{"id":4398778318945,"title":"Snow Performance Stage 1 Boost Cooler Water-Methanol Injection Kit for Turbo applications - Nylon Lines\/Braided Lines","handle":"snow-performance-stage-1-boost-cooler-water-methanol-injection-kit-for-turbo-applications-nylon-lines-braided-lines","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Snow Performance\u003cbr\u003ePart Number: SNO-201\u003cbr\u003eRace gas quality fuel on pump gas! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 1 Boost Cooler™ water methanol injection kit is available for all forced induction applications (Supercharged\/Turbocharged) and uses a adjustable boost switch to inject a fixed amount of water methanol into the system until boost goes below the switch set point. Proven to deliver 30-70 HP increases to all forced induction applications! This makes it a good choice for low to medium boost set ups, drag race applications, and vehicles with a positive displacement supercharger (Roots\/Twinscrew) looking for an octane enhancement and cooler intake charge. Activation can also be set up through any other user chosen switch, such as a full throttle switch, nitrous switch, etc. \u003cbr\u003e\u003cbr\u003eThis kit utilizes the only OEM approved water methanol injection pump on the market with proprietary heat flange, twin seals, and custom motor winding to run cooler and longer than the competition. The Extreme Environment™ 300 PSI UHO Pump is designed to be in the elements with O-Ring connections that are then sealed and potted at our Colorado facility to ensure no moisture can enter the pump internals. Compare this to pumps that us a pump \"sleeve\". These sleeves will keep moisture around the pump unit leading to corrosion as well as trap heat to greatly decrease pump life. The Stage 1 comes standard with 100% methanol resistant components using stainless steel, nickel plating, EPDM, and hard anodizing to ensure years of continued use. Tie that in with new Snow Performance ACU-SEAL™ compression fittings for guaranteed leak free operation even when using 100% methanol. For a extremely robust, reliable water methanol injection experience that won't brake the bank look no further than the Snow Performance Stage 1 Boost Cooler™! \u003cbr\u003e\u003cbr\u003eFeatures: \u003cbr\u003eU.S.A. Made\u003cbr\u003eAdjustable Water Methanol Engagement \u0026amp; Monitoring\u003cbr\u003eRecommended For High HP, Drag Race, and Positive Displacement Supercharger Applications\u003cbr\u003eSupports 1,000+ HP\u003cbr\u003e100% Methanol Resistant (Stainless Steel, Nickel Plating, Hard Anodizing, EPDM)\u003cbr\u003eSnow Performance Hyper-Sonic™ Water Methanol Nozzle\u003cbr\u003eSnow Performance ACU-SEAL™ Water Methanol Compression Fittings\u003cbr\u003eSnow Performance OEM Approved Extreme Environment™ 300 PSI UHO Water Methanol Pump\u003cbr\u003eSnow Performance Running \"S\" Engraved Low Profile Nozzle Holder\u003cbr\u003eSnow Performance Running \"S\" Engraved Low Profile High Flow Check Valve\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eUniversal\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2019-11-30T21:31:16+08:00","created_at":"2019-11-30T21:31:19+08:00","vendor":"Snow Performance","type":"Methanol Kits","tags":["1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","methanol-kits","snow-performance","turbo-engine-kits","tva","Universal"],"price":47600,"price_min":47600,"price_max":60800,"available":true,"price_varies":true,"compare_at_price":47600,"compare_at_price_min":47600,"compare_at_price_max":60800,"compare_at_price_varies":true,"variants":[{"id":31417799606369,"title":"Nylon Lines","option1":"Nylon Lines","option2":null,"option3":null,"sku":"SNO-201","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Snow Performance Stage 1 Boost Cooler Water-Methanol Injection Kit for Turbo applications - Nylon Lines\/Braided Lines - Nylon Lines","public_title":"Nylon Lines","options":["Nylon Lines"],"price":47600,"weight":7100,"compare_at_price":47600,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null},{"id":31417799639137,"title":"Braided Lines","option1":"Braided Lines","option2":null,"option3":null,"sku":"SNO-201-BRD","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Snow Performance Stage 1 Boost Cooler Water-Methanol Injection Kit for Turbo applications - Nylon Lines\/Braided Lines - Braided Lines","public_title":"Braided Lines","options":["Braided Lines"],"price":60800,"weight":7100,"compare_at_price":60800,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/products\/SNO-201.jpg?v=1575120679","\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/products\/SNO-201-BRD.jpg?v=1575120679"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/products\/SNO-201.jpg?v=1575120679","options":["Choose Your Lines"],"media":[{"alt":"Snow Performance Stage 1 Boost Cooler Water-Methanol Injection Kit for Turbo applications - Nylon Lines\/Braided Lines - RZCrewGarage","id":5909272002657,"position":1,"preview_image":{"aspect_ratio":0.89,"height":420,"width":374,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/products\/SNO-201.jpg?v=1575120679"},"aspect_ratio":0.89,"height":420,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/products\/SNO-201.jpg?v=1575120679","width":374},{"alt":"Snow Performance Stage 1 Boost Cooler Water-Methanol Injection Kit for Turbo applications - Nylon Lines\/Braided Lines - RZCrewGarage","id":5909272035425,"position":2,"preview_image":{"aspect_ratio":1.123,"height":374,"width":420,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/products\/SNO-201-BRD.jpg?v=1575120679"},"aspect_ratio":1.123,"height":374,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2343\/5009\/products\/SNO-201-BRD.jpg?v=1575120679","width":420}],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Snow Performance\u003cbr\u003ePart Number: SNO-201\u003cbr\u003eRace gas quality fuel on pump gas! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 1 Boost Cooler™ water methanol injection kit is available for all forced induction applications (Supercharged\/Turbocharged) and uses a adjustable boost switch to inject a fixed amount of water methanol into the system until boost goes below the switch set point. Proven to deliver 30-70 HP increases to all forced induction applications! This makes it a good choice for low to medium boost set ups, drag race applications, and vehicles with a positive displacement supercharger (Roots\/Twinscrew) looking for an octane enhancement and cooler intake charge. Activation can also be set up through any other user chosen switch, such as a full throttle switch, nitrous switch, etc. \u003cbr\u003e\u003cbr\u003eThis kit utilizes the only OEM approved water methanol injection pump on the market with proprietary heat flange, twin seals, and custom motor winding to run cooler and longer than the competition. The Extreme Environment™ 300 PSI UHO Pump is designed to be in the elements with O-Ring connections that are then sealed and potted at our Colorado facility to ensure no moisture can enter the pump internals. Compare this to pumps that us a pump \"sleeve\". These sleeves will keep moisture around the pump unit leading to corrosion as well as trap heat to greatly decrease pump life. The Stage 1 comes standard with 100% methanol resistant components using stainless steel, nickel plating, EPDM, and hard anodizing to ensure years of continued use. Tie that in with new Snow Performance ACU-SEAL™ compression fittings for guaranteed leak free operation even when using 100% methanol. For a extremely robust, reliable water methanol injection experience that won't brake the bank look no further than the Snow Performance Stage 1 Boost Cooler™! \u003cbr\u003e\u003cbr\u003eFeatures: \u003cbr\u003eU.S.A. Made\u003cbr\u003eAdjustable Water Methanol Engagement \u0026amp; Monitoring\u003cbr\u003eRecommended For High HP, Drag Race, and Positive Displacement Supercharger Applications\u003cbr\u003eSupports 1,000+ HP\u003cbr\u003e100% Methanol Resistant (Stainless Steel, Nickel Plating, Hard Anodizing, EPDM)\u003cbr\u003eSnow Performance Hyper-Sonic™ Water Methanol Nozzle\u003cbr\u003eSnow Performance ACU-SEAL™ Water Methanol Compression Fittings\u003cbr\u003eSnow Performance OEM Approved Extreme Environment™ 300 PSI UHO Water Methanol Pump\u003cbr\u003eSnow Performance Running \"S\" Engraved Low Profile Nozzle Holder\u003cbr\u003eSnow Performance Running \"S\" Engraved Low Profile High Flow Check Valve\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eUniversal\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

Snow Performance Stage 1 Boost Cooler Water-Methanol Injection Kit for Turbo applications - Nylon Lines/Braided Lines

Check products, lead time and fitting infos in the tabs below!
Sku: SNO-201
Availability: Usually ships within 10 to 20 days.
Shipping time is additional. Choose your option in the cart page.
$476.00
Maximum quantity available reached.
Specifications:
Manufacturer: Snow Performance
Part Number: SNO-201
Race gas quality fuel on pump gas! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 1 Boost Cooler™ water methanol injection kit is available for all forced induction applications (Supercharged/Turbocharged) and uses a adjustable boost switch to inject a fixed amount of water methanol into the system until boost goes below the switch set point. Proven to deliver 30-70 HP increases to all forced induction applications! This makes it a good choice for low to medium boost set ups, drag race applications, and vehicles with a positive displacement supercharger (Roots/Twinscrew) looking for an octane enhancement and cooler intake charge. Activation can also be set up through any other user chosen switch, such as a full throttle switch, nitrous switch, etc.

This kit utilizes the only OEM approved water methanol injection pump on the market with proprietary heat flange, twin seals, and custom motor winding to run cooler and longer than the competition. The Extreme Environment™ 300 PSI UHO Pump is designed to be in the elements with O-Ring connections that are then sealed and potted at our Colorado facility to ensure no moisture can enter the pump internals. Compare this to pumps that us a pump "sleeve". These sleeves will keep moisture around the pump unit leading to corrosion as well as trap heat to greatly decrease pump life. The Stage 1 comes standard with 100% methanol resistant components using stainless steel, nickel plating, EPDM, and hard anodizing to ensure years of continued use. Tie that in with new Snow Performance ACU-SEAL™ compression fittings for guaranteed leak free operation even when using 100% methanol. For a extremely robust, reliable water methanol injection experience that won't brake the bank look no further than the Snow Performance Stage 1 Boost Cooler™!

Features:
U.S.A. Made
Adjustable Water Methanol Engagement & Monitoring
Recommended For High HP, Drag Race, and Positive Displacement Supercharger Applications
Supports 1,000+ HP
100% Methanol Resistant (Stainless Steel, Nickel Plating, Hard Anodizing, EPDM)
Snow Performance Hyper-Sonic™ Water Methanol Nozzle
Snow Performance ACU-SEAL™ Water Methanol Compression Fittings
Snow Performance OEM Approved Extreme Environment™ 300 PSI UHO Water Methanol Pump
Snow Performance Running "S" Engraved Low Profile Nozzle Holder
Snow Performance Running "S" Engraved Low Profile High Flow Check Valve
Taxes:

Singapore and Malaysia: All import taxes are included in our pricing.

USA: Taxes are included in this product pricing.

European Tva, Iva: Taxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.

Rest of the World: Other countries may have to pay their local import tax depending on your country's regulations.
Shipping:

This product will be shipped from our US Warehouse to any global location. Shipping via DHL/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.
Every Monday our team keeps you in the loop by sending out an "estimated time of arrival" email.
Universal
The RZCrew team listed this item for its performance and trusted reliability.
Reliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!

People who bought this product, also bought