{"id":561990926363,"title":"Mishimoto - Mazda RX8 Oil Line Kit - SE3P - MMSBH-RX8-04K","handle":"mishimoto-mazda-rx8-oil-line-kit-se3p-mmsbh-rx8-04k","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMSBH-RX8-04K\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2004–2011 Mazda RX-8\u003cbr\u003ePremade braided stainless steel oil lines and aluminum fittings replace corrosion-prone stock rubber lines\u003cbr\u003eFull kit includes four braided stainless steel oil lines, M18 banjo bolts, and all the necessary fittings and oil seals for a trouble-free installation\u003cbr\u003eOil lines come prelabeled for easy identification\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Stainless Steel\u003cbr\u003eMax Recommended PSI 750psi\u003cbr\u003eMin Temp -40°F\u003cbr\u003eNote This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eMax Temp +300°F\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 13B-MSP (Renesis)\u003cbr\u003eChassis Codes SE3P\u003cbr\u003eCaution This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) 2ft, 4in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(1) 4ft, 8in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 4in Stainless Steel Braided Hose with 45 Degree and Straight -10AN Fittings\u003cbr\u003e(1) 2ft, 2in Stainless Steel Braided Hose with 90 Degree and Straight -10AN Fittings\u003cbr\u003e(4) M18 x -10AN Fittings w\/ Dowty Oil Seals\u003cbr\u003e(2) M18 x -10AN Banjo Bolts w\/ Dowty Oil Seals\u003cbr\u003e(1) 10AN – 10AN Male Connector\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mazda RX-8 has a high-winding rotary engine capable of easily reaching 9,000 RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX-8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine’s oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber oil lines and steel fittings can severely corrode and degrade over time. \u003cbr\u003e\u003cbr\u003eThis full kit from Mishimoto replaces all the RX-8 oil cooler lines with braided stainless units and aluminum fittings that will not corrode or degrade over time. This oil line kit also replaces the most frequent line to corrode, which is located on the left hand side of the car near the front suspension assembly. With Mishimoto replacement Mazda RX-8 oil cooler lines, all oil lines between the engine and both oil coolers are replaced, including the intermediate line that spans both oil coolers found in all manual transmission models. \u003cbr\u003e\u003cbr\u003eThese Mazda RX-8 oil cooler lines fit onto the vehicle with no additional modification, and d not require any cutting to your vehicle or permanent removal of parts. This oil line kit comes with all banjo bolts, M18 fittings, and a male to male -10AN connector to complete the installation. Keep your RX-8 protected and running smooth! As with all our products, these RX-8 oil cooler lines include the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2004–2011 Mazda RX-8\u003cbr\u003ePremade braided stainless steel oil lines and aluminum fittings replace corrosion-prone stock rubber lines\u003cbr\u003eFull kit includes four braided stainless steel oil lines, M18 banjo bolts, and all the necessary fittings and oil seals for a trouble-free installation\u003cbr\u003eOil lines come prelabeled for easy identification\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Stainless Steel\u003cbr\u003eMax Recommended PSI 750psi\u003cbr\u003eMin Temp -40°F\u003cbr\u003eNote This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eMax Temp +300°F\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 13B-MSP (Renesis)\u003cbr\u003eChassis Codes SE3P\u003cbr\u003eCaution This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) 2ft, 4in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(1) 4ft, 8in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 4in Stainless Steel Braided Hose with 45 Degree and Straight -10AN Fittings\u003cbr\u003e(1) 2ft, 2in Stainless Steel Braided Hose with 90 Degree and Straight -10AN Fittings\u003cbr\u003e(4) M18 x -10AN Fittings w\/ Dowty Oil Seals\u003cbr\u003e(2) M18 x -10AN Banjo Bolts w\/ Dowty Oil Seals\u003cbr\u003e(1) 10AN – 10AN Male Connector\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mazda RX-8 has a high-winding rotary engine capable of easily reaching 9,000 RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX-8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine’s oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber oil lines and steel fittings can severely corrode and degrade over time. \u003cbr\u003e\u003cbr\u003eThis full kit from Mishimoto replaces all the RX-8 oil cooler lines with braided stainless units and aluminum fittings that will not corrode or degrade over time. This oil line kit also replaces the most frequent line to corrode, which is located on the left hand side of the car near the front suspension assembly. With Mishimoto replacement Mazda RX-8 oil cooler lines, all oil lines between the engine and both oil coolers are replaced, including the intermediate line that spans both oil coolers found in all manual transmission models. \u003cbr\u003e\u003cbr\u003eThese Mazda RX-8 oil cooler lines fit onto the vehicle with no additional modification, and d not require any cutting to your vehicle or permanent removal of parts. This oil line kit comes with all banjo bolts, M18 fittings, and a male to male -10AN connector to complete the installation. Keep your RX-8 protected and running smooth! As with all our products, these RX-8 oil cooler lines include the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:25:05+08:00","created_at":"2018-01-24T23:25:05+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","car-specific","mazda","mishimoto","oil-cooler-hoses","oil-coolers","rx-8-se3p-kouki-2008-2013-na-13b-msp-r","rx-8-se3p-zenki-2003-2008-na-13b-msp-r","tva","ws124"],"price":69410,"price_min":69410,"price_max":69410,"available":true,"price_varies":false,"compare_at_price":84400,"compare_at_price_min":84400,"compare_at_price_max":84400,"compare_at_price_varies":false,"variants":[{"id":5990388203547,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMSBH-RX8-04K","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Mazda RX8 Oil Line Kit - SE3P - MMSBH-RX8-04K","public_title":null,"options":["Default Title"],"price":69410,"weight":4629,"compare_at_price":84400,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/products\/MMSBH-RX8-04K.jpg?v=1615547969"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/products\/MMSBH-RX8-04K.jpg?v=1615547969","options":["Title"],"media":[{"alt":"Mishimoto - Mazda RX8 Oil Line Kit - SE3P - MMSBH-RX8-04K - Rzcrewgarage","id":1351401504865,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/products\/MMSBH-RX8-04K.jpg?v=1615547969"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/products\/MMSBH-RX8-04K.jpg?v=1615547969","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMSBH-RX8-04K\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2004–2011 Mazda RX-8\u003cbr\u003ePremade braided stainless steel oil lines and aluminum fittings replace corrosion-prone stock rubber lines\u003cbr\u003eFull kit includes four braided stainless steel oil lines, M18 banjo bolts, and all the necessary fittings and oil seals for a trouble-free installation\u003cbr\u003eOil lines come prelabeled for easy identification\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Stainless Steel\u003cbr\u003eMax Recommended PSI 750psi\u003cbr\u003eMin Temp -40°F\u003cbr\u003eNote This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eMax Temp +300°F\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 13B-MSP (Renesis)\u003cbr\u003eChassis Codes SE3P\u003cbr\u003eCaution This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) 2ft, 4in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(1) 4ft, 8in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 4in Stainless Steel Braided Hose with 45 Degree and Straight -10AN Fittings\u003cbr\u003e(1) 2ft, 2in Stainless Steel Braided Hose with 90 Degree and Straight -10AN Fittings\u003cbr\u003e(4) M18 x -10AN Fittings w\/ Dowty Oil Seals\u003cbr\u003e(2) M18 x -10AN Banjo Bolts w\/ Dowty Oil Seals\u003cbr\u003e(1) 10AN – 10AN Male Connector\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mazda RX-8 has a high-winding rotary engine capable of easily reaching 9,000 RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX-8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine’s oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber oil lines and steel fittings can severely corrode and degrade over time. \u003cbr\u003e\u003cbr\u003eThis full kit from Mishimoto replaces all the RX-8 oil cooler lines with braided stainless units and aluminum fittings that will not corrode or degrade over time. This oil line kit also replaces the most frequent line to corrode, which is located on the left hand side of the car near the front suspension assembly. With Mishimoto replacement Mazda RX-8 oil cooler lines, all oil lines between the engine and both oil coolers are replaced, including the intermediate line that spans both oil coolers found in all manual transmission models. \u003cbr\u003e\u003cbr\u003eThese Mazda RX-8 oil cooler lines fit onto the vehicle with no additional modification, and d not require any cutting to your vehicle or permanent removal of parts. This oil line kit comes with all banjo bolts, M18 fittings, and a male to male -10AN connector to complete the installation. Keep your RX-8 protected and running smooth! As with all our products, these RX-8 oil cooler lines include the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2004–2011 Mazda RX-8\u003cbr\u003ePremade braided stainless steel oil lines and aluminum fittings replace corrosion-prone stock rubber lines\u003cbr\u003eFull kit includes four braided stainless steel oil lines, M18 banjo bolts, and all the necessary fittings and oil seals for a trouble-free installation\u003cbr\u003eOil lines come prelabeled for easy identification\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Stainless Steel\u003cbr\u003eMax Recommended PSI 750psi\u003cbr\u003eMin Temp -40°F\u003cbr\u003eNote This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eMax Temp +300°F\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 13B-MSP (Renesis)\u003cbr\u003eChassis Codes SE3P\u003cbr\u003eCaution This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) 2ft, 4in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(1) 4ft, 8in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 4in Stainless Steel Braided Hose with 45 Degree and Straight -10AN Fittings\u003cbr\u003e(1) 2ft, 2in Stainless Steel Braided Hose with 90 Degree and Straight -10AN Fittings\u003cbr\u003e(4) M18 x -10AN Fittings w\/ Dowty Oil Seals\u003cbr\u003e(2) M18 x -10AN Banjo Bolts w\/ Dowty Oil Seals\u003cbr\u003e(1) 10AN – 10AN Male Connector\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mazda RX-8 has a high-winding rotary engine capable of easily reaching 9,000 RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX-8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine’s oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber oil lines and steel fittings can severely corrode and degrade over time. \u003cbr\u003e\u003cbr\u003eThis full kit from Mishimoto replaces all the RX-8 oil cooler lines with braided stainless units and aluminum fittings that will not corrode or degrade over time. This oil line kit also replaces the most frequent line to corrode, which is located on the left hand side of the car near the front suspension assembly. With Mishimoto replacement Mazda RX-8 oil cooler lines, all oil lines between the engine and both oil coolers are replaced, including the intermediate line that spans both oil coolers found in all manual transmission models. \u003cbr\u003e\u003cbr\u003eThese Mazda RX-8 oil cooler lines fit onto the vehicle with no additional modification, and d not require any cutting to your vehicle or permanent removal of parts. This oil line kit comes with all banjo bolts, M18 fittings, and a male to male -10AN connector to complete the installation. Keep your RX-8 protected and running smooth! As with all our products, these RX-8 oil cooler lines include the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

Mishimoto - Mazda RX8 Oil Line Kit - SE3P - MMSBH-RX8-04K

Check products, lead time and fitting infos in the tabs below!
Sku: MMSBH-RX8-04K
Vendor: Mishimoto
Availability: 3 in Stock in our US Warehouse.
Shipping time is additional.
$694.10 $844.00
Maximum quantity available reached.
Specifications:
Manufacturer: Mishimoto
Part Number: MMSBH-RX8-04K

Features
Direct fit for the 2004–2011 Mazda RX-8
Premade braided stainless steel oil lines and aluminum fittings replace corrosion-prone stock rubber lines
Full kit includes four braided stainless steel oil lines, M18 banjo bolts, and all the necessary fittings and oil seals for a trouble-free installation
Oil lines come prelabeled for easy identification

Tech Specs
Material Stainless Steel
Max Recommended PSI 750psi
Min Temp -40°F
Note This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.
Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft/lbs (operating range). Do not exceed the maximum torque rating of 35 ft/lbs.
Max Temp +300°F
Fitting Size -10AN
Engine Codes 13B-MSP (Renesis)
Chassis Codes SE3P
Caution This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.
Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft/lbs (operating range). Do not exceed the maximum torque rating of 35 ft/lbs.
Purchase Includes
(1) 2ft, 4in Stainless Steel Braided Hose with 90 Degree -10AN Fittings
(1) 4ft, 8in Stainless Steel Braided Hose with 90 Degree -10AN Fittings
(1) 3ft, 4in Stainless Steel Braided Hose with 45 Degree and Straight -10AN Fittings
(1) 2ft, 2in Stainless Steel Braided Hose with 90 Degree and Straight -10AN Fittings
(4) M18 x -10AN Fittings w/ Dowty Oil Seals
(2) M18 x -10AN Banjo Bolts w/ Dowty Oil Seals
(1) 10AN – 10AN Male Connector

Description
The Mazda RX-8 has a high-winding rotary engine capable of easily reaching 9,000 RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX-8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine’s oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber oil lines and steel fittings can severely corrode and degrade over time.

This full kit from Mishimoto replaces all the RX-8 oil cooler lines with braided stainless units and aluminum fittings that will not corrode or degrade over time. This oil line kit also replaces the most frequent line to corrode, which is located on the left hand side of the car near the front suspension assembly. With Mishimoto replacement Mazda RX-8 oil cooler lines, all oil lines between the engine and both oil coolers are replaced, including the intermediate line that spans both oil coolers found in all manual transmission models.

These Mazda RX-8 oil cooler lines fit onto the vehicle with no additional modification, and d not require any cutting to your vehicle or permanent removal of parts. This oil line kit comes with all banjo bolts, M18 fittings, and a male to male -10AN connector to complete the installation. Keep your RX-8 protected and running smooth! As with all our products, these RX-8 oil cooler lines include the Mishimoto Lifetime Warranty.

Features
Direct fit for the 2004–2011 Mazda RX-8
Premade braided stainless steel oil lines and aluminum fittings replace corrosion-prone stock rubber lines
Full kit includes four braided stainless steel oil lines, M18 banjo bolts, and all the necessary fittings and oil seals for a trouble-free installation
Oil lines come prelabeled for easy identification

Tech Specs
Material Stainless Steel
Max Recommended PSI 750psi
Min Temp -40°F
Note This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.
Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft/lbs (operating range). Do not exceed the maximum torque rating of 35 ft/lbs.
Max Temp +300°F
Fitting Size -10AN
Engine Codes 13B-MSP (Renesis)
Chassis Codes SE3P
Caution This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.
Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft/lbs (operating range). Do not exceed the maximum torque rating of 35 ft/lbs.
Purchase Includes
(1) 2ft, 4in Stainless Steel Braided Hose with 90 Degree -10AN Fittings
(1) 4ft, 8in Stainless Steel Braided Hose with 90 Degree -10AN Fittings
(1) 3ft, 4in Stainless Steel Braided Hose with 45 Degree and Straight -10AN Fittings
(1) 2ft, 2in Stainless Steel Braided Hose with 90 Degree and Straight -10AN Fittings
(4) M18 x -10AN Fittings w/ Dowty Oil Seals
(2) M18 x -10AN Banjo Bolts w/ Dowty Oil Seals
(1) 10AN – 10AN Male Connector

Description
The Mazda RX-8 has a high-winding rotary engine capable of easily reaching 9,000 RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX-8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine’s oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber oil lines and steel fittings can severely corrode and degrade over time.

This full kit from Mishimoto replaces all the RX-8 oil cooler lines with braided stainless units and aluminum fittings that will not corrode or degrade over time. This oil line kit also replaces the most frequent line to corrode, which is located on the left hand side of the car near the front suspension assembly. With Mishimoto replacement Mazda RX-8 oil cooler lines, all oil lines between the engine and both oil coolers are replaced, including the intermediate line that spans both oil coolers found in all manual transmission models.

These Mazda RX-8 oil cooler lines fit onto the vehicle with no additional modification, and d not require any cutting to your vehicle or permanent removal of parts. This oil line kit comes with all banjo bolts, M18 fittings, and a male to male -10AN connector to complete the installation. Keep your RX-8 protected and running smooth! As with all our products, these RX-8 oil cooler lines include the Mishimoto Lifetime Warranty.
Taxes:

Singapore and Malaysia: All import taxes are included in our pricing.

USA: Taxes are included in this product pricing.

European Tva, Iva: Taxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.

Rest of the World: Other countries may have to pay their local import tax depending on your country's regulations.
Shipping:

This product will be shipped from our US Warehouse to any global location. Shipping via DHL/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.
Every Monday our team keeps you in the loop by sending out an "estimated time of arrival" email.

Important: Only 3 left in stock!
The RZCrew team listed this item for its performance and trusted reliability.
Reliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!

Related Products


People who bought this product, also bought