Mishimoto

{"id":562001117211,"title":"Mishimoto - BMW E90\/E92 w\/ N52 Engine Silicone Intake Boot - Red - E82 E88 E90 E91 E92 E93 - MMHOSE-E90-06IHRD","handle":"mishimoto-bmw-e90-e92-w-n52-engine-silicone-intake-boot-red-e82-e88-e90-e91-e92-e93-mmhose-e90-06ihrd","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-E90-06IHRD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for BMW E90\/E92 and E82\/E88 vehicles with the N52 engine\u003cbr\u003eRemoves the resonator found in the stock intake boot, provides a slight increase in engine tone\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eInstalls in under 1 hour\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eFits with single stage or 3-stage intake manifolds\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eAvailable in blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Intake Hose\u003cbr\u003e(2) Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eLength 7.8\"\u003cbr\u003eThis product will only fit BMW E90 \/ E92 \/ E91 \/ E92 \/ E93 \/ E82 \/ E88 vehicles with the N52 engine\u003cbr\u003eMax Temp 330°F\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto N52 silicone intake boot is constructed of five layers of silicone with steel reinforcement rings for maximum durability. The steel reinforcement rings keep this hose from collapsing when under load, keeping your engine supplied with adequate airflow. The stock N52 intake boot has a resonator that BMW included to keep the N52 quiet. We tossed that resonator to the curb for a nice increase in engine and intake tone. This N52 intake boot fits with the stock airbox and single stage or 3-stage intake manifolds. The silicone construction will provide you with a long service life, and the Mishimoto Lifetime Warranty will make sure your intake boot is always leak free!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for BMW E90\/E92 and E82\/E88 vehicles with the N52 engine\u003cbr\u003eRemoves the resonator found in the stock intake boot, provides a slight increase in engine tone\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eInstalls in under 1 hour\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eFits with single stage or 3-stage intake manifolds\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eAvailable in blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Intake Hose\u003cbr\u003e(2) Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eLength 7.8\"\u003cbr\u003eThis product will only fit BMW E90 \/ E92 \/ E91 \/ E92 \/ E93 \/ E82 \/ E88 vehicles with the N52 engine\u003cbr\u003eMax Temp 330°F\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto N52 silicone intake boot is constructed of five layers of silicone with steel reinforcement rings for maximum durability. The steel reinforcement rings keep this hose from collapsing when under load, keeping your engine supplied with adequate airflow. The stock N52 intake boot has a resonator that BMW included to keep the N52 quiet. We tossed that resonator to the curb for a nice increase in engine and intake tone. This N52 intake boot fits with the stock airbox and single stage or 3-stage intake manifolds. The silicone construction will provide you with a long service life, and the Mishimoto Lifetime Warranty will make sure your intake boot is always leak free!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:26:46+08:00","created_at":"2018-01-24T23:26:47+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["1-series-125i-e82-2008-2011-na-n52b30-i6","1-series-125i-e88-2008-2011-na-n52b30-i6","2004","2005","2006","2007","2008","2009","2010","2011","3-series-cabriolet-e93-2004-2011-na-i6","3-series-coupe-e92-2004-2011-na-i6","3-series-e90-2004-2011-na-i6","3-series-estate-e91-2005-2011-na-i6","bmw","intake","intake-hoses","mishimoto","us1","ws136"],"price":11500,"price_min":11500,"price_max":11500,"available":true,"price_varies":false,"compare_at_price":16800,"compare_at_price_min":16800,"compare_at_price_max":16800,"compare_at_price_varies":false,"variants":[{"id":5990400655387,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-E90-06IHRD","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - BMW E90\/E92 w\/ N52 Engine Silicone Intake Boot - Red - E82 E88 E90 E91 E92 E93 - MMHOSE-E90-06IHRD","public_title":null,"options":["Default Title"],"price":11500,"weight":4499,"compare_at_price":16800,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-E90-06IHRD.jpg?v=1710154181"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-E90-06IHRD.jpg?v=1710154181","options":["Title"],"media":[{"alt":"Mishimoto - BMW E90\/E92 w\/ N52 Engine Silicone Intake Boot - Red - E82 E88 E90 E91 E92 E93 - MMHOSE-E90-06IHRD - Rzcrewgarage","id":1351405666401,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-E90-06IHRD.jpg?v=1710154181"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-E90-06IHRD.jpg?v=1710154181","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-E90-06IHRD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for BMW E90\/E92 and E82\/E88 vehicles with the N52 engine\u003cbr\u003eRemoves the resonator found in the stock intake boot, provides a slight increase in engine tone\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eInstalls in under 1 hour\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eFits with single stage or 3-stage intake manifolds\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eAvailable in blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Intake Hose\u003cbr\u003e(2) Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eLength 7.8\"\u003cbr\u003eThis product will only fit BMW E90 \/ E92 \/ E91 \/ E92 \/ E93 \/ E82 \/ E88 vehicles with the N52 engine\u003cbr\u003eMax Temp 330°F\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto N52 silicone intake boot is constructed of five layers of silicone with steel reinforcement rings for maximum durability. The steel reinforcement rings keep this hose from collapsing when under load, keeping your engine supplied with adequate airflow. The stock N52 intake boot has a resonator that BMW included to keep the N52 quiet. We tossed that resonator to the curb for a nice increase in engine and intake tone. This N52 intake boot fits with the stock airbox and single stage or 3-stage intake manifolds. The silicone construction will provide you with a long service life, and the Mishimoto Lifetime Warranty will make sure your intake boot is always leak free!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for BMW E90\/E92 and E82\/E88 vehicles with the N52 engine\u003cbr\u003eRemoves the resonator found in the stock intake boot, provides a slight increase in engine tone\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eInstalls in under 1 hour\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eFits with single stage or 3-stage intake manifolds\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eAvailable in blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Intake Hose\u003cbr\u003e(2) Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eLength 7.8\"\u003cbr\u003eThis product will only fit BMW E90 \/ E92 \/ E91 \/ E92 \/ E93 \/ E82 \/ E88 vehicles with the N52 engine\u003cbr\u003eMax Temp 330°F\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto N52 silicone intake boot is constructed of five layers of silicone with steel reinforcement rings for maximum durability. The steel reinforcement rings keep this hose from collapsing when under load, keeping your engine supplied with adequate airflow. The stock N52 intake boot has a resonator that BMW included to keep the N52 quiet. We tossed that resonator to the curb for a nice increase in engine and intake tone. This N52 intake boot fits with the stock airbox and single stage or 3-stage intake manifolds. The silicone construction will provide you with a long service life, and the Mishimoto Lifetime Warranty will make sure your intake boot is always leak free!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":562001084443,"title":"Mishimoto - BMW E90\/E92 w\/ N52 Engine Silicone Intake Boot - Blue - E82 E88 E90 E91 E92 E93 - MMHOSE-E90-06IHBL","handle":"mishimoto-bmw-e90-e92-w-n52-engine-silicone-intake-boot-blue-e82-e88-e90-e91-e92-e93-mmhose-e90-06ihbl","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-E90-06IHBL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for BMW E90\/E92 and E82\/E88 vehicles with the N52 engine\u003cbr\u003eRemoves the resonator found in the stock intake boot, provides a slight increase in engine tone\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eInstalls in under 1 hour\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eFits with single stage or 3-stage intake manifolds\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eAvailable in blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Intake Hose\u003cbr\u003e(2) Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eLength 7.8\"\u003cbr\u003eThis product will only fit BMW E90 \/ E92 \/ E91 \/ E92 \/ E93 \/ E82 \/ E88 vehicles with the N52 engine\u003cbr\u003eMax Temp 330°F\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto N52 silicone intake boot is constructed of five layers of silicone with steel reinforcement rings for maximum durability. The steel reinforcement rings keep this hose from collapsing when under load, keeping your engine supplied with adequate airflow. The stock N52 intake boot has a resonator that BMW included to keep the N52 quiet. We tossed that resonator to the curb for a nice increase in engine and intake tone. This N52 intake boot fits with the stock airbox and single stage or 3-stage intake manifolds. The silicone construction will provide you with a long service life, and the Mishimoto Lifetime Warranty will make sure your intake boot is always leak free!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for BMW E90\/E92 and E82\/E88 vehicles with the N52 engine\u003cbr\u003eRemoves the resonator found in the stock intake boot, provides a slight increase in engine tone\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eInstalls in under 1 hour\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eFits with single stage or 3-stage intake manifolds\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eAvailable in blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Intake Hose\u003cbr\u003e(2) Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eLength 7.8\"\u003cbr\u003eThis product will only fit BMW E90 \/ E92 \/ E91 \/ E92 \/ E93 \/ E82 \/ E88 vehicles with the N52 engine\u003cbr\u003eMax Temp 330°F\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto N52 silicone intake boot is constructed of five layers of silicone with steel reinforcement rings for maximum durability. The steel reinforcement rings keep this hose from collapsing when under load, keeping your engine supplied with adequate airflow. The stock N52 intake boot has a resonator that BMW included to keep the N52 quiet. We tossed that resonator to the curb for a nice increase in engine and intake tone. This N52 intake boot fits with the stock airbox and single stage or 3-stage intake manifolds. The silicone construction will provide you with a long service life, and the Mishimoto Lifetime Warranty will make sure your intake boot is always leak free!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:26:46+08:00","created_at":"2018-01-24T23:26:46+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["1-series-125i-e82-2008-2011-na-n52b30-i6","1-series-125i-e88-2008-2011-na-n52b30-i6","2004","2005","2006","2007","2008","2009","2010","2011","3-series-cabriolet-e93-2004-2011-na-i6","3-series-coupe-e92-2004-2011-na-i6","3-series-e90-2004-2011-na-i6","3-series-estate-e91-2005-2011-na-i6","bmw","intake","intake-hoses","mishimoto","us1","ws136"],"price":11500,"price_min":11500,"price_max":11500,"available":true,"price_varies":false,"compare_at_price":16800,"compare_at_price_min":16800,"compare_at_price_max":16800,"compare_at_price_varies":false,"variants":[{"id":5990400622619,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-E90-06IHBL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - BMW E90\/E92 w\/ N52 Engine Silicone Intake Boot - Blue - E82 E88 E90 E91 E92 E93 - MMHOSE-E90-06IHBL","public_title":null,"options":["Default Title"],"price":11500,"weight":4499,"compare_at_price":16800,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-E90-06IHBL.jpg?v=1710154181"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-E90-06IHBL.jpg?v=1710154181","options":["Title"],"media":[{"alt":"Mishimoto - BMW E90\/E92 w\/ N52 Engine Silicone Intake Boot - Blue - E82 E88 E90 E91 E92 E93 - MMHOSE-E90-06IHBL - Rzcrewgarage","id":1351405633633,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-E90-06IHBL.jpg?v=1710154181"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-E90-06IHBL.jpg?v=1710154181","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-E90-06IHBL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for BMW E90\/E92 and E82\/E88 vehicles with the N52 engine\u003cbr\u003eRemoves the resonator found in the stock intake boot, provides a slight increase in engine tone\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eInstalls in under 1 hour\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eFits with single stage or 3-stage intake manifolds\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eAvailable in blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Intake Hose\u003cbr\u003e(2) Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eLength 7.8\"\u003cbr\u003eThis product will only fit BMW E90 \/ E92 \/ E91 \/ E92 \/ E93 \/ E82 \/ E88 vehicles with the N52 engine\u003cbr\u003eMax Temp 330°F\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto N52 silicone intake boot is constructed of five layers of silicone with steel reinforcement rings for maximum durability. The steel reinforcement rings keep this hose from collapsing when under load, keeping your engine supplied with adequate airflow. The stock N52 intake boot has a resonator that BMW included to keep the N52 quiet. We tossed that resonator to the curb for a nice increase in engine and intake tone. This N52 intake boot fits with the stock airbox and single stage or 3-stage intake manifolds. The silicone construction will provide you with a long service life, and the Mishimoto Lifetime Warranty will make sure your intake boot is always leak free!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for BMW E90\/E92 and E82\/E88 vehicles with the N52 engine\u003cbr\u003eRemoves the resonator found in the stock intake boot, provides a slight increase in engine tone\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eInstalls in under 1 hour\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eFits with single stage or 3-stage intake manifolds\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eAvailable in blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Intake Hose\u003cbr\u003e(2) Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eLength 7.8\"\u003cbr\u003eThis product will only fit BMW E90 \/ E92 \/ E91 \/ E92 \/ E93 \/ E82 \/ E88 vehicles with the N52 engine\u003cbr\u003eMax Temp 330°F\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mishimoto N52 silicone intake boot is constructed of five layers of silicone with steel reinforcement rings for maximum durability. The steel reinforcement rings keep this hose from collapsing when under load, keeping your engine supplied with adequate airflow. The stock N52 intake boot has a resonator that BMW included to keep the N52 quiet. We tossed that resonator to the curb for a nice increase in engine and intake tone. This N52 intake boot fits with the stock airbox and single stage or 3-stage intake manifolds. The silicone construction will provide you with a long service life, and the Mishimoto Lifetime Warranty will make sure your intake boot is always leak free!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561992040475,"title":"Mishimoto - Mishimoto BMW E36 E46 Oil Line Fitting Kit - E36 E46 - MMOCF-BMW","handle":"mishimoto-mishimoto-bmw-e36-e46-oil-line-fitting-kit-e36-e46-mmocf-bmw","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOCF-BMW\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Allows for use of -10AN fittings for custom\u003cbr\u003e100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate\u003cbr\u003eIncludes durable stock\u003cbr\u003eBMW O-rings for leak-free installation\u003cbr\u003eProvides additional engine bay space for applications with an oil accumulator or supercharger setup\u003cbr\u003eIncluded as part of the Mishimoto BMW E46 M3 Oil Cooler Kit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial \u003cbr\u003eFITTING CLAMP MATERIAL\u003cbr\u003e303 Stainless Steel\u003cbr\u003e\u003cbr\u003e-10AN FITTINGS MATERIAL\u003cbr\u003e6061 Aluminum\u003cbr\u003e\u003cbr\u003eNote This kit works with vehicles which have stock oil cooler housings.\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes S54, N54, N55\u003cbr\u003eChassis Codes E36, E46\u003cbr\u003eInstall Torque Specs 10 ft\/lbs for Oil Line Fitting Kit bolt\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eOverall Height 1.3\" \u003cbr\u003eOverall Length 2.44\" \u003cbr\u003eOverall Width 1.51\" (assembled) \u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Fitting Clamp \u003cbr\u003e(2) -10AN Fittings \u003cbr\u003e(2) BMW Oil O-rings \u003cbr\u003e(1) M8 x 1.25 x 25mm Button-Head Bolt \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eInstall a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Pair this fitting kit with some Mishimoto stainless steel oil lines and one of our stacked-plate oil coolers to create a complete cooling setup for your BMW. As with all our products, the Mishimoto BMW Oil Line Fitting Kit includes our Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Allows for use of -10AN fittings for custom\u003cbr\u003e100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate\u003cbr\u003eIncludes durable stock\u003cbr\u003eBMW O-rings for leak-free installation\u003cbr\u003eProvides additional engine bay space for applications with an oil accumulator or supercharger setup\u003cbr\u003eIncluded as part of the Mishimoto BMW E46 M3 Oil Cooler Kit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial \u003cbr\u003eFITTING CLAMP MATERIAL\u003cbr\u003e303 Stainless Steel\u003cbr\u003e\u003cbr\u003e-10AN FITTINGS MATERIAL\u003cbr\u003e6061 Aluminum\u003cbr\u003e\u003cbr\u003eNote This kit works with vehicles which have stock oil cooler housings.\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes S54, N54, N55\u003cbr\u003eChassis Codes E36, E46\u003cbr\u003eInstall Torque Specs 10 ft\/lbs for Oil Line Fitting Kit bolt\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eOverall Height 1.3\" \u003cbr\u003eOverall Length 2.44\" \u003cbr\u003eOverall Width 1.51\" (assembled) \u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Fitting Clamp \u003cbr\u003e(2) -10AN Fittings \u003cbr\u003e(2) BMW Oil O-rings \u003cbr\u003e(1) M8 x 1.25 x 25mm Button-Head Bolt \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eInstall a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Pair this fitting kit with some Mishimoto stainless steel oil lines and one of our stacked-plate oil coolers to create a complete cooling setup for your BMW. As with all our products, the Mishimoto BMW Oil Line Fitting Kit includes our Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:25:09+08:00","created_at":"2018-01-24T23:25:09+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["1-series-e82-2007-2013-tc-i6","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","3-series-cabriolet-e93-2004-2011-na-i6","3-series-cabriolet-e93-2007-2013-tc-i6","3-series-coupe-e92-2004-2011-na-i6","3-series-coupe-e92-2007-2013-tc-i6","3-series-e90-2004-2011-na-i6","3-series-e90-2007-2013-tc-i6","bmw","car-specific","cooling","mishimoto","oil-cooler-accessories","oil-coolers","us1","ws122"],"price":11620,"price_min":11620,"price_max":11620,"available":true,"price_varies":false,"compare_at_price":13600,"compare_at_price_min":13600,"compare_at_price_max":13600,"compare_at_price_varies":false,"variants":[{"id":5990389317659,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOCF-BMW","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Mishimoto BMW E36 E46 Oil Line Fitting Kit - E36 E46 - MMOCF-BMW","public_title":null,"options":["Default Title"],"price":11620,"weight":4177,"compare_at_price":13600,"inventory_quantity":19,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOCF-BMW_dc87dcb0-50fa-432d-a3a6-4835b75229d0.jpg?v=1710154108"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOCF-BMW_dc87dcb0-50fa-432d-a3a6-4835b75229d0.jpg?v=1710154108","options":["Title"],"media":[{"alt":"Mishimoto - Mishimoto BMW E36 E46 Oil Line Fitting Kit - E36 E46 - MMOCF-BMW - Rzcrewgarage","id":1351401635937,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOCF-BMW_dc87dcb0-50fa-432d-a3a6-4835b75229d0.jpg?v=1710154108"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOCF-BMW_dc87dcb0-50fa-432d-a3a6-4835b75229d0.jpg?v=1710154108","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOCF-BMW\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Allows for use of -10AN fittings for custom\u003cbr\u003e100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate\u003cbr\u003eIncludes durable stock\u003cbr\u003eBMW O-rings for leak-free installation\u003cbr\u003eProvides additional engine bay space for applications with an oil accumulator or supercharger setup\u003cbr\u003eIncluded as part of the Mishimoto BMW E46 M3 Oil Cooler Kit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial \u003cbr\u003eFITTING CLAMP MATERIAL\u003cbr\u003e303 Stainless Steel\u003cbr\u003e\u003cbr\u003e-10AN FITTINGS MATERIAL\u003cbr\u003e6061 Aluminum\u003cbr\u003e\u003cbr\u003eNote This kit works with vehicles which have stock oil cooler housings.\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes S54, N54, N55\u003cbr\u003eChassis Codes E36, E46\u003cbr\u003eInstall Torque Specs 10 ft\/lbs for Oil Line Fitting Kit bolt\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eOverall Height 1.3\" \u003cbr\u003eOverall Length 2.44\" \u003cbr\u003eOverall Width 1.51\" (assembled) \u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Fitting Clamp \u003cbr\u003e(2) -10AN Fittings \u003cbr\u003e(2) BMW Oil O-rings \u003cbr\u003e(1) M8 x 1.25 x 25mm Button-Head Bolt \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eInstall a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Pair this fitting kit with some Mishimoto stainless steel oil lines and one of our stacked-plate oil coolers to create a complete cooling setup for your BMW. As with all our products, the Mishimoto BMW Oil Line Fitting Kit includes our Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Allows for use of -10AN fittings for custom\u003cbr\u003e100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate\u003cbr\u003eIncludes durable stock\u003cbr\u003eBMW O-rings for leak-free installation\u003cbr\u003eProvides additional engine bay space for applications with an oil accumulator or supercharger setup\u003cbr\u003eIncluded as part of the Mishimoto BMW E46 M3 Oil Cooler Kit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial \u003cbr\u003eFITTING CLAMP MATERIAL\u003cbr\u003e303 Stainless Steel\u003cbr\u003e\u003cbr\u003e-10AN FITTINGS MATERIAL\u003cbr\u003e6061 Aluminum\u003cbr\u003e\u003cbr\u003eNote This kit works with vehicles which have stock oil cooler housings.\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes S54, N54, N55\u003cbr\u003eChassis Codes E36, E46\u003cbr\u003eInstall Torque Specs 10 ft\/lbs for Oil Line Fitting Kit bolt\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eOverall Height 1.3\" \u003cbr\u003eOverall Length 2.44\" \u003cbr\u003eOverall Width 1.51\" (assembled) \u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Fitting Clamp \u003cbr\u003e(2) -10AN Fittings \u003cbr\u003e(2) BMW Oil O-rings \u003cbr\u003e(1) M8 x 1.25 x 25mm Button-Head Bolt \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eInstall a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Pair this fitting kit with some Mishimoto stainless steel oil lines and one of our stacked-plate oil coolers to create a complete cooling setup for your BMW. As with all our products, the Mishimoto BMW Oil Line Fitting Kit includes our Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561990533147,"title":"Mishimoto - Mishimoto BMW E82 E90 E92 E93 Oil Line Fitting Kit - E82 E90 E92 E93 - MMOCF-BMW","handle":"mishimoto-mishimoto-bmw-e82-e90-e92-e93-oil-line-fitting-kit-e82-e90-e92-e93-mmocf-bmw","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOCF-BMW\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Allows for use of -10AN fittings for custom\u003cbr\u003e100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate\u003cbr\u003eIncludes durable stock\u003cbr\u003eBMW O-rings for leak-free installation\u003cbr\u003eProvides additional engine bay space for applications with an oil accumulator or supercharger setup\u003cbr\u003eIncluded as part of the Mishimoto BMW E46 M3 Oil Cooler Kit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial \u003cbr\u003eFITTING CLAMP MATERIAL\u003cbr\u003e303 Stainless Steel\u003cbr\u003e\u003cbr\u003e-10AN FITTINGS MATERIAL\u003cbr\u003e6061 Aluminum\u003cbr\u003e\u003cbr\u003eNote This kit works with vehicles which have stock oil cooler housings.\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes S54, N54, N55\u003cbr\u003eChassis Codes E82, E90, E92, E93\u003cbr\u003eInstall Torque Specs 10 ft\/lbs for Oil Line Fitting Kit bolt\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eOverall Height 1.3\" \u003cbr\u003eOverall Length 2.44\" \u003cbr\u003eOverall Width 1.51\" (assembled) \u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Fitting Clamp \u003cbr\u003e(2) -10AN Fittings \u003cbr\u003e(2) BMW Oil O-rings \u003cbr\u003e(1) M8 x 1.25 x 25mm Button-Head Bolt \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eInstall a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Pair this fitting kit with some Mishimoto stainless steel oil lines and one of our stacked-plate oil coolers to create a complete cooling setup for your BMW. As with all our products, the Mishimoto BMW Oil Line Fitting Kit includes our Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Allows for use of -10AN fittings for custom\u003cbr\u003e100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate\u003cbr\u003eIncludes durable stock\u003cbr\u003eBMW O-rings for leak-free installation\u003cbr\u003eProvides additional engine bay space for applications with an oil accumulator or supercharger setup\u003cbr\u003eIncluded as part of the Mishimoto BMW E46 M3 Oil Cooler Kit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial \u003cbr\u003eFITTING CLAMP MATERIAL\u003cbr\u003e303 Stainless Steel\u003cbr\u003e\u003cbr\u003e-10AN FITTINGS MATERIAL\u003cbr\u003e6061 Aluminum\u003cbr\u003e\u003cbr\u003eNote This kit works with vehicles which have stock oil cooler housings.\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes S54, N54, N55\u003cbr\u003eChassis Codes E82, E90, E92, E93\u003cbr\u003eInstall Torque Specs 10 ft\/lbs for Oil Line Fitting Kit bolt\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eOverall Height 1.3\" \u003cbr\u003eOverall Length 2.44\" \u003cbr\u003eOverall Width 1.51\" (assembled) \u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Fitting Clamp \u003cbr\u003e(2) -10AN Fittings \u003cbr\u003e(2) BMW Oil O-rings \u003cbr\u003e(1) M8 x 1.25 x 25mm Button-Head Bolt \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eInstall a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Pair this fitting kit with some Mishimoto stainless steel oil lines and one of our stacked-plate oil coolers to create a complete cooling setup for your BMW. As with all our products, the Mishimoto BMW Oil Line Fitting Kit includes our Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:53+08:00","created_at":"2018-01-24T23:24:54+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["1-series-e82-2007-2013-tc-i6","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","3-series-cabriolet-e93-2004-2011-na-i6","3-series-cabriolet-e93-2007-2013-tc-i6","3-series-coupe-e92-2004-2011-na-i6","3-series-coupe-e92-2007-2013-tc-i6","3-series-e90-2004-2011-na-i6","3-series-e90-2007-2013-tc-i6","bmw","car-specific","cooling","mishimoto","oil-cooler-accessories","oil-coolers","us1","ws122"],"price":11620,"price_min":11620,"price_max":11620,"available":true,"price_varies":false,"compare_at_price":13600,"compare_at_price_min":13600,"compare_at_price_max":13600,"compare_at_price_varies":false,"variants":[{"id":5990387712027,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOCF-BMW","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Mishimoto BMW E82 E90 E92 E93 Oil Line Fitting Kit - E82 E90 E92 E93 - MMOCF-BMW","public_title":null,"options":["Default Title"],"price":11620,"weight":4177,"compare_at_price":13600,"inventory_quantity":19,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOCF-BMW.jpg?v=1710154097"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOCF-BMW.jpg?v=1710154097","options":["Title"],"media":[{"alt":"Mishimoto - Mishimoto BMW E82 E90 E92 E93 Oil Line Fitting Kit - E82 E90 E92 E93 - MMOCF-BMW - Rzcrewgarage","id":1351401144417,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOCF-BMW.jpg?v=1710154097"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOCF-BMW.jpg?v=1710154097","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOCF-BMW\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Allows for use of -10AN fittings for custom\u003cbr\u003e100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate\u003cbr\u003eIncludes durable stock\u003cbr\u003eBMW O-rings for leak-free installation\u003cbr\u003eProvides additional engine bay space for applications with an oil accumulator or supercharger setup\u003cbr\u003eIncluded as part of the Mishimoto BMW E46 M3 Oil Cooler Kit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial \u003cbr\u003eFITTING CLAMP MATERIAL\u003cbr\u003e303 Stainless Steel\u003cbr\u003e\u003cbr\u003e-10AN FITTINGS MATERIAL\u003cbr\u003e6061 Aluminum\u003cbr\u003e\u003cbr\u003eNote This kit works with vehicles which have stock oil cooler housings.\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes S54, N54, N55\u003cbr\u003eChassis Codes E82, E90, E92, E93\u003cbr\u003eInstall Torque Specs 10 ft\/lbs for Oil Line Fitting Kit bolt\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eOverall Height 1.3\" \u003cbr\u003eOverall Length 2.44\" \u003cbr\u003eOverall Width 1.51\" (assembled) \u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Fitting Clamp \u003cbr\u003e(2) -10AN Fittings \u003cbr\u003e(2) BMW Oil O-rings \u003cbr\u003e(1) M8 x 1.25 x 25mm Button-Head Bolt \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eInstall a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Pair this fitting kit with some Mishimoto stainless steel oil lines and one of our stacked-plate oil coolers to create a complete cooling setup for your BMW. As with all our products, the Mishimoto BMW Oil Line Fitting Kit includes our Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Allows for use of -10AN fittings for custom\u003cbr\u003e100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate\u003cbr\u003eIncludes durable stock\u003cbr\u003eBMW O-rings for leak-free installation\u003cbr\u003eProvides additional engine bay space for applications with an oil accumulator or supercharger setup\u003cbr\u003eIncluded as part of the Mishimoto BMW E46 M3 Oil Cooler Kit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial \u003cbr\u003eFITTING CLAMP MATERIAL\u003cbr\u003e303 Stainless Steel\u003cbr\u003e\u003cbr\u003e-10AN FITTINGS MATERIAL\u003cbr\u003e6061 Aluminum\u003cbr\u003e\u003cbr\u003eNote This kit works with vehicles which have stock oil cooler housings.\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes S54, N54, N55\u003cbr\u003eChassis Codes E82, E90, E92, E93\u003cbr\u003eInstall Torque Specs 10 ft\/lbs for Oil Line Fitting Kit bolt\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eOverall Height 1.3\" \u003cbr\u003eOverall Length 2.44\" \u003cbr\u003eOverall Width 1.51\" (assembled) \u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Fitting Clamp \u003cbr\u003e(2) -10AN Fittings \u003cbr\u003e(2) BMW Oil O-rings \u003cbr\u003e(1) M8 x 1.25 x 25mm Button-Head Bolt \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eInstall a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Pair this fitting kit with some Mishimoto stainless steel oil lines and one of our stacked-plate oil coolers to create a complete cooling setup for your BMW. As with all our products, the Mishimoto BMW Oil Line Fitting Kit includes our Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}