2019

{"id":6267191754934,"title":"Recaro Japan - Base Frame Seat Rail Standard Left - Suzuki Spacia Custom MK53S (2017-2022)","handle":"recaro-japan-base-frame-seat-rail-standard-left-suzuki-spacia-custom-mk53s-2017-2022-2088-003-1","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator.Function of seat belt reminder loses on passenger seat. (Warning lights of the seat belt will not light.)Seating position: 9mm higher than the lowest height of OEM seat.(A case of New LX-F using middle position of 3 position baseframe. The height can be adjustable. 22mm higher than OEM seat or 4mm lower than OEM seat.) Seat offset is 0.(handle center). The length of slider is 20mm shorter than OEM slider.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. Attached a side airbag canceller. For 2WD \u0026amp; 4WD car. Optional equipment car is unconfirmed.\u003cbr\u003e- There is interference between seat backrest side and door trim..=\u0026gt;AM19 series TREND(a few mm). SP-#,Racer needs SP-G offset adapter (PN 1600094J).RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Spacia Custom - MK53S (2017-2022) R06A\u003c!--split--\u003e","published_at":"2021-02-16T20:51:59+08:00","created_at":"2021-02-16T20:51:59+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2017","2018","2019","2020","2021","2022","left","recaro-japan","seat-rails","spacia-custom-mk53s-2017-2022-na-r06a-i3","suzuki","ws10"],"price":24700,"price_min":24700,"price_max":24700,"available":true,"price_varies":false,"compare_at_price":23900,"compare_at_price_min":23900,"compare_at_price_max":23900,"compare_at_price_varies":false,"variants":[{"id":38045012983990,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2088.003.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Left - Suzuki Spacia Custom MK53S (2017-2022)","public_title":null,"options":["Default Title"],"price":24700,"weight":17000,"compare_at_price":23900,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-suzuki-spacia-custom-mk53s-2017-2022-rzcrew.jpg?v=1710326911"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-suzuki-spacia-custom-mk53s-2017-2022-rzcrew.jpg?v=1710326911","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Left - Suzuki Spacia Custom MK53S (2017-2022) - 2088.003.1 - Rzcrewgarage","id":22850255847606,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-suzuki-spacia-custom-mk53s-2017-2022-rzcrew.jpg?v=1710326911"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-suzuki-spacia-custom-mk53s-2017-2022-rzcrew.jpg?v=1710326911","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator.Function of seat belt reminder loses on passenger seat. (Warning lights of the seat belt will not light.)Seating position: 9mm higher than the lowest height of OEM seat.(A case of New LX-F using middle position of 3 position baseframe. The height can be adjustable. 22mm higher than OEM seat or 4mm lower than OEM seat.) Seat offset is 0.(handle center). The length of slider is 20mm shorter than OEM slider.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. Attached a side airbag canceller. For 2WD \u0026amp; 4WD car. Optional equipment car is unconfirmed.\u003cbr\u003e- There is interference between seat backrest side and door trim..=\u0026gt;AM19 series TREND(a few mm). SP-#,Racer needs SP-G offset adapter (PN 1600094J).RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Spacia Custom - MK53S (2017-2022) R06A\u003c!--split--\u003e"}

{"id":6267194146998,"title":"Recaro Japan - Base Frame Seat Rail Standard Left - Suzuki Swift Sport ZC31S (2005-2019)","handle":"recaro-japan-base-frame-seat-rail-standard-left-suzuki-swift-sport-zc31s-2005-2019-2088-544-1","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(Middle position of 3 position baseframe with ST-JJ) 4mm to door from OEM seat.The length of slider is 15mm longer than OEM seat on front side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.2WD. 4WD. Attached a side airbag canceller.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Swift Sport - ZC31S (2007-2009) M16A\u003cbr\u003eSuzuki - Swift Sport - ZC31S (2009-2019) M16A\u003cbr\u003eSuzuki - Swift Sport - ZC31S (2005-2007) M16A\u003c!--split--\u003e","published_at":"2021-02-16T20:52:54+08:00","created_at":"2021-02-16T20:52:54+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","2019","left","recaro-japan","seat-rails","suzuki","swift-sport-zc31s-2004-2010-na-m16a-i4","ws10"],"price":24700,"price_min":24700,"price_max":24700,"available":true,"price_varies":false,"compare_at_price":23900,"compare_at_price_min":23900,"compare_at_price_max":23900,"compare_at_price_varies":false,"variants":[{"id":38045015769270,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2088.544.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Left - Suzuki Swift Sport ZC31S (2005-2019)","public_title":null,"options":["Default Title"],"price":24700,"weight":17000,"compare_at_price":23900,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-suzuki-swift-sport-zc31s-2005-2019-rzcrew.jpg?v=1710326885"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-suzuki-swift-sport-zc31s-2005-2019-rzcrew.jpg?v=1710326885","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Left - Suzuki Swift Sport ZC31S (2005-2019) - 2088.544.1 - Rzcrewgarage","id":22850260402358,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-suzuki-swift-sport-zc31s-2005-2019-rzcrew.jpg?v=1710326885"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-suzuki-swift-sport-zc31s-2005-2019-rzcrew.jpg?v=1710326885","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(Middle position of 3 position baseframe with ST-JJ) 4mm to door from OEM seat.The length of slider is 15mm longer than OEM seat on front side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.2WD. 4WD. Attached a side airbag canceller.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Swift Sport - ZC31S (2007-2009) M16A\u003cbr\u003eSuzuki - Swift Sport - ZC31S (2009-2019) M16A\u003cbr\u003eSuzuki - Swift Sport - ZC31S (2005-2007) M16A\u003c!--split--\u003e"}

{"id":6267194409142,"title":"Recaro Japan - Base Frame Seat Rail Standard Left - Suzuki Swift Sport ZC33S (2017-2020)","handle":"recaro-japan-base-frame-seat-rail-standard-left-suzuki-swift-sport-zc33s-2017-2020-2088-004-1","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. \u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- The side airbag function with a built-in genuine seat will be lost. Vehicles equipped with side airbags need to turn off the airbag warning light. When the RECARO seat is attached to the passenger seat, the occupant detection sensor will not function and the warning light on the seat belt will not light up. The seating position is about 18mm higher than the lowermost position of the genuine seat height adjustment function at the standard position with the attached 20mm (6 + 7 + 7mm) spacer. (When using New LX-F). The steering wheel offset is from the steering wheel center, and RECARO is about 7mm closer to the door side (3mm door side than the genuine seat). The amount of seat slide is reduced by about 20 mm compared to the genuine product.\u003cbr\u003e\u003cbr\u003eThe console and seat cushion interfere with each other in the front position of the seat slide. SPORT and Orthopedo are about 5mm. SP- # and racer require SP-G offset adapter set (6600 yen \u003cproduct number\u003e). Adjust the RMS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold side adapter for RMS. Also, if there is interference with the interior, it can be alleviated by adjustment. Adjust the RCS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold RCS side adapter. Adjust the RMS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold side adapter for RMS. Also, if there is interference with the interior, it can be alleviated by adjustment. Adjust the RCS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold RCS side adapter.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- CSE: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- CT: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- C-Classic: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Swift Sport - ZC33S (2017-2018) K14C\u003cbr\u003eSuzuki - Swift Sport - ZC33S (2017-2020) K14C\u003c!--split--\u003e\u003c\/product\u003e","published_at":"2021-02-16T20:53:01+08:00","created_at":"2021-02-16T20:53:02+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2017","2018","2019","2020","left","recaro-japan","seat-rails","suzuki","swift-sport-zc33s-2017-2018-tc-k14c-i4","ws10"],"price":24700,"price_min":24700,"price_max":24700,"available":true,"price_varies":false,"compare_at_price":23900,"compare_at_price_min":23900,"compare_at_price_max":23900,"compare_at_price_varies":false,"variants":[{"id":38045016031414,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2088.004.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Left - Suzuki Swift Sport ZC33S (2017-2020)","public_title":null,"options":["Default Title"],"price":24700,"weight":17000,"compare_at_price":23900,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-suzuki-swift-sport-zc33s-2017-2020-rzcrew.jpg?v=1710326883"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-suzuki-swift-sport-zc33s-2017-2020-rzcrew.jpg?v=1710326883","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Left - Suzuki Swift Sport ZC33S (2017-2020) - 2088.004.1 - Rzcrewgarage","id":22850260959414,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-suzuki-swift-sport-zc33s-2017-2020-rzcrew.jpg?v=1710326883"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-suzuki-swift-sport-zc33s-2017-2020-rzcrew.jpg?v=1710326883","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. \u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- The side airbag function with a built-in genuine seat will be lost. Vehicles equipped with side airbags need to turn off the airbag warning light. When the RECARO seat is attached to the passenger seat, the occupant detection sensor will not function and the warning light on the seat belt will not light up. The seating position is about 18mm higher than the lowermost position of the genuine seat height adjustment function at the standard position with the attached 20mm (6 + 7 + 7mm) spacer. (When using New LX-F). The steering wheel offset is from the steering wheel center, and RECARO is about 7mm closer to the door side (3mm door side than the genuine seat). The amount of seat slide is reduced by about 20 mm compared to the genuine product.\u003cbr\u003e\u003cbr\u003eThe console and seat cushion interfere with each other in the front position of the seat slide. SPORT and Orthopedo are about 5mm. SP- # and racer require SP-G offset adapter set (6600 yen \u003cproduct number\u003e). Adjust the RMS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold side adapter for RMS. Also, if there is interference with the interior, it can be alleviated by adjustment. Adjust the RCS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold RCS side adapter. Adjust the RMS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold side adapter for RMS. Also, if there is interference with the interior, it can be alleviated by adjustment. Adjust the RCS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold RCS side adapter.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- CSE: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- CT: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- C-Classic: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Swift Sport - ZC33S (2017-2018) K14C\u003cbr\u003eSuzuki - Swift Sport - ZC33S (2017-2020) K14C\u003c!--split--\u003e\u003c\/product\u003e"}

{"id":6267194474678,"title":"Recaro Japan - Base Frame Seat Rail Standard Left - Suzuki Swift ZC13S\/ZC53S\/ZC83S (2016-2021)","handle":"recaro-japan-base-frame-seat-rail-standard-left-suzuki-swift-zc13s-zc53s-zc83s-2016-2021-2088-004-1","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. \u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- The side airbag function with a built-in genuine seat will be lost. Vehicles equipped with side airbags need to turn off the airbag warning light. When the RECARO seat is attached to the passenger seat, the occupant detection sensor will not function and the warning light on the seat belt will not light up. The seating position is about 18mm higher than the lowermost position of the genuine seat height adjustment function at the standard position with the attached 20mm (6 + 7 + 7mm) spacer. (When using New LX-F). The steering wheel offset is from the steering wheel center, and RECARO is about 7mm closer to the door side (3mm door side than the genuine seat). The amount of seat slide is reduced by about 20 mm compared to the genuine product.\u003cbr\u003e\u003cbr\u003eThe console and seat cushion interfere with each other in the front position of the seat slide. SPORT and Orthopedo are about 5mm. SP- # and racer require SP-G offset adapter set (6600 yen \u003cproduct number\u003e). Adjust the RMS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold side adapter for RMS. Also, if there is interference with the interior, it can be alleviated by adjustment. Adjust the RCS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold RCS side adapter. Adjust the RMS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold side adapter for RMS. Also, if there is interference with the interior, it can be alleviated by adjustment. Adjust the RCS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold RCS side adapter.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- CSE: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- CT: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- C-Classic: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Swift - ZC13S (2016-2021) K10C\u003cbr\u003eSuzuki - Swift - ZC53S (2016-2021) K12C\u003cbr\u003eSuzuki - Swift - ZC83S (2016-2021) K12C\u003c!--split--\u003e\u003c\/product\u003e","published_at":"2021-02-16T20:53:03+08:00","created_at":"2021-02-16T20:53:03+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2016","2017","2018","2019","2020","2021","left","recaro-japan","seat-rails","suzuki","swift-zc13s-2016-2021-tc-k10c-i4","swift-zc53s-2016-2021-h-k12c-i4","swift-zc83s-2016-2021-h-k12c-i4","ws10"],"price":24700,"price_min":24700,"price_max":24700,"available":true,"price_varies":false,"compare_at_price":23900,"compare_at_price_min":23900,"compare_at_price_max":23900,"compare_at_price_varies":false,"variants":[{"id":38045016064182,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2088.004.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Left - Suzuki Swift ZC13S\/ZC53S\/ZC83S (2016-2021)","public_title":null,"options":["Default Title"],"price":24700,"weight":17000,"compare_at_price":23900,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-suzuki-swift-zc13szc53szc83s-2016-2021-rzcrew.jpg?v=1710326881"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-suzuki-swift-zc13szc53szc83s-2016-2021-rzcrew.jpg?v=1710326881","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Left - Suzuki Swift ZC13S\/ZC53S\/ZC83S (2016-2021) - 2088.004.1 - Rzcrewgarage","id":22850261024950,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-suzuki-swift-zc13szc53szc83s-2016-2021-rzcrew.jpg?v=1710326881"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-suzuki-swift-zc13szc53szc83s-2016-2021-rzcrew.jpg?v=1710326881","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. \u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- The side airbag function with a built-in genuine seat will be lost. Vehicles equipped with side airbags need to turn off the airbag warning light. When the RECARO seat is attached to the passenger seat, the occupant detection sensor will not function and the warning light on the seat belt will not light up. The seating position is about 18mm higher than the lowermost position of the genuine seat height adjustment function at the standard position with the attached 20mm (6 + 7 + 7mm) spacer. (When using New LX-F). The steering wheel offset is from the steering wheel center, and RECARO is about 7mm closer to the door side (3mm door side than the genuine seat). The amount of seat slide is reduced by about 20 mm compared to the genuine product.\u003cbr\u003e\u003cbr\u003eThe console and seat cushion interfere with each other in the front position of the seat slide. SPORT and Orthopedo are about 5mm. SP- # and racer require SP-G offset adapter set (6600 yen \u003cproduct number\u003e). Adjust the RMS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold side adapter for RMS. Also, if there is interference with the interior, it can be alleviated by adjustment. Adjust the RCS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold RCS side adapter. Adjust the RMS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold side adapter for RMS. Also, if there is interference with the interior, it can be alleviated by adjustment. Adjust the RCS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold RCS side adapter.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- CSE: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- CT: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- C-Classic: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Swift - ZC13S (2016-2021) K10C\u003cbr\u003eSuzuki - Swift - ZC53S (2016-2021) K12C\u003cbr\u003eSuzuki - Swift - ZC83S (2016-2021) K12C\u003c!--split--\u003e\u003c\/product\u003e"}

{"id":6267194015926,"title":"Recaro Japan - Base Frame Seat Rail Standard Left - Suzuki Swift ZC72S\/ZD72S (2009-2021)","handle":"recaro-japan-base-frame-seat-rail-standard-left-suzuki-swift-zc72s-zd72s-2009-2021-2088-543-1","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position:5mm higher than lowest position of OEM seat.(Middle position of 3 position baseframe with ST-JJ)（(A case of Style-JJ,the spacer use 19mm.)5mm to door from OEM seat.The length of slider is 20mm shorter than OEM seat on front side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. Swift Sport Manual car（In the case of CVT, please refer to the page of the ZC \/ ZD72) For non-side airbag car only. 2WD only. . If your car has the Optional center console,RECARO Armrest cannot be installed Accessories and the navigation unit are unconfirmed.\u003cbr\u003e- Only manual shift car of SWIFT SPORT is confirmed. Other cars:there is interference betwenn shif lever and seat cushion. RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Swift - ZC72S (2013-2018) K12B\u003cbr\u003eSuzuki - Swift - ZC72S (2009-2013) K12B\u003cbr\u003eSuzuki - Swift - ZD72S (2014-2021) K12B\u003c!--split--\u003e","published_at":"2021-02-16T20:52:50+08:00","created_at":"2021-02-16T20:52:51+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","2019","2020","2021","left","recaro-japan","seat-rails","suzuki","swift-zc72s-2010-2018-na-k12b-i4","swift-zd72s-2014-2021-na-k12b-i4","ws10"],"price":24700,"price_min":24700,"price_max":24700,"available":true,"price_varies":false,"compare_at_price":23900,"compare_at_price_min":23900,"compare_at_price_max":23900,"compare_at_price_varies":false,"variants":[{"id":38045015670966,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2088.543.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Left - Suzuki Swift ZC72S\/ZD72S (2009-2021)","public_title":null,"options":["Default Title"],"price":24700,"weight":17000,"compare_at_price":23900,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-suzuki-swift-zc72szd72s-2009-2021-rzcrew.jpg?v=1710326885"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-suzuki-swift-zc72szd72s-2009-2021-rzcrew.jpg?v=1710326885","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Left - Suzuki Swift ZC72S\/ZD72S (2009-2021) - 2088.543.1 - Rzcrewgarage","id":22850260205750,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-suzuki-swift-zc72szd72s-2009-2021-rzcrew.jpg?v=1710326885"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-suzuki-swift-zc72szd72s-2009-2021-rzcrew.jpg?v=1710326885","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position:5mm higher than lowest position of OEM seat.(Middle position of 3 position baseframe with ST-JJ)（(A case of Style-JJ,the spacer use 19mm.)5mm to door from OEM seat.The length of slider is 20mm shorter than OEM seat on front side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. Swift Sport Manual car（In the case of CVT, please refer to the page of the ZC \/ ZD72) For non-side airbag car only. 2WD only. . If your car has the Optional center console,RECARO Armrest cannot be installed Accessories and the navigation unit are unconfirmed.\u003cbr\u003e- Only manual shift car of SWIFT SPORT is confirmed. Other cars:there is interference betwenn shif lever and seat cushion. RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Swift - ZC72S (2013-2018) K12B\u003cbr\u003eSuzuki - Swift - ZC72S (2009-2013) K12B\u003cbr\u003eSuzuki - Swift - ZD72S (2014-2021) K12B\u003c!--split--\u003e"}

{"id":6267191820470,"title":"Recaro Japan - Base Frame Seat Rail Standard Left - Suzuki Wagon R MH35S\/MH55S (2017-2021)","handle":"recaro-japan-base-frame-seat-rail-standard-left-suzuki-wagon-r-mh35s-mh55s-2017-2021-2088-003-1","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator.Function of seat belt reminder loses on passenger seat. (Warning lights of the seat belt will not light.)Seating position: 9mm higher than the lowest height of OEM seat.(A case of New LX-F using middle position of 3 position baseframe. The height can be adjustable. 22mm higher than OEM seat or 4mm lower than OEM seat.) Seat offset is 0.(handle center). The length of slider is 20mm shorter than OEM slider.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. Attached a side airbag canceller. For 2WD \u0026amp; 4WD car. Optional equipment car is unconfirmed.\u003cbr\u003e- There is interference between seat backrest side and door trim..=\u0026gt;AM19 series TREND(a few mm). SP-#,Racer needs SP-G offset adapter (PN 1600094J).RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Wagon R - MH35S (2017-2021) R06A\u003cbr\u003eSuzuki - Wagon R - MH55S (2017-2021) R06A\u003c!--split--\u003e","published_at":"2021-02-16T20:52:00+08:00","created_at":"2021-02-16T20:52:00+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2017","2018","2019","2020","2021","left","recaro-japan","seat-rails","suzuki","wagon-r-mh35s-2017-2021-na-r06a-i3","wagon-r-mh55s-2017-2021-na-r06a-i3","ws10"],"price":24700,"price_min":24700,"price_max":24700,"available":true,"price_varies":false,"compare_at_price":23900,"compare_at_price_min":23900,"compare_at_price_max":23900,"compare_at_price_varies":false,"variants":[{"id":38045013049526,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2088.003.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Left - Suzuki Wagon R MH35S\/MH55S (2017-2021)","public_title":null,"options":["Default Title"],"price":24700,"weight":17000,"compare_at_price":23900,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-suzuki-wagon-r-mh35smh55s-2017-2021-rzcrew.jpg?v=1710326911"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-suzuki-wagon-r-mh35smh55s-2017-2021-rzcrew.jpg?v=1710326911","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Left - Suzuki Wagon R MH35S\/MH55S (2017-2021) - 2088.003.1 - Rzcrewgarage","id":22850255945910,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-suzuki-wagon-r-mh35smh55s-2017-2021-rzcrew.jpg?v=1710326911"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-suzuki-wagon-r-mh35smh55s-2017-2021-rzcrew.jpg?v=1710326911","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator.Function of seat belt reminder loses on passenger seat. (Warning lights of the seat belt will not light.)Seating position: 9mm higher than the lowest height of OEM seat.(A case of New LX-F using middle position of 3 position baseframe. The height can be adjustable. 22mm higher than OEM seat or 4mm lower than OEM seat.) Seat offset is 0.(handle center). The length of slider is 20mm shorter than OEM slider.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. Attached a side airbag canceller. For 2WD \u0026amp; 4WD car. Optional equipment car is unconfirmed.\u003cbr\u003e- There is interference between seat backrest side and door trim..=\u0026gt;AM19 series TREND(a few mm). SP-#,Racer needs SP-G offset adapter (PN 1600094J).RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Wagon R - MH35S (2017-2021) R06A\u003cbr\u003eSuzuki - Wagon R - MH55S (2017-2021) R06A\u003c!--split--\u003e"}

{"id":6267191853238,"title":"Recaro Japan - Base Frame Seat Rail Standard Left - Suzuki XBee MN71S (2017-2021)","handle":"recaro-japan-base-frame-seat-rail-standard-left-suzuki-xbee-mn71s-2017-2021-2088-003-1","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator.Function of seat belt reminder loses on passenger seat. (Warning lights of the seat belt will not light.)Seating position: 9mm higher than the lowest height of OEM seat.(A case of New LX-F using middle position of 3 position baseframe. The height can be adjustable. 22mm higher than OEM seat or 4mm lower than OEM seat.) Seat offset is 0.(handle center). The length of slider is 20mm shorter than OEM slider.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. Attached a side airbag canceller. For 2WD \u0026amp; 4WD car. Optional equipment car is unconfirmed.\u003cbr\u003e- There is interference between seat backrest side and door trim..=\u0026gt;AM19 series TREND(a few mm). SP-#,Racer needs SP-G offset adapter (PN 1600094J).RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - XBee - MN71S (2017-2021) K10C\u003c!--split--\u003e","published_at":"2021-02-16T20:52:01+08:00","created_at":"2021-02-16T20:52:02+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2017","2018","2019","2020","2021","left","recaro-japan","seat-rails","suzuki","ws10","xbee-mn71s-2016-2021-tc-k10c-i4"],"price":24700,"price_min":24700,"price_max":24700,"available":true,"price_varies":false,"compare_at_price":23900,"compare_at_price_min":23900,"compare_at_price_max":23900,"compare_at_price_varies":false,"variants":[{"id":38045013082294,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2088.003.1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Left - Suzuki XBee MN71S (2017-2021)","public_title":null,"options":["Default Title"],"price":24700,"weight":17000,"compare_at_price":23900,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-suzuki-xbee-mn71s-2017-2021-rzcrew.jpg?v=1710326902"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-suzuki-xbee-mn71s-2017-2021-rzcrew.jpg?v=1710326902","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Left - Suzuki XBee MN71S (2017-2021) - 2088.003.1 - Rzcrewgarage","id":22850255978678,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-suzuki-xbee-mn71s-2017-2021-rzcrew.jpg?v=1710326902"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-left-suzuki-xbee-mn71s-2017-2021-rzcrew.jpg?v=1710326902","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Left\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator.Function of seat belt reminder loses on passenger seat. (Warning lights of the seat belt will not light.)Seating position: 9mm higher than the lowest height of OEM seat.(A case of New LX-F using middle position of 3 position baseframe. The height can be adjustable. 22mm higher than OEM seat or 4mm lower than OEM seat.) Seat offset is 0.(handle center). The length of slider is 20mm shorter than OEM slider.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. Attached a side airbag canceller. For 2WD \u0026amp; 4WD car. Optional equipment car is unconfirmed.\u003cbr\u003e- There is interference between seat backrest side and door trim..=\u0026gt;AM19 series TREND(a few mm). SP-#,Racer needs SP-G offset adapter (PN 1600094J).RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - XBee - MN71S (2017-2021) K10C\u003c!--split--\u003e"}

{"id":6267192541366,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Jimny JB64W (2018-2021)","handle":"recaro-japan-base-frame-seat-rail-standard-right-suzuki-jimny-jb64w-2018-2021-2088-005-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator. Function of seat belt reminder loses on passenger seat. (Warning lights of the seat belt will not light.) Seating position: 6mm higher than OEM seat.(A case of New LX-F using middle position of 3 position baseframe. The height can be adjustable. 19mm higher than OEM seat or 7mm lower than OEM seat.) Seat offset is same as OEM seat. The length of slider is 20mm shorter than OEM slider.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. Attached a side airbag canceller. Optional equipment car is unconfirmed.\u003cbr\u003e- SP-#,Racer needs SP-G offset adapter (PN 1600094J). RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Jimny - JB64W (2018-2021) R06A\u003c!--split--\u003e","published_at":"2021-02-16T20:52:11+08:00","created_at":"2021-02-16T20:52:12+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2018","2019","2020","2021","jimny-jb64w-2018-2021-na-r06a-i3","recaro-japan","right","seat-rails","suzuki","ws10"],"price":24700,"price_min":24700,"price_max":24700,"available":true,"price_varies":false,"compare_at_price":23900,"compare_at_price_min":23900,"compare_at_price_max":23900,"compare_at_price_varies":false,"variants":[{"id":38045014393014,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2088.005.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Jimny JB64W (2018-2021)","public_title":null,"options":["Default Title"],"price":24700,"weight":17000,"compare_at_price":23900,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-jimny-jb64w-2018-2021-rzcrew.jpg?v=1710326901"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-jimny-jb64w-2018-2021-rzcrew.jpg?v=1710326901","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Jimny JB64W (2018-2021) - 2088.005.2 - Rzcrewgarage","id":22850256601270,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-jimny-jb64w-2018-2021-rzcrew.jpg?v=1710326901"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-jimny-jb64w-2018-2021-rzcrew.jpg?v=1710326901","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator. Function of seat belt reminder loses on passenger seat. (Warning lights of the seat belt will not light.) Seating position: 6mm higher than OEM seat.(A case of New LX-F using middle position of 3 position baseframe. The height can be adjustable. 19mm higher than OEM seat or 7mm lower than OEM seat.) Seat offset is same as OEM seat. The length of slider is 20mm shorter than OEM slider.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. Attached a side airbag canceller. Optional equipment car is unconfirmed.\u003cbr\u003e- SP-#,Racer needs SP-G offset adapter (PN 1600094J). RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Jimny - JB64W (2018-2021) R06A\u003c!--split--\u003e"}

{"id":6267192672438,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Jimny Sierra JB74W (2018-2021)","handle":"recaro-japan-base-frame-seat-rail-standard-right-suzuki-jimny-sierra-jb74w-2018-2021-2088-005-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator. Function of seat belt reminder loses on passenger seat. (Warning lights of the seat belt will not light.) Seating position: 6mm higher than OEM seat.(A case of New LX-F using middle position of 3 position baseframe. The height can be adjustable. 19mm higher than OEM seat or 7mm lower than OEM seat.) Seat offset is same as OEM seat. The length of slider is 20mm shorter than OEM slider.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. Attached a side airbag canceller. Optional equipment car is unconfirmed.\u003cbr\u003e- SP-#,Racer needs SP-G offset adapter (PN 1600094J). RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Jimny Sierra - JB74W (2018-2021) K15B\u003cbr\u003eSuzuki - Jimny Sierra - JB74W (2018-2021) K15B\u003c!--split--\u003e","published_at":"2021-02-16T20:52:12+08:00","created_at":"2021-02-16T20:52:13+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2018","2019","2020","2021","jimny-sierra-jb74w-2018-2021-na-k15b-i4","recaro-japan","right","seat-rails","suzuki","ws10"],"price":24700,"price_min":24700,"price_max":24700,"available":true,"price_varies":false,"compare_at_price":23900,"compare_at_price_min":23900,"compare_at_price_max":23900,"compare_at_price_varies":false,"variants":[{"id":38045014458550,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2088.005.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Jimny Sierra JB74W (2018-2021)","public_title":null,"options":["Default Title"],"price":24700,"weight":17000,"compare_at_price":23900,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-jimny-sierra-jb74w-2018-2021-rzcrew.jpg?v=1710326901"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-jimny-sierra-jb74w-2018-2021-rzcrew.jpg?v=1710326901","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Jimny Sierra JB74W (2018-2021) - 2088.005.2 - Rzcrewgarage","id":22850256830646,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-jimny-sierra-jb74w-2018-2021-rzcrew.jpg?v=1710326901"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-jimny-sierra-jb74w-2018-2021-rzcrew.jpg?v=1710326901","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator. Function of seat belt reminder loses on passenger seat. (Warning lights of the seat belt will not light.) Seating position: 6mm higher than OEM seat.(A case of New LX-F using middle position of 3 position baseframe. The height can be adjustable. 19mm higher than OEM seat or 7mm lower than OEM seat.) Seat offset is same as OEM seat. The length of slider is 20mm shorter than OEM slider.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. Attached a side airbag canceller. Optional equipment car is unconfirmed.\u003cbr\u003e- SP-#,Racer needs SP-G offset adapter (PN 1600094J). RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Jimny Sierra - JB74W (2018-2021) K15B\u003cbr\u003eSuzuki - Jimny Sierra - JB74W (2018-2021) K15B\u003c!--split--\u003e"}

{"id":6267192017078,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Solio MA26S\/MA36S\/MA46S (2015-2021)","handle":"recaro-japan-base-frame-seat-rail-standard-right-suzuki-solio-ma26s-ma36s-ma46s-2015-2021-2088-003-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator.Function of seat belt reminder loses on passenger seat. (Warning lights of the seat belt will not light.)Seating position: 9mm higher than the lowest height of OEM seat.(A case of New LX-F using middle position of 3 position baseframe. The height can be adjustable. 22mm higher than OEM seat or 4mm lower than OEM seat.) Seat offset is 0.(handle center). The length of slider is 20mm shorter than OEM slider.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. Attached a side airbag canceller. For 2WD \u0026amp; 4WD car. Optional equipment car is unconfirmed.\u003cbr\u003e- There is interference between seat backrest side and door trim..=\u0026gt;AM19 series TREND(a few mm). SP-#,Racer needs SP-G offset adapter (PN 1600094J).RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Solio - MA26S (2015-2021) K12C\u003cbr\u003eSuzuki - Solio - MA36S (2015-2021) K12C\u003cbr\u003eSuzuki - Solio - MA46S (2015-2021) K12C\u003c!--split--\u003e","published_at":"2021-02-16T20:52:04+08:00","created_at":"2021-02-16T20:52:04+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2015","2016","2017","2018","2019","2020","2021","recaro-japan","right","seat-rails","solio-ma26s-2015-2021-h-k12c-i4","solio-ma36s-2015-2021-h-k12c-i4","solio-ma46s-2015-2021-h-k12c-i4","suzuki","ws10"],"price":24700,"price_min":24700,"price_max":24700,"available":true,"price_varies":false,"compare_at_price":23900,"compare_at_price_min":23900,"compare_at_price_max":23900,"compare_at_price_varies":false,"variants":[{"id":38045014163638,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2088.003.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Solio MA26S\/MA36S\/MA46S (2015-2021)","public_title":null,"options":["Default Title"],"price":24700,"weight":17000,"compare_at_price":23900,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-solio-ma26sma36sma46s-2015-2021-rzcrew.jpg?v=1710326902"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-solio-ma26sma36sma46s-2015-2021-rzcrew.jpg?v=1710326902","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Solio MA26S\/MA36S\/MA46S (2015-2021) - 2088.003.2 - Rzcrewgarage","id":22850256175286,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-solio-ma26sma36sma46s-2015-2021-rzcrew.jpg?v=1710326902"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-solio-ma26sma36sma46s-2015-2021-rzcrew.jpg?v=1710326902","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator.Function of seat belt reminder loses on passenger seat. (Warning lights of the seat belt will not light.)Seating position: 9mm higher than the lowest height of OEM seat.(A case of New LX-F using middle position of 3 position baseframe. The height can be adjustable. 22mm higher than OEM seat or 4mm lower than OEM seat.) Seat offset is 0.(handle center). The length of slider is 20mm shorter than OEM slider.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. Attached a side airbag canceller. For 2WD \u0026amp; 4WD car. Optional equipment car is unconfirmed.\u003cbr\u003e- There is interference between seat backrest side and door trim..=\u0026gt;AM19 series TREND(a few mm). SP-#,Racer needs SP-G offset adapter (PN 1600094J).RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Solio - MA26S (2015-2021) K12C\u003cbr\u003eSuzuki - Solio - MA36S (2015-2021) K12C\u003cbr\u003eSuzuki - Solio - MA46S (2015-2021) K12C\u003c!--split--\u003e"}

{"id":6267192049846,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Spacia Custom MK53S (2017-2022)","handle":"recaro-japan-base-frame-seat-rail-standard-right-suzuki-spacia-custom-mk53s-2017-2022-2088-003-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator.Function of seat belt reminder loses on passenger seat. (Warning lights of the seat belt will not light.)Seating position: 9mm higher than the lowest height of OEM seat.(A case of New LX-F using middle position of 3 position baseframe. The height can be adjustable. 22mm higher than OEM seat or 4mm lower than OEM seat.) Seat offset is 0.(handle center). The length of slider is 20mm shorter than OEM slider.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. Attached a side airbag canceller. For 2WD \u0026amp; 4WD car. Optional equipment car is unconfirmed.\u003cbr\u003e- There is interference between seat backrest side and door trim..=\u0026gt;AM19 series TREND(a few mm). SP-#,Racer needs SP-G offset adapter (PN 1600094J).RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Spacia Custom - MK53S (2017-2022) R06A\u003c!--split--\u003e","published_at":"2021-02-16T20:52:05+08:00","created_at":"2021-02-16T20:52:05+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2017","2018","2019","2020","2021","2022","recaro-japan","right","seat-rails","spacia-custom-mk53s-2017-2022-na-r06a-i3","suzuki","ws10"],"price":24700,"price_min":24700,"price_max":24700,"available":true,"price_varies":false,"compare_at_price":23900,"compare_at_price_min":23900,"compare_at_price_max":23900,"compare_at_price_varies":false,"variants":[{"id":38045014196406,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2088.003.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Spacia Custom MK53S (2017-2022)","public_title":null,"options":["Default Title"],"price":24700,"weight":17000,"compare_at_price":23900,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-spacia-custom-mk53s-2017-2022-rzcrew.jpg?v=1710326902"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-spacia-custom-mk53s-2017-2022-rzcrew.jpg?v=1710326902","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Spacia Custom MK53S (2017-2022) - 2088.003.2 - Rzcrewgarage","id":22850256208054,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-spacia-custom-mk53s-2017-2022-rzcrew.jpg?v=1710326902"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-spacia-custom-mk53s-2017-2022-rzcrew.jpg?v=1710326902","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator.Function of seat belt reminder loses on passenger seat. (Warning lights of the seat belt will not light.)Seating position: 9mm higher than the lowest height of OEM seat.(A case of New LX-F using middle position of 3 position baseframe. The height can be adjustable. 22mm higher than OEM seat or 4mm lower than OEM seat.) Seat offset is 0.(handle center). The length of slider is 20mm shorter than OEM slider.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. Attached a side airbag canceller. For 2WD \u0026amp; 4WD car. Optional equipment car is unconfirmed.\u003cbr\u003e- There is interference between seat backrest side and door trim..=\u0026gt;AM19 series TREND(a few mm). SP-#,Racer needs SP-G offset adapter (PN 1600094J).RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Spacia Custom - MK53S (2017-2022) R06A\u003c!--split--\u003e"}

{"id":6267194278070,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Swift Sport ZC31S (2005-2019)","handle":"recaro-japan-base-frame-seat-rail-standard-right-suzuki-swift-sport-zc31s-2005-2019-2088-544-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(Middle position of 3 position baseframe with ST-JJ) 4mm to door from OEM seat.The length of slider is 15mm longer than OEM seat on front side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.2WD. 4WD. Attached a side airbag canceller.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Swift Sport - ZC31S (2007-2009) M16A\u003cbr\u003eSuzuki - Swift Sport - ZC31S (2009-2019) M16A\u003cbr\u003eSuzuki - Swift Sport - ZC31S (2005-2007) M16A\u003c!--split--\u003e","published_at":"2021-02-16T20:52:57+08:00","created_at":"2021-02-16T20:52:58+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","2019","recaro-japan","right","seat-rails","suzuki","swift-sport-zc31s-2004-2010-na-m16a-i4","ws10"],"price":24700,"price_min":24700,"price_max":24700,"available":true,"price_varies":false,"compare_at_price":23900,"compare_at_price_min":23900,"compare_at_price_max":23900,"compare_at_price_varies":false,"variants":[{"id":38045015900342,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2088.544.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Swift Sport ZC31S (2005-2019)","public_title":null,"options":["Default Title"],"price":24700,"weight":17000,"compare_at_price":23900,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-swift-sport-zc31s-2005-2019-rzcrew.jpg?v=1710326883"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-swift-sport-zc31s-2005-2019-rzcrew.jpg?v=1710326883","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Swift Sport ZC31S (2005-2019) - 2088.544.2 - Rzcrewgarage","id":22850260861110,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-swift-sport-zc31s-2005-2019-rzcrew.jpg?v=1710326883"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-swift-sport-zc31s-2005-2019-rzcrew.jpg?v=1710326883","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position: height is same as OEM seat.(Middle position of 3 position baseframe with ST-JJ) 4mm to door from OEM seat.The length of slider is 15mm longer than OEM seat on front side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.2WD. 4WD. Attached a side airbag canceller.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Swift Sport - ZC31S (2007-2009) M16A\u003cbr\u003eSuzuki - Swift Sport - ZC31S (2009-2019) M16A\u003cbr\u003eSuzuki - Swift Sport - ZC31S (2005-2007) M16A\u003c!--split--\u003e"}

{"id":6267194540214,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Swift Sport ZC33S (2017-2020)","handle":"recaro-japan-base-frame-seat-rail-standard-right-suzuki-swift-sport-zc33s-2017-2020-2088-004-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. \u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- The side airbag function with a built-in genuine seat will be lost. Vehicles equipped with side airbags need to turn off the airbag warning light. When the RECARO seat is attached to the passenger seat, the occupant detection sensor will not function and the warning light on the seat belt will not light up. The seating position is about 18mm higher than the lowermost position of the genuine seat height adjustment function at the standard position with the attached 20mm (6 + 7 + 7mm) spacer. (When using New LX-F). The steering wheel offset is from the steering wheel center, and RECARO is about 7mm closer to the door side (3mm door side than the genuine seat). The amount of seat slide is reduced by about 20 mm compared to the genuine product.\u003cbr\u003e\u003cbr\u003eThe console and seat cushion interfere with each other in the front position of the seat slide. SPORT and Orthopedo are about 5mm. SP- # and racer require SP-G offset adapter set (6600 yen \u003cproduct number\u003e). Adjust the RMS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold side adapter for RMS. Also, if there is interference with the interior, it can be alleviated by adjustment. Adjust the RCS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold RCS side adapter. Adjust the RMS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold side adapter for RMS. Also, if there is interference with the interior, it can be alleviated by adjustment. Adjust the RCS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold RCS side adapter.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- CSE: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- CT: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- C-Classic: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Swift Sport - ZC33S (2017-2018) K14C\u003cbr\u003eSuzuki - Swift Sport - ZC33S (2017-2020) K14C\u003c!--split--\u003e\u003c\/product\u003e","published_at":"2021-02-16T20:53:04+08:00","created_at":"2021-02-16T20:53:05+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2017","2018","2019","2020","recaro-japan","right","seat-rails","suzuki","swift-sport-zc33s-2017-2018-tc-k14c-i4","ws10"],"price":24700,"price_min":24700,"price_max":24700,"available":true,"price_varies":false,"compare_at_price":23900,"compare_at_price_min":23900,"compare_at_price_max":23900,"compare_at_price_varies":false,"variants":[{"id":38045016129718,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2088.004.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Swift Sport ZC33S (2017-2020)","public_title":null,"options":["Default Title"],"price":24700,"weight":17000,"compare_at_price":23900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-swift-sport-zc33s-2017-2020-rzcrew.jpg?v=1710326881"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-swift-sport-zc33s-2017-2020-rzcrew.jpg?v=1710326881","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Swift Sport ZC33S (2017-2020) - 2088.004.2 - Rzcrewgarage","id":22850261123254,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-swift-sport-zc33s-2017-2020-rzcrew.jpg?v=1710326881"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-swift-sport-zc33s-2017-2020-rzcrew.jpg?v=1710326881","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. \u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- The side airbag function with a built-in genuine seat will be lost. Vehicles equipped with side airbags need to turn off the airbag warning light. When the RECARO seat is attached to the passenger seat, the occupant detection sensor will not function and the warning light on the seat belt will not light up. The seating position is about 18mm higher than the lowermost position of the genuine seat height adjustment function at the standard position with the attached 20mm (6 + 7 + 7mm) spacer. (When using New LX-F). The steering wheel offset is from the steering wheel center, and RECARO is about 7mm closer to the door side (3mm door side than the genuine seat). The amount of seat slide is reduced by about 20 mm compared to the genuine product.\u003cbr\u003e\u003cbr\u003eThe console and seat cushion interfere with each other in the front position of the seat slide. SPORT and Orthopedo are about 5mm. SP- # and racer require SP-G offset adapter set (6600 yen \u003cproduct number\u003e). Adjust the RMS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold side adapter for RMS. Also, if there is interference with the interior, it can be alleviated by adjustment. Adjust the RCS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold RCS side adapter. Adjust the RMS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold side adapter for RMS. Also, if there is interference with the interior, it can be alleviated by adjustment. Adjust the RCS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold RCS side adapter.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- CSE: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- CT: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- C-Classic: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Swift Sport - ZC33S (2017-2018) K14C\u003cbr\u003eSuzuki - Swift Sport - ZC33S (2017-2020) K14C\u003c!--split--\u003e\u003c\/product\u003e"}

{"id":6267194572982,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Swift ZC13S\/ZC53S\/ZC83S (2016-2021)","handle":"recaro-japan-base-frame-seat-rail-standard-right-suzuki-swift-zc13s-zc53s-zc83s-2016-2021-2088-004-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. \u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- The side airbag function with a built-in genuine seat will be lost. Vehicles equipped with side airbags need to turn off the airbag warning light. When the RECARO seat is attached to the passenger seat, the occupant detection sensor will not function and the warning light on the seat belt will not light up. The seating position is about 18mm higher than the lowermost position of the genuine seat height adjustment function at the standard position with the attached 20mm (6 + 7 + 7mm) spacer. (When using New LX-F). The steering wheel offset is from the steering wheel center, and RECARO is about 7mm closer to the door side (3mm door side than the genuine seat). The amount of seat slide is reduced by about 20 mm compared to the genuine product.\u003cbr\u003e\u003cbr\u003eThe console and seat cushion interfere with each other in the front position of the seat slide. SPORT and Orthopedo are about 5mm. SP- # and racer require SP-G offset adapter set (6600 yen \u003cproduct number\u003e). Adjust the RMS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold side adapter for RMS. Also, if there is interference with the interior, it can be alleviated by adjustment. Adjust the RCS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold RCS side adapter. Adjust the RMS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold side adapter for RMS. Also, if there is interference with the interior, it can be alleviated by adjustment. Adjust the RCS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold RCS side adapter.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- CSE: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- CT: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- C-Classic: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Swift - ZC13S (2016-2021) K10C\u003cbr\u003eSuzuki - Swift - ZC53S (2016-2021) K12C\u003cbr\u003eSuzuki - Swift - ZC83S (2016-2021) K12C\u003c!--split--\u003e\u003c\/product\u003e","published_at":"2021-02-16T20:53:05+08:00","created_at":"2021-02-16T20:53:06+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2016","2017","2018","2019","2020","2021","recaro-japan","right","seat-rails","suzuki","swift-zc13s-2016-2021-tc-k10c-i4","swift-zc53s-2016-2021-h-k12c-i4","swift-zc83s-2016-2021-h-k12c-i4","ws10"],"price":24700,"price_min":24700,"price_max":24700,"available":true,"price_varies":false,"compare_at_price":23900,"compare_at_price_min":23900,"compare_at_price_max":23900,"compare_at_price_varies":false,"variants":[{"id":38045016195254,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2088.004.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Swift ZC13S\/ZC53S\/ZC83S (2016-2021)","public_title":null,"options":["Default Title"],"price":24700,"weight":17000,"compare_at_price":23900,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-swift-zc13szc53szc83s-2016-2021-rzcrew.jpg?v=1710326881"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-swift-zc13szc53szc83s-2016-2021-rzcrew.jpg?v=1710326881","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Swift ZC13S\/ZC53S\/ZC83S (2016-2021) - 2088.004.2 - Rzcrewgarage","id":22850261156022,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-swift-zc13szc53szc83s-2016-2021-rzcrew.jpg?v=1710326881"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-swift-zc13szc53szc83s-2016-2021-rzcrew.jpg?v=1710326881","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. \u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- The side airbag function with a built-in genuine seat will be lost. Vehicles equipped with side airbags need to turn off the airbag warning light. When the RECARO seat is attached to the passenger seat, the occupant detection sensor will not function and the warning light on the seat belt will not light up. The seating position is about 18mm higher than the lowermost position of the genuine seat height adjustment function at the standard position with the attached 20mm (6 + 7 + 7mm) spacer. (When using New LX-F). The steering wheel offset is from the steering wheel center, and RECARO is about 7mm closer to the door side (3mm door side than the genuine seat). The amount of seat slide is reduced by about 20 mm compared to the genuine product.\u003cbr\u003e\u003cbr\u003eThe console and seat cushion interfere with each other in the front position of the seat slide. SPORT and Orthopedo are about 5mm. SP- # and racer require SP-G offset adapter set (6600 yen \u003cproduct number\u003e). Adjust the RMS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold side adapter for RMS. Also, if there is interference with the interior, it can be alleviated by adjustment. Adjust the RCS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold RCS side adapter. Adjust the RMS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold side adapter for RMS. Also, if there is interference with the interior, it can be alleviated by adjustment. Adjust the RCS to the optimum position (front-back height, left-right offset 0\/5\/10 mm) with the separately sold RCS side adapter.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- CS \/ CR \/ CG \/ COMFOMED: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- CSE: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- CT: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- C-Classic: Remove the side cover (recliner cover), to avoid (alleviate) interference with the car.\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SR-2 late model \/ SR-3 \/ SR-4 \/ SR-5\u003cbr\u003e- Rally Special \/ First Generation SR \/ SR-2 early model\u003cbr\u003e- Late model A-8\u003cbr\u003e- Early model A-8\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- SP-GN \/ SP-AN: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Swift - ZC13S (2016-2021) K10C\u003cbr\u003eSuzuki - Swift - ZC53S (2016-2021) K12C\u003cbr\u003eSuzuki - Swift - ZC83S (2016-2021) K12C\u003c!--split--\u003e\u003c\/product\u003e"}

{"id":6267194081462,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Swift ZC72S\/ZD72S (2009-2021)","handle":"recaro-japan-base-frame-seat-rail-standard-right-suzuki-swift-zc72s-zd72s-2009-2021-2088-543-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position:5mm higher than lowest position of OEM seat.(Middle position of 3 position baseframe with ST-JJ)（(A case of Style-JJ,the spacer use 19mm.)5mm to door from OEM seat.The length of slider is 20mm shorter than OEM seat on front side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. Swift Sport Manual car（In the case of CVT, please refer to the page of the ZC \/ ZD72) For non-side airbag car only. 2WD only. . If your car has the Optional center console,RECARO Armrest cannot be installed Accessories and the navigation unit are unconfirmed.\u003cbr\u003e- Only manual shift car of SWIFT SPORT is confirmed. Other cars:there is interference betwenn shif lever and seat cushion. RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Swift - ZC72S (2013-2018) K12B\u003cbr\u003eSuzuki - Swift - ZC72S (2009-2013) K12B\u003cbr\u003eSuzuki - Swift - ZD72S (2014-2021) K12B\u003c!--split--\u003e","published_at":"2021-02-16T20:52:53+08:00","created_at":"2021-02-16T20:52:53+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","2019","2020","2021","recaro-japan","right","seat-rails","suzuki","swift-zc72s-2010-2018-na-k12b-i4","swift-zd72s-2014-2021-na-k12b-i4","ws10"],"price":24700,"price_min":24700,"price_max":24700,"available":true,"price_varies":false,"compare_at_price":23900,"compare_at_price_min":23900,"compare_at_price_max":23900,"compare_at_price_varies":false,"variants":[{"id":38045015736502,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2088.543.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Swift ZC72S\/ZD72S (2009-2021)","public_title":null,"options":["Default Title"],"price":24700,"weight":17000,"compare_at_price":23900,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-swift-zc72szd72s-2009-2021-rzcrew.jpg?v=1710326885"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-swift-zc72szd72s-2009-2021-rzcrew.jpg?v=1710326885","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Swift ZC72S\/ZD72S (2009-2021) - 2088.543.2 - Rzcrewgarage","id":22850260336822,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-swift-zc72szd72s-2009-2021-rzcrew.jpg?v=1710326885"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-swift-zc72szd72s-2009-2021-rzcrew.jpg?v=1710326885","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. One-position type.\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Seat position:5mm higher than lowest position of OEM seat.(Middle position of 3 position baseframe with ST-JJ)（(A case of Style-JJ,the spacer use 19mm.)5mm to door from OEM seat.The length of slider is 20mm shorter than OEM seat on front side.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. Swift Sport Manual car（In the case of CVT, please refer to the page of the ZC \/ ZD72) For non-side airbag car only. 2WD only. . If your car has the Optional center console,RECARO Armrest cannot be installed Accessories and the navigation unit are unconfirmed.\u003cbr\u003e- Only manual shift car of SWIFT SPORT is confirmed. Other cars:there is interference betwenn shif lever and seat cushion. RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Swift - ZC72S (2013-2018) K12B\u003cbr\u003eSuzuki - Swift - ZC72S (2009-2013) K12B\u003cbr\u003eSuzuki - Swift - ZD72S (2014-2021) K12B\u003c!--split--\u003e"}

{"id":6267192082614,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Wagon R MH35S\/MH55S (2017-2021)","handle":"recaro-japan-base-frame-seat-rail-standard-right-suzuki-wagon-r-mh35s-mh55s-2017-2021-2088-003-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator.Function of seat belt reminder loses on passenger seat. (Warning lights of the seat belt will not light.)Seating position: 9mm higher than the lowest height of OEM seat.(A case of New LX-F using middle position of 3 position baseframe. The height can be adjustable. 22mm higher than OEM seat or 4mm lower than OEM seat.) Seat offset is 0.(handle center). The length of slider is 20mm shorter than OEM slider.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. Attached a side airbag canceller. For 2WD \u0026amp; 4WD car. Optional equipment car is unconfirmed.\u003cbr\u003e- There is interference between seat backrest side and door trim..=\u0026gt;AM19 series TREND(a few mm). SP-#,Racer needs SP-G offset adapter (PN 1600094J).RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Wagon R - MH35S (2017-2021) R06A\u003cbr\u003eSuzuki - Wagon R - MH55S (2017-2021) R06A\u003c!--split--\u003e","published_at":"2021-02-16T20:52:06+08:00","created_at":"2021-02-16T20:52:07+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2017","2018","2019","2020","2021","recaro-japan","right","seat-rails","suzuki","wagon-r-mh35s-2017-2021-na-r06a-i3","wagon-r-mh55s-2017-2021-na-r06a-i3","ws10"],"price":24700,"price_min":24700,"price_max":24700,"available":true,"price_varies":false,"compare_at_price":23900,"compare_at_price_min":23900,"compare_at_price_max":23900,"compare_at_price_varies":false,"variants":[{"id":38045014229174,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2088.003.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Wagon R MH35S\/MH55S (2017-2021)","public_title":null,"options":["Default Title"],"price":24700,"weight":17000,"compare_at_price":23900,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-wagon-r-mh35smh55s-2017-2021-rzcrew.jpg?v=1710326902"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-wagon-r-mh35smh55s-2017-2021-rzcrew.jpg?v=1710326902","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki Wagon R MH35S\/MH55S (2017-2021) - 2088.003.2 - Rzcrewgarage","id":22850256273590,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-wagon-r-mh35smh55s-2017-2021-rzcrew.jpg?v=1710326902"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-wagon-r-mh35smh55s-2017-2021-rzcrew.jpg?v=1710326902","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator.Function of seat belt reminder loses on passenger seat. (Warning lights of the seat belt will not light.)Seating position: 9mm higher than the lowest height of OEM seat.(A case of New LX-F using middle position of 3 position baseframe. The height can be adjustable. 22mm higher than OEM seat or 4mm lower than OEM seat.) Seat offset is 0.(handle center). The length of slider is 20mm shorter than OEM slider.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. Attached a side airbag canceller. For 2WD \u0026amp; 4WD car. Optional equipment car is unconfirmed.\u003cbr\u003e- There is interference between seat backrest side and door trim..=\u0026gt;AM19 series TREND(a few mm). SP-#,Racer needs SP-G offset adapter (PN 1600094J).RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - Wagon R - MH35S (2017-2021) R06A\u003cbr\u003eSuzuki - Wagon R - MH55S (2017-2021) R06A\u003c!--split--\u003e"}

{"id":6267192148150,"title":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki XBee MN71S (2017-2021)","handle":"recaro-japan-base-frame-seat-rail-standard-right-suzuki-xbee-mn71s-2017-2021-2088-003-2","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator.Function of seat belt reminder loses on passenger seat. (Warning lights of the seat belt will not light.)Seating position: 9mm higher than the lowest height of OEM seat.(A case of New LX-F using middle position of 3 position baseframe. The height can be adjustable. 22mm higher than OEM seat or 4mm lower than OEM seat.) Seat offset is 0.(handle center). The length of slider is 20mm shorter than OEM slider.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. Attached a side airbag canceller. For 2WD \u0026amp; 4WD car. Optional equipment car is unconfirmed.\u003cbr\u003e- There is interference between seat backrest side and door trim..=\u0026gt;AM19 series TREND(a few mm). SP-#,Racer needs SP-G offset adapter (PN 1600094J).RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - XBee - MN71S (2017-2021) K10C\u003c!--split--\u003e","published_at":"2021-02-16T20:52:07+08:00","created_at":"2021-02-16T20:52:08+08:00","vendor":"Recaro Japan","type":"Seat Rails","tags":["2017","2018","2019","2020","2021","recaro-japan","right","seat-rails","suzuki","ws10","xbee-mn71s-2016-2021-tc-k10c-i4"],"price":24700,"price_min":24700,"price_max":24700,"available":true,"price_varies":false,"compare_at_price":23900,"compare_at_price_min":23900,"compare_at_price_max":23900,"compare_at_price_varies":false,"variants":[{"id":38045014294710,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2088.003.2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki XBee MN71S (2017-2021)","public_title":null,"options":["Default Title"],"price":24700,"weight":17000,"compare_at_price":23900,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-xbee-mn71s-2017-2021-rzcrew.jpg?v=1710326901"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-xbee-mn71s-2017-2021-rzcrew.jpg?v=1710326901","options":["Title"],"media":[{"alt":"Recaro Japan - Base Frame Seat Rail Standard Right - Suzuki XBee MN71S (2017-2021) - 2088.003.2 - Rzcrewgarage","id":22850256339126,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-xbee-mn71s-2017-2021-rzcrew.jpg?v=1710326901"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/recaro-japan-base-frame-seat-rail-standard-right-suzuki-xbee-mn71s-2017-2021-rzcrew.jpg?v=1710326901","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Recaro Japan\u003cbr\u003ePosition: Right\u003cbr\u003eType: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e- Function of side airbag loses. Need to cancel airbag warning indicator.Function of seat belt reminder loses on passenger seat. (Warning lights of the seat belt will not light.)Seating position: 9mm higher than the lowest height of OEM seat.(A case of New LX-F using middle position of 3 position baseframe. The height can be adjustable. 22mm higher than OEM seat or 4mm lower than OEM seat.) Seat offset is 0.(handle center). The length of slider is 20mm shorter than OEM slider.\u003cbr\u003e- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car. Attached a side airbag canceller. For 2WD \u0026amp; 4WD car. Optional equipment car is unconfirmed.\u003cbr\u003e- There is interference between seat backrest side and door trim..=\u0026gt;AM19 series TREND(a few mm). SP-#,Racer needs SP-G offset adapter (PN 1600094J).RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0\/5\/10mm). Interference can be reduced by adjustment.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003eFits the following seats:\u003cbr\u003e- LX \/ LX-# \/ LX-VS \/ LX-VF \/ ERGOMED \/ ERGOMED C\/ ERGOMED D\/ ERGOMED E \/ ERGOMED LD \/ ERGOMED MV (Based on IS-84 structure)\u003cbr\u003e- LX-F (Based on IS-05 structure)\u003cbr\u003e- LS \/ LS-# \/ LT-#\u003cbr\u003e- RMS2600A \/ 2700G: A separate side adapter must be provided.\u003cbr\u003e- New Orthopead (with RECARO Vent)\u003cbr\u003e- RCS: A separate side adapter must be provided.\u003cbr\u003e- SP-G \/ SP-A: A separate side adapter must be provided.\u003cbr\u003e- RACER SP-G\/A: A separate side adapter must be provided.\u003cbr\u003e- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC\u003cbr\u003e- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC\u003cbr\u003e- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC\u003cbr\u003e- AM19 TREND-JS\u003cbr\u003e- AM19 STYLE-JS\u003cbr\u003e- AM19 SPORT-JS\u003cbr\u003e- AM19 TREND-D AM19 TREND-DC\u003cbr\u003e- AM19 STYLE-D AM19 STYLE-DC\u003cbr\u003e- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV\u003cbr\u003e- TS-# \/ RS-#: A separate side adapter must be provided.\u003cbr\u003e- SP-X\u003cbr\u003e- SR-6 \/ SR-7 \/ SR-7F \/ SR-11\u003cbr\u003e- Sportster \/ Cross Sportster\u003cbr\u003e- Armrest: 2 or 3\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Seat rail shape may differ. Seat rails are sold per piece. Please ensure to choose the right position (Right\/Left). \u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSuzuki - XBee - MN71S (2017-2021) K10C\u003c!--split--\u003e"}

{"id":7646571528374,"title":"Rzcrew Racing - GoTrack \"GT\" Monotube Coilover Kit - Suzuki Jimny JB64W","handle":"rzcrew-racing-mt1gt-sz05-04-jb64w","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003ePart Number: MT1GT-SZ05-04\u003cbr\u003eFront Mounts: N\/A\u003cbr\u003eRear Mounts: N\/A\u003cbr\u003eSpring Rates:\u003cbr\u003eFront:3KG\u003cbr\u003eRear: 2.5KG\u003cbr\u003e\u003cbr\u003eRZCrew Racing GoTrack \"GT\" Series is a high-spec fast street\/race damper that focuses on performance and precise handling.\u003cbr\u003e\u003cbr\u003eUnlike traditional coilover kits that lower your car for general street driving, the GT kit provides a lowered ride and massively improved handling, thanks to higher spring rates and a redefined front \/ rear high speed balance.\u003cbr\u003eThe full body length adjustment and separate pre-load setting allow a lowered stance without sacrificing bump-stroke travel.\u003cbr\u003eIts inverted Monotube design allows for high precision driving and predictability.\u003cbr\u003e\nThe GoTrack Coilover kits feature 32-steps adjustable dampening for precise suspension tuning.\u003cbr\u003eThis suspension kit can be fully overhauled.\u003cbr\u003eWe learnt from other brands that downtime is never ideal for our customers, thus all our coilover kits carry a strict 1 year one-to-one strut replacement warranty in the case of any leak. Pillow ball are not included in the warranty yet replacement parts are avilable.\u003cbr\u003e\u003cbr\u003eOur GoTrack Coilover kits feature:\u003cbr\u003e\u003cbr\u003e- Inverted Monotube design for spirited driving and racing.\u003cbr\u003e- Full body length adjustment with separate spring pre-load to avoid bumpiness.\u003cbr\u003e- Fully treated aluminum body for strength and life span.\u003cbr\u003e- High quality Fush Silkolene oil for better damper temperature control and lower friction during hard cornering\u003cbr\u003e- Teflon springs seats to avoid squeaky noises.\u003cbr\u003e- 32 adjustement steps, for precise suspension tuning.\u003cbr\u003e- Free choice of spring rate depending on model.\u003cbr\u003e- 1 year one-to-one replacement strut on any leak.\u003cbr\u003e- The RZCrew Racing GT Monotube Coilovers are track-tested, and their reliability has been proven during the 2019 Sepang 1000km Race held in Malaysia. Our suspensions completed the race with no sign of leakage or registered fatigue during the after-race inspection.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eJimny | JB64W | 2018-2023 | TC | R06A | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2023-08-20T12:03:00+08:00","created_at":"2023-08-20T11:47:58+08:00","vendor":"Rzcrew Racing","type":"Coilovers and Springs","tags":["2018","2019","2020","2021","2022","2023","coilovers-and-springs","dampening-and-height-adjustable","jimny-jb64w-2018-2023-tc-r06a-i4","rzcrew-garage","rzcrew-racing","sg1","suzuki","Wei Chang","ws112"],"price":109000,"price_min":109000,"price_max":109000,"available":true,"price_varies":false,"compare_at_price":109000,"compare_at_price_min":109000,"compare_at_price_max":109000,"compare_at_price_varies":false,"variants":[{"id":42348602687670,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MT1GT-SZ05-04","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - GoTrack \"GT\" Monotube Coilover Kit - Suzuki Jimny JB64W","public_title":null,"options":["Default Title"],"price":109000,"weight":25000,"compare_at_price":109000,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-coilover-kit-suzuki-jimny-jb64w-rzcrew.jpg?v=1710316040"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-coilover-kit-suzuki-jimny-jb64w-rzcrew.jpg?v=1710316040","options":["Title"],"media":[{"alt":"Rzcrew Racing - GoTrack \"GT\" Monotube Coilover Kit - Suzuki Jimny JB64W - RZCrewGarage","id":26512095445174,"position":1,"preview_image":{"aspect_ratio":1.329,"height":1429,"width":1899,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-coilover-kit-suzuki-jimny-jb64w-rzcrew.jpg?v=1710316040"},"aspect_ratio":1.329,"height":1429,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-coilover-kit-suzuki-jimny-jb64w-rzcrew.jpg?v=1710316040","width":1899}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003ePart Number: MT1GT-SZ05-04\u003cbr\u003eFront Mounts: N\/A\u003cbr\u003eRear Mounts: N\/A\u003cbr\u003eSpring Rates:\u003cbr\u003eFront:3KG\u003cbr\u003eRear: 2.5KG\u003cbr\u003e\u003cbr\u003eRZCrew Racing GoTrack \"GT\" Series is a high-spec fast street\/race damper that focuses on performance and precise handling.\u003cbr\u003e\u003cbr\u003eUnlike traditional coilover kits that lower your car for general street driving, the GT kit provides a lowered ride and massively improved handling, thanks to higher spring rates and a redefined front \/ rear high speed balance.\u003cbr\u003eThe full body length adjustment and separate pre-load setting allow a lowered stance without sacrificing bump-stroke travel.\u003cbr\u003eIts inverted Monotube design allows for high precision driving and predictability.\u003cbr\u003e\nThe GoTrack Coilover kits feature 32-steps adjustable dampening for precise suspension tuning.\u003cbr\u003eThis suspension kit can be fully overhauled.\u003cbr\u003eWe learnt from other brands that downtime is never ideal for our customers, thus all our coilover kits carry a strict 1 year one-to-one strut replacement warranty in the case of any leak. Pillow ball are not included in the warranty yet replacement parts are avilable.\u003cbr\u003e\u003cbr\u003eOur GoTrack Coilover kits feature:\u003cbr\u003e\u003cbr\u003e- Inverted Monotube design for spirited driving and racing.\u003cbr\u003e- Full body length adjustment with separate spring pre-load to avoid bumpiness.\u003cbr\u003e- Fully treated aluminum body for strength and life span.\u003cbr\u003e- High quality Fush Silkolene oil for better damper temperature control and lower friction during hard cornering\u003cbr\u003e- Teflon springs seats to avoid squeaky noises.\u003cbr\u003e- 32 adjustement steps, for precise suspension tuning.\u003cbr\u003e- Free choice of spring rate depending on model.\u003cbr\u003e- 1 year one-to-one replacement strut on any leak.\u003cbr\u003e- The RZCrew Racing GT Monotube Coilovers are track-tested, and their reliability has been proven during the 2019 Sepang 1000km Race held in Malaysia. Our suspensions completed the race with no sign of leakage or registered fatigue during the after-race inspection.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eJimny | JB64W | 2018-2023 | TC | R06A | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":7646571495606,"title":"Rzcrew Racing - GoTrack \"GT\" Monotube Coilover Kit - Suzuki Jimny JB74W","handle":"rzcrew-racing-mt1gt-sz05-04-jb74w","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003ePart Number: MT1GT-SZ05-04\u003cbr\u003eFront Mounts: N\/A\u003cbr\u003eRear Mounts: N\/A\u003cbr\u003eSpring Rates:\u003cbr\u003eFront:3KG\u003cbr\u003eRear: 2.5KG\u003cbr\u003e\u003cbr\u003eRZCrew Racing GoTrack \"GT\" Series is a high-spec fast street\/race damper that focuses on performance and precise handling.\u003cbr\u003e\u003cbr\u003eUnlike traditional coilover kits that lower your car for general street driving, the GT kit provides a lowered ride and massively improved handling, thanks to higher spring rates and a redefined front \/ rear high speed balance.\u003cbr\u003eThe full body length adjustment and separate pre-load setting allow a lowered stance without sacrificing bump-stroke travel.\u003cbr\u003eIts inverted Monotube design allows for high precision driving and predictability.\u003cbr\u003e\nThe GoTrack Coilover kits feature 32-steps adjustable dampening for precise suspension tuning.\u003cbr\u003eThis suspension kit can be fully overhauled.\u003cbr\u003eWe learnt from other brands that downtime is never ideal for our customers, thus all our coilover kits carry a strict 1 year one-to-one strut replacement warranty in the case of any leak. Pillow ball are not included in the warranty yet replacement parts are avilable.\u003cbr\u003e\u003cbr\u003eOur GoTrack Coilover kits feature:\u003cbr\u003e\u003cbr\u003e- Inverted Monotube design for spirited driving and racing.\u003cbr\u003e- Full body length adjustment with separate spring pre-load to avoid bumpiness.\u003cbr\u003e- Fully treated aluminum body for strength and life span.\u003cbr\u003e- High quality Fush Silkolene oil for better damper temperature control and lower friction during hard cornering\u003cbr\u003e- Teflon springs seats to avoid squeaky noises.\u003cbr\u003e- 32 adjustement steps, for precise suspension tuning.\u003cbr\u003e- Free choice of spring rate depending on model.\u003cbr\u003e- 1 year one-to-one replacement strut on any leak.\u003cbr\u003e- The RZCrew Racing GT Monotube Coilovers are track-tested, and their reliability has been proven during the 2019 Sepang 1000km Race held in Malaysia. Our suspensions completed the race with no sign of leakage or registered fatigue during the after-race inspection.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eJimny | JB74W | 2018-2023 | NA | K15B | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2023-08-20T12:03:00+08:00","created_at":"2023-08-20T11:47:56+08:00","vendor":"Rzcrew Racing","type":"Coilovers and Springs","tags":["2018","2019","2020","2021","2022","2023","coilovers-and-springs","dampening-and-height-adjustable","jimny-jb74w-2018-2023-na-k15b-i4","rzcrew-garage","rzcrew-racing","sg1","suzuki","Wei Chang","ws112"],"price":109000,"price_min":109000,"price_max":109000,"available":true,"price_varies":false,"compare_at_price":109000,"compare_at_price_min":109000,"compare_at_price_max":109000,"compare_at_price_varies":false,"variants":[{"id":42348602654902,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MT1GT-SZ05-04","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - GoTrack \"GT\" Monotube Coilover Kit - Suzuki Jimny JB74W","public_title":null,"options":["Default Title"],"price":109000,"weight":25000,"compare_at_price":109000,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-coilover-kit-suzuki-jimny-jb74w-rzcrew.jpg?v=1710316040"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-coilover-kit-suzuki-jimny-jb74w-rzcrew.jpg?v=1710316040","options":["Title"],"media":[{"alt":"Rzcrew Racing - GoTrack \"GT\" Monotube Coilover Kit - Suzuki Jimny JB74W - RZCrewGarage","id":26512095412406,"position":1,"preview_image":{"aspect_ratio":1.329,"height":1429,"width":1899,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-coilover-kit-suzuki-jimny-jb74w-rzcrew.jpg?v=1710316040"},"aspect_ratio":1.329,"height":1429,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/rzcrew-racing-gotrack-gt-monotube-coilover-kit-suzuki-jimny-jb74w-rzcrew.jpg?v=1710316040","width":1899}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003ePart Number: MT1GT-SZ05-04\u003cbr\u003eFront Mounts: N\/A\u003cbr\u003eRear Mounts: N\/A\u003cbr\u003eSpring Rates:\u003cbr\u003eFront:3KG\u003cbr\u003eRear: 2.5KG\u003cbr\u003e\u003cbr\u003eRZCrew Racing GoTrack \"GT\" Series is a high-spec fast street\/race damper that focuses on performance and precise handling.\u003cbr\u003e\u003cbr\u003eUnlike traditional coilover kits that lower your car for general street driving, the GT kit provides a lowered ride and massively improved handling, thanks to higher spring rates and a redefined front \/ rear high speed balance.\u003cbr\u003eThe full body length adjustment and separate pre-load setting allow a lowered stance without sacrificing bump-stroke travel.\u003cbr\u003eIts inverted Monotube design allows for high precision driving and predictability.\u003cbr\u003e\nThe GoTrack Coilover kits feature 32-steps adjustable dampening for precise suspension tuning.\u003cbr\u003eThis suspension kit can be fully overhauled.\u003cbr\u003eWe learnt from other brands that downtime is never ideal for our customers, thus all our coilover kits carry a strict 1 year one-to-one strut replacement warranty in the case of any leak. Pillow ball are not included in the warranty yet replacement parts are avilable.\u003cbr\u003e\u003cbr\u003eOur GoTrack Coilover kits feature:\u003cbr\u003e\u003cbr\u003e- Inverted Monotube design for spirited driving and racing.\u003cbr\u003e- Full body length adjustment with separate spring pre-load to avoid bumpiness.\u003cbr\u003e- Fully treated aluminum body for strength and life span.\u003cbr\u003e- High quality Fush Silkolene oil for better damper temperature control and lower friction during hard cornering\u003cbr\u003e- Teflon springs seats to avoid squeaky noises.\u003cbr\u003e- 32 adjustement steps, for precise suspension tuning.\u003cbr\u003e- Free choice of spring rate depending on model.\u003cbr\u003e- 1 year one-to-one replacement strut on any leak.\u003cbr\u003e- The RZCrew Racing GT Monotube Coilovers are track-tested, and their reliability has been proven during the 2019 Sepang 1000km Race held in Malaysia. Our suspensions completed the race with no sign of leakage or registered fatigue during the after-race inspection.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eJimny | JB74W | 2018-2023 | NA | K15B | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":8047479718070,"title":"Rzcrew Racing - High-power ignition coils - Suzuki Ignis Hybrid FF21S","handle":"rzcrew-racing-high-power-ignition-coils-suzuki-ignis-hybrid-ff21s-rz-ic-k12c","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003ePart Number: RZ-IC-K12C\u003cbr\u003eIgnition Type: Direct Ignition Coil (OEM Ref number 33400-81P00, 33400-63R00)\u003cbr\u003eEngine Type: K12C\u003cbr\u003e\u003cbr\u003eIgnition coils supply the spark plugs with the power to create a spark, causing your engine to combust the air and fuel in the combustion chamber. A quality set of ignition coils will supply your engine with a good spark, reducing the chance of a misfire. \u003cbr\u003e\u003cbr\u003eThe Rzcrew Racing High Ignition Coil Blaster is a direct replacement for the stock units. It produces 2 times more spark energy than stock coils and also generates an ultra fast multi-spark discharge of 5 sparks up to the highest RPM. The spark amperage is increased by 30%, allowing the spark to reach many more molecules and therefore accelerate the ignition and combustion process. This is extremely important in forced induction applications but also improves the performance of normally aspirated engines. Rzcrew Racing High Ignition Coil Blaster will increase horsepower and torque throughout the entire rpm range. This upgrade will also reduce fuel consumption. Even the engines with legendary smoothness will be further refined with the Rzcrew Racing High Ignition Coil Blaster upgrade. Installation is easy. Direct bolt-in to the engine, no splicing or cutting into stock wiring, simply replace the stock coils with our Plasma Direct Coils, and ready to go!\u003cbr\u003eProduct Picture may differ.\u003cbr\u003eOur product Features:\u003cbr\u003e- Improved Combustion\u003cbr\u003e\n- 30% Higher Amperage for the Initial Spark Discharge Increasing Ignition Performance. Increased BHP and Fuel economy\u003cbr\u003e\n- Constantly stabilize provision of the sparks and prevent malfunction, abnormal noises are eliminatedresulting in Improved throttle response and smoothness\u003cbr\u003e\n- High efficiency combustion can be created without missfire at higher boost or in High RPM ranges\u003cbr\u003e\n- Direct Bolt in part \/ No modifications required\u003cbr\u003e\n- 1 Year Warranty\u003cbr\u003e-Compatible with all Rzcrew Racing Coil on plug Kit\u003cbr\u003eDyno tested on our Rzcrew Racing K20 making +5.5WHP and +1.7NM over the stock Genuine Honda Coils\u003cbr\u003e\n- EXCEED OEM PERFORMANCE COILS\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eIgnis Hybrid | FF21S | 2017-2020 | H | K12C | I4\u003c!--split--\u003e","published_at":"2024-08-15T17:02:58+08:00","created_at":"2024-08-15T16:58:11+08:00","vendor":"Rzcrew Racing","type":"Ignition Coils Booster and Cables","tags":["'-33400-63r00)","2017","2018","2019","4","direct-ignition-coil-(oem-ref-number-33400-81p00","FF21S","ignis-hybrid-ff21s-2017-2020-h-k12c-i4","ignition-coils-booster-and-cables","rzcrew-garage","rzcrew-racing","sg1","suzuki","Tianjin","ws130"],"price":29300,"price_min":29300,"price_max":29300,"available":true,"price_varies":false,"compare_at_price":29300,"compare_at_price_min":29300,"compare_at_price_max":29300,"compare_at_price_varies":false,"variants":[{"id":43400259305654,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RZ-IC-K12C","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - High-power ignition coils - Suzuki Ignis Hybrid FF21S","public_title":null,"options":["Default Title"],"price":29300,"weight":2000,"compare_at_price":29300,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_Suzuki_K14C_K12_K10_High_output_Coil_pack_2ba7717a-3e8a-4b8e-af3c-cadabe237851.jpg?v=1723805481","\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_High-power_ignition_coil_Dyno_test_on_Honda_K20_6973aa64-5aea-4979-8996-9682de26596f.jpg?v=1723805481","\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_High-power_ignition_coil_Dyno_test_installation_on_K_series_engine_a4fb2080-d654-4215-b3fc-e10c134657ad.jpg?v=1723805481"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_Suzuki_K14C_K12_K10_High_output_Coil_pack_2ba7717a-3e8a-4b8e-af3c-cadabe237851.jpg?v=1723805481","options":["Title"],"media":[{"alt":"Rzcrew Racing - High-power ignition coils - Suzuki Ignis Hybrid FF21S - RZ-IC-K12C","id":28346297811126,"position":1,"preview_image":{"aspect_ratio":1.333,"height":3072,"width":4096,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_Suzuki_K14C_K12_K10_High_output_Coil_pack_2ba7717a-3e8a-4b8e-af3c-cadabe237851.jpg?v=1723805481"},"aspect_ratio":1.333,"height":3072,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_Suzuki_K14C_K12_K10_High_output_Coil_pack_2ba7717a-3e8a-4b8e-af3c-cadabe237851.jpg?v=1723805481","width":4096},{"alt":"Rzcrew Racing - High-power ignition coils - Suzuki Ignis Hybrid FF21S - RZ-IC-K12C","id":28346297843894,"position":2,"preview_image":{"aspect_ratio":1.388,"height":1153,"width":1600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_High-power_ignition_coil_Dyno_test_on_Honda_K20_6973aa64-5aea-4979-8996-9682de26596f.jpg?v=1723805481"},"aspect_ratio":1.388,"height":1153,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_High-power_ignition_coil_Dyno_test_on_Honda_K20_6973aa64-5aea-4979-8996-9682de26596f.jpg?v=1723805481","width":1600},{"alt":"Rzcrew Racing - High-power ignition coils - Suzuki Ignis Hybrid FF21S - RZ-IC-K12C","id":28346297876662,"position":3,"preview_image":{"aspect_ratio":0.75,"height":1600,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_High-power_ignition_coil_Dyno_test_installation_on_K_series_engine_a4fb2080-d654-4215-b3fc-e10c134657ad.jpg?v=1723805481"},"aspect_ratio":0.75,"height":1600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_High-power_ignition_coil_Dyno_test_installation_on_K_series_engine_a4fb2080-d654-4215-b3fc-e10c134657ad.jpg?v=1723805481","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003ePart Number: RZ-IC-K12C\u003cbr\u003eIgnition Type: Direct Ignition Coil (OEM Ref number 33400-81P00, 33400-63R00)\u003cbr\u003eEngine Type: K12C\u003cbr\u003e\u003cbr\u003eIgnition coils supply the spark plugs with the power to create a spark, causing your engine to combust the air and fuel in the combustion chamber. A quality set of ignition coils will supply your engine with a good spark, reducing the chance of a misfire. \u003cbr\u003e\u003cbr\u003eThe Rzcrew Racing High Ignition Coil Blaster is a direct replacement for the stock units. It produces 2 times more spark energy than stock coils and also generates an ultra fast multi-spark discharge of 5 sparks up to the highest RPM. The spark amperage is increased by 30%, allowing the spark to reach many more molecules and therefore accelerate the ignition and combustion process. This is extremely important in forced induction applications but also improves the performance of normally aspirated engines. Rzcrew Racing High Ignition Coil Blaster will increase horsepower and torque throughout the entire rpm range. This upgrade will also reduce fuel consumption. Even the engines with legendary smoothness will be further refined with the Rzcrew Racing High Ignition Coil Blaster upgrade. Installation is easy. Direct bolt-in to the engine, no splicing or cutting into stock wiring, simply replace the stock coils with our Plasma Direct Coils, and ready to go!\u003cbr\u003eProduct Picture may differ.\u003cbr\u003eOur product Features:\u003cbr\u003e- Improved Combustion\u003cbr\u003e\n- 30% Higher Amperage for the Initial Spark Discharge Increasing Ignition Performance. Increased BHP and Fuel economy\u003cbr\u003e\n- Constantly stabilize provision of the sparks and prevent malfunction, abnormal noises are eliminatedresulting in Improved throttle response and smoothness\u003cbr\u003e\n- High efficiency combustion can be created without missfire at higher boost or in High RPM ranges\u003cbr\u003e\n- Direct Bolt in part \/ No modifications required\u003cbr\u003e\n- 1 Year Warranty\u003cbr\u003e-Compatible with all Rzcrew Racing Coil on plug Kit\u003cbr\u003eDyno tested on our Rzcrew Racing K20 making +5.5WHP and +1.7NM over the stock Genuine Honda Coils\u003cbr\u003e\n- EXCEED OEM PERFORMANCE COILS\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eIgnis Hybrid | FF21S | 2017-2020 | H | K12C | I4\u003c!--split--\u003e"}

{"id":8047479292086,"title":"Rzcrew Racing - High-power ignition coils - Suzuki Spacia MK53S","handle":"rzcrew-racing-high-power-ignition-coils-suzuki-spacia-mk53s-rz-ic-r06a","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003ePart Number: RZ-IC-R06A\u003cbr\u003eIgnition Type: Direct Ignition Coil (OEM Ref number 33400-81P00, 33400-63R00)\u003cbr\u003eEngine Type: R06A\u003cbr\u003e\u003cbr\u003eIgnition coils supply the spark plugs with the power to create a spark, causing your engine to combust the air and fuel in the combustion chamber. A quality set of ignition coils will supply your engine with a good spark, reducing the chance of a misfire. \u003cbr\u003e\u003cbr\u003eThe Rzcrew Racing High Ignition Coil Blaster is a direct replacement for the stock units. It produces 2 times more spark energy than stock coils and also generates an ultra fast multi-spark discharge of 5 sparks up to the highest RPM. The spark amperage is increased by 30%, allowing the spark to reach many more molecules and therefore accelerate the ignition and combustion process. This is extremely important in forced induction applications but also improves the performance of normally aspirated engines. Rzcrew Racing High Ignition Coil Blaster will increase horsepower and torque throughout the entire rpm range. This upgrade will also reduce fuel consumption. Even the engines with legendary smoothness will be further refined with the Rzcrew Racing High Ignition Coil Blaster upgrade. Installation is easy. Direct bolt-in to the engine, no splicing or cutting into stock wiring, simply replace the stock coils with our Plasma Direct Coils, and ready to go!\u003cbr\u003eProduct Picture may differ.\u003cbr\u003eOur product Features:\u003cbr\u003e- Improved Combustion\u003cbr\u003e\n- 30% Higher Amperage for the Initial Spark Discharge Increasing Ignition Performance. Increased BHP and Fuel economy\u003cbr\u003e\n- Constantly stabilize provision of the sparks and prevent malfunction, abnormal noises are eliminatedresulting in Improved throttle response and smoothness\u003cbr\u003e\n- High efficiency combustion can be created without missfire at higher boost or in High RPM ranges\u003cbr\u003e\n- Direct Bolt in part \/ No modifications required\u003cbr\u003e\n- 1 Year Warranty\u003cbr\u003e-Compatible with all Rzcrew Racing Coil on plug Kit\u003cbr\u003eDyno tested on our Rzcrew Racing K20 making +5.5WHP and +1.7NM over the stock Genuine Honda Coils\u003cbr\u003e\n- EXCEED OEM PERFORMANCE COILS\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSpacia | MK53S | 2017-2020 | NA | R06A | I3\u003c!--split--\u003e","published_at":"2024-08-15T17:02:41+08:00","created_at":"2024-08-15T16:57:53+08:00","vendor":"Rzcrew Racing","type":"Ignition Coils Booster and Cables","tags":["'-33400-63r00)","2017","2018","2019","4","direct-ignition-coil-(oem-ref-number-33400-81p00","ignition-coils-booster-and-cables","MK53S","rzcrew-garage","rzcrew-racing","sg1","spacia-mk53s-2017-2020-na-r06a-i3","suzuki","Tianjin","ws130"],"price":29300,"price_min":29300,"price_max":29300,"available":true,"price_varies":false,"compare_at_price":29300,"compare_at_price_min":29300,"compare_at_price_max":29300,"compare_at_price_varies":false,"variants":[{"id":43400258748598,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RZ-IC-R06A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - High-power ignition coils - Suzuki Spacia MK53S","public_title":null,"options":["Default Title"],"price":29300,"weight":2000,"compare_at_price":29300,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_Suzuki_K14C_K12_K10_High_output_Coil_pack_5eac0f78-e6bb-4c6c-9af7-54a800b83945.jpg?v=1723805465","\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_High-power_ignition_coil_Dyno_test_on_Honda_K20_75d3b71a-2b60-462c-8778-63fd6268a2b5.jpg?v=1723805465","\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_High-power_ignition_coil_Dyno_test_installation_on_K_series_engine_44f76de4-c192-463e-8af5-b2ebadaed245.jpg?v=1723805465"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_Suzuki_K14C_K12_K10_High_output_Coil_pack_5eac0f78-e6bb-4c6c-9af7-54a800b83945.jpg?v=1723805465","options":["Title"],"media":[{"alt":"Rzcrew Racing - High-power ignition coils - Suzuki Spacia MK53S - RZ-IC-R06A","id":28346296828086,"position":1,"preview_image":{"aspect_ratio":1.333,"height":3072,"width":4096,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_Suzuki_K14C_K12_K10_High_output_Coil_pack_5eac0f78-e6bb-4c6c-9af7-54a800b83945.jpg?v=1723805465"},"aspect_ratio":1.333,"height":3072,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_Suzuki_K14C_K12_K10_High_output_Coil_pack_5eac0f78-e6bb-4c6c-9af7-54a800b83945.jpg?v=1723805465","width":4096},{"alt":"Rzcrew Racing - High-power ignition coils - Suzuki Spacia MK53S - RZ-IC-R06A","id":28346296860854,"position":2,"preview_image":{"aspect_ratio":1.388,"height":1153,"width":1600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_High-power_ignition_coil_Dyno_test_on_Honda_K20_75d3b71a-2b60-462c-8778-63fd6268a2b5.jpg?v=1723805465"},"aspect_ratio":1.388,"height":1153,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_High-power_ignition_coil_Dyno_test_on_Honda_K20_75d3b71a-2b60-462c-8778-63fd6268a2b5.jpg?v=1723805465","width":1600},{"alt":"Rzcrew Racing - High-power ignition coils - Suzuki Spacia MK53S - RZ-IC-R06A","id":28346296893622,"position":3,"preview_image":{"aspect_ratio":0.75,"height":1600,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_High-power_ignition_coil_Dyno_test_installation_on_K_series_engine_44f76de4-c192-463e-8af5-b2ebadaed245.jpg?v=1723805465"},"aspect_ratio":0.75,"height":1600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_High-power_ignition_coil_Dyno_test_installation_on_K_series_engine_44f76de4-c192-463e-8af5-b2ebadaed245.jpg?v=1723805465","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003ePart Number: RZ-IC-R06A\u003cbr\u003eIgnition Type: Direct Ignition Coil (OEM Ref number 33400-81P00, 33400-63R00)\u003cbr\u003eEngine Type: R06A\u003cbr\u003e\u003cbr\u003eIgnition coils supply the spark plugs with the power to create a spark, causing your engine to combust the air and fuel in the combustion chamber. A quality set of ignition coils will supply your engine with a good spark, reducing the chance of a misfire. \u003cbr\u003e\u003cbr\u003eThe Rzcrew Racing High Ignition Coil Blaster is a direct replacement for the stock units. It produces 2 times more spark energy than stock coils and also generates an ultra fast multi-spark discharge of 5 sparks up to the highest RPM. The spark amperage is increased by 30%, allowing the spark to reach many more molecules and therefore accelerate the ignition and combustion process. This is extremely important in forced induction applications but also improves the performance of normally aspirated engines. Rzcrew Racing High Ignition Coil Blaster will increase horsepower and torque throughout the entire rpm range. This upgrade will also reduce fuel consumption. Even the engines with legendary smoothness will be further refined with the Rzcrew Racing High Ignition Coil Blaster upgrade. Installation is easy. Direct bolt-in to the engine, no splicing or cutting into stock wiring, simply replace the stock coils with our Plasma Direct Coils, and ready to go!\u003cbr\u003eProduct Picture may differ.\u003cbr\u003eOur product Features:\u003cbr\u003e- Improved Combustion\u003cbr\u003e\n- 30% Higher Amperage for the Initial Spark Discharge Increasing Ignition Performance. Increased BHP and Fuel economy\u003cbr\u003e\n- Constantly stabilize provision of the sparks and prevent malfunction, abnormal noises are eliminatedresulting in Improved throttle response and smoothness\u003cbr\u003e\n- High efficiency combustion can be created without missfire at higher boost or in High RPM ranges\u003cbr\u003e\n- Direct Bolt in part \/ No modifications required\u003cbr\u003e\n- 1 Year Warranty\u003cbr\u003e-Compatible with all Rzcrew Racing Coil on plug Kit\u003cbr\u003eDyno tested on our Rzcrew Racing K20 making +5.5WHP and +1.7NM over the stock Genuine Honda Coils\u003cbr\u003e\n- EXCEED OEM PERFORMANCE COILS\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSpacia | MK53S | 2017-2020 | NA | R06A | I3\u003c!--split--\u003e"}

{"id":8047479455926,"title":"Rzcrew Racing - High-power ignition coils - Suzuki Wagon R MH35S","handle":"rzcrew-racing-high-power-ignition-coils-suzuki-wagon-r-mh35s-rz-ic-r06a","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003ePart Number: RZ-IC-R06A\u003cbr\u003eIgnition Type: Direct Ignition Coil (OEM Ref number 33400-81P00, 33400-63R00)\u003cbr\u003eEngine Type: R06A\u003cbr\u003e\u003cbr\u003eIgnition coils supply the spark plugs with the power to create a spark, causing your engine to combust the air and fuel in the combustion chamber. A quality set of ignition coils will supply your engine with a good spark, reducing the chance of a misfire. \u003cbr\u003e\u003cbr\u003eThe Rzcrew Racing High Ignition Coil Blaster is a direct replacement for the stock units. It produces 2 times more spark energy than stock coils and also generates an ultra fast multi-spark discharge of 5 sparks up to the highest RPM. The spark amperage is increased by 30%, allowing the spark to reach many more molecules and therefore accelerate the ignition and combustion process. This is extremely important in forced induction applications but also improves the performance of normally aspirated engines. Rzcrew Racing High Ignition Coil Blaster will increase horsepower and torque throughout the entire rpm range. This upgrade will also reduce fuel consumption. Even the engines with legendary smoothness will be further refined with the Rzcrew Racing High Ignition Coil Blaster upgrade. Installation is easy. Direct bolt-in to the engine, no splicing or cutting into stock wiring, simply replace the stock coils with our Plasma Direct Coils, and ready to go!\u003cbr\u003eProduct Picture may differ.\u003cbr\u003eOur product Features:\u003cbr\u003e- Improved Combustion\u003cbr\u003e\n- 30% Higher Amperage for the Initial Spark Discharge Increasing Ignition Performance. Increased BHP and Fuel economy\u003cbr\u003e\n- Constantly stabilize provision of the sparks and prevent malfunction, abnormal noises are eliminatedresulting in Improved throttle response and smoothness\u003cbr\u003e\n- High efficiency combustion can be created without missfire at higher boost or in High RPM ranges\u003cbr\u003e\n- Direct Bolt in part \/ No modifications required\u003cbr\u003e\n- 1 Year Warranty\u003cbr\u003e-Compatible with all Rzcrew Racing Coil on plug Kit\u003cbr\u003eDyno tested on our Rzcrew Racing K20 making +5.5WHP and +1.7NM over the stock Genuine Honda Coils\u003cbr\u003e\n- EXCEED OEM PERFORMANCE COILS\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eWagon R | MH35S | 2017-2020 | TC | R06A | I3\u003c!--split--\u003e","published_at":"2024-08-15T17:02:41+08:00","created_at":"2024-08-15T16:57:59+08:00","vendor":"Rzcrew Racing","type":"Ignition Coils Booster and Cables","tags":["'-33400-63r00)","2017","2018","2019","4","direct-ignition-coil-(oem-ref-number-33400-81p00","ignition-coils-booster-and-cables","MH35S","rzcrew-garage","rzcrew-racing","sg1","suzuki","Tianjin","wagon-r-mh35s-2017-2020-tc-r06a-i3","ws130"],"price":29300,"price_min":29300,"price_max":29300,"available":true,"price_varies":false,"compare_at_price":29300,"compare_at_price_min":29300,"compare_at_price_max":29300,"compare_at_price_varies":false,"variants":[{"id":43400259010742,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RZ-IC-R06A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - High-power ignition coils - Suzuki Wagon R MH35S","public_title":null,"options":["Default Title"],"price":29300,"weight":2000,"compare_at_price":29300,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_Suzuki_K14C_K12_K10_High_output_Coil_pack_7958f0a7-c7e5-44b7-ae47-ac83a3282913.jpg?v=1723805470","\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_High-power_ignition_coil_Dyno_test_on_Honda_K20_4f2a8875-6d2c-4e18-bb29-a1ec6f72a832.jpg?v=1723805470","\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_High-power_ignition_coil_Dyno_test_installation_on_K_series_engine_3a04b800-0b77-456f-98e5-90bcdcd9ecee.jpg?v=1723805470"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_Suzuki_K14C_K12_K10_High_output_Coil_pack_7958f0a7-c7e5-44b7-ae47-ac83a3282913.jpg?v=1723805470","options":["Title"],"media":[{"alt":"Rzcrew Racing - High-power ignition coils - Suzuki Wagon R MH35S - RZ-IC-R06A","id":28346297090230,"position":1,"preview_image":{"aspect_ratio":1.333,"height":3072,"width":4096,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_Suzuki_K14C_K12_K10_High_output_Coil_pack_7958f0a7-c7e5-44b7-ae47-ac83a3282913.jpg?v=1723805470"},"aspect_ratio":1.333,"height":3072,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_Suzuki_K14C_K12_K10_High_output_Coil_pack_7958f0a7-c7e5-44b7-ae47-ac83a3282913.jpg?v=1723805470","width":4096},{"alt":"Rzcrew Racing - High-power ignition coils - Suzuki Wagon R MH35S - RZ-IC-R06A","id":28346297122998,"position":2,"preview_image":{"aspect_ratio":1.388,"height":1153,"width":1600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_High-power_ignition_coil_Dyno_test_on_Honda_K20_4f2a8875-6d2c-4e18-bb29-a1ec6f72a832.jpg?v=1723805470"},"aspect_ratio":1.388,"height":1153,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_High-power_ignition_coil_Dyno_test_on_Honda_K20_4f2a8875-6d2c-4e18-bb29-a1ec6f72a832.jpg?v=1723805470","width":1600},{"alt":"Rzcrew Racing - High-power ignition coils - Suzuki Wagon R MH35S - RZ-IC-R06A","id":28346297155766,"position":3,"preview_image":{"aspect_ratio":0.75,"height":1600,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_High-power_ignition_coil_Dyno_test_installation_on_K_series_engine_3a04b800-0b77-456f-98e5-90bcdcd9ecee.jpg?v=1723805470"},"aspect_ratio":0.75,"height":1600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_High-power_ignition_coil_Dyno_test_installation_on_K_series_engine_3a04b800-0b77-456f-98e5-90bcdcd9ecee.jpg?v=1723805470","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003ePart Number: RZ-IC-R06A\u003cbr\u003eIgnition Type: Direct Ignition Coil (OEM Ref number 33400-81P00, 33400-63R00)\u003cbr\u003eEngine Type: R06A\u003cbr\u003e\u003cbr\u003eIgnition coils supply the spark plugs with the power to create a spark, causing your engine to combust the air and fuel in the combustion chamber. A quality set of ignition coils will supply your engine with a good spark, reducing the chance of a misfire. \u003cbr\u003e\u003cbr\u003eThe Rzcrew Racing High Ignition Coil Blaster is a direct replacement for the stock units. It produces 2 times more spark energy than stock coils and also generates an ultra fast multi-spark discharge of 5 sparks up to the highest RPM. The spark amperage is increased by 30%, allowing the spark to reach many more molecules and therefore accelerate the ignition and combustion process. This is extremely important in forced induction applications but also improves the performance of normally aspirated engines. Rzcrew Racing High Ignition Coil Blaster will increase horsepower and torque throughout the entire rpm range. This upgrade will also reduce fuel consumption. Even the engines with legendary smoothness will be further refined with the Rzcrew Racing High Ignition Coil Blaster upgrade. Installation is easy. Direct bolt-in to the engine, no splicing or cutting into stock wiring, simply replace the stock coils with our Plasma Direct Coils, and ready to go!\u003cbr\u003eProduct Picture may differ.\u003cbr\u003eOur product Features:\u003cbr\u003e- Improved Combustion\u003cbr\u003e\n- 30% Higher Amperage for the Initial Spark Discharge Increasing Ignition Performance. Increased BHP and Fuel economy\u003cbr\u003e\n- Constantly stabilize provision of the sparks and prevent malfunction, abnormal noises are eliminatedresulting in Improved throttle response and smoothness\u003cbr\u003e\n- High efficiency combustion can be created without missfire at higher boost or in High RPM ranges\u003cbr\u003e\n- Direct Bolt in part \/ No modifications required\u003cbr\u003e\n- 1 Year Warranty\u003cbr\u003e-Compatible with all Rzcrew Racing Coil on plug Kit\u003cbr\u003eDyno tested on our Rzcrew Racing K20 making +5.5WHP and +1.7NM over the stock Genuine Honda Coils\u003cbr\u003e\n- EXCEED OEM PERFORMANCE COILS\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eWagon R | MH35S | 2017-2020 | TC | R06A | I3\u003c!--split--\u003e"}

{"id":8047479586998,"title":"Rzcrew Racing - High-power ignition coils - Suzuki Wagon R Stingray MH55S","handle":"rzcrew-racing-high-power-ignition-coils-suzuki-wagon-r-stingray-mh55s-rz-ic-r06a","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003ePart Number: RZ-IC-R06A\u003cbr\u003eIgnition Type: Direct Ignition Coil (OEM Ref number 33400-81P00, 33400-63R00)\u003cbr\u003eEngine Type: R06A\u003cbr\u003e\u003cbr\u003eIgnition coils supply the spark plugs with the power to create a spark, causing your engine to combust the air and fuel in the combustion chamber. A quality set of ignition coils will supply your engine with a good spark, reducing the chance of a misfire. \u003cbr\u003e\u003cbr\u003eThe Rzcrew Racing High Ignition Coil Blaster is a direct replacement for the stock units. It produces 2 times more spark energy than stock coils and also generates an ultra fast multi-spark discharge of 5 sparks up to the highest RPM. The spark amperage is increased by 30%, allowing the spark to reach many more molecules and therefore accelerate the ignition and combustion process. This is extremely important in forced induction applications but also improves the performance of normally aspirated engines. Rzcrew Racing High Ignition Coil Blaster will increase horsepower and torque throughout the entire rpm range. This upgrade will also reduce fuel consumption. Even the engines with legendary smoothness will be further refined with the Rzcrew Racing High Ignition Coil Blaster upgrade. Installation is easy. Direct bolt-in to the engine, no splicing or cutting into stock wiring, simply replace the stock coils with our Plasma Direct Coils, and ready to go!\u003cbr\u003eProduct Picture may differ.\u003cbr\u003eOur product Features:\u003cbr\u003e- Improved Combustion\u003cbr\u003e\n- 30% Higher Amperage for the Initial Spark Discharge Increasing Ignition Performance. Increased BHP and Fuel economy\u003cbr\u003e\n- Constantly stabilize provision of the sparks and prevent malfunction, abnormal noises are eliminatedresulting in Improved throttle response and smoothness\u003cbr\u003e\n- High efficiency combustion can be created without missfire at higher boost or in High RPM ranges\u003cbr\u003e\n- Direct Bolt in part \/ No modifications required\u003cbr\u003e\n- 1 Year Warranty\u003cbr\u003e-Compatible with all Rzcrew Racing Coil on plug Kit\u003cbr\u003eDyno tested on our Rzcrew Racing K20 making +5.5WHP and +1.7NM over the stock Genuine Honda Coils\u003cbr\u003e\n- EXCEED OEM PERFORMANCE COILS\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eWagon R Stingray | MK55S | 2017-2020 | TC | R06A | I3\u003c!--split--\u003e","published_at":"2024-08-15T17:02:41+08:00","created_at":"2024-08-15T16:58:04+08:00","vendor":"Rzcrew Racing","type":"Ignition Coils Booster and Cables","tags":["'-33400-63r00)","2017","2018","2019","4","direct-ignition-coil-(oem-ref-number-33400-81p00","ignition-coils-booster-and-cables","MH55S","rzcrew-garage","rzcrew-racing","sg1","suzuki","Tianjin","wagon-r-stingray-mk55s-2017-2020-tc-r06a-i3","ws130"],"price":29300,"price_min":29300,"price_max":29300,"available":true,"price_varies":false,"compare_at_price":29300,"compare_at_price_min":29300,"compare_at_price_max":29300,"compare_at_price_varies":false,"variants":[{"id":43400259141814,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RZ-IC-R06A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rzcrew Racing - High-power ignition coils - Suzuki Wagon R Stingray MH55S","public_title":null,"options":["Default Title"],"price":29300,"weight":2000,"compare_at_price":29300,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_Suzuki_K14C_K12_K10_High_output_Coil_pack_ca548d44-0039-489d-a43b-71964ab9de50.jpg?v=1723805476","\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_High-power_ignition_coil_Dyno_test_on_Honda_K20_696b0d25-a90d-4968-9444-88359dc1fcea.jpg?v=1723805476","\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_High-power_ignition_coil_Dyno_test_installation_on_K_series_engine_82ecefe0-834d-40eb-bcf3-3c6b0cca20fb.jpg?v=1723805476"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_Suzuki_K14C_K12_K10_High_output_Coil_pack_ca548d44-0039-489d-a43b-71964ab9de50.jpg?v=1723805476","options":["Title"],"media":[{"alt":"Rzcrew Racing - High-power ignition coils - Suzuki Wagon R Stingray MH55S - RZ-IC-R06A","id":28346297417910,"position":1,"preview_image":{"aspect_ratio":1.333,"height":3072,"width":4096,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_Suzuki_K14C_K12_K10_High_output_Coil_pack_ca548d44-0039-489d-a43b-71964ab9de50.jpg?v=1723805476"},"aspect_ratio":1.333,"height":3072,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_Suzuki_K14C_K12_K10_High_output_Coil_pack_ca548d44-0039-489d-a43b-71964ab9de50.jpg?v=1723805476","width":4096},{"alt":"Rzcrew Racing - High-power ignition coils - Suzuki Wagon R Stingray MH55S - RZ-IC-R06A","id":28346297450678,"position":2,"preview_image":{"aspect_ratio":1.388,"height":1153,"width":1600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_High-power_ignition_coil_Dyno_test_on_Honda_K20_696b0d25-a90d-4968-9444-88359dc1fcea.jpg?v=1723805476"},"aspect_ratio":1.388,"height":1153,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_High-power_ignition_coil_Dyno_test_on_Honda_K20_696b0d25-a90d-4968-9444-88359dc1fcea.jpg?v=1723805476","width":1600},{"alt":"Rzcrew Racing - High-power ignition coils - Suzuki Wagon R Stingray MH55S - RZ-IC-R06A","id":28346297483446,"position":3,"preview_image":{"aspect_ratio":0.75,"height":1600,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_High-power_ignition_coil_Dyno_test_installation_on_K_series_engine_82ecefe0-834d-40eb-bcf3-3c6b0cca20fb.jpg?v=1723805476"},"aspect_ratio":0.75,"height":1600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Rzcrew_Racing_High-power_ignition_coil_Dyno_test_installation_on_K_series_engine_82ecefe0-834d-40eb-bcf3-3c6b0cca20fb.jpg?v=1723805476","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Rzcrew Racing\u003cbr\u003ePart Number: RZ-IC-R06A\u003cbr\u003eIgnition Type: Direct Ignition Coil (OEM Ref number 33400-81P00, 33400-63R00)\u003cbr\u003eEngine Type: R06A\u003cbr\u003e\u003cbr\u003eIgnition coils supply the spark plugs with the power to create a spark, causing your engine to combust the air and fuel in the combustion chamber. A quality set of ignition coils will supply your engine with a good spark, reducing the chance of a misfire. \u003cbr\u003e\u003cbr\u003eThe Rzcrew Racing High Ignition Coil Blaster is a direct replacement for the stock units. It produces 2 times more spark energy than stock coils and also generates an ultra fast multi-spark discharge of 5 sparks up to the highest RPM. The spark amperage is increased by 30%, allowing the spark to reach many more molecules and therefore accelerate the ignition and combustion process. This is extremely important in forced induction applications but also improves the performance of normally aspirated engines. Rzcrew Racing High Ignition Coil Blaster will increase horsepower and torque throughout the entire rpm range. This upgrade will also reduce fuel consumption. Even the engines with legendary smoothness will be further refined with the Rzcrew Racing High Ignition Coil Blaster upgrade. Installation is easy. Direct bolt-in to the engine, no splicing or cutting into stock wiring, simply replace the stock coils with our Plasma Direct Coils, and ready to go!\u003cbr\u003eProduct Picture may differ.\u003cbr\u003eOur product Features:\u003cbr\u003e- Improved Combustion\u003cbr\u003e\n- 30% Higher Amperage for the Initial Spark Discharge Increasing Ignition Performance. Increased BHP and Fuel economy\u003cbr\u003e\n- Constantly stabilize provision of the sparks and prevent malfunction, abnormal noises are eliminatedresulting in Improved throttle response and smoothness\u003cbr\u003e\n- High efficiency combustion can be created without missfire at higher boost or in High RPM ranges\u003cbr\u003e\n- Direct Bolt in part \/ No modifications required\u003cbr\u003e\n- 1 Year Warranty\u003cbr\u003e-Compatible with all Rzcrew Racing Coil on plug Kit\u003cbr\u003eDyno tested on our Rzcrew Racing K20 making +5.5WHP and +1.7NM over the stock Genuine Honda Coils\u003cbr\u003e\n- EXCEED OEM PERFORMANCE COILS\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Singaporean Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eWagon R Stingray | MK55S | 2017-2020 | TC | R06A | I3\u003c!--split--\u003e"}

{"id":7303861928118,"title":"Tein Flex Z Coilover Kit - Suzuki Every Van DA17V","handle":"tein-flex-z-coilover-kit-suzuki-every-van-da17v-vsua6-c1bs3","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Tein\u003cbr\u003ePart Number: VSUA6-C1BS3\u003cbr\u003eFront:\n- Damping Adjustable: Yes\n- Full Length Adjustable: Yes\n- Mount: Reinforced Rubber\n- Vehicle Height: -30mm\n- Max Height Adjustment Range: -60~ 0\n- Recommended Height Adjustment Range: -40~ -20\n- Spring Rate: 5kg\n\nRear:\n- Damping Adjustable: Yes\n- Full Length Adjustable: Yes\n- Mount: Reinforced Rubber\n- Vehicle Height: -40mm\n- Max Height Adjustment Range: -55 ~ -30\n- Recommended Height Adjustment Range: -50 ~ -30\n- Spring Rate: 5kg\u003cbr\u003eEDK04-P8021\u003cbr\u003e EDK04-Q0349Features:\u003cbr\u003e\n- Full Length Ride Adjustment with little or no change in ride quality\u003cbr\u003e\n- 16-level dampening force adjustment system\u003cbr\u003e\n- Twin tube structure for strength and comfort\u003cbr\u003e\n- Complete kit with Tein upper mounts (except some models)\u003cbr\u003e\n\u003cbr\u003e\nThe Flex-Z adopts Tein's new \"Sealed Structure\", which has faster production time and costs, allowing the sales cost of the coilovers to be as low as possible.\u003cbr\u003e\nEDFC compatible (EDFCII, ACTIVE and ACTIVE PRO) for remote electronic adjustment of the dampening via commands in the cabin.\u003cbr\u003e\nPowder-coated with Tein's signature green, and coated with \"ZT-Coating\" to keep rust at bay, making them ideal for people living in snowy areas or near the sea.\u003cbr\u003e\n\u003cbr\u003e\nTein Replacement Service:\u003cbr\u003e\nAs the sealed structure does not allow for rebuilding on the damper, Tein set up the Replacement Service, which allows you to get the damper only. Furthermore, you can request custom settings for the damping force specifications and\/or stroke length, to the extent possible.\u003cbr\u003e\nBecause the original damper does not have to be returned, you can purchase and stock several replacement shock absorbers in different specifications for various purposes, not just as replacements for worn-out ones.\u003cbr\u003e\nWarranty:\u003cbr\u003e\nManufacturer's 3 years warranty from purchase, within the range of 60,000Km from installation.\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eEvery Van | DA17V | 2015-2019 | NA | R06A | I3\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2022-04-08T15:08:07+08:00","created_at":"2022-04-08T15:06:06+08:00","vendor":"Tein","type":"Coilovers and Springs","tags":["2015","2016","2017","2018","2019","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","every-van-da17v-2015-2019-na-r06a-i3","JP1","suzuki","tein","ws112"],"price":122487,"price_min":122487,"price_max":122487,"available":true,"price_varies":false,"compare_at_price":136600,"compare_at_price_min":136600,"compare_at_price_max":136600,"compare_at_price_varies":false,"variants":[{"id":41358733705398,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"VSUA6-C1BS3","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Tein Flex Z Coilover Kit - Suzuki Every Van DA17V","public_title":null,"options":["Default Title"],"price":122487,"weight":34000,"compare_at_price":136600,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/tein-flex-z-coilover-kit-suzuki-every-van-da17v-rzcrew.jpg?v=1710320832"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/tein-flex-z-coilover-kit-suzuki-every-van-da17v-rzcrew.jpg?v=1710320832","options":["Title"],"media":[{"alt":"Tein Flex Z Coilover Kit - Suzuki Every Van DA17V - VSUA6-C1BS3 - Rzcrewgarage","id":26480233480374,"position":1,"preview_image":{"aspect_ratio":1.509,"height":795,"width":1200,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/tein-flex-z-coilover-kit-suzuki-every-van-da17v-rzcrew.jpg?v=1710320832"},"aspect_ratio":1.509,"height":795,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/tein-flex-z-coilover-kit-suzuki-every-van-da17v-rzcrew.jpg?v=1710320832","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Tein\u003cbr\u003ePart Number: VSUA6-C1BS3\u003cbr\u003eFront:\n- Damping Adjustable: Yes\n- Full Length Adjustable: Yes\n- Mount: Reinforced Rubber\n- Vehicle Height: -30mm\n- Max Height Adjustment Range: -60~ 0\n- Recommended Height Adjustment Range: -40~ -20\n- Spring Rate: 5kg\n\nRear:\n- Damping Adjustable: Yes\n- Full Length Adjustable: Yes\n- Mount: Reinforced Rubber\n- Vehicle Height: -40mm\n- Max Height Adjustment Range: -55 ~ -30\n- Recommended Height Adjustment Range: -50 ~ -30\n- Spring Rate: 5kg\u003cbr\u003eEDK04-P8021\u003cbr\u003e EDK04-Q0349Features:\u003cbr\u003e\n- Full Length Ride Adjustment with little or no change in ride quality\u003cbr\u003e\n- 16-level dampening force adjustment system\u003cbr\u003e\n- Twin tube structure for strength and comfort\u003cbr\u003e\n- Complete kit with Tein upper mounts (except some models)\u003cbr\u003e\n\u003cbr\u003e\nThe Flex-Z adopts Tein's new \"Sealed Structure\", which has faster production time and costs, allowing the sales cost of the coilovers to be as low as possible.\u003cbr\u003e\nEDFC compatible (EDFCII, ACTIVE and ACTIVE PRO) for remote electronic adjustment of the dampening via commands in the cabin.\u003cbr\u003e\nPowder-coated with Tein's signature green, and coated with \"ZT-Coating\" to keep rust at bay, making them ideal for people living in snowy areas or near the sea.\u003cbr\u003e\n\u003cbr\u003e\nTein Replacement Service:\u003cbr\u003e\nAs the sealed structure does not allow for rebuilding on the damper, Tein set up the Replacement Service, which allows you to get the damper only. Furthermore, you can request custom settings for the damping force specifications and\/or stroke length, to the extent possible.\u003cbr\u003e\nBecause the original damper does not have to be returned, you can purchase and stock several replacement shock absorbers in different specifications for various purposes, not just as replacements for worn-out ones.\u003cbr\u003e\nWarranty:\u003cbr\u003e\nManufacturer's 3 years warranty from purchase, within the range of 60,000Km from installation.\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eEvery Van | DA17V | 2015-2019 | NA | R06A | I3\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}