{"id":456837398555,"title":"Fluidampr - Harmonic Damper - Subaru - EJ20\/22\/25","handle":"fluidampr-harmonic-damper-subaru-ej20-22-25-531101-531101","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Fluidampr\u003cbr\u003eReference Number: 531101\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eFluidampr Engine Dampers are designed to control destructive vibrations which are transfered thru the crankshaft. Each time the air\/fuel mixture inside a cylinder is ignited, the combustion that occurs creates a torque spike that is applied to the crankshaft through the piston and rod. This torque spike is so severe that it not only turns the crankshaft, it actually twists the crankshaft ahead of its normal rotation and then the crankshaft rebounds. This twisting action is known as torsional vibration. When these torque spikes and forces get into phase with the natural frequency, critical torsional harmonic vibrations occur and can be seriously destructive to the bearings and the crankshaft. Dampers are designed to control those destructive vibrations. Critical harmonic vibrations occur numerous times in a engine’s operating range. Stock rubber and elastomer-type dampers are frequency sensitive “tuned absorbers”, and work at only one critical frequency.\u003cbr\u003e\u003cbr\u003eIn the case of a stock rubber damper, it is tuned for a factory engine’s critical harmonic vibrations. If you change the mass of pistons, rods, or the crankshaft, you change the natural frequency of the crankshaft assembly; therefore, the stock damper is no longer tuned to the new frequency of vibration, and you may be headed for early failure of expensive engine components. Dampers also create heat while they work, and rubber is a poor dissipator of heat. This heat and the exposure to the elements deteriorates rubber, causing it to crack and change durometer, which then leads to inertia ring slippage, damper failure, uncontrolled torsional vibration, and costly engine parts breakage.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ22G | 2200cc | DOHC | 16v | TC | H4,EJ255 | 2500cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e","published_at":"2017-12-18T20:19:59+08:00","created_at":"2017-12-18T20:19:59+08:00","vendor":"Fluidampr","type":"Build Your Block","tags":["build-your-block","ej205-2000cc-dohc-16v-tc-h4","ej22g-2200cc-dohc-16v-tc-h4","ej255-2500cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","engine-pulleys","fluidampr","subaru","us1","ws118"],"price":63660,"price_min":63660,"price_max":63660,"available":true,"price_varies":false,"compare_at_price":74900,"compare_at_price_min":74900,"compare_at_price_max":74900,"compare_at_price_varies":false,"variants":[{"id":5337119850523,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"531101","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Fluidampr - Harmonic Damper - Subaru - EJ20\/22\/25","public_title":null,"options":["Default Title"],"price":63660,"weight":7493,"compare_at_price":74900,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/531101.jpg?v=1710153619"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/531101.jpg?v=1710153619","options":["Title"],"media":[{"alt":"Fluidampr - Harmonic Damper - Subaru - EJ20\/22\/25 - 531101 - 531101","id":22936410718390,"position":1,"preview_image":{"aspect_ratio":0.862,"height":420,"width":362,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/531101.jpg?v=1710153619"},"aspect_ratio":0.862,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/531101.jpg?v=1710153619","width":362}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Fluidampr\u003cbr\u003eReference Number: 531101\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eFluidampr Engine Dampers are designed to control destructive vibrations which are transfered thru the crankshaft. Each time the air\/fuel mixture inside a cylinder is ignited, the combustion that occurs creates a torque spike that is applied to the crankshaft through the piston and rod. This torque spike is so severe that it not only turns the crankshaft, it actually twists the crankshaft ahead of its normal rotation and then the crankshaft rebounds. This twisting action is known as torsional vibration. When these torque spikes and forces get into phase with the natural frequency, critical torsional harmonic vibrations occur and can be seriously destructive to the bearings and the crankshaft. Dampers are designed to control those destructive vibrations. Critical harmonic vibrations occur numerous times in a engine’s operating range. Stock rubber and elastomer-type dampers are frequency sensitive “tuned absorbers”, and work at only one critical frequency.\u003cbr\u003e\u003cbr\u003eIn the case of a stock rubber damper, it is tuned for a factory engine’s critical harmonic vibrations. If you change the mass of pistons, rods, or the crankshaft, you change the natural frequency of the crankshaft assembly; therefore, the stock damper is no longer tuned to the new frequency of vibration, and you may be headed for early failure of expensive engine components. Dampers also create heat while they work, and rubber is a poor dissipator of heat. This heat and the exposure to the elements deteriorates rubber, causing it to crack and change durometer, which then leads to inertia ring slippage, damper failure, uncontrolled torsional vibration, and costly engine parts breakage.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ22G | 2200cc | DOHC | 16v | TC | H4,EJ255 | 2500cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e"}

{"id":456844083227,"title":"Eagle - Conrods Set - Subaru - EJ20\/22\/25","handle":"eagle-conrods-set-subaru-ej20-22-25-crs5137s3d-crs5137s3d","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Eagle\u003cbr\u003eReference Number: CRS5137S3D\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eMade from premium, 4340 steel billet material, Brian Crower connecting rods are available in two distinct styles depending on horsepower, budget and engine application, but both include the exclusive Brian Crower oiling groove in the pin bushing for added oiling. The bROD Series is intended for moderate boost applications and all motor race applications where peak horsepower is not going to exceed 700 at the flywheel. Utilizes venerable ARP2000 fasteners. The BC625+ Series rods are designed for high horsepower, high boost and extreme rpm applications where nothing but the best rod will do. Features include ARP's premium Custom Age 625+ bolt rated to 280,000 p.s.i. for ultimate fastening capabilities as well as aluminum-bronze bushings to insure long, reliable service, no matter what the boost, nitrous or RPM.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ22G | 2200cc | DOHC | 16v | TC | H4,EJ255 | 2500cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e","published_at":"2017-12-18T20:21:15+08:00","created_at":"2017-12-18T20:21:15+08:00","vendor":"Eagle","type":"Build Your Block","tags":["build-your-block","conrods-kit","eagle","ej205-2000cc-dohc-16v-tc-h4","ej22g-2200cc-dohc-16v-tc-h4","ej255-2500cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","subaru","us1","ws17"],"price":57690,"price_min":57690,"price_max":57690,"available":true,"price_varies":false,"compare_at_price":59800,"compare_at_price_min":59800,"compare_at_price_max":59800,"compare_at_price_varies":false,"variants":[{"id":5337145245723,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CRS5137S3D","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Eagle - Conrods Set - Subaru - EJ20\/22\/25","public_title":null,"options":["Default Title"],"price":57690,"weight":6585,"compare_at_price":59800,"inventory_quantity":19,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/EAGLE_Conrod_f0759245-df67-4b7c-a958-a747222fe912.jpg?v=1710153745"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/EAGLE_Conrod_f0759245-df67-4b7c-a958-a747222fe912.jpg?v=1710153745","options":["Title"],"media":[{"alt":"Eagle - Conrods Set - Subaru - EJ20\/22\/25 - CRS5137S3D - CRS5137S3D","id":22936436179126,"position":1,"preview_image":{"aspect_ratio":2.941,"height":272,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/EAGLE_Conrod_f0759245-df67-4b7c-a958-a747222fe912.jpg?v=1710153745"},"aspect_ratio":2.941,"height":272,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/EAGLE_Conrod_f0759245-df67-4b7c-a958-a747222fe912.jpg?v=1710153745","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Eagle\u003cbr\u003eReference Number: CRS5137S3D\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eMade from premium, 4340 steel billet material, Brian Crower connecting rods are available in two distinct styles depending on horsepower, budget and engine application, but both include the exclusive Brian Crower oiling groove in the pin bushing for added oiling. The bROD Series is intended for moderate boost applications and all motor race applications where peak horsepower is not going to exceed 700 at the flywheel. Utilizes venerable ARP2000 fasteners. The BC625+ Series rods are designed for high horsepower, high boost and extreme rpm applications where nothing but the best rod will do. Features include ARP's premium Custom Age 625+ bolt rated to 280,000 p.s.i. for ultimate fastening capabilities as well as aluminum-bronze bushings to insure long, reliable service, no matter what the boost, nitrous or RPM.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ22G | 2200cc | DOHC | 16v | TC | H4,EJ255 | 2500cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e"}

{"id":456830222363,"title":"ARP - Head Stud kit (Subaru EJ205\/EJ257) 260-4701","handle":"arp-head-stud-kit-subaru-ej205-ej257-260-4701-260-4701-260-4701","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: ARP\u003cbr\u003eReference Number: 260-4701\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eWhen Building or refurbishing an Engine, Arp is the reference for performance engine. Tested to resist all abuse! Special moly-base lubricant and torque instructions are included in kit.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ22G | 2200cc | DOHC | 16v | TC | H4,EJ255 | 2500cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e","published_at":"2017-12-18T20:17:38+08:00","created_at":"2017-12-18T20:17:38+08:00","vendor":"ARP","type":"Build Your Block","tags":["arp","build-your-block","EJ20\/22\/25","ej205-2000cc-dohc-16v-tc-h4","ej22g-2200cc-dohc-16v-tc-h4","ej255-2500cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","head-studs","subaru","us1","ws127"],"price":31710,"price_min":31710,"price_max":31710,"available":true,"price_varies":false,"compare_at_price":43200,"compare_at_price_min":43200,"compare_at_price_max":43200,"compare_at_price_varies":false,"variants":[{"id":5337072402459,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"260-4701","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"ARP - Head Stud kit (Subaru EJ205\/EJ257) 260-4701","public_title":null,"options":["Default Title"],"price":31710,"weight":5814,"compare_at_price":43200,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/260-4701_e18ba175-17f7-4572-83bb-7462f6da9e5b.jpg?v=1710153516"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/260-4701_e18ba175-17f7-4572-83bb-7462f6da9e5b.jpg?v=1710153516","options":["Title"],"media":[{"alt":"ARP - Head Stud kit (Subaru EJ205\/EJ257) 260-4701 - 260-4701 - 260-4701","id":22936385716406,"position":1,"preview_image":{"aspect_ratio":1.27,"height":315,"width":400,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/260-4701_e18ba175-17f7-4572-83bb-7462f6da9e5b.jpg?v=1710153516"},"aspect_ratio":1.27,"height":315,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/260-4701_e18ba175-17f7-4572-83bb-7462f6da9e5b.jpg?v=1710153516","width":400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: ARP\u003cbr\u003eReference Number: 260-4701\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eWhen Building or refurbishing an Engine, Arp is the reference for performance engine. Tested to resist all abuse! Special moly-base lubricant and torque instructions are included in kit.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ22G | 2200cc | DOHC | 16v | TC | H4,EJ255 | 2500cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e"}

{"id":456834383899,"title":"ACL - Race Main Bearing Set For Subaru EJ20\/EJ22\/EJ25 Flange on 5th position","handle":"acl-race-main-bearing-set-for-subaru-ej20-ej22-ej25-flange-on-5th-position-5m8309h-std-5m8309h-std","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: ACL\u003cbr\u003eReference Number: 5M8309H-STD\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe unique combination of design, metallurgy and engineering come together to deliver what drivers expect from high performance Trimetal engine bearings. Acl Race remains one of the best performance bearing around! Available in:\u003cbr\u003eSTD\u003cbr\u003e.25 Tolerance for reparation\u003cbr\u003e.50 Tolerance for reparation\u003cbr\u003eHX .01 Extra Oil clearance application for high RPM\/Output engine.\u003cbr\u003e\u003cbr\u003ePlease state your requirement in the order Notes. If not stated, this product will come as STD tolerance by Default.\n\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ22G | 2200cc | DOHC | 16v | TC | H4,EJ255 | 2500cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e","published_at":"2017-12-18T20:18:56+08:00","created_at":"2017-12-18T20:18:56+08:00","vendor":"ACL","type":"Build Your Block","tags":["acl","build-your-block","ej205-2000cc-dohc-16v-tc-h4","ej22g-2200cc-dohc-16v-tc-h4","ej255-2500cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","main-bearings","subaru","us1","ws136"],"price":11790,"price_min":11790,"price_max":11790,"available":true,"price_varies":false,"compare_at_price":18200,"compare_at_price_min":18200,"compare_at_price_max":18200,"compare_at_price_varies":false,"variants":[{"id":5337096814619,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"5M8309H-STD","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"ACL - Race Main Bearing Set For Subaru EJ20\/EJ22\/EJ25 Flange on 5th position","public_title":null,"options":["Default Title"],"price":11790,"weight":4318,"compare_at_price":18200,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MainBearing_6120879b-3fba-4c27-b690-21be2ef33c0c.jpg?v=1710153574"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MainBearing_6120879b-3fba-4c27-b690-21be2ef33c0c.jpg?v=1710153574","options":["Title"],"media":[{"alt":"ACL - Race Main Bearing Set For Subaru EJ20\/EJ22\/EJ25 Flange on 5th position - 5M8309H-STD - 5M8309H-STD","id":22936401739958,"position":1,"preview_image":{"aspect_ratio":1.129,"height":443,"width":500,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MainBearing_6120879b-3fba-4c27-b690-21be2ef33c0c.jpg?v=1710153574"},"aspect_ratio":1.129,"height":443,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MainBearing_6120879b-3fba-4c27-b690-21be2ef33c0c.jpg?v=1710153574","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: ACL\u003cbr\u003eReference Number: 5M8309H-STD\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe unique combination of design, metallurgy and engineering come together to deliver what drivers expect from high performance Trimetal engine bearings. Acl Race remains one of the best performance bearing around! Available in:\u003cbr\u003eSTD\u003cbr\u003e.25 Tolerance for reparation\u003cbr\u003e.50 Tolerance for reparation\u003cbr\u003eHX .01 Extra Oil clearance application for high RPM\/Output engine.\u003cbr\u003e\u003cbr\u003ePlease state your requirement in the order Notes. If not stated, this product will come as STD tolerance by Default.\n\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ22G | 2200cc | DOHC | 16v | TC | H4,EJ255 | 2500cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e"}

{"id":6145097105590,"title":"ATI - Super Damper - Subaru - EJ20\/22\/25","handle":"ati-super-damper-subaru-ej20-22-25-917991-917991","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: ATI\u003cbr\u003eReference Number: 917991\u003cbr\u003eDiameter: 5.5\"\u003cbr\u003eWeight: 6.0 LBS\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eATI's Super Damper for Subaru WRX EJ20, EJ22 and EJ25 engines\n\u003cbr\u003eDampens torsional crankshaft vibrations at all RPM levels\n\u003cbr\u003eProtects against engine harmonics\n\u003cbr\u003eDirect replacement for the OEM unit\n\u003cbr\u003eFour-rib and five-rib serpentine belt drives\n\u003cbr\u003e5% Overdriven\n\u003cbr\u003eUtilizes factory serpentine belt set-up\n\u003cbr\u003eLaser-etched timing marks\n\u003cbr\u003eSFI 18.1 Safety Certification and are approved for competition use\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ22G | 2200cc | DOHC | 16v | TC | H4,EJ255 | 2500cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e","published_at":"2020-12-15T17:20:11+08:00","created_at":"2020-12-15T17:20:12+08:00","vendor":"ATI","type":"Build Your Block","tags":["ati","build-your-block","ej205-2000cc-dohc-16v-tc-h4","ej22g-2200cc-dohc-16v-tc-h4","ej255-2500cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","engine-pulleys","subaru","US1","ws16"],"price":53970,"price_min":53970,"price_max":53970,"available":true,"price_varies":false,"compare_at_price":54700,"compare_at_price_min":54700,"compare_at_price_max":54700,"compare_at_price_varies":false,"variants":[{"id":37712914743478,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"917991","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"ATI - Super Damper - Subaru - EJ20\/22\/25","public_title":null,"options":["Default Title"],"price":53970,"weight":7311,"compare_at_price":54700,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/ATI_Super_Damper_Pulley.jpg?v=1710195998"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/ATI_Super_Damper_Pulley.jpg?v=1710195998","options":["Title"],"media":[{"alt":"ATI - Super Damper - Subaru - EJ20\/22\/25 - 917991 - 917991","id":22936583635126,"position":1,"preview_image":{"aspect_ratio":0.911,"height":461,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/ATI_Super_Damper_Pulley.jpg?v=1710195998"},"aspect_ratio":0.911,"height":461,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/ATI_Super_Damper_Pulley.jpg?v=1710195998","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: ATI\u003cbr\u003eReference Number: 917991\u003cbr\u003eDiameter: 5.5\"\u003cbr\u003eWeight: 6.0 LBS\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eATI's Super Damper for Subaru WRX EJ20, EJ22 and EJ25 engines\n\u003cbr\u003eDampens torsional crankshaft vibrations at all RPM levels\n\u003cbr\u003eProtects against engine harmonics\n\u003cbr\u003eDirect replacement for the OEM unit\n\u003cbr\u003eFour-rib and five-rib serpentine belt drives\n\u003cbr\u003e5% Overdriven\n\u003cbr\u003eUtilizes factory serpentine belt set-up\n\u003cbr\u003eLaser-etched timing marks\n\u003cbr\u003eSFI 18.1 Safety Certification and are approved for competition use\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ22G | 2200cc | DOHC | 16v | TC | H4,EJ255 | 2500cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e"}

{"id":456830648347,"title":"ARP - Head Stud kit 625+ CUSTOM AGE (Subaru EJ205\/EJ257) 260-4704","handle":"arp-head-stud-kit-625-custom-age-subaru-ej205-ej257-260-4704-260-4704-260-4704","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: ARP\u003cbr\u003eReference Number: 260-4704\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eWhen Building or refurbishing an Engine, Arp is the reference for performance engine. All Custom Age 625+® studs are centerless ground, heat treated prior to thread rolling and machining, nominally rated at 270,000 psi. These fasteners deliver a 30% increase in tensile strength over the OEM Torque To Yield (TTY) head bolts.Tested to resist all abuse! Special moly-base lubricant and torque instructions are included in kit.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ22G | 2200cc | DOHC | 16v | TC | H4,EJ255 | 2500cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e","published_at":"2017-12-18T20:17:51+08:00","created_at":"2017-12-18T20:17:52+08:00","vendor":"ARP","type":"Build Your Block","tags":["arp","build-your-block","EJ20\/22\/25","ej205-2000cc-dohc-16v-tc-h4","ej22g-2200cc-dohc-16v-tc-h4","ej255-2500cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","head-studs","subaru","us1","ws128"],"price":80780,"price_min":80780,"price_max":80780,"available":true,"price_varies":false,"compare_at_price":110200,"compare_at_price_min":110200,"compare_at_price_max":110200,"compare_at_price_varies":false,"variants":[{"id":5337080332315,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"260-4704","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"ARP - Head Stud kit 625+ CUSTOM AGE (Subaru EJ205\/EJ257) 260-4704","public_title":null,"options":["Default Title"],"price":80780,"weight":5950,"compare_at_price":110200,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/260-4704_9d754a28-65ac-4737-aac0-59194a6f0ad7.jpg?v=1710153518"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/260-4704_9d754a28-65ac-4737-aac0-59194a6f0ad7.jpg?v=1710153518","options":["Title"],"media":[{"alt":"ARP - Head Stud kit 625+ CUSTOM AGE (Subaru EJ205\/EJ257) 260-4704 - 260-4704 - 260-4704","id":22936386732214,"position":1,"preview_image":{"aspect_ratio":1.149,"height":348,"width":400,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/260-4704_9d754a28-65ac-4737-aac0-59194a6f0ad7.jpg?v=1710153518"},"aspect_ratio":1.149,"height":348,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/260-4704_9d754a28-65ac-4737-aac0-59194a6f0ad7.jpg?v=1710153518","width":400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: ARP\u003cbr\u003eReference Number: 260-4704\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eWhen Building or refurbishing an Engine, Arp is the reference for performance engine. All Custom Age 625+® studs are centerless ground, heat treated prior to thread rolling and machining, nominally rated at 270,000 psi. These fasteners deliver a 30% increase in tensile strength over the OEM Torque To Yield (TTY) head bolts.Tested to resist all abuse! Special moly-base lubricant and torque instructions are included in kit.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ22G | 2200cc | DOHC | 16v | TC | H4,EJ255 | 2500cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e"}

{"id":7147230724278,"title":"Moroso - Subaru EJ20\/EJ22\/EJ25 Deep Wet Sump 6qt 6-15\/16in Steel Oil Pan - Subaru - EJ20\/22\/25","handle":"moroso-20966","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Moroso\u003cbr\u003eReference Number: 20966\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ22G | 2200cc | DOHC | 16v | TC | H4,EJ255 | 2500cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e","published_at":"2021-11-02T21:34:25+08:00","created_at":"2021-11-02T21:34:25+08:00","vendor":"Moroso","type":"Build Your Block","tags":["build-your-block","ej205-2000cc-dohc-16v-tc-h4","ej22g-2200cc-dohc-16v-tc-h4","ej255-2500cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","moroso","oil-sumps","subaru","US1","ws117"],"price":70830,"price_min":70830,"price_max":70830,"available":true,"price_varies":false,"compare_at_price":83100,"compare_at_price_min":83100,"compare_at_price_max":83100,"compare_at_price_varies":false,"variants":[{"id":40823330898102,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"20966","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Moroso - Subaru EJ20\/EJ22\/EJ25 Deep Wet Sump 6qt 6-15\/16in Steel Oil Pan - Subaru - EJ20\/22\/25","public_title":null,"options":["Default Title"],"price":70830,"weight":8354,"compare_at_price":83100,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":[],"featured_image":null,"options":["Title"],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Moroso\u003cbr\u003eReference Number: 20966\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ22G | 2200cc | DOHC | 16v | TC | H4,EJ255 | 2500cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e"}

{"id":7147230462134,"title":"Moroso - Toyota 2RZFE\/3RZFE Kicked Out Wet Sump 5qt 5.5in Aluminum Oil Pan - Subaru - EJ20\/22\/25","handle":"moroso-20936","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Moroso\u003cbr\u003eReference Number: 20936\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ22G | 2200cc | DOHC | 16v | TC | H4,EJ255 | 2500cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e","published_at":"2021-11-02T21:34:20+08:00","created_at":"2021-11-02T21:34:20+08:00","vendor":"Moroso","type":"Build Your Block","tags":["build-your-block","ej205-2000cc-dohc-16v-tc-h4","ej22g-2200cc-dohc-16v-tc-h4","ej255-2500cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","moroso","oil-sumps","subaru","US1","ws117"],"price":87220,"price_min":87220,"price_max":87220,"available":true,"price_varies":false,"compare_at_price":102300,"compare_at_price_min":102300,"compare_at_price_max":102300,"compare_at_price_varies":false,"variants":[{"id":40823330439350,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"20936","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Moroso - Toyota 2RZFE\/3RZFE Kicked Out Wet Sump 5qt 5.5in Aluminum Oil Pan - Subaru - EJ20\/22\/25","public_title":null,"options":["Default Title"],"price":87220,"weight":8627,"compare_at_price":102300,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":[],"featured_image":null,"options":["Title"],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Moroso\u003cbr\u003eReference Number: 20936\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ22G | 2200cc | DOHC | 16v | TC | H4,EJ255 | 2500cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e"}

{"id":7147230691510,"title":"Moroso - Subaru EJ20\/EJ22\/EJ25 Road Race Baffled Wet Sump 5qt .125in Thick Aluminum Oil Pan - Subaru - EJ20\/22\/25","handle":"moroso-20965","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Moroso\u003cbr\u003eReference Number: 20965\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 1 left in stock!\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ22G | 2200cc | DOHC | 16v | TC | H4,EJ255 | 2500cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e","published_at":"2021-11-02T21:34:24+08:00","created_at":"2021-11-02T21:34:25+08:00","vendor":"Moroso","type":"Build Your Block","tags":["build-your-block","ej205-2000cc-dohc-16v-tc-h4","ej22g-2200cc-dohc-16v-tc-h4","ej255-2500cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","moroso","oil-sumps","subaru","US1","ws117"],"price":134090,"price_min":134090,"price_max":134090,"available":true,"price_varies":false,"compare_at_price":157300,"compare_at_price_min":157300,"compare_at_price_max":157300,"compare_at_price_varies":false,"variants":[{"id":40823330832566,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"20965","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Moroso - Subaru EJ20\/EJ22\/EJ25 Road Race Baffled Wet Sump 5qt .125in Thick Aluminum Oil Pan - Subaru - EJ20\/22\/25","public_title":null,"options":["Default Title"],"price":134090,"weight":9579,"compare_at_price":157300,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":[],"featured_image":null,"options":["Title"],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Moroso\u003cbr\u003eReference Number: 20965\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 1 left in stock!\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ22G | 2200cc | DOHC | 16v | TC | H4,EJ255 | 2500cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e"}

{"id":7147230658742,"title":"Moroso - Mitsubishi 2.0L DOHC Turbo 4G63 Kicked Out Road Race Baffled 6.25qt 6.5in Aluminum Oil Pan - Subaru - EJ20\/22\/25","handle":"moroso-20960","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Moroso\u003cbr\u003eReference Number: 20960\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ22G | 2200cc | DOHC | 16v | TC | H4,EJ255 | 2500cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e","published_at":"2021-11-02T21:34:24+08:00","created_at":"2021-11-02T21:34:24+08:00","vendor":"Moroso","type":"Build Your Block","tags":["build-your-block","ej205-2000cc-dohc-16v-tc-h4","ej22g-2200cc-dohc-16v-tc-h4","ej255-2500cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","moroso","oil-sumps","subaru","US1","ws117"],"price":108580,"price_min":108580,"price_max":108580,"available":true,"price_varies":false,"compare_at_price":127300,"compare_at_price_min":127300,"compare_at_price_max":127300,"compare_at_price_varies":false,"variants":[{"id":40823330799798,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"20960","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Moroso - Mitsubishi 2.0L DOHC Turbo 4G63 Kicked Out Road Race Baffled 6.25qt 6.5in Aluminum Oil Pan - Subaru - EJ20\/22\/25","public_title":null,"options":["Default Title"],"price":108580,"weight":9352,"compare_at_price":127300,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":[],"featured_image":null,"options":["Title"],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Moroso\u003cbr\u003eReference Number: 20960\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ22G | 2200cc | DOHC | 16v | TC | H4,EJ255 | 2500cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e"}

{"id":7147230494902,"title":"Moroso - Toyota 2RZFE\/3RZFE Kicked Out w\/-16An Pick Up Wet Sump 5qt 5.5in Aluminum Oil Pan - Subaru - EJ20\/22\/25","handle":"moroso-20937","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Moroso\u003cbr\u003eReference Number: 20937\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ22G | 2200cc | DOHC | 16v | TC | H4,EJ255 | 2500cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e","published_at":"2021-11-02T21:34:21+08:00","created_at":"2021-11-02T21:34:21+08:00","vendor":"Moroso","type":"Build Your Block","tags":["build-your-block","ej205-2000cc-dohc-16v-tc-h4","ej22g-2200cc-dohc-16v-tc-h4","ej255-2500cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","moroso","oil-sumps","subaru","US1","ws117"],"price":91150,"price_min":91150,"price_max":91150,"available":true,"price_varies":false,"compare_at_price":106900,"compare_at_price_min":106900,"compare_at_price_max":106900,"compare_at_price_varies":false,"variants":[{"id":40823330504886,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"20937","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Moroso - Toyota 2RZFE\/3RZFE Kicked Out w\/-16An Pick Up Wet Sump 5qt 5.5in Aluminum Oil Pan - Subaru - EJ20\/22\/25","public_title":null,"options":["Default Title"],"price":91150,"weight":8627,"compare_at_price":106900,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":[],"featured_image":null,"options":["Title"],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Moroso\u003cbr\u003eReference Number: 20937\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eEJ205 | 2000cc | DOHC | 16v | TC | H4,EJ22G | 2200cc | DOHC | 16v | TC | H4,EJ255 | 2500cc | DOHC | 16v | TC | H4,EJ257 | 2500cc | DOHC | 16v | TC | H4\u003c!--split--\u003e"}

{"id":7038920687798,"title":"King Subaru EJ20\/EJ22\/EJ25 Housing Bore +.005 Main Bearing Set","handle":"king-subaru-ej20-ej22-ej25-housing-bore-005-main-bearing-set-mb5740xpg-026","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: King Bearings\u003cbr\u003eReference Number: MB5740XPG.026\u003cbr\u003eNotes: Give your engine the winning edge with King XP-Series coated rod bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote nano-composite coating takes protection to the next level without adding any additional thickness! These high performance race bearing sets are available for fitment on a wide range of specific vehicle applications.\u003cbr\u003e\u003cbr\u003e\n\npMaxKote provides:\u003cbr\u003e\n* Superior seizure resistance\u003cbr\u003e\n* Superior cavitation resistance\u003cbr\u003e\n* Superior wear resistance\u003cbr\u003e\n* Superior protection against oil starvation \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eKing XP \u0026amp; XPC race bearings have already led to new records on the race track. King’s ability to meet the continuously changing and challenging demands of the racing industry with our unique materials and geometric features are a testament to the quality and reliability of our bearings, and reinforces our commitment to developing the ultimate race bearings.\u003cbr\u003e\u003cbr\u003e\n\nThe King Racing line contains engine bearingsfor various segments. Equipped with advanced materials and construction techniques, King Racing bearings extend the limits of power, performance and durability.\u003cbr\u003e\u003cbr\u003eTo achieve the right clearance, they compensate for bearing thickness inconsistencies by grinding cranks “fat” or “thin”, adjusting the housing bore, or purchasing multiple sets to “fish” for shells. The process is time consuming, costly and tedious.\nKing listened to its engine building customers and responded with Bull’s Eye Tolerance™\u003cbr\u003e\u003cbr\u003e\n\nBull’s Eye Tolerance™ is a production technology developed by King. It combines highly accurate machining, overplating, and computerized wall thickness monitoring that adjusts the process on-the-spot.\u003cbr\u003e\n\nBull’s Eye Tolerance™ outperforms the industry’s wall thickness tolerance, ensuring the least thickness variation shell-to-shell. The outcome: A new standard in bearing thickness consistency.\u003cbr\u003e\u003cbr\u003e\n\nWith Bull’s Eye Tolerance™:\u003cbr\u003e\n\n• No more multiple set purchases or “fishing” for bearings to reach right clearance\u003cbr\u003e\n• No need to grind cranks “fat” or “thin”\u003cbr\u003e\n• No need to adjust housing diameter\u003cbr\u003e\n• Less taper across the bearing face\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.king-catalog.com\/Catalog\/Set\/MB5740XPG\" target=\"_blank\"\u003eCheck Fitment here\u003c\/a\u003e\u003c!--split--\u003ehttp:\/\/www.king-catalog.com\/Catalog\/Set\/MB5740XPG","published_at":"2021-09-20T01:47:37+08:00","created_at":"2021-09-20T01:47:38+08:00","vendor":"King Bearings","type":"Build Your Block","tags":["build-your-block","ej205-2000cc-dohc-16v-tc-h4","ej22g-2200cc-dohc-16v-tc-h4","ej255-2500cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","king-bearings","main-bearings","subaru","US1","ws131"],"price":24820,"price_min":24820,"price_max":24820,"available":true,"price_varies":false,"compare_at_price":31600,"compare_at_price_min":31600,"compare_at_price_max":31600,"compare_at_price_varies":false,"variants":[{"id":40606435344566,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MB5740XPG.026","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"King Subaru EJ20\/EJ22\/EJ25 Housing Bore +.005 Main Bearing Set","public_title":null,"options":["Default Title"],"price":24820,"weight":4363,"compare_at_price":31600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-housing-bore-005-main-bearing-set-rzcrew.jpg?v=1710323255"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-housing-bore-005-main-bearing-set-rzcrew.jpg?v=1710323255","options":["Title"],"media":[{"alt":"King Subaru EJ20\/EJ22\/EJ25 Housing Bore +.005 Main Bearing Set - MB5740XPG.026","id":22325999829174,"position":1,"preview_image":{"aspect_ratio":1.5,"height":3456,"width":5184,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-housing-bore-005-main-bearing-set-rzcrew.jpg?v=1710323255"},"aspect_ratio":1.5,"height":3456,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-housing-bore-005-main-bearing-set-rzcrew.jpg?v=1710323255","width":5184}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: King Bearings\u003cbr\u003eReference Number: MB5740XPG.026\u003cbr\u003eNotes: Give your engine the winning edge with King XP-Series coated rod bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote nano-composite coating takes protection to the next level without adding any additional thickness! These high performance race bearing sets are available for fitment on a wide range of specific vehicle applications.\u003cbr\u003e\u003cbr\u003e\n\npMaxKote provides:\u003cbr\u003e\n* Superior seizure resistance\u003cbr\u003e\n* Superior cavitation resistance\u003cbr\u003e\n* Superior wear resistance\u003cbr\u003e\n* Superior protection against oil starvation \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eKing XP \u0026amp; XPC race bearings have already led to new records on the race track. King’s ability to meet the continuously changing and challenging demands of the racing industry with our unique materials and geometric features are a testament to the quality and reliability of our bearings, and reinforces our commitment to developing the ultimate race bearings.\u003cbr\u003e\u003cbr\u003e\n\nThe King Racing line contains engine bearingsfor various segments. Equipped with advanced materials and construction techniques, King Racing bearings extend the limits of power, performance and durability.\u003cbr\u003e\u003cbr\u003eTo achieve the right clearance, they compensate for bearing thickness inconsistencies by grinding cranks “fat” or “thin”, adjusting the housing bore, or purchasing multiple sets to “fish” for shells. The process is time consuming, costly and tedious.\nKing listened to its engine building customers and responded with Bull’s Eye Tolerance™\u003cbr\u003e\u003cbr\u003e\n\nBull’s Eye Tolerance™ is a production technology developed by King. It combines highly accurate machining, overplating, and computerized wall thickness monitoring that adjusts the process on-the-spot.\u003cbr\u003e\n\nBull’s Eye Tolerance™ outperforms the industry’s wall thickness tolerance, ensuring the least thickness variation shell-to-shell. The outcome: A new standard in bearing thickness consistency.\u003cbr\u003e\u003cbr\u003e\n\nWith Bull’s Eye Tolerance™:\u003cbr\u003e\n\n• No more multiple set purchases or “fishing” for bearings to reach right clearance\u003cbr\u003e\n• No need to grind cranks “fat” or “thin”\u003cbr\u003e\n• No need to adjust housing diameter\u003cbr\u003e\n• Less taper across the bearing face\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.king-catalog.com\/Catalog\/Set\/MB5740XPG\" target=\"_blank\"\u003eCheck Fitment here\u003c\/a\u003e\u003c!--split--\u003ehttp:\/\/www.king-catalog.com\/Catalog\/Set\/MB5740XPG"}

{"id":7038921113782,"title":"King Subaru EJ20\/EJ22\/EJ25 Housing Bore + .002 (Size .026mm) Main Bearing Set","handle":"king-subaru-ej20-ej22-ej25-housing-bore-002-size-026mm-main-bearing-set-mb5739xpg-026","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: King Bearings\u003cbr\u003eReference Number: MB5739XPG.026\u003cbr\u003eNotes: Give your engine the winning edge with King XP-Series coated rod bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote nano-composite coating takes protection to the next level without adding any additional thickness! These high performance race bearing sets are available for fitment on a wide range of specific vehicle applications.\u003cbr\u003e\u003cbr\u003e\n\npMaxKote provides:\u003cbr\u003e\n* Superior seizure resistance\u003cbr\u003e\n* Superior cavitation resistance\u003cbr\u003e\n* Superior wear resistance\u003cbr\u003e\n* Superior protection against oil starvation \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eKing XP \u0026amp; XPC race bearings have already led to new records on the race track. King’s ability to meet the continuously changing and challenging demands of the racing industry with our unique materials and geometric features are a testament to the quality and reliability of our bearings, and reinforces our commitment to developing the ultimate race bearings.\u003cbr\u003e\u003cbr\u003e\n\nThe King Racing line contains engine bearingsfor various segments. Equipped with advanced materials and construction techniques, King Racing bearings extend the limits of power, performance and durability.\u003cbr\u003e\u003cbr\u003eTo achieve the right clearance, they compensate for bearing thickness inconsistencies by grinding cranks “fat” or “thin”, adjusting the housing bore, or purchasing multiple sets to “fish” for shells. The process is time consuming, costly and tedious.\nKing listened to its engine building customers and responded with Bull’s Eye Tolerance™\u003cbr\u003e\u003cbr\u003e\n\nBull’s Eye Tolerance™ is a production technology developed by King. It combines highly accurate machining, overplating, and computerized wall thickness monitoring that adjusts the process on-the-spot.\u003cbr\u003e\n\nBull’s Eye Tolerance™ outperforms the industry’s wall thickness tolerance, ensuring the least thickness variation shell-to-shell. The outcome: A new standard in bearing thickness consistency.\u003cbr\u003e\u003cbr\u003e\n\nWith Bull’s Eye Tolerance™:\u003cbr\u003e\n\n• No more multiple set purchases or “fishing” for bearings to reach right clearance\u003cbr\u003e\n• No need to grind cranks “fat” or “thin”\u003cbr\u003e\n• No need to adjust housing diameter\u003cbr\u003e\n• Less taper across the bearing face\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.king-catalog.com\/Catalog\/Set\/MB5739XPG\" target=\"_blank\"\u003eCheck Fitment here\u003c\/a\u003e\u003c!--split--\u003ehttp:\/\/www.king-catalog.com\/Catalog\/Set\/MB5739XPG","published_at":"2021-09-20T01:47:44+08:00","created_at":"2021-09-20T01:47:45+08:00","vendor":"King Bearings","type":"Build Your Block","tags":["build-your-block","ej205-2000cc-dohc-16v-tc-h4","ej22g-2200cc-dohc-16v-tc-h4","ej255-2500cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","king-bearings","main-bearings","subaru","US1","ws131"],"price":24260,"price_min":24260,"price_max":24260,"available":true,"price_varies":false,"compare_at_price":30900,"compare_at_price_min":30900,"compare_at_price_max":30900,"compare_at_price_varies":false,"variants":[{"id":40606435606710,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MB5739XPG.026","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"King Subaru EJ20\/EJ22\/EJ25 Housing Bore + .002 (Size .026mm) Main Bearing Set","public_title":null,"options":["Default Title"],"price":24260,"weight":4363,"compare_at_price":30900,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-housing-bore-002-size-026mm-main-bearing-set-rzcrew.jpg?v=1710323255"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-housing-bore-002-size-026mm-main-bearing-set-rzcrew.jpg?v=1710323255","options":["Title"],"media":[{"alt":"King Subaru EJ20\/EJ22\/EJ25 Housing Bore + .002 (Size .026mm) Main Bearing Set - MB5739XPG.026","id":22326000844982,"position":1,"preview_image":{"aspect_ratio":1.5,"height":3456,"width":5184,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-housing-bore-002-size-026mm-main-bearing-set-rzcrew.jpg?v=1710323255"},"aspect_ratio":1.5,"height":3456,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-housing-bore-002-size-026mm-main-bearing-set-rzcrew.jpg?v=1710323255","width":5184}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: King Bearings\u003cbr\u003eReference Number: MB5739XPG.026\u003cbr\u003eNotes: Give your engine the winning edge with King XP-Series coated rod bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote nano-composite coating takes protection to the next level without adding any additional thickness! These high performance race bearing sets are available for fitment on a wide range of specific vehicle applications.\u003cbr\u003e\u003cbr\u003e\n\npMaxKote provides:\u003cbr\u003e\n* Superior seizure resistance\u003cbr\u003e\n* Superior cavitation resistance\u003cbr\u003e\n* Superior wear resistance\u003cbr\u003e\n* Superior protection against oil starvation \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eKing XP \u0026amp; XPC race bearings have already led to new records on the race track. King’s ability to meet the continuously changing and challenging demands of the racing industry with our unique materials and geometric features are a testament to the quality and reliability of our bearings, and reinforces our commitment to developing the ultimate race bearings.\u003cbr\u003e\u003cbr\u003e\n\nThe King Racing line contains engine bearingsfor various segments. Equipped with advanced materials and construction techniques, King Racing bearings extend the limits of power, performance and durability.\u003cbr\u003e\u003cbr\u003eTo achieve the right clearance, they compensate for bearing thickness inconsistencies by grinding cranks “fat” or “thin”, adjusting the housing bore, or purchasing multiple sets to “fish” for shells. The process is time consuming, costly and tedious.\nKing listened to its engine building customers and responded with Bull’s Eye Tolerance™\u003cbr\u003e\u003cbr\u003e\n\nBull’s Eye Tolerance™ is a production technology developed by King. It combines highly accurate machining, overplating, and computerized wall thickness monitoring that adjusts the process on-the-spot.\u003cbr\u003e\n\nBull’s Eye Tolerance™ outperforms the industry’s wall thickness tolerance, ensuring the least thickness variation shell-to-shell. The outcome: A new standard in bearing thickness consistency.\u003cbr\u003e\u003cbr\u003e\n\nWith Bull’s Eye Tolerance™:\u003cbr\u003e\n\n• No more multiple set purchases or “fishing” for bearings to reach right clearance\u003cbr\u003e\n• No need to grind cranks “fat” or “thin”\u003cbr\u003e\n• No need to adjust housing diameter\u003cbr\u003e\n• Less taper across the bearing face\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.king-catalog.com\/Catalog\/Set\/MB5739XPG\" target=\"_blank\"\u003eCheck Fitment here\u003c\/a\u003e\u003c!--split--\u003ehttp:\/\/www.king-catalog.com\/Catalog\/Set\/MB5739XPG"}

{"id":7038921081014,"title":"King Subaru EJ20\/EJ22\/EJ25 Housing Bore + .002 (Size STDX) Main Bearing Set","handle":"king-subaru-ej20-ej22-ej25-housing-bore-002-size-stdx-main-bearing-set-mb5739xpgstdx","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: King Bearings\u003cbr\u003eReference Number: MB5739XPGSTDX\u003cbr\u003eNotes: Give your engine the winning edge with King XP-Series coated rod bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote nano-composite coating takes protection to the next level without adding any additional thickness! These high performance race bearing sets are available for fitment on a wide range of specific vehicle applications.\u003cbr\u003e\u003cbr\u003e\n\npMaxKote provides:\u003cbr\u003e\n* Superior seizure resistance\u003cbr\u003e\n* Superior cavitation resistance\u003cbr\u003e\n* Superior wear resistance\u003cbr\u003e\n* Superior protection against oil starvation \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eKing XP \u0026amp; XPC race bearings have already led to new records on the race track. King’s ability to meet the continuously changing and challenging demands of the racing industry with our unique materials and geometric features are a testament to the quality and reliability of our bearings, and reinforces our commitment to developing the ultimate race bearings.\u003cbr\u003e\u003cbr\u003e\n\nThe King Racing line contains engine bearingsfor various segments. Equipped with advanced materials and construction techniques, King Racing bearings extend the limits of power, performance and durability.\u003cbr\u003e\u003cbr\u003eTo achieve the right clearance, they compensate for bearing thickness inconsistencies by grinding cranks “fat” or “thin”, adjusting the housing bore, or purchasing multiple sets to “fish” for shells. The process is time consuming, costly and tedious.\nKing listened to its engine building customers and responded with Bull’s Eye Tolerance™\u003cbr\u003e\u003cbr\u003e\n\nBull’s Eye Tolerance™ is a production technology developed by King. It combines highly accurate machining, overplating, and computerized wall thickness monitoring that adjusts the process on-the-spot.\u003cbr\u003e\n\nBull’s Eye Tolerance™ outperforms the industry’s wall thickness tolerance, ensuring the least thickness variation shell-to-shell. The outcome: A new standard in bearing thickness consistency.\u003cbr\u003e\u003cbr\u003e\n\nWith Bull’s Eye Tolerance™:\u003cbr\u003e\n\n• No more multiple set purchases or “fishing” for bearings to reach right clearance\u003cbr\u003e\n• No need to grind cranks “fat” or “thin”\u003cbr\u003e\n• No need to adjust housing diameter\u003cbr\u003e\n• Less taper across the bearing face\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.king-catalog.com\/Catalog\/Set\/MB5739XPG\" target=\"_blank\"\u003eCheck Fitment here\u003c\/a\u003e\u003c!--split--\u003ehttp:\/\/www.king-catalog.com\/Catalog\/Set\/MB5739XPG","published_at":"2021-09-20T01:47:42+08:00","created_at":"2021-09-20T01:47:43+08:00","vendor":"King Bearings","type":"Build Your Block","tags":["build-your-block","ej205-2000cc-dohc-16v-tc-h4","ej22g-2200cc-dohc-16v-tc-h4","ej255-2500cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","king-bearings","main-bearings","subaru","US1","ws131"],"price":24260,"price_min":24260,"price_max":24260,"available":true,"price_varies":false,"compare_at_price":30900,"compare_at_price_min":30900,"compare_at_price_max":30900,"compare_at_price_varies":false,"variants":[{"id":40606435573942,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MB5739XPGSTDX","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"King Subaru EJ20\/EJ22\/EJ25 Housing Bore + .002 (Size STDX) Main Bearing Set","public_title":null,"options":["Default Title"],"price":24260,"weight":4363,"compare_at_price":30900,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-housing-bore-002-size-stdx-main-bearing-set-rzcrew.jpg?v=1710323255"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-housing-bore-002-size-stdx-main-bearing-set-rzcrew.jpg?v=1710323255","options":["Title"],"media":[{"alt":"King Subaru EJ20\/EJ22\/EJ25 Housing Bore + .002 (Size STDX) Main Bearing Set - MB5739XPGSTDX","id":22326000517302,"position":1,"preview_image":{"aspect_ratio":1.5,"height":3456,"width":5184,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-housing-bore-002-size-stdx-main-bearing-set-rzcrew.jpg?v=1710323255"},"aspect_ratio":1.5,"height":3456,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-housing-bore-002-size-stdx-main-bearing-set-rzcrew.jpg?v=1710323255","width":5184}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: King Bearings\u003cbr\u003eReference Number: MB5739XPGSTDX\u003cbr\u003eNotes: Give your engine the winning edge with King XP-Series coated rod bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote nano-composite coating takes protection to the next level without adding any additional thickness! These high performance race bearing sets are available for fitment on a wide range of specific vehicle applications.\u003cbr\u003e\u003cbr\u003e\n\npMaxKote provides:\u003cbr\u003e\n* Superior seizure resistance\u003cbr\u003e\n* Superior cavitation resistance\u003cbr\u003e\n* Superior wear resistance\u003cbr\u003e\n* Superior protection against oil starvation \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eKing XP \u0026amp; XPC race bearings have already led to new records on the race track. King’s ability to meet the continuously changing and challenging demands of the racing industry with our unique materials and geometric features are a testament to the quality and reliability of our bearings, and reinforces our commitment to developing the ultimate race bearings.\u003cbr\u003e\u003cbr\u003e\n\nThe King Racing line contains engine bearingsfor various segments. Equipped with advanced materials and construction techniques, King Racing bearings extend the limits of power, performance and durability.\u003cbr\u003e\u003cbr\u003eTo achieve the right clearance, they compensate for bearing thickness inconsistencies by grinding cranks “fat” or “thin”, adjusting the housing bore, or purchasing multiple sets to “fish” for shells. The process is time consuming, costly and tedious.\nKing listened to its engine building customers and responded with Bull’s Eye Tolerance™\u003cbr\u003e\u003cbr\u003e\n\nBull’s Eye Tolerance™ is a production technology developed by King. It combines highly accurate machining, overplating, and computerized wall thickness monitoring that adjusts the process on-the-spot.\u003cbr\u003e\n\nBull’s Eye Tolerance™ outperforms the industry’s wall thickness tolerance, ensuring the least thickness variation shell-to-shell. The outcome: A new standard in bearing thickness consistency.\u003cbr\u003e\u003cbr\u003e\n\nWith Bull’s Eye Tolerance™:\u003cbr\u003e\n\n• No more multiple set purchases or “fishing” for bearings to reach right clearance\u003cbr\u003e\n• No need to grind cranks “fat” or “thin”\u003cbr\u003e\n• No need to adjust housing diameter\u003cbr\u003e\n• Less taper across the bearing face\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.king-catalog.com\/Catalog\/Set\/MB5739XPG\" target=\"_blank\"\u003eCheck Fitment here\u003c\/a\u003e\u003c!--split--\u003ehttp:\/\/www.king-catalog.com\/Catalog\/Set\/MB5739XPG"}

{"id":7038920818870,"title":"King Subaru EJ20\/EJ22\/EJ25 (Including Turbo) Performance Rod Bearing (Set of 4)","handle":"king-subaru-ej20-ej22-ej25-including-turbo-performance-rod-bearing-set-of-4-cr4125cp","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: King Bearings\u003cbr\u003eReference Number: CR4125CP\u003cbr\u003eNotes: Traditional tri-metal copper based material, equivalent to SAE-794. For medium load engines.\u003cbr\u003e\u003cbr\u003eKing XP \u0026amp; XPC race bearings have already led to new records on the race track. King’s ability to meet the continuously changing and challenging demands of the racing industry with our unique materials and geometric features are a testament to the quality and reliability of our bearings, and reinforces our commitment to developing the ultimate race bearings.\u003cbr\u003e\u003cbr\u003e\n\nThe King Racing line contains engine bearingsfor various segments. Equipped with advanced materials and construction techniques, King Racing bearings extend the limits of power, performance and durability.\u003cbr\u003e\u003cbr\u003eTo achieve the right clearance, they compensate for bearing thickness inconsistencies by grinding cranks “fat” or “thin”, adjusting the housing bore, or purchasing multiple sets to “fish” for shells. The process is time consuming, costly and tedious.\nKing listened to its engine building customers and responded with Bull’s Eye Tolerance™\u003cbr\u003e\u003cbr\u003e\n\nBull’s Eye Tolerance™ is a production technology developed by King. It combines highly accurate machining, overplating, and computerized wall thickness monitoring that adjusts the process on-the-spot.\u003cbr\u003e\n\nBull’s Eye Tolerance™ outperforms the industry’s wall thickness tolerance, ensuring the least thickness variation shell-to-shell. The outcome: A new standard in bearing thickness consistency.\u003cbr\u003e\u003cbr\u003e\n\nWith Bull’s Eye Tolerance™:\u003cbr\u003e\n\n• No more multiple set purchases or “fishing” for bearings to reach right clearance\u003cbr\u003e\n• No need to grind cranks “fat” or “thin”\u003cbr\u003e\n• No need to adjust housing diameter\u003cbr\u003e\n• Less taper across the bearing face\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.king-catalog.com\/Catalog\/Set\/CR4125CP\" target=\"_blank\"\u003eCheck Fitment here\u003c\/a\u003e\u003c!--split--\u003ehttp:\/\/www.king-catalog.com\/Catalog\/Set\/CR4125CP","published_at":"2021-09-20T01:47:39+08:00","created_at":"2021-09-20T01:47:40+08:00","vendor":"King Bearings","type":"Build Your Block","tags":["build-your-block","ej205-2000cc-dohc-16v-tc-h4","ej22g-2200cc-dohc-16v-tc-h4","ej255-2500cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","king-bearings","rod-bearings","subaru","US1","ws130"],"price":4350,"price_min":4350,"price_max":4350,"available":true,"price_varies":false,"compare_at_price":5500,"compare_at_price_min":5500,"compare_at_price_max":5500,"compare_at_price_varies":false,"variants":[{"id":40606435410102,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CR4125CP","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"King Subaru EJ20\/EJ22\/EJ25 (Including Turbo) Performance Rod Bearing (Set of 4)","public_title":null,"options":["Default Title"],"price":4350,"weight":4145,"compare_at_price":5500,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-including-turbo-performance-rod-bearing-set-of-4-rzcrew.jpg?v=1710323255"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-including-turbo-performance-rod-bearing-set-of-4-rzcrew.jpg?v=1710323255","options":["Title"],"media":[{"alt":"King Subaru EJ20\/EJ22\/EJ25 (Including Turbo) Performance Rod Bearing (Set of 4) - CR4125CP","id":22325999927478,"position":1,"preview_image":{"aspect_ratio":1.243,"height":1287,"width":1600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-including-turbo-performance-rod-bearing-set-of-4-rzcrew.jpg?v=1710323255"},"aspect_ratio":1.243,"height":1287,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-including-turbo-performance-rod-bearing-set-of-4-rzcrew.jpg?v=1710323255","width":1600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: King Bearings\u003cbr\u003eReference Number: CR4125CP\u003cbr\u003eNotes: Traditional tri-metal copper based material, equivalent to SAE-794. For medium load engines.\u003cbr\u003e\u003cbr\u003eKing XP \u0026amp; XPC race bearings have already led to new records on the race track. King’s ability to meet the continuously changing and challenging demands of the racing industry with our unique materials and geometric features are a testament to the quality and reliability of our bearings, and reinforces our commitment to developing the ultimate race bearings.\u003cbr\u003e\u003cbr\u003e\n\nThe King Racing line contains engine bearingsfor various segments. Equipped with advanced materials and construction techniques, King Racing bearings extend the limits of power, performance and durability.\u003cbr\u003e\u003cbr\u003eTo achieve the right clearance, they compensate for bearing thickness inconsistencies by grinding cranks “fat” or “thin”, adjusting the housing bore, or purchasing multiple sets to “fish” for shells. The process is time consuming, costly and tedious.\nKing listened to its engine building customers and responded with Bull’s Eye Tolerance™\u003cbr\u003e\u003cbr\u003e\n\nBull’s Eye Tolerance™ is a production technology developed by King. It combines highly accurate machining, overplating, and computerized wall thickness monitoring that adjusts the process on-the-spot.\u003cbr\u003e\n\nBull’s Eye Tolerance™ outperforms the industry’s wall thickness tolerance, ensuring the least thickness variation shell-to-shell. The outcome: A new standard in bearing thickness consistency.\u003cbr\u003e\u003cbr\u003e\n\nWith Bull’s Eye Tolerance™:\u003cbr\u003e\n\n• No more multiple set purchases or “fishing” for bearings to reach right clearance\u003cbr\u003e\n• No need to grind cranks “fat” or “thin”\u003cbr\u003e\n• No need to adjust housing diameter\u003cbr\u003e\n• Less taper across the bearing face\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.king-catalog.com\/Catalog\/Set\/CR4125CP\" target=\"_blank\"\u003eCheck Fitment here\u003c\/a\u003e\u003c!--split--\u003ehttp:\/\/www.king-catalog.com\/Catalog\/Set\/CR4125CP"}

{"id":7038920360118,"title":"King Subaru EJ20\/EJ22\/EJ25 (Including Turbo) 0.5 Oversize AM-Series Main Bearing (Set of 5)","handle":"king-subaru-ej20-ej22-ej25-including-turbo-0-5-oversize-am-series-main-bearing-set-of-5-mb5382am0-5","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: King Bearings\u003cbr\u003eReference Number: MB5382AM0.5\u003cbr\u003eNotes: Standard aluminum based material, equivalent to SAE-783, used for low and medium load engines.\u003cbr\u003e\u003cbr\u003eKing Engine Bearings was founded in 1960 with one simple objective: to supply the highest quality bearings available in the marketplace. By specializing in engine bearings, King has built an extensive product offering that includes a wide range of engine bearings for automobiles, light duty and heavy duty trucks, marine, aviation, standby power and many other types of internal combustion engines. Every King bearing utilizes the highest quality materials and the most advanced designs to ensure complete customer satisfaction. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.king-catalog.com\/Catalog\/Set\/MB5382AM\" target=\"_blank\"\u003eCheck Fitment here\u003c\/a\u003e\u003c!--split--\u003ehttp:\/\/www.king-catalog.com\/Catalog\/Set\/MB5382AM","published_at":"2021-09-20T01:47:30+08:00","created_at":"2021-09-20T01:47:34+08:00","vendor":"King Bearings","type":"Build Your Block","tags":["build-your-block","ej205-2000cc-dohc-16v-tc-h4","ej22g-2200cc-dohc-16v-tc-h4","ej255-2500cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","king-bearings","main-bearings","subaru","US1","ws131"],"price":6670,"price_min":6670,"price_max":6670,"available":true,"price_varies":false,"compare_at_price":8500,"compare_at_price_min":8500,"compare_at_price_max":8500,"compare_at_price_varies":false,"variants":[{"id":40606435147958,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MB5382AM0.5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"King Subaru EJ20\/EJ22\/EJ25 (Including Turbo) 0.5 Oversize AM-Series Main Bearing (Set of 5)","public_title":null,"options":["Default Title"],"price":6670,"weight":4454,"compare_at_price":8500,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-including-turbo-0-5-oversize-am-series-main-bearing-set-of-5-rzcrew.jpg?v=1710323256"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-including-turbo-0-5-oversize-am-series-main-bearing-set-of-5-rzcrew.jpg?v=1710323256","options":["Title"],"media":[{"alt":"King Subaru EJ20\/EJ22\/EJ25 (Including Turbo) 0.5 Oversize AM-Series Main Bearing (Set of 5) - MB5382AM0.5","id":22325999403190,"position":1,"preview_image":{"aspect_ratio":1.187,"height":1011,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-including-turbo-0-5-oversize-am-series-main-bearing-set-of-5-rzcrew.jpg?v=1710323256"},"aspect_ratio":1.187,"height":1011,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-including-turbo-0-5-oversize-am-series-main-bearing-set-of-5-rzcrew.jpg?v=1710323256","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: King Bearings\u003cbr\u003eReference Number: MB5382AM0.5\u003cbr\u003eNotes: Standard aluminum based material, equivalent to SAE-783, used for low and medium load engines.\u003cbr\u003e\u003cbr\u003eKing Engine Bearings was founded in 1960 with one simple objective: to supply the highest quality bearings available in the marketplace. By specializing in engine bearings, King has built an extensive product offering that includes a wide range of engine bearings for automobiles, light duty and heavy duty trucks, marine, aviation, standby power and many other types of internal combustion engines. Every King bearing utilizes the highest quality materials and the most advanced designs to ensure complete customer satisfaction. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.king-catalog.com\/Catalog\/Set\/MB5382AM\" target=\"_blank\"\u003eCheck Fitment here\u003c\/a\u003e\u003c!--split--\u003ehttp:\/\/www.king-catalog.com\/Catalog\/Set\/MB5382AM"}

{"id":7038920523958,"title":"King Subaru EJ20\/EJ22\/EJ25 - (Size STDX) Performance Tri Metal Bearing Set","handle":"king-subaru-ej20-ej22-ej25-size-stdx-performance-tri-metal-bearing-set-mb5740xpgstdx","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: King Bearings\u003cbr\u003eReference Number: MB5740XPGSTDX\u003cbr\u003eNotes: Give your engine the winning edge with King XP-Series coated rod bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote nano-composite coating takes protection to the next level without adding any additional thickness! These high performance race bearing sets are available for fitment on a wide range of specific vehicle applications.\u003cbr\u003e\u003cbr\u003e\n\npMaxKote provides:\u003cbr\u003e\n* Superior seizure resistance\u003cbr\u003e\n* Superior cavitation resistance\u003cbr\u003e\n* Superior wear resistance\u003cbr\u003e\n* Superior protection against oil starvation \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eKing XP \u0026amp; XPC race bearings have already led to new records on the race track. King’s ability to meet the continuously changing and challenging demands of the racing industry with our unique materials and geometric features are a testament to the quality and reliability of our bearings, and reinforces our commitment to developing the ultimate race bearings.\u003cbr\u003e\u003cbr\u003e\n\nThe King Racing line contains engine bearingsfor various segments. Equipped with advanced materials and construction techniques, King Racing bearings extend the limits of power, performance and durability.\u003cbr\u003e\u003cbr\u003eTo achieve the right clearance, they compensate for bearing thickness inconsistencies by grinding cranks “fat” or “thin”, adjusting the housing bore, or purchasing multiple sets to “fish” for shells. The process is time consuming, costly and tedious.\nKing listened to its engine building customers and responded with Bull’s Eye Tolerance™\u003cbr\u003e\u003cbr\u003e\n\nBull’s Eye Tolerance™ is a production technology developed by King. It combines highly accurate machining, overplating, and computerized wall thickness monitoring that adjusts the process on-the-spot.\u003cbr\u003e\n\nBull’s Eye Tolerance™ outperforms the industry’s wall thickness tolerance, ensuring the least thickness variation shell-to-shell. The outcome: A new standard in bearing thickness consistency.\u003cbr\u003e\u003cbr\u003e\n\nWith Bull’s Eye Tolerance™:\u003cbr\u003e\n\n• No more multiple set purchases or “fishing” for bearings to reach right clearance\u003cbr\u003e\n• No need to grind cranks “fat” or “thin”\u003cbr\u003e\n• No need to adjust housing diameter\u003cbr\u003e\n• Less taper across the bearing face\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.king-catalog.com\/Catalog\/Set\/MB5740XPG\" target=\"_blank\"\u003eCheck Fitment here\u003c\/a\u003e\u003c!--split--\u003ehttp:\/\/www.king-catalog.com\/Catalog\/Set\/MB5740XPG","published_at":"2021-09-20T01:47:35+08:00","created_at":"2021-09-20T01:47:36+08:00","vendor":"King Bearings","type":"Build Your Block","tags":["build-your-block","ej205-2000cc-dohc-16v-tc-h4","ej22g-2200cc-dohc-16v-tc-h4","ej255-2500cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","king-bearings","main-bearings","subaru","US1","ws131"],"price":24820,"price_min":24820,"price_max":24820,"available":true,"price_varies":false,"compare_at_price":31600,"compare_at_price_min":31600,"compare_at_price_max":31600,"compare_at_price_varies":false,"variants":[{"id":40606435311798,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MB5740XPGSTDX","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"King Subaru EJ20\/EJ22\/EJ25 - (Size STDX) Performance Tri Metal Bearing Set","public_title":null,"options":["Default Title"],"price":24820,"weight":4363,"compare_at_price":31600,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-size-stdx-performance-tri-metal-bearing-set-rzcrew.jpg?v=1710323256"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-size-stdx-performance-tri-metal-bearing-set-rzcrew.jpg?v=1710323256","options":["Title"],"media":[{"alt":"King Subaru EJ20\/EJ22\/EJ25 - (Size STDX) Performance Tri Metal Bearing Set - MB5740XPGSTDX","id":22325999632566,"position":1,"preview_image":{"aspect_ratio":1.5,"height":3456,"width":5184,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-size-stdx-performance-tri-metal-bearing-set-rzcrew.jpg?v=1710323256"},"aspect_ratio":1.5,"height":3456,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-size-stdx-performance-tri-metal-bearing-set-rzcrew.jpg?v=1710323256","width":5184}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: King Bearings\u003cbr\u003eReference Number: MB5740XPGSTDX\u003cbr\u003eNotes: Give your engine the winning edge with King XP-Series coated rod bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote nano-composite coating takes protection to the next level without adding any additional thickness! These high performance race bearing sets are available for fitment on a wide range of specific vehicle applications.\u003cbr\u003e\u003cbr\u003e\n\npMaxKote provides:\u003cbr\u003e\n* Superior seizure resistance\u003cbr\u003e\n* Superior cavitation resistance\u003cbr\u003e\n* Superior wear resistance\u003cbr\u003e\n* Superior protection against oil starvation \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eKing XP \u0026amp; XPC race bearings have already led to new records on the race track. King’s ability to meet the continuously changing and challenging demands of the racing industry with our unique materials and geometric features are a testament to the quality and reliability of our bearings, and reinforces our commitment to developing the ultimate race bearings.\u003cbr\u003e\u003cbr\u003e\n\nThe King Racing line contains engine bearingsfor various segments. Equipped with advanced materials and construction techniques, King Racing bearings extend the limits of power, performance and durability.\u003cbr\u003e\u003cbr\u003eTo achieve the right clearance, they compensate for bearing thickness inconsistencies by grinding cranks “fat” or “thin”, adjusting the housing bore, or purchasing multiple sets to “fish” for shells. The process is time consuming, costly and tedious.\nKing listened to its engine building customers and responded with Bull’s Eye Tolerance™\u003cbr\u003e\u003cbr\u003e\n\nBull’s Eye Tolerance™ is a production technology developed by King. It combines highly accurate machining, overplating, and computerized wall thickness monitoring that adjusts the process on-the-spot.\u003cbr\u003e\n\nBull’s Eye Tolerance™ outperforms the industry’s wall thickness tolerance, ensuring the least thickness variation shell-to-shell. The outcome: A new standard in bearing thickness consistency.\u003cbr\u003e\u003cbr\u003e\n\nWith Bull’s Eye Tolerance™:\u003cbr\u003e\n\n• No more multiple set purchases or “fishing” for bearings to reach right clearance\u003cbr\u003e\n• No need to grind cranks “fat” or “thin”\u003cbr\u003e\n• No need to adjust housing diameter\u003cbr\u003e\n• Less taper across the bearing face\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.king-catalog.com\/Catalog\/Set\/MB5740XPG\" target=\"_blank\"\u003eCheck Fitment here\u003c\/a\u003e\u003c!--split--\u003ehttp:\/\/www.king-catalog.com\/Catalog\/Set\/MB5740XPG"}

{"id":7038918295734,"title":"King Subaru EJ20\/EJ22\/EJ25 Housing Bore + .005 (Size 0.25) Main Bearing Set","handle":"king-subaru-ej20-ej22-ej25-housing-bore-005-size-0-25-main-bearing-set-mb5740xpg0-25","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: King Bearings\u003cbr\u003eReference Number: MB5740XPG0.25\u003cbr\u003eNotes: Give your engine the winning edge with King XP-Series coated rod bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote nano-composite coating takes protection to the next level without adding any additional thickness! These high performance race bearing sets are available for fitment on a wide range of specific vehicle applications.\u003cbr\u003e\u003cbr\u003e\n\npMaxKote provides:\u003cbr\u003e\n* Superior seizure resistance\u003cbr\u003e\n* Superior cavitation resistance\u003cbr\u003e\n* Superior wear resistance\u003cbr\u003e\n* Superior protection against oil starvation \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eKing XP \u0026amp; XPC race bearings have already led to new records on the race track. King’s ability to meet the continuously changing and challenging demands of the racing industry with our unique materials and geometric features are a testament to the quality and reliability of our bearings, and reinforces our commitment to developing the ultimate race bearings.\u003cbr\u003e\u003cbr\u003e\n\nThe King Racing line contains engine bearingsfor various segments. Equipped with advanced materials and construction techniques, King Racing bearings extend the limits of power, performance and durability.\u003cbr\u003e\u003cbr\u003eTo achieve the right clearance, they compensate for bearing thickness inconsistencies by grinding cranks “fat” or “thin”, adjusting the housing bore, or purchasing multiple sets to “fish” for shells. The process is time consuming, costly and tedious.\nKing listened to its engine building customers and responded with Bull’s Eye Tolerance™\u003cbr\u003e\u003cbr\u003e\n\nBull’s Eye Tolerance™ is a production technology developed by King. It combines highly accurate machining, overplating, and computerized wall thickness monitoring that adjusts the process on-the-spot.\u003cbr\u003e\n\nBull’s Eye Tolerance™ outperforms the industry’s wall thickness tolerance, ensuring the least thickness variation shell-to-shell. The outcome: A new standard in bearing thickness consistency.\u003cbr\u003e\u003cbr\u003e\n\nWith Bull’s Eye Tolerance™:\u003cbr\u003e\n\n• No more multiple set purchases or “fishing” for bearings to reach right clearance\u003cbr\u003e\n• No need to grind cranks “fat” or “thin”\u003cbr\u003e\n• No need to adjust housing diameter\u003cbr\u003e\n• Less taper across the bearing face\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.king-catalog.com\/Catalog\/Set\/MB5740XPG\" target=\"_blank\"\u003eCheck Fitment here\u003c\/a\u003e\u003c!--split--\u003ehttp:\/\/www.king-catalog.com\/Catalog\/Set\/MB5740XPG","published_at":"2021-09-20T01:46:23+08:00","created_at":"2021-09-20T01:46:24+08:00","vendor":"King Bearings","type":"Build Your Block","tags":["build-your-block","ej205-2000cc-dohc-16v-tc-h4","ej22g-2200cc-dohc-16v-tc-h4","ej255-2500cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","king-bearings","main-bearings","subaru","US1","ws131"],"price":23640,"price_min":23640,"price_max":23640,"available":true,"price_varies":false,"compare_at_price":30100,"compare_at_price_min":30100,"compare_at_price_max":30100,"compare_at_price_varies":false,"variants":[{"id":40606428725430,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MB5740XPG0.25","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"King Subaru EJ20\/EJ22\/EJ25 Housing Bore + .005 (Size 0.25) Main Bearing Set","public_title":null,"options":["Default Title"],"price":23640,"weight":4408,"compare_at_price":30100,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-housing-bore-005-size-0-25-main-bearing-set-rzcrew.jpg?v=1710323270"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-housing-bore-005-size-0-25-main-bearing-set-rzcrew.jpg?v=1710323270","options":["Title"],"media":[{"alt":"King Subaru EJ20\/EJ22\/EJ25 Housing Bore + .005 (Size 0.25) Main Bearing Set - MB5740XPG0.25","id":22325987705014,"position":1,"preview_image":{"aspect_ratio":1.5,"height":3456,"width":5184,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-housing-bore-005-size-0-25-main-bearing-set-rzcrew.jpg?v=1710323270"},"aspect_ratio":1.5,"height":3456,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-housing-bore-005-size-0-25-main-bearing-set-rzcrew.jpg?v=1710323270","width":5184}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: King Bearings\u003cbr\u003eReference Number: MB5740XPG0.25\u003cbr\u003eNotes: Give your engine the winning edge with King XP-Series coated rod bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote nano-composite coating takes protection to the next level without adding any additional thickness! These high performance race bearing sets are available for fitment on a wide range of specific vehicle applications.\u003cbr\u003e\u003cbr\u003e\n\npMaxKote provides:\u003cbr\u003e\n* Superior seizure resistance\u003cbr\u003e\n* Superior cavitation resistance\u003cbr\u003e\n* Superior wear resistance\u003cbr\u003e\n* Superior protection against oil starvation \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eKing XP \u0026amp; XPC race bearings have already led to new records on the race track. King’s ability to meet the continuously changing and challenging demands of the racing industry with our unique materials and geometric features are a testament to the quality and reliability of our bearings, and reinforces our commitment to developing the ultimate race bearings.\u003cbr\u003e\u003cbr\u003e\n\nThe King Racing line contains engine bearingsfor various segments. Equipped with advanced materials and construction techniques, King Racing bearings extend the limits of power, performance and durability.\u003cbr\u003e\u003cbr\u003eTo achieve the right clearance, they compensate for bearing thickness inconsistencies by grinding cranks “fat” or “thin”, adjusting the housing bore, or purchasing multiple sets to “fish” for shells. The process is time consuming, costly and tedious.\nKing listened to its engine building customers and responded with Bull’s Eye Tolerance™\u003cbr\u003e\u003cbr\u003e\n\nBull’s Eye Tolerance™ is a production technology developed by King. It combines highly accurate machining, overplating, and computerized wall thickness monitoring that adjusts the process on-the-spot.\u003cbr\u003e\n\nBull’s Eye Tolerance™ outperforms the industry’s wall thickness tolerance, ensuring the least thickness variation shell-to-shell. The outcome: A new standard in bearing thickness consistency.\u003cbr\u003e\u003cbr\u003e\n\nWith Bull’s Eye Tolerance™:\u003cbr\u003e\n\n• No more multiple set purchases or “fishing” for bearings to reach right clearance\u003cbr\u003e\n• No need to grind cranks “fat” or “thin”\u003cbr\u003e\n• No need to adjust housing diameter\u003cbr\u003e\n• Less taper across the bearing face\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.king-catalog.com\/Catalog\/Set\/MB5740XPG\" target=\"_blank\"\u003eCheck Fitment here\u003c\/a\u003e\u003c!--split--\u003ehttp:\/\/www.king-catalog.com\/Catalog\/Set\/MB5740XPG"}

{"id":7038918262966,"title":"King Subaru EJ20\/EJ22\/EJ25 (Incl. Turbo) (Size 0.25) pMaxBlack Coated Main Bearing Set","handle":"king-subaru-ej20-ej22-ej25-incl-turbo-size-0-25-pmaxblack-coated-main-bearing-set-mb5382xpgc0-25","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: King Bearings\u003cbr\u003eReference Number: MB5382XPGC0.25\u003cbr\u003eNotes: Give your engine the winning edge with King XP-Series coated rod bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote nano-composite coating takes protection to the next level without adding any additional thickness! These high performance race bearing sets are available for fitment on a wide range of specific vehicle applications.\u003cbr\u003e\u003cbr\u003e\n\npMaxKote provides:\u003cbr\u003e\n* Superior seizure resistance\u003cbr\u003e\n* Superior cavitation resistance\u003cbr\u003e\n* Superior wear resistance\u003cbr\u003e\n* Superior protection against oil starvation \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eKing XP \u0026amp; XPC race bearings have already led to new records on the race track. King’s ability to meet the continuously changing and challenging demands of the racing industry with our unique materials and geometric features are a testament to the quality and reliability of our bearings, and reinforces our commitment to developing the ultimate race bearings.\u003cbr\u003e\u003cbr\u003e\n\nThe King Racing line contains engine bearingsfor various segments. Equipped with advanced materials and construction techniques, King Racing bearings extend the limits of power, performance and durability.\u003cbr\u003e\u003cbr\u003eTo achieve the right clearance, they compensate for bearing thickness inconsistencies by grinding cranks “fat” or “thin”, adjusting the housing bore, or purchasing multiple sets to “fish” for shells. The process is time consuming, costly and tedious.\nKing listened to its engine building customers and responded with Bull’s Eye Tolerance™\u003cbr\u003e\u003cbr\u003e\n\nBull’s Eye Tolerance™ is a production technology developed by King. It combines highly accurate machining, overplating, and computerized wall thickness monitoring that adjusts the process on-the-spot.\u003cbr\u003e\n\nBull’s Eye Tolerance™ outperforms the industry’s wall thickness tolerance, ensuring the least thickness variation shell-to-shell. The outcome: A new standard in bearing thickness consistency.\u003cbr\u003e\u003cbr\u003e\n\nWith Bull’s Eye Tolerance™:\u003cbr\u003e\n\n• No more multiple set purchases or “fishing” for bearings to reach right clearance\u003cbr\u003e\n• No need to grind cranks “fat” or “thin”\u003cbr\u003e\n• No need to adjust housing diameter\u003cbr\u003e\n• Less taper across the bearing face\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.king-catalog.com\/Catalog\/Set\/MB5382XPGC\" target=\"_blank\"\u003eCheck Fitment here\u003c\/a\u003e\u003c!--split--\u003ehttp:\/\/www.king-catalog.com\/Catalog\/Set\/MB5382XPGC","published_at":"2021-09-20T01:46:21+08:00","created_at":"2021-09-20T01:46:22+08:00","vendor":"King Bearings","type":"Build Your Block","tags":["build-your-block","ej205-2000cc-dohc-16v-tc-h4","ej22g-2200cc-dohc-16v-tc-h4","ej255-2500cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","king-bearings","main-bearings","subaru","US1","ws131"],"price":23090,"price_min":23090,"price_max":23090,"available":true,"price_varies":false,"compare_at_price":29400,"compare_at_price_min":29400,"compare_at_price_max":29400,"compare_at_price_varies":false,"variants":[{"id":40606428659894,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MB5382XPGC0.25","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"King Subaru EJ20\/EJ22\/EJ25 (Incl. Turbo) (Size 0.25) pMaxBlack Coated Main Bearing Set","public_title":null,"options":["Default Title"],"price":23090,"weight":4363,"compare_at_price":29400,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-incl-turbo-size-0-25-pmaxblack-coated-main-bearing-set-rzcrew.jpg?v=1710323270"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-incl-turbo-size-0-25-pmaxblack-coated-main-bearing-set-rzcrew.jpg?v=1710323270","options":["Title"],"media":[{"alt":"King Subaru EJ20\/EJ22\/EJ25 (Incl. Turbo) (Size 0.25) pMaxBlack Coated Main Bearing Set - MB5382XPGC0.25","id":22325987410102,"position":1,"preview_image":{"aspect_ratio":1.5,"height":3456,"width":5184,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-incl-turbo-size-0-25-pmaxblack-coated-main-bearing-set-rzcrew.jpg?v=1710323270"},"aspect_ratio":1.5,"height":3456,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-incl-turbo-size-0-25-pmaxblack-coated-main-bearing-set-rzcrew.jpg?v=1710323270","width":5184}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: King Bearings\u003cbr\u003eReference Number: MB5382XPGC0.25\u003cbr\u003eNotes: Give your engine the winning edge with King XP-Series coated rod bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote nano-composite coating takes protection to the next level without adding any additional thickness! These high performance race bearing sets are available for fitment on a wide range of specific vehicle applications.\u003cbr\u003e\u003cbr\u003e\n\npMaxKote provides:\u003cbr\u003e\n* Superior seizure resistance\u003cbr\u003e\n* Superior cavitation resistance\u003cbr\u003e\n* Superior wear resistance\u003cbr\u003e\n* Superior protection against oil starvation \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eKing XP \u0026amp; XPC race bearings have already led to new records on the race track. King’s ability to meet the continuously changing and challenging demands of the racing industry with our unique materials and geometric features are a testament to the quality and reliability of our bearings, and reinforces our commitment to developing the ultimate race bearings.\u003cbr\u003e\u003cbr\u003e\n\nThe King Racing line contains engine bearingsfor various segments. Equipped with advanced materials and construction techniques, King Racing bearings extend the limits of power, performance and durability.\u003cbr\u003e\u003cbr\u003eTo achieve the right clearance, they compensate for bearing thickness inconsistencies by grinding cranks “fat” or “thin”, adjusting the housing bore, or purchasing multiple sets to “fish” for shells. The process is time consuming, costly and tedious.\nKing listened to its engine building customers and responded with Bull’s Eye Tolerance™\u003cbr\u003e\u003cbr\u003e\n\nBull’s Eye Tolerance™ is a production technology developed by King. It combines highly accurate machining, overplating, and computerized wall thickness monitoring that adjusts the process on-the-spot.\u003cbr\u003e\n\nBull’s Eye Tolerance™ outperforms the industry’s wall thickness tolerance, ensuring the least thickness variation shell-to-shell. The outcome: A new standard in bearing thickness consistency.\u003cbr\u003e\u003cbr\u003e\n\nWith Bull’s Eye Tolerance™:\u003cbr\u003e\n\n• No more multiple set purchases or “fishing” for bearings to reach right clearance\u003cbr\u003e\n• No need to grind cranks “fat” or “thin”\u003cbr\u003e\n• No need to adjust housing diameter\u003cbr\u003e\n• Less taper across the bearing face\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.king-catalog.com\/Catalog\/Set\/MB5382XPGC\" target=\"_blank\"\u003eCheck Fitment here\u003c\/a\u003e\u003c!--split--\u003ehttp:\/\/www.king-catalog.com\/Catalog\/Set\/MB5382XPGC"}

{"id":7038918164662,"title":"King Subaru EJ20\/EJ22\/EJ25 (Incl. Turbo) (Size 0.25) Main Bearing Set","handle":"king-subaru-ej20-ej22-ej25-incl-turbo-size-0-25-main-bearing-set-mb5382si0-25","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: King Bearings\u003cbr\u003eReference Number: MB5382SI0.25\u003cbr\u003eNotes: Aluminum based material, strengthen by 2.5-3% silicon, for medium load engines or nodular cast iron crankshafts. (bimetal (aluminum silicon base))\u003cbr\u003e\u003cbr\u003eKing Engine Bearings was founded in 1960 with one simple objective: to supply the highest quality bearings available in the marketplace. By specializing in engine bearings, King has built an extensive product offering that includes a wide range of engine bearings for automobiles, light duty and heavy duty trucks, marine, aviation, standby power and many other types of internal combustion engines. Every King bearing utilizes the highest quality materials and the most advanced designs to ensure complete customer satisfaction. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.king-catalog.com\/Catalog\/Set\/MB5382SI\" target=\"_blank\"\u003eCheck Fitment here\u003c\/a\u003e\u003c!--split--\u003ehttp:\/\/www.king-catalog.com\/Catalog\/Set\/MB5382SI","published_at":"2021-09-20T01:46:18+08:00","created_at":"2021-09-20T01:46:19+08:00","vendor":"King Bearings","type":"Build Your Block","tags":["build-your-block","ej205-2000cc-dohc-16v-tc-h4","ej22g-2200cc-dohc-16v-tc-h4","ej255-2500cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","king-bearings","main-bearings","subaru","US1","ws131"],"price":6660,"price_min":6660,"price_max":6660,"available":true,"price_varies":false,"compare_at_price":8500,"compare_at_price_min":8500,"compare_at_price_max":8500,"compare_at_price_varies":false,"variants":[{"id":40606428233910,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MB5382SI0.25","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"King Subaru EJ20\/EJ22\/EJ25 (Incl. Turbo) (Size 0.25) Main Bearing Set","public_title":null,"options":["Default Title"],"price":6660,"weight":4318,"compare_at_price":8500,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-incl-turbo-size-0-25-main-bearing-set-rzcrew.jpg?v=1710323272"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-incl-turbo-size-0-25-main-bearing-set-rzcrew.jpg?v=1710323272","options":["Title"],"media":[{"alt":"King Subaru EJ20\/EJ22\/EJ25 (Incl. Turbo) (Size 0.25) Main Bearing Set - MB5382SI0.25","id":22325986754742,"position":1,"preview_image":{"aspect_ratio":1.187,"height":1011,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-incl-turbo-size-0-25-main-bearing-set-rzcrew.jpg?v=1710323272"},"aspect_ratio":1.187,"height":1011,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-incl-turbo-size-0-25-main-bearing-set-rzcrew.jpg?v=1710323272","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: King Bearings\u003cbr\u003eReference Number: MB5382SI0.25\u003cbr\u003eNotes: Aluminum based material, strengthen by 2.5-3% silicon, for medium load engines or nodular cast iron crankshafts. (bimetal (aluminum silicon base))\u003cbr\u003e\u003cbr\u003eKing Engine Bearings was founded in 1960 with one simple objective: to supply the highest quality bearings available in the marketplace. By specializing in engine bearings, King has built an extensive product offering that includes a wide range of engine bearings for automobiles, light duty and heavy duty trucks, marine, aviation, standby power and many other types of internal combustion engines. Every King bearing utilizes the highest quality materials and the most advanced designs to ensure complete customer satisfaction. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.king-catalog.com\/Catalog\/Set\/MB5382SI\" target=\"_blank\"\u003eCheck Fitment here\u003c\/a\u003e\u003c!--split--\u003ehttp:\/\/www.king-catalog.com\/Catalog\/Set\/MB5382SI"}

{"id":7038918820022,"title":"King Subaru EJ20\/EJ22\/EJ25 .005 Oversized Tri-Metal Perf Main Bearing Set","handle":"king-subaru-ej20-ej22-ej25-005-oversized-tri-metal-perf-main-bearing-set-mb5740xpg","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: King Bearings\u003cbr\u003eReference Number: MB5740XPG\u003cbr\u003eNotes: Give your engine the winning edge with King XP-Series coated rod bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote nano-composite coating takes protection to the next level without adding any additional thickness! These high performance race bearing sets are available for fitment on a wide range of specific vehicle applications.\u003cbr\u003e\u003cbr\u003e\n\npMaxKote provides:\u003cbr\u003e\n* Superior seizure resistance\u003cbr\u003e\n* Superior cavitation resistance\u003cbr\u003e\n* Superior wear resistance\u003cbr\u003e\n* Superior protection against oil starvation \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eKing XP \u0026amp; XPC race bearings have already led to new records on the race track. King’s ability to meet the continuously changing and challenging demands of the racing industry with our unique materials and geometric features are a testament to the quality and reliability of our bearings, and reinforces our commitment to developing the ultimate race bearings.\u003cbr\u003e\u003cbr\u003e\n\nThe King Racing line contains engine bearingsfor various segments. Equipped with advanced materials and construction techniques, King Racing bearings extend the limits of power, performance and durability.\u003cbr\u003e\u003cbr\u003eTo achieve the right clearance, they compensate for bearing thickness inconsistencies by grinding cranks “fat” or “thin”, adjusting the housing bore, or purchasing multiple sets to “fish” for shells. The process is time consuming, costly and tedious.\nKing listened to its engine building customers and responded with Bull’s Eye Tolerance™\u003cbr\u003e\u003cbr\u003e\n\nBull’s Eye Tolerance™ is a production technology developed by King. It combines highly accurate machining, overplating, and computerized wall thickness monitoring that adjusts the process on-the-spot.\u003cbr\u003e\n\nBull’s Eye Tolerance™ outperforms the industry’s wall thickness tolerance, ensuring the least thickness variation shell-to-shell. The outcome: A new standard in bearing thickness consistency.\u003cbr\u003e\u003cbr\u003e\n\nWith Bull’s Eye Tolerance™:\u003cbr\u003e\n\n• No more multiple set purchases or “fishing” for bearings to reach right clearance\u003cbr\u003e\n• No need to grind cranks “fat” or “thin”\u003cbr\u003e\n• No need to adjust housing diameter\u003cbr\u003e\n• Less taper across the bearing face\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.king-catalog.com\/Catalog\/Set\/MB5740XPG\" target=\"_blank\"\u003eCheck Fitment here\u003c\/a\u003e\u003c!--split--\u003ehttp:\/\/www.king-catalog.com\/Catalog\/Set\/MB5740XPG","published_at":"2021-09-20T01:46:44+08:00","created_at":"2021-09-20T01:46:45+08:00","vendor":"King Bearings","type":"Build Your Block","tags":["build-your-block","ej205-2000cc-dohc-16v-tc-h4","ej22g-2200cc-dohc-16v-tc-h4","ej255-2500cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","king-bearings","main-bearings","subaru","US1","ws131"],"price":23640,"price_min":23640,"price_max":23640,"available":true,"price_varies":false,"compare_at_price":30100,"compare_at_price_min":30100,"compare_at_price_max":30100,"compare_at_price_varies":false,"variants":[{"id":40606429872310,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MB5740XPG","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"King Subaru EJ20\/EJ22\/EJ25 .005 Oversized Tri-Metal Perf Main Bearing Set","public_title":null,"options":["Default Title"],"price":23640,"weight":4363,"compare_at_price":30100,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-005-oversized-tri-metal-perf-main-bearing-set-rzcrew.jpg?v=1710323267"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-005-oversized-tri-metal-perf-main-bearing-set-rzcrew.jpg?v=1710323267","options":["Title"],"media":[{"alt":"King Subaru EJ20\/EJ22\/EJ25 .005 Oversized Tri-Metal Perf Main Bearing Set - MB5740XPG","id":22325990981814,"position":1,"preview_image":{"aspect_ratio":1.5,"height":3456,"width":5184,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-005-oversized-tri-metal-perf-main-bearing-set-rzcrew.jpg?v=1710323267"},"aspect_ratio":1.5,"height":3456,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-005-oversized-tri-metal-perf-main-bearing-set-rzcrew.jpg?v=1710323267","width":5184}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: King Bearings\u003cbr\u003eReference Number: MB5740XPG\u003cbr\u003eNotes: Give your engine the winning edge with King XP-Series coated rod bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote nano-composite coating takes protection to the next level without adding any additional thickness! These high performance race bearing sets are available for fitment on a wide range of specific vehicle applications.\u003cbr\u003e\u003cbr\u003e\n\npMaxKote provides:\u003cbr\u003e\n* Superior seizure resistance\u003cbr\u003e\n* Superior cavitation resistance\u003cbr\u003e\n* Superior wear resistance\u003cbr\u003e\n* Superior protection against oil starvation \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eKing XP \u0026amp; XPC race bearings have already led to new records on the race track. King’s ability to meet the continuously changing and challenging demands of the racing industry with our unique materials and geometric features are a testament to the quality and reliability of our bearings, and reinforces our commitment to developing the ultimate race bearings.\u003cbr\u003e\u003cbr\u003e\n\nThe King Racing line contains engine bearingsfor various segments. Equipped with advanced materials and construction techniques, King Racing bearings extend the limits of power, performance and durability.\u003cbr\u003e\u003cbr\u003eTo achieve the right clearance, they compensate for bearing thickness inconsistencies by grinding cranks “fat” or “thin”, adjusting the housing bore, or purchasing multiple sets to “fish” for shells. The process is time consuming, costly and tedious.\nKing listened to its engine building customers and responded with Bull’s Eye Tolerance™\u003cbr\u003e\u003cbr\u003e\n\nBull’s Eye Tolerance™ is a production technology developed by King. It combines highly accurate machining, overplating, and computerized wall thickness monitoring that adjusts the process on-the-spot.\u003cbr\u003e\n\nBull’s Eye Tolerance™ outperforms the industry’s wall thickness tolerance, ensuring the least thickness variation shell-to-shell. The outcome: A new standard in bearing thickness consistency.\u003cbr\u003e\u003cbr\u003e\n\nWith Bull’s Eye Tolerance™:\u003cbr\u003e\n\n• No more multiple set purchases or “fishing” for bearings to reach right clearance\u003cbr\u003e\n• No need to grind cranks “fat” or “thin”\u003cbr\u003e\n• No need to adjust housing diameter\u003cbr\u003e\n• Less taper across the bearing face\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.king-catalog.com\/Catalog\/Set\/MB5740XPG\" target=\"_blank\"\u003eCheck Fitment here\u003c\/a\u003e\u003c!--split--\u003ehttp:\/\/www.king-catalog.com\/Catalog\/Set\/MB5740XPG"}

{"id":7038918787254,"title":"King Subaru EJ20\/EJ22\/EJ25 .002 Oversized Tri-Metal Perf Main Bearing Set","handle":"king-subaru-ej20-ej22-ej25-002-oversized-tri-metal-perf-main-bearing-set-mb5739xpg","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: King Bearings\u003cbr\u003eReference Number: MB5739XPG\u003cbr\u003eNotes: Give your engine the winning edge with King XP-Series coated rod bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote nano-composite coating takes protection to the next level without adding any additional thickness! These high performance race bearing sets are available for fitment on a wide range of specific vehicle applications.\u003cbr\u003e\u003cbr\u003e\n\npMaxKote provides:\u003cbr\u003e\n* Superior seizure resistance\u003cbr\u003e\n* Superior cavitation resistance\u003cbr\u003e\n* Superior wear resistance\u003cbr\u003e\n* Superior protection against oil starvation \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eKing XP \u0026amp; XPC race bearings have already led to new records on the race track. King’s ability to meet the continuously changing and challenging demands of the racing industry with our unique materials and geometric features are a testament to the quality and reliability of our bearings, and reinforces our commitment to developing the ultimate race bearings.\u003cbr\u003e\u003cbr\u003e\n\nThe King Racing line contains engine bearingsfor various segments. Equipped with advanced materials and construction techniques, King Racing bearings extend the limits of power, performance and durability.\u003cbr\u003e\u003cbr\u003eTo achieve the right clearance, they compensate for bearing thickness inconsistencies by grinding cranks “fat” or “thin”, adjusting the housing bore, or purchasing multiple sets to “fish” for shells. The process is time consuming, costly and tedious.\nKing listened to its engine building customers and responded with Bull’s Eye Tolerance™\u003cbr\u003e\u003cbr\u003e\n\nBull’s Eye Tolerance™ is a production technology developed by King. It combines highly accurate machining, overplating, and computerized wall thickness monitoring that adjusts the process on-the-spot.\u003cbr\u003e\n\nBull’s Eye Tolerance™ outperforms the industry’s wall thickness tolerance, ensuring the least thickness variation shell-to-shell. The outcome: A new standard in bearing thickness consistency.\u003cbr\u003e\u003cbr\u003e\n\nWith Bull’s Eye Tolerance™:\u003cbr\u003e\n\n• No more multiple set purchases or “fishing” for bearings to reach right clearance\u003cbr\u003e\n• No need to grind cranks “fat” or “thin”\u003cbr\u003e\n• No need to adjust housing diameter\u003cbr\u003e\n• Less taper across the bearing face\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.king-catalog.com\/Catalog\/Set\/MB5739XPG\" target=\"_blank\"\u003eCheck Fitment here\u003c\/a\u003e\u003c!--split--\u003ehttp:\/\/www.king-catalog.com\/Catalog\/Set\/MB5739XPG","published_at":"2021-09-20T01:46:42+08:00","created_at":"2021-09-20T01:46:43+08:00","vendor":"King Bearings","type":"Build Your Block","tags":["build-your-block","ej205-2000cc-dohc-16v-tc-h4","ej22g-2200cc-dohc-16v-tc-h4","ej255-2500cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","king-bearings","main-bearings","subaru","US1","ws130"],"price":23110,"price_min":23110,"price_max":23110,"available":true,"price_varies":false,"compare_at_price":29400,"compare_at_price_min":29400,"compare_at_price_max":29400,"compare_at_price_varies":false,"variants":[{"id":40606429839542,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MB5739XPG","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"King Subaru EJ20\/EJ22\/EJ25 .002 Oversized Tri-Metal Perf Main Bearing Set","public_title":null,"options":["Default Title"],"price":23110,"weight":4363,"compare_at_price":29400,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-002-oversized-tri-metal-perf-main-bearing-set-rzcrew.jpg?v=1710323267"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-002-oversized-tri-metal-perf-main-bearing-set-rzcrew.jpg?v=1710323267","options":["Title"],"media":[{"alt":"King Subaru EJ20\/EJ22\/EJ25 .002 Oversized Tri-Metal Perf Main Bearing Set - MB5739XPG","id":22325989671094,"position":1,"preview_image":{"aspect_ratio":1.5,"height":3456,"width":5184,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-002-oversized-tri-metal-perf-main-bearing-set-rzcrew.jpg?v=1710323267"},"aspect_ratio":1.5,"height":3456,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-ej20ej22ej25-002-oversized-tri-metal-perf-main-bearing-set-rzcrew.jpg?v=1710323267","width":5184}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: King Bearings\u003cbr\u003eReference Number: MB5739XPG\u003cbr\u003eNotes: Give your engine the winning edge with King XP-Series coated rod bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote nano-composite coating takes protection to the next level without adding any additional thickness! These high performance race bearing sets are available for fitment on a wide range of specific vehicle applications.\u003cbr\u003e\u003cbr\u003e\n\npMaxKote provides:\u003cbr\u003e\n* Superior seizure resistance\u003cbr\u003e\n* Superior cavitation resistance\u003cbr\u003e\n* Superior wear resistance\u003cbr\u003e\n* Superior protection against oil starvation \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eKing XP \u0026amp; XPC race bearings have already led to new records on the race track. King’s ability to meet the continuously changing and challenging demands of the racing industry with our unique materials and geometric features are a testament to the quality and reliability of our bearings, and reinforces our commitment to developing the ultimate race bearings.\u003cbr\u003e\u003cbr\u003e\n\nThe King Racing line contains engine bearingsfor various segments. Equipped with advanced materials and construction techniques, King Racing bearings extend the limits of power, performance and durability.\u003cbr\u003e\u003cbr\u003eTo achieve the right clearance, they compensate for bearing thickness inconsistencies by grinding cranks “fat” or “thin”, adjusting the housing bore, or purchasing multiple sets to “fish” for shells. The process is time consuming, costly and tedious.\nKing listened to its engine building customers and responded with Bull’s Eye Tolerance™\u003cbr\u003e\u003cbr\u003e\n\nBull’s Eye Tolerance™ is a production technology developed by King. It combines highly accurate machining, overplating, and computerized wall thickness monitoring that adjusts the process on-the-spot.\u003cbr\u003e\n\nBull’s Eye Tolerance™ outperforms the industry’s wall thickness tolerance, ensuring the least thickness variation shell-to-shell. The outcome: A new standard in bearing thickness consistency.\u003cbr\u003e\u003cbr\u003e\n\nWith Bull’s Eye Tolerance™:\u003cbr\u003e\n\n• No more multiple set purchases or “fishing” for bearings to reach right clearance\u003cbr\u003e\n• No need to grind cranks “fat” or “thin”\u003cbr\u003e\n• No need to adjust housing diameter\u003cbr\u003e\n• Less taper across the bearing face\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.king-catalog.com\/Catalog\/Set\/MB5739XPG\" target=\"_blank\"\u003eCheck Fitment here\u003c\/a\u003e\u003c!--split--\u003ehttp:\/\/www.king-catalog.com\/Catalog\/Set\/MB5739XPG"}

{"id":7038918754486,"title":"King Subaru WRX\/STi EJ20 EJ22 EJ25 Flange #3 Position (Size STDX) Performance Main Bearing Set","handle":"king-subaru-wrx-sti-ej20-ej22-ej25-flange-3-position-size-stdx-performance-main-bearing-set-mb5220xpstdx","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: King Bearings\u003cbr\u003eReference Number: MB5220XPSTDX\u003cbr\u003eNotes: pMaxBlack™ tri-metal structure\u003cbr\u003e\nIntermediate layer\u003cbr\u003e\u003cbr\u003e\n\nThe intermediate layer of a typical race bearing contains 2-3% tin, with hardness values of 90-95 HV. For a superior pMax Black™ intermediate layer, we increased the tin content to 4.5%, making it 22% harder (115 HV), with a load carrying capacity of 17,000 psi.\npMaxBlack™ Overlay\u003cbr\u003e\u003cbr\u003e\n\nThe overlay of a typical high performance bearing consists of a leaded alloy that contains 2-3% copper. It achieves a hardness level of 11 – 14 HV, and a maximum load capacity of 8,000-8,500 psi.\u003cbr\u003e\u003cbr\u003e\n\nKing’s pMaxBlack™ overlay is significantly stronger than conventional overlays due to its 5% copper content and an innovative nano-scaled hardening process.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eKing XP \u0026amp; XPC race bearings have already led to new records on the race track. King’s ability to meet the continuously changing and challenging demands of the racing industry with our unique materials and geometric features are a testament to the quality and reliability of our bearings, and reinforces our commitment to developing the ultimate race bearings.\u003cbr\u003e\u003cbr\u003e\n\nThe King Racing line contains engine bearingsfor various segments. Equipped with advanced materials and construction techniques, King Racing bearings extend the limits of power, performance and durability.\u003cbr\u003e\u003cbr\u003eTo achieve the right clearance, they compensate for bearing thickness inconsistencies by grinding cranks “fat” or “thin”, adjusting the housing bore, or purchasing multiple sets to “fish” for shells. The process is time consuming, costly and tedious.\nKing listened to its engine building customers and responded with Bull’s Eye Tolerance™\u003cbr\u003e\u003cbr\u003e\n\nBull’s Eye Tolerance™ is a production technology developed by King. It combines highly accurate machining, overplating, and computerized wall thickness monitoring that adjusts the process on-the-spot.\u003cbr\u003e\n\nBull’s Eye Tolerance™ outperforms the industry’s wall thickness tolerance, ensuring the least thickness variation shell-to-shell. The outcome: A new standard in bearing thickness consistency.\u003cbr\u003e\u003cbr\u003e\n\nWith Bull’s Eye Tolerance™:\u003cbr\u003e\n\n• No more multiple set purchases or “fishing” for bearings to reach right clearance\u003cbr\u003e\n• No need to grind cranks “fat” or “thin”\u003cbr\u003e\n• No need to adjust housing diameter\u003cbr\u003e\n• Less taper across the bearing face\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.king-catalog.com\/Catalog\/Set\/MB5220XP\" target=\"_blank\"\u003eCheck Fitment here\u003c\/a\u003e\u003c!--split--\u003ehttp:\/\/www.king-catalog.com\/Catalog\/Set\/MB5220XP","published_at":"2021-09-20T01:46:40+08:00","created_at":"2021-09-20T01:46:41+08:00","vendor":"King Bearings","type":"Build Your Block","tags":["build-your-block","ej205-2000cc-dohc-16v-tc-h4","ej22g-2200cc-dohc-16v-tc-h4","ej255-2500cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","king-bearings","main-bearings","subaru","US1","ws130"],"price":15110,"price_min":15110,"price_max":15110,"available":true,"price_varies":false,"compare_at_price":19200,"compare_at_price_min":19200,"compare_at_price_max":19200,"compare_at_price_varies":false,"variants":[{"id":40606429774006,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MB5220XPSTDX","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"King Subaru WRX\/STi EJ20 EJ22 EJ25 Flange #3 Position (Size STDX) Performance Main Bearing Set","public_title":null,"options":["Default Title"],"price":15110,"weight":4454,"compare_at_price":19200,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-wrxsti-ej20-ej22-ej25-flange-3-position-size-stdx-performance-main-bearing-set-rzcrew.jpg?v=1710323267"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-wrxsti-ej20-ej22-ej25-flange-3-position-size-stdx-performance-main-bearing-set-rzcrew.jpg?v=1710323267","options":["Title"],"media":[{"alt":"King Subaru WRX\/STi EJ20 EJ22 EJ25 Flange #3 Position (Size STDX) Performance Main Bearing Set - MB5220XPSTDX","id":22325989572790,"position":1,"preview_image":{"aspect_ratio":1.5,"height":3456,"width":5184,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-wrxsti-ej20-ej22-ej25-flange-3-position-size-stdx-performance-main-bearing-set-rzcrew.jpg?v=1710323267"},"aspect_ratio":1.5,"height":3456,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-wrxsti-ej20-ej22-ej25-flange-3-position-size-stdx-performance-main-bearing-set-rzcrew.jpg?v=1710323267","width":5184}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: King Bearings\u003cbr\u003eReference Number: MB5220XPSTDX\u003cbr\u003eNotes: pMaxBlack™ tri-metal structure\u003cbr\u003e\nIntermediate layer\u003cbr\u003e\u003cbr\u003e\n\nThe intermediate layer of a typical race bearing contains 2-3% tin, with hardness values of 90-95 HV. For a superior pMax Black™ intermediate layer, we increased the tin content to 4.5%, making it 22% harder (115 HV), with a load carrying capacity of 17,000 psi.\npMaxBlack™ Overlay\u003cbr\u003e\u003cbr\u003e\n\nThe overlay of a typical high performance bearing consists of a leaded alloy that contains 2-3% copper. It achieves a hardness level of 11 – 14 HV, and a maximum load capacity of 8,000-8,500 psi.\u003cbr\u003e\u003cbr\u003e\n\nKing’s pMaxBlack™ overlay is significantly stronger than conventional overlays due to its 5% copper content and an innovative nano-scaled hardening process.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eKing XP \u0026amp; XPC race bearings have already led to new records on the race track. King’s ability to meet the continuously changing and challenging demands of the racing industry with our unique materials and geometric features are a testament to the quality and reliability of our bearings, and reinforces our commitment to developing the ultimate race bearings.\u003cbr\u003e\u003cbr\u003e\n\nThe King Racing line contains engine bearingsfor various segments. Equipped with advanced materials and construction techniques, King Racing bearings extend the limits of power, performance and durability.\u003cbr\u003e\u003cbr\u003eTo achieve the right clearance, they compensate for bearing thickness inconsistencies by grinding cranks “fat” or “thin”, adjusting the housing bore, or purchasing multiple sets to “fish” for shells. The process is time consuming, costly and tedious.\nKing listened to its engine building customers and responded with Bull’s Eye Tolerance™\u003cbr\u003e\u003cbr\u003e\n\nBull’s Eye Tolerance™ is a production technology developed by King. It combines highly accurate machining, overplating, and computerized wall thickness monitoring that adjusts the process on-the-spot.\u003cbr\u003e\n\nBull’s Eye Tolerance™ outperforms the industry’s wall thickness tolerance, ensuring the least thickness variation shell-to-shell. The outcome: A new standard in bearing thickness consistency.\u003cbr\u003e\u003cbr\u003e\n\nWith Bull’s Eye Tolerance™:\u003cbr\u003e\n\n• No more multiple set purchases or “fishing” for bearings to reach right clearance\u003cbr\u003e\n• No need to grind cranks “fat” or “thin”\u003cbr\u003e\n• No need to adjust housing diameter\u003cbr\u003e\n• Less taper across the bearing face\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.king-catalog.com\/Catalog\/Set\/MB5220XP\" target=\"_blank\"\u003eCheck Fitment here\u003c\/a\u003e\u003c!--split--\u003ehttp:\/\/www.king-catalog.com\/Catalog\/Set\/MB5220XP"}

{"id":7038918721718,"title":"King Subaru WRX\/STi EJ20 EJ22 EJ25 Flange #3 Position (Size 0.5) Performance Main Bearing Set","handle":"king-subaru-wrx-sti-ej20-ej22-ej25-flange-3-position-size-0-5-performance-main-bearing-set-mb5220xp0-5","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: King Bearings\u003cbr\u003eReference Number: MB5220XP0.5\u003cbr\u003eNotes: pMaxBlack™ tri-metal structure\u003cbr\u003e\nIntermediate layer\u003cbr\u003e\u003cbr\u003e\n\nThe intermediate layer of a typical race bearing contains 2-3% tin, with hardness values of 90-95 HV. For a superior pMax Black™ intermediate layer, we increased the tin content to 4.5%, making it 22% harder (115 HV), with a load carrying capacity of 17,000 psi.\npMaxBlack™ Overlay\u003cbr\u003e\u003cbr\u003e\n\nThe overlay of a typical high performance bearing consists of a leaded alloy that contains 2-3% copper. It achieves a hardness level of 11 – 14 HV, and a maximum load capacity of 8,000-8,500 psi.\u003cbr\u003e\u003cbr\u003e\n\nKing’s pMaxBlack™ overlay is significantly stronger than conventional overlays due to its 5% copper content and an innovative nano-scaled hardening process.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eKing XP \u0026amp; XPC race bearings have already led to new records on the race track. King’s ability to meet the continuously changing and challenging demands of the racing industry with our unique materials and geometric features are a testament to the quality and reliability of our bearings, and reinforces our commitment to developing the ultimate race bearings.\u003cbr\u003e\u003cbr\u003e\n\nThe King Racing line contains engine bearingsfor various segments. Equipped with advanced materials and construction techniques, King Racing bearings extend the limits of power, performance and durability.\u003cbr\u003e\u003cbr\u003eTo achieve the right clearance, they compensate for bearing thickness inconsistencies by grinding cranks “fat” or “thin”, adjusting the housing bore, or purchasing multiple sets to “fish” for shells. The process is time consuming, costly and tedious.\nKing listened to its engine building customers and responded with Bull’s Eye Tolerance™\u003cbr\u003e\u003cbr\u003e\n\nBull’s Eye Tolerance™ is a production technology developed by King. It combines highly accurate machining, overplating, and computerized wall thickness monitoring that adjusts the process on-the-spot.\u003cbr\u003e\n\nBull’s Eye Tolerance™ outperforms the industry’s wall thickness tolerance, ensuring the least thickness variation shell-to-shell. The outcome: A new standard in bearing thickness consistency.\u003cbr\u003e\u003cbr\u003e\n\nWith Bull’s Eye Tolerance™:\u003cbr\u003e\n\n• No more multiple set purchases or “fishing” for bearings to reach right clearance\u003cbr\u003e\n• No need to grind cranks “fat” or “thin”\u003cbr\u003e\n• No need to adjust housing diameter\u003cbr\u003e\n• Less taper across the bearing face\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.king-catalog.com\/Catalog\/Set\/MB5220XP\" target=\"_blank\"\u003eCheck Fitment here\u003c\/a\u003e\u003c!--split--\u003ehttp:\/\/www.king-catalog.com\/Catalog\/Set\/MB5220XP","published_at":"2021-09-20T01:46:38+08:00","created_at":"2021-09-20T01:46:39+08:00","vendor":"King Bearings","type":"Build Your Block","tags":["build-your-block","ej205-2000cc-dohc-16v-tc-h4","ej22g-2200cc-dohc-16v-tc-h4","ej255-2500cc-dohc-16v-tc-h4","ej257-2500cc-dohc-16v-tc-h4","king-bearings","main-bearings","subaru","US1","ws130"],"price":14390,"price_min":14390,"price_max":14390,"available":true,"price_varies":false,"compare_at_price":18300,"compare_at_price_min":18300,"compare_at_price_max":18300,"compare_at_price_varies":false,"variants":[{"id":40606429741238,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MB5220XP0.5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"King Subaru WRX\/STi EJ20 EJ22 EJ25 Flange #3 Position (Size 0.5) Performance Main Bearing Set","public_title":null,"options":["Default Title"],"price":14390,"weight":4454,"compare_at_price":18300,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-wrxsti-ej20-ej22-ej25-flange-3-position-size-0-5-performance-main-bearing-set-rzcrew.jpg?v=1710323268"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-wrxsti-ej20-ej22-ej25-flange-3-position-size-0-5-performance-main-bearing-set-rzcrew.jpg?v=1710323268","options":["Title"],"media":[{"alt":"King Subaru WRX\/STi EJ20 EJ22 EJ25 Flange #3 Position (Size 0.5) Performance Main Bearing Set - MB5220XP0.5","id":22325989474486,"position":1,"preview_image":{"aspect_ratio":1.5,"height":3456,"width":5184,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-wrxsti-ej20-ej22-ej25-flange-3-position-size-0-5-performance-main-bearing-set-rzcrew.jpg?v=1710323268"},"aspect_ratio":1.5,"height":3456,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/king-subaru-wrxsti-ej20-ej22-ej25-flange-3-position-size-0-5-performance-main-bearing-set-rzcrew.jpg?v=1710323268","width":5184}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: King Bearings\u003cbr\u003eReference Number: MB5220XP0.5\u003cbr\u003eNotes: pMaxBlack™ tri-metal structure\u003cbr\u003e\nIntermediate layer\u003cbr\u003e\u003cbr\u003e\n\nThe intermediate layer of a typical race bearing contains 2-3% tin, with hardness values of 90-95 HV. For a superior pMax Black™ intermediate layer, we increased the tin content to 4.5%, making it 22% harder (115 HV), with a load carrying capacity of 17,000 psi.\npMaxBlack™ Overlay\u003cbr\u003e\u003cbr\u003e\n\nThe overlay of a typical high performance bearing consists of a leaded alloy that contains 2-3% copper. It achieves a hardness level of 11 – 14 HV, and a maximum load capacity of 8,000-8,500 psi.\u003cbr\u003e\u003cbr\u003e\n\nKing’s pMaxBlack™ overlay is significantly stronger than conventional overlays due to its 5% copper content and an innovative nano-scaled hardening process.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eKing XP \u0026amp; XPC race bearings have already led to new records on the race track. King’s ability to meet the continuously changing and challenging demands of the racing industry with our unique materials and geometric features are a testament to the quality and reliability of our bearings, and reinforces our commitment to developing the ultimate race bearings.\u003cbr\u003e\u003cbr\u003e\n\nThe King Racing line contains engine bearingsfor various segments. Equipped with advanced materials and construction techniques, King Racing bearings extend the limits of power, performance and durability.\u003cbr\u003e\u003cbr\u003eTo achieve the right clearance, they compensate for bearing thickness inconsistencies by grinding cranks “fat” or “thin”, adjusting the housing bore, or purchasing multiple sets to “fish” for shells. The process is time consuming, costly and tedious.\nKing listened to its engine building customers and responded with Bull’s Eye Tolerance™\u003cbr\u003e\u003cbr\u003e\n\nBull’s Eye Tolerance™ is a production technology developed by King. It combines highly accurate machining, overplating, and computerized wall thickness monitoring that adjusts the process on-the-spot.\u003cbr\u003e\n\nBull’s Eye Tolerance™ outperforms the industry’s wall thickness tolerance, ensuring the least thickness variation shell-to-shell. The outcome: A new standard in bearing thickness consistency.\u003cbr\u003e\u003cbr\u003e\n\nWith Bull’s Eye Tolerance™:\u003cbr\u003e\n\n• No more multiple set purchases or “fishing” for bearings to reach right clearance\u003cbr\u003e\n• No need to grind cranks “fat” or “thin”\u003cbr\u003e\n• No need to adjust housing diameter\u003cbr\u003e\n• Less taper across the bearing face\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.king-catalog.com\/Catalog\/Set\/MB5220XP\" target=\"_blank\"\u003eCheck Fitment here\u003c\/a\u003e\u003c!--split--\u003ehttp:\/\/www.king-catalog.com\/Catalog\/Set\/MB5220XP"}