-4abc-9ab7-674da52f3aa2.jpg?v=1710167720","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-FD2-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic Hybrid | FD3 | 2006-2011 | H | LDA | I4\u003c!--split--\u003e"}

{"id":1433309937761,"title":"Spoon Rigid Collar Kit - Rear - Honda CR-V RE3\/RE4","handle":"spoon-rigid-collar-kit-rear-honda-cr-v-re3-re4-50300-rn6-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-RN6-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-V | RE3 | 2006-2018 | NA | K24A8 | I4\u003cbr\u003eCR-V | RE4 | 2006-2018 | NA | K24A8 | I4\u003c!--split--\u003e","published_at":"2018-09-23T15:14:51+08:00","created_at":"2018-09-23T15:14:52+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","collar-kits","cr-v-re3-2006-2018-na-k24a8-i4","cr-v-re4-2006-2018-na-k24a8-i4","honda","jp1","RE3\/RE4","rear","rigid-collars","spoon","ws17"],"price":17577,"price_min":17577,"price_max":17577,"available":true,"price_varies":false,"compare_at_price":18900,"compare_at_price_min":18900,"compare_at_price_max":18900,"compare_at_price_varies":false,"variants":[{"id":12435562758241,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-RN6-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Honda CR-V RE3\/RE4","public_title":null,"options":["Default Title"],"price":17577,"weight":1100,"compare_at_price":18900,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_3dba394e-fc52-44d0-985f-178e493acd67.jpg?v=1710167649"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_3dba394e-fc52-44d0-985f-178e493acd67.jpg?v=1710167649","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Honda CR-V RE3\/RE4 - 50300-RN6-000 - RZCrewGarage","id":22882142257334,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_3dba394e-fc52-44d0-985f-178e493acd67.jpg?v=1710167649"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_3dba394e-fc52-44d0-985f-178e493acd67.jpg?v=1710167649","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-RN6-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCR-V | RE3 | 2006-2018 | NA | K24A8 | I4\u003cbr\u003eCR-V | RE4 | 2006-2018 | NA | K24A8 | I4\u003c!--split--\u003e"}

{"id":1433312002145,"title":"Spoon Rigid Collar Kit - Rear - Honda Edix BE3","handle":"spoon-rigid-collar-kit-rear-honda-edix-be3-50300-rn6-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-RN6-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eEdix | BE3 | 2004-2006 | NA | K20A | I4\u003c!--split--\u003e","published_at":"2018-09-23T15:16:27+08:00","created_at":"2018-09-23T15:16:28+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2004","2005","2006","BE3","collar-kits","edix-be3-2004-2006-na-k20a-i4","honda","jp1","rear","rigid-collars","spoon","ws17"],"price":17577,"price_min":17577,"price_max":17577,"available":true,"price_varies":false,"compare_at_price":18900,"compare_at_price_min":18900,"compare_at_price_max":18900,"compare_at_price_varies":false,"variants":[{"id":12435567116385,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-RN6-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Honda Edix BE3","public_title":null,"options":["Default Title"],"price":17577,"weight":1100,"compare_at_price":18900,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_07857f9e-46ae-4436-8fb0-766f829bdd0d.jpg?v=1710167688"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_07857f9e-46ae-4436-8fb0-766f829bdd0d.jpg?v=1710167688","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Honda Edix BE3 - 50300-RN6-000 - RZCrewGarage","id":22882149499062,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_07857f9e-46ae-4436-8fb0-766f829bdd0d.jpg?v=1710167688"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_07857f9e-46ae-4436-8fb0-766f829bdd0d.jpg?v=1710167688","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-RN6-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eEdix | BE3 | 2004-2006 | NA | K20A | I4\u003c!--split--\u003e"}

{"id":1433312067681,"title":"Spoon Rigid Collar Kit - Rear - Honda Elysion RR1\/RR2\/RR3\/RR4\/RR1(Prestige)\/RR5","handle":"spoon-rigid-collar-kit-rear-honda-elysion-rr1-rr2-rr3-rr4-rr1prestige-rr5-50300-rr1-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-RR1-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eElysion | RR1 | 2004-2013 | NA | K24A2 | I4\u003cbr\u003eElysion | RR2 | 2004-2013 | NA | K24A2 | I4\u003cbr\u003eElysion | RR3 | 2004-2013 | NA | J30A | V6\u003cbr\u003eElysion | RR4 | 2004-2013 | NA | J30A | V6\u003cbr\u003eElysion Prestige | RR1 | 2004-2013 | NA | K24A2 | I4\u003cbr\u003eElysion Prestige | RR5 | 2004-2013 | NA | J35A | V6\u003c!--split--\u003e","published_at":"2018-09-23T15:16:30+08:00","created_at":"2018-09-23T15:16:31+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","collar-kits","elysion-prestige-rr1-2004-2013-na-k24a2-i4","elysion-prestige-rr5-2004-2013-na-j35a-v6","elysion-rr1-2004-2013-na-k24a2-i4","elysion-rr2-2004-2013-na-k24a2-i4","elysion-rr3-2004-2013-na-j30a-v6","elysion-rr4-2004-2013-na-j30a-v6","honda","jp1","rear","rigid-collars","RR1\/RR2\/RR3\/RR4\/RR1(Prestige)\/RR5","spoon","ws17"],"price":17577,"price_min":17577,"price_max":17577,"available":true,"price_varies":false,"compare_at_price":18900,"compare_at_price_min":18900,"compare_at_price_max":18900,"compare_at_price_varies":false,"variants":[{"id":12435567181921,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50300-RR1-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Rear - Honda Elysion RR1\/RR2\/RR3\/RR4\/RR1(Prestige)\/RR5","public_title":null,"options":["Default Title"],"price":17577,"weight":1100,"compare_at_price":18900,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_f74b1b47-8602-4bdc-a356-17d60f1e9b13.jpg?v=1710167688"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_f74b1b47-8602-4bdc-a356-17d60f1e9b13.jpg?v=1710167688","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Rear - Honda Elysion RR1\/RR2\/RR3\/RR4\/RR1(Prestige)\/RR5 - 50300-RR1-000 - RZCrewGarage","id":22882149630134,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_f74b1b47-8602-4bdc-a356-17d60f1e9b13.jpg?v=1710167688"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_f74b1b47-8602-4bdc-a356-17d60f1e9b13.jpg?v=1710167688","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50300-RR1-000\u003cbr\u003ePosition: Rear\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eElysion | RR1 | 2004-2013 | NA | K24A2 | I4\u003cbr\u003eElysion | RR2 | 2004-2013 | NA | K24A2 | I4\u003cbr\u003eElysion | RR3 | 2004-2013 | NA | J30A | V6\u003cbr\u003eElysion | RR4 | 2004-2013 | NA | J30A | V6\u003cbr\u003eElysion Prestige | RR1 | 2004-2013 | NA | K24A2 | I4\u003cbr\u003eElysion Prestige | RR5 | 2004-2013 | NA | J35A | V6\u003c!--split--\u003e"}