2012

{"id":430830518299,"title":"Cusco Japan Super Charger Kit - Toyota - 86 ZN6","handle":"super-charger-kit-zn6-965-720-b","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003eReference Number: 965 720 B\u003cbr\u003e\u003cbr\u003eThe Cusco Supercharger Kit was developed exclusively for the ultra high compression naturally aspirated FA20 engine to further enhance the responsiveness and torque to match that of a 3.0 liter engine.\u003cbr\u003eThe end result is a Supercharger Kit that is completely bolt-on developed by using a highly efficient Sprintex unit as a base along with Cusco's product engineering knowledge. \u003cbr\u003e\u003cbr\u003eIncreased torque similar to that of a 3.0 liter engine\u003cbr\u003eTwin screw type supercharger\u003cbr\u003eIntercooled \u0026amp; Non-intercooled kits available\u003cbr\u003eCompletely bolt-on. No modifications necessary. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePower Data\u003cbr\u003eOver a 30% increase in power output as compared to factory figures with a plentiful torque band that is usable in a dynamic range of conditions.\u003cbr\u003e\u003cbr\u003eCusco Supercharger Kit (Intercooled)\u003cbr\u003ePeak Power: 208PS\/7400rpm - 32.4% gain over factory\u003cbr\u003ePeak Torque: 24.6kg-m\/5600rpm - 43.0% gain over factory\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eECU modification not included with kit\u003cbr\u003eECU MAP calibration (fuel, ignition) required after installation. May require additional components depending on varying conditions of vehicle setup. (Please inquire within for more details)\u003cbr\u003e\u003cbr\u003ePressure sensor included with kit (replaces factory unit)\u003cbr\u003e\u003cbr\u003eKit contents:\u003cbr\u003eSupercharger Body (Intake manifold design)\u003cbr\u003eInlet pipe\u003cbr\u003eSilicone band\u003cbr\u003eThrottle body extension wiring\u003cbr\u003eAir pressure sensor assembly\u003cbr\u003eAir pressure sensor extension connector\u003cbr\u003eIdle pulley\u003cbr\u003eDrive belt (6PK-2615)\u003cbr\u003eCap bolt M14xP1.5x40\u003cbr\u003eIdle pulley bracket\u003cbr\u003eO ring intake manifold assembly flange\u003cbr\u003eO ring throttle body assembly\u003cbr\u003eVacuum switching valve assembly\u003cbr\u003e Bolt clip\u003cbr\u003e\u003cbr\u003e0\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e86 | ZN6 (Spec A to E) | 2012-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e86 | ZN6 (Spec A to E) | 2012-2018 | NA | 4U-GSE | H4","published_at":"2017-12-11T20:25:29+08:00","created_at":"2017-12-11T20:25:29+08:00","vendor":"Cusco Japan","type":"Supercharger Kits","tags":["2012","2013","2014","2015","2016","2017","2018","86-zn6-spec-a-to-e-2012-2018-na-4u-gse-h4","cusco-japan","forced-induction","jp1","supercharger-kits","toyota","ws111","ZN6"],"price":656477,"price_min":656477,"price_max":656477,"available":true,"price_varies":false,"compare_at_price":698380,"compare_at_price_min":698380,"compare_at_price_max":698380,"compare_at_price_varies":false,"variants":[{"id":5180298625051,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"965 720 B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Super Charger Kit - Toyota - 86 ZN6","public_title":null,"options":["Default Title"],"price":656477,"weight":32000,"compare_at_price":698380,"inventory_quantity":49,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/965_720_B_1_2f6087a6-67e1-4800-9b61-2da0323d4d8b.jpg?v=1710151802"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/965_720_B_1_2f6087a6-67e1-4800-9b61-2da0323d4d8b.jpg?v=1710151802","options":["Title"],"media":[{"alt":"Cusco Japan Super Charger Kit - Toyota - 86 ZN6","id":22805867823286,"position":1,"preview_image":{"aspect_ratio":1.333,"height":600,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/965_720_B_1_2f6087a6-67e1-4800-9b61-2da0323d4d8b.jpg?v=1710151802"},"aspect_ratio":1.333,"height":600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/965_720_B_1_2f6087a6-67e1-4800-9b61-2da0323d4d8b.jpg?v=1710151802","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003eReference Number: 965 720 B\u003cbr\u003e\u003cbr\u003eThe Cusco Supercharger Kit was developed exclusively for the ultra high compression naturally aspirated FA20 engine to further enhance the responsiveness and torque to match that of a 3.0 liter engine.\u003cbr\u003eThe end result is a Supercharger Kit that is completely bolt-on developed by using a highly efficient Sprintex unit as a base along with Cusco's product engineering knowledge. \u003cbr\u003e\u003cbr\u003eIncreased torque similar to that of a 3.0 liter engine\u003cbr\u003eTwin screw type supercharger\u003cbr\u003eIntercooled \u0026amp; Non-intercooled kits available\u003cbr\u003eCompletely bolt-on. No modifications necessary. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePower Data\u003cbr\u003eOver a 30% increase in power output as compared to factory figures with a plentiful torque band that is usable in a dynamic range of conditions.\u003cbr\u003e\u003cbr\u003eCusco Supercharger Kit (Intercooled)\u003cbr\u003ePeak Power: 208PS\/7400rpm - 32.4% gain over factory\u003cbr\u003ePeak Torque: 24.6kg-m\/5600rpm - 43.0% gain over factory\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eECU modification not included with kit\u003cbr\u003eECU MAP calibration (fuel, ignition) required after installation. May require additional components depending on varying conditions of vehicle setup. (Please inquire within for more details)\u003cbr\u003e\u003cbr\u003ePressure sensor included with kit (replaces factory unit)\u003cbr\u003e\u003cbr\u003eKit contents:\u003cbr\u003eSupercharger Body (Intake manifold design)\u003cbr\u003eInlet pipe\u003cbr\u003eSilicone band\u003cbr\u003eThrottle body extension wiring\u003cbr\u003eAir pressure sensor assembly\u003cbr\u003eAir pressure sensor extension connector\u003cbr\u003eIdle pulley\u003cbr\u003eDrive belt (6PK-2615)\u003cbr\u003eCap bolt M14xP1.5x40\u003cbr\u003eIdle pulley bracket\u003cbr\u003eO ring intake manifold assembly flange\u003cbr\u003eO ring throttle body assembly\u003cbr\u003eVacuum switching valve assembly\u003cbr\u003e Bolt clip\u003cbr\u003e\u003cbr\u003e0\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e86 | ZN6 (Spec A to E) | 2012-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e86 | ZN6 (Spec A to E) | 2012-2018 | NA | 4U-GSE | H4"}

{"id":7990496362678,"title":"HKS GTIII-RS Bolt-on Turbo kit with Cat extension - Toyota - 86 ZN6","handle":"hks-gtiii-rs-bolt-on-turbo-kit-with-cat-extension-zn6-11001-at005","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 11001-AT005\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThis bolt-on turbo kit incorporates HKS's attention to detail, including a specially designed turbo housing.\nIt is a new option for tuning the 86 turbocharger.\u003cbr\u003e\u003cbr\u003eKit contents\u003cbr\u003e\nDedicated GTIII-RS turbocharger assembly (including actuator)\u003cbr\u003e\nFront mounted intercooler and piping\u003cbr\u003e\nExhaust manifold, extension with catalyst\u003cbr\u003e\nPower flow and suction pipes\u003cbr\u003e\nOil and water piping parts\u003cbr\u003e\nDedicated heat shielding cover, heat shielding sheet\u003cbr\u003e\nGaskets, brackets, bolts, and other short parts\u003cbr\u003e\u003cbr\u003e\n?Notes\u003cbr\u003e\u003cbr\u003e\nIt is necessary to strengthen the fuel system, such as by installing injectors. Also, the control parts are not included in the kit, so please purchase them separately. It is also necessary to adjust the settings to suit the actual vehicle.\u003cbr\u003e\nThe torque characteristics will change significantly and slippage may occur, so please install a reinforced clutch.\u003cbr\u003e\nTo protect the engine, we strongly recommend installing an oil cooler.\u003cbr\u003e\nA separate pressure sensor is required.\u003cbr\u003e\nWhen installing the kit, modifications to the vehicle will be required.\u003cbr\u003e\nOnly the DBA-ZN6 M\/T GT\/GT Limited has obtained a vehicle emission test result certificate.\u003cbr\u003e\u003cbr\u003e\n? Features\u003cbr\u003e\nBased on the GTIII-RS, which is ideal for 2.0L class vehicles, it uses a specially designed compressor housing and turbo housing. When combined with a standard engine, it produces approximately 240kW (326ps).\n*Our internal data. Uses a large-capacity injector.\u003cbr\u003e\nThe exhaust manifold is a 4-in-1 type. The inside of the flexible pipe that releases vibrations is made of a spiral pipe made of high heat resistant material that does not cause exhaust resistance. The outer mesh is made of titanium material that is resistant to salt damage, improving durability. In addition, the engine side flange is welded from the inside to reduce exhaust resistance in various places.\u003cbr\u003e\nThe turbo side flange of the extension pipe has a stepped part where the pipe is inserted to eliminate the step on the pipe end. This, combined with the shape of the bypass pipe, reduces exhaust resistance. It is also equipped with a metal catalyzer, which is essential to clear safety standards.\u003cbr\u003e\nThe intercooler has a sufficient core size capacity (390 x 270 x 100) to reduce the intake temperature. In addition, an offset type tank shape is used considering the use of an oil cooler kit.\u003cbr\u003e\u003cbr\u003e\n \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e86 | ZN6 SPEC A | 2012-2013 | NA | 4U-GSE | H4,86 | ZN6 SPEC B | 2013-2014 | NA | 4U-GSE | H4,86 | ZN6 SPEC C | 2014-2015 | NA | 4U-GSE | H4,86 | ZN6 SPEC D | 2015-2016 | NA | 4U-GSE | H4,86 | ZN6 SPEC E | 2016-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e","published_at":"2024-06-12T14:12:50+08:00","created_at":"2024-06-12T14:11:00+08:00","vendor":"HKS","type":"Turbocharger Kits","tags":["2012","2013","2014","2015","2016","2017","2018","530000x20y1.1z0","86-zn6-spec-b-2013-2014-na-4u-gse-h4","86-zn6-spec-c-2014-2015-na-4u-gse-h4","86-zn6-spec-d-2015-2016-na-4u-gse-h4","86-zn6-spec-e-2016-2018-na-4u-gse-h4","CTA733","forced-induction","hks","jp1","toyota","turbocharger-kits","ws120","ZN6"],"price":473620,"price_min":473620,"price_max":473620,"available":true,"price_varies":false,"compare_at_price":557200,"compare_at_price_min":557200,"compare_at_price_max":557200,"compare_at_price_varies":false,"variants":[{"id":43253477900470,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"11001-AT005","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS GTIII-RS Bolt-on Turbo kit with Cat extension - Toyota - 86 ZN6","public_title":null,"options":["Default Title"],"price":473620,"weight":56000,"compare_at_price":557200,"inventory_quantity":49,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/11001-AT005-1_37cc7c19-4b3b-454a-ac28-9fbb5140c52b.jpg?v=1723092199","\/\/rzcrewgarage.com\/cdn\/shop\/files\/Ucar9vH0g0MtthxUuPNGQCE9Lp5lqRo2yEMvtl0c_6442c1ce-120f-4b6e-89cb-26e1a5260137.jpg?v=1723092201","\/\/rzcrewgarage.com\/cdn\/shop\/files\/11001-AT005-2_c06d9a62-0fae-42f2-8e50-9c4f4a0c205d.jpg?v=1723092203","\/\/rzcrewgarage.com\/cdn\/shop\/files\/9DMQ5wIjpXVBujTgIIhdt5rA5xwj6jOyI6Ku2iBU_2b5e73d0-b03c-4745-abcc-e17d2401b98f.gif?v=1718172660"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/11001-AT005-1_37cc7c19-4b3b-454a-ac28-9fbb5140c52b.jpg?v=1723092199","options":["Title"],"media":[{"alt":"HKS GTIII-RS Bolt-on Turbo kit with Cat extension - Toyota - 86 ZN6","id":28023732863158,"position":1,"preview_image":{"aspect_ratio":2.0,"height":300,"width":600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/11001-AT005-1_37cc7c19-4b3b-454a-ac28-9fbb5140c52b.jpg?v=1723092199"},"aspect_ratio":2.0,"height":300,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/11001-AT005-1_37cc7c19-4b3b-454a-ac28-9fbb5140c52b.jpg?v=1723092199","width":600},{"alt":"HKS GTIII-RS Bolt-on Turbo kit with Cat extension - Toyota - 86 ZN6","id":28023732895926,"position":2,"preview_image":{"aspect_ratio":1.336,"height":211,"width":282,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Ucar9vH0g0MtthxUuPNGQCE9Lp5lqRo2yEMvtl0c_6442c1ce-120f-4b6e-89cb-26e1a5260137.jpg?v=1723092201"},"aspect_ratio":1.336,"height":211,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Ucar9vH0g0MtthxUuPNGQCE9Lp5lqRo2yEMvtl0c_6442c1ce-120f-4b6e-89cb-26e1a5260137.jpg?v=1723092201","width":282},{"alt":"HKS GTIII-RS Bolt-on Turbo kit with Cat extension - Toyota - 86 ZN6","id":28023732928694,"position":3,"preview_image":{"aspect_ratio":1.333,"height":240,"width":320,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/11001-AT005-2_c06d9a62-0fae-42f2-8e50-9c4f4a0c205d.jpg?v=1723092203"},"aspect_ratio":1.333,"height":240,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/11001-AT005-2_c06d9a62-0fae-42f2-8e50-9c4f4a0c205d.jpg?v=1723092203","width":320},{"alt":"HKS GTIII-RS Bolt-on Turbo kit with Cat extension - Toyota - 86 ZN6","id":28023732961462,"position":4,"preview_image":{"aspect_ratio":1.309,"height":489,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/9DMQ5wIjpXVBujTgIIhdt5rA5xwj6jOyI6Ku2iBU_2b5e73d0-b03c-4745-abcc-e17d2401b98f.gif?v=1718172660"},"aspect_ratio":1.309,"height":489,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/9DMQ5wIjpXVBujTgIIhdt5rA5xwj6jOyI6Ku2iBU_2b5e73d0-b03c-4745-abcc-e17d2401b98f.gif?v=1718172660","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 11001-AT005\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThis bolt-on turbo kit incorporates HKS's attention to detail, including a specially designed turbo housing.\nIt is a new option for tuning the 86 turbocharger.\u003cbr\u003e\u003cbr\u003eKit contents\u003cbr\u003e\nDedicated GTIII-RS turbocharger assembly (including actuator)\u003cbr\u003e\nFront mounted intercooler and piping\u003cbr\u003e\nExhaust manifold, extension with catalyst\u003cbr\u003e\nPower flow and suction pipes\u003cbr\u003e\nOil and water piping parts\u003cbr\u003e\nDedicated heat shielding cover, heat shielding sheet\u003cbr\u003e\nGaskets, brackets, bolts, and other short parts\u003cbr\u003e\u003cbr\u003e\n?Notes\u003cbr\u003e\u003cbr\u003e\nIt is necessary to strengthen the fuel system, such as by installing injectors. Also, the control parts are not included in the kit, so please purchase them separately. It is also necessary to adjust the settings to suit the actual vehicle.\u003cbr\u003e\nThe torque characteristics will change significantly and slippage may occur, so please install a reinforced clutch.\u003cbr\u003e\nTo protect the engine, we strongly recommend installing an oil cooler.\u003cbr\u003e\nA separate pressure sensor is required.\u003cbr\u003e\nWhen installing the kit, modifications to the vehicle will be required.\u003cbr\u003e\nOnly the DBA-ZN6 M\/T GT\/GT Limited has obtained a vehicle emission test result certificate.\u003cbr\u003e\u003cbr\u003e\n? Features\u003cbr\u003e\nBased on the GTIII-RS, which is ideal for 2.0L class vehicles, it uses a specially designed compressor housing and turbo housing. When combined with a standard engine, it produces approximately 240kW (326ps).\n*Our internal data. Uses a large-capacity injector.\u003cbr\u003e\nThe exhaust manifold is a 4-in-1 type. The inside of the flexible pipe that releases vibrations is made of a spiral pipe made of high heat resistant material that does not cause exhaust resistance. The outer mesh is made of titanium material that is resistant to salt damage, improving durability. In addition, the engine side flange is welded from the inside to reduce exhaust resistance in various places.\u003cbr\u003e\nThe turbo side flange of the extension pipe has a stepped part where the pipe is inserted to eliminate the step on the pipe end. This, combined with the shape of the bypass pipe, reduces exhaust resistance. It is also equipped with a metal catalyzer, which is essential to clear safety standards.\u003cbr\u003e\nThe intercooler has a sufficient core size capacity (390 x 270 x 100) to reduce the intake temperature. In addition, an offset type tank shape is used considering the use of an oil cooler kit.\u003cbr\u003e\u003cbr\u003e\n \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e86 | ZN6 SPEC A | 2012-2013 | NA | 4U-GSE | H4,86 | ZN6 SPEC B | 2013-2014 | NA | 4U-GSE | H4,86 | ZN6 SPEC C | 2014-2015 | NA | 4U-GSE | H4,86 | ZN6 SPEC D | 2015-2016 | NA | 4U-GSE | H4,86 | ZN6 SPEC E | 2016-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e"}

{"id":7990496428214,"title":"HKS GTIII-RS Bolt-on Turbo kit with CAT less extension - Toyota - 86 ZN6","handle":"hks-gtiii-rs-bolt-on-turbo-kit-with-cat-less-extension-zn6-11001-kt001","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 11001-KT001\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThis bolt-on turbo kit incorporates HKS's attention to detail, including a specially designed turbo housing.\nIt is a new option for tuning the 86 turbocharger.\u003cbr\u003e\u003cbr\u003eKit contents\u003cbr\u003e\nDedicated GTIII-RS turbocharger assembly (including actuator)\u003cbr\u003e\nFront mounted intercooler and piping\u003cbr\u003e\nExhaust manifold, extension without catalyst\u003cbr\u003e\nPower flow and suction pipes\u003cbr\u003e\nOil and water piping parts\u003cbr\u003e\nDedicated heat shielding cover, heat shielding sheet\u003cbr\u003e\nGaskets, brackets, bolts, and other short parts\u003cbr\u003e\u003cbr\u003e\n?Notes\u003cbr\u003e\u003cbr\u003e\nIt is necessary to strengthen the fuel system, such as by installing injectors. Also, the control parts are not included in the kit, so please purchase them separately. It is also necessary to adjust the settings to suit the actual vehicle.\u003cbr\u003e\nThe torque characteristics will change significantly and slippage may occur, so please install a reinforced clutch.\u003cbr\u003e\nTo protect the engine, we strongly recommend installing an oil cooler.\u003cbr\u003e\nA separate pressure sensor is required.\u003cbr\u003e\nWhen installing the kit, modifications to the vehicle will be required.\u003cbr\u003e\nOnly the DBA-ZN6 M\/T GT\/GT Limited has obtained a vehicle emission test result certificate.\u003cbr\u003e\u003cbr\u003e\n? Features\u003cbr\u003e\nBased on the GTIII-RS, which is ideal for 2.0L class vehicles, it uses a specially designed compressor housing and turbo housing. When combined with a standard engine, it produces approximately 240kW (326ps).\n*Our internal data. Uses a large-capacity injector.\u003cbr\u003e\nThe exhaust manifold is a 4-in-1 type. The inside of the flexible pipe that releases vibrations is made of a spiral pipe made of high heat resistant material that does not cause exhaust resistance. The outer mesh is made of titanium material that is resistant to salt damage, improving durability. In addition, the engine side flange is welded from the inside to reduce exhaust resistance in various places.\u003cbr\u003e\nThe turbo side flange of the extension pipe has a stepped part where the pipe is inserted to eliminate the step on the pipe end. This, combined with the shape of the bypass pipe, reduces exhaust resistance. It is also equipped with a metal catalyzer, which is essential to clear safety standards.\u003cbr\u003e\nThe intercooler has a sufficient core size capacity (390 x 270 x 100) to reduce the intake temperature. In addition, an offset type tank shape is used considering the use of an oil cooler kit.\u003cbr\u003e\u003cbr\u003e\n \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e86 | ZN6 SPEC A | 2012-2013 | NA | 4U-GSE | H4,86 | ZN6 SPEC B | 2013-2014 | NA | 4U-GSE | H4,86 | ZN6 SPEC C | 2014-2015 | NA | 4U-GSE | H4,86 | ZN6 SPEC D | 2015-2016 | NA | 4U-GSE | H4,86 | ZN6 SPEC E | 2016-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e","published_at":"2024-06-12T14:13:02+08:00","created_at":"2024-06-12T14:11:06+08:00","vendor":"HKS","type":"Turbocharger Kits","tags":["2012","2013","2014","2015","2016","2017","2018","480000x20y1.1z0","86-zn6-spec-b-2013-2014-na-4u-gse-h4","86-zn6-spec-c-2014-2015-na-4u-gse-h4","86-zn6-spec-d-2015-2016-na-4u-gse-h4","86-zn6-spec-e-2016-2018-na-4u-gse-h4","CTA733","forced-induction","hks","jp1","toyota","turbocharger-kits","ws120","ZN6"],"price":428995,"price_min":428995,"price_max":428995,"available":true,"price_varies":false,"compare_at_price":504700,"compare_at_price_min":504700,"compare_at_price_max":504700,"compare_at_price_varies":false,"variants":[{"id":43253477966006,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"11001-KT001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS GTIII-RS Bolt-on Turbo kit with CAT less extension - Toyota - 86 ZN6","public_title":null,"options":["Default Title"],"price":428995,"weight":52000,"compare_at_price":504700,"inventory_quantity":49,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/II8fYvSOrphqM16wWzRSjUp1zlAdlulyrQ3KMDup_d7a022fa-fbee-453d-b644-4d37b2e10005.jpg?v=1723092196","\/\/rzcrewgarage.com\/cdn\/shop\/files\/11001-AT005-2_8ed4613c-4403-45d5-b08d-6f3c6453991c.jpg?v=1723092197","\/\/rzcrewgarage.com\/cdn\/shop\/files\/11001-AT005-3_bf71b6db-6f5f-4971-8668-334336bd393a.gif?v=1718172666"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/II8fYvSOrphqM16wWzRSjUp1zlAdlulyrQ3KMDup_d7a022fa-fbee-453d-b644-4d37b2e10005.jpg?v=1723092196","options":["Title"],"media":[{"alt":"HKS GTIII-RS Bolt-on Turbo kit with CAT less extension - Toyota - 86 ZN6","id":28023733551286,"position":1,"preview_image":{"aspect_ratio":1.923,"height":312,"width":600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/II8fYvSOrphqM16wWzRSjUp1zlAdlulyrQ3KMDup_d7a022fa-fbee-453d-b644-4d37b2e10005.jpg?v=1723092196"},"aspect_ratio":1.923,"height":312,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/II8fYvSOrphqM16wWzRSjUp1zlAdlulyrQ3KMDup_d7a022fa-fbee-453d-b644-4d37b2e10005.jpg?v=1723092196","width":600},{"alt":"HKS GTIII-RS Bolt-on Turbo kit with CAT less extension - Toyota - 86 ZN6","id":28023733584054,"position":2,"preview_image":{"aspect_ratio":1.333,"height":240,"width":320,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/11001-AT005-2_8ed4613c-4403-45d5-b08d-6f3c6453991c.jpg?v=1723092197"},"aspect_ratio":1.333,"height":240,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/11001-AT005-2_8ed4613c-4403-45d5-b08d-6f3c6453991c.jpg?v=1723092197","width":320},{"alt":"HKS GTIII-RS Bolt-on Turbo kit with CAT less extension - Toyota - 86 ZN6","id":28023733616822,"position":3,"preview_image":{"aspect_ratio":1.133,"height":565,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/11001-AT005-3_bf71b6db-6f5f-4971-8668-334336bd393a.gif?v=1718172666"},"aspect_ratio":1.133,"height":565,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/11001-AT005-3_bf71b6db-6f5f-4971-8668-334336bd393a.gif?v=1718172666","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 11001-KT001\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThis bolt-on turbo kit incorporates HKS's attention to detail, including a specially designed turbo housing.\nIt is a new option for tuning the 86 turbocharger.\u003cbr\u003e\u003cbr\u003eKit contents\u003cbr\u003e\nDedicated GTIII-RS turbocharger assembly (including actuator)\u003cbr\u003e\nFront mounted intercooler and piping\u003cbr\u003e\nExhaust manifold, extension without catalyst\u003cbr\u003e\nPower flow and suction pipes\u003cbr\u003e\nOil and water piping parts\u003cbr\u003e\nDedicated heat shielding cover, heat shielding sheet\u003cbr\u003e\nGaskets, brackets, bolts, and other short parts\u003cbr\u003e\u003cbr\u003e\n?Notes\u003cbr\u003e\u003cbr\u003e\nIt is necessary to strengthen the fuel system, such as by installing injectors. Also, the control parts are not included in the kit, so please purchase them separately. It is also necessary to adjust the settings to suit the actual vehicle.\u003cbr\u003e\nThe torque characteristics will change significantly and slippage may occur, so please install a reinforced clutch.\u003cbr\u003e\nTo protect the engine, we strongly recommend installing an oil cooler.\u003cbr\u003e\nA separate pressure sensor is required.\u003cbr\u003e\nWhen installing the kit, modifications to the vehicle will be required.\u003cbr\u003e\nOnly the DBA-ZN6 M\/T GT\/GT Limited has obtained a vehicle emission test result certificate.\u003cbr\u003e\u003cbr\u003e\n? Features\u003cbr\u003e\nBased on the GTIII-RS, which is ideal for 2.0L class vehicles, it uses a specially designed compressor housing and turbo housing. When combined with a standard engine, it produces approximately 240kW (326ps).\n*Our internal data. Uses a large-capacity injector.\u003cbr\u003e\nThe exhaust manifold is a 4-in-1 type. The inside of the flexible pipe that releases vibrations is made of a spiral pipe made of high heat resistant material that does not cause exhaust resistance. The outer mesh is made of titanium material that is resistant to salt damage, improving durability. In addition, the engine side flange is welded from the inside to reduce exhaust resistance in various places.\u003cbr\u003e\nThe turbo side flange of the extension pipe has a stepped part where the pipe is inserted to eliminate the step on the pipe end. This, combined with the shape of the bypass pipe, reduces exhaust resistance. It is also equipped with a metal catalyzer, which is essential to clear safety standards.\u003cbr\u003e\nThe intercooler has a sufficient core size capacity (390 x 270 x 100) to reduce the intake temperature. In addition, an offset type tank shape is used considering the use of an oil cooler kit.\u003cbr\u003e\u003cbr\u003e\n \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e86 | ZN6 SPEC A | 2012-2013 | NA | 4U-GSE | H4,86 | ZN6 SPEC B | 2013-2014 | NA | 4U-GSE | H4,86 | ZN6 SPEC C | 2014-2015 | NA | 4U-GSE | H4,86 | ZN6 SPEC D | 2015-2016 | NA | 4U-GSE | H4,86 | ZN6 SPEC E | 2016-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e"}

{"id":7272798879926,"title":"Vibrant 2in HD Clamp System Assembly - Anodized Black","handle":"vibrant-2in-hd-clamp-system-assembly-anodized-black-12513","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Vibrant\u003cbr\u003eReference Number: 12513\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eVibrant Performance Clamping Systems are constructed entirely from 6061 aluminum and provide leak-free \"modular\" connections that are capable of withstanding up to 800psi of boost pressure and temperatures up to 400 deg F. The NEW HD Clamping System's robust billet aluminum design is ideal for race applications with highly advanced pressurized air applications and turbo intake charge piping. The existing VanJen Clamp is ideal for street applications where silicone couplers may not offer the best solution. Both clamps perform great and provide a professional show-like finish to your engine bay. They are available in diameters that support O.D. tubing ranging from 2\" to 4\". \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eUniversal\u003c!--split--\u003e","published_at":"2022-03-03T15:49:05+08:00","created_at":"2022-03-03T15:44:28+08:00","vendor":"Vibrant","type":"Intercooler Kits","tags":["0","159.99x41.8y1z0","1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","alfa-romeo","aston-martin","audi","bmw","chevrolet","citroen","CTOT14","daihatsu","ferrari","fiat","forced-induction","ford","honda","hyundai","intercooler-kits","kia","lexus","lotus","mazda","mercedes-benz","mini","mitsubishi","new","nissan","opel","peugeot","porsche","renault","seat","skoda","subaru","suzuki","toyota","US1","vibrant","volkswagen","volvo","ws128"],"price":16093,"price_min":16093,"price_max":16093,"available":true,"price_varies":false,"compare_at_price":20900,"compare_at_price_min":20900,"compare_at_price_max":20900,"compare_at_price_varies":false,"variants":[{"id":41264149823670,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"12513","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Vibrant 2in HD Clamp System Assembly - Anodized Black","public_title":null,"options":["Default Title"],"price":16093,"weight":4272,"compare_at_price":20900,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-2in-hd-clamp-system-assembly-anodized-black-rzcrew.jpg?v=1710320981"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-2in-hd-clamp-system-assembly-anodized-black-rzcrew.jpg?v=1710320981","options":["Title"],"media":[{"alt":"Vibrant 2in HD Clamp System Assembly - Anodized Black","id":24718881783990,"position":1,"preview_image":{"aspect_ratio":1.75,"height":240,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-2in-hd-clamp-system-assembly-anodized-black-rzcrew.jpg?v=1710320981"},"aspect_ratio":1.75,"height":240,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-2in-hd-clamp-system-assembly-anodized-black-rzcrew.jpg?v=1710320981","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Vibrant\u003cbr\u003eReference Number: 12513\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eVibrant Performance Clamping Systems are constructed entirely from 6061 aluminum and provide leak-free \"modular\" connections that are capable of withstanding up to 800psi of boost pressure and temperatures up to 400 deg F. The NEW HD Clamping System's robust billet aluminum design is ideal for race applications with highly advanced pressurized air applications and turbo intake charge piping. The existing VanJen Clamp is ideal for street applications where silicone couplers may not offer the best solution. Both clamps perform great and provide a professional show-like finish to your engine bay. They are available in diameters that support O.D. tubing ranging from 2\" to 4\". \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eUniversal\u003c!--split--\u003e"}

{"id":7272799109302,"title":"Vibrant HD Clamping System Assembly for 2in OD Tubing - Blue Clamp","handle":"vibrant-hd-clamping-system-assembly-for-2in-od-tubing-blue-clamp-12513b","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Vibrant\u003cbr\u003eReference Number: 12513B\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eVibrant Performance Clamping Systems are constructed entirely from 6061 aluminum and provide leak-free \"modular\" connections that are capable of withstanding up to 800psi of boost pressure and temperatures up to 400 deg F. The NEW HD Clamping System's robust billet aluminum design is ideal for race applications with highly advanced pressurized air applications and turbo intake charge piping. The existing VanJen Clamp is ideal for street applications where silicone couplers may not offer the best solution. Both clamps perform great and provide a professional show-like finish to your engine bay. They are available in diameters that support O.D. tubing ranging from 2\" to 4\". \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eUniversal\u003c!--split--\u003e","published_at":"2025-04-14T11:26:31+08:00","created_at":"2022-03-03T15:44:36+08:00","vendor":"Vibrant","type":"Intercooler Kits","tags":["0","159.99x41.8y1z0","1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","alfa-romeo","aston-martin","audi","bmw","chevrolet","citroen","CTOT14","daihatsu","ferrari","fiat","forced-induction","ford","honda","hyundai","intercooler-kits","kia","lexus","lotus","mazda","mercedes-benz","mini","mitsubishi","new","nissan","opel","peugeot","porsche","renault","seat","skoda","subaru","suzuki","toyota","US1","vibrant","volkswagen","volvo","ws128"],"price":16093,"price_min":16093,"price_max":16093,"available":true,"price_varies":false,"compare_at_price":20900,"compare_at_price_min":20900,"compare_at_price_max":20900,"compare_at_price_varies":false,"variants":[{"id":41264150053046,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"12513B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Vibrant HD Clamping System Assembly for 2in OD Tubing - Blue Clamp","public_title":null,"options":["Default Title"],"price":16093,"weight":4272,"compare_at_price":20900,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamping-system-assembly-for-2in-od-tubing-blue-clamp-rzcrew.jpg?v=1710320979"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamping-system-assembly-for-2in-od-tubing-blue-clamp-rzcrew.jpg?v=1710320979","options":["Title"],"media":[{"alt":"Vibrant HD Clamping System Assembly for 2in OD Tubing - Blue Clamp","id":24718882308278,"position":1,"preview_image":{"aspect_ratio":1.75,"height":240,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamping-system-assembly-for-2in-od-tubing-blue-clamp-rzcrew.jpg?v=1710320979"},"aspect_ratio":1.75,"height":240,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamping-system-assembly-for-2in-od-tubing-blue-clamp-rzcrew.jpg?v=1710320979","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Vibrant\u003cbr\u003eReference Number: 12513B\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eVibrant Performance Clamping Systems are constructed entirely from 6061 aluminum and provide leak-free \"modular\" connections that are capable of withstanding up to 800psi of boost pressure and temperatures up to 400 deg F. The NEW HD Clamping System's robust billet aluminum design is ideal for race applications with highly advanced pressurized air applications and turbo intake charge piping. The existing VanJen Clamp is ideal for street applications where silicone couplers may not offer the best solution. Both clamps perform great and provide a professional show-like finish to your engine bay. They are available in diameters that support O.D. tubing ranging from 2\" to 4\". \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eUniversal\u003c!--split--\u003e"}