Civic | FG2 | 2007-2009 | NA | K20Z3 | I4

{"id":1424933027937,"title":"Grams Performance - DBW 72mm billet Throttle Body - Honda - K20 K24 F20C F22C (DBW)","handle":"dbw-72mm-billet-throttle-body-k20-k24-f20c-f22c-dbw-g09-05-0001","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Grams Performance\u003cbr\u003eReference Number: G09-05-0001\u003cbr\u003eThrottle Body Diameter: 72mm\u003cbr\u003e\u003cbr\u003eThe new Grams 72mm Drive-By-Wire Electronic Throttle Body is the perfect upgrade from the factory 64mm Honda\/Acura throttle body; delivering a 50% increase in airflow. Each throttle body includes all new components including a CNC machined billet 6061-T6 aluminum housing with a precision-honed oversized bore, a high-torque servo motor, and a proprietary Non-Contact Hall Effect TPS sensor. To ensure the best performance, throttle response, and driveability, each TPS sensor is calibrated to meet the specific requirements of the vehicles engine management system. The Grams electronic throttle body is an ideal solution for both modified and stock engines with increased airflow demands.\u003cbr\u003e\u003cbr\u003eManufacturer Note:\u003cbr\u003e\n50% Increase in Airflow Over Stock 64mm Throttle Body.\n\u003cbr\u003ePrecision Honed Oversized 72mm Bore with Tapered 80mm Entry.\n\u003cbr\u003eCNC Machined Billet 6061-T6 Aluminum Housing.\n\u003cbr\u003eAluminum Throttle Plate.\n\u003cbr\u003eFactory Programmable Non-Contact Hall Effect TPS.\n\u003cbr\u003eOptimized TPS Response Curve.\n\u003cbr\u003eHigh-Precision Servo Motor.\n\u003cbr\u003eThermal Gasket, Plug \u0026amp; Play Adapter Harness, and Hardware Included.\n\u003c!--split--\u003e0\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. 0\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAccord | CL9 | 2002-2008 | NA | K24A3 | I4\u003cbr\u003eAccord Wagon | CM2 | 2002-2005 | NA | K24A3 | I4\u003cbr\u003eCivic | FG2 | 2007-2009 | NA | K20Z3 | I4\u003cbr\u003eCivic | FN2 | 2009-2012 | NA | K20A | I4\u003cbr\u003eCivic Type R Euro | FN2R | 2009-2012 | NA | K20A | I4\u003cbr\u003eCivic Type R | FD2R | 2007-2010 | NA | K20A | I4\u003cbr\u003eS2000 | AP1 | 1999-2003 | NA | F20C | I4\u003cbr\u003eS2000 | AP2 | 2003-2009 | NA | F22C | I4\u003c!--split--\u003e","published_at":"2025-08-22T15:31:27+08:00","created_at":"2018-09-02T20:55:17+08:00","vendor":"Grams Performance","type":"Throttle Bodies","tags":["1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","accord-cl9-2002-2008-na-k24a3-i4","accord-wagon-cm2-2002-2005-na-k24a3-i4","civic-fg2-2007-2009-na-k20z3-i4","civic-fn2-2009-2012-na-k20a-i4","civic-type-r-euro-fn2r-2009-2012-na-k20a-i4","civic-type-r-fd2r-2007-2010-na-k20a-i4","grams-performance","honda","intake","s2000-ap1-1999-2003-na-f20c-i4","s2000-ap2-2003-2009-na-f22c-i4","throttle-bodies","US1","ws114"],"price":2550,"price_min":2550,"price_max":2550,"available":false,"price_varies":false,"compare_at_price":2800,"compare_at_price_min":2800,"compare_at_price_max":2800,"compare_at_price_varies":false,"variants":[{"id":12418396061793,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"G09-05-0001","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Grams Performance - DBW 72mm billet Throttle Body - Honda - K20 K24 F20C F22C (DBW)","public_title":null,"options":["Default Title"],"price":2550,"weight":10000,"compare_at_price":2800,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/G09-05-0001.png?v=1710167456"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/G09-05-0001.png?v=1710167456","options":["Title"],"media":[{"alt":"DBW 72mm billet Throttle Body - K20 K24 F20C F22C (DBW) - G09-05-0001","id":25426645254326,"position":1,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/G09-05-0001.png?v=1710167456"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/G09-05-0001.png?v=1710167456","width":650}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Grams Performance\u003cbr\u003eReference Number: G09-05-0001\u003cbr\u003eThrottle Body Diameter: 72mm\u003cbr\u003e\u003cbr\u003eThe new Grams 72mm Drive-By-Wire Electronic Throttle Body is the perfect upgrade from the factory 64mm Honda\/Acura throttle body; delivering a 50% increase in airflow. Each throttle body includes all new components including a CNC machined billet 6061-T6 aluminum housing with a precision-honed oversized bore, a high-torque servo motor, and a proprietary Non-Contact Hall Effect TPS sensor. To ensure the best performance, throttle response, and driveability, each TPS sensor is calibrated to meet the specific requirements of the vehicles engine management system. The Grams electronic throttle body is an ideal solution for both modified and stock engines with increased airflow demands.\u003cbr\u003e\u003cbr\u003eManufacturer Note:\u003cbr\u003e\n50% Increase in Airflow Over Stock 64mm Throttle Body.\n\u003cbr\u003ePrecision Honed Oversized 72mm Bore with Tapered 80mm Entry.\n\u003cbr\u003eCNC Machined Billet 6061-T6 Aluminum Housing.\n\u003cbr\u003eAluminum Throttle Plate.\n\u003cbr\u003eFactory Programmable Non-Contact Hall Effect TPS.\n\u003cbr\u003eOptimized TPS Response Curve.\n\u003cbr\u003eHigh-Precision Servo Motor.\n\u003cbr\u003eThermal Gasket, Plug \u0026amp; Play Adapter Harness, and Hardware Included.\n\u003c!--split--\u003e0\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. 0\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAccord | CL9 | 2002-2008 | NA | K24A3 | I4\u003cbr\u003eAccord Wagon | CM2 | 2002-2005 | NA | K24A3 | I4\u003cbr\u003eCivic | FG2 | 2007-2009 | NA | K20Z3 | I4\u003cbr\u003eCivic | FN2 | 2009-2012 | NA | K20A | I4\u003cbr\u003eCivic Type R Euro | FN2R | 2009-2012 | NA | K20A | I4\u003cbr\u003eCivic Type R | FD2R | 2007-2010 | NA | K20A | I4\u003cbr\u003eS2000 | AP1 | 1999-2003 | NA | F20C | I4\u003cbr\u003eS2000 | AP2 | 2003-2009 | NA | F22C | I4\u003c!--split--\u003e"}

{"id":562003148827,"title":"Mishimoto - Honda Civic Si Silicone Induction Hose - Black - FD2 FG2 - MMHOSE-CIV-06SIIHBK","handle":"mishimoto-honda-civic-si-silicone-induction-hose-black-fd2-fg2-mmhose-civ-06siihbk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-CIV-06SIIHBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2025-04-14T11:29:46+08:00","created_at":"2018-01-24T23:27:08+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["2007","2008","2009","2010","civic-fd2-2007-2010-na-k20z2-i4","civic-fg2-2007-2009-na-k20z3-i4","honda","intake","intake-hoses","mishimoto","US1","ws111"],"price":22460,"price_min":22460,"price_max":22460,"available":true,"price_varies":false,"compare_at_price":22500,"compare_at_price_min":22500,"compare_at_price_max":22500,"compare_at_price_varies":false,"variants":[{"id":5990402883611,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-CIV-06SIIHBK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Honda Civic Si Silicone Induction Hose - Black - FD2 FG2 - MMHOSE-CIV-06SIIHBK","public_title":null,"options":["Default Title"],"price":22460,"weight":5814,"compare_at_price":22500,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHBK.jpg?v=1710154197"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHBK.jpg?v=1710154197","options":["Title"],"media":[{"alt":"Mishimoto - Honda Civic Si Silicone Induction Hose - Black - FD2 FG2 - MMHOSE-CIV-06SIIHBK - Rzcrewgarage","id":1351406780513,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHBK.jpg?v=1710154197"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHBK.jpg?v=1710154197","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-CIV-06SIIHBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":562004099099,"title":"Mishimoto - Honda Civic Si Silicone Induction Hose - Blue - FD2 FG2 - MMHOSE-CIV-06SIIHBL","handle":"mishimoto-honda-civic-si-silicone-induction-hose-blue-fd2-fg2-mmhose-civ-06siihbl","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-CIV-06SIIHBL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2025-04-14T11:29:47+08:00","created_at":"2018-01-24T23:27:09+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["2007","2008","2009","2010","civic-fd2-2007-2010-na-k20z2-i4","civic-fg2-2007-2009-na-k20z3-i4","honda","intake","intake-hoses","mishimoto","US1","ws111"],"price":22460,"price_min":22460,"price_max":22460,"available":false,"price_varies":false,"compare_at_price":22500,"compare_at_price_min":22500,"compare_at_price_max":22500,"compare_at_price_varies":false,"variants":[{"id":5990403801115,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-CIV-06SIIHBL","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Mishimoto - Honda Civic Si Silicone Induction Hose - Blue - FD2 FG2 - MMHOSE-CIV-06SIIHBL","public_title":null,"options":["Default Title"],"price":22460,"weight":10000,"compare_at_price":22500,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHBL.jpg?v=1710154199"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHBL.jpg?v=1710154199","options":["Title"],"media":[{"alt":"Mishimoto - Honda Civic Si Silicone Induction Hose - Blue - FD2 FG2 - MMHOSE-CIV-06SIIHBL - Rzcrewgarage","id":1351406813281,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHBL.jpg?v=1710154199"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHBL.jpg?v=1710154199","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-CIV-06SIIHBL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":562004131867,"title":"Mishimoto - Honda Civic Si Silicone Induction Hose - Red - FD2 FG2 - MMHOSE-CIV-06SIIHRD","handle":"mishimoto-honda-civic-si-silicone-induction-hose-red-fd2-fg2-mmhose-civ-06siihrd","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-CIV-06SIIHRD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2025-04-14T11:29:51+08:00","created_at":"2018-01-24T23:27:09+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["2007","2008","2009","2010","civic-fd2-2007-2010-na-k20z2-i4","civic-fg2-2007-2009-na-k20z3-i4","honda","intake","intake-hoses","mishimoto","US1","ws111"],"price":22460,"price_min":22460,"price_max":22460,"available":false,"price_varies":false,"compare_at_price":22500,"compare_at_price_min":22500,"compare_at_price_max":22500,"compare_at_price_varies":false,"variants":[{"id":5990403866651,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-CIV-06SIIHRD","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Mishimoto - Honda Civic Si Silicone Induction Hose - Red - FD2 FG2 - MMHOSE-CIV-06SIIHRD","public_title":null,"options":["Default Title"],"price":22460,"weight":10000,"compare_at_price":22500,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHRD.jpg?v=1710154199"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHRD.jpg?v=1710154199","options":["Title"],"media":[{"alt":"Mishimoto - Honda Civic Si Silicone Induction Hose - Red - FD2 FG2 - MMHOSE-CIV-06SIIHRD - Rzcrewgarage","id":1351406878817,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHRD.jpg?v=1710154199"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHRD.jpg?v=1710154199","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-CIV-06SIIHRD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":8275770998966,"title":"Skunk 2 - 72mm Electronic Throttle Body - Honda Civic FG2","handle":"skunk-2-72mm-electronic-throttle-body-honda-civic-fg2-309-05-0001","description":"\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Skunk 2\u003cbr\u003eReference Number: 309-05-0001\u003cbr\u003eThrottle Body Diameter: 72mm\u003cbr\u003e\u003cbr\u003eThe Skunk2 Racing 72mm Electronic Throttle Body (ETB) for the 06-11 Honda Civic Si is an easy solution for increasing the airflow your Honda K Series engine needs to make more power. The Skunk2 72mm ETB flows 50% more air than the restrictive 64mm OEM throttle body. The 72mm ETB improves the throttle response and efficiency of both naturally aspirated and boosted engines.\u003cbr\u003e\u003cbr\u003eSkunk2 ETBs are CNC machined from billet 6061-T6 aluminum. Our ETB's feature a precision-honed oversized bore, high-torque servo motor, and an advanced Hall Effect TPS sensor. To ensure the best performance, throttle response, and drivability the TPS sensor is programmed to meet the specific requirements for each vehicle application. Skunk2 ETBs come with all necessary hardware and a Skunk2 thermal gasket for easy Bolt-On Plug-N-Play installation.\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e50% Increase in Airflow Over Stock 64mm Throttle Body\u003cbr\u003eImproved Throttle Response\u003cbr\u003eIncreased Power Output\u003cbr\u003eCNC Machined Billet 6061-T6 Aluminum Body\u003cbr\u003ePrecision Honed Oversized 72mm Bore\u003cbr\u003eHigh-Torque Precision Servo Motor\u003cbr\u003eAdvanced Hall Effect TPS\u003cbr\u003eThermal Gasket Included\u003cbr\u003eSimple Bolt -On Installation\u003cbr\u003eAll Necessary Hardware Included\u003cbr\u003eNote: Skunk2 ETBs are not modified OEM units and do NOT require swapping electric motors.\u003cbr\u003e\u003c\/p\u003e\n\u003c!--split--\u003e\n\u003cp\u003e0\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. 0\u003c\/p\u003e\n\u003c!--split--\u003e\n\u003cp\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic | EF9 | 1989-1991 | NA | B16A | I4\u003cbr\u003eCivic | EE9 | 1989-1991 | NA | B16A | I4\u003cbr\u003eCR-X | EF8 | 1989-1992 | NA | B16A | I4\u003cbr\u003eCR-X | EE8 | 1989-1992 | NA | B16A | I4\u003cbr\u003eCivic | EG6 | 1992-1995 | NA | B16A | I4\u003cbr\u003eCivic Ferio | EG9 | 1992-1995 | NA | B16A | I4\u003cbr\u003eCivic | EK4 | 1995-2000 | NA | B16A | I4\u003cbr\u003eCivic Type R | EK9 | 1997-2000 | NA | B16B | I4\u003cbr\u003eCivic Ferio | EK4 | 1995-2000 | NA | B16A | I4\u003cbr\u003eCR-X DELSOL | EG2 | 1992-1997 | NA | B16A | I4\u003cbr\u003eIntegra type R | DB8 | 1996-2001 | NA | B18C | I4\u003cbr\u003eIntegra type R | DC2 Zenki | 1996-1998 | NA | B18C | I4\u003cbr\u003eIntegra type R | DC2 Kouki | 1998-2001 | NA | B18C | I4\u003cbr\u003eCivic | EF3 | 1988-1991 | NA | ZC DOHC | I4\u003cbr\u003eCivic | EF5 | 1988-1991 | NA | ZC DOHC | I4\u003cbr\u003eCivic | ED7 | 1988-1991 | NA | D16A9 | I4\u003cbr\u003eCR-X | EF7 | 1988-1992 | NA | ZC DOHC | I4\u003cbr\u003eCR-X | ED9 | 1988-1992 | NA | D16A9 | I4\u003cbr\u003eCivic | EG4 | 1992-1995 | NA | D15B | I4\u003cbr\u003eCivic | EG5 | 1992-1995 | NA | D16Z6 | I4\u003cbr\u003eCivic Ferio | EG8 | 1992-1995 | NA | D15B | I4\u003cbr\u003eCivic | EK3 | 1995-2000 | NA | D15B | I4\u003cbr\u003eCivic Ferio | EK3 | 1995-2000 | NA | D15B | I4\u003cbr\u003eCivic | EU3 | 2000-2002 | NA | D17A | I4\u003cbr\u003eCivic | EU4 | 2000-2002 | NA | D17A | I4\u003cbr\u003eCivic Coupe | EJ1 | 1991-1995 | NA | D16A | I4\u003cbr\u003eCivic Coupe | EJ7 | 1996-2000 | NA | D16A | I4\u003cbr\u003eCivic Ferio | ES3 | 2000-2003 | NA | D17A | I4\u003cbr\u003eCivic Ferio | ET2 | 2000-2003 | NA | D17A | I4\u003cbr\u003eCR-X DELSOL | EJ4 | 1995-1997 | NA | D16A | I4\u003cbr\u003eCR-X DELSOL | EG1 | 1992-1997 | NA | D15B | I4\u003cbr\u003eAccord | CD6 | 1994-1997 | NA | H22A | I4\u003cbr\u003eAccord | CL3 | 1997-2001 | NA | H22A | I4\u003cbr\u003eAccord Torneo Euro R | CL1 | 2000-2002 | NA | H22A | I4\u003cbr\u003eAccord Euro R | CD8R | 1994-1997 | NA | H22A | I4\u003cbr\u003eAccord Wagon | CF2 | 1997-2001 | NA | H22A | I4\u003cbr\u003eAccord Wagon | CH9 | 1999-2002 | NA | H22A | I4\u003cbr\u003eAccord Wagon | CL2 | 2000-2002 | NA | H22A | I4\u003cbr\u003ePrelude | BB1 | 1991-1996 | NA | H22A | I4\u003cbr\u003ePrelude | BB4 | 1991-1996 | NA | H22A | I4\u003cbr\u003ePrelude | BB6 | 1996-2001 | NA | H22A | I4\u003cbr\u003ePrelude | BB8 | 1996-2001 | NA | H22A | I4\u003cbr\u003eAccord | CD4 | 1994-1997 | NA | F20B | I4\u003cbr\u003eAccord | CD5 | 1994-1997 | NA | F22B | I4\u003cbr\u003eAccord | CF5 | 1997-2001 | NA | F20B | I4\u003cbr\u003eAccord Torneo | CF3 | 1997-2001 | NA | F18B | I4\u003cbr\u003eAccord Torneo | CF4 | 1997-2001 | NA | F20B | I4\u003cbr\u003eAccord Torneo | CF5 | 1997-2001 | NA | F20B | I4\u003cbr\u003eAccord Torneo | CL3 | 1997-2001 | NA | F20B | I4\u003cbr\u003eAccord Coupe | CB6 | 1990-1994 | NA | F20A | I4\u003cbr\u003eAccord Coupe | CB7 | 1990-1994 | NA | F22A | I4\u003cbr\u003eAccord Euro R | CD7 | 1994-1997 | NA | F22B | I4\u003cbr\u003eAccord Wagon | CB9 | 1991-1994 | NA | F22A | I4\u003cbr\u003eAccord Wagon | CE1 | 1994-1997 | NA | F22B | I4\u003cbr\u003eAccord Wagon | CF6 | 1997-2001 | NA | F23A | I4\u003cbr\u003eAccord Wagon | CF7 | 1997-2001 | NA | F23A | I4\u003cbr\u003ePrelude | BB5 | 1996-2001 | NA | F22B | I4\u003cbr\u003ePrelude | BB7 | 1996-2001 | NA | F22B | I4\u003c\/p\u003e\n\u003c!--split--\u003e","published_at":"2025-08-07T15:04:28+08:00","created_at":"2025-08-07T15:04:28+08:00","vendor":"Skunk 2","type":"Throttle Bodies","tags":["2007","2008","2009","civic-fg2-2007-2009-na-k20z3-i4","honda","intake","skunk-2","throttle-bodies","US1","ws15"],"price":58580,"price_min":58580,"price_max":58580,"available":true,"price_varies":false,"compare_at_price":53900,"compare_at_price_min":53900,"compare_at_price_max":53900,"compare_at_price_varies":false,"variants":[{"id":44180421345462,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"309-05-0001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skunk 2 - 72mm Electronic Throttle Body - Honda Civic FG2","public_title":null,"options":["Default Title"],"price":58580,"weight":6088,"compare_at_price":53900,"inventory_quantity":19,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/309-05-0001_02_500x500_3bfae587-d3f1-4dde-96dc-73a5a49e54d8.jpg?v=1754549806"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/309-05-0001_02_500x500_3bfae587-d3f1-4dde-96dc-73a5a49e54d8.jpg?v=1754549806","options":["Title"],"media":[{"alt":null,"id":30158840299702,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/309-05-0001_02_500x500_3bfae587-d3f1-4dde-96dc-73a5a49e54d8.jpg?v=1754549806"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/309-05-0001_02_500x500_3bfae587-d3f1-4dde-96dc-73a5a49e54d8.jpg?v=1754549806","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Skunk 2\u003cbr\u003eReference Number: 309-05-0001\u003cbr\u003eThrottle Body Diameter: 72mm\u003cbr\u003e\u003cbr\u003eThe Skunk2 Racing 72mm Electronic Throttle Body (ETB) for the 06-11 Honda Civic Si is an easy solution for increasing the airflow your Honda K Series engine needs to make more power. The Skunk2 72mm ETB flows 50% more air than the restrictive 64mm OEM throttle body. The 72mm ETB improves the throttle response and efficiency of both naturally aspirated and boosted engines.\u003cbr\u003e\u003cbr\u003eSkunk2 ETBs are CNC machined from billet 6061-T6 aluminum. Our ETB's feature a precision-honed oversized bore, high-torque servo motor, and an advanced Hall Effect TPS sensor. To ensure the best performance, throttle response, and drivability the TPS sensor is programmed to meet the specific requirements for each vehicle application. Skunk2 ETBs come with all necessary hardware and a Skunk2 thermal gasket for easy Bolt-On Plug-N-Play installation.\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e50% Increase in Airflow Over Stock 64mm Throttle Body\u003cbr\u003eImproved Throttle Response\u003cbr\u003eIncreased Power Output\u003cbr\u003eCNC Machined Billet 6061-T6 Aluminum Body\u003cbr\u003ePrecision Honed Oversized 72mm Bore\u003cbr\u003eHigh-Torque Precision Servo Motor\u003cbr\u003eAdvanced Hall Effect TPS\u003cbr\u003eThermal Gasket Included\u003cbr\u003eSimple Bolt -On Installation\u003cbr\u003eAll Necessary Hardware Included\u003cbr\u003eNote: Skunk2 ETBs are not modified OEM units and do NOT require swapping electric motors.\u003cbr\u003e\u003c\/p\u003e\n\u003c!--split--\u003e\n\u003cp\u003e0\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. 0\u003c\/p\u003e\n\u003c!--split--\u003e\n\u003cp\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic | EF9 | 1989-1991 | NA | B16A | I4\u003cbr\u003eCivic | EE9 | 1989-1991 | NA | B16A | I4\u003cbr\u003eCR-X | EF8 | 1989-1992 | NA | B16A | I4\u003cbr\u003eCR-X | EE8 | 1989-1992 | NA | B16A | I4\u003cbr\u003eCivic | EG6 | 1992-1995 | NA | B16A | I4\u003cbr\u003eCivic Ferio | EG9 | 1992-1995 | NA | B16A | I4\u003cbr\u003eCivic | EK4 | 1995-2000 | NA | B16A | I4\u003cbr\u003eCivic Type R | EK9 | 1997-2000 | NA | B16B | I4\u003cbr\u003eCivic Ferio | EK4 | 1995-2000 | NA | B16A | I4\u003cbr\u003eCR-X DELSOL | EG2 | 1992-1997 | NA | B16A | I4\u003cbr\u003eIntegra type R | DB8 | 1996-2001 | NA | B18C | I4\u003cbr\u003eIntegra type R | DC2 Zenki | 1996-1998 | NA | B18C | I4\u003cbr\u003eIntegra type R | DC2 Kouki | 1998-2001 | NA | B18C | I4\u003cbr\u003eCivic | EF3 | 1988-1991 | NA | ZC DOHC | I4\u003cbr\u003eCivic | EF5 | 1988-1991 | NA | ZC DOHC | I4\u003cbr\u003eCivic | ED7 | 1988-1991 | NA | D16A9 | I4\u003cbr\u003eCR-X | EF7 | 1988-1992 | NA | ZC DOHC | I4\u003cbr\u003eCR-X | ED9 | 1988-1992 | NA | D16A9 | I4\u003cbr\u003eCivic | EG4 | 1992-1995 | NA | D15B | I4\u003cbr\u003eCivic | EG5 | 1992-1995 | NA | D16Z6 | I4\u003cbr\u003eCivic Ferio | EG8 | 1992-1995 | NA | D15B | I4\u003cbr\u003eCivic | EK3 | 1995-2000 | NA | D15B | I4\u003cbr\u003eCivic Ferio | EK3 | 1995-2000 | NA | D15B | I4\u003cbr\u003eCivic | EU3 | 2000-2002 | NA | D17A | I4\u003cbr\u003eCivic | EU4 | 2000-2002 | NA | D17A | I4\u003cbr\u003eCivic Coupe | EJ1 | 1991-1995 | NA | D16A | I4\u003cbr\u003eCivic Coupe | EJ7 | 1996-2000 | NA | D16A | I4\u003cbr\u003eCivic Ferio | ES3 | 2000-2003 | NA | D17A | I4\u003cbr\u003eCivic Ferio | ET2 | 2000-2003 | NA | D17A | I4\u003cbr\u003eCR-X DELSOL | EJ4 | 1995-1997 | NA | D16A | I4\u003cbr\u003eCR-X DELSOL | EG1 | 1992-1997 | NA | D15B | I4\u003cbr\u003eAccord | CD6 | 1994-1997 | NA | H22A | I4\u003cbr\u003eAccord | CL3 | 1997-2001 | NA | H22A | I4\u003cbr\u003eAccord Torneo Euro R | CL1 | 2000-2002 | NA | H22A | I4\u003cbr\u003eAccord Euro R | CD8R | 1994-1997 | NA | H22A | I4\u003cbr\u003eAccord Wagon | CF2 | 1997-2001 | NA | H22A | I4\u003cbr\u003eAccord Wagon | CH9 | 1999-2002 | NA | H22A | I4\u003cbr\u003eAccord Wagon | CL2 | 2000-2002 | NA | H22A | I4\u003cbr\u003ePrelude | BB1 | 1991-1996 | NA | H22A | I4\u003cbr\u003ePrelude | BB4 | 1991-1996 | NA | H22A | I4\u003cbr\u003ePrelude | BB6 | 1996-2001 | NA | H22A | I4\u003cbr\u003ePrelude | BB8 | 1996-2001 | NA | H22A | I4\u003cbr\u003eAccord | CD4 | 1994-1997 | NA | F20B | I4\u003cbr\u003eAccord | CD5 | 1994-1997 | NA | F22B | I4\u003cbr\u003eAccord | CF5 | 1997-2001 | NA | F20B | I4\u003cbr\u003eAccord Torneo | CF3 | 1997-2001 | NA | F18B | I4\u003cbr\u003eAccord Torneo | CF4 | 1997-2001 | NA | F20B | I4\u003cbr\u003eAccord Torneo | CF5 | 1997-2001 | NA | F20B | I4\u003cbr\u003eAccord Torneo | CL3 | 1997-2001 | NA | F20B | I4\u003cbr\u003eAccord Coupe | CB6 | 1990-1994 | NA | F20A | I4\u003cbr\u003eAccord Coupe | CB7 | 1990-1994 | NA | F22A | I4\u003cbr\u003eAccord Euro R | CD7 | 1994-1997 | NA | F22B | I4\u003cbr\u003eAccord Wagon | CB9 | 1991-1994 | NA | F22A | I4\u003cbr\u003eAccord Wagon | CE1 | 1994-1997 | NA | F22B | I4\u003cbr\u003eAccord Wagon | CF6 | 1997-2001 | NA | F23A | I4\u003cbr\u003eAccord Wagon | CF7 | 1997-2001 | NA | F23A | I4\u003cbr\u003ePrelude | BB5 | 1996-2001 | NA | F22B | I4\u003cbr\u003ePrelude | BB7 | 1996-2001 | NA | F22B | I4\u003c\/p\u003e\n\u003c!--split--\u003e"}

{"id":1424933159009,"title":"Skunk 2 - DBW Throttle Body To Ultra Race Series Intake Manifold - Honda - K20 K24 F20C F22C (DBW)","handle":"dbw-throttle-body-to-ultra-race-series-intake-manifold-k20-k24-f20c-f22c-dbw-309-05-0010","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Skunk 2\u003cbr\u003eReference Number: 309-05-0010\u003cbr\u003eThrottle Body Diameter: \u003cbr\u003e\u003cbr\u003e\n\nSkunk2's all-new DBW throttle body adapter now offers '06-11 Honda Civic Type-R enthusiasts even more flexibility. Manufactured out of 6061-T6 billet aluminum '06-11 Honda Civic Type-R throttle body's can be bolted onto the new Ultra Race Series intake manifold.\n\nEnthusiasts now have a few options for throttle bodies. Each unique CNC-machined and hard-anodized throttle body adapter features 74mm opening recessed holes for easy adaptation and all necessary mounting hardware is included with each adapter making for an easy installation.\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAccord | CL9 | 2002-2008 | NA | K24A3 | I4\u003cbr\u003eAccord Wagon | CM2 | 2002-2005 | NA | K24A3 | I4\u003cbr\u003eCivic | FG2 | 2007-2009 | NA | K20Z3 | I4\u003cbr\u003eCivic | FN2 | 2009-2012 | NA | K20A | I4\u003cbr\u003eCivic Type R Euro | FN2R | 2009-2012 | NA | K20A | I4\u003cbr\u003eCivic Type R | FD2R | 2007-2010 | NA | K20A | I4\u003cbr\u003eS2000 | AP1 | 1999-2003 | NA | F20C | I4\u003cbr\u003eS2000 | AP2 | 2003-2009 | NA | F22C | I4\u003c!--split--\u003e","published_at":"2025-04-14T11:25:51+08:00","created_at":"2018-09-02T20:55:29+08:00","vendor":"Skunk 2","type":"Throttle Bodies","tags":["1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","accord-cl9-2002-2008-na-k24a3-i4","accord-wagon-cm2-2002-2005-na-k24a3-i4","civic-fg2-2007-2009-na-k20z3-i4","civic-fn2-2009-2012-na-k20a-i4","civic-type-r-euro-fn2r-2009-2012-na-k20a-i4","civic-type-r-fd2r-2007-2010-na-k20a-i4","honda","intake","s2000-ap1-1999-2003-na-f20c-i4","s2000-ap2-2003-2009-na-f22c-i4","skunk-2","throttle-body-adapter","US1","ws17"],"price":9940,"price_min":9940,"price_max":9940,"available":true,"price_varies":false,"compare_at_price":10000,"compare_at_price_min":10000,"compare_at_price_max":10000,"compare_at_price_varies":false,"variants":[{"id":12418396192865,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"309-05-0010","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skunk 2 - DBW Throttle Body To Ultra Race Series Intake Manifold - Honda - K20 K24 F20C F22C (DBW)","public_title":null,"options":["Default Title"],"price":9940,"weight":4544,"compare_at_price":10000,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/309-05-0010.jpg?v=1710167455"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/309-05-0010.jpg?v=1710167455","options":["Title"],"media":[{"alt":"DBW Throttle Body To Ultra Race Series Intake Manifold - K20 K24 F20C F22C (DBW) - 309-05-0010","id":25426646204598,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/309-05-0010.jpg?v=1710167455"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/309-05-0010.jpg?v=1710167455","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Skunk 2\u003cbr\u003eReference Number: 309-05-0010\u003cbr\u003eThrottle Body Diameter: \u003cbr\u003e\u003cbr\u003e\n\nSkunk2's all-new DBW throttle body adapter now offers '06-11 Honda Civic Type-R enthusiasts even more flexibility. Manufactured out of 6061-T6 billet aluminum '06-11 Honda Civic Type-R throttle body's can be bolted onto the new Ultra Race Series intake manifold.\n\nEnthusiasts now have a few options for throttle bodies. Each unique CNC-machined and hard-anodized throttle body adapter features 74mm opening recessed holes for easy adaptation and all necessary mounting hardware is included with each adapter making for an easy installation.\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAccord | CL9 | 2002-2008 | NA | K24A3 | I4\u003cbr\u003eAccord Wagon | CM2 | 2002-2005 | NA | K24A3 | I4\u003cbr\u003eCivic | FG2 | 2007-2009 | NA | K20Z3 | I4\u003cbr\u003eCivic | FN2 | 2009-2012 | NA | K20A | I4\u003cbr\u003eCivic Type R Euro | FN2R | 2009-2012 | NA | K20A | I4\u003cbr\u003eCivic Type R | FD2R | 2007-2010 | NA | K20A | I4\u003cbr\u003eS2000 | AP1 | 1999-2003 | NA | F20C | I4\u003cbr\u003eS2000 | AP2 | 2003-2009 | NA | F22C | I4\u003c!--split--\u003e"}

{"id":1424933388385,"title":"Skunk 2 - Pro Series Intake Manifold K Series ( Black Series) - Honda","handle":"pro-series-intake-manifold-k-series-black-series-k20a-k20z-307-05-0325","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Skunk 2\u003cbr\u003eReference Number: 307-05-0325\u003cbr\u003eIntake Type: Intake Manifold\u003cbr\u003e\u003cbr\u003eSkunk2s engineers went back to the drawing board when they set out to improve the already popular 06-11 Civic Si’s RBC intake manifold. Each of Skunk2’s Pro Series Intake Manifolds for Honda’s K-series engines feature larger plenums and shorter, oversized runners when compared to the RBC, and are cast with thicker wall material, leaving room for further porting for high-horsepower applications. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, Pro Series manifolds were designed for the “street enthusiast” who wants more power but doesn’t want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains.\u003cbr\u003e\u003cbr\u003eManufacturer Note:\u003cbr\u003e72mm Tb Opening, Can Be Inlet Matched To 76mm\u003cbr\u003eMid Range To Top End Gains.\u003cbr\u003ePowdercoated Black\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAccord Euro R | CL7 | 2002-2008 | NA | K20A | I4\u003cbr\u003eAccord | CL8 | 2002-2005 | NA | K20A | I4\u003cbr\u003eAccord Wagon | CM1 | 2004-2005 | NA | K20A | I4\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003cbr\u003eCR-V | RD4 | 2002-2006 | NA | K20A | I4\u003cbr\u003eCR-V | RD5 | 2002-2006 | NA | K20A | I4\u003cbr\u003eEdix | BE3 | 2004-2006 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Zenki | 2002-2004 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Kouki | 2004-2006 | NA | K20A | I4\u003cbr\u003eIntegra | DC5 | 2002-2006 | NA | K20Z1 | I4\u003c!--split--\u003e","published_at":"2018-09-02T20:55:40+08:00","created_at":"2018-09-02T20:55:40+08:00","vendor":"Skunk 2","type":"Intake Manifolds","tags":["2007","2008","2009","civic-fg2-2007-2009-na-k20z3-i4","honda","intake","intake-manifold","intake-manifolds","manifolds","skunk-2","US1","ws17"],"price":72070,"price_min":72070,"price_max":72070,"available":true,"price_varies":false,"compare_at_price":72300,"compare_at_price_min":72300,"compare_at_price_max":72300,"compare_at_price_varies":false,"variants":[{"id":12418396422241,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"307-05-0325","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skunk 2 - Pro Series Intake Manifold K Series ( Black Series) - Honda","public_title":null,"options":["Default Title"],"price":72070,"weight":10895,"compare_at_price":72300,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/307-05-0325.jpg?v=1710167460"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/307-05-0325.jpg?v=1710167460","options":["Title"],"media":[{"alt":"Pro Series Intake Manifold K Series ( Black Series) - K20A\/K20Z - 307-05-0325","id":25426647089334,"position":1,"preview_image":{"aspect_ratio":1.173,"height":358,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/307-05-0325.jpg?v=1710167460"},"aspect_ratio":1.173,"height":358,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/307-05-0325.jpg?v=1710167460","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Skunk 2\u003cbr\u003eReference Number: 307-05-0325\u003cbr\u003eIntake Type: Intake Manifold\u003cbr\u003e\u003cbr\u003eSkunk2s engineers went back to the drawing board when they set out to improve the already popular 06-11 Civic Si’s RBC intake manifold. Each of Skunk2’s Pro Series Intake Manifolds for Honda’s K-series engines feature larger plenums and shorter, oversized runners when compared to the RBC, and are cast with thicker wall material, leaving room for further porting for high-horsepower applications. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, Pro Series manifolds were designed for the “street enthusiast” who wants more power but doesn’t want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains.\u003cbr\u003e\u003cbr\u003eManufacturer Note:\u003cbr\u003e72mm Tb Opening, Can Be Inlet Matched To 76mm\u003cbr\u003eMid Range To Top End Gains.\u003cbr\u003ePowdercoated Black\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAccord Euro R | CL7 | 2002-2008 | NA | K20A | I4\u003cbr\u003eAccord | CL8 | 2002-2005 | NA | K20A | I4\u003cbr\u003eAccord Wagon | CM1 | 2004-2005 | NA | K20A | I4\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003cbr\u003eCR-V | RD4 | 2002-2006 | NA | K20A | I4\u003cbr\u003eCR-V | RD5 | 2002-2006 | NA | K20A | I4\u003cbr\u003eEdix | BE3 | 2004-2006 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Zenki | 2002-2004 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Kouki | 2004-2006 | NA | K20A | I4\u003cbr\u003eIntegra | DC5 | 2002-2006 | NA | K20Z1 | I4\u003c!--split--\u003e"}

{"id":1424933355617,"title":"Skunk 2 - Pro Series Intake Manifold K Series - Honda","handle":"pro-series-intake-manifold-k-series-k20a-k20z-307-05-0320","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Skunk 2\u003cbr\u003eReference Number: 307-05-0320\u003cbr\u003eIntake Type: Intake Manifold\u003cbr\u003e\u003cbr\u003eSkunk2s engineers went back to the drawing board when they set out to improve the already popular 06-11 Civic Si’s RBC intake manifold. Each of Skunk2’s Pro Series Intake Manifolds for Honda’s K-series engines feature larger plenums and shorter, oversized runners when compared to the RBC, and are cast with thicker wall material, leaving room for further porting for high-horsepower applications. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, Pro Series manifolds were designed for the “street enthusiast” who wants more power but doesn’t want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains.\u003cbr\u003e\u003cbr\u003eManufacturer Note:\u003cbr\u003e72mm Tb Opening, Can Be Inlet Matched To 76mm\u003cbr\u003eMid Range To Top End Gains. \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAccord Euro R | CL7 | 2002-2008 | NA | K20A | I4\u003cbr\u003eAccord | CL8 | 2002-2005 | NA | K20A | I4\u003cbr\u003eAccord Wagon | CM1 | 2004-2005 | NA | K20A | I4\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003cbr\u003eCR-V | RD4 | 2002-2006 | NA | K20A | I4\u003cbr\u003eCR-V | RD5 | 2002-2006 | NA | K20A | I4\u003cbr\u003eEdix | BE3 | 2004-2006 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Zenki | 2002-2004 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Kouki | 2004-2006 | NA | K20A | I4\u003cbr\u003eIntegra | DC5 | 2002-2006 | NA | K20Z1 | I4\u003c!--split--\u003e","published_at":"2025-04-14T11:25:51+08:00","created_at":"2018-09-02T20:55:39+08:00","vendor":"Skunk 2","type":"Intake Manifolds","tags":["2007","2008","2009","civic-fg2-2007-2009-na-k20z3-i4","honda","intake","intake-manifold","intake-manifolds","manifolds","skunk-2","US1","ws17"],"price":66890,"price_min":66890,"price_max":66890,"available":true,"price_varies":false,"compare_at_price":67100,"compare_at_price_min":67100,"compare_at_price_max":67100,"compare_at_price_varies":false,"variants":[{"id":12418396389473,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"307-05-0320","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skunk 2 - Pro Series Intake Manifold K Series - Honda","public_title":null,"options":["Default Title"],"price":66890,"weight":11076,"compare_at_price":67100,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/307-05-0320.jpg?v=1710167460"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/307-05-0320.jpg?v=1710167460","options":["Title"],"media":[{"alt":"Pro Series Intake Manifold K Series - K20A\/K20Z - 307-05-0320","id":25426647056566,"position":1,"preview_image":{"aspect_ratio":1.156,"height":692,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/307-05-0320.jpg?v=1710167460"},"aspect_ratio":1.156,"height":692,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/307-05-0320.jpg?v=1710167460","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Skunk 2\u003cbr\u003eReference Number: 307-05-0320\u003cbr\u003eIntake Type: Intake Manifold\u003cbr\u003e\u003cbr\u003eSkunk2s engineers went back to the drawing board when they set out to improve the already popular 06-11 Civic Si’s RBC intake manifold. Each of Skunk2’s Pro Series Intake Manifolds for Honda’s K-series engines feature larger plenums and shorter, oversized runners when compared to the RBC, and are cast with thicker wall material, leaving room for further porting for high-horsepower applications. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, Pro Series manifolds were designed for the “street enthusiast” who wants more power but doesn’t want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains.\u003cbr\u003e\u003cbr\u003eManufacturer Note:\u003cbr\u003e72mm Tb Opening, Can Be Inlet Matched To 76mm\u003cbr\u003eMid Range To Top End Gains. \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAccord Euro R | CL7 | 2002-2008 | NA | K20A | I4\u003cbr\u003eAccord | CL8 | 2002-2005 | NA | K20A | I4\u003cbr\u003eAccord Wagon | CM1 | 2004-2005 | NA | K20A | I4\u003cbr\u003eCivic Type R | EP3 | 2001-2005 | NA | K20A | I4\u003cbr\u003eCR-V | RD4 | 2002-2006 | NA | K20A | I4\u003cbr\u003eCR-V | RD5 | 2002-2006 | NA | K20A | I4\u003cbr\u003eEdix | BE3 | 2004-2006 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Zenki | 2002-2004 | NA | K20A | I4\u003cbr\u003eIntegra type R | DC5R Kouki | 2004-2006 | NA | K20A | I4\u003cbr\u003eIntegra | DC5 | 2002-2006 | NA | K20Z1 | I4\u003c!--split--\u003e"}

{"id":7027795198134,"title":"Skunk2 Pro Series 06-10 Honda Civic Si (K20Z3) Intake Manifold (Race Only)","handle":"skunk2-pro-series-06-10-honda-civic-si-k20z3-intake-manifold-race-only-307-05-0320","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Skunk 2\u003cbr\u003eReference Number: 307-05-0320\u003cbr\u003eIntake Type: Intake Manifold\u003cbr\u003e\u003cbr\u003eSkunk2's engineers went back to the drawing board when they set out to improve the already popular '06-'11 Civic Si’s RBC intake manifold. Each of Skunk2’s Pro Series Intake Manifolds for Honda’s K-series engines feature larger plenums and shorter, oversized runners when compared to the RBC, and are cast with thicker wall material, leaving room for further porting for high-horsepower applications. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, Pro Series manifolds were designed for the “street enthusiast” who wants more power but doesn’t want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains. Skunk2’s all-new, cast-aluminum Pro Series Intake Manifolds for Honda’s K-series engines are a direct-fit replacement for all '06-'11 Civic Si engines thanks to their unique design and throttle body flanges, which are compatible with OEM throttle bodies as well as those as large as 76mm. A thermal-insulated intake manifold gasket is also included, making for a truly bolt-on installation (no drilling or modifying required). Pro Series manifolds also incorporate an angled-runner design, which allows for ample hood clearance on almost any engine combination. Pro Series Intake Manifolds offer horsepower and torque gains greater than the popular RBC manifold but without compromising mid-range power output. The design incorporates runners that are similar in length to the RBC’s but with larger bores, a special tapered design, as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined and hand-finished to best match the cylinder head’s ports. Skunk2’s Pro Series Intake Manifold’s shape and design also increases wave scavenging effects at the engine’s ideal operating range, which allow for a broad increase in usable power. Skunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2’s Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality. Each manifold is molded with smooth transitions from the throttle body opening to the plenum to the runners with clean parting lines for an optimal finish, both inside and out and features a genuine Skunk2 nameplate. \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic | FG2 | 2007-2009 | NA | K20Z3 | I4\u003c!--split--\u003e","published_at":"2025-04-14T11:25:52+08:00","created_at":"2021-09-15T18:05:48+08:00","vendor":"Skunk 2","type":"Intake Manifolds","tags":["2007","2008","2009","civic-fg2-2007-2009-na-k20z3-i4","honda","intake","intake-manifold","intake-manifolds","manifolds","skunk-2","US1","ws17"],"price":66890,"price_min":66890,"price_max":66890,"available":true,"price_varies":false,"compare_at_price":67100,"compare_at_price_min":67100,"compare_at_price_max":67100,"compare_at_price_varies":false,"variants":[{"id":40574035919030,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"307-05-0320","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skunk2 Pro Series 06-10 Honda Civic Si (K20Z3) Intake Manifold (Race Only)","public_title":null,"options":["Default Title"],"price":66890,"weight":11076,"compare_at_price":67100,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-pro-series-06-10-honda-civic-si-k20z3-intake-manifold-race-only-rzcrew.jpg?v=1710323768"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-pro-series-06-10-honda-civic-si-k20z3-intake-manifold-race-only-rzcrew.jpg?v=1710323768","options":["Title"],"media":[{"alt":"Skunk2 Pro Series 06-10 Honda Civic Si (K20Z3) Intake Manifold (Race Only) - 307-05-0320","id":25426647777462,"position":1,"preview_image":{"aspect_ratio":1.332,"height":488,"width":650,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-pro-series-06-10-honda-civic-si-k20z3-intake-manifold-race-only-rzcrew.jpg?v=1710323768"},"aspect_ratio":1.332,"height":488,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-pro-series-06-10-honda-civic-si-k20z3-intake-manifold-race-only-rzcrew.jpg?v=1710323768","width":650}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Skunk 2\u003cbr\u003eReference Number: 307-05-0320\u003cbr\u003eIntake Type: Intake Manifold\u003cbr\u003e\u003cbr\u003eSkunk2's engineers went back to the drawing board when they set out to improve the already popular '06-'11 Civic Si’s RBC intake manifold. Each of Skunk2’s Pro Series Intake Manifolds for Honda’s K-series engines feature larger plenums and shorter, oversized runners when compared to the RBC, and are cast with thicker wall material, leaving room for further porting for high-horsepower applications. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, Pro Series manifolds were designed for the “street enthusiast” who wants more power but doesn’t want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains. Skunk2’s all-new, cast-aluminum Pro Series Intake Manifolds for Honda’s K-series engines are a direct-fit replacement for all '06-'11 Civic Si engines thanks to their unique design and throttle body flanges, which are compatible with OEM throttle bodies as well as those as large as 76mm. A thermal-insulated intake manifold gasket is also included, making for a truly bolt-on installation (no drilling or modifying required). Pro Series manifolds also incorporate an angled-runner design, which allows for ample hood clearance on almost any engine combination. Pro Series Intake Manifolds offer horsepower and torque gains greater than the popular RBC manifold but without compromising mid-range power output. The design incorporates runners that are similar in length to the RBC’s but with larger bores, a special tapered design, as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined and hand-finished to best match the cylinder head’s ports. Skunk2’s Pro Series Intake Manifold’s shape and design also increases wave scavenging effects at the engine’s ideal operating range, which allow for a broad increase in usable power. Skunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2’s Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality. Each manifold is molded with smooth transitions from the throttle body opening to the plenum to the runners with clean parting lines for an optimal finish, both inside and out and features a genuine Skunk2 nameplate. \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic | FG2 | 2007-2009 | NA | K20Z3 | I4\u003c!--split--\u003e"}

{"id":7027795263670,"title":"Skunk2 Pro Series 06-10 Honda Civic Si (K20Z3) Intake Manifold (Race Only) (Black Series)","handle":"skunk2-pro-series-06-10-honda-civic-si-k20z3-intake-manifold-race-only-black-series-307-05-0325","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Skunk 2\u003cbr\u003eReference Number: 307-05-0325\u003cbr\u003eIntake Type: Intake Manifold\u003cbr\u003e\u003cbr\u003eSkunk2's engineers went back to the drawing board when they set out to improve the already popular '06-'11 Civic Si’s RBC intake manifold. Each of Skunk2’s Pro Series Intake Manifolds for Honda’s K-series engines feature larger plenums and shorter, oversized runners when compared to the RBC, and are cast with thicker wall material, leaving room for further porting for high-horsepower applications. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, Pro Series manifolds were designed for the “street enthusiast” who wants more power but doesn’t want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains. Skunk2’s all-new, cast-aluminum Pro Series Intake Manifolds for Honda’s K-series engines are a direct-fit replacement for all '06-'11 Civic Si engines thanks to their unique design and throttle body flanges, which are compatible with OEM throttle bodies as well as those as large as 76mm. A thermal-insulated intake manifold gasket is also included, making for a truly bolt-on installation (no drilling or modifying required). Pro Series manifolds also incorporate an angled-runner design, which allows for ample hood clearance on almost any engine combination. Pro Series Intake Manifolds offer horsepower and torque gains greater than the popular RBC manifold but without compromising mid-range power output. The design incorporates runners that are similar in length to the RBC’s but with larger bores, a special tapered design, as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined and hand-finished to best match the cylinder head’s ports. Skunk2’s Pro Series Intake Manifold’s shape and design also increases wave scavenging effects at the engine’s ideal operating range, which allow for a broad increase in usable power. Skunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2’s Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality. Each manifold is molded with smooth transitions from the throttle body opening to the plenum to the runners with clean parting lines for an optimal finish, both inside and out and features a genuine Skunk2 nameplate. \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic | FG2 | 2007-2009 | NA | K20Z3 | I4\u003c!--split--\u003e","published_at":"2021-09-15T18:05:49+08:00","created_at":"2021-09-15T18:05:50+08:00","vendor":"Skunk 2","type":"Intake Manifolds","tags":["2007","2008","2009","civic-fg2-2007-2009-na-k20z3-i4","honda","intake","intake-manifold","intake-manifolds","manifolds","skunk-2","US1","ws17"],"price":72070,"price_min":72070,"price_max":72070,"available":true,"price_varies":false,"compare_at_price":72300,"compare_at_price_min":72300,"compare_at_price_max":72300,"compare_at_price_varies":false,"variants":[{"id":40574035984566,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"307-05-0325","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skunk2 Pro Series 06-10 Honda Civic Si (K20Z3) Intake Manifold (Race Only) (Black Series)","public_title":null,"options":["Default Title"],"price":72070,"weight":10895,"compare_at_price":72300,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-pro-series-06-10-honda-civic-si-k20z3-intake-manifold-race-only-black-series-rzcrew.jpg?v=1710323769"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-pro-series-06-10-honda-civic-si-k20z3-intake-manifold-race-only-black-series-rzcrew.jpg?v=1710323769","options":["Title"],"media":[{"alt":"Skunk2 Pro Series 06-10 Honda Civic Si (K20Z3) Intake Manifold (Race Only) (Black Series) - 307-05-0325","id":25426647875766,"position":1,"preview_image":{"aspect_ratio":1.332,"height":488,"width":650,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-pro-series-06-10-honda-civic-si-k20z3-intake-manifold-race-only-black-series-rzcrew.jpg?v=1710323769"},"aspect_ratio":1.332,"height":488,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-pro-series-06-10-honda-civic-si-k20z3-intake-manifold-race-only-black-series-rzcrew.jpg?v=1710323769","width":650}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Skunk 2\u003cbr\u003eReference Number: 307-05-0325\u003cbr\u003eIntake Type: Intake Manifold\u003cbr\u003e\u003cbr\u003eSkunk2's engineers went back to the drawing board when they set out to improve the already popular '06-'11 Civic Si’s RBC intake manifold. Each of Skunk2’s Pro Series Intake Manifolds for Honda’s K-series engines feature larger plenums and shorter, oversized runners when compared to the RBC, and are cast with thicker wall material, leaving room for further porting for high-horsepower applications. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, Pro Series manifolds were designed for the “street enthusiast” who wants more power but doesn’t want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains. Skunk2’s all-new, cast-aluminum Pro Series Intake Manifolds for Honda’s K-series engines are a direct-fit replacement for all '06-'11 Civic Si engines thanks to their unique design and throttle body flanges, which are compatible with OEM throttle bodies as well as those as large as 76mm. A thermal-insulated intake manifold gasket is also included, making for a truly bolt-on installation (no drilling or modifying required). Pro Series manifolds also incorporate an angled-runner design, which allows for ample hood clearance on almost any engine combination. Pro Series Intake Manifolds offer horsepower and torque gains greater than the popular RBC manifold but without compromising mid-range power output. The design incorporates runners that are similar in length to the RBC’s but with larger bores, a special tapered design, as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined and hand-finished to best match the cylinder head’s ports. Skunk2’s Pro Series Intake Manifold’s shape and design also increases wave scavenging effects at the engine’s ideal operating range, which allow for a broad increase in usable power. Skunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2’s Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality. Each manifold is molded with smooth transitions from the throttle body opening to the plenum to the runners with clean parting lines for an optimal finish, both inside and out and features a genuine Skunk2 nameplate. \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCivic | FG2 | 2007-2009 | NA | K20Z3 | I4\u003c!--split--\u003e"}