Conrods Kit

{"id":7364686610614,"title":"Skunk2 Alpha Series Honda K20A\/Z Connecting Rods","handle":"skunk2-alpha-series-honda-k20a-z-connecting-rods-306-05-1140","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Skunk 2\u003cbr\u003eReference Number: 306-05-1140\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAlpha Series Rods are forged from select 4340 chromoly steel and feature a straight H-beam design, resulting in the ultimate strength-to-weight ratio. 4340 chromoly is one of the strongest materials available, however, not all 4340 chromoly is the same. As such, Skunk2 relies on extensive material testing and works closely with its foundry to produce high-quality rods at an affordable price. Comprehensive heat-treating, tempering, and shot-peening processes together ensure that each Alpha Series Rod remains consistent and strong. Finally, each rod is magna-fluxed to ensure integrity and that each process has been completed thoroughly and according to Skunk2’s rigid specifications.\n\n \n\nSkunk2’s engineers spent nearly three years developing and testing its straight H-beam rod design. The results are one of the strongest beam configurations available, capable of handling more than 900 hp. Engineers made use of FEA (Finite Element Analysis) to determine high-stress points and implemented features to reduce wear and increase strength. Skunk2’s straight design distributes stress across a larger area when compared to tapered rods, providing additional support where necessary.\n\n \n\nAlpha Series Rods are manufactured from two-piece forgings, resulting in optimal grain orientation along the rod cap for increased strength. By orienting the metal’s grain in the direction of stress along the rod cap, perpendicular to the stress exerted along the beam, strength is significantly increased. Skunk2’s two-piece forgings provide a precision-tight fit between the rod’s cap and its beam without resorting to the brittle materials required by other processes.\n\n \n\nAlpha Series Rods also feature dual oil passages at their pin ends, providing additional lubrication and cooling, which leads to an even stronger, more durable rod. Unlike other designs, Skunk2’s carefully positioned, offset oil passages help deliver lubrication around the entire wrist pin, during each phase of the engine cycle.\n\n \n\nConnecting rod bolts endure more stress than any other engine fastener. Each Alpha Series Rod features high-quality, Skunk2-branded, 3\/8-inch ARP2000 bolts. ARP2000 rod bolts are forged, heat-treated, precision-machined, and capable of clamping loads as high as 220,000 psi. Precision-machined, bronze wrist pin bushings are also fitted to each Alpha Series Rod for increased wear resistance, and are compatible with most aftermarket pistons without additional machining.\n\n \n\nNot all forged H-beam rods are the same. Only Skunk2’s Alpha Series Rods feature our unique design, precision machining, and are capable of handling more than 900 hp, all at an economical price.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 1 left in stock!\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eK20A | 2000cc | DOHC | 16v | NA | I4,K20A2 | 2000cc | DOHC | 16v | NA | I4,K20A3 | 2000cc | DOHC | 16v | NA | I4,K20Z1 | 2000cc | DOHC | 16v | NA | I4,K20Z2 | 2000cc | DOHC | 16v | NA | I4,K20Z3 | 2000cc | DOHC | 16v | NA | I4,K20Z4 | 2000cc | DOHC | 16v | NA | I4\u003c!--split--\u003e","published_at":"2022-06-10T12:00:07+08:00","created_at":"2022-06-10T11:55:44+08:00","vendor":"Skunk 2","type":"Build Your Block","tags":["build-your-block","civic-fd2-2007-2010-na-k20z2-i4","conrods-kit","honda","k20a-2000cc-dohc-16v-na-i4","k20a2-2000cc-dohc-16v-na-i4","k20a3-2000cc-dohc-16v-na-i4","k20z1-2000cc-dohc-16v-na-i4","k20z2-2000cc-dohc-16v-na-i4","k20z3-2000cc-dohc-16v-na-i4","k20z4-2000cc-dohc-16v-na-i4","skunk-2","us1","ws17"],"price":53289,"price_min":53289,"price_max":53289,"available":true,"price_varies":false,"compare_at_price":57300,"compare_at_price_min":57300,"compare_at_price_max":57300,"compare_at_price_varies":false,"variants":[{"id":41537301119158,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"306-05-1140","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skunk2 Alpha Series Honda K20A\/Z Connecting Rods","public_title":null,"options":["Default Title"],"price":53289,"weight":6313,"compare_at_price":57300,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-alpha-series-honda-k20az-connecting-rods-rzcrew.jpg?v=1710320623"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-alpha-series-honda-k20az-connecting-rods-rzcrew.jpg?v=1710320623","options":["Title"],"media":[{"alt":"Skunk2 Alpha Series Honda K20A\/Z Connecting Rods - 306-05-1140","id":24388929880246,"position":1,"preview_image":{"aspect_ratio":1.332,"height":488,"width":650,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-alpha-series-honda-k20az-connecting-rods-rzcrew.jpg?v=1710320623"},"aspect_ratio":1.332,"height":488,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-alpha-series-honda-k20az-connecting-rods-rzcrew.jpg?v=1710320623","width":650}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Skunk 2\u003cbr\u003eReference Number: 306-05-1140\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAlpha Series Rods are forged from select 4340 chromoly steel and feature a straight H-beam design, resulting in the ultimate strength-to-weight ratio. 4340 chromoly is one of the strongest materials available, however, not all 4340 chromoly is the same. As such, Skunk2 relies on extensive material testing and works closely with its foundry to produce high-quality rods at an affordable price. Comprehensive heat-treating, tempering, and shot-peening processes together ensure that each Alpha Series Rod remains consistent and strong. Finally, each rod is magna-fluxed to ensure integrity and that each process has been completed thoroughly and according to Skunk2’s rigid specifications.\n\n \n\nSkunk2’s engineers spent nearly three years developing and testing its straight H-beam rod design. The results are one of the strongest beam configurations available, capable of handling more than 900 hp. Engineers made use of FEA (Finite Element Analysis) to determine high-stress points and implemented features to reduce wear and increase strength. Skunk2’s straight design distributes stress across a larger area when compared to tapered rods, providing additional support where necessary.\n\n \n\nAlpha Series Rods are manufactured from two-piece forgings, resulting in optimal grain orientation along the rod cap for increased strength. By orienting the metal’s grain in the direction of stress along the rod cap, perpendicular to the stress exerted along the beam, strength is significantly increased. Skunk2’s two-piece forgings provide a precision-tight fit between the rod’s cap and its beam without resorting to the brittle materials required by other processes.\n\n \n\nAlpha Series Rods also feature dual oil passages at their pin ends, providing additional lubrication and cooling, which leads to an even stronger, more durable rod. Unlike other designs, Skunk2’s carefully positioned, offset oil passages help deliver lubrication around the entire wrist pin, during each phase of the engine cycle.\n\n \n\nConnecting rod bolts endure more stress than any other engine fastener. Each Alpha Series Rod features high-quality, Skunk2-branded, 3\/8-inch ARP2000 bolts. ARP2000 rod bolts are forged, heat-treated, precision-machined, and capable of clamping loads as high as 220,000 psi. Precision-machined, bronze wrist pin bushings are also fitted to each Alpha Series Rod for increased wear resistance, and are compatible with most aftermarket pistons without additional machining.\n\n \n\nNot all forged H-beam rods are the same. Only Skunk2’s Alpha Series Rods feature our unique design, precision machining, and are capable of handling more than 900 hp, all at an economical price.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 1 left in stock!\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eK20A | 2000cc | DOHC | 16v | NA | I4,K20A2 | 2000cc | DOHC | 16v | NA | I4,K20A3 | 2000cc | DOHC | 16v | NA | I4,K20Z1 | 2000cc | DOHC | 16v | NA | I4,K20Z2 | 2000cc | DOHC | 16v | NA | I4,K20Z3 | 2000cc | DOHC | 16v | NA | I4,K20Z4 | 2000cc | DOHC | 16v | NA | I4\u003c!--split--\u003e"}

{"id":456841723931,"title":"Brian Crower - Honda R18 (JDM\/Euro Civic 06+) - Sportsman w\/ARP2000 Fasteners Forged Conrods Kit","handle":"brian-crower-honda-r18-jdm-euro-civic-06-sportsman-w-arp2000-fasteners-forged-conrods-kit-bc6008-bc6008","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Brian Crower\u003cbr\u003eReference Number: BC6008\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eMade from premium, 4340 steel billet material, Brian Crower connecting rods are available in two distinct styles depending on horsepower, budget and engine application, but both include the exclusive Brian Crower oiling groove in the pin bushing for added oiling. The bROD Series is intended for moderate boost applications and all motor race applications where peak horsepower is not going to exceed 700 at the flywheel. Utilizes venerable ARP2000 fasteners. The BC625+ Series rods are designed for high horsepower, high boost and extreme rpm applications where nothing but the best rod will do. Features include ARP's premium Custom Age 625+ bolt rated to 280,000 p.s.i. for ultimate fastening capabilities as well as aluminum-bronze bushings to insure long, reliable service, no matter what the boost, nitrous or RPM.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 1 left in stock!\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eR18Z | 1800cc | SOHC | 16v | NA | I4,R18A | 1800cc | SOHC | 16v | NA | I4\u003c!--split--\u003e","published_at":"2017-12-18T20:20:55+08:00","created_at":"2017-12-18T20:20:55+08:00","vendor":"Brian Crower","type":"Build Your Block","tags":["brian-crower","build-your-block","conrods-kit","honda","r18a-1800cc-sohc-16v-na-i4","r18z-1800cc-sohc-16v-na-i4","us1","ws110"],"price":71190,"price_min":71190,"price_max":71190,"available":true,"price_varies":false,"compare_at_price":79100,"compare_at_price_min":79100,"compare_at_price_max":79100,"compare_at_price_varies":false,"variants":[{"id":5337142558747,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BC6008","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Brian Crower - Honda R18 (JDM\/Euro Civic 06+) - Sportsman w\/ARP2000 Fasteners Forged Conrods Kit","public_title":null,"options":["Default Title"],"price":71190,"weight":6449,"compare_at_price":79100,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/bRIAN_cROWER_CONROD_4aa2af42-0e28-4a59-ae26-585593e88a5c.jpg?v=1710153700"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/bRIAN_cROWER_CONROD_4aa2af42-0e28-4a59-ae26-585593e88a5c.jpg?v=1710153700","options":["Title"],"media":[{"alt":"Brian Crower - Honda R18 (JDM\/Euro Civic 06+) - Sportsman w\/ARP2000 Fasteners Forged Conrods Kit - BC6008 - BC6008","id":22936422875318,"position":1,"preview_image":{"aspect_ratio":2.66,"height":188,"width":500,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/bRIAN_cROWER_CONROD_4aa2af42-0e28-4a59-ae26-585593e88a5c.jpg?v=1710153700"},"aspect_ratio":2.66,"height":188,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/bRIAN_cROWER_CONROD_4aa2af42-0e28-4a59-ae26-585593e88a5c.jpg?v=1710153700","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Brian Crower\u003cbr\u003eReference Number: BC6008\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eMade from premium, 4340 steel billet material, Brian Crower connecting rods are available in two distinct styles depending on horsepower, budget and engine application, but both include the exclusive Brian Crower oiling groove in the pin bushing for added oiling. The bROD Series is intended for moderate boost applications and all motor race applications where peak horsepower is not going to exceed 700 at the flywheel. Utilizes venerable ARP2000 fasteners. The BC625+ Series rods are designed for high horsepower, high boost and extreme rpm applications where nothing but the best rod will do. Features include ARP's premium Custom Age 625+ bolt rated to 280,000 p.s.i. for ultimate fastening capabilities as well as aluminum-bronze bushings to insure long, reliable service, no matter what the boost, nitrous or RPM.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 1 left in stock!\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eR18Z | 1800cc | SOHC | 16v | NA | I4,R18A | 1800cc | SOHC | 16v | NA | I4\u003c!--split--\u003e"}

{"id":456840675355,"title":"Brian Crower - Forged Connecting Rods kit with ARP 625+ Fasteners - Honda - B16A","handle":"brian-crower-forged-connecting-rods-kit-with-arp-625-fasteners-honda-b16a-bc6028-bc6028","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Brian Crower\u003cbr\u003eReference Number: BC6028\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eMade from premium, 4340 steel billet material, Brian Crower connecting rods are available in two distinct styles depending on horsepower, budget and engine application, but both include the exclusive Brian Crower oiling groove in the pin bushing for added oiling. The bROD Series is intended for moderate boost applications and all motor race applications where peak horsepower is not going to exceed 700 at the flywheel. Utilizes venerable ARP2000 fasteners. The BC625+ Series rods are designed for high horsepower, high boost and extreme rpm applications where nothing but the best rod will do. Features include ARP's premium Custom Age 625+ bolt rated to 280,000 p.s.i. for ultimate fastening capabilities as well as aluminum-bronze bushings to insure long, reliable service, no matter what the boost, nitrous or RPM.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eB16A1 | 1600cc | DOHC | 16v | NA | I4,B16A2 | 1600cc | DOHC | 16v | NA | I4,B16A3 | 1600cc | DOHC | 16v | NA | I4,B16A4 | 1600cc | DOHC | 16v | NA | I4,B16A5 | 1600cc | DOHC | 16v | NA | I4,B16A6 | 1600cc | DOHC | 16v | NA | I4\u003c!--split--\u003e","published_at":"2017-12-18T20:20:44+08:00","created_at":"2017-12-18T20:20:45+08:00","vendor":"Brian Crower","type":"Build Your Block","tags":["b16a1-1600cc-dohc-16v-na-i4","b16a2-1600cc-dohc-16v-na-i4","b16a3-1600cc-dohc-16v-na-i4","b16a4-1600cc-dohc-16v-na-i4","b16a5-1600cc-dohc-16v-na-i4","b16a6-1600cc-dohc-16v-na-i4","brian-crower","build-your-block","conrods-kit","honda","us1","ws110"],"price":106200,"price_min":106200,"price_max":106200,"available":true,"price_varies":false,"compare_at_price":118000,"compare_at_price_min":118000,"compare_at_price_max":118000,"compare_at_price_varies":false,"variants":[{"id":5337135513627,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BC6028","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Brian Crower - Forged Connecting Rods kit with ARP 625+ Fasteners - Honda - B16A","public_title":null,"options":["Default Title"],"price":106200,"weight":6495,"compare_at_price":118000,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/bRIAN_cROWER_CONROD_76ceb2ff-25d4-4b15-a0bc-39084de4815f.jpg?v=1710153684"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/bRIAN_cROWER_CONROD_76ceb2ff-25d4-4b15-a0bc-39084de4815f.jpg?v=1710153684","options":["Title"],"media":[{"alt":"Brian Crower - Forged Connecting Rods kit with ARP 625+ Fasteners - Honda - B16A - BC6028 - BC6028","id":22936417927350,"position":1,"preview_image":{"aspect_ratio":2.66,"height":188,"width":500,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/bRIAN_cROWER_CONROD_76ceb2ff-25d4-4b15-a0bc-39084de4815f.jpg?v=1710153684"},"aspect_ratio":2.66,"height":188,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/bRIAN_cROWER_CONROD_76ceb2ff-25d4-4b15-a0bc-39084de4815f.jpg?v=1710153684","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Brian Crower\u003cbr\u003eReference Number: BC6028\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eMade from premium, 4340 steel billet material, Brian Crower connecting rods are available in two distinct styles depending on horsepower, budget and engine application, but both include the exclusive Brian Crower oiling groove in the pin bushing for added oiling. The bROD Series is intended for moderate boost applications and all motor race applications where peak horsepower is not going to exceed 700 at the flywheel. Utilizes venerable ARP2000 fasteners. The BC625+ Series rods are designed for high horsepower, high boost and extreme rpm applications where nothing but the best rod will do. Features include ARP's premium Custom Age 625+ bolt rated to 280,000 p.s.i. for ultimate fastening capabilities as well as aluminum-bronze bushings to insure long, reliable service, no matter what the boost, nitrous or RPM.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eB16A1 | 1600cc | DOHC | 16v | NA | I4,B16A2 | 1600cc | DOHC | 16v | NA | I4,B16A3 | 1600cc | DOHC | 16v | NA | I4,B16A4 | 1600cc | DOHC | 16v | NA | I4,B16A5 | 1600cc | DOHC | 16v | NA | I4,B16A6 | 1600cc | DOHC | 16v | NA | I4\u003c!--split--\u003e"}

{"id":7199397314742,"title":"Carrillo Honda\/Acura K24A Pro-A 3\/8 WMC Bolt Connecting Rods (Special Order No Cancel)","handle":"carrillo-honda-acura-k24a-pro-a-3-8-wmc-bolt-connecting-rods-special-order-no-cancel-scr4251-4","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR4251-4\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eK24A1 | 2400cc | DOHC | 16v | NA | I4,K24A2 | 2400cc | DOHC | 16v | NA | I4,K24A3 | 2400cc | DOHC | 16v | NA | I4,K24A4 | 2400cc | DOHC | 16v | NA | I4,K24A8 | 2400cc | DOHC | 16v | NA | I4,K24Y1 | 2400cc | DOHC | 16v | NA | I4,K24Y2 | 2400cc | DOHC | 16v | NA | I4,K24Z1 | 2400cc | DOHC | 16v | NA | I4,K24Z2 | 2400cc | DOHC | 16v | NA | I4,K24Z3 | 2400cc | DOHC | 16v | NA | I4,K24Z4 | 2400cc | DOHC | 16v | NA | I4,K24Z5 | 2400cc | DOHC | 16v | NA | I4,K24Z6 | 2400cc | DOHC | 16v | NA | I4,K24Z7 | 2400cc | DOHC | 16v | NA | I4\u003c!--split--\u003e","published_at":"2021-12-14T18:33:07+08:00","created_at":"2021-12-14T18:19:38+08:00","vendor":"Carrillo","type":"Build Your Block","tags":["build-your-block","carrillo","conrods-kit","honda","k24a1-2400cc-dohc-16v-na-i4","k24a2-2400cc-dohc-16v-na-i4","k24a3-2400cc-dohc-16v-na-i4","k24a4-2400cc-dohc-16v-na-i4","k24a8-2400cc-dohc-16v-na-i4","k24y1-2400cc-dohc-16v-na-i4","k24y2-2400cc-dohc-16v-na-i4","k24z1-2400cc-dohc-16v-na-i4","k24z2-2400cc-dohc-16v-na-i4","k24z3-2400cc-dohc-16v-na-i4","k24z4-2400cc-dohc-16v-na-i4","k24z5-2400cc-dohc-16v-na-i4","k24z6-2400cc-dohc-16v-na-i4","k24z7-2400cc-dohc-16v-na-i4","us1","ws15"],"price":148105,"price_min":148105,"price_max":148105,"available":true,"price_varies":false,"compare_at_price":155900,"compare_at_price_min":155900,"compare_at_price_max":155900,"compare_at_price_varies":false,"variants":[{"id":40995207512246,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SCR4251-4","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Carrillo Honda\/Acura K24A Pro-A 3\/8 WMC Bolt Connecting Rods (Special Order No Cancel)","public_title":null,"options":["Default Title"],"price":148105,"weight":6404,"compare_at_price":155900,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-hondaacura-k24a-pro-a-38-wmc-bolt-connecting-rods-special-order-no-cancel-rzcrew.jpg?v=1710321758"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-hondaacura-k24a-pro-a-38-wmc-bolt-connecting-rods-special-order-no-cancel-rzcrew.jpg?v=1710321758","options":["Title"],"media":[{"alt":"Carrillo Honda\/Acura K24A Pro-A 3\/8 WMC Bolt Connecting Rods (Special Order No Cancel) - SCR4251-4","id":23157958770870,"position":1,"preview_image":{"aspect_ratio":1.446,"height":747,"width":1080,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-hondaacura-k24a-pro-a-38-wmc-bolt-connecting-rods-special-order-no-cancel-rzcrew.jpg?v=1710321758"},"aspect_ratio":1.446,"height":747,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-hondaacura-k24a-pro-a-38-wmc-bolt-connecting-rods-special-order-no-cancel-rzcrew.jpg?v=1710321758","width":1080}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR4251-4\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eK24A1 | 2400cc | DOHC | 16v | NA | I4,K24A2 | 2400cc | DOHC | 16v | NA | I4,K24A3 | 2400cc | DOHC | 16v | NA | I4,K24A4 | 2400cc | DOHC | 16v | NA | I4,K24A8 | 2400cc | DOHC | 16v | NA | I4,K24Y1 | 2400cc | DOHC | 16v | NA | I4,K24Y2 | 2400cc | DOHC | 16v | NA | I4,K24Z1 | 2400cc | DOHC | 16v | NA | I4,K24Z2 | 2400cc | DOHC | 16v | NA | I4,K24Z3 | 2400cc | DOHC | 16v | NA | I4,K24Z4 | 2400cc | DOHC | 16v | NA | I4,K24Z5 | 2400cc | DOHC | 16v | NA | I4,K24Z6 | 2400cc | DOHC | 16v | NA | I4,K24Z7 | 2400cc | DOHC | 16v | NA | I4\u003c!--split--\u003e"}

{"id":456841166875,"title":"Brian Crower - Honda\/Acura K20A2, Z3 - Sportsman w\/ARP2000 Fasteners Forged Conrods Kit","handle":"brian-crower-honda-acura-k20a2-z3-sportsman-w-arp2000-fasteners-forged-conrods-kit-bc6041-bc6041","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Brian Crower\u003cbr\u003eReference Number: BC6041\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eMade from premium, 4340 steel billet material, Brian Crower connecting rods are available in two distinct styles depending on horsepower, budget and engine application, but both include the exclusive Brian Crower oiling groove in the pin bushing for added oiling. The bROD Series is intended for moderate boost applications and all motor race applications where peak horsepower is not going to exceed 700 at the flywheel. Utilizes venerable ARP2000 fasteners. The BC625+ Series rods are designed for high horsepower, high boost and extreme rpm applications where nothing but the best rod will do. Features include ARP's premium Custom Age 625+ bolt rated to 280,000 p.s.i. for ultimate fastening capabilities as well as aluminum-bronze bushings to insure long, reliable service, no matter what the boost, nitrous or RPM.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eK20A | 2000cc | DOHC | 16v | NA | I4,K20A2 | 2000cc | DOHC | 16v | NA | I4,K20A3 | 2000cc | DOHC | 16v | NA | I4,K20Z1 | 2000cc | DOHC | 16v | NA | I4,K20Z2 | 2000cc | DOHC | 16v | NA | I4,K20Z3 | 2000cc | DOHC | 16v | NA | I4,K20Z4 | 2000cc | DOHC | 16v | NA | I4\u003c!--split--\u003e","published_at":"2017-12-18T20:20:50+08:00","created_at":"2017-12-18T20:20:50+08:00","vendor":"Brian Crower","type":"Build Your Block","tags":["brian-crower","build-your-block","civic-fd2-2007-2010-na-k20z2-i4","conrods-kit","honda","k20a-2000cc-dohc-16v-na-i4","k20a2-2000cc-dohc-16v-na-i4","k20a3-2000cc-dohc-16v-na-i4","k20z1-2000cc-dohc-16v-na-i4","k20z2-2000cc-dohc-16v-na-i4","k20z3-2000cc-dohc-16v-na-i4","k20z4-2000cc-dohc-16v-na-i4","us1","ws110"],"price":71190,"price_min":71190,"price_max":71190,"available":true,"price_varies":false,"compare_at_price":79100,"compare_at_price_min":79100,"compare_at_price_max":79100,"compare_at_price_varies":false,"variants":[{"id":5337140723739,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BC6041","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Brian Crower - Honda\/Acura K20A2, Z3 - Sportsman w\/ARP2000 Fasteners Forged Conrods Kit","public_title":null,"options":["Default Title"],"price":71190,"weight":7175,"compare_at_price":79100,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/bRIAN_cROWER_CONROD_bc0616aa-e696-4c66-bd6f-64fdd6da5dad.jpg?v=1710153688"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/bRIAN_cROWER_CONROD_bc0616aa-e696-4c66-bd6f-64fdd6da5dad.jpg?v=1710153688","options":["Title"],"media":[{"alt":"Brian Crower - Honda\/Acura K20A2, Z3 - Sportsman w\/ARP2000 Fasteners Forged Conrods Kit - BC6041 - BC6041","id":22936420090038,"position":1,"preview_image":{"aspect_ratio":2.66,"height":188,"width":500,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/bRIAN_cROWER_CONROD_bc0616aa-e696-4c66-bd6f-64fdd6da5dad.jpg?v=1710153688"},"aspect_ratio":2.66,"height":188,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/bRIAN_cROWER_CONROD_bc0616aa-e696-4c66-bd6f-64fdd6da5dad.jpg?v=1710153688","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Brian Crower\u003cbr\u003eReference Number: BC6041\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eMade from premium, 4340 steel billet material, Brian Crower connecting rods are available in two distinct styles depending on horsepower, budget and engine application, but both include the exclusive Brian Crower oiling groove in the pin bushing for added oiling. The bROD Series is intended for moderate boost applications and all motor race applications where peak horsepower is not going to exceed 700 at the flywheel. Utilizes venerable ARP2000 fasteners. The BC625+ Series rods are designed for high horsepower, high boost and extreme rpm applications where nothing but the best rod will do. Features include ARP's premium Custom Age 625+ bolt rated to 280,000 p.s.i. for ultimate fastening capabilities as well as aluminum-bronze bushings to insure long, reliable service, no matter what the boost, nitrous or RPM.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eK20A | 2000cc | DOHC | 16v | NA | I4,K20A2 | 2000cc | DOHC | 16v | NA | I4,K20A3 | 2000cc | DOHC | 16v | NA | I4,K20Z1 | 2000cc | DOHC | 16v | NA | I4,K20Z2 | 2000cc | DOHC | 16v | NA | I4,K20Z3 | 2000cc | DOHC | 16v | NA | I4,K20Z4 | 2000cc | DOHC | 16v | NA | I4\u003c!--split--\u003e"}

{"id":7364686807222,"title":"Skunk2 Alpha Series Honda D16\/Z6 Connecting Rods (Long Rods)","handle":"skunk2-alpha-series-honda-d16-z6-connecting-rods-long-rods-306-05-1190","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Skunk 2\u003cbr\u003eReference Number: 306-05-1190\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAlpha Series Rods are forged from select 4340 chromoly steel and feature a straight H-beam design, resulting in the ultimate strength-to-weight ratio. 4340 chromoly is one of the strongest materials available, however, not all 4340 chromoly is the same. As such, Skunk2 relies on extensive material testing and works closely with its foundry to produce high-quality rods at an affordable price. Comprehensive heat-treating, tempering, and shot-peening processes together ensure that each Alpha Series Rod remains consistent and strong. Finally, each rod is magna-fluxed to ensure integrity and that each process has been completed thoroughly and according to Skunk2’s rigid specifications.\n\n \n\nSkunk2’s engineers spent nearly three years developing and testing its straight H-beam rod design. The results are one of the strongest beam configurations available, capable of handling more than 900 hp. Engineers made use of FEA (Finite Element Analysis) to determine high-stress points and implemented features to reduce wear and increase strength. Skunk2’s straight design distributes stress across a larger area when compared to tapered rods, providing additional support where necessary.\n\n \n\nAlpha Series Rods are manufactured from two-piece forgings, resulting in optimal grain orientation along the rod cap for increased strength. By orienting the metal’s grain in the direction of stress along the rod cap, perpendicular to the stress exerted along the beam, strength is significantly increased. Skunk2’s two-piece forgings provide a precision-tight fit between the rod’s cap and its beam without resorting to the brittle materials required by other processes.\n\n \n\nAlpha Series Rods also feature dual oil passages at their pin ends, providing additional lubrication and cooling, which leads to an even stronger, more durable rod. Unlike other designs, Skunk2’s carefully positioned, offset oil passages help deliver lubrication around the entire wrist pin, during each phase of the engine cycle.\n\n \n\nConnecting rod bolts endure more stress than any other engine fastener. Each Alpha Series Rod features high-quality, Skunk2-branded, 3\/8-inch ARP2000 bolts. ARP2000 rod bolts are forged, heat-treated, precision-machined, and capable of clamping loads as high as 220,000 psi. Precision-machined, bronze wrist pin bushings are also fitted to each Alpha Series Rod for increased wear resistance, and are compatible with most aftermarket pistons without additional machining.\n\n \n\nNot all forged H-beam rods are the same. Only Skunk2’s Alpha Series Rods feature our unique design, precision machining, and are capable of handling more than 900 hp, all at an economical price.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eD16Z6 | 1600cc | SOHC | 16v | NA | I4,D16Y8 | 1600cc | SOHC | 16v | NA | I4\u003c!--split--\u003e","published_at":"2022-06-10T12:01:06+08:00","created_at":"2022-06-10T11:55:51+08:00","vendor":"Skunk 2","type":"Build Your Block","tags":["build-your-block","conrods-kit","d16y8-1600cc-sohc-16v-na-i4","d16z6-1600cc-sohc-16v-na-i4","honda","skunk-2","us1","ws17"],"price":53289,"price_min":53289,"price_max":53289,"available":true,"price_varies":false,"compare_at_price":57300,"compare_at_price_min":57300,"compare_at_price_max":57300,"compare_at_price_varies":false,"variants":[{"id":41537301315766,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"306-05-1190","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skunk2 Alpha Series Honda D16\/Z6 Connecting Rods (Long Rods)","public_title":null,"options":["Default Title"],"price":53289,"weight":6177,"compare_at_price":57300,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-alpha-series-honda-d16z6-connecting-rods-long-rods-rzcrew.jpg?v=1710320622"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-alpha-series-honda-d16z6-connecting-rods-long-rods-rzcrew.jpg?v=1710320622","options":["Title"],"media":[{"alt":"Skunk2 Alpha Series Honda D16\/Z6 Connecting Rods (Long Rods) - 306-05-1190","id":24388930699446,"position":1,"preview_image":{"aspect_ratio":1.332,"height":488,"width":650,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-alpha-series-honda-d16z6-connecting-rods-long-rods-rzcrew.jpg?v=1710320622"},"aspect_ratio":1.332,"height":488,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-alpha-series-honda-d16z6-connecting-rods-long-rods-rzcrew.jpg?v=1710320622","width":650}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Skunk 2\u003cbr\u003eReference Number: 306-05-1190\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAlpha Series Rods are forged from select 4340 chromoly steel and feature a straight H-beam design, resulting in the ultimate strength-to-weight ratio. 4340 chromoly is one of the strongest materials available, however, not all 4340 chromoly is the same. As such, Skunk2 relies on extensive material testing and works closely with its foundry to produce high-quality rods at an affordable price. Comprehensive heat-treating, tempering, and shot-peening processes together ensure that each Alpha Series Rod remains consistent and strong. Finally, each rod is magna-fluxed to ensure integrity and that each process has been completed thoroughly and according to Skunk2’s rigid specifications.\n\n \n\nSkunk2’s engineers spent nearly three years developing and testing its straight H-beam rod design. The results are one of the strongest beam configurations available, capable of handling more than 900 hp. Engineers made use of FEA (Finite Element Analysis) to determine high-stress points and implemented features to reduce wear and increase strength. Skunk2’s straight design distributes stress across a larger area when compared to tapered rods, providing additional support where necessary.\n\n \n\nAlpha Series Rods are manufactured from two-piece forgings, resulting in optimal grain orientation along the rod cap for increased strength. By orienting the metal’s grain in the direction of stress along the rod cap, perpendicular to the stress exerted along the beam, strength is significantly increased. Skunk2’s two-piece forgings provide a precision-tight fit between the rod’s cap and its beam without resorting to the brittle materials required by other processes.\n\n \n\nAlpha Series Rods also feature dual oil passages at their pin ends, providing additional lubrication and cooling, which leads to an even stronger, more durable rod. Unlike other designs, Skunk2’s carefully positioned, offset oil passages help deliver lubrication around the entire wrist pin, during each phase of the engine cycle.\n\n \n\nConnecting rod bolts endure more stress than any other engine fastener. Each Alpha Series Rod features high-quality, Skunk2-branded, 3\/8-inch ARP2000 bolts. ARP2000 rod bolts are forged, heat-treated, precision-machined, and capable of clamping loads as high as 220,000 psi. Precision-machined, bronze wrist pin bushings are also fitted to each Alpha Series Rod for increased wear resistance, and are compatible with most aftermarket pistons without additional machining.\n\n \n\nNot all forged H-beam rods are the same. Only Skunk2’s Alpha Series Rods feature our unique design, precision machining, and are capable of handling more than 900 hp, all at an economical price.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eD16Z6 | 1600cc | SOHC | 16v | NA | I4,D16Y8 | 1600cc | SOHC | 16v | NA | I4\u003c!--split--\u003e"}

{"id":7364686741686,"title":"Skunk2 Alpha Series Honda F20C Connecting Rods","handle":"skunk2-alpha-series-honda-f20c-connecting-rods-306-05-1180","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Skunk 2\u003cbr\u003eReference Number: 306-05-1180\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAlpha Series Rods are forged from select 4340 chromoly steel and feature a straight H-beam design, resulting in the ultimate strength-to-weight ratio. 4340 chromoly is one of the strongest materials available, however, not all 4340 chromoly is the same. As such, Skunk2 relies on extensive material testing and works closely with its foundry to produce high-quality rods at an affordable price. Comprehensive heat-treating, tempering, and shot-peening processes together ensure that each Alpha Series Rod remains consistent and strong. Finally, each rod is magna-fluxed to ensure integrity and that each process has been completed thoroughly and according to Skunk2’s rigid specifications.\n\n \n\nSkunk2’s engineers spent nearly three years developing and testing its straight H-beam rod design. The results are one of the strongest beam configurations available, capable of handling more than 900 hp. Engineers made use of FEA (Finite Element Analysis) to determine high-stress points and implemented features to reduce wear and increase strength. Skunk2’s straight design distributes stress across a larger area when compared to tapered rods, providing additional support where necessary.\n\n \n\nAlpha Series Rods are manufactured from two-piece forgings, resulting in optimal grain orientation along the rod cap for increased strength. By orienting the metal’s grain in the direction of stress along the rod cap, perpendicular to the stress exerted along the beam, strength is significantly increased. Skunk2’s two-piece forgings provide a precision-tight fit between the rod’s cap and its beam without resorting to the brittle materials required by other processes.\n\n \n\nAlpha Series Rods also feature dual oil passages at their pin ends, providing additional lubrication and cooling, which leads to an even stronger, more durable rod. Unlike other designs, Skunk2’s carefully positioned, offset oil passages help deliver lubrication around the entire wrist pin, during each phase of the engine cycle.\n\n \n\nConnecting rod bolts endure more stress than any other engine fastener. Each Alpha Series Rod features high-quality, Skunk2-branded, 3\/8-inch ARP2000 bolts. ARP2000 rod bolts are forged, heat-treated, precision-machined, and capable of clamping loads as high as 220,000 psi. Precision-machined, bronze wrist pin bushings are also fitted to each Alpha Series Rod for increased wear resistance, and are compatible with most aftermarket pistons without additional machining.\n\n \n\nNot all forged H-beam rods are the same. Only Skunk2’s Alpha Series Rods feature our unique design, precision machining, and are capable of handling more than 900 hp, all at an economical price.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eF20C | 2000cc | DOHC | 16v | NA | I4\u003c!--split--\u003e","published_at":"2022-06-10T12:00:50+08:00","created_at":"2022-06-10T11:55:50+08:00","vendor":"Skunk 2","type":"Build Your Block","tags":["build-your-block","conrods-kit","f20c-2000cc-dohc-16v-na-i4","honda","skunk-2","us1","ws17"],"price":53289,"price_min":53289,"price_max":53289,"available":true,"price_varies":false,"compare_at_price":57300,"compare_at_price_min":57300,"compare_at_price_max":57300,"compare_at_price_varies":false,"variants":[{"id":41537301250230,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"306-05-1180","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skunk2 Alpha Series Honda F20C Connecting Rods","public_title":null,"options":["Default Title"],"price":53289,"weight":6495,"compare_at_price":57300,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-alpha-series-honda-f20c-connecting-rods-rzcrew.jpg?v=1710320621"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-alpha-series-honda-f20c-connecting-rods-rzcrew.jpg?v=1710320621","options":["Title"],"media":[{"alt":"Skunk2 Alpha Series Honda F20C Connecting Rods - 306-05-1180","id":24388930371766,"position":1,"preview_image":{"aspect_ratio":1.332,"height":488,"width":650,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-alpha-series-honda-f20c-connecting-rods-rzcrew.jpg?v=1710320621"},"aspect_ratio":1.332,"height":488,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-alpha-series-honda-f20c-connecting-rods-rzcrew.jpg?v=1710320621","width":650}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Skunk 2\u003cbr\u003eReference Number: 306-05-1180\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAlpha Series Rods are forged from select 4340 chromoly steel and feature a straight H-beam design, resulting in the ultimate strength-to-weight ratio. 4340 chromoly is one of the strongest materials available, however, not all 4340 chromoly is the same. As such, Skunk2 relies on extensive material testing and works closely with its foundry to produce high-quality rods at an affordable price. Comprehensive heat-treating, tempering, and shot-peening processes together ensure that each Alpha Series Rod remains consistent and strong. Finally, each rod is magna-fluxed to ensure integrity and that each process has been completed thoroughly and according to Skunk2’s rigid specifications.\n\n \n\nSkunk2’s engineers spent nearly three years developing and testing its straight H-beam rod design. The results are one of the strongest beam configurations available, capable of handling more than 900 hp. Engineers made use of FEA (Finite Element Analysis) to determine high-stress points and implemented features to reduce wear and increase strength. Skunk2’s straight design distributes stress across a larger area when compared to tapered rods, providing additional support where necessary.\n\n \n\nAlpha Series Rods are manufactured from two-piece forgings, resulting in optimal grain orientation along the rod cap for increased strength. By orienting the metal’s grain in the direction of stress along the rod cap, perpendicular to the stress exerted along the beam, strength is significantly increased. Skunk2’s two-piece forgings provide a precision-tight fit between the rod’s cap and its beam without resorting to the brittle materials required by other processes.\n\n \n\nAlpha Series Rods also feature dual oil passages at their pin ends, providing additional lubrication and cooling, which leads to an even stronger, more durable rod. Unlike other designs, Skunk2’s carefully positioned, offset oil passages help deliver lubrication around the entire wrist pin, during each phase of the engine cycle.\n\n \n\nConnecting rod bolts endure more stress than any other engine fastener. Each Alpha Series Rod features high-quality, Skunk2-branded, 3\/8-inch ARP2000 bolts. ARP2000 rod bolts are forged, heat-treated, precision-machined, and capable of clamping loads as high as 220,000 psi. Precision-machined, bronze wrist pin bushings are also fitted to each Alpha Series Rod for increased wear resistance, and are compatible with most aftermarket pistons without additional machining.\n\n \n\nNot all forged H-beam rods are the same. Only Skunk2’s Alpha Series Rods feature our unique design, precision machining, and are capable of handling more than 900 hp, all at an economical price.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eF20C | 2000cc | DOHC | 16v | NA | I4\u003c!--split--\u003e"}

{"id":7364686708918,"title":"Skunk2 Alpha Series Honda H22A Connecting Rods","handle":"skunk2-alpha-series-honda-h22a-connecting-rods-306-05-1170","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Skunk 2\u003cbr\u003eReference Number: 306-05-1170\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAlpha Series Rods are forged from select 4340 chromoly steel and feature a straight H-beam design, resulting in the ultimate strength-to-weight ratio. 4340 chromoly is one of the strongest materials available, however, not all 4340 chromoly is the same. As such, Skunk2 relies on extensive material testing and works closely with its foundry to produce high-quality rods at an affordable price. Comprehensive heat-treating, tempering, and shot-peening processes together ensure that each Alpha Series Rod remains consistent and strong. Finally, each rod is magna-fluxed to ensure integrity and that each process has been completed thoroughly and according to Skunk2’s rigid specifications.\n\n \n\nSkunk2’s engineers spent nearly three years developing and testing its straight H-beam rod design. The results are one of the strongest beam configurations available, capable of handling more than 900 hp. Engineers made use of FEA (Finite Element Analysis) to determine high-stress points and implemented features to reduce wear and increase strength. Skunk2’s straight design distributes stress across a larger area when compared to tapered rods, providing additional support where necessary.\n\n \n\nAlpha Series Rods are manufactured from two-piece forgings, resulting in optimal grain orientation along the rod cap for increased strength. By orienting the metal’s grain in the direction of stress along the rod cap, perpendicular to the stress exerted along the beam, strength is significantly increased. Skunk2’s two-piece forgings provide a precision-tight fit between the rod’s cap and its beam without resorting to the brittle materials required by other processes.\n\n \n\nAlpha Series Rods also feature dual oil passages at their pin ends, providing additional lubrication and cooling, which leads to an even stronger, more durable rod. Unlike other designs, Skunk2’s carefully positioned, offset oil passages help deliver lubrication around the entire wrist pin, during each phase of the engine cycle.\n\n \n\nConnecting rod bolts endure more stress than any other engine fastener. Each Alpha Series Rod features high-quality, Skunk2-branded, 3\/8-inch ARP2000 bolts. ARP2000 rod bolts are forged, heat-treated, precision-machined, and capable of clamping loads as high as 220,000 psi. Precision-machined, bronze wrist pin bushings are also fitted to each Alpha Series Rod for increased wear resistance, and are compatible with most aftermarket pistons without additional machining.\n\n \n\nNot all forged H-beam rods are the same. Only Skunk2’s Alpha Series Rods feature our unique design, precision machining, and are capable of handling more than 900 hp, all at an economical price.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eH22A | 2200cc | DOHC | 16v | NA | I4\u003c!--split--\u003e","published_at":"2022-06-10T12:00:43+08:00","created_at":"2022-06-10T11:55:49+08:00","vendor":"Skunk 2","type":"Build Your Block","tags":["build-your-block","conrods-kit","h22a-2200cc-dohc-16v-na-i4","honda","skunk-2","us1","ws17"],"price":53289,"price_min":53289,"price_max":53289,"available":true,"price_varies":false,"compare_at_price":57300,"compare_at_price_min":57300,"compare_at_price_max":57300,"compare_at_price_varies":false,"variants":[{"id":41537301217462,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"306-05-1170","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skunk2 Alpha Series Honda H22A Connecting Rods","public_title":null,"options":["Default Title"],"price":53289,"weight":6449,"compare_at_price":57300,"inventory_quantity":16,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-alpha-series-honda-h22a-connecting-rods-rzcrew.jpg?v=1710320621"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-alpha-series-honda-h22a-connecting-rods-rzcrew.jpg?v=1710320621","options":["Title"],"media":[{"alt":"Skunk2 Alpha Series Honda H22A Connecting Rods - 306-05-1170","id":24388930306230,"position":1,"preview_image":{"aspect_ratio":1.332,"height":488,"width":650,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-alpha-series-honda-h22a-connecting-rods-rzcrew.jpg?v=1710320621"},"aspect_ratio":1.332,"height":488,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-alpha-series-honda-h22a-connecting-rods-rzcrew.jpg?v=1710320621","width":650}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Skunk 2\u003cbr\u003eReference Number: 306-05-1170\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAlpha Series Rods are forged from select 4340 chromoly steel and feature a straight H-beam design, resulting in the ultimate strength-to-weight ratio. 4340 chromoly is one of the strongest materials available, however, not all 4340 chromoly is the same. As such, Skunk2 relies on extensive material testing and works closely with its foundry to produce high-quality rods at an affordable price. Comprehensive heat-treating, tempering, and shot-peening processes together ensure that each Alpha Series Rod remains consistent and strong. Finally, each rod is magna-fluxed to ensure integrity and that each process has been completed thoroughly and according to Skunk2’s rigid specifications.\n\n \n\nSkunk2’s engineers spent nearly three years developing and testing its straight H-beam rod design. The results are one of the strongest beam configurations available, capable of handling more than 900 hp. Engineers made use of FEA (Finite Element Analysis) to determine high-stress points and implemented features to reduce wear and increase strength. Skunk2’s straight design distributes stress across a larger area when compared to tapered rods, providing additional support where necessary.\n\n \n\nAlpha Series Rods are manufactured from two-piece forgings, resulting in optimal grain orientation along the rod cap for increased strength. By orienting the metal’s grain in the direction of stress along the rod cap, perpendicular to the stress exerted along the beam, strength is significantly increased. Skunk2’s two-piece forgings provide a precision-tight fit between the rod’s cap and its beam without resorting to the brittle materials required by other processes.\n\n \n\nAlpha Series Rods also feature dual oil passages at their pin ends, providing additional lubrication and cooling, which leads to an even stronger, more durable rod. Unlike other designs, Skunk2’s carefully positioned, offset oil passages help deliver lubrication around the entire wrist pin, during each phase of the engine cycle.\n\n \n\nConnecting rod bolts endure more stress than any other engine fastener. Each Alpha Series Rod features high-quality, Skunk2-branded, 3\/8-inch ARP2000 bolts. ARP2000 rod bolts are forged, heat-treated, precision-machined, and capable of clamping loads as high as 220,000 psi. Precision-machined, bronze wrist pin bushings are also fitted to each Alpha Series Rod for increased wear resistance, and are compatible with most aftermarket pistons without additional machining.\n\n \n\nNot all forged H-beam rods are the same. Only Skunk2’s Alpha Series Rods feature our unique design, precision machining, and are capable of handling more than 900 hp, all at an economical price.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eH22A | 2200cc | DOHC | 16v | NA | I4\u003c!--split--\u003e"}

{"id":7364686676150,"title":"Skunk2 Alpha Series Honda B16A Connecting Rods","handle":"skunk2-alpha-series-honda-b16a-connecting-rods-306-05-1160","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Skunk 2\u003cbr\u003eReference Number: 306-05-1160\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAlpha Series Rods are forged from select 4340 chromoly steel and feature a straight H-beam design, resulting in the ultimate strength-to-weight ratio. 4340 chromoly is one of the strongest materials available, however, not all 4340 chromoly is the same. As such, Skunk2 relies on extensive material testing and works closely with its foundry to produce high-quality rods at an affordable price. Comprehensive heat-treating, tempering, and shot-peening processes together ensure that each Alpha Series Rod remains consistent and strong. Finally, each rod is magna-fluxed to ensure integrity and that each process has been completed thoroughly and according to Skunk2’s rigid specifications.\n\n \n\nSkunk2’s engineers spent nearly three years developing and testing its straight H-beam rod design. The results are one of the strongest beam configurations available, capable of handling more than 900 hp. Engineers made use of FEA (Finite Element Analysis) to determine high-stress points and implemented features to reduce wear and increase strength. Skunk2’s straight design distributes stress across a larger area when compared to tapered rods, providing additional support where necessary.\n\n \n\nAlpha Series Rods are manufactured from two-piece forgings, resulting in optimal grain orientation along the rod cap for increased strength. By orienting the metal’s grain in the direction of stress along the rod cap, perpendicular to the stress exerted along the beam, strength is significantly increased. Skunk2’s two-piece forgings provide a precision-tight fit between the rod’s cap and its beam without resorting to the brittle materials required by other processes.\n\n \n\nAlpha Series Rods also feature dual oil passages at their pin ends, providing additional lubrication and cooling, which leads to an even stronger, more durable rod. Unlike other designs, Skunk2’s carefully positioned, offset oil passages help deliver lubrication around the entire wrist pin, during each phase of the engine cycle.\n\n \n\nConnecting rod bolts endure more stress than any other engine fastener. Each Alpha Series Rod features high-quality, Skunk2-branded, 3\/8-inch ARP2000 bolts. ARP2000 rod bolts are forged, heat-treated, precision-machined, and capable of clamping loads as high as 220,000 psi. Precision-machined, bronze wrist pin bushings are also fitted to each Alpha Series Rod for increased wear resistance, and are compatible with most aftermarket pistons without additional machining.\n\n \n\nNot all forged H-beam rods are the same. Only Skunk2’s Alpha Series Rods feature our unique design, precision machining, and are capable of handling more than 900 hp, all at an economical price.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 1 left in stock!\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eB16A1 | 1600cc | DOHC | 16v | NA | I4,B16A2 | 1600cc | DOHC | 16v | NA | I4,B16A3 | 1600cc | DOHC | 16v | NA | I4,B16A4 | 1600cc | DOHC | 16v | NA | I4,B16A5 | 1600cc | DOHC | 16v | NA | I4,B16A6 | 1600cc | DOHC | 16v | NA | I4\u003c!--split--\u003e","published_at":"2022-06-10T12:00:26+08:00","created_at":"2022-06-10T11:55:47+08:00","vendor":"Skunk 2","type":"Build Your Block","tags":["b16a1-1600cc-dohc-16v-na-i4","b16a2-1600cc-dohc-16v-na-i4","b16a3-1600cc-dohc-16v-na-i4","b16a4-1600cc-dohc-16v-na-i4","b16a5-1600cc-dohc-16v-na-i4","b16a6-1600cc-dohc-16v-na-i4","build-your-block","conrods-kit","honda","skunk-2","us1","ws17"],"price":53289,"price_min":53289,"price_max":53289,"available":true,"price_varies":false,"compare_at_price":57300,"compare_at_price_min":57300,"compare_at_price_max":57300,"compare_at_price_varies":false,"variants":[{"id":41537301184694,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"306-05-1160","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skunk2 Alpha Series Honda B16A Connecting Rods","public_title":null,"options":["Default Title"],"price":53289,"weight":6359,"compare_at_price":57300,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-alpha-series-honda-b16a-connecting-rods-rzcrew.jpg?v=1710320621"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-alpha-series-honda-b16a-connecting-rods-rzcrew.jpg?v=1710320621","options":["Title"],"media":[{"alt":"Skunk2 Alpha Series Honda B16A Connecting Rods - 306-05-1160","id":24388930076854,"position":1,"preview_image":{"aspect_ratio":1.332,"height":488,"width":650,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-alpha-series-honda-b16a-connecting-rods-rzcrew.jpg?v=1710320621"},"aspect_ratio":1.332,"height":488,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-alpha-series-honda-b16a-connecting-rods-rzcrew.jpg?v=1710320621","width":650}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Skunk 2\u003cbr\u003eReference Number: 306-05-1160\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAlpha Series Rods are forged from select 4340 chromoly steel and feature a straight H-beam design, resulting in the ultimate strength-to-weight ratio. 4340 chromoly is one of the strongest materials available, however, not all 4340 chromoly is the same. As such, Skunk2 relies on extensive material testing and works closely with its foundry to produce high-quality rods at an affordable price. Comprehensive heat-treating, tempering, and shot-peening processes together ensure that each Alpha Series Rod remains consistent and strong. Finally, each rod is magna-fluxed to ensure integrity and that each process has been completed thoroughly and according to Skunk2’s rigid specifications.\n\n \n\nSkunk2’s engineers spent nearly three years developing and testing its straight H-beam rod design. The results are one of the strongest beam configurations available, capable of handling more than 900 hp. Engineers made use of FEA (Finite Element Analysis) to determine high-stress points and implemented features to reduce wear and increase strength. Skunk2’s straight design distributes stress across a larger area when compared to tapered rods, providing additional support where necessary.\n\n \n\nAlpha Series Rods are manufactured from two-piece forgings, resulting in optimal grain orientation along the rod cap for increased strength. By orienting the metal’s grain in the direction of stress along the rod cap, perpendicular to the stress exerted along the beam, strength is significantly increased. Skunk2’s two-piece forgings provide a precision-tight fit between the rod’s cap and its beam without resorting to the brittle materials required by other processes.\n\n \n\nAlpha Series Rods also feature dual oil passages at their pin ends, providing additional lubrication and cooling, which leads to an even stronger, more durable rod. Unlike other designs, Skunk2’s carefully positioned, offset oil passages help deliver lubrication around the entire wrist pin, during each phase of the engine cycle.\n\n \n\nConnecting rod bolts endure more stress than any other engine fastener. Each Alpha Series Rod features high-quality, Skunk2-branded, 3\/8-inch ARP2000 bolts. ARP2000 rod bolts are forged, heat-treated, precision-machined, and capable of clamping loads as high as 220,000 psi. Precision-machined, bronze wrist pin bushings are also fitted to each Alpha Series Rod for increased wear resistance, and are compatible with most aftermarket pistons without additional machining.\n\n \n\nNot all forged H-beam rods are the same. Only Skunk2’s Alpha Series Rods feature our unique design, precision machining, and are capable of handling more than 900 hp, all at an economical price.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 1 left in stock!\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eB16A1 | 1600cc | DOHC | 16v | NA | I4,B16A2 | 1600cc | DOHC | 16v | NA | I4,B16A3 | 1600cc | DOHC | 16v | NA | I4,B16A4 | 1600cc | DOHC | 16v | NA | I4,B16A5 | 1600cc | DOHC | 16v | NA | I4,B16A6 | 1600cc | DOHC | 16v | NA | I4\u003c!--split--\u003e"}

{"id":7364686643382,"title":"Skunk2 Alpha Series Honda K24A\/Z Connecting Rods","handle":"skunk2-alpha-series-honda-k24a-z-connecting-rods-306-05-1150","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Skunk 2\u003cbr\u003eReference Number: 306-05-1150\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAlpha Series Rods are forged from select 4340 chromoly steel and feature a straight H-beam design, resulting in the ultimate strength-to-weight ratio. 4340 chromoly is one of the strongest materials available, however, not all 4340 chromoly is the same. As such, Skunk2 relies on extensive material testing and works closely with its foundry to produce high-quality rods at an affordable price. Comprehensive heat-treating, tempering, and shot-peening processes together ensure that each Alpha Series Rod remains consistent and strong. Finally, each rod is magna-fluxed to ensure integrity and that each process has been completed thoroughly and according to Skunk2’s rigid specifications.\n\n \n\nSkunk2’s engineers spent nearly three years developing and testing its straight H-beam rod design. The results are one of the strongest beam configurations available, capable of handling more than 900 hp. Engineers made use of FEA (Finite Element Analysis) to determine high-stress points and implemented features to reduce wear and increase strength. Skunk2’s straight design distributes stress across a larger area when compared to tapered rods, providing additional support where necessary.\n\n \n\nAlpha Series Rods are manufactured from two-piece forgings, resulting in optimal grain orientation along the rod cap for increased strength. By orienting the metal’s grain in the direction of stress along the rod cap, perpendicular to the stress exerted along the beam, strength is significantly increased. Skunk2’s two-piece forgings provide a precision-tight fit between the rod’s cap and its beam without resorting to the brittle materials required by other processes.\n\n \n\nAlpha Series Rods also feature dual oil passages at their pin ends, providing additional lubrication and cooling, which leads to an even stronger, more durable rod. Unlike other designs, Skunk2’s carefully positioned, offset oil passages help deliver lubrication around the entire wrist pin, during each phase of the engine cycle.\n\n \n\nConnecting rod bolts endure more stress than any other engine fastener. Each Alpha Series Rod features high-quality, Skunk2-branded, 3\/8-inch ARP2000 bolts. ARP2000 rod bolts are forged, heat-treated, precision-machined, and capable of clamping loads as high as 220,000 psi. Precision-machined, bronze wrist pin bushings are also fitted to each Alpha Series Rod for increased wear resistance, and are compatible with most aftermarket pistons without additional machining.\n\n \n\nNot all forged H-beam rods are the same. Only Skunk2’s Alpha Series Rods feature our unique design, precision machining, and are capable of handling more than 900 hp, all at an economical price.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 4 left in stock!\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eK24A1 | 2400cc | DOHC | 16v | NA | I4,K24A2 | 2400cc | DOHC | 16v | NA | I4,K24A3 | 2400cc | DOHC | 16v | NA | I4,K24A4 | 2400cc | DOHC | 16v | NA | I4,K24A8 | 2400cc | DOHC | 16v | NA | I4,K24Y1 | 2400cc | DOHC | 16v | NA | I4,K24Y2 | 2400cc | DOHC | 16v | NA | I4,K24Z1 | 2400cc | DOHC | 16v | NA | I4,K24Z2 | 2400cc | DOHC | 16v | NA | I4,K24Z3 | 2400cc | DOHC | 16v | NA | I4,K24Z4 | 2400cc | DOHC | 16v | NA | I4,K24Z5 | 2400cc | DOHC | 16v | NA | I4,K24Z6 | 2400cc | DOHC | 16v | NA | I4,K24Z7 | 2400cc | DOHC | 16v | NA | I4\u003c!--split--\u003e","published_at":"2022-06-10T12:00:21+08:00","created_at":"2022-06-10T11:55:46+08:00","vendor":"Skunk 2","type":"Build Your Block","tags":["build-your-block","conrods-kit","honda","k24a1-2400cc-dohc-16v-na-i4","k24a2-2400cc-dohc-16v-na-i4","k24a3-2400cc-dohc-16v-na-i4","k24a4-2400cc-dohc-16v-na-i4","k24a8-2400cc-dohc-16v-na-i4","k24y1-2400cc-dohc-16v-na-i4","k24y2-2400cc-dohc-16v-na-i4","k24z1-2400cc-dohc-16v-na-i4","k24z2-2400cc-dohc-16v-na-i4","k24z3-2400cc-dohc-16v-na-i4","k24z4-2400cc-dohc-16v-na-i4","k24z5-2400cc-dohc-16v-na-i4","k24z6-2400cc-dohc-16v-na-i4","k24z7-2400cc-dohc-16v-na-i4","skunk-2","us1","ws17"],"price":53289,"price_min":53289,"price_max":53289,"available":true,"price_varies":false,"compare_at_price":57300,"compare_at_price_min":57300,"compare_at_price_max":57300,"compare_at_price_varies":false,"variants":[{"id":41537301151926,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"306-05-1150","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skunk2 Alpha Series Honda K24A\/Z Connecting Rods","public_title":null,"options":["Default Title"],"price":53289,"weight":6359,"compare_at_price":57300,"inventory_quantity":17,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-alpha-series-honda-k24az-connecting-rods-rzcrew.jpg?v=1710320621"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-alpha-series-honda-k24az-connecting-rods-rzcrew.jpg?v=1710320621","options":["Title"],"media":[{"alt":"Skunk2 Alpha Series Honda K24A\/Z Connecting Rods - 306-05-1150","id":24388930011318,"position":1,"preview_image":{"aspect_ratio":1.332,"height":488,"width":650,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-alpha-series-honda-k24az-connecting-rods-rzcrew.jpg?v=1710320621"},"aspect_ratio":1.332,"height":488,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-alpha-series-honda-k24az-connecting-rods-rzcrew.jpg?v=1710320621","width":650}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Skunk 2\u003cbr\u003eReference Number: 306-05-1150\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAlpha Series Rods are forged from select 4340 chromoly steel and feature a straight H-beam design, resulting in the ultimate strength-to-weight ratio. 4340 chromoly is one of the strongest materials available, however, not all 4340 chromoly is the same. As such, Skunk2 relies on extensive material testing and works closely with its foundry to produce high-quality rods at an affordable price. Comprehensive heat-treating, tempering, and shot-peening processes together ensure that each Alpha Series Rod remains consistent and strong. Finally, each rod is magna-fluxed to ensure integrity and that each process has been completed thoroughly and according to Skunk2’s rigid specifications.\n\n \n\nSkunk2’s engineers spent nearly three years developing and testing its straight H-beam rod design. The results are one of the strongest beam configurations available, capable of handling more than 900 hp. Engineers made use of FEA (Finite Element Analysis) to determine high-stress points and implemented features to reduce wear and increase strength. Skunk2’s straight design distributes stress across a larger area when compared to tapered rods, providing additional support where necessary.\n\n \n\nAlpha Series Rods are manufactured from two-piece forgings, resulting in optimal grain orientation along the rod cap for increased strength. By orienting the metal’s grain in the direction of stress along the rod cap, perpendicular to the stress exerted along the beam, strength is significantly increased. Skunk2’s two-piece forgings provide a precision-tight fit between the rod’s cap and its beam without resorting to the brittle materials required by other processes.\n\n \n\nAlpha Series Rods also feature dual oil passages at their pin ends, providing additional lubrication and cooling, which leads to an even stronger, more durable rod. Unlike other designs, Skunk2’s carefully positioned, offset oil passages help deliver lubrication around the entire wrist pin, during each phase of the engine cycle.\n\n \n\nConnecting rod bolts endure more stress than any other engine fastener. Each Alpha Series Rod features high-quality, Skunk2-branded, 3\/8-inch ARP2000 bolts. ARP2000 rod bolts are forged, heat-treated, precision-machined, and capable of clamping loads as high as 220,000 psi. Precision-machined, bronze wrist pin bushings are also fitted to each Alpha Series Rod for increased wear resistance, and are compatible with most aftermarket pistons without additional machining.\n\n \n\nNot all forged H-beam rods are the same. Only Skunk2’s Alpha Series Rods feature our unique design, precision machining, and are capable of handling more than 900 hp, all at an economical price.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 4 left in stock!\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eK24A1 | 2400cc | DOHC | 16v | NA | I4,K24A2 | 2400cc | DOHC | 16v | NA | I4,K24A3 | 2400cc | DOHC | 16v | NA | I4,K24A4 | 2400cc | DOHC | 16v | NA | I4,K24A8 | 2400cc | DOHC | 16v | NA | I4,K24Y1 | 2400cc | DOHC | 16v | NA | I4,K24Y2 | 2400cc | DOHC | 16v | NA | I4,K24Z1 | 2400cc | DOHC | 16v | NA | I4,K24Z2 | 2400cc | DOHC | 16v | NA | I4,K24Z3 | 2400cc | DOHC | 16v | NA | I4,K24Z4 | 2400cc | DOHC | 16v | NA | I4,K24Z5 | 2400cc | DOHC | 16v | NA | I4,K24Z6 | 2400cc | DOHC | 16v | NA | I4,K24Z7 | 2400cc | DOHC | 16v | NA | I4\u003c!--split--\u003e"}

{"id":7364686545078,"title":"Skunk2 Alpha Series Honda B18A\/B Connecting Rods","handle":"skunk2-alpha-series-honda-b18a-b-connecting-rods-306-05-1130","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Skunk 2\u003cbr\u003eReference Number: 306-05-1130\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAlpha Series Rods are forged from select 4340 chromoly steel and feature a straight H-beam design, resulting in the ultimate strength-to-weight ratio. 4340 chromoly is one of the strongest materials available, however, not all 4340 chromoly is the same. As such, Skunk2 relies on extensive material testing and works closely with its foundry to produce high-quality rods at an affordable price. Comprehensive heat-treating, tempering, and shot-peening processes together ensure that each Alpha Series Rod remains consistent and strong. Finally, each rod is magna-fluxed to ensure integrity and that each process has been completed thoroughly and according to Skunk2’s rigid specifications.\n\n \n\nSkunk2’s engineers spent nearly three years developing and testing its straight H-beam rod design. The results are one of the strongest beam configurations available, capable of handling more than 900 hp. Engineers made use of FEA (Finite Element Analysis) to determine high-stress points and implemented features to reduce wear and increase strength. Skunk2’s straight design distributes stress across a larger area when compared to tapered rods, providing additional support where necessary.\n\n \n\nAlpha Series Rods are manufactured from two-piece forgings, resulting in optimal grain orientation along the rod cap for increased strength. By orienting the metal’s grain in the direction of stress along the rod cap, perpendicular to the stress exerted along the beam, strength is significantly increased. Skunk2’s two-piece forgings provide a precision-tight fit between the rod’s cap and its beam without resorting to the brittle materials required by other processes.\n\n \n\nAlpha Series Rods also feature dual oil passages at their pin ends, providing additional lubrication and cooling, which leads to an even stronger, more durable rod. Unlike other designs, Skunk2’s carefully positioned, offset oil passages help deliver lubrication around the entire wrist pin, during each phase of the engine cycle.\n\n \n\nConnecting rod bolts endure more stress than any other engine fastener. Each Alpha Series Rod features high-quality, Skunk2-branded, 3\/8-inch ARP2000 bolts. ARP2000 rod bolts are forged, heat-treated, precision-machined, and capable of clamping loads as high as 220,000 psi. Precision-machined, bronze wrist pin bushings are also fitted to each Alpha Series Rod for increased wear resistance, and are compatible with most aftermarket pistons without additional machining.\n\n \n\nNot all forged H-beam rods are the same. Only Skunk2’s Alpha Series Rods feature our unique design, precision machining, and are capable of handling more than 900 hp, all at an economical price.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eB18A1 | 1800cc | DOHC | 16v | NA | I4,B18B1 | 1800cc | DOHC | 16v | NA | I4\u003c!--split--\u003e","published_at":"2023-02-01T17:40:52+08:00","created_at":"2022-06-10T11:55:43+08:00","vendor":"Skunk 2","type":"Build Your Block","tags":["b18a1-1800cc-dohc-16v-na-i4","b18b1-1800cc-dohc-16v-na-i4","build-your-block","conrods-kit","honda","skunk-2","us1","ws17"],"price":53289,"price_min":53289,"price_max":53289,"available":true,"price_varies":false,"compare_at_price":57300,"compare_at_price_min":57300,"compare_at_price_max":57300,"compare_at_price_varies":false,"variants":[{"id":41537301053622,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"306-05-1130","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skunk2 Alpha Series Honda B18A\/B Connecting Rods","public_title":null,"options":["Default Title"],"price":53289,"weight":6359,"compare_at_price":57300,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-alpha-series-honda-b18ab-connecting-rods-rzcrew.jpg?v=1710320623"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-alpha-series-honda-b18ab-connecting-rods-rzcrew.jpg?v=1710320623","options":["Title"],"media":[{"alt":"Skunk2 Alpha Series Honda B18A\/B Connecting Rods - 306-05-1130","id":24388929585334,"position":1,"preview_image":{"aspect_ratio":1.332,"height":488,"width":650,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-alpha-series-honda-b18ab-connecting-rods-rzcrew.jpg?v=1710320623"},"aspect_ratio":1.332,"height":488,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-alpha-series-honda-b18ab-connecting-rods-rzcrew.jpg?v=1710320623","width":650}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Skunk 2\u003cbr\u003eReference Number: 306-05-1130\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAlpha Series Rods are forged from select 4340 chromoly steel and feature a straight H-beam design, resulting in the ultimate strength-to-weight ratio. 4340 chromoly is one of the strongest materials available, however, not all 4340 chromoly is the same. As such, Skunk2 relies on extensive material testing and works closely with its foundry to produce high-quality rods at an affordable price. Comprehensive heat-treating, tempering, and shot-peening processes together ensure that each Alpha Series Rod remains consistent and strong. Finally, each rod is magna-fluxed to ensure integrity and that each process has been completed thoroughly and according to Skunk2’s rigid specifications.\n\n \n\nSkunk2’s engineers spent nearly three years developing and testing its straight H-beam rod design. The results are one of the strongest beam configurations available, capable of handling more than 900 hp. Engineers made use of FEA (Finite Element Analysis) to determine high-stress points and implemented features to reduce wear and increase strength. Skunk2’s straight design distributes stress across a larger area when compared to tapered rods, providing additional support where necessary.\n\n \n\nAlpha Series Rods are manufactured from two-piece forgings, resulting in optimal grain orientation along the rod cap for increased strength. By orienting the metal’s grain in the direction of stress along the rod cap, perpendicular to the stress exerted along the beam, strength is significantly increased. Skunk2’s two-piece forgings provide a precision-tight fit between the rod’s cap and its beam without resorting to the brittle materials required by other processes.\n\n \n\nAlpha Series Rods also feature dual oil passages at their pin ends, providing additional lubrication and cooling, which leads to an even stronger, more durable rod. Unlike other designs, Skunk2’s carefully positioned, offset oil passages help deliver lubrication around the entire wrist pin, during each phase of the engine cycle.\n\n \n\nConnecting rod bolts endure more stress than any other engine fastener. Each Alpha Series Rod features high-quality, Skunk2-branded, 3\/8-inch ARP2000 bolts. ARP2000 rod bolts are forged, heat-treated, precision-machined, and capable of clamping loads as high as 220,000 psi. Precision-machined, bronze wrist pin bushings are also fitted to each Alpha Series Rod for increased wear resistance, and are compatible with most aftermarket pistons without additional machining.\n\n \n\nNot all forged H-beam rods are the same. Only Skunk2’s Alpha Series Rods feature our unique design, precision machining, and are capable of handling more than 900 hp, all at an economical price.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eB18A1 | 1800cc | DOHC | 16v | NA | I4,B18B1 | 1800cc | DOHC | 16v | NA | I4\u003c!--split--\u003e"}

{"id":7364686479542,"title":"Skunk2 Alpha Series Honda D16\/ZC Connecting Rods","handle":"skunk2-alpha-series-honda-d16-zc-connecting-rods-306-05-1110","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Skunk 2\u003cbr\u003eReference Number: 306-05-1110\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAlpha Series Rods are forged from select 4340 chromoly steel and feature a straight H-beam design, resulting in the ultimate strength-to-weight ratio. 4340 chromoly is one of the strongest materials available, however, not all 4340 chromoly is the same. As such, Skunk2 relies on extensive material testing and works closely with its foundry to produce high-quality rods at an affordable price. Comprehensive heat-treating, tempering, and shot-peening processes together ensure that each Alpha Series Rod remains consistent and strong. Finally, each rod is magna-fluxed to ensure integrity and that each process has been completed thoroughly and according to Skunk2’s rigid specifications.\n\n \n\nSkunk2’s engineers spent nearly three years developing and testing its straight H-beam rod design. The results are one of the strongest beam configurations available, capable of handling more than 900 hp. Engineers made use of FEA (Finite Element Analysis) to determine high-stress points and implemented features to reduce wear and increase strength. Skunk2’s straight design distributes stress across a larger area when compared to tapered rods, providing additional support where necessary.\n\n \n\nAlpha Series Rods are manufactured from two-piece forgings, resulting in optimal grain orientation along the rod cap for increased strength. By orienting the metal’s grain in the direction of stress along the rod cap, perpendicular to the stress exerted along the beam, strength is significantly increased. Skunk2’s two-piece forgings provide a precision-tight fit between the rod’s cap and its beam without resorting to the brittle materials required by other processes.\n\n \n\nAlpha Series Rods also feature dual oil passages at their pin ends, providing additional lubrication and cooling, which leads to an even stronger, more durable rod. Unlike other designs, Skunk2’s carefully positioned, offset oil passages help deliver lubrication around the entire wrist pin, during each phase of the engine cycle.\n\n \n\nConnecting rod bolts endure more stress than any other engine fastener. Each Alpha Series Rod features high-quality, Skunk2-branded, 3\/8-inch ARP2000 bolts. ARP2000 rod bolts are forged, heat-treated, precision-machined, and capable of clamping loads as high as 220,000 psi. Precision-machined, bronze wrist pin bushings are also fitted to each Alpha Series Rod for increased wear resistance, and are compatible with most aftermarket pistons without additional machining.\n\n \n\nNot all forged H-beam rods are the same. Only Skunk2’s Alpha Series Rods feature our unique design, precision machining, and are capable of handling more than 900 hp, all at an economical price.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eD16A8 | 1600cc | DOHC | 16v | NA | I4,D16A9 | 1600cc | DOHC | 16v | NA | I4,ZC DOHC | 1600cc | DOHC | 16v | NA | I4\u003c!--split--\u003e","published_at":"2022-06-10T11:59:31+08:00","created_at":"2022-06-10T11:55:40+08:00","vendor":"Skunk 2","type":"Build Your Block","tags":["build-your-block","conrods-kit","d16a8-1600cc-dohc-16v-na-i4","d16a9-1600cc-dohc-16v-na-i4","honda","skunk-2","us1","ws17","zc-dohc-1600cc-dohc-16v-na-i4"],"price":53289,"price_min":53289,"price_max":53289,"available":true,"price_varies":false,"compare_at_price":57300,"compare_at_price_min":57300,"compare_at_price_max":57300,"compare_at_price_varies":false,"variants":[{"id":41537300988086,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"306-05-1110","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skunk2 Alpha Series Honda D16\/ZC Connecting Rods","public_title":null,"options":["Default Title"],"price":53289,"weight":6223,"compare_at_price":57300,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-alpha-series-honda-d16zc-connecting-rods-rzcrew.jpg?v=1710320623"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-alpha-series-honda-d16zc-connecting-rods-rzcrew.jpg?v=1710320623","options":["Title"],"media":[{"alt":"Skunk2 Alpha Series Honda D16\/ZC Connecting Rods - 306-05-1110","id":24388929192118,"position":1,"preview_image":{"aspect_ratio":1.332,"height":488,"width":650,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-alpha-series-honda-d16zc-connecting-rods-rzcrew.jpg?v=1710320623"},"aspect_ratio":1.332,"height":488,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-alpha-series-honda-d16zc-connecting-rods-rzcrew.jpg?v=1710320623","width":650}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Skunk 2\u003cbr\u003eReference Number: 306-05-1110\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAlpha Series Rods are forged from select 4340 chromoly steel and feature a straight H-beam design, resulting in the ultimate strength-to-weight ratio. 4340 chromoly is one of the strongest materials available, however, not all 4340 chromoly is the same. As such, Skunk2 relies on extensive material testing and works closely with its foundry to produce high-quality rods at an affordable price. Comprehensive heat-treating, tempering, and shot-peening processes together ensure that each Alpha Series Rod remains consistent and strong. Finally, each rod is magna-fluxed to ensure integrity and that each process has been completed thoroughly and according to Skunk2’s rigid specifications.\n\n \n\nSkunk2’s engineers spent nearly three years developing and testing its straight H-beam rod design. The results are one of the strongest beam configurations available, capable of handling more than 900 hp. Engineers made use of FEA (Finite Element Analysis) to determine high-stress points and implemented features to reduce wear and increase strength. Skunk2’s straight design distributes stress across a larger area when compared to tapered rods, providing additional support where necessary.\n\n \n\nAlpha Series Rods are manufactured from two-piece forgings, resulting in optimal grain orientation along the rod cap for increased strength. By orienting the metal’s grain in the direction of stress along the rod cap, perpendicular to the stress exerted along the beam, strength is significantly increased. Skunk2’s two-piece forgings provide a precision-tight fit between the rod’s cap and its beam without resorting to the brittle materials required by other processes.\n\n \n\nAlpha Series Rods also feature dual oil passages at their pin ends, providing additional lubrication and cooling, which leads to an even stronger, more durable rod. Unlike other designs, Skunk2’s carefully positioned, offset oil passages help deliver lubrication around the entire wrist pin, during each phase of the engine cycle.\n\n \n\nConnecting rod bolts endure more stress than any other engine fastener. Each Alpha Series Rod features high-quality, Skunk2-branded, 3\/8-inch ARP2000 bolts. ARP2000 rod bolts are forged, heat-treated, precision-machined, and capable of clamping loads as high as 220,000 psi. Precision-machined, bronze wrist pin bushings are also fitted to each Alpha Series Rod for increased wear resistance, and are compatible with most aftermarket pistons without additional machining.\n\n \n\nNot all forged H-beam rods are the same. Only Skunk2’s Alpha Series Rods feature our unique design, precision machining, and are capable of handling more than 900 hp, all at an economical price.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eD16A8 | 1600cc | DOHC | 16v | NA | I4,D16A9 | 1600cc | DOHC | 16v | NA | I4,ZC DOHC | 1600cc | DOHC | 16v | NA | I4\u003c!--split--\u003e"}

{"id":7364686446774,"title":"Brian Crower Connecting Rods - Honda K24 - 5.985in - I-Beam Mid-Weight w\/ARP2000 Fasteners","handle":"brian-crower-connecting-rods-honda-k24-5-985in-i-beam-mid-weight-w-arp2000-fasteners-bc6055","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Brian Crower\u003cbr\u003eReference Number: BC6055\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eMade from premium, 4340 steel billet material, Brian Crower connecting rods are available in two distinct styles depending on horsepower, budget and engine application, but both include the exclusive Brian Crower oiling groove in the pin bushing for added oiling. The bROD Series is intended for moderate boost applications and all motor race applications where peak horsepower is not going to exceed 700 at the flywheel. Utilizes venerable ARP2000 fasteners. The BC625+ Series rods are designed for high horsepower, high boost and extreme rpm applications where nothing but the best rod will do. Features include ARP's premium Custom Age 625+ bolt rated to 280,000 p.s.i. for ultimate fastening capabilities as well as aluminum-bronze bushings to insure long, reliable service, no matter what the boost, nitrous or RPM.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eK24A1 | 2400cc | DOHC | 16v | NA | I4,K24A2 | 2400cc | DOHC | 16v | NA | I4,K24A3 | 2400cc | DOHC | 16v | NA | I4,K24A4 | 2400cc | DOHC | 16v | NA | I4,K24A8 | 2400cc | DOHC | 16v | NA | I4,K24Y1 | 2400cc | DOHC | 16v | NA | I4,K24Y2 | 2400cc | DOHC | 16v | NA | I4,K24Z1 | 2400cc | DOHC | 16v | NA | I4,K24Z2 | 2400cc | DOHC | 16v | NA | I4,K24Z3 | 2400cc | DOHC | 16v | NA | I4,K24Z4 | 2400cc | DOHC | 16v | NA | I4,K24Z5 | 2400cc | DOHC | 16v | NA | I4,K24Z6 | 2400cc | DOHC | 16v | NA | I4,K24Z7 | 2400cc | DOHC | 16v | NA | I4\u003c!--split--\u003e","published_at":"2022-06-10T11:59:17+08:00","created_at":"2022-06-10T11:55:39+08:00","vendor":"Brian Crower","type":"Build Your Block","tags":["brian-crower","build-your-block","conrods-kit","honda","k24a1-2400cc-dohc-16v-na-i4","k24a2-2400cc-dohc-16v-na-i4","k24a3-2400cc-dohc-16v-na-i4","k24a4-2400cc-dohc-16v-na-i4","k24a8-2400cc-dohc-16v-na-i4","k24y1-2400cc-dohc-16v-na-i4","k24y2-2400cc-dohc-16v-na-i4","k24z1-2400cc-dohc-16v-na-i4","k24z2-2400cc-dohc-16v-na-i4","k24z3-2400cc-dohc-16v-na-i4","k24z4-2400cc-dohc-16v-na-i4","k24z5-2400cc-dohc-16v-na-i4","k24z6-2400cc-dohc-16v-na-i4","k24z7-2400cc-dohc-16v-na-i4","us1","ws110"],"price":101700,"price_min":101700,"price_max":101700,"available":true,"price_varies":false,"compare_at_price":113000,"compare_at_price_min":113000,"compare_at_price_max":113000,"compare_at_price_varies":false,"variants":[{"id":41537300955318,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BC6055","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Brian Crower Connecting Rods - Honda K24 - 5.985in - I-Beam Mid-Weight w\/ARP2000 Fasteners","public_title":null,"options":["Default Title"],"price":101700,"weight":10804,"compare_at_price":113000,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/brian-crower-connecting-rods-honda-k24-5-985in-i-beam-mid-weight-warp2000-fasteners-rzcrew.jpg?v=1710320623"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/brian-crower-connecting-rods-honda-k24-5-985in-i-beam-mid-weight-warp2000-fasteners-rzcrew.jpg?v=1710320623","options":["Title"],"media":[{"alt":"Brian Crower Connecting Rods - Honda K24 - 5.985in - I-Beam Mid-Weight w\/ARP2000 Fasteners - BC6055","id":24388929061046,"position":1,"preview_image":{"aspect_ratio":2.66,"height":188,"width":500,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/brian-crower-connecting-rods-honda-k24-5-985in-i-beam-mid-weight-warp2000-fasteners-rzcrew.jpg?v=1710320623"},"aspect_ratio":2.66,"height":188,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/brian-crower-connecting-rods-honda-k24-5-985in-i-beam-mid-weight-warp2000-fasteners-rzcrew.jpg?v=1710320623","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Brian Crower\u003cbr\u003eReference Number: BC6055\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eMade from premium, 4340 steel billet material, Brian Crower connecting rods are available in two distinct styles depending on horsepower, budget and engine application, but both include the exclusive Brian Crower oiling groove in the pin bushing for added oiling. The bROD Series is intended for moderate boost applications and all motor race applications where peak horsepower is not going to exceed 700 at the flywheel. Utilizes venerable ARP2000 fasteners. The BC625+ Series rods are designed for high horsepower, high boost and extreme rpm applications where nothing but the best rod will do. Features include ARP's premium Custom Age 625+ bolt rated to 280,000 p.s.i. for ultimate fastening capabilities as well as aluminum-bronze bushings to insure long, reliable service, no matter what the boost, nitrous or RPM.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eK24A1 | 2400cc | DOHC | 16v | NA | I4,K24A2 | 2400cc | DOHC | 16v | NA | I4,K24A3 | 2400cc | DOHC | 16v | NA | I4,K24A4 | 2400cc | DOHC | 16v | NA | I4,K24A8 | 2400cc | DOHC | 16v | NA | I4,K24Y1 | 2400cc | DOHC | 16v | NA | I4,K24Y2 | 2400cc | DOHC | 16v | NA | I4,K24Z1 | 2400cc | DOHC | 16v | NA | I4,K24Z2 | 2400cc | DOHC | 16v | NA | I4,K24Z3 | 2400cc | DOHC | 16v | NA | I4,K24Z4 | 2400cc | DOHC | 16v | NA | I4,K24Z5 | 2400cc | DOHC | 16v | NA | I4,K24Z6 | 2400cc | DOHC | 16v | NA | I4,K24Z7 | 2400cc | DOHC | 16v | NA | I4\u003c!--split--\u003e"}

{"id":7364686512310,"title":"Skunk2 Alpha Series Honda B18C Connecting Rods","handle":"skunk2-alpha-series-honda-b18c-connecting-rods-306-05-1120","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Skunk 2\u003cbr\u003eReference Number: 306-05-1120\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAlpha Series Rods are forged from select 4340 chromoly steel and feature a straight H-beam design, resulting in the ultimate strength-to-weight ratio. 4340 chromoly is one of the strongest materials available, however, not all 4340 chromoly is the same. As such, Skunk2 relies on extensive material testing and works closely with its foundry to produce high-quality rods at an affordable price. Comprehensive heat-treating, tempering, and shot-peening processes together ensure that each Alpha Series Rod remains consistent and strong. Finally, each rod is magna-fluxed to ensure integrity and that each process has been completed thoroughly and according to Skunk2’s rigid specifications.\n\n \n\nSkunk2’s engineers spent nearly three years developing and testing its straight H-beam rod design. The results are one of the strongest beam configurations available, capable of handling more than 900 hp. Engineers made use of FEA (Finite Element Analysis) to determine high-stress points and implemented features to reduce wear and increase strength. Skunk2’s straight design distributes stress across a larger area when compared to tapered rods, providing additional support where necessary.\n\n \n\nAlpha Series Rods are manufactured from two-piece forgings, resulting in optimal grain orientation along the rod cap for increased strength. By orienting the metal’s grain in the direction of stress along the rod cap, perpendicular to the stress exerted along the beam, strength is significantly increased. Skunk2’s two-piece forgings provide a precision-tight fit between the rod’s cap and its beam without resorting to the brittle materials required by other processes.\n\n \n\nAlpha Series Rods also feature dual oil passages at their pin ends, providing additional lubrication and cooling, which leads to an even stronger, more durable rod. Unlike other designs, Skunk2’s carefully positioned, offset oil passages help deliver lubrication around the entire wrist pin, during each phase of the engine cycle.\n\n \n\nConnecting rod bolts endure more stress than any other engine fastener. Each Alpha Series Rod features high-quality, Skunk2-branded, 3\/8-inch ARP2000 bolts. ARP2000 rod bolts are forged, heat-treated, precision-machined, and capable of clamping loads as high as 220,000 psi. Precision-machined, bronze wrist pin bushings are also fitted to each Alpha Series Rod for increased wear resistance, and are compatible with most aftermarket pistons without additional machining.\n\n \n\nNot all forged H-beam rods are the same. Only Skunk2’s Alpha Series Rods feature our unique design, precision machining, and are capable of handling more than 900 hp, all at an economical price.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eB18C5 | 1800cc | DOHC | 16v | NA | I4,B18C6 | 1800cc | DOHC | 16v | NA | I4,B18C7 | 1800cc | DOHC | 16v | NA | I4,B18C1 | 1800cc | DOHC | 16v | NA | I4,B18C2 | 1800cc | DOHC | 16v | NA | I4,B18C3 | 1800cc | DOHC | 16v | NA | I4,B18C4 | 1800cc | DOHC | 16v | NA | I4\u003c!--split--\u003e","published_at":"2022-06-10T11:59:46+08:00","created_at":"2022-06-10T11:55:42+08:00","vendor":"Skunk 2","type":"Build Your Block","tags":["b18c1-1800cc-dohc-16v-na-i4","b18c2-1800cc-dohc-16v-na-i4","b18c3-1800cc-dohc-16v-na-i4","b18c4-1800cc-dohc-16v-na-i4","b18c5-1800cc-dohc-16v-na-i4","b18c6-1800cc-dohc-16v-na-i4","b18c7-1800cc-dohc-16v-na-i4","build-your-block","conrods-kit","honda","skunk-2","us1","ws17"],"price":53289,"price_min":53289,"price_max":53289,"available":true,"price_varies":false,"compare_at_price":57300,"compare_at_price_min":57300,"compare_at_price_max":57300,"compare_at_price_varies":false,"variants":[{"id":41537301020854,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"306-05-1120","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skunk2 Alpha Series Honda B18C Connecting Rods","public_title":null,"options":["Default Title"],"price":53289,"weight":6404,"compare_at_price":57300,"inventory_quantity":17,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-alpha-series-honda-b18c-connecting-rods-rzcrew.jpg?v=1710320623"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-alpha-series-honda-b18c-connecting-rods-rzcrew.jpg?v=1710320623","options":["Title"],"media":[{"alt":"Skunk2 Alpha Series Honda B18C Connecting Rods - 306-05-1120","id":24388929323190,"position":1,"preview_image":{"aspect_ratio":1.332,"height":488,"width":650,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-alpha-series-honda-b18c-connecting-rods-rzcrew.jpg?v=1710320623"},"aspect_ratio":1.332,"height":488,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/skunk2-alpha-series-honda-b18c-connecting-rods-rzcrew.jpg?v=1710320623","width":650}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Skunk 2\u003cbr\u003eReference Number: 306-05-1120\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAlpha Series Rods are forged from select 4340 chromoly steel and feature a straight H-beam design, resulting in the ultimate strength-to-weight ratio. 4340 chromoly is one of the strongest materials available, however, not all 4340 chromoly is the same. As such, Skunk2 relies on extensive material testing and works closely with its foundry to produce high-quality rods at an affordable price. Comprehensive heat-treating, tempering, and shot-peening processes together ensure that each Alpha Series Rod remains consistent and strong. Finally, each rod is magna-fluxed to ensure integrity and that each process has been completed thoroughly and according to Skunk2’s rigid specifications.\n\n \n\nSkunk2’s engineers spent nearly three years developing and testing its straight H-beam rod design. The results are one of the strongest beam configurations available, capable of handling more than 900 hp. Engineers made use of FEA (Finite Element Analysis) to determine high-stress points and implemented features to reduce wear and increase strength. Skunk2’s straight design distributes stress across a larger area when compared to tapered rods, providing additional support where necessary.\n\n \n\nAlpha Series Rods are manufactured from two-piece forgings, resulting in optimal grain orientation along the rod cap for increased strength. By orienting the metal’s grain in the direction of stress along the rod cap, perpendicular to the stress exerted along the beam, strength is significantly increased. Skunk2’s two-piece forgings provide a precision-tight fit between the rod’s cap and its beam without resorting to the brittle materials required by other processes.\n\n \n\nAlpha Series Rods also feature dual oil passages at their pin ends, providing additional lubrication and cooling, which leads to an even stronger, more durable rod. Unlike other designs, Skunk2’s carefully positioned, offset oil passages help deliver lubrication around the entire wrist pin, during each phase of the engine cycle.\n\n \n\nConnecting rod bolts endure more stress than any other engine fastener. Each Alpha Series Rod features high-quality, Skunk2-branded, 3\/8-inch ARP2000 bolts. ARP2000 rod bolts are forged, heat-treated, precision-machined, and capable of clamping loads as high as 220,000 psi. Precision-machined, bronze wrist pin bushings are also fitted to each Alpha Series Rod for increased wear resistance, and are compatible with most aftermarket pistons without additional machining.\n\n \n\nNot all forged H-beam rods are the same. Only Skunk2’s Alpha Series Rods feature our unique design, precision machining, and are capable of handling more than 900 hp, all at an economical price.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eB18C5 | 1800cc | DOHC | 16v | NA | I4,B18C6 | 1800cc | DOHC | 16v | NA | I4,B18C7 | 1800cc | DOHC | 16v | NA | I4,B18C1 | 1800cc | DOHC | 16v | NA | I4,B18C2 | 1800cc | DOHC | 16v | NA | I4,B18C3 | 1800cc | DOHC | 16v | NA | I4,B18C4 | 1800cc | DOHC | 16v | NA | I4\u003c!--split--\u003e"}

{"id":7199402885302,"title":"Carrillo Mitsibishi 4G63 2nd Gen \u0026 Lancer EVO Pro-SA 3\/8 WMC Bolt Single Connecting Rod","handle":"carrillo-mitsubishi-4g63-2nd-gen-lancer-evo-pro-sa-3-8-wmc-bolt-single-connecting-rod-scr4259-1","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR4259-1\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eB16A1 | 1600cc | DOHC | 16v | NA | I4,B16A2 | 1600cc | DOHC | 16v | NA | I4,B16A3 | 1600cc | DOHC | 16v | NA | I4,B16A4 | 1600cc | DOHC | 16v | NA | I4,B16A5 | 1600cc | DOHC | 16v | NA | I4,B16A6 | 1600cc | DOHC | 16v | NA | I4\u003c!--split--\u003e","published_at":"2021-12-14T18:33:45+08:00","created_at":"2021-12-14T18:21:49+08:00","vendor":"Carrillo","type":"Build Your Block","tags":["b16a1-1600cc-dohc-16v-na-i4","b16a2-1600cc-dohc-16v-na-i4","b16a3-1600cc-dohc-16v-na-i4","b16a4-1600cc-dohc-16v-na-i4","b16a5-1600cc-dohc-16v-na-i4","b16a6-1600cc-dohc-16v-na-i4","build-your-block","carrillo","conrods-kit","honda","us1","ws18"],"price":45356,"price_min":45356,"price_max":45356,"available":true,"price_varies":false,"compare_at_price":49300,"compare_at_price_min":49300,"compare_at_price_max":49300,"compare_at_price_varies":false,"variants":[{"id":40995229991094,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SCR4259-1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Carrillo Mitsibishi 4G63 2nd Gen \u0026 Lancer EVO Pro-SA 3\/8 WMC Bolt Single Connecting Rod","public_title":null,"options":["Default Title"],"price":45356,"weight":4907,"compare_at_price":49300,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-mitsibishi-4g63-2nd-gen-and-lancer-evo-pro-sa-38-wmc-bolt-single-connecting-rod-rzcrew.jpg?v=1710321711"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-mitsibishi-4g63-2nd-gen-and-lancer-evo-pro-sa-38-wmc-bolt-single-connecting-rod-rzcrew.jpg?v=1710321711","options":["Title"],"media":[{"alt":"Carrillo Mitsubishi 4G63 2nd Gen \u0026 Lancer EVO Pro-SA 3\/8 WMC Bolt Single Connecting Rod - SCR4259-1","id":23157976662198,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-mitsibishi-4g63-2nd-gen-and-lancer-evo-pro-sa-38-wmc-bolt-single-connecting-rod-rzcrew.jpg?v=1710321711"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-mitsibishi-4g63-2nd-gen-and-lancer-evo-pro-sa-38-wmc-bolt-single-connecting-rod-rzcrew.jpg?v=1710321711","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR4259-1\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eB16A1 | 1600cc | DOHC | 16v | NA | I4,B16A2 | 1600cc | DOHC | 16v | NA | I4,B16A3 | 1600cc | DOHC | 16v | NA | I4,B16A4 | 1600cc | DOHC | 16v | NA | I4,B16A5 | 1600cc | DOHC | 16v | NA | I4,B16A6 | 1600cc | DOHC | 16v | NA | I4\u003c!--split--\u003e"}

{"id":7199397445814,"title":"Carrillo Honda\/Acura K24A Pro-SA 3\/8 WMC Bolt Connecting Rods","handle":"carrillo-honda-acura-k24a-pro-sa-3-8-wmc-bolt-connecting-rods-scr4726-4","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR4726-4\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eK20A | 2000cc | DOHC | 16v | NA | I4,K20A2 | 2000cc | DOHC | 16v | NA | I4,K20A3 | 2000cc | DOHC | 16v | NA | I4\u003c!--split--\u003e","published_at":"2021-12-14T18:33:03+08:00","created_at":"2021-12-14T18:19:41+08:00","vendor":"Carrillo","type":"Build Your Block","tags":["build-your-block","carrillo","conrods-kit","honda","k20a-2000cc-dohc-16v-na-i4","k20a2-2000cc-dohc-16v-na-i4","k20a3-2000cc-dohc-16v-na-i4","us1","ws14"],"price":156768,"price_min":156768,"price_max":156768,"available":true,"price_varies":false,"compare_at_price":163300,"compare_at_price_min":163300,"compare_at_price_max":163300,"compare_at_price_varies":false,"variants":[{"id":40995207643318,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SCR4726-4","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Carrillo Honda\/Acura K24A Pro-SA 3\/8 WMC Bolt Connecting Rods","public_title":null,"options":["Default Title"],"price":156768,"weight":10804,"compare_at_price":163300,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-hondaacura-k24a-pro-sa-38-wmc-bolt-connecting-rods-rzcrew.jpg?v=1710321758"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-hondaacura-k24a-pro-sa-38-wmc-bolt-connecting-rods-rzcrew.jpg?v=1710321758","options":["Title"],"media":[{"alt":"Carrillo Honda\/Acura K24A Pro-SA 3\/8 WMC Bolt Connecting Rods - SCR4726-4","id":23157959458998,"position":1,"preview_image":{"aspect_ratio":1.446,"height":747,"width":1080,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-hondaacura-k24a-pro-sa-38-wmc-bolt-connecting-rods-rzcrew.jpg?v=1710321758"},"aspect_ratio":1.446,"height":747,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-hondaacura-k24a-pro-sa-38-wmc-bolt-connecting-rods-rzcrew.jpg?v=1710321758","width":1080}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR4726-4\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eK20A | 2000cc | DOHC | 16v | NA | I4,K20A2 | 2000cc | DOHC | 16v | NA | I4,K20A3 | 2000cc | DOHC | 16v | NA | I4\u003c!--split--\u003e"}

{"id":7199397281974,"title":"Carrillo Honda\/Acura K20A Pro-A 3\/8 WMC Bolt Connecting Rods (Special Order No Cancel)","handle":"carrillo-honda-acura-k20a-pro-a-3-8-wmc-bolt-connecting-rods-special-order-no-cancel-scr4237-4","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR4237-4\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 1 left in stock!\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eB16A1 | 1600cc | DOHC | 16v | NA | I4,B16A2 | 1600cc | DOHC | 16v | NA | I4,B16A3 | 1600cc | DOHC | 16v | NA | I4,B16A4 | 1600cc | DOHC | 16v | NA | I4,B16A5 | 1600cc | DOHC | 16v | NA | I4,B16A6 | 1600cc | DOHC | 16v | NA | I4\u003c!--split--\u003e","published_at":"2021-12-14T18:33:01+08:00","created_at":"2021-12-14T18:19:37+08:00","vendor":"Carrillo","type":"Build Your Block","tags":["b16a1-1600cc-dohc-16v-na-i4","b16a2-1600cc-dohc-16v-na-i4","b16a3-1600cc-dohc-16v-na-i4","b16a4-1600cc-dohc-16v-na-i4","b16a5-1600cc-dohc-16v-na-i4","b16a6-1600cc-dohc-16v-na-i4","build-your-block","carrillo","conrods-kit","honda","us1","ws15"],"price":148105,"price_min":148105,"price_max":148105,"available":true,"price_varies":false,"compare_at_price":155900,"compare_at_price_min":155900,"compare_at_price_max":155900,"compare_at_price_varies":false,"variants":[{"id":40995207479478,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SCR4237-4","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Carrillo Honda\/Acura K20A Pro-A 3\/8 WMC Bolt Connecting Rods (Special Order No Cancel)","public_title":null,"options":["Default Title"],"price":148105,"weight":10804,"compare_at_price":155900,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-hondaacura-k20a-pro-a-38-wmc-bolt-connecting-rods-special-order-no-cancel-rzcrew.jpg?v=1710321765"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-hondaacura-k20a-pro-a-38-wmc-bolt-connecting-rods-special-order-no-cancel-rzcrew.jpg?v=1710321765","options":["Title"],"media":[{"alt":"Carrillo Honda\/Acura K20A Pro-A 3\/8 WMC Bolt Connecting Rods (Special Order No Cancel) - SCR4237-4","id":23157958738102,"position":1,"preview_image":{"aspect_ratio":1.446,"height":747,"width":1080,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-hondaacura-k20a-pro-a-38-wmc-bolt-connecting-rods-special-order-no-cancel-rzcrew.jpg?v=1710321765"},"aspect_ratio":1.446,"height":747,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-hondaacura-k20a-pro-a-38-wmc-bolt-connecting-rods-special-order-no-cancel-rzcrew.jpg?v=1710321765","width":1080}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR4237-4\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 1 left in stock!\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eB16A1 | 1600cc | DOHC | 16v | NA | I4,B16A2 | 1600cc | DOHC | 16v | NA | I4,B16A3 | 1600cc | DOHC | 16v | NA | I4,B16A4 | 1600cc | DOHC | 16v | NA | I4,B16A5 | 1600cc | DOHC | 16v | NA | I4,B16A6 | 1600cc | DOHC | 16v | NA | I4\u003c!--split--\u003e"}

{"id":7199397150902,"title":"Carrillo Honda\/Acura H23\/B20A\/F22 Pro-H 3\/8 WMC Bolt Connecting Rods","handle":"carrillo-honda-acura-h23-b20a-f22-pro-h-3-8-wmc-bolt-connecting-rods-scr5391-4","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR5391-4\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eH23A | 2300cc | DOHC | 16v | NA | I4\u003c!--split--\u003e","published_at":"2021-12-14T18:33:03+08:00","created_at":"2021-12-14T18:19:33+08:00","vendor":"Carrillo","type":"Build Your Block","tags":["build-your-block","carrillo","conrods-kit","h23a-2300cc-dohc-16v-na-i4","honda","us1","ws14"],"price":156768,"price_min":156768,"price_max":156768,"available":true,"price_varies":false,"compare_at_price":163300,"compare_at_price_min":163300,"compare_at_price_max":163300,"compare_at_price_varies":false,"variants":[{"id":40995204726966,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SCR5391-4","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Carrillo Honda\/Acura H23\/B20A\/F22 Pro-H 3\/8 WMC Bolt Connecting Rods","public_title":null,"options":["Default Title"],"price":156768,"weight":10804,"compare_at_price":163300,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-hondaacura-h23b20af22-pro-h-38-wmc-bolt-connecting-rods-rzcrew.jpg?v=1710321765"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-hondaacura-h23b20af22-pro-h-38-wmc-bolt-connecting-rods-rzcrew.jpg?v=1710321765","options":["Title"],"media":[{"alt":"Carrillo Honda\/Acura H23\/B20A\/F22 Pro-H 3\/8 WMC Bolt Connecting Rods - SCR5391-4","id":23157958574262,"position":1,"preview_image":{"aspect_ratio":1.446,"height":747,"width":1080,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-hondaacura-h23b20af22-pro-h-38-wmc-bolt-connecting-rods-rzcrew.jpg?v=1710321765"},"aspect_ratio":1.446,"height":747,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-hondaacura-h23b20af22-pro-h-38-wmc-bolt-connecting-rods-rzcrew.jpg?v=1710321765","width":1080}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR5391-4\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eH23A | 2300cc | DOHC | 16v | NA | I4\u003c!--split--\u003e"}

{"id":7199396921526,"title":"Carrillo Honda\/Acura H22 Pro-H 3\/8 CARR Bolt Connecting Rods","handle":"carrillo-honda-acura-h22-pro-h-3-8-carr-bolt-connecting-rods-scr4250-4","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR4250-4\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eH22A | 2200cc | DOHC | 16v | NA | I4\u003c!--split--\u003e","published_at":"2021-12-14T18:33:07+08:00","created_at":"2021-12-14T18:19:30+08:00","vendor":"Carrillo","type":"Build Your Block","tags":["build-your-block","carrillo","conrods-kit","h22a-2200cc-dohc-16v-na-i4","honda","us1","ws14"],"price":185952,"price_min":185952,"price_max":185952,"available":true,"price_varies":false,"compare_at_price":193700,"compare_at_price_min":193700,"compare_at_price_max":193700,"compare_at_price_varies":false,"variants":[{"id":40995204563126,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SCR4250-4","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Carrillo Honda\/Acura H22 Pro-H 3\/8 CARR Bolt Connecting Rods","public_title":null,"options":["Default Title"],"price":185952,"weight":10804,"compare_at_price":193700,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-hondaacura-h22-pro-h-38-carr-bolt-connecting-rods-rzcrew.jpg?v=1710321765"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-hondaacura-h22-pro-h-38-carr-bolt-connecting-rods-rzcrew.jpg?v=1710321765","options":["Title"],"media":[{"alt":"Carrillo Honda\/Acura H22 Pro-H 3\/8 CARR Bolt Connecting Rods - SCR4250-4","id":23157957886134,"position":1,"preview_image":{"aspect_ratio":1.446,"height":747,"width":1080,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-hondaacura-h22-pro-h-38-carr-bolt-connecting-rods-rzcrew.jpg?v=1710321765"},"aspect_ratio":1.446,"height":747,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-hondaacura-h22-pro-h-38-carr-bolt-connecting-rods-rzcrew.jpg?v=1710321765","width":1080}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR4250-4\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eH22A | 2200cc | DOHC | 16v | NA | I4\u003c!--split--\u003e"}

{"id":7199396528310,"title":"Carrillo Honda\/Acura F22C Pro-H 3\/8 CARR Bolt Connecting Rods","handle":"carrillo-honda-acura-f22c-pro-h-3-8-carr-bolt-connecting-rods-scr5386-4","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR5386-4\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eF22C | 2200cc | DOHC | 16v | NA | I4\u003c!--split--\u003e","published_at":"2021-12-14T18:33:04+08:00","created_at":"2021-12-14T18:19:22+08:00","vendor":"Carrillo","type":"Build Your Block","tags":["build-your-block","carrillo","conrods-kit","f22c-2200cc-dohc-16v-na-i4","honda","us1","ws14"],"price":185952,"price_min":185952,"price_max":185952,"available":true,"price_varies":false,"compare_at_price":193700,"compare_at_price_min":193700,"compare_at_price_max":193700,"compare_at_price_varies":false,"variants":[{"id":40995204006070,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SCR5386-4","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Carrillo Honda\/Acura F22C Pro-H 3\/8 CARR Bolt Connecting Rods","public_title":null,"options":["Default Title"],"price":185952,"weight":10804,"compare_at_price":193700,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-hondaacura-f22c-pro-h-38-carr-bolt-connecting-rods-rzcrew.jpg?v=1710321767"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-hondaacura-f22c-pro-h-38-carr-bolt-connecting-rods-rzcrew.jpg?v=1710321767","options":["Title"],"media":[{"alt":"Carrillo Honda\/Acura F22C Pro-H 3\/8 CARR Bolt Connecting Rods - SCR5386-4","id":23157956313270,"position":1,"preview_image":{"aspect_ratio":1.446,"height":747,"width":1080,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-hondaacura-f22c-pro-h-38-carr-bolt-connecting-rods-rzcrew.jpg?v=1710321767"},"aspect_ratio":1.446,"height":747,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-hondaacura-f22c-pro-h-38-carr-bolt-connecting-rods-rzcrew.jpg?v=1710321767","width":1080}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR5386-4\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eF22C | 2200cc | DOHC | 16v | NA | I4\u003c!--split--\u003e"}

{"id":7199396364470,"title":"Carrillo Honda\/Acura F22C Pro-SA 3\/8 WMC Bolt Connecting Rods","handle":"carrillo-honda-acura-f22c-pro-sa-3-8-wmc-bolt-connecting-rods-scr5384-4","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR5384-4\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eF22C | 2200cc | DOHC | 16v | NA | I4\u003c!--split--\u003e","published_at":"2021-12-14T18:33:03+08:00","created_at":"2021-12-14T18:19:18+08:00","vendor":"Carrillo","type":"Build Your Block","tags":["build-your-block","carrillo","conrods-kit","f22c-2200cc-dohc-16v-na-i4","honda","us1","ws14"],"price":156768,"price_min":156768,"price_max":156768,"available":true,"price_varies":false,"compare_at_price":163300,"compare_at_price_min":163300,"compare_at_price_max":163300,"compare_at_price_varies":false,"variants":[{"id":40995201646774,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SCR5384-4","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Carrillo Honda\/Acura F22C Pro-SA 3\/8 WMC Bolt Connecting Rods","public_title":null,"options":["Default Title"],"price":156768,"weight":10804,"compare_at_price":163300,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-hondaacura-f22c-pro-sa-38-wmc-bolt-connecting-rods-rzcrew.jpg?v=1710321768"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-hondaacura-f22c-pro-sa-38-wmc-bolt-connecting-rods-rzcrew.jpg?v=1710321768","options":["Title"],"media":[{"alt":"Carrillo Honda\/Acura F22C Pro-SA 3\/8 WMC Bolt Connecting Rods - SCR5384-4","id":23157955690678,"position":1,"preview_image":{"aspect_ratio":1.446,"height":747,"width":1080,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-hondaacura-f22c-pro-sa-38-wmc-bolt-connecting-rods-rzcrew.jpg?v=1710321768"},"aspect_ratio":1.446,"height":747,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-hondaacura-f22c-pro-sa-38-wmc-bolt-connecting-rods-rzcrew.jpg?v=1710321768","width":1080}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR5384-4\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eF22C | 2200cc | DOHC | 16v | NA | I4\u003c!--split--\u003e"}

{"id":7199397675190,"title":"Carrillo Honda\/Acura K24A Pro-H 3\/8 CARR Bolt Connecting Rods","handle":"carrillo-honda-acura-k24a-pro-h-3-8-carr-bolt-connecting-rods-scr4248-4","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR4248-4\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eK24A1 | 2400cc | DOHC | 16v | NA | I4,K24A2 | 2400cc | DOHC | 16v | NA | I4,K24A3 | 2400cc | DOHC | 16v | NA | I4,K24A4 | 2400cc | DOHC | 16v | NA | I4,K24A8 | 2400cc | DOHC | 16v | NA | I4,K24Y1 | 2400cc | DOHC | 16v | NA | I4,K24Y2 | 2400cc | DOHC | 16v | NA | I4,K24Z1 | 2400cc | DOHC | 16v | NA | I4,K24Z2 | 2400cc | DOHC | 16v | NA | I4,K24Z3 | 2400cc | DOHC | 16v | NA | I4,K24Z4 | 2400cc | DOHC | 16v | NA | I4,K24Z5 | 2400cc | DOHC | 16v | NA | I4,K24Z6 | 2400cc | DOHC | 16v | NA | I4,K24Z7 | 2400cc | DOHC | 16v | NA | I4\u003c!--split--\u003e","published_at":"2021-12-14T18:33:07+08:00","created_at":"2021-12-14T18:19:46+08:00","vendor":"Carrillo","type":"Build Your Block","tags":["build-your-block","carrillo","conrods-kit","honda","k24a1-2400cc-dohc-16v-na-i4","k24a2-2400cc-dohc-16v-na-i4","k24a3-2400cc-dohc-16v-na-i4","k24a4-2400cc-dohc-16v-na-i4","k24a8-2400cc-dohc-16v-na-i4","k24y1-2400cc-dohc-16v-na-i4","k24y2-2400cc-dohc-16v-na-i4","k24z1-2400cc-dohc-16v-na-i4","k24z2-2400cc-dohc-16v-na-i4","k24z3-2400cc-dohc-16v-na-i4","k24z4-2400cc-dohc-16v-na-i4","k24z5-2400cc-dohc-16v-na-i4","k24z6-2400cc-dohc-16v-na-i4","k24z7-2400cc-dohc-16v-na-i4","us1","ws14"],"price":185952,"price_min":185952,"price_max":185952,"available":true,"price_varies":false,"compare_at_price":193700,"compare_at_price_min":193700,"compare_at_price_max":193700,"compare_at_price_varies":false,"variants":[{"id":40995207872694,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SCR4248-4","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Carrillo Honda\/Acura K24A Pro-H 3\/8 CARR Bolt Connecting Rods","public_title":null,"options":["Default Title"],"price":185952,"weight":6676,"compare_at_price":193700,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-hondaacura-k24a-pro-h-38-carr-bolt-connecting-rods-rzcrew.jpg?v=1710321757"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-hondaacura-k24a-pro-h-38-carr-bolt-connecting-rods-rzcrew.jpg?v=1710321757","options":["Title"],"media":[{"alt":"Carrillo Honda\/Acura K24A Pro-H 3\/8 CARR Bolt Connecting Rods - SCR4248-4","id":23157960343734,"position":1,"preview_image":{"aspect_ratio":1.446,"height":747,"width":1080,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-hondaacura-k24a-pro-h-38-carr-bolt-connecting-rods-rzcrew.jpg?v=1710321757"},"aspect_ratio":1.446,"height":747,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-hondaacura-k24a-pro-h-38-carr-bolt-connecting-rods-rzcrew.jpg?v=1710321757","width":1080}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR4248-4\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eK24A1 | 2400cc | DOHC | 16v | NA | I4,K24A2 | 2400cc | DOHC | 16v | NA | I4,K24A3 | 2400cc | DOHC | 16v | NA | I4,K24A4 | 2400cc | DOHC | 16v | NA | I4,K24A8 | 2400cc | DOHC | 16v | NA | I4,K24Y1 | 2400cc | DOHC | 16v | NA | I4,K24Y2 | 2400cc | DOHC | 16v | NA | I4,K24Z1 | 2400cc | DOHC | 16v | NA | I4,K24Z2 | 2400cc | DOHC | 16v | NA | I4,K24Z3 | 2400cc | DOHC | 16v | NA | I4,K24Z4 | 2400cc | DOHC | 16v | NA | I4,K24Z5 | 2400cc | DOHC | 16v | NA | I4,K24Z6 | 2400cc | DOHC | 16v | NA | I4,K24Z7 | 2400cc | DOHC | 16v | NA | I4\u003c!--split--\u003e"}

{"id":7199397576886,"title":"Carrillo Honda\/Acura K24A Pro-H 3\/8 WMC Bolt Connecting Rods","handle":"carrillo-honda-acura-k24a-pro-h-3-8-wmc-bolt-connecting-rods-scr4270-4","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR4270-4\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eK20A | 2000cc | DOHC | 16v | NA | I4,K20A2 | 2000cc | DOHC | 16v | NA | I4,K20A3 | 2000cc | DOHC | 16v | NA | I4\u003c!--split--\u003e","published_at":"2021-12-14T18:33:04+08:00","created_at":"2021-12-14T18:19:45+08:00","vendor":"Carrillo","type":"Build Your Block","tags":["build-your-block","carrillo","conrods-kit","honda","k20a-2000cc-dohc-16v-na-i4","k20a2-2000cc-dohc-16v-na-i4","k20a3-2000cc-dohc-16v-na-i4","us1","ws14"],"price":156768,"price_min":156768,"price_max":156768,"available":true,"price_varies":false,"compare_at_price":163300,"compare_at_price_min":163300,"compare_at_price_max":163300,"compare_at_price_varies":false,"variants":[{"id":40995207774390,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SCR4270-4","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Carrillo Honda\/Acura K24A Pro-H 3\/8 WMC Bolt Connecting Rods","public_title":null,"options":["Default Title"],"price":156768,"weight":10804,"compare_at_price":163300,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-hondaacura-k24a-pro-h-38-wmc-bolt-connecting-rods-rzcrew.jpg?v=1710321758"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-hondaacura-k24a-pro-h-38-wmc-bolt-connecting-rods-rzcrew.jpg?v=1710321758","options":["Title"],"media":[{"alt":"Carrillo Honda\/Acura K24A Pro-H 3\/8 WMC Bolt Connecting Rods - SCR4270-4","id":23157959950518,"position":1,"preview_image":{"aspect_ratio":1.446,"height":747,"width":1080,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-hondaacura-k24a-pro-h-38-wmc-bolt-connecting-rods-rzcrew.jpg?v=1710321758"},"aspect_ratio":1.446,"height":747,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-hondaacura-k24a-pro-h-38-wmc-bolt-connecting-rods-rzcrew.jpg?v=1710321758","width":1080}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR4270-4\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eK20A | 2000cc | DOHC | 16v | NA | I4,K20A2 | 2000cc | DOHC | 16v | NA | I4,K20A3 | 2000cc | DOHC | 16v | NA | I4\u003c!--split--\u003e"}

{"id":7199397511350,"title":"Carrillo Honda\/Acura K20A Pro-H 3\/8 WMC Bolt Connecting Rods","handle":"carrillo-honda-acura-k20a-pro-h-3-8-wmc-bolt-connecting-rods-scr5143-4","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR5143-4\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eK20A | 2000cc | DOHC | 16v | NA | I4,K20A2 | 2000cc | DOHC | 16v | NA | I4,K20A3 | 2000cc | DOHC | 16v | NA | I4\u003c!--split--\u003e","published_at":"2021-12-14T18:33:07+08:00","created_at":"2021-12-14T18:19:43+08:00","vendor":"Carrillo","type":"Build Your Block","tags":["build-your-block","carrillo","conrods-kit","honda","k20a-2000cc-dohc-16v-na-i4","k20a2-2000cc-dohc-16v-na-i4","k20a3-2000cc-dohc-16v-na-i4","us1","ws14"],"price":156768,"price_min":156768,"price_max":156768,"available":true,"price_varies":false,"compare_at_price":163300,"compare_at_price_min":163300,"compare_at_price_max":163300,"compare_at_price_varies":false,"variants":[{"id":40995207708854,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SCR5143-4","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Carrillo Honda\/Acura K20A Pro-H 3\/8 WMC Bolt Connecting Rods","public_title":null,"options":["Default Title"],"price":156768,"weight":10804,"compare_at_price":163300,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-hondaacura-k20a-pro-h-38-wmc-bolt-connecting-rods-rzcrew.jpg?v=1710321758"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-hondaacura-k20a-pro-h-38-wmc-bolt-connecting-rods-rzcrew.jpg?v=1710321758","options":["Title"],"media":[{"alt":"Carrillo Honda\/Acura K20A Pro-H 3\/8 WMC Bolt Connecting Rods - SCR5143-4","id":23157959590070,"position":1,"preview_image":{"aspect_ratio":1.446,"height":747,"width":1080,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-hondaacura-k20a-pro-h-38-wmc-bolt-connecting-rods-rzcrew.jpg?v=1710321758"},"aspect_ratio":1.446,"height":747,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/carrillo-hondaacura-k20a-pro-h-38-wmc-bolt-connecting-rods-rzcrew.jpg?v=1710321758","width":1080}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Carrillo\u003cbr\u003eReference Number: SCR5143-4\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSimply the best Aftermarket conrod out there. Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.\u003cbr\u003e\u003cbr\u003e\n\n\nAll heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.\u003cbr\u003e\n\n\nAll Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.\u003cbr\u003e\n\n\nCarrillo employs fasteners jointly designed by Carrillo. We employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All our fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.\u003cbr\u003e\u003cbr\u003e\n\n\nThe CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation. \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eK20A | 2000cc | DOHC | 16v | NA | I4,K20A2 | 2000cc | DOHC | 16v | NA | I4,K20A3 | 2000cc | DOHC | 16v | NA | I4\u003c!--split--\u003e"}