Forced Induction

{"id":7746663088310,"title":"GCG Turbos GCG28R High Flow Turbo - Toyota - Yaris GR GXPA16","handle":"gcg-turbos-gcg28r-high-flow-turbo-gxpa16-toy17201-18010gtx","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: GCG Turbos\u003cbr\u003eReference Number: TOY17201-18010GTX\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSince its release in 2020, GCG Turbo has been developing a high-power and high-response turbo for the GR Yaris.\u003cbr\u003e\n\n?Turbo that can be installed as a complete bolt-on\u003cbr\u003e\n?Significant performance improvement (over 100ps) compared to the genuine GR Yaris turbo\u003cbr\u003e\u003cbr\u003e\n\nWith these goals in mind, we developed a new compressor wheel and turbine wheel and upgraded the bearing pack in cooperation with leading tuners.\u003cbr\u003e\u003cbr\u003e\n\nAs a result of actually installing it on an actual car and conducting repeated bench tests, we were able to achieve an output of 417ps\/454Nm with the bolt-on turbo, and a significant increase in power across the entire range.\u003cbr\u003e\u003cbr\u003e\n\nchanges\u003cbr\u003e\n?High-flow machined billet compressor wheel for GR Yaris\u003cbr\u003e\n?High-flow half-blade turbine wheel for GR Yaris\u003cbr\u003e\n?Upgraded ball bearing\u003cbr\u003e\n?Machining of compressor housing, turbine housing, and center cartridge\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eYaris GR | GXPA16 | 2020-2025 | TC | G16E-GTS | I3\u003c!--split--\u003e","published_at":"2024-01-09T15:23:37+08:00","created_at":"2024-01-09T15:11:14+08:00","vendor":"GCG Turbos","type":"Turbocharger Kits","tags":["2020","2021","2022","2023","2024","2025","forced-induction","gcg-turbos","GXPA16","jp1","toyota","turbocharger-kits","ws16","yaris-gr-gxpa16-2020-2025-tc-g16e-gts-i3"],"price":448300,"price_min":448300,"price_max":448300,"available":true,"price_varies":false,"compare_at_price":448300,"compare_at_price_min":448300,"compare_at_price_max":448300,"compare_at_price_varies":false,"variants":[{"id":42590700863670,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TOY17201-18010GTX","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"GCG Turbos GCG28R High Flow Turbo - Toyota - Yaris GR GXPA16","public_title":null,"options":["Default Title"],"price":448300,"weight":16000,"compare_at_price":448300,"inventory_quantity":49,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/gcg-turbos-gcg28r-high-flow-turbo-toyota-yaris-gr-gxpa16-rzcrew-1.jpg?v=1710314273","\/\/rzcrewgarage.com\/cdn\/shop\/products\/gcg-turbos-gcg28r-high-flow-turbo-toyota-yaris-gr-gxpa16-rzcrew-2.jpg?v=1710314274"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/gcg-turbos-gcg28r-high-flow-turbo-toyota-yaris-gr-gxpa16-rzcrew-1.jpg?v=1710314273","options":["Title"],"media":[{"alt":"GCG Turbos GCG28R High Flow Turbo - Toyota - Yaris GR GXPA16","id":27027660538038,"position":1,"preview_image":{"aspect_ratio":1.5,"height":640,"width":960,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/gcg-turbos-gcg28r-high-flow-turbo-toyota-yaris-gr-gxpa16-rzcrew-1.jpg?v=1710314273"},"aspect_ratio":1.5,"height":640,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/gcg-turbos-gcg28r-high-flow-turbo-toyota-yaris-gr-gxpa16-rzcrew-1.jpg?v=1710314273","width":960},{"alt":"GCG Turbos GCG28R High Flow Turbo - Toyota - Yaris GR GXPA16","id":27027660570806,"position":2,"preview_image":{"aspect_ratio":2.147,"height":652,"width":1400,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/gcg-turbos-gcg28r-high-flow-turbo-toyota-yaris-gr-gxpa16-rzcrew-2.jpg?v=1710314274"},"aspect_ratio":2.147,"height":652,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/gcg-turbos-gcg28r-high-flow-turbo-toyota-yaris-gr-gxpa16-rzcrew-2.jpg?v=1710314274","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: GCG Turbos\u003cbr\u003eReference Number: TOY17201-18010GTX\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSince its release in 2020, GCG Turbo has been developing a high-power and high-response turbo for the GR Yaris.\u003cbr\u003e\n\n?Turbo that can be installed as a complete bolt-on\u003cbr\u003e\n?Significant performance improvement (over 100ps) compared to the genuine GR Yaris turbo\u003cbr\u003e\u003cbr\u003e\n\nWith these goals in mind, we developed a new compressor wheel and turbine wheel and upgraded the bearing pack in cooperation with leading tuners.\u003cbr\u003e\u003cbr\u003e\n\nAs a result of actually installing it on an actual car and conducting repeated bench tests, we were able to achieve an output of 417ps\/454Nm with the bolt-on turbo, and a significant increase in power across the entire range.\u003cbr\u003e\u003cbr\u003e\n\nchanges\u003cbr\u003e\n?High-flow machined billet compressor wheel for GR Yaris\u003cbr\u003e\n?High-flow half-blade turbine wheel for GR Yaris\u003cbr\u003e\n?Upgraded ball bearing\u003cbr\u003e\n?Machining of compressor housing, turbine housing, and center cartridge\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eYaris GR | GXPA16 | 2020-2025 | TC | G16E-GTS | I3\u003c!--split--\u003e"}

{"id":6570326491318,"title":"Blitz Super Sound Blow Off Valve BR Blow Response Release Type - Toyota Caldina ST215W\/ST246W (1997-2007)","handle":"blitz-super-sound-blow-off-valve-br-blow-response-release-type-toyota-caldina-st215w-st246w-1997-2007-70649","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Universal Blow Off Valves\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eModel: BR (Blow Response)\u003cbr\u003eType: Release (Atmospheric Release)\u003cbr\u003eMaterial:\u003cbr\u003e-Body: Aluminum Die-Cast\u003cbr\u003e-Valve: Lightweight Aluminum Alloy\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003eCan not be installed with Blitz Core-type Air Cleaner Series\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- ST215W: 97\/09-02\/09 GTE only\u003cbr\u003e- ST246W: 02\/09-05\/01 GTE only\u003cbr\u003e- ST246W: 05\/01- GTE only; Strut Tower Bar can not be installed.\u003cbr\u003e- ST205: 94\/02-99\/09 GTE only\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThis item has been designed for improved operation on turbocharged engines. In addition to increasing boost pressure response between shifts it will also help to reduce compressor surge and premature boost leakage. This is the 4th generation version with an accumulation of over 25 years since the original Super Sound blow off valve. Continual refinements have been made for improved manufacturing and operation, new finish has improved anti-corrosion properties and beautiful finish provides stylish engine bay dressup. Refined venturi allows for a significant enhancement of airflow speed for sharp release. Internal spring can be adjusted and spring rate can be changed for different custom applications. Available as atmospheric release type and return type for most applications. Release type kits can be converted to return type with the optional return parts set. Head unit can be used as a direct replacement upgrade on any of the previous version piping\/adapters.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Caldina - ST215W (2000-2002) 3S-GTE\u003cbr\u003eToyota - Caldina - ST215W (1997-2000) 3S-GTE\u003cbr\u003eToyota - Caldina - ST246W (2005-2007) 3S-GTE\u003cbr\u003eToyota - Caldina - ST246W (2002-2004) 3S-GTE\u003c!--split--\u003e","published_at":"2021-03-11T17:41:54+08:00","created_at":"2021-03-11T17:41:55+08:00","vendor":"Blitz","type":"Universal Blow Off Valves","tags":["1997","1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","blitz","caldina-st215w-1997-2002-tc-3s-gte-i4","caldina-st246w-2002-2007-tc-3s-gte-i4","forced-induction","jp1","toyota","universal-blow-off-valves","ws124"],"price":28260,"price_min":28260,"price_max":28260,"available":true,"price_varies":false,"compare_at_price":35400,"compare_at_price_min":35400,"compare_at_price_max":35400,"compare_at_price_varies":false,"variants":[{"id":39339876024502,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"70649","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Blitz Super Sound Blow Off Valve BR Blow Response Release Type - Toyota Caldina ST215W\/ST246W (1997-2007)","public_title":null,"options":["Default Title"],"price":28260,"weight":3000,"compare_at_price":35400,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/blitz-super-sound-blow-off-valve-br-blow-response-release-type-toyota-caldina-st215wst246w-1997-2007-rzcrew.jpg?v=1710326266"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/blitz-super-sound-blow-off-valve-br-blow-response-release-type-toyota-caldina-st215wst246w-1997-2007-rzcrew.jpg?v=1710326266","options":["Title"],"media":[{"alt":"Blitz Super Sound Blow Off Valve BR Blow Response Release Type - Toyota Caldina ST215W\/ST246W (1997-2007) - 70649 - Rzcrewgarage","id":22330913882294,"position":1,"preview_image":{"aspect_ratio":1.5,"height":1600,"width":2400,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/blitz-super-sound-blow-off-valve-br-blow-response-release-type-toyota-caldina-st215wst246w-1997-2007-rzcrew.jpg?v=1710326266"},"aspect_ratio":1.5,"height":1600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/blitz-super-sound-blow-off-valve-br-blow-response-release-type-toyota-caldina-st215wst246w-1997-2007-rzcrew.jpg?v=1710326266","width":2400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Universal Blow Off Valves\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eModel: BR (Blow Response)\u003cbr\u003eType: Release (Atmospheric Release)\u003cbr\u003eMaterial:\u003cbr\u003e-Body: Aluminum Die-Cast\u003cbr\u003e-Valve: Lightweight Aluminum Alloy\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003eCan not be installed with Blitz Core-type Air Cleaner Series\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- ST215W: 97\/09-02\/09 GTE only\u003cbr\u003e- ST246W: 02\/09-05\/01 GTE only\u003cbr\u003e- ST246W: 05\/01- GTE only; Strut Tower Bar can not be installed.\u003cbr\u003e- ST205: 94\/02-99\/09 GTE only\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThis item has been designed for improved operation on turbocharged engines. In addition to increasing boost pressure response between shifts it will also help to reduce compressor surge and premature boost leakage. This is the 4th generation version with an accumulation of over 25 years since the original Super Sound blow off valve. Continual refinements have been made for improved manufacturing and operation, new finish has improved anti-corrosion properties and beautiful finish provides stylish engine bay dressup. Refined venturi allows for a significant enhancement of airflow speed for sharp release. Internal spring can be adjusted and spring rate can be changed for different custom applications. Available as atmospheric release type and return type for most applications. Release type kits can be converted to return type with the optional return parts set. Head unit can be used as a direct replacement upgrade on any of the previous version piping\/adapters.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Caldina - ST215W (2000-2002) 3S-GTE\u003cbr\u003eToyota - Caldina - ST215W (1997-2000) 3S-GTE\u003cbr\u003eToyota - Caldina - ST246W (2005-2007) 3S-GTE\u003cbr\u003eToyota - Caldina - ST246W (2002-2004) 3S-GTE\u003c!--split--\u003e"}

{"id":6570326556854,"title":"Blitz Super Sound Blow Off Valve BR Blow Response Release Type - Toyota Celica GT-Four ST205 (1994-1999)","handle":"blitz-super-sound-blow-off-valve-br-blow-response-release-type-toyota-celica-gt-four-st205-1994-1999-70649","description":"SPECIFICATIONS\u003cbr\u003eManufacturer: Universal Blow Off Valves\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eModel: BR (Blow Response)\u003cbr\u003eType: Release (Atmospheric Release)\u003cbr\u003eMaterial:\u003cbr\u003e-Body: Aluminum Die-Cast\u003cbr\u003e-Valve: Lightweight Aluminum Alloy\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003eCan not be installed with Blitz Core-type Air Cleaner Series\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- ST215W: 97\/09-02\/09 GTE only\u003cbr\u003e- ST246W: 02\/09-05\/01 GTE only\u003cbr\u003e- ST246W: 05\/01- GTE only; Strut Tower Bar can not be installed.\u003cbr\u003e- ST205: 94\/02-99\/09 GTE only\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThis item has been designed for improved operation on turbocharged engines. In addition to increasing boost pressure response between shifts it will also help to reduce compressor surge and premature boost leakage. This is the 4th generation version with an accumulation of over 25 years since the original Super Sound blow off valve. Continual refinements have been made for improved manufacturing and operation, new finish has improved anti-corrosion properties and beautiful finish provides stylish engine bay dressup. Refined venturi allows for a significant enhancement of airflow speed for sharp release. Internal spring can be adjusted and spring rate can be changed for different custom applications. Available as atmospheric release type and return type for most applications. Release type kits can be converted to return type with the optional return parts set. Head unit can be used as a direct replacement upgrade on any of the previous version piping\/adapters.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Celica GT-Four - ST205 (1994-1997) 3S-GTE\u003cbr\u003eToyota - Celica GT-Four - ST205 (1997-1999) 3S-GTE\u003c!--split--\u003e","published_at":"2021-03-11T17:41:56+08:00","created_at":"2021-03-11T17:41:56+08:00","vendor":"Blitz","type":"Universal Blow Off Valves","tags":["1994","1995","1996","1997","1998","1999","blitz","celica-gt-four-st205-1993-1999-tc-3s-gte-i4","forced-induction","jp1","toyota","universal-blow-off-valves","ws124"],"price":28260,"price_min":28260,"price_max":28260,"available":true,"price_varies":false,"compare_at_price":35400,"compare_at_price_min":35400,"compare_at_price_max":35400,"compare_at_price_varies":false,"variants":[{"id":39339876090038,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"70649","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Blitz Super Sound Blow Off Valve BR Blow Response Release Type - Toyota Celica GT-Four ST205 (1994-1999)","public_title":null,"options":["Default Title"],"price":28260,"weight":3000,"compare_at_price":35400,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/blitz-super-sound-blow-off-valve-br-blow-response-release-type-toyota-celica-gt-four-st205-1994-1999-rzcrew.jpg?v=1710326266"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/blitz-super-sound-blow-off-valve-br-blow-response-release-type-toyota-celica-gt-four-st205-1994-1999-rzcrew.jpg?v=1710326266","options":["Title"],"media":[{"alt":"Blitz Super Sound Blow Off Valve BR Blow Response Release Type - Toyota Celica GT-Four ST205 (1994-1999) - 70649 - Rzcrewgarage","id":22330913947830,"position":1,"preview_image":{"aspect_ratio":1.5,"height":1600,"width":2400,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/blitz-super-sound-blow-off-valve-br-blow-response-release-type-toyota-celica-gt-four-st205-1994-1999-rzcrew.jpg?v=1710326266"},"aspect_ratio":1.5,"height":1600,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/blitz-super-sound-blow-off-valve-br-blow-response-release-type-toyota-celica-gt-four-st205-1994-1999-rzcrew.jpg?v=1710326266","width":2400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS\u003cbr\u003eManufacturer: Universal Blow Off Valves\u003cbr\u003ePosition: \u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eModel: BR (Blow Response)\u003cbr\u003eType: Release (Atmospheric Release)\u003cbr\u003eMaterial:\u003cbr\u003e-Body: Aluminum Die-Cast\u003cbr\u003e-Valve: Lightweight Aluminum Alloy\u003cbr\u003eIncluded: \u003cbr\u003e-Head unit\u003cbr\u003e-Vehicle specific pipe\u003cbr\u003e-Hoses, Clams, Fittings for installation\u003cbr\u003e\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003eCan not be installed with Blitz Core-type Air Cleaner Series\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY NOTES:\u003cbr\u003e- ST215W: 97\/09-02\/09 GTE only\u003cbr\u003e- ST246W: 02\/09-05\/01 GTE only\u003cbr\u003e- ST246W: 05\/01- GTE only; Strut Tower Bar can not be installed.\u003cbr\u003e- ST205: 94\/02-99\/09 GTE only\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThis item has been designed for improved operation on turbocharged engines. In addition to increasing boost pressure response between shifts it will also help to reduce compressor surge and premature boost leakage. This is the 4th generation version with an accumulation of over 25 years since the original Super Sound blow off valve. Continual refinements have been made for improved manufacturing and operation, new finish has improved anti-corrosion properties and beautiful finish provides stylish engine bay dressup. Refined venturi allows for a significant enhancement of airflow speed for sharp release. Internal spring can be adjusted and spring rate can be changed for different custom applications. Available as atmospheric release type and return type for most applications. Release type kits can be converted to return type with the optional return parts set. Head unit can be used as a direct replacement upgrade on any of the previous version piping\/adapters.\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual Kits may differ.\u003cbr\u003eCar Fitment may change depending on the year, ABS equipped and trim. Please contact us if you are unsure.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eToyota - Celica GT-Four - ST205 (1994-1997) 3S-GTE\u003cbr\u003eToyota - Celica GT-Four - ST205 (1997-1999) 3S-GTE\u003c!--split--\u003e"}

{"id":430830714907,"title":"Trust Greddy Type LS Front Mount Intercooler Kit - Toyota - Crown JZS171 T","handle":"type-ls-front-mount-intercooler-kit-jzs171-t-12010467","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Trust Greddy\u003cbr\u003eReference Number: 12010467\u003cbr\u003e\u003cbr\u003eThe Type LS intercooler kit by Greddy is the entry level yet it is recommended for most street and midly tuned street cars. Its lightweight design is achieved using greddy Technology. This product includes intercooler and mirror polished intake pipes kit. It features Balanced cooling performance and response performance at a high level.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 4 left in stock!\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCrown | JZS171 T | 1999-2003 | TT | 1JZ-GTE | I6\u003c!--split--\u003eCrown | JZS171 T | 1999-2003 | TT | 1JZ-GTE | I6","published_at":"2017-12-11T20:25:31+08:00","created_at":"2017-12-11T20:25:31+08:00","vendor":"Trust Greddy","type":"Intercooler Kits","tags":["1999","2000","2001","2002","2003","crown-jzs171-t-1999-2003-tt-1jz-gte-i6","forced-induction","intercooler-kits","jp1","JZS171 T","toyota","trust-greddy","ws131"],"price":62040,"price_min":62040,"price_max":62040,"available":true,"price_varies":false,"compare_at_price":84800,"compare_at_price_min":84800,"compare_at_price_max":84800,"compare_at_price_varies":false,"variants":[{"id":5180298821659,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"12010467","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Trust Greddy Type LS Front Mount Intercooler Kit - Toyota - Crown JZS171 T","public_title":null,"options":["Default Title"],"price":62040,"weight":28000,"compare_at_price":84800,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/GReddy_Type_LS_intercooler_kit_5d6e20d5-6787-4873-9fc4-4155c8072cf6.jpg?v=1710151804"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/GReddy_Type_LS_intercooler_kit_5d6e20d5-6787-4873-9fc4-4155c8072cf6.jpg?v=1710151804","options":["Title"],"media":[{"alt":"Trust Greddy Type LS Front Mount Intercooler Kit - Toyota - Crown JZS171 T","id":22805868937398,"position":1,"preview_image":{"aspect_ratio":1.5,"height":200,"width":300,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/GReddy_Type_LS_intercooler_kit_5d6e20d5-6787-4873-9fc4-4155c8072cf6.jpg?v=1710151804"},"aspect_ratio":1.5,"height":200,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/GReddy_Type_LS_intercooler_kit_5d6e20d5-6787-4873-9fc4-4155c8072cf6.jpg?v=1710151804","width":300}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Trust Greddy\u003cbr\u003eReference Number: 12010467\u003cbr\u003e\u003cbr\u003eThe Type LS intercooler kit by Greddy is the entry level yet it is recommended for most street and midly tuned street cars. Its lightweight design is achieved using greddy Technology. This product includes intercooler and mirror polished intake pipes kit. It features Balanced cooling performance and response performance at a high level.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 4 left in stock!\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eCrown | JZS171 T | 1999-2003 | TT | 1JZ-GTE | I6\u003c!--split--\u003eCrown | JZS171 T | 1999-2003 | TT | 1JZ-GTE | I6"}

{"id":8284194668726,"title":"Trust Greddy Intercooler and piping kit Toyota - Yaris GR GXPA16","handle":"trust-greddy-intercooler-and-piping-kit-toyota-yaris-gr-gxpa16-12010215","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Trust Greddy\u003cbr\u003eReference Number: 12010215\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eUses an offset inner fin that is approximately 1.2 times larger than the original core (core size: H141\/L625\/W100).\u003cbr\u003e\nBy replacing the turbine outlet to throttle with an aluminum pipe (with air tube), expansion and deformation that occurs with the original rubber hose and plastic pipe is suppressed, allowing air to be sent to the engine stably.\u003cbr\u003e\nThe joint parts use GReddy silicone hoses, which are highly heat-resistant, pressure-resistant, ozone-resistant, and resistant to deterioration.\u003cbr\u003e\u003cbr\u003e\n There are two types: a set that includes a pipe (air tube) that connects to the throttle body, and a set that does not include an air tube (uses the original air tube).\u003cbr\u003e\n\nEstimated working time: 7.0 hours with air tube, 4.0 hours with genuine air tube\u003cbr\u003e\n\n \n\n[Product configuration]\u003cbr\u003e\nCore body (H141\/L625\/W100)\u003cbr\u003e\nPipe body 50?\u003cbr\u003e\nAir tube (included only with CODE: 12010215)\u003cbr\u003e\nSilicone hose\u003cbr\u003e\nHose band\u003cbr\u003e\nDedicated stay set\u003cbr\u003e\nOther short parts\u003cbr\u003e\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eYaris GR | GXPA16 | 2020-2025 | TC | G16E-GTS | I3\u003c!--split--\u003e","published_at":"2025-08-20T13:56:50+08:00","created_at":"2025-08-20T13:56:51+08:00","vendor":"Trust Greddy","type":"Intercooler Kits","tags":["2020","2021","2022","2023","2024","2025","autopostr_facebook_73913","autopostr_instagram_73914","forced-induction","GXPA16","intercooler-kits","JP1","random","toyota","trust-greddy","ws114","yaris-gr-gxpa16-2020-2025-tc-g16e-gts-i3"],"price":184900,"price_min":184900,"price_max":184900,"available":true,"price_varies":false,"compare_at_price":184900,"compare_at_price_min":184900,"compare_at_price_max":184900,"compare_at_price_varies":false,"variants":[{"id":44211793330358,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"12010215","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Trust Greddy Intercooler and piping kit Toyota - Yaris GR GXPA16","public_title":null,"options":["Default Title"],"price":184900,"weight":17100,"compare_at_price":184900,"inventory_quantity":49,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/12010215_385bbff9-95eb-4d0b-9061-a0a0e3e31c66.webp?v=1755670238"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/12010215_385bbff9-95eb-4d0b-9061-a0a0e3e31c66.webp?v=1755670238","options":["Title"],"media":[{"alt":"Trust Greddy Intercooler and piping kit Toyota - Yaris GR GXPA16","id":30243910910134,"position":1,"preview_image":{"aspect_ratio":1.5,"height":548,"width":822,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/12010215_385bbff9-95eb-4d0b-9061-a0a0e3e31c66.webp?v=1755670238"},"aspect_ratio":1.5,"height":548,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/12010215_385bbff9-95eb-4d0b-9061-a0a0e3e31c66.webp?v=1755670238","width":822}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Trust Greddy\u003cbr\u003eReference Number: 12010215\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eUses an offset inner fin that is approximately 1.2 times larger than the original core (core size: H141\/L625\/W100).\u003cbr\u003e\nBy replacing the turbine outlet to throttle with an aluminum pipe (with air tube), expansion and deformation that occurs with the original rubber hose and plastic pipe is suppressed, allowing air to be sent to the engine stably.\u003cbr\u003e\nThe joint parts use GReddy silicone hoses, which are highly heat-resistant, pressure-resistant, ozone-resistant, and resistant to deterioration.\u003cbr\u003e\u003cbr\u003e\n There are two types: a set that includes a pipe (air tube) that connects to the throttle body, and a set that does not include an air tube (uses the original air tube).\u003cbr\u003e\n\nEstimated working time: 7.0 hours with air tube, 4.0 hours with genuine air tube\u003cbr\u003e\n\n \n\n[Product configuration]\u003cbr\u003e\nCore body (H141\/L625\/W100)\u003cbr\u003e\nPipe body 50?\u003cbr\u003e\nAir tube (included only with CODE: 12010215)\u003cbr\u003e\nSilicone hose\u003cbr\u003e\nHose band\u003cbr\u003e\nDedicated stay set\u003cbr\u003e\nOther short parts\u003cbr\u003e\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eYaris GR | GXPA16 | 2020-2025 | TC | G16E-GTS | I3\u003c!--split--\u003e"}

{"id":8284194635958,"title":"Wagner Intercooler and piping kit - Toyota - Yaris GR GXPA16","handle":"wagner-intercooler-and-piping-kit-toyota-yaris-gr-gxpa16-200001179","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Wagner\u003cbr\u003eReference Number: 200001179\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe WAGNERTUNING high-performance intercooler has got a new competition core (tube fin) with the dimensions 630 mm x 137 mm x 135 mm + 630 mm x 43 mm x 100 mm (stepped core: 14,36 liters) \/ 24,8Inch x 5,4Inch x 5,3Inch + 24,8Inch x 1,7Inch x 3,94Inch (stepped core: 876Inch³) , which was developed especially for the requirements of the Toyota GR Yaris. This high-performance core offers an 24 % larger frontal surface and 69 % more core volume compared to the stock intercooler.\u003cbr\u003e\u003cbr\u003e\n\n\u003cbr\u003eThe aluminium cast endtanks were designed in CAD and optimised in CFD simulations (for an ideal internal airflow). The result is a excellent cooling property with a minimal back pressure. The newly developed performance core provides the adjoining components (for example the watercooler) enough air flow by using a specially prepared air baffle. That`s why this kit is perfect for racing use. An optimal cooling effect of the charged air with a significant increase in performance!\u003cbr\u003e\u003cbr\u003e\n\nAn anti-corrosion powder coating with perfect heat-conducting properties protects the WAGNERTUNING intercooler from all environmental influences, so a lasting and optimal cooling effect can be guaranteed. The installation is done by replacing the original intercooler and is easy to perform (plug and play). All our products are subject to a continuous quality monitoring.\u003cbr\u003e\n\nInlet and outlet diameters have been increased to Ø60mm (Ø2,36inch). Therefore this kit includes reinforced silicone hoses as well as an aluminium boost and charge pipe.\u003cbr\u003e\u003cbr\u003e\n\nDetails stock intercooler:\u003cbr\u003e\nV = 8,5 L \/ 519Inch³\u003cbr\u003e\nA = 913 cm² \/ 141Inch²\u003cbr\u003e\u003cbr\u003e\n\nDetails WAGNERTUNING intercooler:\u003cbr\u003e\nV = 14,36 L \/ 876Inch³ (+69%)\u003cbr\u003e\nA = 1134 cm² \/ 176Inch² (+24%)\u003cbr\u003e\u003cbr\u003e\n\nThis kit comes with:\u003cbr\u003e\n1 intercooler\u003cbr\u003e\n3 silicone hoses (black)\u003cbr\u003e\n1 boost pipe\u003cbr\u003e\n1 charge pipe\u003cbr\u003e\n1 mounting material\u003cbr\u003e\n1 installation instruction\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our European Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eYaris GR | GXPA16 | 2020-2025 | TC | G16E-GTS | I3\u003c!--split--\u003e","published_at":"2025-08-20T13:56:48+08:00","created_at":"2025-08-20T13:56:48+08:00","vendor":"Wagner","type":"Intercooler Kits","tags":["2020","2021","2022","2023","2024","2025","forced-induction","GXPA16","intercooler-kits","toyota","UK1","wagner","ws18","yaris-gr-gxpa16-2020-2025-tc-g16e-gts-i3"],"price":212000,"price_min":212000,"price_max":212000,"available":true,"price_varies":false,"compare_at_price":212000,"compare_at_price_min":212000,"compare_at_price_max":212000,"compare_at_price_varies":false,"variants":[{"id":44211793297590,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"200001179","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Wagner Intercooler and piping kit - Toyota - Yaris GR GXPA16","public_title":null,"options":["Default Title"],"price":212000,"weight":17100,"compare_at_price":212000,"inventory_quantity":49,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/200001179.PIPE_752773fb-2a6e-4c11-a07f-2733b081490c.jpg?v=1755670236"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/200001179.PIPE_752773fb-2a6e-4c11-a07f-2733b081490c.jpg?v=1755670236","options":["Title"],"media":[{"alt":"Wagner Intercooler and piping kit - Toyota - Yaris GR GXPA16","id":30243910615222,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/200001179.PIPE_752773fb-2a6e-4c11-a07f-2733b081490c.jpg?v=1755670236"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/200001179.PIPE_752773fb-2a6e-4c11-a07f-2733b081490c.jpg?v=1755670236","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Wagner\u003cbr\u003eReference Number: 200001179\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe WAGNERTUNING high-performance intercooler has got a new competition core (tube fin) with the dimensions 630 mm x 137 mm x 135 mm + 630 mm x 43 mm x 100 mm (stepped core: 14,36 liters) \/ 24,8Inch x 5,4Inch x 5,3Inch + 24,8Inch x 1,7Inch x 3,94Inch (stepped core: 876Inch³) , which was developed especially for the requirements of the Toyota GR Yaris. This high-performance core offers an 24 % larger frontal surface and 69 % more core volume compared to the stock intercooler.\u003cbr\u003e\u003cbr\u003e\n\n\u003cbr\u003eThe aluminium cast endtanks were designed in CAD and optimised in CFD simulations (for an ideal internal airflow). The result is a excellent cooling property with a minimal back pressure. The newly developed performance core provides the adjoining components (for example the watercooler) enough air flow by using a specially prepared air baffle. That`s why this kit is perfect for racing use. An optimal cooling effect of the charged air with a significant increase in performance!\u003cbr\u003e\u003cbr\u003e\n\nAn anti-corrosion powder coating with perfect heat-conducting properties protects the WAGNERTUNING intercooler from all environmental influences, so a lasting and optimal cooling effect can be guaranteed. The installation is done by replacing the original intercooler and is easy to perform (plug and play). All our products are subject to a continuous quality monitoring.\u003cbr\u003e\n\nInlet and outlet diameters have been increased to Ø60mm (Ø2,36inch). Therefore this kit includes reinforced silicone hoses as well as an aluminium boost and charge pipe.\u003cbr\u003e\u003cbr\u003e\n\nDetails stock intercooler:\u003cbr\u003e\nV = 8,5 L \/ 519Inch³\u003cbr\u003e\nA = 913 cm² \/ 141Inch²\u003cbr\u003e\u003cbr\u003e\n\nDetails WAGNERTUNING intercooler:\u003cbr\u003e\nV = 14,36 L \/ 876Inch³ (+69%)\u003cbr\u003e\nA = 1134 cm² \/ 176Inch² (+24%)\u003cbr\u003e\u003cbr\u003e\n\nThis kit comes with:\u003cbr\u003e\n1 intercooler\u003cbr\u003e\n3 silicone hoses (black)\u003cbr\u003e\n1 boost pipe\u003cbr\u003e\n1 charge pipe\u003cbr\u003e\n1 mounting material\u003cbr\u003e\n1 installation instruction\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our European Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eYaris GR | GXPA16 | 2020-2025 | TC | G16E-GTS | I3\u003c!--split--\u003e"}

{"id":8284194603190,"title":"HKS Water spray bracket Toyota - Yaris GR GXPA16","handle":"hks-water-spray-bracket-toyota-yaris-gr-gxpa16-13999-at001","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 13999-AT001\u003cbr\u003e\u003cbr\u003eIntercooler\u003cbr\u003e\u003cbr\u003eThe core area has been increased by 22.4% compared to the original, expanding the area exposed to the wind while driving and improving cooling performance.\nBy increasing the core capacity, it can handle everything from boost up to turbo replacement.\nThis layout allows installation even with genuine piping.\u003cbr\u003e\u003cbr\u003eNotes\u003cbr\u003e\n*1. To install the intercooler assembly, it is necessary to modify the air guide inside the bumper and relocate the outside air temperature sensor. There is no modification to the reinforcement.\u003cbr\u003e\n*2. To install the piping, it is necessary to cut the bracket on the vehicle body.\u003cbr\u003e\n*3. For the FULL KIT, the measures (*1) and (*2) are required.\u003cbr\u003e\u003cbr\u003eOutput: 245kW (333PS\/6500rpm)\u003cbr\u003e\nTorque: 449.5Nm\u003cbr\u003e\n(45.9kgm)\/3260rpm\u003cbr\u003e\nCooling performance: I\/C outlet 30.3?\u003cbr\u003e\n(7000rpm)\u003cbr\u003e\nCooling efficiency: 88% (7000rpm)\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eYaris GR | GXPA16 | 2020-2025 | TC | G16E-GTS | I3\u003c!--split--\u003e","published_at":"2025-08-20T13:56:45+08:00","created_at":"2025-08-20T13:56:45+08:00","vendor":"HKS","type":"Intercooler Kits","tags":["2020","2021","2022","2023","2024","2025","forced-induction","GXPA16","hks","intercooler-kits","JP1","toyota","ws16","yaris-gr-gxpa16-2020-2025-tc-g16e-gts-i3"],"price":7300,"price_min":7300,"price_max":7300,"available":true,"price_varies":false,"compare_at_price":7300,"compare_at_price_min":7300,"compare_at_price_max":7300,"compare_at_price_varies":false,"variants":[{"id":44211793264822,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"13999-AT001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Water spray bracket Toyota - Yaris GR GXPA16","public_title":null,"options":["Default Title"],"price":7300,"weight":3000,"compare_at_price":7300,"inventory_quantity":49,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/13999-AT001_d8521bb3-31c7-415f-9078-183698cce03a.jpg?v=1755670234"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/13999-AT001_d8521bb3-31c7-415f-9078-183698cce03a.jpg?v=1755670234","options":["Title"],"media":[{"alt":"HKS Water spray bracket Toyota - Yaris GR GXPA16","id":30243910222006,"position":1,"preview_image":{"aspect_ratio":1.0,"height":640,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/13999-AT001_d8521bb3-31c7-415f-9078-183698cce03a.jpg?v=1755670234"},"aspect_ratio":1.0,"height":640,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/13999-AT001_d8521bb3-31c7-415f-9078-183698cce03a.jpg?v=1755670234","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 13999-AT001\u003cbr\u003e\u003cbr\u003eIntercooler\u003cbr\u003e\u003cbr\u003eThe core area has been increased by 22.4% compared to the original, expanding the area exposed to the wind while driving and improving cooling performance.\nBy increasing the core capacity, it can handle everything from boost up to turbo replacement.\nThis layout allows installation even with genuine piping.\u003cbr\u003e\u003cbr\u003eNotes\u003cbr\u003e\n*1. To install the intercooler assembly, it is necessary to modify the air guide inside the bumper and relocate the outside air temperature sensor. There is no modification to the reinforcement.\u003cbr\u003e\n*2. To install the piping, it is necessary to cut the bracket on the vehicle body.\u003cbr\u003e\n*3. For the FULL KIT, the measures (*1) and (*2) are required.\u003cbr\u003e\u003cbr\u003eOutput: 245kW (333PS\/6500rpm)\u003cbr\u003e\nTorque: 449.5Nm\u003cbr\u003e\n(45.9kgm)\/3260rpm\u003cbr\u003e\nCooling performance: I\/C outlet 30.3?\u003cbr\u003e\n(7000rpm)\u003cbr\u003e\nCooling efficiency: 88% (7000rpm)\u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eYaris GR | GXPA16 | 2020-2025 | TC | G16E-GTS | I3\u003c!--split--\u003e"}

{"id":8284194570422,"title":"HKS Piping Kit 13002-AT002 Toyota - Yaris GR GXPA16","handle":"hks-piping-kit-13002-at002-toyota-yaris-gr-gxpa16-13002-at002","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 13002-AT002\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBoost-up specification prevents piping from coming loose and improves response.\u003cbr\u003e\nMust be used with Piping Kit (13002-AT002) when installing on vehicles after 24\/04 model change.\u003cbr\u003e\nWater spray bracket (13999-AT001) is required for use with stock intercooler water spray.\u003cbr\u003e\nFeatures\u003cbr\u003e\nTo accommodate higher output, the diameter has been increased from the stock ?45 to ?50. In addition, the layout has been designed to minimize bends, thereby reducing pressure loss.\nBy replacing the parts where the stock hose is prone to coming loose with aluminum pipes, the piping is prevented from coming loose while driving.\nBecause the \"3-cylinder engine\" is subject to a lot of vibration, a \"4P molded silicone hose\" is used to achieve high pressure resistance and vibration absorption.\nBy replacing the plastic pipes with aluminum pipes, durability is ensured when boosting up.\nWe have achieved a layout design that can be installed on both the HKS intercooler and the genuine intercooler.\nWe have created a layout design that is also suitable for customers using SQV.\u003cbr\u003e\u003cbr\u003e\n \nProduct composition\u003cbr\u003e\n1 inlet pipe\u003cbr\u003e\n2 outlet pipes\u003cbr\u003e\n4 silicone hoses\u003cbr\u003e\n \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eYaris GR | GXPA16 | 2020-2025 | TC | G16E-GTS | I3\u003c!--split--\u003e","published_at":"2025-08-20T13:56:43+08:00","created_at":"2025-08-20T13:56:43+08:00","vendor":"HKS","type":"Intercooler Kits","tags":["2020","2021","2022","2023","2024","2025","forced-induction","GXPA16","hks","intercooler-kits","JP1","toyota","ws16","yaris-gr-gxpa16-2020-2025-tc-g16e-gts-i3"],"price":91400,"price_min":91400,"price_max":91400,"available":true,"price_varies":false,"compare_at_price":91400,"compare_at_price_min":91400,"compare_at_price_max":91400,"compare_at_price_varies":false,"variants":[{"id":44211793232054,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"13002-AT002","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Piping Kit 13002-AT002 Toyota - Yaris GR GXPA16","public_title":null,"options":["Default Title"],"price":91400,"weight":8000,"compare_at_price":91400,"inventory_quantity":49,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/img13002-at002-0_006085c4-9ca9-447d-be48-a3a3f4e5c192.webp?v=1755670232"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/img13002-at002-0_006085c4-9ca9-447d-be48-a3a3f4e5c192.webp?v=1755670232","options":["Title"],"media":[{"alt":"HKS Piping Kit 13002-AT002 Toyota - Yaris GR GXPA16","id":30243909959862,"position":1,"preview_image":{"aspect_ratio":1.301,"height":712,"width":926,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/img13002-at002-0_006085c4-9ca9-447d-be48-a3a3f4e5c192.webp?v=1755670232"},"aspect_ratio":1.301,"height":712,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/img13002-at002-0_006085c4-9ca9-447d-be48-a3a3f4e5c192.webp?v=1755670232","width":926}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 13002-AT002\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBoost-up specification prevents piping from coming loose and improves response.\u003cbr\u003e\nMust be used with Piping Kit (13002-AT002) when installing on vehicles after 24\/04 model change.\u003cbr\u003e\nWater spray bracket (13999-AT001) is required for use with stock intercooler water spray.\u003cbr\u003e\nFeatures\u003cbr\u003e\nTo accommodate higher output, the diameter has been increased from the stock ?45 to ?50. In addition, the layout has been designed to minimize bends, thereby reducing pressure loss.\nBy replacing the parts where the stock hose is prone to coming loose with aluminum pipes, the piping is prevented from coming loose while driving.\nBecause the \"3-cylinder engine\" is subject to a lot of vibration, a \"4P molded silicone hose\" is used to achieve high pressure resistance and vibration absorption.\nBy replacing the plastic pipes with aluminum pipes, durability is ensured when boosting up.\nWe have achieved a layout design that can be installed on both the HKS intercooler and the genuine intercooler.\nWe have created a layout design that is also suitable for customers using SQV.\u003cbr\u003e\u003cbr\u003e\n \nProduct composition\u003cbr\u003e\n1 inlet pipe\u003cbr\u003e\n2 outlet pipes\u003cbr\u003e\n4 silicone hoses\u003cbr\u003e\n \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eYaris GR | GXPA16 | 2020-2025 | TC | G16E-GTS | I3\u003c!--split--\u003e"}

{"id":8284194537654,"title":"HKS Intercooler kit - Toyota - Yaris GR GXPA16","handle":"hks-intercooler-kit-toyota-yaris-gr-gxpa16-13001-at008","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 13001-AT008\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe concept is OEM fitment for GR Yaris but also improved cooling performance.\nAlthough it is a stock replacement, we designed it bigger for future power improvement. It is also effective when driving on the tracks. The use of a new multilayer core minimizes weight, reduces pressure loss, and improves cooling performance.\u003cbr\u003e\u003cbr\u003eFor HKS I\/C, *Can be installed on vehicles with minor changes from April 2024 onwards\u003cbr\u003eIt is a stock replacement but with increased height and thickness to provide improved cooling performance for modified high power GR Yaris.\nThe core is thicker than stock, but the fin shape is optimized to deliver cooling performance and airflow through it.\nHKS intercooler core size is 645x205x105 (stock is 645x145x80). Made in Japan\", laminated type core is used for reliability and performance.\n \n\n \n\nAt the mid to high rpm range (maximum power produced range), the HKS intercooler offers an excellent cooling performance. Increase vehicle performance while maintaining OEM fitment and advantage in terms of power and torque.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eYaris GR | GXPA16 | 2020-2025 | TC | G16E-GTS | I3\u003c!--split--\u003e","published_at":"2025-08-20T13:56:40+08:00","created_at":"2025-08-20T13:56:40+08:00","vendor":"HKS","type":"Intercooler Kits","tags":["2020","2021","2022","2023","2024","2025","forced-induction","GXPA16","hks","intercooler-kits","JP1","toyota","ws16","yaris-gr-gxpa16-2020-2025-tc-g16e-gts-i3"],"price":226500,"price_min":226500,"price_max":226500,"available":true,"price_varies":false,"compare_at_price":226500,"compare_at_price_min":226500,"compare_at_price_max":226500,"compare_at_price_varies":false,"variants":[{"id":44211793199286,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"13001-AT008","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS Intercooler kit - Toyota - Yaris GR GXPA16","public_title":null,"options":["Default Title"],"price":226500,"weight":17100,"compare_at_price":226500,"inventory_quantity":49,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/v-vision_13999-at001_73db9850-25e5-4a3e-9cf9-e8727b9936ed.jpg?v=1755670230","\/\/rzcrewgarage.com\/cdn\/shop\/files\/0Y6zJWQbO2tRrw8x9Ss1L99P6ZtM8CdUhVh8gvKO_8826dfeb-6dad-40ea-bb39-99197e98b0f6.jpg?v=1755670230"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/v-vision_13999-at001_73db9850-25e5-4a3e-9cf9-e8727b9936ed.jpg?v=1755670230","options":["Title"],"media":[{"alt":"HKS Intercooler kit - Toyota - Yaris GR GXPA16","id":30243909697718,"position":1,"preview_image":{"aspect_ratio":1.0,"height":640,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/v-vision_13999-at001_73db9850-25e5-4a3e-9cf9-e8727b9936ed.jpg?v=1755670230"},"aspect_ratio":1.0,"height":640,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/v-vision_13999-at001_73db9850-25e5-4a3e-9cf9-e8727b9936ed.jpg?v=1755670230","width":640},{"alt":"HKS Intercooler kit - Toyota - Yaris GR GXPA16","id":30243909730486,"position":2,"preview_image":{"aspect_ratio":2.0,"height":320,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/0Y6zJWQbO2tRrw8x9Ss1L99P6ZtM8CdUhVh8gvKO_8826dfeb-6dad-40ea-bb39-99197e98b0f6.jpg?v=1755670230"},"aspect_ratio":2.0,"height":320,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/0Y6zJWQbO2tRrw8x9Ss1L99P6ZtM8CdUhVh8gvKO_8826dfeb-6dad-40ea-bb39-99197e98b0f6.jpg?v=1755670230","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 13001-AT008\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe concept is OEM fitment for GR Yaris but also improved cooling performance.\nAlthough it is a stock replacement, we designed it bigger for future power improvement. It is also effective when driving on the tracks. The use of a new multilayer core minimizes weight, reduces pressure loss, and improves cooling performance.\u003cbr\u003e\u003cbr\u003eFor HKS I\/C, *Can be installed on vehicles with minor changes from April 2024 onwards\u003cbr\u003eIt is a stock replacement but with increased height and thickness to provide improved cooling performance for modified high power GR Yaris.\nThe core is thicker than stock, but the fin shape is optimized to deliver cooling performance and airflow through it.\nHKS intercooler core size is 645x205x105 (stock is 645x145x80). Made in Japan\", laminated type core is used for reliability and performance.\n \n\n \n\nAt the mid to high rpm range (maximum power produced range), the HKS intercooler offers an excellent cooling performance. Increase vehicle performance while maintaining OEM fitment and advantage in terms of power and torque.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eYaris GR | GXPA16 | 2020-2025 | TC | G16E-GTS | I3\u003c!--split--\u003e"}

{"id":7990496428214,"title":"HKS GTIII-RS Bolt-on Turbo kit with CAT less extension - Toyota - 86 ZN6","handle":"hks-gtiii-rs-bolt-on-turbo-kit-with-cat-less-extension-zn6-11001-kt001","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 11001-KT001\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThis bolt-on turbo kit incorporates HKS's attention to detail, including a specially designed turbo housing.\nIt is a new option for tuning the 86 turbocharger.\u003cbr\u003e\u003cbr\u003eKit contents\u003cbr\u003e\nDedicated GTIII-RS turbocharger assembly (including actuator)\u003cbr\u003e\nFront mounted intercooler and piping\u003cbr\u003e\nExhaust manifold, extension without catalyst\u003cbr\u003e\nPower flow and suction pipes\u003cbr\u003e\nOil and water piping parts\u003cbr\u003e\nDedicated heat shielding cover, heat shielding sheet\u003cbr\u003e\nGaskets, brackets, bolts, and other short parts\u003cbr\u003e\u003cbr\u003e\n?Notes\u003cbr\u003e\u003cbr\u003e\nIt is necessary to strengthen the fuel system, such as by installing injectors. Also, the control parts are not included in the kit, so please purchase them separately. It is also necessary to adjust the settings to suit the actual vehicle.\u003cbr\u003e\nThe torque characteristics will change significantly and slippage may occur, so please install a reinforced clutch.\u003cbr\u003e\nTo protect the engine, we strongly recommend installing an oil cooler.\u003cbr\u003e\nA separate pressure sensor is required.\u003cbr\u003e\nWhen installing the kit, modifications to the vehicle will be required.\u003cbr\u003e\nOnly the DBA-ZN6 M\/T GT\/GT Limited has obtained a vehicle emission test result certificate.\u003cbr\u003e\u003cbr\u003e\n? Features\u003cbr\u003e\nBased on the GTIII-RS, which is ideal for 2.0L class vehicles, it uses a specially designed compressor housing and turbo housing. When combined with a standard engine, it produces approximately 240kW (326ps).\n*Our internal data. Uses a large-capacity injector.\u003cbr\u003e\nThe exhaust manifold is a 4-in-1 type. The inside of the flexible pipe that releases vibrations is made of a spiral pipe made of high heat resistant material that does not cause exhaust resistance. The outer mesh is made of titanium material that is resistant to salt damage, improving durability. In addition, the engine side flange is welded from the inside to reduce exhaust resistance in various places.\u003cbr\u003e\nThe turbo side flange of the extension pipe has a stepped part where the pipe is inserted to eliminate the step on the pipe end. This, combined with the shape of the bypass pipe, reduces exhaust resistance. It is also equipped with a metal catalyzer, which is essential to clear safety standards.\u003cbr\u003e\nThe intercooler has a sufficient core size capacity (390 x 270 x 100) to reduce the intake temperature. In addition, an offset type tank shape is used considering the use of an oil cooler kit.\u003cbr\u003e\u003cbr\u003e\n \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e86 | ZN6 SPEC A | 2012-2013 | NA | 4U-GSE | H4,86 | ZN6 SPEC B | 2013-2014 | NA | 4U-GSE | H4,86 | ZN6 SPEC C | 2014-2015 | NA | 4U-GSE | H4,86 | ZN6 SPEC D | 2015-2016 | NA | 4U-GSE | H4,86 | ZN6 SPEC E | 2016-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e","published_at":"2024-06-12T14:13:02+08:00","created_at":"2024-06-12T14:11:06+08:00","vendor":"HKS","type":"Turbocharger Kits","tags":["2012","2013","2014","2015","2016","2017","2018","86-zn6-spec-b-2013-2014-na-4u-gse-h4","86-zn6-spec-c-2014-2015-na-4u-gse-h4","86-zn6-spec-d-2015-2016-na-4u-gse-h4","86-zn6-spec-e-2016-2018-na-4u-gse-h4","forced-induction","hks","JP1","toyota","turbocharger-kits","ws112","ZN6"],"price":494460,"price_min":494460,"price_max":494460,"available":true,"price_varies":false,"compare_at_price":531400,"compare_at_price_min":531400,"compare_at_price_max":531400,"compare_at_price_varies":false,"variants":[{"id":43253477966006,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"11001-KT001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS GTIII-RS Bolt-on Turbo kit with CAT less extension - Toyota - 86 ZN6","public_title":null,"options":["Default Title"],"price":494460,"weight":52000,"compare_at_price":531400,"inventory_quantity":49,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/II8fYvSOrphqM16wWzRSjUp1zlAdlulyrQ3KMDup_d7a022fa-fbee-453d-b644-4d37b2e10005.jpg?v=1723092196","\/\/rzcrewgarage.com\/cdn\/shop\/files\/11001-AT005-2_8ed4613c-4403-45d5-b08d-6f3c6453991c.jpg?v=1723092197","\/\/rzcrewgarage.com\/cdn\/shop\/files\/11001-AT005-3_bf71b6db-6f5f-4971-8668-334336bd393a.gif?v=1718172666"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/II8fYvSOrphqM16wWzRSjUp1zlAdlulyrQ3KMDup_d7a022fa-fbee-453d-b644-4d37b2e10005.jpg?v=1723092196","options":["Title"],"media":[{"alt":"HKS GTIII-RS Bolt-on Turbo kit with CAT less extension - Toyota - 86 ZN6","id":28023733551286,"position":1,"preview_image":{"aspect_ratio":1.923,"height":312,"width":600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/II8fYvSOrphqM16wWzRSjUp1zlAdlulyrQ3KMDup_d7a022fa-fbee-453d-b644-4d37b2e10005.jpg?v=1723092196"},"aspect_ratio":1.923,"height":312,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/II8fYvSOrphqM16wWzRSjUp1zlAdlulyrQ3KMDup_d7a022fa-fbee-453d-b644-4d37b2e10005.jpg?v=1723092196","width":600},{"alt":"HKS GTIII-RS Bolt-on Turbo kit with CAT less extension - Toyota - 86 ZN6","id":28023733584054,"position":2,"preview_image":{"aspect_ratio":1.333,"height":240,"width":320,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/11001-AT005-2_8ed4613c-4403-45d5-b08d-6f3c6453991c.jpg?v=1723092197"},"aspect_ratio":1.333,"height":240,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/11001-AT005-2_8ed4613c-4403-45d5-b08d-6f3c6453991c.jpg?v=1723092197","width":320},{"alt":"HKS GTIII-RS Bolt-on Turbo kit with CAT less extension - Toyota - 86 ZN6","id":28023733616822,"position":3,"preview_image":{"aspect_ratio":1.133,"height":565,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/11001-AT005-3_bf71b6db-6f5f-4971-8668-334336bd393a.gif?v=1718172666"},"aspect_ratio":1.133,"height":565,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/11001-AT005-3_bf71b6db-6f5f-4971-8668-334336bd393a.gif?v=1718172666","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 11001-KT001\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThis bolt-on turbo kit incorporates HKS's attention to detail, including a specially designed turbo housing.\nIt is a new option for tuning the 86 turbocharger.\u003cbr\u003e\u003cbr\u003eKit contents\u003cbr\u003e\nDedicated GTIII-RS turbocharger assembly (including actuator)\u003cbr\u003e\nFront mounted intercooler and piping\u003cbr\u003e\nExhaust manifold, extension without catalyst\u003cbr\u003e\nPower flow and suction pipes\u003cbr\u003e\nOil and water piping parts\u003cbr\u003e\nDedicated heat shielding cover, heat shielding sheet\u003cbr\u003e\nGaskets, brackets, bolts, and other short parts\u003cbr\u003e\u003cbr\u003e\n?Notes\u003cbr\u003e\u003cbr\u003e\nIt is necessary to strengthen the fuel system, such as by installing injectors. Also, the control parts are not included in the kit, so please purchase them separately. It is also necessary to adjust the settings to suit the actual vehicle.\u003cbr\u003e\nThe torque characteristics will change significantly and slippage may occur, so please install a reinforced clutch.\u003cbr\u003e\nTo protect the engine, we strongly recommend installing an oil cooler.\u003cbr\u003e\nA separate pressure sensor is required.\u003cbr\u003e\nWhen installing the kit, modifications to the vehicle will be required.\u003cbr\u003e\nOnly the DBA-ZN6 M\/T GT\/GT Limited has obtained a vehicle emission test result certificate.\u003cbr\u003e\u003cbr\u003e\n? Features\u003cbr\u003e\nBased on the GTIII-RS, which is ideal for 2.0L class vehicles, it uses a specially designed compressor housing and turbo housing. When combined with a standard engine, it produces approximately 240kW (326ps).\n*Our internal data. Uses a large-capacity injector.\u003cbr\u003e\nThe exhaust manifold is a 4-in-1 type. The inside of the flexible pipe that releases vibrations is made of a spiral pipe made of high heat resistant material that does not cause exhaust resistance. The outer mesh is made of titanium material that is resistant to salt damage, improving durability. In addition, the engine side flange is welded from the inside to reduce exhaust resistance in various places.\u003cbr\u003e\nThe turbo side flange of the extension pipe has a stepped part where the pipe is inserted to eliminate the step on the pipe end. This, combined with the shape of the bypass pipe, reduces exhaust resistance. It is also equipped with a metal catalyzer, which is essential to clear safety standards.\u003cbr\u003e\nThe intercooler has a sufficient core size capacity (390 x 270 x 100) to reduce the intake temperature. In addition, an offset type tank shape is used considering the use of an oil cooler kit.\u003cbr\u003e\u003cbr\u003e\n \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e86 | ZN6 SPEC A | 2012-2013 | NA | 4U-GSE | H4,86 | ZN6 SPEC B | 2013-2014 | NA | 4U-GSE | H4,86 | ZN6 SPEC C | 2014-2015 | NA | 4U-GSE | H4,86 | ZN6 SPEC D | 2015-2016 | NA | 4U-GSE | H4,86 | ZN6 SPEC E | 2016-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e"}

{"id":7990496362678,"title":"HKS GTIII-RS Bolt-on Turbo kit with Cat extension - Toyota - 86 ZN6","handle":"hks-gtiii-rs-bolt-on-turbo-kit-with-cat-extension-zn6-11001-at005","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 11001-AT005\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThis bolt-on turbo kit incorporates HKS's attention to detail, including a specially designed turbo housing.\nIt is a new option for tuning the 86 turbocharger.\u003cbr\u003e\u003cbr\u003eKit contents\u003cbr\u003e\nDedicated GTIII-RS turbocharger assembly (including actuator)\u003cbr\u003e\nFront mounted intercooler and piping\u003cbr\u003e\nExhaust manifold, extension with catalyst\u003cbr\u003e\nPower flow and suction pipes\u003cbr\u003e\nOil and water piping parts\u003cbr\u003e\nDedicated heat shielding cover, heat shielding sheet\u003cbr\u003e\nGaskets, brackets, bolts, and other short parts\u003cbr\u003e\u003cbr\u003e\n?Notes\u003cbr\u003e\u003cbr\u003e\nIt is necessary to strengthen the fuel system, such as by installing injectors. Also, the control parts are not included in the kit, so please purchase them separately. It is also necessary to adjust the settings to suit the actual vehicle.\u003cbr\u003e\nThe torque characteristics will change significantly and slippage may occur, so please install a reinforced clutch.\u003cbr\u003e\nTo protect the engine, we strongly recommend installing an oil cooler.\u003cbr\u003e\nA separate pressure sensor is required.\u003cbr\u003e\nWhen installing the kit, modifications to the vehicle will be required.\u003cbr\u003e\nOnly the DBA-ZN6 M\/T GT\/GT Limited has obtained a vehicle emission test result certificate.\u003cbr\u003e\u003cbr\u003e\n? Features\u003cbr\u003e\nBased on the GTIII-RS, which is ideal for 2.0L class vehicles, it uses a specially designed compressor housing and turbo housing. When combined with a standard engine, it produces approximately 240kW (326ps).\n*Our internal data. Uses a large-capacity injector.\u003cbr\u003e\nThe exhaust manifold is a 4-in-1 type. The inside of the flexible pipe that releases vibrations is made of a spiral pipe made of high heat resistant material that does not cause exhaust resistance. The outer mesh is made of titanium material that is resistant to salt damage, improving durability. In addition, the engine side flange is welded from the inside to reduce exhaust resistance in various places.\u003cbr\u003e\nThe turbo side flange of the extension pipe has a stepped part where the pipe is inserted to eliminate the step on the pipe end. This, combined with the shape of the bypass pipe, reduces exhaust resistance. It is also equipped with a metal catalyzer, which is essential to clear safety standards.\u003cbr\u003e\nThe intercooler has a sufficient core size capacity (390 x 270 x 100) to reduce the intake temperature. In addition, an offset type tank shape is used considering the use of an oil cooler kit.\u003cbr\u003e\u003cbr\u003e\n \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e86 | ZN6 SPEC A | 2012-2013 | NA | 4U-GSE | H4,86 | ZN6 SPEC B | 2013-2014 | NA | 4U-GSE | H4,86 | ZN6 SPEC C | 2014-2015 | NA | 4U-GSE | H4,86 | ZN6 SPEC D | 2015-2016 | NA | 4U-GSE | H4,86 | ZN6 SPEC E | 2016-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e","published_at":"2024-06-12T14:12:50+08:00","created_at":"2024-06-12T14:11:00+08:00","vendor":"HKS","type":"Turbocharger Kits","tags":["2012","2013","2014","2015","2016","2017","2018","86-zn6-spec-b-2013-2014-na-4u-gse-h4","86-zn6-spec-c-2014-2015-na-4u-gse-h4","86-zn6-spec-d-2015-2016-na-4u-gse-h4","86-zn6-spec-e-2016-2018-na-4u-gse-h4","forced-induction","hks","JP1","toyota","turbocharger-kits","ws112","ZN6"],"price":545960,"price_min":545960,"price_max":545960,"available":true,"price_varies":false,"compare_at_price":586800,"compare_at_price_min":586800,"compare_at_price_max":586800,"compare_at_price_varies":false,"variants":[{"id":43253477900470,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"11001-AT005","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS GTIII-RS Bolt-on Turbo kit with Cat extension - Toyota - 86 ZN6","public_title":null,"options":["Default Title"],"price":545960,"weight":56000,"compare_at_price":586800,"inventory_quantity":49,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/11001-AT005-1_37cc7c19-4b3b-454a-ac28-9fbb5140c52b.jpg?v=1723092199","\/\/rzcrewgarage.com\/cdn\/shop\/files\/Ucar9vH0g0MtthxUuPNGQCE9Lp5lqRo2yEMvtl0c_6442c1ce-120f-4b6e-89cb-26e1a5260137.jpg?v=1723092201","\/\/rzcrewgarage.com\/cdn\/shop\/files\/11001-AT005-2_c06d9a62-0fae-42f2-8e50-9c4f4a0c205d.jpg?v=1723092203","\/\/rzcrewgarage.com\/cdn\/shop\/files\/9DMQ5wIjpXVBujTgIIhdt5rA5xwj6jOyI6Ku2iBU_2b5e73d0-b03c-4745-abcc-e17d2401b98f.gif?v=1718172660"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/11001-AT005-1_37cc7c19-4b3b-454a-ac28-9fbb5140c52b.jpg?v=1723092199","options":["Title"],"media":[{"alt":"HKS GTIII-RS Bolt-on Turbo kit with Cat extension - Toyota - 86 ZN6","id":28023732863158,"position":1,"preview_image":{"aspect_ratio":2.0,"height":300,"width":600,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/11001-AT005-1_37cc7c19-4b3b-454a-ac28-9fbb5140c52b.jpg?v=1723092199"},"aspect_ratio":2.0,"height":300,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/11001-AT005-1_37cc7c19-4b3b-454a-ac28-9fbb5140c52b.jpg?v=1723092199","width":600},{"alt":"HKS GTIII-RS Bolt-on Turbo kit with Cat extension - Toyota - 86 ZN6","id":28023732895926,"position":2,"preview_image":{"aspect_ratio":1.336,"height":211,"width":282,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Ucar9vH0g0MtthxUuPNGQCE9Lp5lqRo2yEMvtl0c_6442c1ce-120f-4b6e-89cb-26e1a5260137.jpg?v=1723092201"},"aspect_ratio":1.336,"height":211,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/Ucar9vH0g0MtthxUuPNGQCE9Lp5lqRo2yEMvtl0c_6442c1ce-120f-4b6e-89cb-26e1a5260137.jpg?v=1723092201","width":282},{"alt":"HKS GTIII-RS Bolt-on Turbo kit with Cat extension - Toyota - 86 ZN6","id":28023732928694,"position":3,"preview_image":{"aspect_ratio":1.333,"height":240,"width":320,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/11001-AT005-2_c06d9a62-0fae-42f2-8e50-9c4f4a0c205d.jpg?v=1723092203"},"aspect_ratio":1.333,"height":240,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/11001-AT005-2_c06d9a62-0fae-42f2-8e50-9c4f4a0c205d.jpg?v=1723092203","width":320},{"alt":"HKS GTIII-RS Bolt-on Turbo kit with Cat extension - Toyota - 86 ZN6","id":28023732961462,"position":4,"preview_image":{"aspect_ratio":1.309,"height":489,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/9DMQ5wIjpXVBujTgIIhdt5rA5xwj6jOyI6Ku2iBU_2b5e73d0-b03c-4745-abcc-e17d2401b98f.gif?v=1718172660"},"aspect_ratio":1.309,"height":489,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/9DMQ5wIjpXVBujTgIIhdt5rA5xwj6jOyI6Ku2iBU_2b5e73d0-b03c-4745-abcc-e17d2401b98f.gif?v=1718172660","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003eReference Number: 11001-AT005\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThis bolt-on turbo kit incorporates HKS's attention to detail, including a specially designed turbo housing.\nIt is a new option for tuning the 86 turbocharger.\u003cbr\u003e\u003cbr\u003eKit contents\u003cbr\u003e\nDedicated GTIII-RS turbocharger assembly (including actuator)\u003cbr\u003e\nFront mounted intercooler and piping\u003cbr\u003e\nExhaust manifold, extension with catalyst\u003cbr\u003e\nPower flow and suction pipes\u003cbr\u003e\nOil and water piping parts\u003cbr\u003e\nDedicated heat shielding cover, heat shielding sheet\u003cbr\u003e\nGaskets, brackets, bolts, and other short parts\u003cbr\u003e\u003cbr\u003e\n?Notes\u003cbr\u003e\u003cbr\u003e\nIt is necessary to strengthen the fuel system, such as by installing injectors. Also, the control parts are not included in the kit, so please purchase them separately. It is also necessary to adjust the settings to suit the actual vehicle.\u003cbr\u003e\nThe torque characteristics will change significantly and slippage may occur, so please install a reinforced clutch.\u003cbr\u003e\nTo protect the engine, we strongly recommend installing an oil cooler.\u003cbr\u003e\nA separate pressure sensor is required.\u003cbr\u003e\nWhen installing the kit, modifications to the vehicle will be required.\u003cbr\u003e\nOnly the DBA-ZN6 M\/T GT\/GT Limited has obtained a vehicle emission test result certificate.\u003cbr\u003e\u003cbr\u003e\n? Features\u003cbr\u003e\nBased on the GTIII-RS, which is ideal for 2.0L class vehicles, it uses a specially designed compressor housing and turbo housing. When combined with a standard engine, it produces approximately 240kW (326ps).\n*Our internal data. Uses a large-capacity injector.\u003cbr\u003e\nThe exhaust manifold is a 4-in-1 type. The inside of the flexible pipe that releases vibrations is made of a spiral pipe made of high heat resistant material that does not cause exhaust resistance. The outer mesh is made of titanium material that is resistant to salt damage, improving durability. In addition, the engine side flange is welded from the inside to reduce exhaust resistance in various places.\u003cbr\u003e\nThe turbo side flange of the extension pipe has a stepped part where the pipe is inserted to eliminate the step on the pipe end. This, combined with the shape of the bypass pipe, reduces exhaust resistance. It is also equipped with a metal catalyzer, which is essential to clear safety standards.\u003cbr\u003e\nThe intercooler has a sufficient core size capacity (390 x 270 x 100) to reduce the intake temperature. In addition, an offset type tank shape is used considering the use of an oil cooler kit.\u003cbr\u003e\u003cbr\u003e\n \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003e86 | ZN6 SPEC A | 2012-2013 | NA | 4U-GSE | H4,86 | ZN6 SPEC B | 2013-2014 | NA | 4U-GSE | H4,86 | ZN6 SPEC C | 2014-2015 | NA | 4U-GSE | H4,86 | ZN6 SPEC D | 2015-2016 | NA | 4U-GSE | H4,86 | ZN6 SPEC E | 2016-2018 | NA | 4U-GSE | H4\u003c!--split--\u003e"}

{"id":7924029554870,"title":"HKS - SQV4 Sequential Blow Off Valve Kit - Toyota - Supra A90 GR DB42","handle":"hks-sqv4-sequential-blow-off-valve-kit-db42-71008-at021","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Hks\u003cbr\u003eReference Number: 71008-AT021\u003cbr\u003e\u003cbr\u003eThe HKS Sequential Blow Off Valve has been one of the favorite modifications among sport compact drivers for more than 20 years. From its unique chirping sound, to the ability to out-perform OEM units makes this a blow off valve one can depend on. The latest HKS Super SQV4 Blow Off Valve employs the same design qualities as the original which involves a pull-type sequential valve structure with a differential pressure control system. This design allows for stable operating ranges from low, to high boost pressures. This kit is specially designed for Toyota Supra A90 GR DB42 and included all piping, Hardware to be installed bolt-on in your car.\u003cbr\u003e\u003cbr\u003eIncluded:\u003cbr\u003e\n-Head unit\u003cbr\u003e\n-Vehicle specific pipe\u003cbr\u003e\n-Hoses, Clams, Fittings for installation\u003cbr\u003e\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSupra A90 GR | DB42 | 2019-2020 | TT | B58B30 | I6\u003c!--split--\u003eSupra A90 GR | DB42 | 2019-2020 | TT | B58B30 | I6","published_at":"2024-04-30T16:08:42+08:00","created_at":"2024-04-30T16:07:46+08:00","vendor":"Hks","type":"Universal Blow Off Valves","tags":["2019","2020","DB42","forced-induction","hks","JP1","supra-a90-gr-db42-2019-2020-tt-b58b30-i6","toyota","universal-blow-off-valves","ws122"],"price":114380,"price_min":114380,"price_max":114380,"available":true,"price_varies":false,"compare_at_price":138900,"compare_at_price_min":138900,"compare_at_price_max":138900,"compare_at_price_varies":false,"variants":[{"id":43087618179254,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"71008-AT021","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - SQV4 Sequential Blow Off Valve Kit - Toyota - Supra A90 GR DB42","public_title":null,"options":["Default Title"],"price":114380,"weight":5000,"compare_at_price":138900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/files\/71008-AT021_06435c7c-3f66-43d7-8a06-00d76917883e.jpg?v=1714464467"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/71008-AT021_06435c7c-3f66-43d7-8a06-00d76917883e.jpg?v=1714464467","options":["Title"],"media":[{"alt":"HKS - SQV4 Sequential Blow Off Valve Kit - Toyota - Supra A90 GR DB42","id":27755583504566,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/71008-AT021_06435c7c-3f66-43d7-8a06-00d76917883e.jpg?v=1714464467"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/files\/71008-AT021_06435c7c-3f66-43d7-8a06-00d76917883e.jpg?v=1714464467","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Hks\u003cbr\u003eReference Number: 71008-AT021\u003cbr\u003e\u003cbr\u003eThe HKS Sequential Blow Off Valve has been one of the favorite modifications among sport compact drivers for more than 20 years. From its unique chirping sound, to the ability to out-perform OEM units makes this a blow off valve one can depend on. The latest HKS Super SQV4 Blow Off Valve employs the same design qualities as the original which involves a pull-type sequential valve structure with a differential pressure control system. This design allows for stable operating ranges from low, to high boost pressures. This kit is specially designed for Toyota Supra A90 GR DB42 and included all piping, Hardware to be installed bolt-on in your car.\u003cbr\u003e\u003cbr\u003eIncluded:\u003cbr\u003e\n-Head unit\u003cbr\u003e\n-Vehicle specific pipe\u003cbr\u003e\n-Hoses, Clams, Fittings for installation\u003cbr\u003e\n\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSupra A90 GR | DB42 | 2019-2020 | TT | B58B30 | I6\u003c!--split--\u003eSupra A90 GR | DB42 | 2019-2020 | TT | B58B30 | I6"}

{"id":7746663514294,"title":"GCG Turbos Billet Flow 400 High Flow - Toyota - Supra A90 SZ DB22","handle":"gcg-turbos-billet-flow-400-high-flow-db22-g851676-5010ssp","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: GCG Turbos\u003cbr\u003eReference Number: G851676-5010SSP\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eActuator turbine that can be completely bolted on to S660.\nWith the normal turbine, the boost increases to about 70 HP, but we achieved 100 HP, an increase of 30 HP.\nIt achieves punchy acceleration at mid-to-high rpm without sacrificing torque in the low rpm range.\nThis is an upgrade of the normal turbine manufactured by Mitsubishi Heavy Industries (MHI), and as it is produced by the same manufacturer, it achieves both high performance and reliable installation.\n\n*Separate fuel system reinforcement and ECU settings are required.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSupra A90 SZ | DB22 | 2019-2020 | T | B48B20 | I4\u003c!--split--\u003e","published_at":"2024-01-09T15:25:07+08:00","created_at":"2024-01-09T15:12:02+08:00","vendor":"GCG Turbos","type":"Turbocharger Kits","tags":["2019","2020","DB22","forced-induction","gcg-turbos","jp1","supra-a90-sz-db22-2019-2020-t-b48b20-i4","toyota","turbocharger-kits","ws17"],"price":310890,"price_min":310890,"price_max":310890,"available":true,"price_varies":false,"compare_at_price":310900,"compare_at_price_min":310900,"compare_at_price_max":310900,"compare_at_price_varies":false,"variants":[{"id":42590701355190,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"G851676-5010SSP","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"GCG Turbos Billet Flow 400 High Flow - Toyota - Supra A90 SZ DB22","public_title":null,"options":["Default Title"],"price":310890,"weight":16000,"compare_at_price":310900,"inventory_quantity":43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/gcg-turbos-billet-flow-400-high-flow-toyota-supra-a90-sz-db22-rzcrew-1.jpg?v=1710314259","\/\/rzcrewgarage.com\/cdn\/shop\/products\/gcg-turbos-billet-flow-400-high-flow-toyota-supra-a90-sz-db22-rzcrew-2.jpg?v=1710314260"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/gcg-turbos-billet-flow-400-high-flow-toyota-supra-a90-sz-db22-rzcrew-1.jpg?v=1710314259","options":["Title"],"media":[{"alt":"GCG Turbos Billet Flow 400 High Flow - Toyota - Supra A90 SZ DB22","id":27027662897334,"position":1,"preview_image":{"aspect_ratio":1.5,"height":640,"width":960,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/gcg-turbos-billet-flow-400-high-flow-toyota-supra-a90-sz-db22-rzcrew-1.jpg?v=1710314259"},"aspect_ratio":1.5,"height":640,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/gcg-turbos-billet-flow-400-high-flow-toyota-supra-a90-sz-db22-rzcrew-1.jpg?v=1710314259","width":960},{"alt":"GCG Turbos Billet Flow 400 High Flow - Toyota - Supra A90 SZ DB22","id":27027662930102,"position":2,"preview_image":{"aspect_ratio":1.5,"height":640,"width":960,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/gcg-turbos-billet-flow-400-high-flow-toyota-supra-a90-sz-db22-rzcrew-2.jpg?v=1710314260"},"aspect_ratio":1.5,"height":640,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/gcg-turbos-billet-flow-400-high-flow-toyota-supra-a90-sz-db22-rzcrew-2.jpg?v=1710314260","width":960}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: GCG Turbos\u003cbr\u003eReference Number: G851676-5010SSP\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eActuator turbine that can be completely bolted on to S660.\nWith the normal turbine, the boost increases to about 70 HP, but we achieved 100 HP, an increase of 30 HP.\nIt achieves punchy acceleration at mid-to-high rpm without sacrificing torque in the low rpm range.\nThis is an upgrade of the normal turbine manufactured by Mitsubishi Heavy Industries (MHI), and as it is produced by the same manufacturer, it achieves both high performance and reliable installation.\n\n*Separate fuel system reinforcement and ECU settings are required.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eSupra A90 SZ | DB22 | 2019-2020 | T | B48B20 | I4\u003c!--split--\u003e"}

{"id":7272799305910,"title":"Vibrant HD Clamp Full Assembly for 2.5in OD Tubing - Polished Clamp","handle":"vibrant-hd-clamp-full-assembly-for-2-5in-od-tubing-polished-clamp-12515p","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Vibrant\u003cbr\u003eReference Number: 12515P\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eVibrant Performance Clamping Systems are constructed entirely from 6061 aluminum and provide leak-free \"modular\" connections that are capable of withstanding up to 800psi of boost pressure and temperatures up to 400 deg F. The NEW HD Clamping System's robust billet aluminum design is ideal for race applications with highly advanced pressurized air applications and turbo intake charge piping. The existing VanJen Clamp is ideal for street applications where silicone couplers may not offer the best solution. Both clamps perform great and provide a professional show-like finish to your engine bay. They are available in diameters that support O.D. tubing ranging from 2\" to 4\". \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eUniversal\u003c!--split--\u003e","published_at":"2025-08-22T15:34:05+08:00","created_at":"2022-03-03T15:44:45+08:00","vendor":"Vibrant","type":"Intercooler Kits","tags":["0","1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","alfa-romeo","aston-martin","audi","bmw","chevrolet","citroen","daihatsu","ferrari","fiat","forced-induction","ford","honda","hyundai","intercooler-kits","kia","lexus","lotus","mazda","mercedes-benz","mini","mitsubishi","new","nissan","opel","peugeot","porsche","renault","seat","skoda","subaru","suzuki","toyota","US1","vibrant","volkswagen","volvo","ws127"],"price":16450,"price_min":16450,"price_max":16450,"available":false,"price_varies":false,"compare_at_price":20600,"compare_at_price_min":20600,"compare_at_price_max":20600,"compare_at_price_varies":false,"variants":[{"id":41264150249654,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"12515P","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Vibrant HD Clamp Full Assembly for 2.5in OD Tubing - Polished Clamp","public_title":null,"options":["Default Title"],"price":16450,"weight":10000,"compare_at_price":20600,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamp-full-assembly-for-2-5in-od-tubing-polished-clamp-rzcrew.jpg?v=1710320978"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamp-full-assembly-for-2-5in-od-tubing-polished-clamp-rzcrew.jpg?v=1710320978","options":["Title"],"media":[{"alt":"Vibrant HD Clamp Full Assembly for 2.5in OD Tubing - Polished Clamp","id":24718882865334,"position":1,"preview_image":{"aspect_ratio":1.751,"height":457,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamp-full-assembly-for-2-5in-od-tubing-polished-clamp-rzcrew.jpg?v=1710320978"},"aspect_ratio":1.751,"height":457,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamp-full-assembly-for-2-5in-od-tubing-polished-clamp-rzcrew.jpg?v=1710320978","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Vibrant\u003cbr\u003eReference Number: 12515P\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eVibrant Performance Clamping Systems are constructed entirely from 6061 aluminum and provide leak-free \"modular\" connections that are capable of withstanding up to 800psi of boost pressure and temperatures up to 400 deg F. The NEW HD Clamping System's robust billet aluminum design is ideal for race applications with highly advanced pressurized air applications and turbo intake charge piping. The existing VanJen Clamp is ideal for street applications where silicone couplers may not offer the best solution. Both clamps perform great and provide a professional show-like finish to your engine bay. They are available in diameters that support O.D. tubing ranging from 2\" to 4\". \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eUniversal\u003c!--split--\u003e"}

{"id":7272799174838,"title":"Vibrant HD Clamping System Assembly for 3in. OD Tubing - Blue Clamp","handle":"vibrant-hd-clamping-system-assembly-for-3in-od-tubing-blue-clamp-12516b","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Vibrant\u003cbr\u003eReference Number: 12516B\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eVibrant Performance Clamping Systems are constructed entirely from 6061 aluminum and provide leak-free \"modular\" connections that are capable of withstanding up to 800psi of boost pressure and temperatures up to 400 deg F. The NEW HD Clamping System's robust billet aluminum design is ideal for race applications with highly advanced pressurized air applications and turbo intake charge piping. The existing VanJen Clamp is ideal for street applications where silicone couplers may not offer the best solution. Both clamps perform great and provide a professional show-like finish to your engine bay. They are available in diameters that support O.D. tubing ranging from 2\" to 4\". \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eUniversal\u003c!--split--\u003e","published_at":"2025-08-22T15:34:02+08:00","created_at":"2022-03-03T15:44:39+08:00","vendor":"Vibrant","type":"Intercooler Kits","tags":["0","1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","alfa-romeo","aston-martin","audi","bmw","chevrolet","citroen","daihatsu","ferrari","fiat","forced-induction","ford","honda","hyundai","intercooler-kits","kia","lexus","lotus","mazda","mercedes-benz","mini","mitsubishi","new","nissan","opel","peugeot","porsche","renault","seat","skoda","subaru","suzuki","toyota","US1","vibrant","volkswagen","volvo","ws127"],"price":16450,"price_min":16450,"price_max":16450,"available":false,"price_varies":false,"compare_at_price":20600,"compare_at_price_min":20600,"compare_at_price_max":20600,"compare_at_price_varies":false,"variants":[{"id":41264150118582,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"12516B","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Vibrant HD Clamping System Assembly for 3in. OD Tubing - Blue Clamp","public_title":null,"options":["Default Title"],"price":16450,"weight":10000,"compare_at_price":20600,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamping-system-assembly-for-3in-od-tubing-blue-clamp-rzcrew.jpg?v=1710320980"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamping-system-assembly-for-3in-od-tubing-blue-clamp-rzcrew.jpg?v=1710320980","options":["Title"],"media":[{"alt":"Vibrant HD Clamping System Assembly for 3in. OD Tubing - Blue Clamp","id":24718882537654,"position":1,"preview_image":{"aspect_ratio":1.75,"height":240,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamping-system-assembly-for-3in-od-tubing-blue-clamp-rzcrew.jpg?v=1710320980"},"aspect_ratio":1.75,"height":240,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamping-system-assembly-for-3in-od-tubing-blue-clamp-rzcrew.jpg?v=1710320980","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Vibrant\u003cbr\u003eReference Number: 12516B\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eVibrant Performance Clamping Systems are constructed entirely from 6061 aluminum and provide leak-free \"modular\" connections that are capable of withstanding up to 800psi of boost pressure and temperatures up to 400 deg F. The NEW HD Clamping System's robust billet aluminum design is ideal for race applications with highly advanced pressurized air applications and turbo intake charge piping. The existing VanJen Clamp is ideal for street applications where silicone couplers may not offer the best solution. Both clamps perform great and provide a professional show-like finish to your engine bay. They are available in diameters that support O.D. tubing ranging from 2\" to 4\". \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eUniversal\u003c!--split--\u003e"}

{"id":7272799371446,"title":"Vibrant HD Clamp Full Assembly for 3.5in OD Tubing - Polished Clamp","handle":"vibrant-hd-clamp-full-assembly-for-3-5in-od-tubing-polished-clamp-12517p","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Vibrant\u003cbr\u003eReference Number: 12517P\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eVibrant Performance Clamping Systems are constructed entirely from 6061 aluminum and provide leak-free \"modular\" connections that are capable of withstanding up to 800psi of boost pressure and temperatures up to 400 deg F. The NEW HD Clamping System's robust billet aluminum design is ideal for race applications with highly advanced pressurized air applications and turbo intake charge piping. The existing VanJen Clamp is ideal for street applications where silicone couplers may not offer the best solution. Both clamps perform great and provide a professional show-like finish to your engine bay. They are available in diameters that support O.D. tubing ranging from 2\" to 4\". \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eUniversal\u003c!--split--\u003e","published_at":"2025-08-22T15:34:07+08:00","created_at":"2022-03-03T15:44:48+08:00","vendor":"Vibrant","type":"Intercooler Kits","tags":["0","1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","alfa-romeo","aston-martin","audi","bmw","chevrolet","citroen","daihatsu","ferrari","fiat","forced-induction","ford","honda","hyundai","intercooler-kits","kia","lexus","lotus","mazda","mercedes-benz","mini","mitsubishi","new","nissan","opel","peugeot","porsche","renault","seat","skoda","subaru","suzuki","toyota","US1","vibrant","volkswagen","volvo","ws127"],"price":16450,"price_min":16450,"price_max":16450,"available":false,"price_varies":false,"compare_at_price":20600,"compare_at_price_min":20600,"compare_at_price_max":20600,"compare_at_price_varies":false,"variants":[{"id":41264150380726,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"12517P","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Vibrant HD Clamp Full Assembly for 3.5in OD Tubing - Polished Clamp","public_title":null,"options":["Default Title"],"price":16450,"weight":10000,"compare_at_price":20600,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamp-full-assembly-for-3-5in-od-tubing-polished-clamp-rzcrew.jpg?v=1710320978"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamp-full-assembly-for-3-5in-od-tubing-polished-clamp-rzcrew.jpg?v=1710320978","options":["Title"],"media":[{"alt":"Vibrant HD Clamp Full Assembly for 3.5in OD Tubing - Polished Clamp","id":24718883160246,"position":1,"preview_image":{"aspect_ratio":1.751,"height":457,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamp-full-assembly-for-3-5in-od-tubing-polished-clamp-rzcrew.jpg?v=1710320978"},"aspect_ratio":1.751,"height":457,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamp-full-assembly-for-3-5in-od-tubing-polished-clamp-rzcrew.jpg?v=1710320978","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Vibrant\u003cbr\u003eReference Number: 12517P\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eVibrant Performance Clamping Systems are constructed entirely from 6061 aluminum and provide leak-free \"modular\" connections that are capable of withstanding up to 800psi of boost pressure and temperatures up to 400 deg F. The NEW HD Clamping System's robust billet aluminum design is ideal for race applications with highly advanced pressurized air applications and turbo intake charge piping. The existing VanJen Clamp is ideal for street applications where silicone couplers may not offer the best solution. Both clamps perform great and provide a professional show-like finish to your engine bay. They are available in diameters that support O.D. tubing ranging from 2\" to 4\". \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eUniversal\u003c!--split--\u003e"}

{"id":7272799436982,"title":"Vibrant HD Clamp Full Assembly for 4in OD Tubing - Polished Clamp","handle":"vibrant-hd-clamp-full-assembly-for-4in-od-tubing-polished-clamp-12518p","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Vibrant\u003cbr\u003eReference Number: 12518P\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eVibrant Performance Clamping Systems are constructed entirely from 6061 aluminum and provide leak-free \"modular\" connections that are capable of withstanding up to 800psi of boost pressure and temperatures up to 400 deg F. The NEW HD Clamping System's robust billet aluminum design is ideal for race applications with highly advanced pressurized air applications and turbo intake charge piping. The existing VanJen Clamp is ideal for street applications where silicone couplers may not offer the best solution. Both clamps perform great and provide a professional show-like finish to your engine bay. They are available in diameters that support O.D. tubing ranging from 2\" to 4\". \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eUniversal\u003c!--split--\u003e","published_at":"2025-08-22T15:34:08+08:00","created_at":"2022-03-03T15:44:49+08:00","vendor":"Vibrant","type":"Intercooler Kits","tags":["0","1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","alfa-romeo","aston-martin","audi","bmw","chevrolet","citroen","daihatsu","ferrari","fiat","forced-induction","ford","honda","hyundai","intercooler-kits","kia","lexus","lotus","mazda","mercedes-benz","mini","mitsubishi","new","nissan","opel","peugeot","porsche","renault","seat","skoda","subaru","suzuki","toyota","US1","vibrant","volkswagen","volvo","ws127"],"price":16450,"price_min":16450,"price_max":16450,"available":false,"price_varies":false,"compare_at_price":20600,"compare_at_price_min":20600,"compare_at_price_max":20600,"compare_at_price_varies":false,"variants":[{"id":41264150446262,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"12518P","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Vibrant HD Clamp Full Assembly for 4in OD Tubing - Polished Clamp","public_title":null,"options":["Default Title"],"price":16450,"weight":10000,"compare_at_price":20600,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamp-full-assembly-for-4in-od-tubing-polished-clamp-rzcrew.jpg?v=1710320975"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamp-full-assembly-for-4in-od-tubing-polished-clamp-rzcrew.jpg?v=1710320975","options":["Title"],"media":[{"alt":"Vibrant HD Clamp Full Assembly for 4in OD Tubing - Polished Clamp","id":24718883324086,"position":1,"preview_image":{"aspect_ratio":1.751,"height":457,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamp-full-assembly-for-4in-od-tubing-polished-clamp-rzcrew.jpg?v=1710320975"},"aspect_ratio":1.751,"height":457,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamp-full-assembly-for-4in-od-tubing-polished-clamp-rzcrew.jpg?v=1710320975","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Vibrant\u003cbr\u003eReference Number: 12518P\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eVibrant Performance Clamping Systems are constructed entirely from 6061 aluminum and provide leak-free \"modular\" connections that are capable of withstanding up to 800psi of boost pressure and temperatures up to 400 deg F. The NEW HD Clamping System's robust billet aluminum design is ideal for race applications with highly advanced pressurized air applications and turbo intake charge piping. The existing VanJen Clamp is ideal for street applications where silicone couplers may not offer the best solution. Both clamps perform great and provide a professional show-like finish to your engine bay. They are available in diameters that support O.D. tubing ranging from 2\" to 4\". \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eUniversal\u003c!--split--\u003e"}

{"id":7272799338678,"title":"Vibrant HD Clamp Full Assembly for 3in OD Tubing - Polished Clamp","handle":"vibrant-hd-clamp-full-assembly-for-3in-od-tubing-polished-clamp-12516p","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Vibrant\u003cbr\u003eReference Number: 12516P\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eVibrant Performance Clamping Systems are constructed entirely from 6061 aluminum and provide leak-free \"modular\" connections that are capable of withstanding up to 800psi of boost pressure and temperatures up to 400 deg F. The NEW HD Clamping System's robust billet aluminum design is ideal for race applications with highly advanced pressurized air applications and turbo intake charge piping. The existing VanJen Clamp is ideal for street applications where silicone couplers may not offer the best solution. Both clamps perform great and provide a professional show-like finish to your engine bay. They are available in diameters that support O.D. tubing ranging from 2\" to 4\". \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eUniversal\u003c!--split--\u003e","published_at":"2025-08-22T15:34:06+08:00","created_at":"2022-03-03T15:44:46+08:00","vendor":"Vibrant","type":"Intercooler Kits","tags":["0","1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","alfa-romeo","aston-martin","audi","bmw","chevrolet","citroen","daihatsu","ferrari","fiat","forced-induction","ford","honda","hyundai","intercooler-kits","kia","lexus","lotus","mazda","mercedes-benz","mini","mitsubishi","new","nissan","opel","peugeot","porsche","renault","seat","skoda","subaru","suzuki","toyota","US1","vibrant","volkswagen","volvo","ws127"],"price":16450,"price_min":16450,"price_max":16450,"available":false,"price_varies":false,"compare_at_price":20600,"compare_at_price_min":20600,"compare_at_price_max":20600,"compare_at_price_varies":false,"variants":[{"id":41264150347958,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"12516P","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Vibrant HD Clamp Full Assembly for 3in OD Tubing - Polished Clamp","public_title":null,"options":["Default Title"],"price":16450,"weight":10000,"compare_at_price":20600,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamp-full-assembly-for-3in-od-tubing-polished-clamp-rzcrew.jpg?v=1710320978"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamp-full-assembly-for-3in-od-tubing-polished-clamp-rzcrew.jpg?v=1710320978","options":["Title"],"media":[{"alt":"Vibrant HD Clamp Full Assembly for 3in OD Tubing - Polished Clamp","id":24718883127478,"position":1,"preview_image":{"aspect_ratio":1.751,"height":457,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamp-full-assembly-for-3in-od-tubing-polished-clamp-rzcrew.jpg?v=1710320978"},"aspect_ratio":1.751,"height":457,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamp-full-assembly-for-3in-od-tubing-polished-clamp-rzcrew.jpg?v=1710320978","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Vibrant\u003cbr\u003eReference Number: 12516P\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eVibrant Performance Clamping Systems are constructed entirely from 6061 aluminum and provide leak-free \"modular\" connections that are capable of withstanding up to 800psi of boost pressure and temperatures up to 400 deg F. The NEW HD Clamping System's robust billet aluminum design is ideal for race applications with highly advanced pressurized air applications and turbo intake charge piping. The existing VanJen Clamp is ideal for street applications where silicone couplers may not offer the best solution. Both clamps perform great and provide a professional show-like finish to your engine bay. They are available in diameters that support O.D. tubing ranging from 2\" to 4\". \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eUniversal\u003c!--split--\u003e"}

{"id":7272799273142,"title":"Vibrant HD Clamp Full Assembly for 2in OD Tubing - Polished Clamp","handle":"vibrant-hd-clamp-full-assembly-for-2in-od-tubing-polished-clamp-12513p","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Vibrant\u003cbr\u003eReference Number: 12513P\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eVibrant Performance Clamping Systems are constructed entirely from 6061 aluminum and provide leak-free \"modular\" connections that are capable of withstanding up to 800psi of boost pressure and temperatures up to 400 deg F. The NEW HD Clamping System's robust billet aluminum design is ideal for race applications with highly advanced pressurized air applications and turbo intake charge piping. The existing VanJen Clamp is ideal for street applications where silicone couplers may not offer the best solution. Both clamps perform great and provide a professional show-like finish to your engine bay. They are available in diameters that support O.D. tubing ranging from 2\" to 4\". \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 4 left in stock!\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eUniversal\u003c!--split--\u003e","published_at":"2025-08-22T15:34:04+08:00","created_at":"2022-03-03T15:44:44+08:00","vendor":"Vibrant","type":"Intercooler Kits","tags":["0","1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","alfa-romeo","aston-martin","audi","bmw","chevrolet","citroen","daihatsu","ferrari","fiat","forced-induction","ford","honda","hyundai","intercooler-kits","kia","lexus","lotus","mazda","mercedes-benz","mini","mitsubishi","new","nissan","opel","peugeot","porsche","renault","seat","skoda","subaru","suzuki","toyota","US1","vibrant","volkswagen","volvo","ws127"],"price":16450,"price_min":16450,"price_max":16450,"available":false,"price_varies":false,"compare_at_price":20600,"compare_at_price_min":20600,"compare_at_price_max":20600,"compare_at_price_varies":false,"variants":[{"id":41264150216886,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"12513P","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Vibrant HD Clamp Full Assembly for 2in OD Tubing - Polished Clamp","public_title":null,"options":["Default Title"],"price":16450,"weight":10000,"compare_at_price":20600,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamp-full-assembly-for-2in-od-tubing-polished-clamp-rzcrew.jpg?v=1710320978"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamp-full-assembly-for-2in-od-tubing-polished-clamp-rzcrew.jpg?v=1710320978","options":["Title"],"media":[{"alt":"Vibrant HD Clamp Full Assembly for 2in OD Tubing - Polished Clamp","id":24718882832566,"position":1,"preview_image":{"aspect_ratio":1.751,"height":457,"width":800,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamp-full-assembly-for-2in-od-tubing-polished-clamp-rzcrew.jpg?v=1710320978"},"aspect_ratio":1.751,"height":457,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamp-full-assembly-for-2in-od-tubing-polished-clamp-rzcrew.jpg?v=1710320978","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Vibrant\u003cbr\u003eReference Number: 12513P\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eVibrant Performance Clamping Systems are constructed entirely from 6061 aluminum and provide leak-free \"modular\" connections that are capable of withstanding up to 800psi of boost pressure and temperatures up to 400 deg F. The NEW HD Clamping System's robust billet aluminum design is ideal for race applications with highly advanced pressurized air applications and turbo intake charge piping. The existing VanJen Clamp is ideal for street applications where silicone couplers may not offer the best solution. Both clamps perform great and provide a professional show-like finish to your engine bay. They are available in diameters that support O.D. tubing ranging from 2\" to 4\". \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 4 left in stock!\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eUniversal\u003c!--split--\u003e"}

{"id":7272799240374,"title":"Vibrant HD Clamping System Assembly for 4in. OD Tubing - Blue Clamp","handle":"vibrant-hd-clamping-system-assembly-for-4in-od-tubing-blue-clamp-12518b","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Vibrant\u003cbr\u003eReference Number: 12518B\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eVibrant Performance Clamping Systems are constructed entirely from 6061 aluminum and provide leak-free \"modular\" connections that are capable of withstanding up to 800psi of boost pressure and temperatures up to 400 deg F. The NEW HD Clamping System's robust billet aluminum design is ideal for race applications with highly advanced pressurized air applications and turbo intake charge piping. The existing VanJen Clamp is ideal for street applications where silicone couplers may not offer the best solution. Both clamps perform great and provide a professional show-like finish to your engine bay. They are available in diameters that support O.D. tubing ranging from 2\" to 4\". \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eUniversal\u003c!--split--\u003e","published_at":"2025-08-22T15:34:03+08:00","created_at":"2022-03-03T15:44:42+08:00","vendor":"Vibrant","type":"Intercooler Kits","tags":["0","1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","alfa-romeo","aston-martin","audi","bmw","chevrolet","citroen","daihatsu","ferrari","fiat","forced-induction","ford","honda","hyundai","intercooler-kits","kia","lexus","lotus","mazda","mercedes-benz","mini","mitsubishi","new","nissan","opel","peugeot","porsche","renault","seat","skoda","subaru","suzuki","toyota","US1","vibrant","volkswagen","volvo","ws127"],"price":16450,"price_min":16450,"price_max":16450,"available":false,"price_varies":false,"compare_at_price":20600,"compare_at_price_min":20600,"compare_at_price_max":20600,"compare_at_price_varies":false,"variants":[{"id":41264150184118,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"12518B","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Vibrant HD Clamping System Assembly for 4in. OD Tubing - Blue Clamp","public_title":null,"options":["Default Title"],"price":16450,"weight":10000,"compare_at_price":20600,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamping-system-assembly-for-4in-od-tubing-blue-clamp-rzcrew.jpg?v=1710320978"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamping-system-assembly-for-4in-od-tubing-blue-clamp-rzcrew.jpg?v=1710320978","options":["Title"],"media":[{"alt":"Vibrant HD Clamping System Assembly for 4in. OD Tubing - Blue Clamp","id":24718882668726,"position":1,"preview_image":{"aspect_ratio":1.75,"height":240,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamping-system-assembly-for-4in-od-tubing-blue-clamp-rzcrew.jpg?v=1710320978"},"aspect_ratio":1.75,"height":240,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamping-system-assembly-for-4in-od-tubing-blue-clamp-rzcrew.jpg?v=1710320978","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Vibrant\u003cbr\u003eReference Number: 12518B\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eVibrant Performance Clamping Systems are constructed entirely from 6061 aluminum and provide leak-free \"modular\" connections that are capable of withstanding up to 800psi of boost pressure and temperatures up to 400 deg F. The NEW HD Clamping System's robust billet aluminum design is ideal for race applications with highly advanced pressurized air applications and turbo intake charge piping. The existing VanJen Clamp is ideal for street applications where silicone couplers may not offer the best solution. Both clamps perform great and provide a professional show-like finish to your engine bay. They are available in diameters that support O.D. tubing ranging from 2\" to 4\". \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eUniversal\u003c!--split--\u003e"}

{"id":7272799109302,"title":"Vibrant HD Clamping System Assembly for 2in OD Tubing - Blue Clamp","handle":"vibrant-hd-clamping-system-assembly-for-2in-od-tubing-blue-clamp-12513b","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Vibrant\u003cbr\u003eReference Number: 12513B\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eVibrant Performance Clamping Systems are constructed entirely from 6061 aluminum and provide leak-free \"modular\" connections that are capable of withstanding up to 800psi of boost pressure and temperatures up to 400 deg F. The NEW HD Clamping System's robust billet aluminum design is ideal for race applications with highly advanced pressurized air applications and turbo intake charge piping. The existing VanJen Clamp is ideal for street applications where silicone couplers may not offer the best solution. Both clamps perform great and provide a professional show-like finish to your engine bay. They are available in diameters that support O.D. tubing ranging from 2\" to 4\". \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eUniversal\u003c!--split--\u003e","published_at":"2025-04-14T11:26:31+08:00","created_at":"2022-03-03T15:44:36+08:00","vendor":"Vibrant","type":"Intercooler Kits","tags":["0","1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","alfa-romeo","aston-martin","audi","bmw","chevrolet","citroen","daihatsu","ferrari","fiat","forced-induction","ford","honda","hyundai","intercooler-kits","kia","lexus","lotus","mazda","mercedes-benz","mini","mitsubishi","new","nissan","opel","peugeot","porsche","renault","seat","skoda","subaru","suzuki","toyota","US1","vibrant","volkswagen","volvo","ws127"],"price":16450,"price_min":16450,"price_max":16450,"available":true,"price_varies":false,"compare_at_price":20600,"compare_at_price_min":20600,"compare_at_price_max":20600,"compare_at_price_varies":false,"variants":[{"id":41264150053046,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"12513B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Vibrant HD Clamping System Assembly for 2in OD Tubing - Blue Clamp","public_title":null,"options":["Default Title"],"price":16450,"weight":4272,"compare_at_price":20600,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamping-system-assembly-for-2in-od-tubing-blue-clamp-rzcrew.jpg?v=1710320979"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamping-system-assembly-for-2in-od-tubing-blue-clamp-rzcrew.jpg?v=1710320979","options":["Title"],"media":[{"alt":"Vibrant HD Clamping System Assembly for 2in OD Tubing - Blue Clamp","id":24718882308278,"position":1,"preview_image":{"aspect_ratio":1.75,"height":240,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamping-system-assembly-for-2in-od-tubing-blue-clamp-rzcrew.jpg?v=1710320979"},"aspect_ratio":1.75,"height":240,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamping-system-assembly-for-2in-od-tubing-blue-clamp-rzcrew.jpg?v=1710320979","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Vibrant\u003cbr\u003eReference Number: 12513B\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eVibrant Performance Clamping Systems are constructed entirely from 6061 aluminum and provide leak-free \"modular\" connections that are capable of withstanding up to 800psi of boost pressure and temperatures up to 400 deg F. The NEW HD Clamping System's robust billet aluminum design is ideal for race applications with highly advanced pressurized air applications and turbo intake charge piping. The existing VanJen Clamp is ideal for street applications where silicone couplers may not offer the best solution. Both clamps perform great and provide a professional show-like finish to your engine bay. They are available in diameters that support O.D. tubing ranging from 2\" to 4\". \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eUniversal\u003c!--split--\u003e"}

{"id":7272799207606,"title":"Vibrant HD Clamp System Assembly for 3.5in. OD Tubing - Blue Clamp","handle":"vibrant-hd-clamp-system-assembly-for-3-5in-od-tubing-blue-clamp-12517b","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Vibrant\u003cbr\u003eReference Number: 12517B\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eVibrant Performance Clamping Systems are constructed entirely from 6061 aluminum and provide leak-free \"modular\" connections that are capable of withstanding up to 800psi of boost pressure and temperatures up to 400 deg F. The NEW HD Clamping System's robust billet aluminum design is ideal for race applications with highly advanced pressurized air applications and turbo intake charge piping. The existing VanJen Clamp is ideal for street applications where silicone couplers may not offer the best solution. Both clamps perform great and provide a professional show-like finish to your engine bay. They are available in diameters that support O.D. tubing ranging from 2\" to 4\". \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eUniversal\u003c!--split--\u003e","published_at":"2025-04-14T11:26:32+08:00","created_at":"2022-03-03T15:44:40+08:00","vendor":"Vibrant","type":"Intercooler Kits","tags":["0","1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","alfa-romeo","aston-martin","audi","bmw","chevrolet","citroen","daihatsu","ferrari","fiat","forced-induction","ford","honda","hyundai","intercooler-kits","kia","lexus","lotus","mazda","mercedes-benz","mini","mitsubishi","new","nissan","opel","peugeot","porsche","renault","seat","skoda","subaru","suzuki","toyota","US1","vibrant","volkswagen","volvo","ws127"],"price":16450,"price_min":16450,"price_max":16450,"available":false,"price_varies":false,"compare_at_price":20600,"compare_at_price_min":20600,"compare_at_price_max":20600,"compare_at_price_varies":false,"variants":[{"id":41264150151350,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"12517B","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Vibrant HD Clamp System Assembly for 3.5in. OD Tubing - Blue Clamp","public_title":null,"options":["Default Title"],"price":16450,"weight":10000,"compare_at_price":20600,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamp-system-assembly-for-3-5in-od-tubing-blue-clamp-rzcrew.jpg?v=1710320979"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamp-system-assembly-for-3-5in-od-tubing-blue-clamp-rzcrew.jpg?v=1710320979","options":["Title"],"media":[{"alt":"Vibrant HD Clamp System Assembly for 3.5in. OD Tubing - Blue Clamp","id":24718882635958,"position":1,"preview_image":{"aspect_ratio":1.75,"height":240,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamp-system-assembly-for-3-5in-od-tubing-blue-clamp-rzcrew.jpg?v=1710320979"},"aspect_ratio":1.75,"height":240,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamp-system-assembly-for-3-5in-od-tubing-blue-clamp-rzcrew.jpg?v=1710320979","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Vibrant\u003cbr\u003eReference Number: 12517B\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eVibrant Performance Clamping Systems are constructed entirely from 6061 aluminum and provide leak-free \"modular\" connections that are capable of withstanding up to 800psi of boost pressure and temperatures up to 400 deg F. The NEW HD Clamping System's robust billet aluminum design is ideal for race applications with highly advanced pressurized air applications and turbo intake charge piping. The existing VanJen Clamp is ideal for street applications where silicone couplers may not offer the best solution. Both clamps perform great and provide a professional show-like finish to your engine bay. They are available in diameters that support O.D. tubing ranging from 2\" to 4\". \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eUniversal\u003c!--split--\u003e"}

{"id":7272799142070,"title":"Vibrant HD Clamping System Assembly For 2.5in OD Tubing - Blue Clamp","handle":"vibrant-hd-clamping-system-assembly-for-2-5in-od-tubing-blue-clamp-12515b","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Vibrant\u003cbr\u003eReference Number: 12515B\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eVibrant Performance Clamping Systems are constructed entirely from 6061 aluminum and provide leak-free \"modular\" connections that are capable of withstanding up to 800psi of boost pressure and temperatures up to 400 deg F. The NEW HD Clamping System's robust billet aluminum design is ideal for race applications with highly advanced pressurized air applications and turbo intake charge piping. The existing VanJen Clamp is ideal for street applications where silicone couplers may not offer the best solution. Both clamps perform great and provide a professional show-like finish to your engine bay. They are available in diameters that support O.D. tubing ranging from 2\" to 4\". \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eUniversal\u003c!--split--\u003e","published_at":"2025-08-22T15:34:01+08:00","created_at":"2022-03-03T15:44:38+08:00","vendor":"Vibrant","type":"Intercooler Kits","tags":["0","1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","alfa-romeo","aston-martin","audi","bmw","chevrolet","citroen","daihatsu","ferrari","fiat","forced-induction","ford","honda","hyundai","intercooler-kits","kia","lexus","lotus","mazda","mercedes-benz","mini","mitsubishi","new","nissan","opel","peugeot","porsche","renault","seat","skoda","subaru","suzuki","toyota","US1","vibrant","volkswagen","volvo","ws127"],"price":16450,"price_min":16450,"price_max":16450,"available":false,"price_varies":false,"compare_at_price":20600,"compare_at_price_min":20600,"compare_at_price_max":20600,"compare_at_price_varies":false,"variants":[{"id":41264150085814,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"12515B","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Vibrant HD Clamping System Assembly For 2.5in OD Tubing - Blue Clamp","public_title":null,"options":["Default Title"],"price":16450,"weight":10000,"compare_at_price":20600,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamping-system-assembly-for-2-5in-od-tubing-blue-clamp-rzcrew.jpg?v=1710320979"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamping-system-assembly-for-2-5in-od-tubing-blue-clamp-rzcrew.jpg?v=1710320979","options":["Title"],"media":[{"alt":"Vibrant HD Clamping System Assembly For 2.5in OD Tubing - Blue Clamp","id":24718882472118,"position":1,"preview_image":{"aspect_ratio":1.75,"height":240,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamping-system-assembly-for-2-5in-od-tubing-blue-clamp-rzcrew.jpg?v=1710320979"},"aspect_ratio":1.75,"height":240,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-hd-clamping-system-assembly-for-2-5in-od-tubing-blue-clamp-rzcrew.jpg?v=1710320979","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Vibrant\u003cbr\u003eReference Number: 12515B\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eVibrant Performance Clamping Systems are constructed entirely from 6061 aluminum and provide leak-free \"modular\" connections that are capable of withstanding up to 800psi of boost pressure and temperatures up to 400 deg F. The NEW HD Clamping System's robust billet aluminum design is ideal for race applications with highly advanced pressurized air applications and turbo intake charge piping. The existing VanJen Clamp is ideal for street applications where silicone couplers may not offer the best solution. Both clamps perform great and provide a professional show-like finish to your engine bay. They are available in diameters that support O.D. tubing ranging from 2\" to 4\". \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eUniversal\u003c!--split--\u003e"}

{"id":7272799076534,"title":"Vibrant 4in HD Clamp System Assembly - Anodized Black","handle":"vibrant-4in-hd-clamp-system-assembly-anodized-black-12518","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Vibrant\u003cbr\u003eReference Number: 12518\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eVibrant Performance Clamping Systems are constructed entirely from 6061 aluminum and provide leak-free \"modular\" connections that are capable of withstanding up to 800psi of boost pressure and temperatures up to 400 deg F. The NEW HD Clamping System's robust billet aluminum design is ideal for race applications with highly advanced pressurized air applications and turbo intake charge piping. The existing VanJen Clamp is ideal for street applications where silicone couplers may not offer the best solution. Both clamps perform great and provide a professional show-like finish to your engine bay. They are available in diameters that support O.D. tubing ranging from 2\" to 4\". \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eUniversal\u003c!--split--\u003e","published_at":"2025-08-22T15:34:00+08:00","created_at":"2022-03-03T15:44:34+08:00","vendor":"Vibrant","type":"Intercooler Kits","tags":["0","1965","1966","1967","1968","1969","1970","1971","1972","1973","1974","1975","1976","1977","1978","1979","1980","1981","1982","1983","1984","1985","1986","1987","1988","1989","1990","1991","1992","1993","1994","1995","1996","1997","1998","1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","alfa-romeo","aston-martin","audi","bmw","chevrolet","citroen","daihatsu","ferrari","fiat","forced-induction","ford","honda","hyundai","intercooler-kits","kia","lexus","lotus","mazda","mercedes-benz","mini","mitsubishi","new","nissan","opel","peugeot","porsche","renault","seat","skoda","subaru","suzuki","toyota","US1","vibrant","volkswagen","volvo","ws127"],"price":16450,"price_min":16450,"price_max":16450,"available":false,"price_varies":false,"compare_at_price":20600,"compare_at_price_min":20600,"compare_at_price_max":20600,"compare_at_price_varies":false,"variants":[{"id":41264150020278,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"12518","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Vibrant 4in HD Clamp System Assembly - Anodized Black","public_title":null,"options":["Default Title"],"price":16450,"weight":10000,"compare_at_price":20600,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-4in-hd-clamp-system-assembly-anodized-black-rzcrew.jpg?v=1710320979"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-4in-hd-clamp-system-assembly-anodized-black-rzcrew.jpg?v=1710320979","options":["Title"],"media":[{"alt":"Vibrant 4in HD Clamp System Assembly - Anodized Black","id":24718882046134,"position":1,"preview_image":{"aspect_ratio":1.75,"height":240,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-4in-hd-clamp-system-assembly-anodized-black-rzcrew.jpg?v=1710320979"},"aspect_ratio":1.75,"height":240,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/vibrant-4in-hd-clamp-system-assembly-anodized-black-rzcrew.jpg?v=1710320979","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Vibrant\u003cbr\u003eReference Number: 12518\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eVibrant Performance Clamping Systems are constructed entirely from 6061 aluminum and provide leak-free \"modular\" connections that are capable of withstanding up to 800psi of boost pressure and temperatures up to 400 deg F. The NEW HD Clamping System's robust billet aluminum design is ideal for race applications with highly advanced pressurized air applications and turbo intake charge piping. The existing VanJen Clamp is ideal for street applications where silicone couplers may not offer the best solution. Both clamps perform great and provide a professional show-like finish to your engine bay. They are available in diameters that support O.D. tubing ranging from 2\" to 4\". \u003cbr\u003e\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eUniversal\u003c!--split--\u003e"}