Cusco Japan

{"id":681187967003,"title":"Cusco Japan Type Mz - 1.5 way (1.5\u00262way) Rear LSD - Mazda MX-5 Miata Roadster - NA8C\/NB6C\/NB8C (MT,AT)","handle":"cusco-japan-type-mz-1-5-way-1-5-2way-rear-lsd-mazda-mx-5-miata-roadster-na8c-nb6c-nb8c-mt-at-na8c-nb6c-nb8c-lsd-177-k15","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 177 K15\u003cbr\u003eLSD Model: Type Mz\u003cbr\u003eLSD Type: 1.5 way (1.5\u0026amp;2way) \u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMX-5 Miata Roadster | NA8C Zenki | 1993-1995 | NA | BP | I4\u003cbr\u003eMX-5 Miata Roadster | NA8C Kouki | 1995-1997 | NA | BP | I4\u003cbr\u003eMX-5 Miata Roadster | NB6C Zenki | 1998-2000 | NA | B6-ZE | I4\u003cbr\u003eMX-5 Miata Roadster | NB6C Kouki | 2000-2005 | NA | B6-ZE | I4\u003cbr\u003eMX-5 Miata Roadster | NB8C | 2000-2005 | NA | BP-VE | I4\u003cbr\u003eMX-5 Miata Roadster | NB8C | 2000-2005 | NA | BP-ZE | I4\u003cbr\u003eMX-5 Miata Roadster | NB8C | 1998-2000 | NA | BP-ZE | I4\u003cbr\u003eMX-5 Miata Roadster | NB8C | 2004-2005 | TC | BP-ZET | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2018-03-07T23:43:00+08:00","created_at":"2018-03-07T23:43:00+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1-5-way","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","2004","2005","at","cusco-japan","jp1","limited-slip-diffs","mazda","mt","mx-5-miata-roadster-na8c-kouki-1995-1997-na-bp-i4","mx-5-miata-roadster-na8c-zenki-1993-1995-na-bp-i4","mx-5-miata-roadster-nb6c-kouki-2000-2005-na-b6-ze-i4","mx-5-miata-roadster-nb6c-zenki-1998-2000-na-b6-ze-i4","mx-5-miata-roadster-nb8c-1998-2000-na-bp-ze-i4","mx-5-miata-roadster-nb8c-2000-2005-na-bp-ve-i4","mx-5-miata-roadster-nb8c-2000-2005-na-bp-ze-i4","mx-5-miata-roadster-nb8c-2004-2005-tc-bp-zet-i4","rear","ws119"],"price":100380,"price_min":100380,"price_max":100380,"available":true,"price_varies":false,"compare_at_price":117800,"compare_at_price_min":117800,"compare_at_price_max":117800,"compare_at_price_varies":false,"variants":[{"id":6437057331227,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 177 K15","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Mz - 1.5 way (1.5\u00262way) Rear LSD - Mazda MX-5 Miata Roadster - NA8C\/NB6C\/NB8C (MT,AT)","public_title":null,"options":["Default Title"],"price":100380,"weight":11000,"compare_at_price":117800,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_725b7a6f-1d36-4059-9c69-35f7e8c76e0c.jpg?v=1710155057"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_725b7a6f-1d36-4059-9c69-35f7e8c76e0c.jpg?v=1710155057","options":["Title"],"media":[{"alt":"Cusco Japan Type Mz - 1.5 way (1.5\u00262way) Rear LSD - Mazda MX-5 Miata Roadster - NA8C\/NB6C\/NB8C (MT,AT) - NA8C\/NB6C\/NB8C - LSD 177 K15","id":25540882464950,"position":1,"preview_image":{"aspect_ratio":1.0,"height":450,"width":450,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_725b7a6f-1d36-4059-9c69-35f7e8c76e0c.jpg?v=1710155057"},"aspect_ratio":1.0,"height":450,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_725b7a6f-1d36-4059-9c69-35f7e8c76e0c.jpg?v=1710155057","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 177 K15\u003cbr\u003eLSD Model: Type Mz\u003cbr\u003eLSD Type: 1.5 way (1.5\u0026amp;2way) \u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMX-5 Miata Roadster | NA8C Zenki | 1993-1995 | NA | BP | I4\u003cbr\u003eMX-5 Miata Roadster | NA8C Kouki | 1995-1997 | NA | BP | I4\u003cbr\u003eMX-5 Miata Roadster | NB6C Zenki | 1998-2000 | NA | B6-ZE | I4\u003cbr\u003eMX-5 Miata Roadster | NB6C Kouki | 2000-2005 | NA | B6-ZE | I4\u003cbr\u003eMX-5 Miata Roadster | NB8C | 2000-2005 | NA | BP-VE | I4\u003cbr\u003eMX-5 Miata Roadster | NB8C | 2000-2005 | NA | BP-ZE | I4\u003cbr\u003eMX-5 Miata Roadster | NB8C | 1998-2000 | NA | BP-ZE | I4\u003cbr\u003eMX-5 Miata Roadster | NB8C | 2004-2005 | TC | BP-ZET | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":681187704859,"title":"Cusco Japan Type Rs - 1.5 way (1.5\u00262way) Rear LSD - Mazda MX-5 Miata Roadster - NA8C\/NB6C\/NB8C (MT,AT)","handle":"cusco-japan-type-rs-1-5-way-1-5-2way-rear-lsd-mazda-mx-5-miata-roadster-na8c-nb6c-nb8c-mt-at-na8c-nb6c-nb8c-lsd-177-l15","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 177 L15\u003cbr\u003eLSD Model: Type Rs\u003cbr\u003eLSD Type: 1.5 way (1.5\u0026amp;2way) \u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMX-5 Miata Roadster | NA8C Zenki | 1993-1995 | NA | BP | I4\u003cbr\u003eMX-5 Miata Roadster | NA8C Kouki | 1995-1997 | NA | BP | I4\u003cbr\u003eMX-5 Miata Roadster | NB6C Zenki | 1998-2000 | NA | B6-ZE | I4\u003cbr\u003eMX-5 Miata Roadster | NB6C Kouki | 2000-2005 | NA | B6-ZE | I4\u003cbr\u003eMX-5 Miata Roadster | NB8C | 2000-2005 | NA | BP-VE | I4\u003cbr\u003eMX-5 Miata Roadster | NB8C | 2000-2005 | NA | BP-ZE | I4\u003cbr\u003eMX-5 Miata Roadster | NB8C | 1998-2000 | NA | BP-ZE | I4\u003cbr\u003eMX-5 Miata Roadster | NB8C | 2004-2005 | TC | BP-ZET | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2018-03-07T23:42:57+08:00","created_at":"2018-03-07T23:42:57+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1-5-way","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","2004","2005","at","cusco-japan","jp1","limited-slip-diffs","mazda","mt","mx-5-miata-roadster-na8c-kouki-1995-1997-na-bp-i4","mx-5-miata-roadster-na8c-zenki-1993-1995-na-bp-i4","mx-5-miata-roadster-nb6c-kouki-2000-2005-na-b6-ze-i4","mx-5-miata-roadster-nb6c-zenki-1998-2000-na-b6-ze-i4","mx-5-miata-roadster-nb8c-1998-2000-na-bp-ze-i4","mx-5-miata-roadster-nb8c-2000-2005-na-bp-ve-i4","mx-5-miata-roadster-nb8c-2000-2005-na-bp-ze-i4","mx-5-miata-roadster-nb8c-2004-2005-tc-bp-zet-i4","rear","ws119"],"price":100380,"price_min":100380,"price_max":100380,"available":true,"price_varies":false,"compare_at_price":117800,"compare_at_price_min":117800,"compare_at_price_max":117800,"compare_at_price_varies":false,"variants":[{"id":6437057036315,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 177 L15","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Rs - 1.5 way (1.5\u00262way) Rear LSD - Mazda MX-5 Miata Roadster - NA8C\/NB6C\/NB8C (MT,AT)","public_title":null,"options":["Default Title"],"price":100380,"weight":10000,"compare_at_price":117800,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_0de3ae7a-7831-4818-aaa6-86dfcae95bb5.jpg?v=1710155054"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_0de3ae7a-7831-4818-aaa6-86dfcae95bb5.jpg?v=1710155054","options":["Title"],"media":[{"alt":"Cusco Japan Type Rs - 1.5 way (1.5\u00262way) Rear LSD - Mazda MX-5 Miata Roadster - NA8C\/NB6C\/NB8C (MT,AT) - NA8C\/NB6C\/NB8C - LSD 177 L15","id":25540882235574,"position":1,"preview_image":{"aspect_ratio":1.0,"height":450,"width":450,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_0de3ae7a-7831-4818-aaa6-86dfcae95bb5.jpg?v=1710155054"},"aspect_ratio":1.0,"height":450,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_0de3ae7a-7831-4818-aaa6-86dfcae95bb5.jpg?v=1710155054","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 177 L15\u003cbr\u003eLSD Model: Type Rs\u003cbr\u003eLSD Type: 1.5 way (1.5\u0026amp;2way) \u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMX-5 Miata Roadster | NA8C Zenki | 1993-1995 | NA | BP | I4\u003cbr\u003eMX-5 Miata Roadster | NA8C Kouki | 1995-1997 | NA | BP | I4\u003cbr\u003eMX-5 Miata Roadster | NB6C Zenki | 1998-2000 | NA | B6-ZE | I4\u003cbr\u003eMX-5 Miata Roadster | NB6C Kouki | 2000-2005 | NA | B6-ZE | I4\u003cbr\u003eMX-5 Miata Roadster | NB8C | 2000-2005 | NA | BP-VE | I4\u003cbr\u003eMX-5 Miata Roadster | NB8C | 2000-2005 | NA | BP-ZE | I4\u003cbr\u003eMX-5 Miata Roadster | NB8C | 1998-2000 | NA | BP-ZE | I4\u003cbr\u003eMX-5 Miata Roadster | NB8C | 2004-2005 | TC | BP-ZET | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":681184231451,"title":"Cusco Japan Type Rs - 2 way (1.5 \u0026 2way) Rear LSD - Mazda RX-8 - SE3P (MT,AT)","handle":"cusco-japan-type-rs-2-way-1-5-2way-rear-lsd-mazda-rx-8-se3p-mt-at-se3p-lsd-165-l2","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 165 L2\u003cbr\u003eLSD Model: Type Rs\u003cbr\u003eLSD Type: 2 way (1.5 \u0026amp; 2way)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eRX-8 | SE3P Zenki | 2003-2008 | NA | 13B-MSP | R\u003cbr\u003eRX-8 | SE3P Kouki | 2008-2013 | NA | 13B-MSP | R\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2018-03-07T23:42:14+08:00","created_at":"2018-03-07T23:42:14+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["2-way","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","at","cusco-japan","jp1","limited-slip-diffs","mazda","mt","rear","rx-8-se3p-kouki-2008-2013-na-13b-msp-r","rx-8-se3p-zenki-2003-2008-na-13b-msp-r","ws119"],"price":108750,"price_min":108750,"price_max":108750,"available":true,"price_varies":false,"compare_at_price":127600,"compare_at_price_min":127600,"compare_at_price_max":127600,"compare_at_price_varies":false,"variants":[{"id":6437052252187,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 165 L2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Rs - 2 way (1.5 \u0026 2way) Rear LSD - Mazda RX-8 - SE3P (MT,AT)","public_title":null,"options":["Default Title"],"price":108750,"weight":10000,"compare_at_price":127600,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_21b90de3-c46a-486f-90d3-9703924a1a64.jpg?v=1710155013"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_21b90de3-c46a-486f-90d3-9703924a1a64.jpg?v=1710155013","options":["Title"],"media":[{"alt":"Cusco Japan Type Rs - 2 way (1.5 \u0026 2way) Rear LSD - Mazda RX-8 - SE3P (MT,AT) - SE3P - LSD 165 L2","id":25540874043574,"position":1,"preview_image":{"aspect_ratio":1.0,"height":450,"width":450,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_21b90de3-c46a-486f-90d3-9703924a1a64.jpg?v=1710155013"},"aspect_ratio":1.0,"height":450,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_21b90de3-c46a-486f-90d3-9703924a1a64.jpg?v=1710155013","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 165 L2\u003cbr\u003eLSD Model: Type Rs\u003cbr\u003eLSD Type: 2 way (1.5 \u0026amp; 2way)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eRX-8 | SE3P Zenki | 2003-2008 | NA | 13B-MSP | R\u003cbr\u003eRX-8 | SE3P Kouki | 2008-2013 | NA | 13B-MSP | R\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":681132949531,"title":"Cusco Japan Type Rs Spec F - 2 way (1.5 \u0026 2way) Rear LSD - Toyota 86 - ZN6 (Spec A to E) (MT,AT)","handle":"cusco-japan-type-rs-spec-f-2-way-1-5-2way-rear-lsd-toyota-86-zn6-spec-a-to-e-mt-at-zn6-lsd-986-lt2","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 986 LT2\u003cbr\u003eLSD Model: Type Rs Spec F\u003cbr\u003eLSD Type: 2 way (1.5 \u0026amp; 2way)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Spec-F LSD feature a special flat friction clutch plates which translates to a milder initial engagement when acceleration is ON or OFF. This setup is perfect for rear wheel drive setups in circuit situations, as well as minimizing power loss for low horsepowered vehicles. The Spec-F retains the Type Rs specs yet increases smoothness in cornering due to its FFP (Flat Friction Plate). These plates increase oil passage and therefore give a very polyvalent LSD for sunday racers, but also street roads.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e86 | ZN6 SPEC A | 2012-2013 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC B | 2013-2014 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC C | 2014-2015 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC D | 2015-2016 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC E | 2016-2018 | NA | 4U-GSE | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2018-03-07T23:28:46+08:00","created_at":"2018-03-07T23:28:46+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["2-way","2012","2013","2014","2015","2016","2017","2018","at","cusco-japan","jp1","limited-slip-diffs","mt","rear","toyota","ws119"],"price":108750,"price_min":108750,"price_max":108750,"available":true,"price_varies":false,"compare_at_price":127600,"compare_at_price_min":127600,"compare_at_price_max":127600,"compare_at_price_varies":false,"variants":[{"id":6436964237339,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 986 LT2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Rs Spec F - 2 way (1.5 \u0026 2way) Rear LSD - Toyota 86 - ZN6 (Spec A to E) (MT,AT)","public_title":null,"options":["Default Title"],"price":108750,"weight":10000,"compare_at_price":127600,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/type_rs_spec_f_lds_cusco_c9b89bfc-2e79-4dc0-b387-c6f00d44183b.jpg?v=1710154269"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/type_rs_spec_f_lds_cusco_c9b89bfc-2e79-4dc0-b387-c6f00d44183b.jpg?v=1710154269","options":["Title"],"media":[{"alt":"Cusco Japan Type Rs Spec F - 2 way (1.5 \u0026 2way) Rear LSD - Toyota 86 - ZN6 (Spec A to E) (MT,AT) - ZN6 - LSD 986 LT2","id":25540772593846,"position":1,"preview_image":{"aspect_ratio":0.947,"height":475,"width":450,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/type_rs_spec_f_lds_cusco_c9b89bfc-2e79-4dc0-b387-c6f00d44183b.jpg?v=1710154269"},"aspect_ratio":0.947,"height":475,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/type_rs_spec_f_lds_cusco_c9b89bfc-2e79-4dc0-b387-c6f00d44183b.jpg?v=1710154269","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 986 LT2\u003cbr\u003eLSD Model: Type Rs Spec F\u003cbr\u003eLSD Type: 2 way (1.5 \u0026amp; 2way)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Spec-F LSD feature a special flat friction clutch plates which translates to a milder initial engagement when acceleration is ON or OFF. This setup is perfect for rear wheel drive setups in circuit situations, as well as minimizing power loss for low horsepowered vehicles. The Spec-F retains the Type Rs specs yet increases smoothness in cornering due to its FFP (Flat Friction Plate). These plates increase oil passage and therefore give a very polyvalent LSD for sunday racers, but also street roads.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e86 | ZN6 SPEC A | 2012-2013 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC B | 2013-2014 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC C | 2014-2015 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC D | 2015-2016 | NA | 4U-GSE | H4\u003cbr\u003e86 | ZN6 SPEC E | 2016-2018 | NA | 4U-GSE | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":681193078811,"title":"Cusco Japan Type Mz Spec F - 1 way (1\u00262way) Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT)","handle":"cusco-japan-type-mz-spec-f-1-way-1-2way-rear-lsd-subaru-brz-zc6-applied-a-to-e-mt-at-zc6-applied-a-to-e-lsd-986-et","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 986 ET\u003cbr\u003eLSD Model: Type Mz Spec F\u003cbr\u003eLSD Type: 1 way (1\u0026amp;2way) \u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Spec-F LSD feature a special flat friction clutch plates which translates to a milder initial engagement when acceleration is ON or OFF. This setup is perfect for rear wheel drive setups in circuit situations, as well as minimizing power loss for low horsepowered vehicles. The Spec-F retains the Type MZ specs yet increases smoothness in cornering due to its FFP (Flat Friction Plate). These plates increase oil passage and therefore give a very polyvalent LSD for sunday racers, but also street roads.\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2018-03-07T23:44:04+08:00","created_at":"2018-03-07T23:44:04+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1-way","2012","2013","2014","2015","2016","2017","at","brz-zc6-applied-c-2014-2015-na-fa20d-h4","cusco-japan","jp1","limited-slip-diffs","mt","rear","subaru","ws119"],"price":108750,"price_min":108750,"price_max":108750,"available":true,"price_varies":false,"compare_at_price":127600,"compare_at_price_min":127600,"compare_at_price_max":127600,"compare_at_price_varies":false,"variants":[{"id":6437066997787,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 986 ET","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Mz Spec F - 1 way (1\u00262way) Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT)","public_title":null,"options":["Default Title"],"price":108750,"weight":11000,"compare_at_price":127600,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Type_MZ_spec_F_lad_e75bca53-591e-43fe-8fed-07473ce6a043.jpg?v=1710155134"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Type_MZ_spec_F_lad_e75bca53-591e-43fe-8fed-07473ce6a043.jpg?v=1710155134","options":["Title"],"media":[{"alt":"Cusco Japan Type Mz Spec F - 1 way (1\u00262way) Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT) - ZC6 APPLIED A to E - LSD 986 ET","id":25540896587958,"position":1,"preview_image":{"aspect_ratio":0.928,"height":485,"width":450,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Type_MZ_spec_F_lad_e75bca53-591e-43fe-8fed-07473ce6a043.jpg?v=1710155134"},"aspect_ratio":0.928,"height":485,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Type_MZ_spec_F_lad_e75bca53-591e-43fe-8fed-07473ce6a043.jpg?v=1710155134","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 986 ET\u003cbr\u003eLSD Model: Type Mz Spec F\u003cbr\u003eLSD Type: 1 way (1\u0026amp;2way) \u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Spec-F LSD feature a special flat friction clutch plates which translates to a milder initial engagement when acceleration is ON or OFF. This setup is perfect for rear wheel drive setups in circuit situations, as well as minimizing power loss for low horsepowered vehicles. The Spec-F retains the Type MZ specs yet increases smoothness in cornering due to its FFP (Flat Friction Plate). These plates increase oil passage and therefore give a very polyvalent LSD for sunday racers, but also street roads.\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":681194291227,"title":"Cusco Japan Type Mz Spec F (Super Low Final, Circuit Setting) - 1.5 way Super Low Final (Circuit Setting) Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT)","handle":"cusco-japan-type-mz-spec-f-super-low-final-circuit-setting-1-5-way-super-low-final-circuit-setting-rear-lsd-subaru-brz-zc6-applied-a-to-e-mt-at-zc6-applied-a-to-e-lsd-987-mt15","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 987 MT15\u003cbr\u003eLSD Model: Type Mz Spec F (Super Low Final, Circuit Setting)\u003cbr\u003eLSD Type: 1.5 way Super Low Final (Circuit Setting)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Spec-F LSD feature a special flat friction clutch plates which translates to a milder initial engagement when acceleration is ON or OFF. This setup is perfect for rear wheel drive setups in circuit situations, as well as minimizing power loss for low horsepowered vehicles. The Spec-F retains the Type MZ specs yet increases smoothness in cornering due to its FFP (Flat Friction Plate). These plates increase oil passage and therefore give a very polyvalent LSD for sunday racers, but also street roads.\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil. The circuit spec is set to 35\/20 for maximum efficiency on track and winding road!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2018-03-07T23:44:20+08:00","created_at":"2018-03-07T23:44:20+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1-5-way","2012","2013","2014","2015","2016","2017","at","brz-zc6-applied-c-2014-2015-na-fa20d-h4","cusco-japan","jp1","limited-slip-diffs","mt","rear","subaru","ws118"],"price":125480,"price_min":125480,"price_max":125480,"available":true,"price_varies":false,"compare_at_price":147200,"compare_at_price_min":147200,"compare_at_price_max":147200,"compare_at_price_varies":false,"variants":[{"id":6437068603419,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 987 MT15","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Mz Spec F (Super Low Final, Circuit Setting) - 1.5 way Super Low Final (Circuit Setting) Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT)","public_title":null,"options":["Default Title"],"price":125480,"weight":11000,"compare_at_price":147200,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Type_MZ_spec_F_lad_2d574c8b-6f66-4d7f-b552-2537a945b1a8.jpg?v=1710155155"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Type_MZ_spec_F_lad_2d574c8b-6f66-4d7f-b552-2537a945b1a8.jpg?v=1710155155","options":["Title"],"media":[{"alt":"Cusco Japan Type Mz Spec F (Super Low Final, Circuit Setting) - 1.5 way Super Low Final (Circuit Setting) Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT) - ZC6 APPLIED A to E - LSD 987 MT15","id":25540902453430,"position":1,"preview_image":{"aspect_ratio":0.928,"height":485,"width":450,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Type_MZ_spec_F_lad_2d574c8b-6f66-4d7f-b552-2537a945b1a8.jpg?v=1710155155"},"aspect_ratio":0.928,"height":485,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Type_MZ_spec_F_lad_2d574c8b-6f66-4d7f-b552-2537a945b1a8.jpg?v=1710155155","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 987 MT15\u003cbr\u003eLSD Model: Type Mz Spec F (Super Low Final, Circuit Setting)\u003cbr\u003eLSD Type: 1.5 way Super Low Final (Circuit Setting)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Spec-F LSD feature a special flat friction clutch plates which translates to a milder initial engagement when acceleration is ON or OFF. This setup is perfect for rear wheel drive setups in circuit situations, as well as minimizing power loss for low horsepowered vehicles. The Spec-F retains the Type MZ specs yet increases smoothness in cornering due to its FFP (Flat Friction Plate). These plates increase oil passage and therefore give a very polyvalent LSD for sunday racers, but also street roads.\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil. The circuit spec is set to 35\/20 for maximum efficiency on track and winding road!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":681194160155,"title":"Cusco Japan Type Mz Spec F (Super Low Final) - 1.5 way (1.5\u00262way) for Super Low final Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT)","handle":"cusco-japan-type-mz-spec-f-super-low-final-1-5-way-1-5-2way-for-super-low-final-rear-lsd-subaru-brz-zc6-applied-a-to-e-mt-at-zc6-applied-a-to-e-lsd-987-kt15","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 987 KT15\u003cbr\u003eLSD Model: Type Mz Spec F (Super Low Final)\u003cbr\u003eLSD Type: 1.5 way (1.5\u0026amp;2way) for Super Low final\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Spec-F LSD feature a special flat friction clutch plates which translates to a milder initial engagement when acceleration is ON or OFF. This setup is perfect for rear wheel drive setups in circuit situations, as well as minimizing power loss for low horsepowered vehicles. The Spec-F retains the Type MZ specs yet increases smoothness in cornering due to its FFP (Flat Friction Plate). These plates increase oil passage and therefore give a very polyvalent LSD for sunday racers, but also street roads.\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2018-03-07T23:44:19+08:00","created_at":"2018-03-07T23:44:19+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1-5-way","2012","2013","2014","2015","2016","2017","at","brz-zc6-applied-c-2014-2015-na-fa20d-h4","cusco-japan","jp1","limited-slip-diffs","mt","rear","subaru","ws118"],"price":125480,"price_min":125480,"price_max":125480,"available":true,"price_varies":false,"compare_at_price":147200,"compare_at_price_min":147200,"compare_at_price_max":147200,"compare_at_price_varies":false,"variants":[{"id":6437068439579,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 987 KT15","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Mz Spec F (Super Low Final) - 1.5 way (1.5\u00262way) for Super Low final Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT)","public_title":null,"options":["Default Title"],"price":125480,"weight":11000,"compare_at_price":147200,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Type_MZ_spec_F_lad_ff732465-916f-4c1b-9081-d2e792351fbc.jpg?v=1710155155"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Type_MZ_spec_F_lad_ff732465-916f-4c1b-9081-d2e792351fbc.jpg?v=1710155155","options":["Title"],"media":[{"alt":"Cusco Japan Type Mz Spec F (Super Low Final) - 1.5 way (1.5\u00262way) for Super Low final Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT) - ZC6 APPLIED A to E - LSD 987 KT15","id":25540902158518,"position":1,"preview_image":{"aspect_ratio":0.928,"height":485,"width":450,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Type_MZ_spec_F_lad_ff732465-916f-4c1b-9081-d2e792351fbc.jpg?v=1710155155"},"aspect_ratio":0.928,"height":485,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Type_MZ_spec_F_lad_ff732465-916f-4c1b-9081-d2e792351fbc.jpg?v=1710155155","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 987 KT15\u003cbr\u003eLSD Model: Type Mz Spec F (Super Low Final)\u003cbr\u003eLSD Type: 1.5 way (1.5\u0026amp;2way) for Super Low final\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Spec-F LSD feature a special flat friction clutch plates which translates to a milder initial engagement when acceleration is ON or OFF. This setup is perfect for rear wheel drive setups in circuit situations, as well as minimizing power loss for low horsepowered vehicles. The Spec-F retains the Type MZ specs yet increases smoothness in cornering due to its FFP (Flat Friction Plate). These plates increase oil passage and therefore give a very polyvalent LSD for sunday racers, but also street roads.\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":681194225691,"title":"Cusco Japan Type Mz Spec F (Super Low Final) - 2 way (1.5 \u0026 2way) Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT)","handle":"cusco-japan-type-mz-spec-f-super-low-final-2-way-1-5-2way-rear-lsd-subaru-brz-zc6-applied-a-to-e-mt-at-zc6-applied-a-to-e-lsd-987-kt2","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 987 KT2\u003cbr\u003eLSD Model: Type Mz Spec F (Super Low Final)\u003cbr\u003eLSD Type: 2 way (1.5 \u0026amp; 2way)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Spec-F LSD feature a special flat friction clutch plates which translates to a milder initial engagement when acceleration is ON or OFF. This setup is perfect for rear wheel drive setups in circuit situations, as well as minimizing power loss for low horsepowered vehicles. The Spec-F retains the Type MZ specs yet increases smoothness in cornering due to its FFP (Flat Friction Plate). These plates increase oil passage and therefore give a very polyvalent LSD for sunday racers, but also street roads.\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2018-03-07T23:44:20+08:00","created_at":"2018-03-07T23:44:20+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["2-way","2012","2013","2014","2015","2016","2017","at","brz-zc6-applied-c-2014-2015-na-fa20d-h4","cusco-japan","jp1","limited-slip-diffs","mt","rear","subaru","ws118"],"price":125480,"price_min":125480,"price_max":125480,"available":true,"price_varies":false,"compare_at_price":147200,"compare_at_price_min":147200,"compare_at_price_max":147200,"compare_at_price_varies":false,"variants":[{"id":6437068537883,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 987 KT2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Mz Spec F (Super Low Final) - 2 way (1.5 \u0026 2way) Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT)","public_title":null,"options":["Default Title"],"price":125480,"weight":11000,"compare_at_price":147200,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Type_MZ_spec_F_lad_14041997-35cb-41f5-bc48-40c073adce34.jpg?v=1710155155"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Type_MZ_spec_F_lad_14041997-35cb-41f5-bc48-40c073adce34.jpg?v=1710155155","options":["Title"],"media":[{"alt":"Cusco Japan Type Mz Spec F (Super Low Final) - 2 way (1.5 \u0026 2way) Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT) - ZC6 APPLIED A to E - LSD 987 KT2","id":25540902387894,"position":1,"preview_image":{"aspect_ratio":0.928,"height":485,"width":450,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Type_MZ_spec_F_lad_14041997-35cb-41f5-bc48-40c073adce34.jpg?v=1710155155"},"aspect_ratio":0.928,"height":485,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Type_MZ_spec_F_lad_14041997-35cb-41f5-bc48-40c073adce34.jpg?v=1710155155","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 987 KT2\u003cbr\u003eLSD Model: Type Mz Spec F (Super Low Final)\u003cbr\u003eLSD Type: 2 way (1.5 \u0026amp; 2way)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Spec-F LSD feature a special flat friction clutch plates which translates to a milder initial engagement when acceleration is ON or OFF. This setup is perfect for rear wheel drive setups in circuit situations, as well as minimizing power loss for low horsepowered vehicles. The Spec-F retains the Type MZ specs yet increases smoothness in cornering due to its FFP (Flat Friction Plate). These plates increase oil passage and therefore give a very polyvalent LSD for sunday racers, but also street roads.\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":681194061851,"title":"Cusco Japan Type Mz Spec F (Super Low Final) - 1 way (1\u00262way) for Super Low final Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT)","handle":"cusco-japan-type-mz-spec-f-super-low-final-1-way-1-2way-for-super-low-final-rear-lsd-subaru-brz-zc6-applied-a-to-e-mt-at-zc6-applied-a-to-e-lsd-987-et","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 987 ET\u003cbr\u003eLSD Model: Type Mz Spec F (Super Low Final)\u003cbr\u003eLSD Type: 1 way (1\u0026amp;2way) for Super Low final\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Spec-F LSD feature a special flat friction clutch plates which translates to a milder initial engagement when acceleration is ON or OFF. This setup is perfect for rear wheel drive setups in circuit situations, as well as minimizing power loss for low horsepowered vehicles. The Spec-F retains the Type MZ specs yet increases smoothness in cornering due to its FFP (Flat Friction Plate). These plates increase oil passage and therefore give a very polyvalent LSD for sunday racers, but also street roads.\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2018-03-07T23:44:17+08:00","created_at":"2018-03-07T23:44:18+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1-way","2012","2013","2014","2015","2016","2017","at","brz-zc6-applied-c-2014-2015-na-fa20d-h4","cusco-japan","jp1","limited-slip-diffs","mt","rear","subaru","ws118"],"price":125480,"price_min":125480,"price_max":125480,"available":true,"price_varies":false,"compare_at_price":147200,"compare_at_price_min":147200,"compare_at_price_max":147200,"compare_at_price_varies":false,"variants":[{"id":6437068308507,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 987 ET","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Mz Spec F (Super Low Final) - 1 way (1\u00262way) for Super Low final Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT)","public_title":null,"options":["Default Title"],"price":125480,"weight":11000,"compare_at_price":147200,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Type_MZ_spec_F_lad_662f6b44-1dc4-4493-b7b9-143a9bcbc7ba.jpg?v=1710155152"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Type_MZ_spec_F_lad_662f6b44-1dc4-4493-b7b9-143a9bcbc7ba.jpg?v=1710155152","options":["Title"],"media":[{"alt":"Cusco Japan Type Mz Spec F (Super Low Final) - 1 way (1\u00262way) for Super Low final Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT) - ZC6 APPLIED A to E - LSD 987 ET","id":25540901961910,"position":1,"preview_image":{"aspect_ratio":0.928,"height":485,"width":450,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Type_MZ_spec_F_lad_662f6b44-1dc4-4493-b7b9-143a9bcbc7ba.jpg?v=1710155152"},"aspect_ratio":0.928,"height":485,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Type_MZ_spec_F_lad_662f6b44-1dc4-4493-b7b9-143a9bcbc7ba.jpg?v=1710155152","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 987 ET\u003cbr\u003eLSD Model: Type Mz Spec F (Super Low Final)\u003cbr\u003eLSD Type: 1 way (1\u0026amp;2way) for Super Low final\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Spec-F LSD feature a special flat friction clutch plates which translates to a milder initial engagement when acceleration is ON or OFF. This setup is perfect for rear wheel drive setups in circuit situations, as well as minimizing power loss for low horsepowered vehicles. The Spec-F retains the Type MZ specs yet increases smoothness in cornering due to its FFP (Flat Friction Plate). These plates increase oil passage and therefore give a very polyvalent LSD for sunday racers, but also street roads.\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":681193963547,"title":"Cusco Japan Type Rs Spec F (Super Low Final) - 2 way (1.5 \u0026 2way) Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT)","handle":"cusco-japan-type-rs-spec-f-super-low-final-2-way-1-5-2way-rear-lsd-subaru-brz-zc6-applied-a-to-e-mt-at-zc6-applied-a-to-e-lsd-987-lt2","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 987 LT2\u003cbr\u003eLSD Model: Type Rs Spec F (Super Low Final)\u003cbr\u003eLSD Type: 2 way (1.5 \u0026amp; 2way)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Spec-F LSD feature a special flat friction clutch plates which translates to a milder initial engagement when acceleration is ON or OFF. This setup is perfect for rear wheel drive setups in circuit situations, as well as minimizing power loss for low horsepowered vehicles. The Spec-F retains the Type Rs specs yet increases smoothness in cornering due to its FFP (Flat Friction Plate). These plates increase oil passage and therefore give a very polyvalent LSD for sunday racers, but also street roads.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2018-03-07T23:44:16+08:00","created_at":"2018-03-07T23:44:16+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["2-way","2012","2013","2014","2015","2016","2017","at","brz-zc6-applied-c-2014-2015-na-fa20d-h4","cusco-japan","jp1","limited-slip-diffs","mt","rear","subaru","ws118"],"price":125480,"price_min":125480,"price_max":125480,"available":true,"price_varies":false,"compare_at_price":147200,"compare_at_price_min":147200,"compare_at_price_max":147200,"compare_at_price_varies":false,"variants":[{"id":6437068210203,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 987 LT2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Rs Spec F (Super Low Final) - 2 way (1.5 \u0026 2way) Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT)","public_title":null,"options":["Default Title"],"price":125480,"weight":10000,"compare_at_price":147200,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/type_rs_spec_f_lds_cusco_ffd9f172-3bc7-4572-aeab-013d3ec6cf7e.jpg?v=1710155152"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/type_rs_spec_f_lds_cusco_ffd9f172-3bc7-4572-aeab-013d3ec6cf7e.jpg?v=1710155152","options":["Title"],"media":[{"alt":"Cusco Japan Type Rs Spec F (Super Low Final) - 2 way (1.5 \u0026 2way) Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT) - ZC6 APPLIED A to E - LSD 987 LT2","id":25540901863606,"position":1,"preview_image":{"aspect_ratio":0.947,"height":475,"width":450,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/type_rs_spec_f_lds_cusco_ffd9f172-3bc7-4572-aeab-013d3ec6cf7e.jpg?v=1710155152"},"aspect_ratio":0.947,"height":475,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/type_rs_spec_f_lds_cusco_ffd9f172-3bc7-4572-aeab-013d3ec6cf7e.jpg?v=1710155152","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 987 LT2\u003cbr\u003eLSD Model: Type Rs Spec F (Super Low Final)\u003cbr\u003eLSD Type: 2 way (1.5 \u0026amp; 2way)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Spec-F LSD feature a special flat friction clutch plates which translates to a milder initial engagement when acceleration is ON or OFF. This setup is perfect for rear wheel drive setups in circuit situations, as well as minimizing power loss for low horsepowered vehicles. The Spec-F retains the Type Rs specs yet increases smoothness in cornering due to its FFP (Flat Friction Plate). These plates increase oil passage and therefore give a very polyvalent LSD for sunday racers, but also street roads.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":681194127387,"title":"Cusco Japan Type Mz Spec F (Super Low Final) - 2 way (1\u00262way) Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT)","handle":"cusco-japan-type-mz-spec-f-super-low-final-2-way-1-2way-rear-lsd-subaru-brz-zc6-applied-a-to-e-mt-at-zc6-applied-a-to-e-lsd-987-et2","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 987 ET2\u003cbr\u003eLSD Model: Type Mz Spec F (Super Low Final)\u003cbr\u003eLSD Type: 2 way (1\u0026amp;2way)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Spec-F LSD feature a special flat friction clutch plates which translates to a milder initial engagement when acceleration is ON or OFF. This setup is perfect for rear wheel drive setups in circuit situations, as well as minimizing power loss for low horsepowered vehicles. The Spec-F retains the Type MZ specs yet increases smoothness in cornering due to its FFP (Flat Friction Plate). These plates increase oil passage and therefore give a very polyvalent LSD for sunday racers, but also street roads.\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2018-03-07T23:44:18+08:00","created_at":"2018-03-07T23:44:18+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["2-way","2012","2013","2014","2015","2016","2017","at","brz-zc6-applied-c-2014-2015-na-fa20d-h4","cusco-japan","jp1","limited-slip-diffs","mt","rear","subaru","ws118"],"price":125480,"price_min":125480,"price_max":125480,"available":true,"price_varies":false,"compare_at_price":147200,"compare_at_price_min":147200,"compare_at_price_max":147200,"compare_at_price_varies":false,"variants":[{"id":6437068406811,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 987 ET2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Mz Spec F (Super Low Final) - 2 way (1\u00262way) Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT)","public_title":null,"options":["Default Title"],"price":125480,"weight":11000,"compare_at_price":147200,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Type_MZ_spec_F_lad_9fe55367-c467-419d-9b90-cd3e3c1e5bed.jpg?v=1710155152"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Type_MZ_spec_F_lad_9fe55367-c467-419d-9b90-cd3e3c1e5bed.jpg?v=1710155152","options":["Title"],"media":[{"alt":"Cusco Japan Type Mz Spec F (Super Low Final) - 2 way (1\u00262way) Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT) - ZC6 APPLIED A to E - LSD 987 ET2","id":25540902092982,"position":1,"preview_image":{"aspect_ratio":0.928,"height":485,"width":450,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Type_MZ_spec_F_lad_9fe55367-c467-419d-9b90-cd3e3c1e5bed.jpg?v=1710155152"},"aspect_ratio":0.928,"height":485,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Type_MZ_spec_F_lad_9fe55367-c467-419d-9b90-cd3e3c1e5bed.jpg?v=1710155152","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 987 ET2\u003cbr\u003eLSD Model: Type Mz Spec F (Super Low Final)\u003cbr\u003eLSD Type: 2 way (1\u0026amp;2way)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Spec-F LSD feature a special flat friction clutch plates which translates to a milder initial engagement when acceleration is ON or OFF. This setup is perfect for rear wheel drive setups in circuit situations, as well as minimizing power loss for low horsepowered vehicles. The Spec-F retains the Type MZ specs yet increases smoothness in cornering due to its FFP (Flat Friction Plate). These plates increase oil passage and therefore give a very polyvalent LSD for sunday racers, but also street roads.\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":681194029083,"title":"Cusco Japan Type Rs Spec F (Super Low Final, Circuit Setting) - 1.5 way Super Low Final (Circuit Setting) Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT)","handle":"cusco-japan-type-rs-spec-f-super-low-final-circuit-setting-1-5-way-super-low-final-circuit-setting-rear-lsd-subaru-brz-zc6-applied-a-to-e-mt-at-zc6-applied-a-to-e-lsd-987-vt15","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 987 VT15\u003cbr\u003eLSD Model: Type Rs Spec F (Super Low Final, Circuit Setting)\u003cbr\u003eLSD Type: 1.5 way Super Low Final (Circuit Setting)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Spec-F LSD feature a special flat friction clutch plates which translates to a milder initial engagement when acceleration is ON or OFF. This setup is perfect for rear wheel drive setups in circuit situations, as well as minimizing power loss for low horsepowered vehicles. The Spec-F retains the Type Rs specs yet increases smoothness in cornering due to its FFP (Flat Friction Plate). These plates increase oil passage and therefore give a very polyvalent LSD for sunday racers, but also street roads.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil. The circuit spec is set to 35\/20 for maximum efficiency on track and winding road!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2018-03-07T23:44:17+08:00","created_at":"2018-03-07T23:44:17+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1-5-way","2012","2013","2014","2015","2016","2017","at","brz-zc6-applied-c-2014-2015-na-fa20d-h4","cusco-japan","jp1","limited-slip-diffs","mt","rear","subaru","ws118"],"price":125480,"price_min":125480,"price_max":125480,"available":true,"price_varies":false,"compare_at_price":147200,"compare_at_price_min":147200,"compare_at_price_max":147200,"compare_at_price_varies":false,"variants":[{"id":6437068275739,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 987 VT15","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Rs Spec F (Super Low Final, Circuit Setting) - 1.5 way Super Low Final (Circuit Setting) Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT)","public_title":null,"options":["Default Title"],"price":125480,"weight":10000,"compare_at_price":147200,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/type_rs_spec_f_lds_cusco_d8495f5b-03df-499f-82d0-b5636b8e9576.jpg?v=1710155152"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/type_rs_spec_f_lds_cusco_d8495f5b-03df-499f-82d0-b5636b8e9576.jpg?v=1710155152","options":["Title"],"media":[{"alt":"Cusco Japan Type Rs Spec F (Super Low Final, Circuit Setting) - 1.5 way Super Low Final (Circuit Setting) Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT) - ZC6 APPLIED A to E - LSD 987 VT15","id":25540901929142,"position":1,"preview_image":{"aspect_ratio":0.947,"height":475,"width":450,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/type_rs_spec_f_lds_cusco_d8495f5b-03df-499f-82d0-b5636b8e9576.jpg?v=1710155152"},"aspect_ratio":0.947,"height":475,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/type_rs_spec_f_lds_cusco_d8495f5b-03df-499f-82d0-b5636b8e9576.jpg?v=1710155152","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 987 VT15\u003cbr\u003eLSD Model: Type Rs Spec F (Super Low Final, Circuit Setting)\u003cbr\u003eLSD Type: 1.5 way Super Low Final (Circuit Setting)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Spec-F LSD feature a special flat friction clutch plates which translates to a milder initial engagement when acceleration is ON or OFF. This setup is perfect for rear wheel drive setups in circuit situations, as well as minimizing power loss for low horsepowered vehicles. The Spec-F retains the Type Rs specs yet increases smoothness in cornering due to its FFP (Flat Friction Plate). These plates increase oil passage and therefore give a very polyvalent LSD for sunday racers, but also street roads.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil. The circuit spec is set to 35\/20 for maximum efficiency on track and winding road!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":681193898011,"title":"Cusco Japan Type Rs Spec F (Super Low Final) - 2 way (1\u00262way) Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT)","handle":"cusco-japan-type-rs-spec-f-super-low-final-2-way-1-2way-rear-lsd-subaru-brz-zc6-applied-a-to-e-mt-at-zc6-applied-a-to-e-lsd-987-ft2","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 987 FT2\u003cbr\u003eLSD Model: Type Rs Spec F (Super Low Final)\u003cbr\u003eLSD Type: 2 way (1\u0026amp;2way)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Spec-F LSD feature a special flat friction clutch plates which translates to a milder initial engagement when acceleration is ON or OFF. This setup is perfect for rear wheel drive setups in circuit situations, as well as minimizing power loss for low horsepowered vehicles. The Spec-F retains the Type Rs specs yet increases smoothness in cornering due to its FFP (Flat Friction Plate). These plates increase oil passage and therefore give a very polyvalent LSD for sunday racers, but also street roads.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2018-03-07T23:44:15+08:00","created_at":"2018-03-07T23:44:15+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["2-way","2012","2013","2014","2015","2016","2017","at","brz-zc6-applied-c-2014-2015-na-fa20d-h4","cusco-japan","jp1","limited-slip-diffs","mt","rear","subaru","ws118"],"price":125480,"price_min":125480,"price_max":125480,"available":true,"price_varies":false,"compare_at_price":147200,"compare_at_price_min":147200,"compare_at_price_max":147200,"compare_at_price_varies":false,"variants":[{"id":6437068111899,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 987 FT2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Rs Spec F (Super Low Final) - 2 way (1\u00262way) Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT)","public_title":null,"options":["Default Title"],"price":125480,"weight":10000,"compare_at_price":147200,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/type_rs_spec_f_lds_cusco_160068c2-6988-4264-b2a2-d09585bf8a17.jpg?v=1710155149"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/type_rs_spec_f_lds_cusco_160068c2-6988-4264-b2a2-d09585bf8a17.jpg?v=1710155149","options":["Title"],"media":[{"alt":"Cusco Japan Type Rs Spec F (Super Low Final) - 2 way (1\u00262way) Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT) - ZC6 APPLIED A to E - LSD 987 FT2","id":25540901699766,"position":1,"preview_image":{"aspect_ratio":0.947,"height":475,"width":450,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/type_rs_spec_f_lds_cusco_160068c2-6988-4264-b2a2-d09585bf8a17.jpg?v=1710155149"},"aspect_ratio":0.947,"height":475,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/type_rs_spec_f_lds_cusco_160068c2-6988-4264-b2a2-d09585bf8a17.jpg?v=1710155149","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 987 FT2\u003cbr\u003eLSD Model: Type Rs Spec F (Super Low Final)\u003cbr\u003eLSD Type: 2 way (1\u0026amp;2way)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Spec-F LSD feature a special flat friction clutch plates which translates to a milder initial engagement when acceleration is ON or OFF. This setup is perfect for rear wheel drive setups in circuit situations, as well as minimizing power loss for low horsepowered vehicles. The Spec-F retains the Type Rs specs yet increases smoothness in cornering due to its FFP (Flat Friction Plate). These plates increase oil passage and therefore give a very polyvalent LSD for sunday racers, but also street roads.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":681193832475,"title":"Cusco Japan Type Rs Spec F (Super Low Final) - 1 way (1\u00262way) for Super Low final Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT)","handle":"cusco-japan-type-rs-spec-f-super-low-final-1-way-1-2way-for-super-low-final-rear-lsd-subaru-brz-zc6-applied-a-to-e-mt-at-zc6-applied-a-to-e-lsd-987-ft","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 987 FT\u003cbr\u003eLSD Model: Type Rs Spec F (Super Low Final)\u003cbr\u003eLSD Type: 1 way (1\u0026amp;2way) for Super Low final\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Spec-F LSD feature a special flat friction clutch plates which translates to a milder initial engagement when acceleration is ON or OFF. This setup is perfect for rear wheel drive setups in circuit situations, as well as minimizing power loss for low horsepowered vehicles. The Spec-F retains the Type Rs specs yet increases smoothness in cornering due to its FFP (Flat Friction Plate). These plates increase oil passage and therefore give a very polyvalent LSD for sunday racers, but also street roads.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2018-03-07T23:44:14+08:00","created_at":"2018-03-07T23:44:14+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1-way","2012","2013","2014","2015","2016","2017","at","brz-zc6-applied-c-2014-2015-na-fa20d-h4","cusco-japan","jp1","limited-slip-diffs","mt","rear","subaru","ws118"],"price":125480,"price_min":125480,"price_max":125480,"available":true,"price_varies":false,"compare_at_price":147200,"compare_at_price_min":147200,"compare_at_price_max":147200,"compare_at_price_varies":false,"variants":[{"id":6437068046363,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 987 FT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Rs Spec F (Super Low Final) - 1 way (1\u00262way) for Super Low final Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT)","public_title":null,"options":["Default Title"],"price":125480,"weight":10000,"compare_at_price":147200,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/type_rs_spec_f_lds_cusco_599f1c83-0466-4bcf-a5cb-60f8c3b15a86.jpg?v=1710155149"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/type_rs_spec_f_lds_cusco_599f1c83-0466-4bcf-a5cb-60f8c3b15a86.jpg?v=1710155149","options":["Title"],"media":[{"alt":"Cusco Japan Type Rs Spec F (Super Low Final) - 1 way (1\u00262way) for Super Low final Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT) - ZC6 APPLIED A to E - LSD 987 FT","id":25540901437622,"position":1,"preview_image":{"aspect_ratio":0.947,"height":475,"width":450,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/type_rs_spec_f_lds_cusco_599f1c83-0466-4bcf-a5cb-60f8c3b15a86.jpg?v=1710155149"},"aspect_ratio":0.947,"height":475,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/type_rs_spec_f_lds_cusco_599f1c83-0466-4bcf-a5cb-60f8c3b15a86.jpg?v=1710155149","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 987 FT\u003cbr\u003eLSD Model: Type Rs Spec F (Super Low Final)\u003cbr\u003eLSD Type: 1 way (1\u0026amp;2way) for Super Low final\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Spec-F LSD feature a special flat friction clutch plates which translates to a milder initial engagement when acceleration is ON or OFF. This setup is perfect for rear wheel drive setups in circuit situations, as well as minimizing power loss for low horsepowered vehicles. The Spec-F retains the Type Rs specs yet increases smoothness in cornering due to its FFP (Flat Friction Plate). These plates increase oil passage and therefore give a very polyvalent LSD for sunday racers, but also street roads.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":681193766939,"title":"Cusco Japan Type Mz (Super Low Final, Circuit Setting) - 1.5 way Super Low Final (Circuit Setting) Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT)","handle":"cusco-japan-type-mz-super-low-final-circuit-setting-1-5-way-super-low-final-circuit-setting-rear-lsd-subaru-brz-zc6-applied-a-to-e-mt-at-zc6-applied-a-to-e-lsd-987-m15","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 987 M15\u003cbr\u003eLSD Model: Type Mz (Super Low Final, Circuit Setting)\u003cbr\u003eLSD Type: 1.5 way Super Low Final (Circuit Setting)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil. The circuit spec is set to 35\/20 for maximum efficiency on track and winding road!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2018-03-07T23:44:13+08:00","created_at":"2018-03-07T23:44:14+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1-5-way","2012","2013","2014","2015","2016","2017","at","brz-zc6-applied-c-2014-2015-na-fa20d-h4","cusco-japan","jp1","limited-slip-diffs","mt","rear","subaru","ws118"],"price":125480,"price_min":125480,"price_max":125480,"available":true,"price_varies":false,"compare_at_price":147200,"compare_at_price_min":147200,"compare_at_price_max":147200,"compare_at_price_varies":false,"variants":[{"id":6437067948059,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 987 M15","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Mz (Super Low Final, Circuit Setting) - 1.5 way Super Low Final (Circuit Setting) Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT)","public_title":null,"options":["Default Title"],"price":125480,"weight":11000,"compare_at_price":147200,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_61aa3619-a5a8-4acd-a1be-f5eaaac9e229.jpg?v=1710155149"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_61aa3619-a5a8-4acd-a1be-f5eaaac9e229.jpg?v=1710155149","options":["Title"],"media":[{"alt":"Cusco Japan Type Mz (Super Low Final, Circuit Setting) - 1.5 way Super Low Final (Circuit Setting) Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT) - ZC6 APPLIED A to E - LSD 987 M15","id":25540901077174,"position":1,"preview_image":{"aspect_ratio":1.0,"height":450,"width":450,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_61aa3619-a5a8-4acd-a1be-f5eaaac9e229.jpg?v=1710155149"},"aspect_ratio":1.0,"height":450,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_61aa3619-a5a8-4acd-a1be-f5eaaac9e229.jpg?v=1710155149","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 987 M15\u003cbr\u003eLSD Model: Type Mz (Super Low Final, Circuit Setting)\u003cbr\u003eLSD Type: 1.5 way Super Low Final (Circuit Setting)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil. The circuit spec is set to 35\/20 for maximum efficiency on track and winding road!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":681193570331,"title":"Cusco Japan Type Mz (Super Low Final) - 2 way (1\u00262way) Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT)","handle":"cusco-japan-type-mz-super-low-final-2-way-1-2way-rear-lsd-subaru-brz-zc6-applied-a-to-e-mt-at-zc6-applied-a-to-e-lsd-987-e2","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 987 E2\u003cbr\u003eLSD Model: Type Mz (Super Low Final)\u003cbr\u003eLSD Type: 2 way (1\u0026amp;2way)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2018-03-07T23:44:12+08:00","created_at":"2018-03-07T23:44:12+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["2-way","2012","2013","2014","2015","2016","2017","at","brz-zc6-applied-c-2014-2015-na-fa20d-h4","cusco-japan","jp1","limited-slip-diffs","mt","rear","subaru","ws118"],"price":125480,"price_min":125480,"price_max":125480,"available":true,"price_varies":false,"compare_at_price":147200,"compare_at_price_min":147200,"compare_at_price_max":147200,"compare_at_price_varies":false,"variants":[{"id":6437067653147,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 987 E2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Mz (Super Low Final) - 2 way (1\u00262way) Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT)","public_title":null,"options":["Default Title"],"price":125480,"weight":11000,"compare_at_price":147200,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_cfa1e006-fb6d-415e-ac76-d8ea7e45b2a5.jpg?v=1710155146"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_cfa1e006-fb6d-415e-ac76-d8ea7e45b2a5.jpg?v=1710155146","options":["Title"],"media":[{"alt":"Cusco Japan Type Mz (Super Low Final) - 2 way (1\u00262way) Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT) - ZC6 APPLIED A to E - LSD 987 E2","id":25540900946102,"position":1,"preview_image":{"aspect_ratio":1.0,"height":450,"width":450,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_cfa1e006-fb6d-415e-ac76-d8ea7e45b2a5.jpg?v=1710155146"},"aspect_ratio":1.0,"height":450,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_cfa1e006-fb6d-415e-ac76-d8ea7e45b2a5.jpg?v=1710155146","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 987 E2\u003cbr\u003eLSD Model: Type Mz (Super Low Final)\u003cbr\u003eLSD Type: 2 way (1\u0026amp;2way)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":681193701403,"title":"Cusco Japan Type Mz (Super Low Final) - 2 way (1.5 \u0026 2way) Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT)","handle":"cusco-japan-type-mz-super-low-final-2-way-1-5-2way-rear-lsd-subaru-brz-zc6-applied-a-to-e-mt-at-zc6-applied-a-to-e-lsd-987-k2","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 987 K2\u003cbr\u003eLSD Model: Type Mz (Super Low Final)\u003cbr\u003eLSD Type: 2 way (1.5 \u0026amp; 2way)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2018-03-07T23:44:13+08:00","created_at":"2018-03-07T23:44:13+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["2-way","2012","2013","2014","2015","2016","2017","at","brz-zc6-applied-c-2014-2015-na-fa20d-h4","cusco-japan","jp1","limited-slip-diffs","mt","rear","subaru","ws118"],"price":125480,"price_min":125480,"price_max":125480,"available":true,"price_varies":false,"compare_at_price":147200,"compare_at_price_min":147200,"compare_at_price_max":147200,"compare_at_price_varies":false,"variants":[{"id":6437067816987,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 987 K2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Mz (Super Low Final) - 2 way (1.5 \u0026 2way) Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT)","public_title":null,"options":["Default Title"],"price":125480,"weight":11000,"compare_at_price":147200,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_64607dcb-16e0-49aa-9780-98c91698a9f5.jpg?v=1710155149"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_64607dcb-16e0-49aa-9780-98c91698a9f5.jpg?v=1710155149","options":["Title"],"media":[{"alt":"Cusco Japan Type Mz (Super Low Final) - 2 way (1.5 \u0026 2way) Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT) - ZC6 APPLIED A to E - LSD 987 K2","id":25540901011638,"position":1,"preview_image":{"aspect_ratio":1.0,"height":450,"width":450,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_64607dcb-16e0-49aa-9780-98c91698a9f5.jpg?v=1710155149"},"aspect_ratio":1.0,"height":450,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_64607dcb-16e0-49aa-9780-98c91698a9f5.jpg?v=1710155149","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 987 K2\u003cbr\u003eLSD Model: Type Mz (Super Low Final)\u003cbr\u003eLSD Type: 2 way (1.5 \u0026amp; 2way)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":681193472027,"title":"Cusco Japan Type Rs (Super Low Final, Circuit Setting) - 1.5 way Super Low Final (Circuit Setting) Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT)","handle":"cusco-japan-type-rs-super-low-final-circuit-setting-1-5-way-super-low-final-circuit-setting-rear-lsd-subaru-brz-zc6-applied-a-to-e-mt-at-zc6-applied-a-to-e-lsd-987-v15","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 987 V15\u003cbr\u003eLSD Model: Type Rs (Super Low Final, Circuit Setting)\u003cbr\u003eLSD Type: 1.5 way Super Low Final (Circuit Setting)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil. The circuit spec is set to 35\/20 for maximum efficiency on track and winding road!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2018-03-07T23:44:10+08:00","created_at":"2018-03-07T23:44:10+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1-5-way","2012","2013","2014","2015","2016","2017","at","brz-zc6-applied-c-2014-2015-na-fa20d-h4","cusco-japan","jp1","limited-slip-diffs","mt","rear","subaru","ws118"],"price":125480,"price_min":125480,"price_max":125480,"available":true,"price_varies":false,"compare_at_price":147200,"compare_at_price_min":147200,"compare_at_price_max":147200,"compare_at_price_varies":false,"variants":[{"id":6437067554843,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 987 V15","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Rs (Super Low Final, Circuit Setting) - 1.5 way Super Low Final (Circuit Setting) Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT)","public_title":null,"options":["Default Title"],"price":125480,"weight":10000,"compare_at_price":147200,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_3621adaf-5f11-4b9e-8593-5ef90af46711.jpg?v=1710155146"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_3621adaf-5f11-4b9e-8593-5ef90af46711.jpg?v=1710155146","options":["Title"],"media":[{"alt":"Cusco Japan Type Rs (Super Low Final, Circuit Setting) - 1.5 way Super Low Final (Circuit Setting) Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT) - ZC6 APPLIED A to E - LSD 987 V15","id":25540900749494,"position":1,"preview_image":{"aspect_ratio":1.0,"height":450,"width":450,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_3621adaf-5f11-4b9e-8593-5ef90af46711.jpg?v=1710155146"},"aspect_ratio":1.0,"height":450,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_3621adaf-5f11-4b9e-8593-5ef90af46711.jpg?v=1710155146","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 987 V15\u003cbr\u003eLSD Model: Type Rs (Super Low Final, Circuit Setting)\u003cbr\u003eLSD Type: 1.5 way Super Low Final (Circuit Setting)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil. The circuit spec is set to 35\/20 for maximum efficiency on track and winding road!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":681193603099,"title":"Cusco Japan Type Mz (Super Low Final) - 1.5 way (1.5\u00262way) for Super Low final Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT)","handle":"cusco-japan-type-mz-super-low-final-1-5-way-1-5-2way-for-super-low-final-rear-lsd-subaru-brz-zc6-applied-a-to-e-mt-at-zc6-applied-a-to-e-lsd-987-k15","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 987 K15\u003cbr\u003eLSD Model: Type Mz (Super Low Final)\u003cbr\u003eLSD Type: 1.5 way (1.5\u0026amp;2way) for Super Low final\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2018-03-07T23:44:12+08:00","created_at":"2018-03-07T23:44:12+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1-5-way","2012","2013","2014","2015","2016","2017","at","brz-zc6-applied-c-2014-2015-na-fa20d-h4","cusco-japan","jp1","limited-slip-diffs","mt","rear","subaru","ws118"],"price":125480,"price_min":125480,"price_max":125480,"available":true,"price_varies":false,"compare_at_price":147200,"compare_at_price_min":147200,"compare_at_price_max":147200,"compare_at_price_varies":false,"variants":[{"id":6437067718683,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 987 K15","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Mz (Super Low Final) - 1.5 way (1.5\u00262way) for Super Low final Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT)","public_title":null,"options":["Default Title"],"price":125480,"weight":11000,"compare_at_price":147200,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_5e1bd9ab-5d37-4c51-9bfa-a06bbfaa748c.jpg?v=1710155149"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_5e1bd9ab-5d37-4c51-9bfa-a06bbfaa748c.jpg?v=1710155149","options":["Title"],"media":[{"alt":"Cusco Japan Type Mz (Super Low Final) - 1.5 way (1.5\u00262way) for Super Low final Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT) - ZC6 APPLIED A to E - LSD 987 K15","id":25540900978870,"position":1,"preview_image":{"aspect_ratio":1.0,"height":450,"width":450,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_5e1bd9ab-5d37-4c51-9bfa-a06bbfaa748c.jpg?v=1710155149"},"aspect_ratio":1.0,"height":450,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_5e1bd9ab-5d37-4c51-9bfa-a06bbfaa748c.jpg?v=1710155149","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 987 K15\u003cbr\u003eLSD Model: Type Mz (Super Low Final)\u003cbr\u003eLSD Type: 1.5 way (1.5\u0026amp;2way) for Super Low final\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":681193439259,"title":"Cusco Japan Type Rs (Super Low Final) - 2 way (1.5 \u0026 2way) Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT)","handle":"cusco-japan-type-rs-super-low-final-2-way-1-5-2way-rear-lsd-subaru-brz-zc6-applied-a-to-e-mt-at-zc6-applied-a-to-e-lsd-987-l2","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 987 L2\u003cbr\u003eLSD Model: Type Rs (Super Low Final)\u003cbr\u003eLSD Type: 2 way (1.5 \u0026amp; 2way)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2018-03-07T23:44:10+08:00","created_at":"2018-03-07T23:44:10+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["2-way","2012","2013","2014","2015","2016","2017","at","brz-zc6-applied-c-2014-2015-na-fa20d-h4","cusco-japan","jp1","limited-slip-diffs","mt","rear","subaru","ws118"],"price":125480,"price_min":125480,"price_max":125480,"available":true,"price_varies":false,"compare_at_price":147200,"compare_at_price_min":147200,"compare_at_price_max":147200,"compare_at_price_varies":false,"variants":[{"id":6437067489307,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 987 L2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Rs (Super Low Final) - 2 way (1.5 \u0026 2way) Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT)","public_title":null,"options":["Default Title"],"price":125480,"weight":10000,"compare_at_price":147200,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_0045c06e-e790-4a92-9014-a954a71a44b7.jpg?v=1710155146"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_0045c06e-e790-4a92-9014-a954a71a44b7.jpg?v=1710155146","options":["Title"],"media":[{"alt":"Cusco Japan Type Rs (Super Low Final) - 2 way (1.5 \u0026 2way) Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT) - ZC6 APPLIED A to E - LSD 987 L2","id":25540900323510,"position":1,"preview_image":{"aspect_ratio":1.0,"height":450,"width":450,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_0045c06e-e790-4a92-9014-a954a71a44b7.jpg?v=1710155146"},"aspect_ratio":1.0,"height":450,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_0045c06e-e790-4a92-9014-a954a71a44b7.jpg?v=1710155146","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 987 L2\u003cbr\u003eLSD Model: Type Rs (Super Low Final)\u003cbr\u003eLSD Type: 2 way (1.5 \u0026amp; 2way)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":681193504795,"title":"Cusco Japan Type Mz (Super Low Final) - 1 way (1\u00262way) for Super Low final Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT)","handle":"cusco-japan-type-mz-super-low-final-1-way-1-2way-for-super-low-final-rear-lsd-subaru-brz-zc6-applied-a-to-e-mt-at-zc6-applied-a-to-e-lsd-987-e","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 987 E\u003cbr\u003eLSD Model: Type Mz (Super Low Final)\u003cbr\u003eLSD Type: 1 way (1\u0026amp;2way) for Super Low final\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2018-03-07T23:44:11+08:00","created_at":"2018-03-07T23:44:11+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1-way","2012","2013","2014","2015","2016","2017","at","brz-zc6-applied-c-2014-2015-na-fa20d-h4","cusco-japan","jp1","limited-slip-diffs","mt","rear","subaru","ws118"],"price":125480,"price_min":125480,"price_max":125480,"available":true,"price_varies":false,"compare_at_price":147200,"compare_at_price_min":147200,"compare_at_price_max":147200,"compare_at_price_varies":false,"variants":[{"id":6437067620379,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 987 E","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Mz (Super Low Final) - 1 way (1\u00262way) for Super Low final Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT)","public_title":null,"options":["Default Title"],"price":125480,"weight":11000,"compare_at_price":147200,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_bffde86a-0a0b-416b-979b-b2b7f5f3b396.jpg?v=1710155146"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_bffde86a-0a0b-416b-979b-b2b7f5f3b396.jpg?v=1710155146","options":["Title"],"media":[{"alt":"Cusco Japan Type Mz (Super Low Final) - 1 way (1\u00262way) for Super Low final Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT) - ZC6 APPLIED A to E - LSD 987 E","id":25540900880566,"position":1,"preview_image":{"aspect_ratio":1.0,"height":450,"width":450,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_bffde86a-0a0b-416b-979b-b2b7f5f3b396.jpg?v=1710155146"},"aspect_ratio":1.0,"height":450,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_bffde86a-0a0b-416b-979b-b2b7f5f3b396.jpg?v=1710155146","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 987 E\u003cbr\u003eLSD Model: Type Mz (Super Low Final)\u003cbr\u003eLSD Type: 1 way (1\u0026amp;2way) for Super Low final\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":681193406491,"title":"Cusco Japan Type Rs (Super Low Final) - 1.5 way (1.5\u00262way) for Super Low final Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT)","handle":"cusco-japan-type-rs-super-low-final-1-5-way-1-5-2way-for-super-low-final-rear-lsd-subaru-brz-zc6-applied-a-to-e-mt-at-zc6-applied-a-to-e-lsd-987-l15","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 987 L15\u003cbr\u003eLSD Model: Type Rs (Super Low Final)\u003cbr\u003eLSD Type: 1.5 way (1.5\u0026amp;2way) for Super Low final\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2018-03-07T23:44:09+08:00","created_at":"2018-03-07T23:44:09+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1-5-way","2012","2013","2014","2015","2016","2017","at","brz-zc6-applied-c-2014-2015-na-fa20d-h4","cusco-japan","jp1","limited-slip-diffs","mt","rear","subaru","ws118"],"price":125480,"price_min":125480,"price_max":125480,"available":true,"price_varies":false,"compare_at_price":147200,"compare_at_price_min":147200,"compare_at_price_max":147200,"compare_at_price_varies":false,"variants":[{"id":6437067423771,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 987 L15","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Rs (Super Low Final) - 1.5 way (1.5\u00262way) for Super Low final Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT)","public_title":null,"options":["Default Title"],"price":125480,"weight":10000,"compare_at_price":147200,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_4eacff56-a846-4e4a-ac31-3c8f49a2cfa9.jpg?v=1710155146"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_4eacff56-a846-4e4a-ac31-3c8f49a2cfa9.jpg?v=1710155146","options":["Title"],"media":[{"alt":"Cusco Japan Type Rs (Super Low Final) - 1.5 way (1.5\u00262way) for Super Low final Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT) - ZC6 APPLIED A to E - LSD 987 L15","id":25540899471542,"position":1,"preview_image":{"aspect_ratio":1.0,"height":450,"width":450,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_4eacff56-a846-4e4a-ac31-3c8f49a2cfa9.jpg?v=1710155146"},"aspect_ratio":1.0,"height":450,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_4eacff56-a846-4e4a-ac31-3c8f49a2cfa9.jpg?v=1710155146","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 987 L15\u003cbr\u003eLSD Model: Type Rs (Super Low Final)\u003cbr\u003eLSD Type: 1.5 way (1.5\u0026amp;2way) for Super Low final\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":681193373723,"title":"Cusco Japan Type Rs (Super Low Final) - 2 way (1\u00262way) Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT)","handle":"cusco-japan-type-rs-super-low-final-2-way-1-2way-rear-lsd-subaru-brz-zc6-applied-a-to-e-mt-at-zc6-applied-a-to-e-lsd-987-f2","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 987 F2\u003cbr\u003eLSD Model: Type Rs (Super Low Final)\u003cbr\u003eLSD Type: 2 way (1\u0026amp;2way)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2018-03-07T23:44:08+08:00","created_at":"2018-03-07T23:44:08+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["2-way","2012","2013","2014","2015","2016","2017","at","brz-zc6-applied-c-2014-2015-na-fa20d-h4","cusco-japan","jp1","limited-slip-diffs","mt","rear","subaru","ws118"],"price":125480,"price_min":125480,"price_max":125480,"available":true,"price_varies":false,"compare_at_price":147200,"compare_at_price_min":147200,"compare_at_price_max":147200,"compare_at_price_varies":false,"variants":[{"id":6437067391003,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 987 F2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Rs (Super Low Final) - 2 way (1\u00262way) Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT)","public_title":null,"options":["Default Title"],"price":125480,"weight":10000,"compare_at_price":147200,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_4c94a06a-93e9-4eaf-8f2b-671653dabfe1.jpg?v=1710155143"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_4c94a06a-93e9-4eaf-8f2b-671653dabfe1.jpg?v=1710155143","options":["Title"],"media":[{"alt":"Cusco Japan Type Rs (Super Low Final) - 2 way (1\u00262way) Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT) - ZC6 APPLIED A to E - LSD 987 F2","id":25540897112246,"position":1,"preview_image":{"aspect_ratio":1.0,"height":450,"width":450,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_4c94a06a-93e9-4eaf-8f2b-671653dabfe1.jpg?v=1710155143"},"aspect_ratio":1.0,"height":450,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_4c94a06a-93e9-4eaf-8f2b-671653dabfe1.jpg?v=1710155143","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 987 F2\u003cbr\u003eLSD Model: Type Rs (Super Low Final)\u003cbr\u003eLSD Type: 2 way (1\u0026amp;2way)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":681193340955,"title":"Cusco Japan Type Rs (Super Low Final) - 1 way (1\u00262way) for Super Low final Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT)","handle":"cusco-japan-type-rs-super-low-final-1-way-1-2way-for-super-low-final-rear-lsd-subaru-brz-zc6-applied-a-to-e-mt-at-zc6-applied-a-to-e-lsd-987-f","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 987 F\u003cbr\u003eLSD Model: Type Rs (Super Low Final)\u003cbr\u003eLSD Type: 1 way (1\u0026amp;2way) for Super Low final\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2018-03-07T23:44:08+08:00","created_at":"2018-03-07T23:44:08+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1-way","2012","2013","2014","2015","2016","2017","at","brz-zc6-applied-c-2014-2015-na-fa20d-h4","cusco-japan","jp1","limited-slip-diffs","mt","rear","subaru","ws118"],"price":125480,"price_min":125480,"price_max":125480,"available":true,"price_varies":false,"compare_at_price":147200,"compare_at_price_min":147200,"compare_at_price_max":147200,"compare_at_price_varies":false,"variants":[{"id":6437067358235,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 987 F","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Rs (Super Low Final) - 1 way (1\u00262way) for Super Low final Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT)","public_title":null,"options":["Default Title"],"price":125480,"weight":10000,"compare_at_price":147200,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_de9f5f02-02eb-4d7b-9dc1-85a839147909.jpg?v=1710155143"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_de9f5f02-02eb-4d7b-9dc1-85a839147909.jpg?v=1710155143","options":["Title"],"media":[{"alt":"Cusco Japan Type Rs (Super Low Final) - 1 way (1\u00262way) for Super Low final Rear LSD - Subaru BRZ - ZC6 (Applied A to E) (MT,AT) - ZC6 APPLIED A to E - LSD 987 F","id":25540897079478,"position":1,"preview_image":{"aspect_ratio":1.0,"height":450,"width":450,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_de9f5f02-02eb-4d7b-9dc1-85a839147909.jpg?v=1710155143"},"aspect_ratio":1.0,"height":450,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_de9f5f02-02eb-4d7b-9dc1-85a839147909.jpg?v=1710155143","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 987 F\u003cbr\u003eLSD Model: Type Rs (Super Low Final)\u003cbr\u003eLSD Type: 1 way (1\u0026amp;2way) for Super Low final\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eBRZ | ZC6 APPLIED A | 2012-2013 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED B | 2013-2014 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED C | 2014-2015 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED D | 2015-2016 | NA | FA20D | H4\u003cbr\u003eBRZ | ZC6 APPLIED E | 2016-2018 | NA | FA20D | H4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}