Mitsubishi

{"id":6792967225526,"title":"HKS Coilover Suspension Full Kit Hipermax S - Mitsubishi Lancer Evolution V CP9A (1998-1998)","handle":"hks-coilover-suspension-full-kit-hipermax-s-mitsubishi-lancer-evolution-v-cp9a-1998-1998-80300-am003","description":"SPECIFICATIONS:\u003cbr\u003eManufacturer: HKS\u003cbr\u003eAdjustability: Dampening and Height Adjustable\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eSeries: Hipermax S\u003cbr\u003eSpring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: 69(7)\u003cbr\u003e- Rear: 59(6)\u003cbr\u003eFree Height (mm):\u003cbr\u003e- Front: 200(Barrel)\u003cbr\u003e- Rear: 200\u003cbr\u003eRecommended Range to change Spring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: ±20 ( 2 )\u003cbr\u003e- Rear: ±20 ( 2 )\u003cbr\u003eDamper Force (Rebound\/Damping):\u003cbr\u003e- Front: 868\/515\u003cbr\u003e- Rear: 682\/348 \u003cbr\u003e- Note: Damping force is at piston speed 0.1m\/sec.\u003cbr\u003eDefault position of Dial:\u003cbr\u003e- Front: 15\u003cbr\u003e- Rear: 15\u003cbr\u003eDamping Force Adjustment:\u003cbr\u003e- Front: 30 Steps\u003cbr\u003e- Rear: 30 Steps\u003cbr\u003eHeight Adjustable Lower Bracket:\u003cbr\u003e- Front: Yes\u003cbr\u003e- Rear: Yes\u003cbr\u003eUpper Mount:\u003cbr\u003e- Front: Pillow Ball Camber Mount\u003cbr\u003e- Rear: Rubber Bush\u003cbr\u003eDamper Layout:\u003cbr\u003e- Front: Inverted\u003cbr\u003e- Rear: Normal\u003cbr\u003eDamper\/Spring Layout:\u003cbr\u003e- Front: Coilover\u003cbr\u003e- Rear: Coilover\u003cbr\u003eDamping force adjustable with Wire:\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: N\/A\u003cbr\u003eHelper Spring (Spring Rate N\/mm):\u003cbr\u003e- Front: 19.8\u003cbr\u003e- Rear: 19.8\u003cbr\u003eRide Height Specification -\u003cbr\u003e-Maximum Adjustable Range High - Low (mm):\u003cbr\u003e-- Front: -1 ～ -74 \u003cbr\u003e-- Rear: -4 ～ -64\u003cbr\u003e-Drivable Range High - Low (mm):\u003cbr\u003e-- Front: -1 ～ -74\u003cbr\u003e-- Rear: -4 ～ -64\u003cbr\u003e\u003cbr\u003eThis set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV GT release this series has unified the many different street based Hipermax merits and further improved this new flagship series for the ultimate combination of driving performance and comfort performance, Driving Comfort. With exception of the circuit specific HIpermax IV SP series all other series will be replaced with this all-mighty spec. Specifically developed to provide the ultimate in harmony between performance handling and control with supreme ride comfort yet capable of high level performance on circuit as well. With massive adjustability in ride height and damper settings these items are an excellent choice for the daily driver to look and perform best under any kind of circumstance.\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual shape may differ.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution V - CP9A (1998-1998) 4G63\u003c!--split--\u003e","published_at":"2021-06-16T14:05:01+08:00","created_at":"2021-06-16T14:05:01+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["1998","coilovers-and-springs","dampening-and-height-adjustable","hks","jp1","lancer-evolution-v-cp9a-1998-1999-tc-4g63t-2nd-gen-i4","mitsubishi","ws122"],"price":183222,"price_min":183222,"price_max":183222,"available":true,"price_varies":false,"compare_at_price":234900,"compare_at_price_min":234900,"compare_at_price_max":234900,"compare_at_price_varies":false,"variants":[{"id":39946783555766,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80300-AM003","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Coilover Suspension Full Kit Hipermax S - Mitsubishi Lancer Evolution V CP9A (1998-1998)","public_title":null,"options":["Default Title"],"price":183222,"weight":30000,"compare_at_price":234900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-mitsubishi-lancer-evolution-v-cp9a-1998-1998-rzcrew.jpg?v=1710324714"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-mitsubishi-lancer-evolution-v-cp9a-1998-1998-rzcrew.jpg?v=1710324714","options":["Title"],"media":[{"alt":"HKS Coilover Suspension Full Kit Hipermax S - Mitsubishi Lancer Evolution V CP9A (1998-1998) - 80300-AM003 - Rzcrewgarage","id":22891567939766,"position":1,"preview_image":{"aspect_ratio":1.21,"height":496,"width":600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-mitsubishi-lancer-evolution-v-cp9a-1998-1998-rzcrew.jpg?v=1710324714"},"aspect_ratio":1.21,"height":496,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-mitsubishi-lancer-evolution-v-cp9a-1998-1998-rzcrew.jpg?v=1710324714","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS:\u003cbr\u003eManufacturer: HKS\u003cbr\u003eAdjustability: Dampening and Height Adjustable\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eSeries: Hipermax S\u003cbr\u003eSpring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: 69(7)\u003cbr\u003e- Rear: 59(6)\u003cbr\u003eFree Height (mm):\u003cbr\u003e- Front: 200(Barrel)\u003cbr\u003e- Rear: 200\u003cbr\u003eRecommended Range to change Spring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: ±20 ( 2 )\u003cbr\u003e- Rear: ±20 ( 2 )\u003cbr\u003eDamper Force (Rebound\/Damping):\u003cbr\u003e- Front: 868\/515\u003cbr\u003e- Rear: 682\/348 \u003cbr\u003e- Note: Damping force is at piston speed 0.1m\/sec.\u003cbr\u003eDefault position of Dial:\u003cbr\u003e- Front: 15\u003cbr\u003e- Rear: 15\u003cbr\u003eDamping Force Adjustment:\u003cbr\u003e- Front: 30 Steps\u003cbr\u003e- Rear: 30 Steps\u003cbr\u003eHeight Adjustable Lower Bracket:\u003cbr\u003e- Front: Yes\u003cbr\u003e- Rear: Yes\u003cbr\u003eUpper Mount:\u003cbr\u003e- Front: Pillow Ball Camber Mount\u003cbr\u003e- Rear: Rubber Bush\u003cbr\u003eDamper Layout:\u003cbr\u003e- Front: Inverted\u003cbr\u003e- Rear: Normal\u003cbr\u003eDamper\/Spring Layout:\u003cbr\u003e- Front: Coilover\u003cbr\u003e- Rear: Coilover\u003cbr\u003eDamping force adjustable with Wire:\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: N\/A\u003cbr\u003eHelper Spring (Spring Rate N\/mm):\u003cbr\u003e- Front: 19.8\u003cbr\u003e- Rear: 19.8\u003cbr\u003eRide Height Specification -\u003cbr\u003e-Maximum Adjustable Range High - Low (mm):\u003cbr\u003e-- Front: -1 ～ -74 \u003cbr\u003e-- Rear: -4 ～ -64\u003cbr\u003e-Drivable Range High - Low (mm):\u003cbr\u003e-- Front: -1 ～ -74\u003cbr\u003e-- Rear: -4 ～ -64\u003cbr\u003e\u003cbr\u003eThis set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV GT release this series has unified the many different street based Hipermax merits and further improved this new flagship series for the ultimate combination of driving performance and comfort performance, Driving Comfort. With exception of the circuit specific HIpermax IV SP series all other series will be replaced with this all-mighty spec. Specifically developed to provide the ultimate in harmony between performance handling and control with supreme ride comfort yet capable of high level performance on circuit as well. With massive adjustability in ride height and damper settings these items are an excellent choice for the daily driver to look and perform best under any kind of circumstance.\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual shape may differ.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution V - CP9A (1998-1998) 4G63\u003c!--split--\u003e"}

{"id":6792967258294,"title":"HKS Coilover Suspension Full Kit Hipermax S - Mitsubishi Lancer Evolution VI CP9A (1999-1999)","handle":"hks-coilover-suspension-full-kit-hipermax-s-mitsubishi-lancer-evolution-vi-cp9a-1999-1999-80300-am003","description":"SPECIFICATIONS:\u003cbr\u003eManufacturer: HKS\u003cbr\u003eAdjustability: Dampening and Height Adjustable\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eSeries: Hipermax S\u003cbr\u003eSpring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: 69(7)\u003cbr\u003e- Rear: 59(6)\u003cbr\u003eFree Height (mm):\u003cbr\u003e- Front: 200(Barrel)\u003cbr\u003e- Rear: 200\u003cbr\u003eRecommended Range to change Spring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: ±20 ( 2 )\u003cbr\u003e- Rear: ±20 ( 2 )\u003cbr\u003eDamper Force (Rebound\/Damping):\u003cbr\u003e- Front: 868\/515\u003cbr\u003e- Rear: 682\/348 \u003cbr\u003e- Note: Damping force is at piston speed 0.1m\/sec.\u003cbr\u003eDefault position of Dial:\u003cbr\u003e- Front: 15\u003cbr\u003e- Rear: 15\u003cbr\u003eDamping Force Adjustment:\u003cbr\u003e- Front: 30 Steps\u003cbr\u003e- Rear: 30 Steps\u003cbr\u003eHeight Adjustable Lower Bracket:\u003cbr\u003e- Front: Yes\u003cbr\u003e- Rear: Yes\u003cbr\u003eUpper Mount:\u003cbr\u003e- Front: Pillow Ball Camber Mount\u003cbr\u003e- Rear: Rubber Bush\u003cbr\u003eDamper Layout:\u003cbr\u003e- Front: Inverted\u003cbr\u003e- Rear: Normal\u003cbr\u003eDamper\/Spring Layout:\u003cbr\u003e- Front: Coilover\u003cbr\u003e- Rear: Coilover\u003cbr\u003eDamping force adjustable with Wire:\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: N\/A\u003cbr\u003eHelper Spring (Spring Rate N\/mm):\u003cbr\u003e- Front: 19.8\u003cbr\u003e- Rear: 19.8\u003cbr\u003eRide Height Specification -\u003cbr\u003e-Maximum Adjustable Range High - Low (mm):\u003cbr\u003e-- Front: -1 ～ -74 \u003cbr\u003e-- Rear: -4 ～ -64\u003cbr\u003e-Drivable Range High - Low (mm):\u003cbr\u003e-- Front: -1 ～ -74\u003cbr\u003e-- Rear: -4 ～ -64\u003cbr\u003e\u003cbr\u003eThis set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV GT release this series has unified the many different street based Hipermax merits and further improved this new flagship series for the ultimate combination of driving performance and comfort performance, Driving Comfort. With exception of the circuit specific HIpermax IV SP series all other series will be replaced with this all-mighty spec. Specifically developed to provide the ultimate in harmony between performance handling and control with supreme ride comfort yet capable of high level performance on circuit as well. With massive adjustability in ride height and damper settings these items are an excellent choice for the daily driver to look and perform best under any kind of circumstance.\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual shape may differ.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution VI - CP9A (1999-1999) 4G63\u003c!--split--\u003e","published_at":"2021-06-16T14:05:02+08:00","created_at":"2021-06-16T14:05:03+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["1999","coilovers-and-springs","dampening-and-height-adjustable","hks","jp1","lancer-evolution-vi-cp9a-1999-2001-tc-4g63t-2nd-gen-i4","mitsubishi","ws122"],"price":183222,"price_min":183222,"price_max":183222,"available":true,"price_varies":false,"compare_at_price":234900,"compare_at_price_min":234900,"compare_at_price_max":234900,"compare_at_price_varies":false,"variants":[{"id":39946783588534,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80300-AM003","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Coilover Suspension Full Kit Hipermax S - Mitsubishi Lancer Evolution VI CP9A (1999-1999)","public_title":null,"options":["Default Title"],"price":183222,"weight":30000,"compare_at_price":234900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-mitsubishi-lancer-evolution-vi-cp9a-1999-1999-rzcrew.jpg?v=1710324714"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-mitsubishi-lancer-evolution-vi-cp9a-1999-1999-rzcrew.jpg?v=1710324714","options":["Title"],"media":[{"alt":"HKS Coilover Suspension Full Kit Hipermax S - Mitsubishi Lancer Evolution VI CP9A (1999-1999) - 80300-AM003 - Rzcrewgarage","id":22891568201910,"position":1,"preview_image":{"aspect_ratio":1.21,"height":496,"width":600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-mitsubishi-lancer-evolution-vi-cp9a-1999-1999-rzcrew.jpg?v=1710324714"},"aspect_ratio":1.21,"height":496,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-mitsubishi-lancer-evolution-vi-cp9a-1999-1999-rzcrew.jpg?v=1710324714","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS:\u003cbr\u003eManufacturer: HKS\u003cbr\u003eAdjustability: Dampening and Height Adjustable\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eSeries: Hipermax S\u003cbr\u003eSpring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: 69(7)\u003cbr\u003e- Rear: 59(6)\u003cbr\u003eFree Height (mm):\u003cbr\u003e- Front: 200(Barrel)\u003cbr\u003e- Rear: 200\u003cbr\u003eRecommended Range to change Spring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: ±20 ( 2 )\u003cbr\u003e- Rear: ±20 ( 2 )\u003cbr\u003eDamper Force (Rebound\/Damping):\u003cbr\u003e- Front: 868\/515\u003cbr\u003e- Rear: 682\/348 \u003cbr\u003e- Note: Damping force is at piston speed 0.1m\/sec.\u003cbr\u003eDefault position of Dial:\u003cbr\u003e- Front: 15\u003cbr\u003e- Rear: 15\u003cbr\u003eDamping Force Adjustment:\u003cbr\u003e- Front: 30 Steps\u003cbr\u003e- Rear: 30 Steps\u003cbr\u003eHeight Adjustable Lower Bracket:\u003cbr\u003e- Front: Yes\u003cbr\u003e- Rear: Yes\u003cbr\u003eUpper Mount:\u003cbr\u003e- Front: Pillow Ball Camber Mount\u003cbr\u003e- Rear: Rubber Bush\u003cbr\u003eDamper Layout:\u003cbr\u003e- Front: Inverted\u003cbr\u003e- Rear: Normal\u003cbr\u003eDamper\/Spring Layout:\u003cbr\u003e- Front: Coilover\u003cbr\u003e- Rear: Coilover\u003cbr\u003eDamping force adjustable with Wire:\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: N\/A\u003cbr\u003eHelper Spring (Spring Rate N\/mm):\u003cbr\u003e- Front: 19.8\u003cbr\u003e- Rear: 19.8\u003cbr\u003eRide Height Specification -\u003cbr\u003e-Maximum Adjustable Range High - Low (mm):\u003cbr\u003e-- Front: -1 ～ -74 \u003cbr\u003e-- Rear: -4 ～ -64\u003cbr\u003e-Drivable Range High - Low (mm):\u003cbr\u003e-- Front: -1 ～ -74\u003cbr\u003e-- Rear: -4 ～ -64\u003cbr\u003e\u003cbr\u003eThis set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV GT release this series has unified the many different street based Hipermax merits and further improved this new flagship series for the ultimate combination of driving performance and comfort performance, Driving Comfort. With exception of the circuit specific HIpermax IV SP series all other series will be replaced with this all-mighty spec. Specifically developed to provide the ultimate in harmony between performance handling and control with supreme ride comfort yet capable of high level performance on circuit as well. With massive adjustability in ride height and damper settings these items are an excellent choice for the daily driver to look and perform best under any kind of circumstance.\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual shape may differ.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution VI - CP9A (1999-1999) 4G63\u003c!--split--\u003e"}

{"id":6792967389366,"title":"HKS Coilover Suspension Full Kit Hipermax S - Mitsubishi Lancer Evolution VII CT9A (2001-2002)","handle":"hks-coilover-suspension-full-kit-hipermax-s-mitsubishi-lancer-evolution-vii-ct9a-2001-2002-80300-am002","description":"SPECIFICATIONS:\u003cbr\u003eManufacturer: HKS\u003cbr\u003eAdjustability: Dampening and Height Adjustable\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eCT9A\u003cbr\u003eSeries: Hipermax S\u003cbr\u003eSpring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: 78(8)\u003cbr\u003e- Rear: 59(6)\u003cbr\u003eFree Height (mm):\u003cbr\u003e- Front: 250 (Barrel)\u003cbr\u003e- Rear: 200\u003cbr\u003eRecommended Range to change Spring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: ±20 ( 2 )\u003cbr\u003e- Rear: ±20 ( 2 )\u003cbr\u003eDamper Force (Rebound\/Damping):\u003cbr\u003e- Front: 888\/476 \u003cbr\u003e- Rear: 693\/373 \u003cbr\u003e- Note: Damping force is at piston speed 0.1m\/sec.\u003cbr\u003eDefault position of Dial:\u003cbr\u003e- Front: 15\u003cbr\u003e- Rear: 15\u003cbr\u003eDamping Force Adjustment:\u003cbr\u003e- Front: 30 Steps\u003cbr\u003e- Rear: 30 Steps\u003cbr\u003eHeight Adjustable Lower Bracket:\u003cbr\u003e- Front: Yes\u003cbr\u003e- Rear: Yes\u003cbr\u003eUpper Mount:\u003cbr\u003e- Front: Rubber Bush\u003cbr\u003e- Rear: Rubber Bush\u003cbr\u003eDamper Layout:\u003cbr\u003e- Front: Inverted\u003cbr\u003e- Rear: Normal\u003cbr\u003eDamper\/Spring Layout:\u003cbr\u003e- Front: Coilover\u003cbr\u003e- Rear: Coilover\u003cbr\u003eDamping force adjustable with Wire:\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: N\/A\u003cbr\u003eHelper Spring (Spring Rate N\/mm):\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: 19.8\u003cbr\u003eRide Height Specification -\u003cbr\u003e-Maximum Adjustable Range High - Low (mm):\u003cbr\u003e-- Front: -8 ～ -59 \u003cbr\u003e-- Rear: -5 ～ -71 \u003cbr\u003e-Drivable Range High - Low (mm):\u003cbr\u003e-- Front: -8 ～ -59\u003cbr\u003e-- Rear: -5 ～ -71\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- CT9A Lancer Evolution VIII: Vehicles 02\/03~01\/04 only\u003cbr\u003e- CT9W: Vehicles 09\/08~09\/07 only\u003cbr\u003e\u003cbr\u003eThis set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV GT release this series has unified the many different street based Hipermax merits and further improved this new flagship series for the ultimate combination of driving performance and comfort performance, Driving Comfort. With exception of the circuit specific HIpermax IV SP series all other series will be replaced with this all-mighty spec. Specifically developed to provide the ultimate in harmony between performance handling and control with supreme ride comfort yet capable of high level performance on circuit as well. With massive adjustability in ride height and damper settings these items are an excellent choice for the daily driver to look and perform best under any kind of circumstance.\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual shape may differ.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution VII - CT9A (2001-2002) 4G63\u003c!--split--\u003e","published_at":"2021-06-16T14:05:05+08:00","created_at":"2021-06-16T14:05:06+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2001","2002","coilovers-and-springs","dampening-and-height-adjustable","hks","jp1","lancer-evolution-vii-ct9a-2001-2002-tc-4g63t-3rd-gen-i4","mitsubishi","ws122"],"price":179478,"price_min":179478,"price_max":179478,"available":true,"price_varies":false,"compare_at_price":230100,"compare_at_price_min":230100,"compare_at_price_max":230100,"compare_at_price_varies":false,"variants":[{"id":39946783719606,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80300-AM002","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Coilover Suspension Full Kit Hipermax S - Mitsubishi Lancer Evolution VII CT9A (2001-2002)","public_title":null,"options":["Default Title"],"price":179478,"weight":30000,"compare_at_price":230100,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-mitsubishi-lancer-evolution-vii-ct9a-2001-2002-rzcrew.jpg?v=1710324714"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-mitsubishi-lancer-evolution-vii-ct9a-2001-2002-rzcrew.jpg?v=1710324714","options":["Title"],"media":[{"alt":"HKS Coilover Suspension Full Kit Hipermax S - Mitsubishi Lancer Evolution VII CT9A (2001-2002) - 80300-AM002 - Rzcrewgarage","id":22891569053878,"position":1,"preview_image":{"aspect_ratio":1.21,"height":496,"width":600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-mitsubishi-lancer-evolution-vii-ct9a-2001-2002-rzcrew.jpg?v=1710324714"},"aspect_ratio":1.21,"height":496,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-mitsubishi-lancer-evolution-vii-ct9a-2001-2002-rzcrew.jpg?v=1710324714","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS:\u003cbr\u003eManufacturer: HKS\u003cbr\u003eAdjustability: Dampening and Height Adjustable\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eCT9A\u003cbr\u003eSeries: Hipermax S\u003cbr\u003eSpring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: 78(8)\u003cbr\u003e- Rear: 59(6)\u003cbr\u003eFree Height (mm):\u003cbr\u003e- Front: 250 (Barrel)\u003cbr\u003e- Rear: 200\u003cbr\u003eRecommended Range to change Spring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: ±20 ( 2 )\u003cbr\u003e- Rear: ±20 ( 2 )\u003cbr\u003eDamper Force (Rebound\/Damping):\u003cbr\u003e- Front: 888\/476 \u003cbr\u003e- Rear: 693\/373 \u003cbr\u003e- Note: Damping force is at piston speed 0.1m\/sec.\u003cbr\u003eDefault position of Dial:\u003cbr\u003e- Front: 15\u003cbr\u003e- Rear: 15\u003cbr\u003eDamping Force Adjustment:\u003cbr\u003e- Front: 30 Steps\u003cbr\u003e- Rear: 30 Steps\u003cbr\u003eHeight Adjustable Lower Bracket:\u003cbr\u003e- Front: Yes\u003cbr\u003e- Rear: Yes\u003cbr\u003eUpper Mount:\u003cbr\u003e- Front: Rubber Bush\u003cbr\u003e- Rear: Rubber Bush\u003cbr\u003eDamper Layout:\u003cbr\u003e- Front: Inverted\u003cbr\u003e- Rear: Normal\u003cbr\u003eDamper\/Spring Layout:\u003cbr\u003e- Front: Coilover\u003cbr\u003e- Rear: Coilover\u003cbr\u003eDamping force adjustable with Wire:\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: N\/A\u003cbr\u003eHelper Spring (Spring Rate N\/mm):\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: 19.8\u003cbr\u003eRide Height Specification -\u003cbr\u003e-Maximum Adjustable Range High - Low (mm):\u003cbr\u003e-- Front: -8 ～ -59 \u003cbr\u003e-- Rear: -5 ～ -71 \u003cbr\u003e-Drivable Range High - Low (mm):\u003cbr\u003e-- Front: -8 ～ -59\u003cbr\u003e-- Rear: -5 ～ -71\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- CT9A Lancer Evolution VIII: Vehicles 02\/03~01\/04 only\u003cbr\u003e- CT9W: Vehicles 09\/08~09\/07 only\u003cbr\u003e\u003cbr\u003eThis set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV GT release this series has unified the many different street based Hipermax merits and further improved this new flagship series for the ultimate combination of driving performance and comfort performance, Driving Comfort. With exception of the circuit specific HIpermax IV SP series all other series will be replaced with this all-mighty spec. Specifically developed to provide the ultimate in harmony between performance handling and control with supreme ride comfort yet capable of high level performance on circuit as well. With massive adjustability in ride height and damper settings these items are an excellent choice for the daily driver to look and perform best under any kind of circumstance.\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual shape may differ.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution VII - CT9A (2001-2002) 4G63\u003c!--split--\u003e"}

{"id":6792967487670,"title":"HKS Coilover Suspension Full Kit Hipermax S - Mitsubishi Lancer Evolution VIII CT9A (2003-2005)","handle":"hks-coilover-suspension-full-kit-hipermax-s-mitsubishi-lancer-evolution-viii-ct9a-2003-2005-80300-am002","description":"SPECIFICATIONS:\u003cbr\u003eManufacturer: HKS\u003cbr\u003eAdjustability: Dampening and Height Adjustable\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eCT9A\u003cbr\u003eSeries: Hipermax S\u003cbr\u003eSpring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: 78(8)\u003cbr\u003e- Rear: 59(6)\u003cbr\u003eFree Height (mm):\u003cbr\u003e- Front: 250 (Barrel)\u003cbr\u003e- Rear: 200\u003cbr\u003eRecommended Range to change Spring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: ±20 ( 2 )\u003cbr\u003e- Rear: ±20 ( 2 )\u003cbr\u003eDamper Force (Rebound\/Damping):\u003cbr\u003e- Front: 888\/476 \u003cbr\u003e- Rear: 693\/373 \u003cbr\u003e- Note: Damping force is at piston speed 0.1m\/sec.\u003cbr\u003eDefault position of Dial:\u003cbr\u003e- Front: 15\u003cbr\u003e- Rear: 15\u003cbr\u003eDamping Force Adjustment:\u003cbr\u003e- Front: 30 Steps\u003cbr\u003e- Rear: 30 Steps\u003cbr\u003eHeight Adjustable Lower Bracket:\u003cbr\u003e- Front: Yes\u003cbr\u003e- Rear: Yes\u003cbr\u003eUpper Mount:\u003cbr\u003e- Front: Rubber Bush\u003cbr\u003e- Rear: Rubber Bush\u003cbr\u003eDamper Layout:\u003cbr\u003e- Front: Inverted\u003cbr\u003e- Rear: Normal\u003cbr\u003eDamper\/Spring Layout:\u003cbr\u003e- Front: Coilover\u003cbr\u003e- Rear: Coilover\u003cbr\u003eDamping force adjustable with Wire:\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: N\/A\u003cbr\u003eHelper Spring (Spring Rate N\/mm):\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: 19.8\u003cbr\u003eRide Height Specification -\u003cbr\u003e-Maximum Adjustable Range High - Low (mm):\u003cbr\u003e-- Front: -8 ～ -59 \u003cbr\u003e-- Rear: -5 ～ -71 \u003cbr\u003e-Drivable Range High - Low (mm):\u003cbr\u003e-- Front: -8 ～ -59\u003cbr\u003e-- Rear: -5 ～ -71\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- CT9A Lancer Evolution VIII: Vehicles 02\/03~01\/04 only\u003cbr\u003e- CT9W: Vehicles 09\/08~09\/07 only\u003cbr\u003e\u003cbr\u003eThis set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV GT release this series has unified the many different street based Hipermax merits and further improved this new flagship series for the ultimate combination of driving performance and comfort performance, Driving Comfort. With exception of the circuit specific HIpermax IV SP series all other series will be replaced with this all-mighty spec. Specifically developed to provide the ultimate in harmony between performance handling and control with supreme ride comfort yet capable of high level performance on circuit as well. With massive adjustability in ride height and damper settings these items are an excellent choice for the daily driver to look and perform best under any kind of circumstance.\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual shape may differ.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution VIII - CT9A (2003-2005) 4G63\u003c!--split--\u003e","published_at":"2021-06-16T14:05:07+08:00","created_at":"2021-06-16T14:05:07+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2003","2004","2005","coilovers-and-springs","dampening-and-height-adjustable","hks","jp1","lancer-evolution-viii-ct9a-2003-2005-tc-4g63t-mivec-i4","mitsubishi","ws122"],"price":179478,"price_min":179478,"price_max":179478,"available":true,"price_varies":false,"compare_at_price":230100,"compare_at_price_min":230100,"compare_at_price_max":230100,"compare_at_price_varies":false,"variants":[{"id":39946783817910,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80300-AM002","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Coilover Suspension Full Kit Hipermax S - Mitsubishi Lancer Evolution VIII CT9A (2003-2005)","public_title":null,"options":["Default Title"],"price":179478,"weight":30000,"compare_at_price":230100,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-mitsubishi-lancer-evolution-viii-ct9a-2003-2005-rzcrew.jpg?v=1710324712"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-mitsubishi-lancer-evolution-viii-ct9a-2003-2005-rzcrew.jpg?v=1710324712","options":["Title"],"media":[{"alt":"HKS Coilover Suspension Full Kit Hipermax S - Mitsubishi Lancer Evolution VIII CT9A (2003-2005) - 80300-AM002 - Rzcrewgarage","id":22891569283254,"position":1,"preview_image":{"aspect_ratio":1.21,"height":496,"width":600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-mitsubishi-lancer-evolution-viii-ct9a-2003-2005-rzcrew.jpg?v=1710324712"},"aspect_ratio":1.21,"height":496,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-mitsubishi-lancer-evolution-viii-ct9a-2003-2005-rzcrew.jpg?v=1710324712","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS:\u003cbr\u003eManufacturer: HKS\u003cbr\u003eAdjustability: Dampening and Height Adjustable\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eCT9A\u003cbr\u003eSeries: Hipermax S\u003cbr\u003eSpring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: 78(8)\u003cbr\u003e- Rear: 59(6)\u003cbr\u003eFree Height (mm):\u003cbr\u003e- Front: 250 (Barrel)\u003cbr\u003e- Rear: 200\u003cbr\u003eRecommended Range to change Spring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: ±20 ( 2 )\u003cbr\u003e- Rear: ±20 ( 2 )\u003cbr\u003eDamper Force (Rebound\/Damping):\u003cbr\u003e- Front: 888\/476 \u003cbr\u003e- Rear: 693\/373 \u003cbr\u003e- Note: Damping force is at piston speed 0.1m\/sec.\u003cbr\u003eDefault position of Dial:\u003cbr\u003e- Front: 15\u003cbr\u003e- Rear: 15\u003cbr\u003eDamping Force Adjustment:\u003cbr\u003e- Front: 30 Steps\u003cbr\u003e- Rear: 30 Steps\u003cbr\u003eHeight Adjustable Lower Bracket:\u003cbr\u003e- Front: Yes\u003cbr\u003e- Rear: Yes\u003cbr\u003eUpper Mount:\u003cbr\u003e- Front: Rubber Bush\u003cbr\u003e- Rear: Rubber Bush\u003cbr\u003eDamper Layout:\u003cbr\u003e- Front: Inverted\u003cbr\u003e- Rear: Normal\u003cbr\u003eDamper\/Spring Layout:\u003cbr\u003e- Front: Coilover\u003cbr\u003e- Rear: Coilover\u003cbr\u003eDamping force adjustable with Wire:\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: N\/A\u003cbr\u003eHelper Spring (Spring Rate N\/mm):\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: 19.8\u003cbr\u003eRide Height Specification -\u003cbr\u003e-Maximum Adjustable Range High - Low (mm):\u003cbr\u003e-- Front: -8 ～ -59 \u003cbr\u003e-- Rear: -5 ～ -71 \u003cbr\u003e-Drivable Range High - Low (mm):\u003cbr\u003e-- Front: -8 ～ -59\u003cbr\u003e-- Rear: -5 ～ -71\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- CT9A Lancer Evolution VIII: Vehicles 02\/03~01\/04 only\u003cbr\u003e- CT9W: Vehicles 09\/08~09\/07 only\u003cbr\u003e\u003cbr\u003eThis set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV GT release this series has unified the many different street based Hipermax merits and further improved this new flagship series for the ultimate combination of driving performance and comfort performance, Driving Comfort. With exception of the circuit specific HIpermax IV SP series all other series will be replaced with this all-mighty spec. Specifically developed to provide the ultimate in harmony between performance handling and control with supreme ride comfort yet capable of high level performance on circuit as well. With massive adjustability in ride height and damper settings these items are an excellent choice for the daily driver to look and perform best under any kind of circumstance.\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual shape may differ.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution VIII - CT9A (2003-2005) 4G63\u003c!--split--\u003e"}

{"id":6792967159990,"title":"HKS Coilover Suspension Full Kit Hipermax S - Mitsubishi Lancer Evolution X CZ4A (2007-2017)","handle":"hks-coilover-suspension-full-kit-hipermax-s-mitsubishi-lancer-evolution-x-cz4a-2007-2017-80300-am001","description":"SPECIFICATIONS:\u003cbr\u003eManufacturer: HKS\u003cbr\u003eAdjustability: Dampening and Height Adjustable\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eSeries: Hipermax S\u003cbr\u003eSpring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: 98(10)\u003cbr\u003e- Rear: 69(7)\u003cbr\u003eFree Height (mm):\u003cbr\u003e- Front: 220(Barrel)\u003cbr\u003e- Rear: 220(Barrel)\u003cbr\u003eRecommended Range to change Spring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: -20 ( 2 )\u003cbr\u003e- Rear: -20 ( 2 )\u003cbr\u003eDamper Force (Rebound\/Damping):\u003cbr\u003e- Front: 898\/481\u003cbr\u003e- Rear: 677\/348\u003cbr\u003e- Note: Damping force is at piston speed 0.1m\/sec.\u003cbr\u003eDefault position of Dial:\u003cbr\u003e- Front: 15\u003cbr\u003e- Rear: 15\u003cbr\u003eDamping Force Adjustment:\u003cbr\u003e- Front: 30 Steps\u003cbr\u003e- Rear: 30 Steps\u003cbr\u003eHeight Adjustable Lower Bracket:\u003cbr\u003e- Front: Yes\u003cbr\u003e- Rear: Yes\u003cbr\u003eUpper Mount:\u003cbr\u003e- Front: Rubber Bush\u003cbr\u003e- Rear: Rubber Bush\u003cbr\u003eDamper Layout:\u003cbr\u003e- Front: Inverted\u003cbr\u003e- Rear: Normal\u003cbr\u003eDamper\/Spring Layout:\u003cbr\u003e- Front: Coilover\u003cbr\u003e- Rear: Coilover\u003cbr\u003eDamping force adjustable with Wire:\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: N\/A\u003cbr\u003eHelper Spring (Spring Rate N\/mm):\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: 19.8\u003cbr\u003eRide Height Specification -\u003cbr\u003e-Maximum Adjustable Range High - Low (mm):\u003cbr\u003e-- Front: -19 ～ -60\u003cbr\u003e-- Rear: 0 ～ -57\u003cbr\u003e-Drivable Range High - Low (mm):\u003cbr\u003e-- Front: -19 ～ -60\u003cbr\u003e-- Rear: 0 ～ -57\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Rear damping force adjustment cable included\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- Only for turbo vehicles 10\/07~09\/15\u003cbr\u003e\u003cbr\u003eThis set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV GT release this series has unified the many different street based Hipermax merits and further improved this new flagship series for the ultimate combination of driving performance and comfort performance, Driving Comfort. With exception of the circuit specific HIpermax IV SP series all other series will be replaced with this all-mighty spec. Specifically developed to provide the ultimate in harmony between performance handling and control with supreme ride comfort yet capable of high level performance on circuit as well. With massive adjustability in ride height and damper settings these items are an excellent choice for the daily driver to look and perform best under any kind of circumstance.`\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual shape may differ.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution X - CZ4A (2007-2008) 4B11\u003cbr\u003eMitsubishi - Lancer Evolution X - CZ4A (2008-2009) 4B11\u003cbr\u003eMitsubishi - Lancer Evolution X - CZ4A (2009-2017) 4B11\u003c!--split--\u003e","published_at":"2021-06-16T14:04:57+08:00","created_at":"2021-06-16T14:05:00+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","coilovers-and-springs","dampening-and-height-adjustable","hks","jp1","lancer-evolution-x-cz4a-chuki-rs-jdmgsr-2008-2009-tc-4b11-i4","lancer-evolution-x-cz4a-kouki-rs-jdmgsr-2009-2017-tc-4b11-i4","lancer-evolution-x-cz4a-zenki-rs-jdmgsr-2007-2008-tc-4b11-i4","mitsubishi","ws122"],"price":195234,"price_min":195234,"price_max":195234,"available":true,"price_varies":false,"compare_at_price":250300,"compare_at_price_min":250300,"compare_at_price_max":250300,"compare_at_price_varies":false,"variants":[{"id":39946783490230,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80300-AM001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Coilover Suspension Full Kit Hipermax S - Mitsubishi Lancer Evolution X CZ4A (2007-2017)","public_title":null,"options":["Default Title"],"price":195234,"weight":30000,"compare_at_price":250300,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-mitsubishi-lancer-evolution-x-cz4a-2007-2017-rzcrew.jpg?v=1710324714"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-mitsubishi-lancer-evolution-x-cz4a-2007-2017-rzcrew.jpg?v=1710324714","options":["Title"],"media":[{"alt":"HKS Coilover Suspension Full Kit Hipermax S - Mitsubishi Lancer Evolution X CZ4A (2007-2017) - 80300-AM001 - Rzcrewgarage","id":22891567513782,"position":1,"preview_image":{"aspect_ratio":1.21,"height":496,"width":600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-mitsubishi-lancer-evolution-x-cz4a-2007-2017-rzcrew.jpg?v=1710324714"},"aspect_ratio":1.21,"height":496,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-coilover-suspension-full-kit-hipermax-s-mitsubishi-lancer-evolution-x-cz4a-2007-2017-rzcrew.jpg?v=1710324714","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS:\u003cbr\u003eManufacturer: HKS\u003cbr\u003eAdjustability: Dampening and Height Adjustable\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eSeries: Hipermax S\u003cbr\u003eSpring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: 98(10)\u003cbr\u003e- Rear: 69(7)\u003cbr\u003eFree Height (mm):\u003cbr\u003e- Front: 220(Barrel)\u003cbr\u003e- Rear: 220(Barrel)\u003cbr\u003eRecommended Range to change Spring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: -20 ( 2 )\u003cbr\u003e- Rear: -20 ( 2 )\u003cbr\u003eDamper Force (Rebound\/Damping):\u003cbr\u003e- Front: 898\/481\u003cbr\u003e- Rear: 677\/348\u003cbr\u003e- Note: Damping force is at piston speed 0.1m\/sec.\u003cbr\u003eDefault position of Dial:\u003cbr\u003e- Front: 15\u003cbr\u003e- Rear: 15\u003cbr\u003eDamping Force Adjustment:\u003cbr\u003e- Front: 30 Steps\u003cbr\u003e- Rear: 30 Steps\u003cbr\u003eHeight Adjustable Lower Bracket:\u003cbr\u003e- Front: Yes\u003cbr\u003e- Rear: Yes\u003cbr\u003eUpper Mount:\u003cbr\u003e- Front: Rubber Bush\u003cbr\u003e- Rear: Rubber Bush\u003cbr\u003eDamper Layout:\u003cbr\u003e- Front: Inverted\u003cbr\u003e- Rear: Normal\u003cbr\u003eDamper\/Spring Layout:\u003cbr\u003e- Front: Coilover\u003cbr\u003e- Rear: Coilover\u003cbr\u003eDamping force adjustable with Wire:\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: N\/A\u003cbr\u003eHelper Spring (Spring Rate N\/mm):\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: 19.8\u003cbr\u003eRide Height Specification -\u003cbr\u003e-Maximum Adjustable Range High - Low (mm):\u003cbr\u003e-- Front: -19 ～ -60\u003cbr\u003e-- Rear: 0 ～ -57\u003cbr\u003e-Drivable Range High - Low (mm):\u003cbr\u003e-- Front: -19 ～ -60\u003cbr\u003e-- Rear: 0 ～ -57\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Rear damping force adjustment cable included\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- Only for turbo vehicles 10\/07~09\/15\u003cbr\u003e\u003cbr\u003eThis set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV GT release this series has unified the many different street based Hipermax merits and further improved this new flagship series for the ultimate combination of driving performance and comfort performance, Driving Comfort. With exception of the circuit specific HIpermax IV SP series all other series will be replaced with this all-mighty spec. Specifically developed to provide the ultimate in harmony between performance handling and control with supreme ride comfort yet capable of high level performance on circuit as well. With massive adjustability in ride height and damper settings these items are an excellent choice for the daily driver to look and perform best under any kind of circumstance.`\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual shape may differ.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution X - CZ4A (2007-2008) 4B11\u003cbr\u003eMitsubishi - Lancer Evolution X - CZ4A (2008-2009) 4B11\u003cbr\u003eMitsubishi - Lancer Evolution X - CZ4A (2009-2017) 4B11\u003c!--split--\u003e"}

{"id":7192592875702,"title":"HKS Hi Power Spec L II Exhaust System - Mitsubishi - Lancer Evolution X CZ4A","handle":"hks-hi-power-spec-l-ii-cz4a-31019-am111","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 31019-AM111\u003cbr\u003eType: Exhaust System\u003cbr\u003eMaterial: Stainless Steel\u003cbr\u003e\u003cbr\u003eThis is the second version of the Hi-Power Spec L series muffler. A renewal that allows for the muffler tip finisher cover to be exchanged in between different materials and style for the ultimate choice in the finishing touch. A pure sports spec series muffler designed with the ideal combination of hi-power and ultra lightweight spec. It produces a high quality sports sound with Advantex wool equipped silencers while maintaining street legal JASMA status. Significant weight reduction between 30~60% has been achieved with ultra efficient compact silencers, construction and materials. A weight close to many titanium mufflers while maintaining the more cost effective price of high quality stainless steel.\u003cbr\u003e\u003cbr\u003eMuffler Type: Hi-Power SPEC-L II\u003cbr\u003eMuffler Tip: HP\u003cbr\u003eTip Diameter (mm): 94 L\u0026amp;R\u003cbr\u003ePiping Diameter (mm): 65-50 x 2\u003cbr\u003eDb level: 90\u003cbr\u003eDb Level Idling: 68\u003cbr\u003eManufacturer Notes: Tail cover size:?94 L=48\u003cbr\u003e\u003cbr\u003e* Weight: 9.2kg (54% lighter compared to stock) Final Edition complies with Japanese regulation.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eLancer Evolution X | CZ4A Zenki (GSR Jdm\/MR) | 2007-2008 | TC | 4B11 | I4,Lancer Evolution X | CZ4A Chuki (GSR Jdm\/MR) | 2008-2009 | TC | 4B11 | I4,Lancer Evolution X | CZ4A Kouki (GSR Jdm\/MR) | 2009-2017 | TC | 4B11 | I4,Lancer Evolution X | CZ4A Zenki (RS Jdm\/GSR) | 2007-2008 | TC | 4B11 | I4,Lancer Evolution X | CZ4A Chuki (RS Jdm\/GSR) | 2008-2009 | TC | 4B11 | I4,Lancer Evolution X | CZ4A Kouki (RS Jdm\/GSR) | 2009-2017 | TC | 4B11 | I4\u003c!--split--\u003e","published_at":"2021-12-08T03:58:42+08:00","created_at":"2021-12-08T03:03:29+08:00","vendor":"HKS","type":"Catbacks - Exhaust Manifolds","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","catbacks-exhaust-manifolds","CZ4A","exhaust","exhaust-system","hks","jp1","lancer-evolution-x-cz4a-chuki-gsr-jdmmr-2008-2009-tc-4b11-i4","lancer-evolution-x-cz4a-chuki-rs-jdmgsr-2008-2009-tc-4b11-i4","lancer-evolution-x-cz4a-kouki-gsr-jdmmr-2009-2017-tc-4b11-i4","lancer-evolution-x-cz4a-kouki-rs-jdmgsr-2009-2017-tc-4b11-i4","lancer-evolution-x-cz4a-zenki-gsr-jdmmr-2007-2008-tc-4b11-i4","lancer-evolution-x-cz4a-zenki-rs-jdmgsr-2007-2008-tc-4b11-i4","mitsubishi","stainless-steel","ws117"],"price":122840,"price_min":122840,"price_max":122840,"available":true,"price_varies":false,"compare_at_price":148000,"compare_at_price_min":148000,"compare_at_price_max":148000,"compare_at_price_varies":false,"variants":[{"id":40973575323830,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"31019-AM111","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Hi Power Spec L II Exhaust System - Mitsubishi - Lancer Evolution X CZ4A","public_title":null,"options":["Default Title"],"price":122840,"weight":82931,"compare_at_price":148000,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-hi-power-spec-l-ii-exhaust-system-mitsubishi-lancer-evolution-x-cz4a-rzcrew.jpg?v=1710322003"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-hi-power-spec-l-ii-exhaust-system-mitsubishi-lancer-evolution-x-cz4a-rzcrew.jpg?v=1710322003","options":["Title"],"media":[{"alt":"HKS Hi Power Spec L II - CZ4A - 31019-AM111","id":25418298917046,"position":1,"preview_image":{"aspect_ratio":0.949,"height":590,"width":560,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-hi-power-spec-l-ii-exhaust-system-mitsubishi-lancer-evolution-x-cz4a-rzcrew.jpg?v=1710322003"},"aspect_ratio":0.949,"height":590,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-hi-power-spec-l-ii-exhaust-system-mitsubishi-lancer-evolution-x-cz4a-rzcrew.jpg?v=1710322003","width":560}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 31019-AM111\u003cbr\u003eType: Exhaust System\u003cbr\u003eMaterial: Stainless Steel\u003cbr\u003e\u003cbr\u003eThis is the second version of the Hi-Power Spec L series muffler. A renewal that allows for the muffler tip finisher cover to be exchanged in between different materials and style for the ultimate choice in the finishing touch. A pure sports spec series muffler designed with the ideal combination of hi-power and ultra lightweight spec. It produces a high quality sports sound with Advantex wool equipped silencers while maintaining street legal JASMA status. Significant weight reduction between 30~60% has been achieved with ultra efficient compact silencers, construction and materials. A weight close to many titanium mufflers while maintaining the more cost effective price of high quality stainless steel.\u003cbr\u003e\u003cbr\u003eMuffler Type: Hi-Power SPEC-L II\u003cbr\u003eMuffler Tip: HP\u003cbr\u003eTip Diameter (mm): 94 L\u0026amp;R\u003cbr\u003ePiping Diameter (mm): 65-50 x 2\u003cbr\u003eDb level: 90\u003cbr\u003eDb Level Idling: 68\u003cbr\u003eManufacturer Notes: Tail cover size:?94 L=48\u003cbr\u003e\u003cbr\u003e* Weight: 9.2kg (54% lighter compared to stock) Final Edition complies with Japanese regulation.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eLancer Evolution X | CZ4A Zenki (GSR Jdm\/MR) | 2007-2008 | TC | 4B11 | I4,Lancer Evolution X | CZ4A Chuki (GSR Jdm\/MR) | 2008-2009 | TC | 4B11 | I4,Lancer Evolution X | CZ4A Kouki (GSR Jdm\/MR) | 2009-2017 | TC | 4B11 | I4,Lancer Evolution X | CZ4A Zenki (RS Jdm\/GSR) | 2007-2008 | TC | 4B11 | I4,Lancer Evolution X | CZ4A Chuki (RS Jdm\/GSR) | 2008-2009 | TC | 4B11 | I4,Lancer Evolution X | CZ4A Kouki (RS Jdm\/GSR) | 2009-2017 | TC | 4B11 | I4\u003c!--split--\u003e"}

{"id":8063814566070,"title":"HKS Racing Suction Intake Kit - Mitsubishi - Lancer Evolution X CZ4A Chuki\/Kouki","handle":"hks-racing-suction-intake-kit-cz4a-chuki-kouki-70020-am106","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 70020-AM106\u003cbr\u003eIntake Type: Short Ram Intake\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003e\nSeries: Racing Suction\u003cbr\u003e\nSize (mm): 200-80\u003cbr\u003e\nFilter Color: Red\u003cbr\u003e\nMaterial:\u003cbr\u003e\nFilter: Polyurethane Foam\u003cbr\u003e\nPipe: Aluminum\u003cbr\u003e\nHose: Silicone\u003cbr\u003e\u003cbr\u003e\n\nCOMPATIBILITY NOTES:\u003cbr\u003e\n- Only for TC-SST Vehicles from 10\/08\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eLancer Evolution X | CZ4A Chuki (RS Jdm\/GSR) | 2008-2009 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Chuki (GSR Jdm\/MR) | 2008-2009 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Zenki (RS Jdm\/GSR) | 2007-2008 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Zenki (GSR Jdm\/MR) | 2007-2008 | TC | 4B11 | I4\u003c!--split--\u003e","published_at":"2024-09-02T10:28:15+08:00","created_at":"2024-09-02T10:27:03+08:00","vendor":"HKS","type":"Intake Kits","tags":["2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","hks","intake","intake-kits","jp1","lancer-evolution-x-cz4a-chuki-gsr-jdmmr-2008-2009-tc-4b11-i4","lancer-evolution-x-cz4a-chuki-rs-jdmgsr-2008-2009-tc-4b11-i4","lancer-evolution-x-cz4a-zenki-gsr-jdmmr-2007-2008-tc-4b11-i4","lancer-evolution-x-cz4a-zenki-rs-jdmgsr-2007-2008-tc-4b11-i4","mitsubishi","short-ram-intake","ws123"],"price":46893,"price_min":46893,"price_max":46893,"available":true,"price_varies":false,"compare_at_price":60900,"compare_at_price_min":60900,"compare_at_price_max":60900,"compare_at_price_varies":false,"variants":[{"id":43436814237878,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"70020-AM106","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Racing Suction Intake Kit - Mitsubishi - Lancer Evolution X CZ4A Chuki\/Kouki","public_title":null,"options":["Default Title"],"price":46893,"weight":6000,"compare_at_price":60900,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/70020-AM105_023daf46-68dc-49c0-8da6-84b6b94cc167.webp?v=1725244024"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/70020-AM105_023daf46-68dc-49c0-8da6-84b6b94cc167.webp?v=1725244024","options":["Title"],"media":[{"alt":"HKS Racing Suction Intake Kit - CZ4A Chuki\/Kouki - 70020-AM106","id":28420807327926,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/70020-AM105_023daf46-68dc-49c0-8da6-84b6b94cc167.webp?v=1725244024"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/70020-AM105_023daf46-68dc-49c0-8da6-84b6b94cc167.webp?v=1725244024","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 70020-AM106\u003cbr\u003eIntake Type: Short Ram Intake\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003e\nSeries: Racing Suction\u003cbr\u003e\nSize (mm): 200-80\u003cbr\u003e\nFilter Color: Red\u003cbr\u003e\nMaterial:\u003cbr\u003e\nFilter: Polyurethane Foam\u003cbr\u003e\nPipe: Aluminum\u003cbr\u003e\nHose: Silicone\u003cbr\u003e\u003cbr\u003e\n\nCOMPATIBILITY NOTES:\u003cbr\u003e\n- Only for TC-SST Vehicles from 10\/08\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eLancer Evolution X | CZ4A Chuki (RS Jdm\/GSR) | 2008-2009 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Chuki (GSR Jdm\/MR) | 2008-2009 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Zenki (RS Jdm\/GSR) | 2007-2008 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Zenki (GSR Jdm\/MR) | 2007-2008 | TC | 4B11 | I4\u003c!--split--\u003e"}

{"id":8063814500534,"title":"HKS Racing Suction Intake Kit - Mitsubishi - Lancer Evolution X CZ4A Zenki","handle":"hks-racing-suction-intake-kit-cz4a-zenki-70020-am105","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 70020-AM105\u003cbr\u003eIntake Type: Short Ram Intake\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003e\nSeries: Racing Suction\u003cbr\u003e\nSize (mm): 200-80\u003cbr\u003e\nFilter Color: Red\u003cbr\u003e\nMaterial:\u003cbr\u003e\nFilter: Polyurethane Foam\u003cbr\u003e\nPipe: Aluminum\u003cbr\u003e\nHose: Silicone\u003cbr\u003e\u003cbr\u003e\n\nCOMPATIBILITY NOTES:\u003cbr\u003e\n- Only for TC-SST Vehicles before 10\/08\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eLancer Evolution X | CZ4A Zenki (RS Jdm\/GSR) | 2007-2008 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Zenki (GSR Jdm\/MR) | 2007-2008 | TC | 4B11 | I4\u003c!--split--\u003e","published_at":"2024-09-02T10:28:11+08:00","created_at":"2024-09-02T10:27:01+08:00","vendor":"HKS","type":"Intake Kits","tags":["2007","2008","hks","intake","intake-kits","jp1","lancer-evolution-x-cz4a-zenki-gsr-jdmmr-2007-2008-tc-4b11-i4","lancer-evolution-x-cz4a-zenki-rs-jdmgsr-2007-2008-tc-4b11-i4","mitsubishi","short-ram-intake","ws123"],"price":46893,"price_min":46893,"price_max":46893,"available":true,"price_varies":false,"compare_at_price":60900,"compare_at_price_min":60900,"compare_at_price_max":60900,"compare_at_price_varies":false,"variants":[{"id":43436814172342,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"70020-AM105","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Racing Suction Intake Kit - Mitsubishi - Lancer Evolution X CZ4A Zenki","public_title":null,"options":["Default Title"],"price":46893,"weight":6000,"compare_at_price":60900,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/70020-AM105_2f466b98-da4a-4642-973d-f0d7ecca5ea1.webp?v=1725244021"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/70020-AM105_2f466b98-da4a-4642-973d-f0d7ecca5ea1.webp?v=1725244021","options":["Title"],"media":[{"alt":"HKS Racing Suction Intake Kit - CZ4A Zenki - 70020-AM105","id":28420806705334,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/70020-AM105_2f466b98-da4a-4642-973d-f0d7ecca5ea1.webp?v=1725244021"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/70020-AM105_2f466b98-da4a-4642-973d-f0d7ecca5ea1.webp?v=1725244021","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 70020-AM105\u003cbr\u003eIntake Type: Short Ram Intake\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003e\nSeries: Racing Suction\u003cbr\u003e\nSize (mm): 200-80\u003cbr\u003e\nFilter Color: Red\u003cbr\u003e\nMaterial:\u003cbr\u003e\nFilter: Polyurethane Foam\u003cbr\u003e\nPipe: Aluminum\u003cbr\u003e\nHose: Silicone\u003cbr\u003e\u003cbr\u003e\n\nCOMPATIBILITY NOTES:\u003cbr\u003e\n- Only for TC-SST Vehicles before 10\/08\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eLancer Evolution X | CZ4A Zenki (RS Jdm\/GSR) | 2007-2008 | TC | 4B11 | I4\u003cbr\u003eLancer Evolution X | CZ4A Zenki (GSR Jdm\/MR) | 2007-2008 | TC | 4B11 | I4\u003c!--split--\u003e"}

{"id":8111717089462,"title":"HKS Silent High Power Exhaust System - Mitsubishi - Lancer Evolution IX CT9A Evo 9","handle":"hks-silent-high-power-exhaust-system-ct9a-evo-9-31019-am008","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 31019-AM008\u003cbr\u003eType: Exhaust System\u003cbr\u003eMaterial: Stainless Steel\u003cbr\u003e\u003cbr\u003eHKS Silent Hi-Power Exhaust systems are Inspired and designed from endurance and GT Racing in Japan, HKS Developed its Silent Hi-Power Exhaust system for both turbocharged and naturally aspirated applications.\u003cbr\u003e\u003cbr\u003eHKS has incorporated this new race inspired offset muffler and piping design into many street applications, which offers greater flow and higher RPM Power gains due to the less restrictive design.\u003cbr\u003e\u003cbr\u003eThis is achieved by eliminating unnecessary bends for the straightest exhaust path.\u003cbr\u003e\u003cbr\u003eThe HKS Silent Hi-Power Exhaust System is constructed of fully polished SUS304 Stainless Steel and is designed for enthusiasts seeking the highest quality performance exhaust system with only a slight increase in exhaust note.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eLancer Evolution IX | CT9A | 2005-2007 | TC | 4G63T Mivec | I4\u003c!--split--\u003e","published_at":"2024-11-22T15:15:45+08:00","created_at":"2024-11-22T15:14:34+08:00","vendor":"HKS","type":"Catbacks - Exhaust Manifolds","tags":["2005","2006","2007","catbacks-exhaust-manifolds","CT9A Evo 9","exhaust","exhaust-system","hks","JP1","lancer-evolution-ix-ct9a-2005-2007-tc-4g63t-mivec-i4","mitsubishi","stainless-steel","ws118"],"price":93880,"price_min":93880,"price_max":93880,"available":true,"price_varies":false,"compare_at_price":112800,"compare_at_price_min":112800,"compare_at_price_max":112800,"compare_at_price_varies":false,"variants":[{"id":43632794009782,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"31019-AM008","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Silent High Power Exhaust System - Mitsubishi - Lancer Evolution IX CT9A Evo 9","public_title":null,"options":["Default Title"],"price":93880,"weight":26600,"compare_at_price":112800,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/31019-AM0008_f83eb9d2-ebb4-4677-a68e-1dcd5d48d663.jpg?v=1732259674"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/31019-AM0008_f83eb9d2-ebb4-4677-a68e-1dcd5d48d663.jpg?v=1732259674","options":["Title"],"media":[{"alt":"HKS Silent High Power Exhaust System - CT9A Evo 9 - 31019-AM008","id":28802474836150,"position":1,"preview_image":{"aspect_ratio":1.155,"height":485,"width":560,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/31019-AM0008_f83eb9d2-ebb4-4677-a68e-1dcd5d48d663.jpg?v=1732259674"},"aspect_ratio":1.155,"height":485,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/31019-AM0008_f83eb9d2-ebb4-4677-a68e-1dcd5d48d663.jpg?v=1732259674","width":560}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 31019-AM008\u003cbr\u003eType: Exhaust System\u003cbr\u003eMaterial: Stainless Steel\u003cbr\u003e\u003cbr\u003eHKS Silent Hi-Power Exhaust systems are Inspired and designed from endurance and GT Racing in Japan, HKS Developed its Silent Hi-Power Exhaust system for both turbocharged and naturally aspirated applications.\u003cbr\u003e\u003cbr\u003eHKS has incorporated this new race inspired offset muffler and piping design into many street applications, which offers greater flow and higher RPM Power gains due to the less restrictive design.\u003cbr\u003e\u003cbr\u003eThis is achieved by eliminating unnecessary bends for the straightest exhaust path.\u003cbr\u003e\u003cbr\u003eThe HKS Silent Hi-Power Exhaust System is constructed of fully polished SUS304 Stainless Steel and is designed for enthusiasts seeking the highest quality performance exhaust system with only a slight increase in exhaust note.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eLancer Evolution IX | CT9A | 2005-2007 | TC | 4G63T Mivec | I4\u003c!--split--\u003e"}

{"id":8111663775926,"title":"HKS Sports Turbine Kit GTIII RS - Mitsubishi - Lancer Evolution CT9A Evo 7\/8\/9","handle":"hks-sports-turbine-kit-gtiii-rs-ct9a-evo-7-8-9-11004-am007","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 11004-AM007\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe \"GTIII Turbine\" was born from a combination of MHI CHRA, which incorporates the latest turbo technology for today's highly efficient engines, and an original HKS housing that incorporates all of the know-how cultivated over many years of developing tuning turbos.\u003cbr\u003eThe latest high-efficiency MHI center cartridge is used.\u003cbr\u003e\nThe latest engines require turbochargers to be highly efficient and boosted, and thanks to advances in numerical analysis and advances in machine tools, it is now possible to machine out complex blade shapes that could not be made by casting. Therefore, the GTIII impeller can ensure high boost without causing surging even in low airflow areas.\u003cbr\u003e\nHKS, who knows turbo engines inside and out, has designed the optimal housing by utilizing its many years of know-how in turbocharger development and the latest fluid analysis. The combination of the best blades and the optimal housing has a wide range of high compressor efficiency, so it is a so-called wide range turbo, which makes it easy to match with the engine and allows you to enjoy your favorite settings.\nThe 4G63's tuning menu has also reached a mature stage, with the 4G63 having the potential to produce over 257kW (350ps) even with boost increased from the original turbine. As such, it is not generally assumed that this will be installed in a vehicle with a fully stock fuel system. However, for those who wish to achieve milder characteristics with reduced boost pressure (below 98kPa), we have made a special restrictor available as an option.\u003cbr\u003e\u003cbr\u003eWhen installing, it will be necessary to modify the original parts.\u003cbr\u003e\nStrengthen the engine and fuel system as necessary.\u003cbr\u003e\nMeasurement data is our in-house data. Output values ??may vary depending on the measurement equipment, measurement conditions, individual vehicle differences, specifications, etc.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eLancer Evolution VII | CT9A | 2001-2002 | TC | 4G63T 3rd Gen | I4,Lancer Evolution VIII | CT9A | 2003-2005 | TC | 4G63T Mivec | I4,Lancer Evolution IX | CT9A | 2005-2007 | TC | 4G63T Mivec | I4\u003c!--split--\u003e","published_at":"2024-11-22T15:17:11+08:00","created_at":"2024-11-22T13:28:54+08:00","vendor":"HKS","type":"Turbocharger Kits","tags":["2001","2002","2003","2004","2005","2006","2007","CT9A Evo 7\/8\/9","forced-induction","hks","JP1","lancer-evolution-ix-ct9a-2005-2007-tc-4g63t-mivec-i4","lancer-evolution-vii-ct9a-2001-2002-tc-4g63t-3rd-gen-i4","lancer-evolution-viii-ct9a-2003-2005-tc-4g63t-mivec-i4","mitsubishi","turbocharger-kits","ws112"],"price":264176,"price_min":264176,"price_max":264176,"available":true,"price_varies":false,"compare_at_price":300200,"compare_at_price_min":300200,"compare_at_price_max":300200,"compare_at_price_varies":false,"variants":[{"id":43632554967222,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"11004-AM007","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Sports Turbine Kit GTIII RS - Mitsubishi - Lancer Evolution CT9A Evo 7\/8\/9","public_title":null,"options":["Default Title"],"price":264176,"weight":16000,"compare_at_price":300200,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/11004-AM007_f5cd9123-cfe3-4e61-a5ec-6b11eb1d5f1e.jpg?v=1732253335","\/\/rzcrewgarage.com\/cdn\/shop\/files\/yx64COjMNvuR5noLONicfSGc8fOX04XU6KQ7L8QU_a1968044-8ccc-4bdd-8f96-7fd54fd73bbe.gif?v=1732253335"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/11004-AM007_f5cd9123-cfe3-4e61-a5ec-6b11eb1d5f1e.jpg?v=1732253335","options":["Title"],"media":[{"alt":"HKS Sports Turbine Kit GTIII RS - Mitsubishi - Lancer Evolution CT9A Evo 7\/8\/9","id":28802094989494,"position":1,"preview_image":{"aspect_ratio":1.21,"height":529,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/11004-AM007_f5cd9123-cfe3-4e61-a5ec-6b11eb1d5f1e.jpg?v=1732253335"},"aspect_ratio":1.21,"height":529,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/11004-AM007_f5cd9123-cfe3-4e61-a5ec-6b11eb1d5f1e.jpg?v=1732253335","width":640},{"alt":"HKS Sports Turbine Kit GTIII RS - Mitsubishi - Lancer Evolution CT9A Evo 7\/8\/9","id":28802095022262,"position":2,"preview_image":{"aspect_ratio":1.667,"height":480,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/yx64COjMNvuR5noLONicfSGc8fOX04XU6KQ7L8QU_a1968044-8ccc-4bdd-8f96-7fd54fd73bbe.gif?v=1732253335"},"aspect_ratio":1.667,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/yx64COjMNvuR5noLONicfSGc8fOX04XU6KQ7L8QU_a1968044-8ccc-4bdd-8f96-7fd54fd73bbe.gif?v=1732253335","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 11004-AM007\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe \"GTIII Turbine\" was born from a combination of MHI CHRA, which incorporates the latest turbo technology for today's highly efficient engines, and an original HKS housing that incorporates all of the know-how cultivated over many years of developing tuning turbos.\u003cbr\u003eThe latest high-efficiency MHI center cartridge is used.\u003cbr\u003e\nThe latest engines require turbochargers to be highly efficient and boosted, and thanks to advances in numerical analysis and advances in machine tools, it is now possible to machine out complex blade shapes that could not be made by casting. Therefore, the GTIII impeller can ensure high boost without causing surging even in low airflow areas.\u003cbr\u003e\nHKS, who knows turbo engines inside and out, has designed the optimal housing by utilizing its many years of know-how in turbocharger development and the latest fluid analysis. The combination of the best blades and the optimal housing has a wide range of high compressor efficiency, so it is a so-called wide range turbo, which makes it easy to match with the engine and allows you to enjoy your favorite settings.\nThe 4G63's tuning menu has also reached a mature stage, with the 4G63 having the potential to produce over 257kW (350ps) even with boost increased from the original turbine. As such, it is not generally assumed that this will be installed in a vehicle with a fully stock fuel system. However, for those who wish to achieve milder characteristics with reduced boost pressure (below 98kPa), we have made a special restrictor available as an option.\u003cbr\u003e\u003cbr\u003eWhen installing, it will be necessary to modify the original parts.\u003cbr\u003e\nStrengthen the engine and fuel system as necessary.\u003cbr\u003e\nMeasurement data is our in-house data. Output values ??may vary depending on the measurement equipment, measurement conditions, individual vehicle differences, specifications, etc.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eLancer Evolution VII | CT9A | 2001-2002 | TC | 4G63T 3rd Gen | I4,Lancer Evolution VIII | CT9A | 2003-2005 | TC | 4G63T Mivec | I4,Lancer Evolution IX | CT9A | 2005-2007 | TC | 4G63T Mivec | I4\u003c!--split--\u003e"}

{"id":6572369117366,"title":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Galant Fortis CY4A (2007-2018)","handle":"hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-galant-fortis-cy4a-2007-2018-71008-am016","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Galant Fortis - CY4A (2007-2009) 4B11\u003cbr\u003eMitsubishi - Galant Fortis - CY4A (2009-2018) 4B11\u003c!--split--\u003e","published_at":"2021-03-12T11:16:53+08:00","created_at":"2021-03-12T11:16:54+08:00","vendor":"Hks","type":"Universal Blow Off Valves","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","forced-induction","galant-fortis-cy4a-2007-2009-na-4b11-i4","galant-fortis-cy4a-2009-2018-na-4b11-i4","hks","jp1","mitsubishi","universal-blow-off-valves","ws122"],"price":29562,"price_min":29562,"price_max":29562,"available":true,"price_varies":false,"compare_at_price":37900,"compare_at_price_min":37900,"compare_at_price_max":37900,"compare_at_price_varies":false,"variants":[{"id":39347321307318,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"71008-AM016","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Galant Fortis CY4A (2007-2018)","public_title":null,"options":["Default Title"],"price":29562,"weight":3000,"compare_at_price":37900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-galant-fortis-cy4a-2007-2018-rzcrew.jpg?v=1710326216"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-galant-fortis-cy4a-2007-2018-rzcrew.jpg?v=1710326216","options":["Title"],"media":[{"alt":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Galant Fortis CY4A (2007-2018) - 71008-AM016 - Rzcrewgarage","id":22330846937270,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-galant-fortis-cy4a-2007-2018-rzcrew.jpg?v=1710326216"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-galant-fortis-cy4a-2007-2018-rzcrew.jpg?v=1710326216","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Galant Fortis - CY4A (2007-2009) 4B11\u003cbr\u003eMitsubishi - Galant Fortis - CY4A (2009-2018) 4B11\u003c!--split--\u003e"}

{"id":6572369215670,"title":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Galant Fortis SportBack CX4A (2008-2015)","handle":"hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-galant-fortis-sportback-cx4a-2008-2015-71008-am016","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Galant Fortis SportBack - CX4A (2008-2009) 4B11\u003cbr\u003eMitsubishi - Galant Fortis SportBack - CX4A (2009-2015) 4B11\u003c!--split--\u003e","published_at":"2021-03-12T11:17:01+08:00","created_at":"2021-03-12T11:17:02+08:00","vendor":"Hks","type":"Universal Blow Off Valves","tags":["2008","2009","2010","2011","2012","2013","2014","2015","forced-induction","galant-fortis-sportback-cx4a2wd-2009-2015-na-4b11-i4","galant-fortis-sportback-cx4a4wd-2008-2015-na-4b11-i4","hks","jp1","mitsubishi","universal-blow-off-valves","ws122"],"price":29562,"price_min":29562,"price_max":29562,"available":true,"price_varies":false,"compare_at_price":37900,"compare_at_price_min":37900,"compare_at_price_max":37900,"compare_at_price_varies":false,"variants":[{"id":39347321340086,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"71008-AM016","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Galant Fortis SportBack CX4A (2008-2015)","public_title":null,"options":["Default Title"],"price":29562,"weight":3000,"compare_at_price":37900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-galant-fortis-sportback-cx4a-2008-2015-rzcrew.jpg?v=1710326216"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-galant-fortis-sportback-cx4a-2008-2015-rzcrew.jpg?v=1710326216","options":["Title"],"media":[{"alt":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Galant Fortis SportBack CX4A (2008-2015) - 71008-AM016 - Rzcrewgarage","id":22330847232182,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-galant-fortis-sportback-cx4a-2008-2015-rzcrew.jpg?v=1710326216"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-galant-fortis-sportback-cx4a-2008-2015-rzcrew.jpg?v=1710326216","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Galant Fortis SportBack - CX4A (2008-2009) 4B11\u003cbr\u003eMitsubishi - Galant Fortis SportBack - CX4A (2009-2015) 4B11\u003c!--split--\u003e"}

{"id":6572369248438,"title":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution IV CN9A (1996-1997)","handle":"hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-iv-cn9a-1996-1997-71008-am006","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution IV - CN9A (1996-1997) 4G63\u003c!--split--\u003e","published_at":"2021-03-12T11:17:02+08:00","created_at":"2021-03-12T11:17:03+08:00","vendor":"Hks","type":"Universal Blow Off Valves","tags":["1996","1997","forced-induction","hks","jp1","lancer-evolution-iv-cn9a-1996-1997-tc-4g63t-2nd-gen-i4","mitsubishi","universal-blow-off-valves","ws122"],"price":22698,"price_min":22698,"price_max":22698,"available":true,"price_varies":false,"compare_at_price":29100,"compare_at_price_min":29100,"compare_at_price_max":29100,"compare_at_price_varies":false,"variants":[{"id":39347321372854,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"71008-AM006","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution IV CN9A (1996-1997)","public_title":null,"options":["Default Title"],"price":22698,"weight":3000,"compare_at_price":29100,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-iv-cn9a-1996-1997-rzcrew.jpg?v=1710326216"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-iv-cn9a-1996-1997-rzcrew.jpg?v=1710326216","options":["Title"],"media":[{"alt":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution IV CN9A (1996-1997) - 71008-AM006 - Rzcrewgarage","id":22330847953078,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-iv-cn9a-1996-1997-rzcrew.jpg?v=1710326216"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-iv-cn9a-1996-1997-rzcrew.jpg?v=1710326216","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution IV - CN9A (1996-1997) 4G63\u003c!--split--\u003e"}

{"id":6572369412278,"title":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution IX CT9A (2005-2007)","handle":"hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-ix-ct9a-2005-2007-71008-am011","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- Not compatible with GT-A models\u003cbr\u003e- Not be used with piping kit\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution IX - CT9A (2005-2007) 4G63\u003c!--split--\u003e","published_at":"2021-03-12T11:17:06+08:00","created_at":"2021-03-12T11:17:06+08:00","vendor":"Hks","type":"Universal Blow Off Valves","tags":["2005","2006","2007","forced-induction","hks","jp1","lancer-evolution-ix-ct9a-2005-2007-tc-4g63t-mivec-i4","mitsubishi","universal-blow-off-valves","ws122"],"price":25740,"price_min":25740,"price_max":25740,"available":true,"price_varies":false,"compare_at_price":33000,"compare_at_price_min":33000,"compare_at_price_max":33000,"compare_at_price_varies":false,"variants":[{"id":39347322454198,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"71008-AM011","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution IX CT9A (2005-2007)","public_title":null,"options":["Default Title"],"price":25740,"weight":3000,"compare_at_price":33000,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-ix-ct9a-2005-2007-rzcrew.jpg?v=1710326215"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-ix-ct9a-2005-2007-rzcrew.jpg?v=1710326215","options":["Title"],"media":[{"alt":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution IX CT9A (2005-2007) - 71008-AM011 - Rzcrewgarage","id":22330848641206,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-ix-ct9a-2005-2007-rzcrew.jpg?v=1710326215"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-ix-ct9a-2005-2007-rzcrew.jpg?v=1710326215","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- Not compatible with GT-A models\u003cbr\u003e- Not be used with piping kit\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution IX - CT9A (2005-2007) 4G63\u003c!--split--\u003e"}

{"id":6572369313974,"title":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution V CP9A (1998-1998)","handle":"hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-v-cp9a-1998-1998-71008-am006","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution V - CP9A (1998-1998) 4G63\u003c!--split--\u003e","published_at":"2021-03-12T11:17:03+08:00","created_at":"2021-03-12T11:17:04+08:00","vendor":"Hks","type":"Universal Blow Off Valves","tags":["1998","forced-induction","hks","jp1","lancer-evolution-v-cp9a-1998-1999-tc-4g63t-2nd-gen-i4","mitsubishi","universal-blow-off-valves","ws122"],"price":22698,"price_min":22698,"price_max":22698,"available":true,"price_varies":false,"compare_at_price":29100,"compare_at_price_min":29100,"compare_at_price_max":29100,"compare_at_price_varies":false,"variants":[{"id":39347321405622,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"71008-AM006","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution V CP9A (1998-1998)","public_title":null,"options":["Default Title"],"price":22698,"weight":3000,"compare_at_price":29100,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-v-cp9a-1998-1998-rzcrew.jpg?v=1710326216"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-v-cp9a-1998-1998-rzcrew.jpg?v=1710326216","options":["Title"],"media":[{"alt":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution V CP9A (1998-1998) - 71008-AM006 - Rzcrewgarage","id":22330848247990,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-v-cp9a-1998-1998-rzcrew.jpg?v=1710326216"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-v-cp9a-1998-1998-rzcrew.jpg?v=1710326216","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution V - CP9A (1998-1998) 4G63\u003c!--split--\u003e"}

{"id":6572369379510,"title":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution VI CP9A (1999-1999)","handle":"hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-vi-cp9a-1999-1999-71008-am006","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution VI - CP9A (1999-1999) 4G63\u003c!--split--\u003e","published_at":"2021-03-12T11:17:05+08:00","created_at":"2021-03-12T11:17:05+08:00","vendor":"Hks","type":"Universal Blow Off Valves","tags":["1999","forced-induction","hks","jp1","lancer-evolution-vi-cp9a-1999-2001-tc-4g63t-2nd-gen-i4","mitsubishi","universal-blow-off-valves","ws122"],"price":22698,"price_min":22698,"price_max":22698,"available":true,"price_varies":false,"compare_at_price":29100,"compare_at_price_min":29100,"compare_at_price_max":29100,"compare_at_price_varies":false,"variants":[{"id":39347321602230,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"71008-AM006","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution VI CP9A (1999-1999)","public_title":null,"options":["Default Title"],"price":22698,"weight":3000,"compare_at_price":29100,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-vi-cp9a-1999-1999-rzcrew.jpg?v=1710326216"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-vi-cp9a-1999-1999-rzcrew.jpg?v=1710326216","options":["Title"],"media":[{"alt":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution VI CP9A (1999-1999) - 71008-AM006 - Rzcrewgarage","id":22330848313526,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-vi-cp9a-1999-1999-rzcrew.jpg?v=1710326216"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-vi-cp9a-1999-1999-rzcrew.jpg?v=1710326216","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution VI - CP9A (1999-1999) 4G63\u003c!--split--\u003e"}

{"id":6572369445046,"title":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution VII CT9A (2001-2002)","handle":"hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-vii-ct9a-2001-2002-71008-am011","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- Not compatible with GT-A models\u003cbr\u003e- Not be used with piping kit\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution VII - CT9A (2001-2002) 4G63\u003c!--split--\u003e","published_at":"2021-03-12T11:17:07+08:00","created_at":"2021-03-12T11:17:08+08:00","vendor":"Hks","type":"Universal Blow Off Valves","tags":["2001","2002","forced-induction","hks","jp1","lancer-evolution-vii-ct9a-2001-2002-tc-4g63t-3rd-gen-i4","mitsubishi","universal-blow-off-valves","ws122"],"price":25740,"price_min":25740,"price_max":25740,"available":true,"price_varies":false,"compare_at_price":33000,"compare_at_price_min":33000,"compare_at_price_max":33000,"compare_at_price_varies":false,"variants":[{"id":39347323470006,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"71008-AM011","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution VII CT9A (2001-2002)","public_title":null,"options":["Default Title"],"price":25740,"weight":3000,"compare_at_price":33000,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-vii-ct9a-2001-2002-rzcrew.jpg?v=1710326215"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-vii-ct9a-2001-2002-rzcrew.jpg?v=1710326215","options":["Title"],"media":[{"alt":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution VII CT9A (2001-2002) - 71008-AM011 - Rzcrewgarage","id":22330848805046,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-vii-ct9a-2001-2002-rzcrew.jpg?v=1710326215"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-vii-ct9a-2001-2002-rzcrew.jpg?v=1710326215","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- Not compatible with GT-A models\u003cbr\u003e- Not be used with piping kit\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution VII - CT9A (2001-2002) 4G63\u003c!--split--\u003e"}

{"id":6572369477814,"title":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution VIII CT9A (2003-2005)","handle":"hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-viii-ct9a-2003-2005-71008-am011","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- Not compatible with GT-A models\u003cbr\u003e- Not be used with piping kit\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution VIII - CT9A (2003-2005) 4G63\u003c!--split--\u003e","published_at":"2021-03-12T11:17:08+08:00","created_at":"2021-03-12T11:17:09+08:00","vendor":"Hks","type":"Universal Blow Off Valves","tags":["2003","2004","2005","forced-induction","hks","jp1","lancer-evolution-viii-ct9a-2003-2005-tc-4g63t-mivec-i4","mitsubishi","universal-blow-off-valves","ws122"],"price":25740,"price_min":25740,"price_max":25740,"available":true,"price_varies":false,"compare_at_price":33000,"compare_at_price_min":33000,"compare_at_price_max":33000,"compare_at_price_varies":false,"variants":[{"id":39347323535542,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"71008-AM011","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution VIII CT9A (2003-2005)","public_title":null,"options":["Default Title"],"price":25740,"weight":3000,"compare_at_price":33000,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-viii-ct9a-2003-2005-rzcrew.jpg?v=1710326215"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-viii-ct9a-2003-2005-rzcrew.jpg?v=1710326215","options":["Title"],"media":[{"alt":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution VIII CT9A (2003-2005) - 71008-AM011 - Rzcrewgarage","id":22330848936118,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-viii-ct9a-2003-2005-rzcrew.jpg?v=1710326215"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-viii-ct9a-2003-2005-rzcrew.jpg?v=1710326215","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- Not compatible with GT-A models\u003cbr\u003e- Not be used with piping kit\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution VIII - CT9A (2003-2005) 4G63\u003c!--split--\u003e"}

{"id":6572369510582,"title":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution Wagon CT9W (2003-2006)","handle":"hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-wagon-ct9w-2003-2006-71008-am011","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- Not compatible with GT-A models\u003cbr\u003e- Not be used with piping kit\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution Wagon - CT9W (2003-2006) 4G63\u003c!--split--\u003e","published_at":"2021-03-12T11:17:09+08:00","created_at":"2021-03-12T11:17:10+08:00","vendor":"Hks","type":"Universal Blow Off Valves","tags":["2003","2004","2005","2006","forced-induction","hks","jp1","lancer-evolution-wagon-ct9w-2003-2006-tc-4g63t-mivec-i4","mitsubishi","universal-blow-off-valves","ws122"],"price":25740,"price_min":25740,"price_max":25740,"available":true,"price_varies":false,"compare_at_price":33000,"compare_at_price_min":33000,"compare_at_price_max":33000,"compare_at_price_varies":false,"variants":[{"id":39347323568310,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"71008-AM011","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution Wagon CT9W (2003-2006)","public_title":null,"options":["Default Title"],"price":25740,"weight":3000,"compare_at_price":33000,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-wagon-ct9w-2003-2006-rzcrew.jpg?v=1710326215"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-wagon-ct9w-2003-2006-rzcrew.jpg?v=1710326215","options":["Title"],"media":[{"alt":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution Wagon CT9W (2003-2006) - 71008-AM011 - Rzcrewgarage","id":22330849001654,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-wagon-ct9w-2003-2006-rzcrew.jpg?v=1710326215"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-wagon-ct9w-2003-2006-rzcrew.jpg?v=1710326215","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- Not compatible with GT-A models\u003cbr\u003e- Not be used with piping kit\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution Wagon - CT9W (2003-2006) 4G63\u003c!--split--\u003e"}

{"id":6572369543350,"title":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution X CZ4A (2007-2017)","handle":"hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-x-cz4a-2007-2017-71008-am015","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution X - CZ4A (2007-2008) 4B11\u003cbr\u003eMitsubishi - Lancer Evolution X - CZ4A (2008-2009) 4B11\u003cbr\u003eMitsubishi - Lancer Evolution X - CZ4A (2009-2017) 4B11\u003c!--split--\u003e","published_at":"2021-03-12T11:17:11+08:00","created_at":"2021-03-12T11:17:11+08:00","vendor":"Hks","type":"Universal Blow Off Valves","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","forced-induction","hks","jp1","lancer-evolution-x-cz4a-chuki-rs-jdmgsr-2008-2009-tc-4b11-i4","lancer-evolution-x-cz4a-kouki-rs-jdmgsr-2009-2017-tc-4b11-i4","lancer-evolution-x-cz4a-zenki-rs-jdmgsr-2007-2008-tc-4b11-i4","mitsubishi","universal-blow-off-valves","ws122"],"price":29562,"price_min":29562,"price_max":29562,"available":true,"price_varies":false,"compare_at_price":37900,"compare_at_price_min":37900,"compare_at_price_max":37900,"compare_at_price_varies":false,"variants":[{"id":39347323601078,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"71008-AM015","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution X CZ4A (2007-2017)","public_title":null,"options":["Default Title"],"price":29562,"weight":3000,"compare_at_price":37900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-x-cz4a-2007-2017-rzcrew.jpg?v=1710326215"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-x-cz4a-2007-2017-rzcrew.jpg?v=1710326215","options":["Title"],"media":[{"alt":"HKS Super SQV IV Sequential Blow Off Valve Kit - Mitsubishi Lancer Evolution X CZ4A (2007-2017) - 71008-AM015 - Rzcrewgarage","id":22330850574518,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-x-cz4a-2007-2017-rzcrew.jpg?v=1710326215"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-iv-sequential-blow-off-valve-kit-mitsubishi-lancer-evolution-x-cz4a-2007-2017-rzcrew.jpg?v=1710326215","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e- High Quality Aluminum Based Die-cast Body:\u003cbr\u003eClear Coated aluminum die-cast body. Combines the ultimate in looks and durability in the engine compartment.\u003cbr\u003e\u003cbr\u003e- Triple Fin Design Produces Super Sound:\u003cbr\u003eTriple Fins set at the center of the funnel produces a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning.\u003cbr\u003e\u003cbr\u003e- Recirculation Fitting:\u003cbr\u003eThe triple fin can be replaced with the recirculation fitting, which can be used to reroute discharged air back to the intake tract (hose not included). All Vehicle specific application kits will include a 19mm, 29mm (depending on vehicle) Recirculation fitting.\u003cbr\u003e\u003cbr\u003e- Pull-Type blow off valves work for any turbocharged vehicle, from stock to highly tuned.\u003cbr\u003eTypical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reach. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe Super SQV IV uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles. To assure buyers that they are purchasing an authentic HKS product, the new design incorporates a holographic HKS logo on the back of the valve, as well as additional HKS logos cast onto the body structure. The Super SQV IV uses the same mounting flanges as all previous generation SSQV's to assure compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution X - CZ4A (2007-2008) 4B11\u003cbr\u003eMitsubishi - Lancer Evolution X - CZ4A (2008-2009) 4B11\u003cbr\u003eMitsubishi - Lancer Evolution X - CZ4A (2009-2017) 4B11\u003c!--split--\u003e"}

{"id":6572368986294,"title":"HKS Super SQV Suction Return Kit - Mitsubishi Lancer Evolution IX CT9A (2005-2007)","handle":"hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-ix-ct9a-2005-2007-71002-am002","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eKit Includes:\u003cbr\u003e- All the Gray parts on picture\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe HKS Super SQV Suction Return Kit Mitsubishi Lancer Evolution VII~IX CT9A CT9W will ensures your vehicle legality by haing the air returning to the suction like the stock air bypass valve. This process sill reduce the sound of the Blow-off valve, but more sound will come out from the Air cleaner.Upon purchasing please state the car from the compatibility list that you would like to have the HKS Suction Return Kit for.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution IX - CT9A (2005-2007) 4G63\u003c!--split--\u003e","published_at":"2021-03-12T11:16:48+08:00","created_at":"2021-03-12T11:16:49+08:00","vendor":"Hks","type":"Universal Blow Off Valves","tags":["2005","2006","2007","forced-induction","hks","jp1","lancer-evolution-ix-ct9a-2005-2007-tc-4g63t-mivec-i4","mitsubishi","universal-blow-off-valves","ws12"],"price":7742,"price_min":7742,"price_max":7742,"available":true,"price_varies":false,"compare_at_price":7900,"compare_at_price_min":7900,"compare_at_price_max":7900,"compare_at_price_varies":false,"variants":[{"id":39347320193206,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"71002-AM002","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Super SQV Suction Return Kit - Mitsubishi Lancer Evolution IX CT9A (2005-2007)","public_title":null,"options":["Default Title"],"price":7742,"weight":1000,"compare_at_price":7900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-ix-ct9a-2005-2007-rzcrew.jpg?v=1710326218"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-ix-ct9a-2005-2007-rzcrew.jpg?v=1710326218","options":["Title"],"media":[{"alt":"HKS Super SQV Suction Return Kit - Mitsubishi Lancer Evolution IX CT9A (2005-2007) - 71002-AM002 - Rzcrewgarage","id":22330846380214,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-ix-ct9a-2005-2007-rzcrew.jpg?v=1710326218"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-ix-ct9a-2005-2007-rzcrew.jpg?v=1710326218","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eKit Includes:\u003cbr\u003e- All the Gray parts on picture\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe HKS Super SQV Suction Return Kit Mitsubishi Lancer Evolution VII~IX CT9A CT9W will ensures your vehicle legality by haing the air returning to the suction like the stock air bypass valve. This process sill reduce the sound of the Blow-off valve, but more sound will come out from the Air cleaner.Upon purchasing please state the car from the compatibility list that you would like to have the HKS Suction Return Kit for.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution IX - CT9A (2005-2007) 4G63\u003c!--split--\u003e"}

{"id":6572369019062,"title":"HKS Super SQV Suction Return Kit - Mitsubishi Lancer Evolution VII CT9A (2001-2002)","handle":"hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-vii-ct9a-2001-2002-71002-am002","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eKit Includes:\u003cbr\u003e- All the Gray parts on picture\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe HKS Super SQV Suction Return Kit Mitsubishi Lancer Evolution VII~IX CT9A CT9W will ensures your vehicle legality by haing the air returning to the suction like the stock air bypass valve. This process sill reduce the sound of the Blow-off valve, but more sound will come out from the Air cleaner.Upon purchasing please state the car from the compatibility list that you would like to have the HKS Suction Return Kit for.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution VII - CT9A (2001-2002) 4G63\u003c!--split--\u003e","published_at":"2021-03-12T11:16:49+08:00","created_at":"2021-03-12T11:16:50+08:00","vendor":"Hks","type":"Universal Blow Off Valves","tags":["2001","2002","forced-induction","hks","jp1","lancer-evolution-vii-ct9a-2001-2002-tc-4g63t-3rd-gen-i4","mitsubishi","universal-blow-off-valves","ws12"],"price":7742,"price_min":7742,"price_max":7742,"available":true,"price_varies":false,"compare_at_price":7900,"compare_at_price_min":7900,"compare_at_price_max":7900,"compare_at_price_varies":false,"variants":[{"id":39347321209014,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"71002-AM002","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Super SQV Suction Return Kit - Mitsubishi Lancer Evolution VII CT9A (2001-2002)","public_title":null,"options":["Default Title"],"price":7742,"weight":1000,"compare_at_price":7900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-vii-ct9a-2001-2002-rzcrew.jpg?v=1710326218"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-vii-ct9a-2001-2002-rzcrew.jpg?v=1710326218","options":["Title"],"media":[{"alt":"HKS Super SQV Suction Return Kit - Mitsubishi Lancer Evolution VII CT9A (2001-2002) - 71002-AM002 - Rzcrewgarage","id":22330846576822,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-vii-ct9a-2001-2002-rzcrew.jpg?v=1710326218"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-vii-ct9a-2001-2002-rzcrew.jpg?v=1710326218","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eKit Includes:\u003cbr\u003e- All the Gray parts on picture\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe HKS Super SQV Suction Return Kit Mitsubishi Lancer Evolution VII~IX CT9A CT9W will ensures your vehicle legality by haing the air returning to the suction like the stock air bypass valve. This process sill reduce the sound of the Blow-off valve, but more sound will come out from the Air cleaner.Upon purchasing please state the car from the compatibility list that you would like to have the HKS Suction Return Kit for.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution VII - CT9A (2001-2002) 4G63\u003c!--split--\u003e"}

{"id":6572369051830,"title":"HKS Super SQV Suction Return Kit - Mitsubishi Lancer Evolution VIII CT9A (2003-2005)","handle":"hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-viii-ct9a-2003-2005-71002-am002","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eKit Includes:\u003cbr\u003e- All the Gray parts on picture\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe HKS Super SQV Suction Return Kit Mitsubishi Lancer Evolution VII~IX CT9A CT9W will ensures your vehicle legality by haing the air returning to the suction like the stock air bypass valve. This process sill reduce the sound of the Blow-off valve, but more sound will come out from the Air cleaner.Upon purchasing please state the car from the compatibility list that you would like to have the HKS Suction Return Kit for.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution VIII - CT9A (2003-2005) 4G63\u003c!--split--\u003e","published_at":"2021-03-12T11:16:51+08:00","created_at":"2021-03-12T11:16:51+08:00","vendor":"Hks","type":"Universal Blow Off Valves","tags":["2003","2004","2005","forced-induction","hks","jp1","lancer-evolution-viii-ct9a-2003-2005-tc-4g63t-mivec-i4","mitsubishi","universal-blow-off-valves","ws12"],"price":7742,"price_min":7742,"price_max":7742,"available":true,"price_varies":false,"compare_at_price":7900,"compare_at_price_min":7900,"compare_at_price_max":7900,"compare_at_price_varies":false,"variants":[{"id":39347321241782,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"71002-AM002","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Super SQV Suction Return Kit - Mitsubishi Lancer Evolution VIII CT9A (2003-2005)","public_title":null,"options":["Default Title"],"price":7742,"weight":1000,"compare_at_price":7900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-viii-ct9a-2003-2005-rzcrew.jpg?v=1710326218"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-viii-ct9a-2003-2005-rzcrew.jpg?v=1710326218","options":["Title"],"media":[{"alt":"HKS Super SQV Suction Return Kit - Mitsubishi Lancer Evolution VIII CT9A (2003-2005) - 71002-AM002 - Rzcrewgarage","id":22330846675126,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-viii-ct9a-2003-2005-rzcrew.jpg?v=1710326218"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-viii-ct9a-2003-2005-rzcrew.jpg?v=1710326218","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eKit Includes:\u003cbr\u003e- All the Gray parts on picture\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe HKS Super SQV Suction Return Kit Mitsubishi Lancer Evolution VII~IX CT9A CT9W will ensures your vehicle legality by haing the air returning to the suction like the stock air bypass valve. This process sill reduce the sound of the Blow-off valve, but more sound will come out from the Air cleaner.Upon purchasing please state the car from the compatibility list that you would like to have the HKS Suction Return Kit for.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution VIII - CT9A (2003-2005) 4G63\u003c!--split--\u003e"}

{"id":6572369084598,"title":"HKS Super SQV Suction Return Kit - Mitsubishi Lancer Evolution Wagon CT9W (2003-2006)","handle":"hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-wagon-ct9w-2003-2006-71002-am002","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eKit Includes:\u003cbr\u003e- All the Gray parts on picture\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe HKS Super SQV Suction Return Kit Mitsubishi Lancer Evolution VII~IX CT9A CT9W will ensures your vehicle legality by haing the air returning to the suction like the stock air bypass valve. This process sill reduce the sound of the Blow-off valve, but more sound will come out from the Air cleaner.Upon purchasing please state the car from the compatibility list that you would like to have the HKS Suction Return Kit for.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution Wagon - CT9W (2003-2006) 4G63\u003c!--split--\u003e","published_at":"2021-03-12T11:16:52+08:00","created_at":"2021-03-12T11:16:52+08:00","vendor":"Hks","type":"Universal Blow Off Valves","tags":["2003","2004","2005","2006","forced-induction","hks","jp1","lancer-evolution-wagon-ct9w-2003-2006-tc-4g63t-mivec-i4","mitsubishi","universal-blow-off-valves","ws12"],"price":7742,"price_min":7742,"price_max":7742,"available":true,"price_varies":false,"compare_at_price":7900,"compare_at_price_min":7900,"compare_at_price_max":7900,"compare_at_price_varies":false,"variants":[{"id":39347321274550,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"71002-AM002","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Super SQV Suction Return Kit - Mitsubishi Lancer Evolution Wagon CT9W (2003-2006)","public_title":null,"options":["Default Title"],"price":7742,"weight":1000,"compare_at_price":7900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-wagon-ct9w-2003-2006-rzcrew.jpg?v=1710326218"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-wagon-ct9w-2003-2006-rzcrew.jpg?v=1710326218","options":["Title"],"media":[{"alt":"HKS Super SQV Suction Return Kit - Mitsubishi Lancer Evolution Wagon CT9W (2003-2006) - 71002-AM002 - Rzcrewgarage","id":22330846806198,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-wagon-ct9w-2003-2006-rzcrew.jpg?v=1710326218"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/hks-super-sqv-suction-return-kit-mitsubishi-lancer-evolution-wagon-ct9w-2003-2006-rzcrew.jpg?v=1710326218","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Hks\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eKit Includes:\u003cbr\u003e- All the Gray parts on picture\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe HKS Super SQV Suction Return Kit Mitsubishi Lancer Evolution VII~IX CT9A CT9W will ensures your vehicle legality by haing the air returning to the suction like the stock air bypass valve. This process sill reduce the sound of the Blow-off valve, but more sound will come out from the Air cleaner.Upon purchasing please state the car from the compatibility list that you would like to have the HKS Suction Return Kit for.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution Wagon - CT9W (2003-2006) 4G63\u003c!--split--\u003e"}