Mitsubishi

{"id":7647328600246,"title":"Recaro Japan - Base Frame Seat Rail Standard - Mitsubishi - GTO Z15A\/Z16A","handle":"recaro-japan-base-frame-seat-rail-standard-mitsubishi-gto-z15a-z16a","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003eReference Number: 2083.032.1\/ 2083.032.2\u003cbr\u003e\u003cbr\u003ePosition: \u003cbr\u003eNew structure frame. One position type.\u003cbr\u003eNotes and Remarks:\u003cbr\u003eHandle offset about 30mm door side (Recaro is closer to the door side).\u003cbr\u003e\u003cbr\u003e(Caution) It can only be attached to the seats listed in the matching information below. Includes side airbag canceller.\u003cbr\u003e\u003cbr\u003eCS, CSE, CT, and C classes use spacers, so the seating position is higher for the spacer. For the RS\/TS-# series, the handle offset can be adjusted in 5mm increments from 5mm up to 15mm by using the offset adapter set for RS\/TS-G (product number 1700001J). (When installing, please consult with your dealer about interference with the console side (shift, etc.)) Adjust the RMS to the optimum position (front\/rear height, left\/right offset 0\/5\/10mm) with the RMS side adapter (sold separately). Please put it on. In addition, even if there is interference with the interior, it is possible to soften it by adjusting. Please adjust the RCS to the optimum position (front\/rear height, left\/right offset 0\/5\/10mm) with the RCS side adapter (sold separately).\u003cbr\u003e\u003cbr\u003e Seat Fitting:\u003cbr\u003e This seat rail fits:\u003cbr\u003e\u003cbr\u003eLX \/ LX- # \/ LX-VS \/ LX-VF \/ LX-VL \/ Ergomed \/ Ergomed C \/ Ergomed D \/ Ergomed E \/ Ergomed LD \/ Ergomed MV (IS-84 base)\u003cbr\u003e\t\nLX-F (based on IS-05)\u003cbr\u003e\t\nLS \/ LS- # \/ LT- #\t\u003cbr\u003e\nRMS2600A \/ 2700G\tYou need to prepare the side adapter separately.\u003cbr\u003e\nNew Orthopedo (with Recaro Vent)\u003cbr\u003e\t\nRCS\tYou need to prepare the side adapter separately.\u003cbr\u003e\nSR-2 late model \/ SR-3 \/ SR-4 \/ SR-5 \/ SR-VF \/ SR-IMPACT \/ SR-IMPACT Pro\u003cbr\u003e\t\nRally Special \/ First SR \/ SR-2 Early Type\u003cbr\u003e\t\nLate model A-8\u003cbr\u003e\t\nEarly model A-8\u003cbr\u003e\t\nSP-A \/ SP-G \/ SP-G2 \/ SP-G3 \/ SP-GT \/ SP-GT2\tYou need to prepare the side adapter separately.\u003cbr\u003e\nSP-AN \/ SP-GN \/ SP-GN 2\tYou need to prepare the side adapter separately.\u003cbr\u003e\nRACER SP-G \/ A\tYou need to prepare the side adapter separately.\u003cbr\u003e\nAM19 TREND-J\u003cbr\u003e\nAM19 TREND-JJ\u003cbr\u003e\nAM19 TREND-JC\u003cbr\u003e\t\nAM19 STYLE-J\u003cbr\u003e\nAM19 STYLE-JJ\u003cbr\u003e\nAM19 STYLE-JC\u003cbr\u003e\t\nAM19 SPORT-J\u003cbr\u003e\nAM19 SPORT-JJ\u003cbr\u003e\nAM19 SPORT-JC\u003cbr\u003e\t\nAM19 TREND-JS\u003cbr\u003e\t\nAM19 STYLE-JS\u003cbr\u003e\t\nAM19 SPORT-JS\u003cbr\u003e\t\nAM19 TREND-D\u003cbr\u003e\nAM19 TREND-DC\u003cbr\u003e\t\nAM19 STYLE-D\u003cbr\u003e\nAM19 STYLE-DC\t\u003cbr\u003e\nAM19 SPORT-D \u003cbr\u003eAM19\u003cbr\u003e\nSPORT-DC\u003cbr\u003e\nMAGNIFICA CL222HV\u003cbr\u003e\t\nTS-G \/ RS-G \/ TS-W \/ RS-W\tYou need to prepare the side adapter separately.\u003cbr\u003e\nSP-X\u003cbr\u003e\t\nSR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e\t\nSportster \/ Cross Sportster\t\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eGTO | Z15A Kouki | 1990-2000 | TT | 6G72 | V6,GTO | Z16A Zenki | 1990-2000 | TT | 6G72 | V6\u003c!--split--\u003e","published_at":"2023-08-22T09:21:45+08:00","created_at":"2023-08-22T09:20:26+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","gto-z15a-kouki-1990-2000-tt-6g72-v6","gto-z16a-zenki-1990-2000-tt-6g72-v6","jp1","mitsubishi","recaro-japan","seat-rails","ws12","Z15A\/Z16A"],"price":21266,"price_min":21266,"price_max":21266,"available":true,"price_varies":false,"compare_at_price":21700,"compare_at_price_min":21700,"compare_at_price_max":21700,"compare_at_price_varies":false,"variants":[{"id":42350811414710,"title":"Left","option1":"Left","option2":null,"option3":null,"sku":"2083.032.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard - Mitsubishi - GTO Z15A\/Z16A - Left","public_title":"Left","options":["Left"],"price":21266,"weight":17000,"compare_at_price":21700,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42350811447478,"title":"Right","option1":"Right","option2":null,"option3":null,"sku":"2083.032.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard - Mitsubishi - GTO Z15A\/Z16A - Right","public_title":"Right","options":["Right"],"price":21266,"weight":17000,"compare_at_price":21700,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-mitsubishi-gto-z15az16a-rzcrew-1.jpg?v=1710314872","\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-mitsubishi-gto-z15az16a-rzcrew-2.jpg?v=1710314873"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-mitsubishi-gto-z15az16a-rzcrew-1.jpg?v=1710314872","options":["Side"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard - Mitsubishi - GTO Z15A\/Z16A","id":26516236370102,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-mitsubishi-gto-z15az16a-rzcrew-1.jpg?v=1710314872"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-mitsubishi-gto-z15az16a-rzcrew-1.jpg?v=1710314872","width":640},{"alt":"Recaro Japan - Base Frame Seat Rail Standard - Mitsubishi - GTO Z15A\/Z16A - [variant sku] - RZCrewGarage","id":26516236402870,"position":2,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-mitsubishi-gto-z15az16a-rzcrew-2.jpg?v=1710314873"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-mitsubishi-gto-z15az16a-rzcrew-2.jpg?v=1710314873","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003eReference Number: 2083.032.1\/ 2083.032.2\u003cbr\u003e\u003cbr\u003ePosition: \u003cbr\u003eNew structure frame. One position type.\u003cbr\u003eNotes and Remarks:\u003cbr\u003eHandle offset about 30mm door side (Recaro is closer to the door side).\u003cbr\u003e\u003cbr\u003e(Caution) It can only be attached to the seats listed in the matching information below. Includes side airbag canceller.\u003cbr\u003e\u003cbr\u003eCS, CSE, CT, and C classes use spacers, so the seating position is higher for the spacer. For the RS\/TS-# series, the handle offset can be adjusted in 5mm increments from 5mm up to 15mm by using the offset adapter set for RS\/TS-G (product number 1700001J). (When installing, please consult with your dealer about interference with the console side (shift, etc.)) Adjust the RMS to the optimum position (front\/rear height, left\/right offset 0\/5\/10mm) with the RMS side adapter (sold separately). Please put it on. In addition, even if there is interference with the interior, it is possible to soften it by adjusting. Please adjust the RCS to the optimum position (front\/rear height, left\/right offset 0\/5\/10mm) with the RCS side adapter (sold separately).\u003cbr\u003e\u003cbr\u003e Seat Fitting:\u003cbr\u003e This seat rail fits:\u003cbr\u003e\u003cbr\u003eLX \/ LX- # \/ LX-VS \/ LX-VF \/ LX-VL \/ Ergomed \/ Ergomed C \/ Ergomed D \/ Ergomed E \/ Ergomed LD \/ Ergomed MV (IS-84 base)\u003cbr\u003e\t\nLX-F (based on IS-05)\u003cbr\u003e\t\nLS \/ LS- # \/ LT- #\t\u003cbr\u003e\nRMS2600A \/ 2700G\tYou need to prepare the side adapter separately.\u003cbr\u003e\nNew Orthopedo (with Recaro Vent)\u003cbr\u003e\t\nRCS\tYou need to prepare the side adapter separately.\u003cbr\u003e\nSR-2 late model \/ SR-3 \/ SR-4 \/ SR-5 \/ SR-VF \/ SR-IMPACT \/ SR-IMPACT Pro\u003cbr\u003e\t\nRally Special \/ First SR \/ SR-2 Early Type\u003cbr\u003e\t\nLate model A-8\u003cbr\u003e\t\nEarly model A-8\u003cbr\u003e\t\nSP-A \/ SP-G \/ SP-G2 \/ SP-G3 \/ SP-GT \/ SP-GT2\tYou need to prepare the side adapter separately.\u003cbr\u003e\nSP-AN \/ SP-GN \/ SP-GN 2\tYou need to prepare the side adapter separately.\u003cbr\u003e\nRACER SP-G \/ A\tYou need to prepare the side adapter separately.\u003cbr\u003e\nAM19 TREND-J\u003cbr\u003e\nAM19 TREND-JJ\u003cbr\u003e\nAM19 TREND-JC\u003cbr\u003e\t\nAM19 STYLE-J\u003cbr\u003e\nAM19 STYLE-JJ\u003cbr\u003e\nAM19 STYLE-JC\u003cbr\u003e\t\nAM19 SPORT-J\u003cbr\u003e\nAM19 SPORT-JJ\u003cbr\u003e\nAM19 SPORT-JC\u003cbr\u003e\t\nAM19 TREND-JS\u003cbr\u003e\t\nAM19 STYLE-JS\u003cbr\u003e\t\nAM19 SPORT-JS\u003cbr\u003e\t\nAM19 TREND-D\u003cbr\u003e\nAM19 TREND-DC\u003cbr\u003e\t\nAM19 STYLE-D\u003cbr\u003e\nAM19 STYLE-DC\t\u003cbr\u003e\nAM19 SPORT-D \u003cbr\u003eAM19\u003cbr\u003e\nSPORT-DC\u003cbr\u003e\nMAGNIFICA CL222HV\u003cbr\u003e\t\nTS-G \/ RS-G \/ TS-W \/ RS-W\tYou need to prepare the side adapter separately.\u003cbr\u003e\nSP-X\u003cbr\u003e\t\nSR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e\t\nSportster \/ Cross Sportster\t\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eGTO | Z15A Kouki | 1990-2000 | TT | 6G72 | V6,GTO | Z16A Zenki | 1990-2000 | TT | 6G72 | V6\u003c!--split--\u003e"}

{"id":7575756374198,"title":"Recaro Japan - Base Frame Seat Rail Standard For SPG Series - Mitsubishi - Lancer Evolution CP9A Evo 4\/5\/6","handle":"recaro-japan-base-frame-seat-rail-standard-for-spg-series-mitsubishi-lancer-evolution-cp9a-evo-4-5-6","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003eReference Number: 2083.018.1\/ 2083.018.2\u003cbr\u003e\u003cbr\u003ePosition: \u003cbr\u003eNew structure frame. One position type.\u003cbr\u003eNotes and Remarks:\u003cbr\u003e(Note) This product cannot be installed on seats other than those listed in the matching information below. competition frame. Install using the side adapter for the competition frame that comes with the base frame.\u003cbr\u003e\u003cbr\u003eProfile and profile cannot be installed.\u003cbr\u003e\u003cbr\u003eThe seating position is about 15mm lower than the stock.\u003cbr\u003e\u003cbr\u003e Seat Fitting:\u003cbr\u003e This seat rail fits:\u003cbr\u003e\u003cbr\u003eFor SP-#, SP-#N, TS-#, and RS-#, t\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eLancer Evolution IV | CN9A | 1996-1997 | TC | 4G63T 2nd Gen | I4,Lancer Evolution V | CP9A | 1998-1999 | TC | 4G63T 2nd Gen | I4,Lancer Evolution VI | CP9A | 1999-2001 | TC | 4G63T 2nd Gen | I4\u003c!--split--\u003e","published_at":"2023-03-20T15:19:06+08:00","created_at":"2023-03-20T10:40:53+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["1996","1997","1998","1999","CP9A Evo 4\/5\/6","jp1","lancer-evolution-iv-cn9a-1996-1997-tc-4g63t-2nd-gen-i4","lancer-evolution-v-cp9a-1998-1999-tc-4g63t-2nd-gen-i4","lancer-evolution-vi-cp9a-1999-2001-tc-4g63t-2nd-gen-i4","mitsubishi","recaro-japan","seat-rails","ws12"],"price":21266,"price_min":21266,"price_max":21266,"available":true,"price_varies":false,"compare_at_price":21700,"compare_at_price_min":21700,"compare_at_price_max":21700,"compare_at_price_varies":false,"variants":[{"id":42161053696182,"title":"Left","option1":"Left","option2":null,"option3":null,"sku":"2083.018.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard For SPG Series - Mitsubishi - Lancer Evolution CP9A Evo 4\/5\/6 - Left","public_title":"Left","options":["Left"],"price":21266,"weight":17000,"compare_at_price":21700,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42161053728950,"title":"Right","option1":"Right","option2":null,"option3":null,"sku":"2083.018.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard For SPG Series - Mitsubishi - Lancer Evolution CP9A Evo 4\/5\/6 - Right","public_title":"Right","options":["Right"],"price":21266,"weight":17000,"compare_at_price":21700,"inventory_quantity":45,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-for-spg-series-mitsubishi-lancer-evolution-cp9a-evo-456-rzcrew-1.jpg?v=1710317711","\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-for-spg-series-mitsubishi-lancer-evolution-cp9a-evo-456-rzcrew-2.jpg?v=1710317713"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-for-spg-series-mitsubishi-lancer-evolution-cp9a-evo-456-rzcrew-1.jpg?v=1710317711","options":["Side"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard For SPG Series - Mitsubishi - Lancer Evolution CP9A Evo 4\/5\/6","id":26040728387766,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-for-spg-series-mitsubishi-lancer-evolution-cp9a-evo-456-rzcrew-1.jpg?v=1710317711"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-for-spg-series-mitsubishi-lancer-evolution-cp9a-evo-456-rzcrew-1.jpg?v=1710317711","width":640},{"alt":"Recaro Japan - Base Frame Seat Rail Standard For SPG Series - Mitsubishi - Lancer Evolution CP9A Evo 4\/5\/6 - [variant sku] - RZCrewGarage","id":26040728420534,"position":2,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-for-spg-series-mitsubishi-lancer-evolution-cp9a-evo-456-rzcrew-2.jpg?v=1710317713"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-for-spg-series-mitsubishi-lancer-evolution-cp9a-evo-456-rzcrew-2.jpg?v=1710317713","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003eReference Number: 2083.018.1\/ 2083.018.2\u003cbr\u003e\u003cbr\u003ePosition: \u003cbr\u003eNew structure frame. One position type.\u003cbr\u003eNotes and Remarks:\u003cbr\u003e(Note) This product cannot be installed on seats other than those listed in the matching information below. competition frame. Install using the side adapter for the competition frame that comes with the base frame.\u003cbr\u003e\u003cbr\u003eProfile and profile cannot be installed.\u003cbr\u003e\u003cbr\u003eThe seating position is about 15mm lower than the stock.\u003cbr\u003e\u003cbr\u003e Seat Fitting:\u003cbr\u003e This seat rail fits:\u003cbr\u003e\u003cbr\u003eFor SP-#, SP-#N, TS-#, and RS-#, t\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eLancer Evolution IV | CN9A | 1996-1997 | TC | 4G63T 2nd Gen | I4,Lancer Evolution V | CP9A | 1998-1999 | TC | 4G63T 2nd Gen | I4,Lancer Evolution VI | CP9A | 1999-2001 | TC | 4G63T 2nd Gen | I4\u003c!--split--\u003e"}

{"id":6252861194422,"title":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Airtrek CU2W\/CU4W (2001-2005)","handle":"recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-airtrek-cu2w-cu4w-2001-2005-2083-271-1","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position:10mm higher than OEM seat.(Middle position of 3 position baseframe with ST-JJ) After minor change car is unconfirmed.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.\u003cbr\u003e- Trend-J,JJ,JC,D,DCfor back rest side and DoorArm Rest approximately 10mm interfere.SR-1,2for back rest side and DoorArm Rest approximately 10mm interfere.Racer,SP-# needs SP-G offset adapter (PN 1600094. CS,CSE uses spacer therefore seat position will be higher.CT,C-classicrecliner cover on center console side needs to be removed,seat height is raised due to use of spacers.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE \u003cbr\u003e- CT: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- C-Classic: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Airtrek - CU2W (2004-2005) 4G63\u003cbr\u003eMitsubishi - Airtrek - CU2W (2001-2003) 4G63\u003cbr\u003eMitsubishi - Airtrek - CU4W (2001-2003) 4G64\u003c!--split--\u003e","published_at":"2021-02-08T18:11:40+08:00","created_at":"2021-02-08T18:11:41+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2001","2002","2003","2004","2005","airtrek-cu2w-kouki-2004-2005-tc-4g63-i4","airtrek-cu2w-zenki-2001-2003-tc-4g63-i4","airtrek-cu4w-2001-2003-na-4g64-dohc-i4","left","mitsubishi","recaro-japan","seat-rails","ws10"],"price":21600,"price_min":21600,"price_max":21600,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38014277222582,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2083.271.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Airtrek CU2W\/CU4W (2001-2005)","public_title":null,"options":["Default Title"],"price":21600,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-airtrek-cu2wcu4w-2001-2005-rzcrew.jpg?v=1710330994"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-airtrek-cu2wcu4w-2001-2005-rzcrew.jpg?v=1710330994","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Airtrek CU2W\/CU4W (2001-2005) - 2083.271.1 - Rzcrewgarage","id":25433081938102,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-airtrek-cu2wcu4w-2001-2005-rzcrew.jpg?v=1710330994"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-airtrek-cu2wcu4w-2001-2005-rzcrew.jpg?v=1710330994","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position:10mm higher than OEM seat.(Middle position of 3 position baseframe with ST-JJ) After minor change car is unconfirmed.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.\u003cbr\u003e- Trend-J,JJ,JC,D,DCfor back rest side and DoorArm Rest approximately 10mm interfere.SR-1,2for back rest side and DoorArm Rest approximately 10mm interfere.Racer,SP-# needs SP-G offset adapter (PN 1600094. CS,CSE uses spacer therefore seat position will be higher.CT,C-classicrecliner cover on center console side needs to be removed,seat height is raised due to use of spacers.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE \u003cbr\u003e- CT: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- C-Classic: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Airtrek - CU2W (2004-2005) 4G63\u003cbr\u003eMitsubishi - Airtrek - CU2W (2001-2003) 4G63\u003cbr\u003eMitsubishi - Airtrek - CU4W (2001-2003) 4G64\u003c!--split--\u003e"}

{"id":6252861489334,"title":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Colt Ralliart Z27A (2004-2006)","handle":"recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-colt-ralliart-z27a-2004-2006-2083-281-1","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as lowermost OEM seat. (Middle position of 3 position of rail with ST-JJ)Bench seat is unconfirmed.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.For non-side airbag car only. Separate seat car. Cold climate area specification is unconfirmed.\u003cbr\u003e- CS,CSE ,CT,C-classic reclining cover on center console side must be removed. ,seat height is raised due to use of spacers.SR-1,2,SP-#�¯shoulder area andB-Pillar couple mm. interfere.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- CSE : Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- CT: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- C-Classic: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Colt Ralliart - Z27A (2004-2006) 4G15\u003c!--split--\u003e","published_at":"2021-02-08T18:11:46+08:00","created_at":"2021-02-08T18:11:47+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2004","2005","2006","colt-ralliart-z27a-2004-2006-na-4g15-dohc-i4","left","mitsubishi","recaro-japan","seat-rails","ws10"],"price":21600,"price_min":21600,"price_max":21600,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38014277714102,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2083.281.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Colt Ralliart Z27A (2004-2006)","public_title":null,"options":["Default Title"],"price":21600,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-colt-ralliart-z27a-2004-2006-rzcrew.jpg?v=1710330992"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-colt-ralliart-z27a-2004-2006-rzcrew.jpg?v=1710330992","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Colt Ralliart Z27A (2004-2006) - 2083.281.1 - Rzcrewgarage","id":25433083412662,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-colt-ralliart-z27a-2004-2006-rzcrew.jpg?v=1710330992"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-colt-ralliart-z27a-2004-2006-rzcrew.jpg?v=1710330992","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as lowermost OEM seat. (Middle position of 3 position of rail with ST-JJ)Bench seat is unconfirmed.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.For non-side airbag car only. Separate seat car. Cold climate area specification is unconfirmed.\u003cbr\u003e- CS,CSE ,CT,C-classic reclining cover on center console side must be removed. ,seat height is raised due to use of spacers.SR-1,2,SP-#�¯shoulder area andB-Pillar couple mm. interfere.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- CSE : Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- CT: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- C-Classic: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Colt Ralliart - Z27A (2004-2006) 4G15\u003c!--split--\u003e"}

{"id":6252861522102,"title":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Colt Z21A\/Z22A\/Z23A\/Z24A\/Z25A\/Z26A\/Z27A\/Z28A (2002-2018)","handle":"recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-colt-z21a-z22a-z23a-z24a-z25a-z26a-z27a-z28a-2002-2018-2083-281-1","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as lowermost OEM seat. (Middle position of 3 position of rail with ST-JJ)Bench seat is unconfirmed.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.For non-side airbag car only. Separate seat car. Cold climate area specification is unconfirmed.\u003cbr\u003e- CS,CSE ,CT,C-classic reclining cover on center console side must be removed. ,seat height is raised due to use of spacers.SR-1,2,SP-#�¯shoulder area andB-Pillar couple mm. interfere.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- CSE : Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- CT: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- C-Classic: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Colt - Z21A (2004-2018) 4A90\u003cbr\u003eMitsubishi - Colt - Z21A (2002-2004) 4A90\u003cbr\u003eMitsubishi - Colt - Z22A (2004-2018) 4A90\u003cbr\u003eMitsubishi - Colt - Z23A (2004-2018) 4A91\u003cbr\u003eMitsubishi - Colt - Z23A (2002-2004) 4A91\u003cbr\u003eMitsubishi - Colt - Z24A (2004-2008) 4A91\u003cbr\u003eMitsubishi - Colt - Z24A (2002-2004) 4A91\u003cbr\u003eMitsubishi - Colt - Z25A (2004-2018) 4G19\u003cbr\u003eMitsubishi - Colt - Z25A (2002-2004) 4G19\u003cbr\u003eMitsubishi - Colt - Z26A (2002-2004) 4G19\u003cbr\u003eMitsubishi - Colt - Z27A (2002-2004) 4G15\u003cbr\u003eMitsubishi - Colt - Z28A (2002-2004) 4G15\u003c!--split--\u003e","published_at":"2021-02-08T18:11:47+08:00","created_at":"2021-02-08T18:11:48+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","colt-z21a-2002-2004-na-4a90-i4","colt-z21a-2004-2018-na-4a90-i4","colt-z22a-2004-2018-na-4a90-i4","colt-z23a-2002-2004-na-4a91-i4","colt-z23a-2004-2018-na-4a91-i4","colt-z24a-2002-2004-na-4a91-i4","colt-z24a-2004-2008-na-4a91-i4","colt-z25a-2002-2004-na-4g19-i4","colt-z25a-2004-2018-na-4g19-i4","colt-z26a-2002-2004-na-4g19-i4","colt-z27a-2002-2004-na-4g15-sohc-i4","colt-z28a-2002-2004-na-4g15-sohc-i4","left","mitsubishi","recaro-japan","seat-rails","ws10"],"price":21600,"price_min":21600,"price_max":21600,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38014277746870,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2083.281.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Colt Z21A\/Z22A\/Z23A\/Z24A\/Z25A\/Z26A\/Z27A\/Z28A (2002-2018)","public_title":null,"options":["Default Title"],"price":21600,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-colt-z21az22az23az24az25az26az27az28a-2002-2018-rzcrew.jpg?v=1710330992"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-colt-z21az22az23az24az25az26az27az28a-2002-2018-rzcrew.jpg?v=1710330992","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Colt Z21A\/Z22A\/Z23A\/Z24A\/Z25A\/Z26A\/Z27A\/Z28A (2002-2018) - 2083.281.1 - Rzcrewgarage","id":25433083740342,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-colt-z21az22az23az24az25az26az27az28a-2002-2018-rzcrew.jpg?v=1710330992"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-colt-z21az22az23az24az25az26az27az28a-2002-2018-rzcrew.jpg?v=1710330992","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as lowermost OEM seat. (Middle position of 3 position of rail with ST-JJ)Bench seat is unconfirmed.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.For non-side airbag car only. Separate seat car. Cold climate area specification is unconfirmed.\u003cbr\u003e- CS,CSE ,CT,C-classic reclining cover on center console side must be removed. ,seat height is raised due to use of spacers.SR-1,2,SP-#�¯shoulder area andB-Pillar couple mm. interfere.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- CSE : Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- CT: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- C-Classic: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Colt - Z21A (2004-2018) 4A90\u003cbr\u003eMitsubishi - Colt - Z21A (2002-2004) 4A90\u003cbr\u003eMitsubishi - Colt - Z22A (2004-2018) 4A90\u003cbr\u003eMitsubishi - Colt - Z23A (2004-2018) 4A91\u003cbr\u003eMitsubishi - Colt - Z23A (2002-2004) 4A91\u003cbr\u003eMitsubishi - Colt - Z24A (2004-2008) 4A91\u003cbr\u003eMitsubishi - Colt - Z24A (2002-2004) 4A91\u003cbr\u003eMitsubishi - Colt - Z25A (2004-2018) 4G19\u003cbr\u003eMitsubishi - Colt - Z25A (2002-2004) 4G19\u003cbr\u003eMitsubishi - Colt - Z26A (2002-2004) 4G19\u003cbr\u003eMitsubishi - Colt - Z27A (2002-2004) 4G15\u003cbr\u003eMitsubishi - Colt - Z28A (2002-2004) 4G15\u003c!--split--\u003e"}

{"id":6252861063350,"title":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Delica D:5 CV1W\/CV2W\/CV4W\/CV5W\/CV5W\/CV5W (2007-2018)","handle":"recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-delica-d-5-cv1w-cv2w-cv4w-cv5w-cv5w-cv5w-2007-2018-2083-232-1","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(Middle position of 3 position baseframe with ST-JJ) The length of slider is 20mm shorter than OEM seat on front side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.For non-side airbag car only.\u003cbr\u003e- CS,CT,C-classic CSE = the sitting position will be higher because of spacers usage.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE \u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Delica D:5 - CV1W (2013-2018) 4N14\u003cbr\u003eMitsubishi - Delica D:5 - CV2W (2011-2018) 4J11\u003cbr\u003eMitsubishi - Delica D:5 - CV4W (2010-2018) 4B11\u003cbr\u003eMitsubishi - Delica D:5 - CV5W (2007-2009) 4B12\u003cbr\u003eMitsubishi - Delica D:5 - CV5W (2012-2018) 4B12\u003cbr\u003eMitsubishi - Delica D:5 - CV5W (2009-2012) 4B12\u003c!--split--\u003e","published_at":"2021-02-08T18:11:38+08:00","created_at":"2021-02-08T18:11:38+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","delica-d-5-cv1w-2013-2018-tc-4n14-i4","delica-d-5-cv2w-2011-2018-na-4j11-i4","delica-d-5-cv4w-2010-2018-na-4b11-i4","delica-d-5-cv5w-2007-2009-na-4b12-i4","delica-d-5-cv5w-2009-2018-na-4b12-i4","delica-d:5-cv5w-2012-2018-na-4b12-i4","left","mitsubishi","recaro-japan","seat-rails","ws10"],"price":21600,"price_min":21600,"price_max":21600,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38014277124278,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2083.232.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Delica D:5 CV1W\/CV2W\/CV4W\/CV5W\/CV5W\/CV5W (2007-2018)","public_title":null,"options":["Default Title"],"price":21600,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-delica-d-5-cv1wcv2wcv4wcv5wcv5wcv5w-2007-2018-rzcrew.jpg?v=1710330994"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-delica-d-5-cv1wcv2wcv4wcv5wcv5wcv5w-2007-2018-rzcrew.jpg?v=1710330994","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Delica D:5 CV1W\/CV2W\/CV4W\/CV5W\/CV5W\/CV5W (2007-2018) - 2083.232.1 - Rzcrewgarage","id":25433081544886,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-delica-d-5-cv1wcv2wcv4wcv5wcv5wcv5w-2007-2018-rzcrew.jpg?v=1710330994"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-delica-d-5-cv1wcv2wcv4wcv5wcv5wcv5w-2007-2018-rzcrew.jpg?v=1710330994","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(Middle position of 3 position baseframe with ST-JJ) The length of slider is 20mm shorter than OEM seat on front side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.For non-side airbag car only.\u003cbr\u003e- CS,CT,C-classic CSE = the sitting position will be higher because of spacers usage.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE \u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Delica D:5 - CV1W (2013-2018) 4N14\u003cbr\u003eMitsubishi - Delica D:5 - CV2W (2011-2018) 4J11\u003cbr\u003eMitsubishi - Delica D:5 - CV4W (2010-2018) 4B11\u003cbr\u003eMitsubishi - Delica D:5 - CV5W (2007-2009) 4B12\u003cbr\u003eMitsubishi - Delica D:5 - CV5W (2012-2018) 4B12\u003cbr\u003eMitsubishi - Delica D:5 - CV5W (2009-2012) 4B12\u003c!--split--\u003e"}

{"id":6252862275766,"title":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Galant Fortis CY4A (2007-2018)","handle":"recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-galant-fortis-cy4a-2007-2018-2083-512-1","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position:10mm lower than OEM seat.(A case of Style-JJ)seat belt buckle and center console will rub when sliding..\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.Evolution10.Attached a side airbag canceller. Accessories and the navigation unit are unconfirmed.\u003cbr\u003e- CS,CT,C-classic CSE = the sitting position will be higher because of spacers usage.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE \u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Galant Fortis - CY4A (2007-2009) 4B11\u003cbr\u003eMitsubishi - Galant Fortis - CY4A (2009-2018) 4B11\u003c!--split--\u003e","published_at":"2021-02-08T18:12:01+08:00","created_at":"2021-02-08T18:12:01+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","galant-fortis-cy4a-2007-2009-na-4b11-i4","galant-fortis-cy4a-2009-2018-na-4b11-i4","left","mitsubishi","recaro-japan","seat-rails","ws10"],"price":21600,"price_min":21600,"price_max":21600,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38014278631606,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2083.512.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Galant Fortis CY4A (2007-2018)","public_title":null,"options":["Default Title"],"price":21600,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-galant-fortis-cy4a-2007-2018-rzcrew.jpg?v=1710330983"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-galant-fortis-cy4a-2007-2018-rzcrew.jpg?v=1710330983","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Galant Fortis CY4A (2007-2018) - 2083.512.1 - Rzcrewgarage","id":25433088950454,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-galant-fortis-cy4a-2007-2018-rzcrew.jpg?v=1710330983"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-galant-fortis-cy4a-2007-2018-rzcrew.jpg?v=1710330983","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position:10mm lower than OEM seat.(A case of Style-JJ)seat belt buckle and center console will rub when sliding..\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.Evolution10.Attached a side airbag canceller. Accessories and the navigation unit are unconfirmed.\u003cbr\u003e- CS,CT,C-classic CSE = the sitting position will be higher because of spacers usage.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE \u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Galant Fortis - CY4A (2007-2009) 4B11\u003cbr\u003eMitsubishi - Galant Fortis - CY4A (2009-2018) 4B11\u003c!--split--\u003e"}

{"id":6252862374070,"title":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Galant Fortis SportBack CX4A (2008-2015)","handle":"recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-galant-fortis-sportback-cx4a-2008-2015-2083-512-1","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position:10mm lower than OEM seat.(A case of Style-JJ)seat belt buckle and center console will rub when sliding..\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.Evolution10.Attached a side airbag canceller. Accessories and the navigation unit are unconfirmed.\u003cbr\u003e- CS,CT,C-classic CSE = the sitting position will be higher because of spacers usage.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE \u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Galant Fortis SportBack - CX4A (2008-2009) 4B11\u003cbr\u003eMitsubishi - Galant Fortis SportBack - CX4A (2009-2015) 4B11\u003c!--split--\u003e","published_at":"2021-02-08T18:12:02+08:00","created_at":"2021-02-08T18:12:03+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2008","2009","2010","2011","2012","2013","2014","2015","galant-fortis-sportback-cx4a2wd-2009-2015-na-4b11-i4","galant-fortis-sportback-cx4a4wd-2008-2015-na-4b11-i4","left","mitsubishi","recaro-japan","seat-rails","ws10"],"price":21600,"price_min":21600,"price_max":21600,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38014278828214,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2083.512.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Galant Fortis SportBack CX4A (2008-2015)","public_title":null,"options":["Default Title"],"price":21600,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-galant-fortis-sportback-cx4a-2008-2015-rzcrew.jpg?v=1710330983"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-galant-fortis-sportback-cx4a-2008-2015-rzcrew.jpg?v=1710330983","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Galant Fortis SportBack CX4A (2008-2015) - 2083.512.1 - Rzcrewgarage","id":25433089441974,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-galant-fortis-sportback-cx4a-2008-2015-rzcrew.jpg?v=1710330983"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-galant-fortis-sportback-cx4a-2008-2015-rzcrew.jpg?v=1710330983","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position:10mm lower than OEM seat.(A case of Style-JJ)seat belt buckle and center console will rub when sliding..\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.Evolution10.Attached a side airbag canceller. Accessories and the navigation unit are unconfirmed.\u003cbr\u003e- CS,CT,C-classic CSE = the sitting position will be higher because of spacers usage.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE \u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Galant Fortis SportBack - CX4A (2008-2009) 4B11\u003cbr\u003eMitsubishi - Galant Fortis SportBack - CX4A (2009-2015) 4B11\u003c!--split--\u003e"}

{"id":6252858998966,"title":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Lancer CB1A\/CB2A\/CB3A\/CB4A\/CB6A\/CB7A\/CB8A\/CD3A\/CD5A\/CD7A\/CD8A\/CK1A\/CK2A\/CK4A\/CK6A\/CK8A\/CM2A\/CM8A (1991-2000)","handle":"recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-cb1a-cb2a-cb3a-cb4a-cb6a-cb7a-cb8a-cd3a-cd5a-cd7a-cd8a-ck1a-ck2a-ck4a-ck6a-ck8a-cm2a-cm8a-1991-2000-2083-017-1","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(A case of Style-JJ)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.\u003cbr\u003e- CS,CT,C-classic = the sitting position will be higher because of spacers usage. CSE uses spacer therefore seat position will be higher.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE \u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer - CB1A (1991-1994) 4G13\u003cbr\u003eMitsubishi - Lancer - CB2A (1991-1994) 4G15\u003cbr\u003eMitsubishi - Lancer - CB3A (1991-1995) 4G91\u003cbr\u003eMitsubishi - Lancer - CB4A (1992-1994) 4G92\u003cbr\u003eMitsubishi - Lancer - CB6A (1992-1995) 6A10\u003cbr\u003eMitsubishi - Lancer - CB7A (1991-1992) 4D56\u003cbr\u003eMitsubishi - Lancer - CB8A (1992-1994) 4D68\u003cbr\u003eMitsubishi - Lancer - CD3A (1991-1994) 4G91\u003cbr\u003eMitsubishi - Lancer - CD5A (1991-1994) 4G93\u003cbr\u003eMitsubishi - Lancer - CD7A (1991-1992) 4D56\u003cbr\u003eMitsubishi - Lancer - CD8A (1992-1994) 4D68\u003cbr\u003eMitsubishi - Lancer - CK1A (1997-2000) 4G13\u003cbr\u003eMitsubishi - Lancer - CK1A (1995-1997) 4G13\u003cbr\u003eMitsubishi - Lancer - CK2A (1997-2000) 4G15\u003cbr\u003eMitsubishi - Lancer - CK2A (1995-1997) 4G15\u003cbr\u003eMitsubishi - Lancer - CK4A (1997-2000) 4G92\u003cbr\u003eMitsubishi - Lancer - CK4A (1995-1997) 4G92\u003cbr\u003eMitsubishi - Lancer - CK6A (1997-1999) 6A11\u003cbr\u003eMitsubishi - Lancer - CK6A (1995-1997) 6A11\u003cbr\u003eMitsubishi - Lancer - CK8A (1997-1999) 4D68\u003cbr\u003eMitsubishi - Lancer - CK8A (1995-1997) 4D68\u003cbr\u003eMitsubishi - Lancer - CM2A (1997-2000) 4G15\u003cbr\u003eMitsubishi - Lancer - CM2A (1995-1997) 4G15\u003cbr\u003eMitsubishi - Lancer - CM8A (1997-1999) 4D68\u003cbr\u003eMitsubishi - Lancer - CM8A (1995-1997) 4D68\u003c!--split--\u003e","published_at":"2021-02-08T18:10:55+08:00","created_at":"2021-02-08T18:10:56+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","lancer-cb1a-1991-1994-na-4g13-i4","lancer-cb2a-1991-1994-na-4g15-i4","lancer-cb3a-1991-1995-na-4g91-i4","lancer-cb4a-1992-1994-na-4g92-i4","lancer-cb6a-1992-1995-na-6a10-i4","lancer-cb7a-1991-1992-na-4d56-i4","lancer-cb8a-1992-1994-na-4d68-i4","lancer-cd3a-1991-1994-na-4g91-i4","lancer-cd5a-1991-1994-tc-4g93-i4","lancer-cd7a-1991-1992-na-4d56-i4","lancer-cd8a-1992-1994-na-4d68-i4","lancer-ck1a-1995-2000-na-4g13-i4","lancer-ck2a-1995-2000-na-4g15-i4","lancer-ck4a-1995-2000-na-4g92-i4","lancer-ck6a-1995-2000-na-6a11-i4","lancer-ck8a-1995-2000-na-4d68-i4","lancer-cm2a-1995-2000-na-4g15-i4","lancer-cm8a-1995-2000-na-4d68-i4","left","mitsubishi","recaro-japan","seat-rails","ws10"],"price":21600,"price_min":21600,"price_max":21600,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38014272995510,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2083.017.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Lancer CB1A\/CB2A\/CB3A\/CB4A\/CB6A\/CB7A\/CB8A\/CD3A\/CD5A\/CD7A\/CD8A\/CK1A\/CK2A\/CK4A\/CK6A\/CK8A\/CM2A\/CM8A (1991-2000)","public_title":null,"options":["Default Title"],"price":21600,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-cb1acb2acb3acb4acb6acb7acb8acd3acd5acd7acd8ack1ack2ack4ack6ack8acm2acm8a-1991-2000-rzcrew.jpg?v=1710331010"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-cb1acb2acb3acb4acb6acb7acb8acd3acd5acd7acd8ack1ack2ack4ack6ack8acm2acm8a-1991-2000-rzcrew.jpg?v=1710331010","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Lancer CB1A\/CB2A\/CB3A\/CB4A\/CB6A\/CB7A\/CB8A\/CD3A\/CD5A\/CD7A\/CD8A\/CK1A\/CK2A\/CK4A\/CK6A\/CK8A\/CM2A\/CM8A (1991-2000) - 2083.017.1 - Rzcrewgarage","id":25433071222966,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-cb1acb2acb3acb4acb6acb7acb8acd3acd5acd7acd8ack1ack2ack4ack6ack8acm2acm8a-1991-2000-rzcrew.jpg?v=1710331010"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-cb1acb2acb3acb4acb6acb7acb8acd3acd5acd7acd8ack1ack2ack4ack6ack8acm2acm8a-1991-2000-rzcrew.jpg?v=1710331010","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(A case of Style-JJ)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.\u003cbr\u003e- CS,CT,C-classic = the sitting position will be higher because of spacers usage. CSE uses spacer therefore seat position will be higher.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE \u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer - CB1A (1991-1994) 4G13\u003cbr\u003eMitsubishi - Lancer - CB2A (1991-1994) 4G15\u003cbr\u003eMitsubishi - Lancer - CB3A (1991-1995) 4G91\u003cbr\u003eMitsubishi - Lancer - CB4A (1992-1994) 4G92\u003cbr\u003eMitsubishi - Lancer - CB6A (1992-1995) 6A10\u003cbr\u003eMitsubishi - Lancer - CB7A (1991-1992) 4D56\u003cbr\u003eMitsubishi - Lancer - CB8A (1992-1994) 4D68\u003cbr\u003eMitsubishi - Lancer - CD3A (1991-1994) 4G91\u003cbr\u003eMitsubishi - Lancer - CD5A (1991-1994) 4G93\u003cbr\u003eMitsubishi - Lancer - CD7A (1991-1992) 4D56\u003cbr\u003eMitsubishi - Lancer - CD8A (1992-1994) 4D68\u003cbr\u003eMitsubishi - Lancer - CK1A (1997-2000) 4G13\u003cbr\u003eMitsubishi - Lancer - CK1A (1995-1997) 4G13\u003cbr\u003eMitsubishi - Lancer - CK2A (1997-2000) 4G15\u003cbr\u003eMitsubishi - Lancer - CK2A (1995-1997) 4G15\u003cbr\u003eMitsubishi - Lancer - CK4A (1997-2000) 4G92\u003cbr\u003eMitsubishi - Lancer - CK4A (1995-1997) 4G92\u003cbr\u003eMitsubishi - Lancer - CK6A (1997-1999) 6A11\u003cbr\u003eMitsubishi - Lancer - CK6A (1995-1997) 6A11\u003cbr\u003eMitsubishi - Lancer - CK8A (1997-1999) 4D68\u003cbr\u003eMitsubishi - Lancer - CK8A (1995-1997) 4D68\u003cbr\u003eMitsubishi - Lancer - CM2A (1997-2000) 4G15\u003cbr\u003eMitsubishi - Lancer - CM2A (1995-1997) 4G15\u003cbr\u003eMitsubishi - Lancer - CM8A (1997-1999) 4D68\u003cbr\u003eMitsubishi - Lancer - CM8A (1995-1997) 4D68\u003c!--split--\u003e"}

{"id":6252859064502,"title":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Lancer Evolution I CD9A (1992-1993)","handle":"recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-i-cd9a-1992-1993-2083-017-1","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(A case of Style-JJ)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.\u003cbr\u003e- CS,CT,C-classic = the sitting position will be higher because of spacers usage. CSE uses spacer therefore seat position will be higher.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE \u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution I - CD9A (1992-1993) 4G63\u003c!--split--\u003e","published_at":"2021-02-08T18:10:57+08:00","created_at":"2021-02-08T18:10:58+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["1992","1993","lancer-evolution-i-cd9a-1992-1993-tc-4g63t-1st-gen-i4","left","mitsubishi","recaro-japan","seat-rails","ws10"],"price":21600,"price_min":21600,"price_max":21600,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38014273159350,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2083.017.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Lancer Evolution I CD9A (1992-1993)","public_title":null,"options":["Default Title"],"price":21600,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-i-cd9a-1992-1993-rzcrew.jpg?v=1710331010"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-i-cd9a-1992-1993-rzcrew.jpg?v=1710331010","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Lancer Evolution I CD9A (1992-1993) - 2083.017.1 - Rzcrewgarage","id":25433071419574,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-i-cd9a-1992-1993-rzcrew.jpg?v=1710331010"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-i-cd9a-1992-1993-rzcrew.jpg?v=1710331010","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(A case of Style-JJ)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.\u003cbr\u003e- CS,CT,C-classic = the sitting position will be higher because of spacers usage. CSE uses spacer therefore seat position will be higher.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE \u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution I - CD9A (1992-1993) 4G63\u003c!--split--\u003e"}

{"id":6252859130038,"title":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Lancer Evolution II CE9A (1994-1994)","handle":"recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-ii-ce9a-1994-1994-2083-017-1","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(A case of Style-JJ)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.\u003cbr\u003e- CS,CT,C-classic = the sitting position will be higher because of spacers usage. CSE uses spacer therefore seat position will be higher.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE \u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution II - CE9A (1994-1994) 4G63\u003c!--split--\u003e","published_at":"2021-02-08T18:10:58+08:00","created_at":"2021-02-08T18:10:59+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["1994","lancer-evolution-ii-ce9a-1994-1995-tc-4g63t-1st-gen-i4","left","mitsubishi","recaro-japan","seat-rails","ws10"],"price":21600,"price_min":21600,"price_max":21600,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38014273323190,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2083.017.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Lancer Evolution II CE9A (1994-1994)","public_title":null,"options":["Default Title"],"price":21600,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-ii-ce9a-1994-1994-rzcrew.jpg?v=1710331010"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-ii-ce9a-1994-1994-rzcrew.jpg?v=1710331010","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Lancer Evolution II CE9A (1994-1994) - 2083.017.1 - Rzcrewgarage","id":25433071780022,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-ii-ce9a-1994-1994-rzcrew.jpg?v=1710331010"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-ii-ce9a-1994-1994-rzcrew.jpg?v=1710331010","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(A case of Style-JJ)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.\u003cbr\u003e- CS,CT,C-classic = the sitting position will be higher because of spacers usage. CSE uses spacer therefore seat position will be higher.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE \u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution II - CE9A (1994-1994) 4G63\u003c!--split--\u003e"}

{"id":6252859162806,"title":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Lancer Evolution III CE9A (1995-1996)","handle":"recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-iii-ce9a-1995-1996-2083-017-1","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(A case of Style-JJ)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.\u003cbr\u003e- CS,CT,C-classic = the sitting position will be higher because of spacers usage. CSE uses spacer therefore seat position will be higher.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE \u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution III - CE9A (1995-1996) 4G63\u003c!--split--\u003e","published_at":"2021-02-08T18:10:59+08:00","created_at":"2021-02-08T18:11:00+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["1995","1996","lancer-evolution-iii-ce9a-1995-1996-tc-4g63t-1st-gen-i4","left","mitsubishi","recaro-japan","seat-rails","ws10"],"price":21600,"price_min":21600,"price_max":21600,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38014273355958,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2083.017.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Lancer Evolution III CE9A (1995-1996)","public_title":null,"options":["Default Title"],"price":21600,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-iii-ce9a-1995-1996-rzcrew.jpg?v=1710331008"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-iii-ce9a-1995-1996-rzcrew.jpg?v=1710331008","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Lancer Evolution III CE9A (1995-1996) - 2083.017.1 - Rzcrewgarage","id":25433071943862,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-iii-ce9a-1995-1996-rzcrew.jpg?v=1710331008"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-iii-ce9a-1995-1996-rzcrew.jpg?v=1710331008","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(A case of Style-JJ)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.\u003cbr\u003e- CS,CT,C-classic = the sitting position will be higher because of spacers usage. CSE uses spacer therefore seat position will be higher.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE \u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution III - CE9A (1995-1996) 4G63\u003c!--split--\u003e"}

{"id":6252859195574,"title":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Lancer Evolution IV CN9A (1996-1997)","handle":"recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-iv-cn9a-1996-1997-2083-017-1","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(A case of Style-JJ)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.\u003cbr\u003e- CS,CT,C-classic = the sitting position will be higher because of spacers usage. CSE uses spacer therefore seat position will be higher.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE \u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution IV - CN9A (1996-1997) 4G63\u003c!--split--\u003e","published_at":"2021-02-08T18:11:01+08:00","created_at":"2021-02-08T18:11:01+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["1996","1997","lancer-evolution-iv-cn9a-1996-1997-tc-4g63t-2nd-gen-i4","left","mitsubishi","recaro-japan","seat-rails","ws10"],"price":21600,"price_min":21600,"price_max":21600,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38014273388726,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2083.017.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Lancer Evolution IV CN9A (1996-1997)","public_title":null,"options":["Default Title"],"price":21600,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-iv-cn9a-1996-1997-rzcrew.jpg?v=1710331008"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-iv-cn9a-1996-1997-rzcrew.jpg?v=1710331008","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Lancer Evolution IV CN9A (1996-1997) - 2083.017.1 - Rzcrewgarage","id":25433072074934,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-iv-cn9a-1996-1997-rzcrew.jpg?v=1710331008"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-iv-cn9a-1996-1997-rzcrew.jpg?v=1710331008","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(A case of Style-JJ)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.\u003cbr\u003e- CS,CT,C-classic = the sitting position will be higher because of spacers usage. CSE uses spacer therefore seat position will be higher.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE \u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution IV - CN9A (1996-1997) 4G63\u003c!--split--\u003e"}

{"id":6252861849782,"title":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Lancer Evolution IX CT9A (2005-2007)","handle":"recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-ix-ct9a-2005-2007-2083-511-1","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. Evolution 7\/8\/9.\u003cbr\u003e- CSE C-classic=need to remove recliner cover on the console side. the sitting position will be higher because of spacers usage.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- CSE : Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- C-Classic: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution IX - CT9A (2005-2007) 4G63\u003c!--split--\u003e","published_at":"2021-02-08T18:11:52+08:00","created_at":"2021-02-08T18:11:52+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2005","2006","2007","lancer-evolution-ix-ct9a-2005-2007-tc-4g63t-mivec-i4","left","mitsubishi","recaro-japan","seat-rails","ws10"],"price":21600,"price_min":21600,"price_max":21600,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38014278074550,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2083.511.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Lancer Evolution IX CT9A (2005-2007)","public_title":null,"options":["Default Title"],"price":21600,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-ix-ct9a-2005-2007-rzcrew.jpg?v=1710330990"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-ix-ct9a-2005-2007-rzcrew.jpg?v=1710330990","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Lancer Evolution IX CT9A (2005-2007) - 2083.511.1 - Rzcrewgarage","id":25433085051062,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-ix-ct9a-2005-2007-rzcrew.jpg?v=1710330990"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-ix-ct9a-2005-2007-rzcrew.jpg?v=1710330990","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. Evolution 7\/8\/9.\u003cbr\u003e- CSE C-classic=need to remove recliner cover on the console side. the sitting position will be higher because of spacers usage.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- CSE : Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- C-Classic: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution IX - CT9A (2005-2007) 4G63\u003c!--split--\u003e"}

{"id":6252859261110,"title":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Lancer Evolution V CP9A (1998-1998)","handle":"recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-v-cp9a-1998-1998-2083-017-1","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(A case of Style-JJ)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.\u003cbr\u003e- CS,CT,C-classic = the sitting position will be higher because of spacers usage. CSE uses spacer therefore seat position will be higher.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE \u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution V - CP9A (1998-1998) 4G63\u003c!--split--\u003e","published_at":"2021-02-08T18:11:02+08:00","created_at":"2021-02-08T18:11:03+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["1998","lancer-evolution-v-cp9a-1998-1999-tc-4g63t-2nd-gen-i4","left","mitsubishi","recaro-japan","seat-rails","ws10"],"price":21600,"price_min":21600,"price_max":21600,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38014273650870,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2083.017.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Lancer Evolution V CP9A (1998-1998)","public_title":null,"options":["Default Title"],"price":21600,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-v-cp9a-1998-1998-rzcrew.jpg?v=1710331009"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-v-cp9a-1998-1998-rzcrew.jpg?v=1710331009","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Lancer Evolution V CP9A (1998-1998) - 2083.017.1 - Rzcrewgarage","id":25433072238774,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-v-cp9a-1998-1998-rzcrew.jpg?v=1710331009"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-v-cp9a-1998-1998-rzcrew.jpg?v=1710331009","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(A case of Style-JJ)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.\u003cbr\u003e- CS,CT,C-classic = the sitting position will be higher because of spacers usage. CSE uses spacer therefore seat position will be higher.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE \u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution V - CP9A (1998-1998) 4G63\u003c!--split--\u003e"}

{"id":6252859326646,"title":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Lancer Evolution VI CP9A (1999-1999)","handle":"recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-vi-cp9a-1999-1999-2083-017-1","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(A case of Style-JJ)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.\u003cbr\u003e- CS,CT,C-classic = the sitting position will be higher because of spacers usage. CSE uses spacer therefore seat position will be higher.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE \u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution VI - CP9A (1999-1999) 4G63\u003c!--split--\u003e","published_at":"2021-02-08T18:11:03+08:00","created_at":"2021-02-08T18:11:04+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["1999","lancer-evolution-vi-cp9a-1999-2001-tc-4g63t-2nd-gen-i4","left","mitsubishi","recaro-japan","seat-rails","ws10"],"price":21600,"price_min":21600,"price_max":21600,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38014273683638,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2083.017.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Lancer Evolution VI CP9A (1999-1999)","public_title":null,"options":["Default Title"],"price":21600,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-vi-cp9a-1999-1999-rzcrew.jpg?v=1710331008"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-vi-cp9a-1999-1999-rzcrew.jpg?v=1710331008","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Lancer Evolution VI CP9A (1999-1999) - 2083.017.1 - Rzcrewgarage","id":25433072631990,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-vi-cp9a-1999-1999-rzcrew.jpg?v=1710331008"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-vi-cp9a-1999-1999-rzcrew.jpg?v=1710331008","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(A case of Style-JJ)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.\u003cbr\u003e- CS,CT,C-classic = the sitting position will be higher because of spacers usage. CSE uses spacer therefore seat position will be higher.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE \u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution VI - CP9A (1999-1999) 4G63\u003c!--split--\u003e"}

{"id":6252861915318,"title":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Lancer Evolution VII CT9A (2001-2002)","handle":"recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-vii-ct9a-2001-2002-2083-511-1","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. Evolution 7\/8\/9.\u003cbr\u003e- CSE C-classic=need to remove recliner cover on the console side. the sitting position will be higher because of spacers usage.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- CSE : Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- C-Classic: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution VII - CT9A (2001-2002) 4G63\u003c!--split--\u003e","published_at":"2021-02-08T18:11:53+08:00","created_at":"2021-02-08T18:11:53+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2001","2002","lancer-evolution-vii-ct9a-2001-2002-tc-4g63t-3rd-gen-i4","left","mitsubishi","recaro-japan","seat-rails","ws10"],"price":21600,"price_min":21600,"price_max":21600,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38014278107318,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2083.511.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Lancer Evolution VII CT9A (2001-2002)","public_title":null,"options":["Default Title"],"price":21600,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-vii-ct9a-2001-2002-rzcrew.jpg?v=1710330990"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-vii-ct9a-2001-2002-rzcrew.jpg?v=1710330990","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Lancer Evolution VII CT9A (2001-2002) - 2083.511.1 - Rzcrewgarage","id":25433085247670,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-vii-ct9a-2001-2002-rzcrew.jpg?v=1710330990"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-vii-ct9a-2001-2002-rzcrew.jpg?v=1710330990","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. Evolution 7\/8\/9.\u003cbr\u003e- CSE C-classic=need to remove recliner cover on the console side. the sitting position will be higher because of spacers usage.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- CSE : Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- C-Classic: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution VII - CT9A (2001-2002) 4G63\u003c!--split--\u003e"}

{"id":6252861948086,"title":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Lancer Evolution VIII CT9A (2003-2005)","handle":"recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-viii-ct9a-2003-2005-2083-511-1","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. Evolution 7\/8\/9.\u003cbr\u003e- CSE C-classic=need to remove recliner cover on the console side. the sitting position will be higher because of spacers usage.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- CSE : Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- C-Classic: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution VIII - CT9A (2003-2005) 4G63\u003c!--split--\u003e","published_at":"2021-02-08T18:11:54+08:00","created_at":"2021-02-08T18:11:55+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2003","2004","2005","lancer-evolution-viii-ct9a-2003-2005-tc-4g63t-mivec-i4","left","mitsubishi","recaro-japan","seat-rails","ws10"],"price":21600,"price_min":21600,"price_max":21600,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38014278140086,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2083.511.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Lancer Evolution VIII CT9A (2003-2005)","public_title":null,"options":["Default Title"],"price":21600,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-viii-ct9a-2003-2005-rzcrew.jpg?v=1710330990"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-viii-ct9a-2003-2005-rzcrew.jpg?v=1710330990","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Lancer Evolution VIII CT9A (2003-2005) - 2083.511.1 - Rzcrewgarage","id":25433085345974,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-viii-ct9a-2003-2005-rzcrew.jpg?v=1710330990"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-viii-ct9a-2003-2005-rzcrew.jpg?v=1710330990","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. Evolution 7\/8\/9.\u003cbr\u003e- CSE C-classic=need to remove recliner cover on the console side. the sitting position will be higher because of spacers usage.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- CSE : Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- C-Classic: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution VIII - CT9A (2003-2005) 4G63\u003c!--split--\u003e"}

{"id":6252862439606,"title":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Lancer Evolution X CZ4A (2007-2017)","handle":"recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-x-cz4a-2007-2017-2083-512-1","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position:10mm lower than OEM seat.(A case of Style-JJ)seat belt buckle and center console will rub when sliding..\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.Evolution10.Attached a side airbag canceller. Accessories and the navigation unit are unconfirmed.\u003cbr\u003e- CS,CT,C-classic CSE = the sitting position will be higher because of spacers usage.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE \u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution X - CZ4A (2007-2008) 4B11\u003cbr\u003eMitsubishi - Lancer Evolution X - CZ4A (2008-2009) 4B11\u003cbr\u003eMitsubishi - Lancer Evolution X - CZ4A (2009-2017) 4B11\u003c!--split--\u003e","published_at":"2021-02-08T18:12:03+08:00","created_at":"2021-02-08T18:12:04+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","lancer-evolution-x-cz4a-chuki-rs-jdmgsr-2008-2009-tc-4b11-i4","lancer-evolution-x-cz4a-kouki-rs-jdmgsr-2009-2017-tc-4b11-i4","lancer-evolution-x-cz4a-zenki-rs-jdmgsr-2007-2008-tc-4b11-i4","left","mitsubishi","recaro-japan","seat-rails","ws10"],"price":21600,"price_min":21600,"price_max":21600,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38014278860982,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2083.512.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Lancer Evolution X CZ4A (2007-2017)","public_title":null,"options":["Default Title"],"price":21600,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-x-cz4a-2007-2017-rzcrew.jpg?v=1710330983"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-x-cz4a-2007-2017-rzcrew.jpg?v=1710330983","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Lancer Evolution X CZ4A (2007-2017) - 2083.512.1 - Rzcrewgarage","id":25433089605814,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-x-cz4a-2007-2017-rzcrew.jpg?v=1710330983"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-evolution-x-cz4a-2007-2017-rzcrew.jpg?v=1710330983","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position:10mm lower than OEM seat.(A case of Style-JJ)seat belt buckle and center console will rub when sliding..\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.Evolution10.Attached a side airbag canceller. Accessories and the navigation unit are unconfirmed.\u003cbr\u003e- CS,CT,C-classic CSE = the sitting position will be higher because of spacers usage.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE \u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer Evolution X - CZ4A (2007-2008) 4B11\u003cbr\u003eMitsubishi - Lancer Evolution X - CZ4A (2008-2009) 4B11\u003cbr\u003eMitsubishi - Lancer Evolution X - CZ4A (2009-2017) 4B11\u003c!--split--\u003e"}

{"id":6252859359414,"title":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Lancer GSR CM5A (1995-2000)","handle":"recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-gsr-cm5a-1995-2000-2083-017-1","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(A case of Style-JJ)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.\u003cbr\u003e- CS,CT,C-classic = the sitting position will be higher because of spacers usage. CSE uses spacer therefore seat position will be higher.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE \u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer GSR - CM5A (1997-2000) 4G93\u003cbr\u003eMitsubishi - Lancer GSR - CM5A (1995-1997) 4G93\u003c!--split--\u003e","published_at":"2021-02-08T18:11:05+08:00","created_at":"2021-02-08T18:11:05+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["1995","1996","1997","1998","1999","2000","lancer-gsr-cm5a-kouki-1997-2000-na-4g93-i4","lancer-gsr-cm5a-zenki-1995-1997-na-4g93-i4","left","mitsubishi","recaro-japan","seat-rails","ws10"],"price":21600,"price_min":21600,"price_max":21600,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38014273716406,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2083.017.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Lancer GSR CM5A (1995-2000)","public_title":null,"options":["Default Title"],"price":21600,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-gsr-cm5a-1995-2000-rzcrew.jpg?v=1710331008"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-gsr-cm5a-1995-2000-rzcrew.jpg?v=1710331008","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Lancer GSR CM5A (1995-2000) - 2083.017.1 - Rzcrewgarage","id":25433073549494,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-gsr-cm5a-1995-2000-rzcrew.jpg?v=1710331008"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-lancer-gsr-cm5a-1995-2000-rzcrew.jpg?v=1710331008","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(A case of Style-JJ)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.\u003cbr\u003e- CS,CT,C-classic = the sitting position will be higher because of spacers usage. CSE uses spacer therefore seat position will be higher.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE \u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Lancer GSR - CM5A (1997-2000) 4G93\u003cbr\u003eMitsubishi - Lancer GSR - CM5A (1995-1997) 4G93\u003c!--split--\u003e"}

{"id":6252859424950,"title":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Libero CB2W\/CB4W\/CB5W\/CB8W\/CD5W\/CD8W (1992-2002)","handle":"recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-libero-cb2w-cb4w-cb5w-cb8w-cd5w-cd8w-1992-2002-2083-017-1","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(A case of Style-JJ)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.\u003cbr\u003e- CS,CT,C-classic = the sitting position will be higher because of spacers usage. CSE uses spacer therefore seat position will be higher.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE \u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Libero - CB2W (1992-1995) 4G15\u003cbr\u003eMitsubishi - Libero - CB2W (1996-2002) 4G15\u003cbr\u003eMitsubishi - Libero - CB4W (1992-1996) 4G92\u003cbr\u003eMitsubishi - Libero - CB4W (1996-2000) 4G92\u003cbr\u003eMitsubishi - Libero - CB5W (1992-1995) 4G93\u003cbr\u003eMitsubishi - Libero - CB5W (1995-2000) 4G93\u003cbr\u003eMitsubishi - Libero - CB8W (1992-1995) 4D68\u003cbr\u003eMitsubishi - Libero - CB8W (1995-2002) 4D68\u003cbr\u003eMitsubishi - Libero - CD5W (1992-1995) 4G93\u003cbr\u003eMitsubishi - Libero - CD5W (1995-2000) 4G93\u003cbr\u003eMitsubishi - Libero - CD8W (1992-1995) 4D68\u003cbr\u003eMitsubishi - Libero - CD8W (1995-1999) 4D68\u003c!--split--\u003e","published_at":"2021-02-08T18:11:06+08:00","created_at":"2021-02-08T18:11:07+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","left","libero-cb2w-1992-2002-na-4g15-sohc-i4","libero-cb4w-1992-2000-na-4g92-sohc-i4","libero-cb5w-1992-2000-na-4g93-i4","libero-cb8w-1992-2002-na-4d68-i4","libero-cd5w-1992-2000-na-4g93-i4","libero-cd8w-1992-2002-na-4d68-i4","mitsubishi","recaro-japan","seat-rails","ws10"],"price":21600,"price_min":21600,"price_max":21600,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38014273978550,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2083.017.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Libero CB2W\/CB4W\/CB5W\/CB8W\/CD5W\/CD8W (1992-2002)","public_title":null,"options":["Default Title"],"price":21600,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-libero-cb2wcb4wcb5wcb8wcd5wcd8w-1992-2002-rzcrew.jpg?v=1710331007"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-libero-cb2wcb4wcb5wcb8wcd5wcd8w-1992-2002-rzcrew.jpg?v=1710331007","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Libero CB2W\/CB4W\/CB5W\/CB8W\/CD5W\/CD8W (1992-2002) - 2083.017.1 - Rzcrewgarage","id":25433074106550,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-libero-cb2wcb4wcb5wcb8wcd5wcd8w-1992-2002-rzcrew.jpg?v=1710331007"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-libero-cb2wcb4wcb5wcb8wcd5wcd8w-1992-2002-rzcrew.jpg?v=1710331007","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(A case of Style-JJ)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.\u003cbr\u003e- CS,CT,C-classic = the sitting position will be higher because of spacers usage. CSE uses spacer therefore seat position will be higher.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE \u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Libero - CB2W (1992-1995) 4G15\u003cbr\u003eMitsubishi - Libero - CB2W (1996-2002) 4G15\u003cbr\u003eMitsubishi - Libero - CB4W (1992-1996) 4G92\u003cbr\u003eMitsubishi - Libero - CB4W (1996-2000) 4G92\u003cbr\u003eMitsubishi - Libero - CB5W (1992-1995) 4G93\u003cbr\u003eMitsubishi - Libero - CB5W (1995-2000) 4G93\u003cbr\u003eMitsubishi - Libero - CB8W (1992-1995) 4D68\u003cbr\u003eMitsubishi - Libero - CB8W (1995-2002) 4D68\u003cbr\u003eMitsubishi - Libero - CD5W (1992-1995) 4G93\u003cbr\u003eMitsubishi - Libero - CD5W (1995-2000) 4G93\u003cbr\u003eMitsubishi - Libero - CD8W (1992-1995) 4D68\u003cbr\u003eMitsubishi - Libero - CD8W (1995-1999) 4D68\u003c!--split--\u003e"}

{"id":6252859490486,"title":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Mirage CA1A\/CA2A\/CA3A\/CA4A (1991-1995)","handle":"recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-mirage-ca1a-ca2a-ca3a-ca4a-1991-1995-2083-017-1","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(A case of Style-JJ)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.\u003cbr\u003e- CS,CT,C-classic = the sitting position will be higher because of spacers usage. CSE uses spacer therefore seat position will be higher.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE \u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Mirage - CA1A (1994-1994) 4G13\u003cbr\u003eMitsubishi - Mirage - CA1A (1991-1992) 4G13\u003cbr\u003eMitsubishi - Mirage - CA1A (1992-1993) 4G13\u003cbr\u003eMitsubishi - Mirage - CA1A (1994-1995) 4G13\u003cbr\u003eMitsubishi - Mirage - CA2A (1994-1994) 4G15\u003cbr\u003eMitsubishi - Mirage - CA2A (1991-1992) 4G15\u003cbr\u003eMitsubishi - Mirage - CA2A (1992-1993) 4G15\u003cbr\u003eMitsubishi - Mirage - CA2A (1994-1995) 4G15\u003cbr\u003eMitsubishi - Mirage - CA3A (1994-1994) 4G91\u003cbr\u003eMitsubishi - Mirage - CA3A (1991-1992) 4G91\u003cbr\u003eMitsubishi - Mirage - CA3A (1992-1993) 4G91\u003cbr\u003eMitsubishi - Mirage - CA3A (1994-1995) 4G91\u003cbr\u003eMitsubishi - Mirage - CA4A (1994-1994) 4G92\u003cbr\u003eMitsubishi - Mirage - CA4A (1991-1992) 4G92\u003cbr\u003eMitsubishi - Mirage - CA4A (1992-1993) 4G92\u003cbr\u003eMitsubishi - Mirage - CA4A (1994-1995) 4G92\u003c!--split--\u003e","published_at":"2021-02-08T18:11:08+08:00","created_at":"2021-02-08T18:11:08+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["1991","1992","1993","1994","1995","left","mirage-ca1a-1991-1992-na-4g13-i4","mirage-ca1a-1992-1993-na-4g13-i4","mirage-ca1a-1994-1995-na-4g13-i4","mirage-ca2a-1991-1992-na-4g15-sohc-i4","mirage-ca2a-1992-1993-na-4g15-sohc-i4","mirage-ca2a-1994-1995-na-4g15-sohc-i4","mirage-ca3a-1991-1992-na-4g91-i4","mirage-ca3a-1992-1993-na-4g91-i4","mirage-ca3a-1994-1995-na-4g91-i4","mirage-ca4a-1991-1992-na-4g92-sohc-i4","mirage-ca4a-1992-1993-na-4g92-sohc-i4","mirage-ca4a-1994-1995-na-4g92-sohc-i4","mitsubishi","recaro-japan","seat-rails","ws10"],"price":21600,"price_min":21600,"price_max":21600,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38014274371766,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2083.017.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Mirage CA1A\/CA2A\/CA3A\/CA4A (1991-1995)","public_title":null,"options":["Default Title"],"price":21600,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-mirage-ca1aca2aca3aca4a-1991-1995-rzcrew.jpg?v=1710331006"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-mirage-ca1aca2aca3aca4a-1991-1995-rzcrew.jpg?v=1710331006","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Mirage CA1A\/CA2A\/CA3A\/CA4A (1991-1995) - 2083.017.1 - Rzcrewgarage","id":25433074696374,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-mirage-ca1aca2aca3aca4a-1991-1995-rzcrew.jpg?v=1710331006"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-mirage-ca1aca2aca3aca4a-1991-1995-rzcrew.jpg?v=1710331006","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(A case of Style-JJ)\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.\u003cbr\u003e- CS,CT,C-classic = the sitting position will be higher because of spacers usage. CSE uses spacer therefore seat position will be higher.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE \u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Mirage - CA1A (1994-1994) 4G13\u003cbr\u003eMitsubishi - Mirage - CA1A (1991-1992) 4G13\u003cbr\u003eMitsubishi - Mirage - CA1A (1992-1993) 4G13\u003cbr\u003eMitsubishi - Mirage - CA1A (1994-1995) 4G13\u003cbr\u003eMitsubishi - Mirage - CA2A (1994-1994) 4G15\u003cbr\u003eMitsubishi - Mirage - CA2A (1991-1992) 4G15\u003cbr\u003eMitsubishi - Mirage - CA2A (1992-1993) 4G15\u003cbr\u003eMitsubishi - Mirage - CA2A (1994-1995) 4G15\u003cbr\u003eMitsubishi - Mirage - CA3A (1994-1994) 4G91\u003cbr\u003eMitsubishi - Mirage - CA3A (1991-1992) 4G91\u003cbr\u003eMitsubishi - Mirage - CA3A (1992-1993) 4G91\u003cbr\u003eMitsubishi - Mirage - CA3A (1994-1995) 4G91\u003cbr\u003eMitsubishi - Mirage - CA4A (1994-1994) 4G92\u003cbr\u003eMitsubishi - Mirage - CA4A (1991-1992) 4G92\u003cbr\u003eMitsubishi - Mirage - CA4A (1992-1993) 4G92\u003cbr\u003eMitsubishi - Mirage - CA4A (1994-1995) 4G92\u003c!--split--\u003e"}

{"id":6252861325494,"title":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Outlander CW5W (2005-2012)","handle":"recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-outlander-cw5w-2005-2012-2083-272-1","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position:10mm lower than OEM seat.(Middle position of 3 position baseframe with ST-JJ)15mm to door from OEM seat.The length of slider is 20mm shorter than OEM seat on front side. The length of slider is 20mm longer than OEM seat on rear side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.For non-side airbag car only.\u003cbr\u003e- Racer,SP-# needs SP-G offset adapter (PN 1600094.CS,CSE ,CT,C-classicuses spacer therefore seat position will be higher.RS\/TS-# series need RS\/TS-G offset adapter(PN 1700001.1700001J is adjustable offset (5mm\/10mm\/15mm).RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE \u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Outlander - CW5W (2010-2012) 4B12\u003cbr\u003eMitsubishi - Outlander - CW5W (2008-2009) 4B12\u003cbr\u003eMitsubishi - Outlander - CW5W (2009-2009) 4B12\u003cbr\u003eMitsubishi - Outlander - CW5W (2005-2007) 4B12\u003cbr\u003eMitsubishi - Outlander - CW5W (2007-2008) 4B12\u003c!--split--\u003e","published_at":"2021-02-08T18:11:43+08:00","created_at":"2021-02-08T18:11:44+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2005","2006","2007","2008","2009","2010","2011","2012","left","mitsubishi","outlander-cw5w-2005-2007-na-4b12-i4","outlander-cw5w-2007-2008-na-4b12-i4","outlander-cw5w-2008-2009-na-4b12-i4","outlander-cw5w-2009-2010-na-4b12-i4","outlander-cw5w-2010-2012-na-4b12-i4","recaro-japan","seat-rails","ws10"],"price":21600,"price_min":21600,"price_max":21600,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38014277451958,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2083.272.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Outlander CW5W (2005-2012)","public_title":null,"options":["Default Title"],"price":21600,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-outlander-cw5w-2005-2012-rzcrew.jpg?v=1710330994"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-outlander-cw5w-2005-2012-rzcrew.jpg?v=1710330994","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Outlander CW5W (2005-2012) - 2083.272.1 - Rzcrewgarage","id":25433082855606,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-outlander-cw5w-2005-2012-rzcrew.jpg?v=1710330994"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-outlander-cw5w-2005-2012-rzcrew.jpg?v=1710330994","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position:10mm lower than OEM seat.(Middle position of 3 position baseframe with ST-JJ)15mm to door from OEM seat.The length of slider is 20mm shorter than OEM seat on front side. The length of slider is 20mm longer than OEM seat on rear side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.For non-side airbag car only.\u003cbr\u003e- Racer,SP-# needs SP-G offset adapter (PN 1600094.CS,CSE ,CT,C-classicuses spacer therefore seat position will be higher.RS\/TS-# series need RS\/TS-G offset adapter(PN 1700001.1700001J is adjustable offset (5mm\/10mm\/15mm).RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- CSE \u003cbr\u003e- CT\u003cbr\u003e- C-Classic\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Outlander - CW5W (2010-2012) 4B12\u003cbr\u003eMitsubishi - Outlander - CW5W (2008-2009) 4B12\u003cbr\u003eMitsubishi - Outlander - CW5W (2009-2009) 4B12\u003cbr\u003eMitsubishi - Outlander - CW5W (2005-2007) 4B12\u003cbr\u003eMitsubishi - Outlander - CW5W (2007-2008) 4B12\u003c!--split--\u003e"}

{"id":6252862963894,"title":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Pajero Jr. H57A (1995-1998)","handle":"recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-pajero-jr-h57a-1995-1998-83-103-1","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position)\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Interference:backrest side and door armrest.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. For right side seat only.(driver side)\u003cbr\u003e- Orthopad(〜Oct Year 2010 manual width adjuster type）can not be installed due to big interference. Orthopad(Nov Year 2010〜 electric width adjuster type) can be installed.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Pajero Jr. - H57A (1995-1998) 4A31\u003c!--split--\u003e","published_at":"2021-02-08T18:12:09+08:00","created_at":"2021-02-08T18:12:10+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["1995","1996","1997","1998","left","mitsubishi","pajero-jr-h57a-1995-1998-na-4a31-i4","recaro-japan","seat-rails","ws10"],"price":21600,"price_min":21600,"price_max":21600,"available":true,"price_varies":false,"compare_at_price":21600,"compare_at_price_min":21600,"compare_at_price_max":21600,"compare_at_price_varies":false,"variants":[{"id":38014279057590,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"83.103.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Pajero Jr. H57A (1995-1998)","public_title":null,"options":["Default Title"],"price":21600,"weight":17000,"compare_at_price":21600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-pajero-jr-h57a-1995-1998-rzcrew.jpg?v=1710330981"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-pajero-jr-h57a-1995-1998-rzcrew.jpg?v=1710330981","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Left - Mitsubishi Pajero Jr. H57A (1995-1998) - 83.103.1 - Rzcrewgarage","id":25433090293942,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-pajero-jr-h57a-1995-1998-rzcrew.jpg?v=1710330981"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-mitsubishi-pajero-jr-h57a-1995-1998-rzcrew.jpg?v=1710330981","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position)\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Interference:backrest side and door armrest.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. For right side seat only.(driver side)\u003cbr\u003e- Orthopad(〜Oct Year 2010 manual width adjuster type）can not be installed due to big interference. Orthopad(Nov Year 2010〜 electric width adjuster type) can be installed.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eMitsubishi - Pajero Jr. - H57A (1995-1998) 4A31\u003c!--split--\u003e"}