Subaru

{"id":1911452729441,"title":"Link Engine Management - G4+ Thunder - Standalone ECU","handle":"link-engine-management-g4-thunder-standalone-ecu-g4-t","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Link Engine Management\u003cbr\u003eReference Number: G4+T\u003cbr\u003eIntake Type: Standalone\u003cbr\u003e\u003cbr\u003eThe Thunder is a high end advanced level ECU able to manage up to 8 Cylinders, 4 Rotors engine with Peak and Hold injection and direct spark. Its casing is rated IP67 for a full dust and waterproof efficiency in any driving situation. It makes it perfect for extremely complicated tune on up to 8 cylinders engine which comes with Variable valves timing and Dual E-throttle. The G4+ Thunder runs the same microprocessor and firmware as our the G4+ Extreem which makes it ultra fast avoiding any lag during injection time resulting in premature engine failure. The firmware is also perfect for its stability avoiding erratic starts and multiple retune after its initial tuning such as piggy back ecu and other standalone Brands. In comparaison with the Xtreem ECU, the Thunder features 2x Onboard wideband lambda control, 2x E-throttle body controller, 2 EGT thermocouple inputs and a real cool 3 axis accelerometer on top of the Xtreem features such as cruise control, Advanced closed loop lambda strategy and dual bank lambda control, anti lag, rolling anti lag control, full gear shift, launch control, built in trigger oscilloscope, onboard knock control, idle valves solenoid or stepper motor control and Rotary oil metering pump control. It is really one of our favourite standalone ECU for most tuner engine needing a stable and highly efficient tuning features. Install it, tune it once and race for years!\u003cbr\u003e\u003cbr\u003eWHY CHOOSING THE Thunder:\u003cbr\u003e\u003cbr\u003e- You run a high compression atmospheric engine OR Boosted 8 cylinders\/4 rotors engine.\u003cbr\u003e- You need a refine control over your lambda sensor\u003cbr\u003e- You need full control over 2 E-throttle Bodies\u003cbr\u003e- You want to cut down on cost using its awesome features!\u003cbr\u003e- You do not want to purchase additional sensors to run it!\u003cbr\u003e- If you reply a \" YES \" To all this question than the Thunder is your choice!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e","published_at":"2018-12-10T23:07:48+08:00","created_at":"2018-12-10T23:07:50+08:00","vendor":"Link Engine Management","type":"ECU","tags":["1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2-cylinders","2-rotors","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","3-cylinders","3-rotors","4-cylinders","4-rotors","5-cylinders","6-cylinders","8-cylinders","alfa-romeo","aston-martin","audi","bmw","bmw-mini","chevrolet","citroen","civic-fd2-2007-2010-na-k20z2-i4","daihatsu","e-throttle","ecu","ferrari","fiat","ford","honda","hyundai","kia","lexus","link-engine-management","lotus","mazda","mercedes-benz","mitsubishi","nissan","opel","peak-and-hold-injection","peugeot","porsche","renault","seat","sg1","skoda","standalone","subaru","suzuki","throttle-by-cable","toyota","Universal","volkswagen","volvo","ws10"],"price":283600,"price_min":283600,"price_max":283600,"available":true,"price_varies":false,"compare_at_price":283600,"compare_at_price_min":283600,"compare_at_price_max":283600,"compare_at_price_varies":false,"variants":[{"id":18215217561697,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"G4+T","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Link Engine Management - G4+ Thunder - Standalone ECU","public_title":null,"options":["Default Title"],"price":283600,"weight":2000,"compare_at_price":283600,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/G4_T.jpg?v=1730955091"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/G4_T.jpg?v=1730955091","options":["Title"],"media":[{"alt":"Link Engine Management - G4+ Thunder - Standalone ECU - G4+T","id":28744436482230,"position":1,"preview_image":{"aspect_ratio":1.127,"height":568,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/G4_T.jpg?v=1730955091"},"aspect_ratio":1.127,"height":568,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/G4_T.jpg?v=1730955091","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Link Engine Management\u003cbr\u003eReference Number: G4+T\u003cbr\u003eIntake Type: Standalone\u003cbr\u003e\u003cbr\u003eThe Thunder is a high end advanced level ECU able to manage up to 8 Cylinders, 4 Rotors engine with Peak and Hold injection and direct spark. Its casing is rated IP67 for a full dust and waterproof efficiency in any driving situation. It makes it perfect for extremely complicated tune on up to 8 cylinders engine which comes with Variable valves timing and Dual E-throttle. The G4+ Thunder runs the same microprocessor and firmware as our the G4+ Extreem which makes it ultra fast avoiding any lag during injection time resulting in premature engine failure. The firmware is also perfect for its stability avoiding erratic starts and multiple retune after its initial tuning such as piggy back ecu and other standalone Brands. In comparaison with the Xtreem ECU, the Thunder features 2x Onboard wideband lambda control, 2x E-throttle body controller, 2 EGT thermocouple inputs and a real cool 3 axis accelerometer on top of the Xtreem features such as cruise control, Advanced closed loop lambda strategy and dual bank lambda control, anti lag, rolling anti lag control, full gear shift, launch control, built in trigger oscilloscope, onboard knock control, idle valves solenoid or stepper motor control and Rotary oil metering pump control. It is really one of our favourite standalone ECU for most tuner engine needing a stable and highly efficient tuning features. Install it, tune it once and race for years!\u003cbr\u003e\u003cbr\u003eWHY CHOOSING THE Thunder:\u003cbr\u003e\u003cbr\u003e- You run a high compression atmospheric engine OR Boosted 8 cylinders\/4 rotors engine.\u003cbr\u003e- You need a refine control over your lambda sensor\u003cbr\u003e- You need full control over 2 E-throttle Bodies\u003cbr\u003e- You want to cut down on cost using its awesome features!\u003cbr\u003e- You do not want to purchase additional sensors to run it!\u003cbr\u003e- If you reply a \" YES \" To all this question than the Thunder is your choice!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e"}

{"id":1911452696673,"title":"Link Engine Management - G4+ Xtreme - Standalone ECU","handle":"link-engine-management-g4-xtreme-standalone-ecu-g4-x","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Link Engine Management\u003cbr\u003eReference Number: G4+X\u003cbr\u003eIntake Type: Standalone\u003cbr\u003e\u003cbr\u003eThe Xtreem is a high end advanced level ECU able to manage up to 8 Cylinders, 4 Rotors engine with peak and hold injection and direct spark. Its casing is rated IP67 for a full dust and waterproof efficiency in any driving situation. It makes it perfect for extremely complicated tune on up to 8 cylinders engine which comes with Variable valves timing. The G4+ Xtreem runs the same microprocessor and firmware as our the G4+ Extreem which makes it ultra fast avoiding any lag during injection time resulting in premature engine failure. The firmware is also perfect for its stability avoiding erratic starts and multiple retune after its initial tuning such as piggy back ecu and other standalone Brands. In comparaison with the Storm ECU, the Xtreem features a lot more interesting options such as peak and hold Injection, full E-throttle control (x1), cruise control, Advanced closed loop lambda strategy and dual bank lambda control on top of the Storm anti lag, rolling anti lag control, full gear shift, launch control, built in trigger oscilloscope, onboard knock control, idle valves solenoid or stepper motor control and Rotary oil metering pump control. It is really one of our favourite standalone ECU for most tuner engine needing a stable and highly efficient tuning features. Install it, tune it once and race for years!\u003cbr\u003e\u003cbr\u003eWHY CHOOSING THE Xtreem:\u003cbr\u003e\u003cbr\u003e- You run a high compression atmospheric engine OR Boosted 8 cylinders\/4 rotors engine.\u003cbr\u003e- You run a peak and hold Injection setup and a single E-throttle body.\u003cbr\u003e- You want to cut down on cost using its awesome features!\u003cbr\u003e- You do not want to purchase additional sensors to run it!\u003cbr\u003e- If you reply a \" YES \" To all this question than the Xtreem is your choice!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e","published_at":"2018-12-10T23:07:44+08:00","created_at":"2018-12-10T23:07:45+08:00","vendor":"Link Engine Management","type":"ECU","tags":["1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2-cylinders","2-rotors","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","3-cylinders","3-rotors","4-cylinders","4-rotors","5-cylinders","6-cylinders","8-cylinders","alfa-romeo","aston-martin","audi","bmw","bmw-mini","chevrolet","citroen","civic-fd2-2007-2010-na-k20z2-i4","daihatsu","e-throttle","ecu","ferrari","fiat","ford","honda","hyundai","kia","lexus","link-engine-management","lotus","mazda","mercedes-benz","mitsubishi","nissan","opel","peak-and-hold-injection","peugeot","porsche","renault","seat","sg1","skoda","standalone","subaru","suzuki","throttle-by-cable","toyota","Universal","volkswagen","volvo","ws10"],"price":223100,"price_min":223100,"price_max":223100,"available":true,"price_varies":false,"compare_at_price":223100,"compare_at_price_min":223100,"compare_at_price_max":223100,"compare_at_price_varies":false,"variants":[{"id":18215217528929,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"G4+X","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Link Engine Management - G4+ Xtreme - Standalone ECU","public_title":null,"options":["Default Title"],"price":223100,"weight":2000,"compare_at_price":223100,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/G4_X.jpg?v=1700044157"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/G4_X.jpg?v=1700044157","options":["Title"],"media":[{"alt":"Link Engine Management - G4+ Xtreme - Standalone ECU - G4+X","id":26829685686454,"position":1,"preview_image":{"aspect_ratio":1.064,"height":282,"width":300,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/G4_X.jpg?v=1700044157"},"aspect_ratio":1.064,"height":282,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/G4_X.jpg?v=1700044157","width":300}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Link Engine Management\u003cbr\u003eReference Number: G4+X\u003cbr\u003eIntake Type: Standalone\u003cbr\u003e\u003cbr\u003eThe Xtreem is a high end advanced level ECU able to manage up to 8 Cylinders, 4 Rotors engine with peak and hold injection and direct spark. Its casing is rated IP67 for a full dust and waterproof efficiency in any driving situation. It makes it perfect for extremely complicated tune on up to 8 cylinders engine which comes with Variable valves timing. The G4+ Xtreem runs the same microprocessor and firmware as our the G4+ Extreem which makes it ultra fast avoiding any lag during injection time resulting in premature engine failure. The firmware is also perfect for its stability avoiding erratic starts and multiple retune after its initial tuning such as piggy back ecu and other standalone Brands. In comparaison with the Storm ECU, the Xtreem features a lot more interesting options such as peak and hold Injection, full E-throttle control (x1), cruise control, Advanced closed loop lambda strategy and dual bank lambda control on top of the Storm anti lag, rolling anti lag control, full gear shift, launch control, built in trigger oscilloscope, onboard knock control, idle valves solenoid or stepper motor control and Rotary oil metering pump control. It is really one of our favourite standalone ECU for most tuner engine needing a stable and highly efficient tuning features. Install it, tune it once and race for years!\u003cbr\u003e\u003cbr\u003eWHY CHOOSING THE Xtreem:\u003cbr\u003e\u003cbr\u003e- You run a high compression atmospheric engine OR Boosted 8 cylinders\/4 rotors engine.\u003cbr\u003e- You run a peak and hold Injection setup and a single E-throttle body.\u003cbr\u003e- You want to cut down on cost using its awesome features!\u003cbr\u003e- You do not want to purchase additional sensors to run it!\u003cbr\u003e- If you reply a \" YES \" To all this question than the Xtreem is your choice!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e"}

{"id":8147564855478,"title":"Link Engine Management MXS Strada 5\" Dash - Street Edition","handle":"link-engine-management-mxs-strada-5-dash-street-edition-100-0168","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Link Engine Management\u003cbr\u003eReference Number: 100-0168\u003cbr\u003eH7Type: Dash\u003cbr\u003e\u003cbr\u003eThe Link MXS Strada Street Edition dash features customisable shift lights, six street icons and a high contrast 5-inch TFT screen display. Visual quality is always optimal as the ambient light sensor auto-adjusts the brightness of the display. \u003cbr\u003e\u003cbr\u003e\n\nThe 10 multi-coloured RGB shift lights on the MXS Strada can be customised to your liking to define the RPM threshold for each single gear. There are also 6 Street Icons located to the side of the screen. These include an indicator light, headlight, high beam, check engine, oil pressure warning light and temperature warning light.\u003cbr\u003e\u003cbr\u003e\n\nThe dash is extremely easy to use, with buttons on the side to navigate through a library of preset display styles, depending on what information you want to see and in what layout. The screen can display all real-time information reading from the ECU such as RPM, speed, water temperature, oil pressure and much more. \u003cbr\u003e\u003cbr\u003e\n\nThe Link MXS connects directly to your Link ECU via the pin kit and wiring provided in the box. To use with plugin ECU’s - CANPCB and CANF connectors will be required (Purchased separately).\u003cbr\u003e\n\nThe dash can be personalised via Link ECU PC Link and Aim Technologies Race Studio 3 software. \u003cbr\u003e\u003cbr\u003e\n\nIncluded in the box: \u003cbr\u003e\nLink MXS 1.2 Strada\u003cbr\u003e\nUSB cable\u003cbr\u003e\n14 pin standard wiring\u003cbr\u003e\n23 pin connector + contacts\u003cbr\u003e\u003cbr\u003e\n\n\nGPS module available separately.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e","published_at":"2025-02-04T13:22:16+08:00","created_at":"2025-02-04T13:20:46+08:00","vendor":"Link Engine Management","type":"Console and Dash Parts","tags":["1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","alfa-romeo","aston-martin","audi","bmw","bmw-mini","chevrolet","citroen","civic-fd2-2007-2010-na-k20z2-i4","console-and-dash-parts","daihatsu","dash","e-throttle","ferrari","fiat","ford","honda","hyundai","kia","lexus","link-engine-management","lotus","mazda","mercedes-benz","mitsubishi","nissan","opel","peak-and-hold-injection","peugeot","porsche","renault","seat","skoda","subaru","suzuki","throttle-by-cable","toyota","tva","Universal","volkswagen","volvo","ws10"],"price":244850,"price_min":244850,"price_max":244850,"available":true,"price_varies":false,"compare_at_price":269000,"compare_at_price_min":269000,"compare_at_price_max":269000,"compare_at_price_varies":false,"variants":[{"id":43761922146486,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"100-0168","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Link Engine Management MXS Strada 5\" Dash - Street Edition","public_title":null,"options":["Default Title"],"price":244850,"weight":6000,"compare_at_price":269000,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/100-0168_aeaa0e22-dc0b-4794-b53f-cea3b1df7790.jpg?v=1738646446"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/100-0168_aeaa0e22-dc0b-4794-b53f-cea3b1df7790.jpg?v=1738646446","options":["Title"],"media":[{"alt":"Link Engine Management MXS Strada 5\" Dash - Street Edition - 100-0168","id":29033173024950,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/100-0168_aeaa0e22-dc0b-4794-b53f-cea3b1df7790.jpg?v=1738646446"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/100-0168_aeaa0e22-dc0b-4794-b53f-cea3b1df7790.jpg?v=1738646446","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Link Engine Management\u003cbr\u003eReference Number: 100-0168\u003cbr\u003eH7Type: Dash\u003cbr\u003e\u003cbr\u003eThe Link MXS Strada Street Edition dash features customisable shift lights, six street icons and a high contrast 5-inch TFT screen display. Visual quality is always optimal as the ambient light sensor auto-adjusts the brightness of the display. \u003cbr\u003e\u003cbr\u003e\n\nThe 10 multi-coloured RGB shift lights on the MXS Strada can be customised to your liking to define the RPM threshold for each single gear. There are also 6 Street Icons located to the side of the screen. These include an indicator light, headlight, high beam, check engine, oil pressure warning light and temperature warning light.\u003cbr\u003e\u003cbr\u003e\n\nThe dash is extremely easy to use, with buttons on the side to navigate through a library of preset display styles, depending on what information you want to see and in what layout. The screen can display all real-time information reading from the ECU such as RPM, speed, water temperature, oil pressure and much more. \u003cbr\u003e\u003cbr\u003e\n\nThe Link MXS connects directly to your Link ECU via the pin kit and wiring provided in the box. To use with plugin ECU’s - CANPCB and CANF connectors will be required (Purchased separately).\u003cbr\u003e\n\nThe dash can be personalised via Link ECU PC Link and Aim Technologies Race Studio 3 software. \u003cbr\u003e\u003cbr\u003e\n\nIncluded in the box: \u003cbr\u003e\nLink MXS 1.2 Strada\u003cbr\u003e\nUSB cable\u003cbr\u003e\n14 pin standard wiring\u003cbr\u003e\n23 pin connector + contacts\u003cbr\u003e\u003cbr\u003e\n\n\nGPS module available separately.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e"}

{"id":4473560432737,"title":"M Factory - 4.3 Final Drive - Subaru - Impreza WRX STi GDB APPLIED A to G","handle":"m-factory-4-3-final-drive-subaru-impreza-wrx-sti-gdb-applied-a-to-g-mf-trs-02stif","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: M Factory\u003cbr\u003eRatio: 4.3\u003cbr\u003e\u003cbr\u003eFinal drive gears are cut from high quality fully-carburized forged nickel-chromoly steel while also benefitting from a proprietary heat treatment process. As a result we are proud to offer enthusiasts the best final drive gears on the market today. By changing you final drive gear ratios, you can experience a dramatic increase in acceleration, giving you on average a 10-15% increase in torque throughout the entire rev-range over the OEM final drive.\u003cbr\u003e\n\nMade from imported Japanese steel these final drives are 'forged' and 'cryo-tempered' for unsurpassed toughness. As used on several Championship winning race cars. \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our European Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eImpreza WRX STi | GDB APPLIED A | 2000-2001 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED B | 2001-2002 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED C | 2002-2003 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED D | 2003-2004 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED E | 2004-2005 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED F | 2005-2006 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED G | 2006-2007 | TC | EJ207 | H4\u003c!--split--\u003e","published_at":"2020-01-15T15:38:49+08:00","created_at":"2020-01-15T15:38:50+08:00","vendor":"M Factory","type":"Final Drives","tags":["2000","2001","2002","2003","2004","2005","2006","2007","final-drives","impreza-wrx-sti-gdb-applied-a-2000-2001-tc-ej207-h4","impreza-wrx-sti-gdb-applied-b-2001-2002-tc-ej207-h4","impreza-wrx-sti-gdb-applied-c-2002-2003-tc-ej207-h4","impreza-wrx-sti-gdb-applied-d-2003-2004-tc-ej207-h4","impreza-wrx-sti-gdb-applied-e-2004-2005-tc-ej207-h4","impreza-wrx-sti-gdb-applied-f-2005-2006-tc-ej207-h4","impreza-wrx-sti-gdb-applied-g-2006-2007-tc-ej207-h4","m-factory","subaru","uk1","ws17"],"price":121560,"price_min":121560,"price_max":121560,"available":true,"price_varies":false,"compare_at_price":127400,"compare_at_price_min":127400,"compare_at_price_max":127400,"compare_at_price_varies":false,"variants":[{"id":31701707292769,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MF-TRS-02STIF","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"M Factory - 4.3 Final Drive - Subaru - Impreza WRX STi GDB APPLIED A to G","public_title":null,"options":["Default Title"],"price":121560,"weight":12000,"compare_at_price":127400,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Mfactory_final_drive_7a389a53-f739-47f6-a0ca-f3c24f9de8c3.jpg?v=1710190925"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Mfactory_final_drive_7a389a53-f739-47f6-a0ca-f3c24f9de8c3.jpg?v=1710190925","options":["Title"],"media":[{"alt":"M Factory - 4.3 Final Drive - Subaru - Impreza WRX STi GDB APPLIED A to G - MF-TRS-02STIF - RZCrewGarage","id":25428706558134,"position":1,"preview_image":{"aspect_ratio":1.159,"height":333,"width":386,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Mfactory_final_drive_7a389a53-f739-47f6-a0ca-f3c24f9de8c3.jpg?v=1710190925"},"aspect_ratio":1.159,"height":333,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Mfactory_final_drive_7a389a53-f739-47f6-a0ca-f3c24f9de8c3.jpg?v=1710190925","width":386}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: M Factory\u003cbr\u003eRatio: 4.3\u003cbr\u003e\u003cbr\u003eFinal drive gears are cut from high quality fully-carburized forged nickel-chromoly steel while also benefitting from a proprietary heat treatment process. As a result we are proud to offer enthusiasts the best final drive gears on the market today. By changing you final drive gear ratios, you can experience a dramatic increase in acceleration, giving you on average a 10-15% increase in torque throughout the entire rev-range over the OEM final drive.\u003cbr\u003e\n\nMade from imported Japanese steel these final drives are 'forged' and 'cryo-tempered' for unsurpassed toughness. As used on several Championship winning race cars. \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our European Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eImpreza WRX STi | GDB APPLIED A | 2000-2001 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED B | 2001-2002 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED C | 2002-2003 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED D | 2003-2004 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED E | 2004-2005 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED F | 2005-2006 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED G | 2006-2007 | TC | EJ207 | H4\u003c!--split--\u003e"}

{"id":7724488425654,"title":"Mishimoto Silicone Radiator Hose Kit Subaru Impreza WRX STi GDB APPLIED A to G","handle":"mishimoto-silicone-radiator-hose-kit-subaru-impreza-wrx-sti-gdb-applied-a-to-g-mmhose-wrx-01bk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-WRX-01BK\u003cbr\u003eHose Type: Water Hoses\u003cbr\u003e\u003cbr\u003eThe Mishimoto silicone hose kit for the Subaru WRX and STI is made with a dual layer, combining high-grade silicone and heat-resistant embedded fibres to provide efficient heat reduction and increased pressure tolerance, all with an OEM replacement fit! Perfect for your GD chassis Subaru WRX or STI.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eImpreza WRX STi | GDB APPLIED A | 2000-2001 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED B | 2001-2002 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED C | 2002-2003 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED D | 2003-2004 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED E | 2004-2005 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED F | 2005-2006 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED G | 2006-2007 | TC | EJ207 | H4\u003c!--split--\u003e","published_at":"2023-11-28T14:28:10+08:00","created_at":"2023-11-28T14:25:53+08:00","vendor":"Mishimoto","type":"Cooling Hoses","tags":["2000","2001","2002","2003","2004","2005","2006","2007","cooling","cooling-hoses","coolinghoses","impreza-wrx-sti-gdb-applied-a-2000-2001-tc-ej207-h4","impreza-wrx-sti-gdb-applied-b-2001-2002-tc-ej207-h4","impreza-wrx-sti-gdb-applied-c-2002-2003-tc-ej207-h4","impreza-wrx-sti-gdb-applied-d-2003-2004-tc-ej207-h4","impreza-wrx-sti-gdb-applied-e-2004-2005-tc-ej207-h4","impreza-wrx-sti-gdb-applied-f-2005-2006-tc-ej207-h4","impreza-wrx-sti-gdb-applied-g-2006-2007-tc-ej207-h4","mishimoto","subaru","us1","ws137"],"price":19710,"price_min":19710,"price_max":19710,"available":true,"price_varies":false,"compare_at_price":29500,"compare_at_price_min":29500,"compare_at_price_max":29500,"compare_at_price_varies":false,"variants":[{"id":42517815460022,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-WRX-01BK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto Silicone Radiator Hose Kit Subaru Impreza WRX STi GDB APPLIED A to G","public_title":null,"options":["Default Title"],"price":19710,"weight":5226,"compare_at_price":29500,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/mishimoto-silicone-radiator-hose-kit-subaru-impreza-wrx-sti-gdb-applied-a-to-g-rzcrew.jpg?v=1710314432"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/mishimoto-silicone-radiator-hose-kit-subaru-impreza-wrx-sti-gdb-applied-a-to-g-rzcrew.jpg?v=1710314432","options":["Title"],"media":[{"alt":"Mishimoto Silicone Radiator Hose Kit Subaru Impreza WRX STi GDB APPLIED A to G - MMHOSE-WRX-01BK - RZCREWGARAGE","id":26880453378230,"position":1,"preview_image":{"aspect_ratio":1.4,"height":300,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/mishimoto-silicone-radiator-hose-kit-subaru-impreza-wrx-sti-gdb-applied-a-to-g-rzcrew.jpg?v=1710314432"},"aspect_ratio":1.4,"height":300,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/mishimoto-silicone-radiator-hose-kit-subaru-impreza-wrx-sti-gdb-applied-a-to-g-rzcrew.jpg?v=1710314432","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-WRX-01BK\u003cbr\u003eHose Type: Water Hoses\u003cbr\u003e\u003cbr\u003eThe Mishimoto silicone hose kit for the Subaru WRX and STI is made with a dual layer, combining high-grade silicone and heat-resistant embedded fibres to provide efficient heat reduction and increased pressure tolerance, all with an OEM replacement fit! Perfect for your GD chassis Subaru WRX or STI.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eImpreza WRX STi | GDB APPLIED A | 2000-2001 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED B | 2001-2002 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED C | 2002-2003 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED D | 2003-2004 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED E | 2004-2005 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED F | 2005-2006 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED G | 2006-2007 | TC | EJ207 | H4\u003c!--split--\u003e"}

{"id":6097366319286,"title":"Mishimoto - Performance Aluminium Radiator - Subaru - Forester SG5 APPLIED A to F (MT)","handle":"mishimoto-performance-aluminium-radiator-subaru-forester-sg5-applied-a-to-f-mt-mmrad-fxt-04","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMRAD-FXT-04\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003eDirect fit for the 2004–2008 Subaru Forester XT\u003cbr\u003e\nFull aluminum construction with durable, TIG-welded end tanks\u003cbr\u003e\nFeatures a two-row, 1.65\" thick efficient brazed aluminum core, providing ideal fluid temperature reduction\u003cbr\u003e\nIncreased fluid capacity and superior heat dissipation\u003cbr\u003e\nPerfect upgrade to the failure prone stock plastic end tank radiator\u003cbr\u003e\nIdeal for use on the street, track, or rallycross course\u003cbr\u003e\nIncludes 1.3 Bar High-Pressure Radiator Cap which effectively raises the boiling point of engine coolant, providing a safer and more efficient system\u003cbr\u003e\nIncludes Magnetic Drain Plug to capture any metallic debris\/fragments in your cooling system\u003cbr\u003e\nMishimoto Lifetime Warranty\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 5 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eForester | SG5 APPLIED A | 2002-2003 | TC | EJ20T | H4\u003cbr\u003eForester | SG5 APPLIED B | 2003-2004 | TC | EJ20T | H4\u003cbr\u003eForester | SG5 APPLIED C | 2004-2004 | TC | EJ20T | H4\u003cbr\u003eForester | SG5 APPLIED D | 2005-2005 | TC | EJ20T | H4\u003cbr\u003eForester | SG5 APPLIED E | 2005-2006 | TC | EJ20T | H4\u003cbr\u003eForester | SG5 APPLIED F | 2007-2007 | TC | EJ20T | H4\u003cbr\u003e\u003cbr\u003eNote: MT Only!\u003c!--split--\u003eMT Only!","published_at":"2020-11-22T14:40:46+08:00","created_at":"2020-11-22T14:40:48+08:00","vendor":"Mishimoto","type":"Radiators","tags":["2002","2003","2004","2005","2006","2007","cooling","forester-sg5-applied-a-2002-2003-tc-ej20t-h4","forester-sg5-applied-b-2003-2004-tc-ej20t-h4","forester-sg5-applied-c-2004-2004-tc-ej20t-h4","forester-sg5-applied-d-2005-2005-tc-ej20t-h4","forester-sg5-applied-e-2005-2006-tc-ej20t-h4","forester-sg5-applied-f-2007-2007-tc-ej20t-h4","mishimoto","mt","radiators","subaru","us1","ws125"],"price":57270,"price_min":57270,"price_max":57270,"available":true,"price_varies":false,"compare_at_price":70400,"compare_at_price_min":70400,"compare_at_price_max":70400,"compare_at_price_varies":false,"variants":[{"id":37591130210486,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMRAD-FXT-04","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Performance Aluminium Radiator - Subaru - Forester SG5 APPLIED A to F (MT)","public_title":null,"options":["Default Title"],"price":57270,"weight":11212,"compare_at_price":70400,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMRAD-FXT-04_e6b6c8fe-ea54-4124-9275-46c1ecf38003.jpg?v=1710194613"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMRAD-FXT-04_e6b6c8fe-ea54-4124-9275-46c1ecf38003.jpg?v=1710194613","options":["Title"],"media":[{"alt":"Mishimoto - Performance Aluminium Radiator - Subaru - Forester SG5 APPLIED A to F (MT) - MMRAD-FXT-04 - RZCREWGARAGE","id":25382051971254,"position":1,"preview_image":{"aspect_ratio":1.0,"height":700,"width":700,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMRAD-FXT-04_e6b6c8fe-ea54-4124-9275-46c1ecf38003.jpg?v=1710194613"},"aspect_ratio":1.0,"height":700,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMRAD-FXT-04_e6b6c8fe-ea54-4124-9275-46c1ecf38003.jpg?v=1710194613","width":700}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMRAD-FXT-04\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003eDirect fit for the 2004–2008 Subaru Forester XT\u003cbr\u003e\nFull aluminum construction with durable, TIG-welded end tanks\u003cbr\u003e\nFeatures a two-row, 1.65\" thick efficient brazed aluminum core, providing ideal fluid temperature reduction\u003cbr\u003e\nIncreased fluid capacity and superior heat dissipation\u003cbr\u003e\nPerfect upgrade to the failure prone stock plastic end tank radiator\u003cbr\u003e\nIdeal for use on the street, track, or rallycross course\u003cbr\u003e\nIncludes 1.3 Bar High-Pressure Radiator Cap which effectively raises the boiling point of engine coolant, providing a safer and more efficient system\u003cbr\u003e\nIncludes Magnetic Drain Plug to capture any metallic debris\/fragments in your cooling system\u003cbr\u003e\nMishimoto Lifetime Warranty\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 5 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eForester | SG5 APPLIED A | 2002-2003 | TC | EJ20T | H4\u003cbr\u003eForester | SG5 APPLIED B | 2003-2004 | TC | EJ20T | H4\u003cbr\u003eForester | SG5 APPLIED C | 2004-2004 | TC | EJ20T | H4\u003cbr\u003eForester | SG5 APPLIED D | 2005-2005 | TC | EJ20T | H4\u003cbr\u003eForester | SG5 APPLIED E | 2005-2006 | TC | EJ20T | H4\u003cbr\u003eForester | SG5 APPLIED F | 2007-2007 | TC | EJ20T | H4\u003cbr\u003e\u003cbr\u003eNote: MT Only!\u003c!--split--\u003eMT Only!"}

{"id":6097368187062,"title":"Mishimoto - Performance Aluminium Radiator - Subaru - Impreza WRX STi GDB APPLIED A to G (MT)","handle":"mishimoto-performance-aluminium-radiator-subaru-impreza-wrx-sti-gdb-applied-a-to-g-mt-mmrad-wrx-01","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMRAD-WRX-01\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003eFull aluminum construction provides increased heat and pressure tolerance, improved heat dissipation, increased durability, and improved cooling efficiency\u003cbr\u003e\nManufactured with robust TIG-welded end tanks for improved strength and extended service\u003cbr\u003e\n100% brazed aluminum core for maximum reliability\u003cbr\u003e\nIncreased coolant capacity directly results in improved cooling efficiency\u003cbr\u003e\nIncluded 1.3 bar radiator cap raises the boiling point of engine coolant to provide a safer and more efficient system\u003cbr\u003e\nDesigned to original equipment specifications for the 2001–2007 WRX and STI\u003cbr\u003e\nMishimoto Lifetime Warranty\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eImpreza WRX STi | GDB APPLIED A | 2000-2001 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED B | 2001-2002 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED C | 2002-2003 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED D | 2003-2004 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED E | 2004-2005 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED F | 2005-2006 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED G | 2006-2007 | TC | EJ207 | H4\u003cbr\u003e\u003cbr\u003eNote: MT Only!\u003c!--split--\u003eMT Only!","published_at":"2020-11-22T14:42:07+08:00","created_at":"2020-11-22T14:42:10+08:00","vendor":"Mishimoto","type":"Radiators","tags":["2000","2001","2002","2003","2004","2005","2006","2007","cooling","impreza-wrx-sti-gdb-applied-a-2000-2001-tc-ej207-h4","impreza-wrx-sti-gdb-applied-b-2001-2002-tc-ej207-h4","impreza-wrx-sti-gdb-applied-c-2002-2003-tc-ej207-h4","impreza-wrx-sti-gdb-applied-d-2003-2004-tc-ej207-h4","impreza-wrx-sti-gdb-applied-e-2004-2005-tc-ej207-h4","impreza-wrx-sti-gdb-applied-f-2005-2006-tc-ej207-h4","impreza-wrx-sti-gdb-applied-g-2006-2007-tc-ej207-h4","mishimoto","mt","radiators","subaru","us1","ws125"],"price":48040,"price_min":48040,"price_max":48040,"available":true,"price_varies":false,"compare_at_price":59000,"compare_at_price_min":59000,"compare_at_price_max":59000,"compare_at_price_varies":false,"variants":[{"id":37591131488438,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMRAD-WRX-01","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Performance Aluminium Radiator - Subaru - Impreza WRX STi GDB APPLIED A to G (MT)","public_title":null,"options":["Default Title"],"price":48040,"weight":11121,"compare_at_price":59000,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMRAD-WRX-01_5a038227-6276-4bba-826a-48b0fbeec4bb.jpg?v=1710194635"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMRAD-WRX-01_5a038227-6276-4bba-826a-48b0fbeec4bb.jpg?v=1710194635","options":["Title"],"media":[{"alt":"Mishimoto - Performance Aluminium Radiator - Subaru - Impreza WRX STi GDB APPLIED A to G (MT) - MMRAD-WRX-01 - RZCREWGARAGE","id":25382063734966,"position":1,"preview_image":{"aspect_ratio":1.0,"height":700,"width":700,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMRAD-WRX-01_5a038227-6276-4bba-826a-48b0fbeec4bb.jpg?v=1710194635"},"aspect_ratio":1.0,"height":700,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMRAD-WRX-01_5a038227-6276-4bba-826a-48b0fbeec4bb.jpg?v=1710194635","width":700}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMRAD-WRX-01\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003eFull aluminum construction provides increased heat and pressure tolerance, improved heat dissipation, increased durability, and improved cooling efficiency\u003cbr\u003e\nManufactured with robust TIG-welded end tanks for improved strength and extended service\u003cbr\u003e\n100% brazed aluminum core for maximum reliability\u003cbr\u003e\nIncreased coolant capacity directly results in improved cooling efficiency\u003cbr\u003e\nIncluded 1.3 bar radiator cap raises the boiling point of engine coolant to provide a safer and more efficient system\u003cbr\u003e\nDesigned to original equipment specifications for the 2001–2007 WRX and STI\u003cbr\u003e\nMishimoto Lifetime Warranty\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eImpreza WRX STi | GDB APPLIED A | 2000-2001 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED B | 2001-2002 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED C | 2002-2003 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED D | 2003-2004 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED E | 2004-2005 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED F | 2005-2006 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GDB APPLIED G | 2006-2007 | TC | EJ207 | H4\u003cbr\u003e\u003cbr\u003eNote: MT Only!\u003c!--split--\u003eMT Only!"}

{"id":6097367924918,"title":"Mishimoto - Performance Aluminium Radiator - Subaru - Impreza WRX STi GRB\/GVB (MT)","handle":"mishimoto-performance-aluminium-radiator-subaru-impreza-wrx-sti-grb-gvb-mt-mmrad-sti-08","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMRAD-STI-08\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003eDirect fit for the 2008-2014 WRX and 2008-2019 STI\u003cbr\u003e\nFull aluminum construction including durable, TIG-welded end tanks\u003cbr\u003e\nTwo-row, 1.65\" thick brazed aluminum core\u003cbr\u003e\nIncreased fluid capacity and optimal heat dissipation\u003cbr\u003e\nProvides efficient temperature reduction for use on the street, track, rallycross, or autocross course\u003cbr\u003e\nIncludes 1.3 Bar High-Pressure Radiator Cap , which effectively raises the boiling point of engine coolant and provides a safer, more efficient system\u003cbr\u003e\nIncludes Magnetic Drain Plug to capture any metallic debris\/fragments in your cooling system\u003cbr\u003e\nMishimoto Lifetime Warranty\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eImpreza WRX STi | GRB APPLIED A | 2007-2009 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GRB APPLIED B | 2009-2009 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GRB APPLIED C | 2010-2012 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GRB APPLIED D | 2012-2013 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GRB APPLIED E | 2013-2014 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GVB APPLIED C | 2007-2012 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GVB APPLIED D | 2012-2013 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GVB APPLIED E | 2013-2014 | TC | EJ207 | H4\u003cbr\u003e\u003cbr\u003eNote: MT Only!\u003c!--split--\u003eMT Only!","published_at":"2020-11-22T14:41:45+08:00","created_at":"2020-11-22T14:41:47+08:00","vendor":"Mishimoto","type":"Radiators","tags":["2007","2008","2009","2010","2011","2012","2013","2014","cooling","impreza-wrx-sti-grb-applied-a-2007-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-b-2009-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-c-2010-2012-tc-ej207-h4","impreza-wrx-sti-grb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-grb-applied-e-2013-2014-tc-ej207-h4","impreza-wrx-sti-gvb-applied-c-2007-2012-tc-ej207-h4","impreza-wrx-sti-gvb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-gvb-applied-e-2013-2014-tc-ej207-h4","mishimoto","mt","radiators","subaru","us1","ws125"],"price":53400,"price_min":53400,"price_max":53400,"available":true,"price_varies":false,"compare_at_price":65600,"compare_at_price_min":65600,"compare_at_price_max":65600,"compare_at_price_varies":false,"variants":[{"id":37591131193526,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMRAD-STI-08","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Performance Aluminium Radiator - Subaru - Impreza WRX STi GRB\/GVB (MT)","public_title":null,"options":["Default Title"],"price":53400,"weight":10441,"compare_at_price":65600,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMRAD-STI-08_d54b0f5a-dda5-459a-b038-700deb316063.jpg?v=1710194633"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMRAD-STI-08_d54b0f5a-dda5-459a-b038-700deb316063.jpg?v=1710194633","options":["Title"],"media":[{"alt":"Mishimoto - Performance Aluminium Radiator - Subaru - Impreza WRX STi GRB\/GVB (MT) - MMRAD-STI-08 - RZCREWGARAGE","id":25382060622006,"position":1,"preview_image":{"aspect_ratio":1.0,"height":700,"width":700,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMRAD-STI-08_d54b0f5a-dda5-459a-b038-700deb316063.jpg?v=1710194633"},"aspect_ratio":1.0,"height":700,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMRAD-STI-08_d54b0f5a-dda5-459a-b038-700deb316063.jpg?v=1710194633","width":700}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMRAD-STI-08\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003eDirect fit for the 2008-2014 WRX and 2008-2019 STI\u003cbr\u003e\nFull aluminum construction including durable, TIG-welded end tanks\u003cbr\u003e\nTwo-row, 1.65\" thick brazed aluminum core\u003cbr\u003e\nIncreased fluid capacity and optimal heat dissipation\u003cbr\u003e\nProvides efficient temperature reduction for use on the street, track, rallycross, or autocross course\u003cbr\u003e\nIncludes 1.3 Bar High-Pressure Radiator Cap , which effectively raises the boiling point of engine coolant and provides a safer, more efficient system\u003cbr\u003e\nIncludes Magnetic Drain Plug to capture any metallic debris\/fragments in your cooling system\u003cbr\u003e\nMishimoto Lifetime Warranty\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eImpreza WRX STi | GRB APPLIED A | 2007-2009 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GRB APPLIED B | 2009-2009 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GRB APPLIED C | 2010-2012 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GRB APPLIED D | 2012-2013 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GRB APPLIED E | 2013-2014 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GVB APPLIED C | 2007-2012 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GVB APPLIED D | 2012-2013 | TC | EJ207 | H4\u003cbr\u003eImpreza WRX STi | GVB APPLIED E | 2013-2014 | TC | EJ207 | H4\u003cbr\u003e\u003cbr\u003eNote: MT Only!\u003c!--split--\u003eMT Only!"}

{"id":561999020059,"title":"Mishimoto - Subaru Forester XT Turbo Silicone Hose Kit - Black - SG5 - MMHOSE-FXT-04BK","handle":"mishimoto-subaru-forester-xt-turbo-silicone-hose-kit-black-sg5-mmhose-fxt-04bk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-FXT-04BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2004–2008 Subaru Forester XT\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Silicone Hoses\u003cbr\u003e\u003cbr\u003eChassis Codes SG5\u003cbr\u003eEngine Codes EJ255\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 1.90\" \u003cbr\u003eHose 2: 1.90\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 1.50\" \u003cbr\u003eHose 2: 1.50\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's hoses for the Subaru Forester XT Turbo are made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hoses. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2004–2008 Subaru Forester XT\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Silicone Hoses\u003cbr\u003e\u003cbr\u003eChassis Codes SG5\u003cbr\u003eEngine Codes EJ255\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 1.90\" \u003cbr\u003eHose 2: 1.90\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 1.50\" \u003cbr\u003eHose 2: 1.50\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's hoses for the Subaru Forester XT Turbo are made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hoses. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:26:24+08:00","created_at":"2018-01-24T23:26:25+08:00","vendor":"Mishimoto","type":"F\/I System Hoses","tags":["2002","2003","2004","2005","2006","2007","f-i-system-hoses","forester-sg5-applied-a-2002-2003-tc-ej20t-h4","forester-sg5-applied-b-2003-2004-tc-ej20t-h4","forester-sg5-applied-c-2004-2004-tc-ej20t-h4","forester-sg5-applied-d-2005-2005-tc-ej20t-h4","forester-sg5-applied-e-2005-2006-tc-ej20t-h4","forester-sg5-applied-f-2007-2007-tc-ej20t-h4","mishimoto","subaru","turbo-hoses-kits","us1","ws136"],"price":15330,"price_min":15330,"price_max":15330,"available":true,"price_varies":false,"compare_at_price":22400,"compare_at_price_min":22400,"compare_at_price_max":22400,"compare_at_price_varies":false,"variants":[{"id":5990398296091,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-FXT-04BK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru Forester XT Turbo Silicone Hose Kit - Black - SG5 - MMHOSE-FXT-04BK","public_title":null,"options":["Default Title"],"price":15330,"weight":4499,"compare_at_price":22400,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-FXT-04BK.jpg?v=1710154162"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-FXT-04BK.jpg?v=1710154162","options":["Title"],"media":[{"alt":"Mishimoto - Subaru Forester XT Turbo Silicone Hose Kit - Black - SG5 - MMHOSE-FXT-04BK - Rzcrewgarage","id":1351404519521,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-FXT-04BK.jpg?v=1710154162"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-FXT-04BK.jpg?v=1710154162","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-FXT-04BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2004–2008 Subaru Forester XT\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Silicone Hoses\u003cbr\u003e\u003cbr\u003eChassis Codes SG5\u003cbr\u003eEngine Codes EJ255\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 1.90\" \u003cbr\u003eHose 2: 1.90\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 1.50\" \u003cbr\u003eHose 2: 1.50\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's hoses for the Subaru Forester XT Turbo are made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hoses. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2004–2008 Subaru Forester XT\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Silicone Hoses\u003cbr\u003e\u003cbr\u003eChassis Codes SG5\u003cbr\u003eEngine Codes EJ255\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 1.90\" \u003cbr\u003eHose 2: 1.90\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 1.50\" \u003cbr\u003eHose 2: 1.50\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's hoses for the Subaru Forester XT Turbo are made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hoses. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561999052827,"title":"Mishimoto - Subaru Forester XT Turbo Silicone Hose Kit - Blue - SG5 - MMHOSE-FXT-04BL","handle":"mishimoto-subaru-forester-xt-turbo-silicone-hose-kit-blue-sg5-mmhose-fxt-04bl","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-FXT-04BL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2004–2008 Subaru Forester XT\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Silicone Hoses\u003cbr\u003e\u003cbr\u003eChassis Codes SG5\u003cbr\u003eEngine Codes EJ255\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 1.90\" \u003cbr\u003eHose 2: 1.90\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 1.50\" \u003cbr\u003eHose 2: 1.50\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's hoses for the Subaru Forester XT Turbo are made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hoses. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2004–2008 Subaru Forester XT\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Silicone Hoses\u003cbr\u003e\u003cbr\u003eChassis Codes SG5\u003cbr\u003eEngine Codes EJ255\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 1.90\" \u003cbr\u003eHose 2: 1.90\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 1.50\" \u003cbr\u003eHose 2: 1.50\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's hoses for the Subaru Forester XT Turbo are made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hoses. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:26:25+08:00","created_at":"2018-01-24T23:26:26+08:00","vendor":"Mishimoto","type":"F\/I System Hoses","tags":["2002","2003","2004","2005","2006","2007","f-i-system-hoses","forester-sg5-applied-a-2002-2003-tc-ej20t-h4","forester-sg5-applied-b-2003-2004-tc-ej20t-h4","forester-sg5-applied-c-2004-2004-tc-ej20t-h4","forester-sg5-applied-d-2005-2005-tc-ej20t-h4","forester-sg5-applied-e-2005-2006-tc-ej20t-h4","forester-sg5-applied-f-2007-2007-tc-ej20t-h4","mishimoto","subaru","turbo-hoses-kits","us1","ws136"],"price":15330,"price_min":15330,"price_max":15330,"available":true,"price_varies":false,"compare_at_price":22400,"compare_at_price_min":22400,"compare_at_price_max":22400,"compare_at_price_varies":false,"variants":[{"id":5990398328859,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-FXT-04BL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru Forester XT Turbo Silicone Hose Kit - Blue - SG5 - MMHOSE-FXT-04BL","public_title":null,"options":["Default Title"],"price":15330,"weight":4454,"compare_at_price":22400,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-FXT-04BL.jpg?v=1710154163"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-FXT-04BL.jpg?v=1710154163","options":["Title"],"media":[{"alt":"Mishimoto - Subaru Forester XT Turbo Silicone Hose Kit - Blue - SG5 - MMHOSE-FXT-04BL - Rzcrewgarage","id":1351404552289,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-FXT-04BL.jpg?v=1710154163"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-FXT-04BL.jpg?v=1710154163","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-FXT-04BL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2004–2008 Subaru Forester XT\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Silicone Hoses\u003cbr\u003e\u003cbr\u003eChassis Codes SG5\u003cbr\u003eEngine Codes EJ255\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 1.90\" \u003cbr\u003eHose 2: 1.90\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 1.50\" \u003cbr\u003eHose 2: 1.50\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's hoses for the Subaru Forester XT Turbo are made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hoses. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2004–2008 Subaru Forester XT\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Silicone Hoses\u003cbr\u003e\u003cbr\u003eChassis Codes SG5\u003cbr\u003eEngine Codes EJ255\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 1.90\" \u003cbr\u003eHose 2: 1.90\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 1.50\" \u003cbr\u003eHose 2: 1.50\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's hoses for the Subaru Forester XT Turbo are made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hoses. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561999118363,"title":"Mishimoto - Subaru Forester XT Turbo Silicone Hose Kit - Red - SG5 - MMHOSE-FXT-04RD","handle":"mishimoto-subaru-forester-xt-turbo-silicone-hose-kit-red-sg5-mmhose-fxt-04rd","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-FXT-04RD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2004–2008 Subaru Forester XT\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Silicone Hoses\u003cbr\u003e\u003cbr\u003eChassis Codes SG5\u003cbr\u003eEngine Codes EJ255\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 1.90\" \u003cbr\u003eHose 2: 1.90\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 1.50\" \u003cbr\u003eHose 2: 1.50\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's hoses for the Subaru Forester XT Turbo are made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hoses. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2004–2008 Subaru Forester XT\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Silicone Hoses\u003cbr\u003e\u003cbr\u003eChassis Codes SG5\u003cbr\u003eEngine Codes EJ255\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 1.90\" \u003cbr\u003eHose 2: 1.90\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 1.50\" \u003cbr\u003eHose 2: 1.50\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's hoses for the Subaru Forester XT Turbo are made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hoses. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:26:26+08:00","created_at":"2018-01-24T23:26:26+08:00","vendor":"Mishimoto","type":"F\/I System Hoses","tags":["2002","2003","2004","2005","2006","2007","f-i-system-hoses","forester-sg5-applied-a-2002-2003-tc-ej20t-h4","forester-sg5-applied-b-2003-2004-tc-ej20t-h4","forester-sg5-applied-c-2004-2004-tc-ej20t-h4","forester-sg5-applied-d-2005-2005-tc-ej20t-h4","forester-sg5-applied-e-2005-2006-tc-ej20t-h4","forester-sg5-applied-f-2007-2007-tc-ej20t-h4","mishimoto","subaru","turbo-hoses-kits","us1","ws136"],"price":15330,"price_min":15330,"price_max":15330,"available":true,"price_varies":false,"compare_at_price":22400,"compare_at_price_min":22400,"compare_at_price_max":22400,"compare_at_price_varies":false,"variants":[{"id":5990398394395,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-FXT-04RD","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru Forester XT Turbo Silicone Hose Kit - Red - SG5 - MMHOSE-FXT-04RD","public_title":null,"options":["Default Title"],"price":15330,"weight":4499,"compare_at_price":22400,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-FXT-04RD.jpg?v=1710154163"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-FXT-04RD.jpg?v=1710154163","options":["Title"],"media":[{"alt":"Mishimoto - Subaru Forester XT Turbo Silicone Hose Kit - Red - SG5 - MMHOSE-FXT-04RD - Rzcrewgarage","id":1351404585057,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-FXT-04RD.jpg?v=1710154163"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-FXT-04RD.jpg?v=1710154163","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-FXT-04RD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2004–2008 Subaru Forester XT\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Silicone Hoses\u003cbr\u003e\u003cbr\u003eChassis Codes SG5\u003cbr\u003eEngine Codes EJ255\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 1.90\" \u003cbr\u003eHose 2: 1.90\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 1.50\" \u003cbr\u003eHose 2: 1.50\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's hoses for the Subaru Forester XT Turbo are made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hoses. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2004–2008 Subaru Forester XT\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Silicone Hoses\u003cbr\u003e\u003cbr\u003eChassis Codes SG5\u003cbr\u003eEngine Codes EJ255\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 1.90\" \u003cbr\u003eHose 2: 1.90\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 1.50\" \u003cbr\u003eHose 2: 1.50\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's hoses for the Subaru Forester XT Turbo are made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hoses. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":562002395163,"title":"Mishimoto - Subaru Impreza WRX\/STI Silicone 76mm Airbox Hose - Black - GDA GDB APPLIED C to G - MMHOSE-WRX-AM7BK","handle":"mishimoto-subaru-impreza-wrx-sti-silicone-76mm-airbox-hose-black-gda-gdb-applied-c-to-g-mmhose-wrx-am7bk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-WRX-AM7BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2002–2007 Subaru WRX and STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eIncreased pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 3.30\" \u0026amp; 3.39\"\u003cbr\u003eInner Diameter 2.90\" \u0026amp; 2.99\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto Silicone 76mm Airbox Hose for the Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hose. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2002–2007 Subaru WRX and STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eIncreased pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 3.30\" \u0026amp; 3.39\"\u003cbr\u003eInner Diameter 2.90\" \u0026amp; 2.99\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto Silicone 76mm Airbox Hose for the Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hose. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 5 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:26:53+08:00","created_at":"2018-01-24T23:26:53+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["2002","2003","2004","2005","2006","2007","impreza-wrx-gda-applied-d-2003-2004-tc-ej207-h4","impreza-wrx-gda-applied-e-2004-2005-tc-ej207-h4","impreza-wrx-gda-applied-f-2005-2006-tc-ej207-h4","impreza-wrx-gda-applied-g-2006-2007-tc-ej207-h4","impreza-wrx-sti-gdb-applied-d-2003-2004-tc-ej207-h4","impreza-wrx-sti-gdb-applied-e-2004-2005-tc-ej207-h4","impreza-wrx-sti-gdb-applied-f-2005-2006-tc-ej207-h4","impreza-wrx-sti-gdb-applied-g-2006-2007-tc-ej207-h4","intake","intake-hoses","mishimoto","subaru","us1","ws136"],"price":11500,"price_min":11500,"price_max":11500,"available":true,"price_varies":false,"compare_at_price":16800,"compare_at_price_min":16800,"compare_at_price_max":16800,"compare_at_price_varies":false,"variants":[{"id":5990401966107,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-WRX-AM7BK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru Impreza WRX\/STI Silicone 76mm Airbox Hose - Black - GDA GDB APPLIED C to G - MMHOSE-WRX-AM7BK","public_title":null,"options":["Default Title"],"price":11500,"weight":4454,"compare_at_price":16800,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-AM7BK.jpg?v=1710154191"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-AM7BK.jpg?v=1710154191","options":["Title"],"media":[{"alt":"Mishimoto - Subaru Impreza WRX\/STI Silicone 76mm Airbox Hose - Black - GDA GDB APPLIED C to G - MMHOSE-WRX-AM7BK - Rzcrewgarage","id":1351405961313,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-AM7BK.jpg?v=1710154191"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-AM7BK.jpg?v=1710154191","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-WRX-AM7BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2002–2007 Subaru WRX and STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eIncreased pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 3.30\" \u0026amp; 3.39\"\u003cbr\u003eInner Diameter 2.90\" \u0026amp; 2.99\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto Silicone 76mm Airbox Hose for the Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hose. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2002–2007 Subaru WRX and STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eIncreased pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 3.30\" \u0026amp; 3.39\"\u003cbr\u003eInner Diameter 2.90\" \u0026amp; 2.99\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto Silicone 76mm Airbox Hose for the Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hose. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 5 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":562002427931,"title":"Mishimoto - Subaru Impreza WRX\/STI Silicone 76mm Airbox Hose - Blue - GDA GDB APPLIED C to G - MMHOSE-WRX-AM7BL","handle":"mishimoto-subaru-impreza-wrx-sti-silicone-76mm-airbox-hose-blue-gda-gdb-applied-c-to-g-mmhose-wrx-am7bl","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-WRX-AM7BL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2002–2007 Subaru WRX and STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eIncreased pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 3.30\" \u0026amp; 3.39\"\u003cbr\u003eInner Diameter 2.90\" \u0026amp; 2.99\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto Silicone 76mm Airbox Hose for the Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hose. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2002–2007 Subaru WRX and STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eIncreased pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 3.30\" \u0026amp; 3.39\"\u003cbr\u003eInner Diameter 2.90\" \u0026amp; 2.99\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto Silicone 76mm Airbox Hose for the Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hose. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 4 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:26:53+08:00","created_at":"2018-01-24T23:26:54+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["2002","2003","2004","2005","2006","2007","impreza-wrx-gda-applied-d-2003-2004-tc-ej207-h4","impreza-wrx-gda-applied-e-2004-2005-tc-ej207-h4","impreza-wrx-gda-applied-f-2005-2006-tc-ej207-h4","impreza-wrx-gda-applied-g-2006-2007-tc-ej207-h4","impreza-wrx-sti-gdb-applied-d-2003-2004-tc-ej207-h4","impreza-wrx-sti-gdb-applied-e-2004-2005-tc-ej207-h4","impreza-wrx-sti-gdb-applied-f-2005-2006-tc-ej207-h4","impreza-wrx-sti-gdb-applied-g-2006-2007-tc-ej207-h4","intake","intake-hoses","mishimoto","subaru","us1","ws136"],"price":11500,"price_min":11500,"price_max":11500,"available":true,"price_varies":false,"compare_at_price":16800,"compare_at_price_min":16800,"compare_at_price_max":16800,"compare_at_price_varies":false,"variants":[{"id":5990401998875,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-WRX-AM7BL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru Impreza WRX\/STI Silicone 76mm Airbox Hose - Blue - GDA GDB APPLIED C to G - MMHOSE-WRX-AM7BL","public_title":null,"options":["Default Title"],"price":11500,"weight":4544,"compare_at_price":16800,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-AM7BL.jpg?v=1710154191"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-AM7BL.jpg?v=1710154191","options":["Title"],"media":[{"alt":"Mishimoto - Subaru Impreza WRX\/STI Silicone 76mm Airbox Hose - Blue - GDA GDB APPLIED C to G - MMHOSE-WRX-AM7BL - Rzcrewgarage","id":1351405994081,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-AM7BL.jpg?v=1710154191"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-AM7BL.jpg?v=1710154191","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-WRX-AM7BL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2002–2007 Subaru WRX and STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eIncreased pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 3.30\" \u0026amp; 3.39\"\u003cbr\u003eInner Diameter 2.90\" \u0026amp; 2.99\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto Silicone 76mm Airbox Hose for the Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hose. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2002–2007 Subaru WRX and STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eIncreased pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 3.30\" \u0026amp; 3.39\"\u003cbr\u003eInner Diameter 2.90\" \u0026amp; 2.99\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto Silicone 76mm Airbox Hose for the Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hose. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 4 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":562002460699,"title":"Mishimoto - Subaru Impreza WRX\/STI Silicone 76mm Airbox Hose - Red - GDA GDB APPLIED C to G - MMHOSE-WRX-AM7RD","handle":"mishimoto-subaru-impreza-wrx-sti-silicone-76mm-airbox-hose-red-gda-gdb-applied-c-to-g-mmhose-wrx-am7rd","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-WRX-AM7RD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2002–2007 Subaru WRX and STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eIncreased pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 3.30\" \u0026amp; 3.39\"\u003cbr\u003eInner Diameter 2.90\" \u0026amp; 2.99\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto Silicone 76mm Airbox Hose for the Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hose. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2002–2007 Subaru WRX and STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eIncreased pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 3.30\" \u0026amp; 3.39\"\u003cbr\u003eInner Diameter 2.90\" \u0026amp; 2.99\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto Silicone 76mm Airbox Hose for the Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hose. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:26:54+08:00","created_at":"2018-01-24T23:26:54+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["2002","2003","2004","2005","2006","2007","impreza-wrx-gda-applied-d-2003-2004-tc-ej207-h4","impreza-wrx-gda-applied-e-2004-2005-tc-ej207-h4","impreza-wrx-gda-applied-f-2005-2006-tc-ej207-h4","impreza-wrx-gda-applied-g-2006-2007-tc-ej207-h4","impreza-wrx-sti-gdb-applied-d-2003-2004-tc-ej207-h4","impreza-wrx-sti-gdb-applied-e-2004-2005-tc-ej207-h4","impreza-wrx-sti-gdb-applied-f-2005-2006-tc-ej207-h4","impreza-wrx-sti-gdb-applied-g-2006-2007-tc-ej207-h4","intake","intake-hoses","mishimoto","subaru","us1","ws136"],"price":11500,"price_min":11500,"price_max":11500,"available":true,"price_varies":false,"compare_at_price":16800,"compare_at_price_min":16800,"compare_at_price_max":16800,"compare_at_price_varies":false,"variants":[{"id":5990402031643,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-WRX-AM7RD","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru Impreza WRX\/STI Silicone 76mm Airbox Hose - Red - GDA GDB APPLIED C to G - MMHOSE-WRX-AM7RD","public_title":null,"options":["Default Title"],"price":11500,"weight":4454,"compare_at_price":16800,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-AM7RD.jpg?v=1710154191"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-AM7RD.jpg?v=1710154191","options":["Title"],"media":[{"alt":"Mishimoto - Subaru Impreza WRX\/STI Silicone 76mm Airbox Hose - Red - GDA GDB APPLIED C to G - MMHOSE-WRX-AM7RD - Rzcrewgarage","id":1351406026849,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-AM7RD.jpg?v=1710154191"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-AM7RD.jpg?v=1710154191","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-WRX-AM7RD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2002–2007 Subaru WRX and STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eIncreased pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 3.30\" \u0026amp; 3.39\"\u003cbr\u003eInner Diameter 2.90\" \u0026amp; 2.99\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto Silicone 76mm Airbox Hose for the Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hose. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2002–2007 Subaru WRX and STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eIncreased pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 3.30\" \u0026amp; 3.39\"\u003cbr\u003eInner Diameter 2.90\" \u0026amp; 2.99\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto Silicone 76mm Airbox Hose for the Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hose. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":562000789531,"title":"Mishimoto - Subaru Impreza WRX\/STI Silicone 80mm Airbox Hose - Black - GDB - MMHOSE-WRX-AM8BK","handle":"mishimoto-subaru-impreza-wrx-sti-silicone-80mm-airbox-hose-black-gdb-mmhose-wrx-am8bk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-WRX-AM8BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2002–2007 Subaru WRX and STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eIncreased pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 3.30\" \u0026amp; 3.54\" \u003cbr\u003eInner Diameter 2.90\" \u0026amp; 3.14\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto Silicone 80mm Airbox Hose for the Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hose. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2002–2007 Subaru WRX and STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eIncreased pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 3.30\" \u0026amp; 3.54\" \u003cbr\u003eInner Diameter 2.90\" \u0026amp; 3.14\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto Silicone 80mm Airbox Hose for the Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hose. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:26:40+08:00","created_at":"2018-01-24T23:26:40+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["2000","2001","2002","2003","2004","2005","2006","2007","impreza-wrx-sti-gdb-applied-a-2000-2001-tc-ej207-h4","impreza-wrx-sti-gdb-applied-b-2001-2002-tc-ej207-h4","impreza-wrx-sti-gdb-applied-c-2002-2003-tc-ej207-h4","impreza-wrx-sti-gdb-applied-d-2003-2004-tc-ej207-h4","impreza-wrx-sti-gdb-applied-e-2004-2005-tc-ej207-h4","impreza-wrx-sti-gdb-applied-f-2005-2006-tc-ej207-h4","impreza-wrx-sti-gdb-applied-g-2006-2007-tc-ej207-h4","intake","intake-hoses","mishimoto","subaru","us1","ws136"],"price":12050,"price_min":12050,"price_max":12050,"available":true,"price_varies":false,"compare_at_price":17600,"compare_at_price_min":17600,"compare_at_price_max":17600,"compare_at_price_varies":false,"variants":[{"id":5990400294939,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-WRX-AM8BK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru Impreza WRX\/STI Silicone 80mm Airbox Hose - Black - GDB - MMHOSE-WRX-AM8BK","public_title":null,"options":["Default Title"],"price":12050,"weight":4454,"compare_at_price":17600,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-AM8BK.jpg?v=1710154177"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-AM8BK.jpg?v=1710154177","options":["Title"],"media":[{"alt":"Mishimoto - Subaru Impreza WRX\/STI Silicone 80mm Airbox Hose - Black - GDB - MMHOSE-WRX-AM8BK - Rzcrewgarage","id":1351405273185,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-AM8BK.jpg?v=1710154177"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-AM8BK.jpg?v=1710154177","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-WRX-AM8BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2002–2007 Subaru WRX and STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eIncreased pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 3.30\" \u0026amp; 3.54\" \u003cbr\u003eInner Diameter 2.90\" \u0026amp; 3.14\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto Silicone 80mm Airbox Hose for the Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hose. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2002–2007 Subaru WRX and STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eIncreased pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 3.30\" \u0026amp; 3.54\" \u003cbr\u003eInner Diameter 2.90\" \u0026amp; 3.14\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto Silicone 80mm Airbox Hose for the Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hose. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":562000822299,"title":"Mishimoto - Subaru Impreza WRX\/STI Silicone 80mm Airbox Hose - Blue - GDB - MMHOSE-WRX-AM8BL","handle":"mishimoto-subaru-impreza-wrx-sti-silicone-80mm-airbox-hose-blue-gdb-mmhose-wrx-am8bl","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-WRX-AM8BL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2002–2007 Subaru WRX and STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eIncreased pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 3.30\" \u0026amp; 3.54\" \u003cbr\u003eInner Diameter 2.90\" \u0026amp; 3.14\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto Silicone 80mm Airbox Hose for the Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hose. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2002–2007 Subaru WRX and STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eIncreased pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 3.30\" \u0026amp; 3.54\" \u003cbr\u003eInner Diameter 2.90\" \u0026amp; 3.14\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto Silicone 80mm Airbox Hose for the Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hose. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:26:41+08:00","created_at":"2018-01-24T23:26:41+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["2000","2001","2002","2003","2004","2005","2006","2007","impreza-wrx-sti-gdb-applied-a-2000-2001-tc-ej207-h4","impreza-wrx-sti-gdb-applied-b-2001-2002-tc-ej207-h4","impreza-wrx-sti-gdb-applied-c-2002-2003-tc-ej207-h4","impreza-wrx-sti-gdb-applied-d-2003-2004-tc-ej207-h4","impreza-wrx-sti-gdb-applied-e-2004-2005-tc-ej207-h4","impreza-wrx-sti-gdb-applied-f-2005-2006-tc-ej207-h4","impreza-wrx-sti-gdb-applied-g-2006-2007-tc-ej207-h4","intake","intake-hoses","mishimoto","subaru","us1","ws136"],"price":12050,"price_min":12050,"price_max":12050,"available":true,"price_varies":false,"compare_at_price":17600,"compare_at_price_min":17600,"compare_at_price_max":17600,"compare_at_price_varies":false,"variants":[{"id":5990400327707,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-WRX-AM8BL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru Impreza WRX\/STI Silicone 80mm Airbox Hose - Blue - GDB - MMHOSE-WRX-AM8BL","public_title":null,"options":["Default Title"],"price":12050,"weight":4499,"compare_at_price":17600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-AM8BL.jpg?v=1710154177"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-AM8BL.jpg?v=1710154177","options":["Title"],"media":[{"alt":"Mishimoto - Subaru Impreza WRX\/STI Silicone 80mm Airbox Hose - Blue - GDB - MMHOSE-WRX-AM8BL - Rzcrewgarage","id":1351405338721,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-AM8BL.jpg?v=1710154177"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-AM8BL.jpg?v=1710154177","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-WRX-AM8BL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2002–2007 Subaru WRX and STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eIncreased pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 3.30\" \u0026amp; 3.54\" \u003cbr\u003eInner Diameter 2.90\" \u0026amp; 3.14\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto Silicone 80mm Airbox Hose for the Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hose. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2002–2007 Subaru WRX and STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eIncreased pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 3.30\" \u0026amp; 3.54\" \u003cbr\u003eInner Diameter 2.90\" \u0026amp; 3.14\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto Silicone 80mm Airbox Hose for the Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hose. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":562000855067,"title":"Mishimoto - Subaru Impreza WRX\/STI Silicone 80mm Airbox Hose - Red - GDB - MMHOSE-WRX-AM8RD","handle":"mishimoto-subaru-impreza-wrx-sti-silicone-80mm-airbox-hose-red-gdb-mmhose-wrx-am8rd","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-WRX-AM8RD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2002–2007 Subaru WRX and STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eIncreased pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 3.30\" \u0026amp; 3.54\" \u003cbr\u003eInner Diameter 2.90\" \u0026amp; 3.14\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto Silicone 80mm Airbox Hose for the Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hose. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2002–2007 Subaru WRX and STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eIncreased pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 3.30\" \u0026amp; 3.54\" \u003cbr\u003eInner Diameter 2.90\" \u0026amp; 3.14\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto Silicone 80mm Airbox Hose for the Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hose. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:26:41+08:00","created_at":"2018-01-24T23:26:42+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["2000","2001","2002","2003","2004","2005","2006","2007","impreza-wrx-sti-gdb-applied-a-2000-2001-tc-ej207-h4","impreza-wrx-sti-gdb-applied-b-2001-2002-tc-ej207-h4","impreza-wrx-sti-gdb-applied-c-2002-2003-tc-ej207-h4","impreza-wrx-sti-gdb-applied-d-2003-2004-tc-ej207-h4","impreza-wrx-sti-gdb-applied-e-2004-2005-tc-ej207-h4","impreza-wrx-sti-gdb-applied-f-2005-2006-tc-ej207-h4","impreza-wrx-sti-gdb-applied-g-2006-2007-tc-ej207-h4","intake","intake-hoses","mishimoto","subaru","us1","ws136"],"price":12050,"price_min":12050,"price_max":12050,"available":true,"price_varies":false,"compare_at_price":17600,"compare_at_price_min":17600,"compare_at_price_max":17600,"compare_at_price_varies":false,"variants":[{"id":5990400360475,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-WRX-AM8RD","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru Impreza WRX\/STI Silicone 80mm Airbox Hose - Red - GDB - MMHOSE-WRX-AM8RD","public_title":null,"options":["Default Title"],"price":12050,"weight":5361,"compare_at_price":17600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-AM8RD.jpg?v=1710154179"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-AM8RD.jpg?v=1710154179","options":["Title"],"media":[{"alt":"Mishimoto - Subaru Impreza WRX\/STI Silicone 80mm Airbox Hose - Red - GDB - MMHOSE-WRX-AM8RD - Rzcrewgarage","id":1351405371489,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-AM8RD.jpg?v=1710154179"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-AM8RD.jpg?v=1710154179","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-WRX-AM8RD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2002–2007 Subaru WRX and STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eIncreased pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 3.30\" \u0026amp; 3.54\" \u003cbr\u003eInner Diameter 2.90\" \u0026amp; 3.14\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto Silicone 80mm Airbox Hose for the Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hose. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2002–2007 Subaru WRX and STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eIncreased pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 3.30\" \u0026amp; 3.54\" \u003cbr\u003eInner Diameter 2.90\" \u0026amp; 3.14\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto Silicone 80mm Airbox Hose for the Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hose. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561999413275,"title":"Mishimoto - Subaru WRX \/ WRX STI Silicone Induction Hose - Black - GDB GRB GVB GRF GVF - MMHOSE-SUB-IHBK","handle":"mishimoto-subaru-wrx-wrx-sti-silicone-induction-hose-black-gdb-grb-gvb-grf-gvf-mmhose-sub-ihbk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-SUB-IHBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for 2001–2007 Subaru WRX and 2004–2015 Subaru WRX STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eReinforced with wire to prevent collapse under pressure\u003cbr\u003eIncreased flow due to larger internal diameter\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) T-Bolt Clamp\u003cbr\u003e(3) Aluminum Push-On Fittings\u003cbr\u003e\u003cbr\u003eChassis Codes GD\u003cbr\u003eEngine Codes EJ255, EJ257\u003cbr\u003eOuter Diameter 2.40\" \u0026amp; 3.10\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.00\" \u0026amp; 2.60\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone turbo inlet hose for the Subaru WRX\/STI is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock hose. The Mishimoto Silicone Induction Hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. Available in black, blue, or red, these silicone turbo inlet hoses retain stock fitment, the ultimate upgrade in performance and style.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for 2001–2007 Subaru WRX and 2004–2015 Subaru WRX STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eReinforced with wire to prevent collapse under pressure\u003cbr\u003eIncreased flow due to larger internal diameter\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) T-Bolt Clamp\u003cbr\u003e(3) Aluminum Push-On Fittings\u003cbr\u003e\u003cbr\u003eChassis Codes GD\u003cbr\u003eEngine Codes EJ255, EJ257\u003cbr\u003eOuter Diameter 2.40\" \u0026amp; 3.10\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.00\" \u0026amp; 2.60\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone turbo inlet hose for the Subaru WRX\/STI is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock hose. The Mishimoto Silicone Induction Hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. Available in black, blue, or red, these silicone turbo inlet hoses retain stock fitment, the ultimate upgrade in performance and style.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:26:32+08:00","created_at":"2018-01-24T23:26:32+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","impreza-wrx-sti-a-line-grf-applied-b-2009-2009-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-c-2007-2012-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-c-2010-2012-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-gdb-applied-e-2004-2005-tc-ej207-h4","impreza-wrx-sti-gdb-applied-f-2005-2006-tc-ej207-h4","impreza-wrx-sti-gdb-applied-g-2006-2007-tc-ej207-h4","impreza-wrx-sti-grb-applied-a-2007-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-b-2009-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-c-2010-2012-tc-ej207-h4","impreza-wrx-sti-grb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-grb-applied-e-2013-2014-tc-ej207-h4","impreza-wrx-sti-gvb-applied-c-2007-2012-tc-ej207-h4","impreza-wrx-sti-gvb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-gvb-applied-e-2013-2014-tc-ej207-h4","intake","intake-hoses","mishimoto","subaru","us1","ws136"],"price":35980,"price_min":35980,"price_max":35980,"available":true,"price_varies":false,"compare_at_price":52500,"compare_at_price_min":52500,"compare_at_price_max":52500,"compare_at_price_varies":false,"variants":[{"id":5990398885915,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-SUB-IHBK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX \/ WRX STI Silicone Induction Hose - Black - GDB GRB GVB GRF GVF - MMHOSE-SUB-IHBK","public_title":null,"options":["Default Title"],"price":35980,"weight":5588,"compare_at_price":52500,"inventory_quantity":18,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-IHBK.jpg?v=1710154167"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-IHBK.jpg?v=1710154167","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX \/ WRX STI Silicone Induction Hose - Black - GDB GRB GVB GRF GVF - MMHOSE-SUB-IHBK - Rzcrewgarage","id":1351404847201,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-IHBK.jpg?v=1710154167"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-IHBK.jpg?v=1710154167","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-SUB-IHBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for 2001–2007 Subaru WRX and 2004–2015 Subaru WRX STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eReinforced with wire to prevent collapse under pressure\u003cbr\u003eIncreased flow due to larger internal diameter\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) T-Bolt Clamp\u003cbr\u003e(3) Aluminum Push-On Fittings\u003cbr\u003e\u003cbr\u003eChassis Codes GD\u003cbr\u003eEngine Codes EJ255, EJ257\u003cbr\u003eOuter Diameter 2.40\" \u0026amp; 3.10\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.00\" \u0026amp; 2.60\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone turbo inlet hose for the Subaru WRX\/STI is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock hose. The Mishimoto Silicone Induction Hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. Available in black, blue, or red, these silicone turbo inlet hoses retain stock fitment, the ultimate upgrade in performance and style.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for 2001–2007 Subaru WRX and 2004–2015 Subaru WRX STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eReinforced with wire to prevent collapse under pressure\u003cbr\u003eIncreased flow due to larger internal diameter\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) T-Bolt Clamp\u003cbr\u003e(3) Aluminum Push-On Fittings\u003cbr\u003e\u003cbr\u003eChassis Codes GD\u003cbr\u003eEngine Codes EJ255, EJ257\u003cbr\u003eOuter Diameter 2.40\" \u0026amp; 3.10\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.00\" \u0026amp; 2.60\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone turbo inlet hose for the Subaru WRX\/STI is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock hose. The Mishimoto Silicone Induction Hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. Available in black, blue, or red, these silicone turbo inlet hoses retain stock fitment, the ultimate upgrade in performance and style.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":562000363547,"title":"Mishimoto - Subaru WRX \/ WRX STI Silicone Induction Hose - Blue - GDB GRB GVB GRF GVF - MMHOSE-SUB-IHBL","handle":"mishimoto-subaru-wrx-wrx-sti-silicone-induction-hose-blue-gdb-grb-gvb-grf-gvf-mmhose-sub-ihbl","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-SUB-IHBL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for 2001–2007 Subaru WRX and 2004–2015 Subaru WRX STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eReinforced with wire to prevent collapse under pressure\u003cbr\u003eIncreased flow due to larger internal diameter\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) T-Bolt Clamp\u003cbr\u003e(3) Aluminum Push-On Fittings\u003cbr\u003e\u003cbr\u003eChassis Codes GD\u003cbr\u003eEngine Codes EJ255, EJ257\u003cbr\u003eOuter Diameter 2.40\" \u0026amp; 3.10\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.00\" \u0026amp; 2.60\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone turbo inlet hose for the Subaru WRX\/STI is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock hose. The Mishimoto Silicone Induction Hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. Available in black, blue, or red, these silicone turbo inlet hoses retain stock fitment, the ultimate upgrade in performance and style.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for 2001–2007 Subaru WRX and 2004–2015 Subaru WRX STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eReinforced with wire to prevent collapse under pressure\u003cbr\u003eIncreased flow due to larger internal diameter\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) T-Bolt Clamp\u003cbr\u003e(3) Aluminum Push-On Fittings\u003cbr\u003e\u003cbr\u003eChassis Codes GD\u003cbr\u003eEngine Codes EJ255, EJ257\u003cbr\u003eOuter Diameter 2.40\" \u0026amp; 3.10\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.00\" \u0026amp; 2.60\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone turbo inlet hose for the Subaru WRX\/STI is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock hose. The Mishimoto Silicone Induction Hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. Available in black, blue, or red, these silicone turbo inlet hoses retain stock fitment, the ultimate upgrade in performance and style.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 4 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:26:32+08:00","created_at":"2018-01-24T23:26:33+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","impreza-wrx-sti-a-line-grf-applied-b-2009-2009-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-c-2007-2012-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-c-2010-2012-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-gdb-applied-e-2004-2005-tc-ej207-h4","impreza-wrx-sti-gdb-applied-f-2005-2006-tc-ej207-h4","impreza-wrx-sti-gdb-applied-g-2006-2007-tc-ej207-h4","impreza-wrx-sti-grb-applied-a-2007-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-b-2009-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-c-2010-2012-tc-ej207-h4","impreza-wrx-sti-grb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-grb-applied-e-2013-2014-tc-ej207-h4","impreza-wrx-sti-gvb-applied-c-2007-2012-tc-ej207-h4","impreza-wrx-sti-gvb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-gvb-applied-e-2013-2014-tc-ej207-h4","intake","intake-hoses","mishimoto","subaru","us1","ws136"],"price":35980,"price_min":35980,"price_max":35980,"available":true,"price_varies":false,"compare_at_price":52500,"compare_at_price_min":52500,"compare_at_price_max":52500,"compare_at_price_varies":false,"variants":[{"id":5990399836187,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-SUB-IHBL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX \/ WRX STI Silicone Induction Hose - Blue - GDB GRB GVB GRF GVF - MMHOSE-SUB-IHBL","public_title":null,"options":["Default Title"],"price":35980,"weight":5542,"compare_at_price":52500,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-IHBL.jpg?v=1710154167"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-IHBL.jpg?v=1710154167","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX \/ WRX STI Silicone Induction Hose - Blue - GDB GRB GVB GRF GVF - MMHOSE-SUB-IHBL - Rzcrewgarage","id":1351404879969,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-IHBL.jpg?v=1710154167"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-IHBL.jpg?v=1710154167","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-SUB-IHBL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for 2001–2007 Subaru WRX and 2004–2015 Subaru WRX STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eReinforced with wire to prevent collapse under pressure\u003cbr\u003eIncreased flow due to larger internal diameter\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) T-Bolt Clamp\u003cbr\u003e(3) Aluminum Push-On Fittings\u003cbr\u003e\u003cbr\u003eChassis Codes GD\u003cbr\u003eEngine Codes EJ255, EJ257\u003cbr\u003eOuter Diameter 2.40\" \u0026amp; 3.10\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.00\" \u0026amp; 2.60\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone turbo inlet hose for the Subaru WRX\/STI is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock hose. The Mishimoto Silicone Induction Hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. Available in black, blue, or red, these silicone turbo inlet hoses retain stock fitment, the ultimate upgrade in performance and style.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for 2001–2007 Subaru WRX and 2004–2015 Subaru WRX STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eReinforced with wire to prevent collapse under pressure\u003cbr\u003eIncreased flow due to larger internal diameter\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) T-Bolt Clamp\u003cbr\u003e(3) Aluminum Push-On Fittings\u003cbr\u003e\u003cbr\u003eChassis Codes GD\u003cbr\u003eEngine Codes EJ255, EJ257\u003cbr\u003eOuter Diameter 2.40\" \u0026amp; 3.10\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.00\" \u0026amp; 2.60\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone turbo inlet hose for the Subaru WRX\/STI is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock hose. The Mishimoto Silicone Induction Hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. Available in black, blue, or red, these silicone turbo inlet hoses retain stock fitment, the ultimate upgrade in performance and style.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 4 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":562000429083,"title":"Mishimoto - Subaru WRX \/ WRX STI Silicone Induction Hose - Red - GDB GRB GVB GRF GVF - MMHOSE-SUB-IHRD","handle":"mishimoto-subaru-wrx-wrx-sti-silicone-induction-hose-red-gdb-grb-gvb-grf-gvf-mmhose-sub-ihrd","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-SUB-IHRD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for 2001–2007 Subaru WRX and 2004–2015 Subaru WRX STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eReinforced with wire to prevent collapse under pressure\u003cbr\u003eIncreased flow due to larger internal diameter\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) T-Bolt Clamp\u003cbr\u003e(3) Aluminum Push-On Fittings\u003cbr\u003e\u003cbr\u003eChassis Codes GD\u003cbr\u003eEngine Codes EJ255, EJ257\u003cbr\u003eOuter Diameter 2.40\" \u0026amp; 3.10\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.00\" \u0026amp; 2.60\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone turbo inlet hose for the Subaru WRX\/STI is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock hose. The Mishimoto Silicone Induction Hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. Available in black, blue, or red, these silicone turbo inlet hoses retain stock fitment, the ultimate upgrade in performance and style.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for 2001–2007 Subaru WRX and 2004–2015 Subaru WRX STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eReinforced with wire to prevent collapse under pressure\u003cbr\u003eIncreased flow due to larger internal diameter\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) T-Bolt Clamp\u003cbr\u003e(3) Aluminum Push-On Fittings\u003cbr\u003e\u003cbr\u003eChassis Codes GD\u003cbr\u003eEngine Codes EJ255, EJ257\u003cbr\u003eOuter Diameter 2.40\" \u0026amp; 3.10\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.00\" \u0026amp; 2.60\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone turbo inlet hose for the Subaru WRX\/STI is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock hose. The Mishimoto Silicone Induction Hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. Available in black, blue, or red, these silicone turbo inlet hoses retain stock fitment, the ultimate upgrade in performance and style.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:26:33+08:00","created_at":"2018-01-24T23:26:33+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","impreza-wrx-sti-a-line-grf-applied-b-2009-2009-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-c-2007-2012-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-c-2010-2012-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-gdb-applied-e-2004-2005-tc-ej207-h4","impreza-wrx-sti-gdb-applied-f-2005-2006-tc-ej207-h4","impreza-wrx-sti-gdb-applied-g-2006-2007-tc-ej207-h4","impreza-wrx-sti-grb-applied-a-2007-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-b-2009-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-c-2010-2012-tc-ej207-h4","impreza-wrx-sti-grb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-grb-applied-e-2013-2014-tc-ej207-h4","impreza-wrx-sti-gvb-applied-c-2007-2012-tc-ej207-h4","impreza-wrx-sti-gvb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-gvb-applied-e-2013-2014-tc-ej207-h4","intake","intake-hoses","mishimoto","subaru","us1","ws136"],"price":35980,"price_min":35980,"price_max":35980,"available":true,"price_varies":false,"compare_at_price":52500,"compare_at_price_min":52500,"compare_at_price_max":52500,"compare_at_price_varies":false,"variants":[{"id":5990399901723,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-SUB-IHRD","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX \/ WRX STI Silicone Induction Hose - Red - GDB GRB GVB GRF GVF - MMHOSE-SUB-IHRD","public_title":null,"options":["Default Title"],"price":35980,"weight":5588,"compare_at_price":52500,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-IHRD.jpg?v=1710154167"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-IHRD.jpg?v=1710154167","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX \/ WRX STI Silicone Induction Hose - Red - GDB GRB GVB GRF GVF - MMHOSE-SUB-IHRD - Rzcrewgarage","id":1351404912737,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-IHRD.jpg?v=1710154167"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-IHRD.jpg?v=1710154167","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-SUB-IHRD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for 2001–2007 Subaru WRX and 2004–2015 Subaru WRX STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eReinforced with wire to prevent collapse under pressure\u003cbr\u003eIncreased flow due to larger internal diameter\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) T-Bolt Clamp\u003cbr\u003e(3) Aluminum Push-On Fittings\u003cbr\u003e\u003cbr\u003eChassis Codes GD\u003cbr\u003eEngine Codes EJ255, EJ257\u003cbr\u003eOuter Diameter 2.40\" \u0026amp; 3.10\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.00\" \u0026amp; 2.60\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone turbo inlet hose for the Subaru WRX\/STI is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock hose. The Mishimoto Silicone Induction Hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. Available in black, blue, or red, these silicone turbo inlet hoses retain stock fitment, the ultimate upgrade in performance and style.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for 2001–2007 Subaru WRX and 2004–2015 Subaru WRX STI\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eReinforced with wire to prevent collapse under pressure\u003cbr\u003eIncreased flow due to larger internal diameter\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) T-Bolt Clamp\u003cbr\u003e(3) Aluminum Push-On Fittings\u003cbr\u003e\u003cbr\u003eChassis Codes GD\u003cbr\u003eEngine Codes EJ255, EJ257\u003cbr\u003eOuter Diameter 2.40\" \u0026amp; 3.10\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.00\" \u0026amp; 2.60\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone turbo inlet hose for the Subaru WRX\/STI is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock hose. The Mishimoto Silicone Induction Hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. Available in black, blue, or red, these silicone turbo inlet hoses retain stock fitment, the ultimate upgrade in performance and style.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561997250587,"title":"Mishimoto - Subaru WRX Silicone Induction Hose - Black - GH GE GR GV BL9 BP9 - MMHOSE-SUB-08IHBK","handle":"mishimoto-subaru-wrx-silicone-induction-hose-black-gh-ge-gr-gv-bl9-bp9-mmhose-sub-08ihbk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-SUB-08IHBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2008–2014 WRX and 2005–2009\u003cbr\u003eFits with stock intake, Mishimoto Subaru WRX\/STI Performance Cold Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake\u003cbr\u003eQuicker turbo spool\u003cbr\u003eIncludes removable CNC-machined aluminum fittings for added durability and easier installation\u003cbr\u003eMolded steel rings for added reinforcement and resistance from collapsing\u003cbr\u003eNo tune required\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) 2.5” T-Bolt Clamp\u003cbr\u003e(2) 13mm–22mm Worm-Gear Clamps\u003cbr\u003e(4) Aluminum Push-On Fittings\u003cbr\u003e(1) Outlet Pipe\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eChassis Codes GE, GH, GR, GV\u003cbr\u003eAlso Fits 2005–2009 Subaru Legacy GT, 2005–2009 Subaru Outback XT\u003cbr\u003eEngine Codes EJ205, EJ255\u003cbr\u003eOuter Diameter 2.63”–3.25” \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.38” (turbo side)–2.75” (intake side)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone induction hose for the 08–14 Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock Subaru turbo inlet hose. \u003cbr\u003e\u003cbr\u003eThe Mishimoto WRX induction hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. The accessory ports of this induction hose come with CNC aluminum fittings with a 3-barb design that will not fall out or leak under load. This turbo inlet hose also comes with everything you’ll need for installation, including a robust 2.5\" T-bolt clamp for the turbo as well as added worm-gear clamps. \u003cbr\u003e\u003cbr\u003eAvailable in black, blue, or red, the silicone WRX induction hose retains stock fitment, the ultimate upgrade in performance and style. This hose will work with your stock airbox hose, Mishimoto Subaru WRX\/STI Performance Cold-Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake. As with all of our products, this hose comes with the Mishimoto Lifetime Warranty!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2008–2014 WRX and 2005–2009\u003cbr\u003eFits with stock intake, Mishimoto Subaru WRX\/STI Performance Cold Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake\u003cbr\u003eQuicker turbo spool\u003cbr\u003eIncludes removable CNC-machined aluminum fittings for added durability and easier installation\u003cbr\u003eMolded steel rings for added reinforcement and resistance from collapsing\u003cbr\u003eNo tune required\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) 2.5” T-Bolt Clamp\u003cbr\u003e(2) 13mm–22mm Worm-Gear Clamps\u003cbr\u003e(4) Aluminum Push-On Fittings\u003cbr\u003e(1) Outlet Pipe\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eChassis Codes GE, GH, GR, GV\u003cbr\u003eAlso Fits 2005–2009 Subaru Legacy GT, 2005–2009 Subaru Outback XT\u003cbr\u003eEngine Codes EJ205, EJ255\u003cbr\u003eOuter Diameter 2.63”–3.25” \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.38” (turbo side)–2.75” (intake side)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone induction hose for the 08–14 Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock Subaru turbo inlet hose. \u003cbr\u003e\u003cbr\u003eThe Mishimoto WRX induction hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. The accessory ports of this induction hose come with CNC aluminum fittings with a 3-barb design that will not fall out or leak under load. This turbo inlet hose also comes with everything you’ll need for installation, including a robust 2.5\" T-bolt clamp for the turbo as well as added worm-gear clamps. \u003cbr\u003e\u003cbr\u003eAvailable in black, blue, or red, the silicone WRX induction hose retains stock fitment, the ultimate upgrade in performance and style. This hose will work with your stock airbox hose, Mishimoto Subaru WRX\/STI Performance Cold-Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake. As with all of our products, this hose comes with the Mishimoto Lifetime Warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:26:08+08:00","created_at":"2018-01-24T23:26:09+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","impreza-wrx-hatch-gh6-applied-e-2008-2014-tc-ej255-h4","impreza-wrx-sedan-ge6-applied-e-2008-2014-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-b-2009-2009-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-c-2007-2012-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-c-2010-2012-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-grb-applied-a-2007-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-b-2009-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-c-2010-2012-tc-ej207-h4","impreza-wrx-sti-grb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-grb-applied-e-2013-2014-tc-ej207-h4","impreza-wrx-sti-gvb-applied-c-2007-2012-tc-ej207-h4","impreza-wrx-sti-gvb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-gvb-applied-e-2013-2014-tc-ej207-h4","intake","intake-hoses","legacy-b4-bl9-applied-c-2005-2006-na-ej25-h4","legacy-b4-bl9-applied-d-2006-2007-na-ej25-h4","legacy-b4-bl9-applied-e-2007-2008-na-ej25-h4","legacy-b4-bl9-applied-f-2008-2009-na-ej25-h4","legacy-outback-bp9-applied-c-2005-2006-na-ej25-h4","legacy-outback-bp9-applied-d-2006-2007-na-ej25-h4","legacy-outback-bp9-applied-e-2007-2008-na-ej25-h4","legacy-outback-bp9-applied-f-2008-2009-na-ej25-h4","mishimoto","subaru","us1","ws136"],"price":38330,"price_min":38330,"price_max":38330,"available":true,"price_varies":false,"compare_at_price":56000,"compare_at_price_min":56000,"compare_at_price_max":56000,"compare_at_price_varies":false,"variants":[{"id":5990396461083,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-SUB-08IHBK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX Silicone Induction Hose - Black - GH GE GR GV BL9 BP9 - MMHOSE-SUB-08IHBK","public_title":null,"options":["Default Title"],"price":38330,"weight":5633,"compare_at_price":56000,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-08IHBK.jpg?v=1710154145"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-08IHBK.jpg?v=1710154145","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX Silicone Induction Hose - Black - GH GE GR GV BL9 BP9 - MMHOSE-SUB-08IHBK - Rzcrewgarage","id":1351403667553,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-08IHBK.jpg?v=1710154145"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-08IHBK.jpg?v=1710154145","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-SUB-08IHBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2008–2014 WRX and 2005–2009\u003cbr\u003eFits with stock intake, Mishimoto Subaru WRX\/STI Performance Cold Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake\u003cbr\u003eQuicker turbo spool\u003cbr\u003eIncludes removable CNC-machined aluminum fittings for added durability and easier installation\u003cbr\u003eMolded steel rings for added reinforcement and resistance from collapsing\u003cbr\u003eNo tune required\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) 2.5” T-Bolt Clamp\u003cbr\u003e(2) 13mm–22mm Worm-Gear Clamps\u003cbr\u003e(4) Aluminum Push-On Fittings\u003cbr\u003e(1) Outlet Pipe\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eChassis Codes GE, GH, GR, GV\u003cbr\u003eAlso Fits 2005–2009 Subaru Legacy GT, 2005–2009 Subaru Outback XT\u003cbr\u003eEngine Codes EJ205, EJ255\u003cbr\u003eOuter Diameter 2.63”–3.25” \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.38” (turbo side)–2.75” (intake side)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone induction hose for the 08–14 Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock Subaru turbo inlet hose. \u003cbr\u003e\u003cbr\u003eThe Mishimoto WRX induction hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. The accessory ports of this induction hose come with CNC aluminum fittings with a 3-barb design that will not fall out or leak under load. This turbo inlet hose also comes with everything you’ll need for installation, including a robust 2.5\" T-bolt clamp for the turbo as well as added worm-gear clamps. \u003cbr\u003e\u003cbr\u003eAvailable in black, blue, or red, the silicone WRX induction hose retains stock fitment, the ultimate upgrade in performance and style. This hose will work with your stock airbox hose, Mishimoto Subaru WRX\/STI Performance Cold-Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake. As with all of our products, this hose comes with the Mishimoto Lifetime Warranty!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2008–2014 WRX and 2005–2009\u003cbr\u003eFits with stock intake, Mishimoto Subaru WRX\/STI Performance Cold Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake\u003cbr\u003eQuicker turbo spool\u003cbr\u003eIncludes removable CNC-machined aluminum fittings for added durability and easier installation\u003cbr\u003eMolded steel rings for added reinforcement and resistance from collapsing\u003cbr\u003eNo tune required\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) 2.5” T-Bolt Clamp\u003cbr\u003e(2) 13mm–22mm Worm-Gear Clamps\u003cbr\u003e(4) Aluminum Push-On Fittings\u003cbr\u003e(1) Outlet Pipe\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eChassis Codes GE, GH, GR, GV\u003cbr\u003eAlso Fits 2005–2009 Subaru Legacy GT, 2005–2009 Subaru Outback XT\u003cbr\u003eEngine Codes EJ205, EJ255\u003cbr\u003eOuter Diameter 2.63”–3.25” \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.38” (turbo side)–2.75” (intake side)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone induction hose for the 08–14 Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock Subaru turbo inlet hose. \u003cbr\u003e\u003cbr\u003eThe Mishimoto WRX induction hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. The accessory ports of this induction hose come with CNC aluminum fittings with a 3-barb design that will not fall out or leak under load. This turbo inlet hose also comes with everything you’ll need for installation, including a robust 2.5\" T-bolt clamp for the turbo as well as added worm-gear clamps. \u003cbr\u003e\u003cbr\u003eAvailable in black, blue, or red, the silicone WRX induction hose retains stock fitment, the ultimate upgrade in performance and style. This hose will work with your stock airbox hose, Mishimoto Subaru WRX\/STI Performance Cold-Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake. As with all of our products, this hose comes with the Mishimoto Lifetime Warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561997283355,"title":"Mishimoto - Subaru WRX Silicone Induction Hose - Blue - GH GE GR GV BL9 BP9 - MMHOSE-SUB-08IHBL","handle":"mishimoto-subaru-wrx-silicone-induction-hose-blue-gh-ge-gr-gv-bl9-bp9-mmhose-sub-08ihbl","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-SUB-08IHBL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2008–2014 WRX and 2005–2009\u003cbr\u003eFits with stock intake, Mishimoto Subaru WRX\/STI Performance Cold Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake\u003cbr\u003eQuicker turbo spool\u003cbr\u003eIncludes removable CNC-machined aluminum fittings for added durability and easier installation\u003cbr\u003eMolded steel rings for added reinforcement and resistance from collapsing\u003cbr\u003eNo tune required\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) 2.5” T-Bolt Clamp\u003cbr\u003e(2) 13mm–22mm Worm-Gear Clamps\u003cbr\u003e(4) Aluminum Push-On Fittings\u003cbr\u003e(1) Outlet Pipe\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eChassis Codes GE, GH, GR, GV\u003cbr\u003eAlso Fits 2005–2009 Subaru Legacy GT, 2005–2009 Subaru Outback XT\u003cbr\u003eEngine Codes EJ205, EJ255\u003cbr\u003eOuter Diameter 2.63”–3.25” \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.38” (turbo side)–2.75” (intake side)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone induction hose for the 08–14 Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock Subaru turbo inlet hose. \u003cbr\u003e\u003cbr\u003eThe Mishimoto WRX induction hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. The accessory ports of this induction hose come with CNC aluminum fittings with a 3-barb design that will not fall out or leak under load. This turbo inlet hose also comes with everything you’ll need for installation, including a robust 2.5\" T-bolt clamp for the turbo as well as added worm-gear clamps. \u003cbr\u003e\u003cbr\u003eAvailable in black, blue, or red, the silicone WRX induction hose retains stock fitment, the ultimate upgrade in performance and style. This hose will work with your stock airbox hose, Mishimoto Subaru WRX\/STI Performance Cold-Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake. As with all of our products, this hose comes with the Mishimoto Lifetime Warranty!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2008–2014 WRX and 2005–2009\u003cbr\u003eFits with stock intake, Mishimoto Subaru WRX\/STI Performance Cold Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake\u003cbr\u003eQuicker turbo spool\u003cbr\u003eIncludes removable CNC-machined aluminum fittings for added durability and easier installation\u003cbr\u003eMolded steel rings for added reinforcement and resistance from collapsing\u003cbr\u003eNo tune required\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) 2.5” T-Bolt Clamp\u003cbr\u003e(2) 13mm–22mm Worm-Gear Clamps\u003cbr\u003e(4) Aluminum Push-On Fittings\u003cbr\u003e(1) Outlet Pipe\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eChassis Codes GE, GH, GR, GV\u003cbr\u003eAlso Fits 2005–2009 Subaru Legacy GT, 2005–2009 Subaru Outback XT\u003cbr\u003eEngine Codes EJ205, EJ255\u003cbr\u003eOuter Diameter 2.63”–3.25” \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.38” (turbo side)–2.75” (intake side)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone induction hose for the 08–14 Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock Subaru turbo inlet hose. \u003cbr\u003e\u003cbr\u003eThe Mishimoto WRX induction hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. The accessory ports of this induction hose come with CNC aluminum fittings with a 3-barb design that will not fall out or leak under load. This turbo inlet hose also comes with everything you’ll need for installation, including a robust 2.5\" T-bolt clamp for the turbo as well as added worm-gear clamps. \u003cbr\u003e\u003cbr\u003eAvailable in black, blue, or red, the silicone WRX induction hose retains stock fitment, the ultimate upgrade in performance and style. This hose will work with your stock airbox hose, Mishimoto Subaru WRX\/STI Performance Cold-Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake. As with all of our products, this hose comes with the Mishimoto Lifetime Warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 4 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:26:09+08:00","created_at":"2018-01-24T23:26:09+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","impreza-wrx-hatch-gh6-applied-e-2008-2014-tc-ej255-h4","impreza-wrx-sedan-ge6-applied-e-2008-2014-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-b-2009-2009-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-c-2007-2012-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-c-2010-2012-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-grb-applied-a-2007-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-b-2009-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-c-2010-2012-tc-ej207-h4","impreza-wrx-sti-grb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-grb-applied-e-2013-2014-tc-ej207-h4","impreza-wrx-sti-gvb-applied-c-2007-2012-tc-ej207-h4","impreza-wrx-sti-gvb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-gvb-applied-e-2013-2014-tc-ej207-h4","intake","intake-hoses","legacy-b4-bl9-applied-c-2005-2006-na-ej25-h4","legacy-b4-bl9-applied-d-2006-2007-na-ej25-h4","legacy-b4-bl9-applied-e-2007-2008-na-ej25-h4","legacy-b4-bl9-applied-f-2008-2009-na-ej25-h4","legacy-outback-bp9-applied-c-2005-2006-na-ej25-h4","legacy-outback-bp9-applied-d-2006-2007-na-ej25-h4","legacy-outback-bp9-applied-e-2007-2008-na-ej25-h4","legacy-outback-bp9-applied-f-2008-2009-na-ej25-h4","mishimoto","subaru","us1","ws136"],"price":38330,"price_min":38330,"price_max":38330,"available":true,"price_varies":false,"compare_at_price":56000,"compare_at_price_min":56000,"compare_at_price_max":56000,"compare_at_price_varies":false,"variants":[{"id":5990396493851,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-SUB-08IHBL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX Silicone Induction Hose - Blue - GH GE GR GV BL9 BP9 - MMHOSE-SUB-08IHBL","public_title":null,"options":["Default Title"],"price":38330,"weight":5542,"compare_at_price":56000,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-08IHBL.jpg?v=1710154147"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-08IHBL.jpg?v=1710154147","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX Silicone Induction Hose - Blue - GH GE GR GV BL9 BP9 - MMHOSE-SUB-08IHBL - Rzcrewgarage","id":1351403700321,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-08IHBL.jpg?v=1710154147"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-08IHBL.jpg?v=1710154147","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-SUB-08IHBL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2008–2014 WRX and 2005–2009\u003cbr\u003eFits with stock intake, Mishimoto Subaru WRX\/STI Performance Cold Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake\u003cbr\u003eQuicker turbo spool\u003cbr\u003eIncludes removable CNC-machined aluminum fittings for added durability and easier installation\u003cbr\u003eMolded steel rings for added reinforcement and resistance from collapsing\u003cbr\u003eNo tune required\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) 2.5” T-Bolt Clamp\u003cbr\u003e(2) 13mm–22mm Worm-Gear Clamps\u003cbr\u003e(4) Aluminum Push-On Fittings\u003cbr\u003e(1) Outlet Pipe\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eChassis Codes GE, GH, GR, GV\u003cbr\u003eAlso Fits 2005–2009 Subaru Legacy GT, 2005–2009 Subaru Outback XT\u003cbr\u003eEngine Codes EJ205, EJ255\u003cbr\u003eOuter Diameter 2.63”–3.25” \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.38” (turbo side)–2.75” (intake side)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone induction hose for the 08–14 Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock Subaru turbo inlet hose. \u003cbr\u003e\u003cbr\u003eThe Mishimoto WRX induction hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. The accessory ports of this induction hose come with CNC aluminum fittings with a 3-barb design that will not fall out or leak under load. This turbo inlet hose also comes with everything you’ll need for installation, including a robust 2.5\" T-bolt clamp for the turbo as well as added worm-gear clamps. \u003cbr\u003e\u003cbr\u003eAvailable in black, blue, or red, the silicone WRX induction hose retains stock fitment, the ultimate upgrade in performance and style. This hose will work with your stock airbox hose, Mishimoto Subaru WRX\/STI Performance Cold-Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake. As with all of our products, this hose comes with the Mishimoto Lifetime Warranty!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2008–2014 WRX and 2005–2009\u003cbr\u003eFits with stock intake, Mishimoto Subaru WRX\/STI Performance Cold Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake\u003cbr\u003eQuicker turbo spool\u003cbr\u003eIncludes removable CNC-machined aluminum fittings for added durability and easier installation\u003cbr\u003eMolded steel rings for added reinforcement and resistance from collapsing\u003cbr\u003eNo tune required\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) 2.5” T-Bolt Clamp\u003cbr\u003e(2) 13mm–22mm Worm-Gear Clamps\u003cbr\u003e(4) Aluminum Push-On Fittings\u003cbr\u003e(1) Outlet Pipe\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eChassis Codes GE, GH, GR, GV\u003cbr\u003eAlso Fits 2005–2009 Subaru Legacy GT, 2005–2009 Subaru Outback XT\u003cbr\u003eEngine Codes EJ205, EJ255\u003cbr\u003eOuter Diameter 2.63”–3.25” \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.38” (turbo side)–2.75” (intake side)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone induction hose for the 08–14 Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock Subaru turbo inlet hose. \u003cbr\u003e\u003cbr\u003eThe Mishimoto WRX induction hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. The accessory ports of this induction hose come with CNC aluminum fittings with a 3-barb design that will not fall out or leak under load. This turbo inlet hose also comes with everything you’ll need for installation, including a robust 2.5\" T-bolt clamp for the turbo as well as added worm-gear clamps. \u003cbr\u003e\u003cbr\u003eAvailable in black, blue, or red, the silicone WRX induction hose retains stock fitment, the ultimate upgrade in performance and style. This hose will work with your stock airbox hose, Mishimoto Subaru WRX\/STI Performance Cold-Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake. As with all of our products, this hose comes with the Mishimoto Lifetime Warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 4 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561997316123,"title":"Mishimoto - Subaru WRX Silicone Induction Hose - Red - GH GE GR GV BL9 BP9 - MMHOSE-SUB-08IHRD","handle":"mishimoto-subaru-wrx-silicone-induction-hose-red-gh-ge-gr-gv-bl9-bp9-mmhose-sub-08ihrd","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-SUB-08IHRD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2008–2014 WRX and 2005–2009\u003cbr\u003eFits with stock intake, Mishimoto Subaru WRX\/STI Performance Cold Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake\u003cbr\u003eQuicker turbo spool\u003cbr\u003eIncludes removable CNC-machined aluminum fittings for added durability and easier installation\u003cbr\u003eMolded steel rings for added reinforcement and resistance from collapsing\u003cbr\u003eNo tune required\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) 2.5” T-Bolt Clamp\u003cbr\u003e(2) 13mm–22mm Worm-Gear Clamps\u003cbr\u003e(4) Aluminum Push-On Fittings\u003cbr\u003e(1) Outlet Pipe\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eChassis Codes GE, GH, GR, GV\u003cbr\u003eAlso Fits 2005–2009 Subaru Legacy GT, 2005–2009 Subaru Outback XT\u003cbr\u003eEngine Codes EJ205, EJ255\u003cbr\u003eOuter Diameter 2.63”–3.25” \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.38” (turbo side)–2.75” (intake side)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone induction hose for the 08–14 Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock Subaru turbo inlet hose. \u003cbr\u003e\u003cbr\u003eThe Mishimoto WRX induction hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. The accessory ports of this induction hose come with CNC aluminum fittings with a 3-barb design that will not fall out or leak under load. This turbo inlet hose also comes with everything you’ll need for installation, including a robust 2.5\" T-bolt clamp for the turbo as well as added worm-gear clamps. \u003cbr\u003e\u003cbr\u003eAvailable in black, blue, or red, the silicone WRX induction hose retains stock fitment, the ultimate upgrade in performance and style. This hose will work with your stock airbox hose, Mishimoto Subaru WRX\/STI Performance Cold-Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake. As with all of our products, this hose comes with the Mishimoto Lifetime Warranty!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2008–2014 WRX and 2005–2009\u003cbr\u003eFits with stock intake, Mishimoto Subaru WRX\/STI Performance Cold Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake\u003cbr\u003eQuicker turbo spool\u003cbr\u003eIncludes removable CNC-machined aluminum fittings for added durability and easier installation\u003cbr\u003eMolded steel rings for added reinforcement and resistance from collapsing\u003cbr\u003eNo tune required\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) 2.5” T-Bolt Clamp\u003cbr\u003e(2) 13mm–22mm Worm-Gear Clamps\u003cbr\u003e(4) Aluminum Push-On Fittings\u003cbr\u003e(1) Outlet Pipe\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eChassis Codes GE, GH, GR, GV\u003cbr\u003eAlso Fits 2005–2009 Subaru Legacy GT, 2005–2009 Subaru Outback XT\u003cbr\u003eEngine Codes EJ205, EJ255\u003cbr\u003eOuter Diameter 2.63”–3.25” \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.38” (turbo side)–2.75” (intake side)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone induction hose for the 08–14 Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock Subaru turbo inlet hose. \u003cbr\u003e\u003cbr\u003eThe Mishimoto WRX induction hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. The accessory ports of this induction hose come with CNC aluminum fittings with a 3-barb design that will not fall out or leak under load. This turbo inlet hose also comes with everything you’ll need for installation, including a robust 2.5\" T-bolt clamp for the turbo as well as added worm-gear clamps. \u003cbr\u003e\u003cbr\u003eAvailable in black, blue, or red, the silicone WRX induction hose retains stock fitment, the ultimate upgrade in performance and style. This hose will work with your stock airbox hose, Mishimoto Subaru WRX\/STI Performance Cold-Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake. As with all of our products, this hose comes with the Mishimoto Lifetime Warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 5 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:26:10+08:00","created_at":"2018-01-24T23:26:10+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","impreza-wrx-hatch-gh6-applied-e-2008-2014-tc-ej255-h4","impreza-wrx-sedan-ge6-applied-e-2008-2014-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-b-2009-2009-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-c-2007-2012-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-c-2010-2012-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-grb-applied-a-2007-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-b-2009-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-c-2010-2012-tc-ej207-h4","impreza-wrx-sti-grb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-grb-applied-e-2013-2014-tc-ej207-h4","impreza-wrx-sti-gvb-applied-c-2007-2012-tc-ej207-h4","impreza-wrx-sti-gvb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-gvb-applied-e-2013-2014-tc-ej207-h4","intake","intake-hoses","legacy-b4-bl9-applied-c-2005-2006-na-ej25-h4","legacy-b4-bl9-applied-d-2006-2007-na-ej25-h4","legacy-b4-bl9-applied-e-2007-2008-na-ej25-h4","legacy-b4-bl9-applied-f-2008-2009-na-ej25-h4","legacy-outback-bp9-applied-c-2005-2006-na-ej25-h4","legacy-outback-bp9-applied-d-2006-2007-na-ej25-h4","legacy-outback-bp9-applied-e-2007-2008-na-ej25-h4","legacy-outback-bp9-applied-f-2008-2009-na-ej25-h4","mishimoto","subaru","us1","ws136"],"price":38330,"price_min":38330,"price_max":38330,"available":true,"price_varies":false,"compare_at_price":56000,"compare_at_price_min":56000,"compare_at_price_max":56000,"compare_at_price_varies":false,"variants":[{"id":5990396526619,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-SUB-08IHRD","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX Silicone Induction Hose - Red - GH GE GR GV BL9 BP9 - MMHOSE-SUB-08IHRD","public_title":null,"options":["Default Title"],"price":38330,"weight":5678,"compare_at_price":56000,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-08IHRD.jpg?v=1710154147"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-08IHRD.jpg?v=1710154147","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX Silicone Induction Hose - Red - GH GE GR GV BL9 BP9 - MMHOSE-SUB-08IHRD - Rzcrewgarage","id":1351403733089,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-08IHRD.jpg?v=1710154147"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-SUB-08IHRD.jpg?v=1710154147","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-SUB-08IHRD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2008–2014 WRX and 2005–2009\u003cbr\u003eFits with stock intake, Mishimoto Subaru WRX\/STI Performance Cold Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake\u003cbr\u003eQuicker turbo spool\u003cbr\u003eIncludes removable CNC-machined aluminum fittings for added durability and easier installation\u003cbr\u003eMolded steel rings for added reinforcement and resistance from collapsing\u003cbr\u003eNo tune required\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) 2.5” T-Bolt Clamp\u003cbr\u003e(2) 13mm–22mm Worm-Gear Clamps\u003cbr\u003e(4) Aluminum Push-On Fittings\u003cbr\u003e(1) Outlet Pipe\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eChassis Codes GE, GH, GR, GV\u003cbr\u003eAlso Fits 2005–2009 Subaru Legacy GT, 2005–2009 Subaru Outback XT\u003cbr\u003eEngine Codes EJ205, EJ255\u003cbr\u003eOuter Diameter 2.63”–3.25” \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.38” (turbo side)–2.75” (intake side)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone induction hose for the 08–14 Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock Subaru turbo inlet hose. \u003cbr\u003e\u003cbr\u003eThe Mishimoto WRX induction hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. The accessory ports of this induction hose come with CNC aluminum fittings with a 3-barb design that will not fall out or leak under load. This turbo inlet hose also comes with everything you’ll need for installation, including a robust 2.5\" T-bolt clamp for the turbo as well as added worm-gear clamps. \u003cbr\u003e\u003cbr\u003eAvailable in black, blue, or red, the silicone WRX induction hose retains stock fitment, the ultimate upgrade in performance and style. This hose will work with your stock airbox hose, Mishimoto Subaru WRX\/STI Performance Cold-Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake. As with all of our products, this hose comes with the Mishimoto Lifetime Warranty!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2008–2014 WRX and 2005–2009\u003cbr\u003eFits with stock intake, Mishimoto Subaru WRX\/STI Performance Cold Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake\u003cbr\u003eQuicker turbo spool\u003cbr\u003eIncludes removable CNC-machined aluminum fittings for added durability and easier installation\u003cbr\u003eMolded steel rings for added reinforcement and resistance from collapsing\u003cbr\u003eNo tune required\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(1) 2.5” T-Bolt Clamp\u003cbr\u003e(2) 13mm–22mm Worm-Gear Clamps\u003cbr\u003e(4) Aluminum Push-On Fittings\u003cbr\u003e(1) Outlet Pipe\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eChassis Codes GE, GH, GR, GV\u003cbr\u003eAlso Fits 2005–2009 Subaru Legacy GT, 2005–2009 Subaru Outback XT\u003cbr\u003eEngine Codes EJ205, EJ255\u003cbr\u003eOuter Diameter 2.63”–3.25” \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter 2.38” (turbo side)–2.75” (intake side)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto's silicone induction hose for the 08–14 Subaru WRX is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your stock Subaru turbo inlet hose. \u003cbr\u003e\u003cbr\u003eThe Mishimoto WRX induction hose is wire reinforced to prevent collapsing under pressure and features increased flow thanks to a larger internal diameter. The accessory ports of this induction hose come with CNC aluminum fittings with a 3-barb design that will not fall out or leak under load. This turbo inlet hose also comes with everything you’ll need for installation, including a robust 2.5\" T-bolt clamp for the turbo as well as added worm-gear clamps. \u003cbr\u003e\u003cbr\u003eAvailable in black, blue, or red, the silicone WRX induction hose retains stock fitment, the ultimate upgrade in performance and style. This hose will work with your stock airbox hose, Mishimoto Subaru WRX\/STI Performance Cold-Air Intake, or Mishimoto Subaru WRX\/STI Performance Race Intake. As with all of our products, this hose comes with the Mishimoto Lifetime Warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 5 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561986207771,"title":"Mishimoto - Subaru WRX STI Oil Cooler Kit - GRB GVB GRF GVF - MMOC-STI-08","handle":"mishimoto-subaru-wrx-sti-oil-cooler-kit-grb-gvb-grf-gvf-mmoc-sti-08","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-STI-08\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 5 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:07+08:00","created_at":"2018-01-24T23:24:07+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2007","2008","2009","2010","2011","2012","2013","2014","car-specific","cooling","impreza-wrx-sti-a-line-grf-applied-b-2009-2009-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-c-2007-2012-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-c-2010-2012-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-grb-applied-a-2007-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-b-2009-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-c-2010-2012-tc-ej207-h4","impreza-wrx-sti-grb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-grb-applied-e-2013-2014-tc-ej207-h4","impreza-wrx-sti-gvb-applied-c-2007-2012-tc-ej207-h4","impreza-wrx-sti-gvb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-gvb-applied-e-2013-2014-tc-ej207-h4","mishimoto","oil-cooler-kits","oil-coolers","subaru","us1","ws112"],"price":82000,"price_min":82000,"price_max":82000,"available":true,"price_varies":false,"compare_at_price":83200,"compare_at_price_min":83200,"compare_at_price_max":83200,"compare_at_price_varies":false,"variants":[{"id":5990382862363,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-STI-08","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX STI Oil Cooler Kit - GRB GVB GRF GVF - MMOC-STI-08","public_title":null,"options":["Default Title"],"price":82000,"weight":8990,"compare_at_price":83200,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08.jpg?v=1710154075"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08.jpg?v=1710154075","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX STI Oil Cooler Kit - GRB GVB GRF GVF - MMOC-STI-08 - Rzcrewgarage","id":1351399440481,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08.jpg?v=1710154075"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08.jpg?v=1710154075","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-STI-08\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 5 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}