2009

{"id":561986076699,"title":"Mishimoto - Honda S2000 Oil Cooler Kit - AP1 AP2 - MMOC-S2K-00","handle":"mishimoto-honda-s2000-oil-cooler-kit-ap1-ap2-mmoc-s2k-00","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-S2K-00\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDramatic temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Honda S2000\u003cbr\u003eThermostatic option available\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote AP1 S2000 (2000–2003) vehicles will require minor bending of A\/C lines for cooler and bracket installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes F20C, F22C\u003cbr\u003eChassis Codes AP1 ,AP2\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets (Including Horn Relocation Bracket)\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 8in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system. Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000. This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability. It includes preassembled stainless steel lines and S2000 specific mounting brackets for a painless and clean installation. The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDramatic temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Honda S2000\u003cbr\u003eThermostatic option available\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote AP1 S2000 (2000–2003) vehicles will require minor bending of A\/C lines for cooler and bracket installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes F20C, F22C\u003cbr\u003eChassis Codes AP1 ,AP2\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets (Including Horn Relocation Bracket)\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 8in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system. Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000. This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability. It includes preassembled stainless steel lines and S2000 specific mounting brackets for a painless and clean installation. The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 4 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:03+08:00","created_at":"2018-01-24T23:24:04+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","672x27.3y1z0","car-specific","cooling","CTOT14","honda","mishimoto","oil-cooler-kits","oil-coolers","s2000-ap1-1999-2003-na-f20c-i4","s2000-ap2-2003-2009-na-f22c-i4","US1","ws112"],"price":81561,"price_min":81561,"price_max":81561,"available":true,"price_varies":false,"compare_at_price":87700,"compare_at_price_min":87700,"compare_at_price_max":87700,"compare_at_price_varies":false,"variants":[{"id":5990381813787,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-S2K-00","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Honda S2000 Oil Cooler Kit - AP1 AP2 - MMOC-S2K-00","public_title":null,"options":["Default Title"],"price":81561,"weight":8899,"compare_at_price":87700,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-S2K-00.jpg?v=1710154068"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-S2K-00.jpg?v=1710154068","options":["Title"],"media":[{"alt":"Mishimoto - Honda S2000 Oil Cooler Kit - AP1 AP2 - MMOC-S2K-00 - Rzcrewgarage","id":1351399309409,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-S2K-00.jpg?v=1710154068"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-S2K-00.jpg?v=1710154068","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-S2K-00\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDramatic temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Honda S2000\u003cbr\u003eThermostatic option available\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote AP1 S2000 (2000–2003) vehicles will require minor bending of A\/C lines for cooler and bracket installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes F20C, F22C\u003cbr\u003eChassis Codes AP1 ,AP2\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets (Including Horn Relocation Bracket)\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 8in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system. Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000. This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability. It includes preassembled stainless steel lines and S2000 specific mounting brackets for a painless and clean installation. The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDramatic temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Honda S2000\u003cbr\u003eThermostatic option available\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote AP1 S2000 (2000–2003) vehicles will require minor bending of A\/C lines for cooler and bracket installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes F20C, F22C\u003cbr\u003eChassis Codes AP1 ,AP2\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets (Including Horn Relocation Bracket)\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 8in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system. Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000. This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability. It includes preassembled stainless steel lines and S2000 specific mounting brackets for a painless and clean installation. The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 4 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561986109467,"title":"Mishimoto - Honda S2000 Oil Cooler Kit, Black - Black - AP1 AP2 - MMOC-S2K-00BK","handle":"mishimoto-honda-s2000-oil-cooler-kit-black-black-ap1-ap2-mmoc-s2k-00bk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-S2K-00BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDramatic temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Honda S2000\u003cbr\u003eThermostatic option available\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote AP1 S2000 (2000–2003) vehicles will require minor bending of A\/C lines for cooler and bracket installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes F20C, F22C\u003cbr\u003eChassis Codes AP1 ,AP2\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets (Including Horn Relocation Bracket)\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 8in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system. Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000. This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability. It includes preassembled stainless steel lines and S2000 specific mounting brackets for a painless and clean installation. The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDramatic temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Honda S2000\u003cbr\u003eThermostatic option available\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote AP1 S2000 (2000–2003) vehicles will require minor bending of A\/C lines for cooler and bracket installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes F20C, F22C\u003cbr\u003eChassis Codes AP1 ,AP2\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets (Including Horn Relocation Bracket)\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 8in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system. Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000. This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability. It includes preassembled stainless steel lines and S2000 specific mounting brackets for a painless and clean installation. The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2025-04-14T11:29:11+08:00","created_at":"2018-01-24T23:24:05+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","672x27.3y1z0","car-specific","cooling","CTOT14","honda","mishimoto","oil-cooler-kits","oil-coolers","s2000-ap1-1999-2003-na-f20c-i4","s2000-ap2-2003-2009-na-f22c-i4","US1","ws112"],"price":81561,"price_min":81561,"price_max":81561,"available":true,"price_varies":false,"compare_at_price":87700,"compare_at_price_min":87700,"compare_at_price_max":87700,"compare_at_price_varies":false,"variants":[{"id":5990382764059,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-S2K-00BK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Honda S2000 Oil Cooler Kit, Black - Black - AP1 AP2 - MMOC-S2K-00BK","public_title":null,"options":["Default Title"],"price":81561,"weight":8944,"compare_at_price":87700,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-S2K-00BK.jpg?v=1710154068"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-S2K-00BK.jpg?v=1710154068","options":["Title"],"media":[{"alt":"Mishimoto - Honda S2000 Oil Cooler Kit, Black - Black - AP1 AP2 - MMOC-S2K-00BK - Rzcrewgarage","id":1351399342177,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-S2K-00BK.jpg?v=1710154068"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-S2K-00BK.jpg?v=1710154068","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-S2K-00BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDramatic temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Honda S2000\u003cbr\u003eThermostatic option available\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote AP1 S2000 (2000–2003) vehicles will require minor bending of A\/C lines for cooler and bracket installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes F20C, F22C\u003cbr\u003eChassis Codes AP1 ,AP2\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets (Including Horn Relocation Bracket)\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 8in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system. Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000. This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability. It includes preassembled stainless steel lines and S2000 specific mounting brackets for a painless and clean installation. The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDramatic temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Honda S2000\u003cbr\u003eThermostatic option available\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote AP1 S2000 (2000–2003) vehicles will require minor bending of A\/C lines for cooler and bracket installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes F20C, F22C\u003cbr\u003eChassis Codes AP1 ,AP2\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets (Including Horn Relocation Bracket)\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 8in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system. Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000. This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability. It includes preassembled stainless steel lines and S2000 specific mounting brackets for a painless and clean installation. The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561986142235,"title":"Mishimoto - Honda S2000 Thermostatic Oil Cooler Kit - AP1 AP2 - MMOC-S2K-00T","handle":"mishimoto-honda-s2000-thermostatic-oil-cooler-kit-ap1-ap2-mmoc-s2k-00t","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-S2K-00T\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDramatic temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Honda S2000\u003cbr\u003eThermostatic option available\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote AP1 S2000 (2000–2003) vehicles will require minor bending of A\/C lines for cooler and bracket installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes F20C, F22C\u003cbr\u003eChassis Codes AP1 ,AP2\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets (Including Horn Relocation Bracket)\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 8in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system. Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000. This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability. It includes preassembled stainless steel lines and S2000 specific mounting brackets for a painless and clean installation. The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDramatic temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Honda S2000\u003cbr\u003eThermostatic option available\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote AP1 S2000 (2000–2003) vehicles will require minor bending of A\/C lines for cooler and bracket installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes F20C, F22C\u003cbr\u003eChassis Codes AP1 ,AP2\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets (Including Horn Relocation Bracket)\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 8in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system. Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000. This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability. It includes preassembled stainless steel lines and S2000 specific mounting brackets for a painless and clean installation. The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:05+08:00","created_at":"2018-01-24T23:24:06+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","755x27.3y1z0","car-specific","cooling","CTOT14","honda","mishimoto","oil-cooler-kits","oil-coolers","s2000-ap1-1999-2003-na-f20c-i4","s2000-ap2-2003-2009-na-f22c-i4","US1","ws112"],"price":91698,"price_min":91698,"price_max":91698,"available":true,"price_varies":false,"compare_at_price":98600,"compare_at_price_min":98600,"compare_at_price_max":98600,"compare_at_price_varies":false,"variants":[{"id":5990382796827,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-S2K-00T","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Honda S2000 Thermostatic Oil Cooler Kit - AP1 AP2 - MMOC-S2K-00T","public_title":null,"options":["Default Title"],"price":91698,"weight":8990,"compare_at_price":98600,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-S2K-00T.jpg?v=1710154068"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-S2K-00T.jpg?v=1710154068","options":["Title"],"media":[{"alt":"Mishimoto - Honda S2000 Thermostatic Oil Cooler Kit - AP1 AP2 - MMOC-S2K-00T - Rzcrewgarage","id":1351399374945,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-S2K-00T.jpg?v=1710154068"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-S2K-00T.jpg?v=1710154068","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-S2K-00T\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDramatic temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Honda S2000\u003cbr\u003eThermostatic option available\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote AP1 S2000 (2000–2003) vehicles will require minor bending of A\/C lines for cooler and bracket installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes F20C, F22C\u003cbr\u003eChassis Codes AP1 ,AP2\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets (Including Horn Relocation Bracket)\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 8in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system. Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000. This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability. It includes preassembled stainless steel lines and S2000 specific mounting brackets for a painless and clean installation. The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDramatic temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Honda S2000\u003cbr\u003eThermostatic option available\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote AP1 S2000 (2000–2003) vehicles will require minor bending of A\/C lines for cooler and bracket installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes F20C, F22C\u003cbr\u003eChassis Codes AP1 ,AP2\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets (Including Horn Relocation Bracket)\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 8in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system. Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000. This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability. It includes preassembled stainless steel lines and S2000 specific mounting brackets for a painless and clean installation. The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561986175003,"title":"Mishimoto - Honda S2000 Thermostatic Oil Cooler Kit, Black - Black - AP1 AP2 - MMOC-S2K-00TBK","handle":"mishimoto-honda-s2000-thermostatic-oil-cooler-kit-black-black-ap1-ap2-mmoc-s2k-00tbk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-S2K-00TBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDramatic temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Honda S2000\u003cbr\u003eThermostatic option available\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote AP1 S2000 (2000–2003) vehicles will require minor bending of A\/C lines for cooler and bracket installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes F20C, F22C\u003cbr\u003eChassis Codes AP1 ,AP2\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets (Including Horn Relocation Bracket)\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 8in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system. Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000. This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability. It includes preassembled stainless steel lines and S2000 specific mounting brackets for a painless and clean installation. The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDramatic temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Honda S2000\u003cbr\u003eThermostatic option available\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote AP1 S2000 (2000–2003) vehicles will require minor bending of A\/C lines for cooler and bracket installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes F20C, F22C\u003cbr\u003eChassis Codes AP1 ,AP2\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets (Including Horn Relocation Bracket)\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 8in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system. Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000. This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability. It includes preassembled stainless steel lines and S2000 specific mounting brackets for a painless and clean installation. The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2025-04-14T11:29:11+08:00","created_at":"2018-01-24T23:24:06+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","755x27.3y1z0","car-specific","cooling","CTOT14","honda","mishimoto","oil-cooler-kits","oil-coolers","s2000-ap1-1999-2003-na-f20c-i4","s2000-ap2-2003-2009-na-f22c-i4","US1","ws112"],"price":91698,"price_min":91698,"price_max":91698,"available":true,"price_varies":false,"compare_at_price":98600,"compare_at_price_min":98600,"compare_at_price_max":98600,"compare_at_price_varies":false,"variants":[{"id":5990382829595,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-S2K-00TBK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Honda S2000 Thermostatic Oil Cooler Kit, Black - Black - AP1 AP2 - MMOC-S2K-00TBK","public_title":null,"options":["Default Title"],"price":91698,"weight":9126,"compare_at_price":98600,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-S2K-00TBK.jpg?v=1710154075"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-S2K-00TBK.jpg?v=1710154075","options":["Title"],"media":[{"alt":"Mishimoto - Honda S2000 Thermostatic Oil Cooler Kit, Black - Black - AP1 AP2 - MMOC-S2K-00TBK - Rzcrewgarage","id":1351399407713,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-S2K-00TBK.jpg?v=1710154075"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-S2K-00TBK.jpg?v=1710154075","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-S2K-00TBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDramatic temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Honda S2000\u003cbr\u003eThermostatic option available\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote AP1 S2000 (2000–2003) vehicles will require minor bending of A\/C lines for cooler and bracket installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes F20C, F22C\u003cbr\u003eChassis Codes AP1 ,AP2\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets (Including Horn Relocation Bracket)\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 8in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system. Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000. This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability. It includes preassembled stainless steel lines and S2000 specific mounting brackets for a painless and clean installation. The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDramatic temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Honda S2000\u003cbr\u003eThermostatic option available\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote AP1 S2000 (2000–2003) vehicles will require minor bending of A\/C lines for cooler and bracket installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes F20C, F22C\u003cbr\u003eChassis Codes AP1 ,AP2\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets (Including Horn Relocation Bracket)\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 8in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system. Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000. This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability. It includes preassembled stainless steel lines and S2000 specific mounting brackets for a painless and clean installation. The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561990926363,"title":"Mishimoto - Mazda RX8 Oil Line Kit - SE3P - MMSBH-RX8-04K","handle":"mishimoto-mazda-rx8-oil-line-kit-se3p-mmsbh-rx8-04k","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMSBH-RX8-04K\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2004–2011 Mazda RX-8\u003cbr\u003ePremade braided stainless steel oil lines and aluminum fittings replace corrosion-prone stock rubber lines\u003cbr\u003eFull kit includes four braided stainless steel oil lines, M18 banjo bolts, and all the necessary fittings and oil seals for a trouble-free installation\u003cbr\u003eOil lines come prelabeled for easy identification\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Stainless Steel\u003cbr\u003eMax Recommended PSI 750psi\u003cbr\u003eMin Temp -40°F\u003cbr\u003eNote This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eMax Temp +300°F\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 13B-MSP (Renesis)\u003cbr\u003eChassis Codes SE3P\u003cbr\u003eCaution This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) 2ft, 4in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(1) 4ft, 8in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 4in Stainless Steel Braided Hose with 45 Degree and Straight -10AN Fittings\u003cbr\u003e(1) 2ft, 2in Stainless Steel Braided Hose with 90 Degree and Straight -10AN Fittings\u003cbr\u003e(4) M18 x -10AN Fittings w\/ Dowty Oil Seals\u003cbr\u003e(2) M18 x -10AN Banjo Bolts w\/ Dowty Oil Seals\u003cbr\u003e(1) 10AN – 10AN Male Connector\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mazda RX-8 has a high-winding rotary engine capable of easily reaching 9,000 RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX-8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine’s oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber oil lines and steel fittings can severely corrode and degrade over time. \u003cbr\u003e\u003cbr\u003eThis full kit from Mishimoto replaces all the RX-8 oil cooler lines with braided stainless units and aluminum fittings that will not corrode or degrade over time. This oil line kit also replaces the most frequent line to corrode, which is located on the left hand side of the car near the front suspension assembly. With Mishimoto replacement Mazda RX-8 oil cooler lines, all oil lines between the engine and both oil coolers are replaced, including the intermediate line that spans both oil coolers found in all manual transmission models. \u003cbr\u003e\u003cbr\u003eThese Mazda RX-8 oil cooler lines fit onto the vehicle with no additional modification, and d not require any cutting to your vehicle or permanent removal of parts. This oil line kit comes with all banjo bolts, M18 fittings, and a male to male -10AN connector to complete the installation. Keep your RX-8 protected and running smooth! As with all our products, these RX-8 oil cooler lines include the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2004–2011 Mazda RX-8\u003cbr\u003ePremade braided stainless steel oil lines and aluminum fittings replace corrosion-prone stock rubber lines\u003cbr\u003eFull kit includes four braided stainless steel oil lines, M18 banjo bolts, and all the necessary fittings and oil seals for a trouble-free installation\u003cbr\u003eOil lines come prelabeled for easy identification\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Stainless Steel\u003cbr\u003eMax Recommended PSI 750psi\u003cbr\u003eMin Temp -40°F\u003cbr\u003eNote This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eMax Temp +300°F\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 13B-MSP (Renesis)\u003cbr\u003eChassis Codes SE3P\u003cbr\u003eCaution This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) 2ft, 4in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(1) 4ft, 8in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 4in Stainless Steel Braided Hose with 45 Degree and Straight -10AN Fittings\u003cbr\u003e(1) 2ft, 2in Stainless Steel Braided Hose with 90 Degree and Straight -10AN Fittings\u003cbr\u003e(4) M18 x -10AN Fittings w\/ Dowty Oil Seals\u003cbr\u003e(2) M18 x -10AN Banjo Bolts w\/ Dowty Oil Seals\u003cbr\u003e(1) 10AN – 10AN Male Connector\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mazda RX-8 has a high-winding rotary engine capable of easily reaching 9,000 RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX-8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine’s oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber oil lines and steel fittings can severely corrode and degrade over time. \u003cbr\u003e\u003cbr\u003eThis full kit from Mishimoto replaces all the RX-8 oil cooler lines with braided stainless units and aluminum fittings that will not corrode or degrade over time. This oil line kit also replaces the most frequent line to corrode, which is located on the left hand side of the car near the front suspension assembly. With Mishimoto replacement Mazda RX-8 oil cooler lines, all oil lines between the engine and both oil coolers are replaced, including the intermediate line that spans both oil coolers found in all manual transmission models. \u003cbr\u003e\u003cbr\u003eThese Mazda RX-8 oil cooler lines fit onto the vehicle with no additional modification, and d not require any cutting to your vehicle or permanent removal of parts. This oil line kit comes with all banjo bolts, M18 fittings, and a male to male -10AN connector to complete the installation. Keep your RX-8 protected and running smooth! As with all our products, these RX-8 oil cooler lines include the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:25:05+08:00","created_at":"2018-01-24T23:25:05+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","658x27.3y1z0","car-specific","cooling","CTOT14","mazda","mishimoto","oil-cooler-hoses","oil-coolers","rx-8-se3p-kouki-2008-2013-na-13b-msp-r","rx-8-se3p-zenki-2003-2008-na-13b-msp-r","US1","ws112"],"price":79887,"price_min":79887,"price_max":79887,"available":true,"price_varies":false,"compare_at_price":85900,"compare_at_price_min":85900,"compare_at_price_max":85900,"compare_at_price_varies":false,"variants":[{"id":5990388203547,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMSBH-RX8-04K","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Mazda RX8 Oil Line Kit - SE3P - MMSBH-RX8-04K","public_title":null,"options":["Default Title"],"price":79887,"weight":7674,"compare_at_price":85900,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMSBH-RX8-04K.jpg?v=1710154108"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMSBH-RX8-04K.jpg?v=1710154108","options":["Title"],"media":[{"alt":"Mishimoto - Mazda RX8 Oil Line Kit - SE3P - MMSBH-RX8-04K - Rzcrewgarage","id":1351401504865,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMSBH-RX8-04K.jpg?v=1710154108"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMSBH-RX8-04K.jpg?v=1710154108","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMSBH-RX8-04K\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2004–2011 Mazda RX-8\u003cbr\u003ePremade braided stainless steel oil lines and aluminum fittings replace corrosion-prone stock rubber lines\u003cbr\u003eFull kit includes four braided stainless steel oil lines, M18 banjo bolts, and all the necessary fittings and oil seals for a trouble-free installation\u003cbr\u003eOil lines come prelabeled for easy identification\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Stainless Steel\u003cbr\u003eMax Recommended PSI 750psi\u003cbr\u003eMin Temp -40°F\u003cbr\u003eNote This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eMax Temp +300°F\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 13B-MSP (Renesis)\u003cbr\u003eChassis Codes SE3P\u003cbr\u003eCaution This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) 2ft, 4in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(1) 4ft, 8in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 4in Stainless Steel Braided Hose with 45 Degree and Straight -10AN Fittings\u003cbr\u003e(1) 2ft, 2in Stainless Steel Braided Hose with 90 Degree and Straight -10AN Fittings\u003cbr\u003e(4) M18 x -10AN Fittings w\/ Dowty Oil Seals\u003cbr\u003e(2) M18 x -10AN Banjo Bolts w\/ Dowty Oil Seals\u003cbr\u003e(1) 10AN – 10AN Male Connector\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mazda RX-8 has a high-winding rotary engine capable of easily reaching 9,000 RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX-8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine’s oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber oil lines and steel fittings can severely corrode and degrade over time. \u003cbr\u003e\u003cbr\u003eThis full kit from Mishimoto replaces all the RX-8 oil cooler lines with braided stainless units and aluminum fittings that will not corrode or degrade over time. This oil line kit also replaces the most frequent line to corrode, which is located on the left hand side of the car near the front suspension assembly. With Mishimoto replacement Mazda RX-8 oil cooler lines, all oil lines between the engine and both oil coolers are replaced, including the intermediate line that spans both oil coolers found in all manual transmission models. \u003cbr\u003e\u003cbr\u003eThese Mazda RX-8 oil cooler lines fit onto the vehicle with no additional modification, and d not require any cutting to your vehicle or permanent removal of parts. This oil line kit comes with all banjo bolts, M18 fittings, and a male to male -10AN connector to complete the installation. Keep your RX-8 protected and running smooth! As with all our products, these RX-8 oil cooler lines include the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2004–2011 Mazda RX-8\u003cbr\u003ePremade braided stainless steel oil lines and aluminum fittings replace corrosion-prone stock rubber lines\u003cbr\u003eFull kit includes four braided stainless steel oil lines, M18 banjo bolts, and all the necessary fittings and oil seals for a trouble-free installation\u003cbr\u003eOil lines come prelabeled for easy identification\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Stainless Steel\u003cbr\u003eMax Recommended PSI 750psi\u003cbr\u003eMin Temp -40°F\u003cbr\u003eNote This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eMax Temp +300°F\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 13B-MSP (Renesis)\u003cbr\u003eChassis Codes SE3P\u003cbr\u003eCaution This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) 2ft, 4in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(1) 4ft, 8in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 4in Stainless Steel Braided Hose with 45 Degree and Straight -10AN Fittings\u003cbr\u003e(1) 2ft, 2in Stainless Steel Braided Hose with 90 Degree and Straight -10AN Fittings\u003cbr\u003e(4) M18 x -10AN Fittings w\/ Dowty Oil Seals\u003cbr\u003e(2) M18 x -10AN Banjo Bolts w\/ Dowty Oil Seals\u003cbr\u003e(1) 10AN – 10AN Male Connector\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mazda RX-8 has a high-winding rotary engine capable of easily reaching 9,000 RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX-8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine’s oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber oil lines and steel fittings can severely corrode and degrade over time. \u003cbr\u003e\u003cbr\u003eThis full kit from Mishimoto replaces all the RX-8 oil cooler lines with braided stainless units and aluminum fittings that will not corrode or degrade over time. This oil line kit also replaces the most frequent line to corrode, which is located on the left hand side of the car near the front suspension assembly. With Mishimoto replacement Mazda RX-8 oil cooler lines, all oil lines between the engine and both oil coolers are replaced, including the intermediate line that spans both oil coolers found in all manual transmission models. \u003cbr\u003e\u003cbr\u003eThese Mazda RX-8 oil cooler lines fit onto the vehicle with no additional modification, and d not require any cutting to your vehicle or permanent removal of parts. This oil line kit comes with all banjo bolts, M18 fittings, and a male to male -10AN connector to complete the installation. Keep your RX-8 protected and running smooth! As with all our products, these RX-8 oil cooler lines include the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561992204315,"title":"Mishimoto - Mazda RX8 Primary Replacement Oil Line - SE3P - MMSBH-RX8-04","handle":"mishimoto-mazda-rx8-primary-replacement-oil-line-se3p-mmsbh-rx8-04","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMSBH-RX8-04\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct-fit replacement for the 2004–2011 Mazda RX-8\u003cbr\u003ePremade braided stainless steel oil line and aluminum fittings replace corrosion-prone stock rubber line\u003cbr\u003eKit comes with the braided stainless steel line, M18 banjo bolts, and oil seals for a trouble-free installation\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Stainless Steel\u003cbr\u003eMax Recommended PSI 750psi\u003cbr\u003eMin Temp -40°F\u003cbr\u003eNote This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eMax Temp +300°F\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 13B-MSP (Renesis)\u003cbr\u003eChassis Codes SE3P\u003cbr\u003eCaution This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) 2ft, 4in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(2) M18 x -10AN Banjo Bolts w\/ Dowty Oil Seals\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mazda RX-8 has a high-winding rotary engine capable of easily reaching 9,000 RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX-8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine’s oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber RX-8 oil cooler lines and steel fittings can severely corrode and degrade over time. The most frequent RX-8 oil cooler line to corrode is located on the left hand side of the car near the front suspension assembly. The design of the vehicle and location of the line are apt to collect dirt and road salt from winter. With the Mishimoto replacement oil line, not only is this problematic line replaced, it’s replaced with a full braided stainless steel oil line and aluminum M18 to 10AN banjo fittings that will not corrode or break down over time. The Mazda RX-8 oil cooler line fits onto the vehicle with no additional modification, and does not require any cutting to your vehicle or permanent removal of parts. Keep your RX-8 protected and running smooth! As with all our products, this RX-8 oil cooler line includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct-fit replacement for the 2004–2011 Mazda RX-8\u003cbr\u003ePremade braided stainless steel oil line and aluminum fittings replace corrosion-prone stock rubber line\u003cbr\u003eKit comes with the braided stainless steel line, M18 banjo bolts, and oil seals for a trouble-free installation\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Stainless Steel\u003cbr\u003eMax Recommended PSI 750psi\u003cbr\u003eMin Temp -40°F\u003cbr\u003eNote This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eMax Temp +300°F\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 13B-MSP (Renesis)\u003cbr\u003eChassis Codes SE3P\u003cbr\u003eCaution This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) 2ft, 4in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(2) M18 x -10AN Banjo Bolts w\/ Dowty Oil Seals\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mazda RX-8 has a high-winding rotary engine capable of easily reaching 9,000 RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX-8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine’s oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber RX-8 oil cooler lines and steel fittings can severely corrode and degrade over time. The most frequent RX-8 oil cooler line to corrode is located on the left hand side of the car near the front suspension assembly. The design of the vehicle and location of the line are apt to collect dirt and road salt from winter. With the Mishimoto replacement oil line, not only is this problematic line replaced, it’s replaced with a full braided stainless steel oil line and aluminum M18 to 10AN banjo fittings that will not corrode or break down over time. The Mazda RX-8 oil cooler line fits onto the vehicle with no additional modification, and does not require any cutting to your vehicle or permanent removal of parts. Keep your RX-8 protected and running smooth! As with all our products, this RX-8 oil cooler line includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2025-04-14T11:29:21+08:00","created_at":"2018-01-24T23:25:14+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","214x27.1y1z0","car-specific","cooling","CTOT14","mazda","mishimoto","oil-cooler-hoses","oil-coolers","rx-8-se3p-kouki-2008-2013-na-13b-msp-r","rx-8-se3p-zenki-2003-2008-na-13b-msp-r","US1","ws111"],"price":26226,"price_min":26226,"price_max":26226,"available":true,"price_varies":false,"compare_at_price":27900,"compare_at_price_min":27900,"compare_at_price_max":27900,"compare_at_price_varies":false,"variants":[{"id":5990391185435,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMSBH-RX8-04","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Mazda RX8 Primary Replacement Oil Line - SE3P - MMSBH-RX8-04","public_title":null,"options":["Default Title"],"price":26226,"weight":4953,"compare_at_price":27900,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMSBH-RX8-04.jpg?v=1710154111"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMSBH-RX8-04.jpg?v=1710154111","options":["Title"],"media":[{"alt":"Mishimoto - Mazda RX8 Primary Replacement Oil Line - SE3P - MMSBH-RX8-04 - Rzcrewgarage","id":1351401734241,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMSBH-RX8-04.jpg?v=1710154111"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMSBH-RX8-04.jpg?v=1710154111","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMSBH-RX8-04\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct-fit replacement for the 2004–2011 Mazda RX-8\u003cbr\u003ePremade braided stainless steel oil line and aluminum fittings replace corrosion-prone stock rubber line\u003cbr\u003eKit comes with the braided stainless steel line, M18 banjo bolts, and oil seals for a trouble-free installation\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Stainless Steel\u003cbr\u003eMax Recommended PSI 750psi\u003cbr\u003eMin Temp -40°F\u003cbr\u003eNote This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eMax Temp +300°F\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 13B-MSP (Renesis)\u003cbr\u003eChassis Codes SE3P\u003cbr\u003eCaution This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) 2ft, 4in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(2) M18 x -10AN Banjo Bolts w\/ Dowty Oil Seals\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mazda RX-8 has a high-winding rotary engine capable of easily reaching 9,000 RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX-8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine’s oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber RX-8 oil cooler lines and steel fittings can severely corrode and degrade over time. The most frequent RX-8 oil cooler line to corrode is located on the left hand side of the car near the front suspension assembly. The design of the vehicle and location of the line are apt to collect dirt and road salt from winter. With the Mishimoto replacement oil line, not only is this problematic line replaced, it’s replaced with a full braided stainless steel oil line and aluminum M18 to 10AN banjo fittings that will not corrode or break down over time. The Mazda RX-8 oil cooler line fits onto the vehicle with no additional modification, and does not require any cutting to your vehicle or permanent removal of parts. Keep your RX-8 protected and running smooth! As with all our products, this RX-8 oil cooler line includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct-fit replacement for the 2004–2011 Mazda RX-8\u003cbr\u003ePremade braided stainless steel oil line and aluminum fittings replace corrosion-prone stock rubber line\u003cbr\u003eKit comes with the braided stainless steel line, M18 banjo bolts, and oil seals for a trouble-free installation\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Stainless Steel\u003cbr\u003eMax Recommended PSI 750psi\u003cbr\u003eMin Temp -40°F\u003cbr\u003eNote This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eMax Temp +300°F\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 13B-MSP (Renesis)\u003cbr\u003eChassis Codes SE3P\u003cbr\u003eCaution This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) 2ft, 4in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(2) M18 x -10AN Banjo Bolts w\/ Dowty Oil Seals\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mazda RX-8 has a high-winding rotary engine capable of easily reaching 9,000 RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX-8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine’s oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber RX-8 oil cooler lines and steel fittings can severely corrode and degrade over time. The most frequent RX-8 oil cooler line to corrode is located on the left hand side of the car near the front suspension assembly. The design of the vehicle and location of the line are apt to collect dirt and road salt from winter. With the Mishimoto replacement oil line, not only is this problematic line replaced, it’s replaced with a full braided stainless steel oil line and aluminum M18 to 10AN banjo fittings that will not corrode or break down over time. The Mazda RX-8 oil cooler line fits onto the vehicle with no additional modification, and does not require any cutting to your vehicle or permanent removal of parts. Keep your RX-8 protected and running smooth! As with all our products, this RX-8 oil cooler line includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561992040475,"title":"Mishimoto - Mishimoto BMW E36 E46 Oil Line Fitting Kit - E36 E46 - MMOCF-BMW","handle":"mishimoto-mishimoto-bmw-e36-e46-oil-line-fitting-kit-e36-e46-mmocf-bmw","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOCF-BMW\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Allows for use of -10AN fittings for custom\u003cbr\u003e100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate\u003cbr\u003eIncludes durable stock\u003cbr\u003eBMW O-rings for leak-free installation\u003cbr\u003eProvides additional engine bay space for applications with an oil accumulator or supercharger setup\u003cbr\u003eIncluded as part of the Mishimoto BMW E46 M3 Oil Cooler Kit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial \u003cbr\u003eFITTING CLAMP MATERIAL\u003cbr\u003e303 Stainless Steel\u003cbr\u003e\u003cbr\u003e-10AN FITTINGS MATERIAL\u003cbr\u003e6061 Aluminum\u003cbr\u003e\u003cbr\u003eNote This kit works with vehicles which have stock oil cooler housings.\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes S54, N54, N55\u003cbr\u003eChassis Codes E36, E46\u003cbr\u003eInstall Torque Specs 10 ft\/lbs for Oil Line Fitting Kit bolt\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eOverall Height 1.3\" \u003cbr\u003eOverall Length 2.44\" \u003cbr\u003eOverall Width 1.51\" (assembled) \u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Fitting Clamp \u003cbr\u003e(2) -10AN Fittings \u003cbr\u003e(2) BMW Oil O-rings \u003cbr\u003e(1) M8 x 1.25 x 25mm Button-Head Bolt \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eInstall a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Pair this fitting kit with some Mishimoto stainless steel oil lines and one of our stacked-plate oil coolers to create a complete cooling setup for your BMW. As with all our products, the Mishimoto BMW Oil Line Fitting Kit includes our Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Allows for use of -10AN fittings for custom\u003cbr\u003e100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate\u003cbr\u003eIncludes durable stock\u003cbr\u003eBMW O-rings for leak-free installation\u003cbr\u003eProvides additional engine bay space for applications with an oil accumulator or supercharger setup\u003cbr\u003eIncluded as part of the Mishimoto BMW E46 M3 Oil Cooler Kit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial \u003cbr\u003eFITTING CLAMP MATERIAL\u003cbr\u003e303 Stainless Steel\u003cbr\u003e\u003cbr\u003e-10AN FITTINGS MATERIAL\u003cbr\u003e6061 Aluminum\u003cbr\u003e\u003cbr\u003eNote This kit works with vehicles which have stock oil cooler housings.\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes S54, N54, N55\u003cbr\u003eChassis Codes E36, E46\u003cbr\u003eInstall Torque Specs 10 ft\/lbs for Oil Line Fitting Kit bolt\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eOverall Height 1.3\" \u003cbr\u003eOverall Length 2.44\" \u003cbr\u003eOverall Width 1.51\" (assembled) \u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Fitting Clamp \u003cbr\u003e(2) -10AN Fittings \u003cbr\u003e(2) BMW Oil O-rings \u003cbr\u003e(1) M8 x 1.25 x 25mm Button-Head Bolt \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eInstall a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Pair this fitting kit with some Mishimoto stainless steel oil lines and one of our stacked-plate oil coolers to create a complete cooling setup for your BMW. As with all our products, the Mishimoto BMW Oil Line Fitting Kit includes our Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:25:09+08:00","created_at":"2018-01-24T23:25:09+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["1-series-e82-2007-2013-tc-i6","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","3-series-cabriolet-e93-2004-2011-na-i6","3-series-cabriolet-e93-2007-2013-tc-i6","3-series-coupe-e92-2004-2011-na-i6","3-series-coupe-e92-2007-2013-tc-i6","3-series-e90-2004-2011-na-i6","3-series-e90-2007-2013-tc-i6","98x27.4y1z0","bmw","car-specific","cooling","CTOT14","mishimoto","oil-cooler-accessories","oil-coolers","US1","ws112"],"price":11904,"price_min":11904,"price_max":11904,"available":true,"price_varies":false,"compare_at_price":12800,"compare_at_price_min":12800,"compare_at_price_max":12800,"compare_at_price_varies":false,"variants":[{"id":5990389317659,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOCF-BMW","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Mishimoto BMW E36 E46 Oil Line Fitting Kit - E36 E46 - MMOCF-BMW","public_title":null,"options":["Default Title"],"price":11904,"weight":4181,"compare_at_price":12800,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOCF-BMW_dc87dcb0-50fa-432d-a3a6-4835b75229d0.jpg?v=1710154108"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOCF-BMW_dc87dcb0-50fa-432d-a3a6-4835b75229d0.jpg?v=1710154108","options":["Title"],"media":[{"alt":"Mishimoto - Mishimoto BMW E36 E46 Oil Line Fitting Kit - E36 E46 - MMOCF-BMW - Rzcrewgarage","id":1351401635937,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOCF-BMW_dc87dcb0-50fa-432d-a3a6-4835b75229d0.jpg?v=1710154108"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOCF-BMW_dc87dcb0-50fa-432d-a3a6-4835b75229d0.jpg?v=1710154108","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOCF-BMW\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Allows for use of -10AN fittings for custom\u003cbr\u003e100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate\u003cbr\u003eIncludes durable stock\u003cbr\u003eBMW O-rings for leak-free installation\u003cbr\u003eProvides additional engine bay space for applications with an oil accumulator or supercharger setup\u003cbr\u003eIncluded as part of the Mishimoto BMW E46 M3 Oil Cooler Kit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial \u003cbr\u003eFITTING CLAMP MATERIAL\u003cbr\u003e303 Stainless Steel\u003cbr\u003e\u003cbr\u003e-10AN FITTINGS MATERIAL\u003cbr\u003e6061 Aluminum\u003cbr\u003e\u003cbr\u003eNote This kit works with vehicles which have stock oil cooler housings.\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes S54, N54, N55\u003cbr\u003eChassis Codes E36, E46\u003cbr\u003eInstall Torque Specs 10 ft\/lbs for Oil Line Fitting Kit bolt\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eOverall Height 1.3\" \u003cbr\u003eOverall Length 2.44\" \u003cbr\u003eOverall Width 1.51\" (assembled) \u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Fitting Clamp \u003cbr\u003e(2) -10AN Fittings \u003cbr\u003e(2) BMW Oil O-rings \u003cbr\u003e(1) M8 x 1.25 x 25mm Button-Head Bolt \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eInstall a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Pair this fitting kit with some Mishimoto stainless steel oil lines and one of our stacked-plate oil coolers to create a complete cooling setup for your BMW. As with all our products, the Mishimoto BMW Oil Line Fitting Kit includes our Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Allows for use of -10AN fittings for custom\u003cbr\u003e100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate\u003cbr\u003eIncludes durable stock\u003cbr\u003eBMW O-rings for leak-free installation\u003cbr\u003eProvides additional engine bay space for applications with an oil accumulator or supercharger setup\u003cbr\u003eIncluded as part of the Mishimoto BMW E46 M3 Oil Cooler Kit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial \u003cbr\u003eFITTING CLAMP MATERIAL\u003cbr\u003e303 Stainless Steel\u003cbr\u003e\u003cbr\u003e-10AN FITTINGS MATERIAL\u003cbr\u003e6061 Aluminum\u003cbr\u003e\u003cbr\u003eNote This kit works with vehicles which have stock oil cooler housings.\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes S54, N54, N55\u003cbr\u003eChassis Codes E36, E46\u003cbr\u003eInstall Torque Specs 10 ft\/lbs for Oil Line Fitting Kit bolt\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eOverall Height 1.3\" \u003cbr\u003eOverall Length 2.44\" \u003cbr\u003eOverall Width 1.51\" (assembled) \u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Fitting Clamp \u003cbr\u003e(2) -10AN Fittings \u003cbr\u003e(2) BMW Oil O-rings \u003cbr\u003e(1) M8 x 1.25 x 25mm Button-Head Bolt \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eInstall a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Pair this fitting kit with some Mishimoto stainless steel oil lines and one of our stacked-plate oil coolers to create a complete cooling setup for your BMW. As with all our products, the Mishimoto BMW Oil Line Fitting Kit includes our Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561990533147,"title":"Mishimoto - Mishimoto BMW E82 E90 E92 E93 Oil Line Fitting Kit - E82 E90 E92 E93 - MMOCF-BMW","handle":"mishimoto-mishimoto-bmw-e82-e90-e92-e93-oil-line-fitting-kit-e82-e90-e92-e93-mmocf-bmw","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOCF-BMW\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Allows for use of -10AN fittings for custom\u003cbr\u003e100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate\u003cbr\u003eIncludes durable stock\u003cbr\u003eBMW O-rings for leak-free installation\u003cbr\u003eProvides additional engine bay space for applications with an oil accumulator or supercharger setup\u003cbr\u003eIncluded as part of the Mishimoto BMW E46 M3 Oil Cooler Kit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial \u003cbr\u003eFITTING CLAMP MATERIAL\u003cbr\u003e303 Stainless Steel\u003cbr\u003e\u003cbr\u003e-10AN FITTINGS MATERIAL\u003cbr\u003e6061 Aluminum\u003cbr\u003e\u003cbr\u003eNote This kit works with vehicles which have stock oil cooler housings.\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes S54, N54, N55\u003cbr\u003eChassis Codes E82, E90, E92, E93\u003cbr\u003eInstall Torque Specs 10 ft\/lbs for Oil Line Fitting Kit bolt\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eOverall Height 1.3\" \u003cbr\u003eOverall Length 2.44\" \u003cbr\u003eOverall Width 1.51\" (assembled) \u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Fitting Clamp \u003cbr\u003e(2) -10AN Fittings \u003cbr\u003e(2) BMW Oil O-rings \u003cbr\u003e(1) M8 x 1.25 x 25mm Button-Head Bolt \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eInstall a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Pair this fitting kit with some Mishimoto stainless steel oil lines and one of our stacked-plate oil coolers to create a complete cooling setup for your BMW. As with all our products, the Mishimoto BMW Oil Line Fitting Kit includes our Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Allows for use of -10AN fittings for custom\u003cbr\u003e100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate\u003cbr\u003eIncludes durable stock\u003cbr\u003eBMW O-rings for leak-free installation\u003cbr\u003eProvides additional engine bay space for applications with an oil accumulator or supercharger setup\u003cbr\u003eIncluded as part of the Mishimoto BMW E46 M3 Oil Cooler Kit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial \u003cbr\u003eFITTING CLAMP MATERIAL\u003cbr\u003e303 Stainless Steel\u003cbr\u003e\u003cbr\u003e-10AN FITTINGS MATERIAL\u003cbr\u003e6061 Aluminum\u003cbr\u003e\u003cbr\u003eNote This kit works with vehicles which have stock oil cooler housings.\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes S54, N54, N55\u003cbr\u003eChassis Codes E82, E90, E92, E93\u003cbr\u003eInstall Torque Specs 10 ft\/lbs for Oil Line Fitting Kit bolt\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eOverall Height 1.3\" \u003cbr\u003eOverall Length 2.44\" \u003cbr\u003eOverall Width 1.51\" (assembled) \u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Fitting Clamp \u003cbr\u003e(2) -10AN Fittings \u003cbr\u003e(2) BMW Oil O-rings \u003cbr\u003e(1) M8 x 1.25 x 25mm Button-Head Bolt \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eInstall a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Pair this fitting kit with some Mishimoto stainless steel oil lines and one of our stacked-plate oil coolers to create a complete cooling setup for your BMW. As with all our products, the Mishimoto BMW Oil Line Fitting Kit includes our Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:53+08:00","created_at":"2018-01-24T23:24:54+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["1-series-e82-2007-2013-tc-i6","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","3-series-cabriolet-e93-2004-2011-na-i6","3-series-cabriolet-e93-2007-2013-tc-i6","3-series-coupe-e92-2004-2011-na-i6","3-series-coupe-e92-2007-2013-tc-i6","3-series-e90-2004-2011-na-i6","3-series-e90-2007-2013-tc-i6","98x27.4y1z0","bmw","car-specific","cooling","CTOT14","mishimoto","oil-cooler-accessories","oil-coolers","US1","ws112"],"price":11904,"price_min":11904,"price_max":11904,"available":true,"price_varies":false,"compare_at_price":12800,"compare_at_price_min":12800,"compare_at_price_max":12800,"compare_at_price_varies":false,"variants":[{"id":5990387712027,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOCF-BMW","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Mishimoto BMW E82 E90 E92 E93 Oil Line Fitting Kit - E82 E90 E92 E93 - MMOCF-BMW","public_title":null,"options":["Default Title"],"price":11904,"weight":4181,"compare_at_price":12800,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOCF-BMW.jpg?v=1710154097"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOCF-BMW.jpg?v=1710154097","options":["Title"],"media":[{"alt":"Mishimoto - Mishimoto BMW E82 E90 E92 E93 Oil Line Fitting Kit - E82 E90 E92 E93 - MMOCF-BMW - Rzcrewgarage","id":1351401144417,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOCF-BMW.jpg?v=1710154097"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOCF-BMW.jpg?v=1710154097","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOCF-BMW\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Allows for use of -10AN fittings for custom\u003cbr\u003e100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate\u003cbr\u003eIncludes durable stock\u003cbr\u003eBMW O-rings for leak-free installation\u003cbr\u003eProvides additional engine bay space for applications with an oil accumulator or supercharger setup\u003cbr\u003eIncluded as part of the Mishimoto BMW E46 M3 Oil Cooler Kit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial \u003cbr\u003eFITTING CLAMP MATERIAL\u003cbr\u003e303 Stainless Steel\u003cbr\u003e\u003cbr\u003e-10AN FITTINGS MATERIAL\u003cbr\u003e6061 Aluminum\u003cbr\u003e\u003cbr\u003eNote This kit works with vehicles which have stock oil cooler housings.\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes S54, N54, N55\u003cbr\u003eChassis Codes E82, E90, E92, E93\u003cbr\u003eInstall Torque Specs 10 ft\/lbs for Oil Line Fitting Kit bolt\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eOverall Height 1.3\" \u003cbr\u003eOverall Length 2.44\" \u003cbr\u003eOverall Width 1.51\" (assembled) \u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Fitting Clamp \u003cbr\u003e(2) -10AN Fittings \u003cbr\u003e(2) BMW Oil O-rings \u003cbr\u003e(1) M8 x 1.25 x 25mm Button-Head Bolt \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eInstall a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Pair this fitting kit with some Mishimoto stainless steel oil lines and one of our stacked-plate oil coolers to create a complete cooling setup for your BMW. As with all our products, the Mishimoto BMW Oil Line Fitting Kit includes our Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Allows for use of -10AN fittings for custom\u003cbr\u003e100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate\u003cbr\u003eIncludes durable stock\u003cbr\u003eBMW O-rings for leak-free installation\u003cbr\u003eProvides additional engine bay space for applications with an oil accumulator or supercharger setup\u003cbr\u003eIncluded as part of the Mishimoto BMW E46 M3 Oil Cooler Kit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial \u003cbr\u003eFITTING CLAMP MATERIAL\u003cbr\u003e303 Stainless Steel\u003cbr\u003e\u003cbr\u003e-10AN FITTINGS MATERIAL\u003cbr\u003e6061 Aluminum\u003cbr\u003e\u003cbr\u003eNote This kit works with vehicles which have stock oil cooler housings.\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes S54, N54, N55\u003cbr\u003eChassis Codes E82, E90, E92, E93\u003cbr\u003eInstall Torque Specs 10 ft\/lbs for Oil Line Fitting Kit bolt\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eOverall Height 1.3\" \u003cbr\u003eOverall Length 2.44\" \u003cbr\u003eOverall Width 1.51\" (assembled) \u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Fitting Clamp \u003cbr\u003e(2) -10AN Fittings \u003cbr\u003e(2) BMW Oil O-rings \u003cbr\u003e(1) M8 x 1.25 x 25mm Button-Head Bolt \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eInstall a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Pair this fitting kit with some Mishimoto stainless steel oil lines and one of our stacked-plate oil coolers to create a complete cooling setup for your BMW. As with all our products, the Mishimoto BMW Oil Line Fitting Kit includes our Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":7727510192310,"title":"Trust Greddy Oil Cooler Kit STD Suzuki Swift Sport ZC31S","handle":"trust-greddy-oil-cooler-kit-std-suzuki-swift-sport-zc31s-12094605","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Trust Greddy\u003cbr\u003ePart Number: 12094605\u003cbr\u003eNumber of Rows: 10 Rows\u003cbr\u003e\u003cbr\u003eThis oil cooler has big amount of core which equips offset fin inside of the core tube. And it helps to enrich the radiation, and at the same time, it prevents the pressure loss.\nThe “sandwich block” which is used at the place of original oil filter makes it possible to reduce the amount of parts and it helps your installation work easier.\nBy using TRUST OIL FILTER, the effect gets even better.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part is Universal\u003c!--split--\u003e","published_at":"2023-12-05T12:51:11+08:00","created_at":"2023-12-05T12:45:30+08:00","vendor":"Trust Greddy","type":"Oil Coolers","tags":["10rows","2004","2005","2006","2007","2008","2009","2010","75000x25y1z0","cooling","CTA217","JP1","oil-coolers","oilcoolers","suzuki","swift-sport-zc31s-2004-2010-na-m16a-i4","trust-greddy","ws117"],"price":62392,"price_min":62392,"price_max":62392,"available":true,"price_varies":false,"compare_at_price":70900,"compare_at_price_min":70900,"compare_at_price_max":70900,"compare_at_price_varies":false,"variants":[{"id":42533884657846,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"12094605","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Trust Greddy Oil Cooler Kit STD Suzuki Swift Sport ZC31S","public_title":null,"options":["Default Title"],"price":62392,"weight":6000,"compare_at_price":70900,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/trust-greddy-oil-cooler-kit-std-suzuki-swift-sport-zc31s-rzcrew.jpg?v=1710314417"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/trust-greddy-oil-cooler-kit-std-suzuki-swift-sport-zc31s-rzcrew.jpg?v=1710314417","options":["Title"],"media":[{"alt":"Trust Greddy Oil Cooler Kit STD Suzuki Swift Sport ZC31S -12094605 - RZCREWGARAGE","id":26909643702454,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/trust-greddy-oil-cooler-kit-std-suzuki-swift-sport-zc31s-rzcrew.jpg?v=1710314417"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/trust-greddy-oil-cooler-kit-std-suzuki-swift-sport-zc31s-rzcrew.jpg?v=1710314417","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Trust Greddy\u003cbr\u003ePart Number: 12094605\u003cbr\u003eNumber of Rows: 10 Rows\u003cbr\u003e\u003cbr\u003eThis oil cooler has big amount of core which equips offset fin inside of the core tube. And it helps to enrich the radiation, and at the same time, it prevents the pressure loss.\nThe “sandwich block” which is used at the place of original oil filter makes it possible to reduce the amount of parts and it helps your installation work easier.\nBy using TRUST OIL FILTER, the effect gets even better.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part is Universal\u003c!--split--\u003e"}