2011

{"id":561990926363,"title":"Mishimoto - Mazda RX8 Oil Line Kit - SE3P - MMSBH-RX8-04K","handle":"mishimoto-mazda-rx8-oil-line-kit-se3p-mmsbh-rx8-04k","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMSBH-RX8-04K\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2004–2011 Mazda RX-8\u003cbr\u003ePremade braided stainless steel oil lines and aluminum fittings replace corrosion-prone stock rubber lines\u003cbr\u003eFull kit includes four braided stainless steel oil lines, M18 banjo bolts, and all the necessary fittings and oil seals for a trouble-free installation\u003cbr\u003eOil lines come prelabeled for easy identification\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Stainless Steel\u003cbr\u003eMax Recommended PSI 750psi\u003cbr\u003eMin Temp -40°F\u003cbr\u003eNote This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eMax Temp +300°F\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 13B-MSP (Renesis)\u003cbr\u003eChassis Codes SE3P\u003cbr\u003eCaution This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) 2ft, 4in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(1) 4ft, 8in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 4in Stainless Steel Braided Hose with 45 Degree and Straight -10AN Fittings\u003cbr\u003e(1) 2ft, 2in Stainless Steel Braided Hose with 90 Degree and Straight -10AN Fittings\u003cbr\u003e(4) M18 x -10AN Fittings w\/ Dowty Oil Seals\u003cbr\u003e(2) M18 x -10AN Banjo Bolts w\/ Dowty Oil Seals\u003cbr\u003e(1) 10AN – 10AN Male Connector\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mazda RX-8 has a high-winding rotary engine capable of easily reaching 9,000 RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX-8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine’s oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber oil lines and steel fittings can severely corrode and degrade over time. \u003cbr\u003e\u003cbr\u003eThis full kit from Mishimoto replaces all the RX-8 oil cooler lines with braided stainless units and aluminum fittings that will not corrode or degrade over time. This oil line kit also replaces the most frequent line to corrode, which is located on the left hand side of the car near the front suspension assembly. With Mishimoto replacement Mazda RX-8 oil cooler lines, all oil lines between the engine and both oil coolers are replaced, including the intermediate line that spans both oil coolers found in all manual transmission models. \u003cbr\u003e\u003cbr\u003eThese Mazda RX-8 oil cooler lines fit onto the vehicle with no additional modification, and d not require any cutting to your vehicle or permanent removal of parts. This oil line kit comes with all banjo bolts, M18 fittings, and a male to male -10AN connector to complete the installation. Keep your RX-8 protected and running smooth! As with all our products, these RX-8 oil cooler lines include the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2004–2011 Mazda RX-8\u003cbr\u003ePremade braided stainless steel oil lines and aluminum fittings replace corrosion-prone stock rubber lines\u003cbr\u003eFull kit includes four braided stainless steel oil lines, M18 banjo bolts, and all the necessary fittings and oil seals for a trouble-free installation\u003cbr\u003eOil lines come prelabeled for easy identification\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Stainless Steel\u003cbr\u003eMax Recommended PSI 750psi\u003cbr\u003eMin Temp -40°F\u003cbr\u003eNote This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eMax Temp +300°F\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 13B-MSP (Renesis)\u003cbr\u003eChassis Codes SE3P\u003cbr\u003eCaution This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) 2ft, 4in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(1) 4ft, 8in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 4in Stainless Steel Braided Hose with 45 Degree and Straight -10AN Fittings\u003cbr\u003e(1) 2ft, 2in Stainless Steel Braided Hose with 90 Degree and Straight -10AN Fittings\u003cbr\u003e(4) M18 x -10AN Fittings w\/ Dowty Oil Seals\u003cbr\u003e(2) M18 x -10AN Banjo Bolts w\/ Dowty Oil Seals\u003cbr\u003e(1) 10AN – 10AN Male Connector\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mazda RX-8 has a high-winding rotary engine capable of easily reaching 9,000 RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX-8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine’s oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber oil lines and steel fittings can severely corrode and degrade over time. \u003cbr\u003e\u003cbr\u003eThis full kit from Mishimoto replaces all the RX-8 oil cooler lines with braided stainless units and aluminum fittings that will not corrode or degrade over time. This oil line kit also replaces the most frequent line to corrode, which is located on the left hand side of the car near the front suspension assembly. With Mishimoto replacement Mazda RX-8 oil cooler lines, all oil lines between the engine and both oil coolers are replaced, including the intermediate line that spans both oil coolers found in all manual transmission models. \u003cbr\u003e\u003cbr\u003eThese Mazda RX-8 oil cooler lines fit onto the vehicle with no additional modification, and d not require any cutting to your vehicle or permanent removal of parts. This oil line kit comes with all banjo bolts, M18 fittings, and a male to male -10AN connector to complete the installation. Keep your RX-8 protected and running smooth! As with all our products, these RX-8 oil cooler lines include the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:25:05+08:00","created_at":"2018-01-24T23:25:05+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","car-specific","cooling","mazda","mishimoto","oil-cooler-hoses","oil-coolers","rx-8-se3p-kouki-2008-2013-na-13b-msp-r","rx-8-se3p-zenki-2003-2008-na-13b-msp-r","us1","ws122"],"price":71760,"price_min":71760,"price_max":71760,"available":true,"price_varies":false,"compare_at_price":92000,"compare_at_price_min":92000,"compare_at_price_max":92000,"compare_at_price_varies":false,"variants":[{"id":5990388203547,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMSBH-RX8-04K","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Mazda RX8 Oil Line Kit - SE3P - MMSBH-RX8-04K","public_title":null,"options":["Default Title"],"price":71760,"weight":7719,"compare_at_price":92000,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMSBH-RX8-04K.jpg?v=1710154108"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMSBH-RX8-04K.jpg?v=1710154108","options":["Title"],"media":[{"alt":"Mishimoto - Mazda RX8 Oil Line Kit - SE3P - MMSBH-RX8-04K - Rzcrewgarage","id":1351401504865,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMSBH-RX8-04K.jpg?v=1710154108"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMSBH-RX8-04K.jpg?v=1710154108","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMSBH-RX8-04K\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2004–2011 Mazda RX-8\u003cbr\u003ePremade braided stainless steel oil lines and aluminum fittings replace corrosion-prone stock rubber lines\u003cbr\u003eFull kit includes four braided stainless steel oil lines, M18 banjo bolts, and all the necessary fittings and oil seals for a trouble-free installation\u003cbr\u003eOil lines come prelabeled for easy identification\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Stainless Steel\u003cbr\u003eMax Recommended PSI 750psi\u003cbr\u003eMin Temp -40°F\u003cbr\u003eNote This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eMax Temp +300°F\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 13B-MSP (Renesis)\u003cbr\u003eChassis Codes SE3P\u003cbr\u003eCaution This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) 2ft, 4in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(1) 4ft, 8in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 4in Stainless Steel Braided Hose with 45 Degree and Straight -10AN Fittings\u003cbr\u003e(1) 2ft, 2in Stainless Steel Braided Hose with 90 Degree and Straight -10AN Fittings\u003cbr\u003e(4) M18 x -10AN Fittings w\/ Dowty Oil Seals\u003cbr\u003e(2) M18 x -10AN Banjo Bolts w\/ Dowty Oil Seals\u003cbr\u003e(1) 10AN – 10AN Male Connector\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mazda RX-8 has a high-winding rotary engine capable of easily reaching 9,000 RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX-8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine’s oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber oil lines and steel fittings can severely corrode and degrade over time. \u003cbr\u003e\u003cbr\u003eThis full kit from Mishimoto replaces all the RX-8 oil cooler lines with braided stainless units and aluminum fittings that will not corrode or degrade over time. This oil line kit also replaces the most frequent line to corrode, which is located on the left hand side of the car near the front suspension assembly. With Mishimoto replacement Mazda RX-8 oil cooler lines, all oil lines between the engine and both oil coolers are replaced, including the intermediate line that spans both oil coolers found in all manual transmission models. \u003cbr\u003e\u003cbr\u003eThese Mazda RX-8 oil cooler lines fit onto the vehicle with no additional modification, and d not require any cutting to your vehicle or permanent removal of parts. This oil line kit comes with all banjo bolts, M18 fittings, and a male to male -10AN connector to complete the installation. Keep your RX-8 protected and running smooth! As with all our products, these RX-8 oil cooler lines include the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct fit for the 2004–2011 Mazda RX-8\u003cbr\u003ePremade braided stainless steel oil lines and aluminum fittings replace corrosion-prone stock rubber lines\u003cbr\u003eFull kit includes four braided stainless steel oil lines, M18 banjo bolts, and all the necessary fittings and oil seals for a trouble-free installation\u003cbr\u003eOil lines come prelabeled for easy identification\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Stainless Steel\u003cbr\u003eMax Recommended PSI 750psi\u003cbr\u003eMin Temp -40°F\u003cbr\u003eNote This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eMax Temp +300°F\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 13B-MSP (Renesis)\u003cbr\u003eChassis Codes SE3P\u003cbr\u003eCaution This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) 2ft, 4in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(1) 4ft, 8in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(1) 3ft, 4in Stainless Steel Braided Hose with 45 Degree and Straight -10AN Fittings\u003cbr\u003e(1) 2ft, 2in Stainless Steel Braided Hose with 90 Degree and Straight -10AN Fittings\u003cbr\u003e(4) M18 x -10AN Fittings w\/ Dowty Oil Seals\u003cbr\u003e(2) M18 x -10AN Banjo Bolts w\/ Dowty Oil Seals\u003cbr\u003e(1) 10AN – 10AN Male Connector\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mazda RX-8 has a high-winding rotary engine capable of easily reaching 9,000 RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX-8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine’s oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber oil lines and steel fittings can severely corrode and degrade over time. \u003cbr\u003e\u003cbr\u003eThis full kit from Mishimoto replaces all the RX-8 oil cooler lines with braided stainless units and aluminum fittings that will not corrode or degrade over time. This oil line kit also replaces the most frequent line to corrode, which is located on the left hand side of the car near the front suspension assembly. With Mishimoto replacement Mazda RX-8 oil cooler lines, all oil lines between the engine and both oil coolers are replaced, including the intermediate line that spans both oil coolers found in all manual transmission models. \u003cbr\u003e\u003cbr\u003eThese Mazda RX-8 oil cooler lines fit onto the vehicle with no additional modification, and d not require any cutting to your vehicle or permanent removal of parts. This oil line kit comes with all banjo bolts, M18 fittings, and a male to male -10AN connector to complete the installation. Keep your RX-8 protected and running smooth! As with all our products, these RX-8 oil cooler lines include the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561992204315,"title":"Mishimoto - Mazda RX8 Primary Replacement Oil Line - SE3P - MMSBH-RX8-04","handle":"mishimoto-mazda-rx8-primary-replacement-oil-line-se3p-mmsbh-rx8-04","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMSBH-RX8-04\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct-fit replacement for the 2004–2011 Mazda RX-8\u003cbr\u003ePremade braided stainless steel oil line and aluminum fittings replace corrosion-prone stock rubber line\u003cbr\u003eKit comes with the braided stainless steel line, M18 banjo bolts, and oil seals for a trouble-free installation\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Stainless Steel\u003cbr\u003eMax Recommended PSI 750psi\u003cbr\u003eMin Temp -40°F\u003cbr\u003eNote This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eMax Temp +300°F\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 13B-MSP (Renesis)\u003cbr\u003eChassis Codes SE3P\u003cbr\u003eCaution This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) 2ft, 4in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(2) M18 x -10AN Banjo Bolts w\/ Dowty Oil Seals\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mazda RX-8 has a high-winding rotary engine capable of easily reaching 9,000 RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX-8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine’s oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber RX-8 oil cooler lines and steel fittings can severely corrode and degrade over time. The most frequent RX-8 oil cooler line to corrode is located on the left hand side of the car near the front suspension assembly. The design of the vehicle and location of the line are apt to collect dirt and road salt from winter. With the Mishimoto replacement oil line, not only is this problematic line replaced, it’s replaced with a full braided stainless steel oil line and aluminum M18 to 10AN banjo fittings that will not corrode or break down over time. The Mazda RX-8 oil cooler line fits onto the vehicle with no additional modification, and does not require any cutting to your vehicle or permanent removal of parts. Keep your RX-8 protected and running smooth! As with all our products, this RX-8 oil cooler line includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct-fit replacement for the 2004–2011 Mazda RX-8\u003cbr\u003ePremade braided stainless steel oil line and aluminum fittings replace corrosion-prone stock rubber line\u003cbr\u003eKit comes with the braided stainless steel line, M18 banjo bolts, and oil seals for a trouble-free installation\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Stainless Steel\u003cbr\u003eMax Recommended PSI 750psi\u003cbr\u003eMin Temp -40°F\u003cbr\u003eNote This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eMax Temp +300°F\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 13B-MSP (Renesis)\u003cbr\u003eChassis Codes SE3P\u003cbr\u003eCaution This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) 2ft, 4in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(2) M18 x -10AN Banjo Bolts w\/ Dowty Oil Seals\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mazda RX-8 has a high-winding rotary engine capable of easily reaching 9,000 RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX-8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine’s oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber RX-8 oil cooler lines and steel fittings can severely corrode and degrade over time. The most frequent RX-8 oil cooler line to corrode is located on the left hand side of the car near the front suspension assembly. The design of the vehicle and location of the line are apt to collect dirt and road salt from winter. With the Mishimoto replacement oil line, not only is this problematic line replaced, it’s replaced with a full braided stainless steel oil line and aluminum M18 to 10AN banjo fittings that will not corrode or break down over time. The Mazda RX-8 oil cooler line fits onto the vehicle with no additional modification, and does not require any cutting to your vehicle or permanent removal of parts. Keep your RX-8 protected and running smooth! As with all our products, this RX-8 oil cooler line includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:25:13+08:00","created_at":"2018-01-24T23:25:14+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2003","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","car-specific","cooling","mazda","mishimoto","oil-cooler-hoses","oil-coolers","rx-8-se3p-kouki-2008-2013-na-13b-msp-r","rx-8-se3p-zenki-2003-2008-na-13b-msp-r","us1","ws122"],"price":23088,"price_min":23088,"price_max":23088,"available":true,"price_varies":false,"compare_at_price":29600,"compare_at_price_min":29600,"compare_at_price_max":29600,"compare_at_price_varies":false,"variants":[{"id":5990391185435,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMSBH-RX8-04","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Mazda RX8 Primary Replacement Oil Line - SE3P - MMSBH-RX8-04","public_title":null,"options":["Default Title"],"price":23088,"weight":5134,"compare_at_price":29600,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMSBH-RX8-04.jpg?v=1710154111"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMSBH-RX8-04.jpg?v=1710154111","options":["Title"],"media":[{"alt":"Mishimoto - Mazda RX8 Primary Replacement Oil Line - SE3P - MMSBH-RX8-04 - Rzcrewgarage","id":1351401734241,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMSBH-RX8-04.jpg?v=1710154111"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMSBH-RX8-04.jpg?v=1710154111","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMSBH-RX8-04\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct-fit replacement for the 2004–2011 Mazda RX-8\u003cbr\u003ePremade braided stainless steel oil line and aluminum fittings replace corrosion-prone stock rubber line\u003cbr\u003eKit comes with the braided stainless steel line, M18 banjo bolts, and oil seals for a trouble-free installation\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Stainless Steel\u003cbr\u003eMax Recommended PSI 750psi\u003cbr\u003eMin Temp -40°F\u003cbr\u003eNote This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eMax Temp +300°F\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 13B-MSP (Renesis)\u003cbr\u003eChassis Codes SE3P\u003cbr\u003eCaution This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) 2ft, 4in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(2) M18 x -10AN Banjo Bolts w\/ Dowty Oil Seals\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mazda RX-8 has a high-winding rotary engine capable of easily reaching 9,000 RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX-8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine’s oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber RX-8 oil cooler lines and steel fittings can severely corrode and degrade over time. The most frequent RX-8 oil cooler line to corrode is located on the left hand side of the car near the front suspension assembly. The design of the vehicle and location of the line are apt to collect dirt and road salt from winter. With the Mishimoto replacement oil line, not only is this problematic line replaced, it’s replaced with a full braided stainless steel oil line and aluminum M18 to 10AN banjo fittings that will not corrode or break down over time. The Mazda RX-8 oil cooler line fits onto the vehicle with no additional modification, and does not require any cutting to your vehicle or permanent removal of parts. Keep your RX-8 protected and running smooth! As with all our products, this RX-8 oil cooler line includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Direct-fit replacement for the 2004–2011 Mazda RX-8\u003cbr\u003ePremade braided stainless steel oil line and aluminum fittings replace corrosion-prone stock rubber line\u003cbr\u003eKit comes with the braided stainless steel line, M18 banjo bolts, and oil seals for a trouble-free installation\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial Stainless Steel\u003cbr\u003eMax Recommended PSI 750psi\u003cbr\u003eMin Temp -40°F\u003cbr\u003eNote This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eMax Temp +300°F\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 13B-MSP (Renesis)\u003cbr\u003eChassis Codes SE3P\u003cbr\u003eCaution This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.\u003cbr\u003eRecommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) 2ft, 4in Stainless Steel Braided Hose with 90 Degree -10AN Fittings\u003cbr\u003e(2) M18 x -10AN Banjo Bolts w\/ Dowty Oil Seals\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Mazda RX-8 has a high-winding rotary engine capable of easily reaching 9,000 RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX-8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine’s oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber RX-8 oil cooler lines and steel fittings can severely corrode and degrade over time. The most frequent RX-8 oil cooler line to corrode is located on the left hand side of the car near the front suspension assembly. The design of the vehicle and location of the line are apt to collect dirt and road salt from winter. With the Mishimoto replacement oil line, not only is this problematic line replaced, it’s replaced with a full braided stainless steel oil line and aluminum M18 to 10AN banjo fittings that will not corrode or break down over time. The Mazda RX-8 oil cooler line fits onto the vehicle with no additional modification, and does not require any cutting to your vehicle or permanent removal of parts. Keep your RX-8 protected and running smooth! As with all our products, this RX-8 oil cooler line includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561992040475,"title":"Mishimoto - Mishimoto BMW E36 E46 Oil Line Fitting Kit - E36 E46 - MMOCF-BMW","handle":"mishimoto-mishimoto-bmw-e36-e46-oil-line-fitting-kit-e36-e46-mmocf-bmw","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOCF-BMW\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Allows for use of -10AN fittings for custom\u003cbr\u003e100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate\u003cbr\u003eIncludes durable stock\u003cbr\u003eBMW O-rings for leak-free installation\u003cbr\u003eProvides additional engine bay space for applications with an oil accumulator or supercharger setup\u003cbr\u003eIncluded as part of the Mishimoto BMW E46 M3 Oil Cooler Kit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial \u003cbr\u003eFITTING CLAMP MATERIAL\u003cbr\u003e303 Stainless Steel\u003cbr\u003e\u003cbr\u003e-10AN FITTINGS MATERIAL\u003cbr\u003e6061 Aluminum\u003cbr\u003e\u003cbr\u003eNote This kit works with vehicles which have stock oil cooler housings.\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes S54, N54, N55\u003cbr\u003eChassis Codes E36, E46\u003cbr\u003eInstall Torque Specs 10 ft\/lbs for Oil Line Fitting Kit bolt\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eOverall Height 1.3\" \u003cbr\u003eOverall Length 2.44\" \u003cbr\u003eOverall Width 1.51\" (assembled) \u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Fitting Clamp \u003cbr\u003e(2) -10AN Fittings \u003cbr\u003e(2) BMW Oil O-rings \u003cbr\u003e(1) M8 x 1.25 x 25mm Button-Head Bolt \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eInstall a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Pair this fitting kit with some Mishimoto stainless steel oil lines and one of our stacked-plate oil coolers to create a complete cooling setup for your BMW. As with all our products, the Mishimoto BMW Oil Line Fitting Kit includes our Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Allows for use of -10AN fittings for custom\u003cbr\u003e100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate\u003cbr\u003eIncludes durable stock\u003cbr\u003eBMW O-rings for leak-free installation\u003cbr\u003eProvides additional engine bay space for applications with an oil accumulator or supercharger setup\u003cbr\u003eIncluded as part of the Mishimoto BMW E46 M3 Oil Cooler Kit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial \u003cbr\u003eFITTING CLAMP MATERIAL\u003cbr\u003e303 Stainless Steel\u003cbr\u003e\u003cbr\u003e-10AN FITTINGS MATERIAL\u003cbr\u003e6061 Aluminum\u003cbr\u003e\u003cbr\u003eNote This kit works with vehicles which have stock oil cooler housings.\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes S54, N54, N55\u003cbr\u003eChassis Codes E36, E46\u003cbr\u003eInstall Torque Specs 10 ft\/lbs for Oil Line Fitting Kit bolt\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eOverall Height 1.3\" \u003cbr\u003eOverall Length 2.44\" \u003cbr\u003eOverall Width 1.51\" (assembled) \u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Fitting Clamp \u003cbr\u003e(2) -10AN Fittings \u003cbr\u003e(2) BMW Oil O-rings \u003cbr\u003e(1) M8 x 1.25 x 25mm Button-Head Bolt \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eInstall a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Pair this fitting kit with some Mishimoto stainless steel oil lines and one of our stacked-plate oil coolers to create a complete cooling setup for your BMW. As with all our products, the Mishimoto BMW Oil Line Fitting Kit includes our Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:25:09+08:00","created_at":"2018-01-24T23:25:09+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["1-series-e82-2007-2013-tc-i6","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","3-series-cabriolet-e93-2004-2011-na-i6","3-series-cabriolet-e93-2007-2013-tc-i6","3-series-coupe-e92-2004-2011-na-i6","3-series-coupe-e92-2007-2013-tc-i6","3-series-e90-2004-2011-na-i6","3-series-e90-2007-2013-tc-i6","bmw","car-specific","cooling","mishimoto","oil-cooler-accessories","oil-coolers","us1","ws122"],"price":10608,"price_min":10608,"price_max":10608,"available":true,"price_varies":false,"compare_at_price":13600,"compare_at_price_min":13600,"compare_at_price_max":13600,"compare_at_price_varies":false,"variants":[{"id":5990389317659,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOCF-BMW","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Mishimoto BMW E36 E46 Oil Line Fitting Kit - E36 E46 - MMOCF-BMW","public_title":null,"options":["Default Title"],"price":10608,"weight":4177,"compare_at_price":13600,"inventory_quantity":17,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOCF-BMW_dc87dcb0-50fa-432d-a3a6-4835b75229d0.jpg?v=1710154108"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOCF-BMW_dc87dcb0-50fa-432d-a3a6-4835b75229d0.jpg?v=1710154108","options":["Title"],"media":[{"alt":"Mishimoto - Mishimoto BMW E36 E46 Oil Line Fitting Kit - E36 E46 - MMOCF-BMW - Rzcrewgarage","id":1351401635937,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOCF-BMW_dc87dcb0-50fa-432d-a3a6-4835b75229d0.jpg?v=1710154108"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOCF-BMW_dc87dcb0-50fa-432d-a3a6-4835b75229d0.jpg?v=1710154108","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOCF-BMW\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Allows for use of -10AN fittings for custom\u003cbr\u003e100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate\u003cbr\u003eIncludes durable stock\u003cbr\u003eBMW O-rings for leak-free installation\u003cbr\u003eProvides additional engine bay space for applications with an oil accumulator or supercharger setup\u003cbr\u003eIncluded as part of the Mishimoto BMW E46 M3 Oil Cooler Kit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial \u003cbr\u003eFITTING CLAMP MATERIAL\u003cbr\u003e303 Stainless Steel\u003cbr\u003e\u003cbr\u003e-10AN FITTINGS MATERIAL\u003cbr\u003e6061 Aluminum\u003cbr\u003e\u003cbr\u003eNote This kit works with vehicles which have stock oil cooler housings.\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes S54, N54, N55\u003cbr\u003eChassis Codes E36, E46\u003cbr\u003eInstall Torque Specs 10 ft\/lbs for Oil Line Fitting Kit bolt\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eOverall Height 1.3\" \u003cbr\u003eOverall Length 2.44\" \u003cbr\u003eOverall Width 1.51\" (assembled) \u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Fitting Clamp \u003cbr\u003e(2) -10AN Fittings \u003cbr\u003e(2) BMW Oil O-rings \u003cbr\u003e(1) M8 x 1.25 x 25mm Button-Head Bolt \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eInstall a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Pair this fitting kit with some Mishimoto stainless steel oil lines and one of our stacked-plate oil coolers to create a complete cooling setup for your BMW. As with all our products, the Mishimoto BMW Oil Line Fitting Kit includes our Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Allows for use of -10AN fittings for custom\u003cbr\u003e100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate\u003cbr\u003eIncludes durable stock\u003cbr\u003eBMW O-rings for leak-free installation\u003cbr\u003eProvides additional engine bay space for applications with an oil accumulator or supercharger setup\u003cbr\u003eIncluded as part of the Mishimoto BMW E46 M3 Oil Cooler Kit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial \u003cbr\u003eFITTING CLAMP MATERIAL\u003cbr\u003e303 Stainless Steel\u003cbr\u003e\u003cbr\u003e-10AN FITTINGS MATERIAL\u003cbr\u003e6061 Aluminum\u003cbr\u003e\u003cbr\u003eNote This kit works with vehicles which have stock oil cooler housings.\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes S54, N54, N55\u003cbr\u003eChassis Codes E36, E46\u003cbr\u003eInstall Torque Specs 10 ft\/lbs for Oil Line Fitting Kit bolt\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eOverall Height 1.3\" \u003cbr\u003eOverall Length 2.44\" \u003cbr\u003eOverall Width 1.51\" (assembled) \u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Fitting Clamp \u003cbr\u003e(2) -10AN Fittings \u003cbr\u003e(2) BMW Oil O-rings \u003cbr\u003e(1) M8 x 1.25 x 25mm Button-Head Bolt \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eInstall a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Pair this fitting kit with some Mishimoto stainless steel oil lines and one of our stacked-plate oil coolers to create a complete cooling setup for your BMW. As with all our products, the Mishimoto BMW Oil Line Fitting Kit includes our Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561990533147,"title":"Mishimoto - Mishimoto BMW E82 E90 E92 E93 Oil Line Fitting Kit - E82 E90 E92 E93 - MMOCF-BMW","handle":"mishimoto-mishimoto-bmw-e82-e90-e92-e93-oil-line-fitting-kit-e82-e90-e92-e93-mmocf-bmw","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOCF-BMW\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Allows for use of -10AN fittings for custom\u003cbr\u003e100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate\u003cbr\u003eIncludes durable stock\u003cbr\u003eBMW O-rings for leak-free installation\u003cbr\u003eProvides additional engine bay space for applications with an oil accumulator or supercharger setup\u003cbr\u003eIncluded as part of the Mishimoto BMW E46 M3 Oil Cooler Kit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial \u003cbr\u003eFITTING CLAMP MATERIAL\u003cbr\u003e303 Stainless Steel\u003cbr\u003e\u003cbr\u003e-10AN FITTINGS MATERIAL\u003cbr\u003e6061 Aluminum\u003cbr\u003e\u003cbr\u003eNote This kit works with vehicles which have stock oil cooler housings.\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes S54, N54, N55\u003cbr\u003eChassis Codes E82, E90, E92, E93\u003cbr\u003eInstall Torque Specs 10 ft\/lbs for Oil Line Fitting Kit bolt\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eOverall Height 1.3\" \u003cbr\u003eOverall Length 2.44\" \u003cbr\u003eOverall Width 1.51\" (assembled) \u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Fitting Clamp \u003cbr\u003e(2) -10AN Fittings \u003cbr\u003e(2) BMW Oil O-rings \u003cbr\u003e(1) M8 x 1.25 x 25mm Button-Head Bolt \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eInstall a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Pair this fitting kit with some Mishimoto stainless steel oil lines and one of our stacked-plate oil coolers to create a complete cooling setup for your BMW. As with all our products, the Mishimoto BMW Oil Line Fitting Kit includes our Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Allows for use of -10AN fittings for custom\u003cbr\u003e100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate\u003cbr\u003eIncludes durable stock\u003cbr\u003eBMW O-rings for leak-free installation\u003cbr\u003eProvides additional engine bay space for applications with an oil accumulator or supercharger setup\u003cbr\u003eIncluded as part of the Mishimoto BMW E46 M3 Oil Cooler Kit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial \u003cbr\u003eFITTING CLAMP MATERIAL\u003cbr\u003e303 Stainless Steel\u003cbr\u003e\u003cbr\u003e-10AN FITTINGS MATERIAL\u003cbr\u003e6061 Aluminum\u003cbr\u003e\u003cbr\u003eNote This kit works with vehicles which have stock oil cooler housings.\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes S54, N54, N55\u003cbr\u003eChassis Codes E82, E90, E92, E93\u003cbr\u003eInstall Torque Specs 10 ft\/lbs for Oil Line Fitting Kit bolt\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eOverall Height 1.3\" \u003cbr\u003eOverall Length 2.44\" \u003cbr\u003eOverall Width 1.51\" (assembled) \u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Fitting Clamp \u003cbr\u003e(2) -10AN Fittings \u003cbr\u003e(2) BMW Oil O-rings \u003cbr\u003e(1) M8 x 1.25 x 25mm Button-Head Bolt \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eInstall a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Pair this fitting kit with some Mishimoto stainless steel oil lines and one of our stacked-plate oil coolers to create a complete cooling setup for your BMW. As with all our products, the Mishimoto BMW Oil Line Fitting Kit includes our Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:53+08:00","created_at":"2018-01-24T23:24:54+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["1-series-e82-2007-2013-tc-i6","2004","2005","2006","2007","2008","2009","2010","2011","2012","2013","3-series-cabriolet-e93-2004-2011-na-i6","3-series-cabriolet-e93-2007-2013-tc-i6","3-series-coupe-e92-2004-2011-na-i6","3-series-coupe-e92-2007-2013-tc-i6","3-series-e90-2004-2011-na-i6","3-series-e90-2007-2013-tc-i6","bmw","car-specific","cooling","mishimoto","oil-cooler-accessories","oil-coolers","us1","ws122"],"price":10608,"price_min":10608,"price_max":10608,"available":true,"price_varies":false,"compare_at_price":13600,"compare_at_price_min":13600,"compare_at_price_max":13600,"compare_at_price_varies":false,"variants":[{"id":5990387712027,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOCF-BMW","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Mishimoto BMW E82 E90 E92 E93 Oil Line Fitting Kit - E82 E90 E92 E93 - MMOCF-BMW","public_title":null,"options":["Default Title"],"price":10608,"weight":4177,"compare_at_price":13600,"inventory_quantity":17,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOCF-BMW.jpg?v=1710154097"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOCF-BMW.jpg?v=1710154097","options":["Title"],"media":[{"alt":"Mishimoto - Mishimoto BMW E82 E90 E92 E93 Oil Line Fitting Kit - E82 E90 E92 E93 - MMOCF-BMW - Rzcrewgarage","id":1351401144417,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOCF-BMW.jpg?v=1710154097"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOCF-BMW.jpg?v=1710154097","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOCF-BMW\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Allows for use of -10AN fittings for custom\u003cbr\u003e100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate\u003cbr\u003eIncludes durable stock\u003cbr\u003eBMW O-rings for leak-free installation\u003cbr\u003eProvides additional engine bay space for applications with an oil accumulator or supercharger setup\u003cbr\u003eIncluded as part of the Mishimoto BMW E46 M3 Oil Cooler Kit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial \u003cbr\u003eFITTING CLAMP MATERIAL\u003cbr\u003e303 Stainless Steel\u003cbr\u003e\u003cbr\u003e-10AN FITTINGS MATERIAL\u003cbr\u003e6061 Aluminum\u003cbr\u003e\u003cbr\u003eNote This kit works with vehicles which have stock oil cooler housings.\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes S54, N54, N55\u003cbr\u003eChassis Codes E82, E90, E92, E93\u003cbr\u003eInstall Torque Specs 10 ft\/lbs for Oil Line Fitting Kit bolt\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eOverall Height 1.3\" \u003cbr\u003eOverall Length 2.44\" \u003cbr\u003eOverall Width 1.51\" (assembled) \u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Fitting Clamp \u003cbr\u003e(2) -10AN Fittings \u003cbr\u003e(2) BMW Oil O-rings \u003cbr\u003e(1) M8 x 1.25 x 25mm Button-Head Bolt \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eInstall a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Pair this fitting kit with some Mishimoto stainless steel oil lines and one of our stacked-plate oil coolers to create a complete cooling setup for your BMW. As with all our products, the Mishimoto BMW Oil Line Fitting Kit includes our Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Allows for use of -10AN fittings for custom\u003cbr\u003e100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate\u003cbr\u003eIncludes durable stock\u003cbr\u003eBMW O-rings for leak-free installation\u003cbr\u003eProvides additional engine bay space for applications with an oil accumulator or supercharger setup\u003cbr\u003eIncluded as part of the Mishimoto BMW E46 M3 Oil Cooler Kit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial \u003cbr\u003eFITTING CLAMP MATERIAL\u003cbr\u003e303 Stainless Steel\u003cbr\u003e\u003cbr\u003e-10AN FITTINGS MATERIAL\u003cbr\u003e6061 Aluminum\u003cbr\u003e\u003cbr\u003eNote This kit works with vehicles which have stock oil cooler housings.\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes S54, N54, N55\u003cbr\u003eChassis Codes E82, E90, E92, E93\u003cbr\u003eInstall Torque Specs 10 ft\/lbs for Oil Line Fitting Kit bolt\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eOverall Height 1.3\" \u003cbr\u003eOverall Length 2.44\" \u003cbr\u003eOverall Width 1.51\" (assembled) \u003cbr\u003eInlet -10AN\u003cbr\u003eOutlet -10AN\u003cbr\u003ePurchase Includes \u003cbr\u003e(1) Stainless Steel Fitting Clamp \u003cbr\u003e(2) -10AN Fittings \u003cbr\u003e(2) BMW Oil O-rings \u003cbr\u003e(1) M8 x 1.25 x 25mm Button-Head Bolt \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eInstall a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Pair this fitting kit with some Mishimoto stainless steel oil lines and one of our stacked-plate oil coolers to create a complete cooling setup for your BMW. As with all our products, the Mishimoto BMW Oil Line Fitting Kit includes our Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561985912859,"title":"Mishimoto - Mitsubishi Lancer Evolution X Oil Cooler Kit - CZ4A - MMOC-EVO-08","handle":"mishimoto-mitsubishi-lancer-evolution-x-oil-cooler-kit-cz4a-mmoc-evo-08","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-EVO-08\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect-fit application designed specifically for the Mitsubishi Lancer Evolution X\u003cbr\u003eIncludes two 19-row oil coolers run in series for optimum cooling\u003cbr\u003eSpecial engineered mounting brackets also serve as ducting to channel air to coolers\u003cbr\u003eAdapts to thermostatically controlled stock oil housing\u003cbr\u003ePrevents car from going into limp mode under aggressive street or track conditions\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 4B11T\u003cbr\u003eChassis Codes CZ4A\u003cbr\u003ePressure Drop 0 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.8 qt\u003cbr\u003eTemp Difference 10°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets\u003cbr\u003e(2) 19 Row Oil Cooler\u003cbr\u003e(1) 2ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 2ft 1.5in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(2) 90° -10AN Female to Male Swivel Adapter\u003cbr\u003e(1) Straight -10AN Female to Female Adapter\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M18 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new 08+ Mitsubishi Evolution X Oil Cooler Kit. Specially designed for your Evo X, this kit features V-mounted dual oil coolers mounted behind the passenger side foglight with a splitter designed for optimal airflow. The Mishimoto Evolution X Oil Cooler Kit maintains optimum oil temperatures without any drop in pressure and comes with the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect-fit application designed specifically for the Mitsubishi Lancer Evolution X\u003cbr\u003eIncludes two 19-row oil coolers run in series for optimum cooling\u003cbr\u003eSpecial engineered mounting brackets also serve as ducting to channel air to coolers\u003cbr\u003eAdapts to thermostatically controlled stock oil housing\u003cbr\u003ePrevents car from going into limp mode under aggressive street or track conditions\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 4B11T\u003cbr\u003eChassis Codes CZ4A\u003cbr\u003ePressure Drop 0 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.8 qt\u003cbr\u003eTemp Difference 10°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets\u003cbr\u003e(2) 19 Row Oil Cooler\u003cbr\u003e(1) 2ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 2ft 1.5in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(2) 90° -10AN Female to Male Swivel Adapter\u003cbr\u003e(1) Straight -10AN Female to Female Adapter\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M18 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new 08+ Mitsubishi Evolution X Oil Cooler Kit. Specially designed for your Evo X, this kit features V-mounted dual oil coolers mounted behind the passenger side foglight with a splitter designed for optimal airflow. The Mishimoto Evolution X Oil Cooler Kit maintains optimum oil temperatures without any drop in pressure and comes with the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:00+08:00","created_at":"2018-01-24T23:24:00+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","car-specific","cooling","lancer-evolution-x-cz4a-chuki-gsr-jdmmr-2008-2009-tc-4b11-i4","lancer-evolution-x-cz4a-chuki-rs-jdmgsr-2008-2009-tc-4b11-i4","lancer-evolution-x-cz4a-kouki-gsr-jdmmr-2009-2017-tc-4b11-i4","lancer-evolution-x-cz4a-kouki-rs-jdmgsr-2009-2017-tc-4b11-i4","lancer-evolution-x-cz4a-zenki-gsr-jdmmr-2007-2008-tc-4b11-i4","lancer-evolution-x-cz4a-zenki-rs-jdmgsr-2007-2008-tc-4b11-i4","lancer-evolution-x-cz4agsr-jdmmr-2007-2017-tc-4b11-i4","lancer-evolution-x-cz4ars-jdmgsr-2007-2017-tc-4b11-i4","mishimoto","mitsubishi","oil-cooler-kits","oil-coolers","us1","ws112"],"price":88880,"price_min":88880,"price_max":88880,"available":true,"price_varies":false,"compare_at_price":101000,"compare_at_price_min":101000,"compare_at_price_max":101000,"compare_at_price_varies":false,"variants":[{"id":5990381617179,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-EVO-08","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Mitsubishi Lancer Evolution X Oil Cooler Kit - CZ4A - MMOC-EVO-08","public_title":null,"options":["Default Title"],"price":88880,"weight":13299,"compare_at_price":101000,"inventory_quantity":16,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-EVO-08.jpg?v=1710154066"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-EVO-08.jpg?v=1710154066","options":["Title"],"media":[{"alt":"Mishimoto - Mitsubishi Lancer Evolution X Oil Cooler Kit - CZ4A - MMOC-EVO-08 - Rzcrewgarage","id":1351399178337,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-EVO-08.jpg?v=1710154066"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-EVO-08.jpg?v=1710154066","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-EVO-08\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect-fit application designed specifically for the Mitsubishi Lancer Evolution X\u003cbr\u003eIncludes two 19-row oil coolers run in series for optimum cooling\u003cbr\u003eSpecial engineered mounting brackets also serve as ducting to channel air to coolers\u003cbr\u003eAdapts to thermostatically controlled stock oil housing\u003cbr\u003ePrevents car from going into limp mode under aggressive street or track conditions\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 4B11T\u003cbr\u003eChassis Codes CZ4A\u003cbr\u003ePressure Drop 0 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.8 qt\u003cbr\u003eTemp Difference 10°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets\u003cbr\u003e(2) 19 Row Oil Cooler\u003cbr\u003e(1) 2ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 2ft 1.5in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(2) 90° -10AN Female to Male Swivel Adapter\u003cbr\u003e(1) Straight -10AN Female to Female Adapter\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M18 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new 08+ Mitsubishi Evolution X Oil Cooler Kit. Specially designed for your Evo X, this kit features V-mounted dual oil coolers mounted behind the passenger side foglight with a splitter designed for optimal airflow. The Mishimoto Evolution X Oil Cooler Kit maintains optimum oil temperatures without any drop in pressure and comes with the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect-fit application designed specifically for the Mitsubishi Lancer Evolution X\u003cbr\u003eIncludes two 19-row oil coolers run in series for optimum cooling\u003cbr\u003eSpecial engineered mounting brackets also serve as ducting to channel air to coolers\u003cbr\u003eAdapts to thermostatically controlled stock oil housing\u003cbr\u003ePrevents car from going into limp mode under aggressive street or track conditions\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 4B11T\u003cbr\u003eChassis Codes CZ4A\u003cbr\u003ePressure Drop 0 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.8 qt\u003cbr\u003eTemp Difference 10°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets\u003cbr\u003e(2) 19 Row Oil Cooler\u003cbr\u003e(1) 2ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 2ft 1.5in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(2) 90° -10AN Female to Male Swivel Adapter\u003cbr\u003e(1) Straight -10AN Female to Female Adapter\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M18 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new 08+ Mitsubishi Evolution X Oil Cooler Kit. Specially designed for your Evo X, this kit features V-mounted dual oil coolers mounted behind the passenger side foglight with a splitter designed for optimal airflow. The Mishimoto Evolution X Oil Cooler Kit maintains optimum oil temperatures without any drop in pressure and comes with the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561985945627,"title":"Mishimoto - Mitsubishi Lancer Evolution X Oil Cooler Kit, Black - Black - CZ4A - MMOC-EVO-08BK","handle":"mishimoto-mitsubishi-lancer-evolution-x-oil-cooler-kit-black-black-cz4a-mmoc-evo-08bk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-EVO-08BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect-fit application designed specifically for the Mitsubishi Lancer Evolution X\u003cbr\u003eIncludes two 19-row oil coolers run in series for optimum cooling\u003cbr\u003eSpecial engineered mounting brackets also serve as ducting to channel air to coolers\u003cbr\u003eAdapts to thermostatically controlled stock oil housing\u003cbr\u003ePrevents car from going into limp mode under aggressive street or track conditions\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 4B11T\u003cbr\u003eChassis Codes CZ4A\u003cbr\u003ePressure Drop 0 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.8 qt\u003cbr\u003eTemp Difference 10°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets\u003cbr\u003e(2) 19 Row Oil Cooler\u003cbr\u003e(1) 2ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 2ft 1.5in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(2) 90° -10AN Female to Male Swivel Adapter\u003cbr\u003e(1) Straight -10AN Female to Female Adapter\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M18 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new 08+ Mitsubishi Evolution X Oil Cooler Kit. Specially designed for your Evo X, this kit features V-mounted dual oil coolers mounted behind the passenger side foglight with a splitter designed for optimal airflow. The Mishimoto Evolution X Oil Cooler Kit maintains optimum oil temperatures without any drop in pressure and comes with the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect-fit application designed specifically for the Mitsubishi Lancer Evolution X\u003cbr\u003eIncludes two 19-row oil coolers run in series for optimum cooling\u003cbr\u003eSpecial engineered mounting brackets also serve as ducting to channel air to coolers\u003cbr\u003eAdapts to thermostatically controlled stock oil housing\u003cbr\u003ePrevents car from going into limp mode under aggressive street or track conditions\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 4B11T\u003cbr\u003eChassis Codes CZ4A\u003cbr\u003ePressure Drop 0 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.8 qt\u003cbr\u003eTemp Difference 10°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets\u003cbr\u003e(2) 19 Row Oil Cooler\u003cbr\u003e(1) 2ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 2ft 1.5in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(2) 90° -10AN Female to Male Swivel Adapter\u003cbr\u003e(1) Straight -10AN Female to Female Adapter\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M18 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new 08+ Mitsubishi Evolution X Oil Cooler Kit. Specially designed for your Evo X, this kit features V-mounted dual oil coolers mounted behind the passenger side foglight with a splitter designed for optimal airflow. The Mishimoto Evolution X Oil Cooler Kit maintains optimum oil temperatures without any drop in pressure and comes with the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 4 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:01+08:00","created_at":"2018-01-24T23:24:01+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2007","2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","car-specific","cooling","lancer-evolution-x-cz4a-chuki-gsr-jdmmr-2008-2009-tc-4b11-i4","lancer-evolution-x-cz4a-chuki-rs-jdmgsr-2008-2009-tc-4b11-i4","lancer-evolution-x-cz4a-kouki-gsr-jdmmr-2009-2017-tc-4b11-i4","lancer-evolution-x-cz4a-kouki-rs-jdmgsr-2009-2017-tc-4b11-i4","lancer-evolution-x-cz4a-zenki-gsr-jdmmr-2007-2008-tc-4b11-i4","lancer-evolution-x-cz4a-zenki-rs-jdmgsr-2007-2008-tc-4b11-i4","lancer-evolution-x-cz4agsr-jdmmr-2007-2017-tc-4b11-i4","lancer-evolution-x-cz4ars-jdmgsr-2007-2017-tc-4b11-i4","mishimoto","mitsubishi","oil-cooler-kits","oil-coolers","us1","ws112"],"price":88880,"price_min":88880,"price_max":88880,"available":true,"price_varies":false,"compare_at_price":101000,"compare_at_price_min":101000,"compare_at_price_max":101000,"compare_at_price_varies":false,"variants":[{"id":5990381649947,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-EVO-08BK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Mitsubishi Lancer Evolution X Oil Cooler Kit, Black - Black - CZ4A - MMOC-EVO-08BK","public_title":null,"options":["Default Title"],"price":88880,"weight":13026,"compare_at_price":101000,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-EVO-08BK.jpg?v=1710154066"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-EVO-08BK.jpg?v=1710154066","options":["Title"],"media":[{"alt":"Mishimoto - Mitsubishi Lancer Evolution X Oil Cooler Kit, Black - Black - CZ4A - MMOC-EVO-08BK - Rzcrewgarage","id":1351399211105,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-EVO-08BK.jpg?v=1710154066"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-EVO-08BK.jpg?v=1710154066","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-EVO-08BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect-fit application designed specifically for the Mitsubishi Lancer Evolution X\u003cbr\u003eIncludes two 19-row oil coolers run in series for optimum cooling\u003cbr\u003eSpecial engineered mounting brackets also serve as ducting to channel air to coolers\u003cbr\u003eAdapts to thermostatically controlled stock oil housing\u003cbr\u003ePrevents car from going into limp mode under aggressive street or track conditions\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 4B11T\u003cbr\u003eChassis Codes CZ4A\u003cbr\u003ePressure Drop 0 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.8 qt\u003cbr\u003eTemp Difference 10°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets\u003cbr\u003e(2) 19 Row Oil Cooler\u003cbr\u003e(1) 2ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 2ft 1.5in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(2) 90° -10AN Female to Male Swivel Adapter\u003cbr\u003e(1) Straight -10AN Female to Female Adapter\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M18 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new 08+ Mitsubishi Evolution X Oil Cooler Kit. Specially designed for your Evo X, this kit features V-mounted dual oil coolers mounted behind the passenger side foglight with a splitter designed for optimal airflow. The Mishimoto Evolution X Oil Cooler Kit maintains optimum oil temperatures without any drop in pressure and comes with the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect-fit application designed specifically for the Mitsubishi Lancer Evolution X\u003cbr\u003eIncludes two 19-row oil coolers run in series for optimum cooling\u003cbr\u003eSpecial engineered mounting brackets also serve as ducting to channel air to coolers\u003cbr\u003eAdapts to thermostatically controlled stock oil housing\u003cbr\u003ePrevents car from going into limp mode under aggressive street or track conditions\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes 4B11T\u003cbr\u003eChassis Codes CZ4A\u003cbr\u003ePressure Drop 0 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.8 qt\u003cbr\u003eTemp Difference 10°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(4) Application Specific Mounting Brackets\u003cbr\u003e(2) 19 Row Oil Cooler\u003cbr\u003e(1) 2ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 2ft 1.5in Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(2) 90° -10AN Female to Male Swivel Adapter\u003cbr\u003e(1) Straight -10AN Female to Female Adapter\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M18 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new 08+ Mitsubishi Evolution X Oil Cooler Kit. Specially designed for your Evo X, this kit features V-mounted dual oil coolers mounted behind the passenger side foglight with a splitter designed for optimal airflow. The Mishimoto Evolution X Oil Cooler Kit maintains optimum oil temperatures without any drop in pressure and comes with the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 4 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561984733211,"title":"Mishimoto - Nissan 370Z Oil Cooler Kit - Z34 - MMOC-370Z-09","handle":"mishimoto-nissan-370z-oil-cooler-kit-z34-mmoc-370z-09","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-370Z-09\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2009+ Nissan 370Z and 2008+ Infiniti G37 coupe\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote This product does not fit with Nismo front damper. Front damper needs to be removed for installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes VQ37VHR\u003cbr\u003eChassis Codes Z34, V36\u003cbr\u003ePressure Drop 2-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003eTemp Difference 30°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate M20, Silver\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new Nissan 370Z, 2009+ \/ Infiniti G37, 2008+ (Coupe only) Oil Cooler Kit. Specially designed for your Nissan 370Z and Infiniti G37, the Mishimoto 370z oil cooler kit is a direct fit and is beneficial to both manual and automatic applications. Enthusiasts who drive their high-performance cars on or off the track know the importance of keeping their oil temperatures low to prevent damage, or even seizure, of the engine. The Mishimoto Infiniti G37 \/ Nissan 370Z Oil Cooler Kit comes with a Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2009+ Nissan 370Z and 2008+ Infiniti G37 coupe\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote This product does not fit with Nismo front damper. Front damper needs to be removed for installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes VQ37VHR\u003cbr\u003eChassis Codes Z34, V36\u003cbr\u003ePressure Drop 2-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003eTemp Difference 30°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate M20, Silver\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new Nissan 370Z, 2009+ \/ Infiniti G37, 2008+ (Coupe only) Oil Cooler Kit. Specially designed for your Nissan 370Z and Infiniti G37, the Mishimoto 370z oil cooler kit is a direct fit and is beneficial to both manual and automatic applications. Enthusiasts who drive their high-performance cars on or off the track know the importance of keeping their oil temperatures low to prevent damage, or even seizure, of the engine. The Mishimoto Infiniti G37 \/ Nissan 370Z Oil Cooler Kit comes with a Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:23:55+08:00","created_at":"2018-01-24T23:23:55+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","car-specific","cooling","fairlady-z-z34-kouki-2012-2018-na-vq37vhr-v6","fairlady-z-z34-zenki-2008-2012-na-vq37vhr-v6","mishimoto","nissan","oil-cooler-kits","oil-coolers","us1","ws112"],"price":85976,"price_min":85976,"price_max":85976,"available":true,"price_varies":false,"compare_at_price":97700,"compare_at_price_min":97700,"compare_at_price_max":97700,"compare_at_price_varies":false,"variants":[{"id":5990380437531,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-370Z-09","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Nissan 370Z Oil Cooler Kit - Z34 - MMOC-370Z-09","public_title":null,"options":["Default Title"],"price":85976,"weight":9897,"compare_at_price":97700,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-370Z-09.jpg?v=1710154063"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-370Z-09.jpg?v=1710154063","options":["Title"],"media":[{"alt":"Mishimoto - Nissan 370Z Oil Cooler Kit - Z34 - MMOC-370Z-09 - Rzcrewgarage","id":1351398981729,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-370Z-09.jpg?v=1710154063"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-370Z-09.jpg?v=1710154063","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-370Z-09\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2009+ Nissan 370Z and 2008+ Infiniti G37 coupe\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote This product does not fit with Nismo front damper. Front damper needs to be removed for installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes VQ37VHR\u003cbr\u003eChassis Codes Z34, V36\u003cbr\u003ePressure Drop 2-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003eTemp Difference 30°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate M20, Silver\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new Nissan 370Z, 2009+ \/ Infiniti G37, 2008+ (Coupe only) Oil Cooler Kit. Specially designed for your Nissan 370Z and Infiniti G37, the Mishimoto 370z oil cooler kit is a direct fit and is beneficial to both manual and automatic applications. Enthusiasts who drive their high-performance cars on or off the track know the importance of keeping their oil temperatures low to prevent damage, or even seizure, of the engine. The Mishimoto Infiniti G37 \/ Nissan 370Z Oil Cooler Kit comes with a Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2009+ Nissan 370Z and 2008+ Infiniti G37 coupe\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote This product does not fit with Nismo front damper. Front damper needs to be removed for installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes VQ37VHR\u003cbr\u003eChassis Codes Z34, V36\u003cbr\u003ePressure Drop 2-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003eTemp Difference 30°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate M20, Silver\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new Nissan 370Z, 2009+ \/ Infiniti G37, 2008+ (Coupe only) Oil Cooler Kit. Specially designed for your Nissan 370Z and Infiniti G37, the Mishimoto 370z oil cooler kit is a direct fit and is beneficial to both manual and automatic applications. Enthusiasts who drive their high-performance cars on or off the track know the importance of keeping their oil temperatures low to prevent damage, or even seizure, of the engine. The Mishimoto Infiniti G37 \/ Nissan 370Z Oil Cooler Kit comes with a Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561984765979,"title":"Mishimoto - Nissan 370Z Oil Cooler Kit, Black - Black - Z34 - MMOC-370Z-09BK","handle":"mishimoto-nissan-370z-oil-cooler-kit-black-black-z34-mmoc-370z-09bk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-370Z-09BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2009+ Nissan 370Z and 2008+ Infiniti G37 coupe\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote This product does not fit with Nismo front damper. Front damper needs to be removed for installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes VQ37VHR\u003cbr\u003eChassis Codes Z34, V36\u003cbr\u003ePressure Drop 2-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003eTemp Difference 30°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate M20, Silver\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new Nissan 370Z, 2009+ \/ Infiniti G37, 2008+ (Coupe only) Oil Cooler Kit. Specially designed for your Nissan 370Z and Infiniti G37, the Mishimoto 370z oil cooler kit is a direct fit and is beneficial to both manual and automatic applications. Enthusiasts who drive their high-performance cars on or off the track know the importance of keeping their oil temperatures low to prevent damage, or even seizure, of the engine. The Mishimoto Infiniti G37 \/ Nissan 370Z Oil Cooler Kit comes with a Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2009+ Nissan 370Z and 2008+ Infiniti G37 coupe\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote This product does not fit with Nismo front damper. Front damper needs to be removed for installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes VQ37VHR\u003cbr\u003eChassis Codes Z34, V36\u003cbr\u003ePressure Drop 2-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003eTemp Difference 30°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate M20, Silver\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new Nissan 370Z, 2009+ \/ Infiniti G37, 2008+ (Coupe only) Oil Cooler Kit. Specially designed for your Nissan 370Z and Infiniti G37, the Mishimoto 370z oil cooler kit is a direct fit and is beneficial to both manual and automatic applications. Enthusiasts who drive their high-performance cars on or off the track know the importance of keeping their oil temperatures low to prevent damage, or even seizure, of the engine. The Mishimoto Infiniti G37 \/ Nissan 370Z Oil Cooler Kit comes with a Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 5 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:23:56+08:00","created_at":"2018-01-24T23:23:56+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","car-specific","cooling","fairlady-z-z34-kouki-2012-2018-na-vq37vhr-v6","fairlady-z-z34-zenki-2008-2012-na-vq37vhr-v6","mishimoto","nissan","oil-cooler-kits","oil-coolers","us1","ws112"],"price":85976,"price_min":85976,"price_max":85976,"available":true,"price_varies":false,"compare_at_price":97700,"compare_at_price_min":97700,"compare_at_price_max":97700,"compare_at_price_varies":false,"variants":[{"id":5990380470299,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-370Z-09BK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Nissan 370Z Oil Cooler Kit, Black - Black - Z34 - MMOC-370Z-09BK","public_title":null,"options":["Default Title"],"price":85976,"weight":9806,"compare_at_price":97700,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-370Z-09BK.jpg?v=1710154063"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-370Z-09BK.jpg?v=1710154063","options":["Title"],"media":[{"alt":"Mishimoto - Nissan 370Z Oil Cooler Kit, Black - Black - Z34 - MMOC-370Z-09BK - Rzcrewgarage","id":1351399014497,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-370Z-09BK.jpg?v=1710154063"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-370Z-09BK.jpg?v=1710154063","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-370Z-09BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2009+ Nissan 370Z and 2008+ Infiniti G37 coupe\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote This product does not fit with Nismo front damper. Front damper needs to be removed for installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes VQ37VHR\u003cbr\u003eChassis Codes Z34, V36\u003cbr\u003ePressure Drop 2-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003eTemp Difference 30°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate M20, Silver\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new Nissan 370Z, 2009+ \/ Infiniti G37, 2008+ (Coupe only) Oil Cooler Kit. Specially designed for your Nissan 370Z and Infiniti G37, the Mishimoto 370z oil cooler kit is a direct fit and is beneficial to both manual and automatic applications. Enthusiasts who drive their high-performance cars on or off the track know the importance of keeping their oil temperatures low to prevent damage, or even seizure, of the engine. The Mishimoto Infiniti G37 \/ Nissan 370Z Oil Cooler Kit comes with a Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2009+ Nissan 370Z and 2008+ Infiniti G37 coupe\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote This product does not fit with Nismo front damper. Front damper needs to be removed for installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes VQ37VHR\u003cbr\u003eChassis Codes Z34, V36\u003cbr\u003ePressure Drop 2-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003eTemp Difference 30°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate M20, Silver\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new Nissan 370Z, 2009+ \/ Infiniti G37, 2008+ (Coupe only) Oil Cooler Kit. Specially designed for your Nissan 370Z and Infiniti G37, the Mishimoto 370z oil cooler kit is a direct fit and is beneficial to both manual and automatic applications. Enthusiasts who drive their high-performance cars on or off the track know the importance of keeping their oil temperatures low to prevent damage, or even seizure, of the engine. The Mishimoto Infiniti G37 \/ Nissan 370Z Oil Cooler Kit comes with a Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 5 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561984798747,"title":"Mishimoto - Nissan 370Z Thermostatic Oil Cooler Kit - Z34 - MMOC-370Z-09T","handle":"mishimoto-nissan-370z-thermostatic-oil-cooler-kit-z34-mmoc-370z-09t","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-370Z-09T\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2009+ Nissan 370Z and 2008+ Infiniti G37 coupe\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote This product does not fit with Nismo front damper. Front damper needs to be removed for installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes VQ37VHR\u003cbr\u003eChassis Codes Z34, V36\u003cbr\u003ePressure Drop 2-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003eTemp Difference 30°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate M20, Silver\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new Nissan 370Z, 2009+ \/ Infiniti G37, 2008+ (Coupe only) Oil Cooler Kit. Specially designed for your Nissan 370Z and Infiniti G37, the Mishimoto 370z oil cooler kit is a direct fit and is beneficial to both manual and automatic applications. Enthusiasts who drive their high-performance cars on or off the track know the importance of keeping their oil temperatures low to prevent damage, or even seizure, of the engine. The Mishimoto Infiniti G37 \/ Nissan 370Z Oil Cooler Kit comes with a Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2009+ Nissan 370Z and 2008+ Infiniti G37 coupe\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote This product does not fit with Nismo front damper. Front damper needs to be removed for installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes VQ37VHR\u003cbr\u003eChassis Codes Z34, V36\u003cbr\u003ePressure Drop 2-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003eTemp Difference 30°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate M20, Silver\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new Nissan 370Z, 2009+ \/ Infiniti G37, 2008+ (Coupe only) Oil Cooler Kit. Specially designed for your Nissan 370Z and Infiniti G37, the Mishimoto 370z oil cooler kit is a direct fit and is beneficial to both manual and automatic applications. Enthusiasts who drive their high-performance cars on or off the track know the importance of keeping their oil temperatures low to prevent damage, or even seizure, of the engine. The Mishimoto Infiniti G37 \/ Nissan 370Z Oil Cooler Kit comes with a Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:23:56+08:00","created_at":"2018-01-24T23:23:57+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","car-specific","cooling","fairlady-z-z34-kouki-2012-2018-na-vq37vhr-v6","fairlady-z-z34-zenki-2008-2012-na-vq37vhr-v6","mishimoto","nissan","oil-cooler-kits","oil-coolers","us1","ws111"],"price":92471,"price_min":92471,"price_max":92471,"available":true,"price_varies":false,"compare_at_price":103900,"compare_at_price_min":103900,"compare_at_price_max":103900,"compare_at_price_varies":false,"variants":[{"id":5990380503067,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-370Z-09T","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Nissan 370Z Thermostatic Oil Cooler Kit - Z34 - MMOC-370Z-09T","public_title":null,"options":["Default Title"],"price":92471,"weight":10033,"compare_at_price":103900,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-370Z-09T.jpg?v=1710154063"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-370Z-09T.jpg?v=1710154063","options":["Title"],"media":[{"alt":"Mishimoto - Nissan 370Z Thermostatic Oil Cooler Kit - Z34 - MMOC-370Z-09T - Rzcrewgarage","id":1351399047265,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-370Z-09T.jpg?v=1710154063"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-370Z-09T.jpg?v=1710154063","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-370Z-09T\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2009+ Nissan 370Z and 2008+ Infiniti G37 coupe\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote This product does not fit with Nismo front damper. Front damper needs to be removed for installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes VQ37VHR\u003cbr\u003eChassis Codes Z34, V36\u003cbr\u003ePressure Drop 2-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003eTemp Difference 30°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate M20, Silver\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new Nissan 370Z, 2009+ \/ Infiniti G37, 2008+ (Coupe only) Oil Cooler Kit. Specially designed for your Nissan 370Z and Infiniti G37, the Mishimoto 370z oil cooler kit is a direct fit and is beneficial to both manual and automatic applications. Enthusiasts who drive their high-performance cars on or off the track know the importance of keeping their oil temperatures low to prevent damage, or even seizure, of the engine. The Mishimoto Infiniti G37 \/ Nissan 370Z Oil Cooler Kit comes with a Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2009+ Nissan 370Z and 2008+ Infiniti G37 coupe\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote This product does not fit with Nismo front damper. Front damper needs to be removed for installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes VQ37VHR\u003cbr\u003eChassis Codes Z34, V36\u003cbr\u003ePressure Drop 2-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003eTemp Difference 30°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate M20, Silver\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new Nissan 370Z, 2009+ \/ Infiniti G37, 2008+ (Coupe only) Oil Cooler Kit. Specially designed for your Nissan 370Z and Infiniti G37, the Mishimoto 370z oil cooler kit is a direct fit and is beneficial to both manual and automatic applications. Enthusiasts who drive their high-performance cars on or off the track know the importance of keeping their oil temperatures low to prevent damage, or even seizure, of the engine. The Mishimoto Infiniti G37 \/ Nissan 370Z Oil Cooler Kit comes with a Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561985814555,"title":"Mishimoto - Nissan 370Z Thermostatic Oil Cooler Kit, Black - Black - Z34 - MMOC-370Z-09TBK","handle":"mishimoto-nissan-370z-thermostatic-oil-cooler-kit-black-black-z34-mmoc-370z-09tbk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-370Z-09TBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2009+ Nissan 370Z and 2008+ Infiniti G37 coupe\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote This product does not fit with Nismo front damper. Front damper needs to be removed for installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes VQ37VHR\u003cbr\u003eChassis Codes Z34, V36\u003cbr\u003ePressure Drop 2-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003eTemp Difference 30°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate M20, Silver\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new Nissan 370Z, 2009+ \/ Infiniti G37, 2008+ (Coupe only) Oil Cooler Kit. Specially designed for your Nissan 370Z and Infiniti G37, the Mishimoto 370z oil cooler kit is a direct fit and is beneficial to both manual and automatic applications. Enthusiasts who drive their high-performance cars on or off the track know the importance of keeping their oil temperatures low to prevent damage, or even seizure, of the engine. The Mishimoto Infiniti G37 \/ Nissan 370Z Oil Cooler Kit comes with a Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2009+ Nissan 370Z and 2008+ Infiniti G37 coupe\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote This product does not fit with Nismo front damper. Front damper needs to be removed for installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes VQ37VHR\u003cbr\u003eChassis Codes Z34, V36\u003cbr\u003ePressure Drop 2-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003eTemp Difference 30°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate M20, Silver\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new Nissan 370Z, 2009+ \/ Infiniti G37, 2008+ (Coupe only) Oil Cooler Kit. Specially designed for your Nissan 370Z and Infiniti G37, the Mishimoto 370z oil cooler kit is a direct fit and is beneficial to both manual and automatic applications. Enthusiasts who drive their high-performance cars on or off the track know the importance of keeping their oil temperatures low to prevent damage, or even seizure, of the engine. The Mishimoto Infiniti G37 \/ Nissan 370Z Oil Cooler Kit comes with a Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:23:57+08:00","created_at":"2018-01-24T23:23:58+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2008","2009","2010","2011","2012","2013","2014","2015","2016","2017","2018","car-specific","cooling","fairlady-z-z34-kouki-2012-2018-na-vq37vhr-v6","fairlady-z-z34-zenki-2008-2012-na-vq37vhr-v6","mishimoto","nissan","oil-cooler-kits","oil-coolers","us1","ws111"],"price":92471,"price_min":92471,"price_max":92471,"available":true,"price_varies":false,"compare_at_price":103900,"compare_at_price_min":103900,"compare_at_price_max":103900,"compare_at_price_varies":false,"variants":[{"id":5990381518875,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-370Z-09TBK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Nissan 370Z Thermostatic Oil Cooler Kit, Black - Black - Z34 - MMOC-370Z-09TBK","public_title":null,"options":["Default Title"],"price":92471,"weight":9897,"compare_at_price":103900,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-370Z-09TBK.jpg?v=1710154066"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-370Z-09TBK.jpg?v=1710154066","options":["Title"],"media":[{"alt":"Mishimoto - Nissan 370Z Thermostatic Oil Cooler Kit, Black - Black - Z34 - MMOC-370Z-09TBK - Rzcrewgarage","id":1351399080033,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-370Z-09TBK.jpg?v=1710154066"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-370Z-09TBK.jpg?v=1710154066","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-370Z-09TBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2009+ Nissan 370Z and 2008+ Infiniti G37 coupe\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote This product does not fit with Nismo front damper. Front damper needs to be removed for installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes VQ37VHR\u003cbr\u003eChassis Codes Z34, V36\u003cbr\u003ePressure Drop 2-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003eTemp Difference 30°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate M20, Silver\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new Nissan 370Z, 2009+ \/ Infiniti G37, 2008+ (Coupe only) Oil Cooler Kit. Specially designed for your Nissan 370Z and Infiniti G37, the Mishimoto 370z oil cooler kit is a direct fit and is beneficial to both manual and automatic applications. Enthusiasts who drive their high-performance cars on or off the track know the importance of keeping their oil temperatures low to prevent damage, or even seizure, of the engine. The Mishimoto Infiniti G37 \/ Nissan 370Z Oil Cooler Kit comes with a Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2009+ Nissan 370Z and 2008+ Infiniti G37 coupe\u003cbr\u003eApplication-specific mounting brackets\u003cbr\u003ePremade braided stainless steel oil lines with durable –AN fittings\u003cbr\u003eBillet aluminum oil sandwich plate in standard or thermostatic form\u003cbr\u003e19-row stacked-plate oil cooler for optimal fluid temperature reduction\u003cbr\u003eMishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler Construction Stacked-plate \u003cbr\u003eNote This product does not fit with Nismo front damper. Front damper needs to be removed for installation.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes VQ37VHR\u003cbr\u003eChassis Codes Z34, V36\u003cbr\u003ePressure Drop 2-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. \u003cbr\u003eIncrease In Oil Capacity 0.65\u003cbr\u003eTemp Difference 30°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) 5ft Stainless Steel Braided Hose w\/ -10AN Fittings\u003cbr\u003e(1) Oil Sandwich Plate M20, Silver\u003cbr\u003e(1) Stainless Steel Sandwich Plate Adapter, M20\u003cbr\u003e(2) Banjo Fitting w\/ Bolt M20 x -10AN, Black\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eMishimoto proudly announces the all-new Nissan 370Z, 2009+ \/ Infiniti G37, 2008+ (Coupe only) Oil Cooler Kit. Specially designed for your Nissan 370Z and Infiniti G37, the Mishimoto 370z oil cooler kit is a direct fit and is beneficial to both manual and automatic applications. Enthusiasts who drive their high-performance cars on or off the track know the importance of keeping their oil temperatures low to prevent damage, or even seizure, of the engine. The Mishimoto Infiniti G37 \/ Nissan 370Z Oil Cooler Kit comes with a Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":562200018971,"title":"Mishimoto - Subaru WRX Oil Cooler Kit - GE GH - MMOC-WRX-08","handle":"mishimoto-subaru-wrx-oil-cooler-kit-ge-gh-mmoc-wrx-08","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-08\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2008-2014 Subaru WRX\u003cbr\u003eProven +25°F (+13.9°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation, functions with all stock equipment\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined application-specific sandwich plate\u003cbr\u003eWorks in conjunction with stock liquid-to-liquid heat exchanger for proper fluid warm-up and regulation\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ255\u003cbr\u003eChassis Codes GH, GE, GR, GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 50°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets and Spacer\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 45-degree and 90-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) 15mm CNC Sandwich Plate Spacer\u003cbr\u003e(1) Application specific M20 Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eHigh oil temperatures can wreak havoc on your high-performance flat four. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2008-2014 Subaru WRX. The WRX has a lot to offer with its turbocharged engine and fantastic AWD system, but these vehicles are not factory-equipped with an oil cooler. Properly regulated oil temperatures become even more important if you have modified your vehicle or spend time tracking your WRX. \u003cbr\u003e\u003cbr\u003eMishimoto's direct-fit oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included CNC-machined aluminum spacer provides ample room for our oil sandwich plate, making this kit compatible with the factory exhaust manifold heat shields. This kit includes preassembled stainless steel lines with -10AN fittings and a thermal reflective wrap that deflects radiant heat from the exhaust. With this setup, your WRX can achieve a 50+°F (34+°C) drop in oil temperatures with minimal pressure loss. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru WRX Oil Cooler Kit is available with a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate, for even greater control over your oil temperatures. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2008-2014 Subaru WRX\u003cbr\u003eProven +25°F (+13.9°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation, functions with all stock equipment\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined application-specific sandwich plate\u003cbr\u003eWorks in conjunction with stock liquid-to-liquid heat exchanger for proper fluid warm-up and regulation\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ255\u003cbr\u003eChassis Codes GH, GE, GR, GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 50°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets and Spacer\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 45-degree and 90-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) 15mm CNC Sandwich Plate Spacer\u003cbr\u003e(1) Application specific M20 Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eHigh oil temperatures can wreak havoc on your high-performance flat four. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2008-2014 Subaru WRX. The WRX has a lot to offer with its turbocharged engine and fantastic AWD system, but these vehicles are not factory-equipped with an oil cooler. Properly regulated oil temperatures become even more important if you have modified your vehicle or spend time tracking your WRX. \u003cbr\u003e\u003cbr\u003eMishimoto's direct-fit oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included CNC-machined aluminum spacer provides ample room for our oil sandwich plate, making this kit compatible with the factory exhaust manifold heat shields. This kit includes preassembled stainless steel lines with -10AN fittings and a thermal reflective wrap that deflects radiant heat from the exhaust. With this setup, your WRX can achieve a 50+°F (34+°C) drop in oil temperatures with minimal pressure loss. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru WRX Oil Cooler Kit is available with a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate, for even greater control over your oil temperatures. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-25T00:19:21+08:00","created_at":"2018-01-25T00:19:22+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2008","2009","2010","2011","2012","2013","2014","car-specific","cooling","impreza-wrx-hatch-gh6-applied-e-2008-2014-tc-ej255-h4","impreza-wrx-sedan-ge6-applied-e-2008-2014-tc-ej255-h4","mishimoto","oil-cooler-kits","oil-coolers","subaru","us1","ws112"],"price":78848,"price_min":78848,"price_max":78848,"available":true,"price_varies":false,"compare_at_price":89600,"compare_at_price_min":89600,"compare_at_price_max":89600,"compare_at_price_varies":false,"variants":[{"id":5990720503835,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-WRX-08","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX Oil Cooler Kit - GE GH - MMOC-WRX-08","public_title":null,"options":["Default Title"],"price":78848,"weight":9171,"compare_at_price":89600,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-08_96b7e8fa-c766-4c94-80d4-09544cfbb6da.jpg?v=1710154206"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-08_96b7e8fa-c766-4c94-80d4-09544cfbb6da.jpg?v=1710154206","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX Oil Cooler Kit - GE GH - MMOC-WRX-08 - Rzcrewgarage","id":1351399899233,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-08_96b7e8fa-c766-4c94-80d4-09544cfbb6da.jpg?v=1710154206"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-08_96b7e8fa-c766-4c94-80d4-09544cfbb6da.jpg?v=1710154206","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-08\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2008-2014 Subaru WRX\u003cbr\u003eProven +25°F (+13.9°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation, functions with all stock equipment\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined application-specific sandwich plate\u003cbr\u003eWorks in conjunction with stock liquid-to-liquid heat exchanger for proper fluid warm-up and regulation\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ255\u003cbr\u003eChassis Codes GH, GE, GR, GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 50°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets and Spacer\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 45-degree and 90-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) 15mm CNC Sandwich Plate Spacer\u003cbr\u003e(1) Application specific M20 Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eHigh oil temperatures can wreak havoc on your high-performance flat four. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2008-2014 Subaru WRX. The WRX has a lot to offer with its turbocharged engine and fantastic AWD system, but these vehicles are not factory-equipped with an oil cooler. Properly regulated oil temperatures become even more important if you have modified your vehicle or spend time tracking your WRX. \u003cbr\u003e\u003cbr\u003eMishimoto's direct-fit oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included CNC-machined aluminum spacer provides ample room for our oil sandwich plate, making this kit compatible with the factory exhaust manifold heat shields. This kit includes preassembled stainless steel lines with -10AN fittings and a thermal reflective wrap that deflects radiant heat from the exhaust. With this setup, your WRX can achieve a 50+°F (34+°C) drop in oil temperatures with minimal pressure loss. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru WRX Oil Cooler Kit is available with a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate, for even greater control over your oil temperatures. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2008-2014 Subaru WRX\u003cbr\u003eProven +25°F (+13.9°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation, functions with all stock equipment\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined application-specific sandwich plate\u003cbr\u003eWorks in conjunction with stock liquid-to-liquid heat exchanger for proper fluid warm-up and regulation\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ255\u003cbr\u003eChassis Codes GH, GE, GR, GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 50°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets and Spacer\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 45-degree and 90-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) 15mm CNC Sandwich Plate Spacer\u003cbr\u003e(1) Application specific M20 Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eHigh oil temperatures can wreak havoc on your high-performance flat four. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2008-2014 Subaru WRX. The WRX has a lot to offer with its turbocharged engine and fantastic AWD system, but these vehicles are not factory-equipped with an oil cooler. Properly regulated oil temperatures become even more important if you have modified your vehicle or spend time tracking your WRX. \u003cbr\u003e\u003cbr\u003eMishimoto's direct-fit oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included CNC-machined aluminum spacer provides ample room for our oil sandwich plate, making this kit compatible with the factory exhaust manifold heat shields. This kit includes preassembled stainless steel lines with -10AN fittings and a thermal reflective wrap that deflects radiant heat from the exhaust. With this setup, your WRX can achieve a 50+°F (34+°C) drop in oil temperatures with minimal pressure loss. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru WRX Oil Cooler Kit is available with a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate, for even greater control over your oil temperatures. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":562200051739,"title":"Mishimoto - Subaru WRX Oil Cooler Kit, Black - Black - GE GH - MMOC-WRX-08BK","handle":"mishimoto-subaru-wrx-oil-cooler-kit-black-black-ge-gh-mmoc-wrx-08bk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-08BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2008-2014 Subaru WRX\u003cbr\u003eProven +25°F (+13.9°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation, functions with all stock equipment\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined application-specific sandwich plate\u003cbr\u003eWorks in conjunction with stock liquid-to-liquid heat exchanger for proper fluid warm-up and regulation\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ255\u003cbr\u003eChassis Codes GH, GE, GR, GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 50°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets and Spacer\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 45-degree and 90-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) 15mm CNC Sandwich Plate Spacer\u003cbr\u003e(1) Application specific M20 Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eHigh oil temperatures can wreak havoc on your high-performance flat four. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2008-2014 Subaru WRX. The WRX has a lot to offer with its turbocharged engine and fantastic AWD system, but these vehicles are not factory-equipped with an oil cooler. Properly regulated oil temperatures become even more important if you have modified your vehicle or spend time tracking your WRX. \u003cbr\u003e\u003cbr\u003eMishimoto's direct-fit oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included CNC-machined aluminum spacer provides ample room for our oil sandwich plate, making this kit compatible with the factory exhaust manifold heat shields. This kit includes preassembled stainless steel lines with -10AN fittings and a thermal reflective wrap that deflects radiant heat from the exhaust. With this setup, your WRX can achieve a 50+°F (34+°C) drop in oil temperatures with minimal pressure loss. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru WRX Oil Cooler Kit is available with a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate, for even greater control over your oil temperatures. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2008-2014 Subaru WRX\u003cbr\u003eProven +25°F (+13.9°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation, functions with all stock equipment\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined application-specific sandwich plate\u003cbr\u003eWorks in conjunction with stock liquid-to-liquid heat exchanger for proper fluid warm-up and regulation\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ255\u003cbr\u003eChassis Codes GH, GE, GR, GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 50°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets and Spacer\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 45-degree and 90-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) 15mm CNC Sandwich Plate Spacer\u003cbr\u003e(1) Application specific M20 Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eHigh oil temperatures can wreak havoc on your high-performance flat four. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2008-2014 Subaru WRX. The WRX has a lot to offer with its turbocharged engine and fantastic AWD system, but these vehicles are not factory-equipped with an oil cooler. Properly regulated oil temperatures become even more important if you have modified your vehicle or spend time tracking your WRX. \u003cbr\u003e\u003cbr\u003eMishimoto's direct-fit oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included CNC-machined aluminum spacer provides ample room for our oil sandwich plate, making this kit compatible with the factory exhaust manifold heat shields. This kit includes preassembled stainless steel lines with -10AN fittings and a thermal reflective wrap that deflects radiant heat from the exhaust. With this setup, your WRX can achieve a 50+°F (34+°C) drop in oil temperatures with minimal pressure loss. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru WRX Oil Cooler Kit is available with a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate, for even greater control over your oil temperatures. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-25T00:19:22+08:00","created_at":"2018-01-25T00:19:23+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2008","2009","2010","2011","2012","2013","2014","car-specific","cooling","impreza-wrx-hatch-gh6-applied-e-2008-2014-tc-ej255-h4","impreza-wrx-sedan-ge6-applied-e-2008-2014-tc-ej255-h4","mishimoto","oil-cooler-kits","oil-coolers","subaru","us1","ws112"],"price":78848,"price_min":78848,"price_max":78848,"available":true,"price_varies":false,"compare_at_price":89600,"compare_at_price_min":89600,"compare_at_price_max":89600,"compare_at_price_varies":false,"variants":[{"id":5990720536603,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-WRX-08BK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX Oil Cooler Kit, Black - Black - GE GH - MMOC-WRX-08BK","public_title":null,"options":["Default Title"],"price":78848,"weight":9035,"compare_at_price":89600,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-08BK_6fb952c2-b199-4fe6-82e7-3b81b6e00b8e.jpg?v=1710154206"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-08BK_6fb952c2-b199-4fe6-82e7-3b81b6e00b8e.jpg?v=1710154206","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX Oil Cooler Kit, Black - Black - GE GH - MMOC-WRX-08BK - Rzcrewgarage","id":1351399932001,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-08BK_6fb952c2-b199-4fe6-82e7-3b81b6e00b8e.jpg?v=1710154206"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-08BK_6fb952c2-b199-4fe6-82e7-3b81b6e00b8e.jpg?v=1710154206","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-08BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2008-2014 Subaru WRX\u003cbr\u003eProven +25°F (+13.9°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation, functions with all stock equipment\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined application-specific sandwich plate\u003cbr\u003eWorks in conjunction with stock liquid-to-liquid heat exchanger for proper fluid warm-up and regulation\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ255\u003cbr\u003eChassis Codes GH, GE, GR, GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 50°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets and Spacer\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 45-degree and 90-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) 15mm CNC Sandwich Plate Spacer\u003cbr\u003e(1) Application specific M20 Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eHigh oil temperatures can wreak havoc on your high-performance flat four. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2008-2014 Subaru WRX. The WRX has a lot to offer with its turbocharged engine and fantastic AWD system, but these vehicles are not factory-equipped with an oil cooler. Properly regulated oil temperatures become even more important if you have modified your vehicle or spend time tracking your WRX. \u003cbr\u003e\u003cbr\u003eMishimoto's direct-fit oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included CNC-machined aluminum spacer provides ample room for our oil sandwich plate, making this kit compatible with the factory exhaust manifold heat shields. This kit includes preassembled stainless steel lines with -10AN fittings and a thermal reflective wrap that deflects radiant heat from the exhaust. With this setup, your WRX can achieve a 50+°F (34+°C) drop in oil temperatures with minimal pressure loss. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru WRX Oil Cooler Kit is available with a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate, for even greater control over your oil temperatures. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2008-2014 Subaru WRX\u003cbr\u003eProven +25°F (+13.9°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation, functions with all stock equipment\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined application-specific sandwich plate\u003cbr\u003eWorks in conjunction with stock liquid-to-liquid heat exchanger for proper fluid warm-up and regulation\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ255\u003cbr\u003eChassis Codes GH, GE, GR, GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 50°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets and Spacer\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 45-degree and 90-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) 15mm CNC Sandwich Plate Spacer\u003cbr\u003e(1) Application specific M20 Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eHigh oil temperatures can wreak havoc on your high-performance flat four. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2008-2014 Subaru WRX. The WRX has a lot to offer with its turbocharged engine and fantastic AWD system, but these vehicles are not factory-equipped with an oil cooler. Properly regulated oil temperatures become even more important if you have modified your vehicle or spend time tracking your WRX. \u003cbr\u003e\u003cbr\u003eMishimoto's direct-fit oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included CNC-machined aluminum spacer provides ample room for our oil sandwich plate, making this kit compatible with the factory exhaust manifold heat shields. This kit includes preassembled stainless steel lines with -10AN fittings and a thermal reflective wrap that deflects radiant heat from the exhaust. With this setup, your WRX can achieve a 50+°F (34+°C) drop in oil temperatures with minimal pressure loss. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru WRX Oil Cooler Kit is available with a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate, for even greater control over your oil temperatures. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561986207771,"title":"Mishimoto - Subaru WRX STI Oil Cooler Kit - GRB GVB GRF GVF - MMOC-STI-08","handle":"mishimoto-subaru-wrx-sti-oil-cooler-kit-grb-gvb-grf-gvf-mmoc-sti-08","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-STI-08\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 5 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:07+08:00","created_at":"2018-01-24T23:24:07+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2007","2008","2009","2010","2011","2012","2013","2014","car-specific","cooling","impreza-wrx-sti-a-line-grf-applied-b-2009-2009-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-c-2007-2012-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-c-2010-2012-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-grb-applied-a-2007-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-b-2009-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-c-2010-2012-tc-ej207-h4","impreza-wrx-sti-grb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-grb-applied-e-2013-2014-tc-ej207-h4","impreza-wrx-sti-gvb-applied-c-2007-2012-tc-ej207-h4","impreza-wrx-sti-gvb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-gvb-applied-e-2013-2014-tc-ej207-h4","mishimoto","oil-cooler-kits","oil-coolers","subaru","us1","ws112"],"price":73216,"price_min":73216,"price_max":73216,"available":true,"price_varies":false,"compare_at_price":83200,"compare_at_price_min":83200,"compare_at_price_max":83200,"compare_at_price_varies":false,"variants":[{"id":5990382862363,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-STI-08","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX STI Oil Cooler Kit - GRB GVB GRF GVF - MMOC-STI-08","public_title":null,"options":["Default Title"],"price":73216,"weight":8990,"compare_at_price":83200,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08.jpg?v=1710154075"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08.jpg?v=1710154075","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX STI Oil Cooler Kit - GRB GVB GRF GVF - MMOC-STI-08 - Rzcrewgarage","id":1351399440481,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08.jpg?v=1710154075"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08.jpg?v=1710154075","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-STI-08\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 5 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561986240539,"title":"Mishimoto - Subaru WRX STI Oil Cooler Kit, Black - Black - GRB GVB GRF GVF - MMOC-STI-08BK","handle":"mishimoto-subaru-wrx-sti-oil-cooler-kit-black-black-grb-gvb-grf-gvf-mmoc-sti-08bk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-STI-08BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:08+08:00","created_at":"2018-01-24T23:24:08+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2007","2008","2009","2010","2011","2012","2013","2014","car-specific","cooling","impreza-wrx-sti-a-line-grf-applied-b-2009-2009-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-c-2007-2012-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-c-2010-2012-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-grb-applied-a-2007-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-b-2009-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-c-2010-2012-tc-ej207-h4","impreza-wrx-sti-grb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-grb-applied-e-2013-2014-tc-ej207-h4","impreza-wrx-sti-gvb-applied-c-2007-2012-tc-ej207-h4","impreza-wrx-sti-gvb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-gvb-applied-e-2013-2014-tc-ej207-h4","mishimoto","oil-cooler-kits","oil-coolers","subaru","us1","ws112"],"price":73216,"price_min":73216,"price_max":73216,"available":true,"price_varies":false,"compare_at_price":83200,"compare_at_price_min":83200,"compare_at_price_max":83200,"compare_at_price_varies":false,"variants":[{"id":5990382895131,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-STI-08BK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX STI Oil Cooler Kit, Black - Black - GRB GVB GRF GVF - MMOC-STI-08BK","public_title":null,"options":["Default Title"],"price":73216,"weight":8853,"compare_at_price":83200,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08BK.jpg?v=1710154075"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08BK.jpg?v=1710154075","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX STI Oil Cooler Kit, Black - Black - GRB GVB GRF GVF - MMOC-STI-08BK - Rzcrewgarage","id":1351399571553,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08BK.jpg?v=1710154075"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08BK.jpg?v=1710154075","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-STI-08BK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561986273307,"title":"Mishimoto - Subaru WRX STI Thermostatic Oil Cooler Kit - GRB GVB GRF GVF - MMOC-STI-08T","handle":"mishimoto-subaru-wrx-sti-thermostatic-oil-cooler-kit-grb-gvb-grf-gvf-mmoc-sti-08t","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-STI-08T\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:09+08:00","created_at":"2018-01-24T23:24:09+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2007","2008","2009","2010","2011","2012","2013","2014","car-specific","cooling","impreza-wrx-sti-a-line-grf-applied-b-2009-2009-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-c-2007-2012-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-c-2010-2012-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-grb-applied-a-2007-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-b-2009-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-c-2010-2012-tc-ej207-h4","impreza-wrx-sti-grb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-grb-applied-e-2013-2014-tc-ej207-h4","impreza-wrx-sti-gvb-applied-c-2007-2012-tc-ej207-h4","impreza-wrx-sti-gvb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-gvb-applied-e-2013-2014-tc-ej207-h4","mishimoto","oil-cooler-kits","oil-coolers","subaru","us1","ws111"],"price":80011,"price_min":80011,"price_max":80011,"available":true,"price_varies":false,"compare_at_price":89900,"compare_at_price_min":89900,"compare_at_price_max":89900,"compare_at_price_varies":false,"variants":[{"id":5990382927899,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-STI-08T","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX STI Thermostatic Oil Cooler Kit - GRB GVB GRF GVF - MMOC-STI-08T","public_title":null,"options":["Default Title"],"price":80011,"weight":9171,"compare_at_price":89900,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08T.jpg?v=1710154075"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08T.jpg?v=1710154075","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX STI Thermostatic Oil Cooler Kit - GRB GVB GRF GVF - MMOC-STI-08T - Rzcrewgarage","id":1351399669857,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08T.jpg?v=1710154075"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08T.jpg?v=1710154075","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-STI-08T\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561986306075,"title":"Mishimoto - Subaru WRX STI Thermostatic Oil Cooler Kit, Black - Black - GRB GVB GRF GVF - MMOC-STI-08TBK","handle":"mishimoto-subaru-wrx-sti-thermostatic-oil-cooler-kit-black-black-grb-gvb-grf-gvf-mmoc-sti-08tbk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-STI-08TBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 5 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:09+08:00","created_at":"2018-01-24T23:24:11+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2007","2008","2009","2010","2011","2012","2013","2014","car-specific","cooling","impreza-wrx-sti-a-line-grf-applied-b-2009-2009-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-c-2007-2012-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-c-2010-2012-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-grb-applied-a-2007-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-b-2009-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-c-2010-2012-tc-ej207-h4","impreza-wrx-sti-grb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-grb-applied-e-2013-2014-tc-ej207-h4","impreza-wrx-sti-gvb-applied-c-2007-2012-tc-ej207-h4","impreza-wrx-sti-gvb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-gvb-applied-e-2013-2014-tc-ej207-h4","mishimoto","oil-cooler-kits","oil-coolers","subaru","us1","ws111"],"price":80011,"price_min":80011,"price_max":80011,"available":true,"price_varies":false,"compare_at_price":89900,"compare_at_price_min":89900,"compare_at_price_max":89900,"compare_at_price_varies":false,"variants":[{"id":5990382960667,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-STI-08TBK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX STI Thermostatic Oil Cooler Kit, Black - Black - GRB GVB GRF GVF - MMOC-STI-08TBK","public_title":null,"options":["Default Title"],"price":80011,"weight":9126,"compare_at_price":89900,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08TBK.jpg?v=1710154075"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08TBK.jpg?v=1710154075","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX STI Thermostatic Oil Cooler Kit, Black - Black - GRB GVB GRF GVF - MMOC-STI-08TBK - Rzcrewgarage","id":1351399735393,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08TBK.jpg?v=1710154075"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-STI-08TBK.jpg?v=1710154075","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-STI-08TBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e20+°F (16+°C) temperature drop\u003cbr\u003eMinimal pressure loss\u003cbr\u003eDirect fit for the STI\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003eStealth Black and Sleek\u003cbr\u003eSilver cooler options\u003cbr\u003eThermostatic option available\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote This oil cooler kit will only work with models with the single scroll turbo and un-equal length exhaust manifold. Models with a twin scroll turbo and equal length exhaust manifold may not be compatible with this oil cooler kit. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ257\u003cbr\u003eChassis Codes GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 20°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 150-degree -10AN Fittings\u003cbr\u003e(1) 4ft Stainless Steel Braided Hose with 90-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) M20 Stainless Steel Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eThe Subaru WRX STI provides a great balance of power, handling, and reliability. As with any vehicle, controlling fluid temperatures will ensure consistent power and engine longevity. The Mishimoto Subaru WRX STI Oil Cooler Kit is a great addition to any street or track STI. A large 19-row cooler mounts in the front bumper to provide optimal airflow and cooling efficiency. The included direct-fit mounting brackets and preassembled stainless steel lines with -10AN fittings will ensure an easy and hassle-free installation. This cooler is proven to reduce oil temperatures by 20+°F (16+°C) degrees while maintaining minimal pressure loss. For further heat protection this kit includes thermal reflective wrap for the oil lines, providing substantial heat deflection from the nearby exhaust. The Mishimoto Subaru WRX STI Oil Cooler Kit can be customized to meet your needs with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 5 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561989287963,"title":"Mishimoto - Subaru WRX Thermostatic Oil Cooler Kit - GH GE GR GV - MMOC-WRX-08T","handle":"mishimoto-subaru-wrx-thermostatic-oil-cooler-kit-gh-ge-gr-gv-mmoc-wrx-08t","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-08T\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2008-2014 Subaru WRX\u003cbr\u003eProven +25°F (+13.9°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation, functions with all stock equipment\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined application-specific sandwich plate\u003cbr\u003eWorks in conjunction with stock liquid-to-liquid heat exchanger for proper fluid warm-up and regulation\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ255\u003cbr\u003eChassis Codes GH, GE ,GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 50°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets and Spacer\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 45-degree and 90-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) 15mm CNC Sandwich Plate Spacer\u003cbr\u003e(1) Application specific M20 Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eHigh oil temperatures can wreak havoc on your high-performance flat four. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2008-2014 Subaru WRX. The WRX has a lot to offer with its turbocharged engine and fantastic AWD system, but these vehicles are not factory-equipped with an oil cooler. Properly regulated oil temperatures become even more important if you have modified your vehicle or spend time tracking your WRX. \u003cbr\u003e\u003cbr\u003eMishimoto's direct-fit oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included CNC-machined aluminum spacer provides ample room for our oil sandwich plate, making this kit compatible with the factory exhaust manifold heat shields. This kit includes preassembled stainless steel lines with -10AN fittings and a thermal reflective wrap that deflects radiant heat from the exhaust. With this setup, your WRX can achieve a 50+°F (34+°C) drop in oil temperatures with minimal pressure loss. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru WRX Oil Cooler Kit is available with a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate, for even greater control over your oil temperatures. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2008-2014 Subaru WRX\u003cbr\u003eProven +25°F (+13.9°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation, functions with all stock equipment\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined application-specific sandwich plate\u003cbr\u003eWorks in conjunction with stock liquid-to-liquid heat exchanger for proper fluid warm-up and regulation\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ255\u003cbr\u003eChassis Codes GH, GE ,GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 50°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets and Spacer\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 45-degree and 90-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) 15mm CNC Sandwich Plate Spacer\u003cbr\u003e(1) Application specific M20 Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eHigh oil temperatures can wreak havoc on your high-performance flat four. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2008-2014 Subaru WRX. The WRX has a lot to offer with its turbocharged engine and fantastic AWD system, but these vehicles are not factory-equipped with an oil cooler. Properly regulated oil temperatures become even more important if you have modified your vehicle or spend time tracking your WRX. \u003cbr\u003e\u003cbr\u003eMishimoto's direct-fit oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included CNC-machined aluminum spacer provides ample room for our oil sandwich plate, making this kit compatible with the factory exhaust manifold heat shields. This kit includes preassembled stainless steel lines with -10AN fittings and a thermal reflective wrap that deflects radiant heat from the exhaust. With this setup, your WRX can achieve a 50+°F (34+°C) drop in oil temperatures with minimal pressure loss. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru WRX Oil Cooler Kit is available with a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate, for even greater control over your oil temperatures. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 4 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:44+08:00","created_at":"2018-01-24T23:24:45+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2007","2008","2009","2010","2011","2012","2013","2014","car-specific","cooling","impreza-wrx-hatch-gh6-applied-e-2008-2014-tc-ej255-h4","impreza-wrx-sedan-ge6-applied-e-2008-2014-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-b-2009-2009-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-c-2007-2012-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-c-2010-2012-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-grb-applied-a-2007-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-b-2009-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-c-2010-2012-tc-ej207-h4","impreza-wrx-sti-grb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-grb-applied-e-2013-2014-tc-ej207-h4","impreza-wrx-sti-gvb-applied-c-2007-2012-tc-ej207-h4","impreza-wrx-sti-gvb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-gvb-applied-e-2013-2014-tc-ej207-h4","mishimoto","oil-cooler-kits","oil-coolers","subaru","us1","ws111"],"price":85707,"price_min":85707,"price_max":85707,"available":true,"price_varies":false,"compare_at_price":96300,"compare_at_price_min":96300,"compare_at_price_max":96300,"compare_at_price_varies":false,"variants":[{"id":5990386466843,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-WRX-08T","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX Thermostatic Oil Cooler Kit - GH GE GR GV - MMOC-WRX-08T","public_title":null,"options":["Default Title"],"price":85707,"weight":9216,"compare_at_price":96300,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-08T.jpg?v=1710154094"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-08T.jpg?v=1710154094","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX Thermostatic Oil Cooler Kit - GH GE GR GV - MMOC-WRX-08T - Rzcrewgarage","id":1351400882273,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-08T.jpg?v=1710154094"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-08T.jpg?v=1710154094","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-08T\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2008-2014 Subaru WRX\u003cbr\u003eProven +25°F (+13.9°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation, functions with all stock equipment\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined application-specific sandwich plate\u003cbr\u003eWorks in conjunction with stock liquid-to-liquid heat exchanger for proper fluid warm-up and regulation\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ255\u003cbr\u003eChassis Codes GH, GE ,GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 50°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets and Spacer\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 45-degree and 90-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) 15mm CNC Sandwich Plate Spacer\u003cbr\u003e(1) Application specific M20 Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eHigh oil temperatures can wreak havoc on your high-performance flat four. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2008-2014 Subaru WRX. The WRX has a lot to offer with its turbocharged engine and fantastic AWD system, but these vehicles are not factory-equipped with an oil cooler. Properly regulated oil temperatures become even more important if you have modified your vehicle or spend time tracking your WRX. \u003cbr\u003e\u003cbr\u003eMishimoto's direct-fit oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included CNC-machined aluminum spacer provides ample room for our oil sandwich plate, making this kit compatible with the factory exhaust manifold heat shields. This kit includes preassembled stainless steel lines with -10AN fittings and a thermal reflective wrap that deflects radiant heat from the exhaust. With this setup, your WRX can achieve a 50+°F (34+°C) drop in oil temperatures with minimal pressure loss. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru WRX Oil Cooler Kit is available with a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate, for even greater control over your oil temperatures. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2008-2014 Subaru WRX\u003cbr\u003eProven +25°F (+13.9°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation, functions with all stock equipment\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined application-specific sandwich plate\u003cbr\u003eWorks in conjunction with stock liquid-to-liquid heat exchanger for proper fluid warm-up and regulation\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ255\u003cbr\u003eChassis Codes GH, GE ,GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 50°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets and Spacer\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 45-degree and 90-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) 15mm CNC Sandwich Plate Spacer\u003cbr\u003e(1) Application specific M20 Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eHigh oil temperatures can wreak havoc on your high-performance flat four. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2008-2014 Subaru WRX. The WRX has a lot to offer with its turbocharged engine and fantastic AWD system, but these vehicles are not factory-equipped with an oil cooler. Properly regulated oil temperatures become even more important if you have modified your vehicle or spend time tracking your WRX. \u003cbr\u003e\u003cbr\u003eMishimoto's direct-fit oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included CNC-machined aluminum spacer provides ample room for our oil sandwich plate, making this kit compatible with the factory exhaust manifold heat shields. This kit includes preassembled stainless steel lines with -10AN fittings and a thermal reflective wrap that deflects radiant heat from the exhaust. With this setup, your WRX can achieve a 50+°F (34+°C) drop in oil temperatures with minimal pressure loss. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru WRX Oil Cooler Kit is available with a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate, for even greater control over your oil temperatures. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 4 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":561989320731,"title":"Mishimoto - Subaru WRX Thermostatic Oil Cooler Kit, Black - Black - GH GE GR GV - MMOC-WRX-08TBK","handle":"mishimoto-subaru-wrx-thermostatic-oil-cooler-kit-black-black-gh-ge-gr-gv-mmoc-wrx-08tbk","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-08TBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2008-2014 Subaru WRX\u003cbr\u003eProven +25°F (+13.9°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation, functions with all stock equipment\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined application-specific sandwich plate\u003cbr\u003eWorks in conjunction with stock liquid-to-liquid heat exchanger for proper fluid warm-up and regulation\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ255\u003cbr\u003eChassis Codes GH, GE ,GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 50°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets and Spacer\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 45-degree and 90-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) 15mm CNC Sandwich Plate Spacer\u003cbr\u003e(1) Application specific M20 Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eHigh oil temperatures can wreak havoc on your high-performance flat four. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2008-2014 Subaru WRX. The WRX has a lot to offer with its turbocharged engine and fantastic AWD system, but these vehicles are not factory-equipped with an oil cooler. Properly regulated oil temperatures become even more important if you have modified your vehicle or spend time tracking your WRX. \u003cbr\u003e\u003cbr\u003eMishimoto's direct-fit oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included CNC-machined aluminum spacer provides ample room for our oil sandwich plate, making this kit compatible with the factory exhaust manifold heat shields. This kit includes preassembled stainless steel lines with -10AN fittings and a thermal reflective wrap that deflects radiant heat from the exhaust. With this setup, your WRX can achieve a 50+°F (34+°C) drop in oil temperatures with minimal pressure loss. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru WRX Oil Cooler Kit is available with a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate, for even greater control over your oil temperatures. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2008-2014 Subaru WRX\u003cbr\u003eProven +25°F (+13.9°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation, functions with all stock equipment\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined application-specific sandwich plate\u003cbr\u003eWorks in conjunction with stock liquid-to-liquid heat exchanger for proper fluid warm-up and regulation\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ255\u003cbr\u003eChassis Codes GH, GE ,GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 50°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets and Spacer\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 45-degree and 90-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) 15mm CNC Sandwich Plate Spacer\u003cbr\u003e(1) Application specific M20 Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eHigh oil temperatures can wreak havoc on your high-performance flat four. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2008-2014 Subaru WRX. The WRX has a lot to offer with its turbocharged engine and fantastic AWD system, but these vehicles are not factory-equipped with an oil cooler. Properly regulated oil temperatures become even more important if you have modified your vehicle or spend time tracking your WRX. \u003cbr\u003e\u003cbr\u003eMishimoto's direct-fit oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included CNC-machined aluminum spacer provides ample room for our oil sandwich plate, making this kit compatible with the factory exhaust manifold heat shields. This kit includes preassembled stainless steel lines with -10AN fittings and a thermal reflective wrap that deflects radiant heat from the exhaust. With this setup, your WRX can achieve a 50+°F (34+°C) drop in oil temperatures with minimal pressure loss. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru WRX Oil Cooler Kit is available with a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate, for even greater control over your oil temperatures. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 5 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-01-24T23:24:45+08:00","created_at":"2018-01-24T23:24:46+08:00","vendor":"Mishimoto","type":"Oil Coolers","tags":["2007","2008","2009","2010","2011","2012","2013","2014","car-specific","cooling","impreza-wrx-hatch-gh6-applied-e-2008-2014-tc-ej255-h4","impreza-wrx-sedan-ge6-applied-e-2008-2014-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-b-2009-2009-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-c-2007-2012-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-grf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-c-2010-2012-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-d-2012-2013-tc-ej255-h4","impreza-wrx-sti-a-line-gvf-applied-e-2013-2014-tc-ej255-h4","impreza-wrx-sti-grb-applied-a-2007-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-b-2009-2009-tc-ej207-h4","impreza-wrx-sti-grb-applied-c-2010-2012-tc-ej207-h4","impreza-wrx-sti-grb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-grb-applied-e-2013-2014-tc-ej207-h4","impreza-wrx-sti-gvb-applied-c-2007-2012-tc-ej207-h4","impreza-wrx-sti-gvb-applied-d-2012-2013-tc-ej207-h4","impreza-wrx-sti-gvb-applied-e-2013-2014-tc-ej207-h4","mishimoto","oil-cooler-kits","oil-coolers","subaru","us1","ws111"],"price":85707,"price_min":85707,"price_max":85707,"available":true,"price_varies":false,"compare_at_price":96300,"compare_at_price_min":96300,"compare_at_price_max":96300,"compare_at_price_varies":false,"variants":[{"id":5990386499611,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MMOC-WRX-08TBK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mishimoto - Subaru WRX Thermostatic Oil Cooler Kit, Black - Black - GH GE GR GV - MMOC-WRX-08TBK","public_title":null,"options":["Default Title"],"price":85707,"weight":9216,"compare_at_price":96300,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-08TBK.jpg?v=1710154094"],"featured_image":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-08TBK.jpg?v=1710154094","options":["Title"],"media":[{"alt":"Mishimoto - Subaru WRX Thermostatic Oil Cooler Kit, Black - Black - GH GE GR GV - MMOC-WRX-08TBK - Rzcrewgarage","id":1351400915041,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-08TBK.jpg?v=1710154094"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/rzcrewgarage.com\/cdn\/shop\/products\/MMOC-WRX-08TBK.jpg?v=1710154094","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Mishimoto\u003cbr\u003ePart Number: MMOC-WRX-08TBK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2008-2014 Subaru WRX\u003cbr\u003eProven +25°F (+13.9°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation, functions with all stock equipment\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined application-specific sandwich plate\u003cbr\u003eWorks in conjunction with stock liquid-to-liquid heat exchanger for proper fluid warm-up and regulation\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ255\u003cbr\u003eChassis Codes GH, GE ,GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 50°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets and Spacer\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 45-degree and 90-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) 15mm CNC Sandwich Plate Spacer\u003cbr\u003e(1) Application specific M20 Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eHigh oil temperatures can wreak havoc on your high-performance flat four. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2008-2014 Subaru WRX. The WRX has a lot to offer with its turbocharged engine and fantastic AWD system, but these vehicles are not factory-equipped with an oil cooler. Properly regulated oil temperatures become even more important if you have modified your vehicle or spend time tracking your WRX. \u003cbr\u003e\u003cbr\u003eMishimoto's direct-fit oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included CNC-machined aluminum spacer provides ample room for our oil sandwich plate, making this kit compatible with the factory exhaust manifold heat shields. This kit includes preassembled stainless steel lines with -10AN fittings and a thermal reflective wrap that deflects radiant heat from the exhaust. With this setup, your WRX can achieve a 50+°F (34+°C) drop in oil temperatures with minimal pressure loss. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru WRX Oil Cooler Kit is available with a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate, for even greater control over your oil temperatures. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eDirect fit for the 2008-2014 Subaru WRX\u003cbr\u003eProven +25°F (+13.9°C) drop in oil temperature\u003cbr\u003eFull bolt-on oil cooling solution for street and track vehicles\u003cbr\u003eNo modification necessary for installation, functions with all stock equipment\u003cbr\u003e19-row oil cooler strategically mounted in the lower grille for maximum airflow\u003cbr\u003eCNC-machined application-specific sandwich plate\u003cbr\u003eWorks in conjunction with stock liquid-to-liquid heat exchanger for proper fluid warm-up and regulation\u003cbr\u003eIncludes preassembled stainless steel braided oil lines with -10AN fittings\u003cbr\u003eCooler available in Sleek Silver or Stealth Black\u003cbr\u003eIncreases oil capacity by 0.75 qt\u003cbr\u003eThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unit\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eMaterial 6061 Aluminum\u003cbr\u003eCore Height 5.43\"\u003cbr\u003eRows 19 Cooler \u003cbr\u003eConstruction Stacked-plate \u003cbr\u003eNote Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCore Thickness 1.97\"\u003cbr\u003eCore Length 11\"\u003cbr\u003eFitting Size -10AN\u003cbr\u003eEngine Codes EJ255\u003cbr\u003eChassis Codes GH, GE ,GR ,GV\u003cbr\u003ePressure Drop 3-4 PSI\u003cbr\u003eInstall Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft\/lbs (operating range). Do not exceed the maximum torque rating of 35 ft\/lbs.\u003cbr\u003eCaution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.\u003cbr\u003eIncrease In Oil Capacity 0.65 qt\u003cbr\u003eTemp Difference 50°F\u003cbr\u003ePurchase Includes \u003cbr\u003e(3) Application Specific Mounting Brackets and Spacer\u003cbr\u003e(1) 19-Row Oil Cooler (silver or black)\u003cbr\u003e(1) 2ft, 11in Stainless Steel Braided Hose with 45-degree and 150-degree -10AN Fittings\u003cbr\u003e(1) 3ft, 6in Stainless Steel Braided Hose with 45-degree and 90-degree -10AN Fittings\u003cbr\u003e(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)\u003cbr\u003e(1) 15mm CNC Sandwich Plate Spacer\u003cbr\u003e(1) Application specific M20 Sandwich Plate Adapter\u003cbr\u003e(2) M20 x -10AN Straight Fittings\u003cbr\u003e(1) 2ft of thermal reflective wrap\u003cbr\u003e(1) Mounting Hardware Set\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003cbr\u003eHigh oil temperatures can wreak havoc on your high-performance flat four. Protect your investment with the Mishimoto direct-fit oil cooler kit designed specifically for the 2008-2014 Subaru WRX. The WRX has a lot to offer with its turbocharged engine and fantastic AWD system, but these vehicles are not factory-equipped with an oil cooler. Properly regulated oil temperatures become even more important if you have modified your vehicle or spend time tracking your WRX. \u003cbr\u003e\u003cbr\u003eMishimoto's direct-fit oil cooler is engineered to reduce oil temperatures and extend the life of your engine. For optimal airflow and cooling, this kit includes a large 19-row cooler that is mounted in the front bumper with robust application-specific brackets. The included CNC-machined aluminum spacer provides ample room for our oil sandwich plate, making this kit compatible with the factory exhaust manifold heat shields. This kit includes preassembled stainless steel lines with -10AN fittings and a thermal reflective wrap that deflects radiant heat from the exhaust. With this setup, your WRX can achieve a 50+°F (34+°C) drop in oil temperatures with minimal pressure loss. \u003cbr\u003e\u003cbr\u003eThe Mishimoto Subaru WRX Oil Cooler Kit is available with a Sleek Silver or Stealth Black cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate, for even greater control over your oil temperatures. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA: \u003c\/strong\u003eTaxes are included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our US Warehouse to any global location. Shipping via DHL\/Fedex within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 5 left in stock!\u003c!--split--\u003e\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}