Toyota

{"id":7765309096118,"title":"Cusco - 14mm Rear Anti Roll Bar - Toyota 86 ZN6","handle":"cusco-14mm-rear-anti-roll-bar-toyota-86-zn6-965-311-b14","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 965 311 B14\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Rear\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?14mm. Re-Use Your Oem Bushings.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e86 | ZN6 (Spec A to E) | 2012-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e","published_at":"2024-02-05T16:33:50+08:00","created_at":"2024-02-05T15:05:37+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["2-points","2012","2013","2014","2015","2016","2017","2018","86-zn6-spec-a-to-e-2012-2018-na-4u-gse-h4","anti-roll-bars","bars-and-braces","cusco-japan","cusco-japan30","jp1","rear","steel","toyota","ws123"],"price":25560,"price_min":25560,"price_max":25560,"available":true,"price_varies":false,"compare_at_price":31400,"compare_at_price_min":31400,"compare_at_price_max":31400,"compare_at_price_varies":false,"variants":[{"id":42666274291894,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"965 311 B14","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - 14mm Rear Anti Roll Bar - Toyota 86 ZN6","public_title":null,"options":["Default Title"],"price":25560,"weight":12000,"compare_at_price":31400,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-14mm-rear-anti-roll-bar-toyota-86-zn6-rzcrew.jpg?v=1710314068"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-14mm-rear-anti-roll-bar-toyota-86-zn6-rzcrew.jpg?v=1710314068","options":["Title"],"media":[{"alt":"Cusco - 14mm Rear Anti Roll Bar - Toyota 86 ZN6 - 965 311 B14","id":27149736411318,"position":1,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-14mm-rear-anti-roll-bar-toyota-86-zn6-rzcrew.jpg?v=1710314068"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-14mm-rear-anti-roll-bar-toyota-86-zn6-rzcrew.jpg?v=1710314068","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 965 311 B14\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Rear\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?14mm. Re-Use Your Oem Bushings.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e86 | ZN6 (Spec A to E) | 2012-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e"}

{"id":7765308833974,"title":"Cusco - 16mm Front Anti Roll Bar - Toyota 86 ZN6","handle":"cusco-16mm-front-anti-roll-bar-toyota-86-zn6-965-311-a16","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 965 311 A16\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?16mm. Re-Use Your Oem Bushings.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e86 | ZN6 (Spec A to E) | 2012-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e","published_at":"2024-02-05T16:33:50+08:00","created_at":"2024-02-05T15:05:23+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["2-points","2012","2013","2014","2015","2016","2017","2018","86-zn6-spec-a-to-e-2012-2018-na-4u-gse-h4","anti-roll-bars","bars-and-braces","cusco-japan","cusco-japan30","front","jp1","steel","toyota","ws123"],"price":23960,"price_min":23960,"price_max":23960,"available":true,"price_varies":false,"compare_at_price":29400,"compare_at_price_min":29400,"compare_at_price_max":29400,"compare_at_price_varies":false,"variants":[{"id":42666273996982,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"965 311 A16","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - 16mm Front Anti Roll Bar - Toyota 86 ZN6","public_title":null,"options":["Default Title"],"price":23960,"weight":12000,"compare_at_price":29400,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-16mm-front-anti-roll-bar-toyota-86-zn6-rzcrew.jpg?v=1710314076"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-16mm-front-anti-roll-bar-toyota-86-zn6-rzcrew.jpg?v=1710314076","options":["Title"],"media":[{"alt":"Cusco - 16mm Front Anti Roll Bar - Toyota 86 ZN6 - 965 311 A16","id":27149735887030,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-16mm-front-anti-roll-bar-toyota-86-zn6-rzcrew.jpg?v=1710314076"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-16mm-front-anti-roll-bar-toyota-86-zn6-rzcrew.jpg?v=1710314076","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 965 311 A16\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?16mm. Re-Use Your Oem Bushings.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e86 | ZN6 (Spec A to E) | 2012-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e"}

{"id":7765308932278,"title":"Cusco - 16mm Rear Anti Roll Bar - Toyota 86 ZN6","handle":"cusco-16mm-rear-anti-roll-bar-toyota-86-zn6-965-311-b16","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 965 311 B16\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Rear\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?16mm. Re-Use Your Oem Bushings.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e86 | ZN6 (Spec A to E) | 2012-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e","published_at":"2024-02-05T16:33:50+08:00","created_at":"2024-02-05T15:05:26+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["2-points","2012","2013","2014","2015","2016","2017","2018","86-zn6-spec-a-to-e-2012-2018-na-4u-gse-h4","anti-roll-bars","bars-and-braces","cusco-japan","cusco-japan30","jp1","rear","steel","toyota","ws123"],"price":25560,"price_min":25560,"price_max":25560,"available":true,"price_varies":false,"compare_at_price":31400,"compare_at_price_min":31400,"compare_at_price_max":31400,"compare_at_price_varies":false,"variants":[{"id":42666274128054,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"965 311 B16","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - 16mm Rear Anti Roll Bar - Toyota 86 ZN6","public_title":null,"options":["Default Title"],"price":25560,"weight":12000,"compare_at_price":31400,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-16mm-rear-anti-roll-bar-toyota-86-zn6-rzcrew.jpg?v=1710314075"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-16mm-rear-anti-roll-bar-toyota-86-zn6-rzcrew.jpg?v=1710314075","options":["Title"],"media":[{"alt":"Cusco - 16mm Rear Anti Roll Bar - Toyota 86 ZN6 - 965 311 B16","id":27149735985334,"position":1,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-16mm-rear-anti-roll-bar-toyota-86-zn6-rzcrew.jpg?v=1710314075"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-16mm-rear-anti-roll-bar-toyota-86-zn6-rzcrew.jpg?v=1710314075","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 965 311 B16\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Rear\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?16mm. Re-Use Your Oem Bushings.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e86 | ZN6 (Spec A to E) | 2012-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e"}

{"id":7765308801206,"title":"Cusco - 20mm Front Anti Roll Bar - Toyota 86 ZN6","handle":"cusco-20mm-front-anti-roll-bar-toyota-86-zn6-965-311-a20","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 965 311 A20\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?20mm. Bushings Included.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e86 | ZN6 (Spec A to E) | 2012-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e","published_at":"2024-02-05T16:33:55+08:00","created_at":"2024-02-05T15:05:20+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["2-points","2012","2013","2014","2015","2016","2017","2018","86-zn6-spec-a-to-e-2012-2018-na-4u-gse-h4","anti-roll-bars","bars-and-braces","cusco-japan","cusco-japan30","front","jp1","steel","toyota","ws123"],"price":23960,"price_min":23960,"price_max":23960,"available":true,"price_varies":false,"compare_at_price":29400,"compare_at_price_min":29400,"compare_at_price_max":29400,"compare_at_price_varies":false,"variants":[{"id":42666273964214,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"965 311 A20","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - 20mm Front Anti Roll Bar - Toyota 86 ZN6","public_title":null,"options":["Default Title"],"price":23960,"weight":12000,"compare_at_price":29400,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-20mm-front-anti-roll-bar-toyota-86-zn6-rzcrew.jpg?v=1710314076"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-20mm-front-anti-roll-bar-toyota-86-zn6-rzcrew.jpg?v=1710314076","options":["Title"],"media":[{"alt":"Cusco - 20mm Front Anti Roll Bar - Toyota 86 ZN6 - 965 311 A20","id":27149735854262,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-20mm-front-anti-roll-bar-toyota-86-zn6-rzcrew.jpg?v=1710314076"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-20mm-front-anti-roll-bar-toyota-86-zn6-rzcrew.jpg?v=1710314076","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 965 311 A20\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?20mm. Bushings Included.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e86 | ZN6 (Spec A to E) | 2012-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e"}

{"id":7765308768438,"title":"Cusco - 26mm Rear Anti Roll Bar - Toyota C-HR ZYX10","handle":"cusco-26mm-rear-anti-roll-bar-toyota-c-hr-zyx10-1a7-311-b26","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 1A7 311 B26\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Rear\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?26, 125% Compare To Standard *Standard ?24.5mm. Bushings And Bracket Included!\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eC-HR | ZYX10 | 2016-2018 | NA | 2ZR-FE | I4\u003c!--split--\u003e","published_at":"2024-02-05T16:33:52+08:00","created_at":"2024-02-05T15:05:17+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["2-points","2016","2017","2018","anti-roll-bars","bars-and-braces","c-hr-zyx10-2016-2018-na-2zr-fe-i4","cusco-japan","cusco-japan30","jp1","rear","steel","toyota","ws123"],"price":29550,"price_min":29550,"price_max":29550,"available":true,"price_varies":false,"compare_at_price":36300,"compare_at_price_min":36300,"compare_at_price_max":36300,"compare_at_price_varies":false,"variants":[{"id":42666273931446,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1A7 311 B26","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - 26mm Rear Anti Roll Bar - Toyota C-HR ZYX10","public_title":null,"options":["Default Title"],"price":29550,"weight":12000,"compare_at_price":36300,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-26mm-rear-anti-roll-bar-toyota-c-hr-zyx10-rzcrew.jpg?v=1710314076"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-26mm-rear-anti-roll-bar-toyota-c-hr-zyx10-rzcrew.jpg?v=1710314076","options":["Title"],"media":[{"alt":"Cusco - 26mm Rear Anti Roll Bar - Toyota C-HR ZYX10 - 1A7 311 B26","id":27149735690422,"position":1,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-26mm-rear-anti-roll-bar-toyota-c-hr-zyx10-rzcrew.jpg?v=1710314076"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-26mm-rear-anti-roll-bar-toyota-c-hr-zyx10-rzcrew.jpg?v=1710314076","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 1A7 311 B26\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Rear\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?26, 125% Compare To Standard *Standard ?24.5mm. Bushings And Bracket Included!\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eC-HR | ZYX10 | 2016-2018 | NA | 2ZR-FE | I4\u003c!--split--\u003e"}

{"id":7765308702902,"title":"Cusco - 28mm Front Anti Roll Bar - Toyota C-HR NGX50","handle":"cusco-28mm-front-anti-roll-bar-toyota-c-hr-ngx50-1a7-311-a28","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 1A7 311 A28\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?28, 131% Compare To Standard *Standard ?27mm. Re-Use Your Oem Bushings And Brackets.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eC-HR | NGX50 | 2016-2018 | TC | 8NR-FTS | I4\u003c!--split--\u003e","published_at":"2024-02-05T16:33:50+08:00","created_at":"2024-02-05T15:05:11+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["2-points","2016","2017","2018","anti-roll-bars","bars-and-braces","c-hr-ngx50-2016-2018-tc-8nr-fts-i4","cusco-japan","cusco-japan30","front","jp1","steel","toyota","ws124"],"price":30350,"price_min":30350,"price_max":30350,"available":true,"price_varies":false,"compare_at_price":37300,"compare_at_price_min":37300,"compare_at_price_max":37300,"compare_at_price_varies":false,"variants":[{"id":42666273865910,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1A7 311 A28","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - 28mm Front Anti Roll Bar - Toyota C-HR NGX50","public_title":null,"options":["Default Title"],"price":30350,"weight":12000,"compare_at_price":37300,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-28mm-front-anti-roll-bar-toyota-c-hr-ngx50-rzcrew.jpg?v=1710314077"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-28mm-front-anti-roll-bar-toyota-c-hr-ngx50-rzcrew.jpg?v=1710314077","options":["Title"],"media":[{"alt":"Cusco - 28mm Front Anti Roll Bar - Toyota C-HR NGX50 - 1A7 311 A28","id":27149735624886,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-28mm-front-anti-roll-bar-toyota-c-hr-ngx50-rzcrew.jpg?v=1710314077"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-28mm-front-anti-roll-bar-toyota-c-hr-ngx50-rzcrew.jpg?v=1710314077","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 1A7 311 A28\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?28, 131% Compare To Standard *Standard ?27mm. Re-Use Your Oem Bushings And Brackets.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eC-HR | NGX50 | 2016-2018 | TC | 8NR-FTS | I4\u003c!--split--\u003e"}

{"id":7765308735670,"title":"Cusco - 28mm Front Anti Roll Bar - Toyota C-HR ZYX10","handle":"cusco-28mm-front-anti-roll-bar-toyota-c-hr-zyx10-1a7-311-a28","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 1A7 311 A28\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?28, 131% Compare To Standard *Standard ?27mm. Re-Use Your Oem Bushings And Brackets.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eC-HR | ZYX10 | 2016-2018 | NA | 2ZR-FE | I4\u003c!--split--\u003e","published_at":"2024-02-05T16:33:51+08:00","created_at":"2024-02-05T15:05:14+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["2-points","2016","2017","2018","anti-roll-bars","bars-and-braces","c-hr-zyx10-2016-2018-na-2zr-fe-i4","cusco-japan","cusco-japan30","front","jp1","steel","toyota","ws124"],"price":30350,"price_min":30350,"price_max":30350,"available":true,"price_varies":false,"compare_at_price":37300,"compare_at_price_min":37300,"compare_at_price_max":37300,"compare_at_price_varies":false,"variants":[{"id":42666273898678,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1A7 311 A28","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - 28mm Front Anti Roll Bar - Toyota C-HR ZYX10","public_title":null,"options":["Default Title"],"price":30350,"weight":12000,"compare_at_price":37300,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-28mm-front-anti-roll-bar-toyota-c-hr-zyx10-rzcrew.jpg?v=1710314077"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-28mm-front-anti-roll-bar-toyota-c-hr-zyx10-rzcrew.jpg?v=1710314077","options":["Title"],"media":[{"alt":"Cusco - 28mm Front Anti Roll Bar - Toyota C-HR ZYX10 - 1A7 311 A28","id":27149735657654,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-28mm-front-anti-roll-bar-toyota-c-hr-zyx10-rzcrew.jpg?v=1710314077"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-28mm-front-anti-roll-bar-toyota-c-hr-zyx10-rzcrew.jpg?v=1710314077","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 1A7 311 A28\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?28, 131% Compare To Standard *Standard ?27mm. Re-Use Your Oem Bushings And Brackets.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eC-HR | ZYX10 | 2016-2018 | NA | 2ZR-FE | I4\u003c!--split--\u003e"}

{"id":6581449425078,"title":"Cusco - Front Adjustable Sway Stabilizer Bar Link Set - M10 X P1.25 - 225-255mm","handle":"cusco-front-adjustable-sway-stabilizer-bar-link-set-m10-x-p1-25-225-255mm-00b-318-b22","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePosition: Front\u003cbr\u003eAdjustment Range: 225-255mm\u003cbr\u003eLowering Adjustment Range: NA\u003cbr\u003e\u003cbr\u003eThese items are a replacement for the factory sway\/stabilizer bar links and designed to improve handling by fine tuning of the stabilizer bar. On lowered vehicles the geometry of the stabilizer changes which does not allow the stabilizer to work at full potential. Enjoy the improved performance and styling of a low down car and still keep all the handling and road grip necessary for spirited driving and racing. A universal item that for any application that matches the thread and pitch combination and fits within the adjustable range.\u003cbr\u003e\u003cbr\u003eProduct: Adjustable Sway Stabilizer Bar Link Set Front - M10 X P1.25 225-255mm\u003cbr\u003ePart Num: 00B-318-B22\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003eThread\/Pitch: M10 X P1.25\u003cbr\u003eRod Length (mm): 155 \u003cbr\u003eOverall Adjustability (mm):\u003cbr\u003e-Minimum: 225\u003cbr\u003e-Maximum: 255\u003cbr\u003eJAN Code: 4996338062512\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e","published_at":"2021-03-16T11:24:09+08:00","created_at":"2021-03-16T11:24:10+08:00","vendor":"Cusco Japan","type":"Camber Kits and Alignement","tags":["1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","alfa-romeo","Aston Martin","audi","bmw","Bmw-Mini","camber-kits-and-alignement","chevrolet","citroen","cusco-japan","daihatsu","Ferrari","fiat","ford","front","honda","hyundai","jp1","kia","lexus","lotus","mazda","mercedes-benz","mitsubishi","nissan","opel","peugeot","porsche","renault","roll-center-adjuster","seat","skoda","subaru","suzuki","toyota","volkswagen","volvo","ws122"],"price":19980,"price_min":19980,"price_max":19980,"available":true,"price_varies":false,"compare_at_price":24300,"compare_at_price_min":24300,"compare_at_price_max":24300,"compare_at_price_varies":false,"variants":[{"id":39371428462774,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"00B 318 B22","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - Front Adjustable Sway Stabilizer Bar Link Set - M10 X P1.25 - 225-255mm","public_title":null,"options":["Default Title"],"price":19980,"weight":1900,"compare_at_price":24300,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-front-adjustable-sway-stabilizer-bar-link-set-m10-x-p1-25-225-255mm-rzcrew.jpg?v=1710326192"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-front-adjustable-sway-stabilizer-bar-link-set-m10-x-p1-25-225-255mm-rzcrew.jpg?v=1710326192","options":["Title"],"media":[{"alt":"Cusco Japan - Cusco - Front Adjustable Sway Stabilizer Bar Link Set - M10 X P1.25 - 225-255mm - 00B 318 B22 - Rzcrewgarage","id":25428845658294,"position":1,"preview_image":{"aspect_ratio":1.227,"height":418,"width":513,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-front-adjustable-sway-stabilizer-bar-link-set-m10-x-p1-25-225-255mm-rzcrew.jpg?v=1710326192"},"aspect_ratio":1.227,"height":418,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-front-adjustable-sway-stabilizer-bar-link-set-m10-x-p1-25-225-255mm-rzcrew.jpg?v=1710326192","width":513}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePosition: Front\u003cbr\u003eAdjustment Range: 225-255mm\u003cbr\u003eLowering Adjustment Range: NA\u003cbr\u003e\u003cbr\u003eThese items are a replacement for the factory sway\/stabilizer bar links and designed to improve handling by fine tuning of the stabilizer bar. On lowered vehicles the geometry of the stabilizer changes which does not allow the stabilizer to work at full potential. Enjoy the improved performance and styling of a low down car and still keep all the handling and road grip necessary for spirited driving and racing. A universal item that for any application that matches the thread and pitch combination and fits within the adjustable range.\u003cbr\u003e\u003cbr\u003eProduct: Adjustable Sway Stabilizer Bar Link Set Front - M10 X P1.25 225-255mm\u003cbr\u003ePart Num: 00B-318-B22\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003eThread\/Pitch: M10 X P1.25\u003cbr\u003eRod Length (mm): 155 \u003cbr\u003eOverall Adjustability (mm):\u003cbr\u003e-Minimum: 225\u003cbr\u003e-Maximum: 255\u003cbr\u003eJAN Code: 4996338062512\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e"}

{"id":6581449130166,"title":"Cusco - Front Adjustable Sway Stabilizer Bar Link Set - M10 X P1.25 - 265-295mm","handle":"cusco-front-adjustable-sway-stabilizer-bar-link-set-m10-x-p1-25-265-295mm-00b-318-b26","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePosition: Front\u003cbr\u003eAdjustment Range: 265-295mm\u003cbr\u003eLowering Adjustment Range: NA\u003cbr\u003e\u003cbr\u003eThese items are a replacement for the factory sway\/stabilizer bar links and designed to improve handling by fine tuning of the stabilizer bar. On lowered vehicles the geometry of the stabilizer changes which does not allow the stabilizer to work at full potential. Enjoy the improved performance and styling of a low down car and still keep all the handling and road grip necessary for spirited driving and racing. A universal item that for any application that matches the thread and pitch combination and fits within the adjustable range.\u003cbr\u003e\u003cbr\u003eProduct: Adjustable Sway Stabilizer Bar Link Set Front - M10 X P1.25 265-295mm\u003cbr\u003ePart Num: 00B 318 B26\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003eThread\/Pitch: M10 X P1.25\u003cbr\u003eRod Length (mm): 195\u003cbr\u003eOverall Adjustability (mm):\u003cbr\u003e-Minimum: 265\u003cbr\u003e-Maximum: 295 \u003cbr\u003eJAN Code: 4996338062529\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e","published_at":"2021-03-16T11:24:03+08:00","created_at":"2021-03-16T11:24:05+08:00","vendor":"Cusco Japan","type":"Camber Kits and Alignement","tags":["1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","alfa-romeo","Aston Martin","audi","bmw","Bmw-Mini","camber-kits-and-alignement","chevrolet","citroen","cusco-japan","daihatsu","Ferrari","fiat","ford","front","honda","hyundai","jp1","kia","lexus","lotus","mazda","mercedes-benz","mitsubishi","nissan","opel","peugeot","porsche","renault","roll-center-adjuster","seat","skoda","subaru","suzuki","toyota","volkswagen","volvo","ws122"],"price":19980,"price_min":19980,"price_max":19980,"available":true,"price_varies":false,"compare_at_price":24300,"compare_at_price_min":24300,"compare_at_price_max":24300,"compare_at_price_varies":false,"variants":[{"id":39371427741878,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"00B 318 B26","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - Front Adjustable Sway Stabilizer Bar Link Set - M10 X P1.25 - 265-295mm","public_title":null,"options":["Default Title"],"price":19980,"weight":1900,"compare_at_price":24300,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-front-adjustable-sway-stabilizer-bar-link-set-m10-x-p1-25-265-295mm-rzcrew.jpg?v=1710326194"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-front-adjustable-sway-stabilizer-bar-link-set-m10-x-p1-25-265-295mm-rzcrew.jpg?v=1710326194","options":["Title"],"media":[{"alt":"Cusco Japan - Cusco - Front Adjustable Sway Stabilizer Bar Link Set - M10 X P1.25 - 265-295mm - 00B 318 B26 - Rzcrewgarage","id":25428844380342,"position":1,"preview_image":{"aspect_ratio":1.227,"height":418,"width":513,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-front-adjustable-sway-stabilizer-bar-link-set-m10-x-p1-25-265-295mm-rzcrew.jpg?v=1710326194"},"aspect_ratio":1.227,"height":418,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-front-adjustable-sway-stabilizer-bar-link-set-m10-x-p1-25-265-295mm-rzcrew.jpg?v=1710326194","width":513}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePosition: Front\u003cbr\u003eAdjustment Range: 265-295mm\u003cbr\u003eLowering Adjustment Range: NA\u003cbr\u003e\u003cbr\u003eThese items are a replacement for the factory sway\/stabilizer bar links and designed to improve handling by fine tuning of the stabilizer bar. On lowered vehicles the geometry of the stabilizer changes which does not allow the stabilizer to work at full potential. Enjoy the improved performance and styling of a low down car and still keep all the handling and road grip necessary for spirited driving and racing. A universal item that for any application that matches the thread and pitch combination and fits within the adjustable range.\u003cbr\u003e\u003cbr\u003eProduct: Adjustable Sway Stabilizer Bar Link Set Front - M10 X P1.25 265-295mm\u003cbr\u003ePart Num: 00B 318 B26\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003eThread\/Pitch: M10 X P1.25\u003cbr\u003eRod Length (mm): 195\u003cbr\u003eOverall Adjustability (mm):\u003cbr\u003e-Minimum: 265\u003cbr\u003e-Maximum: 295 \u003cbr\u003eJAN Code: 4996338062529\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e"}

{"id":6581449228470,"title":"Cusco - Front Adjustable Sway Stabilizer Bar Link Set - M10 X P1.25 - 305-335mm","handle":"cusco-front-adjustable-sway-stabilizer-bar-link-set-m10-x-p1-25-305-335mm-00b-318-b30","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePosition: Front\u003cbr\u003eAdjustment Range: 305-335mm\u003cbr\u003eLowering Adjustment Range: NA\u003cbr\u003e\u003cbr\u003eThese items are a replacement for the factory sway\/stabilizer bar links and designed to improve handling by fine tuning of the stabilizer bar. On lowered vehicles the geometry of the stabilizer changes which does not allow the stabilizer to work at full potential. Enjoy the improved performance and styling of a low down car and still keep all the handling and road grip necessary for spirited driving and racing. A universal item that for any application that matches the thread and pitch combination and fits within the adjustable range.\u003cbr\u003e\u003cbr\u003eProduct: Adjustable Sway Stabilizer Bar Link Set Front - M10 X P1.25 305-335mm\u003cbr\u003ePart Num: 00B 318 B30\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003eThread\/Pitch: M10 X P1.25\u003cbr\u003eRod Length (mm): 235\u003cbr\u003eOverall Adjustability (mm):\u003cbr\u003e-Minimum: 305\u003cbr\u003e-Maximum: 335\u003cbr\u003eJAN Code: 4996338062536\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e","published_at":"2021-03-16T11:24:06+08:00","created_at":"2021-03-16T11:24:07+08:00","vendor":"Cusco Japan","type":"Camber Kits and Alignement","tags":["1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","alfa-romeo","Aston Martin","audi","bmw","Bmw-Mini","camber-kits-and-alignement","chevrolet","citroen","cusco-japan","daihatsu","Ferrari","fiat","ford","front","honda","hyundai","jp1","kia","lexus","lotus","mazda","mercedes-benz","mitsubishi","nissan","opel","peugeot","porsche","renault","roll-center-adjuster","seat","skoda","subaru","suzuki","toyota","volkswagen","volvo","ws122"],"price":19980,"price_min":19980,"price_max":19980,"available":true,"price_varies":false,"compare_at_price":24300,"compare_at_price_min":24300,"compare_at_price_max":24300,"compare_at_price_varies":false,"variants":[{"id":39371427807414,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"00B 318 B30","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - Front Adjustable Sway Stabilizer Bar Link Set - M10 X P1.25 - 305-335mm","public_title":null,"options":["Default Title"],"price":19980,"weight":1900,"compare_at_price":24300,"inventory_quantity":41,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-front-adjustable-sway-stabilizer-bar-link-set-m10-x-p1-25-305-335mm-rzcrew.jpg?v=1710326194"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-front-adjustable-sway-stabilizer-bar-link-set-m10-x-p1-25-305-335mm-rzcrew.jpg?v=1710326194","options":["Title"],"media":[{"alt":"Cusco Japan - Cusco - Front Adjustable Sway Stabilizer Bar Link Set - M10 X P1.25 - 305-335mm - 00B 318 B30 - Rzcrewgarage","id":25428844478646,"position":1,"preview_image":{"aspect_ratio":1.5,"height":1600,"width":2400,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-front-adjustable-sway-stabilizer-bar-link-set-m10-x-p1-25-305-335mm-rzcrew.jpg?v=1710326194"},"aspect_ratio":1.5,"height":1600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-front-adjustable-sway-stabilizer-bar-link-set-m10-x-p1-25-305-335mm-rzcrew.jpg?v=1710326194","width":2400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePosition: Front\u003cbr\u003eAdjustment Range: 305-335mm\u003cbr\u003eLowering Adjustment Range: NA\u003cbr\u003e\u003cbr\u003eThese items are a replacement for the factory sway\/stabilizer bar links and designed to improve handling by fine tuning of the stabilizer bar. On lowered vehicles the geometry of the stabilizer changes which does not allow the stabilizer to work at full potential. Enjoy the improved performance and styling of a low down car and still keep all the handling and road grip necessary for spirited driving and racing. A universal item that for any application that matches the thread and pitch combination and fits within the adjustable range.\u003cbr\u003e\u003cbr\u003eProduct: Adjustable Sway Stabilizer Bar Link Set Front - M10 X P1.25 305-335mm\u003cbr\u003ePart Num: 00B 318 B30\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003eThread\/Pitch: M10 X P1.25\u003cbr\u003eRod Length (mm): 235\u003cbr\u003eOverall Adjustability (mm):\u003cbr\u003e-Minimum: 305\u003cbr\u003e-Maximum: 335\u003cbr\u003eJAN Code: 4996338062536\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e"}

{"id":6581449326774,"title":"Cusco - Front Adjustable Sway Stabilizer Bar Link Set - M10 X P1.25 - 345-375mm","handle":"cusco-front-adjustable-sway-stabilizer-bar-link-set-m10-x-p1-25-345-375mm-00b-318-b34","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePosition: Front\u003cbr\u003eAdjustment Range: 345-375mm\u003cbr\u003eLowering Adjustment Range: NA\u003cbr\u003e\u003cbr\u003eThese items are a replacement for the factory sway\/stabilizer bar links and designed to improve handling by fine tuning of the stabilizer bar. On lowered vehicles the geometry of the stabilizer changes which does not allow the stabilizer to work at full potential. Enjoy the improved performance and styling of a low down car and still keep all the handling and road grip necessary for spirited driving and racing. A universal item that for any application that matches the thread and pitch combination and fits within the adjustable range.\u003cbr\u003e\u003cbr\u003eProduct: Adjustable Sway Stabilizer Bar Link Set Front - M10 X P1.25 345-375mm\u003cbr\u003ePart Num: 00B 318 B34\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003eThread\/Pitch: M10 X P1.25\u003cbr\u003eRod Length (mm): 275\u003cbr\u003eOverall Adjustability (mm):\u003cbr\u003e-Minimum: 345\u003cbr\u003e-Maximum: 375\u003cbr\u003eJAN Code: 4996338062543\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e","published_at":"2021-03-16T11:24:08+08:00","created_at":"2021-03-16T11:24:08+08:00","vendor":"Cusco Japan","type":"Camber Kits and Alignement","tags":["1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","alfa-romeo","Aston Martin","audi","bmw","Bmw-Mini","camber-kits-and-alignement","chevrolet","citroen","cusco-japan","daihatsu","Ferrari","fiat","ford","front","honda","hyundai","jp1","kia","lexus","lotus","mazda","mercedes-benz","mitsubishi","nissan","opel","peugeot","porsche","renault","roll-center-adjuster","seat","skoda","subaru","suzuki","toyota","volkswagen","volvo","ws122"],"price":19980,"price_min":19980,"price_max":19980,"available":true,"price_varies":false,"compare_at_price":24300,"compare_at_price_min":24300,"compare_at_price_max":24300,"compare_at_price_varies":false,"variants":[{"id":39371427905718,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"00B 318 B34","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - Front Adjustable Sway Stabilizer Bar Link Set - M10 X P1.25 - 345-375mm","public_title":null,"options":["Default Title"],"price":19980,"weight":1900,"compare_at_price":24300,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-front-adjustable-sway-stabilizer-bar-link-set-m10-x-p1-25-345-375mm-rzcrew.jpg?v=1710326192"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-front-adjustable-sway-stabilizer-bar-link-set-m10-x-p1-25-345-375mm-rzcrew.jpg?v=1710326192","options":["Title"],"media":[{"alt":"Cusco Japan - Cusco - Front Adjustable Sway Stabilizer Bar Link Set - M10 X P1.25 - 345-375mm - 00B 318 B34 - Rzcrewgarage","id":25428844806326,"position":1,"preview_image":{"aspect_ratio":1.5,"height":1600,"width":2400,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-front-adjustable-sway-stabilizer-bar-link-set-m10-x-p1-25-345-375mm-rzcrew.jpg?v=1710326192"},"aspect_ratio":1.5,"height":1600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-front-adjustable-sway-stabilizer-bar-link-set-m10-x-p1-25-345-375mm-rzcrew.jpg?v=1710326192","width":2400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePosition: Front\u003cbr\u003eAdjustment Range: 345-375mm\u003cbr\u003eLowering Adjustment Range: NA\u003cbr\u003e\u003cbr\u003eThese items are a replacement for the factory sway\/stabilizer bar links and designed to improve handling by fine tuning of the stabilizer bar. On lowered vehicles the geometry of the stabilizer changes which does not allow the stabilizer to work at full potential. Enjoy the improved performance and styling of a low down car and still keep all the handling and road grip necessary for spirited driving and racing. A universal item that for any application that matches the thread and pitch combination and fits within the adjustable range.\u003cbr\u003e\u003cbr\u003eProduct: Adjustable Sway Stabilizer Bar Link Set Front - M10 X P1.25 345-375mm\u003cbr\u003ePart Num: 00B 318 B34\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003eThread\/Pitch: M10 X P1.25\u003cbr\u003eRod Length (mm): 275\u003cbr\u003eOverall Adjustability (mm):\u003cbr\u003e-Minimum: 345\u003cbr\u003e-Maximum: 375\u003cbr\u003eJAN Code: 4996338062543\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e"}

{"id":6581449621686,"title":"Cusco - Front Adjustable Sway Stabilizer Bar Link Set - M12 X P1.25 - 225-255mm","handle":"cusco-front-adjustable-sway-stabilizer-bar-link-set-m12-x-p1-25-225-255mm-00b-318-a22","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePosition: Front\u003cbr\u003eAdjustment Range: 225-255mm\u003cbr\u003eLowering Adjustment Range: NA\u003cbr\u003e\u003cbr\u003eThese items are a replacement for the factory sway\/stabilizer bar links and designed to improve handling by fine tuning of the stabilizer bar. On lowered vehicles the geometry of the stabilizer changes which does not allow the stabilizer to work at full potential. Enjoy the improved performance and styling of a low down car and still keep all the handling and road grip necessary for spirited driving and racing. A universal item that for any application that matches the thread and pitch combination and fits within the adjustable range.\u003cbr\u003e\u003cbr\u003eProduct: Adjustable Sway Stabilizer Bar Link Set Front - M12 X P1.25 225-255mm\u003cbr\u003ePart Num: 00B-318-A22(00B 318 A22)\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003eThread\/Pitch: M12 X P1.25\u003cbr\u003eRod Length (mm): 155 \u003cbr\u003eOverall Adjustability (mm):\u003cbr\u003e-Minimum: 225\u003cbr\u003e-Maximum: 255\u003cbr\u003eJAN Code: 4996338062444\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e","published_at":"2021-03-16T11:24:13+08:00","created_at":"2021-03-16T11:24:14+08:00","vendor":"Cusco Japan","type":"Camber Kits and Alignement","tags":["1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","alfa-romeo","Aston Martin","audi","bmw","Bmw-Mini","camber-kits-and-alignement","chevrolet","citroen","cusco-japan","daihatsu","Ferrari","fiat","ford","front","honda","hyundai","jp1","kia","lexus","lotus","mazda","mercedes-benz","mitsubishi","nissan","opel","peugeot","porsche","renault","roll-center-adjuster","seat","skoda","subaru","suzuki","toyota","volkswagen","volvo","ws122"],"price":19980,"price_min":19980,"price_max":19980,"available":true,"price_varies":false,"compare_at_price":24300,"compare_at_price_min":24300,"compare_at_price_max":24300,"compare_at_price_varies":false,"variants":[{"id":39371429019830,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"00B 318 A22","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - Front Adjustable Sway Stabilizer Bar Link Set - M12 X P1.25 - 225-255mm","public_title":null,"options":["Default Title"],"price":19980,"weight":1900,"compare_at_price":24300,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-front-adjustable-sway-stabilizer-bar-link-set-m12-x-p1-25-225-255mm-rzcrew.jpg?v=1710326192"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-front-adjustable-sway-stabilizer-bar-link-set-m12-x-p1-25-225-255mm-rzcrew.jpg?v=1710326192","options":["Title"],"media":[{"alt":"Cusco Japan - Cusco - Front Adjustable Sway Stabilizer Bar Link Set - M12 X P1.25 - 225-255mm - 00B 318 A22 - Rzcrewgarage","id":25428846477494,"position":1,"preview_image":{"aspect_ratio":1.5,"height":1600,"width":2400,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-front-adjustable-sway-stabilizer-bar-link-set-m12-x-p1-25-225-255mm-rzcrew.jpg?v=1710326192"},"aspect_ratio":1.5,"height":1600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-front-adjustable-sway-stabilizer-bar-link-set-m12-x-p1-25-225-255mm-rzcrew.jpg?v=1710326192","width":2400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePosition: Front\u003cbr\u003eAdjustment Range: 225-255mm\u003cbr\u003eLowering Adjustment Range: NA\u003cbr\u003e\u003cbr\u003eThese items are a replacement for the factory sway\/stabilizer bar links and designed to improve handling by fine tuning of the stabilizer bar. On lowered vehicles the geometry of the stabilizer changes which does not allow the stabilizer to work at full potential. Enjoy the improved performance and styling of a low down car and still keep all the handling and road grip necessary for spirited driving and racing. A universal item that for any application that matches the thread and pitch combination and fits within the adjustable range.\u003cbr\u003e\u003cbr\u003eProduct: Adjustable Sway Stabilizer Bar Link Set Front - M12 X P1.25 225-255mm\u003cbr\u003ePart Num: 00B-318-A22(00B 318 A22)\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003eThread\/Pitch: M12 X P1.25\u003cbr\u003eRod Length (mm): 155 \u003cbr\u003eOverall Adjustability (mm):\u003cbr\u003e-Minimum: 225\u003cbr\u003e-Maximum: 255\u003cbr\u003eJAN Code: 4996338062444\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e"}

{"id":6581449556150,"title":"Cusco - Front Adjustable Sway Stabilizer Bar Link Set - M12 X P1.25 - 265-295mm","handle":"cusco-front-adjustable-sway-stabilizer-bar-link-set-m12-x-p1-25-265-295mm-00b-318-a26","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePosition: Front\u003cbr\u003eAdjustment Range: 265-295mm\u003cbr\u003eLowering Adjustment Range: NA\u003cbr\u003e\u003cbr\u003eThese items are a replacement for the factory sway\/stabilizer bar links and designed to improve handling by fine tuning of the stabilizer bar. On lowered vehicles the geometry of the stabilizer changes which does not allow the stabilizer to work at full potential. Enjoy the improved performance and styling of a low down car and still keep all the handling and road grip necessary for spirited driving and racing. A universal item that for any application that matches the thread and pitch combination and fits within the adjustable range.\u003cbr\u003e\u003cbr\u003eProduct: Adjustable Sway Stabilizer Bar Link Set Front - M12 X P1.25 265-295mm\u003cbr\u003ePart Num: 00B 318 A26\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003eThread\/Pitch: M12 X P1.25\u003cbr\u003eRod Length (mm): 195\u003cbr\u003eOverall Adjustability (mm):\u003cbr\u003e-Minimum: 265\u003cbr\u003e-Maximum: 295 \u003cbr\u003eJAN Code: 4996338062451\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e","published_at":"2021-03-16T11:24:11+08:00","created_at":"2021-03-16T11:24:12+08:00","vendor":"Cusco Japan","type":"Camber Kits and Alignement","tags":["1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","alfa-romeo","Aston Martin","audi","bmw","Bmw-Mini","camber-kits-and-alignement","chevrolet","citroen","cusco-japan","daihatsu","Ferrari","fiat","ford","front","honda","hyundai","jp1","kia","lexus","lotus","mazda","mercedes-benz","mitsubishi","nissan","opel","peugeot","porsche","renault","roll-center-adjuster","seat","skoda","subaru","suzuki","toyota","volkswagen","volvo","ws122"],"price":19980,"price_min":19980,"price_max":19980,"available":true,"price_varies":false,"compare_at_price":24300,"compare_at_price_min":24300,"compare_at_price_max":24300,"compare_at_price_varies":false,"variants":[{"id":39371428987062,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"00B 318 A26","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - Front Adjustable Sway Stabilizer Bar Link Set - M12 X P1.25 - 265-295mm","public_title":null,"options":["Default Title"],"price":19980,"weight":1900,"compare_at_price":24300,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-front-adjustable-sway-stabilizer-bar-link-set-m12-x-p1-25-265-295mm-rzcrew.jpg?v=1710326192"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-front-adjustable-sway-stabilizer-bar-link-set-m12-x-p1-25-265-295mm-rzcrew.jpg?v=1710326192","options":["Title"],"media":[{"alt":"Cusco Japan - Cusco - Front Adjustable Sway Stabilizer Bar Link Set - M12 X P1.25 - 265-295mm - 00B 318 A26 - Rzcrewgarage","id":25428846215350,"position":1,"preview_image":{"aspect_ratio":1.5,"height":1600,"width":2400,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-front-adjustable-sway-stabilizer-bar-link-set-m12-x-p1-25-265-295mm-rzcrew.jpg?v=1710326192"},"aspect_ratio":1.5,"height":1600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-front-adjustable-sway-stabilizer-bar-link-set-m12-x-p1-25-265-295mm-rzcrew.jpg?v=1710326192","width":2400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePosition: Front\u003cbr\u003eAdjustment Range: 265-295mm\u003cbr\u003eLowering Adjustment Range: NA\u003cbr\u003e\u003cbr\u003eThese items are a replacement for the factory sway\/stabilizer bar links and designed to improve handling by fine tuning of the stabilizer bar. On lowered vehicles the geometry of the stabilizer changes which does not allow the stabilizer to work at full potential. Enjoy the improved performance and styling of a low down car and still keep all the handling and road grip necessary for spirited driving and racing. A universal item that for any application that matches the thread and pitch combination and fits within the adjustable range.\u003cbr\u003e\u003cbr\u003eProduct: Adjustable Sway Stabilizer Bar Link Set Front - M12 X P1.25 265-295mm\u003cbr\u003ePart Num: 00B 318 A26\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003eThread\/Pitch: M12 X P1.25\u003cbr\u003eRod Length (mm): 195\u003cbr\u003eOverall Adjustability (mm):\u003cbr\u003e-Minimum: 265\u003cbr\u003e-Maximum: 295 \u003cbr\u003eJAN Code: 4996338062451\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e"}

{"id":6581449031862,"title":"Cusco - Front Adjustable Sway Stabilizer Bar Link Set - M12 X P1.25 - 305-335mm","handle":"cusco-front-adjustable-sway-stabilizer-bar-link-set-m12-x-p1-25-305-335mm-00b-318-a30","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePosition: Front\u003cbr\u003eAdjustment Range: 305-335mm\u003cbr\u003eLowering Adjustment Range: NA\u003cbr\u003e\u003cbr\u003eThese items are a replacement for the factory sway\/stabilizer bar links and designed to improve handling by fine tuning of the stabilizer bar. On lowered vehicles the geometry of the stabilizer changes which does not allow the stabilizer to work at full potential. Enjoy the improved performance and styling of a low down car and still keep all the handling and road grip necessary for spirited driving and racing. A universal item that for any application that matches the thread and pitch combination and fits within the adjustable range.\u003cbr\u003e\u003cbr\u003eProduct: Adjustable Sway Stabilizer Bar Link Set Front - M12 X P1.25 305-335mm\u003cbr\u003ePart Num: 00B 318 A30\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003eThread\/Pitch: M12 X P1.25\u003cbr\u003eRod Length (mm): 235\u003cbr\u003eOverall Adjustability (mm):\u003cbr\u003e-Minimum: 305\u003cbr\u003e-Maximum: 335\u003cbr\u003eJAN Code: 4996338062468\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e","published_at":"2021-03-16T11:24:01+08:00","created_at":"2021-03-16T11:24:02+08:00","vendor":"Cusco Japan","type":"Camber Kits and Alignement","tags":["1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","alfa-romeo","Aston Martin","audi","bmw","Bmw-Mini","camber-kits-and-alignement","chevrolet","citroen","cusco-japan","daihatsu","Ferrari","fiat","ford","front","honda","hyundai","jp1","kia","lexus","lotus","mazda","mercedes-benz","mitsubishi","nissan","opel","peugeot","porsche","renault","roll-center-adjuster","seat","skoda","subaru","suzuki","toyota","volkswagen","volvo","ws122"],"price":19980,"price_min":19980,"price_max":19980,"available":true,"price_varies":false,"compare_at_price":24300,"compare_at_price_min":24300,"compare_at_price_max":24300,"compare_at_price_varies":false,"variants":[{"id":39371427578038,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"00B 318 A30","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - Front Adjustable Sway Stabilizer Bar Link Set - M12 X P1.25 - 305-335mm","public_title":null,"options":["Default Title"],"price":19980,"weight":1900,"compare_at_price":24300,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-front-adjustable-sway-stabilizer-bar-link-set-m12-x-p1-25-305-335mm-rzcrew.jpg?v=1710326194"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-front-adjustable-sway-stabilizer-bar-link-set-m12-x-p1-25-305-335mm-rzcrew.jpg?v=1710326194","options":["Title"],"media":[{"alt":"Cusco Japan - Cusco - Front Adjustable Sway Stabilizer Bar Link Set - M12 X P1.25 - 305-335mm - 00B 318 A30 - Rzcrewgarage","id":25428843954358,"position":1,"preview_image":{"aspect_ratio":1.5,"height":1600,"width":2400,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-front-adjustable-sway-stabilizer-bar-link-set-m12-x-p1-25-305-335mm-rzcrew.jpg?v=1710326194"},"aspect_ratio":1.5,"height":1600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-front-adjustable-sway-stabilizer-bar-link-set-m12-x-p1-25-305-335mm-rzcrew.jpg?v=1710326194","width":2400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePosition: Front\u003cbr\u003eAdjustment Range: 305-335mm\u003cbr\u003eLowering Adjustment Range: NA\u003cbr\u003e\u003cbr\u003eThese items are a replacement for the factory sway\/stabilizer bar links and designed to improve handling by fine tuning of the stabilizer bar. On lowered vehicles the geometry of the stabilizer changes which does not allow the stabilizer to work at full potential. Enjoy the improved performance and styling of a low down car and still keep all the handling and road grip necessary for spirited driving and racing. A universal item that for any application that matches the thread and pitch combination and fits within the adjustable range.\u003cbr\u003e\u003cbr\u003eProduct: Adjustable Sway Stabilizer Bar Link Set Front - M12 X P1.25 305-335mm\u003cbr\u003ePart Num: 00B 318 A30\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003eThread\/Pitch: M12 X P1.25\u003cbr\u003eRod Length (mm): 235\u003cbr\u003eOverall Adjustability (mm):\u003cbr\u003e-Minimum: 305\u003cbr\u003e-Maximum: 335\u003cbr\u003eJAN Code: 4996338062468\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e"}

{"id":6581448966326,"title":"Cusco - Front Adjustable Sway Stabilizer Bar Link Set - M12 X P1.25 - 345-375mm","handle":"cusco-front-adjustable-sway-stabilizer-bar-link-set-m12-x-p1-25-345-375mm-00b-318-a34","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePosition: Front\u003cbr\u003eAdjustment Range: 345-375mm\u003cbr\u003eLowering Adjustment Range: NA\u003cbr\u003e\u003cbr\u003eThese items are a replacement for the factory sway\/stabilizer bar links and designed to improve handling by fine tuning of the stabilizer bar. On lowered vehicles the geometry of the stabilizer changes which does not allow the stabilizer to work at full potential. Enjoy the improved performance and styling of a low down car and still keep all the handling and road grip necessary for spirited driving and racing. A universal item that for any application that matches the thread and pitch combination and fits within the adjustable range.\u003cbr\u003e\u003cbr\u003eProduct: Adjustable Sway Stabilizer Bar Link Set Front - M12 X P1.25 345-375mm\u003cbr\u003ePart Num: 00B 318 A34\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003eThread\/Pitch: M12 X P1.25\u003cbr\u003eRod Length (mm): 275\u003cbr\u003eOverall Adjustability (mm):\u003cbr\u003e-Minimum: 345\u003cbr\u003e-Maximum: 375\u003cbr\u003eJAN Code: 4996338062475\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e","published_at":"2021-03-16T11:23:56+08:00","created_at":"2021-03-16T11:23:58+08:00","vendor":"Cusco Japan","type":"Camber Kits and Alignement","tags":["1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","alfa-romeo","Aston Martin","audi","bmw","Bmw-Mini","camber-kits-and-alignement","chevrolet","citroen","cusco-japan","daihatsu","Ferrari","fiat","ford","front","honda","hyundai","jp1","kia","lexus","lotus","mazda","mercedes-benz","mitsubishi","nissan","opel","peugeot","porsche","renault","roll-center-adjuster","seat","skoda","subaru","suzuki","toyota","volkswagen","volvo","ws122"],"price":19980,"price_min":19980,"price_max":19980,"available":true,"price_varies":false,"compare_at_price":24300,"compare_at_price_min":24300,"compare_at_price_max":24300,"compare_at_price_varies":false,"variants":[{"id":39371427512502,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"00B 318 A34","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - Front Adjustable Sway Stabilizer Bar Link Set - M12 X P1.25 - 345-375mm","public_title":null,"options":["Default Title"],"price":19980,"weight":1900,"compare_at_price":24300,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-front-adjustable-sway-stabilizer-bar-link-set-m12-x-p1-25-345-375mm-rzcrew.jpg?v=1710326194"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-front-adjustable-sway-stabilizer-bar-link-set-m12-x-p1-25-345-375mm-rzcrew.jpg?v=1710326194","options":["Title"],"media":[{"alt":"Cusco Japan - Cusco - Front Adjustable Sway Stabilizer Bar Link Set - M12 X P1.25 - 345-375mm - 00B 318 A34 - Rzcrewgarage","id":25428843561142,"position":1,"preview_image":{"aspect_ratio":1.5,"height":1600,"width":2400,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-front-adjustable-sway-stabilizer-bar-link-set-m12-x-p1-25-345-375mm-rzcrew.jpg?v=1710326194"},"aspect_ratio":1.5,"height":1600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/cusco-front-adjustable-sway-stabilizer-bar-link-set-m12-x-p1-25-345-375mm-rzcrew.jpg?v=1710326194","width":2400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePosition: Front\u003cbr\u003eAdjustment Range: 345-375mm\u003cbr\u003eLowering Adjustment Range: NA\u003cbr\u003e\u003cbr\u003eThese items are a replacement for the factory sway\/stabilizer bar links and designed to improve handling by fine tuning of the stabilizer bar. On lowered vehicles the geometry of the stabilizer changes which does not allow the stabilizer to work at full potential. Enjoy the improved performance and styling of a low down car and still keep all the handling and road grip necessary for spirited driving and racing. A universal item that for any application that matches the thread and pitch combination and fits within the adjustable range.\u003cbr\u003e\u003cbr\u003eProduct: Adjustable Sway Stabilizer Bar Link Set Front - M12 X P1.25 345-375mm\u003cbr\u003ePart Num: 00B 318 A34\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eApplication: Front\u003cbr\u003eThread\/Pitch: M12 X P1.25\u003cbr\u003eRod Length (mm): 275\u003cbr\u003eOverall Adjustability (mm):\u003cbr\u003e-Minimum: 345\u003cbr\u003e-Maximum: 375\u003cbr\u003eJAN Code: 4996338062475\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eAlfa Romeo\u003cbr\u003eAston Martin\u003cbr\u003eAudi\u003cbr\u003eBmw\u003cbr\u003eBmw-Mini\u003cbr\u003eChevrolet\u003cbr\u003eCitroen\u003cbr\u003eDaihatsu\u003cbr\u003eFerrari\u003cbr\u003eFiat\u003cbr\u003eFord\u003cbr\u003eHonda\u003cbr\u003eHyundai\u003cbr\u003eKia\u003cbr\u003eLexus\u003cbr\u003eLotus\u003cbr\u003eMazda\u003cbr\u003eMercedes-Benz\u003cbr\u003eMitsubishi\u003cbr\u003eNissan\u003cbr\u003eOpel\u003cbr\u003ePeugeot\u003cbr\u003ePorsche\u003cbr\u003eRenault\u003cbr\u003eSeat\u003cbr\u003eSkoda\u003cbr\u003eSubaru\u003cbr\u003eSuzuki\u003cbr\u003eToyota\u003cbr\u003eVolvo\u003cbr\u003eVolkswagen\u003c!--split--\u003e"}

{"id":403011403803,"title":"Cusco - Front Hybrid strut brace - Toyota Estima ACR50W","handle":"cusco-front-hybrid-strut-brace-toyota-estima-acr50w-925-542-a","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 925 542 A\u003cbr\u003eBar Type: Hybrid strut brace\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eCusco Hybrid Strut Brace\u003cbr\u003e\u003cbr\u003eHybrid brace with damping material between the mounting plate and the shaft\u003cbr\u003eLightweight aluminum made of oval cross section\u003cbr\u003eTypes: Three center bar types are available, specifically set per application.\u003cbr\u003eBrackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eEstima | ACR50W | 2006-2016 | NA | 2AZ-FE | I4\u003c!--split--\u003e","published_at":"2017-12-04T22:09:42+08:00","created_at":"2017-12-04T22:09:42+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["2-points","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","aluminium","bars-and-braces","cusco-japan","cusco-japan30","estima-acr50w-2006-2016-na-2az-fe-i4","front","jp1","strut-bars","toyota","ws124"],"price":14380,"price_min":14380,"price_max":14380,"available":true,"price_varies":false,"compare_at_price":17700,"compare_at_price_min":17700,"compare_at_price_max":17700,"compare_at_price_varies":false,"variants":[{"id":5013584117787,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"925 542 A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - Front Hybrid strut brace - Toyota Estima ACR50W","public_title":null,"options":["Default Title"],"price":14380,"weight":9000,"compare_at_price":17700,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Hybrid_strut_brace_42ee13ad-edcc-4e8d-ba85-2ac920f0281f.jpg?v=1707123088"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Hybrid_strut_brace_42ee13ad-edcc-4e8d-ba85-2ac920f0281f.jpg?v=1707123088","options":["Title"],"media":[{"alt":"Cusco - Front Hybrid strut brace - Toyota Estima ACR50W - 925 542 A","id":27149723402422,"position":1,"preview_image":{"aspect_ratio":1.499,"height":427,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Hybrid_strut_brace_42ee13ad-edcc-4e8d-ba85-2ac920f0281f.jpg?v=1707123088"},"aspect_ratio":1.499,"height":427,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Hybrid_strut_brace_42ee13ad-edcc-4e8d-ba85-2ac920f0281f.jpg?v=1707123088","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 925 542 A\u003cbr\u003eBar Type: Hybrid strut brace\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eCusco Hybrid Strut Brace\u003cbr\u003e\u003cbr\u003eHybrid brace with damping material between the mounting plate and the shaft\u003cbr\u003eLightweight aluminum made of oval cross section\u003cbr\u003eTypes: Three center bar types are available, specifically set per application.\u003cbr\u003eBrackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eEstima | ACR50W | 2006-2016 | NA | 2AZ-FE | I4\u003c!--split--\u003e"}

{"id":403011567643,"title":"Cusco - Front Hybrid strut brace - Toyota Estima ACR55W","handle":"cusco-front-hybrid-strut-brace-toyota-estima-acr55w-925-542-a","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 925 542 A\u003cbr\u003eBar Type: Hybrid strut brace\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eCusco Hybrid Strut Brace\u003cbr\u003e\u003cbr\u003eHybrid brace with damping material between the mounting plate and the shaft\u003cbr\u003eLightweight aluminum made of oval cross section\u003cbr\u003eTypes: Three center bar types are available, specifically set per application.\u003cbr\u003eBrackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eEstima | ACR55W | 2006-2016 | NA | 2AZ-FE | I4\u003c!--split--\u003e","published_at":"2017-12-04T22:09:42+08:00","created_at":"2017-12-04T22:09:42+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["2-points","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","aluminium","bars-and-braces","cusco-japan","cusco-japan30","estima-acr55w-2006-2016-na-2az-fe-i4","front","jp1","strut-bars","toyota","ws124"],"price":14380,"price_min":14380,"price_max":14380,"available":true,"price_varies":false,"compare_at_price":17700,"compare_at_price_min":17700,"compare_at_price_max":17700,"compare_at_price_varies":false,"variants":[{"id":5013584281627,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"925 542 A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - Front Hybrid strut brace - Toyota Estima ACR55W","public_title":null,"options":["Default Title"],"price":14380,"weight":9000,"compare_at_price":17700,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Hybrid_strut_brace_d731b58e-b5d0-4cae-9784-ceeab7ac455a.jpg?v=1707123082"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Hybrid_strut_brace_d731b58e-b5d0-4cae-9784-ceeab7ac455a.jpg?v=1707123082","options":["Title"],"media":[{"alt":"Cusco - Front Hybrid strut brace - Toyota Estima ACR55W - 925 542 A","id":27149723664566,"position":1,"preview_image":{"aspect_ratio":1.499,"height":427,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Hybrid_strut_brace_d731b58e-b5d0-4cae-9784-ceeab7ac455a.jpg?v=1707123082"},"aspect_ratio":1.499,"height":427,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Hybrid_strut_brace_d731b58e-b5d0-4cae-9784-ceeab7ac455a.jpg?v=1707123082","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 925 542 A\u003cbr\u003eBar Type: Hybrid strut brace\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eCusco Hybrid Strut Brace\u003cbr\u003e\u003cbr\u003eHybrid brace with damping material between the mounting plate and the shaft\u003cbr\u003eLightweight aluminum made of oval cross section\u003cbr\u003eTypes: Three center bar types are available, specifically set per application.\u003cbr\u003eBrackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eEstima | ACR55W | 2006-2016 | NA | 2AZ-FE | I4\u003c!--split--\u003e"}

{"id":403009208347,"title":"Cusco - Front Hybrid strut brace with BCS (RHD only) - Toyota 86 ZN6","handle":"cusco-front-hybrid-strut-brace-with-bcs-rhd-only-toyota-86-zn6-965-542-am","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 965 542 AM\u003cbr\u003eBar Type: Hybrid strut brace with BCS (RHD only)\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eCusco Hybrid Strut Brace\u003cbr\u003e\u003cbr\u003eHybrid brace with damping material between the mounting plate and the shaft\u003cbr\u003eLightweight aluminum made of oval cross section\u003cbr\u003eTypes: Three center bar types are available, specifically set per application.\u003cbr\u003eBrackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations.\u003cbr\u003e\u003cbr\u003e This bar includes a Brake Cylinder Stopper, designed to stablize the brake master cylinder. \u003cbr\u003e\u003cbr\u003eUpon hard braking, the sheet metal of the firewall to which the brake master cylinder is attached to, flexes immensely from hydraulic pressure and applied human pedal force. Works effectively with factory brake systems and or upgraded units. This modification will effectively result with improved brake feel and quicker pedal response.\u003cbr\u003eVarious Brake Cylinder Stoppers are also integrated with Cusco Strut Tower bars, making great performance improvements in one quick installation.\u003cbr\u003e\u003cbr\u003eBrackets: Lightweight steel and finished in the Cusco signature blue color.\u003cbr\u003eHardware: All necessary hardware is included. No fabrication, cutting or welding necessary.\u003cbr\u003eAvailability: Please check to see if there is one by selecting your vehicle from the vehicle look up menus.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for installation behind the driver's side shock tower and in front of the master brake cylinder.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e86 | ZN6 (Spec A to E) | 2012-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e","published_at":"2017-12-04T22:09:26+08:00","created_at":"2017-12-04T22:09:26+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["2-points","2012","2013","2014","2015","2016","2017","2018","86-zn6-spec-a-to-e-2012-2018-na-4u-gse-h4","aluminium","bars-and-braces","cusco-japan","cusco-japan30","front","jp1","strut-bars","toyota","ws124"],"price":18370,"price_min":18370,"price_max":18370,"available":true,"price_varies":false,"compare_at_price":22600,"compare_at_price_min":22600,"compare_at_price_max":22600,"compare_at_price_varies":false,"variants":[{"id":5013581758491,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"965 542 AM","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - Front Hybrid strut brace with BCS (RHD only) - Toyota 86 ZN6","public_title":null,"options":["Default Title"],"price":18370,"weight":9000,"compare_at_price":22600,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Hybrid_strut_brace.jpg?v=1707123778"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Hybrid_strut_brace.jpg?v=1707123778","options":["Title"],"media":[{"alt":"Cusco - Front Hybrid strut brace with BCS (RHD only) - Toyota 86 ZN6 - 965 542 AM","id":27149721075894,"position":1,"preview_image":{"aspect_ratio":1.499,"height":427,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Hybrid_strut_brace.jpg?v=1707123778"},"aspect_ratio":1.499,"height":427,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Hybrid_strut_brace.jpg?v=1707123778","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 965 542 AM\u003cbr\u003eBar Type: Hybrid strut brace with BCS (RHD only)\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eCusco Hybrid Strut Brace\u003cbr\u003e\u003cbr\u003eHybrid brace with damping material between the mounting plate and the shaft\u003cbr\u003eLightweight aluminum made of oval cross section\u003cbr\u003eTypes: Three center bar types are available, specifically set per application.\u003cbr\u003eBrackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations.\u003cbr\u003e\u003cbr\u003e This bar includes a Brake Cylinder Stopper, designed to stablize the brake master cylinder. \u003cbr\u003e\u003cbr\u003eUpon hard braking, the sheet metal of the firewall to which the brake master cylinder is attached to, flexes immensely from hydraulic pressure and applied human pedal force. Works effectively with factory brake systems and or upgraded units. This modification will effectively result with improved brake feel and quicker pedal response.\u003cbr\u003eVarious Brake Cylinder Stoppers are also integrated with Cusco Strut Tower bars, making great performance improvements in one quick installation.\u003cbr\u003e\u003cbr\u003eBrackets: Lightweight steel and finished in the Cusco signature blue color.\u003cbr\u003eHardware: All necessary hardware is included. No fabrication, cutting or welding necessary.\u003cbr\u003eAvailability: Please check to see if there is one by selecting your vehicle from the vehicle look up menus.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for installation behind the driver's side shock tower and in front of the master brake cylinder.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e86 | ZN6 (Spec A to E) | 2012-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e"}

{"id":403010125851,"title":"Cusco - Front Hybrid strut brace with BCS (RHD only) - Toyota Altezza SXE10","handle":"cusco-front-hybrid-strut-brace-with-bcs-rhd-only-toyota-altezza-sxe10-195-540-am","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 195 540 AM\u003cbr\u003eBar Type: Hybrid strut brace with BCS (RHD only)\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eCusco Hybrid Strut Brace\u003cbr\u003e\u003cbr\u003eHybrid brace with damping material between the mounting plate and the shaft\u003cbr\u003eLightweight aluminum made of oval cross section\u003cbr\u003eTypes: Three center bar types are available, specifically set per application.\u003cbr\u003eBrackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations.\u003cbr\u003e\u003cbr\u003e This bar includes a Brake Cylinder Stopper, designed to stablize the brake master cylinder. \u003cbr\u003e\u003cbr\u003eUpon hard braking, the sheet metal of the firewall to which the brake master cylinder is attached to, flexes immensely from hydraulic pressure and applied human pedal force. Works effectively with factory brake systems and or upgraded units. This modification will effectively result with improved brake feel and quicker pedal response.\u003cbr\u003eVarious Brake Cylinder Stoppers are also integrated with Cusco Strut Tower bars, making great performance improvements in one quick installation.\u003cbr\u003e\u003cbr\u003eBrackets: Lightweight steel and finished in the Cusco signature blue color.\u003cbr\u003eHardware: All necessary hardware is included. No fabrication, cutting or welding necessary.\u003cbr\u003eAvailability: Please check to see if there is one by selecting your vehicle from the vehicle look up menus.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for installation behind the driver's side shock tower and in front of the master brake cylinder.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eAltezza | SXE10 Zenki | 1998-2001 | NA | 3S-GE | I4\u003cbr\u003eAltezza | SXE10 Kouki | 2001-2005 | NA | 3S-GE | I4\u003c!--split--\u003e","published_at":"2017-12-04T22:09:35+08:00","created_at":"2017-12-04T22:09:35+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["1998","1999","2-points","2000","2001","2002","2003","2004","2005","altezza-sxe10-kouki-2001-2005-na-3s-ge-i4","altezza-sxe10-zenki-1998-2001-na-3s-ge-i4","aluminium","bars-and-braces","cusco-japan","cusco-japan30","front","jp1","strut-bars","toyota","ws123"],"price":15970,"price_min":15970,"price_max":15970,"available":true,"price_varies":false,"compare_at_price":19600,"compare_at_price_min":19600,"compare_at_price_max":19600,"compare_at_price_varies":false,"variants":[{"id":5013582708763,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"195 540 AM","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - Front Hybrid strut brace with BCS (RHD only) - Toyota Altezza SXE10","public_title":null,"options":["Default Title"],"price":15970,"weight":9000,"compare_at_price":19600,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Hybrid_strut_brace_ea6fbaa7-38e2-48f5-8b45-30f3eb439526.jpg?v=1707123323"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Hybrid_strut_brace_ea6fbaa7-38e2-48f5-8b45-30f3eb439526.jpg?v=1707123323","options":["Title"],"media":[{"alt":"Cusco - Front Hybrid strut brace with BCS (RHD only) - Toyota Altezza SXE10 - 195 540 AM","id":27149722517686,"position":1,"preview_image":{"aspect_ratio":1.499,"height":427,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Hybrid_strut_brace_ea6fbaa7-38e2-48f5-8b45-30f3eb439526.jpg?v=1707123323"},"aspect_ratio":1.499,"height":427,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Hybrid_strut_brace_ea6fbaa7-38e2-48f5-8b45-30f3eb439526.jpg?v=1707123323","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 195 540 AM\u003cbr\u003eBar Type: Hybrid strut brace with BCS (RHD only)\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eCusco Hybrid Strut Brace\u003cbr\u003e\u003cbr\u003eHybrid brace with damping material between the mounting plate and the shaft\u003cbr\u003eLightweight aluminum made of oval cross section\u003cbr\u003eTypes: Three center bar types are available, specifically set per application.\u003cbr\u003eBrackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations.\u003cbr\u003e\u003cbr\u003e This bar includes a Brake Cylinder Stopper, designed to stablize the brake master cylinder. \u003cbr\u003e\u003cbr\u003eUpon hard braking, the sheet metal of the firewall to which the brake master cylinder is attached to, flexes immensely from hydraulic pressure and applied human pedal force. Works effectively with factory brake systems and or upgraded units. This modification will effectively result with improved brake feel and quicker pedal response.\u003cbr\u003eVarious Brake Cylinder Stoppers are also integrated with Cusco Strut Tower bars, making great performance improvements in one quick installation.\u003cbr\u003e\u003cbr\u003eBrackets: Lightweight steel and finished in the Cusco signature blue color.\u003cbr\u003eHardware: All necessary hardware is included. No fabrication, cutting or welding necessary.\u003cbr\u003eAvailability: Please check to see if there is one by selecting your vehicle from the vehicle look up menus.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for installation behind the driver's side shock tower and in front of the master brake cylinder.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eAltezza | SXE10 Zenki | 1998-2001 | NA | 3S-GE | I4\u003cbr\u003eAltezza | SXE10 Kouki | 2001-2005 | NA | 3S-GE | I4\u003c!--split--\u003e"}

{"id":402998132763,"title":"Cusco - Front Strut brace type ALC OS - Toyota 86 ZN6","handle":"cusco-front-strut-brace-type-alc-os-toyota-86-zn6-965-535-am","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 965 535 AM\u003cbr\u003eBar Type: Strut brace type ALC OS\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Carbon,Aluminium\u003cbr\u003e\u003cbr\u003eCusco Strut Tower Bars Type-OS Aluminum Carbon\u003cbr\u003e\u003cbr\u003eCenter Bar: Made from aluminum and real carbon fiber wrap. The inside of the piping is designed for the perfect balance between light weight characteristics and strength.\u003cbr\u003eBrackets: The end plate brackets provide flawless fitment per vehicle application and is finished in titanium gray coloring.\u003cbr\u003ePlates: Titanium gray color. To highlight the carbon fiber, the plates are finished in titanium gray, giving you the sporty or race look in your engine bay or trunk.\u003cbr\u003eTypes: Two center bar types are available, specifically set per application.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e86 | ZN6 (Spec A to E) | 2012-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e","published_at":"2017-12-04T22:07:22+08:00","created_at":"2017-12-04T22:07:23+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["2-points","2012","2013","2014","2015","2016","2017","2018","86-zn6-spec-a-to-e-2012-2018-na-4u-gse-h4","aluminium","bars-and-braces","carbon","cusco-japan","cusco-japan30","front","jp1","strut-bars","toyota","ws124"],"price":18370,"price_min":18370,"price_max":18370,"available":true,"price_varies":false,"compare_at_price":22600,"compare_at_price_min":22600,"compare_at_price_max":22600,"compare_at_price_varies":false,"variants":[{"id":5013568159771,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"965 535 AM","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - Front Strut brace type ALC OS - Toyota 86 ZN6","public_title":null,"options":["Default Title"],"price":18370,"weight":9000,"compare_at_price":22600,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Type_ALC_OS_1452cc14-b914-47c2-8f20-e7a0906f5ca0.jpg?v=1710147045"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Type_ALC_OS_1452cc14-b914-47c2-8f20-e7a0906f5ca0.jpg?v=1710147045","options":["Title"],"media":[{"alt":"Cusco - Front Strut brace type ALC OS - Toyota 86 ZN6 - 965 535 AM","id":27149699416246,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Type_ALC_OS_1452cc14-b914-47c2-8f20-e7a0906f5ca0.jpg?v=1710147045"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Type_ALC_OS_1452cc14-b914-47c2-8f20-e7a0906f5ca0.jpg?v=1710147045","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 965 535 AM\u003cbr\u003eBar Type: Strut brace type ALC OS\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Carbon,Aluminium\u003cbr\u003e\u003cbr\u003eCusco Strut Tower Bars Type-OS Aluminum Carbon\u003cbr\u003e\u003cbr\u003eCenter Bar: Made from aluminum and real carbon fiber wrap. The inside of the piping is designed for the perfect balance between light weight characteristics and strength.\u003cbr\u003eBrackets: The end plate brackets provide flawless fitment per vehicle application and is finished in titanium gray coloring.\u003cbr\u003ePlates: Titanium gray color. To highlight the carbon fiber, the plates are finished in titanium gray, giving you the sporty or race look in your engine bay or trunk.\u003cbr\u003eTypes: Two center bar types are available, specifically set per application.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e86 | ZN6 (Spec A to E) | 2012-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e"}

{"id":403010650139,"title":"Cusco - Front Strut brace Type CB - Toyota Chaser JZX100","handle":"cusco-front-strut-brace-type-cb-toyota-chaser-jzx100-175-535-an","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 175 535 AN\u003cbr\u003eBar Type: Strut brace Type CB\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Carbon,Aluminium\u003cbr\u003e\u003cbr\u003eThe Cusco Strut Brace Type CB is a super strong and rigid strut brace comprising of a 40mm carbon fibre pipe. Brackets are made in titanium or aluminium and coated in titanium colour. High precision maching allows a precise fit for parts made in titanium and aluminium.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eChaser | JZX100 (1JZ-GE) | 1996-2000 | NA | 1JZ-GE | I6\u003cbr\u003eChaser | JZX100 (1JZ-GTE) | 1996-2000 | TT | 1JZ-GTE | I6\u003c!--split--\u003e","published_at":"2017-12-04T22:09:39+08:00","created_at":"2017-12-04T22:09:39+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["1996","1997","1998","1999","2-points","2000","aluminium","bars-and-braces","carbon","chaser-jzx100-1jz-ge-1996-2000-na-1jz-ge-i6","chaser-jzx100-1jz-gte-1996-2000-tt-1jz-gte-i6","cusco-japan","cusco-japan30","front","jp1","strut-bars","toyota","ws124"],"price":18370,"price_min":18370,"price_max":18370,"available":true,"price_varies":false,"compare_at_price":22600,"compare_at_price_min":22600,"compare_at_price_max":22600,"compare_at_price_varies":false,"variants":[{"id":5013583265819,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"175 535 AN","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - Front Strut brace Type CB - Toyota Chaser JZX100","public_title":null,"options":["Default Title"],"price":18370,"weight":9000,"compare_at_price":22600,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Type_CB_1d27ddfa-ece0-403d-976e-69fb4e298e8d.jpg?v=1710147206"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Type_CB_1d27ddfa-ece0-403d-976e-69fb4e298e8d.jpg?v=1710147206","options":["Title"],"media":[{"alt":"Cusco - Front Strut brace Type CB - Toyota Chaser JZX100 - 175 535 AN","id":27149723205814,"position":1,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Type_CB_1d27ddfa-ece0-403d-976e-69fb4e298e8d.jpg?v=1710147206"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Type_CB_1d27ddfa-ece0-403d-976e-69fb4e298e8d.jpg?v=1710147206","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 175 535 AN\u003cbr\u003eBar Type: Strut brace Type CB\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Carbon,Aluminium\u003cbr\u003e\u003cbr\u003eThe Cusco Strut Brace Type CB is a super strong and rigid strut brace comprising of a 40mm carbon fibre pipe. Brackets are made in titanium or aluminium and coated in titanium colour. High precision maching allows a precise fit for parts made in titanium and aluminium.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eChaser | JZX100 (1JZ-GE) | 1996-2000 | NA | 1JZ-GE | I6\u003cbr\u003eChaser | JZX100 (1JZ-GTE) | 1996-2000 | TT | 1JZ-GTE | I6\u003c!--split--\u003e"}

{"id":403010519067,"title":"Cusco - Front Strut brace Type CB - Toyota Cresta JZX100","handle":"cusco-front-strut-brace-type-cb-toyota-cresta-jzx100-175-535-an","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 175 535 AN\u003cbr\u003eBar Type: Strut brace Type CB\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Carbon,Aluminium\u003cbr\u003e\u003cbr\u003eThe Cusco Strut Brace Type CB is a super strong and rigid strut brace comprising of a 40mm carbon fibre pipe. Brackets are made in titanium or aluminium and coated in titanium colour. High precision maching allows a precise fit for parts made in titanium and aluminium.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCresta | JZX100 (1JZ-GE) | 1996-2000 | NA | 1JZ-GE | I6\u003cbr\u003eCresta | JZX100 (1JZ-GTE) | 1996-2000 | TT | 1JZ-GTE | I6\u003c!--split--\u003e","published_at":"2017-12-04T22:09:38+08:00","created_at":"2017-12-04T22:09:39+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["1996","1997","1998","1999","2-points","2000","aluminium","bars-and-braces","carbon","cresta-jzx100-1jz-ge-1996-2000-na-1jz-ge-i6","cresta-jzx100-1jz-gte-1996-2000-tt-1jz-gte-i6","cusco-japan","cusco-japan30","front","jp1","strut-bars","toyota","ws124"],"price":21570,"price_min":21570,"price_max":21570,"available":true,"price_varies":false,"compare_at_price":26500,"compare_at_price_min":26500,"compare_at_price_max":26500,"compare_at_price_varies":false,"variants":[{"id":5013583101979,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"175 535 AN","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - Front Strut brace Type CB - Toyota Cresta JZX100","public_title":null,"options":["Default Title"],"price":21570,"weight":9000,"compare_at_price":26500,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Type_CB_19330c5a-b6af-4ec2-a5c0-53576ac1909f.jpg?v=1710147199"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Type_CB_19330c5a-b6af-4ec2-a5c0-53576ac1909f.jpg?v=1710147199","options":["Title"],"media":[{"alt":"Cusco - Front Strut brace Type CB - Toyota Cresta JZX100 - 175 535 AN","id":27149723009206,"position":1,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Type_CB_19330c5a-b6af-4ec2-a5c0-53576ac1909f.jpg?v=1710147199"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Type_CB_19330c5a-b6af-4ec2-a5c0-53576ac1909f.jpg?v=1710147199","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 175 535 AN\u003cbr\u003eBar Type: Strut brace Type CB\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Carbon,Aluminium\u003cbr\u003e\u003cbr\u003eThe Cusco Strut Brace Type CB is a super strong and rigid strut brace comprising of a 40mm carbon fibre pipe. Brackets are made in titanium or aluminium and coated in titanium colour. High precision maching allows a precise fit for parts made in titanium and aluminium.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eCresta | JZX100 (1JZ-GE) | 1996-2000 | NA | 1JZ-GE | I6\u003cbr\u003eCresta | JZX100 (1JZ-GTE) | 1996-2000 | TT | 1JZ-GTE | I6\u003c!--split--\u003e"}

{"id":403010584603,"title":"Cusco - Front Strut brace Type CB - Toyota Mark II JZX100","handle":"cusco-front-strut-brace-type-cb-toyota-mark-ii-jzx100-175-535-an","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 175 535 AN\u003cbr\u003eBar Type: Strut brace Type CB\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Carbon,Aluminium\u003cbr\u003e\u003cbr\u003eThe Cusco Strut Brace Type CB is a super strong and rigid strut brace comprising of a 40mm carbon fibre pipe. Brackets are made in titanium or aluminium and coated in titanium colour. High precision maching allows a precise fit for parts made in titanium and aluminium.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMark II | JZX100 (1JZ-GE) | 1996-2000 | NA | 1JZ-GE | I6\u003cbr\u003eMark II | JZX100 (1JZ-GTE) | 1996-2000 | TT | 1JZ-GTE | I6\u003c!--split--\u003e","published_at":"2017-12-04T22:09:39+08:00","created_at":"2017-12-04T22:09:39+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["1996","1997","1998","1999","2-points","2000","aluminium","bars-and-braces","carbon","cusco-japan","cusco-japan30","front","jp1","mark-ii-jzx100-1jz-ge-1996-2000-na-1jz-ge-i6","mark-ii-jzx100-1jz-gte-1996-2000-tt-1jz-gte-i6","strut-bars","toyota","ws124"],"price":18370,"price_min":18370,"price_max":18370,"available":true,"price_varies":false,"compare_at_price":22600,"compare_at_price_min":22600,"compare_at_price_max":22600,"compare_at_price_varies":false,"variants":[{"id":5013583167515,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"175 535 AN","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - Front Strut brace Type CB - Toyota Mark II JZX100","public_title":null,"options":["Default Title"],"price":18370,"weight":9000,"compare_at_price":22600,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Type_CB_6ed4dc05-26b9-487a-aa7b-c371973d66e3.jpg?v=1710147206"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Type_CB_6ed4dc05-26b9-487a-aa7b-c371973d66e3.jpg?v=1710147206","options":["Title"],"media":[{"alt":"Cusco - Front Strut brace Type CB - Toyota Mark II JZX100 - 175 535 AN","id":27149723173046,"position":1,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Type_CB_6ed4dc05-26b9-487a-aa7b-c371973d66e3.jpg?v=1710147206"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Type_CB_6ed4dc05-26b9-487a-aa7b-c371973d66e3.jpg?v=1710147206","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 175 535 AN\u003cbr\u003eBar Type: Strut brace Type CB\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Carbon,Aluminium\u003cbr\u003e\u003cbr\u003eThe Cusco Strut Brace Type CB is a super strong and rigid strut brace comprising of a 40mm carbon fibre pipe. Brackets are made in titanium or aluminium and coated in titanium colour. High precision maching allows a precise fit for parts made in titanium and aluminium.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eMark II | JZX100 (1JZ-GE) | 1996-2000 | NA | 1JZ-GE | I6\u003cbr\u003eMark II | JZX100 (1JZ-GTE) | 1996-2000 | TT | 1JZ-GTE | I6\u003c!--split--\u003e"}

{"id":402997903387,"title":"Cusco - Front Strut brace type OS - Toyota 86 ZN6","handle":"cusco-front-strut-brace-type-os-toyota-86-zn6-965-540-a","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 965 540 A\u003cbr\u003eBar Type: Strut brace type OS\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eCusco Strut Tower Bars Type OS, Oval Shaft design\u003cbr\u003e\u003cbr\u003eCenter Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect balance between light weight characteristics and strength.\u003cbr\u003eBrackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application.\u003cbr\u003eTypes: Three center bar types are available, specifically set per application.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations. Important: We recommend purchasing Cusco Strut Bar Quick Release Kits ( Type OS) reference 00B 540 C.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e86 | ZN6 (Spec A to E) | 2012-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e","published_at":"2017-12-04T22:07:20+08:00","created_at":"2017-12-04T22:07:20+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["2-points","2012","2013","2014","2015","2016","2017","2018","86-zn6-spec-a-to-e-2012-2018-na-4u-gse-h4","aluminium","bars-and-braces","cusco-japan","cusco-japan30","front","jp1","strut-bars","toyota","ws123"],"price":11980,"price_min":11980,"price_max":11980,"available":true,"price_varies":false,"compare_at_price":14700,"compare_at_price_min":14700,"compare_at_price_max":14700,"compare_at_price_varies":false,"variants":[{"id":5013567930395,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"965 540 A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - Front Strut brace type OS - Toyota 86 ZN6","public_title":null,"options":["Default Title"],"price":11980,"weight":9000,"compare_at_price":14700,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Type_OS_1ba856d0-b244-4731-9673-f23cb3eb94fa.jpg?v=1707128488"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Type_OS_1ba856d0-b244-4731-9673-f23cb3eb94fa.jpg?v=1707128488","options":["Title"],"media":[{"alt":"Cusco - Front Strut brace type OS - Toyota 86 ZN6 - 965 540 A","id":27149699186870,"position":1,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Type_OS_1ba856d0-b244-4731-9673-f23cb3eb94fa.jpg?v=1707128488"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/Cusco_Type_OS_1ba856d0-b244-4731-9673-f23cb3eb94fa.jpg?v=1707128488","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 965 540 A\u003cbr\u003eBar Type: Strut brace type OS\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eCusco Strut Tower Bars Type OS, Oval Shaft design\u003cbr\u003e\u003cbr\u003eCenter Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect balance between light weight characteristics and strength.\u003cbr\u003eBrackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application.\u003cbr\u003eTypes: Three center bar types are available, specifically set per application.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations. Important: We recommend purchasing Cusco Strut Bar Quick Release Kits ( Type OS) reference 00B 540 C.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003e86 | ZN6 (Spec A to E) | 2012-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e"}