WRX S4 | VAG APPLIED A | 2014-2015 | TC | FA20F | H4

{"id":6570243686582,"title":"HKS Super SQV IV Sequential Blow Off Valve Kit Black Edition - Subaru WRX S4 VAG Applied A-D (2014-2021)","handle":"hks-super-sqv-iv-sequential-blow-off-valve-kit-black-edition-subaru-wrx-s4-vag-applied-a-d-2014-2021-71008-af015b","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 71008-AF015B\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e-Suction Return \u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThis is the Black Edition head unit available as a Full Kit released with Limited Stock. The Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - WRX S4 - VAG Applied A (2014-2015) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied B (2015-2016) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied C (2016-2017) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied D (2017-2021) FA20\u003c!--split--\u003e","published_at":"2021-03-11T16:47:43+08:00","created_at":"2021-03-11T16:47:44+08:00","vendor":"HKS","type":"Universal Blow Off Valves","tags":["2014","2015","2016","2017","2018","2019","2020","2021","forced-induction","hks","jp1","subaru","universal-blow-off-valves","wrx-s4-vag-applied-a-2014-2015-tc-fa20f-h4","wrx-s4-vag-applied-b-2015-2016-tc-fa20f-h4","wrx-s4-vag-applied-c-2016-2018-tc-fa20f-h4","wrx-s4-vag-applied-d-2017-2021-tc-fa20f-h4","ws123"],"price":27720,"price_min":27720,"price_max":27720,"available":true,"price_varies":false,"compare_at_price":36000,"compare_at_price_min":36000,"compare_at_price_max":36000,"compare_at_price_varies":false,"variants":[{"id":39339575771318,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"71008-AF015B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Super SQV IV Sequential Blow Off Valve Kit Black Edition - Subaru WRX S4 VAG Applied A-D (2014-2021)","public_title":null,"options":["Default Title"],"price":27720,"weight":3000,"compare_at_price":36000,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-black-edition-subaru-wrx-s4-vag-applied-a-d-2014-2021-rzcrew.png?v=1710326296"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-black-edition-subaru-wrx-s4-vag-applied-a-d-2014-2021-rzcrew.png?v=1710326296","options":["Title"],"media":[{"alt":"HKS Super SQV IV Sequential Blow Off Valve Kit Black Edition - Subaru WRX S4 VAG Applied A-D (2014-2021) - 71008-AF015B - Rzcrewgarage","id":22888504328374,"position":1,"preview_image":{"aspect_ratio":1.426,"height":1088,"width":1552,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-black-edition-subaru-wrx-s4-vag-applied-a-d-2014-2021-rzcrew.png?v=1710326296"},"aspect_ratio":1.426,"height":1088,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-black-edition-subaru-wrx-s4-vag-applied-a-d-2014-2021-rzcrew.png?v=1710326296","width":1552}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 71008-AF015B\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e-Suction Return \u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThis is the Black Edition head unit available as a Full Kit released with Limited Stock. The Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - WRX S4 - VAG Applied A (2014-2015) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied B (2015-2016) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied C (2016-2017) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied D (2017-2021) FA20\u003c!--split--\u003e"}

{"id":6794770317494,"title":"HKS Super Turbo Muffler Ti Exhaust System - Subaru - WRX S4 VAG APPLIED A to C","handle":"hks-super-turbo-muffler-ti-exhaust-system-subaru-wrx-s4-vag-applied-a-to-c-31029-af013v","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 31029-AF013V\u003cbr\u003eType: Exhaust System\u003cbr\u003eMaterial: Titanium\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eQuiet comfortable cruising with raspy sporty sound during acceleration.\u003cb\u003eEasy to spot four big burnt titanium exhaust tail tips with HKS logo on the side.\u003cbr\u003eUltra light product, up to 48% percent compared to stainless steel version of this exhaust\u003cbr\u003e\u003cbr\u003eTail Pipe OD: 90mm x 2\u003cbr\u003ePipe Diameter: 74.7?60.5 x 2?54 x 4\u003cbr\u003e\u003cbr\u003eSpecial Notes: S207 complies with Japanese regulations.\u003cbr\u003eTail with HKS logo.\u003cbr\u003eCompatible with STI rear side under spoiler \u0026amp; STI rear under spoiler.\u003cbr\u003eCompatible with 3BA-VAG made after Aug 2020.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\n\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eWRX S4 | VAG APPLIED A | 2014-2015 | TC | FA20F | H4,WRX S4 | VAG APPLIED B | 2015-2016 | TC | FA20F | H4,WRX S4 | VAG APPLIED C | 2016-2018 | TC | FA20F | H4\u003c!--split--\u003e\u003c\/b\u003e","published_at":"2021-06-17T14:03:50+08:00","created_at":"2021-06-17T14:03:51+08:00","vendor":"HKS","type":"Catbacks - Exhaust Manifolds","tags":["2014","2015","2016","2017","2018","catbacks-exhaust-manifolds","exhaust","exhaust-system","hks","jp1","subaru","titanium","VAG APPLIED A to C","wrx-s4-vag-applied-a-2014-2015-tc-fa20f-h4","wrx-s4-vag-applied-b-2015-2016-tc-fa20f-h4","wrx-s4-vag-applied-c-2016-2018-tc-fa20f-h4","ws117"],"price":526552,"price_min":526552,"price_max":526552,"available":true,"price_varies":false,"compare_at_price":634400,"compare_at_price_min":634400,"compare_at_price_max":634400,"compare_at_price_varies":false,"variants":[{"id":39952889282742,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"31029-AF013V","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Super Turbo Muffler Ti Exhaust System - Subaru - WRX S4 VAG APPLIED A to C","public_title":null,"options":["Default Title"],"price":526552,"weight":86592,"compare_at_price":634400,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-turbo-muffler-ti-exhaust-system-subaru-wrx-s4-vag-applied-a-to-c-rzcrew-1.jpg?v=1710324694","\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-turbo-muffler-ti-exhaust-system-subaru-wrx-s4-vag-applied-a-to-c-rzcrew-2.jpg?v=1710324695","\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-turbo-muffler-ti-exhaust-system-subaru-wrx-s4-vag-applied-a-to-c-rzcrew-3.gif?v=1710324697"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-turbo-muffler-ti-exhaust-system-subaru-wrx-s4-vag-applied-a-to-c-rzcrew-1.jpg?v=1710324694","options":["Title"],"media":[{"alt":"HKS Super Turbo Muffler Ti Exhaust System - Subaru - WRX S4 VAG APPLIED A to C - 31029-AF013V","id":25418305241270,"position":1,"preview_image":{"aspect_ratio":1.4,"height":400,"width":560,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-turbo-muffler-ti-exhaust-system-subaru-wrx-s4-vag-applied-a-to-c-rzcrew-1.jpg?v=1710324694"},"aspect_ratio":1.4,"height":400,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-turbo-muffler-ti-exhaust-system-subaru-wrx-s4-vag-applied-a-to-c-rzcrew-1.jpg?v=1710324694","width":560},{"alt":"HKS Super Turbo Muffler Ti Exhaust System - Subaru - WRX S4 VAG APPLIED A to C - 31029-AF013V","id":25418305274038,"position":2,"preview_image":{"aspect_ratio":1.21,"height":463,"width":560,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-turbo-muffler-ti-exhaust-system-subaru-wrx-s4-vag-applied-a-to-c-rzcrew-2.jpg?v=1710324695"},"aspect_ratio":1.21,"height":463,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-turbo-muffler-ti-exhaust-system-subaru-wrx-s4-vag-applied-a-to-c-rzcrew-2.jpg?v=1710324695","width":560},{"alt":"HKS Super Turbo Muffler Ti Exhaust System - Subaru - WRX S4 VAG APPLIED A to C - 31029-AF013V","id":25418305306806,"position":3,"preview_image":{"aspect_ratio":1.015,"height":591,"width":600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-turbo-muffler-ti-exhaust-system-subaru-wrx-s4-vag-applied-a-to-c-rzcrew-3.gif?v=1710324697"},"aspect_ratio":1.015,"height":591,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-turbo-muffler-ti-exhaust-system-subaru-wrx-s4-vag-applied-a-to-c-rzcrew-3.gif?v=1710324697","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 31029-AF013V\u003cbr\u003eType: Exhaust System\u003cbr\u003eMaterial: Titanium\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eQuiet comfortable cruising with raspy sporty sound during acceleration.\u003cb\u003eEasy to spot four big burnt titanium exhaust tail tips with HKS logo on the side.\u003cbr\u003eUltra light product, up to 48% percent compared to stainless steel version of this exhaust\u003cbr\u003e\u003cbr\u003eTail Pipe OD: 90mm x 2\u003cbr\u003ePipe Diameter: 74.7?60.5 x 2?54 x 4\u003cbr\u003e\u003cbr\u003eSpecial Notes: S207 complies with Japanese regulations.\u003cbr\u003eTail with HKS logo.\u003cbr\u003eCompatible with STI rear side under spoiler \u0026amp; STI rear under spoiler.\u003cbr\u003eCompatible with 3BA-VAG made after Aug 2020.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\n\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eWRX S4 | VAG APPLIED A | 2014-2015 | TC | FA20F | H4,WRX S4 | VAG APPLIED B | 2015-2016 | TC | FA20F | H4,WRX S4 | VAG APPLIED C | 2016-2018 | TC | FA20F | H4\u003c!--split--\u003e\u003c\/b\u003e"}

{"id":6097368285366,"title":"Mishimoto - Performance Aluminium Radiator - Subaru - WRX S4 VAG APPLIED A to C (MT)","handle":"mishimoto-performance-aluminium-radiator-subaru-wrx-s4-vag-applied-a-to-c-mt-mmrad-wrx-15","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMRAD-WRX-15\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003eDirect fit for 2015+ Subaru WRX\u003cbr\u003e\nReduces coolant temperatures by 20+°F (11+°C)\u003cbr\u003e\n117% increase in coolant capacity\u003cbr\u003e\n42% increase in coolant surface area (tubes)\u003cbr\u003e\n34% increase in air surface area (fins)\u003cbr\u003e\n15% more efficient than stock\u003cbr\u003e\n100% brazed aluminum core\u003cbr\u003e\nTIG-welded to perfection\u003cbr\u003e\nIncluded High-Pressure 1.3 Bar Radiator Cap raises the boiling point of engine coolant to provide a safer and more efficient system\u003cbr\u003e\nIncludes Magnetic Drain Plug\u003cbr\u003e\nMishimoto Lifetime Warranty\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eWRX S4 | VAG APPLIED A | 2014-2015 | TC | FA20F | H4\u003cbr\u003eWRX S4 | VAG APPLIED B | 2015-2016 | TC | FA20F | H4\u003cbr\u003eWRX S4 | VAG APPLIED C | 2016-2018 | TC | FA20F | H4\u003cbr\u003e\u003cbr\u003eNote: MT Only!\u003c!--split--\u003eMT Only!","published_at":"2020-11-22T14:42:13+08:00","created_at":"2020-11-22T14:42:16+08:00","vendor":"Mishimoto","type":"Radiators","tags":["2014","2015","2016","2017","2018","cooling","mishimoto","mt","radiators","subaru","us1","wrx-s4-vag-applied-a-2014-2015-tc-fa20f-h4","wrx-s4-vag-applied-b-2015-2016-tc-fa20f-h4","wrx-s4-vag-applied-c-2016-2018-tc-fa20f-h4","ws125"],"price":52200,"price_min":52200,"price_max":52200,"available":true,"price_varies":false,"compare_at_price":69600,"compare_at_price_min":69600,"compare_at_price_max":69600,"compare_at_price_varies":false,"variants":[{"id":37591131553974,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMRAD-WRX-15","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Performance Aluminium Radiator - Subaru - WRX S4 VAG APPLIED A to C (MT)","public_title":null,"options":["Default Title"],"price":52200,"weight":10804,"compare_at_price":69600,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMRAD-WRX-15_54fe81f6-c0c1-4b6e-9e36-4619b707aeca.jpg?v=1710194635"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMRAD-WRX-15_54fe81f6-c0c1-4b6e-9e36-4619b707aeca.jpg?v=1710194635","options":["Title"],"media":[{"alt":"Mishimoto - Performance Aluminium Radiator - Subaru - WRX S4 VAG APPLIED A to C (MT) - MMRAD-WRX-15 - RZCREWGARAGE","id":25382064488630,"position":1,"preview_image":{"aspect_ratio":1.0,"height":700,"width":700,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMRAD-WRX-15_54fe81f6-c0c1-4b6e-9e36-4619b707aeca.jpg?v=1710194635"},"aspect_ratio":1.0,"height":700,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMRAD-WRX-15_54fe81f6-c0c1-4b6e-9e36-4619b707aeca.jpg?v=1710194635","width":700}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMRAD-WRX-15\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003eDirect fit for 2015+ Subaru WRX\u003cbr\u003e\nReduces coolant temperatures by 20+°F (11+°C)\u003cbr\u003e\n117% increase in coolant capacity\u003cbr\u003e\n42% increase in coolant surface area (tubes)\u003cbr\u003e\n34% increase in air surface area (fins)\u003cbr\u003e\n15% more efficient than stock\u003cbr\u003e\n100% brazed aluminum core\u003cbr\u003e\nTIG-welded to perfection\u003cbr\u003e\nIncluded High-Pressure 1.3 Bar Radiator Cap raises the boiling point of engine coolant to provide a safer and more efficient system\u003cbr\u003e\nIncludes Magnetic Drain Plug\u003cbr\u003e\nMishimoto Lifetime Warranty\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eWRX S4 | VAG APPLIED A | 2014-2015 | TC | FA20F | H4\u003cbr\u003eWRX S4 | VAG APPLIED B | 2015-2016 | TC | FA20F | H4\u003cbr\u003eWRX S4 | VAG APPLIED C | 2016-2018 | TC | FA20F | H4\u003cbr\u003e\u003cbr\u003eNote: MT Only!\u003c!--split--\u003eMT Only!"}

{"id":6110321541302,"title":"Mishimoto - Silicone Radiator Coolant Ancillary Hoses Kit - Subaru - WRX S4 VAG APPLIED A to C","handle":"mishimoto-silicone-radiator-coolant-ancillary-hoses-kit-subaru-wrx-s4-vag-applied-a-to-c","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-WRX-15ANCBK\u003cbr\u003eHose Type: Water Hoses\u003cbr\u003e\u003cbr\u003eThe Mishimoto Silicone Ancillary Hose Kit for the 2015+ Subaru WRX is designed to improve the reliability of your vehicle and eliminate weak points found with the factory rubber hoses. We have carefully selected 13 hoses, both PCV and coolant lines, which we found can easily be replaced and benefit from the use of silicone. Mishimoto silicone hoses are crafted from four layers of silicone with heat-resistant embedded fibers to provide improved pressure and heat tolerance. PCV lines are commonly exposed to fine particles of oil which, over time, degrade the rubber and lead to eventual failure. Mishimoto silicone hoses have substantially greater resilience to these particles, providing a hose that will endure the test of time. Each hose included in this kit is designed with factory specifications in mind, resulting in a direct-fit replacement that is easy to install. This kit is available in black, blue, and red and includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship. \n * \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eWRX S4 | VAG APPLIED A | 2014-2015 | TC | FA20F | H4\u003cbr\u003eWRX S4 | VAG APPLIED B | 2015-2016 | TC | FA20F | H4\u003cbr\u003eWRX S4 | VAG APPLIED C | 2016-2018 | TC | FA20F | H4\u003c!--split--\u003e","published_at":"2020-11-28T15:44:26+08:00","created_at":"2020-11-28T15:44:29+08:00","vendor":"Mishimoto","type":"Cooling Hoses","tags":["2014","2015","2016","2017","2018","cooling","cooling-hoses","mishimoto","subaru","us1","wrx-s4-vag-applied-a-2014-2015-tc-fa20f-h4","wrx-s4-vag-applied-b-2015-2016-tc-fa20f-h4","wrx-s4-vag-applied-c-2016-2018-tc-fa20f-h4","ws137"],"price":23688,"price_min":23688,"price_max":23688,"available":true,"price_varies":false,"compare_at_price":37600,"compare_at_price_min":37600,"compare_at_price_max":37600,"compare_at_price_varies":false,"variants":[{"id":37620460028086,"title":"Black","option1":"Black","option2":null,"option3":null,"sku":"MMHOSE-WRX-15ANCBK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Silicone Radiator Coolant Ancillary Hoses Kit - Subaru - WRX S4 VAG APPLIED A to C - Black","public_title":"Black","options":["Black"],"price":23688,"weight":5134,"compare_at_price":37600,"inventory_quantity":16,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":37620460060854,"title":"Blue","option1":"Blue","option2":null,"option3":null,"sku":"MMHOSE-WRX-15ANCBL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Silicone Radiator Coolant Ancillary Hoses Kit - Subaru - WRX S4 VAG APPLIED A to C - Blue","public_title":"Blue","options":["Blue"],"price":23688,"weight":5134,"compare_at_price":37600,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":37620460093622,"title":"Red","option1":"Red","option2":null,"option3":null,"sku":"MMHOSE-WRX-15ANCRD","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Silicone Radiator Coolant Ancillary Hoses Kit - Subaru - WRX S4 VAG APPLIED A to C - Red","public_title":"Red","options":["Red"],"price":23688,"weight":5089,"compare_at_price":37600,"inventory_quantity":17,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-15ANCBK.jpg?v=1710195044","\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-15ANCBL.jpg?v=1710195046","\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-15ANCRD.jpg?v=1710195047"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-15ANCBK.jpg?v=1710195044","options":["Colour"],"media":[{"alt":"Mishimoto - Silicone Radiator Coolant Ancillary Hoses Kit - Subaru - WRX S4 VAG APPLIED A to C - RZCREWGARAGE","id":25382065635510,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-15ANCBK.jpg?v=1710195044"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-15ANCBK.jpg?v=1710195044","width":800},{"alt":"Mishimoto - Silicone Radiator Coolant Ancillary Hoses Kit - Subaru - WRX S4 VAG APPLIED A to C - RZCREWGARAGE","id":25382065668278,"position":2,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-15ANCBL.jpg?v=1710195046"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-15ANCBL.jpg?v=1710195046","width":420},{"alt":"Mishimoto - Silicone Radiator Coolant Ancillary Hoses Kit - Subaru - WRX S4 VAG APPLIED A to C - RZCREWGARAGE","id":25382065701046,"position":3,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-15ANCRD.jpg?v=1710195047"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-15ANCRD.jpg?v=1710195047","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-WRX-15ANCBK\u003cbr\u003eHose Type: Water Hoses\u003cbr\u003e\u003cbr\u003eThe Mishimoto Silicone Ancillary Hose Kit for the 2015+ Subaru WRX is designed to improve the reliability of your vehicle and eliminate weak points found with the factory rubber hoses. We have carefully selected 13 hoses, both PCV and coolant lines, which we found can easily be replaced and benefit from the use of silicone. Mishimoto silicone hoses are crafted from four layers of silicone with heat-resistant embedded fibers to provide improved pressure and heat tolerance. PCV lines are commonly exposed to fine particles of oil which, over time, degrade the rubber and lead to eventual failure. Mishimoto silicone hoses have substantially greater resilience to these particles, providing a hose that will endure the test of time. Each hose included in this kit is designed with factory specifications in mind, resulting in a direct-fit replacement that is easy to install. This kit is available in black, blue, and red and includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship. \n * \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eWRX S4 | VAG APPLIED A | 2014-2015 | TC | FA20F | H4\u003cbr\u003eWRX S4 | VAG APPLIED B | 2015-2016 | TC | FA20F | H4\u003cbr\u003eWRX S4 | VAG APPLIED C | 2016-2018 | TC | FA20F | H4\u003c!--split--\u003e"}

{"id":561993941019,"title":"Mishimoto - Subaru WRX Downpipe - VAG - MMDP-WRX-15CAT","handle":"mishimoto-subaru-wrx-downpipe-vag-mmdp-wrx-15cat","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMDP-WRX-15CAT\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX 6SPD\u003cbr\u003eDyno-proven gains of up to 57 whp and 52 wtq with the catted downpipe and a tune, using 93 octane fuel on 6-speed WRX (see additional images for dyno chart)\u003cbr\u003eDyno-proven gains of up to 73 whp and 64 wtq with the catted downpipe, a tune, and the Mishimoto Subaru WRX Performance Air Intake, using 93 octane fuel on 6-speed WRX (see additional images for dyno chart)\u003cbr\u003eSignificant torque improvement in the low end and across the entire power band\u003cbr\u003eFits with both CVT and manual transmissions\u003cbr\u003eExtremely aggressive turbo and exhaust tone under acceleration and boost\u003cbr\u003e304 stainless steel one-piece design allows for uninterrupted exhaust flow\u003cbr\u003e3\/8\" thick stainless steel, CNC-machined four-bolt flange\u003cbr\u003e3.5\" to 3.0\" transition out of turbo outlet allows exhaust gas to flow smoothly\u003cbr\u003eAdditional wideband oxygen-sensor bung and plug-in ideal location for aftermarket wideband sensors\u003cbr\u003eMates with the stock cat-back exhaust\u003cbr\u003eNew studs for turbine housing\u003cbr\u003eIncludes stock gasket for turbo outlet\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Downpipe w\/ 4-Bolt Turbo Flange and 2-Bolt Cat Flange\u003cbr\u003e(1) Stainless Steel Transmission Bracket (Manual or CVT) \u003cbr\u003e(1) High-flow Catalytic Converter (Optional) \u003cbr\u003e(1) Additional M18 x 1.5 O2 Bung with Plug \u003cbr\u003e(1) 4-Bolt Flange Gasket \u003cbr\u003e(1) 2-Bolt Flange Gasket \u003cbr\u003e(4) M10 x 1.25 Exhaust Studs\u003cbr\u003e(2) M10 x 1.25 x 40mm Hex Bolts, Stainless Steel \u003cbr\u003e(6) M10 x 1.25 Serrated Flange Nuts, Stainless Steel\u003cbr\u003e(2) M10 x 1.25 x 16mm Hex Bolts (w\/ 5mm Head Height), Stainless Steel \u003cbr\u003e(4) M10 Washers, Stainless Steel \u003cbr\u003e(2) M8 x 1.25 x 20mm Flange Bolts, Stainless Steel \u003cbr\u003e(1) M6 x 1.0 x 10mm Flange Bolt, Stainless Steel \u003cbr\u003e\u003cbr\u003eNote This product has been designed to fit both manual and CVT transmission vehicles. Customers must select the correct transmission in the drop-down menu to receive the correct bracket. \u003cbr\u003e\u003cbr\u003eThe downpipe cannot be used with the stock ECU programming. The customer must retune the vehicle's ECU after installing the downpipe. Power gains will vary depending on the type of ECU tune that is applied to the vehicle.\u003cbr\u003e\u003cbr\u003eThe Mishimoto catless downpipe is for track and off-road use only. The customer must have a professional engine tune\/calibration after installing the catless downpipe.\u003cbr\u003e\u003cbr\u003eCustomers installing the Mishimoto catted downpipe and professional engine tune\/calibration must consult with their tuner for recommendations on how to handle the boost pills.\u003cbr\u003eFits 2015+ Subaru WRX\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eWeight 18 lbs\u003cbr\u003eOverall Width 5.5\"\u003cbr\u003eOverall Length 12\"\u003cbr\u003eOverall Height 65\"\u003cbr\u003eDiameter 3.5\" at Turbo Flange\u003cbr\u003e3.0\" From First Bend to End of Pipe\u003cbr\u003eFlange Material 304 Stainless Steel\u003cbr\u003ePipe Material 304 Stainless Steel\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is proud to expand their line of 2015 WRX parts to include the performance 2015 WRX Downpipe. The biggest restriction in the stock 2015 WRX exhaust system is the downpipe. By installing the Mishimoto 2015 WRX downpipe, the FA20DIT 2015 WRX exhaust system is able to breathe easier, providing a significant increase in horsepower and torque when tuned. During countless dyno pulls, Mishimoto saw gains of up to 73 whp and 64 wtq with the 2015 WRX catted downpipe, a tune, and the Mishimoto Subaru WRX Performance Air Intake using 93 octane fuel on the 6-speed 2015 WRX (see additional images for dyno chart). \u003cbr\u003e\u003cbr\u003eWith the catted downpipe and a tune, Mishimoto saw dyno proven gains of up to 57 whp and 52 wtq using 93 octane fuel on the 6-speed 2015 WRX (see additional images for dyno chart). Above all, this 2015 WRX downpipe provides a significant torque improvement in the low end and across the entire power band. The Mishimoto 2015 WRX downpipe provided an extremely aggressive turbo and exhaust tone under acceleration and boost, giving you that aggressive tone you have been looking for! \u003cbr\u003e\u003cbr\u003eThe engineers at Mishimoto designed the 2015 WRX downpipe as a one-piece design with precision TIG-welded 304 stainless steel. This allows uninterrupted exhaust flow from the 3.5\" 4-bolt exhaust flange all the way through the 3.0\" downpipe. The engineers also created two different transmission-specific brackets, for the 6-speed manual and CVT, to mount the downpipe to the transmission. To customize the 2015 WRX downpipe even further, it is offered in either a catted or catless version. Because the engineers know that 2015 WRX owners commonly like to add wideband O2 gauges, they included an additional O2 sensor bung and plug in an ideal location for aftermarket wideband sensors! \u003cbr\u003e\u003cbr\u003eTo top it off, the 2015 WRX downpipe includes new turbine housing studs and nuts (which commonly strip), a new turbo outlet gasket, a new 3” 2-bolt flange gasket, and all stainless steel hardware, so you don’t have to worry about rust. Like all our 2015 WRX parts, this WRX downpipe comes with the Mishimoto Lifetime Warranty you know and trust.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX 6SPD\u003cbr\u003eDyno-proven gains of up to 57 whp and 52 wtq with the catted downpipe and a tune, using 93 octane fuel on 6-speed WRX (see additional images for dyno chart)\u003cbr\u003eDyno-proven gains of up to 73 whp and 64 wtq with the catted downpipe, a tune, and the Mishimoto Subaru WRX Performance Air Intake, using 93 octane fuel on 6-speed WRX (see additional images for dyno chart)\u003cbr\u003eSignificant torque improvement in the low end and across the entire power band\u003cbr\u003eFits with both CVT and manual transmissions\u003cbr\u003eExtremely aggressive turbo and exhaust tone under acceleration and boost\u003cbr\u003e304 stainless steel one-piece design allows for uninterrupted exhaust flow\u003cbr\u003e3\/8\" thick stainless steel, CNC-machined four-bolt flange\u003cbr\u003e3.5\" to 3.0\" transition out of turbo outlet allows exhaust gas to flow smoothly\u003cbr\u003eAdditional wideband oxygen-sensor bung and plug-in ideal location for aftermarket wideband sensors\u003cbr\u003eMates with the stock cat-back exhaust\u003cbr\u003eNew studs for turbine housing\u003cbr\u003eIncludes stock gasket for turbo outlet\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Downpipe w\/ 4-Bolt Turbo Flange and 2-Bolt Cat Flange\u003cbr\u003e(1) Stainless Steel Transmission Bracket (Manual or CVT) \u003cbr\u003e(1) High-flow Catalytic Converter (Optional) \u003cbr\u003e(1) Additional M18 x 1.5 O2 Bung with Plug \u003cbr\u003e(1) 4-Bolt Flange Gasket \u003cbr\u003e(1) 2-Bolt Flange Gasket \u003cbr\u003e(4) M10 x 1.25 Exhaust Studs\u003cbr\u003e(2) M10 x 1.25 x 40mm Hex Bolts, Stainless Steel \u003cbr\u003e(6) M10 x 1.25 Serrated Flange Nuts, Stainless Steel\u003cbr\u003e(2) M10 x 1.25 x 16mm Hex Bolts (w\/ 5mm Head Height), Stainless Steel \u003cbr\u003e(4) M10 Washers, Stainless Steel \u003cbr\u003e(2) M8 x 1.25 x 20mm Flange Bolts, Stainless Steel \u003cbr\u003e(1) M6 x 1.0 x 10mm Flange Bolt, Stainless Steel \u003cbr\u003e\u003cbr\u003eNote This product has been designed to fit both manual and CVT transmission vehicles. Customers must select the correct transmission in the drop-down menu to receive the correct bracket. \u003cbr\u003e\u003cbr\u003eThe downpipe cannot be used with the stock ECU programming. The customer must retune the vehicle's ECU after installing the downpipe. Power gains will vary depending on the type of ECU tune that is applied to the vehicle.\u003cbr\u003e\u003cbr\u003eThe Mishimoto catless downpipe is for track and off-road use only. The customer must have a professional engine tune\/calibration after installing the catless downpipe.\u003cbr\u003e\u003cbr\u003eCustomers installing the Mishimoto catted downpipe and professional engine tune\/calibration must consult with their tuner for recommendations on how to handle the boost pills.\u003cbr\u003eFits 2015+ Subaru WRX\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eWeight 18 lbs\u003cbr\u003eOverall Width 5.5\"\u003cbr\u003eOverall Length 12\"\u003cbr\u003eOverall Height 65\"\u003cbr\u003eDiameter 3.5\" at Turbo Flange\u003cbr\u003e3.0\" From First Bend to End of Pipe\u003cbr\u003eFlange Material 304 Stainless Steel\u003cbr\u003ePipe Material 304 Stainless Steel\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is proud to expand their line of 2015 WRX parts to include the performance 2015 WRX Downpipe. The biggest restriction in the stock 2015 WRX exhaust system is the downpipe. By installing the Mishimoto 2015 WRX downpipe, the FA20DIT 2015 WRX exhaust system is able to breathe easier, providing a significant increase in horsepower and torque when tuned. During countless dyno pulls, Mishimoto saw gains of up to 73 whp and 64 wtq with the 2015 WRX catted downpipe, a tune, and the Mishimoto Subaru WRX Performance Air Intake using 93 octane fuel on the 6-speed 2015 WRX (see additional images for dyno chart). \u003cbr\u003e\u003cbr\u003eWith the catted downpipe and a tune, Mishimoto saw dyno proven gains of up to 57 whp and 52 wtq using 93 octane fuel on the 6-speed 2015 WRX (see additional images for dyno chart). Above all, this 2015 WRX downpipe provides a significant torque improvement in the low end and across the entire power band. The Mishimoto 2015 WRX downpipe provided an extremely aggressive turbo and exhaust tone under acceleration and boost, giving you that aggressive tone you have been looking for! \u003cbr\u003e\u003cbr\u003eThe engineers at Mishimoto designed the 2015 WRX downpipe as a one-piece design with precision TIG-welded 304 stainless steel. This allows uninterrupted exhaust flow from the 3.5\" 4-bolt exhaust flange all the way through the 3.0\" downpipe. The engineers also created two different transmission-specific brackets, for the 6-speed manual and CVT, to mount the downpipe to the transmission. To customize the 2015 WRX downpipe even further, it is offered in either a catted or catless version. Because the engineers know that 2015 WRX owners commonly like to add wideband O2 gauges, they included an additional O2 sensor bung and plug in an ideal location for aftermarket wideband sensors! \u003cbr\u003e\u003cbr\u003eTo top it off, the 2015 WRX downpipe includes new turbine housing studs and nuts (which commonly strip), a new turbo outlet gasket, a new 3” 2-bolt flange gasket, and all stainless steel hardware, so you don’t have to worry about rust. Like all our 2015 WRX parts, this WRX downpipe comes with the Mishimoto Lifetime Warranty you know and trust.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:25:36+08:00","created_at":"2018-01-24T23:25:38+08:00","vendor":"Mishimoto","type":"Catbacks - Exhaust Manifolds","tags":["2014","2015","2016","2017","2018","catbacks-exhaust-manifolds","down-pipe","exhaust","mishimoto","subaru","us1","wrx-s4-vag-applied-a-2014-2015-tc-fa20f-h4","wrx-s4-vag-applied-b-2015-2016-tc-fa20f-h4","wrx-s4-vag-applied-c-2016-2018-tc-fa20f-h4","ws18"],"price":108100,"price_min":108100,"price_max":108100,"available":true,"price_varies":false,"compare_at_price":117500,"compare_at_price_min":117500,"compare_at_price_max":117500,"compare_at_price_varies":false,"variants":[{"id":5990392987675,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMDP-WRX-15CAT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX Downpipe - VAG - MMDP-WRX-15CAT","public_title":null,"options":["Default Title"],"price":108100,"weight":13843,"compare_at_price":117500,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMDP-WRX-15CAT.jpg?v=1710154124"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMDP-WRX-15CAT.jpg?v=1710154124","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX Downpipe - VAG - MMDP-WRX-15CAT - Rzcrewgarage","id":1351402422369,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMDP-WRX-15CAT.jpg?v=1710154124"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMDP-WRX-15CAT.jpg?v=1710154124","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMDP-WRX-15CAT\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX 6SPD\u003cbr\u003eDyno-proven gains of up to 57 whp and 52 wtq with the catted downpipe and a tune, using 93 octane fuel on 6-speed WRX (see additional images for dyno chart)\u003cbr\u003eDyno-proven gains of up to 73 whp and 64 wtq with the catted downpipe, a tune, and the Mishimoto Subaru WRX Performance Air Intake, using 93 octane fuel on 6-speed WRX (see additional images for dyno chart)\u003cbr\u003eSignificant torque improvement in the low end and across the entire power band\u003cbr\u003eFits with both CVT and manual transmissions\u003cbr\u003eExtremely aggressive turbo and exhaust tone under acceleration and boost\u003cbr\u003e304 stainless steel one-piece design allows for uninterrupted exhaust flow\u003cbr\u003e3\/8\" thick stainless steel, CNC-machined four-bolt flange\u003cbr\u003e3.5\" to 3.0\" transition out of turbo outlet allows exhaust gas to flow smoothly\u003cbr\u003eAdditional wideband oxygen-sensor bung and plug-in ideal location for aftermarket wideband sensors\u003cbr\u003eMates with the stock cat-back exhaust\u003cbr\u003eNew studs for turbine housing\u003cbr\u003eIncludes stock gasket for turbo outlet\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Downpipe w\/ 4-Bolt Turbo Flange and 2-Bolt Cat Flange\u003cbr\u003e(1) Stainless Steel Transmission Bracket (Manual or CVT) \u003cbr\u003e(1) High-flow Catalytic Converter (Optional) \u003cbr\u003e(1) Additional M18 x 1.5 O2 Bung with Plug \u003cbr\u003e(1) 4-Bolt Flange Gasket \u003cbr\u003e(1) 2-Bolt Flange Gasket \u003cbr\u003e(4) M10 x 1.25 Exhaust Studs\u003cbr\u003e(2) M10 x 1.25 x 40mm Hex Bolts, Stainless Steel \u003cbr\u003e(6) M10 x 1.25 Serrated Flange Nuts, Stainless Steel\u003cbr\u003e(2) M10 x 1.25 x 16mm Hex Bolts (w\/ 5mm Head Height), Stainless Steel \u003cbr\u003e(4) M10 Washers, Stainless Steel \u003cbr\u003e(2) M8 x 1.25 x 20mm Flange Bolts, Stainless Steel \u003cbr\u003e(1) M6 x 1.0 x 10mm Flange Bolt, Stainless Steel \u003cbr\u003e\u003cbr\u003eNote This product has been designed to fit both manual and CVT transmission vehicles. Customers must select the correct transmission in the drop-down menu to receive the correct bracket. \u003cbr\u003e\u003cbr\u003eThe downpipe cannot be used with the stock ECU programming. The customer must retune the vehicle's ECU after installing the downpipe. Power gains will vary depending on the type of ECU tune that is applied to the vehicle.\u003cbr\u003e\u003cbr\u003eThe Mishimoto catless downpipe is for track and off-road use only. The customer must have a professional engine tune\/calibration after installing the catless downpipe.\u003cbr\u003e\u003cbr\u003eCustomers installing the Mishimoto catted downpipe and professional engine tune\/calibration must consult with their tuner for recommendations on how to handle the boost pills.\u003cbr\u003eFits 2015+ Subaru WRX\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eWeight 18 lbs\u003cbr\u003eOverall Width 5.5\"\u003cbr\u003eOverall Length 12\"\u003cbr\u003eOverall Height 65\"\u003cbr\u003eDiameter 3.5\" at Turbo Flange\u003cbr\u003e3.0\" From First Bend to End of Pipe\u003cbr\u003eFlange Material 304 Stainless Steel\u003cbr\u003ePipe Material 304 Stainless Steel\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is proud to expand their line of 2015 WRX parts to include the performance 2015 WRX Downpipe. The biggest restriction in the stock 2015 WRX exhaust system is the downpipe. By installing the Mishimoto 2015 WRX downpipe, the FA20DIT 2015 WRX exhaust system is able to breathe easier, providing a significant increase in horsepower and torque when tuned. During countless dyno pulls, Mishimoto saw gains of up to 73 whp and 64 wtq with the 2015 WRX catted downpipe, a tune, and the Mishimoto Subaru WRX Performance Air Intake using 93 octane fuel on the 6-speed 2015 WRX (see additional images for dyno chart). \u003cbr\u003e\u003cbr\u003eWith the catted downpipe and a tune, Mishimoto saw dyno proven gains of up to 57 whp and 52 wtq using 93 octane fuel on the 6-speed 2015 WRX (see additional images for dyno chart). Above all, this 2015 WRX downpipe provides a significant torque improvement in the low end and across the entire power band. The Mishimoto 2015 WRX downpipe provided an extremely aggressive turbo and exhaust tone under acceleration and boost, giving you that aggressive tone you have been looking for! \u003cbr\u003e\u003cbr\u003eThe engineers at Mishimoto designed the 2015 WRX downpipe as a one-piece design with precision TIG-welded 304 stainless steel. This allows uninterrupted exhaust flow from the 3.5\" 4-bolt exhaust flange all the way through the 3.0\" downpipe. The engineers also created two different transmission-specific brackets, for the 6-speed manual and CVT, to mount the downpipe to the transmission. To customize the 2015 WRX downpipe even further, it is offered in either a catted or catless version. Because the engineers know that 2015 WRX owners commonly like to add wideband O2 gauges, they included an additional O2 sensor bung and plug in an ideal location for aftermarket wideband sensors! \u003cbr\u003e\u003cbr\u003eTo top it off, the 2015 WRX downpipe includes new turbine housing studs and nuts (which commonly strip), a new turbo outlet gasket, a new 3” 2-bolt flange gasket, and all stainless steel hardware, so you don’t have to worry about rust. Like all our 2015 WRX parts, this WRX downpipe comes with the Mishimoto Lifetime Warranty you know and trust.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX 6SPD\u003cbr\u003eDyno-proven gains of up to 57 whp and 52 wtq with the catted downpipe and a tune, using 93 octane fuel on 6-speed WRX (see additional images for dyno chart)\u003cbr\u003eDyno-proven gains of up to 73 whp and 64 wtq with the catted downpipe, a tune, and the Mishimoto Subaru WRX Performance Air Intake, using 93 octane fuel on 6-speed WRX (see additional images for dyno chart)\u003cbr\u003eSignificant torque improvement in the low end and across the entire power band\u003cbr\u003eFits with both CVT and manual transmissions\u003cbr\u003eExtremely aggressive turbo and exhaust tone under acceleration and boost\u003cbr\u003e304 stainless steel one-piece design allows for uninterrupted exhaust flow\u003cbr\u003e3\/8\" thick stainless steel, CNC-machined four-bolt flange\u003cbr\u003e3.5\" to 3.0\" transition out of turbo outlet allows exhaust gas to flow smoothly\u003cbr\u003eAdditional wideband oxygen-sensor bung and plug-in ideal location for aftermarket wideband sensors\u003cbr\u003eMates with the stock cat-back exhaust\u003cbr\u003eNew studs for turbine housing\u003cbr\u003eIncludes stock gasket for turbo outlet\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Downpipe w\/ 4-Bolt Turbo Flange and 2-Bolt Cat Flange\u003cbr\u003e(1) Stainless Steel Transmission Bracket (Manual or CVT) \u003cbr\u003e(1) High-flow Catalytic Converter (Optional) \u003cbr\u003e(1) Additional M18 x 1.5 O2 Bung with Plug \u003cbr\u003e(1) 4-Bolt Flange Gasket \u003cbr\u003e(1) 2-Bolt Flange Gasket \u003cbr\u003e(4) M10 x 1.25 Exhaust Studs\u003cbr\u003e(2) M10 x 1.25 x 40mm Hex Bolts, Stainless Steel \u003cbr\u003e(6) M10 x 1.25 Serrated Flange Nuts, Stainless Steel\u003cbr\u003e(2) M10 x 1.25 x 16mm Hex Bolts (w\/ 5mm Head Height), Stainless Steel \u003cbr\u003e(4) M10 Washers, Stainless Steel \u003cbr\u003e(2) M8 x 1.25 x 20mm Flange Bolts, Stainless Steel \u003cbr\u003e(1) M6 x 1.0 x 10mm Flange Bolt, Stainless Steel \u003cbr\u003e\u003cbr\u003eNote This product has been designed to fit both manual and CVT transmission vehicles. Customers must select the correct transmission in the drop-down menu to receive the correct bracket. \u003cbr\u003e\u003cbr\u003eThe downpipe cannot be used with the stock ECU programming. The customer must retune the vehicle's ECU after installing the downpipe. Power gains will vary depending on the type of ECU tune that is applied to the vehicle.\u003cbr\u003e\u003cbr\u003eThe Mishimoto catless downpipe is for track and off-road use only. The customer must have a professional engine tune\/calibration after installing the catless downpipe.\u003cbr\u003e\u003cbr\u003eCustomers installing the Mishimoto catted downpipe and professional engine tune\/calibration must consult with their tuner for recommendations on how to handle the boost pills.\u003cbr\u003eFits 2015+ Subaru WRX\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eWeight 18 lbs\u003cbr\u003eOverall Width 5.5\"\u003cbr\u003eOverall Length 12\"\u003cbr\u003eOverall Height 65\"\u003cbr\u003eDiameter 3.5\" at Turbo Flange\u003cbr\u003e3.0\" From First Bend to End of Pipe\u003cbr\u003eFlange Material 304 Stainless Steel\u003cbr\u003ePipe Material 304 Stainless Steel\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is proud to expand their line of 2015 WRX parts to include the performance 2015 WRX Downpipe. The biggest restriction in the stock 2015 WRX exhaust system is the downpipe. By installing the Mishimoto 2015 WRX downpipe, the FA20DIT 2015 WRX exhaust system is able to breathe easier, providing a significant increase in horsepower and torque when tuned. During countless dyno pulls, Mishimoto saw gains of up to 73 whp and 64 wtq with the 2015 WRX catted downpipe, a tune, and the Mishimoto Subaru WRX Performance Air Intake using 93 octane fuel on the 6-speed 2015 WRX (see additional images for dyno chart). \u003cbr\u003e\u003cbr\u003eWith the catted downpipe and a tune, Mishimoto saw dyno proven gains of up to 57 whp and 52 wtq using 93 octane fuel on the 6-speed 2015 WRX (see additional images for dyno chart). Above all, this 2015 WRX downpipe provides a significant torque improvement in the low end and across the entire power band. The Mishimoto 2015 WRX downpipe provided an extremely aggressive turbo and exhaust tone under acceleration and boost, giving you that aggressive tone you have been looking for! \u003cbr\u003e\u003cbr\u003eThe engineers at Mishimoto designed the 2015 WRX downpipe as a one-piece design with precision TIG-welded 304 stainless steel. This allows uninterrupted exhaust flow from the 3.5\" 4-bolt exhaust flange all the way through the 3.0\" downpipe. The engineers also created two different transmission-specific brackets, for the 6-speed manual and CVT, to mount the downpipe to the transmission. To customize the 2015 WRX downpipe even further, it is offered in either a catted or catless version. Because the engineers know that 2015 WRX owners commonly like to add wideband O2 gauges, they included an additional O2 sensor bung and plug in an ideal location for aftermarket wideband sensors! \u003cbr\u003e\u003cbr\u003eTo top it off, the 2015 WRX downpipe includes new turbine housing studs and nuts (which commonly strip), a new turbo outlet gasket, a new 3” 2-bolt flange gasket, and all stainless steel hardware, so you don’t have to worry about rust. Like all our 2015 WRX parts, this WRX downpipe comes with the Mishimoto Lifetime Warranty you know and trust.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":562201067547,"title":"Mishimoto - Subaru WRX Oil Cooler Kit - Black - VAG - MMOC-WRX-15BK","handle":"mishimoto-subaru-wrx-oil-cooler-kit-black-vag-mmoc-wrx-15bk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-15BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX\u003cbr\u003eProven 20+°F (11.1+°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined aluminum spacer for the oil sandwich plate\u003cbr\u003eSilicone hose bypasses stock liquid-to-liquid heat exchanger\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 25°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets\u003cbr\u003e(1) Application-Specific Oil Sandwich Plate\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings \u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20 x M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Large O-Ring\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is expanding their line of 2015 WRX parts! High oil temperatures can wreak havoc on your high-performance 2015 WRX FA20 DIT. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2015+ Subaru WRX. The 2015 WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock 2015 WRX liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit is designed to work in conjunction with the stock liquid-to-liquid to maintain optimal oil temperature. Properly regulated oil temperatures becomes even more important if you have modified your vehicle or spend time tracking your 2015 WRX. Mishimoto's direct-fit 2015 WRX oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific CNC-machined aluminum sandwich plate has been designed to allow proper clearance of the stock oil filter. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your 2015 WRX can achieve a +25°F (+13.9°C) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our 2015 WRX parts, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX\u003cbr\u003eProven 20+°F (11.1+°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined aluminum spacer for the oil sandwich plate\u003cbr\u003eSilicone hose bypasses stock liquid-to-liquid heat exchanger\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 25°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets\u003cbr\u003e(1) Application-Specific Oil Sandwich Plate\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings \u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20 x M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Large O-Ring\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is expanding their line of 2015 WRX parts! High oil temperatures can wreak havoc on your high-performance 2015 WRX FA20 DIT. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2015+ Subaru WRX. The 2015 WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock 2015 WRX liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit is designed to work in conjunction with the stock liquid-to-liquid to maintain optimal oil temperature. Properly regulated oil temperatures becomes even more important if you have modified your vehicle or spend time tracking your 2015 WRX. Mishimoto's direct-fit 2015 WRX oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific CNC-machined aluminum sandwich plate has been designed to allow proper clearance of the stock oil filter. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your 2015 WRX can achieve a +25°F (+13.9°C) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our 2015 WRX parts, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-25T00:19:23+08:00","created_at":"2018-01-25T00:19:24+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2014","2015","2016","2017","2018","car-specific","cooling","mishimoto","oil-cooler-kits","oil-coolers","subaru","us1","wrx-s4-vag-applied-a-2014-2015-tc-fa20f-h4","wrx-s4-vag-applied-b-2015-2016-tc-fa20f-h4","wrx-s4-vag-applied-c-2016-2018-tc-fa20f-h4","ws112"],"price":93896,"price_min":93896,"price_max":93896,"available":true,"price_varies":false,"compare_at_price":106700,"compare_at_price_min":106700,"compare_at_price_max":106700,"compare_at_price_varies":false,"variants":[{"id":5990721552411,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-WRX-15BK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX Oil Cooler Kit - Black - VAG - MMOC-WRX-15BK","public_title":null,"options":["Default Title"],"price":93896,"weight":9352,"compare_at_price":106700,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-15BK_b0958e94-83e2-4e5f-84bc-8c2c1e373a82.jpg?v=1710154206"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-15BK_b0958e94-83e2-4e5f-84bc-8c2c1e373a82.jpg?v=1710154206","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX Oil Cooler Kit - Black - VAG - MMOC-WRX-15BK - Rzcrewgarage","id":1351399997537,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-15BK_b0958e94-83e2-4e5f-84bc-8c2c1e373a82.jpg?v=1710154206"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-15BK_b0958e94-83e2-4e5f-84bc-8c2c1e373a82.jpg?v=1710154206","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-15BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX\u003cbr\u003eProven 20+°F (11.1+°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined aluminum spacer for the oil sandwich plate\u003cbr\u003eSilicone hose bypasses stock liquid-to-liquid heat exchanger\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 25°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets\u003cbr\u003e(1) Application-Specific Oil Sandwich Plate\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings \u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20 x M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Large O-Ring\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is expanding their line of 2015 WRX parts! High oil temperatures can wreak havoc on your high-performance 2015 WRX FA20 DIT. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2015+ Subaru WRX. The 2015 WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock 2015 WRX liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit is designed to work in conjunction with the stock liquid-to-liquid to maintain optimal oil temperature. Properly regulated oil temperatures becomes even more important if you have modified your vehicle or spend time tracking your 2015 WRX. Mishimoto's direct-fit 2015 WRX oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific CNC-machined aluminum sandwich plate has been designed to allow proper clearance of the stock oil filter. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your 2015 WRX can achieve a +25°F (+13.9°C) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our 2015 WRX parts, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX\u003cbr\u003eProven 20+°F (11.1+°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined aluminum spacer for the oil sandwich plate\u003cbr\u003eSilicone hose bypasses stock liquid-to-liquid heat exchanger\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 25°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets\u003cbr\u003e(1) Application-Specific Oil Sandwich Plate\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings \u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20 x M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Large O-Ring\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is expanding their line of 2015 WRX parts! High oil temperatures can wreak havoc on your high-performance 2015 WRX FA20 DIT. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2015+ Subaru WRX. The 2015 WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock 2015 WRX liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit is designed to work in conjunction with the stock liquid-to-liquid to maintain optimal oil temperature. Properly regulated oil temperatures becomes even more important if you have modified your vehicle or spend time tracking your 2015 WRX. Mishimoto's direct-fit 2015 WRX oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific CNC-machined aluminum sandwich plate has been designed to allow proper clearance of the stock oil filter. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your 2015 WRX can achieve a +25°F (+13.9°C) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our 2015 WRX parts, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":562200576027,"title":"Mishimoto - Subaru WRX Oil Cooler Kit - VAG - MMOC-WRX-15","handle":"mishimoto-subaru-wrx-oil-cooler-kit-vag-mmoc-wrx-15","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-15\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX\u003cbr\u003eProven 20+°F (11.1+°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined aluminum spacer for the oil sandwich plate\u003cbr\u003eSilicone hose bypasses stock liquid-to-liquid heat exchanger\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 25°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets\u003cbr\u003e(1) Application-Specific Oil Sandwich Plate\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings \u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20 x M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Large O-Ring\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is expanding their line of 2015 WRX parts! High oil temperatures can wreak havoc on your high-performance 2015 WRX FA20 DIT. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2015+ Subaru WRX. The 2015 WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock 2015 WRX liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit is designed to work in conjunction with the stock liquid-to-liquid to maintain optimal oil temperature. Properly regulated oil temperatures becomes even more important if you have modified your vehicle or spend time tracking your 2015 WRX. Mishimoto's direct-fit 2015 WRX oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific CNC-machined aluminum sandwich plate has been designed to allow proper clearance of the stock oil filter. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your 2015 WRX can achieve a +25°F (+13.9°C) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our 2015 WRX parts, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX\u003cbr\u003eProven 20+°F (11.1+°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined aluminum spacer for the oil sandwich plate\u003cbr\u003eSilicone hose bypasses stock liquid-to-liquid heat exchanger\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 25°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets\u003cbr\u003e(1) Application-Specific Oil Sandwich Plate\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings \u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20 x M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Large O-Ring\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is expanding their line of 2015 WRX parts! High oil temperatures can wreak havoc on your high-performance 2015 WRX FA20 DIT. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2015+ Subaru WRX. The 2015 WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock 2015 WRX liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit is designed to work in conjunction with the stock liquid-to-liquid to maintain optimal oil temperature. Properly regulated oil temperatures becomes even more important if you have modified your vehicle or spend time tracking your 2015 WRX. Mishimoto's direct-fit 2015 WRX oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific CNC-machined aluminum sandwich plate has been designed to allow proper clearance of the stock oil filter. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your 2015 WRX can achieve a +25°F (+13.9°C) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our 2015 WRX parts, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 5 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-25T00:19:23+08:00","created_at":"2018-01-25T00:19:23+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2014","2015","2016","2017","2018","car-specific","cooling","mishimoto","oil-cooler-kits","oil-coolers","subaru","us1","wrx-s4-vag-applied-a-2014-2015-tc-fa20f-h4","wrx-s4-vag-applied-b-2015-2016-tc-fa20f-h4","wrx-s4-vag-applied-c-2016-2018-tc-fa20f-h4","ws112"],"price":93896,"price_min":93896,"price_max":93896,"available":true,"price_varies":false,"compare_at_price":106700,"compare_at_price_min":106700,"compare_at_price_max":106700,"compare_at_price_varies":false,"variants":[{"id":5990720995355,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-WRX-15","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX Oil Cooler Kit - VAG - MMOC-WRX-15","public_title":null,"options":["Default Title"],"price":93896,"weight":9398,"compare_at_price":106700,"inventory_quantity":16,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-15_65dde1ce-4e2b-46ca-8cac-64459a0a9001.jpg?v=1710154206"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-15_65dde1ce-4e2b-46ca-8cac-64459a0a9001.jpg?v=1710154206","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX Oil Cooler Kit - VAG - MMOC-WRX-15 - Rzcrewgarage","id":1351399964769,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-15_65dde1ce-4e2b-46ca-8cac-64459a0a9001.jpg?v=1710154206"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-15_65dde1ce-4e2b-46ca-8cac-64459a0a9001.jpg?v=1710154206","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-15\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX\u003cbr\u003eProven 20+°F (11.1+°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined aluminum spacer for the oil sandwich plate\u003cbr\u003eSilicone hose bypasses stock liquid-to-liquid heat exchanger\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 25°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets\u003cbr\u003e(1) Application-Specific Oil Sandwich Plate\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings \u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20 x M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Large O-Ring\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is expanding their line of 2015 WRX parts! High oil temperatures can wreak havoc on your high-performance 2015 WRX FA20 DIT. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2015+ Subaru WRX. The 2015 WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock 2015 WRX liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit is designed to work in conjunction with the stock liquid-to-liquid to maintain optimal oil temperature. Properly regulated oil temperatures becomes even more important if you have modified your vehicle or spend time tracking your 2015 WRX. Mishimoto's direct-fit 2015 WRX oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific CNC-machined aluminum sandwich plate has been designed to allow proper clearance of the stock oil filter. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your 2015 WRX can achieve a +25°F (+13.9°C) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our 2015 WRX parts, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX\u003cbr\u003eProven 20+°F (11.1+°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined aluminum spacer for the oil sandwich plate\u003cbr\u003eSilicone hose bypasses stock liquid-to-liquid heat exchanger\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 25°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets\u003cbr\u003e(1) Application-Specific Oil Sandwich Plate\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings \u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20 x M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Large O-Ring\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is expanding their line of 2015 WRX parts! High oil temperatures can wreak havoc on your high-performance 2015 WRX FA20 DIT. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2015+ Subaru WRX. The 2015 WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock 2015 WRX liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit is designed to work in conjunction with the stock liquid-to-liquid to maintain optimal oil temperature. Properly regulated oil temperatures becomes even more important if you have modified your vehicle or spend time tracking your 2015 WRX. Mishimoto's direct-fit 2015 WRX oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific CNC-machined aluminum sandwich plate has been designed to allow proper clearance of the stock oil filter. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your 2015 WRX can achieve a +25°F (+13.9°C) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our 2015 WRX parts, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 5 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561997414427,"title":"Mishimoto - Subaru WRX Silicone Radiator Hose Kit - Black - VAG SJ5 SJG - MMHOSE-WRX-15BK","handle":"mishimoto-subaru-wrx-silicone-radiator-hose-kit-black-vag-sj5-sjg-mmhose-wrx-15bk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-WRX-15BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2015+ Subaru WRX\u003cbr\u003eConstructed from four layers of silicone with heat-resistant embedded fibers\u003cbr\u003eImproves heat and pressure tolerance\u003cbr\u003eIncludes high-quality worm-gear clamps for ease of installation\u003cbr\u003eIncludes upper radiator hose, lower radiator hose, and coolant overflow hose\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Silicone Hoses\u003cbr\u003e(4) Worm-Gear Clamps\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eAlso Fits 2015+ Subaru WRX, 2014+ Subaru Forester XT\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 0.55\" \u003cbr\u003eHose 2: 1.89\" \u003cbr\u003eHose 3: 1.89\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 0.28\" \u003cbr\u003eHose 2: 1.54\" \u003cbr\u003eHose 3: 1.54\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eRubber is out, silicone is in! Upgrade your stock 2015 WRX radiator hoses with the Mishimoto Silicone Radiator Hose Kit to provide your 2015 WRX with an advancement in both style and reliability. This 2015 WRX kit includes the upper radiator hose, lower radiator hose, overflow port hose, as well as four worm-gear clamps to make these 2015 WRX parts easy to install. Unlike the degradation-prone stock rubber hoses, the Mishimoto 2015 WRX hoses are constructed from four layers of silicone with heat-resistant embedded fibers to provide unmatched durability, heat tolerance, and pressure tolerance. Whether you are entering your 2015 WRX in the local rallycross, or lapping at your next track day, trust Mishimoto and our line of 2015 WRX parts to keep your WRX cool. This 2015 WRX hose kit is available in black, blue, or red and, like our entire line of 2015 WRX parts, includes the signature Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2015+ Subaru WRX\u003cbr\u003eConstructed from four layers of silicone with heat-resistant embedded fibers\u003cbr\u003eImproves heat and pressure tolerance\u003cbr\u003eIncludes high-quality worm-gear clamps for ease of installation\u003cbr\u003eIncludes upper radiator hose, lower radiator hose, and coolant overflow hose\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Silicone Hoses\u003cbr\u003e(4) Worm-Gear Clamps\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eAlso Fits 2015+ Subaru WRX, 2014+ Subaru Forester XT\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 0.55\" \u003cbr\u003eHose 2: 1.89\" \u003cbr\u003eHose 3: 1.89\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 0.28\" \u003cbr\u003eHose 2: 1.54\" \u003cbr\u003eHose 3: 1.54\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eRubber is out, silicone is in! Upgrade your stock 2015 WRX radiator hoses with the Mishimoto Silicone Radiator Hose Kit to provide your 2015 WRX with an advancement in both style and reliability. This 2015 WRX kit includes the upper radiator hose, lower radiator hose, overflow port hose, as well as four worm-gear clamps to make these 2015 WRX parts easy to install. Unlike the degradation-prone stock rubber hoses, the Mishimoto 2015 WRX hoses are constructed from four layers of silicone with heat-resistant embedded fibers to provide unmatched durability, heat tolerance, and pressure tolerance. Whether you are entering your 2015 WRX in the local rallycross, or lapping at your next track day, trust Mishimoto and our line of 2015 WRX parts to keep your WRX cool. This 2015 WRX hose kit is available in black, blue, or red and, like our entire line of 2015 WRX parts, includes the signature Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:26:11+08:00","created_at":"2018-01-24T23:26:12+08:00","vendor":"Mishimoto","type":"Cooling Hoses","tags":["2010","2011","2012","2013","2014","2015","2016","2017","2018","cooling","cooling-hoses","forester-sj5-applied-a-2012-2014-na-fb20-h4","forester-sj5-applied-b-2014-2014-na-fb20-h4","forester-sj5-applied-c-2014-2018-na-fb20-h4","forester-sjg-applied-a-2012-2014-na-fb20-h4","forester-sjg-applied-a-2012-2014-tc-fb20-h4","forester-sjg-applied-b-2014-2014-na-fb20-h4","forester-sjg-applied-b-2014-2014-tc-fb20-h4","forester-sjg-applied-c-2014-2015-na-fb20-h4","forester-sjg-applied-c-2014-2015-tc-fb20-h4","forester-sjg-applied-d-2015-2018-na-fb20-h4","forester-sjg-applied-d-2015-2018-tc-fb20-h4","mishimoto","radiator-hose-kits","subaru","us1","wrx-s4-vag-applied-a-2014-2015-tc-fa20f-h4","wrx-s4-vag-applied-b-2015-2016-tc-fa20f-h4","wrx-s4-vag-applied-c-2016-2018-tc-fa20f-h4","ws136"],"price":17920,"price_min":17920,"price_max":17920,"available":true,"price_varies":false,"compare_at_price":28000,"compare_at_price_min":28000,"compare_at_price_max":28000,"compare_at_price_varies":false,"variants":[{"id":5990396624923,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-WRX-15BK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX Silicone Radiator Hose Kit - Black - VAG SJ5 SJG - MMHOSE-WRX-15BK","public_title":null,"options":["Default Title"],"price":17920,"weight":4771,"compare_at_price":28000,"inventory_quantity":19,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-15BK.jpg?v=1710154147"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-15BK.jpg?v=1710154147","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX Silicone Radiator Hose Kit - Black - VAG SJ5 SJG - MMHOSE-WRX-15BK - Rzcrewgarage","id":1351403798625,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-15BK.jpg?v=1710154147"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-15BK.jpg?v=1710154147","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-WRX-15BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2015+ Subaru WRX\u003cbr\u003eConstructed from four layers of silicone with heat-resistant embedded fibers\u003cbr\u003eImproves heat and pressure tolerance\u003cbr\u003eIncludes high-quality worm-gear clamps for ease of installation\u003cbr\u003eIncludes upper radiator hose, lower radiator hose, and coolant overflow hose\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Silicone Hoses\u003cbr\u003e(4) Worm-Gear Clamps\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eAlso Fits 2015+ Subaru WRX, 2014+ Subaru Forester XT\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 0.55\" \u003cbr\u003eHose 2: 1.89\" \u003cbr\u003eHose 3: 1.89\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 0.28\" \u003cbr\u003eHose 2: 1.54\" \u003cbr\u003eHose 3: 1.54\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eRubber is out, silicone is in! Upgrade your stock 2015 WRX radiator hoses with the Mishimoto Silicone Radiator Hose Kit to provide your 2015 WRX with an advancement in both style and reliability. This 2015 WRX kit includes the upper radiator hose, lower radiator hose, overflow port hose, as well as four worm-gear clamps to make these 2015 WRX parts easy to install. Unlike the degradation-prone stock rubber hoses, the Mishimoto 2015 WRX hoses are constructed from four layers of silicone with heat-resistant embedded fibers to provide unmatched durability, heat tolerance, and pressure tolerance. Whether you are entering your 2015 WRX in the local rallycross, or lapping at your next track day, trust Mishimoto and our line of 2015 WRX parts to keep your WRX cool. This 2015 WRX hose kit is available in black, blue, or red and, like our entire line of 2015 WRX parts, includes the signature Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2015+ Subaru WRX\u003cbr\u003eConstructed from four layers of silicone with heat-resistant embedded fibers\u003cbr\u003eImproves heat and pressure tolerance\u003cbr\u003eIncludes high-quality worm-gear clamps for ease of installation\u003cbr\u003eIncludes upper radiator hose, lower radiator hose, and coolant overflow hose\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Silicone Hoses\u003cbr\u003e(4) Worm-Gear Clamps\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eAlso Fits 2015+ Subaru WRX, 2014+ Subaru Forester XT\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 0.55\" \u003cbr\u003eHose 2: 1.89\" \u003cbr\u003eHose 3: 1.89\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 0.28\" \u003cbr\u003eHose 2: 1.54\" \u003cbr\u003eHose 3: 1.54\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eRubber is out, silicone is in! Upgrade your stock 2015 WRX radiator hoses with the Mishimoto Silicone Radiator Hose Kit to provide your 2015 WRX with an advancement in both style and reliability. This 2015 WRX kit includes the upper radiator hose, lower radiator hose, overflow port hose, as well as four worm-gear clamps to make these 2015 WRX parts easy to install. Unlike the degradation-prone stock rubber hoses, the Mishimoto 2015 WRX hoses are constructed from four layers of silicone with heat-resistant embedded fibers to provide unmatched durability, heat tolerance, and pressure tolerance. Whether you are entering your 2015 WRX in the local rallycross, or lapping at your next track day, trust Mishimoto and our line of 2015 WRX parts to keep your WRX cool. This 2015 WRX hose kit is available in black, blue, or red and, like our entire line of 2015 WRX parts, includes the signature Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561997447195,"title":"Mishimoto - Subaru WRX Silicone Radiator Hose Kit - Blue - VAG SJ5 SJG - MMHOSE-WRX-15BL","handle":"mishimoto-subaru-wrx-silicone-radiator-hose-kit-blue-vag-sj5-sjg-mmhose-wrx-15bl","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-WRX-15BL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2015+ Subaru WRX\u003cbr\u003eConstructed from four layers of silicone with heat-resistant embedded fibers\u003cbr\u003eImproves heat and pressure tolerance\u003cbr\u003eIncludes high-quality worm-gear clamps for ease of installation\u003cbr\u003eIncludes upper radiator hose, lower radiator hose, and coolant overflow hose\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Silicone Hoses\u003cbr\u003e(4) Worm-Gear Clamps\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eAlso Fits 2015+ Subaru WRX, 2014+ Subaru Forester XT\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 0.55\" \u003cbr\u003eHose 2: 1.89\" \u003cbr\u003eHose 3: 1.89\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 0.28\" \u003cbr\u003eHose 2: 1.54\" \u003cbr\u003eHose 3: 1.54\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eRubber is out, silicone is in! Upgrade your stock 2015 WRX radiator hoses with the Mishimoto Silicone Radiator Hose Kit to provide your 2015 WRX with an advancement in both style and reliability. This 2015 WRX kit includes the upper radiator hose, lower radiator hose, overflow port hose, as well as four worm-gear clamps to make these 2015 WRX parts easy to install. Unlike the degradation-prone stock rubber hoses, the Mishimoto 2015 WRX hoses are constructed from four layers of silicone with heat-resistant embedded fibers to provide unmatched durability, heat tolerance, and pressure tolerance. Whether you are entering your 2015 WRX in the local rallycross, or lapping at your next track day, trust Mishimoto and our line of 2015 WRX parts to keep your WRX cool. This 2015 WRX hose kit is available in black, blue, or red and, like our entire line of 2015 WRX parts, includes the signature Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2015+ Subaru WRX\u003cbr\u003eConstructed from four layers of silicone with heat-resistant embedded fibers\u003cbr\u003eImproves heat and pressure tolerance\u003cbr\u003eIncludes high-quality worm-gear clamps for ease of installation\u003cbr\u003eIncludes upper radiator hose, lower radiator hose, and coolant overflow hose\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Silicone Hoses\u003cbr\u003e(4) Worm-Gear Clamps\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eAlso Fits 2015+ Subaru WRX, 2014+ Subaru Forester XT\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 0.55\" \u003cbr\u003eHose 2: 1.89\" \u003cbr\u003eHose 3: 1.89\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 0.28\" \u003cbr\u003eHose 2: 1.54\" \u003cbr\u003eHose 3: 1.54\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eRubber is out, silicone is in! Upgrade your stock 2015 WRX radiator hoses with the Mishimoto Silicone Radiator Hose Kit to provide your 2015 WRX with an advancement in both style and reliability. This 2015 WRX kit includes the upper radiator hose, lower radiator hose, overflow port hose, as well as four worm-gear clamps to make these 2015 WRX parts easy to install. Unlike the degradation-prone stock rubber hoses, the Mishimoto 2015 WRX hoses are constructed from four layers of silicone with heat-resistant embedded fibers to provide unmatched durability, heat tolerance, and pressure tolerance. Whether you are entering your 2015 WRX in the local rallycross, or lapping at your next track day, trust Mishimoto and our line of 2015 WRX parts to keep your WRX cool. This 2015 WRX hose kit is available in black, blue, or red and, like our entire line of 2015 WRX parts, includes the signature Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:26:12+08:00","created_at":"2018-01-24T23:26:12+08:00","vendor":"Mishimoto","type":"Cooling Hoses","tags":["2010","2011","2012","2013","2014","2015","2016","2017","2018","cooling","cooling-hoses","forester-sj5-applied-a-2012-2014-na-fb20-h4","forester-sj5-applied-b-2014-2014-na-fb20-h4","forester-sj5-applied-c-2014-2018-na-fb20-h4","forester-sjg-applied-a-2012-2014-na-fb20-h4","forester-sjg-applied-a-2012-2014-tc-fb20-h4","forester-sjg-applied-b-2014-2014-na-fb20-h4","forester-sjg-applied-b-2014-2014-tc-fb20-h4","forester-sjg-applied-c-2014-2015-na-fb20-h4","forester-sjg-applied-c-2014-2015-tc-fb20-h4","forester-sjg-applied-d-2015-2018-na-fb20-h4","forester-sjg-applied-d-2015-2018-tc-fb20-h4","mishimoto","radiator-hose-kits","subaru","us1","wrx-s4-vag-applied-a-2014-2015-tc-fa20f-h4","wrx-s4-vag-applied-b-2015-2016-tc-fa20f-h4","wrx-s4-vag-applied-c-2016-2018-tc-fa20f-h4","ws136"],"price":17920,"price_min":17920,"price_max":17920,"available":true,"price_varies":false,"compare_at_price":28000,"compare_at_price_min":28000,"compare_at_price_max":28000,"compare_at_price_varies":false,"variants":[{"id":5990396657691,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-WRX-15BL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX Silicone Radiator Hose Kit - Blue - VAG SJ5 SJG - MMHOSE-WRX-15BL","public_title":null,"options":["Default Title"],"price":17920,"weight":4771,"compare_at_price":28000,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-15BL.jpg?v=1710154147"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-15BL.jpg?v=1710154147","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX Silicone Radiator Hose Kit - Blue - VAG SJ5 SJG - MMHOSE-WRX-15BL - Rzcrewgarage","id":1351403831393,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-15BL.jpg?v=1710154147"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-15BL.jpg?v=1710154147","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-WRX-15BL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2015+ Subaru WRX\u003cbr\u003eConstructed from four layers of silicone with heat-resistant embedded fibers\u003cbr\u003eImproves heat and pressure tolerance\u003cbr\u003eIncludes high-quality worm-gear clamps for ease of installation\u003cbr\u003eIncludes upper radiator hose, lower radiator hose, and coolant overflow hose\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Silicone Hoses\u003cbr\u003e(4) Worm-Gear Clamps\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eAlso Fits 2015+ Subaru WRX, 2014+ Subaru Forester XT\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 0.55\" \u003cbr\u003eHose 2: 1.89\" \u003cbr\u003eHose 3: 1.89\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 0.28\" \u003cbr\u003eHose 2: 1.54\" \u003cbr\u003eHose 3: 1.54\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eRubber is out, silicone is in! Upgrade your stock 2015 WRX radiator hoses with the Mishimoto Silicone Radiator Hose Kit to provide your 2015 WRX with an advancement in both style and reliability. This 2015 WRX kit includes the upper radiator hose, lower radiator hose, overflow port hose, as well as four worm-gear clamps to make these 2015 WRX parts easy to install. Unlike the degradation-prone stock rubber hoses, the Mishimoto 2015 WRX hoses are constructed from four layers of silicone with heat-resistant embedded fibers to provide unmatched durability, heat tolerance, and pressure tolerance. Whether you are entering your 2015 WRX in the local rallycross, or lapping at your next track day, trust Mishimoto and our line of 2015 WRX parts to keep your WRX cool. This 2015 WRX hose kit is available in black, blue, or red and, like our entire line of 2015 WRX parts, includes the signature Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2015+ Subaru WRX\u003cbr\u003eConstructed from four layers of silicone with heat-resistant embedded fibers\u003cbr\u003eImproves heat and pressure tolerance\u003cbr\u003eIncludes high-quality worm-gear clamps for ease of installation\u003cbr\u003eIncludes upper radiator hose, lower radiator hose, and coolant overflow hose\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Silicone Hoses\u003cbr\u003e(4) Worm-Gear Clamps\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eAlso Fits 2015+ Subaru WRX, 2014+ Subaru Forester XT\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 0.55\" \u003cbr\u003eHose 2: 1.89\" \u003cbr\u003eHose 3: 1.89\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 0.28\" \u003cbr\u003eHose 2: 1.54\" \u003cbr\u003eHose 3: 1.54\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eRubber is out, silicone is in! Upgrade your stock 2015 WRX radiator hoses with the Mishimoto Silicone Radiator Hose Kit to provide your 2015 WRX with an advancement in both style and reliability. This 2015 WRX kit includes the upper radiator hose, lower radiator hose, overflow port hose, as well as four worm-gear clamps to make these 2015 WRX parts easy to install. Unlike the degradation-prone stock rubber hoses, the Mishimoto 2015 WRX hoses are constructed from four layers of silicone with heat-resistant embedded fibers to provide unmatched durability, heat tolerance, and pressure tolerance. Whether you are entering your 2015 WRX in the local rallycross, or lapping at your next track day, trust Mishimoto and our line of 2015 WRX parts to keep your WRX cool. This 2015 WRX hose kit is available in black, blue, or red and, like our entire line of 2015 WRX parts, includes the signature Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561997512731,"title":"Mishimoto - Subaru WRX Silicone Radiator Hose Kit - Red - VAG SJ5 SJG - MMHOSE-WRX-15RD","handle":"mishimoto-subaru-wrx-silicone-radiator-hose-kit-red-vag-sj5-sjg-mmhose-wrx-15rd","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-WRX-15RD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2015+ Subaru WRX\u003cbr\u003eConstructed from four layers of silicone with heat-resistant embedded fibers\u003cbr\u003eImproves heat and pressure tolerance\u003cbr\u003eIncludes high-quality worm-gear clamps for ease of installation\u003cbr\u003eIncludes upper radiator hose, lower radiator hose, and coolant overflow hose\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Silicone Hoses\u003cbr\u003e(4) Worm-Gear Clamps\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eAlso Fits 2015+ Subaru WRX, 2014+ Subaru Forester XT\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 0.55\" \u003cbr\u003eHose 2: 1.89\" \u003cbr\u003eHose 3: 1.89\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 0.28\" \u003cbr\u003eHose 2: 1.54\" \u003cbr\u003eHose 3: 1.54\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eRubber is out, silicone is in! Upgrade your stock 2015 WRX radiator hoses with the Mishimoto Silicone Radiator Hose Kit to provide your 2015 WRX with an advancement in both style and reliability. This 2015 WRX kit includes the upper radiator hose, lower radiator hose, overflow port hose, as well as four worm-gear clamps to make these 2015 WRX parts easy to install. Unlike the degradation-prone stock rubber hoses, the Mishimoto 2015 WRX hoses are constructed from four layers of silicone with heat-resistant embedded fibers to provide unmatched durability, heat tolerance, and pressure tolerance. Whether you are entering your 2015 WRX in the local rallycross, or lapping at your next track day, trust Mishimoto and our line of 2015 WRX parts to keep your WRX cool. This 2015 WRX hose kit is available in black, blue, or red and, like our entire line of 2015 WRX parts, includes the signature Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2015+ Subaru WRX\u003cbr\u003eConstructed from four layers of silicone with heat-resistant embedded fibers\u003cbr\u003eImproves heat and pressure tolerance\u003cbr\u003eIncludes high-quality worm-gear clamps for ease of installation\u003cbr\u003eIncludes upper radiator hose, lower radiator hose, and coolant overflow hose\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Silicone Hoses\u003cbr\u003e(4) Worm-Gear Clamps\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eAlso Fits 2015+ Subaru WRX, 2014+ Subaru Forester XT\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 0.55\" \u003cbr\u003eHose 2: 1.89\" \u003cbr\u003eHose 3: 1.89\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 0.28\" \u003cbr\u003eHose 2: 1.54\" \u003cbr\u003eHose 3: 1.54\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eRubber is out, silicone is in! Upgrade your stock 2015 WRX radiator hoses with the Mishimoto Silicone Radiator Hose Kit to provide your 2015 WRX with an advancement in both style and reliability. This 2015 WRX kit includes the upper radiator hose, lower radiator hose, overflow port hose, as well as four worm-gear clamps to make these 2015 WRX parts easy to install. Unlike the degradation-prone stock rubber hoses, the Mishimoto 2015 WRX hoses are constructed from four layers of silicone with heat-resistant embedded fibers to provide unmatched durability, heat tolerance, and pressure tolerance. Whether you are entering your 2015 WRX in the local rallycross, or lapping at your next track day, trust Mishimoto and our line of 2015 WRX parts to keep your WRX cool. This 2015 WRX hose kit is available in black, blue, or red and, like our entire line of 2015 WRX parts, includes the signature Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:26:13+08:00","created_at":"2018-01-24T23:26:14+08:00","vendor":"Mishimoto","type":"Cooling Hoses","tags":["2010","2011","2012","2013","2014","2015","2016","2017","2018","cooling","cooling-hoses","forester-sj5-applied-a-2012-2014-na-fb20-h4","forester-sj5-applied-b-2014-2014-na-fb20-h4","forester-sj5-applied-c-2014-2018-na-fb20-h4","forester-sjg-applied-a-2012-2014-na-fb20-h4","forester-sjg-applied-a-2012-2014-tc-fb20-h4","forester-sjg-applied-b-2014-2014-na-fb20-h4","forester-sjg-applied-b-2014-2014-tc-fb20-h4","forester-sjg-applied-c-2014-2015-na-fb20-h4","forester-sjg-applied-c-2014-2015-tc-fb20-h4","forester-sjg-applied-d-2015-2018-na-fb20-h4","forester-sjg-applied-d-2015-2018-tc-fb20-h4","mishimoto","radiator-hose-kits","subaru","us1","wrx-s4-vag-applied-a-2014-2015-tc-fa20f-h4","wrx-s4-vag-applied-b-2015-2016-tc-fa20f-h4","wrx-s4-vag-applied-c-2016-2018-tc-fa20f-h4","ws136"],"price":17920,"price_min":17920,"price_max":17920,"available":true,"price_varies":false,"compare_at_price":28000,"compare_at_price_min":28000,"compare_at_price_max":28000,"compare_at_price_varies":false,"variants":[{"id":5990396755995,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-WRX-15RD","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX Silicone Radiator Hose Kit - Red - VAG SJ5 SJG - MMHOSE-WRX-15RD","public_title":null,"options":["Default Title"],"price":17920,"weight":4771,"compare_at_price":28000,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-15RD.jpg?v=1710154149"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-15RD.jpg?v=1710154149","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX Silicone Radiator Hose Kit - Red - VAG SJ5 SJG - MMHOSE-WRX-15RD - Rzcrewgarage","id":1351403864161,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-15RD.jpg?v=1710154149"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-WRX-15RD.jpg?v=1710154149","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-WRX-15RD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2015+ Subaru WRX\u003cbr\u003eConstructed from four layers of silicone with heat-resistant embedded fibers\u003cbr\u003eImproves heat and pressure tolerance\u003cbr\u003eIncludes high-quality worm-gear clamps for ease of installation\u003cbr\u003eIncludes upper radiator hose, lower radiator hose, and coolant overflow hose\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Silicone Hoses\u003cbr\u003e(4) Worm-Gear Clamps\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eAlso Fits 2015+ Subaru WRX, 2014+ Subaru Forester XT\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 0.55\" \u003cbr\u003eHose 2: 1.89\" \u003cbr\u003eHose 3: 1.89\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 0.28\" \u003cbr\u003eHose 2: 1.54\" \u003cbr\u003eHose 3: 1.54\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eRubber is out, silicone is in! Upgrade your stock 2015 WRX radiator hoses with the Mishimoto Silicone Radiator Hose Kit to provide your 2015 WRX with an advancement in both style and reliability. This 2015 WRX kit includes the upper radiator hose, lower radiator hose, overflow port hose, as well as four worm-gear clamps to make these 2015 WRX parts easy to install. Unlike the degradation-prone stock rubber hoses, the Mishimoto 2015 WRX hoses are constructed from four layers of silicone with heat-resistant embedded fibers to provide unmatched durability, heat tolerance, and pressure tolerance. Whether you are entering your 2015 WRX in the local rallycross, or lapping at your next track day, trust Mishimoto and our line of 2015 WRX parts to keep your WRX cool. This 2015 WRX hose kit is available in black, blue, or red and, like our entire line of 2015 WRX parts, includes the signature Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2015+ Subaru WRX\u003cbr\u003eConstructed from four layers of silicone with heat-resistant embedded fibers\u003cbr\u003eImproves heat and pressure tolerance\u003cbr\u003eIncludes high-quality worm-gear clamps for ease of installation\u003cbr\u003eIncludes upper radiator hose, lower radiator hose, and coolant overflow hose\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Silicone Hoses\u003cbr\u003e(4) Worm-Gear Clamps\u003cbr\u003e\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eAlso Fits 2015+ Subaru WRX, 2014+ Subaru Forester XT\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 0.55\" \u003cbr\u003eHose 2: 1.89\" \u003cbr\u003eHose 3: 1.89\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 0.28\" \u003cbr\u003eHose 2: 1.54\" \u003cbr\u003eHose 3: 1.54\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eRubber is out, silicone is in! Upgrade your stock 2015 WRX radiator hoses with the Mishimoto Silicone Radiator Hose Kit to provide your 2015 WRX with an advancement in both style and reliability. This 2015 WRX kit includes the upper radiator hose, lower radiator hose, overflow port hose, as well as four worm-gear clamps to make these 2015 WRX parts easy to install. Unlike the degradation-prone stock rubber hoses, the Mishimoto 2015 WRX hoses are constructed from four layers of silicone with heat-resistant embedded fibers to provide unmatched durability, heat tolerance, and pressure tolerance. Whether you are entering your 2015 WRX in the local rallycross, or lapping at your next track day, trust Mishimoto and our line of 2015 WRX parts to keep your WRX cool. This 2015 WRX hose kit is available in black, blue, or red and, like our entire line of 2015 WRX parts, includes the signature Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561987747867,"title":"Mishimoto - Subaru WRX Thermostatic Oil Cooler Kit - Black - VAG - MMOC-WRX-15TBK","handle":"mishimoto-subaru-wrx-thermostatic-oil-cooler-kit-black-vag-mmoc-wrx-15tbk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-15TBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX\u003cbr\u003eProven 20+°F (11.1+°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined aluminum spacer for the oil sandwich plate\u003cbr\u003eSilicone hose bypasses stock liquid-to-liquid heat exchanger\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 25°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets\u003cbr\u003e(1) Application-Specific Oil Sandwich Plate\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings \u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20 x M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Large O-Ring\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is expanding their line of 2015 WRX parts! High oil temperatures can wreak havoc on your high-performance 2015 WRX FA20 DIT. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2015+ Subaru WRX. The 2015 WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock 2015 WRX liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit is designed to work in conjunction with the stock liquid-to-liquid to maintain optimal oil temperature. Properly regulated oil temperatures becomes even more important if you have modified your vehicle or spend time tracking your 2015 WRX. Mishimoto's direct-fit 2015 WRX oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific CNC-machined aluminum sandwich plate has been designed to allow proper clearance of the stock oil filter. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your 2015 WRX can achieve a +25°F (+13.9°C) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our 2015 WRX parts, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX\u003cbr\u003eProven 20+°F (11.1+°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined aluminum spacer for the oil sandwich plate\u003cbr\u003eSilicone hose bypasses stock liquid-to-liquid heat exchanger\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 25°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets\u003cbr\u003e(1) Application-Specific Oil Sandwich Plate\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings \u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20 x M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Large O-Ring\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is expanding their line of 2015 WRX parts! High oil temperatures can wreak havoc on your high-performance 2015 WRX FA20 DIT. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2015+ Subaru WRX. The 2015 WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock 2015 WRX liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit is designed to work in conjunction with the stock liquid-to-liquid to maintain optimal oil temperature. Properly regulated oil temperatures becomes even more important if you have modified your vehicle or spend time tracking your 2015 WRX. Mishimoto's direct-fit 2015 WRX oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific CNC-machined aluminum sandwich plate has been designed to allow proper clearance of the stock oil filter. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your 2015 WRX can achieve a +25°F (+13.9°C) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our 2015 WRX parts, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:26+08:00","created_at":"2018-01-24T23:24:27+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2014","2015","2016","2017","2018","car-specific","cooling","mishimoto","oil-cooler-kits","oil-coolers","subaru","us1","wrx-s4-vag-applied-a-2014-2015-tc-fa20f-h4","wrx-s4-vag-applied-b-2015-2016-tc-fa20f-h4","wrx-s4-vag-applied-c-2016-2018-tc-fa20f-h4","ws110"],"price":109620,"price_min":109620,"price_max":109620,"available":true,"price_varies":false,"compare_at_price":121800,"compare_at_price_min":121800,"compare_at_price_max":121800,"compare_at_price_varies":false,"variants":[{"id":5990384500763,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-WRX-15TBK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX Thermostatic Oil Cooler Kit - Black - VAG - MMOC-WRX-15TBK","public_title":null,"options":["Default Title"],"price":109620,"weight":9488,"compare_at_price":121800,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-15TBK.jpg?v=1710154082"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-15TBK.jpg?v=1710154082","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX Thermostatic Oil Cooler Kit - Black - VAG - MMOC-WRX-15TBK - Rzcrewgarage","id":1351400357985,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-15TBK.jpg?v=1710154082"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-15TBK.jpg?v=1710154082","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-15TBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX\u003cbr\u003eProven 20+°F (11.1+°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined aluminum spacer for the oil sandwich plate\u003cbr\u003eSilicone hose bypasses stock liquid-to-liquid heat exchanger\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 25°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets\u003cbr\u003e(1) Application-Specific Oil Sandwich Plate\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings \u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20 x M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Large O-Ring\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is expanding their line of 2015 WRX parts! High oil temperatures can wreak havoc on your high-performance 2015 WRX FA20 DIT. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2015+ Subaru WRX. The 2015 WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock 2015 WRX liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit is designed to work in conjunction with the stock liquid-to-liquid to maintain optimal oil temperature. Properly regulated oil temperatures becomes even more important if you have modified your vehicle or spend time tracking your 2015 WRX. Mishimoto's direct-fit 2015 WRX oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific CNC-machined aluminum sandwich plate has been designed to allow proper clearance of the stock oil filter. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your 2015 WRX can achieve a +25°F (+13.9°C) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our 2015 WRX parts, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX\u003cbr\u003eProven 20+°F (11.1+°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined aluminum spacer for the oil sandwich plate\u003cbr\u003eSilicone hose bypasses stock liquid-to-liquid heat exchanger\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 25°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets\u003cbr\u003e(1) Application-Specific Oil Sandwich Plate\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings \u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20 x M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Large O-Ring\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is expanding their line of 2015 WRX parts! High oil temperatures can wreak havoc on your high-performance 2015 WRX FA20 DIT. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2015+ Subaru WRX. The 2015 WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock 2015 WRX liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit is designed to work in conjunction with the stock liquid-to-liquid to maintain optimal oil temperature. Properly regulated oil temperatures becomes even more important if you have modified your vehicle or spend time tracking your 2015 WRX. Mishimoto's direct-fit 2015 WRX oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific CNC-machined aluminum sandwich plate has been designed to allow proper clearance of the stock oil filter. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your 2015 WRX can achieve a +25°F (+13.9°C) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our 2015 WRX parts, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561987715099,"title":"Mishimoto - Subaru WRX Thermostatic Oil Cooler Kit - VAG - MMOC-WRX-15T","handle":"mishimoto-subaru-wrx-thermostatic-oil-cooler-kit-vag-mmoc-wrx-15t","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-15T\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX\u003cbr\u003eProven 20+°F (11.1+°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined aluminum spacer for the oil sandwich plate\u003cbr\u003eSilicone hose bypasses stock liquid-to-liquid heat exchanger\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 25°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets\u003cbr\u003e(1) Application-Specific Oil Sandwich Plate\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings \u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20 x M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Large O-Ring\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is expanding their line of 2015 WRX parts! High oil temperatures can wreak havoc on your high-performance 2015 WRX FA20 DIT. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2015+ Subaru WRX. The 2015 WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock 2015 WRX liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit is designed to work in conjunction with the stock liquid-to-liquid to maintain optimal oil temperature. Properly regulated oil temperatures becomes even more important if you have modified your vehicle or spend time tracking your 2015 WRX. Mishimoto's direct-fit 2015 WRX oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific CNC-machined aluminum sandwich plate has been designed to allow proper clearance of the stock oil filter. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your 2015 WRX can achieve a +25°F (+13.9°C) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our 2015 WRX parts, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX\u003cbr\u003eProven 20+°F (11.1+°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined aluminum spacer for the oil sandwich plate\u003cbr\u003eSilicone hose bypasses stock liquid-to-liquid heat exchanger\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 25°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets\u003cbr\u003e(1) Application-Specific Oil Sandwich Plate\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings \u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20 x M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Large O-Ring\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is expanding their line of 2015 WRX parts! High oil temperatures can wreak havoc on your high-performance 2015 WRX FA20 DIT. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2015+ Subaru WRX. The 2015 WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock 2015 WRX liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit is designed to work in conjunction with the stock liquid-to-liquid to maintain optimal oil temperature. Properly regulated oil temperatures becomes even more important if you have modified your vehicle or spend time tracking your 2015 WRX. Mishimoto's direct-fit 2015 WRX oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific CNC-machined aluminum sandwich plate has been designed to allow proper clearance of the stock oil filter. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your 2015 WRX can achieve a +25°F (+13.9°C) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our 2015 WRX parts, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:25+08:00","created_at":"2018-01-24T23:24:26+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2014","2015","2016","2017","2018","car-specific","cooling","mishimoto","oil-cooler-kits","oil-coolers","subaru","us1","wrx-s4-vag-applied-a-2014-2015-tc-fa20f-h4","wrx-s4-vag-applied-b-2015-2016-tc-fa20f-h4","wrx-s4-vag-applied-c-2016-2018-tc-fa20f-h4","ws110"],"price":109620,"price_min":109620,"price_max":109620,"available":true,"price_varies":false,"compare_at_price":121800,"compare_at_price_min":121800,"compare_at_price_max":121800,"compare_at_price_varies":false,"variants":[{"id":5990384467995,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-WRX-15T","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX Thermostatic Oil Cooler Kit - VAG - MMOC-WRX-15T","public_title":null,"options":["Default Title"],"price":109620,"weight":9488,"compare_at_price":121800,"inventory_quantity":16,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-15T.jpg?v=1710154082"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-15T.jpg?v=1710154082","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX Thermostatic Oil Cooler Kit - VAG - MMOC-WRX-15T - Rzcrewgarage","id":1351400325217,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-15T.jpg?v=1710154082"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-15T.jpg?v=1710154082","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-15T\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX\u003cbr\u003eProven 20+°F (11.1+°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined aluminum spacer for the oil sandwich plate\u003cbr\u003eSilicone hose bypasses stock liquid-to-liquid heat exchanger\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 25°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets\u003cbr\u003e(1) Application-Specific Oil Sandwich Plate\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings \u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20 x M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Large O-Ring\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is expanding their line of 2015 WRX parts! High oil temperatures can wreak havoc on your high-performance 2015 WRX FA20 DIT. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2015+ Subaru WRX. The 2015 WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock 2015 WRX liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit is designed to work in conjunction with the stock liquid-to-liquid to maintain optimal oil temperature. Properly regulated oil temperatures becomes even more important if you have modified your vehicle or spend time tracking your 2015 WRX. Mishimoto's direct-fit 2015 WRX oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific CNC-machined aluminum sandwich plate has been designed to allow proper clearance of the stock oil filter. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your 2015 WRX can achieve a +25°F (+13.9°C) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our 2015 WRX parts, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2015+ Subaru WRX\u003cbr\u003eProven 20+°F (11.1+°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation\u003cbr\u003eBillet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined aluminum spacer for the oil sandwich plate\u003cbr\u003eSilicone hose bypasses stock liquid-to-liquid heat exchanger\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes FA20DIT\u003cbr\u003eChassis Codes VA\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.75 qt\u003cbr\u003eTemp Difference 25°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Application-Specific Mounting Brackets\u003cbr\u003e(1) Application-Specific Oil Sandwich Plate\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ 45° and 90° -10AN Fittings \u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20 x M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Large O-Ring\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto is expanding their line of 2015 WRX parts! High oil temperatures can wreak havoc on your high-performance 2015 WRX FA20 DIT. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2015+ Subaru WRX. The 2015 WRX has tons to offer with its turbocharged engine and fantastic AWD system, but the stock 2015 WRX liquid-to-liquid oil cooler cannot handle prolonged aggressive driving conditions. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit is designed to work in conjunction with the stock liquid-to-liquid to maintain optimal oil temperature. Properly regulated oil temperatures becomes even more important if you have modified your vehicle or spend time tracking your 2015 WRX. Mishimoto's direct-fit 2015 WRX oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included application-specific CNC-machined aluminum sandwich plate has been designed to allow proper clearance of the stock oil filter. \u003cbr\u003e\u003cbr\u003eThis 2015 WRX kit includes preassembled stainless steel lines with -10AN fittings to help direct the oil to and from the cooler. With this setup, your 2015 WRX can achieve a +25°F (+13.9°C) drop in oil temperatures with minimal pressure loss. The Mishimoto Subaru WRX Oil Cooler Kit is available with either a Sleek Silver or Stealth Black oil cooler. As with all our 2015 WRX parts, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":6116594614454,"title":"Mishimoto Street Performance Top-Mount Intercooler - Subaru - WRX S4 VAG APPLIED A to C","handle":"mishimoto-street-performance-top-mount-intercooler-subaru-wrx-s4-vag-applied-a-to-c-vag-applied-a-to-c-mmtmic-wrx-15xsl","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003eReference Number: MMTMIC-WRX-15XSL\u003cbr\u003e\u003cbr\u003eThese days it's almost more uncommon to find a 2015-2017 Subaru WRX owner that isn't looking to push more boost through their FA20DIT and give their morning commute a little more zest. With more boost comes the stock intercooler unit quickly gets in over its head. Mishimoto has the perfect intercooling solution with the Mishimoto 2015-2017 Subaru WRX Street Performance Top-Mount Intercooler. The Mishimoto Street Performance Intercooler takes the place of the stock unit and is specifically designed for use on the stock tune up to stage 2 maps and tunes. Our intercooler features fully cast aluminum end tanks TIG-welded to a robust bar-and-plate core designed for maximum cooling and minimal pressure drop. The new design boasts a 76% increase in core volume and 81% bump in external fin surface area equating to a 34F drop in outlet temperatures over the stock unit. The 12% increase in flow is another reason why this intercooler the perfect addition to your tuned WRX This intercooler available in black, silver or gold with the optional add on of the Mishimoto ducting for increased airflow. Like all of our products, the Mishimoto 2015-2017 Subaru WRX Street Performance Top-Mount Intercooler includes the Mishimoto Lifetime Warranty for a worry free installation. \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eWRX S4 | VAG APPLIED A | 2014-2015 | TC | FA20F | H4,WRX S4 | VAG APPLIED B | 2015-2016 | TC | FA20F | H4,WRX S4 | VAG APPLIED C | 2016-2018 | TC | FA20F | H4\u003c!--split--\u003e","published_at":"2020-12-01T14:14:29+08:00","created_at":"2020-12-01T14:14:30+08:00","vendor":"Mishimoto","type":"Intercooler Kits","tags":["2014","2015","2016","2017","2018","forced-induction","intercooler-kits","mishimoto","new","subaru","us1","wrx-s4-vag-applied-a-2014-2015-tc-fa20f-h4","wrx-s4-vag-applied-b-2015-2016-tc-fa20f-h4","wrx-s4-vag-applied-c-2016-2018-tc-fa20f-h4","ws118"],"price":82000,"price_min":82000,"price_max":82000,"available":true,"price_varies":false,"compare_at_price":100000,"compare_at_price_min":100000,"compare_at_price_max":100000,"compare_at_price_varies":false,"variants":[{"id":37644136644790,"title":"Silver","option1":"Silver","option2":null,"option3":null,"sku":"MMTMIC-WRX-15XSL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto Street Performance Top-Mount Intercooler - Subaru - WRX S4 VAG APPLIED A to C - Silver","public_title":"Silver","options":["Silver"],"price":82000,"weight":14251,"compare_at_price":100000,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":37644136677558,"title":"Gold","option1":"Gold","option2":null,"option3":null,"sku":"MMTMIC-WRX-15XGD","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto Street Performance Top-Mount Intercooler - Subaru - WRX S4 VAG APPLIED A to C - Gold","public_title":"Gold","options":["Gold"],"price":82000,"weight":14251,"compare_at_price":100000,"inventory_quantity":17,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":37644136710326,"title":"Black","option1":"Black","option2":null,"option3":null,"sku":"MMTMIC-WRX-15XBK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto Street Performance Top-Mount Intercooler - Subaru - WRX S4 VAG APPLIED A to C - Black","public_title":"Black","options":["Black"],"price":82000,"weight":14297,"compare_at_price":100000,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMTMIC-WRX-15X.png?v=1710195054"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMTMIC-WRX-15X.png?v=1710195054","options":["Colour"],"media":[{"alt":"Mishimoto Street Performance Top-Mount Intercooler - Subaru - WRX S4 VAG APPLIED A to C","id":24718878736566,"position":1,"preview_image":{"aspect_ratio":1.0,"height":700,"width":700,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMTMIC-WRX-15X.png?v=1710195054"},"aspect_ratio":1.0,"height":700,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMTMIC-WRX-15X.png?v=1710195054","width":700}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003eReference Number: MMTMIC-WRX-15XSL\u003cbr\u003e\u003cbr\u003eThese days it's almost more uncommon to find a 2015-2017 Subaru WRX owner that isn't looking to push more boost through their FA20DIT and give their morning commute a little more zest. With more boost comes the stock intercooler unit quickly gets in over its head. Mishimoto has the perfect intercooling solution with the Mishimoto 2015-2017 Subaru WRX Street Performance Top-Mount Intercooler. The Mishimoto Street Performance Intercooler takes the place of the stock unit and is specifically designed for use on the stock tune up to stage 2 maps and tunes. Our intercooler features fully cast aluminum end tanks TIG-welded to a robust bar-and-plate core designed for maximum cooling and minimal pressure drop. The new design boasts a 76% increase in core volume and 81% bump in external fin surface area equating to a 34F drop in outlet temperatures over the stock unit. The 12% increase in flow is another reason why this intercooler the perfect addition to your tuned WRX This intercooler available in black, silver or gold with the optional add on of the Mishimoto ducting for increased airflow. Like all of our products, the Mishimoto 2015-2017 Subaru WRX Street Performance Top-Mount Intercooler includes the Mishimoto Lifetime Warranty for a worry free installation. \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eWRX S4 | VAG APPLIED A | 2014-2015 | TC | FA20F | H4,WRX S4 | VAG APPLIED B | 2015-2016 | TC | FA20F | H4,WRX S4 | VAG APPLIED C | 2016-2018 | TC | FA20F | H4\u003c!--split--\u003e"}

{"id":380374253595,"title":"Okada projects Plasma Direct ignition coils kit - Subaru WRX S4 2000cc FA20 turbo, VAG (H 26.8 -)","handle":"okada-projects-plasma-direct-ignition-coils-kit-subaru-wrx-s4-2000cc-fa20-turbo-vag-h-26-8-sd244101r","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Okada Projects\u003cbr\u003ePart Number: SD244101R\u003cbr\u003eIgnition Type: Direct Ignition Coils\u003cbr\u003e\u003cbr\u003eThe Plasma Directs produce 4 times more spark energy than stock coils and also generate an ultra fast multi spark discharge of 10 sparks up to highest RPM. The spark amperage is increased 100%, allowing the spark to reach many more molecules and therefore accelerate the ignition and combustion process. This is extremely important in forced induction applications but also improves the performance of normally aspirated engines. The Plasma Direct will increase horsepower and torque throughout the entire rpm range. This upgrade will also reduce fuel consumption. Even the engines with a legendary smoothness will be further refined with the Plasma Direct upgrade. Installation is easy. Direct bolt-in to the engine, no splicing or cutting into stock wiring, simply replace the stock coils with our Plasma Direct Coils and ready to go!\u003cbr\u003eProduct Picture may differs.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eWRX S4 | VAG APPLIED A | 2014-2015 | TC | FA20F | H4\u003cbr\u003eWRX S4 | VAG APPLIED B | 2015-2016 | TC | FA20F | H4\u003cbr\u003eWRX S4 | VAG APPLIED C | 2016-2018 | TC | FA20F | H4\u003c!--split--\u003e","published_at":"2017-11-28T18:41:51+08:00","created_at":"2017-11-28T18:41:51+08:00","vendor":"Okada Projects","type":"Ignition Coils Booster and Cables","tags":["2014","2015","2016","2017","2018","direct-ignition-coils","ignition-coils-booster-and-cables","jp1","okada-projects","subaru","VAG APPLIED A to C","wrx-s4-vag-applied-a-2014-2015-tc-fa20f-h4","wrx-s4-vag-applied-b-2015-2016-tc-fa20f-h4","wrx-s4-vag-applied-c-2016-2018-tc-fa20f-h4","ws16"],"price":87608,"price_min":87608,"price_max":87608,"available":true,"price_varies":false,"compare_at_price":93200,"compare_at_price_min":93200,"compare_at_price_max":93200,"compare_at_price_varies":false,"variants":[{"id":4851977781275,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SD244101R","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Okada projects Plasma Direct ignition coils kit - Subaru WRX S4 2000cc FA20 turbo, VAG (H 26.8 -)","public_title":null,"options":["Default Title"],"price":87608,"weight":2200,"compare_at_price":93200,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Subaru_Drirect_coil_a74996a5-a20f-4166-8a84-775b9c206a81.jpg?v=1710145878"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Subaru_Drirect_coil_a74996a5-a20f-4166-8a84-775b9c206a81.jpg?v=1710145878","options":["Title"],"media":[{"alt":"Okada projects Plasma Direct ignition coils kit - Subaru WRX S4 2000cc FA20 turbo, VAG (H 26.8 -) - SD244101R","id":25432668438710,"position":1,"preview_image":{"aspect_ratio":1.509,"height":795,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Subaru_Drirect_coil_a74996a5-a20f-4166-8a84-775b9c206a81.jpg?v=1710145878"},"aspect_ratio":1.509,"height":795,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Subaru_Drirect_coil_a74996a5-a20f-4166-8a84-775b9c206a81.jpg?v=1710145878","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Okada Projects\u003cbr\u003ePart Number: SD244101R\u003cbr\u003eIgnition Type: Direct Ignition Coils\u003cbr\u003e\u003cbr\u003eThe Plasma Directs produce 4 times more spark energy than stock coils and also generate an ultra fast multi spark discharge of 10 sparks up to highest RPM. The spark amperage is increased 100%, allowing the spark to reach many more molecules and therefore accelerate the ignition and combustion process. This is extremely important in forced induction applications but also improves the performance of normally aspirated engines. The Plasma Direct will increase horsepower and torque throughout the entire rpm range. This upgrade will also reduce fuel consumption. Even the engines with a legendary smoothness will be further refined with the Plasma Direct upgrade. Installation is easy. Direct bolt-in to the engine, no splicing or cutting into stock wiring, simply replace the stock coils with our Plasma Direct Coils and ready to go!\u003cbr\u003eProduct Picture may differs.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eWRX S4 | VAG APPLIED A | 2014-2015 | TC | FA20F | H4\u003cbr\u003eWRX S4 | VAG APPLIED B | 2015-2016 | TC | FA20F | H4\u003cbr\u003eWRX S4 | VAG APPLIED C | 2016-2018 | TC | FA20F | H4\u003c!--split--\u003e"}

{"id":403045613595,"title":"Okuyama Carbing - Front Type I Strut Bar (Aluminium) - Subaru WRX S4 VAG APPLIED A to C","handle":"okuyama-carbing-front-type-i-strut-bar-aluminium-subaru-wrx-s4-vag-applied-a-to-c-621-525-0","description":"Ugrade your handling and reinforced your Chassis with this Okuyama Carbing - Front Type I Strut Bar (Aluminium) - Subaru WRX S4 VAG APPLIED A to C. Expect the best quality from Okuyama Carbing.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003eWRX S4 | VAG APPLIED A | 2014-2015 | TC | FA20F | H4,WRX S4 | VAG APPLIED B | 2015-2016 | TC | FA20F | H4,WRX S4 | VAG APPLIED C | 2016-2018 | TC | FA20F | H4","published_at":"2017-12-04T22:12:15+08:00","created_at":"2017-12-04T22:12:15+08:00","vendor":"Okuyama Carbing","type":"Bars and Braces","tags":["2-points","2014","2015","2016","2017","2018","aluminium","bars-and-braces","jp1","okuyama-carbing","okuyama-carbing24","strut-bars","subaru","wrx-s4-vag-applied-a-2014-2015-tc-fa20f-h4","wrx-s4-vag-applied-b-2015-2016-tc-fa20f-h4","wrx-s4-vag-applied-c-2016-2018-tc-fa20f-h4","ws112"],"price":37048,"price_min":37048,"price_max":37048,"available":true,"price_varies":false,"compare_at_price":42100,"compare_at_price_min":42100,"compare_at_price_max":42100,"compare_at_price_varies":false,"variants":[{"id":5013621538843,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"621 525 0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Okuyama Carbing - Front Type I Strut Bar (Aluminium) - Subaru WRX S4 VAG APPLIED A to C","public_title":null,"options":["Default Title"],"price":37048,"weight":9000,"compare_at_price":42100,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Type_1_Aluminium_aa692497-7f8e-4643-bb37-2238c96d6536.jpg?v=1710147450"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Type_1_Aluminium_aa692497-7f8e-4643-bb37-2238c96d6536.jpg?v=1710147450","options":["Title"],"media":[{"alt":"Okuyama Carbing - Front Type I Strut Bar (Aluminium) - Subaru WRX S4 VAG APPLIED A to C - 621 525 0","id":26109639426230,"position":1,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Type_1_Aluminium_aa692497-7f8e-4643-bb37-2238c96d6536.jpg?v=1710147450"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Type_1_Aluminium_aa692497-7f8e-4643-bb37-2238c96d6536.jpg?v=1710147450","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"Ugrade your handling and reinforced your Chassis with this Okuyama Carbing - Front Type I Strut Bar (Aluminium) - Subaru WRX S4 VAG APPLIED A to C. Expect the best quality from Okuyama Carbing.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003eWRX S4 | VAG APPLIED A | 2014-2015 | TC | FA20F | H4,WRX S4 | VAG APPLIED B | 2015-2016 | TC | FA20F | H4,WRX S4 | VAG APPLIED C | 2016-2018 | TC | FA20F | H4"}

{"id":403045580827,"title":"Okuyama Carbing - Front Type I Strut Bar (Steel) - Subaru WRX S4 VAG APPLIED A to C","handle":"okuyama-carbing-front-type-i-strut-bar-steel-subaru-wrx-s4-vag-applied-a-to-c-611-525-0","description":"Ugrade your handling and reinforced your Chassis with this Okuyama Carbing - Front Type I Strut Bar (Steel) - Subaru WRX S4 VAG APPLIED A to C. Expect the best quality from Okuyama Carbing.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003eWRX S4 | VAG APPLIED A | 2014-2015 | TC | FA20F | H4,WRX S4 | VAG APPLIED B | 2015-2016 | TC | FA20F | H4,WRX S4 | VAG APPLIED C | 2016-2018 | TC | FA20F | H4","published_at":"2017-12-04T22:12:15+08:00","created_at":"2017-12-04T22:12:15+08:00","vendor":"Okuyama Carbing","type":"Bars and Braces","tags":["2-points","2014","2015","2016","2017","2018","bars-and-braces","jp1","okuyama-carbing","okuyama-carbing24","steel","strut-bars","subaru","wrx-s4-vag-applied-a-2014-2015-tc-fa20f-h4","wrx-s4-vag-applied-b-2015-2016-tc-fa20f-h4","wrx-s4-vag-applied-c-2016-2018-tc-fa20f-h4","ws111"],"price":29370,"price_min":29370,"price_max":29370,"available":true,"price_varies":false,"compare_at_price":33000,"compare_at_price_min":33000,"compare_at_price_max":33000,"compare_at_price_varies":false,"variants":[{"id":5013621506075,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"611 525 0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Okuyama Carbing - Front Type I Strut Bar (Steel) - Subaru WRX S4 VAG APPLIED A to C","public_title":null,"options":["Default Title"],"price":29370,"weight":9000,"compare_at_price":33000,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Carbing_Type_1_Steel_583dbdbe-e5a7-472c-b7fb-ce60cc2f0556.jpg?v=1710147450"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Carbing_Type_1_Steel_583dbdbe-e5a7-472c-b7fb-ce60cc2f0556.jpg?v=1710147450","options":["Title"],"media":[{"alt":"Okuyama Carbing - Front Type I Strut Bar (Steel) - Subaru WRX S4 VAG APPLIED A to C - 611 525 0","id":26109639393462,"position":1,"preview_image":{"aspect_ratio":1.932,"height":414,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Carbing_Type_1_Steel_583dbdbe-e5a7-472c-b7fb-ce60cc2f0556.jpg?v=1710147450"},"aspect_ratio":1.932,"height":414,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Carbing_Type_1_Steel_583dbdbe-e5a7-472c-b7fb-ce60cc2f0556.jpg?v=1710147450","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"Ugrade your handling and reinforced your Chassis with this Okuyama Carbing - Front Type I Strut Bar (Steel) - Subaru WRX S4 VAG APPLIED A to C. Expect the best quality from Okuyama Carbing.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003eWRX S4 | VAG APPLIED A | 2014-2015 | TC | FA20F | H4,WRX S4 | VAG APPLIED B | 2015-2016 | TC | FA20F | H4,WRX S4 | VAG APPLIED C | 2016-2018 | TC | FA20F | H4"}

{"id":403045679131,"title":"Okuyama Carbing - Front Type I Strut Bar (Titanium) - Subaru WRX S4 VAG APPLIED A to C","handle":"okuyama-carbing-front-type-i-strut-bar-titanium-subaru-wrx-s4-vag-applied-a-to-c-618-525-1","description":"Ugrade your handling and reinforced your Chassis with this Okuyama Carbing - Front Type I Strut Bar (Titanium) - Subaru WRX S4 VAG APPLIED A to C. Expect the best quality from Okuyama Carbing.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003eWRX S4 | VAG APPLIED A | 2014-2015 | TC | FA20F | H4,WRX S4 | VAG APPLIED B | 2015-2016 | TC | FA20F | H4,WRX S4 | VAG APPLIED C | 2016-2018 | TC | FA20F | H4","published_at":"2017-12-04T22:12:15+08:00","created_at":"2017-12-04T22:12:16+08:00","vendor":"Okuyama Carbing","type":"Bars and Braces","tags":["2-points","2014","2015","2016","2017","2018","bars-and-braces","jp1","okuyama-carbing","okuyama-carbing24","strut-bars","subaru","titanium","wrx-s4-vag-applied-a-2014-2015-tc-fa20f-h4","wrx-s4-vag-applied-b-2015-2016-tc-fa20f-h4","wrx-s4-vag-applied-c-2016-2018-tc-fa20f-h4","ws113"],"price":86565,"price_min":86565,"price_max":86565,"available":true,"price_varies":false,"compare_at_price":99500,"compare_at_price_min":99500,"compare_at_price_max":99500,"compare_at_price_varies":false,"variants":[{"id":5013621604379,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"618 525 1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Okuyama Carbing - Front Type I Strut Bar (Titanium) - Subaru WRX S4 VAG APPLIED A to C","public_title":null,"options":["Default Title"],"price":86565,"weight":9000,"compare_at_price":99500,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Titanium_type_1_f42ef0ec-a86b-404f-8d97-a038fce29934.jpg?v=1710147452"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Titanium_type_1_f42ef0ec-a86b-404f-8d97-a038fce29934.jpg?v=1710147452","options":["Title"],"media":[{"alt":"Okuyama Carbing - Front Type I Strut Bar (Titanium) - Subaru WRX S4 VAG APPLIED A to C - 618 525 1","id":26109639458998,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Titanium_type_1_f42ef0ec-a86b-404f-8d97-a038fce29934.jpg?v=1710147452"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Titanium_type_1_f42ef0ec-a86b-404f-8d97-a038fce29934.jpg?v=1710147452","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"Ugrade your handling and reinforced your Chassis with this Okuyama Carbing - Front Type I Strut Bar (Titanium) - Subaru WRX S4 VAG APPLIED A to C. Expect the best quality from Okuyama Carbing.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003eWRX S4 | VAG APPLIED A | 2014-2015 | TC | FA20F | H4,WRX S4 | VAG APPLIED B | 2015-2016 | TC | FA20F | H4,WRX S4 | VAG APPLIED C | 2016-2018 | TC | FA20F | H4"}

{"id":6260686880950,"title":"Project Mu - B-Spec Front Brake Pads - Subaru WRX S4 VAG Applied A-D (2014-2021)","handle":"project-mu-b-spec-front-brake-pads-subaru-wrx-s4-vag-applied-a-d-2014-2021-f916_type_b-spec","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Project Mu\u003cbr\u003ePosition: Front\u003cbr\u003ePurpose: Street,Circuit\u003cbr\u003eMaterial: Super Graphite Metallic (Non-Asbestos)\u003cbr\u003eApplicable Rotor Temperature: 0~500C\u003cbr\u003eFriction Coefficient: 0.32~0.45\u003cbr\u003e\u003cbr\u003eThese brake pads have been designed for everyday use street sport applications. This specific compound was developed for fade resistance, improved braking with great cost performance.\u003cbr\u003e\u003cbr\u003eDisclaimer:\u003cbr\u003e\u003cbr\u003eProduct picture is generic. Actual Brake pad shape may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - WRX S4 - VAG Applied A (2014-2015) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied B (2015-2016) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied C (2016-2017) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied D (2017-2021) FA20\u003c!--split--\u003e","published_at":"2021-02-12T16:07:25+08:00","created_at":"2021-02-12T16:07:26+08:00","vendor":"Project Mu","type":"Brake Pads","tags":["2014","2015","2016","2017","2018","2019","2020","2021","brake-pads","circuit","front","jp1","project-mu","street","subaru","wrx-s4-vag-applied-a-2014-2015-tc-fa20f-h4","wrx-s4-vag-applied-b-2015-2016-tc-fa20f-h4","wrx-s4-vag-applied-c-2016-2018-tc-fa20f-h4","wrx-s4-vag-applied-d-2017-2021-tc-fa20f-h4","ws133"],"price":9849,"price_min":9849,"price_max":9849,"available":true,"price_varies":false,"compare_at_price":14700,"compare_at_price_min":14700,"compare_at_price_max":14700,"compare_at_price_varies":false,"variants":[{"id":38029831078070,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"F916_Type_B-Spec","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Project Mu - B-Spec Front Brake Pads - Subaru WRX S4 VAG Applied A-D (2014-2021)","public_title":null,"options":["Default Title"],"price":9849,"weight":1800,"compare_at_price":14700,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/project-mu-b-spec-front-brake-pads-subaru-wrx-s4-vag-applied-a-d-2014-2021-rzcrew.jpg?v=1710328600"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/project-mu-b-spec-front-brake-pads-subaru-wrx-s4-vag-applied-a-d-2014-2021-rzcrew.jpg?v=1710328600","options":["Title"],"media":[{"alt":"Project Mu - B-Spec Front Brake Pads - Subaru WRX S4 VAG Applied A-D (2014-2021) - F916_Type_B-Spec - Rzcrewgarage","id":22365740597430,"position":1,"preview_image":{"aspect_ratio":1.56,"height":250,"width":390,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/project-mu-b-spec-front-brake-pads-subaru-wrx-s4-vag-applied-a-d-2014-2021-rzcrew.jpg?v=1710328600"},"aspect_ratio":1.56,"height":250,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/project-mu-b-spec-front-brake-pads-subaru-wrx-s4-vag-applied-a-d-2014-2021-rzcrew.jpg?v=1710328600","width":390}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Project Mu\u003cbr\u003ePosition: Front\u003cbr\u003ePurpose: Street,Circuit\u003cbr\u003eMaterial: Super Graphite Metallic (Non-Asbestos)\u003cbr\u003eApplicable Rotor Temperature: 0~500C\u003cbr\u003eFriction Coefficient: 0.32~0.45\u003cbr\u003e\u003cbr\u003eThese brake pads have been designed for everyday use street sport applications. This specific compound was developed for fade resistance, improved braking with great cost performance.\u003cbr\u003e\u003cbr\u003eDisclaimer:\u003cbr\u003e\u003cbr\u003eProduct picture is generic. Actual Brake pad shape may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - WRX S4 - VAG Applied A (2014-2015) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied B (2015-2016) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied C (2016-2017) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied D (2017-2021) FA20\u003c!--split--\u003e"}

{"id":6260804288694,"title":"Project Mu - B-Spec Rear Brake Pads - Subaru WRX S4 VAG Applied A-D (2014-2021)","handle":"project-mu-b-spec-rear-brake-pads-subaru-wrx-s4-vag-applied-a-d-2014-2021-r918_type_b-spec","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Project Mu\u003cbr\u003ePosition: Rear\u003cbr\u003ePurpose: Street,Circuit\u003cbr\u003eMaterial: Super Graphite Metallic (Non-Asbestos)\u003cbr\u003eApplicable Rotor Temperature: 0~500C\u003cbr\u003eFriction Coefficient: 0.32~0.45\u003cbr\u003e\u003cbr\u003eThese brake pads have been designed for everyday use street sport applications. This specific compound was developed for fade resistance, improved braking with great cost performance.\u003cbr\u003e\u003cbr\u003eDisclaimer:\u003cbr\u003e\u003cbr\u003eProduct picture is generic. Actual Brake pad shape may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - WRX S4 - VAG Applied A (2014-2015) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied B (2015-2016) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied C (2016-2017) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied D (2017-2021) FA20\u003c!--split--\u003e","published_at":"2021-02-12T17:00:57+08:00","created_at":"2021-02-12T17:00:58+08:00","vendor":"Project Mu","type":"Brake Pads","tags":["2014","2015","2016","2017","2018","2019","2020","2021","brake-pads","circuit","jp1","project-mu","rear","street","subaru","wrx-s4-vag-applied-a-2014-2015-tc-fa20f-h4","wrx-s4-vag-applied-b-2015-2016-tc-fa20f-h4","wrx-s4-vag-applied-c-2016-2018-tc-fa20f-h4","wrx-s4-vag-applied-d-2017-2021-tc-fa20f-h4","ws132"],"price":9316,"price_min":9316,"price_max":9316,"available":true,"price_varies":false,"compare_at_price":13700,"compare_at_price_min":13700,"compare_at_price_max":13700,"compare_at_price_varies":false,"variants":[{"id":38029997473974,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"R918_Type_B-Spec","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Project Mu - B-Spec Rear Brake Pads - Subaru WRX S4 VAG Applied A-D (2014-2021)","public_title":null,"options":["Default Title"],"price":9316,"weight":1800,"compare_at_price":13700,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/project-mu-b-spec-rear-brake-pads-subaru-wrx-s4-vag-applied-a-d-2014-2021-rzcrew.jpg?v=1710327434"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/project-mu-b-spec-rear-brake-pads-subaru-wrx-s4-vag-applied-a-d-2014-2021-rzcrew.jpg?v=1710327434","options":["Title"],"media":[{"alt":"Project Mu - B-Spec Rear Brake Pads - Subaru WRX S4 VAG Applied A-D (2014-2021) - R918_Type_B-Spec - Rzcrewgarage","id":22366684545206,"position":1,"preview_image":{"aspect_ratio":1.56,"height":250,"width":390,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/project-mu-b-spec-rear-brake-pads-subaru-wrx-s4-vag-applied-a-d-2014-2021-rzcrew.jpg?v=1710327434"},"aspect_ratio":1.56,"height":250,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/project-mu-b-spec-rear-brake-pads-subaru-wrx-s4-vag-applied-a-d-2014-2021-rzcrew.jpg?v=1710327434","width":390}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Project Mu\u003cbr\u003ePosition: Rear\u003cbr\u003ePurpose: Street,Circuit\u003cbr\u003eMaterial: Super Graphite Metallic (Non-Asbestos)\u003cbr\u003eApplicable Rotor Temperature: 0~500C\u003cbr\u003eFriction Coefficient: 0.32~0.45\u003cbr\u003e\u003cbr\u003eThese brake pads have been designed for everyday use street sport applications. This specific compound was developed for fade resistance, improved braking with great cost performance.\u003cbr\u003e\u003cbr\u003eDisclaimer:\u003cbr\u003e\u003cbr\u003eProduct picture is generic. Actual Brake pad shape may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - WRX S4 - VAG Applied A (2014-2015) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied B (2015-2016) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied C (2016-2017) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied D (2017-2021) FA20\u003c!--split--\u003e"}

{"id":6260686815414,"title":"Project Mu - Bestop Front Brake Pads - Subaru WRX S4 VAG Applied A-D (2014-2021)","handle":"project-mu-bestop-front-brake-pads-subaru-wrx-s4-vag-applied-a-d-2014-2021-f916_type_bestop","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Project Mu\u003cbr\u003ePosition: Front\u003cbr\u003ePurpose: Street\u003cbr\u003eMaterial: Non-steel\u003cbr\u003eApplicable Rotor Temperature: 0~350C\u003cbr\u003eFriction Coefficient (?): 0.30~0.35\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- Compatible for Vehicle inspection\u003cbr\u003e- Compatible with Radial Tire\u003cbr\u003e- Compatible with Bigger Wheels\u003cbr\u003e- Less Noise and Dust\u003cbr\u003e\u003cbr\u003eThese pads have been designed for standard applications as OEM replacements. These provide the best combination of cost and OEM quality braking characteristics.\u003cbr\u003e\u003cbr\u003eDisclaimer:\u003cbr\u003e\u003cbr\u003eProduct picture is generic. Actual Brake pad shape may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - WRX S4 - VAG Applied A (2014-2015) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied B (2015-2016) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied C (2016-2017) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied D (2017-2021) FA20\u003c!--split--\u003e","published_at":"2021-02-12T16:07:23+08:00","created_at":"2021-02-12T16:07:24+08:00","vendor":"Project Mu","type":"Brake Pads","tags":["2014","2015","2016","2017","2018","2019","2020","2021","brake-pads","front","jp1","project-mu","street","subaru","wrx-s4-vag-applied-a-2014-2015-tc-fa20f-h4","wrx-s4-vag-applied-b-2015-2016-tc-fa20f-h4","wrx-s4-vag-applied-c-2016-2018-tc-fa20f-h4","wrx-s4-vag-applied-d-2017-2021-tc-fa20f-h4","ws132"],"price":6528,"price_min":6528,"price_max":6528,"available":true,"price_varies":false,"compare_at_price":9600,"compare_at_price_min":9600,"compare_at_price_max":9600,"compare_at_price_varies":false,"variants":[{"id":38029831045302,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"F916_Type_Bestop","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Project Mu - Bestop Front Brake Pads - Subaru WRX S4 VAG Applied A-D (2014-2021)","public_title":null,"options":["Default Title"],"price":6528,"weight":1800,"compare_at_price":9600,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/project-mu-bestop-front-brake-pads-subaru-wrx-s4-vag-applied-a-d-2014-2021-rzcrew.jpg?v=1710328601"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/project-mu-bestop-front-brake-pads-subaru-wrx-s4-vag-applied-a-d-2014-2021-rzcrew.jpg?v=1710328601","options":["Title"],"media":[{"alt":"Project Mu - Bestop Front Brake Pads - Subaru WRX S4 VAG Applied A-D (2014-2021) - F916_Type_Bestop - Rzcrewgarage","id":22365739712694,"position":1,"preview_image":{"aspect_ratio":1.653,"height":320,"width":529,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/project-mu-bestop-front-brake-pads-subaru-wrx-s4-vag-applied-a-d-2014-2021-rzcrew.jpg?v=1710328601"},"aspect_ratio":1.653,"height":320,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/project-mu-bestop-front-brake-pads-subaru-wrx-s4-vag-applied-a-d-2014-2021-rzcrew.jpg?v=1710328601","width":529}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Project Mu\u003cbr\u003ePosition: Front\u003cbr\u003ePurpose: Street\u003cbr\u003eMaterial: Non-steel\u003cbr\u003eApplicable Rotor Temperature: 0~350C\u003cbr\u003eFriction Coefficient (?): 0.30~0.35\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- Compatible for Vehicle inspection\u003cbr\u003e- Compatible with Radial Tire\u003cbr\u003e- Compatible with Bigger Wheels\u003cbr\u003e- Less Noise and Dust\u003cbr\u003e\u003cbr\u003eThese pads have been designed for standard applications as OEM replacements. These provide the best combination of cost and OEM quality braking characteristics.\u003cbr\u003e\u003cbr\u003eDisclaimer:\u003cbr\u003e\u003cbr\u003eProduct picture is generic. Actual Brake pad shape may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - WRX S4 - VAG Applied A (2014-2015) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied B (2015-2016) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied C (2016-2017) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied D (2017-2021) FA20\u003c!--split--\u003e"}

{"id":6260804255926,"title":"Project Mu - Bestop Rear Brake Pads - Subaru WRX S4 VAG Applied A-D (2014-2021)","handle":"project-mu-bestop-rear-brake-pads-subaru-wrx-s4-vag-applied-a-d-2014-2021-r918_type_bestop","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Project Mu\u003cbr\u003ePosition: Rear\u003cbr\u003ePurpose: Street\u003cbr\u003eMaterial: Non-steel\u003cbr\u003eApplicable Rotor Temperature: 0~350C\u003cbr\u003eFriction Coefficient (?): 0.30~0.35\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- Compatible for Vehicle inspection\u003cbr\u003e- Compatible with Radial Tire\u003cbr\u003e- Compatible with Bigger Wheels\u003cbr\u003e- Less Noise and Dust\u003cbr\u003e\u003cbr\u003eThese pads have been designed for standard applications as OEM replacements. These provide the best combination of cost and OEM quality braking characteristics.\u003cbr\u003e\u003cbr\u003eDisclaimer:\u003cbr\u003e\u003cbr\u003eProduct picture is generic. Actual Brake pad shape may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - WRX S4 - VAG Applied A (2014-2015) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied B (2015-2016) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied C (2016-2017) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied D (2017-2021) FA20\u003c!--split--\u003e","published_at":"2021-02-12T17:00:55+08:00","created_at":"2021-02-12T17:00:56+08:00","vendor":"Project Mu","type":"Brake Pads","tags":["2014","2015","2016","2017","2018","2019","2020","2021","brake-pads","jp1","project-mu","rear","street","subaru","wrx-s4-vag-applied-a-2014-2015-tc-fa20f-h4","wrx-s4-vag-applied-b-2015-2016-tc-fa20f-h4","wrx-s4-vag-applied-c-2016-2018-tc-fa20f-h4","wrx-s4-vag-applied-d-2017-2021-tc-fa20f-h4","ws132"],"price":6528,"price_min":6528,"price_max":6528,"available":true,"price_varies":false,"compare_at_price":9600,"compare_at_price_min":9600,"compare_at_price_max":9600,"compare_at_price_varies":false,"variants":[{"id":38029997441206,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"R918_Type_Bestop","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Project Mu - Bestop Rear Brake Pads - Subaru WRX S4 VAG Applied A-D (2014-2021)","public_title":null,"options":["Default Title"],"price":6528,"weight":1800,"compare_at_price":9600,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/project-mu-bestop-rear-brake-pads-subaru-wrx-s4-vag-applied-a-d-2014-2021-rzcrew.jpg?v=1710327435"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/project-mu-bestop-rear-brake-pads-subaru-wrx-s4-vag-applied-a-d-2014-2021-rzcrew.jpg?v=1710327435","options":["Title"],"media":[{"alt":"Project Mu - Bestop Rear Brake Pads - Subaru WRX S4 VAG Applied A-D (2014-2021) - R918_Type_Bestop - Rzcrewgarage","id":22366684217526,"position":1,"preview_image":{"aspect_ratio":1.653,"height":320,"width":529,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/project-mu-bestop-rear-brake-pads-subaru-wrx-s4-vag-applied-a-d-2014-2021-rzcrew.jpg?v=1710327435"},"aspect_ratio":1.653,"height":320,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/project-mu-bestop-rear-brake-pads-subaru-wrx-s4-vag-applied-a-d-2014-2021-rzcrew.jpg?v=1710327435","width":529}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Project Mu\u003cbr\u003ePosition: Rear\u003cbr\u003ePurpose: Street\u003cbr\u003eMaterial: Non-steel\u003cbr\u003eApplicable Rotor Temperature: 0~350C\u003cbr\u003eFriction Coefficient (?): 0.30~0.35\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- Compatible for Vehicle inspection\u003cbr\u003e- Compatible with Radial Tire\u003cbr\u003e- Compatible with Bigger Wheels\u003cbr\u003e- Less Noise and Dust\u003cbr\u003e\u003cbr\u003eThese pads have been designed for standard applications as OEM replacements. These provide the best combination of cost and OEM quality braking characteristics.\u003cbr\u003e\u003cbr\u003eDisclaimer:\u003cbr\u003e\u003cbr\u003eProduct picture is generic. Actual Brake pad shape may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - WRX S4 - VAG Applied A (2014-2015) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied B (2015-2016) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied C (2016-2017) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied D (2017-2021) FA20\u003c!--split--\u003e"}

{"id":6260686913718,"title":"Project Mu - Comp-B for Gymkhana Front Brake Pads - Subaru WRX S4 VAG Applied A-D (2014-2021)","handle":"project-mu-comp-b-for-gymkhana-front-brake-pads-subaru-wrx-s4-vag-applied-a-d-2014-2021-f916_type_comp-b_for_gymkhana","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Project Mu\u003cbr\u003ePosition: Front\u003cbr\u003ePurpose: Street,Circuit\u003cbr\u003eMaterial: Super Graphite Metallic\u003cbr\u003eApplicable Rotor Temperature: 0~450C\u003cbr\u003eFriction Coefficient: 0.38~0.49\u003cbr\u003e\u003cbr\u003eThese brake pads have been designed to provide the ultimate braking advantage for competition gymkhana use. Development solely focusing on total control requested in Gymkhana.\u003cbr\u003e\u003cbr\u003eDisclaimer:\u003cbr\u003e\u003cbr\u003eProduct picture is generic. Actual Brake pad shape may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - WRX S4 - VAG Applied A (2014-2015) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied B (2015-2016) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied C (2016-2017) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied D (2017-2021) FA20\u003c!--split--\u003e","published_at":"2021-02-12T16:07:26+08:00","created_at":"2021-02-12T16:07:27+08:00","vendor":"Project Mu","type":"Brake Pads","tags":["2014","2015","2016","2017","2018","2019","2020","2021","brake-pads","circuit","front","jp1","project-mu","street","subaru","wrx-s4-vag-applied-a-2014-2015-tc-fa20f-h4","wrx-s4-vag-applied-b-2015-2016-tc-fa20f-h4","wrx-s4-vag-applied-c-2016-2018-tc-fa20f-h4","wrx-s4-vag-applied-d-2017-2021-tc-fa20f-h4","ws132"],"price":12648,"price_min":12648,"price_max":12648,"available":true,"price_varies":false,"compare_at_price":18600,"compare_at_price_min":18600,"compare_at_price_max":18600,"compare_at_price_varies":false,"variants":[{"id":38029831110838,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"F916_Type_Comp-B_for_Gymkhana","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Project Mu - Comp-B for Gymkhana Front Brake Pads - Subaru WRX S4 VAG Applied A-D (2014-2021)","public_title":null,"options":["Default Title"],"price":12648,"weight":1800,"compare_at_price":18600,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/project-mu-comp-b-for-gymkhana-front-brake-pads-subaru-wrx-s4-vag-applied-a-d-2014-2021-rzcrew.jpg?v=1710328594"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/project-mu-comp-b-for-gymkhana-front-brake-pads-subaru-wrx-s4-vag-applied-a-d-2014-2021-rzcrew.jpg?v=1710328594","options":["Title"],"media":[{"alt":"Project Mu - Comp-B for Gymkhana Front Brake Pads - Subaru WRX S4 VAG Applied A-D (2014-2021) - F916_Type_Comp-B_for_Gymkhana - Rzcrewgarage","id":22365740761270,"position":1,"preview_image":{"aspect_ratio":2.116,"height":250,"width":529,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/project-mu-comp-b-for-gymkhana-front-brake-pads-subaru-wrx-s4-vag-applied-a-d-2014-2021-rzcrew.jpg?v=1710328594"},"aspect_ratio":2.116,"height":250,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/project-mu-comp-b-for-gymkhana-front-brake-pads-subaru-wrx-s4-vag-applied-a-d-2014-2021-rzcrew.jpg?v=1710328594","width":529}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Project Mu\u003cbr\u003ePosition: Front\u003cbr\u003ePurpose: Street,Circuit\u003cbr\u003eMaterial: Super Graphite Metallic\u003cbr\u003eApplicable Rotor Temperature: 0~450C\u003cbr\u003eFriction Coefficient: 0.38~0.49\u003cbr\u003e\u003cbr\u003eThese brake pads have been designed to provide the ultimate braking advantage for competition gymkhana use. Development solely focusing on total control requested in Gymkhana.\u003cbr\u003e\u003cbr\u003eDisclaimer:\u003cbr\u003e\u003cbr\u003eProduct picture is generic. Actual Brake pad shape may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - WRX S4 - VAG Applied A (2014-2015) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied B (2015-2016) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied C (2016-2017) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied D (2017-2021) FA20\u003c!--split--\u003e"}

{"id":6260804321462,"title":"Project Mu - Comp-B for Gymkhana Rear Brake Pads - Subaru WRX S4 VAG Applied A-D (2014-2021)","handle":"project-mu-comp-b-for-gymkhana-rear-brake-pads-subaru-wrx-s4-vag-applied-a-d-2014-2021-r918_type_comp-b_for_gymkhana","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Project Mu\u003cbr\u003ePosition: Rear\u003cbr\u003ePurpose: Street,Circuit\u003cbr\u003eMaterial: Super Graphite Metallic\u003cbr\u003eApplicable Rotor Temperature: 0~450C\u003cbr\u003eFriction Coefficient: 0.38~0.49\u003cbr\u003e\u003cbr\u003eThese brake pads have been designed to provide the ultimate braking advantage for competition gymkhana use. Development solely focusing on total control requested in Gymkhana.\u003cbr\u003e\u003cbr\u003eDisclaimer:\u003cbr\u003e\u003cbr\u003eProduct picture is generic. Actual Brake pad shape may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - WRX S4 - VAG Applied A (2014-2015) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied B (2015-2016) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied C (2016-2017) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied D (2017-2021) FA20\u003c!--split--\u003e","published_at":"2021-02-12T17:00:58+08:00","created_at":"2021-02-12T17:00:59+08:00","vendor":"Project Mu","type":"Brake Pads","tags":["2014","2015","2016","2017","2018","2019","2020","2021","brake-pads","circuit","jp1","project-mu","rear","street","subaru","wrx-s4-vag-applied-a-2014-2015-tc-fa20f-h4","wrx-s4-vag-applied-b-2015-2016-tc-fa20f-h4","wrx-s4-vag-applied-c-2016-2018-tc-fa20f-h4","wrx-s4-vag-applied-d-2017-2021-tc-fa20f-h4","ws132"],"price":11968,"price_min":11968,"price_max":11968,"available":true,"price_varies":false,"compare_at_price":17600,"compare_at_price_min":17600,"compare_at_price_max":17600,"compare_at_price_varies":false,"variants":[{"id":38029997539510,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"R918_Type_Comp-B_for_Gymkhana","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Project Mu - Comp-B for Gymkhana Rear Brake Pads - Subaru WRX S4 VAG Applied A-D (2014-2021)","public_title":null,"options":["Default Title"],"price":11968,"weight":1800,"compare_at_price":17600,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/project-mu-comp-b-for-gymkhana-rear-brake-pads-subaru-wrx-s4-vag-applied-a-d-2014-2021-rzcrew.jpg?v=1710327434"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/project-mu-comp-b-for-gymkhana-rear-brake-pads-subaru-wrx-s4-vag-applied-a-d-2014-2021-rzcrew.jpg?v=1710327434","options":["Title"],"media":[{"alt":"Project Mu - Comp-B for Gymkhana Rear Brake Pads - Subaru WRX S4 VAG Applied A-D (2014-2021) - R918_Type_Comp-B_for_Gymkhana - Rzcrewgarage","id":22366684741814,"position":1,"preview_image":{"aspect_ratio":2.116,"height":250,"width":529,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/project-mu-comp-b-for-gymkhana-rear-brake-pads-subaru-wrx-s4-vag-applied-a-d-2014-2021-rzcrew.jpg?v=1710327434"},"aspect_ratio":2.116,"height":250,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/project-mu-comp-b-for-gymkhana-rear-brake-pads-subaru-wrx-s4-vag-applied-a-d-2014-2021-rzcrew.jpg?v=1710327434","width":529}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Project Mu\u003cbr\u003ePosition: Rear\u003cbr\u003ePurpose: Street,Circuit\u003cbr\u003eMaterial: Super Graphite Metallic\u003cbr\u003eApplicable Rotor Temperature: 0~450C\u003cbr\u003eFriction Coefficient: 0.38~0.49\u003cbr\u003e\u003cbr\u003eThese brake pads have been designed to provide the ultimate braking advantage for competition gymkhana use. Development solely focusing on total control requested in Gymkhana.\u003cbr\u003e\u003cbr\u003eDisclaimer:\u003cbr\u003e\u003cbr\u003eProduct picture is generic. Actual Brake pad shape may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - WRX S4 - VAG Applied A (2014-2015) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied B (2015-2016) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied C (2016-2017) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied D (2017-2021) FA20\u003c!--split--\u003e"}

{"id":6260686946486,"title":"Project Mu - HC+ Front Brake Pads - Subaru WRX S4 VAG Applied A-D (2014-2021)","handle":"project-mu-hc-front-brake-pads-subaru-wrx-s4-vag-applied-a-d-2014-2021-f916_type_hc","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Project Mu\u003cbr\u003ePosition: Front\u003cbr\u003ePurpose: Street,Circuit\u003cbr\u003eMaterial: Super Graphite Metallic\u003cbr\u003eApplicable Rotor Temperature (C): 0~800\u003cbr\u003eFriction Coefficient: 0.43~0.58\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- Compatible for Vehicle inspection\u003cbr\u003e- Compatible with Radial Tire\u003cbr\u003e- Compatible with Bigger Wheels\u003cbr\u003e- Less Noise and Dust\u003cbr\u003e\u003cbr\u003eThese brake pads have been designed to be highly effective on circuit to street sport applications. This specific compound was developed for the ultimate combination of consistent control throughout the whole operating temperature range.\u003cbr\u003e\u003cbr\u003eDisclaimer:\u003cbr\u003e\u003cbr\u003eProduct picture is generic. Actual Brake pad shape may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - WRX S4 - VAG Applied A (2014-2015) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied B (2015-2016) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied C (2016-2017) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied D (2017-2021) FA20\u003c!--split--\u003e","published_at":"2021-02-12T16:07:28+08:00","created_at":"2021-02-12T16:07:28+08:00","vendor":"Project Mu","type":"Brake Pads","tags":["2014","2015","2016","2017","2018","2019","2020","2021","brake-pads","circuit","front","jp1","project-mu","street","subaru","wrx-s4-vag-applied-a-2014-2015-tc-fa20f-h4","wrx-s4-vag-applied-b-2015-2016-tc-fa20f-h4","wrx-s4-vag-applied-c-2016-2018-tc-fa20f-h4","wrx-s4-vag-applied-d-2017-2021-tc-fa20f-h4","ws132"],"price":15300,"price_min":15300,"price_max":15300,"available":true,"price_varies":false,"compare_at_price":22500,"compare_at_price_min":22500,"compare_at_price_max":22500,"compare_at_price_varies":false,"variants":[{"id":38029831143606,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"F916_Type_HC+","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Project Mu - HC+ Front Brake Pads - Subaru WRX S4 VAG Applied A-D (2014-2021)","public_title":null,"options":["Default Title"],"price":15300,"weight":1800,"compare_at_price":22500,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/project-mu-hc-front-brake-pads-subaru-wrx-s4-vag-applied-a-d-2014-2021-rzcrew.jpg?v=1710328594"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/project-mu-hc-front-brake-pads-subaru-wrx-s4-vag-applied-a-d-2014-2021-rzcrew.jpg?v=1710328594","options":["Title"],"media":[{"alt":"Project Mu - HC+ Front Brake Pads - Subaru WRX S4 VAG Applied A-D (2014-2021) - F916_Type_HC+ - Rzcrewgarage","id":22365741908150,"position":1,"preview_image":{"aspect_ratio":1.56,"height":250,"width":390,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/project-mu-hc-front-brake-pads-subaru-wrx-s4-vag-applied-a-d-2014-2021-rzcrew.jpg?v=1710328594"},"aspect_ratio":1.56,"height":250,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/project-mu-hc-front-brake-pads-subaru-wrx-s4-vag-applied-a-d-2014-2021-rzcrew.jpg?v=1710328594","width":390}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Project Mu\u003cbr\u003ePosition: Front\u003cbr\u003ePurpose: Street,Circuit\u003cbr\u003eMaterial: Super Graphite Metallic\u003cbr\u003eApplicable Rotor Temperature (C): 0~800\u003cbr\u003eFriction Coefficient: 0.43~0.58\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- Compatible for Vehicle inspection\u003cbr\u003e- Compatible with Radial Tire\u003cbr\u003e- Compatible with Bigger Wheels\u003cbr\u003e- Less Noise and Dust\u003cbr\u003e\u003cbr\u003eThese brake pads have been designed to be highly effective on circuit to street sport applications. This specific compound was developed for the ultimate combination of consistent control throughout the whole operating temperature range.\u003cbr\u003e\u003cbr\u003eDisclaimer:\u003cbr\u003e\u003cbr\u003eProduct picture is generic. Actual Brake pad shape may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - WRX S4 - VAG Applied A (2014-2015) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied B (2015-2016) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied C (2016-2017) FA20\u003cbr\u003eSubaru - WRX S4 - VAG Applied D (2017-2021) FA20\u003c!--split--\u003e"}