Mishimoto

{"id":562004099099,"title":"Mishimoto - Honda Civic Si Silicone Induction Hose - Blue - FD2 FG2 - MMHOSE-CIV-06SIIHBL","handle":"mishimoto-honda-civic-si-silicone-induction-hose-blue-fd2-fg2-mmhose-civ-06siihbl","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-CIV-06SIIHBL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:27:08+08:00","created_at":"2018-01-24T23:27:09+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["2007","2008","2009","2010","civic-fd2-2007-2010-na-k20z2-i4","civic-fg2-2007-2009-na-k20z3-i4","honda","intake","intake-hoses","mishimoto","us1","ws136"],"price":19456,"price_min":19456,"price_max":19456,"available":true,"price_varies":false,"compare_at_price":30400,"compare_at_price_min":30400,"compare_at_price_max":30400,"compare_at_price_varies":false,"variants":[{"id":5990403801115,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-CIV-06SIIHBL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Honda Civic Si Silicone Induction Hose - Blue - FD2 FG2 - MMHOSE-CIV-06SIIHBL","public_title":null,"options":["Default Title"],"price":19456,"weight":4907,"compare_at_price":30400,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHBL.jpg?v=1710154199"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHBL.jpg?v=1710154199","options":["Title"],"media":[{"alt":"Mishimoto - Honda Civic Si Silicone Induction Hose - Blue - FD2 FG2 - MMHOSE-CIV-06SIIHBL - Rzcrewgarage","id":1351406813281,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHBL.jpg?v=1710154199"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHBL.jpg?v=1710154199","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-CIV-06SIIHBL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":562004131867,"title":"Mishimoto - Honda Civic Si Silicone Induction Hose - Red - FD2 FG2 - MMHOSE-CIV-06SIIHRD","handle":"mishimoto-honda-civic-si-silicone-induction-hose-red-fd2-fg2-mmhose-civ-06siihrd","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-CIV-06SIIHRD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:27:09+08:00","created_at":"2018-01-24T23:27:09+08:00","vendor":"Mishimoto","type":"intake-kits","tags":["2007","2008","2009","2010","civic-fd2-2007-2010-na-k20z2-i4","civic-fg2-2007-2009-na-k20z3-i4","honda","intake","intake-hoses","mishimoto","us1","ws136"],"price":19456,"price_min":19456,"price_max":19456,"available":true,"price_varies":false,"compare_at_price":30400,"compare_at_price_min":30400,"compare_at_price_max":30400,"compare_at_price_varies":false,"variants":[{"id":5990403866651,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-CIV-06SIIHRD","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Honda Civic Si Silicone Induction Hose - Red - FD2 FG2 - MMHOSE-CIV-06SIIHRD","public_title":null,"options":["Default Title"],"price":19456,"weight":5814,"compare_at_price":30400,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHRD.jpg?v=1710154199"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHRD.jpg?v=1710154199","options":["Title"],"media":[{"alt":"Mishimoto - Honda Civic Si Silicone Induction Hose - Red - FD2 FG2 - MMHOSE-CIV-06SIIHRD - Rzcrewgarage","id":1351406878817,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHRD.jpg?v=1710154199"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-CIV-06SIIHRD.jpg?v=1710154199","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-CIV-06SIIHRD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2006–2011 Honda Civic Si\u003cbr\u003eInstalls in under 30 minutes\u003cbr\u003eProvides an increase in engine tone and throttle response\u003cbr\u003eFits with the stock airbox\u003cbr\u003eReplaces your worn out or cracked intake boot\u003cbr\u003eSilicone construction for added durability and long service life\u003cbr\u003eReplacement worm gear clamps are provided for a quick and easy installation\u003cbr\u003eMade with molded steel rings for added reinforcement and resistance to collapsing under load\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003e\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Induction Hose w\/ pre-assembled CNC port\u003cbr\u003e(1) 80-100mm Worm Gear Clamp\u003cbr\u003e(1) 60-80mm Worm Gear Clamp\u003cbr\u003e(2) 16-27mm Worm Gear Clamps\u003cbr\u003e\u003cbr\u003eNote Installation Torque Specs\u003cbr\u003e22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M). \u003cbr\u003e\u003cbr\u003eThis induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake.\u003cbr\u003eThis will not fit EX \/ LX models.\u003cbr\u003eChassis Codes FA5, FG2, FD2\u003cbr\u003eEngine Codes K20Z3\u003cbr\u003e\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter 2.95\" (75mm) – 3.50\" (90mm)\u003cbr\u003eInner Diameter 2.56\" (65mm) – 3.10\" (79mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eDon’t stifle your VTEC—let it breathe free with the latest in our line of Honda Civic performance parts! This Mishimoto Civic Si silicone induction hose replaces the accordion-style stock airbox hose with a high-quality silicone unit. These 5-layer silicone hoses feature heat-resistant embedded fibers for increased pressure and heat tolerances. Molded steel rings help increase structural rigidity so collapsing doesn’t occur when VTEC kicks in! This Civic Si induction hose is designed to work with the stock airbox, and produce increased power figures without the need for a full aftermarket intake system. To improve airflow, these hoses feature smoothed internal dimensions to allow for maximum flow to your throttle body. This Civic Si induction hose is the perfect balance between performance gains and stock efficiency, and, like all Mishimoto Civic Si performance parts, feature the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561986076699,"title":"Mishimoto - Honda S2000 Oil Cooler Kit - AP1 AP2 - MMOC-S2K-00","handle":"mishimoto-honda-s2000-oil-cooler-kit-ap1-ap2-mmoc-s2k-00","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-S2K-00\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDramatic temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Honda S2000\u003cbr\u003eThermostatic option available\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote AP1 S2000 (2000–2003) vehicles will require minor bending of A\/C lines for cooler and bracket installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes F20C, F22C\u003cbr\u003eChassis Codes AP1 ,AP2\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets (Including Horn Relocation Bracket)\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 8in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system. Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000. This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability. It includes preassembled stainless steel lines and S2000 specific mounting brackets for a painless and clean installation. The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDramatic temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Honda S2000\u003cbr\u003eThermostatic option available\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote AP1 S2000 (2000–2003) vehicles will require minor bending of A\/C lines for cooler and bracket installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes F20C, F22C\u003cbr\u003eChassis Codes AP1 ,AP2\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets (Including Horn Relocation Bracket)\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 8in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system. Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000. This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability. It includes preassembled stainless steel lines and S2000 specific mounting brackets for a painless and clean installation. The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 4 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:03+08:00","created_at":"2018-01-24T23:24:04+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","car-specific","cooling","honda","mishimoto","oil-cooler-kits","oil-coolers","s2000-ap1-1999-2003-na-f20c-i4","s2000-ap2-2003-2009-na-f22c-i4","us1","ws112"],"price":73216,"price_min":73216,"price_max":73216,"available":true,"price_varies":false,"compare_at_price":83200,"compare_at_price_min":83200,"compare_at_price_max":83200,"compare_at_price_varies":false,"variants":[{"id":5990381813787,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-S2K-00","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Honda S2000 Oil Cooler Kit - AP1 AP2 - MMOC-S2K-00","public_title":null,"options":["Default Title"],"price":73216,"weight":8899,"compare_at_price":83200,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-S2K-00.jpg?v=1710154068"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-S2K-00.jpg?v=1710154068","options":["Title"],"media":[{"alt":"Mishimoto - Honda S2000 Oil Cooler Kit - AP1 AP2 - MMOC-S2K-00 - Rzcrewgarage","id":1351399309409,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-S2K-00.jpg?v=1710154068"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-S2K-00.jpg?v=1710154068","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-S2K-00\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDramatic temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Honda S2000\u003cbr\u003eThermostatic option available\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote AP1 S2000 (2000–2003) vehicles will require minor bending of A\/C lines for cooler and bracket installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes F20C, F22C\u003cbr\u003eChassis Codes AP1 ,AP2\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets (Including Horn Relocation Bracket)\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 8in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system. Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000. This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability. It includes preassembled stainless steel lines and S2000 specific mounting brackets for a painless and clean installation. The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDramatic temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Honda S2000\u003cbr\u003eThermostatic option available\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote AP1 S2000 (2000–2003) vehicles will require minor bending of A\/C lines for cooler and bracket installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes F20C, F22C\u003cbr\u003eChassis Codes AP1 ,AP2\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets (Including Horn Relocation Bracket)\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 8in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system. Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000. This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability. It includes preassembled stainless steel lines and S2000 specific mounting brackets for a painless and clean installation. The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 4 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561986109467,"title":"Mishimoto - Honda S2000 Oil Cooler Kit, Black - Black - AP1 AP2 - MMOC-S2K-00BK","handle":"mishimoto-honda-s2000-oil-cooler-kit-black-black-ap1-ap2-mmoc-s2k-00bk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-S2K-00BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDramatic temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Honda S2000\u003cbr\u003eThermostatic option available\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote AP1 S2000 (2000–2003) vehicles will require minor bending of A\/C lines for cooler and bracket installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes F20C, F22C\u003cbr\u003eChassis Codes AP1 ,AP2\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets (Including Horn Relocation Bracket)\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 8in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system. Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000. This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability. It includes preassembled stainless steel lines and S2000 specific mounting brackets for a painless and clean installation. The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDramatic temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Honda S2000\u003cbr\u003eThermostatic option available\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote AP1 S2000 (2000–2003) vehicles will require minor bending of A\/C lines for cooler and bracket installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes F20C, F22C\u003cbr\u003eChassis Codes AP1 ,AP2\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets (Including Horn Relocation Bracket)\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 8in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system. Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000. This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability. It includes preassembled stainless steel lines and S2000 specific mounting brackets for a painless and clean installation. The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:04+08:00","created_at":"2018-01-24T23:24:05+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","car-specific","cooling","honda","mishimoto","oil-cooler-kits","oil-coolers","s2000-ap1-1999-2003-na-f20c-i4","s2000-ap2-2003-2009-na-f22c-i4","us1","ws112"],"price":73216,"price_min":73216,"price_max":73216,"available":true,"price_varies":false,"compare_at_price":83200,"compare_at_price_min":83200,"compare_at_price_max":83200,"compare_at_price_varies":false,"variants":[{"id":5990382764059,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-S2K-00BK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Honda S2000 Oil Cooler Kit, Black - Black - AP1 AP2 - MMOC-S2K-00BK","public_title":null,"options":["Default Title"],"price":73216,"weight":8944,"compare_at_price":83200,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-S2K-00BK.jpg?v=1710154068"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-S2K-00BK.jpg?v=1710154068","options":["Title"],"media":[{"alt":"Mishimoto - Honda S2000 Oil Cooler Kit, Black - Black - AP1 AP2 - MMOC-S2K-00BK - Rzcrewgarage","id":1351399342177,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-S2K-00BK.jpg?v=1710154068"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-S2K-00BK.jpg?v=1710154068","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-S2K-00BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDramatic temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Honda S2000\u003cbr\u003eThermostatic option available\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote AP1 S2000 (2000–2003) vehicles will require minor bending of A\/C lines for cooler and bracket installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes F20C, F22C\u003cbr\u003eChassis Codes AP1 ,AP2\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets (Including Horn Relocation Bracket)\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 8in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system. Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000. This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability. It includes preassembled stainless steel lines and S2000 specific mounting brackets for a painless and clean installation. The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDramatic temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Honda S2000\u003cbr\u003eThermostatic option available\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote AP1 S2000 (2000–2003) vehicles will require minor bending of A\/C lines for cooler and bracket installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes F20C, F22C\u003cbr\u003eChassis Codes AP1 ,AP2\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets (Including Horn Relocation Bracket)\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 8in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system. Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000. This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability. It includes preassembled stainless steel lines and S2000 specific mounting brackets for a painless and clean installation. The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561986142235,"title":"Mishimoto - Honda S2000 Thermostatic Oil Cooler Kit - AP1 AP2 - MMOC-S2K-00T","handle":"mishimoto-honda-s2000-thermostatic-oil-cooler-kit-ap1-ap2-mmoc-s2k-00t","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-S2K-00T\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDramatic temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Honda S2000\u003cbr\u003eThermostatic option available\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote AP1 S2000 (2000–2003) vehicles will require minor bending of A\/C lines for cooler and bracket installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes F20C, F22C\u003cbr\u003eChassis Codes AP1 ,AP2\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets (Including Horn Relocation Bracket)\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 8in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system. Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000. This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability. It includes preassembled stainless steel lines and S2000 specific mounting brackets for a painless and clean installation. The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDramatic temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Honda S2000\u003cbr\u003eThermostatic option available\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote AP1 S2000 (2000–2003) vehicles will require minor bending of A\/C lines for cooler and bracket installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes F20C, F22C\u003cbr\u003eChassis Codes AP1 ,AP2\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets (Including Horn Relocation Bracket)\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 8in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system. Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000. This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability. It includes preassembled stainless steel lines and S2000 specific mounting brackets for a painless and clean installation. The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:05+08:00","created_at":"2018-01-24T23:24:06+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","car-specific","cooling","honda","mishimoto","oil-cooler-kits","oil-coolers","s2000-ap1-1999-2003-na-f20c-i4","s2000-ap2-2003-2009-na-f22c-i4","us1","ws110"],"price":82890,"price_min":82890,"price_max":82890,"available":true,"price_varies":false,"compare_at_price":92100,"compare_at_price_min":92100,"compare_at_price_max":92100,"compare_at_price_varies":false,"variants":[{"id":5990382796827,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-S2K-00T","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Honda S2000 Thermostatic Oil Cooler Kit - AP1 AP2 - MMOC-S2K-00T","public_title":null,"options":["Default Title"],"price":82890,"weight":9126,"compare_at_price":92100,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-S2K-00T.jpg?v=1710154068"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-S2K-00T.jpg?v=1710154068","options":["Title"],"media":[{"alt":"Mishimoto - Honda S2000 Thermostatic Oil Cooler Kit - AP1 AP2 - MMOC-S2K-00T - Rzcrewgarage","id":1351399374945,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-S2K-00T.jpg?v=1710154068"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-S2K-00T.jpg?v=1710154068","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-S2K-00T\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDramatic temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Honda S2000\u003cbr\u003eThermostatic option available\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote AP1 S2000 (2000–2003) vehicles will require minor bending of A\/C lines for cooler and bracket installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes F20C, F22C\u003cbr\u003eChassis Codes AP1 ,AP2\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets (Including Horn Relocation Bracket)\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 8in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system. Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000. This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability. It includes preassembled stainless steel lines and S2000 specific mounting brackets for a painless and clean installation. The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDramatic temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Honda S2000\u003cbr\u003eThermostatic option available\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote AP1 S2000 (2000–2003) vehicles will require minor bending of A\/C lines for cooler and bracket installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes F20C, F22C\u003cbr\u003eChassis Codes AP1 ,AP2\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets (Including Horn Relocation Bracket)\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 8in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system. Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000. This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability. It includes preassembled stainless steel lines and S2000 specific mounting brackets for a painless and clean installation. The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561986175003,"title":"Mishimoto - Honda S2000 Thermostatic Oil Cooler Kit, Black - Black - AP1 AP2 - MMOC-S2K-00TBK","handle":"mishimoto-honda-s2000-thermostatic-oil-cooler-kit-black-black-ap1-ap2-mmoc-s2k-00tbk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-S2K-00TBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDramatic temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Honda S2000\u003cbr\u003eThermostatic option available\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote AP1 S2000 (2000–2003) vehicles will require minor bending of A\/C lines for cooler and bracket installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes F20C, F22C\u003cbr\u003eChassis Codes AP1 ,AP2\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets (Including Horn Relocation Bracket)\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 8in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system. Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000. This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability. It includes preassembled stainless steel lines and S2000 specific mounting brackets for a painless and clean installation. The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDramatic temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Honda S2000\u003cbr\u003eThermostatic option available\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote AP1 S2000 (2000–2003) vehicles will require minor bending of A\/C lines for cooler and bracket installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes F20C, F22C\u003cbr\u003eChassis Codes AP1 ,AP2\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets (Including Horn Relocation Bracket)\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 8in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system. Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000. This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability. It includes preassembled stainless steel lines and S2000 specific mounting brackets for a painless and clean installation. The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:06+08:00","created_at":"2018-01-24T23:24:06+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["1999","2000","2001","2002","2003","2004","2005","2006","2007","2008","2009","car-specific","cooling","honda","mishimoto","oil-cooler-kits","oil-coolers","s2000-ap1-1999-2003-na-f20c-i4","s2000-ap2-2003-2009-na-f22c-i4","us1","ws110"],"price":82890,"price_min":82890,"price_max":82890,"available":true,"price_varies":false,"compare_at_price":92100,"compare_at_price_min":92100,"compare_at_price_max":92100,"compare_at_price_varies":false,"variants":[{"id":5990382829595,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-S2K-00TBK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Honda S2000 Thermostatic Oil Cooler Kit, Black - Black - AP1 AP2 - MMOC-S2K-00TBK","public_title":null,"options":["Default Title"],"price":82890,"weight":9126,"compare_at_price":92100,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-S2K-00TBK.jpg?v=1710154075"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-S2K-00TBK.jpg?v=1710154075","options":["Title"],"media":[{"alt":"Mishimoto - Honda S2000 Thermostatic Oil Cooler Kit, Black - Black - AP1 AP2 - MMOC-S2K-00TBK - Rzcrewgarage","id":1351399407713,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-S2K-00TBK.jpg?v=1710154075"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-S2K-00TBK.jpg?v=1710154075","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-S2K-00TBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDramatic temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Honda S2000\u003cbr\u003eThermostatic option available\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote AP1 S2000 (2000–2003) vehicles will require minor bending of A\/C lines for cooler and bracket installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes F20C, F22C\u003cbr\u003eChassis Codes AP1 ,AP2\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets (Including Horn Relocation Bracket)\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 8in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system. Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000. This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability. It includes preassembled stainless steel lines and S2000 specific mounting brackets for a painless and clean installation. The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDramatic temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Honda S2000\u003cbr\u003eThermostatic option available\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth black and sleek silver cooler options\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote AP1 S2000 (2000–2003) vehicles will require minor bending of A\/C lines for cooler and bracket installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes F20C, F22C\u003cbr\u003eChassis Codes AP1 ,AP2\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets (Including Horn Relocation Bracket)\u003cbr\u003e(1) 19-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 8in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eWhether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system. Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000. This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability. It includes preassembled stainless steel lines and S2000 specific mounting brackets for a painless and clean installation. The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561996955675,"title":"Mishimoto - Lexus IS300 Silicone Radiator Hose Kit - Black - XE10 - MMHOSE-IS300-01BK","handle":"mishimoto-lexus-is300-silicone-radiator-hose-kit-black-xe10-mmhose-is300-01bk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-IS300-01BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2001–2005 Lexus IS300\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Silicone Hoses\u003cbr\u003e\u003cbr\u003eChassis Codes XE10\u003cbr\u003eEngine Codes 2JZ-GE\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 1.70\" \u003cbr\u003eHose 2: 1.70\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 1.32\" \u003cbr\u003eHose 2: 1.32\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto Lexus IS300 silicone radiator hose kits are made with a dual layer combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all with an OEM replacement fit. Perfect for your street or track IS300.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2001–2005 Lexus IS300\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Silicone Hoses\u003cbr\u003e\u003cbr\u003eChassis Codes XE10\u003cbr\u003eEngine Codes 2JZ-GE\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 1.70\" \u003cbr\u003eHose 2: 1.70\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 1.32\" \u003cbr\u003eHose 2: 1.32\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto Lexus IS300 silicone radiator hose kits are made with a dual layer combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all with an OEM replacement fit. Perfect for your street or track IS300.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:26:02+08:00","created_at":"2018-01-24T23:26:02+08:00","vendor":"Mishimoto","type":"Cooling Hoses","tags":["2006","2007","cooling","cooling-hoses","is-300-xe10-2006-2007-na-2jz-ge-i6","lexus","mishimoto","radiator-hose-kits","us1","ws136"],"price":17920,"price_min":17920,"price_max":17920,"available":true,"price_varies":false,"compare_at_price":28000,"compare_at_price_min":28000,"compare_at_price_max":28000,"compare_at_price_varies":false,"variants":[{"id":5990396133403,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-IS300-01BK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Lexus IS300 Silicone Radiator Hose Kit - Black - XE10 - MMHOSE-IS300-01BK","public_title":null,"options":["Default Title"],"price":17920,"weight":4590,"compare_at_price":28000,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-IS300-01BK.jpg?v=1710154143"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-IS300-01BK.jpg?v=1710154143","options":["Title"],"media":[{"alt":"Mishimoto - Lexus IS300 Silicone Radiator Hose Kit - Black - XE10 - MMHOSE-IS300-01BK - Rzcrewgarage","id":1351403405409,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-IS300-01BK.jpg?v=1710154143"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-IS300-01BK.jpg?v=1710154143","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-IS300-01BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2001–2005 Lexus IS300\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Silicone Hoses\u003cbr\u003e\u003cbr\u003eChassis Codes XE10\u003cbr\u003eEngine Codes 2JZ-GE\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 1.70\" \u003cbr\u003eHose 2: 1.70\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 1.32\" \u003cbr\u003eHose 2: 1.32\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto Lexus IS300 silicone radiator hose kits are made with a dual layer combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all with an OEM replacement fit. Perfect for your street or track IS300.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2001–2005 Lexus IS300\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Silicone Hoses\u003cbr\u003e\u003cbr\u003eChassis Codes XE10\u003cbr\u003eEngine Codes 2JZ-GE\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 1.70\" \u003cbr\u003eHose 2: 1.70\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 1.32\" \u003cbr\u003eHose 2: 1.32\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto Lexus IS300 silicone radiator hose kits are made with a dual layer combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all with an OEM replacement fit. Perfect for your street or track IS300.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561996988443,"title":"Mishimoto - Lexus IS300 Silicone Radiator Hose Kit - Blue - XE10 - MMHOSE-IS300-01BL","handle":"mishimoto-lexus-is300-silicone-radiator-hose-kit-blue-xe10-mmhose-is300-01bl","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-IS300-01BL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2001–2005 Lexus IS300\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Silicone Hoses\u003cbr\u003e\u003cbr\u003eChassis Codes XE10\u003cbr\u003eEngine Codes 2JZ-GE\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 1.70\" \u003cbr\u003eHose 2: 1.70\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 1.32\" \u003cbr\u003eHose 2: 1.32\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto Lexus IS300 silicone radiator hose kits are made with a dual layer combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all with an OEM replacement fit. Perfect for your street or track IS300.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2001–2005 Lexus IS300\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Silicone Hoses\u003cbr\u003e\u003cbr\u003eChassis Codes XE10\u003cbr\u003eEngine Codes 2JZ-GE\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 1.70\" \u003cbr\u003eHose 2: 1.70\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 1.32\" \u003cbr\u003eHose 2: 1.32\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto Lexus IS300 silicone radiator hose kits are made with a dual layer combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all with an OEM replacement fit. Perfect for your street or track IS300.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:26:02+08:00","created_at":"2018-01-24T23:26:03+08:00","vendor":"Mishimoto","type":"Cooling Hoses","tags":["2006","2007","cooling","cooling-hoses","is-300-xe10-2006-2007-na-2jz-ge-i6","lexus","mishimoto","radiator-hose-kits","us1","ws136"],"price":17920,"price_min":17920,"price_max":17920,"available":true,"price_varies":false,"compare_at_price":28000,"compare_at_price_min":28000,"compare_at_price_max":28000,"compare_at_price_varies":false,"variants":[{"id":5990396166171,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-IS300-01BL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Lexus IS300 Silicone Radiator Hose Kit - Blue - XE10 - MMHOSE-IS300-01BL","public_title":null,"options":["Default Title"],"price":17920,"weight":4544,"compare_at_price":28000,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-IS300-01BL.jpg?v=1710154143"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-IS300-01BL.jpg?v=1710154143","options":["Title"],"media":[{"alt":"Mishimoto - Lexus IS300 Silicone Radiator Hose Kit - Blue - XE10 - MMHOSE-IS300-01BL - Rzcrewgarage","id":1351403438177,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-IS300-01BL.jpg?v=1710154143"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-IS300-01BL.jpg?v=1710154143","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-IS300-01BL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2001–2005 Lexus IS300\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Silicone Hoses\u003cbr\u003e\u003cbr\u003eChassis Codes XE10\u003cbr\u003eEngine Codes 2JZ-GE\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 1.70\" \u003cbr\u003eHose 2: 1.70\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 1.32\" \u003cbr\u003eHose 2: 1.32\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto Lexus IS300 silicone radiator hose kits are made with a dual layer combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all with an OEM replacement fit. Perfect for your street or track IS300.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2001–2005 Lexus IS300\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Silicone Hoses\u003cbr\u003e\u003cbr\u003eChassis Codes XE10\u003cbr\u003eEngine Codes 2JZ-GE\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 1.70\" \u003cbr\u003eHose 2: 1.70\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 1.32\" \u003cbr\u003eHose 2: 1.32\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto Lexus IS300 silicone radiator hose kits are made with a dual layer combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all with an OEM replacement fit. Perfect for your street or track IS300.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561997021211,"title":"Mishimoto - Lexus IS300 Silicone Radiator Hose Kit - Red - XE10 - MMHOSE-IS300-01RD","handle":"mishimoto-lexus-is300-silicone-radiator-hose-kit-red-xe10-mmhose-is300-01rd","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-IS300-01RD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2001–2005 Lexus IS300\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Silicone Hoses\u003cbr\u003e\u003cbr\u003eChassis Codes XE10\u003cbr\u003eEngine Codes 2JZ-GE\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 1.70\" \u003cbr\u003eHose 2: 1.70\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 1.32\" \u003cbr\u003eHose 2: 1.32\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto Lexus IS300 silicone radiator hose kits are made with a dual layer combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all with an OEM replacement fit. Perfect for your street or track IS300.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2001–2005 Lexus IS300\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Silicone Hoses\u003cbr\u003e\u003cbr\u003eChassis Codes XE10\u003cbr\u003eEngine Codes 2JZ-GE\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 1.70\" \u003cbr\u003eHose 2: 1.70\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 1.32\" \u003cbr\u003eHose 2: 1.32\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto Lexus IS300 silicone radiator hose kits are made with a dual layer combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all with an OEM replacement fit. Perfect for your street or track IS300.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:26:03+08:00","created_at":"2018-01-24T23:26:04+08:00","vendor":"Mishimoto","type":"Cooling Hoses","tags":["2006","2007","cooling","cooling-hoses","is-300-xe10-2006-2007-na-2jz-ge-i6","lexus","mishimoto","radiator-hose-kits","us1","ws136"],"price":17920,"price_min":17920,"price_max":17920,"available":true,"price_varies":false,"compare_at_price":28000,"compare_at_price_min":28000,"compare_at_price_max":28000,"compare_at_price_varies":false,"variants":[{"id":5990396198939,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-IS300-01RD","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Lexus IS300 Silicone Radiator Hose Kit - Red - XE10 - MMHOSE-IS300-01RD","public_title":null,"options":["Default Title"],"price":17920,"weight":4590,"compare_at_price":28000,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-IS300-01RD.jpg?v=1710154143"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-IS300-01RD.jpg?v=1710154143","options":["Title"],"media":[{"alt":"Mishimoto - Lexus IS300 Silicone Radiator Hose Kit - Red - XE10 - MMHOSE-IS300-01RD - Rzcrewgarage","id":1351403470945,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-IS300-01RD.jpg?v=1710154143"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-IS300-01RD.jpg?v=1710154143","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-IS300-01RD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2001–2005 Lexus IS300\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Silicone Hoses\u003cbr\u003e\u003cbr\u003eChassis Codes XE10\u003cbr\u003eEngine Codes 2JZ-GE\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 1.70\" \u003cbr\u003eHose 2: 1.70\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 1.32\" \u003cbr\u003eHose 2: 1.32\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto Lexus IS300 silicone radiator hose kits are made with a dual layer combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all with an OEM replacement fit. Perfect for your street or track IS300.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2001–2005 Lexus IS300\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(2) Silicone Hoses\u003cbr\u003e\u003cbr\u003eChassis Codes XE10\u003cbr\u003eEngine Codes 2JZ-GE\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 1.70\" \u003cbr\u003eHose 2: 1.70\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 1.32\" \u003cbr\u003eHose 2: 1.32\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto Lexus IS300 silicone radiator hose kits are made with a dual layer combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all with an OEM replacement fit. Perfect for your street or track IS300.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":7606808412342,"title":"Mishimoto - Mazda RX-8 Silicone Radiator Hose Kit - Black - SE3P - MMHOSE-RX8-03BK","handle":"mishimoto-mazda-rx-8-silicone-radiator-hose-kit-black-se3p-mmhose-rx8-03bk","description":null,"published_at":"2023-07-18T09:26:36+08:00","created_at":"2023-06-08T11:31:53+08:00","vendor":"Mishimoto","type":"Cooling Hoses","tags":["2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","cooling","cooling-hoses","mazda","mishimoto","radiator-hose-kits","rx-8-se3p-kouki-2008-2013-na-13b-msp-r","rx-8-se3p-zenki-2003-2008-na-13b-msp-r","us1","ws136"],"price":16896,"price_min":16896,"price_max":16896,"available":true,"price_varies":false,"compare_at_price":26400,"compare_at_price_min":26400,"compare_at_price_max":26400,"compare_at_price_varies":false,"variants":[{"id":42261633826998,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-RX8-03BK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Mazda RX-8 Silicone Radiator Hose Kit - Black - SE3P - MMHOSE-RX8-03BK","public_title":null,"options":["Default Title"],"price":16896,"weight":4680,"compare_at_price":26400,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":[],"featured_image":null,"options":["Title"],"requires_selling_plan":false,"selling_plan_groups":[],"content":null}

{"id":562002231323,"title":"Mishimoto - Mazda RX-8 Silicone Radiator Hose Kit - Blue - SE3P - MMHOSE-RX8-03BL","handle":"mishimoto-mazda-rx-8-silicone-radiator-hose-kit-blue-se3p-mmhose-rx8-03bl","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-RX8-03BL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2004–2008 Mazda RX-8\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eMax Temp 330°F\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto Mazda RX-8 silicone radiator hose kits are made with a dual layer combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all with an OEM replacement fit. Perfect for your RX-8.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2004–2008 Mazda RX-8\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eMax Temp 330°F\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto Mazda RX-8 silicone radiator hose kits are made with a dual layer combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all with an OEM replacement fit. Perfect for your RX-8.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:26:51+08:00","created_at":"2018-01-24T23:26:51+08:00","vendor":"Mishimoto","type":"Cooling Hoses","tags":["2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","cooling","cooling-hoses","mazda","mishimoto","radiator-hose-kits","rx-8-se3p-kouki-2008-2013-na-13b-msp-r","rx-8-se3p-zenki-2003-2008-na-13b-msp-r","us1","ws136"],"price":16896,"price_min":16896,"price_max":16896,"available":true,"price_varies":false,"compare_at_price":26400,"compare_at_price_min":26400,"compare_at_price_max":26400,"compare_at_price_varies":false,"variants":[{"id":5990401802267,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-RX8-03BL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Mazda RX-8 Silicone Radiator Hose Kit - Blue - SE3P - MMHOSE-RX8-03BL","public_title":null,"options":["Default Title"],"price":16896,"weight":4680,"compare_at_price":26400,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-RX8-03BL.jpg?v=1710154183"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-RX8-03BL.jpg?v=1710154183","options":["Title"],"media":[{"alt":"Mishimoto - Mazda RX-8 Silicone Radiator Hose Kit - Blue - SE3P - MMHOSE-RX8-03BL - Rzcrewgarage","id":1351405863009,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-RX8-03BL.jpg?v=1710154183"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-RX8-03BL.jpg?v=1710154183","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-RX8-03BL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2004–2008 Mazda RX-8\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eMax Temp 330°F\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto Mazda RX-8 silicone radiator hose kits are made with a dual layer combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all with an OEM replacement fit. Perfect for your RX-8.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2004–2008 Mazda RX-8\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eMax Temp 330°F\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto Mazda RX-8 silicone radiator hose kits are made with a dual layer combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all with an OEM replacement fit. Perfect for your RX-8.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":562002329627,"title":"Mishimoto - Mazda RX-8 Silicone Radiator Hose Kit - Red - SE3P - MMHOSE-RX8-03RD","handle":"mishimoto-mazda-rx-8-silicone-radiator-hose-kit-red-se3p-mmhose-rx8-03rd","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-RX8-03RD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2004–2008 Mazda RX-8\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eMax Temp 330°F\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto Mazda RX-8 silicone radiator hose kits are made with a dual layer combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all with an OEM replacement fit. Perfect for your RX-8.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2004–2008 Mazda RX-8\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eMax Temp 330°F\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto Mazda RX-8 silicone radiator hose kits are made with a dual layer combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all with an OEM replacement fit. Perfect for your RX-8.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 5 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:26:51+08:00","created_at":"2018-01-24T23:26:52+08:00","vendor":"Mishimoto","type":"Cooling Hoses","tags":["2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","cooling","cooling-hoses","mazda","mishimoto","radiator-hose-kits","rx-8-se3p-kouki-2008-2013-na-13b-msp-r","rx-8-se3p-zenki-2003-2008-na-13b-msp-r","us1","ws136"],"price":16896,"price_min":16896,"price_max":16896,"available":true,"price_varies":false,"compare_at_price":26400,"compare_at_price_min":26400,"compare_at_price_max":26400,"compare_at_price_varies":false,"variants":[{"id":5990401900571,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-RX8-03RD","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Mazda RX-8 Silicone Radiator Hose Kit - Red - SE3P - MMHOSE-RX8-03RD","public_title":null,"options":["Default Title"],"price":16896,"weight":4726,"compare_at_price":26400,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-RX8-03RD.jpg?v=1710154184"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-RX8-03RD.jpg?v=1710154184","options":["Title"],"media":[{"alt":"Mishimoto - Mazda RX-8 Silicone Radiator Hose Kit - Red - SE3P - MMHOSE-RX8-03RD - Rzcrewgarage","id":1351405895777,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-RX8-03RD.jpg?v=1710154184"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-RX8-03RD.jpg?v=1710154184","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-RX8-03RD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2004–2008 Mazda RX-8\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eMax Temp 330°F\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto Mazda RX-8 silicone radiator hose kits are made with a dual layer combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all with an OEM replacement fit. Perfect for your RX-8.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for 2004–2008 Mazda RX-8\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003eMax Temp 330°F\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto Mazda RX-8 silicone radiator hose kits are made with a dual layer combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all with an OEM replacement fit. Perfect for your RX-8.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 5 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561990926363,"title":"Mishimoto - Mazda RX8 Oil Line Kit - SE3P - MMSBH-RX8-04K","handle":"mishimoto-mazda-rx8-oil-line-kit-se3p-mmsbh-rx8-04k","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMSBH-RX8-04K\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2004–2011 Mazda RX-8\u003cbr\u003ePremade braided stainless steel oil lines and aluminum fittings replace corrosion-prone stock rubber lines\u003cbr\u003eFull kit includes four braided stainless steel oil lines, M18 banjo bolts, and all the necessary fittings and oil seals for a trouble-free installation\u003cbr\u003eOil lines come prelabeled for easy identification\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Stainless Steel\u003cbr\u003eMax Recommended PSI 750psi\u003cbr\u003eMin Temp -40°F\u003cbr\u003eNote This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eMax Temp +300°F\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 13B-MSP (Renesis)\u003cbr\u003eChassis Codes SE3P\u003cbr\u003eCaution This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) 2ft, 4in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(1) 4ft, 8in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 4in Stainless Steel Braided Hose with 45 Degree and Straight -10AN Fittings\u003cbr\u003e(1) 2ft, 2in Stainless Steel Braided Hose with 90 Degree and Straight -10AN Fittings\u003cbr\u003e(4) M18 x -10AN Fittings w\/ Dowty Oil Seals\u003cbr\u003e(2) M18 x -10AN Banjo Bolts w\/ Dowty Oil Seals\u003cbr\u003e(1) 10AN – 10AN Male Connector\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mazda RX-8 has a high-winding rotary engine capable of easily reaching 9,000 RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX-8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine’s oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber oil lines and steel fittings can severely corrode and degrade over time. \u003cbr\u003e\u003cbr\u003eThis full kit from Mishimoto replaces all the RX-8 oil cooler lines with braided stainless units and aluminum fittings that will not corrode or degrade over time. This oil line kit also replaces the most frequent line to corrode, which is located on the left hand side of the car near the front suspension assembly. With Mishimoto replacement Mazda RX-8 oil cooler lines, all oil lines between the engine and both oil coolers are replaced, including the intermediate line that spans both oil coolers found in all manual transmission models. \u003cbr\u003e\u003cbr\u003eThese Mazda RX-8 oil cooler lines fit onto the vehicle with no additional modification, and d not require any cutting to your vehicle or permanent removal of parts. This oil line kit comes with all banjo bolts, M18 fittings, and a male to male -10AN connector to complete the installation. Keep your RX-8 protected and running smooth! As with all our products, these RX-8 oil cooler lines include the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2004–2011 Mazda RX-8\u003cbr\u003ePremade braided stainless steel oil lines and aluminum fittings replace corrosion-prone stock rubber lines\u003cbr\u003eFull kit includes four braided stainless steel oil lines, M18 banjo bolts, and all the necessary fittings and oil seals for a trouble-free installation\u003cbr\u003eOil lines come prelabeled for easy identification\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Stainless Steel\u003cbr\u003eMax Recommended PSI 750psi\u003cbr\u003eMin Temp -40°F\u003cbr\u003eNote This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eMax Temp +300°F\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 13B-MSP (Renesis)\u003cbr\u003eChassis Codes SE3P\u003cbr\u003eCaution This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) 2ft, 4in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(1) 4ft, 8in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 4in Stainless Steel Braided Hose with 45 Degree and Straight -10AN Fittings\u003cbr\u003e(1) 2ft, 2in Stainless Steel Braided Hose with 90 Degree and Straight -10AN Fittings\u003cbr\u003e(4) M18 x -10AN Fittings w\/ Dowty Oil Seals\u003cbr\u003e(2) M18 x -10AN Banjo Bolts w\/ Dowty Oil Seals\u003cbr\u003e(1) 10AN – 10AN Male Connector\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mazda RX-8 has a high-winding rotary engine capable of easily reaching 9,000 RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX-8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine’s oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber oil lines and steel fittings can severely corrode and degrade over time. \u003cbr\u003e\u003cbr\u003eThis full kit from Mishimoto replaces all the RX-8 oil cooler lines with braided stainless units and aluminum fittings that will not corrode or degrade over time. This oil line kit also replaces the most frequent line to corrode, which is located on the left hand side of the car near the front suspension assembly. With Mishimoto replacement Mazda RX-8 oil cooler lines, all oil lines between the engine and both oil coolers are replaced, including the intermediate line that spans both oil coolers found in all manual transmission models. \u003cbr\u003e\u003cbr\u003eThese Mazda RX-8 oil cooler lines fit onto the vehicle with no additional modification, and d not require any cutting to your vehicle or permanent removal of parts. This oil line kit comes with all banjo bolts, M18 fittings, and a male to male -10AN connector to complete the installation. Keep your RX-8 protected and running smooth! As with all our products, these RX-8 oil cooler lines include the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:25:05+08:00","created_at":"2018-01-24T23:25:05+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","car-specific","cooling","mazda","mishimoto","oil-cooler-hoses","oil-coolers","rx-8-se3p-kouki-2008-2013-na-13b-msp-r","rx-8-se3p-zenki-2003-2008-na-13b-msp-r","us1","ws122"],"price":71760,"price_min":71760,"price_max":71760,"available":true,"price_varies":false,"compare_at_price":92000,"compare_at_price_min":92000,"compare_at_price_max":92000,"compare_at_price_varies":false,"variants":[{"id":5990388203547,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMSBH-RX8-04K","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Mazda RX8 Oil Line Kit - SE3P - MMSBH-RX8-04K","public_title":null,"options":["Default Title"],"price":71760,"weight":7719,"compare_at_price":92000,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMSBH-RX8-04K.jpg?v=1710154108"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMSBH-RX8-04K.jpg?v=1710154108","options":["Title"],"media":[{"alt":"Mishimoto - Mazda RX8 Oil Line Kit - SE3P - MMSBH-RX8-04K - Rzcrewgarage","id":1351401504865,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMSBH-RX8-04K.jpg?v=1710154108"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMSBH-RX8-04K.jpg?v=1710154108","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMSBH-RX8-04K\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2004–2011 Mazda RX-8\u003cbr\u003ePremade braided stainless steel oil lines and aluminum fittings replace corrosion-prone stock rubber lines\u003cbr\u003eFull kit includes four braided stainless steel oil lines, M18 banjo bolts, and all the necessary fittings and oil seals for a trouble-free installation\u003cbr\u003eOil lines come prelabeled for easy identification\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Stainless Steel\u003cbr\u003eMax Recommended PSI 750psi\u003cbr\u003eMin Temp -40°F\u003cbr\u003eNote This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eMax Temp +300°F\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 13B-MSP (Renesis)\u003cbr\u003eChassis Codes SE3P\u003cbr\u003eCaution This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) 2ft, 4in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(1) 4ft, 8in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 4in Stainless Steel Braided Hose with 45 Degree and Straight -10AN Fittings\u003cbr\u003e(1) 2ft, 2in Stainless Steel Braided Hose with 90 Degree and Straight -10AN Fittings\u003cbr\u003e(4) M18 x -10AN Fittings w\/ Dowty Oil Seals\u003cbr\u003e(2) M18 x -10AN Banjo Bolts w\/ Dowty Oil Seals\u003cbr\u003e(1) 10AN – 10AN Male Connector\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mazda RX-8 has a high-winding rotary engine capable of easily reaching 9,000 RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX-8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine’s oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber oil lines and steel fittings can severely corrode and degrade over time. \u003cbr\u003e\u003cbr\u003eThis full kit from Mishimoto replaces all the RX-8 oil cooler lines with braided stainless units and aluminum fittings that will not corrode or degrade over time. This oil line kit also replaces the most frequent line to corrode, which is located on the left hand side of the car near the front suspension assembly. With Mishimoto replacement Mazda RX-8 oil cooler lines, all oil lines between the engine and both oil coolers are replaced, including the intermediate line that spans both oil coolers found in all manual transmission models. \u003cbr\u003e\u003cbr\u003eThese Mazda RX-8 oil cooler lines fit onto the vehicle with no additional modification, and d not require any cutting to your vehicle or permanent removal of parts. This oil line kit comes with all banjo bolts, M18 fittings, and a male to male -10AN connector to complete the installation. Keep your RX-8 protected and running smooth! As with all our products, these RX-8 oil cooler lines include the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2004–2011 Mazda RX-8\u003cbr\u003ePremade braided stainless steel oil lines and aluminum fittings replace corrosion-prone stock rubber lines\u003cbr\u003eFull kit includes four braided stainless steel oil lines, M18 banjo bolts, and all the necessary fittings and oil seals for a trouble-free installation\u003cbr\u003eOil lines come prelabeled for easy identification\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Stainless Steel\u003cbr\u003eMax Recommended PSI 750psi\u003cbr\u003eMin Temp -40°F\u003cbr\u003eNote This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eMax Temp +300°F\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 13B-MSP (Renesis)\u003cbr\u003eChassis Codes SE3P\u003cbr\u003eCaution This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) 2ft, 4in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(1) 4ft, 8in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 4in Stainless Steel Braided Hose with 45 Degree and Straight -10AN Fittings\u003cbr\u003e(1) 2ft, 2in Stainless Steel Braided Hose with 90 Degree and Straight -10AN Fittings\u003cbr\u003e(4) M18 x -10AN Fittings w\/ Dowty Oil Seals\u003cbr\u003e(2) M18 x -10AN Banjo Bolts w\/ Dowty Oil Seals\u003cbr\u003e(1) 10AN – 10AN Male Connector\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mazda RX-8 has a high-winding rotary engine capable of easily reaching 9,000 RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX-8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine’s oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber oil lines and steel fittings can severely corrode and degrade over time. \u003cbr\u003e\u003cbr\u003eThis full kit from Mishimoto replaces all the RX-8 oil cooler lines with braided stainless units and aluminum fittings that will not corrode or degrade over time. This oil line kit also replaces the most frequent line to corrode, which is located on the left hand side of the car near the front suspension assembly. With Mishimoto replacement Mazda RX-8 oil cooler lines, all oil lines between the engine and both oil coolers are replaced, including the intermediate line that spans both oil coolers found in all manual transmission models. \u003cbr\u003e\u003cbr\u003eThese Mazda RX-8 oil cooler lines fit onto the vehicle with no additional modification, and d not require any cutting to your vehicle or permanent removal of parts. This oil line kit comes with all banjo bolts, M18 fittings, and a male to male -10AN connector to complete the installation. Keep your RX-8 protected and running smooth! As with all our products, these RX-8 oil cooler lines include the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561992204315,"title":"Mishimoto - Mazda RX8 Primary Replacement Oil Line - SE3P - MMSBH-RX8-04","handle":"mishimoto-mazda-rx8-primary-replacement-oil-line-se3p-mmsbh-rx8-04","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMSBH-RX8-04\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct-fit replacement for the 2004–2011 Mazda RX-8\u003cbr\u003ePremade braided stainless steel oil line and aluminum fittings replace corrosion-prone stock rubber line\u003cbr\u003eKit comes with the braided stainless steel line, M18 banjo bolts, and oil seals for a trouble-free installation\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Stainless Steel\u003cbr\u003eMax Recommended PSI 750psi\u003cbr\u003eMin Temp -40°F\u003cbr\u003eNote This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eMax Temp +300°F\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 13B-MSP (Renesis)\u003cbr\u003eChassis Codes SE3P\u003cbr\u003eCaution This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) 2ft, 4in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(2) M18 x -10AN Banjo Bolts w\/ Dowty Oil Seals\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mazda RX-8 has a high-winding rotary engine capable of easily reaching 9,000 RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX-8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine’s oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber RX-8 oil cooler lines and steel fittings can severely corrode and degrade over time. The most frequent RX-8 oil cooler line to corrode is located on the left hand side of the car near the front suspension assembly. The design of the vehicle and location of the line are apt to collect dirt and road salt from winter. With the Mishimoto replacement oil line, not only is this problematic line replaced, it’s replaced with a full braided stainless steel oil line and aluminum M18 to 10AN banjo fittings that will not corrode or break down over time. The Mazda RX-8 oil cooler line fits onto the vehicle with no additional modification, and does not require any cutting to your vehicle or permanent removal of parts. Keep your RX-8 protected and running smooth! As with all our products, this RX-8 oil cooler line includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct-fit replacement for the 2004–2011 Mazda RX-8\u003cbr\u003ePremade braided stainless steel oil line and aluminum fittings replace corrosion-prone stock rubber line\u003cbr\u003eKit comes with the braided stainless steel line, M18 banjo bolts, and oil seals for a trouble-free installation\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Stainless Steel\u003cbr\u003eMax Recommended PSI 750psi\u003cbr\u003eMin Temp -40°F\u003cbr\u003eNote This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eMax Temp +300°F\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 13B-MSP (Renesis)\u003cbr\u003eChassis Codes SE3P\u003cbr\u003eCaution This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) 2ft, 4in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(2) M18 x -10AN Banjo Bolts w\/ Dowty Oil Seals\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mazda RX-8 has a high-winding rotary engine capable of easily reaching 9,000 RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX-8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine’s oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber RX-8 oil cooler lines and steel fittings can severely corrode and degrade over time. The most frequent RX-8 oil cooler line to corrode is located on the left hand side of the car near the front suspension assembly. The design of the vehicle and location of the line are apt to collect dirt and road salt from winter. With the Mishimoto replacement oil line, not only is this problematic line replaced, it’s replaced with a full braided stainless steel oil line and aluminum M18 to 10AN banjo fittings that will not corrode or break down over time. The Mazda RX-8 oil cooler line fits onto the vehicle with no additional modification, and does not require any cutting to your vehicle or permanent removal of parts. Keep your RX-8 protected and running smooth! As with all our products, this RX-8 oil cooler line includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:25:13+08:00","created_at":"2018-01-24T23:25:14+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","car-specific","cooling","mazda","mishimoto","oil-cooler-hoses","oil-coolers","rx-8-se3p-kouki-2008-2013-na-13b-msp-r","rx-8-se3p-zenki-2003-2008-na-13b-msp-r","us1","ws122"],"price":23088,"price_min":23088,"price_max":23088,"available":true,"price_varies":false,"compare_at_price":29600,"compare_at_price_min":29600,"compare_at_price_max":29600,"compare_at_price_varies":false,"variants":[{"id":5990391185435,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMSBH-RX8-04","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Mazda RX8 Primary Replacement Oil Line - SE3P - MMSBH-RX8-04","public_title":null,"options":["Default Title"],"price":23088,"weight":5134,"compare_at_price":29600,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMSBH-RX8-04.jpg?v=1710154111"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMSBH-RX8-04.jpg?v=1710154111","options":["Title"],"media":[{"alt":"Mishimoto - Mazda RX8 Primary Replacement Oil Line - SE3P - MMSBH-RX8-04 - Rzcrewgarage","id":1351401734241,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMSBH-RX8-04.jpg?v=1710154111"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMSBH-RX8-04.jpg?v=1710154111","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMSBH-RX8-04\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct-fit replacement for the 2004–2011 Mazda RX-8\u003cbr\u003ePremade braided stainless steel oil line and aluminum fittings replace corrosion-prone stock rubber line\u003cbr\u003eKit comes with the braided stainless steel line, M18 banjo bolts, and oil seals for a trouble-free installation\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Stainless Steel\u003cbr\u003eMax Recommended PSI 750psi\u003cbr\u003eMin Temp -40°F\u003cbr\u003eNote This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eMax Temp +300°F\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 13B-MSP (Renesis)\u003cbr\u003eChassis Codes SE3P\u003cbr\u003eCaution This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) 2ft, 4in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(2) M18 x -10AN Banjo Bolts w\/ Dowty Oil Seals\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mazda RX-8 has a high-winding rotary engine capable of easily reaching 9,000 RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX-8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine’s oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber RX-8 oil cooler lines and steel fittings can severely corrode and degrade over time. The most frequent RX-8 oil cooler line to corrode is located on the left hand side of the car near the front suspension assembly. The design of the vehicle and location of the line are apt to collect dirt and road salt from winter. With the Mishimoto replacement oil line, not only is this problematic line replaced, it’s replaced with a full braided stainless steel oil line and aluminum M18 to 10AN banjo fittings that will not corrode or break down over time. The Mazda RX-8 oil cooler line fits onto the vehicle with no additional modification, and does not require any cutting to your vehicle or permanent removal of parts. Keep your RX-8 protected and running smooth! As with all our products, this RX-8 oil cooler line includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct-fit replacement for the 2004–2011 Mazda RX-8\u003cbr\u003ePremade braided stainless steel oil line and aluminum fittings replace corrosion-prone stock rubber line\u003cbr\u003eKit comes with the braided stainless steel line, M18 banjo bolts, and oil seals for a trouble-free installation\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Stainless Steel\u003cbr\u003eMax Recommended PSI 750psi\u003cbr\u003eMin Temp -40°F\u003cbr\u003eNote This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eMax Temp +300°F\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 13B-MSP (Renesis)\u003cbr\u003eChassis Codes SE3P\u003cbr\u003eCaution This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) 2ft, 4in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(2) M18 x -10AN Banjo Bolts w\/ Dowty Oil Seals\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mazda RX-8 has a high-winding rotary engine capable of easily reaching 9,000 RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX-8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine’s oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber RX-8 oil cooler lines and steel fittings can severely corrode and degrade over time. The most frequent RX-8 oil cooler line to corrode is located on the left hand side of the car near the front suspension assembly. The design of the vehicle and location of the line are apt to collect dirt and road salt from winter. With the Mishimoto replacement oil line, not only is this problematic line replaced, it’s replaced with a full braided stainless steel oil line and aluminum M18 to 10AN banjo fittings that will not corrode or break down over time. The Mazda RX-8 oil cooler line fits onto the vehicle with no additional modification, and does not require any cutting to your vehicle or permanent removal of parts. Keep your RX-8 protected and running smooth! As with all our products, this RX-8 oil cooler line includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":562001182747,"title":"Mishimoto - Mazdaspeed3 Silicone Radiator Hose Kit - Black - BK3P(Ms) - MMHOSE-MS3-07BK","handle":"mishimoto-mazdaspeed3-silicone-radiator-hose-kit-black-bk3pms-mmhose-ms3-07bk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-MS3-07BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2007–2009 Mazdaspeed3\u003cbr\u003eConstructed from five layers of silicone with heat-resistant embedded fibers\u003cbr\u003eImproves heat and pressure tolerance\u003cbr\u003eIncludes upper radiator hose, lower radiator hose, and expansion tank hose\u003cbr\u003eIncludes high-quality worm-gear clamps for ease of installation\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Silicone Hoses\u003cbr\u003e(6) Worm-Gear Clamps\u003cbr\u003e\u003cbr\u003eNote 22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M).\u003cbr\u003e\u003cbr\u003eAlso Fits 2007–2009 Mazdaspeed3\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 1.65\" \u003cbr\u003eHose 2: 1.65\" \u0026amp; 1.65\" \u0026amp; 1.18\" \u003cbr\u003eHose 3: .71\" \u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 1.26\" \u003cbr\u003eHose 2: 1.26\" \u0026amp; 1.26\" \u0026amp; .79\" \u003cbr\u003eHose 3: .31\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eRubber is out, silicone is in! Upgrade your Mazdaspeed 3 radiator hoses with the Mishimoto 2007–09 Mazdaspeed 3 radiator hose kit to provide your Mazdaspeed 3 with an advancement in both style and reliability. This Mazdaspeed 3 radiator hose kit includes the upper radiator hose, lower radiator hose, expansion tank hose, as well as six worm-gear clamps for ease of installation. Unlike the degradation-prone rubber hoses your Mazdaspeed 3 currently has, every Mishimoto silicone Mazdaspeed 3 radiator hose is constructed from five layers of silicone with heat-resistant embedded fibers to provide unmatched durability, heat tolerance, and pressure tolerance. Whether you are taking your Mazdaspeed 3 to the local autocross or lapping at your next track day, trust Mishimoto with all your Mazdaspee d3 parts. This silicone hose kit is available in black, blue, or red and, like all our Mazdaspeed 3 parts, includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2007–2009 Mazdaspeed3\u003cbr\u003eConstructed from five layers of silicone with heat-resistant embedded fibers\u003cbr\u003eImproves heat and pressure tolerance\u003cbr\u003eIncludes upper radiator hose, lower radiator hose, and expansion tank hose\u003cbr\u003eIncludes high-quality worm-gear clamps for ease of installation\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Silicone Hoses\u003cbr\u003e(6) Worm-Gear Clamps\u003cbr\u003e\u003cbr\u003eNote 22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M).\u003cbr\u003e\u003cbr\u003eAlso Fits 2007–2009 Mazdaspeed3\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 1.65\" \u003cbr\u003eHose 2: 1.65\" \u0026amp; 1.65\" \u0026amp; 1.18\" \u003cbr\u003eHose 3: .71\" \u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 1.26\" \u003cbr\u003eHose 2: 1.26\" \u0026amp; 1.26\" \u0026amp; .79\" \u003cbr\u003eHose 3: .31\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eRubber is out, silicone is in! Upgrade your Mazdaspeed 3 radiator hoses with the Mishimoto 2007–09 Mazdaspeed 3 radiator hose kit to provide your Mazdaspeed 3 with an advancement in both style and reliability. This Mazdaspeed 3 radiator hose kit includes the upper radiator hose, lower radiator hose, expansion tank hose, as well as six worm-gear clamps for ease of installation. Unlike the degradation-prone rubber hoses your Mazdaspeed 3 currently has, every Mishimoto silicone Mazdaspeed 3 radiator hose is constructed from five layers of silicone with heat-resistant embedded fibers to provide unmatched durability, heat tolerance, and pressure tolerance. Whether you are taking your Mazdaspeed 3 to the local autocross or lapping at your next track day, trust Mishimoto with all your Mazdaspee d3 parts. This silicone hose kit is available in black, blue, or red and, like all our Mazdaspeed 3 parts, includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:26:48+08:00","created_at":"2018-01-24T23:26:48+08:00","vendor":"Mishimoto","type":"Cooling Hoses","tags":["2006","2007","2008","2009","3-axela-mazdaspeed-bk3p-2006-2009-tc-l3-vdt-i4","cooling","cooling-hoses","mazda","mishimoto","radiator-hose-kits","us1","ws136"],"price":33792,"price_min":33792,"price_max":33792,"available":true,"price_varies":false,"compare_at_price":52800,"compare_at_price_min":52800,"compare_at_price_max":52800,"compare_at_price_varies":false,"variants":[{"id":5990400720923,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-MS3-07BK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Mazdaspeed3 Silicone Radiator Hose Kit - Black - BK3P(Ms) - MMHOSE-MS3-07BK","public_title":null,"options":["Default Title"],"price":33792,"weight":5542,"compare_at_price":52800,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-MS3-07BK.jpg?v=1710154181"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-MS3-07BK.jpg?v=1710154181","options":["Title"],"media":[{"alt":"Mishimoto - Mazdaspeed3 Silicone Radiator Hose Kit - Black - BK3P(Ms) - MMHOSE-MS3-07BK - Rzcrewgarage","id":1351405731937,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-MS3-07BK.jpg?v=1710154181"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-MS3-07BK.jpg?v=1710154181","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-MS3-07BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2007–2009 Mazdaspeed3\u003cbr\u003eConstructed from five layers of silicone with heat-resistant embedded fibers\u003cbr\u003eImproves heat and pressure tolerance\u003cbr\u003eIncludes upper radiator hose, lower radiator hose, and expansion tank hose\u003cbr\u003eIncludes high-quality worm-gear clamps for ease of installation\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Silicone Hoses\u003cbr\u003e(6) Worm-Gear Clamps\u003cbr\u003e\u003cbr\u003eNote 22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M).\u003cbr\u003e\u003cbr\u003eAlso Fits 2007–2009 Mazdaspeed3\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 1.65\" \u003cbr\u003eHose 2: 1.65\" \u0026amp; 1.65\" \u0026amp; 1.18\" \u003cbr\u003eHose 3: .71\" \u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 1.26\" \u003cbr\u003eHose 2: 1.26\" \u0026amp; 1.26\" \u0026amp; .79\" \u003cbr\u003eHose 3: .31\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eRubber is out, silicone is in! Upgrade your Mazdaspeed 3 radiator hoses with the Mishimoto 2007–09 Mazdaspeed 3 radiator hose kit to provide your Mazdaspeed 3 with an advancement in both style and reliability. This Mazdaspeed 3 radiator hose kit includes the upper radiator hose, lower radiator hose, expansion tank hose, as well as six worm-gear clamps for ease of installation. Unlike the degradation-prone rubber hoses your Mazdaspeed 3 currently has, every Mishimoto silicone Mazdaspeed 3 radiator hose is constructed from five layers of silicone with heat-resistant embedded fibers to provide unmatched durability, heat tolerance, and pressure tolerance. Whether you are taking your Mazdaspeed 3 to the local autocross or lapping at your next track day, trust Mishimoto with all your Mazdaspee d3 parts. This silicone hose kit is available in black, blue, or red and, like all our Mazdaspeed 3 parts, includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2007–2009 Mazdaspeed3\u003cbr\u003eConstructed from five layers of silicone with heat-resistant embedded fibers\u003cbr\u003eImproves heat and pressure tolerance\u003cbr\u003eIncludes upper radiator hose, lower radiator hose, and expansion tank hose\u003cbr\u003eIncludes high-quality worm-gear clamps for ease of installation\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Silicone Hoses\u003cbr\u003e(6) Worm-Gear Clamps\u003cbr\u003e\u003cbr\u003eNote 22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M).\u003cbr\u003e\u003cbr\u003eAlso Fits 2007–2009 Mazdaspeed3\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 1.65\" \u003cbr\u003eHose 2: 1.65\" \u0026amp; 1.65\" \u0026amp; 1.18\" \u003cbr\u003eHose 3: .71\" \u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 1.26\" \u003cbr\u003eHose 2: 1.26\" \u0026amp; 1.26\" \u0026amp; .79\" \u003cbr\u003eHose 3: .31\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eRubber is out, silicone is in! Upgrade your Mazdaspeed 3 radiator hoses with the Mishimoto 2007–09 Mazdaspeed 3 radiator hose kit to provide your Mazdaspeed 3 with an advancement in both style and reliability. This Mazdaspeed 3 radiator hose kit includes the upper radiator hose, lower radiator hose, expansion tank hose, as well as six worm-gear clamps for ease of installation. Unlike the degradation-prone rubber hoses your Mazdaspeed 3 currently has, every Mishimoto silicone Mazdaspeed 3 radiator hose is constructed from five layers of silicone with heat-resistant embedded fibers to provide unmatched durability, heat tolerance, and pressure tolerance. Whether you are taking your Mazdaspeed 3 to the local autocross or lapping at your next track day, trust Mishimoto with all your Mazdaspee d3 parts. This silicone hose kit is available in black, blue, or red and, like all our Mazdaspeed 3 parts, includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":562001215515,"title":"Mishimoto - Mazdaspeed3 Silicone Radiator Hose Kit - Blue - BK3P(Ms) - MMHOSE-MS3-07BL","handle":"mishimoto-mazdaspeed3-silicone-radiator-hose-kit-blue-bk3pms-mmhose-ms3-07bl","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-MS3-07BL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2007–2009 Mazdaspeed3\u003cbr\u003eConstructed from five layers of silicone with heat-resistant embedded fibers\u003cbr\u003eImproves heat and pressure tolerance\u003cbr\u003eIncludes upper radiator hose, lower radiator hose, and expansion tank hose\u003cbr\u003eIncludes high-quality worm-gear clamps for ease of installation\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Silicone Hoses\u003cbr\u003e(6) Worm-Gear Clamps\u003cbr\u003e\u003cbr\u003eNote 22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M).\u003cbr\u003e\u003cbr\u003eAlso Fits 2007–2009 Mazdaspeed3\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 1.65\" \u003cbr\u003eHose 2: 1.65\" \u0026amp; 1.65\" \u0026amp; 1.18\" \u003cbr\u003eHose 3: .71\" \u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 1.26\" \u003cbr\u003eHose 2: 1.26\" \u0026amp; 1.26\" \u0026amp; .79\" \u003cbr\u003eHose 3: .31\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eRubber is out, silicone is in! Upgrade your Mazdaspeed 3 radiator hoses with the Mishimoto 2007–09 Mazdaspeed 3 radiator hose kit to provide your Mazdaspeed 3 with an advancement in both style and reliability. This Mazdaspeed 3 radiator hose kit includes the upper radiator hose, lower radiator hose, expansion tank hose, as well as six worm-gear clamps for ease of installation. Unlike the degradation-prone rubber hoses your Mazdaspeed 3 currently has, every Mishimoto silicone Mazdaspeed 3 radiator hose is constructed from five layers of silicone with heat-resistant embedded fibers to provide unmatched durability, heat tolerance, and pressure tolerance. Whether you are taking your Mazdaspeed 3 to the local autocross or lapping at your next track day, trust Mishimoto with all your Mazdaspee d3 parts. This silicone hose kit is available in black, blue, or red and, like all our Mazdaspeed 3 parts, includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2007–2009 Mazdaspeed3\u003cbr\u003eConstructed from five layers of silicone with heat-resistant embedded fibers\u003cbr\u003eImproves heat and pressure tolerance\u003cbr\u003eIncludes upper radiator hose, lower radiator hose, and expansion tank hose\u003cbr\u003eIncludes high-quality worm-gear clamps for ease of installation\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Silicone Hoses\u003cbr\u003e(6) Worm-Gear Clamps\u003cbr\u003e\u003cbr\u003eNote 22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M).\u003cbr\u003e\u003cbr\u003eAlso Fits 2007–2009 Mazdaspeed3\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 1.65\" \u003cbr\u003eHose 2: 1.65\" \u0026amp; 1.65\" \u0026amp; 1.18\" \u003cbr\u003eHose 3: .71\" \u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 1.26\" \u003cbr\u003eHose 2: 1.26\" \u0026amp; 1.26\" \u0026amp; .79\" \u003cbr\u003eHose 3: .31\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eRubber is out, silicone is in! Upgrade your Mazdaspeed 3 radiator hoses with the Mishimoto 2007–09 Mazdaspeed 3 radiator hose kit to provide your Mazdaspeed 3 with an advancement in both style and reliability. This Mazdaspeed 3 radiator hose kit includes the upper radiator hose, lower radiator hose, expansion tank hose, as well as six worm-gear clamps for ease of installation. Unlike the degradation-prone rubber hoses your Mazdaspeed 3 currently has, every Mishimoto silicone Mazdaspeed 3 radiator hose is constructed from five layers of silicone with heat-resistant embedded fibers to provide unmatched durability, heat tolerance, and pressure tolerance. Whether you are taking your Mazdaspeed 3 to the local autocross or lapping at your next track day, trust Mishimoto with all your Mazdaspee d3 parts. This silicone hose kit is available in black, blue, or red and, like all our Mazdaspeed 3 parts, includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 1 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:26:48+08:00","created_at":"2018-01-24T23:26:49+08:00","vendor":"Mishimoto","type":"Cooling Hoses","tags":["2006","2007","2008","2009","3-axela-mazdaspeed-bk3p-2006-2009-tc-l3-vdt-i4","cooling","cooling-hoses","mazda","mishimoto","radiator-hose-kits","us1","ws136"],"price":33792,"price_min":33792,"price_max":33792,"available":true,"price_varies":false,"compare_at_price":52800,"compare_at_price_min":52800,"compare_at_price_max":52800,"compare_at_price_varies":false,"variants":[{"id":5990400753691,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-MS3-07BL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Mazdaspeed3 Silicone Radiator Hose Kit - Blue - BK3P(Ms) - MMHOSE-MS3-07BL","public_title":null,"options":["Default Title"],"price":33792,"weight":5588,"compare_at_price":52800,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-MS3-07BL.jpg?v=1710154184"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-MS3-07BL.jpg?v=1710154184","options":["Title"],"media":[{"alt":"Mishimoto - Mazdaspeed3 Silicone Radiator Hose Kit - Blue - BK3P(Ms) - MMHOSE-MS3-07BL - Rzcrewgarage","id":1351405764705,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-MS3-07BL.jpg?v=1710154184"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-MS3-07BL.jpg?v=1710154184","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-MS3-07BL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2007–2009 Mazdaspeed3\u003cbr\u003eConstructed from five layers of silicone with heat-resistant embedded fibers\u003cbr\u003eImproves heat and pressure tolerance\u003cbr\u003eIncludes upper radiator hose, lower radiator hose, and expansion tank hose\u003cbr\u003eIncludes high-quality worm-gear clamps for ease of installation\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Silicone Hoses\u003cbr\u003e(6) Worm-Gear Clamps\u003cbr\u003e\u003cbr\u003eNote 22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M).\u003cbr\u003e\u003cbr\u003eAlso Fits 2007–2009 Mazdaspeed3\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 1.65\" \u003cbr\u003eHose 2: 1.65\" \u0026amp; 1.65\" \u0026amp; 1.18\" \u003cbr\u003eHose 3: .71\" \u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 1.26\" \u003cbr\u003eHose 2: 1.26\" \u0026amp; 1.26\" \u0026amp; .79\" \u003cbr\u003eHose 3: .31\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eRubber is out, silicone is in! Upgrade your Mazdaspeed 3 radiator hoses with the Mishimoto 2007–09 Mazdaspeed 3 radiator hose kit to provide your Mazdaspeed 3 with an advancement in both style and reliability. This Mazdaspeed 3 radiator hose kit includes the upper radiator hose, lower radiator hose, expansion tank hose, as well as six worm-gear clamps for ease of installation. Unlike the degradation-prone rubber hoses your Mazdaspeed 3 currently has, every Mishimoto silicone Mazdaspeed 3 radiator hose is constructed from five layers of silicone with heat-resistant embedded fibers to provide unmatched durability, heat tolerance, and pressure tolerance. Whether you are taking your Mazdaspeed 3 to the local autocross or lapping at your next track day, trust Mishimoto with all your Mazdaspee d3 parts. This silicone hose kit is available in black, blue, or red and, like all our Mazdaspeed 3 parts, includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2007–2009 Mazdaspeed3\u003cbr\u003eConstructed from five layers of silicone with heat-resistant embedded fibers\u003cbr\u003eImproves heat and pressure tolerance\u003cbr\u003eIncludes upper radiator hose, lower radiator hose, and expansion tank hose\u003cbr\u003eIncludes high-quality worm-gear clamps for ease of installation\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Silicone Hoses\u003cbr\u003e(6) Worm-Gear Clamps\u003cbr\u003e\u003cbr\u003eNote 22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M).\u003cbr\u003e\u003cbr\u003eAlso Fits 2007–2009 Mazdaspeed3\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 1.65\" \u003cbr\u003eHose 2: 1.65\" \u0026amp; 1.65\" \u0026amp; 1.18\" \u003cbr\u003eHose 3: .71\" \u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 1.26\" \u003cbr\u003eHose 2: 1.26\" \u0026amp; 1.26\" \u0026amp; .79\" \u003cbr\u003eHose 3: .31\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eRubber is out, silicone is in! Upgrade your Mazdaspeed 3 radiator hoses with the Mishimoto 2007–09 Mazdaspeed 3 radiator hose kit to provide your Mazdaspeed 3 with an advancement in both style and reliability. This Mazdaspeed 3 radiator hose kit includes the upper radiator hose, lower radiator hose, expansion tank hose, as well as six worm-gear clamps for ease of installation. Unlike the degradation-prone rubber hoses your Mazdaspeed 3 currently has, every Mishimoto silicone Mazdaspeed 3 radiator hose is constructed from five layers of silicone with heat-resistant embedded fibers to provide unmatched durability, heat tolerance, and pressure tolerance. Whether you are taking your Mazdaspeed 3 to the local autocross or lapping at your next track day, trust Mishimoto with all your Mazdaspee d3 parts. This silicone hose kit is available in black, blue, or red and, like all our Mazdaspeed 3 parts, includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 1 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":562001248283,"title":"Mishimoto - Mazdaspeed3 Silicone Radiator Hose Kit - Red - BK3P(Ms) - MMHOSE-MS3-07RD","handle":"mishimoto-mazdaspeed3-silicone-radiator-hose-kit-red-bk3pms-mmhose-ms3-07rd","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-MS3-07RD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2007–2009 Mazdaspeed3\u003cbr\u003eConstructed from five layers of silicone with heat-resistant embedded fibers\u003cbr\u003eImproves heat and pressure tolerance\u003cbr\u003eIncludes upper radiator hose, lower radiator hose, and expansion tank hose\u003cbr\u003eIncludes high-quality worm-gear clamps for ease of installation\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Silicone Hoses\u003cbr\u003e(6) Worm-Gear Clamps\u003cbr\u003e\u003cbr\u003eNote 22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M).\u003cbr\u003e\u003cbr\u003eAlso Fits 2007–2009 Mazdaspeed3\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 1.65\" \u003cbr\u003eHose 2: 1.65\" \u0026amp; 1.65\" \u0026amp; 1.18\" \u003cbr\u003eHose 3: .71\" \u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 1.26\" \u003cbr\u003eHose 2: 1.26\" \u0026amp; 1.26\" \u0026amp; .79\" \u003cbr\u003eHose 3: .31\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eRubber is out, silicone is in! Upgrade your Mazdaspeed 3 radiator hoses with the Mishimoto 2007–09 Mazdaspeed 3 radiator hose kit to provide your Mazdaspeed 3 with an advancement in both style and reliability. This Mazdaspeed 3 radiator hose kit includes the upper radiator hose, lower radiator hose, expansion tank hose, as well as six worm-gear clamps for ease of installation. Unlike the degradation-prone rubber hoses your Mazdaspeed 3 currently has, every Mishimoto silicone Mazdaspeed 3 radiator hose is constructed from five layers of silicone with heat-resistant embedded fibers to provide unmatched durability, heat tolerance, and pressure tolerance. Whether you are taking your Mazdaspeed 3 to the local autocross or lapping at your next track day, trust Mishimoto with all your Mazdaspee d3 parts. This silicone hose kit is available in black, blue, or red and, like all our Mazdaspeed 3 parts, includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2007–2009 Mazdaspeed3\u003cbr\u003eConstructed from five layers of silicone with heat-resistant embedded fibers\u003cbr\u003eImproves heat and pressure tolerance\u003cbr\u003eIncludes upper radiator hose, lower radiator hose, and expansion tank hose\u003cbr\u003eIncludes high-quality worm-gear clamps for ease of installation\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Silicone Hoses\u003cbr\u003e(6) Worm-Gear Clamps\u003cbr\u003e\u003cbr\u003eNote 22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M).\u003cbr\u003e\u003cbr\u003eAlso Fits 2007–2009 Mazdaspeed3\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 1.65\" \u003cbr\u003eHose 2: 1.65\" \u0026amp; 1.65\" \u0026amp; 1.18\" \u003cbr\u003eHose 3: .71\" \u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 1.26\" \u003cbr\u003eHose 2: 1.26\" \u0026amp; 1.26\" \u0026amp; .79\" \u003cbr\u003eHose 3: .31\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eRubber is out, silicone is in! Upgrade your Mazdaspeed 3 radiator hoses with the Mishimoto 2007–09 Mazdaspeed 3 radiator hose kit to provide your Mazdaspeed 3 with an advancement in both style and reliability. This Mazdaspeed 3 radiator hose kit includes the upper radiator hose, lower radiator hose, expansion tank hose, as well as six worm-gear clamps for ease of installation. Unlike the degradation-prone rubber hoses your Mazdaspeed 3 currently has, every Mishimoto silicone Mazdaspeed 3 radiator hose is constructed from five layers of silicone with heat-resistant embedded fibers to provide unmatched durability, heat tolerance, and pressure tolerance. Whether you are taking your Mazdaspeed 3 to the local autocross or lapping at your next track day, trust Mishimoto with all your Mazdaspee d3 parts. This silicone hose kit is available in black, blue, or red and, like all our Mazdaspeed 3 parts, includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:26:49+08:00","created_at":"2018-01-24T23:26:50+08:00","vendor":"Mishimoto","type":"Cooling Hoses","tags":["2006","2007","2008","2009","3-axela-mazdaspeed-bk3p-2006-2009-tc-l3-vdt-i4","cooling","cooling-hoses","mazda","mishimoto","radiator-hose-kits","us1","ws136"],"price":33792,"price_min":33792,"price_max":33792,"available":true,"price_varies":false,"compare_at_price":52800,"compare_at_price_min":52800,"compare_at_price_max":52800,"compare_at_price_varies":false,"variants":[{"id":5990400786459,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-MS3-07RD","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Mazdaspeed3 Silicone Radiator Hose Kit - Red - BK3P(Ms) - MMHOSE-MS3-07RD","public_title":null,"options":["Default Title"],"price":33792,"weight":5542,"compare_at_price":52800,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-MS3-07RD.jpg?v=1710154184"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-MS3-07RD.jpg?v=1710154184","options":["Title"],"media":[{"alt":"Mishimoto - Mazdaspeed3 Silicone Radiator Hose Kit - Red - BK3P(Ms) - MMHOSE-MS3-07RD - Rzcrewgarage","id":1351405797473,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-MS3-07RD.jpg?v=1710154184"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-MS3-07RD.jpg?v=1710154184","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-MS3-07RD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2007–2009 Mazdaspeed3\u003cbr\u003eConstructed from five layers of silicone with heat-resistant embedded fibers\u003cbr\u003eImproves heat and pressure tolerance\u003cbr\u003eIncludes upper radiator hose, lower radiator hose, and expansion tank hose\u003cbr\u003eIncludes high-quality worm-gear clamps for ease of installation\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Silicone Hoses\u003cbr\u003e(6) Worm-Gear Clamps\u003cbr\u003e\u003cbr\u003eNote 22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M).\u003cbr\u003e\u003cbr\u003eAlso Fits 2007–2009 Mazdaspeed3\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 1.65\" \u003cbr\u003eHose 2: 1.65\" \u0026amp; 1.65\" \u0026amp; 1.18\" \u003cbr\u003eHose 3: .71\" \u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 1.26\" \u003cbr\u003eHose 2: 1.26\" \u0026amp; 1.26\" \u0026amp; .79\" \u003cbr\u003eHose 3: .31\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eRubber is out, silicone is in! Upgrade your Mazdaspeed 3 radiator hoses with the Mishimoto 2007–09 Mazdaspeed 3 radiator hose kit to provide your Mazdaspeed 3 with an advancement in both style and reliability. This Mazdaspeed 3 radiator hose kit includes the upper radiator hose, lower radiator hose, expansion tank hose, as well as six worm-gear clamps for ease of installation. Unlike the degradation-prone rubber hoses your Mazdaspeed 3 currently has, every Mishimoto silicone Mazdaspeed 3 radiator hose is constructed from five layers of silicone with heat-resistant embedded fibers to provide unmatched durability, heat tolerance, and pressure tolerance. Whether you are taking your Mazdaspeed 3 to the local autocross or lapping at your next track day, trust Mishimoto with all your Mazdaspee d3 parts. This silicone hose kit is available in black, blue, or red and, like all our Mazdaspeed 3 parts, includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2007–2009 Mazdaspeed3\u003cbr\u003eConstructed from five layers of silicone with heat-resistant embedded fibers\u003cbr\u003eImproves heat and pressure tolerance\u003cbr\u003eIncludes upper radiator hose, lower radiator hose, and expansion tank hose\u003cbr\u003eIncludes high-quality worm-gear clamps for ease of installation\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Silicone Hoses\u003cbr\u003e(6) Worm-Gear Clamps\u003cbr\u003e\u003cbr\u003eNote 22 in-lbs (2.5N*M) recommended for all worm-gear clamps.\u003cbr\u003eThese clamps have an operating range of 18-27 in-lbs 2-3N*M.\u003cbr\u003eDo not exceed the maximum torque rating of 27 in-lbs (3N*M).\u003cbr\u003e\u003cbr\u003eAlso Fits 2007–2009 Mazdaspeed3\u003cbr\u003eMax Temp 330°F\u003cbr\u003eOuter Diameter \u003cbr\u003eHose 1: 1.65\" \u003cbr\u003eHose 2: 1.65\" \u0026amp; 1.65\" \u0026amp; 1.18\" \u003cbr\u003eHose 3: .71\" \u003cbr\u003eInner Diameter \u003cbr\u003eHose 1: 1.26\" \u003cbr\u003eHose 2: 1.26\" \u0026amp; 1.26\" \u0026amp; .79\" \u003cbr\u003eHose 3: .31\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eRubber is out, silicone is in! Upgrade your Mazdaspeed 3 radiator hoses with the Mishimoto 2007–09 Mazdaspeed 3 radiator hose kit to provide your Mazdaspeed 3 with an advancement in both style and reliability. This Mazdaspeed 3 radiator hose kit includes the upper radiator hose, lower radiator hose, expansion tank hose, as well as six worm-gear clamps for ease of installation. Unlike the degradation-prone rubber hoses your Mazdaspeed 3 currently has, every Mishimoto silicone Mazdaspeed 3 radiator hose is constructed from five layers of silicone with heat-resistant embedded fibers to provide unmatched durability, heat tolerance, and pressure tolerance. Whether you are taking your Mazdaspeed 3 to the local autocross or lapping at your next track day, trust Mishimoto with all your Mazdaspee d3 parts. This silicone hose kit is available in black, blue, or red and, like all our Mazdaspeed 3 parts, includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561992040475,"title":"Mishimoto - Mishimoto BMW E36 E46 Oil Line Fitting Kit - E36 E46 - MMOCF-BMW","handle":"mishimoto-mishimoto-bmw-e36-e46-oil-line-fitting-kit-e36-e46-mmocf-bmw","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOCF-BMW\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Allows for use of -10AN fittings for custom\u003cbr\u003e100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate\u003cbr\u003eIncludes durable stock\u003cbr\u003eBMW O-rings for leak-free installation\u003cbr\u003eProvides additional engine bay space for applications with an oil accumulator or supercharger setup\u003cbr\u003eIncluded as part of the Mishimoto BMW E46 M3 Oil Cooler Kit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial \u003cbr\u003eFITTING CLAMP MATERIAL\u003cbr\u003e303 Stainless Steel\u003cbr\u003e\u003cbr\u003e-10AN FITTINGS MATERIAL\u003cbr\u003e6061 Aluminum\u003cbr\u003e\u003cbr\u003eNote This kit works with vehicles which have stock oil cooler housings.\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes S54, N54, N55\u003cbr\u003eChassis Codes E36, E46\u003cbr\u003eInstall Torque Specs 10 ft\/lbs for Oil Line Fitting Kit bolt\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eOverall Height 1.3\" \u003cbr\u003eOverall Length 2.44\" \u003cbr\u003eOverall Width 1.51\" (assembled) \u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Fitting Clamp \u003cbr\u003e(2) -10AN Fittings \u003cbr\u003e(2) BMW Oil O-rings \u003cbr\u003e(1) M8 x 1.25 x 25mm Button-Head Bolt \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eInstall a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Pair this fitting kit with some Mishimoto stainless steel oil lines and one of our stacked-plate oil coolers to create a complete cooling setup for your BMW. As with all our products, the Mishimoto BMW Oil Line Fitting Kit includes our Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Allows for use of -10AN fittings for custom\u003cbr\u003e100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate\u003cbr\u003eIncludes durable stock\u003cbr\u003eBMW O-rings for leak-free installation\u003cbr\u003eProvides additional engine bay space for applications with an oil accumulator or supercharger setup\u003cbr\u003eIncluded as part of the Mishimoto BMW E46 M3 Oil Cooler Kit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial \u003cbr\u003eFITTING CLAMP MATERIAL\u003cbr\u003e303 Stainless Steel\u003cbr\u003e\u003cbr\u003e-10AN FITTINGS MATERIAL\u003cbr\u003e6061 Aluminum\u003cbr\u003e\u003cbr\u003eNote This kit works with vehicles which have stock oil cooler housings.\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes S54, N54, N55\u003cbr\u003eChassis Codes E36, E46\u003cbr\u003eInstall Torque Specs 10 ft\/lbs for Oil Line Fitting Kit bolt\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eOverall Height 1.3\" \u003cbr\u003eOverall Length 2.44\" \u003cbr\u003eOverall Width 1.51\" (assembled) \u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Fitting Clamp \u003cbr\u003e(2) -10AN Fittings \u003cbr\u003e(2) BMW Oil O-rings \u003cbr\u003e(1) M8 x 1.25 x 25mm Button-Head Bolt \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eInstall a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Pair this fitting kit with some Mishimoto stainless steel oil lines and one of our stacked-plate oil coolers to create a complete cooling setup for your BMW. As with all our products, the Mishimoto BMW Oil Line Fitting Kit includes our Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:25:09+08:00","created_at":"2018-01-24T23:25:09+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["1-series-e82-2007-2013-tc-i6","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","3-series-cabriolet-e93-2004-2011-na-i6","3-series-cabriolet-e93-2007-2013-tc-i6","3-series-coupe-e92-2004-2011-na-i6","3-series-coupe-e92-2007-2013-tc-i6","3-series-e90-2004-2011-na-i6","3-series-e90-2007-2013-tc-i6","bmw","car-specific","cooling","mishimoto","oil-cooler-accessories","oil-coolers","us1","ws122"],"price":10608,"price_min":10608,"price_max":10608,"available":true,"price_varies":false,"compare_at_price":13600,"compare_at_price_min":13600,"compare_at_price_max":13600,"compare_at_price_varies":false,"variants":[{"id":5990389317659,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOCF-BMW","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Mishimoto BMW E36 E46 Oil Line Fitting Kit - E36 E46 - MMOCF-BMW","public_title":null,"options":["Default Title"],"price":10608,"weight":4177,"compare_at_price":13600,"inventory_quantity":17,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOCF-BMW_dc87dcb0-50fa-432d-a3a6-4835b75229d0.jpg?v=1710154108"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOCF-BMW_dc87dcb0-50fa-432d-a3a6-4835b75229d0.jpg?v=1710154108","options":["Title"],"media":[{"alt":"Mishimoto - Mishimoto BMW E36 E46 Oil Line Fitting Kit - E36 E46 - MMOCF-BMW - Rzcrewgarage","id":1351401635937,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOCF-BMW_dc87dcb0-50fa-432d-a3a6-4835b75229d0.jpg?v=1710154108"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOCF-BMW_dc87dcb0-50fa-432d-a3a6-4835b75229d0.jpg?v=1710154108","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOCF-BMW\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Allows for use of -10AN fittings for custom\u003cbr\u003e100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate\u003cbr\u003eIncludes durable stock\u003cbr\u003eBMW O-rings for leak-free installation\u003cbr\u003eProvides additional engine bay space for applications with an oil accumulator or supercharger setup\u003cbr\u003eIncluded as part of the Mishimoto BMW E46 M3 Oil Cooler Kit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial \u003cbr\u003eFITTING CLAMP MATERIAL\u003cbr\u003e303 Stainless Steel\u003cbr\u003e\u003cbr\u003e-10AN FITTINGS MATERIAL\u003cbr\u003e6061 Aluminum\u003cbr\u003e\u003cbr\u003eNote This kit works with vehicles which have stock oil cooler housings.\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes S54, N54, N55\u003cbr\u003eChassis Codes E36, E46\u003cbr\u003eInstall Torque Specs 10 ft\/lbs for Oil Line Fitting Kit bolt\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eOverall Height 1.3\" \u003cbr\u003eOverall Length 2.44\" \u003cbr\u003eOverall Width 1.51\" (assembled) \u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Fitting Clamp \u003cbr\u003e(2) -10AN Fittings \u003cbr\u003e(2) BMW Oil O-rings \u003cbr\u003e(1) M8 x 1.25 x 25mm Button-Head Bolt \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eInstall a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Pair this fitting kit with some Mishimoto stainless steel oil lines and one of our stacked-plate oil coolers to create a complete cooling setup for your BMW. As with all our products, the Mishimoto BMW Oil Line Fitting Kit includes our Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Allows for use of -10AN fittings for custom\u003cbr\u003e100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate\u003cbr\u003eIncludes durable stock\u003cbr\u003eBMW O-rings for leak-free installation\u003cbr\u003eProvides additional engine bay space for applications with an oil accumulator or supercharger setup\u003cbr\u003eIncluded as part of the Mishimoto BMW E46 M3 Oil Cooler Kit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial \u003cbr\u003eFITTING CLAMP MATERIAL\u003cbr\u003e303 Stainless Steel\u003cbr\u003e\u003cbr\u003e-10AN FITTINGS MATERIAL\u003cbr\u003e6061 Aluminum\u003cbr\u003e\u003cbr\u003eNote This kit works with vehicles which have stock oil cooler housings.\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes S54, N54, N55\u003cbr\u003eChassis Codes E36, E46\u003cbr\u003eInstall Torque Specs 10 ft\/lbs for Oil Line Fitting Kit bolt\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eOverall Height 1.3\" \u003cbr\u003eOverall Length 2.44\" \u003cbr\u003eOverall Width 1.51\" (assembled) \u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Fitting Clamp \u003cbr\u003e(2) -10AN Fittings \u003cbr\u003e(2) BMW Oil O-rings \u003cbr\u003e(1) M8 x 1.25 x 25mm Button-Head Bolt \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eInstall a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Pair this fitting kit with some Mishimoto stainless steel oil lines and one of our stacked-plate oil coolers to create a complete cooling setup for your BMW. As with all our products, the Mishimoto BMW Oil Line Fitting Kit includes our Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561990533147,"title":"Mishimoto - Mishimoto BMW E82 E90 E92 E93 Oil Line Fitting Kit - E82 E90 E92 E93 - MMOCF-BMW","handle":"mishimoto-mishimoto-bmw-e82-e90-e92-e93-oil-line-fitting-kit-e82-e90-e92-e93-mmocf-bmw","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOCF-BMW\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Allows for use of -10AN fittings for custom\u003cbr\u003e100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate\u003cbr\u003eIncludes durable stock\u003cbr\u003eBMW O-rings for leak-free installation\u003cbr\u003eProvides additional engine bay space for applications with an oil accumulator or supercharger setup\u003cbr\u003eIncluded as part of the Mishimoto BMW E46 M3 Oil Cooler Kit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial \u003cbr\u003eFITTING CLAMP MATERIAL\u003cbr\u003e303 Stainless Steel\u003cbr\u003e\u003cbr\u003e-10AN FITTINGS MATERIAL\u003cbr\u003e6061 Aluminum\u003cbr\u003e\u003cbr\u003eNote This kit works with vehicles which have stock oil cooler housings.\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes S54, N54, N55\u003cbr\u003eChassis Codes E82, E90, E92, E93\u003cbr\u003eInstall Torque Specs 10 ft\/lbs for Oil Line Fitting Kit bolt\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eOverall Height 1.3\" \u003cbr\u003eOverall Length 2.44\" \u003cbr\u003eOverall Width 1.51\" (assembled) \u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Fitting Clamp \u003cbr\u003e(2) -10AN Fittings \u003cbr\u003e(2) BMW Oil O-rings \u003cbr\u003e(1) M8 x 1.25 x 25mm Button-Head Bolt \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eInstall a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Pair this fitting kit with some Mishimoto stainless steel oil lines and one of our stacked-plate oil coolers to create a complete cooling setup for your BMW. As with all our products, the Mishimoto BMW Oil Line Fitting Kit includes our Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Allows for use of -10AN fittings for custom\u003cbr\u003e100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate\u003cbr\u003eIncludes durable stock\u003cbr\u003eBMW O-rings for leak-free installation\u003cbr\u003eProvides additional engine bay space for applications with an oil accumulator or supercharger setup\u003cbr\u003eIncluded as part of the Mishimoto BMW E46 M3 Oil Cooler Kit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial \u003cbr\u003eFITTING CLAMP MATERIAL\u003cbr\u003e303 Stainless Steel\u003cbr\u003e\u003cbr\u003e-10AN FITTINGS MATERIAL\u003cbr\u003e6061 Aluminum\u003cbr\u003e\u003cbr\u003eNote This kit works with vehicles which have stock oil cooler housings.\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes S54, N54, N55\u003cbr\u003eChassis Codes E82, E90, E92, E93\u003cbr\u003eInstall Torque Specs 10 ft\/lbs for Oil Line Fitting Kit bolt\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eOverall Height 1.3\" \u003cbr\u003eOverall Length 2.44\" \u003cbr\u003eOverall Width 1.51\" (assembled) \u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Fitting Clamp \u003cbr\u003e(2) -10AN Fittings \u003cbr\u003e(2) BMW Oil O-rings \u003cbr\u003e(1) M8 x 1.25 x 25mm Button-Head Bolt \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eInstall a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Pair this fitting kit with some Mishimoto stainless steel oil lines and one of our stacked-plate oil coolers to create a complete cooling setup for your BMW. As with all our products, the Mishimoto BMW Oil Line Fitting Kit includes our Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:53+08:00","created_at":"2018-01-24T23:24:54+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["1-series-e82-2007-2013-tc-i6","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","3-series-cabriolet-e93-2004-2011-na-i6","3-series-cabriolet-e93-2007-2013-tc-i6","3-series-coupe-e92-2004-2011-na-i6","3-series-coupe-e92-2007-2013-tc-i6","3-series-e90-2004-2011-na-i6","3-series-e90-2007-2013-tc-i6","bmw","car-specific","cooling","mishimoto","oil-cooler-accessories","oil-coolers","us1","ws122"],"price":10608,"price_min":10608,"price_max":10608,"available":true,"price_varies":false,"compare_at_price":13600,"compare_at_price_min":13600,"compare_at_price_max":13600,"compare_at_price_varies":false,"variants":[{"id":5990387712027,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOCF-BMW","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Mishimoto BMW E82 E90 E92 E93 Oil Line Fitting Kit - E82 E90 E92 E93 - MMOCF-BMW","public_title":null,"options":["Default Title"],"price":10608,"weight":4177,"compare_at_price":13600,"inventory_quantity":17,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOCF-BMW.jpg?v=1710154097"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOCF-BMW.jpg?v=1710154097","options":["Title"],"media":[{"alt":"Mishimoto - Mishimoto BMW E82 E90 E92 E93 Oil Line Fitting Kit - E82 E90 E92 E93 - MMOCF-BMW - Rzcrewgarage","id":1351401144417,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOCF-BMW.jpg?v=1710154097"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOCF-BMW.jpg?v=1710154097","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOCF-BMW\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Allows for use of -10AN fittings for custom\u003cbr\u003e100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate\u003cbr\u003eIncludes durable stock\u003cbr\u003eBMW O-rings for leak-free installation\u003cbr\u003eProvides additional engine bay space for applications with an oil accumulator or supercharger setup\u003cbr\u003eIncluded as part of the Mishimoto BMW E46 M3 Oil Cooler Kit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial \u003cbr\u003eFITTING CLAMP MATERIAL\u003cbr\u003e303 Stainless Steel\u003cbr\u003e\u003cbr\u003e-10AN FITTINGS MATERIAL\u003cbr\u003e6061 Aluminum\u003cbr\u003e\u003cbr\u003eNote This kit works with vehicles which have stock oil cooler housings.\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes S54, N54, N55\u003cbr\u003eChassis Codes E82, E90, E92, E93\u003cbr\u003eInstall Torque Specs 10 ft\/lbs for Oil Line Fitting Kit bolt\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eOverall Height 1.3\" \u003cbr\u003eOverall Length 2.44\" \u003cbr\u003eOverall Width 1.51\" (assembled) \u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Fitting Clamp \u003cbr\u003e(2) -10AN Fittings \u003cbr\u003e(2) BMW Oil O-rings \u003cbr\u003e(1) M8 x 1.25 x 25mm Button-Head Bolt \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eInstall a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Pair this fitting kit with some Mishimoto stainless steel oil lines and one of our stacked-plate oil coolers to create a complete cooling setup for your BMW. As with all our products, the Mishimoto BMW Oil Line Fitting Kit includes our Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Allows for use of -10AN fittings for custom\u003cbr\u003e100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate\u003cbr\u003eIncludes durable stock\u003cbr\u003eBMW O-rings for leak-free installation\u003cbr\u003eProvides additional engine bay space for applications with an oil accumulator or supercharger setup\u003cbr\u003eIncluded as part of the Mishimoto BMW E46 M3 Oil Cooler Kit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial \u003cbr\u003eFITTING CLAMP MATERIAL\u003cbr\u003e303 Stainless Steel\u003cbr\u003e\u003cbr\u003e-10AN FITTINGS MATERIAL\u003cbr\u003e6061 Aluminum\u003cbr\u003e\u003cbr\u003eNote This kit works with vehicles which have stock oil cooler housings.\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes S54, N54, N55\u003cbr\u003eChassis Codes E82, E90, E92, E93\u003cbr\u003eInstall Torque Specs 10 ft\/lbs for Oil Line Fitting Kit bolt\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eOverall Height 1.3\" \u003cbr\u003eOverall Length 2.44\" \u003cbr\u003eOverall Width 1.51\" (assembled) \u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Fitting Clamp \u003cbr\u003e(2) -10AN Fittings \u003cbr\u003e(2) BMW Oil O-rings \u003cbr\u003e(1) M8 x 1.25 x 25mm Button-Head Bolt \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eInstall a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Pair this fitting kit with some Mishimoto stainless steel oil lines and one of our stacked-plate oil coolers to create a complete cooling setup for your BMW. As with all our products, the Mishimoto BMW Oil Line Fitting Kit includes our Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561998921755,"title":"Mishimoto - Mitsubishi Evolution 10 Silicone BOV Return Hose - Black - CZ4A - MMHOSE-EVO-XBOVBK","handle":"mishimoto-mitsubishi-evolution-10-silicone-bov-return-hose-black-cz4a-mmhose-evo-xbovbk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-EVO-XBOVBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for Mitsubishi Lancer Evolution 10\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(2) T-Bolt Clamps\u003cbr\u003e\u003cbr\u003eOuter Diameter Hose 1: 1.80\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter Hose 1: 1.30\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto introduces the Mitsubishi Evolution X silicone BOV return hose. Created from high grade silicone and heat resistant embedded fibers, this is a direct replacement for your Mitsubishi EVO X and is sure to outlast the stock rubber BOV return hose. Not only will it be more durable than original equipment, it will add a unique touch to your engine bay!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for Mitsubishi Lancer Evolution 10\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(2) T-Bolt Clamps\u003cbr\u003e\u003cbr\u003eOuter Diameter Hose 1: 1.80\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter Hose 1: 1.30\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto introduces the Mitsubishi Evolution X silicone BOV return hose. Created from high grade silicone and heat resistant embedded fibers, this is a direct replacement for your Mitsubishi EVO X and is sure to outlast the stock rubber BOV return hose. Not only will it be more durable than original equipment, it will add a unique touch to your engine bay!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 4 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:26:22+08:00","created_at":"2018-01-24T23:26:23+08:00","vendor":"Mishimoto","type":"F\/I System Hoses","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","bov-return-hoses","f-i-system-hoses","lancer-evolution-x-cz4a-chuki-gsr-jdmmr-2008-2009-tc-4b11-i4","lancer-evolution-x-cz4a-chuki-rs-jdmgsr-2008-2009-tc-4b11-i4","lancer-evolution-x-cz4a-kouki-gsr-jdmmr-2009-2017-tc-4b11-i4","lancer-evolution-x-cz4a-kouki-rs-jdmgsr-2009-2017-tc-4b11-i4","lancer-evolution-x-cz4a-zenki-gsr-jdmmr-2007-2008-tc-4b11-i4","lancer-evolution-x-cz4a-zenki-rs-jdmgsr-2007-2008-tc-4b11-i4","lancer-evolution-x-cz4agsr-jdmmr-2007-2017-tc-4b11-i4","lancer-evolution-x-cz4ars-jdmgsr-2007-2017-tc-4b11-i4","mishimoto","mitsubishi","us1","ws136"],"price":22528,"price_min":22528,"price_max":22528,"available":true,"price_varies":false,"compare_at_price":35200,"compare_at_price_min":35200,"compare_at_price_max":35200,"compare_at_price_varies":false,"variants":[{"id":5990398197787,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-EVO-XBOVBK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Mitsubishi Evolution 10 Silicone BOV Return Hose - Black - CZ4A - MMHOSE-EVO-XBOVBK","public_title":null,"options":["Default Title"],"price":22528,"weight":5633,"compare_at_price":35200,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-EVO-XBOVBK.jpg?v=1710154161"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-EVO-XBOVBK.jpg?v=1710154161","options":["Title"],"media":[{"alt":"Mishimoto - Mitsubishi Evolution 10 Silicone BOV Return Hose - Black - CZ4A - MMHOSE-EVO-XBOVBK - Rzcrewgarage","id":1351404355681,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-EVO-XBOVBK.jpg?v=1710154161"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-EVO-XBOVBK.jpg?v=1710154161","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-EVO-XBOVBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for Mitsubishi Lancer Evolution 10\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(2) T-Bolt Clamps\u003cbr\u003e\u003cbr\u003eOuter Diameter Hose 1: 1.80\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter Hose 1: 1.30\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto introduces the Mitsubishi Evolution X silicone BOV return hose. Created from high grade silicone and heat resistant embedded fibers, this is a direct replacement for your Mitsubishi EVO X and is sure to outlast the stock rubber BOV return hose. Not only will it be more durable than original equipment, it will add a unique touch to your engine bay!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for Mitsubishi Lancer Evolution 10\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(2) T-Bolt Clamps\u003cbr\u003e\u003cbr\u003eOuter Diameter Hose 1: 1.80\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter Hose 1: 1.30\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto introduces the Mitsubishi Evolution X silicone BOV return hose. Created from high grade silicone and heat resistant embedded fibers, this is a direct replacement for your Mitsubishi EVO X and is sure to outlast the stock rubber BOV return hose. Not only will it be more durable than original equipment, it will add a unique touch to your engine bay!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 4 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561998954523,"title":"Mishimoto - Mitsubishi Evolution 10 Silicone BOV Return Hose - Blue - CZ4A - MMHOSE-EVO-XBOVBL","handle":"mishimoto-mitsubishi-evolution-10-silicone-bov-return-hose-blue-cz4a-mmhose-evo-xbovbl","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-EVO-XBOVBL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for Mitsubishi Lancer Evolution 10\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(2) T-Bolt Clamps\u003cbr\u003e\u003cbr\u003eOuter Diameter Hose 1: 1.80\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter Hose 1: 1.30\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto introduces the Mitsubishi Evolution X silicone BOV return hose. Created from high grade silicone and heat resistant embedded fibers, this is a direct replacement for your Mitsubishi EVO X and is sure to outlast the stock rubber BOV return hose. Not only will it be more durable than original equipment, it will add a unique touch to your engine bay!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for Mitsubishi Lancer Evolution 10\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(2) T-Bolt Clamps\u003cbr\u003e\u003cbr\u003eOuter Diameter Hose 1: 1.80\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter Hose 1: 1.30\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto introduces the Mitsubishi Evolution X silicone BOV return hose. Created from high grade silicone and heat resistant embedded fibers, this is a direct replacement for your Mitsubishi EVO X and is sure to outlast the stock rubber BOV return hose. Not only will it be more durable than original equipment, it will add a unique touch to your engine bay!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:26:23+08:00","created_at":"2018-01-24T23:26:24+08:00","vendor":"Mishimoto","type":"F\/I System Hoses","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","bov-return-hoses","f-i-system-hoses","lancer-evolution-x-cz4a-chuki-gsr-jdmmr-2008-2009-tc-4b11-i4","lancer-evolution-x-cz4a-chuki-rs-jdmgsr-2008-2009-tc-4b11-i4","lancer-evolution-x-cz4a-kouki-gsr-jdmmr-2009-2017-tc-4b11-i4","lancer-evolution-x-cz4a-kouki-rs-jdmgsr-2009-2017-tc-4b11-i4","lancer-evolution-x-cz4a-zenki-gsr-jdmmr-2007-2008-tc-4b11-i4","lancer-evolution-x-cz4a-zenki-rs-jdmgsr-2007-2008-tc-4b11-i4","lancer-evolution-x-cz4agsr-jdmmr-2007-2017-tc-4b11-i4","lancer-evolution-x-cz4ars-jdmgsr-2007-2017-tc-4b11-i4","mishimoto","mitsubishi","us1","ws136"],"price":22528,"price_min":22528,"price_max":22528,"available":true,"price_varies":false,"compare_at_price":35200,"compare_at_price_min":35200,"compare_at_price_max":35200,"compare_at_price_varies":false,"variants":[{"id":5990398230555,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-EVO-XBOVBL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Mitsubishi Evolution 10 Silicone BOV Return Hose - Blue - CZ4A - MMHOSE-EVO-XBOVBL","public_title":null,"options":["Default Title"],"price":22528,"weight":5633,"compare_at_price":35200,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-EVO-XBOVBL.jpg?v=1710154161"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-EVO-XBOVBL.jpg?v=1710154161","options":["Title"],"media":[{"alt":"Mishimoto - Mitsubishi Evolution 10 Silicone BOV Return Hose - Blue - CZ4A - MMHOSE-EVO-XBOVBL - Rzcrewgarage","id":1351404453985,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-EVO-XBOVBL.jpg?v=1710154161"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-EVO-XBOVBL.jpg?v=1710154161","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-EVO-XBOVBL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for Mitsubishi Lancer Evolution 10\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(2) T-Bolt Clamps\u003cbr\u003e\u003cbr\u003eOuter Diameter Hose 1: 1.80\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter Hose 1: 1.30\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto introduces the Mitsubishi Evolution X silicone BOV return hose. Created from high grade silicone and heat resistant embedded fibers, this is a direct replacement for your Mitsubishi EVO X and is sure to outlast the stock rubber BOV return hose. Not only will it be more durable than original equipment, it will add a unique touch to your engine bay!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for Mitsubishi Lancer Evolution 10\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(2) T-Bolt Clamps\u003cbr\u003e\u003cbr\u003eOuter Diameter Hose 1: 1.80\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter Hose 1: 1.30\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto introduces the Mitsubishi Evolution X silicone BOV return hose. Created from high grade silicone and heat resistant embedded fibers, this is a direct replacement for your Mitsubishi EVO X and is sure to outlast the stock rubber BOV return hose. Not only will it be more durable than original equipment, it will add a unique touch to your engine bay!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561998987291,"title":"Mishimoto - Mitsubishi Evolution 10 Silicone BOV Return Hose - Red - CZ4A - MMHOSE-EVO-XBOVRD","handle":"mishimoto-mitsubishi-evolution-10-silicone-bov-return-hose-red-cz4a-mmhose-evo-xbovrd","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-EVO-XBOVRD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for Mitsubishi Lancer Evolution 10\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(2) T-Bolt Clamps\u003cbr\u003e\u003cbr\u003eOuter Diameter Hose 1: 1.80\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter Hose 1: 1.30\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto introduces the Mitsubishi Evolution X silicone BOV return hose. Created from high grade silicone and heat resistant embedded fibers, this is a direct replacement for your Mitsubishi EVO X and is sure to outlast the stock rubber BOV return hose. Not only will it be more durable than original equipment, it will add a unique touch to your engine bay!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for Mitsubishi Lancer Evolution 10\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(2) T-Bolt Clamps\u003cbr\u003e\u003cbr\u003eOuter Diameter Hose 1: 1.80\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter Hose 1: 1.30\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto introduces the Mitsubishi Evolution X silicone BOV return hose. Created from high grade silicone and heat resistant embedded fibers, this is a direct replacement for your Mitsubishi EVO X and is sure to outlast the stock rubber BOV return hose. Not only will it be more durable than original equipment, it will add a unique touch to your engine bay!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 5 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:26:24+08:00","created_at":"2018-01-24T23:26:24+08:00","vendor":"Mishimoto","type":"F\/I System Hoses","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","bov-return-hoses","f-i-system-hoses","lancer-evolution-x-cz4a-chuki-gsr-jdmmr-2008-2009-tc-4b11-i4","lancer-evolution-x-cz4a-chuki-rs-jdmgsr-2008-2009-tc-4b11-i4","lancer-evolution-x-cz4a-kouki-gsr-jdmmr-2009-2017-tc-4b11-i4","lancer-evolution-x-cz4a-kouki-rs-jdmgsr-2009-2017-tc-4b11-i4","lancer-evolution-x-cz4a-zenki-gsr-jdmmr-2007-2008-tc-4b11-i4","lancer-evolution-x-cz4a-zenki-rs-jdmgsr-2007-2008-tc-4b11-i4","lancer-evolution-x-cz4agsr-jdmmr-2007-2017-tc-4b11-i4","lancer-evolution-x-cz4ars-jdmgsr-2007-2017-tc-4b11-i4","mishimoto","mitsubishi","us1","ws136"],"price":22528,"price_min":22528,"price_max":22528,"available":true,"price_varies":false,"compare_at_price":35200,"compare_at_price_min":35200,"compare_at_price_max":35200,"compare_at_price_varies":false,"variants":[{"id":5990398263323,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMHOSE-EVO-XBOVRD","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Mitsubishi Evolution 10 Silicone BOV Return Hose - Red - CZ4A - MMHOSE-EVO-XBOVRD","public_title":null,"options":["Default Title"],"price":22528,"weight":5769,"compare_at_price":35200,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-EVO-XBOVRD.jpg?v=1710154163"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-EVO-XBOVRD.jpg?v=1710154163","options":["Title"],"media":[{"alt":"Mishimoto - Mitsubishi Evolution 10 Silicone BOV Return Hose - Red - CZ4A - MMHOSE-EVO-XBOVRD - Rzcrewgarage","id":1351404486753,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-EVO-XBOVRD.jpg?v=1710154163"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMHOSE-EVO-XBOVRD.jpg?v=1710154163","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMHOSE-EVO-XBOVRD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for Mitsubishi Lancer Evolution 10\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(2) T-Bolt Clamps\u003cbr\u003e\u003cbr\u003eOuter Diameter Hose 1: 1.80\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter Hose 1: 1.30\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto introduces the Mitsubishi Evolution X silicone BOV return hose. Created from high grade silicone and heat resistant embedded fibers, this is a direct replacement for your Mitsubishi EVO X and is sure to outlast the stock rubber BOV return hose. Not only will it be more durable than original equipment, it will add a unique touch to your engine bay!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for Mitsubishi Lancer Evolution 10\u003cbr\u003eMax temperature of 330°F\u003cbr\u003eMade of high grade silicone and heat-resistant embedded fibers\u003cbr\u003eEfficiently reduces heat\u003cbr\u003eIncreases pressure tolerance\u003cbr\u003eOEM replacement fit\u003cbr\u003eAvailable in black, blue, or red\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Silicone\u003cbr\u003eExterior Material Silicone\u003cbr\u003eInterior Material Heat-Resistant Embedded Fibers\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Silicone Hose\u003cbr\u003e(2) T-Bolt Clamps\u003cbr\u003e\u003cbr\u003eOuter Diameter Hose 1: 1.80\" \u003cbr\u003eMax Temp 330°F\u003cbr\u003eInner Diameter Hose 1: 1.30\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto introduces the Mitsubishi Evolution X silicone BOV return hose. Created from high grade silicone and heat resistant embedded fibers, this is a direct replacement for your Mitsubishi EVO X and is sure to outlast the stock rubber BOV return hose. Not only will it be more durable than original equipment, it will add a unique touch to your engine bay!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 5 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561988894747,"title":"Mishimoto - Mitsubishi Lancer Evolution 7\/8\/9 Oil Cooler Kit - CT9A 7-8-9 - MMOC-EVO-01","handle":"mishimoto-mitsubishi-lancer-evolution-7-8-9-oil-cooler-kit-ct9a-7-8-9-mmoc-evo-01","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-EVO-01\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e10% greater cooling efficiency than stock\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Lancer\u003cbr\u003eEvolution\u003cbr\u003eStealth Black or Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eIncludes braided stainless steel lines\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 7.32\"\u003cbr\u003eRows 25 Cooler Construction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 4G63\u003cbr\u003eChassis Codes CT9A\u003cbr\u003ePressure Drop 2-3 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity No increase\u003cbr\u003eTemp Difference 20-30°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets\u003cbr\u003e(1) 25-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 1ft, 4.5in Stainless Steel Braided Hose with 90 Degree \/ Straight-10AN Fittings\u003cbr\u003e(1) 1ft, 3in Stainless Steel Braided Hose with 45 Degree and 90 Degree -10AN Fittings\u003cbr\u003e(1) M18 x -10AN Straight Fitting\u003cbr\u003e(1) Banjo Fitting w\/ Bolt M18 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Lancer Evolution is a great vehicle for sliding around back roads, plowing through the straightaway at a road course, or just picking up the kids from school. The turbocharged four cylinder demands an effective and reliable cooling system to perform at its best. The Mitsubishi Lancer Evolution 7\/8\/9 Oil Cooler Kit is ideal for reducing temperatures in your street or track Evo. This kit places a large 25-row cooler in the front bumper for optimum airflow and cooling efficiency. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit includes direct-fit, application-specific brackets and durable preassembled stainless steel oil lines with -10AN fittings for a bolt-on installation that completely replaces your stock oil-cooling unit. The large and efficient Mishimoto 25-row, stacked-plate oil cooler will decrease oil temperatures by up to 30 degrees and reduce oil degradation, resulting in proper lubrication of engine and turbocharger components, even under the stress of competitive driving. \u003cbr\u003e\u003cbr\u003eCombine this oil cooler kit with the Mishimoto Lancer Evolution Performance Aluminum Radiator and silicone radiator hose kit for complete control over your engine fluid temperatures! As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e10% greater cooling efficiency than stock\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Lancer\u003cbr\u003eEvolution\u003cbr\u003eStealth Black or Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eIncludes braided stainless steel lines\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 7.32\"\u003cbr\u003eRows 25 Cooler Construction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 4G63\u003cbr\u003eChassis Codes CT9A\u003cbr\u003ePressure Drop 2-3 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity No increase\u003cbr\u003eTemp Difference 20-30°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets\u003cbr\u003e(1) 25-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 1ft, 4.5in Stainless Steel Braided Hose with 90 Degree \/ Straight-10AN Fittings\u003cbr\u003e(1) 1ft, 3in Stainless Steel Braided Hose with 45 Degree and 90 Degree -10AN Fittings\u003cbr\u003e(1) M18 x -10AN Straight Fitting\u003cbr\u003e(1) Banjo Fitting w\/ Bolt M18 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Lancer Evolution is a great vehicle for sliding around back roads, plowing through the straightaway at a road course, or just picking up the kids from school. The turbocharged four cylinder demands an effective and reliable cooling system to perform at its best. The Mitsubishi Lancer Evolution 7\/8\/9 Oil Cooler Kit is ideal for reducing temperatures in your street or track Evo. This kit places a large 25-row cooler in the front bumper for optimum airflow and cooling efficiency. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit includes direct-fit, application-specific brackets and durable preassembled stainless steel oil lines with -10AN fittings for a bolt-on installation that completely replaces your stock oil-cooling unit. The large and efficient Mishimoto 25-row, stacked-plate oil cooler will decrease oil temperatures by up to 30 degrees and reduce oil degradation, resulting in proper lubrication of engine and turbocharger components, even under the stress of competitive driving. \u003cbr\u003e\u003cbr\u003eCombine this oil cooler kit with the Mishimoto Lancer Evolution Performance Aluminum Radiator and silicone radiator hose kit for complete control over your engine fluid temperatures! As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:31+08:00","created_at":"2018-01-24T23:24:32+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2001","2002","2003","2004","2005","2006","2007","car-specific","cooling","lancer-evolution-ix-ct9a-2005-2007-tc-4g63t-mivec-i4","lancer-evolution-vii-ct9a-2001-2002-tc-4g63t-3rd-gen-i4","lancer-evolution-viii-ct9a-2003-2005-tc-4g63t-mivec-i4","mishimoto","mitsubishi","oil-cooler-kits","oil-coolers","us1","ws112"],"price":77440,"price_min":77440,"price_max":77440,"available":true,"price_varies":false,"compare_at_price":88000,"compare_at_price_min":88000,"compare_at_price_max":88000,"compare_at_price_varies":false,"variants":[{"id":5990385680411,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-EVO-01","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Mitsubishi Lancer Evolution 7\/8\/9 Oil Cooler Kit - CT9A 7-8-9 - MMOC-EVO-01","public_title":null,"options":["Default Title"],"price":77440,"weight":8853,"compare_at_price":88000,"inventory_quantity":16,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-EVO-01.jpg?v=1710154085"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-EVO-01.jpg?v=1710154085","options":["Title"],"media":[{"alt":"Mishimoto - Mitsubishi Lancer Evolution 7\/8\/9 Oil Cooler Kit - CT9A 7-8-9 - MMOC-EVO-01 - Rzcrewgarage","id":1351400521825,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-EVO-01.jpg?v=1710154085"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-EVO-01.jpg?v=1710154085","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-EVO-01\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e10% greater cooling efficiency than stock\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Lancer\u003cbr\u003eEvolution\u003cbr\u003eStealth Black or Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eIncludes braided stainless steel lines\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 7.32\"\u003cbr\u003eRows 25 Cooler Construction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 4G63\u003cbr\u003eChassis Codes CT9A\u003cbr\u003ePressure Drop 2-3 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity No increase\u003cbr\u003eTemp Difference 20-30°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets\u003cbr\u003e(1) 25-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 1ft, 4.5in Stainless Steel Braided Hose with 90 Degree \/ Straight-10AN Fittings\u003cbr\u003e(1) 1ft, 3in Stainless Steel Braided Hose with 45 Degree and 90 Degree -10AN Fittings\u003cbr\u003e(1) M18 x -10AN Straight Fitting\u003cbr\u003e(1) Banjo Fitting w\/ Bolt M18 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Lancer Evolution is a great vehicle for sliding around back roads, plowing through the straightaway at a road course, or just picking up the kids from school. The turbocharged four cylinder demands an effective and reliable cooling system to perform at its best. The Mitsubishi Lancer Evolution 7\/8\/9 Oil Cooler Kit is ideal for reducing temperatures in your street or track Evo. This kit places a large 25-row cooler in the front bumper for optimum airflow and cooling efficiency. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit includes direct-fit, application-specific brackets and durable preassembled stainless steel oil lines with -10AN fittings for a bolt-on installation that completely replaces your stock oil-cooling unit. The large and efficient Mishimoto 25-row, stacked-plate oil cooler will decrease oil temperatures by up to 30 degrees and reduce oil degradation, resulting in proper lubrication of engine and turbocharger components, even under the stress of competitive driving. \u003cbr\u003e\u003cbr\u003eCombine this oil cooler kit with the Mishimoto Lancer Evolution Performance Aluminum Radiator and silicone radiator hose kit for complete control over your engine fluid temperatures! As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e10% greater cooling efficiency than stock\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Lancer\u003cbr\u003eEvolution\u003cbr\u003eStealth Black or Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eIncludes braided stainless steel lines\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 7.32\"\u003cbr\u003eRows 25 Cooler Construction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 4G63\u003cbr\u003eChassis Codes CT9A\u003cbr\u003ePressure Drop 2-3 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity No increase\u003cbr\u003eTemp Difference 20-30°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets\u003cbr\u003e(1) 25-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 1ft, 4.5in Stainless Steel Braided Hose with 90 Degree \/ Straight-10AN Fittings\u003cbr\u003e(1) 1ft, 3in Stainless Steel Braided Hose with 45 Degree and 90 Degree -10AN Fittings\u003cbr\u003e(1) M18 x -10AN Straight Fitting\u003cbr\u003e(1) Banjo Fitting w\/ Bolt M18 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Lancer Evolution is a great vehicle for sliding around back roads, plowing through the straightaway at a road course, or just picking up the kids from school. The turbocharged four cylinder demands an effective and reliable cooling system to perform at its best. The Mitsubishi Lancer Evolution 7\/8\/9 Oil Cooler Kit is ideal for reducing temperatures in your street or track Evo. This kit places a large 25-row cooler in the front bumper for optimum airflow and cooling efficiency. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit includes direct-fit, application-specific brackets and durable preassembled stainless steel oil lines with -10AN fittings for a bolt-on installation that completely replaces your stock oil-cooling unit. The large and efficient Mishimoto 25-row, stacked-plate oil cooler will decrease oil temperatures by up to 30 degrees and reduce oil degradation, resulting in proper lubrication of engine and turbocharger components, even under the stress of competitive driving. \u003cbr\u003e\u003cbr\u003eCombine this oil cooler kit with the Mishimoto Lancer Evolution Performance Aluminum Radiator and silicone radiator hose kit for complete control over your engine fluid temperatures! As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 2 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561988927515,"title":"Mishimoto - Mitsubishi Lancer Evolution 7\/8\/9 Oil Cooler Kit, Black - Black - CT9A 7-8-9 - MMOC-EVO-01BK","handle":"mishimoto-mitsubishi-lancer-evolution-7-8-9-oil-cooler-kit-black-black-ct9a-7-8-9-mmoc-evo-01bk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-EVO-01BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e10% greater cooling efficiency than stock\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Lancer\u003cbr\u003eEvolution\u003cbr\u003eStealth Black or Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eIncludes braided stainless steel lines\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 7.32\"\u003cbr\u003eRows 25 Cooler Construction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 4G63\u003cbr\u003eChassis Codes CT9A\u003cbr\u003ePressure Drop 2-3 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity No increase\u003cbr\u003eTemp Difference 20-30°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets\u003cbr\u003e(1) 25-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 1ft, 4.5in Stainless Steel Braided Hose with 90 Degree \/ Straight-10AN Fittings\u003cbr\u003e(1) 1ft, 3in Stainless Steel Braided Hose with 45 Degree and 90 Degree -10AN Fittings\u003cbr\u003e(1) M18 x -10AN Straight Fitting\u003cbr\u003e(1) Banjo Fitting w\/ Bolt M18 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Lancer Evolution is a great vehicle for sliding around back roads, plowing through the straightaway at a road course, or just picking up the kids from school. The turbocharged four cylinder demands an effective and reliable cooling system to perform at its best. The Mitsubishi Lancer Evolution 7\/8\/9 Oil Cooler Kit is ideal for reducing temperatures in your street or track Evo. This kit places a large 25-row cooler in the front bumper for optimum airflow and cooling efficiency. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit includes direct-fit, application-specific brackets and durable preassembled stainless steel oil lines with -10AN fittings for a bolt-on installation that completely replaces your stock oil-cooling unit. The large and efficient Mishimoto 25-row, stacked-plate oil cooler will decrease oil temperatures by up to 30 degrees and reduce oil degradation, resulting in proper lubrication of engine and turbocharger components, even under the stress of competitive driving. \u003cbr\u003e\u003cbr\u003eCombine this oil cooler kit with the Mishimoto Lancer Evolution Performance Aluminum Radiator and silicone radiator hose kit for complete control over your engine fluid temperatures! As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e10% greater cooling efficiency than stock\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Lancer\u003cbr\u003eEvolution\u003cbr\u003eStealth Black or Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eIncludes braided stainless steel lines\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 7.32\"\u003cbr\u003eRows 25 Cooler Construction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 4G63\u003cbr\u003eChassis Codes CT9A\u003cbr\u003ePressure Drop 2-3 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity No increase\u003cbr\u003eTemp Difference 20-30°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets\u003cbr\u003e(1) 25-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 1ft, 4.5in Stainless Steel Braided Hose with 90 Degree \/ Straight-10AN Fittings\u003cbr\u003e(1) 1ft, 3in Stainless Steel Braided Hose with 45 Degree and 90 Degree -10AN Fittings\u003cbr\u003e(1) M18 x -10AN Straight Fitting\u003cbr\u003e(1) Banjo Fitting w\/ Bolt M18 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Lancer Evolution is a great vehicle for sliding around back roads, plowing through the straightaway at a road course, or just picking up the kids from school. The turbocharged four cylinder demands an effective and reliable cooling system to perform at its best. The Mitsubishi Lancer Evolution 7\/8\/9 Oil Cooler Kit is ideal for reducing temperatures in your street or track Evo. This kit places a large 25-row cooler in the front bumper for optimum airflow and cooling efficiency. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit includes direct-fit, application-specific brackets and durable preassembled stainless steel oil lines with -10AN fittings for a bolt-on installation that completely replaces your stock oil-cooling unit. The large and efficient Mishimoto 25-row, stacked-plate oil cooler will decrease oil temperatures by up to 30 degrees and reduce oil degradation, resulting in proper lubrication of engine and turbocharger components, even under the stress of competitive driving. \u003cbr\u003e\u003cbr\u003eCombine this oil cooler kit with the Mishimoto Lancer Evolution Performance Aluminum Radiator and silicone radiator hose kit for complete control over your engine fluid temperatures! As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 5 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:32+08:00","created_at":"2018-01-24T23:24:33+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2001","2002","2003","2004","2005","2006","2007","car-specific","cooling","lancer-evolution-ix-ct9a-2005-2007-tc-4g63t-mivec-i4","lancer-evolution-vii-ct9a-2001-2002-tc-4g63t-3rd-gen-i4","lancer-evolution-viii-ct9a-2003-2005-tc-4g63t-mivec-i4","mishimoto","mitsubishi","oil-cooler-kits","oil-coolers","us1","ws112"],"price":77440,"price_min":77440,"price_max":77440,"available":true,"price_varies":false,"compare_at_price":88000,"compare_at_price_min":88000,"compare_at_price_max":88000,"compare_at_price_varies":false,"variants":[{"id":5990385713179,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-EVO-01BK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Mitsubishi Lancer Evolution 7\/8\/9 Oil Cooler Kit, Black - Black - CT9A 7-8-9 - MMOC-EVO-01BK","public_title":null,"options":["Default Title"],"price":77440,"weight":8853,"compare_at_price":88000,"inventory_quantity":17,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-EVO-01BK.jpg?v=1710154085"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-EVO-01BK.jpg?v=1710154085","options":["Title"],"media":[{"alt":"Mishimoto - Mitsubishi Lancer Evolution 7\/8\/9 Oil Cooler Kit, Black - Black - CT9A 7-8-9 - MMOC-EVO-01BK - Rzcrewgarage","id":1351400554593,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-EVO-01BK.jpg?v=1710154085"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-EVO-01BK.jpg?v=1710154085","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-EVO-01BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e10% greater cooling efficiency than stock\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Lancer\u003cbr\u003eEvolution\u003cbr\u003eStealth Black or Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eIncludes braided stainless steel lines\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 7.32\"\u003cbr\u003eRows 25 Cooler Construction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 4G63\u003cbr\u003eChassis Codes CT9A\u003cbr\u003ePressure Drop 2-3 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity No increase\u003cbr\u003eTemp Difference 20-30°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets\u003cbr\u003e(1) 25-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 1ft, 4.5in Stainless Steel Braided Hose with 90 Degree \/ Straight-10AN Fittings\u003cbr\u003e(1) 1ft, 3in Stainless Steel Braided Hose with 45 Degree and 90 Degree -10AN Fittings\u003cbr\u003e(1) M18 x -10AN Straight Fitting\u003cbr\u003e(1) Banjo Fitting w\/ Bolt M18 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Lancer Evolution is a great vehicle for sliding around back roads, plowing through the straightaway at a road course, or just picking up the kids from school. The turbocharged four cylinder demands an effective and reliable cooling system to perform at its best. The Mitsubishi Lancer Evolution 7\/8\/9 Oil Cooler Kit is ideal for reducing temperatures in your street or track Evo. This kit places a large 25-row cooler in the front bumper for optimum airflow and cooling efficiency. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit includes direct-fit, application-specific brackets and durable preassembled stainless steel oil lines with -10AN fittings for a bolt-on installation that completely replaces your stock oil-cooling unit. The large and efficient Mishimoto 25-row, stacked-plate oil cooler will decrease oil temperatures by up to 30 degrees and reduce oil degradation, resulting in proper lubrication of engine and turbocharger components, even under the stress of competitive driving. \u003cbr\u003e\u003cbr\u003eCombine this oil cooler kit with the Mishimoto Lancer Evolution Performance Aluminum Radiator and silicone radiator hose kit for complete control over your engine fluid temperatures! As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e10% greater cooling efficiency than stock\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the Lancer\u003cbr\u003eEvolution\u003cbr\u003eStealth Black or Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eIncludes braided stainless steel lines\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 7.32\"\u003cbr\u003eRows 25 Cooler Construction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 4G63\u003cbr\u003eChassis Codes CT9A\u003cbr\u003ePressure Drop 2-3 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity No increase\u003cbr\u003eTemp Difference 20-30°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets\u003cbr\u003e(1) 25-Row Oil Cooler (Silver or Black)\u003cbr\u003e(1) 1ft, 4.5in Stainless Steel Braided Hose with 90 Degree \/ Straight-10AN Fittings\u003cbr\u003e(1) 1ft, 3in Stainless Steel Braided Hose with 45 Degree and 90 Degree -10AN Fittings\u003cbr\u003e(1) M18 x -10AN Straight Fitting\u003cbr\u003e(1) Banjo Fitting w\/ Bolt M18 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Lancer Evolution is a great vehicle for sliding around back roads, plowing through the straightaway at a road course, or just picking up the kids from school. The turbocharged four cylinder demands an effective and reliable cooling system to perform at its best. The Mitsubishi Lancer Evolution 7\/8\/9 Oil Cooler Kit is ideal for reducing temperatures in your street or track Evo. This kit places a large 25-row cooler in the front bumper for optimum airflow and cooling efficiency. \u003cbr\u003e\u003cbr\u003eThis oil cooler kit includes direct-fit, application-specific brackets and durable preassembled stainless steel oil lines with -10AN fittings for a bolt-on installation that completely replaces your stock oil-cooling unit. The large and efficient Mishimoto 25-row, stacked-plate oil cooler will decrease oil temperatures by up to 30 degrees and reduce oil degradation, resulting in proper lubrication of engine and turbocharger components, even under the stress of competitive driving. \u003cbr\u003e\u003cbr\u003eCombine this oil cooler kit with the Mishimoto Lancer Evolution Performance Aluminum Radiator and silicone radiator hose kit for complete control over your engine fluid temperatures! As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 5 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}