2002

{"id":8339700121782,"title":"Spoon Mechanical 1.5 way Front LSD - Honda Civic Type R FK8","handle":"spoon-mechanical-1-5-way-front-lsd-honda-civic-type-r-fk8-fk8-41000-fl5-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 41000-FL5-000\u003cbr\u003ePosition: Front\u003cbr\u003eType: 1.5 wayAn LSD is an essential item for front-wheel drive sports cars. The\nstandard helical LSD balances sportiness and comfort, but lacks performance for sporty driving.\nTherefore, we developed a mechanical LSD to enhance sportiness. After repeated on-road testing on various stages, we developed\na 1.5-way differential with a differential cam angle of 50° on the ON side and 20° off the OFF side, and initial torque of 5.0-6.0kg.\nFurthermore, by using a clutch plate that reduces chattering noise, we have achieved a higher level of comfort than conventional mechanical LSDs.\nThis LSD maximizes the Civic Type R's cornering performance.\u003cbr\u003e\n\nLSD is a must item for front-engine front-wheel drives.\u003cbr\u003e\nThe original helical LSD installed in the stock vehicle is designed to accommodate both sports driving and comfort at an acceptable level. We wanted to make it better, especially for performance focused driving.\nOur solution is a custom designed mechanical LSD. After numerous testing under various driving stages, we are proud to offer our 1.5 WAY mechanical LSD, ON 50°\/OFF 20°cam angle settings with initial torque setting of 5.0~6.0kg.\nOur LSD is equipped with a clutch plate to minimize gear chattering, significantly improving daily-driving performance compared to conventional mechanical LSDs.\nNow, you're ready to truly experience the cornering performance of your CIVIC TYPE R!\u003cbr\u003e\n\nInitial Setting 1.5 WAY\u003cbr\u003e\nInitial Cam Setting ON 50°\/OFF 20°\u003cbr\u003e\nInitial Torque 5.0~6.0kg\u003cbr\u003e\n(Side bearings included)\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic Type R | FK8 | 2017-2018 | TC | K20C1 | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2025-10-23T11:34:47+08:00","created_at":"2025-10-23T11:34:47+08:00","vendor":"Spoon","type":"Limited Slip Diffs","tags":["1-5-way","185000x15y1.05z500","2002","2003","2004","2005","2006","2007","2008","accord-euro-r-cl7-2002-2008-na-k20a-i4","autopostr_facebook_73913","autopostr_instagram_73914","CTA35","front","honda","jp1","limited-slip-diffs","mt","random","spoon","ws19"],"price":178080,"price_min":178080,"price_max":178080,"available":true,"price_varies":false,"compare_at_price":185500,"compare_at_price_min":185500,"compare_at_price_max":185500,"compare_at_price_varies":false,"variants":[{"id":44352538771638,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"41000-FL5-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Mechanical 1.5 way Front LSD - Honda Civic Type R FK8","public_title":null,"options":["Default Title"],"price":178080,"weight":9000,"compare_at_price":185500,"inventory_quantity":49,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/41000-FL5-000_2d1e9b77-3a21-49bf-af05-20f09b910359.jpg?v=1761190489"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/41000-FL5-000_2d1e9b77-3a21-49bf-af05-20f09b910359.jpg?v=1761190489","options":["Title"],"media":[{"alt":"Spoon Mechanical 1.5 way Front LSD - Honda Civic Type R FK8 - FK8 - 41000-FL5-000","id":30765393412278,"position":1,"preview_image":{"aspect_ratio":1.501,"height":853,"width":1280,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/41000-FL5-000_2d1e9b77-3a21-49bf-af05-20f09b910359.jpg?v=1761190489"},"aspect_ratio":1.501,"height":853,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/41000-FL5-000_2d1e9b77-3a21-49bf-af05-20f09b910359.jpg?v=1761190489","width":1280}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 41000-FL5-000\u003cbr\u003ePosition: Front\u003cbr\u003eType: 1.5 wayAn LSD is an essential item for front-wheel drive sports cars. The\nstandard helical LSD balances sportiness and comfort, but lacks performance for sporty driving.\nTherefore, we developed a mechanical LSD to enhance sportiness. After repeated on-road testing on various stages, we developed\na 1.5-way differential with a differential cam angle of 50° on the ON side and 20° off the OFF side, and initial torque of 5.0-6.0kg.\nFurthermore, by using a clutch plate that reduces chattering noise, we have achieved a higher level of comfort than conventional mechanical LSDs.\nThis LSD maximizes the Civic Type R's cornering performance.\u003cbr\u003e\n\nLSD is a must item for front-engine front-wheel drives.\u003cbr\u003e\nThe original helical LSD installed in the stock vehicle is designed to accommodate both sports driving and comfort at an acceptable level. We wanted to make it better, especially for performance focused driving.\nOur solution is a custom designed mechanical LSD. After numerous testing under various driving stages, we are proud to offer our 1.5 WAY mechanical LSD, ON 50°\/OFF 20°cam angle settings with initial torque setting of 5.0~6.0kg.\nOur LSD is equipped with a clutch plate to minimize gear chattering, significantly improving daily-driving performance compared to conventional mechanical LSDs.\nNow, you're ready to truly experience the cornering performance of your CIVIC TYPE R!\u003cbr\u003e\n\nInitial Setting 1.5 WAY\u003cbr\u003e\nInitial Cam Setting ON 50°\/OFF 20°\u003cbr\u003e\nInitial Torque 5.0~6.0kg\u003cbr\u003e\n(Side bearings included)\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic Type R | FK8 | 2017-2018 | TC | K20C1 | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":3969502380129,"title":"Spoon Mechanical 1.5 way Front LSD - Honda Civic Type R FL5","handle":"spoon-mechanical-1-5-way-front-lsd-honda-accord-euro-r-cl7-mt-cl7-41000-dc5-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 41000-FL5-000\u003cbr\u003ePosition: Front\u003cbr\u003eType: 1.5 wayAn LSD is an essential item for front-wheel drive sports cars. The\nstandard helical LSD balances sportiness and comfort, but lacks performance for sporty driving.\nTherefore, we developed a mechanical LSD to enhance sportiness. After repeated on-road testing on various stages, we developed\na 1.5-way differential with a differential cam angle of 50° on the ON side and 20° off the OFF side, and initial torque of 5.0-6.0kg.\nFurthermore, by using a clutch plate that reduces chattering noise, we have achieved a higher level of comfort than conventional mechanical LSDs.\nThis LSD maximizes the Civic Type R's cornering performance.\u003cbr\u003e\n\nLSD is a must item for front-engine front-wheel drives.\u003cbr\u003e\nThe original helical LSD installed in the stock vehicle is designed to accommodate both sports driving and comfort at an acceptable level. We wanted to make it better, especially for performance focused driving.\nOur solution is a custom designed mechanical LSD. After numerous testing under various driving stages, we are proud to offer our 1.5 WAY mechanical LSD, ON 50°\/OFF 20°cam angle settings with initial torque setting of 5.0~6.0kg.\nOur LSD is equipped with a clutch plate to minimize gear chattering, significantly improving daily-driving performance compared to conventional mechanical LSDs.\nNow, you're ready to truly experience the cornering performance of your CIVIC TYPE R!\u003cbr\u003e\n\nInitial Setting 1.5 WAY\u003cbr\u003e\nInitial Cam Setting ON 50°\/OFF 20°\u003cbr\u003e\nInitial Torque 5.0~6.0kg\u003cbr\u003e\n(Side bearings included)\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic Type R | FL5 | 2023-2025 | TC | K20C1 | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2019-08-06T13:57:14+08:00","created_at":"2019-08-06T13:57:15+08:00","vendor":"Spoon","type":"Limited Slip Diffs","tags":["1-5-way","185000x15y1.05z500","2002","2003","2004","2005","2006","2007","2008","accord-euro-r-cl7-2002-2008-na-k20a-i4","CTA35","front","honda","JP1","limited-slip-diffs","mt","spoon","ws19"],"price":178080,"price_min":178080,"price_max":178080,"available":true,"price_varies":false,"compare_at_price":185500,"compare_at_price_min":185500,"compare_at_price_max":185500,"compare_at_price_varies":false,"variants":[{"id":29648350281825,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"41000-FL5-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Mechanical 1.5 way Front LSD - Honda Civic Type R FL5","public_title":null,"options":["Default Title"],"price":178080,"weight":9000,"compare_at_price":185500,"inventory_quantity":48,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/41000-FL5-000_171bb8e6-730f-45d9-b5c2-6a77822d6bfb.jpg?v=1761190492"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/41000-FL5-000_171bb8e6-730f-45d9-b5c2-6a77822d6bfb.jpg?v=1761190492","options":["Title"],"media":[{"alt":"Spoon Mechanical - 1.5 way Front LSD - Honda Accord Euro R - CL7 (MT) - CL7 - 41000-DC5-000","id":30765393445046,"position":1,"preview_image":{"aspect_ratio":1.501,"height":853,"width":1280,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/41000-FL5-000_171bb8e6-730f-45d9-b5c2-6a77822d6bfb.jpg?v=1761190492"},"aspect_ratio":1.501,"height":853,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/41000-FL5-000_171bb8e6-730f-45d9-b5c2-6a77822d6bfb.jpg?v=1761190492","width":1280}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 41000-FL5-000\u003cbr\u003ePosition: Front\u003cbr\u003eType: 1.5 wayAn LSD is an essential item for front-wheel drive sports cars. The\nstandard helical LSD balances sportiness and comfort, but lacks performance for sporty driving.\nTherefore, we developed a mechanical LSD to enhance sportiness. After repeated on-road testing on various stages, we developed\na 1.5-way differential with a differential cam angle of 50° on the ON side and 20° off the OFF side, and initial torque of 5.0-6.0kg.\nFurthermore, by using a clutch plate that reduces chattering noise, we have achieved a higher level of comfort than conventional mechanical LSDs.\nThis LSD maximizes the Civic Type R's cornering performance.\u003cbr\u003e\n\nLSD is a must item for front-engine front-wheel drives.\u003cbr\u003e\nThe original helical LSD installed in the stock vehicle is designed to accommodate both sports driving and comfort at an acceptable level. We wanted to make it better, especially for performance focused driving.\nOur solution is a custom designed mechanical LSD. After numerous testing under various driving stages, we are proud to offer our 1.5 WAY mechanical LSD, ON 50°\/OFF 20°cam angle settings with initial torque setting of 5.0~6.0kg.\nOur LSD is equipped with a clutch plate to minimize gear chattering, significantly improving daily-driving performance compared to conventional mechanical LSDs.\nNow, you're ready to truly experience the cornering performance of your CIVIC TYPE R!\u003cbr\u003e\n\nInitial Setting 1.5 WAY\u003cbr\u003e\nInitial Cam Setting ON 50°\/OFF 20°\u003cbr\u003e\nInitial Torque 5.0~6.0kg\u003cbr\u003e\n(Side bearings included)\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic Type R | FL5 | 2023-2025 | TC | K20C1 | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":8160880001206,"title":"Spoon Meter Gear For Spoon LSD 41000-DC5-000","handle":"spoon-meter-gear-for-spoon-lsd-41000-dc5-000-dc5r-41000-dc5-s02","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 41000-DC5-S02\u003cbr\u003eLSD Model: Meter Gear For Spoon LSD 41000-DC5-000\u003cbr\u003eLSD Type: \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis is a replacement parts only For Spoon 41000-DC5-000.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eIntegra type R | DC5R Zenki | 2002-2004 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Kouki | 2004-2006 | NA | K20A | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2025-03-05T13:27:12+08:00","created_at":"2025-03-05T13:14:20+08:00","vendor":"Spoon","type":"Limited Slip Diffs","tags":["1-5-way","15000x15y1.2z500","2002","2003","2004","2005","2006","CTA36","front","honda","integra-type-r-dc5r-kouki-2004-2006-na-k20a-i4","integra-type-r-dc5r-zenki-2002-2004-na-k20a-i4","jp1","limited-slip-diffs","mt","spoon","ws114"],"price":15652,"price_min":15652,"price_max":15652,"available":true,"price_varies":false,"compare_at_price":17200,"compare_at_price_min":17200,"compare_at_price_max":17200,"compare_at_price_varies":false,"variants":[{"id":43823791636662,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"41000-DC5-S02","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Meter Gear For Spoon LSD 41000-DC5-000","public_title":null,"options":["Default Title"],"price":15652,"weight":1200,"compare_at_price":17200,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/WhatsApp_Image_2025-03-05_at_11.14.31_bf010774_ed0a06da-ee89-4377-bf01-de97ec824483.jpg?v=1741151660"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/WhatsApp_Image_2025-03-05_at_11.14.31_bf010774_ed0a06da-ee89-4377-bf01-de97ec824483.jpg?v=1741151660","options":["Title"],"media":[{"alt":"Spoon Meter Gear For Spoon LSD 41000-DC5-000 - DC5R - 41000-DC5-S02","id":29169535221942,"position":1,"preview_image":{"aspect_ratio":1.624,"height":577,"width":937,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/WhatsApp_Image_2025-03-05_at_11.14.31_bf010774_ed0a06da-ee89-4377-bf01-de97ec824483.jpg?v=1741151660"},"aspect_ratio":1.624,"height":577,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/WhatsApp_Image_2025-03-05_at_11.14.31_bf010774_ed0a06da-ee89-4377-bf01-de97ec824483.jpg?v=1741151660","width":937}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 41000-DC5-S02\u003cbr\u003eLSD Model: Meter Gear For Spoon LSD 41000-DC5-000\u003cbr\u003eLSD Type: \u003cbr\u003eTransmission Type: MT\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis is a replacement parts only For Spoon 41000-DC5-000.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eIntegra type R | DC5R Zenki | 2002-2004 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Kouki | 2004-2006 | NA | K20A | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":2142202560609,"title":"Spoon Monocoque Caliper Set - Honda - Accord Euro R CL7","handle":"spoon-monocoque-caliper-set-cl7-45020-mbf-g01","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePosition: Front\u003cbr\u003eRotors Diameter: 45251-5H11416\u003cbr\u003e\u003cbr\u003eThe Spoon 4-pot caliper has been specifically designed and tested for Honda applications. Unlike other 4-pot calipers, Spoon calipers are direct fit and are designed to work with the stock brake system, including the ABS. Spoon calipers use stock Honda size brake pads, which gives users incredible flexibility in choosing pads and controlling future costs. The 4-pot calipers significantly improve both high speed braking and brake pedal feel and its consistency during track use.\u003cbr\u003eThe 4-pot design also makes pad wear more even and minimizes rotor warpage. The aluminium construction greatly reduces un-sprung weight. These benefits are achieved while maintaining a stock feel for daily driving.\u003cbr\u003eSpoon calipers are manufactured by Nissin, the OE supplier of all Honda brakes. When the S2000 was released, Spoon designed the mono-block caliper with a one piece construction and greatly improved rigidity. This has now been made available for most models of Honda.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAccord Euro R | CL7 | 2002-2008 | NA | K20A | I4\u003c!--split--\u003e","published_at":"2019-06-03T21:36:06+08:00","created_at":"2019-06-03T21:36:08+08:00","vendor":"Spoon","type":"Brake Calipers and Kits","tags":["150000x15y1z500","2002","2003","2004","2005","2006","2007","2008","45251-5h11416","accord-euro-r-cl7-2002-2008-na-k20a-i4","brake-calipers-and-kits","CTA262","front","honda","JP1","spoon","ws16"],"price":139887,"price_min":139887,"price_max":182754,"available":true,"price_varies":true,"compare_at_price":141300,"compare_at_price_min":141300,"compare_at_price_max":184600,"compare_at_price_varies":true,"variants":[{"id":32130627567713,"title":"No \/ No","option1":"No","option2":"No","option3":null,"sku":"45020-MBF-G01","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Monocoque Caliper Set - Honda - Accord Euro R CL7 - No \/ No","public_title":"No \/ No","options":["No","No"],"price":139887,"weight":7000,"compare_at_price":141300,"inventory_quantity":49,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32130627633249,"title":"Yes \/ No","option1":"Yes","option2":"No","option3":null,"sku":"45020-MBF-G01 + 45251-5H11416","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Monocoque Caliper Set - Honda - Accord Euro R CL7 - Yes \/ No","public_title":"Yes \/ No","options":["Yes","No"],"price":162261,"weight":19000,"compare_at_price":163900,"inventory_quantity":49,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32130627666017,"title":"No \/ Yes","option1":"No","option2":"Yes","option3":null,"sku":"45020-MBF-G01 + 45022-AP1-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Monocoque Caliper Set - Honda - Accord Euro R CL7 - No \/ Yes","public_title":"No \/ Yes","options":["No","Yes"],"price":160380,"weight":9000,"compare_at_price":162000,"inventory_quantity":49,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32130627698785,"title":"Yes \/ Yes","option1":"Yes","option2":"Yes","option3":null,"sku":"45020-MBF-G01 + 45251-5H11416 + 45022-AP1-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Monocoque Caliper Set - Honda - Accord Euro R CL7 - Yes \/ Yes","public_title":"Yes \/ Yes","options":["Yes","Yes"],"price":182754,"weight":21000,"compare_at_price":184600,"inventory_quantity":49,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-MBF-G01_ba692a84-32af-4e8d-9be2-d13aeb047d26.jpg?v=1710181300","\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-DCR-G00_45251-4H1014_dfba282a-2d06-497c-bc29-34508bd124c0.jpg?v=1710181302","\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-DCR-G00_45022-EG6-000_bfc8eef0-f29f-4eea-9668-18d54de064a1.jpg?v=1710181304"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-MBF-G01_ba692a84-32af-4e8d-9be2-d13aeb047d26.jpg?v=1710181300","options":["Brake Rotors","Brake Pads"],"media":[{"alt":"45020-MBF-G01 + 45251-5H11416 + 45022-AP1-000 - Rzcrewgarage","id":25428605337782,"position":1,"preview_image":{"aspect_ratio":1.499,"height":931,"width":1396,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-MBF-G01_ba692a84-32af-4e8d-9be2-d13aeb047d26.jpg?v=1710181300"},"aspect_ratio":1.499,"height":931,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-MBF-G01_ba692a84-32af-4e8d-9be2-d13aeb047d26.jpg?v=1710181300","width":1396},{"alt":"45020-MBF-G01 + 45251-5H11416 - Rzcrewgarage","id":25428605370550,"position":2,"preview_image":{"aspect_ratio":1.012,"height":690,"width":698,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-DCR-G00_45251-4H1014_dfba282a-2d06-497c-bc29-34508bd124c0.jpg?v=1710181302"},"aspect_ratio":1.012,"height":690,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-DCR-G00_45251-4H1014_dfba282a-2d06-497c-bc29-34508bd124c0.jpg?v=1710181302","width":698},{"alt":"45020-MBF-G01 + 45022-AP1-000 - Rzcrewgarage","id":25428605403318,"position":3,"preview_image":{"aspect_ratio":1.171,"height":689,"width":807,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-DCR-G00_45022-EG6-000_bfc8eef0-f29f-4eea-9668-18d54de064a1.jpg?v=1710181304"},"aspect_ratio":1.171,"height":689,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-DCR-G00_45022-EG6-000_bfc8eef0-f29f-4eea-9668-18d54de064a1.jpg?v=1710181304","width":807}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePosition: Front\u003cbr\u003eRotors Diameter: 45251-5H11416\u003cbr\u003e\u003cbr\u003eThe Spoon 4-pot caliper has been specifically designed and tested for Honda applications. Unlike other 4-pot calipers, Spoon calipers are direct fit and are designed to work with the stock brake system, including the ABS. Spoon calipers use stock Honda size brake pads, which gives users incredible flexibility in choosing pads and controlling future costs. The 4-pot calipers significantly improve both high speed braking and brake pedal feel and its consistency during track use.\u003cbr\u003eThe 4-pot design also makes pad wear more even and minimizes rotor warpage. The aluminium construction greatly reduces un-sprung weight. These benefits are achieved while maintaining a stock feel for daily driving.\u003cbr\u003eSpoon calipers are manufactured by Nissin, the OE supplier of all Honda brakes. When the S2000 was released, Spoon designed the mono-block caliper with a one piece construction and greatly improved rigidity. This has now been made available for most models of Honda.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAccord Euro R | CL7 | 2002-2008 | NA | K20A | I4\u003c!--split--\u003e"}

{"id":4593509236833,"title":"Spoon Monocoque Caliper Set - Honda - Integra type R DC5\/DC5R","handle":"spoon-monocoque-caliper-set-dc5-dc5r-45020-mbr-g01","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePosition: Front\u003cbr\u003eRotors Diameter: Stock Rotor\u003cbr\u003e\u003cbr\u003eThe Spoon 4-pot caliper has been specifically designed and tested for Honda applications. Unlike other 4-pot calipers, Spoon calipers are direct fit and are designed to work with the stock brake system, including the ABS. Spoon calipers use stock Honda size brake pads, which gives users incredible flexibility in choosing pads and controlling future costs. The 4-pot calipers significantly improve both high speed braking and brake pedal feel and its consistency during track use.\u003cbr\u003eThe 4-pot design also makes pad wear more even and minimizes rotor warpage. The aluminium construction greatly reduces un-sprung weight. These benefits are achieved while maintaining a stock feel for daily driving.\u003cbr\u003eSpoon calipers are manufactured by Nissin, the OE supplier of all Honda brakes. When the S2000 was released, Spoon designed the mono-block caliper with a one piece construction and greatly improved rigidity. This has now been made available for most models of Honda.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eIntegra type R | DC5R Zenki | 2002-2004 | NA | K20A | I4,Integra type R | DC5R Kouki | 2004-2006 | NA | K20A | I4,Integra | DC5 | 2002-2006 | NA | K20Z1 | I4\u003c!--split--\u003e","published_at":"2020-04-28T16:15:53+08:00","created_at":"2020-04-28T16:15:54+08:00","vendor":"Spoon","type":"Brake Calipers and Kits","tags":["150000x15y1z300","2002","2003","2004","2005","2006","brake-calipers-and-kits","CTA262","front","honda","integra-type-r-dc5r-kouki-2004-2006-na-k20a-i4","integra-type-r-dc5r-zenki-2002-2004-na-k20a-i4","JP1","spoon","stock-rotor","ws16"],"price":139887,"price_min":139887,"price_max":160380,"available":true,"price_varies":true,"compare_at_price":141300,"compare_at_price_min":141300,"compare_at_price_max":162000,"compare_at_price_varies":true,"variants":[{"id":32130628681825,"title":"No","option1":"No","option2":null,"option3":null,"sku":"45020-MBR-G01","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Monocoque Caliper Set - Honda - Integra type R DC5\/DC5R - No","public_title":"No","options":["No"],"price":139887,"weight":7000,"compare_at_price":141300,"inventory_quantity":49,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32130628714593,"title":"Yes","option1":"Yes","option2":null,"option3":null,"sku":"45020-MBR-G01 + 45022-AP1-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Monocoque Caliper Set - Honda - Integra type R DC5\/DC5R - Yes","public_title":"Yes","options":["Yes"],"price":160380,"weight":9000,"compare_at_price":162000,"inventory_quantity":49,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-MBF-G01_7ea12207-b2f2-44cd-8589-6aa7b84290db.jpg?v=1710191560","\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-DCR-G00_45022-EG6-000_5d3b4b72-2d69-46c9-9cfe-2a26b11b29d3.jpg?v=1710191563"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-MBF-G01_7ea12207-b2f2-44cd-8589-6aa7b84290db.jpg?v=1710191560","options":["Brake Pads"],"media":[{"alt":"45020-MBR-G01 - Rzcrewgarage","id":25428605993142,"position":1,"preview_image":{"aspect_ratio":1.499,"height":931,"width":1396,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-MBF-G01_7ea12207-b2f2-44cd-8589-6aa7b84290db.jpg?v=1710191560"},"aspect_ratio":1.499,"height":931,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-MBF-G01_7ea12207-b2f2-44cd-8589-6aa7b84290db.jpg?v=1710191560","width":1396},{"alt":"45020-MBR-G01 + 45022-AP1-000 - Rzcrewgarage","id":25428606025910,"position":2,"preview_image":{"aspect_ratio":1.171,"height":689,"width":807,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-DCR-G00_45022-EG6-000_5d3b4b72-2d69-46c9-9cfe-2a26b11b29d3.jpg?v=1710191563"},"aspect_ratio":1.171,"height":689,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-DCR-G00_45022-EG6-000_5d3b4b72-2d69-46c9-9cfe-2a26b11b29d3.jpg?v=1710191563","width":807}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePosition: Front\u003cbr\u003eRotors Diameter: Stock Rotor\u003cbr\u003e\u003cbr\u003eThe Spoon 4-pot caliper has been specifically designed and tested for Honda applications. Unlike other 4-pot calipers, Spoon calipers are direct fit and are designed to work with the stock brake system, including the ABS. Spoon calipers use stock Honda size brake pads, which gives users incredible flexibility in choosing pads and controlling future costs. The 4-pot calipers significantly improve both high speed braking and brake pedal feel and its consistency during track use.\u003cbr\u003eThe 4-pot design also makes pad wear more even and minimizes rotor warpage. The aluminium construction greatly reduces un-sprung weight. These benefits are achieved while maintaining a stock feel for daily driving.\u003cbr\u003eSpoon calipers are manufactured by Nissin, the OE supplier of all Honda brakes. When the S2000 was released, Spoon designed the mono-block caliper with a one piece construction and greatly improved rigidity. This has now been made available for most models of Honda.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eIntegra type R | DC5R Zenki | 2002-2004 | NA | K20A | I4,Integra type R | DC5R Kouki | 2004-2006 | NA | K20A | I4,Integra | DC5 | 2002-2006 | NA | K20Z1 | I4\u003c!--split--\u003e"}

{"id":410898202651,"title":"Spoon Monocoque Caliper Set - Honda - S2000 AP1\/AP2","handle":"spoon-monocoque-caliper-set-ap1-ap2-45020-mbr-g00","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePosition: Front\u003cbr\u003eRotors Diameter: Stock Rotor\u003cbr\u003e\u003cbr\u003eThe Spoon 4-pot caliper has been specifically designed and tested for Honda applications. Unlike other 4-pot calipers, Spoon calipers are direct fit and are designed to work with the stock brake system, including the ABS. Spoon calipers use stock Honda size brake pads, which gives users incredible flexibility in choosing pads and controlling future costs. The 4-pot calipers significantly improve both high speed braking and brake pedal feel and its consistency during track use.\u003cbr\u003eThe 4-pot design also makes pad wear more even and minimizes rotor warpage. The aluminium construction greatly reduces un-sprung weight. These benefits are achieved while maintaining a stock feel for daily driving.\u003cbr\u003eSpoon calipers are manufactured by Nissin, the OE supplier of all Honda brakes. When the S2000 was released, Spoon designed the mono-block caliper with a one piece construction and greatly improved rigidity. This has now been made available for most models of Honda.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eS2000 | AP1 | 1999-2003 | NA | F20C | I4,S2000 | AP2 | 2003-2009 | NA | F22C | I4\u003c!--split--\u003e","published_at":"2017-12-06T14:57:07+08:00","created_at":"2017-12-06T14:57:08+08:00","vendor":"Spoon","type":"Brake Calipers and Kits","tags":["150000x15y1z300","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","brake-calipers-and-kits","CTA262","front","honda","JP1","s2000-ap1-1999-2003-na-f20c-i4","s2000-ap2-2003-2009-na-f22c-i4","spoon","stock-rotor","ws16"],"price":139887,"price_min":139887,"price_max":160380,"available":true,"price_varies":true,"compare_at_price":141300,"compare_at_price_min":141300,"compare_at_price_max":162000,"compare_at_price_varies":true,"variants":[{"id":32130628812897,"title":"No","option1":"No","option2":null,"option3":null,"sku":"45020-MBR-G00","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Monocoque Caliper Set - Honda - S2000 AP1\/AP2 - No","public_title":"No","options":["No"],"price":139887,"weight":7000,"compare_at_price":141300,"inventory_quantity":49,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32130628878433,"title":"Yes","option1":"Yes","option2":null,"option3":null,"sku":"45020-MBR-G00 + 45022-AP1-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Monocoque Caliper Set - Honda - S2000 AP1\/AP2 - Yes","public_title":"Yes","options":["Yes"],"price":160380,"weight":9000,"compare_at_price":162000,"inventory_quantity":49,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-MBF-G01_275f3262-f29b-4e2b-ba2a-104c497a3461.jpg?v=1710149260","\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-DCR-G00_45022-EG6-000_5c7c52de-fc44-45a5-acfb-b462bae0c5e9.jpg?v=1710149262"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-MBF-G01_275f3262-f29b-4e2b-ba2a-104c497a3461.jpg?v=1710149260","options":["Brake Pads"],"media":[{"alt":"45020-MBR-G00 - Rzcrewgarage","id":25428606451894,"position":1,"preview_image":{"aspect_ratio":1.499,"height":931,"width":1396,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-MBF-G01_275f3262-f29b-4e2b-ba2a-104c497a3461.jpg?v=1710149260"},"aspect_ratio":1.499,"height":931,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-MBF-G01_275f3262-f29b-4e2b-ba2a-104c497a3461.jpg?v=1710149260","width":1396},{"alt":"45020-MBR-G00 + 45022-AP1-000 - Rzcrewgarage","id":25428606484662,"position":2,"preview_image":{"aspect_ratio":1.171,"height":689,"width":807,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-DCR-G00_45022-EG6-000_5c7c52de-fc44-45a5-acfb-b462bae0c5e9.jpg?v=1710149262"},"aspect_ratio":1.171,"height":689,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/45020-DCR-G00_45022-EG6-000_5c7c52de-fc44-45a5-acfb-b462bae0c5e9.jpg?v=1710149262","width":807}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePosition: Front\u003cbr\u003eRotors Diameter: Stock Rotor\u003cbr\u003e\u003cbr\u003eThe Spoon 4-pot caliper has been specifically designed and tested for Honda applications. Unlike other 4-pot calipers, Spoon calipers are direct fit and are designed to work with the stock brake system, including the ABS. Spoon calipers use stock Honda size brake pads, which gives users incredible flexibility in choosing pads and controlling future costs. The 4-pot calipers significantly improve both high speed braking and brake pedal feel and its consistency during track use.\u003cbr\u003eThe 4-pot design also makes pad wear more even and minimizes rotor warpage. The aluminium construction greatly reduces un-sprung weight. These benefits are achieved while maintaining a stock feel for daily driving.\u003cbr\u003eSpoon calipers are manufactured by Nissin, the OE supplier of all Honda brakes. When the S2000 was released, Spoon designed the mono-block caliper with a one piece construction and greatly improved rigidity. This has now been made available for most models of Honda.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eS2000 | AP1 | 1999-2003 | NA | F20C | I4,S2000 | AP2 | 2003-2009 | NA | F22C | I4\u003c!--split--\u003e"}

{"id":7677515956406,"title":"Spoon Reservoir Tank Cover - Honda - Universal","handle":"spoon-reservoir-tank-cover-org-90000-020","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePosition: Front\u003cbr\u003ePurpose: Reservoir tank Cover\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePrevents dirt and paint pain caused by brake fluid leakage. It is a must-have item when driving on the circuit.\u003cbr\u003e\n\n1 piece.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo,Aston Martin,Audi,Bmw,Bmw-Mini,Chevrolet,Citroen,Daihatsu,Ferrari,Fiat,Ford,Honda,Hyundai,Kia,Lexus,Lotus,Mazda,Mercedes-Benz,Mitsubishi,Nissan,Opel,Peugeot,Porsche,Renault,Seat,Skoda,Subaru,Suzuki,Toyota,Volvo,Volkswagen\u003c!--split--\u003e","published_at":"2023-10-05T08:01:16+08:00","created_at":"2023-10-05T07:59:49+08:00","vendor":"Spoon","type":"Misc","tags":["0","1800x15y1z0","1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","CTA232","front","honda","JP1","misc","reservoir-tank-cover","spoon","WS12"],"price":1700,"price_min":1700,"price_max":1700,"available":true,"price_varies":false,"compare_at_price":1700,"compare_at_price_min":1700,"compare_at_price_max":1700,"compare_at_price_varies":false,"variants":[{"id":42395674116278,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ORG-90000-020","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Reservoir Tank Cover - Honda - Universal","public_title":null,"options":["Default Title"],"price":1700,"weight":2000,"compare_at_price":1700,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/spoon-reservoir-tank-cover-honda-universal-rzcrew.jpg?v=1710314702"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/spoon-reservoir-tank-cover-honda-universal-rzcrew.jpg?v=1710314702","options":["Title"],"media":[{"alt":"Spoon Reservoir Tank Cover - ORG-90000-020 - Rzcrewgarage","id":26665460760758,"position":1,"preview_image":{"aspect_ratio":1.499,"height":683,"width":1024,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/spoon-reservoir-tank-cover-honda-universal-rzcrew.jpg?v=1710314702"},"aspect_ratio":1.499,"height":683,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/spoon-reservoir-tank-cover-honda-universal-rzcrew.jpg?v=1710314702","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePosition: Front\u003cbr\u003ePurpose: Reservoir tank Cover\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePrevents dirt and paint pain caused by brake fluid leakage. It is a must-have item when driving on the circuit.\u003cbr\u003e\n\n1 piece.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo,Aston Martin,Audi,Bmw,Bmw-Mini,Chevrolet,Citroen,Daihatsu,Ferrari,Fiat,Ford,Honda,Hyundai,Kia,Lexus,Lotus,Mazda,Mercedes-Benz,Mitsubishi,Nissan,Opel,Peugeot,Porsche,Renault,Seat,Skoda,Subaru,Suzuki,Toyota,Volvo,Volkswagen\u003c!--split--\u003e"}

{"id":1433322618977,"title":"Spoon Rigid Collar Kit - Front - Daihatsu Copen L880K","handle":"spoon-rigid-collar-kit-front-daihatsu-copen-l880k-50261-cop-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-COP-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCopen | L880K | 2002-2012 | TC | JB-DET | I4\u003c!--split--\u003e","published_at":"2018-09-23T15:24:16+08:00","created_at":"2018-09-23T15:24:17+08:00","vendor":"Spoon","type":"Collar Kits","tags":["15120x15y1z0","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","collar-kits","copen-l880k-2002-2012-tc-jb-det-i4","CTA192","daihatsu","front","JP1","L880K","rigid-collars","spoon","ws16"],"price":14157,"price_min":14157,"price_max":14157,"available":true,"price_varies":false,"compare_at_price":14300,"compare_at_price_min":14300,"compare_at_price_max":14300,"compare_at_price_varies":false,"variants":[{"id":12435579994209,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-COP-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Daihatsu Copen L880K","public_title":null,"options":["Default Title"],"price":14157,"weight":1100,"compare_at_price":14300,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_887a0054-c6a0-4c64-82a7-fd663f3f1a30.jpg?v=1710167909"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_887a0054-c6a0-4c64-82a7-fd663f3f1a30.jpg?v=1710167909","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Daihatsu Copen L880K - 50261-COP-000 - RZCrewGarage","id":22882182430902,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_887a0054-c6a0-4c64-82a7-fd663f3f1a30.jpg?v=1710167909"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_887a0054-c6a0-4c64-82a7-fd663f3f1a30.jpg?v=1710167909","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-COP-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCopen | L880K | 2002-2012 | TC | JB-DET | I4\u003c!--split--\u003e"}

{"id":1433313542241,"title":"Spoon Rigid Collar Kit - Front - Honda Civic ES1\/ES3\/FG2","handle":"spoon-rigid-collar-kit-front-honda-civic-es1-es3-fg2-50261-fd2-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-FD2-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic Ferio | ES1 | 2000-2003 | NA | D15B | I4\u003cbr\u003eCivic Ferio | ES3 | 2000-2003 | NA | D17A | I4\u003cbr\u003eCivic | FG2 | 2007-2009 | NA | K20Z3 | I4\u003c!--split--\u003e","published_at":"2018-09-23T15:17:37+08:00","created_at":"2018-09-23T15:17:38+08:00","vendor":"Spoon","type":"Collar Kits","tags":["19440x15y1z0","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","civic-ferio-es1-2000-2003-na-d15b-i4","civic-ferio-es3-2000-2003-na-d17a-i4","civic-fg2-2007-2009-na-k20z3-i4","collar-kits","CTA192","ES1\/ES3\/FG2","front","honda","JP1","rigid-collars","spoon","ws17"],"price":18032,"price_min":18032,"price_max":18032,"available":true,"price_varies":false,"compare_at_price":18400,"compare_at_price_min":18400,"compare_at_price_max":18400,"compare_at_price_varies":false,"variants":[{"id":12435568656481,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-FD2-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Honda Civic ES1\/ES3\/FG2","public_title":null,"options":["Default Title"],"price":18032,"weight":1100,"compare_at_price":18400,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_f8411773-d942-42b1-a586-8ba4a5f7fc8f.jpg?v=1710167718"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_f8411773-d942-42b1-a586-8ba4a5f7fc8f.jpg?v=1710167718","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Honda Civic ES1\/ES3\/FG2 - 50261-FD2-000 - RZCrewGarage","id":22882155331766,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_f8411773-d942-42b1-a586-8ba4a5f7fc8f.jpg?v=1710167718"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_f8411773-d942-42b1-a586-8ba4a5f7fc8f.jpg?v=1710167718","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-FD2-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCivic Ferio | ES1 | 2000-2003 | NA | D15B | I4\u003cbr\u003eCivic Ferio | ES3 | 2000-2003 | NA | D17A | I4\u003cbr\u003eCivic | FG2 | 2007-2009 | NA | K20Z3 | I4\u003c!--split--\u003e"}

{"id":1433314459745,"title":"Spoon Rigid Collar Kit - Front - Honda Fit-Jazz GD1\/GD3","handle":"spoon-rigid-collar-kit-front-honda-fit-jazz-gd1-gd3-50261-gd3-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-GD3-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eFit-Jazz | GD1 | 2001-2008 | NA | L13A | I4\u003cbr\u003eFit-Jazz | GD3 | 2001-2008 | NA | L15A | I4\u003c!--split--\u003e","published_at":"2018-09-23T15:18:20+08:00","created_at":"2018-09-23T15:18:21+08:00","vendor":"Spoon","type":"Collar Kits","tags":["19440x15y1z0","2001","2002","2003","2004","2005","2006","2007","2008","collar-kits","CTA192","fit-jazz-gd1-2001-2008-na-l13a-i4","fit-jazz-gd3-2001-2008-na-l15a-i4","front","GD1\/GD3","honda","JP1","rigid-collars","spoon","ws17"],"price":18032,"price_min":18032,"price_max":18032,"available":true,"price_varies":false,"compare_at_price":18400,"compare_at_price_min":18400,"compare_at_price_max":18400,"compare_at_price_varies":false,"variants":[{"id":12435569573985,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-GD3-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Honda Fit-Jazz GD1\/GD3","public_title":null,"options":["Default Title"],"price":18032,"weight":1100,"compare_at_price":18400,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_37959bb0-aacd-4d5d-b46c-a937fc109c32.jpg?v=1710167744"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_37959bb0-aacd-4d5d-b46c-a937fc109c32.jpg?v=1710167744","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Honda Fit-Jazz GD1\/GD3 - 50261-GD3-000 - RZCrewGarage","id":22882157592758,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_37959bb0-aacd-4d5d-b46c-a937fc109c32.jpg?v=1710167744"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_37959bb0-aacd-4d5d-b46c-a937fc109c32.jpg?v=1710167744","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-GD3-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eFit-Jazz | GD1 | 2001-2008 | NA | L13A | I4\u003cbr\u003eFit-Jazz | GD3 | 2001-2008 | NA | L15A | I4\u003c!--split--\u003e"}

{"id":1433314525281,"title":"Spoon Rigid Collar Kit - Front - Honda Fit-Jazz GD2\/GD4","handle":"spoon-rigid-collar-kit-front-honda-fit-jazz-gd2-gd4-50261-gd3-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-GD3-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eFit-Jazz | GD2 | 2001-2008 | NA | L13A | I4\u003cbr\u003eFit-Jazz | GD4 | 2001-2008 | NA | L15A | I4\u003c!--split--\u003e","published_at":"2018-09-23T15:18:23+08:00","created_at":"2018-09-23T15:18:24+08:00","vendor":"Spoon","type":"Collar Kits","tags":["19440x15y1z0","2001","2002","2003","2004","2005","2006","2007","2008","collar-kits","CTA192","fit-jazz-gd2-2001-2008-na-l13a-i4","fit-jazz-gd4-2001-2008-na-l15a-i4","front","GD2\/GD4","honda","JP1","rigid-collars","spoon","ws17"],"price":18032,"price_min":18032,"price_max":18032,"available":true,"price_varies":false,"compare_at_price":18400,"compare_at_price_min":18400,"compare_at_price_max":18400,"compare_at_price_varies":false,"variants":[{"id":12435569639521,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-GD3-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Honda Fit-Jazz GD2\/GD4","public_title":null,"options":["Default Title"],"price":18032,"weight":1100,"compare_at_price":18400,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_1a964f55-265c-42cd-90d4-f4f1ef917d54.jpg?v=1710167744"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_1a964f55-265c-42cd-90d4-f4f1ef917d54.jpg?v=1710167744","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Honda Fit-Jazz GD2\/GD4 - 50261-GD3-000 - RZCrewGarage","id":22882157658294,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_1a964f55-265c-42cd-90d4-f4f1ef917d54.jpg?v=1710167744"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_1a964f55-265c-42cd-90d4-f4f1ef917d54.jpg?v=1710167744","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-GD3-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eFit-Jazz | GD2 | 2001-2008 | NA | L13A | I4\u003cbr\u003eFit-Jazz | GD4 | 2001-2008 | NA | L15A | I4\u003c!--split--\u003e"}

{"id":1433311281249,"title":"Spoon Rigid Collar Kit - Front - Honda Insight ZE1","handle":"spoon-rigid-collar-kit-front-honda-insight-ze1-50261-ze1-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-ZE1-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eInsight | ZE1 | 1999-2006 | NA | ECA-MF2 | I3\u003c!--split--\u003e","published_at":"2018-09-23T15:15:48+08:00","created_at":"2018-09-23T15:15:49+08:00","vendor":"Spoon","type":"Collar Kits","tags":["19440x15y1z0","1999","2000","2001","2002","2003","2004","2005","2006","collar-kits","CTA192","front","honda","insight-ze1-1999-2006-na-eca-mf2-i3","JP1","rigid-collars","spoon","ws17","ZE1"],"price":18032,"price_min":18032,"price_max":18032,"available":true,"price_varies":false,"compare_at_price":18400,"compare_at_price_min":18400,"compare_at_price_max":18400,"compare_at_price_varies":false,"variants":[{"id":12435566395489,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-ZE1-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Honda Insight ZE1","public_title":null,"options":["Default Title"],"price":18032,"weight":1100,"compare_at_price":18400,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_ed7ad69c-349c-4e5e-a86b-d262698f6e51.jpg?v=1710167672"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_ed7ad69c-349c-4e5e-a86b-d262698f6e51.jpg?v=1710167672","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Honda Insight ZE1 - 50261-ZE1-000 - RZCrewGarage","id":22882147369142,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_ed7ad69c-349c-4e5e-a86b-d262698f6e51.jpg?v=1710167672"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_ed7ad69c-349c-4e5e-a86b-d262698f6e51.jpg?v=1710167672","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-ZE1-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eInsight | ZE1 | 1999-2006 | NA | ECA-MF2 | I3\u003c!--split--\u003e"}

{"id":1433311674465,"title":"Spoon Rigid Collar Kit - Front - Honda Integra DC5","handle":"spoon-rigid-collar-kit-front-honda-integra-dc5-50261-fd2-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-FD2-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eIntegra | DC5 | 2002-2006 | NA | K20Z1 | I4\u003c!--split--\u003e","published_at":"2018-09-23T15:16:10+08:00","created_at":"2018-09-23T15:16:11+08:00","vendor":"Spoon","type":"Collar Kits","tags":["19440x15y1z0","2002","2003","2004","2005","2006","collar-kits","CTA192","DC5","front","honda","integra-dc5-2002-2006-na-k20z1-i4","JP1","rigid-collars","spoon","ws17"],"price":18032,"price_min":18032,"price_max":18032,"available":true,"price_varies":false,"compare_at_price":18400,"compare_at_price_min":18400,"compare_at_price_max":18400,"compare_at_price_varies":false,"variants":[{"id":12435566788705,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-FD2-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Honda Integra DC5","public_title":null,"options":["Default Title"],"price":18032,"weight":1100,"compare_at_price":18400,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_2842bb76-14db-4451-9488-043f78f994a7.jpg?v=1710167684"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_2842bb76-14db-4451-9488-043f78f994a7.jpg?v=1710167684","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Honda Integra DC5 - 50261-FD2-000 - RZCrewGarage","id":22882148352182,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_2842bb76-14db-4451-9488-043f78f994a7.jpg?v=1710167684"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_2842bb76-14db-4451-9488-043f78f994a7.jpg?v=1710167684","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-FD2-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eIntegra | DC5 | 2002-2006 | NA | K20Z1 | I4\u003c!--split--\u003e"}

{"id":1433315442785,"title":"Spoon Rigid Collar Kit - Front - Honda Mobilio GB1","handle":"spoon-rigid-collar-kit-front-honda-mobilio-gb1-50261-gd3-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-GD3-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMobilio | GB1 | 2001-2008 | NA | L15A | I4\u003c!--split--\u003e","published_at":"2018-09-23T15:19:03+08:00","created_at":"2018-09-23T15:19:04+08:00","vendor":"Spoon","type":"Collar Kits","tags":["19440x15y1z0","2001","2002","2003","2004","2005","2006","2007","2008","collar-kits","CTA192","front","GB1","honda","JP1","mobilio-gb1-2001-2008-na-l15a-i4","rigid-collars","spoon","ws17"],"price":18032,"price_min":18032,"price_max":18032,"available":true,"price_varies":false,"compare_at_price":18400,"compare_at_price_min":18400,"compare_at_price_max":18400,"compare_at_price_varies":false,"variants":[{"id":12435570524257,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-GD3-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Honda Mobilio GB1","public_title":null,"options":["Default Title"],"price":18032,"weight":1100,"compare_at_price":18400,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_b7ec7d42-0c10-405e-b098-1a6255681354.jpg?v=1710167765"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_b7ec7d42-0c10-405e-b098-1a6255681354.jpg?v=1710167765","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Honda Mobilio GB1 - 50261-GD3-000 - RZCrewGarage","id":22882161983670,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_b7ec7d42-0c10-405e-b098-1a6255681354.jpg?v=1710167765"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_b7ec7d42-0c10-405e-b098-1a6255681354.jpg?v=1710167765","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-GD3-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMobilio | GB1 | 2001-2008 | NA | L15A | I4\u003c!--split--\u003e"}

{"id":1433315508321,"title":"Spoon Rigid Collar Kit - Front - Honda Mobilio Spike GK1","handle":"spoon-rigid-collar-kit-front-honda-mobilio-spike-gk1-50261-gd3-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-GD3-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMobilio Spike | GK1 | 2001-2008 | NA | L15A | I4\u003c!--split--\u003e","published_at":"2018-09-23T15:19:06+08:00","created_at":"2018-09-23T15:19:07+08:00","vendor":"Spoon","type":"Collar Kits","tags":["19440x15y1z0","2001","2002","2003","2004","2005","2006","2007","2008","collar-kits","CTA192","front","GK1","honda","JP1","mobilio-spike-gk1-2001-2008-na-l15a-i4","rigid-collars","spoon","ws17"],"price":18032,"price_min":18032,"price_max":18032,"available":true,"price_varies":false,"compare_at_price":18400,"compare_at_price_min":18400,"compare_at_price_max":18400,"compare_at_price_varies":false,"variants":[{"id":12435570589793,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-GD3-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Honda Mobilio Spike GK1","public_title":null,"options":["Default Title"],"price":18032,"weight":1100,"compare_at_price":18400,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_4ca550cd-6542-4bdc-97c9-e09081e63861.jpg?v=1710167765"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_4ca550cd-6542-4bdc-97c9-e09081e63861.jpg?v=1710167765","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Honda Mobilio Spike GK1 - 50261-GD3-000 - RZCrewGarage","id":22882162376886,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_4ca550cd-6542-4bdc-97c9-e09081e63861.jpg?v=1710167765"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_4ca550cd-6542-4bdc-97c9-e09081e63861.jpg?v=1710167765","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-GD3-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMobilio Spike | GK1 | 2001-2008 | NA | L15A | I4\u003c!--split--\u003e"}

{"id":1433314230369,"title":"Spoon Rigid Collar Kit - Front - Honda Stream RN3\/RN5","handle":"spoon-rigid-collar-kit-front-honda-stream-rn3-rn5-50261-fd2-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-FD2-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eStream | RN3 | 2000-2006 | NA | K20A | I4\u003cbr\u003eStream | RN5 | 2000-2006 | NA | K20B | I4\u003c!--split--\u003e","published_at":"2018-09-23T15:18:10+08:00","created_at":"2018-09-23T15:18:11+08:00","vendor":"Spoon","type":"Collar Kits","tags":["19440x15y1z0","2000","2001","2002","2003","2004","2005","2006","collar-kits","CTA192","front","honda","JP1","rigid-collars","RN3\/RN5","spoon","stream-rn3-2000-2006-na-k20a-i4","stream-rn5-2000-2006-na-k20b-i4","ws17"],"price":18032,"price_min":18032,"price_max":18032,"available":true,"price_varies":false,"compare_at_price":18400,"compare_at_price_min":18400,"compare_at_price_max":18400,"compare_at_price_varies":false,"variants":[{"id":12435569344609,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-FD2-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Honda Stream RN3\/RN5","public_title":null,"options":["Default Title"],"price":18032,"weight":1100,"compare_at_price":18400,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_6765710c-07c8-4ccb-aa79-f7a8c566caa9.jpg?v=1710167742"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_6765710c-07c8-4ccb-aa79-f7a8c566caa9.jpg?v=1710167742","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Honda Stream RN3\/RN5 - 50261-FD2-000 - RZCrewGarage","id":22882157265078,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_6765710c-07c8-4ccb-aa79-f7a8c566caa9.jpg?v=1710167742"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_6765710c-07c8-4ccb-aa79-f7a8c566caa9.jpg?v=1710167742","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-FD2-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eStream | RN3 | 2000-2006 | NA | K20A | I4\u003cbr\u003eStream | RN5 | 2000-2006 | NA | K20B | I4\u003c!--split--\u003e"}

{"id":1433309249633,"title":"Spoon Rigid Collar Kit - Front - Honda That's JD1\/JD2","handle":"spoon-rigid-collar-kit-front-honda-thats-jd1-jd2-50261-jb2-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-JB2-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eThat's | JD1 | 2002-2006 | NA | E07Z | I3\u003cbr\u003eThat's | JD2 | 2002-2006 | NA | E07Z | I3\u003c!--split--\u003e","published_at":"2018-09-23T15:14:19+08:00","created_at":"2018-09-23T15:14:20+08:00","vendor":"Spoon","type":"Collar Kits","tags":["15120x15y1z0","2002","2003","2004","2005","2006","collar-kits","CTA192","front","honda","JD1\/JD2","JP1","rigid-collars","spoon","that's-jd1-2002-2006-na-e07z-i3","that's-jd2-2002-2006-na-e07z-i3","ws16"],"price":14157,"price_min":14157,"price_max":14157,"available":true,"price_varies":false,"compare_at_price":14300,"compare_at_price_min":14300,"compare_at_price_max":14300,"compare_at_price_varies":false,"variants":[{"id":12435562102881,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-JB2-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Honda That's JD1\/JD2","public_title":null,"options":["Default Title"],"price":14157,"weight":1100,"compare_at_price":14300,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_869b8f68-8623-4188-a9dd-f882177de493.jpg?v=1710167633"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_869b8f68-8623-4188-a9dd-f882177de493.jpg?v=1710167633","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Honda That's JD1\/JD2 - 50261-JB2-000 - RZCrewGarage","id":22882139701430,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_869b8f68-8623-4188-a9dd-f882177de493.jpg?v=1710167633"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_869b8f68-8623-4188-a9dd-f882177de493.jpg?v=1710167633","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-JB2-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eThat's | JD1 | 2002-2006 | NA | E07Z | I3\u003cbr\u003eThat's | JD2 | 2002-2006 | NA | E07Z | I3\u003c!--split--\u003e"}

{"id":1433321767009,"title":"Spoon Rigid Collar Kit - Front - Mitsubishi Delica Space Gear PD6W","handle":"spoon-rigid-collar-kit-front-mitsubishi-delica-space-gear-pd6w-50261-pd6-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-PD6-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eDelica Space Gear | PD6W | 1997-2007 | TT | 6G72 | V6\u003c!--split--\u003e","published_at":"2018-09-23T15:23:41+08:00","created_at":"2018-09-23T15:23:42+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1997","1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","21600x15y1z0","collar-kits","CTA192","delica-space-gear-pd6w-1997-2007-tt-6g72-v6","front","JP1","mitsubishi","PD6W","rigid-collars","spoon","ws16"],"price":20196,"price_min":20196,"price_max":20196,"available":true,"price_varies":false,"compare_at_price":20400,"compare_at_price_min":20400,"compare_at_price_max":20400,"compare_at_price_varies":false,"variants":[{"id":12435579175009,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-PD6-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Mitsubishi Delica Space Gear PD6W","public_title":null,"options":["Default Title"],"price":20196,"weight":1100,"compare_at_price":20400,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_12d6cc81-b660-46a4-9b63-e837e1c169e5.jpg?v=1710167901"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_12d6cc81-b660-46a4-9b63-e837e1c169e5.jpg?v=1710167901","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Mitsubishi Delica Space Gear PD6W - 50261-PD6-000 - RZCrewGarage","id":22882180137142,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_12d6cc81-b660-46a4-9b63-e837e1c169e5.jpg?v=1710167901"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_12d6cc81-b660-46a4-9b63-e837e1c169e5.jpg?v=1710167901","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-PD6-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eDelica Space Gear | PD6W | 1997-2007 | TT | 6G72 | V6\u003c!--split--\u003e"}

{"id":1433318981729,"title":"Spoon Rigid Collar Kit - Front - Nissan Cube BZ11","handle":"spoon-rigid-collar-kit-front-nissan-cube-bz11-50261-y12-1000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-Y12-1000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCube | BZ11 | 2002-2005 | NA | CR14DE | I4\u003cbr\u003eCube | BZ11 | 2005-2006 | NA | CR14DE | I4\u003cbr\u003eCube | BZ11 | 2007-2008 | NA | CR14DE | I4\u003c!--split--\u003e","published_at":"2018-09-23T15:21:36+08:00","created_at":"2018-09-23T15:21:37+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2002","2003","2004","2005","2006","2007","2008","21600x15y1z0","BZ11","collar-kits","CTA192","cube-bz11-2002-2005-na-cr14de-i4","cube-bz11-2005-2006-na-cr14de-i4","cube-bz11-2007-2008-na-cr14de-i4","front","JP1","nissan","rigid-collars","spoon","ws16"],"price":20196,"price_min":20196,"price_max":20196,"available":true,"price_varies":false,"compare_at_price":20400,"compare_at_price_min":20400,"compare_at_price_max":20400,"compare_at_price_varies":false,"variants":[{"id":12435576389729,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-Y12-1000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Nissan Cube BZ11","public_title":null,"options":["Default Title"],"price":20196,"weight":1100,"compare_at_price":20400,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_4a475442-006e-4e6a-ad17-ba01f7b342c8.jpg?v=1710167838"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_4a475442-006e-4e6a-ad17-ba01f7b342c8.jpg?v=1710167838","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Nissan Cube BZ11 - 50261-Y12-1000 - RZCrewGarage","id":22882173223094,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_4a475442-006e-4e6a-ad17-ba01f7b342c8.jpg?v=1710167838"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_4a475442-006e-4e6a-ad17-ba01f7b342c8.jpg?v=1710167838","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-Y12-1000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCube | BZ11 | 2002-2005 | NA | CR14DE | I4\u003cbr\u003eCube | BZ11 | 2005-2006 | NA | CR14DE | I4\u003cbr\u003eCube | BZ11 | 2007-2008 | NA | CR14DE | I4\u003c!--split--\u003e"}

{"id":1433319866465,"title":"Spoon Rigid Collar Kit - Front - Nissan Fairlady Z Z33","handle":"spoon-rigid-collar-kit-front-nissan-fairlady-z-z33-50261-v36-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-V36-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eFairlady Z | Z33 Kouki | 2007-2008 | NA | VQ35HR | V6\u003cbr\u003eFairlady Z | Z33 Zenki | 2002-2004 | NA | VQ35DE | V6\u003cbr\u003eFairlady Z | Z33 Chuki | 2004-2005 | NA | VQ35DE | V6\u003c!--split--\u003e","published_at":"2018-09-23T15:22:16+08:00","created_at":"2018-09-23T15:22:17+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2002","2003","2004","2005","2006","2007","2008","21600x15y1z0","collar-kits","CTA192","fairlady-z-z33-chuki-2004-2005-na-vq35de-v6","fairlady-z-z33-kouki-2007-2008-na-vq35hr-v6","fairlady-z-z33-zenki-2002-2004-na-vq35de-v6","front","JP1","nissan","rigid-collars","spoon","ws16","Z33"],"price":20196,"price_min":20196,"price_max":20196,"available":true,"price_varies":false,"compare_at_price":20400,"compare_at_price_min":20400,"compare_at_price_max":20400,"compare_at_price_varies":false,"variants":[{"id":12435577274465,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-V36-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Nissan Fairlady Z Z33","public_title":null,"options":["Default Title"],"price":20196,"weight":1100,"compare_at_price":20400,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_7a733849-16b6-4889-a67e-afd076ec0ff7.jpg?v=1710167855"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_7a733849-16b6-4889-a67e-afd076ec0ff7.jpg?v=1710167855","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Nissan Fairlady Z Z33 - 50261-V36-000 - RZCrewGarage","id":22882175418550,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_7a733849-16b6-4889-a67e-afd076ec0ff7.jpg?v=1710167855"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_7a733849-16b6-4889-a67e-afd076ec0ff7.jpg?v=1710167855","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-V36-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eFairlady Z | Z33 Kouki | 2007-2008 | NA | VQ35HR | V6\u003cbr\u003eFairlady Z | Z33 Zenki | 2002-2004 | NA | VQ35DE | V6\u003cbr\u003eFairlady Z | Z33 Chuki | 2004-2005 | NA | VQ35DE | V6\u003c!--split--\u003e"}

{"id":1433318588513,"title":"Spoon Rigid Collar Kit - Front - Nissan Moco MG21S","handle":"spoon-rigid-collar-kit-front-nissan-moco-mg21s-50261-n22-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-N22-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMoco | MG21S | 2002-2004 | TC | K6A | I3\u003cbr\u003eMoco | MG21S | 2004-2006 | TC | K6A | I3\u003c!--split--\u003e","published_at":"2018-09-23T15:21:19+08:00","created_at":"2018-09-23T15:21:20+08:00","vendor":"Spoon","type":"Collar Kits","tags":["15120x15y1z0","2002","2003","2004","2005","2006","collar-kits","CTA192","front","JP1","MG21S","moco-mg21s-2002-2004-tc-k6a-i3","moco-mg21s-2004-2006-tc-k6a-i3","nissan","rigid-collars","spoon","ws16"],"price":14157,"price_min":14157,"price_max":14157,"available":true,"price_varies":false,"compare_at_price":14300,"compare_at_price_min":14300,"compare_at_price_max":14300,"compare_at_price_varies":false,"variants":[{"id":12435575996513,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-N22-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Nissan Moco MG21S","public_title":null,"options":["Default Title"],"price":14157,"weight":1100,"compare_at_price":14300,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_7c16bbaf-9ea6-48d7-8021-7930c8f7c85a.jpg?v=1710167833"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_7c16bbaf-9ea6-48d7-8021-7930c8f7c85a.jpg?v=1710167833","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Nissan Moco MG21S - 50261-N22-000 - RZCrewGarage","id":22882172305590,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_7c16bbaf-9ea6-48d7-8021-7930c8f7c85a.jpg?v=1710167833"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_7c16bbaf-9ea6-48d7-8021-7930c8f7c85a.jpg?v=1710167833","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-N22-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMoco | MG21S | 2002-2004 | TC | K6A | I3\u003cbr\u003eMoco | MG21S | 2004-2006 | TC | K6A | I3\u003c!--split--\u003e"}

{"id":1433323569249,"title":"Spoon Rigid Collar Kit - Front - Suzuki Kei HN22S","handle":"spoon-rigid-collar-kit-front-suzuki-kei-hn22s-50261-n22-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-N22-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eKei | HN22S | 1998-2009 | TC | K6A | I3\u003c!--split--\u003e","published_at":"2018-09-23T15:24:55+08:00","created_at":"2018-09-23T15:24:56+08:00","vendor":"Spoon","type":"Collar Kits","tags":["15120x15y1z0","1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","collar-kits","CTA192","front","HN22S","JP1","kei-hn22s-1998-2009-tc-k6a-i3","rigid-collars","spoon","suzuki","ws16"],"price":14157,"price_min":14157,"price_max":14157,"available":true,"price_varies":false,"compare_at_price":14300,"compare_at_price_min":14300,"compare_at_price_max":14300,"compare_at_price_varies":false,"variants":[{"id":12435581075553,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-N22-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Suzuki Kei HN22S","public_title":null,"options":["Default Title"],"price":14157,"weight":1100,"compare_at_price":14300,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_83171e7d-6daf-4f49-9370-89b9fb79ec49.jpg?v=1710167936"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_83171e7d-6daf-4f49-9370-89b9fb79ec49.jpg?v=1710167936","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Suzuki Kei HN22S - 50261-N22-000 - RZCrewGarage","id":22882184822966,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_83171e7d-6daf-4f49-9370-89b9fb79ec49.jpg?v=1710167936"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_83171e7d-6daf-4f49-9370-89b9fb79ec49.jpg?v=1710167936","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-N22-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eKei | HN22S | 1998-2009 | TC | K6A | I3\u003c!--split--\u003e"}

{"id":1433317933153,"title":"Spoon Rigid Collar Kit - Front - Toyota Celsior UCF30","handle":"spoon-rigid-collar-kit-front-toyota-celsior-ucf30-50261-uc3-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-UC3-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCelsior | UCF30 | 2000-2006 | NA | 3UZ-FE | V8\u003c!--split--\u003e","published_at":"2018-09-23T15:20:52+08:00","created_at":"2018-09-23T15:20:53+08:00","vendor":"Spoon","type":"Collar Kits","tags":["2000","2001","2002","2003","2004","2005","2006","21600x15y1z0","celsior-ucf30-2000-2006-na-3uz-fe-v8","collar-kits","CTA192","front","JP1","rigid-collars","spoon","toyota","UCF30","ws16"],"price":20196,"price_min":20196,"price_max":20196,"available":true,"price_varies":false,"compare_at_price":20400,"compare_at_price_min":20400,"compare_at_price_max":20400,"compare_at_price_varies":false,"variants":[{"id":12435575373921,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-UC3-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Toyota Celsior UCF30","public_title":null,"options":["Default Title"],"price":20196,"weight":1100,"compare_at_price":20400,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_54c0b8d5-ff14-4f8b-9c1f-15ce6352e7a0.jpg?v=1710167816"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_54c0b8d5-ff14-4f8b-9c1f-15ce6352e7a0.jpg?v=1710167816","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Toyota Celsior UCF30 - 50261-UC3-000 - RZCrewGarage","id":22882170241206,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_54c0b8d5-ff14-4f8b-9c1f-15ce6352e7a0.jpg?v=1710167816"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SPOONRC_54c0b8d5-ff14-4f8b-9c1f-15ce6352e7a0.jpg?v=1710167816","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-UC3-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCelsior | UCF30 | 2000-2006 | NA | 3UZ-FE | V8\u003c!--split--\u003e"}

{"id":6271360467126,"title":"STI - Flexible Front Tower Bar - Subaru Impreza GD2 Applied A-G (2000-2007)","handle":"sti-flexible-front-tower-bar-subaru-impreza-gd2-applied-a-g-2000-2007-st205024s001","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: STI\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003eType: Flexible\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- GD2 GD3 GD9 GDA GDB GDC GDD: For 4 Door vehicles.\u003cbr\u003e- GG2 GG3 GG9 GGA GGB GGC GGD: For 5 Door vehicles.Contrary to popular belief, having the stiffest possible suspension is not the way to optimum performance, as this may cause uneven weight distribution when cornering, leading to a considerable loss of traction. So how do we lock the struts and stiffen up the body without losing the dynamic flexing? STIs new patent pending flexible tower bar incorporates a link ball in the center, allowing the bar to flex, but still maintain lateral rigidity.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - Impreza - GD2 Applied A (2000-2001) EJ15\u003cbr\u003eSubaru - Impreza - GD2 Applied B (2001-2002) EJ15\u003cbr\u003eSubaru - Impreza - GD2 Applied C (2002-2003) EJ15\u003cbr\u003eSubaru - Impreza - GD2 Applied D (2003-2004) EJ15\u003cbr\u003eSubaru - Impreza - GD2 Applied E (2004-2005) EJ15\u003cbr\u003eSubaru - Impreza - GD2 Applied F (2005-2006) EJ15\u003cbr\u003eSubaru - Impreza - GD2 Applied G (2006-2007) EJ15\u003c!--split--\u003e","published_at":"2021-02-18T16:57:36+08:00","created_at":"2021-02-18T16:57:36+08:00","vendor":"STI","type":"Bars and Braces","tags":["2-points","2000","2001","2002","2003","2004","2005","2006","2007","30000x14y1z0","bars-and-braces","CTA457","front","impreza-gd2-applied-a-2000-2001-na-ej15-h4","impreza-gd2-applied-b-2001-2002-na-ej15-h4","impreza-gd2-applied-c-2002-2003-na-ej15-h4","impreza-gd2-applied-d-2003-2004-na-ej15-h4","impreza-gd2-applied-e-2004-2005-na-ej15-h4","impreza-gd2-applied-f-2005-2006-na-ej15-h4","impreza-gd2-applied-g-2006-2007-na-ej15-h4","sti","strut-bars","subaru","ws15"],"price":27900,"price_min":27900,"price_max":27900,"available":true,"price_varies":false,"compare_at_price":27900,"compare_at_price_min":27900,"compare_at_price_max":27900,"compare_at_price_varies":false,"variants":[{"id":38055866892470,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ST205024S001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"STI - Flexible Front Tower Bar - Subaru Impreza GD2 Applied A-G (2000-2007)","public_title":null,"options":["Default Title"],"price":27900,"weight":7000,"compare_at_price":27900,"inventory_quantity":49,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-front-tower-bar-subaru-impreza-gd2-applied-a-g-2000-2007-rzcrew.jpg?v=1710326646"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-front-tower-bar-subaru-impreza-gd2-applied-a-g-2000-2007-rzcrew.jpg?v=1710326646","options":["Title"],"media":[{"alt":"STI - Flexible Front Tower Bar - Subaru Impreza GD2 Applied A-G (2000-2007) - ST205024S001 - Rzcrewgarage","id":25433889964214,"position":1,"preview_image":{"aspect_ratio":2.174,"height":460,"width":1000,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-front-tower-bar-subaru-impreza-gd2-applied-a-g-2000-2007-rzcrew.jpg?v=1710326646"},"aspect_ratio":2.174,"height":460,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/sti-flexible-front-tower-bar-subaru-impreza-gd2-applied-a-g-2000-2007-rzcrew.jpg?v=1710326646","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: STI\u003cbr\u003ePosition: Front\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003eType: Flexible\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- GD2 GD3 GD9 GDA GDB GDC GDD: For 4 Door vehicles.\u003cbr\u003e- GG2 GG3 GG9 GGA GGB GGC GGD: For 5 Door vehicles.Contrary to popular belief, having the stiffest possible suspension is not the way to optimum performance, as this may cause uneven weight distribution when cornering, leading to a considerable loss of traction. So how do we lock the struts and stiffen up the body without losing the dynamic flexing? STIs new patent pending flexible tower bar incorporates a link ball in the center, allowing the bar to flex, but still maintain lateral rigidity.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSubaru - Impreza - GD2 Applied A (2000-2001) EJ15\u003cbr\u003eSubaru - Impreza - GD2 Applied B (2001-2002) EJ15\u003cbr\u003eSubaru - Impreza - GD2 Applied C (2002-2003) EJ15\u003cbr\u003eSubaru - Impreza - GD2 Applied D (2003-2004) EJ15\u003cbr\u003eSubaru - Impreza - GD2 Applied E (2004-2005) EJ15\u003cbr\u003eSubaru - Impreza - GD2 Applied F (2005-2006) EJ15\u003cbr\u003eSubaru - Impreza - GD2 Applied G (2006-2007) EJ15\u003c!--split--\u003e"}