1999

{"id":420434771995,"title":"Competition Clutch Stage 2 - Sprung Steelback Brass Plus - Toyota - 3S-FE","handle":"stage-2-sprung-steelback-brass-plus-toyota-3s-fe-16047-2100","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Competition Clutch\u003cbr\u003eProduct Type: Clutch Kit\u003cbr\u003e\u003cbr\u003eThe Competition Clutch Stage 2 - Street Series 2100 Clutch Kit provides approximately 80% increase in torque capacity and is properly suited for aggressive street use and moderate track use. The Carbon Kevlar material with its alloy backing matched to a performance pressure plate will provide smooth engagement and extended life. 500 mile break-in highly recommended with this set-up. The 2100 Series kit includes a performance pressure plate, a high torque sprung disc with antiburst steel backed Carbon Kevlar facings, all applicable bearings, and the appropriate alignment tool.\u003c!--split--\u003e0\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. 0\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCaldina | ST191G | 1992-1997 | NA | 3S-FE | I4\u003cbr\u003eCaldina | ST195G | 1992-1997 | NA | 3S-FE | I4\u003cbr\u003eCaldina | ST210G | 1997-2002 | NA | 3S-FE | I4\u003cbr\u003eCaldina | ST215G | 1997-2002 | NA | 3S-FE | I4\u003cbr\u003eCamry | SV32 | 1990-1994 | NA | 3S-FE | I4\u003cbr\u003eCamry | SV33 | 1990-1994 | NA | 3S-FE | I4\u003cbr\u003eCelica | ST182 | 1989-1993 | NA | 3S-FE | I4\u003cbr\u003eCelica | ST183 | 1989-1993 | NA | 3S-FE | I4\u003cbr\u003eCelica | ST202 | 1993-1999 | NA | 3S-FE | I4\u003cbr\u003eCelica | ST203 | 1993-1999 | NA | 3S-FE | I4\u003cbr\u003eCelica | ST162 | 1985-1989 | NA | 3S-FE | I4\u003cbr\u003eCorona | ST162 | 1985-1989 | NA | 3S-FE | I4\u003cbr\u003eCorona | ST171 | 1987-1992 | NA | 3S-FE | I4\u003cbr\u003eCorona | ST191 | 1992-1996 | NA | 3S-FE | I4\u003cbr\u003eCorona | ST195 | 1992-1996 | NA | 3S-FE | I4\u003cbr\u003eHarrier | SXU10W | 1997-2003 | NA | 3S-FE | I4\u003cbr\u003eHarrier | SXU15W | 1997-2003 | NA | 3S-FE | I4\u003c!--split--\u003e","published_at":"2025-08-22T14:51:25+08:00","created_at":"2017-12-08T23:33:28+08:00","vendor":"Competition Clutch","type":"Clutch Parts and Kits","tags":["1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","caldina-st191g-1992-1997-na-3s-fe-i4","caldina-st195g-1992-1997-na-3s-fe-i4","caldina-st210g-1997-2002-na-3s-fe-i4","caldina-st215g-1997-2002-na-3s-fe-i4","camry-sv32-1990-1994-na-3s-fe-i4","camry-sv33-1990-1994-na-3s-fe-i4","celica-st162-1985-1989-na-3s-fe-i4","celica-st182-1989-1993-na-3s-fe-i4","celica-st183-1989-1993-na-3s-fe-i4","celica-st202-1993-1999-na-3s-fe-i4","celica-st203-1993-1999-na-3s-fe-i4","clutch-kit","clutch-parts-and-kits","competition-clutch","corona-st162-1985-1989-na-3s-fe-i4","corona-st171-1987-1992-na-3s-fe-i4","corona-st191-1992-1996-na-3s-fe-i4","corona-st195-1992-1996-na-3s-fe-i4","harrier-sxu10w-1997-2003-na-3s-fe-i4","harrier-sxu15w-1997-2003-na-3s-fe-i4","toyota","US1","ws115"],"price":53680,"price_min":53680,"price_max":53680,"available":false,"price_varies":false,"compare_at_price":57200,"compare_at_price_min":57200,"compare_at_price_max":57200,"compare_at_price_varies":false,"variants":[{"id":5118469177371,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"16047-2100","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Competition Clutch Stage 2 - Sprung Steelback Brass Plus - Toyota - 3S-FE","public_title":null,"options":["Default Title"],"price":53680,"weight":10000,"compare_at_price":57200,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/comp_clutch_stage2_dd8c74a3-68ca-4af9-b403-c79117962a3c.jpg?v=1710149614"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/comp_clutch_stage2_dd8c74a3-68ca-4af9-b403-c79117962a3c.jpg?v=1710149614","options":["Title"],"media":[{"alt":"Stage 2 - Sprung Steelback Brass Plus - Toyota - 3S-FE - 16047-2100 - Rzcrewgarage","id":26237002743990,"position":1,"preview_image":{"aspect_ratio":1.358,"height":589,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/comp_clutch_stage2_dd8c74a3-68ca-4af9-b403-c79117962a3c.jpg?v=1710149614"},"aspect_ratio":1.358,"height":589,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/comp_clutch_stage2_dd8c74a3-68ca-4af9-b403-c79117962a3c.jpg?v=1710149614","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Competition Clutch\u003cbr\u003eProduct Type: Clutch Kit\u003cbr\u003e\u003cbr\u003eThe Competition Clutch Stage 2 - Street Series 2100 Clutch Kit provides approximately 80% increase in torque capacity and is properly suited for aggressive street use and moderate track use. The Carbon Kevlar material with its alloy backing matched to a performance pressure plate will provide smooth engagement and extended life. 500 mile break-in highly recommended with this set-up. The 2100 Series kit includes a performance pressure plate, a high torque sprung disc with antiburst steel backed Carbon Kevlar facings, all applicable bearings, and the appropriate alignment tool.\u003c!--split--\u003e0\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. 0\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCaldina | ST191G | 1992-1997 | NA | 3S-FE | I4\u003cbr\u003eCaldina | ST195G | 1992-1997 | NA | 3S-FE | I4\u003cbr\u003eCaldina | ST210G | 1997-2002 | NA | 3S-FE | I4\u003cbr\u003eCaldina | ST215G | 1997-2002 | NA | 3S-FE | I4\u003cbr\u003eCamry | SV32 | 1990-1994 | NA | 3S-FE | I4\u003cbr\u003eCamry | SV33 | 1990-1994 | NA | 3S-FE | I4\u003cbr\u003eCelica | ST182 | 1989-1993 | NA | 3S-FE | I4\u003cbr\u003eCelica | ST183 | 1989-1993 | NA | 3S-FE | I4\u003cbr\u003eCelica | ST202 | 1993-1999 | NA | 3S-FE | I4\u003cbr\u003eCelica | ST203 | 1993-1999 | NA | 3S-FE | I4\u003cbr\u003eCelica | ST162 | 1985-1989 | NA | 3S-FE | I4\u003cbr\u003eCorona | ST162 | 1985-1989 | NA | 3S-FE | I4\u003cbr\u003eCorona | ST171 | 1987-1992 | NA | 3S-FE | I4\u003cbr\u003eCorona | ST191 | 1992-1996 | NA | 3S-FE | I4\u003cbr\u003eCorona | ST195 | 1992-1996 | NA | 3S-FE | I4\u003cbr\u003eHarrier | SXU10W | 1997-2003 | NA | 3S-FE | I4\u003cbr\u003eHarrier | SXU15W | 1997-2003 | NA | 3S-FE | I4\u003c!--split--\u003e"}

{"id":420434837531,"title":"Competition Clutch Stage 3 - Sprung Segmented Ceramic - Toyota - 3S-FE","handle":"stage-3-sprung-segmented-ceramic-toyota-3s-fe-16047-2600","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Competition Clutch\u003cbr\u003eProduct Type: Clutch Kit\u003cbr\u003e\u003cbr\u003eThis segmented Ceramic material with a performance pressure plate will provide the ultimate in street and strip combinations. This assembly is suited for up to 150% increase in torque capacity. Provides quick but smooth engagement and extended life. 300 mile break-in recommended with this set-up.\u003cbr\u003e\n\nThe 2600 Series kit includes a performance pressure plate, a high torque sprung disc with segmented Ceramic facings,, all applicable bearings and the appropriate alignment tool.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCaldina | ST191G | 1992-1997 | NA | 3S-FE | I4\u003cbr\u003eCaldina | ST195G | 1992-1997 | NA | 3S-FE | I4\u003cbr\u003eCaldina | ST210G | 1997-2002 | NA | 3S-FE | I4\u003cbr\u003eCaldina | ST215G | 1997-2002 | NA | 3S-FE | I4\u003cbr\u003eCamry | SV32 | 1990-1994 | NA | 3S-FE | I4\u003cbr\u003eCamry | SV33 | 1990-1994 | NA | 3S-FE | I4\u003cbr\u003eCelica | ST182 | 1989-1993 | NA | 3S-FE | I4\u003cbr\u003eCelica | ST183 | 1989-1993 | NA | 3S-FE | I4\u003cbr\u003eCelica | ST202 | 1993-1999 | NA | 3S-FE | I4\u003cbr\u003eCelica | ST203 | 1993-1999 | NA | 3S-FE | I4\u003cbr\u003eCelica | ST162 | 1985-1989 | NA | 3S-FE | I4\u003cbr\u003eCorona | ST162 | 1985-1989 | NA | 3S-FE | I4\u003cbr\u003eCorona | ST171 | 1987-1992 | NA | 3S-FE | I4\u003cbr\u003eCorona | ST191 | 1992-1996 | NA | 3S-FE | I4\u003cbr\u003eCorona | ST195 | 1992-1996 | NA | 3S-FE | I4\u003cbr\u003eHarrier | SXU10W | 1997-2003 | NA | 3S-FE | I4\u003cbr\u003eHarrier | SXU15W | 1997-2003 | NA | 3S-FE | I4\u003c!--split--\u003e","published_at":"2025-08-22T14:51:26+08:00","created_at":"2017-12-08T23:33:28+08:00","vendor":"Competition Clutch","type":"Clutch Parts and Kits","tags":["1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","caldina-st191g-1992-1997-na-3s-fe-i4","caldina-st195g-1992-1997-na-3s-fe-i4","caldina-st210g-1997-2002-na-3s-fe-i4","caldina-st215g-1997-2002-na-3s-fe-i4","camry-sv32-1990-1994-na-3s-fe-i4","camry-sv33-1990-1994-na-3s-fe-i4","celica-st162-1985-1989-na-3s-fe-i4","celica-st182-1989-1993-na-3s-fe-i4","celica-st183-1989-1993-na-3s-fe-i4","celica-st202-1993-1999-na-3s-fe-i4","celica-st203-1993-1999-na-3s-fe-i4","clutch-kit","clutch-parts-and-kits","competition-clutch","corona-st162-1985-1989-na-3s-fe-i4","corona-st171-1987-1992-na-3s-fe-i4","corona-st191-1992-1996-na-3s-fe-i4","corona-st195-1992-1996-na-3s-fe-i4","harrier-sxu10w-1997-2003-na-3s-fe-i4","harrier-sxu15w-1997-2003-na-3s-fe-i4","toyota","US1","ws115"],"price":53680,"price_min":53680,"price_max":53680,"available":false,"price_varies":false,"compare_at_price":57200,"compare_at_price_min":57200,"compare_at_price_max":57200,"compare_at_price_varies":false,"variants":[{"id":5118469242907,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"16047-2600","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Competition Clutch Stage 3 - Sprung Segmented Ceramic - Toyota - 3S-FE","public_title":null,"options":["Default Title"],"price":53680,"weight":10000,"compare_at_price":57200,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/comp_clutch_stage_3_a88ff4a0-c0f5-41cf-9c20-7a21ee699288.jpg?v=1684758187"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/comp_clutch_stage_3_a88ff4a0-c0f5-41cf-9c20-7a21ee699288.jpg?v=1684758187","options":["Title"],"media":[{"alt":"Stage 3 - Sprung Segmented Ceramic - Toyota - 3S-FE - 16047-2600 - Rzcrewgarage","id":26237002776758,"position":1,"preview_image":{"aspect_ratio":1.806,"height":180,"width":325,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/comp_clutch_stage_3_a88ff4a0-c0f5-41cf-9c20-7a21ee699288.jpg?v=1684758187"},"aspect_ratio":1.806,"height":180,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/comp_clutch_stage_3_a88ff4a0-c0f5-41cf-9c20-7a21ee699288.jpg?v=1684758187","width":325}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Competition Clutch\u003cbr\u003eProduct Type: Clutch Kit\u003cbr\u003e\u003cbr\u003eThis segmented Ceramic material with a performance pressure plate will provide the ultimate in street and strip combinations. This assembly is suited for up to 150% increase in torque capacity. Provides quick but smooth engagement and extended life. 300 mile break-in recommended with this set-up.\u003cbr\u003e\n\nThe 2600 Series kit includes a performance pressure plate, a high torque sprung disc with segmented Ceramic facings,, all applicable bearings and the appropriate alignment tool.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCaldina | ST191G | 1992-1997 | NA | 3S-FE | I4\u003cbr\u003eCaldina | ST195G | 1992-1997 | NA | 3S-FE | I4\u003cbr\u003eCaldina | ST210G | 1997-2002 | NA | 3S-FE | I4\u003cbr\u003eCaldina | ST215G | 1997-2002 | NA | 3S-FE | I4\u003cbr\u003eCamry | SV32 | 1990-1994 | NA | 3S-FE | I4\u003cbr\u003eCamry | SV33 | 1990-1994 | NA | 3S-FE | I4\u003cbr\u003eCelica | ST182 | 1989-1993 | NA | 3S-FE | I4\u003cbr\u003eCelica | ST183 | 1989-1993 | NA | 3S-FE | I4\u003cbr\u003eCelica | ST202 | 1993-1999 | NA | 3S-FE | I4\u003cbr\u003eCelica | ST203 | 1993-1999 | NA | 3S-FE | I4\u003cbr\u003eCelica | ST162 | 1985-1989 | NA | 3S-FE | I4\u003cbr\u003eCorona | ST162 | 1985-1989 | NA | 3S-FE | I4\u003cbr\u003eCorona | ST171 | 1987-1992 | NA | 3S-FE | I4\u003cbr\u003eCorona | ST191 | 1992-1996 | NA | 3S-FE | I4\u003cbr\u003eCorona | ST195 | 1992-1996 | NA | 3S-FE | I4\u003cbr\u003eHarrier | SXU10W | 1997-2003 | NA | 3S-FE | I4\u003cbr\u003eHarrier | SXU15W | 1997-2003 | NA | 3S-FE | I4\u003c!--split--\u003e"}

{"id":420434870299,"title":"Competition Clutch Stage 4 - 6 Pad Sprung Ceramic - Toyota - 3S-FE","handle":"stage-4-6-pad-sprung-ceramic-toyota-3s-fe-16047-1620","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Competition Clutch\u003cbr\u003eProduct Type: Clutch Kit\u003cbr\u003e\u003cbr\u003eThis assembly, available with a six puck sprung plate is good for penetrating engagement with higher horsepower applications. This disc complimented by a performance pressure plate provides up to 250% increase in torque capacity. 300 mile break-in recommended with this set-up.\u003cbr\u003e\n\nThe 1620 Series kit includes a performance pressure plate, a 6 puck torque sprung disc with Ceramic buttons, all applicable bearings and the appropriate alignment tool.\u003c!--split--\u003e0\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. 0\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCaldina | ST191G | 1992-1997 | NA | 3S-FE | I4\u003cbr\u003eCaldina | ST195G | 1992-1997 | NA | 3S-FE | I4\u003cbr\u003eCaldina | ST210G | 1997-2002 | NA | 3S-FE | I4\u003cbr\u003eCaldina | ST215G | 1997-2002 | NA | 3S-FE | I4\u003cbr\u003eCamry | SV32 | 1990-1994 | NA | 3S-FE | I4\u003cbr\u003eCamry | SV33 | 1990-1994 | NA | 3S-FE | I4\u003cbr\u003eCelica | ST182 | 1989-1993 | NA | 3S-FE | I4\u003cbr\u003eCelica | ST183 | 1989-1993 | NA | 3S-FE | I4\u003cbr\u003eCelica | ST202 | 1993-1999 | NA | 3S-FE | I4\u003cbr\u003eCelica | ST203 | 1993-1999 | NA | 3S-FE | I4\u003cbr\u003eCelica | ST162 | 1985-1989 | NA | 3S-FE | I4\u003cbr\u003eCorona | ST162 | 1985-1989 | NA | 3S-FE | I4\u003cbr\u003eCorona | ST171 | 1987-1992 | NA | 3S-FE | I4\u003cbr\u003eCorona | ST191 | 1992-1996 | NA | 3S-FE | I4\u003cbr\u003eCorona | ST195 | 1992-1996 | NA | 3S-FE | I4\u003cbr\u003eHarrier | SXU10W | 1997-2003 | NA | 3S-FE | I4\u003cbr\u003eHarrier | SXU15W | 1997-2003 | NA | 3S-FE | I4\u003c!--split--\u003e","published_at":"2025-08-22T14:51:27+08:00","created_at":"2017-12-08T23:33:29+08:00","vendor":"Competition Clutch","type":"Clutch Parts and Kits","tags":["1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","caldina-st191g-1992-1997-na-3s-fe-i4","caldina-st195g-1992-1997-na-3s-fe-i4","caldina-st210g-1997-2002-na-3s-fe-i4","caldina-st215g-1997-2002-na-3s-fe-i4","camry-sv32-1990-1994-na-3s-fe-i4","camry-sv33-1990-1994-na-3s-fe-i4","celica-st162-1985-1989-na-3s-fe-i4","celica-st182-1989-1993-na-3s-fe-i4","celica-st183-1989-1993-na-3s-fe-i4","celica-st202-1993-1999-na-3s-fe-i4","celica-st203-1993-1999-na-3s-fe-i4","clutch-kit","clutch-parts-and-kits","competition-clutch","corona-st162-1985-1989-na-3s-fe-i4","corona-st171-1987-1992-na-3s-fe-i4","corona-st191-1992-1996-na-3s-fe-i4","corona-st195-1992-1996-na-3s-fe-i4","harrier-sxu10w-1997-2003-na-3s-fe-i4","harrier-sxu15w-1997-2003-na-3s-fe-i4","toyota","US1","ws115"],"price":53680,"price_min":53680,"price_max":53680,"available":false,"price_varies":false,"compare_at_price":57200,"compare_at_price_min":57200,"compare_at_price_max":57200,"compare_at_price_varies":false,"variants":[{"id":5118469275675,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"16047-1620","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Competition Clutch Stage 4 - 6 Pad Sprung Ceramic - Toyota - 3S-FE","public_title":null,"options":["Default Title"],"price":53680,"weight":10000,"compare_at_price":57200,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/comp_clutch_stage_4_1e215239-38eb-4cf3-98d2-3dd1c352e5a5.jpg?v=1684758182"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/comp_clutch_stage_4_1e215239-38eb-4cf3-98d2-3dd1c352e5a5.jpg?v=1684758182","options":["Title"],"media":[{"alt":"Stage 4 - 6 Pad Sprung Ceramic - Toyota - 3S-FE - 16047-1620 - Rzcrewgarage","id":26237003169974,"position":1,"preview_image":{"aspect_ratio":1.358,"height":589,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/comp_clutch_stage_4_1e215239-38eb-4cf3-98d2-3dd1c352e5a5.jpg?v=1684758182"},"aspect_ratio":1.358,"height":589,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/comp_clutch_stage_4_1e215239-38eb-4cf3-98d2-3dd1c352e5a5.jpg?v=1684758182","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Competition Clutch\u003cbr\u003eProduct Type: Clutch Kit\u003cbr\u003e\u003cbr\u003eThis assembly, available with a six puck sprung plate is good for penetrating engagement with higher horsepower applications. This disc complimented by a performance pressure plate provides up to 250% increase in torque capacity. 300 mile break-in recommended with this set-up.\u003cbr\u003e\n\nThe 1620 Series kit includes a performance pressure plate, a 6 puck torque sprung disc with Ceramic buttons, all applicable bearings and the appropriate alignment tool.\u003c!--split--\u003e0\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. 0\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCaldina | ST191G | 1992-1997 | NA | 3S-FE | I4\u003cbr\u003eCaldina | ST195G | 1992-1997 | NA | 3S-FE | I4\u003cbr\u003eCaldina | ST210G | 1997-2002 | NA | 3S-FE | I4\u003cbr\u003eCaldina | ST215G | 1997-2002 | NA | 3S-FE | I4\u003cbr\u003eCamry | SV32 | 1990-1994 | NA | 3S-FE | I4\u003cbr\u003eCamry | SV33 | 1990-1994 | NA | 3S-FE | I4\u003cbr\u003eCelica | ST182 | 1989-1993 | NA | 3S-FE | I4\u003cbr\u003eCelica | ST183 | 1989-1993 | NA | 3S-FE | I4\u003cbr\u003eCelica | ST202 | 1993-1999 | NA | 3S-FE | I4\u003cbr\u003eCelica | ST203 | 1993-1999 | NA | 3S-FE | I4\u003cbr\u003eCelica | ST162 | 1985-1989 | NA | 3S-FE | I4\u003cbr\u003eCorona | ST162 | 1985-1989 | NA | 3S-FE | I4\u003cbr\u003eCorona | ST171 | 1987-1992 | NA | 3S-FE | I4\u003cbr\u003eCorona | ST191 | 1992-1996 | NA | 3S-FE | I4\u003cbr\u003eCorona | ST195 | 1992-1996 | NA | 3S-FE | I4\u003cbr\u003eHarrier | SXU10W | 1997-2003 | NA | 3S-FE | I4\u003cbr\u003eHarrier | SXU15W | 1997-2003 | NA | 3S-FE | I4\u003c!--split--\u003e"}

{"id":7442479448246,"title":"Recaro Japan - Base Frame Seat Rail Standard Left - Toyota Celica ST202\/ST202C\/ST203 (1993-1999)","handle":"recaro-japan-base-frame-seat-rail-standard-left-toyota-celica-st202-st202c-st203-1993-1999-2080-551-1","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position:10mm lower than OEM seat.(A case of Style-JJ)Interference: between center console and slide lever at front position of slider.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. FF\/(GT-Four) 4WD. For non-side airbag car only.\u003cbr\u003e- CS,CT,C-classic CSE= the sitting position will be higher because of spacers usage.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Celica - ST202 (1993-1997) 3S-FE\u003cbr\u003eToyota - Celica - ST202 (1997-1999) 3S-FE\u003cbr\u003eToyota - Celica - ST202 (1995-1997) 3S-GE\u003cbr\u003eToyota - Celica - ST202 (1993-1997) 3S-GE\u003cbr\u003eToyota - Celica - ST202 (1997-1999) 3S-GE\u003cbr\u003eToyota - Celica - ST202C (1994-1997) 3S-GE\u003cbr\u003eToyota - Celica - ST202C (1997-1999) 3S-GE\u003cbr\u003eToyota - Celica - ST203 (1993-1997) 3S-FE\u003cbr\u003eToyota - Celica - ST203 (1997-1999) 3S-FE\u003c!--split--\u003e","published_at":"2022-08-23T18:20:39+08:00","created_at":"2022-08-23T18:11:49+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["1993","1994","1995","1996","1997","1998","1999","celica-st202-1993-1999-na-3s-fe-i4","celica-st202-1993-1999-na-3s-ge-i4","celica-st202c-1993-1999-na-3s-ge-i4","celica-st203-1993-1999-na-3s-fe-i4","left","recaro-japan","seat-rails","toyota","ws10"],"price":24700,"price_min":24700,"price_max":24700,"available":true,"price_varies":false,"compare_at_price":23900,"compare_at_price_min":23900,"compare_at_price_max":23900,"compare_at_price_varies":false,"variants":[{"id":41726139826358,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2080.551.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Left - Toyota Celica ST202\/ST202C\/ST203 (1993-1999)","public_title":null,"options":["Default Title"],"price":24700,"weight":17000,"compare_at_price":23900,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-toyota-celica-st202st202cst203-1993-1999-rzcrew.jpg?v=1710320094"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-toyota-celica-st202st202cst203-1993-1999-rzcrew.jpg?v=1710320094","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Left - Toyota Celica ST202\/ST202C\/ST203 (1993-1999) - 2080.551.1 - Rzcrewgarage","id":24895585517750,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-toyota-celica-st202st202cst203-1993-1999-rzcrew.jpg?v=1710320094"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-toyota-celica-st202st202cst203-1993-1999-rzcrew.jpg?v=1710320094","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position:10mm lower than OEM seat.(A case of Style-JJ)Interference: between center console and slide lever at front position of slider.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. FF\/(GT-Four) 4WD. For non-side airbag car only.\u003cbr\u003e- CS,CT,C-classic CSE= the sitting position will be higher because of spacers usage.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Celica - ST202 (1993-1997) 3S-FE\u003cbr\u003eToyota - Celica - ST202 (1997-1999) 3S-FE\u003cbr\u003eToyota - Celica - ST202 (1995-1997) 3S-GE\u003cbr\u003eToyota - Celica - ST202 (1993-1997) 3S-GE\u003cbr\u003eToyota - Celica - ST202 (1997-1999) 3S-GE\u003cbr\u003eToyota - Celica - ST202C (1994-1997) 3S-GE\u003cbr\u003eToyota - Celica - ST202C (1997-1999) 3S-GE\u003cbr\u003eToyota - Celica - ST203 (1993-1997) 3S-FE\u003cbr\u003eToyota - Celica - ST203 (1997-1999) 3S-FE\u003c!--split--\u003e"}

{"id":7442479612086,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Celica ST202\/ST202C\/ST203 (1993-1999)","handle":"recaro-japan-base-frame-seat-rail-standard-right-toyota-celica-st202-st202c-st203-1993-1999-2080-551-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position:10mm lower than OEM seat.(A case of Style-JJ)Interference: between center console and slide lever at front position of slider.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. FF\/(GT-Four) 4WD. For non-side airbag car only.\u003cbr\u003e- CS,CT,C-classic CSE= the sitting position will be higher because of spacers usage.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Celica - ST202 (1993-1997) 3S-FE\u003cbr\u003eToyota - Celica - ST202 (1997-1999) 3S-FE\u003cbr\u003eToyota - Celica - ST202 (1995-1997) 3S-GE\u003cbr\u003eToyota - Celica - ST202 (1993-1997) 3S-GE\u003cbr\u003eToyota - Celica - ST202 (1997-1999) 3S-GE\u003cbr\u003eToyota - Celica - ST202C (1994-1997) 3S-GE\u003cbr\u003eToyota - Celica - ST202C (1997-1999) 3S-GE\u003cbr\u003eToyota - Celica - ST203 (1993-1997) 3S-FE\u003cbr\u003eToyota - Celica - ST203 (1997-1999) 3S-FE\u003c!--split--\u003e","published_at":"2022-08-23T18:21:42+08:00","created_at":"2022-08-23T18:11:56+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["1993","1994","1995","1996","1997","1998","1999","celica-st202-1993-1999-na-3s-fe-i4","celica-st202-1993-1999-na-3s-ge-i4","celica-st202c-1993-1999-na-3s-ge-i4","celica-st203-1993-1999-na-3s-fe-i4","recaro-japan","right","seat-rails","toyota","ws10"],"price":24700,"price_min":24700,"price_max":24700,"available":true,"price_varies":false,"compare_at_price":23900,"compare_at_price_min":23900,"compare_at_price_max":23900,"compare_at_price_varies":false,"variants":[{"id":41726139990198,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2080.551.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Celica ST202\/ST202C\/ST203 (1993-1999)","public_title":null,"options":["Default Title"],"price":24700,"weight":17000,"compare_at_price":23900,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-celica-st202st202cst203-1993-1999-rzcrew.jpg?v=1710320093"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-celica-st202st202cst203-1993-1999-rzcrew.jpg?v=1710320093","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Toyota Celica ST202\/ST202C\/ST203 (1993-1999) - 2080.551.2 - Rzcrewgarage","id":24895585878198,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-celica-st202st202cst203-1993-1999-rzcrew.jpg?v=1710320093"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-toyota-celica-st202st202cst203-1993-1999-rzcrew.jpg?v=1710320093","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position:10mm lower than OEM seat.(A case of Style-JJ)Interference: between center console and slide lever at front position of slider.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. FF\/(GT-Four) 4WD. For non-side airbag car only.\u003cbr\u003e- CS,CT,C-classic CSE= the sitting position will be higher because of spacers usage.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE\u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Celica - ST202 (1993-1997) 3S-FE\u003cbr\u003eToyota - Celica - ST202 (1997-1999) 3S-FE\u003cbr\u003eToyota - Celica - ST202 (1995-1997) 3S-GE\u003cbr\u003eToyota - Celica - ST202 (1993-1997) 3S-GE\u003cbr\u003eToyota - Celica - ST202 (1997-1999) 3S-GE\u003cbr\u003eToyota - Celica - ST202C (1994-1997) 3S-GE\u003cbr\u003eToyota - Celica - ST202C (1997-1999) 3S-GE\u003cbr\u003eToyota - Celica - ST203 (1993-1997) 3S-FE\u003cbr\u003eToyota - Celica - ST203 (1997-1999) 3S-FE\u003c!--split--\u003e"}