Cooling

{"id":2095459139681,"title":"RRP Racing service Middle Temp Thermostat (75 Deg C) Suzuki Swift Sport ZC31S","handle":"rrp-racing-service-middle-temp-thermostat-75-deg-c-suzuki-swift-sport-zc31s-e32-300a","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RRP Racing service\u003cbr\u003ePart Number: E32-300A\u003cbr\u003eOpening temperature: 75 Deg C\u003cbr\u003e\u003cbr\u003eSwift's temperature control is very severe. Earls decided to sell middle temp thermostats from many test results such as supercharger and super ECU. \nIt turned out that there are many cases where the performance of the engine has not been fully achieved with the conventional low temperature thermostat (the one at about 65 degrees). When using a low-temp thermostat, the temperature was too low during driving, leading to power down and fuel consumption down, and I sometimes felt that the power and response were bad although I did not know what it was. If the water temperature drops below 80 degrees, the computer may misunderstand that the engine is cold and the operation of variable valve and electronic throttle etc. may become worse and the engine performance may be suppressed.\u003cbr\u003e\u003cbr\u003e\n\n\nThe engine performance will go down without knowing it. However, it is better to lower the water temperature properly as much as possible, so I thought about the middle temp thermostat. \nBy using this thermostat, it is possible to always keep the temperature from 80 degrees to 95 degrees at which the performance of the engine can be obtained the most, and you can use it with confidence. \nPlease try it!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC31S | 2004-2010 | NA | M16A | I4\u003c!--split--\u003eSwift Sport | ZC31S | 2004-2010 | NA | M16A | I4\u003cbr\u003e","published_at":"2019-04-26T16:22:39+08:00","created_at":"2019-04-26T16:22:40+08:00","vendor":"RRP Racing service","type":"Thermostats","tags":["2004","2005","2006","2007","2008","2009","2010","4000x5y1.5z0","cooling","CTA221","JP1","rrp-racing-service","suzuki","swift-sport-zc31s-2004-2010-na-m16a-i4","thermostats","ws118"],"price":4959,"price_min":4959,"price_max":4959,"available":true,"price_varies":false,"compare_at_price":5700,"compare_at_price_min":5700,"compare_at_price_max":5700,"compare_at_price_varies":false,"variants":[{"id":19755695374433,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"E32-300A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"RRP Racing service Middle Temp Thermostat (75 Deg C) Suzuki Swift Sport ZC31S","public_title":null,"options":["Default Title"],"price":4959,"weight":500,"compare_at_price":5700,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/E32-300A_5489bf9b-73c0-4589-988b-0f8eccf1897d.jpg?v=1710179453"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/E32-300A_5489bf9b-73c0-4589-988b-0f8eccf1897d.jpg?v=1710179453","options":["Title"],"media":[{"alt":"RRP Racing service - Middle Temp Thermostat (75 Deg C) - Suzuki - Swift Sport ZC31S - E32-300A - RZCREWGARAGE","id":26388492615862,"position":1,"preview_image":{"aspect_ratio":1.333,"height":450,"width":600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/E32-300A_5489bf9b-73c0-4589-988b-0f8eccf1897d.jpg?v=1710179453"},"aspect_ratio":1.333,"height":450,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/E32-300A_5489bf9b-73c0-4589-988b-0f8eccf1897d.jpg?v=1710179453","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: RRP Racing service\u003cbr\u003ePart Number: E32-300A\u003cbr\u003eOpening temperature: 75 Deg C\u003cbr\u003e\u003cbr\u003eSwift's temperature control is very severe. Earls decided to sell middle temp thermostats from many test results such as supercharger and super ECU. \nIt turned out that there are many cases where the performance of the engine has not been fully achieved with the conventional low temperature thermostat (the one at about 65 degrees). When using a low-temp thermostat, the temperature was too low during driving, leading to power down and fuel consumption down, and I sometimes felt that the power and response were bad although I did not know what it was. If the water temperature drops below 80 degrees, the computer may misunderstand that the engine is cold and the operation of variable valve and electronic throttle etc. may become worse and the engine performance may be suppressed.\u003cbr\u003e\u003cbr\u003e\n\n\nThe engine performance will go down without knowing it. However, it is better to lower the water temperature properly as much as possible, so I thought about the middle temp thermostat. \nBy using this thermostat, it is possible to always keep the temperature from 80 degrees to 95 degrees at which the performance of the engine can be obtained the most, and you can use it with confidence. \nPlease try it!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC31S | 2004-2010 | NA | M16A | I4\u003c!--split--\u003eSwift Sport | ZC31S | 2004-2010 | NA | M16A | I4\u003cbr\u003e"}

{"id":1924673044577,"title":"Billion - Super Thermo Low Temp Thermostat (68 Deg C) - Suzuki - Swift ZC21S","handle":"billion-super-thermo-low-temp-thermostat-68-deg-c-suzuki-swift-sport-zc31s-bssz-43","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Billion\u003cbr\u003ePart Number: BSSZ-43\u003cbr\u003eOpening temperature: 68 Deg C\u003cbr\u003e\u003cbr\u003eThis is a drop-in direct replacement for your OEM unit and will increase the vehicles cooling ability by opening at a lower temperature. An essential part for improving cooling performance.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC31S | 2004-2010 | NA | M16A | I4\u003c!--split--\u003eSwift Sport | ZC31S | 2004-2010 | NA | M16A | I4\u003cbr\u003e","published_at":"2025-04-08T16:44:21+08:00","created_at":"2019-01-03T18:45:05+08:00","vendor":"Billion","type":"Thermostats","tags":["2004","2005","2006","2007","2008","2009","2010","7500x20y1.1z1000","billion","cooling","CTA210","JP1","suzuki","swift-sport-zc31s-2004-2010-na-m16a-i4","thermostats","ws18"],"price":7566,"price_min":7566,"price_max":7566,"available":true,"price_varies":false,"compare_at_price":7800,"compare_at_price_min":7800,"compare_at_price_max":7800,"compare_at_price_varies":false,"variants":[{"id":18328208736353,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BSSZ-43","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Billion - Super Thermo Low Temp Thermostat (68 Deg C) - Suzuki - Swift ZC21S","public_title":null,"options":["Default Title"],"price":7566,"weight":1000,"compare_at_price":7800,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Billion_Super_Thermo_Thermostat_621622aa-66d2-4fdd-ac30-a9812b779603.jpg?v=1710168677"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Billion_Super_Thermo_Thermostat_621622aa-66d2-4fdd-ac30-a9812b779603.jpg?v=1710168677","options":["Title"],"media":[{"alt":"Billion - Super Thermo Low Temp Thermostat (68 Deg C) - Suzuki - Swift Sport ZC31S - BSSZ-43  - RZCREWGARAGE","id":26388490420406,"position":1,"preview_image":{"aspect_ratio":1.333,"height":600,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Billion_Super_Thermo_Thermostat_621622aa-66d2-4fdd-ac30-a9812b779603.jpg?v=1710168677"},"aspect_ratio":1.333,"height":600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Billion_Super_Thermo_Thermostat_621622aa-66d2-4fdd-ac30-a9812b779603.jpg?v=1710168677","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Billion\u003cbr\u003ePart Number: BSSZ-43\u003cbr\u003eOpening temperature: 68 Deg C\u003cbr\u003e\u003cbr\u003eThis is a drop-in direct replacement for your OEM unit and will increase the vehicles cooling ability by opening at a lower temperature. An essential part for improving cooling performance.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC31S | 2004-2010 | NA | M16A | I4\u003c!--split--\u003eSwift Sport | ZC31S | 2004-2010 | NA | M16A | I4\u003cbr\u003e"}

{"id":1924673077345,"title":"Billion - Super Thermo Low Temp Thermostat (68 Deg C) - Suzuki - Swift Sport ZC31S","handle":"billion-super-thermo-low-temp-thermostat-68-deg-c-suzuki-swift-zc21s-bssz-43","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Billion\u003cbr\u003ePart Number: BSSZ-43\u003cbr\u003eOpening temperature: 68 Deg C\u003cbr\u003e\u003cbr\u003eThis is a drop-in direct replacement for your OEM unit and will increase the vehicles cooling ability by opening at a lower temperature. An essential part for improving cooling performance.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSwift | ZC21S | 2004-2010 | NA | M15A | I4\u003c!--split--\u003eSwift | ZC21S | 2004-2010 | NA | M15A | I4\u003cbr\u003e","published_at":"2025-04-08T16:44:21+08:00","created_at":"2019-01-03T18:45:06+08:00","vendor":"Billion","type":"Thermostats","tags":["2004","2005","2006","2007","2008","2009","2010","7500x20y1.1z1000","billion","cooling","CTA210","JP1","suzuki","swift-zc21s-2004-2010-na-m15a-i4","thermostats","ws18"],"price":7566,"price_min":7566,"price_max":7566,"available":true,"price_varies":false,"compare_at_price":7800,"compare_at_price_min":7800,"compare_at_price_max":7800,"compare_at_price_varies":false,"variants":[{"id":18328208769121,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BSSZ-43","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Billion - Super Thermo Low Temp Thermostat (68 Deg C) - Suzuki - Swift Sport ZC31S","public_title":null,"options":["Default Title"],"price":7566,"weight":1000,"compare_at_price":7800,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Billion_Super_Thermo_Thermostat_d080abf3-4b9b-4b9d-9bc9-7f9542c1c8e3.jpg?v=1710168679"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Billion_Super_Thermo_Thermostat_d080abf3-4b9b-4b9d-9bc9-7f9542c1c8e3.jpg?v=1710168679","options":["Title"],"media":[{"alt":"Billion - Super Thermo Low Temp Thermostat (68 Deg C) - Suzuki - Swift ZC21S - BSSZ-43  - RZCREWGARAGE","id":26388490453174,"position":1,"preview_image":{"aspect_ratio":1.333,"height":600,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Billion_Super_Thermo_Thermostat_d080abf3-4b9b-4b9d-9bc9-7f9542c1c8e3.jpg?v=1710168679"},"aspect_ratio":1.333,"height":600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Billion_Super_Thermo_Thermostat_d080abf3-4b9b-4b9d-9bc9-7f9542c1c8e3.jpg?v=1710168679","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Billion\u003cbr\u003ePart Number: BSSZ-43\u003cbr\u003eOpening temperature: 68 Deg C\u003cbr\u003e\u003cbr\u003eThis is a drop-in direct replacement for your OEM unit and will increase the vehicles cooling ability by opening at a lower temperature. An essential part for improving cooling performance.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSwift | ZC21S | 2004-2010 | NA | M15A | I4\u003c!--split--\u003eSwift | ZC21S | 2004-2010 | NA | M15A | I4\u003cbr\u003e"}

{"id":1904234791009,"title":"Billion - Super Thermo Low Temp Thermostat (65 Deg C) - Toyota - 1JZ, 2JZ, 1NZ, 2NZ","handle":"billion-super-thermo-low-temp-thermostat-65-deg-c-toyota-1jz-2jz-1nz-2nz-bst-s07","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Billion\u003cbr\u003ePart Number: BST-S07\u003cbr\u003eOpening temperature: 65 Deg C\u003cbr\u003e\u003cbr\u003eThis is a drop-in direct replacement for your OEM unit and will increase the vehicles cooling ability by opening at a lower temperature. An essential part for improving cooling performance.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eAllion | NZT240 | 2001-2001 | NA | 1NZ-FE | I4\u003c!--split--\u003eAllion | NZT240 | 2001-2001 | NA | 1NZ-FE | I4\u003cbr\u003e","published_at":"2018-11-22T20:11:33+08:00","created_at":"2018-11-22T20:11:33+08:00","vendor":"Billion","type":"Thermostats","tags":["1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","7500x20y1.1z1000","billion","cooling","CTA210","JP1","thermostats","toyota","ws18"],"price":7566,"price_min":7566,"price_max":7566,"available":true,"price_varies":false,"compare_at_price":7800,"compare_at_price_min":7800,"compare_at_price_max":7800,"compare_at_price_varies":false,"variants":[{"id":18151270908001,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BST-S07","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Billion - Super Thermo Low Temp Thermostat (65 Deg C) - Toyota - 1JZ, 2JZ, 1NZ, 2NZ","public_title":null,"options":["Default Title"],"price":7566,"weight":1000,"compare_at_price":7800,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Billion_Super_Thermo_Thermostat_2364f546-9736-4869-baf7-4691d788ad04.jpg?v=1710168495"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Billion_Super_Thermo_Thermostat_2364f546-9736-4869-baf7-4691d788ad04.jpg?v=1710168495","options":["Title"],"media":[{"alt":"billion-super-thermo-low-temp-thermostat-65-deg-c-toyota-1jz-2jz-1nz-2nz-bst-s07 - RZCREWGARAGE","id":26388489175222,"position":1,"preview_image":{"aspect_ratio":1.333,"height":600,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Billion_Super_Thermo_Thermostat_2364f546-9736-4869-baf7-4691d788ad04.jpg?v=1710168495"},"aspect_ratio":1.333,"height":600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Billion_Super_Thermo_Thermostat_2364f546-9736-4869-baf7-4691d788ad04.jpg?v=1710168495","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Billion\u003cbr\u003ePart Number: BST-S07\u003cbr\u003eOpening temperature: 65 Deg C\u003cbr\u003e\u003cbr\u003eThis is a drop-in direct replacement for your OEM unit and will increase the vehicles cooling ability by opening at a lower temperature. An essential part for improving cooling performance.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eAllion | NZT240 | 2001-2001 | NA | 1NZ-FE | I4\u003c!--split--\u003eAllion | NZT240 | 2001-2001 | NA | 1NZ-FE | I4\u003cbr\u003e"}

{"id":2068969488481,"title":"Cusco Japan - Aluminum Cooling Plate - Mazda - RX-8 SE3P","handle":"cusco-japan-aluminum-cooling-plate-mazda-rx-8-se3p","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003eReference Number: 460 003 AL\u003cbr\u003eMaterial: Aluminum\u003cbr\u003e\u003cbr\u003ePerfectly Hand Crafted in Japan, Cusco are famous for their Chassis reinforcement bar as well as their cooling plate. Made of either Aluminum or carbon, all Cusco cooling plate gets the famous jdm manufacturer's logo engraved in it.\u003cbr\u003eWhat is a cooling Plate?\u003cbr\u003eCooling plate closes the gap on top of your radiator and helps reducing air flow turbulences guiding more air throught your radiator. The result is a water temperature decrement during spirited and everyday driving. It also is a stylish part to brighten your engine bay with this fine JDM part.\n\n\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eRX-8 | SE3P Zenki | 2003-2008 | NA | 13B-MSP | R,RX-8 | SE3P Kouki | 2008-2013 | NA | 13B-MSP | R\u003c!--split--\u003e","published_at":"2019-04-11T13:19:21+08:00","created_at":"2019-04-11T13:19:21+08:00","vendor":"Cusco Japan","type":"Cooling Plates","tags":["12800x25y1z0","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","cooling","cooling-panels","cooling-plates","CTA401","cusco-japan","mazda","rx-8-se3p-kouki-2008-2013-na-13b-msp-r","rx-8-se3p-zenki-2003-2008-na-13b-msp-r","SE3P","ws116"],"price":10680,"price_min":10680,"price_max":10680,"available":true,"price_varies":false,"compare_at_price":12000,"compare_at_price_min":12000,"compare_at_price_max":12000,"compare_at_price_varies":false,"variants":[{"id":19581023682657,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"460 003 AL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan - Aluminum Cooling Plate - Mazda - RX-8 SE3P","public_title":null,"options":["Default Title"],"price":10680,"weight":8000,"compare_at_price":12000,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Radiator_Plate_a2ad1ce9-4ca3-4025-ad76-cc3963e49da6.png?v=1710178887"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Radiator_Plate_a2ad1ce9-4ca3-4025-ad76-cc3963e49da6.png?v=1710178887","options":["Title"],"media":[{"alt":"Cusco Japan - Aluminum Cooling Plate - Mazda - RX-8 SE3P ","id":25428036223158,"position":1,"preview_image":{"aspect_ratio":1.142,"height":606,"width":692,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Radiator_Plate_a2ad1ce9-4ca3-4025-ad76-cc3963e49da6.png?v=1710178887"},"aspect_ratio":1.142,"height":606,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Radiator_Plate_a2ad1ce9-4ca3-4025-ad76-cc3963e49da6.png?v=1710178887","width":692}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003eReference Number: 460 003 AL\u003cbr\u003eMaterial: Aluminum\u003cbr\u003e\u003cbr\u003ePerfectly Hand Crafted in Japan, Cusco are famous for their Chassis reinforcement bar as well as their cooling plate. Made of either Aluminum or carbon, all Cusco cooling plate gets the famous jdm manufacturer's logo engraved in it.\u003cbr\u003eWhat is a cooling Plate?\u003cbr\u003eCooling plate closes the gap on top of your radiator and helps reducing air flow turbulences guiding more air throught your radiator. The result is a water temperature decrement during spirited and everyday driving. It also is a stylish part to brighten your engine bay with this fine JDM part.\n\n\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eRX-8 | SE3P Zenki | 2003-2008 | NA | 13B-MSP | R,RX-8 | SE3P Kouki | 2008-2013 | NA | 13B-MSP | R\u003c!--split--\u003e"}

{"id":561990533147,"title":"Mishimoto - Mishimoto BMW E82 E90 E92 E93 Oil Line Fitting Kit - E82 E90 E92 E93 - MMOCF-BMW","handle":"mishimoto-mishimoto-bmw-e82-e90-e92-e93-oil-line-fitting-kit-e82-e90-e92-e93-mmocf-bmw","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOCF-BMW\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Allows for use of -10AN fittings for custom\u003cbr\u003e100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate\u003cbr\u003eIncludes durable stock\u003cbr\u003eBMW O-rings for leak-free installation\u003cbr\u003eProvides additional engine bay space for applications with an oil accumulator or supercharger setup\u003cbr\u003eIncluded as part of the Mishimoto BMW E46 M3 Oil Cooler Kit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial \u003cbr\u003eFITTING CLAMP MATERIAL\u003cbr\u003e303 Stainless Steel\u003cbr\u003e\u003cbr\u003e-10AN FITTINGS MATERIAL\u003cbr\u003e6061 Aluminum\u003cbr\u003e\u003cbr\u003eNote This kit works with vehicles which have stock oil cooler housings.\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes S54, N54, N55\u003cbr\u003eChassis Codes E82, E90, E92, E93\u003cbr\u003eInstall Torque Specs 10 ft\/lbs for Oil Line Fitting Kit bolt\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eOverall Height 1.3\" \u003cbr\u003eOverall Length 2.44\" \u003cbr\u003eOverall Width 1.51\" (assembled) \u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Fitting Clamp \u003cbr\u003e(2) -10AN Fittings \u003cbr\u003e(2) BMW Oil O-rings \u003cbr\u003e(1) M8 x 1.25 x 25mm Button-Head Bolt \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eInstall a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Pair this fitting kit with some Mishimoto stainless steel oil lines and one of our stacked-plate oil coolers to create a complete cooling setup for your BMW. As with all our products, the Mishimoto BMW Oil Line Fitting Kit includes our Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Allows for use of -10AN fittings for custom\u003cbr\u003e100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate\u003cbr\u003eIncludes durable stock\u003cbr\u003eBMW O-rings for leak-free installation\u003cbr\u003eProvides additional engine bay space for applications with an oil accumulator or supercharger setup\u003cbr\u003eIncluded as part of the Mishimoto BMW E46 M3 Oil Cooler Kit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial \u003cbr\u003eFITTING CLAMP MATERIAL\u003cbr\u003e303 Stainless Steel\u003cbr\u003e\u003cbr\u003e-10AN FITTINGS MATERIAL\u003cbr\u003e6061 Aluminum\u003cbr\u003e\u003cbr\u003eNote This kit works with vehicles which have stock oil cooler housings.\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes S54, N54, N55\u003cbr\u003eChassis Codes E82, E90, E92, E93\u003cbr\u003eInstall Torque Specs 10 ft\/lbs for Oil Line Fitting Kit bolt\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eOverall Height 1.3\" \u003cbr\u003eOverall Length 2.44\" \u003cbr\u003eOverall Width 1.51\" (assembled) \u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Fitting Clamp \u003cbr\u003e(2) -10AN Fittings \u003cbr\u003e(2) BMW Oil O-rings \u003cbr\u003e(1) M8 x 1.25 x 25mm Button-Head Bolt \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eInstall a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Pair this fitting kit with some Mishimoto stainless steel oil lines and one of our stacked-plate oil coolers to create a complete cooling setup for your BMW. As with all our products, the Mishimoto BMW Oil Line Fitting Kit includes our Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:53+08:00","created_at":"2018-01-24T23:24:54+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["1-series-e82-2007-2013-tc-i6","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","3-series-cabriolet-e93-2004-2011-na-i6","3-series-cabriolet-e93-2007-2013-tc-i6","3-series-coupe-e92-2004-2011-na-i6","3-series-coupe-e92-2007-2013-tc-i6","3-series-e90-2004-2011-na-i6","3-series-e90-2007-2013-tc-i6","98x27.4y1z0","bmw","car-specific","cooling","CTOT14","mishimoto","oil-cooler-accessories","oil-coolers","US1","ws112"],"price":11904,"price_min":11904,"price_max":11904,"available":true,"price_varies":false,"compare_at_price":12800,"compare_at_price_min":12800,"compare_at_price_max":12800,"compare_at_price_varies":false,"variants":[{"id":5990387712027,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOCF-BMW","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Mishimoto BMW E82 E90 E92 E93 Oil Line Fitting Kit - E82 E90 E92 E93 - MMOCF-BMW","public_title":null,"options":["Default Title"],"price":11904,"weight":4181,"compare_at_price":12800,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOCF-BMW.jpg?v=1710154097"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOCF-BMW.jpg?v=1710154097","options":["Title"],"media":[{"alt":"Mishimoto - Mishimoto BMW E82 E90 E92 E93 Oil Line Fitting Kit - E82 E90 E92 E93 - MMOCF-BMW - Rzcrewgarage","id":1351401144417,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOCF-BMW.jpg?v=1710154097"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOCF-BMW.jpg?v=1710154097","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOCF-BMW\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Allows for use of -10AN fittings for custom\u003cbr\u003e100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate\u003cbr\u003eIncludes durable stock\u003cbr\u003eBMW O-rings for leak-free installation\u003cbr\u003eProvides additional engine bay space for applications with an oil accumulator or supercharger setup\u003cbr\u003eIncluded as part of the Mishimoto BMW E46 M3 Oil Cooler Kit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial \u003cbr\u003eFITTING CLAMP MATERIAL\u003cbr\u003e303 Stainless Steel\u003cbr\u003e\u003cbr\u003e-10AN FITTINGS MATERIAL\u003cbr\u003e6061 Aluminum\u003cbr\u003e\u003cbr\u003eNote This kit works with vehicles which have stock oil cooler housings.\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes S54, N54, N55\u003cbr\u003eChassis Codes E82, E90, E92, E93\u003cbr\u003eInstall Torque Specs 10 ft\/lbs for Oil Line Fitting Kit bolt\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eOverall Height 1.3\" \u003cbr\u003eOverall Length 2.44\" \u003cbr\u003eOverall Width 1.51\" (assembled) \u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Fitting Clamp \u003cbr\u003e(2) -10AN Fittings \u003cbr\u003e(2) BMW Oil O-rings \u003cbr\u003e(1) M8 x 1.25 x 25mm Button-Head Bolt \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eInstall a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Pair this fitting kit with some Mishimoto stainless steel oil lines and one of our stacked-plate oil coolers to create a complete cooling setup for your BMW. As with all our products, the Mishimoto BMW Oil Line Fitting Kit includes our Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Allows for use of -10AN fittings for custom\u003cbr\u003e100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate\u003cbr\u003eIncludes durable stock\u003cbr\u003eBMW O-rings for leak-free installation\u003cbr\u003eProvides additional engine bay space for applications with an oil accumulator or supercharger setup\u003cbr\u003eIncluded as part of the Mishimoto BMW E46 M3 Oil Cooler Kit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial \u003cbr\u003eFITTING CLAMP MATERIAL\u003cbr\u003e303 Stainless Steel\u003cbr\u003e\u003cbr\u003e-10AN FITTINGS MATERIAL\u003cbr\u003e6061 Aluminum\u003cbr\u003e\u003cbr\u003eNote This kit works with vehicles which have stock oil cooler housings.\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes S54, N54, N55\u003cbr\u003eChassis Codes E82, E90, E92, E93\u003cbr\u003eInstall Torque Specs 10 ft\/lbs for Oil Line Fitting Kit bolt\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eOverall Height 1.3\" \u003cbr\u003eOverall Length 2.44\" \u003cbr\u003eOverall Width 1.51\" (assembled) \u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Fitting Clamp \u003cbr\u003e(2) -10AN Fittings \u003cbr\u003e(2) BMW Oil O-rings \u003cbr\u003e(1) M8 x 1.25 x 25mm Button-Head Bolt \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eInstall a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Pair this fitting kit with some Mishimoto stainless steel oil lines and one of our stacked-plate oil coolers to create a complete cooling setup for your BMW. As with all our products, the Mishimoto BMW Oil Line Fitting Kit includes our Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561992040475,"title":"Mishimoto - Mishimoto BMW E36 E46 Oil Line Fitting Kit - E36 E46 - MMOCF-BMW","handle":"mishimoto-mishimoto-bmw-e36-e46-oil-line-fitting-kit-e36-e46-mmocf-bmw","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOCF-BMW\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Allows for use of -10AN fittings for custom\u003cbr\u003e100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate\u003cbr\u003eIncludes durable stock\u003cbr\u003eBMW O-rings for leak-free installation\u003cbr\u003eProvides additional engine bay space for applications with an oil accumulator or supercharger setup\u003cbr\u003eIncluded as part of the Mishimoto BMW E46 M3 Oil Cooler Kit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial \u003cbr\u003eFITTING CLAMP MATERIAL\u003cbr\u003e303 Stainless Steel\u003cbr\u003e\u003cbr\u003e-10AN FITTINGS MATERIAL\u003cbr\u003e6061 Aluminum\u003cbr\u003e\u003cbr\u003eNote This kit works with vehicles which have stock oil cooler housings.\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes S54, N54, N55\u003cbr\u003eChassis Codes E36, E46\u003cbr\u003eInstall Torque Specs 10 ft\/lbs for Oil Line Fitting Kit bolt\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eOverall Height 1.3\" \u003cbr\u003eOverall Length 2.44\" \u003cbr\u003eOverall Width 1.51\" (assembled) \u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Fitting Clamp \u003cbr\u003e(2) -10AN Fittings \u003cbr\u003e(2) BMW Oil O-rings \u003cbr\u003e(1) M8 x 1.25 x 25mm Button-Head Bolt \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eInstall a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Pair this fitting kit with some Mishimoto stainless steel oil lines and one of our stacked-plate oil coolers to create a complete cooling setup for your BMW. As with all our products, the Mishimoto BMW Oil Line Fitting Kit includes our Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Allows for use of -10AN fittings for custom\u003cbr\u003e100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate\u003cbr\u003eIncludes durable stock\u003cbr\u003eBMW O-rings for leak-free installation\u003cbr\u003eProvides additional engine bay space for applications with an oil accumulator or supercharger setup\u003cbr\u003eIncluded as part of the Mishimoto BMW E46 M3 Oil Cooler Kit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial \u003cbr\u003eFITTING CLAMP MATERIAL\u003cbr\u003e303 Stainless Steel\u003cbr\u003e\u003cbr\u003e-10AN FITTINGS MATERIAL\u003cbr\u003e6061 Aluminum\u003cbr\u003e\u003cbr\u003eNote This kit works with vehicles which have stock oil cooler housings.\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes S54, N54, N55\u003cbr\u003eChassis Codes E36, E46\u003cbr\u003eInstall Torque Specs 10 ft\/lbs for Oil Line Fitting Kit bolt\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eOverall Height 1.3\" \u003cbr\u003eOverall Length 2.44\" \u003cbr\u003eOverall Width 1.51\" (assembled) \u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Fitting Clamp \u003cbr\u003e(2) -10AN Fittings \u003cbr\u003e(2) BMW Oil O-rings \u003cbr\u003e(1) M8 x 1.25 x 25mm Button-Head Bolt \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eInstall a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Pair this fitting kit with some Mishimoto stainless steel oil lines and one of our stacked-plate oil coolers to create a complete cooling setup for your BMW. As with all our products, the Mishimoto BMW Oil Line Fitting Kit includes our Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:25:09+08:00","created_at":"2018-01-24T23:25:09+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["1-series-e82-2007-2013-tc-i6","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","3-series-cabriolet-e93-2004-2011-na-i6","3-series-cabriolet-e93-2007-2013-tc-i6","3-series-coupe-e92-2004-2011-na-i6","3-series-coupe-e92-2007-2013-tc-i6","3-series-e90-2004-2011-na-i6","3-series-e90-2007-2013-tc-i6","98x27.4y1z0","bmw","car-specific","cooling","CTOT14","mishimoto","oil-cooler-accessories","oil-coolers","US1","ws112"],"price":11904,"price_min":11904,"price_max":11904,"available":true,"price_varies":false,"compare_at_price":12800,"compare_at_price_min":12800,"compare_at_price_max":12800,"compare_at_price_varies":false,"variants":[{"id":5990389317659,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOCF-BMW","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Mishimoto BMW E36 E46 Oil Line Fitting Kit - E36 E46 - MMOCF-BMW","public_title":null,"options":["Default Title"],"price":11904,"weight":4181,"compare_at_price":12800,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOCF-BMW_dc87dcb0-50fa-432d-a3a6-4835b75229d0.jpg?v=1710154108"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOCF-BMW_dc87dcb0-50fa-432d-a3a6-4835b75229d0.jpg?v=1710154108","options":["Title"],"media":[{"alt":"Mishimoto - Mishimoto BMW E36 E46 Oil Line Fitting Kit - E36 E46 - MMOCF-BMW - Rzcrewgarage","id":1351401635937,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOCF-BMW_dc87dcb0-50fa-432d-a3a6-4835b75229d0.jpg?v=1710154108"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOCF-BMW_dc87dcb0-50fa-432d-a3a6-4835b75229d0.jpg?v=1710154108","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOCF-BMW\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Allows for use of -10AN fittings for custom\u003cbr\u003e100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate\u003cbr\u003eIncludes durable stock\u003cbr\u003eBMW O-rings for leak-free installation\u003cbr\u003eProvides additional engine bay space for applications with an oil accumulator or supercharger setup\u003cbr\u003eIncluded as part of the Mishimoto BMW E46 M3 Oil Cooler Kit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial \u003cbr\u003eFITTING CLAMP MATERIAL\u003cbr\u003e303 Stainless Steel\u003cbr\u003e\u003cbr\u003e-10AN FITTINGS MATERIAL\u003cbr\u003e6061 Aluminum\u003cbr\u003e\u003cbr\u003eNote This kit works with vehicles which have stock oil cooler housings.\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes S54, N54, N55\u003cbr\u003eChassis Codes E36, E46\u003cbr\u003eInstall Torque Specs 10 ft\/lbs for Oil Line Fitting Kit bolt\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eOverall Height 1.3\" \u003cbr\u003eOverall Length 2.44\" \u003cbr\u003eOverall Width 1.51\" (assembled) \u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Fitting Clamp \u003cbr\u003e(2) -10AN Fittings \u003cbr\u003e(2) BMW Oil O-rings \u003cbr\u003e(1) M8 x 1.25 x 25mm Button-Head Bolt \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eInstall a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Pair this fitting kit with some Mishimoto stainless steel oil lines and one of our stacked-plate oil coolers to create a complete cooling setup for your BMW. As with all our products, the Mishimoto BMW Oil Line Fitting Kit includes our Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Allows for use of -10AN fittings for custom\u003cbr\u003e100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate\u003cbr\u003eIncludes durable stock\u003cbr\u003eBMW O-rings for leak-free installation\u003cbr\u003eProvides additional engine bay space for applications with an oil accumulator or supercharger setup\u003cbr\u003eIncluded as part of the Mishimoto BMW E46 M3 Oil Cooler Kit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial \u003cbr\u003eFITTING CLAMP MATERIAL\u003cbr\u003e303 Stainless Steel\u003cbr\u003e\u003cbr\u003e-10AN FITTINGS MATERIAL\u003cbr\u003e6061 Aluminum\u003cbr\u003e\u003cbr\u003eNote This kit works with vehicles which have stock oil cooler housings.\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes S54, N54, N55\u003cbr\u003eChassis Codes E36, E46\u003cbr\u003eInstall Torque Specs 10 ft\/lbs for Oil Line Fitting Kit bolt\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eOverall Height 1.3\" \u003cbr\u003eOverall Length 2.44\" \u003cbr\u003eOverall Width 1.51\" (assembled) \u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Fitting Clamp \u003cbr\u003e(2) -10AN Fittings \u003cbr\u003e(2) BMW Oil O-rings \u003cbr\u003e(1) M8 x 1.25 x 25mm Button-Head Bolt \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eInstall a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Pair this fitting kit with some Mishimoto stainless steel oil lines and one of our stacked-plate oil coolers to create a complete cooling setup for your BMW. As with all our products, the Mishimoto BMW Oil Line Fitting Kit includes our Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":1416426618977,"title":"Billion - Super Thermo Low Temp Thermostat (68 Deg C) - Nissan - VQ(HR) Engine","handle":"billion-super-thermo-low-temp-thermostat-68-deg-c-nissan-vqhr-engine-bsn-05","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Billion\u003cbr\u003ePart Number: BSN-05\u003cbr\u003eOpening temperature: 68 Deg C\u003cbr\u003e\u003cbr\u003eThis is a drop-in direct replacement for your OEM unit and will increase the vehicles cooling ability by opening at a lower temperature. An essential part for improving cooling performance.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eFairlady Z Roadster | HZ33 Zenki | 2003-2004 | NA | VQ35HR | V6\u003cbr\u003eFairlady Z Roadster | HZ33 Chuki Pre FL | 2004-2005 | NA | VQ35HR | V6\u003cbr\u003eFairlady Z Roadster | HZ33 Chuki Aft FL | 2005-2007 | NA | VQ35HR | V6\u003cbr\u003eFairlady Z Roadster | HZ33 Kouki | 2007-2008 | NA | VQ35HR | V6\u003cbr\u003eFairlady Z | Z33 Kouki | 2007-2008 | NA | VQ35HR | V6\u003cbr\u003eFairlady Z | Z34 Zenki | 2008-2012 | NA | VQ37VHR | V6\u003cbr\u003eFairlady Z | Z34 Kouki | 2012-2018 | NA | VQ37VHR | V6\u003cbr\u003e\u003cbr\u003eLevin Trueno | AE86 | 1983-1987 | NA | 4A-GE 16v | I4\u003cbr\u003eLevin Trueno | AE86 | 1983-1987 | NA | 4A-GE 16v | I4\u003cbr\u003e\u003c!--split--\u003eFairlady Z Roadster | HZ33 Zenki | 2003-2004 | NA | VQ35HR | V6\u003cbr\u003eFairlady Z Roadster | HZ33 Chuki Pre FL | 2004-2005 | NA | VQ35HR | V6\u003cbr\u003eFairlady Z Roadster | HZ33 Chuki Aft FL | 2005-2007 | NA | VQ35HR | V6\u003cbr\u003eFairlady Z Roadster | HZ33 Kouki | 2007-2008 | NA | VQ35HR | V6\u003cbr\u003eFairlady Z | Z33 Kouki | 2007-2008 | NA | VQ35HR | V6\u003cbr\u003eFairlady Z | Z34 Zenki | 2008-2012 | NA | VQ37VHR | V6\u003cbr\u003eFairlady Z | Z34 Kouki | 2012-2018 | NA | VQ37VHR | V6\u003cbr\u003e\u003cbr\u003eLevin Trueno | AE86 | 1983-1987 | NA | 4A-GE 16v | I4\u003cbr\u003eLevin Trueno | AE86 | 1983-1987 | NA | 4A-GE 16v | I4\u003cbr\u003e\u003cbr\u003e","published_at":"2018-08-17T17:28:55+08:00","created_at":"2018-08-17T17:28:55+08:00","vendor":"Billion","type":"Thermostats","tags":["15000x20y1.1z1000","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","billion","cooling","CTA210","fairlady-z-roadster-hz33-chuki-aft-fl-2005-2007-na-vq35hr-v6","fairlady-z-roadster-hz33-chuki-pre-fl-2004-2005-na-vq35hr-v6","fairlady-z-roadster-hz33-kouki-2007-2008-na-vq35hr-v6","fairlady-z-roadster-hz33-zenki-2003-2004-na-vq35hr-v6","JP1","nissan","thermostats","ws113"],"price":14352,"price_min":14352,"price_max":14352,"available":true,"price_varies":false,"compare_at_price":15600,"compare_at_price_min":15600,"compare_at_price_max":15600,"compare_at_price_varies":false,"variants":[{"id":12398196686945,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BSN-05","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Billion - Super Thermo Low Temp Thermostat (68 Deg C) - Nissan - VQ(HR) Engine","public_title":null,"options":["Default Title"],"price":14352,"weight":1000,"compare_at_price":15600,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Billion_Super_Thermo_Thermostat_d6451ddd-b1ca-4365-adcc-a7c60475be6e.jpg?v=1710157727"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Billion_Super_Thermo_Thermostat_d6451ddd-b1ca-4365-adcc-a7c60475be6e.jpg?v=1710157727","options":["Title"],"media":[{"alt":"Billion - Super Thermo Low Temp Thermostat (68 Deg C) - Nissan - VQ(HR) Engine - BSN-05 - RZCREWGARAGE","id":26388487438518,"position":1,"preview_image":{"aspect_ratio":1.333,"height":600,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Billion_Super_Thermo_Thermostat_d6451ddd-b1ca-4365-adcc-a7c60475be6e.jpg?v=1710157727"},"aspect_ratio":1.333,"height":600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Billion_Super_Thermo_Thermostat_d6451ddd-b1ca-4365-adcc-a7c60475be6e.jpg?v=1710157727","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Billion\u003cbr\u003ePart Number: BSN-05\u003cbr\u003eOpening temperature: 68 Deg C\u003cbr\u003e\u003cbr\u003eThis is a drop-in direct replacement for your OEM unit and will increase the vehicles cooling ability by opening at a lower temperature. An essential part for improving cooling performance.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eFairlady Z Roadster | HZ33 Zenki | 2003-2004 | NA | VQ35HR | V6\u003cbr\u003eFairlady Z Roadster | HZ33 Chuki Pre FL | 2004-2005 | NA | VQ35HR | V6\u003cbr\u003eFairlady Z Roadster | HZ33 Chuki Aft FL | 2005-2007 | NA | VQ35HR | V6\u003cbr\u003eFairlady Z Roadster | HZ33 Kouki | 2007-2008 | NA | VQ35HR | V6\u003cbr\u003eFairlady Z | Z33 Kouki | 2007-2008 | NA | VQ35HR | V6\u003cbr\u003eFairlady Z | Z34 Zenki | 2008-2012 | NA | VQ37VHR | V6\u003cbr\u003eFairlady Z | Z34 Kouki | 2012-2018 | NA | VQ37VHR | V6\u003cbr\u003e\u003cbr\u003eLevin Trueno | AE86 | 1983-1987 | NA | 4A-GE 16v | I4\u003cbr\u003eLevin Trueno | AE86 | 1983-1987 | NA | 4A-GE 16v | I4\u003cbr\u003e\u003c!--split--\u003eFairlady Z Roadster | HZ33 Zenki | 2003-2004 | NA | VQ35HR | V6\u003cbr\u003eFairlady Z Roadster | HZ33 Chuki Pre FL | 2004-2005 | NA | VQ35HR | V6\u003cbr\u003eFairlady Z Roadster | HZ33 Chuki Aft FL | 2005-2007 | NA | VQ35HR | V6\u003cbr\u003eFairlady Z Roadster | HZ33 Kouki | 2007-2008 | NA | VQ35HR | V6\u003cbr\u003eFairlady Z | Z33 Kouki | 2007-2008 | NA | VQ35HR | V6\u003cbr\u003eFairlady Z | Z34 Zenki | 2008-2012 | NA | VQ37VHR | V6\u003cbr\u003eFairlady Z | Z34 Kouki | 2012-2018 | NA | VQ37VHR | V6\u003cbr\u003e\u003cbr\u003eLevin Trueno | AE86 | 1983-1987 | NA | 4A-GE 16v | I4\u003cbr\u003eLevin Trueno | AE86 | 1983-1987 | NA | 4A-GE 16v | I4\u003cbr\u003e\u003cbr\u003e"}

{"id":2095451373665,"title":"Samco Japan - 2 Pcs Cooling Hoses Set Radiator - Nissan - March AK12","handle":"samco-japan-2-pcs-cooling-hoses-set-radiator-nissan-march-ak12-40tcs240-c","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Samco Japan\u003cbr\u003ePart Number: 40TCS240\/C\u003cbr\u003eHose Type: Cooling Hoses\u003cbr\u003eHose Numbers per set: 2\u003cbr\u003eHose Colour (Please leave us a note during checkout): Standard color:\tBlue \/ Red \/ Black \/ Green \/ Yellow \/ Orange\u003cbr\u003e\u003cbr\u003eSamco is the leader in the Cooling hose system for a reason. Their Unique 3 to 5 plies design ensure long lasting qualities to any type of usages: Boost, Cooling, Fueling. Their design is composed of:\u003cbr\u003eOuter surface coating to resist extreem deterioration to heat or cold.\u003cbr\u003eUnique 3 to 5 plies lamination superposing original silicone material and aramid fiber on 3 to 5 layers depending on the item and hose diameter, the strength exceeds by far any OEM units.\nThe 5 kg \/ cm2 normal maximum pressure resistance (in the case of inner diameter 25 mm) prevents hose expansion and \nburst.\u003cbr\u003ePrecise and carefully hand-made construction creates an extremely flat inner surface, completely eliminating stress on the fluid . In addition, \nall sections are covered by adopting suitable treatment for applications such as oil, fuel, heat resistance.\u003cbr\u003e\u003cbr\u003ePlease note that all Hoses from Samco are made to order: allow 6 to 8 weeks lead time. Colour are customisable on order, let us know during checkout in the notes. All Samco Hoses sold on our website are garantied original and follow their strict warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMarch | AK12 | 2002-2004 | NA | CR12DE | I4\u003cbr\u003eMarch | AK12 | 2004-2005 | NA | CR12DE | I4\u003cbr\u003eMarch | AK12 | 2005-2007 | NA | CR12DE | I4\u003cbr\u003eMarch | AK12 | 2007-2010 | NA | CR12DE | I4\u003c!--split--\u003e","published_at":"2019-04-26T16:18:10+08:00","created_at":"2019-04-26T16:18:10+08:00","vendor":"Samco Japan","type":"Cooling Hoses","tags":["19000x20y1.1z1000","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","cooling","cooling-hoses","coolinghoses","CTA206","JP1","march-ak12-2002-2004-na-cr12de-i4","march-ak12-2004-2005-na-cr12de-i4","march-ak12-2005-2007-na-cr12de-i4","march-ak12-2007-2010-na-cr12de-i4","new","nissan","samco-japan","ws117"],"price":17424,"price_min":17424,"price_max":17424,"available":true,"price_varies":false,"compare_at_price":19800,"compare_at_price_min":19800,"compare_at_price_max":19800,"compare_at_price_varies":false,"variants":[{"id":19755637735521,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"40TCS240\/C","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Samco Japan - 2 Pcs Cooling Hoses Set Radiator - Nissan - March AK12","public_title":null,"options":["Default Title"],"price":17424,"weight":6000,"compare_at_price":19800,"inventory_quantity":46,"inventory_management":"shopify","inventory_policy":"deny","barcode":"40TCS240C","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_2_hoses_radiator_kit_64fc61ff-0010-4d5b-82f6-c8f8e60b0266.jpg?v=1710179404"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_2_hoses_radiator_kit_64fc61ff-0010-4d5b-82f6-c8f8e60b0266.jpg?v=1710179404","options":["Title"],"media":[{"alt":"Samco Japan - 2 Pcs Cooling Hoses Set Radiator - Nissan - March AK12 - 40TCS240\/C - RZCREWGARAGE","id":26388476068022,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_2_hoses_radiator_kit_64fc61ff-0010-4d5b-82f6-c8f8e60b0266.jpg?v=1710179404"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_2_hoses_radiator_kit_64fc61ff-0010-4d5b-82f6-c8f8e60b0266.jpg?v=1710179404","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Samco Japan\u003cbr\u003ePart Number: 40TCS240\/C\u003cbr\u003eHose Type: Cooling Hoses\u003cbr\u003eHose Numbers per set: 2\u003cbr\u003eHose Colour (Please leave us a note during checkout): Standard color:\tBlue \/ Red \/ Black \/ Green \/ Yellow \/ Orange\u003cbr\u003e\u003cbr\u003eSamco is the leader in the Cooling hose system for a reason. Their Unique 3 to 5 plies design ensure long lasting qualities to any type of usages: Boost, Cooling, Fueling. Their design is composed of:\u003cbr\u003eOuter surface coating to resist extreem deterioration to heat or cold.\u003cbr\u003eUnique 3 to 5 plies lamination superposing original silicone material and aramid fiber on 3 to 5 layers depending on the item and hose diameter, the strength exceeds by far any OEM units.\nThe 5 kg \/ cm2 normal maximum pressure resistance (in the case of inner diameter 25 mm) prevents hose expansion and \nburst.\u003cbr\u003ePrecise and carefully hand-made construction creates an extremely flat inner surface, completely eliminating stress on the fluid . In addition, \nall sections are covered by adopting suitable treatment for applications such as oil, fuel, heat resistance.\u003cbr\u003e\u003cbr\u003ePlease note that all Hoses from Samco are made to order: allow 6 to 8 weeks lead time. Colour are customisable on order, let us know during checkout in the notes. All Samco Hoses sold on our website are garantied original and follow their strict warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMarch | AK12 | 2002-2004 | NA | CR12DE | I4\u003cbr\u003eMarch | AK12 | 2004-2005 | NA | CR12DE | I4\u003cbr\u003eMarch | AK12 | 2005-2007 | NA | CR12DE | I4\u003cbr\u003eMarch | AK12 | 2007-2010 | NA | CR12DE | I4\u003c!--split--\u003e"}

{"id":380978921499,"title":"Sard Radiator Hoses set - Mazda - RX-8 SE3P 13B-MSP","handle":"sard-radiator-hoses-set-mazda-rx-8-se3p-13b-msp-79580","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Sard\u003cbr\u003ePart Number: 79580\u003cbr\u003eHose Type: Water Hoses\u003cbr\u003e\u003cbr\u003eThe SARD Radiator Hoses are made from pressure-tight 3 ply structure for a better resistance to heat and decay. This price is for a set of 2 Sard Hoses ( Return and feed line)\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eRX-8 | SE3P Zenki | 2003-2008 | NA | 13B-MSP | R\u003cbr\u003eRX-8 | SE3P Kouki | 2008-2013 | NA | 13B-MSP | R\u003c!--split--\u003e","published_at":"2023-05-16T13:12:50+08:00","created_at":"2017-11-28T23:37:46+08:00","vendor":"Sard","type":"Cooling Hoses","tags":["20000x22y1z1000","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","cooling","cooling-hoses","coolinghoses","CTA207","JP1","mazda","rx-8-se3p-kouki-2008-2013-na-13b-msp-r","rx-8-se3p-zenki-2003-2008-na-13b-msp-r","sard","ws19"],"price":18144,"price_min":18144,"price_max":18144,"available":true,"price_varies":false,"compare_at_price":18900,"compare_at_price_min":18900,"compare_at_price_max":18900,"compare_at_price_varies":false,"variants":[{"id":4857927270427,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"79580","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Sard Radiator Hoses set - Mazda - RX-8 SE3P 13B-MSP","public_title":null,"options":["Default Title"],"price":18144,"weight":6000,"compare_at_price":18900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Sard_hose_76fc999d-d962-48b6-9bee-d277e7b812f6.jpg?v=1710146219"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Sard_hose_76fc999d-d962-48b6-9bee-d277e7b812f6.jpg?v=1710146219","options":["Title"],"media":[{"alt":"Sard Radiator Hoses set - Mazda - RX-8 SE3P 13B-MSP - 79580 - RZCREWGARAGE","id":26388480721078,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Sard_hose_76fc999d-d962-48b6-9bee-d277e7b812f6.jpg?v=1710146219"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Sard_hose_76fc999d-d962-48b6-9bee-d277e7b812f6.jpg?v=1710146219","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Sard\u003cbr\u003ePart Number: 79580\u003cbr\u003eHose Type: Water Hoses\u003cbr\u003e\u003cbr\u003eThe SARD Radiator Hoses are made from pressure-tight 3 ply structure for a better resistance to heat and decay. This price is for a set of 2 Sard Hoses ( Return and feed line)\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eRX-8 | SE3P Zenki | 2003-2008 | NA | 13B-MSP | R\u003cbr\u003eRX-8 | SE3P Kouki | 2008-2013 | NA | 13B-MSP | R\u003c!--split--\u003e"}

{"id":380979216411,"title":"Sard Radiator Hoses set - Suzuki - Swift ZC31S M16A","handle":"sard-radiator-hoses-set-suzuki-swift-zc31s-m16a-79590","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Sard\u003cbr\u003ePart Number: 79590\u003cbr\u003eHose Type: Water Hoses\u003cbr\u003e\u003cbr\u003eThe SARD Radiator Hoses are made from pressure-tight 3 ply structure for a better resistance to heat and decay. This price is for a set of 2 Sard Hoses ( Return and feed line)\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC31S | 2004-2010 | NA | M16A | I4\u003c!--split--\u003e","published_at":"2017-11-28T23:37:49+08:00","created_at":"2017-11-28T23:37:49+08:00","vendor":"Sard","type":"Cooling Hoses","tags":["20000x22y1z1000","2004","2005","2006","2007","2008","2009","2010","cooling","cooling-hoses","coolinghoses","CTA207","JP1","sard","suzuki","swift-sport-zc31s-2004-2010-na-m16a-i4","ws19"],"price":18144,"price_min":18144,"price_max":18144,"available":true,"price_varies":false,"compare_at_price":18900,"compare_at_price_min":18900,"compare_at_price_max":18900,"compare_at_price_varies":false,"variants":[{"id":4857927696411,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"79590","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Sard Radiator Hoses set - Suzuki - Swift ZC31S M16A","public_title":null,"options":["Default Title"],"price":18144,"weight":6000,"compare_at_price":18900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Sard_hose_a165f1c6-f876-45b7-9f2c-6843c2b884a8.jpg?v=1710146224"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Sard_hose_a165f1c6-f876-45b7-9f2c-6843c2b884a8.jpg?v=1710146224","options":["Title"],"media":[{"alt":"Sard Radiator Hoses set - Suzuki - Swift ZC31S M16A - 79590 - RZCREWGARAGE","id":26388481179830,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Sard_hose_a165f1c6-f876-45b7-9f2c-6843c2b884a8.jpg?v=1710146224"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Sard_hose_a165f1c6-f876-45b7-9f2c-6843c2b884a8.jpg?v=1710146224","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Sard\u003cbr\u003ePart Number: 79590\u003cbr\u003eHose Type: Water Hoses\u003cbr\u003e\u003cbr\u003eThe SARD Radiator Hoses are made from pressure-tight 3 ply structure for a better resistance to heat and decay. This price is for a set of 2 Sard Hoses ( Return and feed line)\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC31S | 2004-2010 | NA | M16A | I4\u003c!--split--\u003e"}

{"id":7606808412342,"title":"Mishimoto - Mazda RX-8 Silicone Radiator Hose Kit - Black - SE3P - MMHOSE-RX8-03BK","handle":"mishimoto-mazda-rx-8-silicone-radiator-hose-kit-black-se3p-mmhose-rx8-03bk","description":null,"published_at":"2023-07-18T09:26:36+08:00","created_at":"2023-06-08T11:31:53+08:00","vendor":"Mishimoto","type":"Cooling Hoses","tags":["155x27.3y1z0","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","cooling","cooling-hoses","CTOT14","mazda","mishimoto","radiator-hose-kits","rx-8-se3p-kouki-2008-2013-na-13b-msp-r","rx-8-se3p-zenki-2003-2008-na-13b-msp-r","US1","ws111"],"price":18988,"price_min":18988,"price_max":18988,"available":true,"price_varies":false,"compare_at_price":20200,"compare_at_price_min":20200,"compare_at_price_max":20200,"compare_at_price_varies":false,"variants":[{"id":42261633826998,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-RX8-03BK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Mazda RX-8 Silicone Radiator Hose Kit - Black - SE3P - MMHOSE-RX8-03BK","public_title":null,"options":["Default Title"],"price":18988,"weight":4726,"compare_at_price":20200,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":[],"featured_image":null,"options":["Title"],"requires_selling_plan":false,"selling_plan_groups":[],"content":null}

{"id":7596148162742,"title":"Mishimoto - Silicone Hose Kit - Mazda - RX-8 SE3P","handle":"mishimoto-silicone-hose-kit-mazda-rx-8-se3p","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-RX8-03BK\u003cbr\u003eHose Type: Water Hoses\u003cbr\u003e\u003cbr\u003eThe Mishimoto Silicone Ancillary Hose Kit for the 2015+ Subaru WRX is designed to improve the reliability of your vehicle and eliminate weak points found with the factory rubber hoses. We have carefully selected 13 hoses, both PCV and coolant lines, which we found can easily be replaced and benefit from the use of silicone. Mishimoto silicone hoses are crafted from four layers of silicone with heat-resistant embedded fibers to provide improved pressure and heat tolerance. PCV lines are commonly exposed to fine particles of oil which, over time, degrade the rubber and lead to eventual failure. Mishimoto silicone hoses have substantially greater resilience to these particles, providing a hose that will endure the test of time. Each hose included in this kit is designed with factory specifications in mind, resulting in a direct-fit replacement that is easy to install. This kit is available in black, blue, and red and includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship. \n * \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 1 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eRX-8 | SE3P Zenki | 2003-2008 | NA | 13B-MSP | R\u003cbr\u003eRX-8 | SE3P Kouki | 2008-2013 | NA | 13B-MSP | R\u003c!--split--\u003e","published_at":"2023-05-15T16:25:40+08:00","created_at":"2023-05-15T16:10:57+08:00","vendor":"Mishimoto","type":"Cooling Hoses","tags":["191.1x50y1z0","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","cooling","cooling-hoses","coolinghoses","CTOUS1","mazda","mishimoto","rx-8-se3p-kouki-2008-2013-na-13b-msp-r","rx-8-se3p-zenki-2003-2008-na-13b-msp-r","US1","ws122"],"price":20501,"price_min":20501,"price_max":20501,"available":true,"price_varies":false,"compare_at_price":24700,"compare_at_price_min":24700,"compare_at_price_max":24700,"compare_at_price_varies":false,"variants":[{"id":42235073626294,"title":"Black","option1":"Black","option2":null,"option3":null,"sku":"MMHOSE-RX8-03BK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Silicone Hose Kit - Mazda - RX-8 SE3P - Black","public_title":"Black","options":["Black"],"price":20501,"weight":4000,"compare_at_price":24700,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42235073659062,"title":"Blue","option1":"Blue","option2":null,"option3":null,"sku":"MMHOSE-RX8-03BL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Silicone Hose Kit - Mazda - RX-8 SE3P - Blue","public_title":"Blue","options":["Blue"],"price":20501,"weight":4000,"compare_at_price":24700,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42235073691830,"title":"Red","option1":"Red","option2":null,"option3":null,"sku":"MMHOSE-RX8-03RD","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Silicone Hose Kit - Mazda - RX-8 SE3P - Red","public_title":"Red","options":["Red"],"price":20501,"weight":4000,"compare_at_price":24700,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/mishimoto-silicone-hose-kit-mazda-rx-8-se3p-rzcrew-1.jpg?v=1710317167","\/\/rzcrewgarage.com\/cdn\/shop\/products\/mishimoto-silicone-hose-kit-mazda-rx-8-se3p-rzcrew-2.jpg?v=1710317168","\/\/rzcrewgarage.com\/cdn\/shop\/products\/mishimoto-silicone-hose-kit-mazda-rx-8-se3p-rzcrew-3.jpg?v=1710317169"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/mishimoto-silicone-hose-kit-mazda-rx-8-se3p-rzcrew-1.jpg?v=1710317167","options":["Colour"],"media":[{"alt":"Mishimoto - Silicone Hose Kit - Mazda - RX-8 SE3P - RZCREWGARAGE","id":26216919236790,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/mishimoto-silicone-hose-kit-mazda-rx-8-se3p-rzcrew-1.jpg?v=1710317167"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/mishimoto-silicone-hose-kit-mazda-rx-8-se3p-rzcrew-1.jpg?v=1710317167","width":420},{"alt":"Mishimoto - Silicone Hose Kit - Mazda - RX-8 SE3P - RZCREWGARAGE","id":26216919269558,"position":2,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/mishimoto-silicone-hose-kit-mazda-rx-8-se3p-rzcrew-2.jpg?v=1710317168"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/mishimoto-silicone-hose-kit-mazda-rx-8-se3p-rzcrew-2.jpg?v=1710317168","width":420},{"alt":"Mishimoto - Silicone Hose Kit - Mazda - RX-8 SE3P - RZCREWGARAGE","id":26216919302326,"position":3,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/mishimoto-silicone-hose-kit-mazda-rx-8-se3p-rzcrew-3.jpg?v=1710317169"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/mishimoto-silicone-hose-kit-mazda-rx-8-se3p-rzcrew-3.jpg?v=1710317169","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-RX8-03BK\u003cbr\u003eHose Type: Water Hoses\u003cbr\u003e\u003cbr\u003eThe Mishimoto Silicone Ancillary Hose Kit for the 2015+ Subaru WRX is designed to improve the reliability of your vehicle and eliminate weak points found with the factory rubber hoses. We have carefully selected 13 hoses, both PCV and coolant lines, which we found can easily be replaced and benefit from the use of silicone. Mishimoto silicone hoses are crafted from four layers of silicone with heat-resistant embedded fibers to provide improved pressure and heat tolerance. PCV lines are commonly exposed to fine particles of oil which, over time, degrade the rubber and lead to eventual failure. Mishimoto silicone hoses have substantially greater resilience to these particles, providing a hose that will endure the test of time. Each hose included in this kit is designed with factory specifications in mind, resulting in a direct-fit replacement that is easy to install. This kit is available in black, blue, and red and includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship. \n * \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 1 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eRX-8 | SE3P Zenki | 2003-2008 | NA | 13B-MSP | R\u003cbr\u003eRX-8 | SE3P Kouki | 2008-2013 | NA | 13B-MSP | R\u003c!--split--\u003e"}

{"id":380970795035,"title":"Sard Dual Core Radiator - Mazda - RX-8 SE3P (MT)","handle":"sard-dual-core-radiator-mazda-rx-8-se3p-mt-35865","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Sard\u003cbr\u003ePart Number: 35865\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003eRadiator Cap included (unless the stock radiator design does not have the cap on the radiator itself)\u003cbr\u003e\u003cbr\u003eSard Racing company is an arm of Sard Japan manufacturing aluminum radiator at an affordable price.\u003cbr\u003e\nThis radiator is a Full aluminium unit to help in cooling down your engine in any occasion. With its full polished body and Sard embossed logo it ensures the perfect look and efficiency in your engine bay. These radiators fit the stock fan mounting points. Slim fans are available in the shop.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eRX-8 | SE3P Zenki | 2003-2008 | NA | 13B-MSP | R\u003cbr\u003eRX-8 | SE3P Kouki | 2008-2013 | NA | 13B-MSP | R\u003c!--split--\u003e","published_at":"2017-11-28T23:35:30+08:00","created_at":"2017-11-28T23:35:30+08:00","vendor":"Sard","type":"Radiators","tags":["2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","415x0y2.35z190","cooling","mazda","mt","radiators","rx-8-se3p-kouki-2008-2013-na-13b-msp-r","rx-8-se3p-zenki-2003-2008-na-13b-msp-r","sard","SG1","SPE205","ws130"],"price":22800,"price_min":22800,"price_max":22800,"available":true,"price_varies":false,"compare_at_price":30400,"compare_at_price_min":30400,"compare_at_price_max":30400,"compare_at_price_varies":false,"variants":[{"id":4857899941915,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"35865","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Sard Dual Core Radiator - Mazda - RX-8 SE3P (MT)","public_title":null,"options":["Default Title"],"price":22800,"weight":19000,"compare_at_price":30400,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SARD_radiator_1_55f3dbe1-1ef3-44f5-a545-c721003341be.jpg?v=1710146070"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SARD_radiator_1_55f3dbe1-1ef3-44f5-a545-c721003341be.jpg?v=1710146070","options":["Title"],"media":[{"alt":"Sard Dual Core Radiator - Mazda - RX-8 SE3P (MT) - 35865 - RZCREWGARAGE","id":25435276345526,"position":1,"preview_image":{"aspect_ratio":1.509,"height":795,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SARD_radiator_1_55f3dbe1-1ef3-44f5-a545-c721003341be.jpg?v=1710146070"},"aspect_ratio":1.509,"height":795,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SARD_radiator_1_55f3dbe1-1ef3-44f5-a545-c721003341be.jpg?v=1710146070","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Sard\u003cbr\u003ePart Number: 35865\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003eRadiator Cap included (unless the stock radiator design does not have the cap on the radiator itself)\u003cbr\u003e\u003cbr\u003eSard Racing company is an arm of Sard Japan manufacturing aluminum radiator at an affordable price.\u003cbr\u003e\nThis radiator is a Full aluminium unit to help in cooling down your engine in any occasion. With its full polished body and Sard embossed logo it ensures the perfect look and efficiency in your engine bay. These radiators fit the stock fan mounting points. Slim fans are available in the shop.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eRX-8 | SE3P Zenki | 2003-2008 | NA | 13B-MSP | R\u003cbr\u003eRX-8 | SE3P Kouki | 2008-2013 | NA | 13B-MSP | R\u003c!--split--\u003e"}

{"id":2095454158945,"title":"Samco Japan - 3 Pcs Cooling Hoses Set Radiator - Toyota - Vitz NCP91","handle":"samco-japan-3-pcs-cooling-hoses-set-radiator-toyota-vitz-ncp91-40tcs335-c","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Samco Japan\u003cbr\u003ePart Number: 40TCS335\/C\u003cbr\u003eHose Type: Cooling Hoses\u003cbr\u003eHose Numbers per set: 3\u003cbr\u003eHose Colour (Please leave us a note during checkout): Standard color:\tBlue \/ Red \/ Black \/ Green \/ Yellow \/ Orange\u003cbr\u003e\u003cbr\u003eSamco is the leader in the Cooling hose system for a reason. Their Unique 3 to 5 plies design ensure long lasting qualities to any type of usages: Boost, Cooling, Fueling. Their design is composed of:\u003cbr\u003eOuter surface coating to resist extreem deterioration to heat or cold.\u003cbr\u003eUnique 3 to 5 plies lamination superposing original silicone material and aramid fiber on 3 to 5 layers depending on the item and hose diameter, the strength exceeds by far any OEM units.\nThe 5 kg \/ cm2 normal maximum pressure resistance (in the case of inner diameter 25 mm) prevents hose expansion and \nburst.\u003cbr\u003ePrecise and carefully hand-made construction creates an extremely flat inner surface, completely eliminating stress on the fluid . In addition, \nall sections are covered by adopting suitable treatment for applications such as oil, fuel, heat resistance.\u003cbr\u003e\u003cbr\u003ePlease note that all Hoses from Samco are made to order: allow 6 to 8 weeks lead time. Colour are customisable on order, let us know during checkout in the notes. All Samco Hoses sold on our website are garantied original and follow their strict warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eVitz | NCP91 | 2005-2010 | NA | 1NZ-FE | I4\u003c!--split--\u003e","published_at":"2019-04-26T16:19:22+08:00","created_at":"2019-04-26T16:19:22+08:00","vendor":"Samco Japan","type":"Cooling Hoses","tags":["2005","2006","2007","2008","2009","2010","25000x20y1.1z1000","cooling","cooling-hoses","coolinghoses","CTA206","JP1","new","samco-japan","toyota","vitz-ncp91-2005-2010-na-1nz-fe-i4","ws117"],"price":22880,"price_min":22880,"price_max":22880,"available":true,"price_varies":false,"compare_at_price":26000,"compare_at_price_min":26000,"compare_at_price_max":26000,"compare_at_price_varies":false,"variants":[{"id":19755652841569,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"40TCS335\/C","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Samco Japan - 3 Pcs Cooling Hoses Set Radiator - Toyota - Vitz NCP91","public_title":null,"options":["Default Title"],"price":22880,"weight":6000,"compare_at_price":26000,"inventory_quantity":46,"inventory_management":"shopify","inventory_policy":"deny","barcode":"40TCS335C","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Samco_3_pieces_hose_set_06dfaaa1-bbe2-42ec-b62d-e1e513027768.jpg?v=1710179441"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Samco_3_pieces_hose_set_06dfaaa1-bbe2-42ec-b62d-e1e513027768.jpg?v=1710179441","options":["Title"],"media":[{"alt":"Samco Japan - 3 Pcs Cooling Hoses Set Radiator - Toyota - Vitz NCP91 - 40TCS335\/C - RZCREWGARAGE","id":26388477935798,"position":1,"preview_image":{"aspect_ratio":1.32,"height":325,"width":429,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Samco_3_pieces_hose_set_06dfaaa1-bbe2-42ec-b62d-e1e513027768.jpg?v=1710179441"},"aspect_ratio":1.32,"height":325,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Samco_3_pieces_hose_set_06dfaaa1-bbe2-42ec-b62d-e1e513027768.jpg?v=1710179441","width":429}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Samco Japan\u003cbr\u003ePart Number: 40TCS335\/C\u003cbr\u003eHose Type: Cooling Hoses\u003cbr\u003eHose Numbers per set: 3\u003cbr\u003eHose Colour (Please leave us a note during checkout): Standard color:\tBlue \/ Red \/ Black \/ Green \/ Yellow \/ Orange\u003cbr\u003e\u003cbr\u003eSamco is the leader in the Cooling hose system for a reason. Their Unique 3 to 5 plies design ensure long lasting qualities to any type of usages: Boost, Cooling, Fueling. Their design is composed of:\u003cbr\u003eOuter surface coating to resist extreem deterioration to heat or cold.\u003cbr\u003eUnique 3 to 5 plies lamination superposing original silicone material and aramid fiber on 3 to 5 layers depending on the item and hose diameter, the strength exceeds by far any OEM units.\nThe 5 kg \/ cm2 normal maximum pressure resistance (in the case of inner diameter 25 mm) prevents hose expansion and \nburst.\u003cbr\u003ePrecise and carefully hand-made construction creates an extremely flat inner surface, completely eliminating stress on the fluid . In addition, \nall sections are covered by adopting suitable treatment for applications such as oil, fuel, heat resistance.\u003cbr\u003e\u003cbr\u003ePlease note that all Hoses from Samco are made to order: allow 6 to 8 weeks lead time. Colour are customisable on order, let us know during checkout in the notes. All Samco Hoses sold on our website are garantied original and follow their strict warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eVitz | NCP91 | 2005-2010 | NA | 1NZ-FE | I4\u003c!--split--\u003e"}

{"id":2095447834721,"title":"Samco Japan - 3 Pcs Cooling Hoses Set Radiator - Suzuki - Swift Sport ZC31S","handle":"samco-japan-3-pcs-cooling-hoses-set-radiator-suzuki-swift-sport-zc31s-40tcs347-c","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Samco Japan\u003cbr\u003ePart Number: 40TCS347\/C\u003cbr\u003eHose Type: Cooling Hoses\u003cbr\u003eHose Numbers per set: 3\u003cbr\u003eHose Colour (Please leave us a note during checkout): Standard color:\tBlue \/ Red \/ Black \/ Green \/ Yellow \/ Orange\u003cbr\u003e\u003cbr\u003eSamco is the leader in the Cooling hose system for a reason. Their Unique 3 to 5 plies design ensure long lasting qualities to any type of usages: Boost, Cooling, Fueling. Their design is composed of:\u003cbr\u003eOuter surface coating to resist extreem deterioration to heat or cold.\u003cbr\u003eUnique 3 to 5 plies lamination superposing original silicone material and aramid fiber on 3 to 5 layers depending on the item and hose diameter, the strength exceeds by far any OEM units.\nThe 5 kg \/ cm2 normal maximum pressure resistance (in the case of inner diameter 25 mm) prevents hose expansion and \nburst.\u003cbr\u003ePrecise and carefully hand-made construction creates an extremely flat inner surface, completely eliminating stress on the fluid . In addition, \nall sections are covered by adopting suitable treatment for applications such as oil, fuel, heat resistance.\u003cbr\u003e\u003cbr\u003ePlease note that all Hoses from Samco are made to order: allow 6 to 8 weeks lead time. Colour are customisable on order, let us know during checkout in the notes. All Samco Hoses sold on our website are garantied original and follow their strict warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC31S | 2004-2010 | NA | M16A | I4\u003c!--split--\u003e","published_at":"2019-04-26T16:16:42+08:00","created_at":"2019-04-26T16:16:43+08:00","vendor":"Samco Japan","type":"Cooling Hoses","tags":["2004","2005","2006","2007","2008","2009","2010","27000x20y1.1z1000","cooling","cooling-hoses","coolinghoses","CTA206","JP1","new","samco-japan","suzuki","swift-sport-zc31s-2004-2010-na-m16a-i4","ws118"],"price":24447,"price_min":24447,"price_max":24447,"available":true,"price_varies":false,"compare_at_price":28100,"compare_at_price_min":28100,"compare_at_price_max":28100,"compare_at_price_varies":false,"variants":[{"id":19755618435169,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"40TCS347\/C","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Samco Japan - 3 Pcs Cooling Hoses Set Radiator - Suzuki - Swift Sport ZC31S","public_title":null,"options":["Default Title"],"price":24447,"weight":6000,"compare_at_price":28100,"inventory_quantity":46,"inventory_management":"shopify","inventory_policy":"deny","barcode":"40TCS347C","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Samco_3_pieces_hose_set.jpg?v=1710179363"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Samco_3_pieces_hose_set.jpg?v=1710179363","options":["Title"],"media":[{"alt":"Samco Japan - 3 Pcs Cooling Hoses Set Radiator - Suzuki - Swift Sport ZC31S - 40TCS347\/C - RZCREWGARAGE","id":26388473675958,"position":1,"preview_image":{"aspect_ratio":1.32,"height":325,"width":429,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Samco_3_pieces_hose_set.jpg?v=1710179363"},"aspect_ratio":1.32,"height":325,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Samco_3_pieces_hose_set.jpg?v=1710179363","width":429}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Samco Japan\u003cbr\u003ePart Number: 40TCS347\/C\u003cbr\u003eHose Type: Cooling Hoses\u003cbr\u003eHose Numbers per set: 3\u003cbr\u003eHose Colour (Please leave us a note during checkout): Standard color:\tBlue \/ Red \/ Black \/ Green \/ Yellow \/ Orange\u003cbr\u003e\u003cbr\u003eSamco is the leader in the Cooling hose system for a reason. Their Unique 3 to 5 plies design ensure long lasting qualities to any type of usages: Boost, Cooling, Fueling. Their design is composed of:\u003cbr\u003eOuter surface coating to resist extreem deterioration to heat or cold.\u003cbr\u003eUnique 3 to 5 plies lamination superposing original silicone material and aramid fiber on 3 to 5 layers depending on the item and hose diameter, the strength exceeds by far any OEM units.\nThe 5 kg \/ cm2 normal maximum pressure resistance (in the case of inner diameter 25 mm) prevents hose expansion and \nburst.\u003cbr\u003ePrecise and carefully hand-made construction creates an extremely flat inner surface, completely eliminating stress on the fluid . In addition, \nall sections are covered by adopting suitable treatment for applications such as oil, fuel, heat resistance.\u003cbr\u003e\u003cbr\u003ePlease note that all Hoses from Samco are made to order: allow 6 to 8 weeks lead time. Colour are customisable on order, let us know during checkout in the notes. All Samco Hoses sold on our website are garantied original and follow their strict warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC31S | 2004-2010 | NA | M16A | I4\u003c!--split--\u003e"}

{"id":380970827803,"title":"Sard Dual Core Radiator - Mazda - RX-8 SE3P (AT)","handle":"sard-dual-core-radiator-mazda-rx-8-se3p-at-35866","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Sard\u003cbr\u003ePart Number: 35866\u003cbr\u003eTransmission: AT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003eRadiator Cap included (unless the stock radiator design does not have the cap on the radiator itself)\u003cbr\u003e\u003cbr\u003eSard Racing company is an arm of Sard Japan manufacturing aluminum radiator at an affordable price.\u003cbr\u003e\nThis radiator is a Full aluminium unit to help in cooling down your engine in any occasion. With its full polished body and Sard embossed logo it ensures the perfect look and efficiency in your engine bay. These radiators fit the stock fan mounting points. Slim fans are available in the shop.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eRX-8 | SE3P Zenki | 2003-2008 | NA | 13B-MSP | R\u003cbr\u003eRX-8 | SE3P Kouki | 2008-2013 | NA | 13B-MSP | R\u003c!--split--\u003e","published_at":"2017-11-28T23:35:31+08:00","created_at":"2017-11-28T23:35:32+08:00","vendor":"Sard","type":"Radiators","tags":["2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","455x0y2.35z190","at","cooling","mazda","radiators","rx-8-se3p-kouki-2008-2013-na-13b-msp-r","rx-8-se3p-zenki-2003-2008-na-13b-msp-r","sard","SG1","SPE205","ws130"],"price":25050,"price_min":25050,"price_max":25050,"available":true,"price_varies":false,"compare_at_price":33400,"compare_at_price_min":33400,"compare_at_price_max":33400,"compare_at_price_varies":false,"variants":[{"id":4857900072987,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"35866","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Sard Dual Core Radiator - Mazda - RX-8 SE3P (AT)","public_title":null,"options":["Default Title"],"price":25050,"weight":19000,"compare_at_price":33400,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SARD_radiator_1_b5035bbd-deeb-4220-97d0-e41361ad4805.jpg?v=1710146070"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SARD_radiator_1_b5035bbd-deeb-4220-97d0-e41361ad4805.jpg?v=1710146070","options":["Title"],"media":[{"alt":"Sard Dual Core Radiator - Mazda - RX-8 SE3P (AT) - 35866 - RZCREWGARAGE","id":25435276378294,"position":1,"preview_image":{"aspect_ratio":1.509,"height":795,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SARD_radiator_1_b5035bbd-deeb-4220-97d0-e41361ad4805.jpg?v=1710146070"},"aspect_ratio":1.509,"height":795,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SARD_radiator_1_b5035bbd-deeb-4220-97d0-e41361ad4805.jpg?v=1710146070","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Sard\u003cbr\u003ePart Number: 35866\u003cbr\u003eTransmission: AT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003eRadiator Cap included (unless the stock radiator design does not have the cap on the radiator itself)\u003cbr\u003e\u003cbr\u003eSard Racing company is an arm of Sard Japan manufacturing aluminum radiator at an affordable price.\u003cbr\u003e\nThis radiator is a Full aluminium unit to help in cooling down your engine in any occasion. With its full polished body and Sard embossed logo it ensures the perfect look and efficiency in your engine bay. These radiators fit the stock fan mounting points. Slim fans are available in the shop.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eRX-8 | SE3P Zenki | 2003-2008 | NA | 13B-MSP | R\u003cbr\u003eRX-8 | SE3P Kouki | 2008-2013 | NA | 13B-MSP | R\u003c!--split--\u003e"}

{"id":2095451799649,"title":"Samco Japan - 5 Pcs Cooling Hoses Set Radiator - Honda - Airwave GJ2","handle":"samco-japan-5-pcs-cooling-hoses-set-radiator-honda-airwave-gj2-40tcs588-tpl","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Samco Japan\u003cbr\u003ePart Number: 40TCS588\/TPL\u003cbr\u003eHose Type: Cooling Hoses\u003cbr\u003eHose Numbers per set: 5\u003cbr\u003eHose Colour (Please leave us a note during checkout): Standard color:\tBlue \/ Red \/ Black \/ Green \/ Yellow \/ Orange\u003cbr\u003e\u003cbr\u003eSamco is the leader in the Cooling hose system for a reason. Their Unique 3 to 5 plies design ensure long lasting qualities to any type of usages: Boost, Cooling, Fueling. Their design is composed of:\u003cbr\u003eOuter surface coating to resist extreem deterioration to heat or cold.\u003cbr\u003eUnique 3 to 5 plies lamination superposing original silicone material and aramid fiber on 3 to 5 layers depending on the item and hose diameter, the strength exceeds by far any OEM units.\nThe 5 kg \/ cm2 normal maximum pressure resistance (in the case of inner diameter 25 mm) prevents hose expansion and \nburst.\u003cbr\u003ePrecise and carefully hand-made construction creates an extremely flat inner surface, completely eliminating stress on the fluid . In addition, \nall sections are covered by adopting suitable treatment for applications such as oil, fuel, heat resistance.\u003cbr\u003e\u003cbr\u003ePlease note that all Hoses from Samco are made to order: allow 6 to 8 weeks lead time. Colour are customisable on order, let us know during checkout in the notes. All Samco Hoses sold on our website are garantied original and follow their strict warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eAirwave | GJ2 | 2005-2018 | NA | L15A | I4\u003c!--split--\u003e","published_at":"2019-04-26T16:18:20+08:00","created_at":"2019-04-26T16:18:21+08:00","vendor":"Samco Japan","type":"Cooling Hoses","tags":["2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","28000x20y1.1z1000","airwave-gj2-2005-2018-na-l15a-i4","cooling","cooling-hoses","coolinghoses","CTA206","honda","JP1","new","samco-japan","ws118"],"price":25317,"price_min":25317,"price_max":25317,"available":true,"price_varies":false,"compare_at_price":29100,"compare_at_price_min":29100,"compare_at_price_max":29100,"compare_at_price_varies":false,"variants":[{"id":19755639504993,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"40TCS588\/TPL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Samco Japan - 5 Pcs Cooling Hoses Set Radiator - Honda - Airwave GJ2","public_title":null,"options":["Default Title"],"price":25317,"weight":6000,"compare_at_price":29100,"inventory_quantity":46,"inventory_management":"shopify","inventory_policy":"deny","barcode":"40TCS588TPL","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_5_hoses_radiator_set_e5476278-4f92-4286-a017-683e645fd375.jpg?v=1688967673"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_5_hoses_radiator_set_e5476278-4f92-4286-a017-683e645fd375.jpg?v=1688967673","options":["Title"],"media":[{"alt":"Samco Japan - 5 Pcs Cooling Hoses Set Radiator - Honda - Airwave GJ2 - 40TCS588\/TPL - RZCREWGARAGE","id":26388476428470,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_5_hoses_radiator_set_e5476278-4f92-4286-a017-683e645fd375.jpg?v=1688967673"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_5_hoses_radiator_set_e5476278-4f92-4286-a017-683e645fd375.jpg?v=1688967673","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Samco Japan\u003cbr\u003ePart Number: 40TCS588\/TPL\u003cbr\u003eHose Type: Cooling Hoses\u003cbr\u003eHose Numbers per set: 5\u003cbr\u003eHose Colour (Please leave us a note during checkout): Standard color:\tBlue \/ Red \/ Black \/ Green \/ Yellow \/ Orange\u003cbr\u003e\u003cbr\u003eSamco is the leader in the Cooling hose system for a reason. Their Unique 3 to 5 plies design ensure long lasting qualities to any type of usages: Boost, Cooling, Fueling. Their design is composed of:\u003cbr\u003eOuter surface coating to resist extreem deterioration to heat or cold.\u003cbr\u003eUnique 3 to 5 plies lamination superposing original silicone material and aramid fiber on 3 to 5 layers depending on the item and hose diameter, the strength exceeds by far any OEM units.\nThe 5 kg \/ cm2 normal maximum pressure resistance (in the case of inner diameter 25 mm) prevents hose expansion and \nburst.\u003cbr\u003ePrecise and carefully hand-made construction creates an extremely flat inner surface, completely eliminating stress on the fluid . In addition, \nall sections are covered by adopting suitable treatment for applications such as oil, fuel, heat resistance.\u003cbr\u003e\u003cbr\u003ePlease note that all Hoses from Samco are made to order: allow 6 to 8 weeks lead time. Colour are customisable on order, let us know during checkout in the notes. All Samco Hoses sold on our website are garantied original and follow their strict warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eAirwave | GJ2 | 2005-2018 | NA | L15A | I4\u003c!--split--\u003e"}

{"id":561992204315,"title":"Mishimoto - Mazda RX8 Primary Replacement Oil Line - SE3P - MMSBH-RX8-04","handle":"mishimoto-mazda-rx8-primary-replacement-oil-line-se3p-mmsbh-rx8-04","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMSBH-RX8-04\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct-fit replacement for the 2004–2011 Mazda RX-8\u003cbr\u003ePremade braided stainless steel oil line and aluminum fittings replace corrosion-prone stock rubber line\u003cbr\u003eKit comes with the braided stainless steel line, M18 banjo bolts, and oil seals for a trouble-free installation\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Stainless Steel\u003cbr\u003eMax Recommended PSI 750psi\u003cbr\u003eMin Temp -40°F\u003cbr\u003eNote This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eMax Temp +300°F\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 13B-MSP (Renesis)\u003cbr\u003eChassis Codes SE3P\u003cbr\u003eCaution This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) 2ft, 4in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(2) M18 x -10AN Banjo Bolts w\/ Dowty Oil Seals\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mazda RX-8 has a high-winding rotary engine capable of easily reaching 9,000 RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX-8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine’s oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber RX-8 oil cooler lines and steel fittings can severely corrode and degrade over time. The most frequent RX-8 oil cooler line to corrode is located on the left hand side of the car near the front suspension assembly. The design of the vehicle and location of the line are apt to collect dirt and road salt from winter. With the Mishimoto replacement oil line, not only is this problematic line replaced, it’s replaced with a full braided stainless steel oil line and aluminum M18 to 10AN banjo fittings that will not corrode or break down over time. The Mazda RX-8 oil cooler line fits onto the vehicle with no additional modification, and does not require any cutting to your vehicle or permanent removal of parts. Keep your RX-8 protected and running smooth! As with all our products, this RX-8 oil cooler line includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct-fit replacement for the 2004–2011 Mazda RX-8\u003cbr\u003ePremade braided stainless steel oil line and aluminum fittings replace corrosion-prone stock rubber line\u003cbr\u003eKit comes with the braided stainless steel line, M18 banjo bolts, and oil seals for a trouble-free installation\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Stainless Steel\u003cbr\u003eMax Recommended PSI 750psi\u003cbr\u003eMin Temp -40°F\u003cbr\u003eNote This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eMax Temp +300°F\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 13B-MSP (Renesis)\u003cbr\u003eChassis Codes SE3P\u003cbr\u003eCaution This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) 2ft, 4in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(2) M18 x -10AN Banjo Bolts w\/ Dowty Oil Seals\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mazda RX-8 has a high-winding rotary engine capable of easily reaching 9,000 RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX-8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine’s oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber RX-8 oil cooler lines and steel fittings can severely corrode and degrade over time. The most frequent RX-8 oil cooler line to corrode is located on the left hand side of the car near the front suspension assembly. The design of the vehicle and location of the line are apt to collect dirt and road salt from winter. With the Mishimoto replacement oil line, not only is this problematic line replaced, it’s replaced with a full braided stainless steel oil line and aluminum M18 to 10AN banjo fittings that will not corrode or break down over time. The Mazda RX-8 oil cooler line fits onto the vehicle with no additional modification, and does not require any cutting to your vehicle or permanent removal of parts. Keep your RX-8 protected and running smooth! As with all our products, this RX-8 oil cooler line includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2025-04-14T11:29:21+08:00","created_at":"2018-01-24T23:25:14+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","214x27.1y1z0","car-specific","cooling","CTOT14","mazda","mishimoto","oil-cooler-hoses","oil-coolers","rx-8-se3p-kouki-2008-2013-na-13b-msp-r","rx-8-se3p-zenki-2003-2008-na-13b-msp-r","US1","ws111"],"price":26226,"price_min":26226,"price_max":26226,"available":true,"price_varies":false,"compare_at_price":27900,"compare_at_price_min":27900,"compare_at_price_max":27900,"compare_at_price_varies":false,"variants":[{"id":5990391185435,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMSBH-RX8-04","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Mazda RX8 Primary Replacement Oil Line - SE3P - MMSBH-RX8-04","public_title":null,"options":["Default Title"],"price":26226,"weight":4953,"compare_at_price":27900,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMSBH-RX8-04.jpg?v=1710154111"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMSBH-RX8-04.jpg?v=1710154111","options":["Title"],"media":[{"alt":"Mishimoto - Mazda RX8 Primary Replacement Oil Line - SE3P - MMSBH-RX8-04 - Rzcrewgarage","id":1351401734241,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMSBH-RX8-04.jpg?v=1710154111"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMSBH-RX8-04.jpg?v=1710154111","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMSBH-RX8-04\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct-fit replacement for the 2004–2011 Mazda RX-8\u003cbr\u003ePremade braided stainless steel oil line and aluminum fittings replace corrosion-prone stock rubber line\u003cbr\u003eKit comes with the braided stainless steel line, M18 banjo bolts, and oil seals for a trouble-free installation\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Stainless Steel\u003cbr\u003eMax Recommended PSI 750psi\u003cbr\u003eMin Temp -40°F\u003cbr\u003eNote This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eMax Temp +300°F\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 13B-MSP (Renesis)\u003cbr\u003eChassis Codes SE3P\u003cbr\u003eCaution This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) 2ft, 4in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(2) M18 x -10AN Banjo Bolts w\/ Dowty Oil Seals\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mazda RX-8 has a high-winding rotary engine capable of easily reaching 9,000 RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX-8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine’s oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber RX-8 oil cooler lines and steel fittings can severely corrode and degrade over time. The most frequent RX-8 oil cooler line to corrode is located on the left hand side of the car near the front suspension assembly. The design of the vehicle and location of the line are apt to collect dirt and road salt from winter. With the Mishimoto replacement oil line, not only is this problematic line replaced, it’s replaced with a full braided stainless steel oil line and aluminum M18 to 10AN banjo fittings that will not corrode or break down over time. The Mazda RX-8 oil cooler line fits onto the vehicle with no additional modification, and does not require any cutting to your vehicle or permanent removal of parts. Keep your RX-8 protected and running smooth! As with all our products, this RX-8 oil cooler line includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct-fit replacement for the 2004–2011 Mazda RX-8\u003cbr\u003ePremade braided stainless steel oil line and aluminum fittings replace corrosion-prone stock rubber line\u003cbr\u003eKit comes with the braided stainless steel line, M18 banjo bolts, and oil seals for a trouble-free installation\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Stainless Steel\u003cbr\u003eMax Recommended PSI 750psi\u003cbr\u003eMin Temp -40°F\u003cbr\u003eNote This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eMax Temp +300°F\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 13B-MSP (Renesis)\u003cbr\u003eChassis Codes SE3P\u003cbr\u003eCaution This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) 2ft, 4in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(2) M18 x -10AN Banjo Bolts w\/ Dowty Oil Seals\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mazda RX-8 has a high-winding rotary engine capable of easily reaching 9,000 RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX-8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine’s oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber RX-8 oil cooler lines and steel fittings can severely corrode and degrade over time. The most frequent RX-8 oil cooler line to corrode is located on the left hand side of the car near the front suspension assembly. The design of the vehicle and location of the line are apt to collect dirt and road salt from winter. With the Mishimoto replacement oil line, not only is this problematic line replaced, it’s replaced with a full braided stainless steel oil line and aluminum M18 to 10AN banjo fittings that will not corrode or break down over time. The Mazda RX-8 oil cooler line fits onto the vehicle with no additional modification, and does not require any cutting to your vehicle or permanent removal of parts. Keep your RX-8 protected and running smooth! As with all our products, this RX-8 oil cooler line includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":2097800020065,"title":"Sard Triple Core Radiator - Suzuki - Swift ZC11S (MT)","handle":"sard-triple-core-radiator-suzuki-swift-zc11s-mt-40887","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Sard\u003cbr\u003ePart Number: 40887\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Triple Core\u003cbr\u003eRadiator Cap included (unless the stock radiator design does not have the cap on the radiator itself)\u003cbr\u003e\u003cbr\u003eSard Racing company is an arm of Sard Japan manufacturing aluminum radiator at an affordable price.\u003cbr\u003e\nThis radiator is a Full aluminium unit to help in cooling down your engine in any occasion. With its full polished body and Sard embossed logo it ensures the perfect look and efficiency in your engine bay. These radiators fit the stock fan mounting points. Slim fans are available in the shop.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSwift | ZC11S | 2004-2010 | NA | M13A | I4\u003c!--split--\u003e","published_at":"2019-04-28T18:03:23+08:00","created_at":"2019-04-28T18:03:24+08:00","vendor":"Sard","type":"Radiators","tags":["2004","2005","2006","2007","2008","2009","2010","520x0y2.35z190","cooling","mt","radiators","sard","SG1","SPE206","suzuki","swift-zc11s-2004-2010-na-m13a-i4","ws130"],"price":28575,"price_min":28575,"price_max":28575,"available":true,"price_varies":false,"compare_at_price":38100,"compare_at_price_min":38100,"compare_at_price_max":38100,"compare_at_price_varies":false,"variants":[{"id":19775376228449,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"40887","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Sard Triple Core Radiator - Suzuki - Swift ZC11S (MT)","public_title":null,"options":["Default Title"],"price":28575,"weight":17500,"compare_at_price":38100,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SARD_radiator_1_6481eeee-c5ba-4303-9b66-1114fa60f277.jpg?v=1710179454"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SARD_radiator_1_6481eeee-c5ba-4303-9b66-1114fa60f277.jpg?v=1710179454","options":["Title"],"media":[{"alt":"Sard Triple Core Radiator - Suzuki - Swift ZC11S (MT) - 40887 - RZCREWGARAGE","id":25435278049462,"position":1,"preview_image":{"aspect_ratio":1.509,"height":795,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SARD_radiator_1_6481eeee-c5ba-4303-9b66-1114fa60f277.jpg?v=1710179454"},"aspect_ratio":1.509,"height":795,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SARD_radiator_1_6481eeee-c5ba-4303-9b66-1114fa60f277.jpg?v=1710179454","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Sard\u003cbr\u003ePart Number: 40887\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Triple Core\u003cbr\u003eRadiator Cap included (unless the stock radiator design does not have the cap on the radiator itself)\u003cbr\u003e\u003cbr\u003eSard Racing company is an arm of Sard Japan manufacturing aluminum radiator at an affordable price.\u003cbr\u003e\nThis radiator is a Full aluminium unit to help in cooling down your engine in any occasion. With its full polished body and Sard embossed logo it ensures the perfect look and efficiency in your engine bay. These radiators fit the stock fan mounting points. Slim fans are available in the shop.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSwift | ZC11S | 2004-2010 | NA | M13A | I4\u003c!--split--\u003e"}

{"id":2097800085601,"title":"Sard Triple Core Radiator - Suzuki - Swift ZC21S (MT)","handle":"sard-triple-core-radiator-suzuki-swift-zc21s-mt-40887","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Sard\u003cbr\u003ePart Number: 40887\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Triple Core\u003cbr\u003eRadiator Cap included (unless the stock radiator design does not have the cap on the radiator itself)\u003cbr\u003e\u003cbr\u003eSard Racing company is an arm of Sard Japan manufacturing aluminum radiator at an affordable price.\u003cbr\u003e\nThis radiator is a Full aluminium unit to help in cooling down your engine in any occasion. With its full polished body and Sard embossed logo it ensures the perfect look and efficiency in your engine bay. These radiators fit the stock fan mounting points. Slim fans are available in the shop.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSwift | ZC21S | 2004-2010 | NA | M15A | I4\u003c!--split--\u003e","published_at":"2019-04-28T18:03:25+08:00","created_at":"2019-04-28T18:03:25+08:00","vendor":"Sard","type":"Radiators","tags":["2004","2005","2006","2007","2008","2009","2010","520x0y2.35z190","cooling","mt","radiators","sard","SG1","SPE206","suzuki","swift-zc21s-2004-2010-na-m15a-i4","ws130"],"price":28575,"price_min":28575,"price_max":28575,"available":true,"price_varies":false,"compare_at_price":38100,"compare_at_price_min":38100,"compare_at_price_max":38100,"compare_at_price_varies":false,"variants":[{"id":19775376293985,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"40887","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Sard Triple Core Radiator - Suzuki - Swift ZC21S (MT)","public_title":null,"options":["Default Title"],"price":28575,"weight":17500,"compare_at_price":38100,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SARD_radiator_1_3312ca1a-5dfa-47c1-bb50-087ae93e1d43.jpg?v=1710179453"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SARD_radiator_1_3312ca1a-5dfa-47c1-bb50-087ae93e1d43.jpg?v=1710179453","options":["Title"],"media":[{"alt":"Sard Triple Core Radiator - Suzuki - Swift ZC21S (MT) - 40887 - RZCREWGARAGE","id":25435278082230,"position":1,"preview_image":{"aspect_ratio":1.509,"height":795,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SARD_radiator_1_3312ca1a-5dfa-47c1-bb50-087ae93e1d43.jpg?v=1710179453"},"aspect_ratio":1.509,"height":795,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SARD_radiator_1_3312ca1a-5dfa-47c1-bb50-087ae93e1d43.jpg?v=1710179453","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Sard\u003cbr\u003ePart Number: 40887\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Triple Core\u003cbr\u003eRadiator Cap included (unless the stock radiator design does not have the cap on the radiator itself)\u003cbr\u003e\u003cbr\u003eSard Racing company is an arm of Sard Japan manufacturing aluminum radiator at an affordable price.\u003cbr\u003e\nThis radiator is a Full aluminium unit to help in cooling down your engine in any occasion. With its full polished body and Sard embossed logo it ensures the perfect look and efficiency in your engine bay. These radiators fit the stock fan mounting points. Slim fans are available in the shop.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSwift | ZC21S | 2004-2010 | NA | M15A | I4\u003c!--split--\u003e"}

{"id":2097800183905,"title":"Sard Triple Core Radiator - Suzuki - Swift Sport ZC31S (MT)","handle":"sard-triple-core-radiator-suzuki-swift-sport-zc31s-mt-40887","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Sard\u003cbr\u003ePart Number: 40887\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Triple Core\u003cbr\u003eRadiator Cap included (unless the stock radiator design does not have the cap on the radiator itself)\u003cbr\u003e\u003cbr\u003eSard Racing company is an arm of Sard Japan manufacturing aluminum radiator at an affordable price.\u003cbr\u003e\nThis radiator is a Full aluminium unit to help in cooling down your engine in any occasion. With its full polished body and Sard embossed logo it ensures the perfect look and efficiency in your engine bay. These radiators fit the stock fan mounting points. Slim fans are available in the shop.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC31S | 2004-2010 | NA | M16A | I4\u003c!--split--\u003e","published_at":"2019-04-28T18:03:26+08:00","created_at":"2019-04-28T18:03:26+08:00","vendor":"Sard","type":"Radiators","tags":["2004","2005","2006","2007","2008","2009","2010","520x0y2.35z190","cooling","mt","radiators","sard","SG1","SPE206","suzuki","swift-sport-zc31s-2004-2010-na-m16a-i4","ws130"],"price":28575,"price_min":28575,"price_max":28575,"available":true,"price_varies":false,"compare_at_price":38100,"compare_at_price_min":38100,"compare_at_price_max":38100,"compare_at_price_varies":false,"variants":[{"id":19775376359521,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"40887","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Sard Triple Core Radiator - Suzuki - Swift Sport ZC31S (MT)","public_title":null,"options":["Default Title"],"price":28575,"weight":17500,"compare_at_price":38100,"inventory_quantity":46,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/SARD_radiator_1_1a0128d1-9bb0-4b9d-83c3-a7827b6c4a62.jpg?v=1710179477"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SARD_radiator_1_1a0128d1-9bb0-4b9d-83c3-a7827b6c4a62.jpg?v=1710179477","options":["Title"],"media":[{"alt":"Sard Triple Core Radiator - Suzuki - Swift Sport ZC31S (MT) - 40887 - RZCREWGARAGE","id":25435278114998,"position":1,"preview_image":{"aspect_ratio":1.509,"height":795,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SARD_radiator_1_1a0128d1-9bb0-4b9d-83c3-a7827b6c4a62.jpg?v=1710179477"},"aspect_ratio":1.509,"height":795,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/SARD_radiator_1_1a0128d1-9bb0-4b9d-83c3-a7827b6c4a62.jpg?v=1710179477","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Sard\u003cbr\u003ePart Number: 40887\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Triple Core\u003cbr\u003eRadiator Cap included (unless the stock radiator design does not have the cap on the radiator itself)\u003cbr\u003e\u003cbr\u003eSard Racing company is an arm of Sard Japan manufacturing aluminum radiator at an affordable price.\u003cbr\u003e\nThis radiator is a Full aluminium unit to help in cooling down your engine in any occasion. With its full polished body and Sard embossed logo it ensures the perfect look and efficiency in your engine bay. These radiators fit the stock fan mounting points. Slim fans are available in the shop.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSwift Sport | ZC31S | 2004-2010 | NA | M16A | I4\u003c!--split--\u003e"}

{"id":2095452094561,"title":"Samco Japan - 5 Pcs Cooling Hoses Set Radiator - Mazda - MX-5 Miata Roadster NC","handle":"samco-japan-5-pcs-cooling-hoses-set-radiator-mazda-mx-5-miata-roadster-nc-40tcs590-c","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Samco Japan\u003cbr\u003ePart Number: 40TCS590\/C\u003cbr\u003eHose Type: Cooling Hoses\u003cbr\u003eHose Numbers per set: 5\u003cbr\u003eHose Colour (Please leave us a note during checkout): Standard color:\tBlue \/ Red \/ Black \/ Green \/ Yellow \/ Orange\u003cbr\u003e\u003cbr\u003eSamco is the leader in the Cooling hose system for a reason. Their Unique 3 to 5 plies design ensure long lasting qualities to any type of usages: Boost, Cooling, Fueling. Their design is composed of:\u003cbr\u003eOuter surface coating to resist extreem deterioration to heat or cold.\u003cbr\u003eUnique 3 to 5 plies lamination superposing original silicone material and aramid fiber on 3 to 5 layers depending on the item and hose diameter, the strength exceeds by far any OEM units.\nThe 5 kg \/ cm2 normal maximum pressure resistance (in the case of inner diameter 25 mm) prevents hose expansion and \nburst.\u003cbr\u003ePrecise and carefully hand-made construction creates an extremely flat inner surface, completely eliminating stress on the fluid . In addition, \nall sections are covered by adopting suitable treatment for applications such as oil, fuel, heat resistance.\u003cbr\u003e\u003cbr\u003ePlease note that all Hoses from Samco are made to order: allow 6 to 8 weeks lead time. Colour are customisable on order, let us know during checkout in the notes. All Samco Hoses sold on our website are garantied original and follow their strict warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMX-5 Miata Roadster | NCEC | 2005-2008 | NA | LF-VE | I4\u003cbr\u003eMX-5 Miata Roadster | NCEC RS | 2008-2015 | NA | LF-VE RS | I4\u003c!--split--\u003e","published_at":"2019-04-26T16:18:27+08:00","created_at":"2019-04-26T16:18:28+08:00","vendor":"Samco Japan","type":"Cooling Hoses","tags":["2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","37000x20y1.1z1000","cooling","cooling-hoses","coolinghoses","CTA206","JP1","mazda","mx-5-miata-roadster-ncec-2005-2008-na-lf-ve-i4","mx-5-miata-roadster-ncec-rs-2008-2015-na-lf-ve-rs-i4","new","samco-japan","ws119"],"price":33110,"price_min":33110,"price_max":33110,"available":true,"price_varies":false,"compare_at_price":38500,"compare_at_price_min":38500,"compare_at_price_max":38500,"compare_at_price_varies":false,"variants":[{"id":19755641274465,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"40TCS590\/C","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Samco Japan - 5 Pcs Cooling Hoses Set Radiator - Mazda - MX-5 Miata Roadster NC","public_title":null,"options":["Default Title"],"price":33110,"weight":6000,"compare_at_price":38500,"inventory_quantity":46,"inventory_management":"shopify","inventory_policy":"deny","barcode":"40TCS590C","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_5_hoses_radiator_set.jpg?v=1688960115"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_5_hoses_radiator_set.jpg?v=1688960115","options":["Title"],"media":[{"alt":"Samco Japan - 5 Pcs Cooling Hoses Set Radiator - Mazda - MX-5 Miata Roadster NC - 40TCS590\/C - RZCREWGARAGE","id":26388476657846,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_5_hoses_radiator_set.jpg?v=1688960115"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/samco_5_hoses_radiator_set.jpg?v=1688960115","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Samco Japan\u003cbr\u003ePart Number: 40TCS590\/C\u003cbr\u003eHose Type: Cooling Hoses\u003cbr\u003eHose Numbers per set: 5\u003cbr\u003eHose Colour (Please leave us a note during checkout): Standard color:\tBlue \/ Red \/ Black \/ Green \/ Yellow \/ Orange\u003cbr\u003e\u003cbr\u003eSamco is the leader in the Cooling hose system for a reason. Their Unique 3 to 5 plies design ensure long lasting qualities to any type of usages: Boost, Cooling, Fueling. Their design is composed of:\u003cbr\u003eOuter surface coating to resist extreem deterioration to heat or cold.\u003cbr\u003eUnique 3 to 5 plies lamination superposing original silicone material and aramid fiber on 3 to 5 layers depending on the item and hose diameter, the strength exceeds by far any OEM units.\nThe 5 kg \/ cm2 normal maximum pressure resistance (in the case of inner diameter 25 mm) prevents hose expansion and \nburst.\u003cbr\u003ePrecise and carefully hand-made construction creates an extremely flat inner surface, completely eliminating stress on the fluid . In addition, \nall sections are covered by adopting suitable treatment for applications such as oil, fuel, heat resistance.\u003cbr\u003e\u003cbr\u003ePlease note that all Hoses from Samco are made to order: allow 6 to 8 weeks lead time. Colour are customisable on order, let us know during checkout in the notes. All Samco Hoses sold on our website are garantied original and follow their strict warranty!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMX-5 Miata Roadster | NCEC | 2005-2008 | NA | LF-VE | I4\u003cbr\u003eMX-5 Miata Roadster | NCEC RS | 2008-2015 | NA | LF-VE RS | I4\u003c!--split--\u003e"}

{"id":2095440035937,"title":"Skunk 2 - Alpha Series Full Size Radiators Radiator - Mazda - MX-5 Miata Roadster NC (MT)","handle":"skunk-2-alpha-series-full-size-radiators-radiator-mazda-mx-5-miata-roadster-nc-mt-349-10-1001","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Skunk 2\u003cbr\u003ePart Number: 349-10-1001\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 1 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMX-5 Miata Roadster | NCEC | 2005-2008 | NA | LF-VE | I4\u003cbr\u003eMX-5 Miata Roadster | NCEC RS | 2008-2015 | NA | LF-VE RS | I4\u003c!--split--\u003e","published_at":"2019-04-26T16:12:20+08:00","created_at":"2019-04-26T16:12:21+08:00","vendor":"Skunk 2","type":"Radiators","tags":["2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","280.15x23y1z0","cooling","CTOT14","mazda","mt","mx-5-miata-roadster-ncec-2005-2008-na-lf-ve-i4","mx-5-miata-roadster-ncec-rs-2008-2015-na-lf-ve-rs-i4","radiators","skunk-2","US1","ws17"],"price":35868,"price_min":35868,"price_max":35868,"available":true,"price_varies":false,"compare_at_price":36600,"compare_at_price_min":36600,"compare_at_price_max":36600,"compare_at_price_varies":false,"variants":[{"id":19755564073057,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"349-10-1001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Skunk 2 - Alpha Series Full Size Radiators Radiator - Mazda - MX-5 Miata Roadster NC (MT)","public_title":null,"options":["Default Title"],"price":35868,"weight":10622,"compare_at_price":36600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/349-10-1001.jpg?v=1710179291"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/349-10-1001.jpg?v=1710179291","options":["Title"],"media":[{"alt":"Skunk 2 - Alpha Series Full Size Radiators Radiator - Mazda - MX-5 Miata Roadster NC (MT) - 349-10-1001 - RZCREWGARAGE","id":25382033293494,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/349-10-1001.jpg?v=1710179291"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/349-10-1001.jpg?v=1710179291","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Skunk 2\u003cbr\u003ePart Number: 349-10-1001\u003cbr\u003eTransmission: MT\u003cbr\u003eCore Type: Dual Core\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 1 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMX-5 Miata Roadster | NCEC | 2005-2008 | NA | LF-VE | I4\u003cbr\u003eMX-5 Miata Roadster | NCEC RS | 2008-2015 | NA | LF-VE RS | I4\u003c!--split--\u003e"}